diff options
Diffstat (limited to 'install-files/openstack/usr/share/openstack/nova/nova.conf')
-rw-r--r-- | install-files/openstack/usr/share/openstack/nova/nova.conf | 4008 |
1 files changed, 0 insertions, 4008 deletions
diff --git a/install-files/openstack/usr/share/openstack/nova/nova.conf b/install-files/openstack/usr/share/openstack/nova/nova.conf deleted file mode 100644 index f2db93fc..00000000 --- a/install-files/openstack/usr/share/openstack/nova/nova.conf +++ /dev/null @@ -1,4008 +0,0 @@ -[DEFAULT] - -# -# From oslo.messaging -# - -# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. -# The "host" option should point or resolve to this address. (string value) -#rpc_zmq_bind_address = * - -# MatchMaker driver. (string value) -#rpc_zmq_matchmaker = oslo_messaging._drivers.matchmaker.MatchMakerLocalhost - -# ZeroMQ receiver listening port. (integer value) -#rpc_zmq_port = 9501 - -# Number of ZeroMQ contexts, defaults to 1. (integer value) -#rpc_zmq_contexts = 1 - -# Maximum number of ingress messages to locally buffer per topic. Default is -# unlimited. (integer value) -#rpc_zmq_topic_backlog = <None> - -# Directory for holding IPC sockets. (string value) -#rpc_zmq_ipc_dir = /var/run/openstack - -# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match -# "host" option, if running Nova. (string value) -#rpc_zmq_host = localhost - -# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. -# (integer value) -#rpc_cast_timeout = 30 - -# Heartbeat frequency. (integer value) -#matchmaker_heartbeat_freq = 300 - -# Heartbeat time-to-live. (integer value) -#matchmaker_heartbeat_ttl = 600 - -# Size of RPC thread pool. (integer value) -#rpc_thread_pool_size = 64 - -# Driver or drivers to handle sending notifications. (multi valued) -notification_driver = messagingv2 - -# AMQP topic used for OpenStack notifications. (list value) -# Deprecated group/name - [rpc_notifier2]/topics -#notification_topics = notifications - -# Seconds to wait for a response from a call. (integer value) -#rpc_response_timeout = 60 - -# A URL representing the messaging driver to use and its full configuration. If -# not set, we fall back to the rpc_backend option and driver specific -# configuration. (string value) -#transport_url = <None> - -# The messaging driver to use, defaults to rabbit. Other drivers include qpid -# and zmq. (string value) -rpc_backend = rabbit - -# The default exchange under which topics are scoped. May be overridden by an -# exchange name specified in the transport_url option. (string value) -#control_exchange = openstack - - -# -# Options defined in nova.availability_zones -# - -# The availability_zone to show internal services under -# (string value) -#internal_service_availability_zone=internal - -# Default compute node availability_zone (string value) -#default_availability_zone=nova - - -# -# Options defined in nova.crypto -# - -# Filename of root CA (string value) -#ca_file=cacert.pem - -# Filename of private key (string value) -#key_file=private/cakey.pem - -# Filename of root Certificate Revocation List (string value) -#crl_file=crl.pem - -# Where we keep our keys (string value) -#keys_path=$state_path/keys - -# Where we keep our root CA (string value) -#ca_path=$state_path/CA - -# Should we use a CA for each project? (boolean value) -#use_project_ca=false - -# Subject for certificate for users, %s for project, user, -# timestamp (string value) -#user_cert_subject=/C=US/ST=California/O=OpenStack/OU=NovaDev/CN=%.16s-%.16s-%s - -# Subject for certificate for projects, %s for project, -# timestamp (string value) -#project_cert_subject=/C=US/ST=California/O=OpenStack/OU=NovaDev/CN=project-ca-%.16s-%s - - -# -# Options defined in nova.exception -# - -# Make exception message format errors fatal (boolean value) -#fatal_exception_format_errors=false - - -# -# Options defined in nova.netconf -# - -# IP address of this host (string value) -my_ip={{ MANAGEMENT_INTERFACE_IP_ADDRESS }} - -# Block storage IP address of this host (string value) -#my_block_storage_ip=$my_ip - -# Name of this node. This can be an opaque identifier. It is -# not necessarily a hostname, FQDN, or IP address. However, -# the node name must be valid within an AMQP key, and if using -# ZeroMQ, a valid hostname, FQDN, or IP address (string value) -#host=nova - -# Use IPv6 (boolean value) -#use_ipv6=false - - -# -# Options defined in nova.notifications -# - -# If set, send compute.instance.update notifications on -# instance state changes. Valid values are None for no -# notifications, "vm_state" for notifications on VM state -# changes, or "vm_and_task_state" for notifications on VM and -# task state changes. (string value) -notify_on_state_change=vm_and_task_state - -# If set, send api.fault notifications on caught exceptions in -# the API service. (boolean value) -#notify_api_faults=false - -# Default notification level for outgoing notifications -# (string value) -#default_notification_level=INFO - -# Default publisher_id for outgoing notifications (string -# value) -#default_publisher_id=<None> - - -# -# Options defined in nova.paths -# - -# Directory where the nova python module is installed (string -# value) -#pybasedir=/usr/lib/python/site-packages - -# Directory where nova binaries are installed (string value) -#bindir=/usr/local/bin - -# Top-level directory for maintaining nova's state (string -# value) -state_path=/var/lib/nova - - -# -# Options defined in nova.quota -# - -# Number of instances allowed per project (integer value) -#quota_instances=10 - -# Number of instance cores allowed per project (integer value) -#quota_cores=20 - -# Megabytes of instance RAM allowed per project (integer -# value) -#quota_ram=51200 - -# Number of floating IPs allowed per project (integer value) -#quota_floating_ips=10 - -# Number of fixed IPs allowed per project (this should be at -# least the number of instances allowed) (integer value) -#quota_fixed_ips=-1 - -# Number of metadata items allowed per instance (integer -# value) -#quota_metadata_items=128 - -# Number of injected files allowed (integer value) -#quota_injected_files=5 - -# Number of bytes allowed per injected file (integer value) -#quota_injected_file_content_bytes=10240 - -# Length of injected file path (integer value) -#quota_injected_file_path_length=255 - -# Number of security groups per project (integer value) -#quota_security_groups=10 - -# Number of security rules per security group (integer value) -#quota_security_group_rules=20 - -# Number of key pairs per user (integer value) -#quota_key_pairs=100 - -# Number of server groups per project (integer value) -#quota_server_groups=10 - -# Number of servers per server group (integer value) -#quota_server_group_members=10 - -# Number of seconds until a reservation expires (integer -# value) -#reservation_expire=86400 - -# Count of reservations until usage is refreshed. This -# defaults to 0(off) to avoid additional load but it is useful -# to turn on to help keep quota usage up to date and reduce -# the impact of out of sync usage issues. (integer value) -#until_refresh=0 - -# Number of seconds between subsequent usage refreshes. This -# defaults to 0(off) to avoid additional load but it is useful -# to turn on to help keep quota usage up to date and reduce -# the impact of out of sync usage issues. Note that quotas are -# not updated on a periodic task, they will update on a new -# reservation if max_age has passed since the last reservation -# (integer value) -#max_age=0 - -# Default driver to use for quota checks (string value) -#quota_driver=nova.quota.DbQuotaDriver - - -# -# Options defined in nova.service -# - -# Seconds between nodes reporting state to datastore (integer -# value) -#report_interval=10 - -# Enable periodic tasks (boolean value) -#periodic_enable=true - -# Range of seconds to randomly delay when starting the -# periodic task scheduler to reduce stampeding. (Disable by -# setting to 0) (integer value) -#periodic_fuzzy_delay=60 - -# A list of APIs to enable by default (list value) -enabled_apis=ec2,osapi_compute,metadata - -# A list of APIs with enabled SSL (list value) -#enabled_ssl_apis= - -# The IP address on which the EC2 API will listen. (string -# value) -#ec2_listen=0.0.0.0 - -# The port on which the EC2 API will listen. (integer value) -#ec2_listen_port=8773 - -# Number of workers for EC2 API service. The default will be -# equal to the number of CPUs available. (integer value) -#ec2_workers=<None> - -# The IP address on which the OpenStack API will listen. -# (string value) -#osapi_compute_listen=0.0.0.0 - -# The port on which the OpenStack API will listen. (integer -# value) -#osapi_compute_listen_port=8774 - -# Number of workers for OpenStack API service. The default -# will be the number of CPUs available. (integer value) -#osapi_compute_workers=<None> - -# OpenStack metadata service manager (string value) -#metadata_manager=nova.api.manager.MetadataManager - -# The IP address on which the metadata API will listen. -# (string value) -#metadata_listen=0.0.0.0 - -# The port on which the metadata API will listen. (integer -# value) -#metadata_listen_port=8775 - -# Number of workers for metadata service. The default will be -# the number of CPUs available. (integer value) -#metadata_workers=<None> - -# Full class name for the Manager for compute (string value) -compute_manager={{ COMPUTE_MANAGER }} - -# Full class name for the Manager for console proxy (string -# value) -#console_manager=nova.console.manager.ConsoleProxyManager - -# Manager for console auth (string value) -#consoleauth_manager=nova.consoleauth.manager.ConsoleAuthManager - -# Full class name for the Manager for cert (string value) -#cert_manager=nova.cert.manager.CertManager - -# Full class name for the Manager for network (string value) -#network_manager=nova.network.manager.VlanManager - -# Full class name for the Manager for scheduler (string value) -#scheduler_manager=nova.scheduler.manager.SchedulerManager - -# Maximum time since last check-in for up service (integer -# value) -#service_down_time=60 - - -# -# Options defined in nova.utils -# - -# Whether to log monkey patching (boolean value) -#monkey_patch=false - -# List of modules/decorators to monkey patch (list value) -#monkey_patch_modules=nova.api.ec2.cloud:nova.notifications.notify_decorator,nova.compute.api:nova.notifications.notify_decorator - -# Length of generated instance admin passwords (integer value) -#password_length=12 - -# Time period to generate instance usages for. Time period -# must be hour, day, month or year (string value) -instance_usage_audit_period=hour - -# Path to the rootwrap configuration file to use for running -# commands as root (string value) -rootwrap_config=/etc/nova/rootwrap.conf - -# Explicitly specify the temporary working directory (string -# value) -#tempdir=<None> - - -# -# Options defined in nova.wsgi -# - -# File name for the paste.deploy config for nova-api (string -# value) -api_paste_config=api-paste.ini - -# A python format string that is used as the template to -# generate log lines. The following values can be formatted -# into it: client_ip, date_time, request_line, status_code, -# body_length, wall_seconds. (string value) -#wsgi_log_format=%(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f - -# CA certificate file to use to verify connecting clients -# (string value) -#ssl_ca_file=<None> - -# SSL certificate of API server (string value) -#ssl_cert_file=<None> - -# SSL private key of API server (string value) -#ssl_key_file=<None> - -# Sets the value of TCP_KEEPIDLE in seconds for each server -# socket. Not supported on OS X. (integer value) -#tcp_keepidle=600 - -# Size of the pool of greenthreads used by wsgi (integer -# value) -#wsgi_default_pool_size=1000 - -# Maximum line size of message headers to be accepted. -# max_header_line may need to be increased when using large -# tokens (typically those generated by the Keystone v3 API -# with big service catalogs). (integer value) -#max_header_line=16384 - -# If False, closes the client socket connection explicitly. -# (boolean value) -#wsgi_keep_alive=true - -# Timeout for client connections' socket operations. If an -# incoming connection is idle for this number of seconds it -# will be closed. A value of '0' means wait forever. (integer -# value) -#client_socket_timeout=900 - - -# -# Options defined in nova.api.auth -# - -# Whether to use per-user rate limiting for the api. This -# option is only used by v2 api. Rate limiting is removed from -# v3 api. (boolean value) -#api_rate_limit=false - -# The strategy to use for auth: keystone, noauth -# (deprecated), or noauth2. Both noauth and noauth2 are -# designed for testing only, as they do no actual credential -# checking. noauth provides administrative credentials -# regardless of the passed in user, noauth2 only does if -# 'admin' is specified as the username. (string value) -auth_strategy=keystone - -# Treat X-Forwarded-For as the canonical remote address. Only -# enable this if you have a sanitizing proxy. (boolean value) -#use_forwarded_for=false - - -# -# Options defined in nova.api.ec2 -# - -# Number of failed auths before lockout. (integer value) -#lockout_attempts=5 - -# Number of minutes to lockout if triggered. (integer value) -#lockout_minutes=15 - -# Number of minutes for lockout window. (integer value) -#lockout_window=15 - -# URL to get token from ec2 request. (string value) -#keystone_ec2_url=http://localhost:5000/v2.0/ec2tokens - -# Return the IP address as private dns hostname in describe -# instances (boolean value) -#ec2_private_dns_show_ip=false - -# Validate security group names according to EC2 specification -# (boolean value) -#ec2_strict_validation=true - -# Time in seconds before ec2 timestamp expires (integer value) -#ec2_timestamp_expiry=300 - -# Disable SSL certificate verification. (boolean value) -#keystone_ec2_insecure=false - - -# -# Options defined in nova.api.ec2.cloud -# - -# The IP address of the EC2 API server (string value) -#ec2_host=$my_ip - -# The internal IP address of the EC2 API server (string value) -#ec2_dmz_host=$my_ip - -# The port of the EC2 API server (integer value) -#ec2_port=8773 - -# The protocol to use when connecting to the EC2 API server -# (http, https) (string value) -#ec2_scheme=http - -# The path prefix used to call the ec2 API server (string -# value) -#ec2_path=/ - -# List of region=fqdn pairs separated by commas (list value) -#region_list= - - -# -# Options defined in nova.api.metadata.base -# - -# List of metadata versions to skip placing into the config -# drive (string value) -#config_drive_skip_versions=1.0 2007-01-19 2007-03-01 2007-08-29 2007-10-10 2007-12-15 2008-02-01 2008-09-01 - -# Driver to use for vendor data (string value) -#vendordata_driver=nova.api.metadata.vendordata_json.JsonFileVendorData - - -# -# Options defined in nova.api.metadata.handler -# - -# Time in seconds to cache metadata; 0 to disable metadata -# caching entirely (not recommended). Increasingthis should -# improve response times of the metadata API when under heavy -# load. Higher values may increase memoryusage and result in -# longer times for host metadata changes to take effect. -# (integer value) -#metadata_cache_expiration=15 - - -# -# Options defined in nova.api.metadata.vendordata_json -# - -# File to load JSON formatted vendor data from (string value) -#vendordata_jsonfile_path=<None> - - -# -# Options defined in nova.api.openstack.common -# - -# The maximum number of items returned in a single response -# from a collection resource (integer value) -#osapi_max_limit=1000 - -# Base URL that will be presented to users in links to the -# OpenStack Compute API (string value) -#osapi_compute_link_prefix=<None> - -# Base URL that will be presented to users in links to glance -# resources (string value) -#osapi_glance_link_prefix=<None> - - -# -# Options defined in nova.api.openstack.compute -# - -# Permit instance snapshot operations. (boolean value) -#allow_instance_snapshots=true - - -# -# Options defined in nova.api.openstack.compute.contrib -# - -# Specify list of extensions to load when using -# osapi_compute_extension option with -# nova.api.openstack.compute.contrib.select_extensions (list -# value) -#osapi_compute_ext_list= - - -# -# Options defined in nova.api.openstack.compute.contrib.fping -# - -# Full path to fping. (string value) -#fping_path=/usr/sbin/fping - - -# -# Options defined in nova.api.openstack.compute.contrib.os_tenant_networks -# - -# Enables or disables quota checking for tenant networks -# (boolean value) -#enable_network_quota=false - -# Control for checking for default networks (string value) -#use_neutron_default_nets=False - -# Default tenant id when creating neutron networks (string -# value) -#neutron_default_tenant_id=default - -# Number of private networks allowed per project (integer -# value) -#quota_networks=3 - - -# -# Options defined in nova.api.openstack.compute.extensions -# - -# osapi compute extension to load (multi valued) -osapi_compute_extension=nova.api.openstack.compute.contrib.standard_extensions - - -# -# Options defined in nova.api.openstack.compute.plugins.v3.hide_server_addresses -# - -# List of instance states that should hide network info (list -# value) -#osapi_hide_server_address_states=building - - -# -# Options defined in nova.api.openstack.compute.servers -# - -# Enables returning of the instance password by the relevant -# server API calls such as create, rebuild or rescue, If the -# hypervisor does not support password injection then the -# password returned will not be correct (boolean value) -#enable_instance_password=true - - -# -# Options defined in nova.cert.rpcapi -# - -# The topic cert nodes listen on (string value) -#cert_topic=cert - - -# -# Options defined in nova.cloudpipe.pipelib -# - -# Image ID used when starting up a cloudpipe vpn server -# (string value) -#vpn_image_id=0 - -# Flavor for vpn instances (string value) -#vpn_flavor=m1.tiny - -# Template for cloudpipe instance boot script (string value) -#boot_script_template=$pybasedir/nova/cloudpipe/bootscript.template - -# Network to push into openvpn config (string value) -#dmz_net=10.0.0.0 - -# Netmask to push into openvpn config (string value) -#dmz_mask=255.255.255.0 - -# Suffix to add to project name for vpn key and secgroups -# (string value) -#vpn_key_suffix=-vpn - - -# -# Options defined in nova.cmd.novnc -# - -# Record sessions to FILE.[session_number] (boolean value) -#record=false - -# Become a daemon (background process) (boolean value) -#daemon=false - -# Disallow non-encrypted connections (boolean value) -#ssl_only=false - -# Source is ipv6 (boolean value) -#source_is_ipv6=false - -# SSL certificate file (string value) -#cert=self.pem - -# SSL key file (if separate from cert) (string value) -#key=<None> - -# Run webserver on same port. Serve files from DIR. (string -# value) -#web=/usr/share/spice-html5 - - -# -# Options defined in nova.cmd.novncproxy -# - -# Host on which to listen for incoming requests (string value) -#novncproxy_host=0.0.0.0 - -# Port on which to listen for incoming requests (integer -# value) -#novncproxy_port=6080 - - -# -# Options defined in nova.compute.api -# - -# Allow destination machine to match source for resize. Useful -# when testing in single-host environments. (boolean value) -#allow_resize_to_same_host=false - -# Allow migrate machine to the same host. Useful when testing -# in single-host environments. (boolean value) -#allow_migrate_to_same_host=false - -# Availability zone to use when user doesn't specify one -# (string value) -#default_schedule_zone=<None> - -# These are image properties which a snapshot should not -# inherit from an instance (list value) -#non_inheritable_image_properties=cache_in_nova,bittorrent - -# Kernel image that indicates not to use a kernel, but to use -# a raw disk image instead (string value) -#null_kernel=nokernel - -# When creating multiple instances with a single request using -# the os-multiple-create API extension, this template will be -# used to build the display name for each instance. The -# benefit is that the instances end up with different -# hostnames. To restore legacy behavior of every instance -# having the same name, set this option to "%(name)s". Valid -# keys for the template are: name, uuid, count. (string value) -#multi_instance_display_name_template=%(name)s-%(count)d - -# Maximum number of devices that will result in a local image -# being created on the hypervisor node. Setting this to 0 -# means nova will allow only boot from volume. A negative -# number means unlimited. (integer value) -#max_local_block_devices=3 - - -# -# Options defined in nova.compute.flavors -# - -# Default flavor to use for the EC2 API only. The Nova API -# does not support a default flavor. (string value) -#default_flavor=m1.small - - -# -# Options defined in nova.compute.manager -# - -# Console proxy host to use to connect to instances on this -# host. (string value) -#console_host=nova - -# Name of network to use to set access IPs for instances -# (string value) -#default_access_ip_network_name=<None> - -# Whether to batch up the application of IPTables rules during -# a host restart and apply all at the end of the init phase -# (boolean value) -#defer_iptables_apply=false - -# Where instances are stored on disk (string value) -#instances_path=$state_path/instances - -# Generate periodic compute.instance.exists notifications -# (boolean value) -instance_usage_audit= True - -# Number of 1 second retries needed in live_migration (integer -# value) -#live_migration_retry_count=30 - -# Whether to start guests that were running before the host -# rebooted (boolean value) -#resume_guests_state_on_host_boot=false - -# Number of times to retry network allocation on failures -# (integer value) -#network_allocate_retries=0 - -# Maximum number of instance builds to run concurrently -# (integer value) -#max_concurrent_builds=10 - -# Number of times to retry block device allocation on failures -# (integer value) -#block_device_allocate_retries=60 - -# The number of times to attempt to reap an instance's files. -# (integer value) -#maximum_instance_delete_attempts=5 - -# Interval to pull network bandwidth usage info. Not supported -# on all hypervisors. Set to -1 to disable. Setting this to 0 -# will run at the default rate. (integer value) -#bandwidth_poll_interval=600 - -# Interval to sync power states between the database and the -# hypervisor. Set to -1 to disable. Setting this to 0 will run -# at the default rate. (integer value) -#sync_power_state_interval=600 - -# Number of seconds between instance network information cache -# updates (integer value) -#heal_instance_info_cache_interval=60 - -# Interval in seconds for reclaiming deleted instances -# (integer value) -#reclaim_instance_interval=0 - -# Interval in seconds for gathering volume usages (integer -# value) -#volume_usage_poll_interval=0 - -# Interval in seconds for polling shelved instances to -# offload. Set to -1 to disable.Setting this to 0 will run at -# the default rate. (integer value) -#shelved_poll_interval=3600 - -# Time in seconds before a shelved instance is eligible for -# removing from a host. -1 never offload, 0 offload when -# shelved (integer value) -#shelved_offload_time=0 - -# Interval in seconds for retrying failed instance file -# deletes. Set to -1 to disable. Setting this to 0 will run at -# the default rate. (integer value) -#instance_delete_interval=300 - -# Waiting time interval (seconds) between block device -# allocation retries on failures (integer value) -#block_device_allocate_retries_interval=3 - -# Waiting time interval (seconds) between sending the -# scheduler a list of current instance UUIDs to verify that -# its view of instances is in sync with nova. If the CONF -# option `scheduler_tracks_instance_changes` is False, -# changing this option will have no effect. (integer value) -#scheduler_instance_sync_interval=120 - -# Action to take if a running deleted instance is detected. -# Valid options are 'noop', 'log', 'shutdown', or 'reap'. Set -# to 'noop' to take no action. (string value) -#running_deleted_instance_action=reap - -# Number of seconds to wait between runs of the cleanup task. -# (integer value) -#running_deleted_instance_poll_interval=1800 - -# Number of seconds after being deleted when a running -# instance should be considered eligible for cleanup. (integer -# value) -#running_deleted_instance_timeout=0 - -# Automatically hard reboot an instance if it has been stuck -# in a rebooting state longer than N seconds. Set to 0 to -# disable. (integer value) -#reboot_timeout=0 - -# Amount of time in seconds an instance can be in BUILD before -# going into ERROR status. Set to 0 to disable. (integer -# value) -#instance_build_timeout=0 - -# Automatically unrescue an instance after N seconds. Set to 0 -# to disable. (integer value) -#rescue_timeout=0 - -# Automatically confirm resizes after N seconds. Set to 0 to -# disable. (integer value) -#resize_confirm_window=0 - -# Total amount of time to wait in seconds for an instance to -# perform a clean shutdown. (integer value) -#shutdown_timeout=60 - - -# -# Options defined in nova.compute.monitors -# - -# Monitor classes available to the compute which may be -# specified more than once. (multi valued) -#compute_available_monitors=nova.compute.monitors.all_monitors - -# A list of monitors that can be used for getting compute -# metrics. (list value) -#compute_monitors= - - -# -# Options defined in nova.compute.resource_tracker -# - -# Amount of disk in MB to reserve for the host (integer value) -#reserved_host_disk_mb=0 - -# Amount of memory in MB to reserve for the host (integer -# value) -reserved_host_memory_mb={{ RESERVED_HOST_MEMORY_MB }} - -# Class that will manage stats for the local compute host -# (string value) -#compute_stats_class=nova.compute.stats.Stats - -# The names of the extra resources to track. (list value) -#compute_resources=vcpu - - -# -# Options defined in nova.compute.rpcapi -# - -# The topic compute nodes listen on (string value) -#compute_topic=compute - - -# -# Options defined in nova.conductor.tasks.live_migrate -# - -# Number of times to retry live-migration before failing. If -# == -1, try until out of hosts. If == 0, only try once, no -# retries. (integer value) -#migrate_max_retries=-1 - - -# -# Options defined in nova.console.manager -# - -# Driver to use for the console proxy (string value) -#console_driver=nova.console.xvp.XVPConsoleProxy - -# Stub calls to compute worker for tests (boolean value) -#stub_compute=false - -# Publicly visible name for this console host (string value) -#console_public_hostname=nova - - -# -# Options defined in nova.console.rpcapi -# - -# The topic console proxy nodes listen on (string value) -#console_topic=console - - -# -# Options defined in nova.console.xvp -# - -# XVP conf template (string value) -#console_xvp_conf_template=$pybasedir/nova/console/xvp.conf.template - -# Generated XVP conf file (string value) -#console_xvp_conf=/etc/xvp.conf - -# XVP master process pid file (string value) -#console_xvp_pid=/var/run/xvp.pid - -# XVP log file (string value) -#console_xvp_log=/var/log/xvp.log - -# Port for XVP to multiplex VNC connections on (integer value) -#console_xvp_multiplex_port=5900 - - -# -# Options defined in nova.consoleauth -# - -# The topic console auth proxy nodes listen on (string value) -#consoleauth_topic=consoleauth - - -# -# Options defined in nova.consoleauth.manager -# - -# How many seconds before deleting tokens (integer value) -#console_token_ttl=600 - - -# -# Options defined in nova.db.api -# - -# Services to be added to the available pool on create -# (boolean value) -#enable_new_services=true - -# Template string to be used to generate instance names -# (string value) -instance_name_template=instance-%08x - -# Template string to be used to generate snapshot names -# (string value) -snapshot_name_template=snapshot-%s - - -# -# Options defined in nova.db.base -# - -# The driver to use for database access (string value) -#db_driver=nova.db - - -# -# Options defined in nova.db.sqlalchemy.api -# - -# When set, compute API will consider duplicate hostnames -# invalid within the specified scope, regardless of case. -# Should be empty, "project" or "global". (string value) -#osapi_compute_unique_server_name_scope= - - -# -# Options defined in nova.image.s3 -# - -# Parent directory for tempdir used for image decryption -# (string value) -#image_decryption_dir=/tmp - -# Hostname or IP for OpenStack to use when accessing the S3 -# api (string value) -#s3_host=$my_ip - -# Port used when accessing the S3 api (integer value) -#s3_port=3333 - -# Access key to use for S3 server for images (string value) -#s3_access_key=notchecked - -# Secret key to use for S3 server for images (string value) -#s3_secret_key=notchecked - -# Whether to use SSL when talking to S3 (boolean value) -#s3_use_ssl=false - -# Whether to affix the tenant id to the access key when -# downloading from S3 (boolean value) -#s3_affix_tenant=false - - -# -# Options defined in nova.ipv6.api -# - -# Backend to use for IPv6 generation (string value) -#ipv6_backend=rfc2462 - - -# -# Options defined in nova.network -# - -# The full class name of the network API class to use (string -# value) -network_api_class=nova.network.neutronv2.api.API - - -# -# Options defined in nova.network.driver -# - -# Driver to use for network creation (string value) -#network_driver=nova.network.linux_net - - -# -# Options defined in nova.network.floating_ips -# - -# Default pool for floating IPs (string value) -#default_floating_pool=nova - -# Autoassigning floating IP to VM (boolean value) -#auto_assign_floating_ip=false - -# Full class name for the DNS Manager for floating IPs (string -# value) -#floating_ip_dns_manager=nova.network.noop_dns_driver.NoopDNSDriver - -# Full class name for the DNS Manager for instance IPs (string -# value) -#instance_dns_manager=nova.network.noop_dns_driver.NoopDNSDriver - -# Full class name for the DNS Zone for instance IPs (string -# value) -#instance_dns_domain= - - -# -# Options defined in nova.network.ldapdns -# - -# URL for LDAP server which will store DNS entries (string -# value) -#ldap_dns_url=ldap://ldap.example.com:389 - -# User for LDAP DNS (string value) -#ldap_dns_user=uid=admin,ou=people,dc=example,dc=org - -# Password for LDAP DNS (string value) -#ldap_dns_password=password - -# Hostmaster for LDAP DNS driver Statement of Authority -# (string value) -#ldap_dns_soa_hostmaster=hostmaster@example.org - -# DNS Servers for LDAP DNS driver (multi valued) -#ldap_dns_servers=dns.example.org - -# Base DN for DNS entries in LDAP (string value) -#ldap_dns_base_dn=ou=hosts,dc=example,dc=org - -# Refresh interval (in seconds) for LDAP DNS driver Statement -# of Authority (string value) -#ldap_dns_soa_refresh=1800 - -# Retry interval (in seconds) for LDAP DNS driver Statement of -# Authority (string value) -#ldap_dns_soa_retry=3600 - -# Expiry interval (in seconds) for LDAP DNS driver Statement -# of Authority (string value) -#ldap_dns_soa_expiry=86400 - -# Minimum interval (in seconds) for LDAP DNS driver Statement -# of Authority (string value) -#ldap_dns_soa_minimum=7200 - - -# -# Options defined in nova.network.linux_net -# - -# Location of flagfiles for dhcpbridge (multi valued) -#dhcpbridge_flagfile=/etc/nova/nova-dhcpbridge.conf - -# Location to keep network config files (string value) -#networks_path=$state_path/networks - -# Interface for public IP addresses (string value) -#public_interface=eth0 - -# Location of nova-dhcpbridge (string value) -#dhcpbridge=$bindir/nova-dhcpbridge - -# Public IP of network host (string value) -#routing_source_ip=$my_ip - -# Lifetime of a DHCP lease in seconds (integer value) -#dhcp_lease_time=86400 - -# If set, uses specific DNS server for dnsmasq. Can be -# specified multiple times. (multi valued) -#dns_server= - -# If set, uses the dns1 and dns2 from the network ref. as dns -# servers. (boolean value) -#use_network_dns_servers=false - -# A list of dmz ranges that should be accepted (list value) -#dmz_cidr= - -# Traffic to this range will always be snatted to the fallback -# ip, even if it would normally be bridged out of the node. -# Can be specified multiple times. (multi valued) -#force_snat_range= - -# Override the default dnsmasq settings with this file (string -# value) -#dnsmasq_config_file= - -# Driver used to create ethernet devices. (string value) -linuxnet_interface_driver=nova.network.linux_net.LinuxOVSInterfaceDriver - -# Name of Open vSwitch bridge used with linuxnet (string -# value) -#linuxnet_ovs_integration_bridge=br-int - -# Send gratuitous ARPs for HA setup (boolean value) -#send_arp_for_ha=false - -# Send this many gratuitous ARPs for HA setup (integer value) -#send_arp_for_ha_count=3 - -# Use single default gateway. Only first nic of vm will get -# default gateway from dhcp server (boolean value) -#use_single_default_gateway=false - -# An interface that bridges can forward to. If this is set to -# all then all traffic will be forwarded. Can be specified -# multiple times. (multi valued) -#forward_bridge_interface=all - -# The IP address for the metadata API server (string value) -#metadata_host=$my_ip - -# The port for the metadata API port (integer value) -#metadata_port=8775 - -# Regular expression to match the iptables rule that should -# always be on the top. (string value) -#iptables_top_regex= - -# Regular expression to match the iptables rule that should -# always be on the bottom. (string value) -#iptables_bottom_regex= - -# The table that iptables to jump to when a packet is to be -# dropped. (string value) -#iptables_drop_action=DROP - -# Amount of time, in seconds, that ovs_vsctl should wait for a -# response from the database. 0 is to wait forever. (integer -# value) -#ovs_vsctl_timeout=120 - -# If passed, use fake network devices and addresses (boolean -# value) -#fake_network=false - -# Number of times to retry ebtables commands on failure. -# (integer value) -#ebtables_exec_attempts=3 - -# Number of seconds to wait between ebtables retries. -# (floating point value) -#ebtables_retry_interval=1.0 - - -# -# Options defined in nova.network.manager -# - -# Bridge for simple network instances (string value) -#flat_network_bridge=<None> - -# DNS server for simple network (string value) -#flat_network_dns=8.8.4.4 - -# Whether to attempt to inject network setup into guest -# (boolean value) -#flat_injected=false - -# FlatDhcp will bridge into this interface if set (string -# value) -#flat_interface=<None> - -# First VLAN for private networks (integer value) -#vlan_start=100 - -# VLANs will bridge into this interface if set (string value) -#vlan_interface=<None> - -# Number of networks to support (integer value) -#num_networks=1 - -# Public IP for the cloudpipe VPN servers (string value) -#vpn_ip=$my_ip - -# First Vpn port for private networks (integer value) -#vpn_start=1000 - -# Number of addresses in each private subnet (integer value) -#network_size=256 - -# Fixed IPv6 address block (string value) -#fixed_range_v6=fd00::/48 - -# Default IPv4 gateway (string value) -#gateway=<None> - -# Default IPv6 gateway (string value) -#gateway_v6=<None> - -# Number of addresses reserved for vpn clients (integer value) -#cnt_vpn_clients=0 - -# Seconds after which a deallocated IP is disassociated -# (integer value) -#fixed_ip_disassociate_timeout=600 - -# Number of attempts to create unique mac address (integer -# value) -#create_unique_mac_address_attempts=5 - -# If True, skip using the queue and make local calls (boolean -# value) -#fake_call=false - -# If True, unused gateway devices (VLAN and bridge) are -# deleted in VLAN network mode with multi hosted networks -# (boolean value) -#teardown_unused_network_gateway=false - -# If True, send a dhcp release on instance termination -# (boolean value) -#force_dhcp_release=true - -# If True, when a DNS entry must be updated, it sends a fanout -# cast to all network hosts to update their DNS entries in -# multi host mode (boolean value) -#update_dns_entries=false - -# Number of seconds to wait between runs of updates to DNS -# entries. (integer value) -#dns_update_periodic_interval=-1 - -# Domain to use for building the hostnames (string value) -#dhcp_domain=novalocal - -# Indicates underlying L3 management library (string value) -#l3_lib=nova.network.l3.LinuxNetL3 - - -# -# Options defined in nova.network.rpcapi -# - -# The topic network nodes listen on (string value) -#network_topic=network - -# Default value for multi_host in networks. Also, if set, some -# rpc network calls will be sent directly to host. (boolean -# value) -#multi_host=false - - -# -# Options defined in nova.network.security_group.openstack_driver -# - -# The full class name of the security API class (string value) -security_group_api=neutron - - -# -# Options defined in nova.objects.network -# - -# DEPRECATED: THIS VALUE SHOULD BE SET WHEN CREATING THE -# NETWORK. If True in multi_host mode, all compute hosts share -# the same dhcp address. The same IP address used for DHCP -# will be added on each nova-network node which is only -# visible to the vms on the same host. (boolean value) -#share_dhcp_address=false - -# DEPRECATED: THIS VALUE SHOULD BE SET WHEN CREATING THE -# NETWORK. MTU setting for network interface. (integer value) -#network_device_mtu=<None> - - -# -# Options defined in nova.objectstore.s3server -# - -# Path to S3 buckets (string value) -#buckets_path=$state_path/buckets - -# IP address for S3 API to listen (string value) -#s3_listen=0.0.0.0 - -# Port for S3 API to listen (integer value) -#s3_listen_port=3333 - - -# -# From oslo.log -# - -# Print debugging output (set logging level to DEBUG instead of default WARNING -# level). (boolean value) -#debug = false - -# Print more verbose output (set logging level to INFO instead of default -# WARNING level). (boolean value) -#verbose = false - -# The name of a logging configuration file. This file is appended to any -# existing logging configuration files. For details about logging configuration -# files, see the Python logging module documentation. (string value) -# Deprecated group/name - [DEFAULT]/log_config -#log_config_append = <None> - -# DEPRECATED. A logging.Formatter log message format string which may use any -# of the available logging.LogRecord attributes. This option is deprecated. -# Please use logging_context_format_string and logging_default_format_string -# instead. (string value) -#log_format = <None> - -# Format string for %%(asctime)s in log records. Default: %(default)s . (string -# value) -#log_date_format = %Y-%m-%d %H:%M:%S - -# (Optional) Name of log file to output to. If no default is set, logging will -# go to stdout. (string value) -# Deprecated group/name - [DEFAULT]/logfile -#log_file = <None> - -# (Optional) The base directory used for relative --log-file paths. (string -# value) -# Deprecated group/name - [DEFAULT]/logdir -#log_dir = <None> - -# Use syslog for logging. Existing syslog format is DEPRECATED during I, and -# will change in J to honor RFC5424. (boolean value) -use_syslog = True - -# (Optional) Enables or disables syslog rfc5424 format for logging. If enabled, -# prefixes the MSG part of the syslog message with APP-NAME (RFC5424). The -# format without the APP-NAME is deprecated in I, and will be removed in J. -# (boolean value) -#use_syslog_rfc_format = false - -# Syslog facility to receive log lines. (string value) -#syslog_log_facility = LOG_USER - -# Log output to standard error. (boolean value) -#use_stderr = true - -# Format string to use for log messages with context. (string value) -#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s - -# Format string to use for log messages without context. (string value) -#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s - -# Data to append to log format when level is DEBUG. (string value) -#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d - -# Prefix each line of exception output with this format. (string value) -#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d TRACE %(name)s %(instance)s - -# List of logger=LEVEL pairs. (list value) -#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN - -# Enables or disables publication of error events. (boolean value) -#publish_errors = false - -# Enables or disables fatal status of deprecations. (boolean value) -#fatal_deprecations = false - -# The format for an instance that is passed with the log message. (string -# value) -#instance_format = "[instance: %(uuid)s] " - -# The format for an instance UUID that is passed with the log message. (string -# value) -#instance_uuid_format = "[instance: %(uuid)s] " - - -# -# Options defined in nova.pci.request -# - -# An alias for a PCI passthrough device requirement. This -# allows users to specify the alias in the extra_spec for a -# flavor, without needing to repeat all the PCI property -# requirements. For example: pci_alias = { "name": -# "QuicAssist", "product_id": "0443", "vendor_id": "8086", -# "device_type": "ACCEL" } defines an alias for the Intel -# QuickAssist card. (multi valued) (multi valued) -#pci_alias= - - -# -# Options defined in nova.pci.whitelist -# - -# White list of PCI devices available to VMs. For example: -# pci_passthrough_whitelist = [{"vendor_id": "8086", -# "product_id": "0443"}] (multi valued) -#pci_passthrough_whitelist= - - -# -# Options defined in nova.scheduler.driver -# - -# The scheduler host manager class to use (string value) -scheduler_host_manager={{ SCHEDULER_HOST_MANAGER }} - - -# -# Options defined in nova.scheduler.filter_scheduler -# - -# New instances will be scheduled on a host chosen randomly -# from a subset of the N best hosts. This property defines the -# subset size that a host is chosen from. A value of 1 chooses -# the first host returned by the weighing functions. This -# value must be at least 1. Any value less than 1 will be -# ignored, and 1 will be used instead (integer value) -#scheduler_host_subset_size=1 - - -# -# Options defined in nova.scheduler.filters.aggregate_image_properties_isolation -# - -# Force the filter to consider only keys matching the given -# namespace. (string value) -#aggregate_image_properties_isolation_namespace=<None> - -# The separator used between the namespace and keys (string -# value) -#aggregate_image_properties_isolation_separator=. - - -# -# Options defined in nova.scheduler.filters.core_filter -# - -# Virtual CPU to physical CPU allocation ratio which affects -# all CPU filters. This configuration specifies a global ratio -# for CoreFilter. For AggregateCoreFilter, it will fall back -# to this configuration value if no per-aggregate setting -# found. (floating point value) -#cpu_allocation_ratio=16.0 - - -# -# Options defined in nova.scheduler.filters.disk_filter -# - -# Virtual disk to physical disk allocation ratio (floating -# point value) -#disk_allocation_ratio=1.0 - - -# -# Options defined in nova.scheduler.filters.io_ops_filter -# - -# Tells filters to ignore hosts that have this many or more -# instances currently in build, resize, snapshot, migrate, -# rescue or unshelve task states (integer value) -#max_io_ops_per_host=8 - - -# -# Options defined in nova.scheduler.filters.isolated_hosts_filter -# - -# Images to run on isolated host (list value) -#isolated_images= - -# Host reserved for specific images (list value) -#isolated_hosts= - -# Whether to force isolated hosts to run only isolated images -# (boolean value) -#restrict_isolated_hosts_to_isolated_images=true - - -# -# Options defined in nova.scheduler.filters.num_instances_filter -# - -# Ignore hosts that have too many instances (integer value) -#max_instances_per_host=50 - - -# -# Options defined in nova.scheduler.filters.ram_filter -# - -# Virtual ram to physical ram allocation ratio which affects -# all ram filters. This configuration specifies a global ratio -# for RamFilter. For AggregateRamFilter, it will fall back to -# this configuration value if no per-aggregate setting found. -# (floating point value) -ram_allocation_ratio={{ RAM_ALLOCATION_RATIO }} - - -# -# Options defined in nova.scheduler.host_manager -# - -# Filter classes available to the scheduler which may be -# specified more than once. An entry of -# "nova.scheduler.filters.all_filters" maps to all filters -# included with nova. (multi valued) -#scheduler_available_filters=nova.scheduler.filters.all_filters - -# Which filter class names to use for filtering hosts when not -# specified in the request. (list value) -scheduler_default_filters=RetryFilter,AvailabilityZoneFilter,RamFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter - -# Which weight class names to use for weighing hosts (list -# value) -#scheduler_weight_classes=nova.scheduler.weights.all_weighers - -# Determines if the Scheduler tracks changes to instances to -# help with its filtering decisions. (boolean value) -#scheduler_tracks_instance_changes=true - - -# -# Options defined in nova.scheduler.ironic_host_manager -# - -# Which filter class names to use for filtering baremetal -# hosts when not specified in the request. (list value) -#baremetal_scheduler_default_filters=RetryFilter,AvailabilityZoneFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ExactRamFilter,ExactDiskFilter,ExactCoreFilter - -# Flag to decide whether to use -# baremetal_scheduler_default_filters or not. (boolean value) -scheduler_use_baremetal_filters={{ SCHEDULER_USE_BAREMETAL_FILTERS }} - - -# -# Options defined in nova.scheduler.manager -# - -# Default driver to use for the scheduler (string value) -scheduler_driver=nova.scheduler.filter_scheduler.FilterScheduler - -# How often (in seconds) to run periodic tasks in the -# scheduler driver of your choice. Please note this is likely -# to interact with the value of service_down_time, but exactly -# how they interact will depend on your choice of scheduler -# driver. (integer value) -#scheduler_driver_task_period=60 - - -# -# Options defined in nova.scheduler.rpcapi -# - -# The topic scheduler nodes listen on (string value) -#scheduler_topic=scheduler - - -# -# Options defined in nova.scheduler.scheduler_options -# - -# Absolute path to scheduler configuration JSON file. (string -# value) -#scheduler_json_config_location= - - -# -# Options defined in nova.scheduler.utils -# - -# Maximum number of attempts to schedule an instance (integer -# value) -#scheduler_max_attempts=3 - - -# -# Options defined in nova.scheduler.weights.io_ops -# - -# Multiplier used for weighing host io ops. Negative numbers -# mean a preference to choose light workload compute hosts. -# (floating point value) -#io_ops_weight_multiplier=-1.0 - - -# -# Options defined in nova.scheduler.weights.ram -# - -# Multiplier used for weighing ram. Negative numbers mean to -# stack vs spread. (floating point value) -#ram_weight_multiplier=1.0 - - -# -# Options defined in nova.servicegroup.api -# - -# The driver for servicegroup service (valid options are: db, -# zk, mc) (string value) -#servicegroup_driver=db - - -# -# Options defined in nova.virt.configdrive -# - -# Config drive format. One of iso9660 (default) or vfat -# (string value) -#config_drive_format=iso9660 - -# Set to "always" to force injection to take place on a config -# drive. NOTE: The "always" will be deprecated in the Liberty -# release cycle. (string value) -#force_config_drive=<None> - -# Name and optionally path of the tool used for ISO image -# creation (string value) -#mkisofs_cmd=genisoimage - - -# -# Options defined in nova.virt.disk.api -# - -# Name of the mkfs commands for ephemeral device. The format -# is <os_type>=<mkfs command> (multi valued) -#virt_mkfs= - -# Attempt to resize the filesystem by accessing the image over -# a block device. This is done by the host and may not be -# necessary if the image contains a recent version of cloud- -# init. Possible mechanisms require the nbd driver (for qcow -# and raw), or loop (for raw). (boolean value) -#resize_fs_using_block_device=false - - -# -# Options defined in nova.virt.disk.mount.nbd -# - -# Amount of time, in seconds, to wait for NBD device start up. -# (integer value) -#timeout_nbd=10 - - -# -# Options defined in nova.virt.driver -# - -# Driver to use for controlling virtualization. Options -# include: libvirt.LibvirtDriver, xenapi.XenAPIDriver, -# fake.FakeDriver, baremetal.BareMetalDriver, -# vmwareapi.VMwareVCDriver, hyperv.HyperVDriver (string value) -compute_driver={{ COMPUTE_DRIVER }} - -# The default format an ephemeral_volume will be formatted -# with on creation. (string value) -#default_ephemeral_format=<None> - -# VM image preallocation mode: "none" => no storage -# provisioning is done up front, "space" => storage is fully -# allocated at instance start (string value) -#preallocate_images=none - -# Whether to use cow images (boolean value) -#use_cow_images=true - -# Fail instance boot if vif plugging fails (boolean value) -#vif_plugging_is_fatal=true - -# Number of seconds to wait for neutron vif plugging events to -# arrive before continuing or failing (see -# vif_plugging_is_fatal). If this is set to zero and -# vif_plugging_is_fatal is False, events should not be -# expected to arrive at all. (integer value) -#vif_plugging_timeout=300 - - -# -# Options defined in nova.virt.firewall -# - -# Firewall driver (defaults to hypervisor specific iptables -# driver) (string value) -firewall_driver=nova.virt.firewall.NoopFirewallDriver - -# Whether to allow network traffic from same network (boolean -# value) -#allow_same_net_traffic=true - - -# -# Options defined in nova.virt.hardware -# - -# Defines which pcpus that instance vcpus can use. For -# example, "4-12,^8,15" (string value) -#vcpu_pin_set=<None> - - -# -# Options defined in nova.virt.imagecache -# - -# Number of seconds to wait between runs of the image cache -# manager. Set to -1 to disable. Setting this to 0 will run at -# the default rate. (integer value) -#image_cache_manager_interval=2400 - -# Where cached images are stored under $instances_path. This -# is NOT the full path - just a folder name. For per-compute- -# host cached images, set to _base_$my_ip (string value) -#image_cache_subdirectory_name=_base - -# Should unused base images be removed? (boolean value) -#remove_unused_base_images=true - -# Unused unresized base images younger than this will not be -# removed (integer value) -#remove_unused_original_minimum_age_seconds=86400 - - -# -# Options defined in nova.virt.images -# - -# Force backing images to raw format (boolean value) -#force_raw_images=true - - -# -# Options defined in nova.virt.netutils -# - -# Template file for injected network (string value) -#injected_network_template=$pybasedir/nova/virt/interfaces.template - - -# -# Options defined in nova.vnc -# - -# Location of VNC console proxy, in the form -# "http://127.0.0.1:6080/vnc_auto.html" (string value) -novncproxy_base_url=http://{{ MANAGEMENT_INTERFACE_IP_ADDRESS }}:6080/vnc_auto.html - -# Location of nova xvp VNC console proxy, in the form -# "http://127.0.0.1:6081/console" (string value) -#xvpvncproxy_base_url=http://127.0.0.1:6081/console - -# IP address on which instance vncservers should listen -# (string value) -vncserver_listen=0.0.0.0 - -# The address to which proxy clients (like nova-xvpvncproxy) -# should connect (string value) -vncserver_proxyclient_address={{ MANAGEMENT_INTERFACE_IP_ADDRESS }} - -# Enable VNC related features (boolean value) -vnc_enabled=true - -# Keymap for VNC (string value) -vnc_keymap=en-us - - -# -# Options defined in nova.vnc.xvp_proxy -# - -# Port that the XCP VNC proxy should bind to (integer value) -#xvpvncproxy_port=6081 - -# Address that the XCP VNC proxy should bind to (string value) -#xvpvncproxy_host=0.0.0.0 - - -# -# Options defined in nova.volume -# - -# The full class name of the volume API class to use (string -# value) -#volume_api_class=nova.volume.cinder.API - - -# -# Options defined in nova.openstack.common.eventlet_backdoor -# - -# Enable eventlet backdoor. Acceptable values are 0, <port>, -# and <start>:<end>, where 0 results in listening on a random -# tcp port number; <port> results in listening on the -# specified port number (and not enabling backdoor if that -# port is in use); and <start>:<end> results in listening on -# the smallest unused port number within the specified range -# of port numbers. The chosen port is displayed in the -# service's log file. (string value) -#backdoor_port=<None> - - -# -# Options defined in nova.openstack.common.memorycache -# - -# Memcached servers or None for in process cache. (list value) -#memcached_servers=<None> - - -# -# Options defined in nova.openstack.common.periodic_task -# - -# Some periodic tasks can be run in a separate process. Should -# we run them here? (boolean value) -#run_external_periodic_tasks=true - - -# -# Options defined in nova.openstack.common.policy -# - -# The JSON file that defines policies. (string value) -#policy_file=policy.json - -# Default rule. Enforced when a requested rule is not found. -# (string value) -#policy_default_rule=default - -# Directories where policy configuration files are stored. -# They can be relative to any directory in the search path -# defined by the config_dir option, or absolute paths. The -# file defined by policy_file must exist for these directories -# to be searched. Missing or empty directories are ignored. -# (multi valued) -#policy_dirs=policy.d - - -# -# Options defined in nova.openstack.common.versionutils -# - -# Enables or disables fatal status of deprecations. (boolean -# value) -#fatal_deprecations=false - - -[api_database] - -# -# Options defined in nova.db.sqlalchemy.api -# - -# The SQLAlchemy connection string to use to connect to the -# Nova API database. (string value) -#connection=postgresql://{{ NOVA_DB_USER }}:{{ NOVA_DB_PASSWORD }}@{{ CONTROLLER_HOST_ADDRESS }}/nova - -# If True, SQLite uses synchronous mode. (boolean value) -#sqlite_synchronous=true - -# Timeout before idle SQL connections are reaped. (integer -# value) -#idle_timeout=3600 - -# Maximum number of SQL connections to keep open in a pool. -# (integer value) -#max_pool_size=<None> - -# Maximum number of database connection retries during -# startup. Set to -1 to specify an infinite retry count. -# (integer value) -#max_retries=10 - -# Interval between retries of opening a SQL connection. -# (integer value) -#retry_interval=10 - -# If set, use this value for max_overflow with SQLAlchemy. -# (integer value) -#max_overflow=<None> - -# Verbosity of SQL debugging information: 0=None, -# 100=Everything. (integer value) -#connection_debug=0 - -# Add Python stack traces to SQL as comment strings. (boolean -# value) -#connection_trace=false - -# If set, use this value for pool_timeout with SQLAlchemy. -# (integer value) -#pool_timeout=<None> - - -[barbican] - -# -# Options defined in nova.keymgr.barbican -# - -# Info to match when looking for barbican in the service -# catalog. Format is: separated values of the form: -# <service_type>:<service_name>:<endpoint_type> (string value) -#catalog_info=key-manager:barbican:public - -# Override service catalog lookup with template for barbican -# endpoint e.g. http://localhost:9311/v1/%(project_id)s -# (string value) -#endpoint_template=<None> - -# Region name of this node (string value) -#os_region_name=<None> - - -# -# Options defined in nova.volume.cinder -# - -# Region name of this node (string value) -#os_region_name=<None> - - -[cells] - -# -# Options defined in nova.cells.manager -# - -# Cells communication driver to use (string value) -#driver=nova.cells.rpc_driver.CellsRPCDriver - -# Number of seconds after an instance was updated or deleted -# to continue to update cells (integer value) -#instance_updated_at_threshold=3600 - -# Number of instances to update per periodic task run (integer -# value) -#instance_update_num_instances=1 - - -# -# Options defined in nova.cells.messaging -# - -# Maximum number of hops for cells routing. (integer value) -#max_hop_count=10 - -# Cells scheduler to use (string value) -#scheduler=nova.cells.scheduler.CellsScheduler - - -# -# Options defined in nova.cells.opts -# - -# Enable cell functionality (boolean value) -#enable=false - -# The topic cells nodes listen on (string value) -#topic=cells - -# Manager for cells (string value) -#manager=nova.cells.manager.CellsManager - -# Name of this cell (string value) -#name=nova - -# Key/Multi-value list with the capabilities of the cell (list -# value) -#capabilities=hypervisor=xenserver;kvm,os=linux;windows - -# Seconds to wait for response from a call to a cell. (integer -# value) -#call_timeout=60 - -# Percentage of cell capacity to hold in reserve. Affects both -# memory and disk utilization (floating point value) -#reserve_percent=10.0 - -# Type of cell: api or compute (string value) -#cell_type=compute - -# Number of seconds after which a lack of capability and -# capacity updates signals the child cell is to be treated as -# a mute. (integer value) -#mute_child_interval=300 - -# Seconds between bandwidth updates for cells. (integer value) -#bandwidth_update_interval=600 - - -# -# Options defined in nova.cells.rpc_driver -# - -# Base queue name to use when communicating between cells. -# Various topics by message type will be appended to this. -# (string value) -#rpc_driver_queue_base=cells.intercell - - -# -# Options defined in nova.cells.scheduler -# - -# Filter classes the cells scheduler should use. An entry of -# "nova.cells.filters.all_filters" maps to all cells filters -# included with nova. (list value) -#scheduler_filter_classes=nova.cells.filters.all_filters - -# Weigher classes the cells scheduler should use. An entry of -# "nova.cells.weights.all_weighers" maps to all cell weighers -# included with nova. (list value) -#scheduler_weight_classes=nova.cells.weights.all_weighers - -# How many retries when no cells are available. (integer -# value) -#scheduler_retries=10 - -# How often to retry in seconds when no cells are available. -# (integer value) -#scheduler_retry_delay=2 - - -# -# Options defined in nova.cells.state -# - -# Interval, in seconds, for getting fresh cell information -# from the database. (integer value) -#db_check_interval=60 - -# Configuration file from which to read cells configuration. -# If given, overrides reading cells from the database. (string -# value) -#cells_config=<None> - - -# -# Options defined in nova.cells.weights.mute_child -# - -# Multiplier used to weigh mute children. (The value should be -# negative.) (floating point value) -#mute_weight_multiplier=-10.0 - -# Weight value assigned to mute children. (The value should be -# positive.) (floating point value) -#mute_weight_value=1000.0 - - -# -# Options defined in nova.cells.weights.ram_by_instance_type -# - -# Multiplier used for weighing ram. Negative numbers mean to -# stack vs spread. (floating point value) -#ram_weight_multiplier=10.0 - - -# -# Options defined in nova.cells.weights.weight_offset -# - -# Multiplier used to weigh offset weigher. (floating point -# value) -#offset_weight_multiplier=1.0 - - -[cinder] - -# -# Options defined in nova.volume.cinder -# - -# Info to match when looking for cinder in the service -# catalog. Format is: separated values of the form: -# <service_type>:<service_name>:<endpoint_type> (string value) -#catalog_info=volumev2:cinderv2:publicURL - -# Override service catalog lookup with template for cinder -# endpoint e.g. http://localhost:8776/v1/%(project_id)s -# (string value) -#endpoint_template=<None> - -# Number of cinderclient retries on failed http calls (integer -# value) -#http_retries=3 - -# Allow attach between instance and volume in different -# availability zones. (boolean value) -#cross_az_attach=true - - -[conductor] - -# -# Options defined in nova.conductor.api -# - -# Perform nova-conductor operations locally (boolean value) -use_local=true - -# The topic on which conductor nodes listen (string value) -#topic=conductor - -# Full class name for the Manager for conductor (string value) -#manager=nova.conductor.manager.ConductorManager - -# Number of workers for OpenStack Conductor service. The -# default will be the number of CPUs available. (integer -# value) -#workers=<None> - - -[database] - -# -# From oslo.db -# - -# The file name to use with SQLite. (string value) -# Deprecated group/name - [DEFAULT]/sqlite_db -#sqlite_db = oslo.sqlite - -# If True, SQLite uses synchronous mode. (boolean value) -# Deprecated group/name - [DEFAULT]/sqlite_synchronous -#sqlite_synchronous = true - -# The back end to use for the database. (string value) -# Deprecated group/name - [DEFAULT]/db_backend -#backend = sqlalchemy - -# The SQLAlchemy connection string to use to connect to the database. (string -# value) -# Deprecated group/name - [DEFAULT]/sql_connection -# Deprecated group/name - [DATABASE]/sql_connection -# Deprecated group/name - [sql]/connection -#connection = <None> -connection=postgresql://{{ NOVA_DB_USER }}:{{ NOVA_DB_PASSWORD }}@{{ CONTROLLER_HOST_ADDRESS }}/nova - -# The SQLAlchemy connection string to use to connect to the slave database. -# (string value) -#slave_connection = <None> - -# The SQL mode to be used for MySQL sessions. This option, including the -# default, overrides any server-set SQL mode. To use whatever SQL mode is set -# by the server configuration, set this to no value. Example: mysql_sql_mode= -# (string value) -#mysql_sql_mode = TRADITIONAL - -# Timeout before idle SQL connections are reaped. (integer value) -# Deprecated group/name - [DEFAULT]/sql_idle_timeout -# Deprecated group/name - [DATABASE]/sql_idle_timeout -# Deprecated group/name - [sql]/idle_timeout -#idle_timeout = 3600 - -# Minimum number of SQL connections to keep open in a pool. (integer value) -# Deprecated group/name - [DEFAULT]/sql_min_pool_size -# Deprecated group/name - [DATABASE]/sql_min_pool_size -#min_pool_size = 1 - -# Maximum number of SQL connections to keep open in a pool. (integer value) -# Deprecated group/name - [DEFAULT]/sql_max_pool_size -# Deprecated group/name - [DATABASE]/sql_max_pool_size -#max_pool_size = <None> - -# Maximum number of database connection retries during startup. Set to -1 to -# specify an infinite retry count. (integer value) -# Deprecated group/name - [DEFAULT]/sql_max_retries -# Deprecated group/name - [DATABASE]/sql_max_retries -#max_retries = 10 - -# Interval between retries of opening a SQL connection. (integer value) -# Deprecated group/name - [DEFAULT]/sql_retry_interval -# Deprecated group/name - [DATABASE]/reconnect_interval -#retry_interval = 10 - -# If set, use this value for max_overflow with SQLAlchemy. (integer value) -# Deprecated group/name - [DEFAULT]/sql_max_overflow -# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow -#max_overflow = <None> - -# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer -# value) -# Deprecated group/name - [DEFAULT]/sql_connection_debug -#connection_debug = 0 - -# Add Python stack traces to SQL as comment strings. (boolean value) -# Deprecated group/name - [DEFAULT]/sql_connection_trace -#connection_trace = false - -# If set, use this value for pool_timeout with SQLAlchemy. (integer value) -# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout -#pool_timeout = <None> - -# Enable the experimental use of database reconnect on connection lost. -# (boolean value) -#use_db_reconnect = false - -# Seconds between retries of a database transaction. (integer value) -#db_retry_interval = 1 - -# If True, increases the interval between retries of a database operation up to -# db_max_retry_interval. (boolean value) -#db_inc_retry_interval = true - -# If db_inc_retry_interval is set, the maximum seconds between retries of a -# database operation. (integer value) -#db_max_retry_interval = 10 - -# Maximum retries in case of connection error or deadlock error before error is -# raised. Set to -1 to specify an infinite retry count. (integer value) -#db_max_retries = 20 - - -# -# Options defined in nova.db.sqlalchemy.api -# - -# The SQLAlchemy connection string to use to connect to the -# slave database. (string value) -#slave_connection=<None> - -# The SQL mode to be used for MySQL sessions. This option, -# including the default, overrides any server-set SQL mode. To -# use whatever SQL mode is set by the server configuration, -# set this to no value. Example: mysql_sql_mode= (string -# value) -#mysql_sql_mode=TRADITIONAL - - -[ephemeral_storage_encryption] - -# -# Options defined in nova.compute.api -# - -# Whether to encrypt ephemeral storage (boolean value) -#enabled=false - -# The cipher and mode to be used to encrypt ephemeral storage. -# Which ciphers are available ciphers depends on kernel -# support. See /proc/crypto for the list of available options. -# (string value) -#cipher=aes-xts-plain64 - -# The bit length of the encryption key to be used to encrypt -# ephemeral storage (in XTS mode only half of the bits are -# used for encryption key) (integer value) -#key_size=512 - - -[glance] - -# -# Options defined in nova.image.glance -# - -# Default glance hostname or IP address (string value) -host={{ CONTROLLER_HOST_ADDRESS }} - -# Default glance port (integer value) -port=9292 - -# Default protocol to use when connecting to glance. Set to -# https for SSL. (string value) -protocol=http - -# A list of the glance api servers available to nova. Prefix -# with https:// for ssl-based glance api servers. -# ([hostname|ip]:port) (list value) -api_servers=$host:$port - -# Allow to perform insecure SSL (https) requests to glance -# (boolean value) -#api_insecure=false - -# Number of retries when uploading / downloading an image to / -# from glance. (integer value) -#num_retries=0 - -# A list of url scheme that can be downloaded directly via the -# direct_url. Currently supported schemes: [file]. (list -# value) -#allowed_direct_url_schemes= - - -[guestfs] - -# -# Options defined in nova.virt.disk.vfs.guestfs -# - -# Enable guestfs debug (boolean value) -#debug=false - - -[hyperv] - -# -# Options defined in nova.virt.hyperv.pathutils -# - -# The name of a Windows share name mapped to the -# "instances_path" dir and used by the resize feature to copy -# files to the target host. If left blank, an administrative -# share will be used, looking for the same "instances_path" -# used locally (string value) -#instances_path_share= - - -# -# Options defined in nova.virt.hyperv.utilsfactory -# - -# Force V1 WMI utility classes (boolean value) -#force_hyperv_utils_v1=false - -# Force V1 volume utility class (boolean value) -#force_volumeutils_v1=false - - -# -# Options defined in nova.virt.hyperv.vif -# - -# External virtual switch Name, if not provided, the first -# external virtual switch is used (string value) -#vswitch_name=<None> - - -# -# Options defined in nova.virt.hyperv.vmops -# - -# Required for live migration among hosts with different CPU -# features (boolean value) -#limit_cpu_features=false - -# Sets the admin password in the config drive image (boolean -# value) -#config_drive_inject_password=false - -# Path of qemu-img command which is used to convert between -# different image types (string value) -#qemu_img_cmd=qemu-img.exe - -# Attaches the Config Drive image as a cdrom drive instead of -# a disk drive (boolean value) -#config_drive_cdrom=false - -# Enables metrics collections for an instance by using -# Hyper-V's metric APIs. Collected data can by retrieved by -# other apps and services, e.g.: Ceilometer. Requires Hyper-V -# / Windows Server 2012 and above (boolean value) -#enable_instance_metrics_collection=false - -# Enables dynamic memory allocation (ballooning) when set to a -# value greater than 1. The value expresses the ratio between -# the total RAM assigned to an instance and its startup RAM -# amount. For example a ratio of 2.0 for an instance with -# 1024MB of RAM implies 512MB of RAM allocated at startup -# (floating point value) -#dynamic_memory_ratio=1.0 - -# Number of seconds to wait for instance to shut down after -# soft reboot request is made. We fall back to hard reboot if -# instance does not shutdown within this window. (integer -# value) -#wait_soft_reboot_seconds=60 - - -# -# Options defined in nova.virt.hyperv.volumeops -# - -# The number of times to retry to attach a volume (integer -# value) -#volume_attach_retry_count=10 - -# Interval between volume attachment attempts, in seconds -# (integer value) -#volume_attach_retry_interval=5 - -# The number of times to retry checking for a disk mounted via -# iSCSI. (integer value) -#mounted_disk_query_retry_count=10 - -# Interval between checks for a mounted iSCSI disk, in -# seconds. (integer value) -#mounted_disk_query_retry_interval=5 - - -[image_file_url] - -# -# Options defined in nova.image.download.file -# - -# List of file systems that are configured in this file in the -# image_file_url:<list entry name> sections (list value) -#filesystems= - - -[ironic] - -# -# Options defined in nova.virt.ironic.driver -# - -# Version of Ironic API service endpoint. (integer value) -#api_version=1 - -# URL for Ironic API endpoint. (string value) -api_endpoint=http://{{ CONTROLLER_HOST_ADDRESS }}:6385/v1 - -# Ironic keystone admin name (string value) -admin_username={{ IRONIC_SERVICE_USER }} - -# Ironic keystone admin password. (string value) -admin_password={{ IRONIC_SERVICE_PASSWORD }} - -# Ironic keystone auth token. (string value) -#admin_auth_token=<None> - -# Keystone public API endpoint. (string value) -admin_url=http://{{ CONTROLLER_HOST_ADDRESS }}:35357/v2.0 - -# Log level override for ironicclient. Set this in order to -# override the global "default_log_levels", "verbose", and -# "debug" settings. DEPRECATED: use standard logging -# configuration. (string value) -#client_log_level=<None> - -# Ironic keystone tenant name. (string value) -admin_tenant_name=service - -# How many retries when a request does conflict. (integer -# value) -#api_max_retries=60 - -# How often to retry in seconds when a request does conflict -# (integer value) -#api_retry_interval=2 - - -[keymgr] - -# -# Options defined in nova.keymgr -# - -# The full class name of the key manager API class (string -# value) -#api_class=nova.keymgr.conf_key_mgr.ConfKeyManager - - -# -# Options defined in nova.keymgr.conf_key_mgr -# - -# Fixed key returned by key manager, specified in hex (string -# value) -#fixed_key=<None> - - -[keystone_authtoken] - -# -# From keystonemiddleware.auth_token -# - -# Complete public Identity API endpoint. (string value) -auth_uri = http://{{ CONTROLLER_HOST_ADDRESS }}:5000/v2.0 - -# API version of the admin Identity API endpoint. (string value) -auth_version = v2.0 - -# Do not handle authorization requests within the middleware, but delegate the -# authorization decision to downstream WSGI components. (boolean value) -#delay_auth_decision = false - -# Request timeout value for communicating with Identity API server. (integer -# value) -#http_connect_timeout = <None> - -# How many times are we trying to reconnect when communicating with Identity -# API Server. (integer value) -#http_request_max_retries = 3 - -# Env key for the swift cache. (string value) -#cache = <None> - -# Required if identity server requires client certificate (string value) -#certfile = <None> - -# Required if identity server requires client certificate (string value) -#keyfile = <None> - -# A PEM encoded Certificate Authority to use when verifying HTTPs connections. -# Defaults to system CAs. (string value) -#cafile = <None> - -# Verify HTTPS connections. (boolean value) -#insecure = false - -# Directory used to cache files related to PKI tokens. (string value) -#signing_dir = <None> - -# Optionally specify a list of memcached server(s) to use for caching. If left -# undefined, tokens will instead be cached in-process. (list value) -# Deprecated group/name - [DEFAULT]/memcache_servers -#memcached_servers = <None> - -# In order to prevent excessive effort spent validating tokens, the middleware -# caches previously-seen tokens for a configurable duration (in seconds). Set -# to -1 to disable caching completely. (integer value) -#token_cache_time = 300 - -# Determines the frequency at which the list of revoked tokens is retrieved -# from the Identity service (in seconds). A high number of revocation events -# combined with a low cache duration may significantly reduce performance. -# (integer value) -#revocation_cache_time = 10 - -# (Optional) If defined, indicate whether token data should be authenticated or -# authenticated and encrypted. Acceptable values are MAC or ENCRYPT. If MAC, -# token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data -# is encrypted and authenticated in the cache. If the value is not one of these -# options or empty, auth_token will raise an exception on initialization. -# (string value) -#memcache_security_strategy = <None> - -# (Optional, mandatory if memcache_security_strategy is defined) This string is -# used for key derivation. (string value) -#memcache_secret_key = <None> - -# (Optional) Number of seconds memcached server is considered dead before it is -# tried again. (integer value) -#memcache_pool_dead_retry = 300 - -# (Optional) Maximum total number of open connections to every memcached -# server. (integer value) -#memcache_pool_maxsize = 10 - -# (Optional) Socket timeout in seconds for communicating with a memcache -# server. (integer value) -#memcache_pool_socket_timeout = 3 - -# (Optional) Number of seconds a connection to memcached is held unused in the -# pool before it is closed. (integer value) -#memcache_pool_unused_timeout = 60 - -# (Optional) Number of seconds that an operation will wait to get a memcache -# client connection from the pool. (integer value) -#memcache_pool_conn_get_timeout = 10 - -# (Optional) Use the advanced (eventlet safe) memcache client pool. The -# advanced pool will only work under python 2.x. (boolean value) -#memcache_use_advanced_pool = false - -# (Optional) Indicate whether to set the X-Service-Catalog header. If False, -# middleware will not ask for service catalog on token validation and will not -# set the X-Service-Catalog header. (boolean value) -#include_service_catalog = true - -# Used to control the use and type of token binding. Can be set to: "disabled" -# to not check token binding. "permissive" (default) to validate binding -# information if the bind type is of a form known to the server and ignore it -# if not. "strict" like "permissive" but if the bind type is unknown the token -# will be rejected. "required" any form of token binding is needed to be -# allowed. Finally the name of a binding method that must be present in tokens. -# (string value) -#enforce_token_bind = permissive - -# If true, the revocation list will be checked for cached tokens. This requires -# that PKI tokens are configured on the identity server. (boolean value) -#check_revocations_for_cached = false - -# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm -# or multiple. The algorithms are those supported by Python standard -# hashlib.new(). The hashes will be tried in the order given, so put the -# preferred one first for performance. The result of the first hash will be -# stored in the cache. This will typically be set to multiple values only while -# migrating from a less secure algorithm to a more secure one. Once all the old -# tokens are expired this option should be set to a single value for better -# performance. (list value) -#hash_algorithms = md5 - -# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri. -# (string value) -#auth_admin_prefix = - -# Host providing the admin Identity API endpoint. Deprecated, use identity_uri. -# (string value) -#auth_host = 127.0.0.1 - -# Port of the admin Identity API endpoint. Deprecated, use identity_uri. -# (integer value) -#auth_port = 35357 - -# Protocol of the admin Identity API endpoint (http or https). Deprecated, use -# identity_uri. (string value) -#auth_protocol = https - -# Complete admin Identity API endpoint. This should specify the unversioned -# root endpoint e.g. https://localhost:35357/ (string value) -identity_uri = http://{{ CONTROLLER_HOST_ADDRESS }}:35357 - -# This option is deprecated and may be removed in a future release. Single -# shared secret with the Keystone configuration used for bootstrapping a -# Keystone installation, or otherwise bypassing the normal authentication -# process. This option should not be used, use `admin_user` and -# `admin_password` instead. (string value) -#admin_token = <None> - -# Service username. (string value) -admin_user = {{ NOVA_SERVICE_USER }} - -# Service user password. (string value) -admin_password = {{ NOVA_SERVICE_PASSWORD }} - -# Service tenant name. (string value) -admin_tenant_name = service - - -[libvirt] - -# -# Options defined in nova.virt.libvirt.driver -# - -# Rescue ami image. This will not be used if an image id is -# provided by the user. (string value) -#rescue_image_id=<None> - -# Rescue aki image (string value) -#rescue_kernel_id=<None> - -# Rescue ari image (string value) -#rescue_ramdisk_id=<None> - -# Libvirt domain type (valid options are: kvm, lxc, qemu, uml, -# xen and parallels) (string value) -virt_type={{ NOVA_VIRT_TYPE }} - -# Override the default libvirt URI (which is dependent on -# virt_type) (string value) -#connection_uri= - -# Inject the admin password at boot time, without an agent. -# (boolean value) -#inject_password=false - -# Inject the ssh public key at boot time (boolean value) -#inject_key=false - -# The partition to inject to : -2 => disable, -1 => inspect -# (libguestfs only), 0 => not partitioned, >0 => partition -# number (integer value) -#inject_partition=-2 - -# Sync virtual and real mouse cursors in Windows VMs (boolean -# value) -#use_usb_tablet=true - -# Migration target URI (any included "%s" is replaced with the -# migration target hostname) (string value) -#live_migration_uri=qemu+tcp://%s/system - -# Migration flags to be set for live migration (string value) -#live_migration_flag=VIR_MIGRATE_UNDEFINE_SOURCE, VIR_MIGRATE_PEER2PEER, VIR_MIGRATE_LIVE, VIR_MIGRATE_TUNNELLED - -# Migration flags to be set for block migration (string value) -#block_migration_flag=VIR_MIGRATE_UNDEFINE_SOURCE, VIR_MIGRATE_PEER2PEER, VIR_MIGRATE_LIVE, VIR_MIGRATE_TUNNELLED, VIR_MIGRATE_NON_SHARED_INC - -# Maximum bandwidth to be used during migration, in Mbps -# (integer value) -#live_migration_bandwidth=0 - -# Snapshot image format (valid options are : raw, qcow2, vmdk, -# vdi). Defaults to same as source image (string value) -#snapshot_image_format=<None> - -# Override the default disk prefix for the devices attached to -# a server, which is dependent on virt_type. (valid options -# are: sd, xvd, uvd, vd) (string value) -#disk_prefix=<None> - -# Number of seconds to wait for instance to shut down after -# soft reboot request is made. We fall back to hard reboot if -# instance does not shutdown within this window. (integer -# value) -#wait_soft_reboot_seconds=120 - -# Set to "host-model" to clone the host CPU feature flags; to -# "host-passthrough" to use the host CPU model exactly; to -# "custom" to use a named CPU model; to "none" to not set any -# CPU model. If virt_type="kvm|qemu", it will default to -# "host-model", otherwise it will default to "none" (string -# value) -#cpu_mode=<None> - -# Set to a named libvirt CPU model (see names listed in -# /usr/share/libvirt/cpu_map.xml). Only has effect if -# cpu_mode="custom" and virt_type="kvm|qemu" (string value) -#cpu_model=<None> - -# Location where libvirt driver will store snapshots before -# uploading them to image service (string value) -#snapshots_directory=$instances_path/snapshots - -# Location where the Xen hvmloader is kept (string value) -#xen_hvmloader_path=/usr/lib/xen/boot/hvmloader - -# Specific cachemodes to use for different disk types e.g: -# file=directsync,block=none (list value) -#disk_cachemodes= - -# A path to a device that will be used as source of entropy on -# the host. Permitted options are: /dev/random or /dev/hwrng -# (string value) -#rng_dev_path=<None> - -# For qemu or KVM guests, set this option to specify a default -# machine type per host architecture. You can find a list of -# supported machine types in your environment by checking the -# output of the "virsh capabilities"command. The format of the -# value for this config option is host-arch=machine-type. For -# example: x86_64=machinetype1,armv7l=machinetype2 (list -# value) -#hw_machine_type=<None> - -# The data source used to the populate the host "serial" UUID -# exposed to guest in the virtual BIOS. Permitted options are -# "hardware", "os", "none" or "auto" (default). (string value) -#sysinfo_serial=auto - -# A number of seconds to memory usage statistics period. Zero -# or negative value mean to disable memory usage statistics. -# (integer value) -#mem_stats_period_seconds=10 - -# List of uid targets and ranges.Syntax is guest-uid:host- -# uid:countMaximum of 5 allowed. (list value) -#uid_maps= - -# List of guid targets and ranges.Syntax is guest-gid:host- -# gid:countMaximum of 5 allowed. (list value) -#gid_maps= - - -# -# Options defined in nova.virt.libvirt.imagebackend -# - -# VM Images format. Acceptable values are: raw, qcow2, lvm, -# rbd, default. If default is specified, then use_cow_images -# flag is used instead of this one. (string value) -#images_type=default - -# LVM Volume Group that is used for VM images, when you -# specify images_type=lvm. (string value) -#images_volume_group=<None> - -# Create sparse logical volumes (with virtualsize) if this -# flag is set to True. (boolean value) -#sparse_logical_volumes=false - -# The RADOS pool in which rbd volumes are stored (string -# value) -#images_rbd_pool=rbd - -# Path to the ceph configuration file to use (string value) -#images_rbd_ceph_conf= - -# Discard option for nova managed disks (valid options are: -# ignore, unmap). Need Libvirt(1.0.6) Qemu1.5 (raw format) -# Qemu1.6(qcow2 format) (string value) -#hw_disk_discard=<None> - - -# -# Options defined in nova.virt.libvirt.imagecache -# - -# Allows image information files to be stored in non-standard -# locations (string value) -#image_info_filename_pattern=$instances_path/$image_cache_subdirectory_name/%(image)s.info - -# Should unused kernel images be removed? This is only safe to -# enable if all compute nodes have been updated to support -# this option. This will be enabled by default in future. -# (boolean value) -#remove_unused_kernels=false - -# Unused resized base images younger than this will not be -# removed (integer value) -#remove_unused_resized_minimum_age_seconds=3600 - -# Write a checksum for files in _base to disk (boolean value) -#checksum_base_images=false - -# How frequently to checksum base images (integer value) -#checksum_interval_seconds=3600 - - -# -# Options defined in nova.virt.libvirt.lvm -# - -# Method used to wipe old volumes (valid options are: none, -# zero, shred) (string value) -#volume_clear=zero - -# Size in MiB to wipe at start of old volumes. 0 => all -# (integer value) -#volume_clear_size=0 - - -# -# Options defined in nova.virt.libvirt.utils -# - -# Compress snapshot images when possible. This currently -# applies exclusively to qcow2 images (boolean value) -#snapshot_compression=false - - -# -# Options defined in nova.virt.libvirt.vif -# - -# Use virtio for bridge interfaces with KVM/QEMU (boolean -# value) -#use_virtio_for_bridges=true - - -# -# Options defined in nova.virt.libvirt.volume -# - -# Number of times to rescan iSCSI target to find volume -# (integer value) -#num_iscsi_scan_tries=5 - -# Number of times to rescan iSER target to find volume -# (integer value) -#num_iser_scan_tries=5 - -# The RADOS client name for accessing rbd volumes (string -# value) -#rbd_user=<None> - -# The libvirt UUID of the secret for the rbd_uservolumes -# (string value) -#rbd_secret_uuid=<None> - -# Directory where the NFS volume is mounted on the compute -# node (string value) -#nfs_mount_point_base=$state_path/mnt - -# Mount options passed to the NFS client. See section of the -# nfs man page for details (string value) -#nfs_mount_options=<None> - -# Directory where the SMBFS shares are mounted on the compute -# node (string value) -#smbfs_mount_point_base=$state_path/mnt - -# Mount options passed to the SMBFS client. See mount.cifs man -# page for details. Note that the libvirt-qemu uid and gid -# must be specified. (string value) -#smbfs_mount_options= - -# Number of times to rediscover AoE target to find volume -# (integer value) -#num_aoe_discover_tries=3 - -# Directory where the glusterfs volume is mounted on the -# compute node (string value) -#glusterfs_mount_point_base=$state_path/mnt - -# Use multipath connection of the iSCSI volume (boolean value) -#iscsi_use_multipath=false - -# Use multipath connection of the iSER volume (boolean value) -#iser_use_multipath=false - -# Path or URL to Scality SOFS configuration file (string -# value) -#scality_sofs_config=<None> - -# Base dir where Scality SOFS shall be mounted (string value) -#scality_sofs_mount_point=$state_path/scality - -# Protocols listed here will be accessed directly from QEMU. -# Currently supported protocols: [gluster] (list value) -#qemu_allowed_storage_drivers= - -# Directory where the Quobyte volume is mounted on the compute -# node (string value) -#quobyte_mount_point_base=$state_path/mnt - -# Path to a Quobyte Client configuration file. (string value) -#quobyte_client_cfg=<None> - -# The iSCSI transport iface to use to connect to target in -# case offload support is desired. Supported transports are -# be2iscsi, bnx2i, cxgb3i, cxgb4i, qla4xxx and ocs. Default -# format is transport_name.hwaddress and can be generated -# manually or via iscsiadm -m iface (string value) -# Deprecated group/name - [DEFAULT]/iscsi_transport -#iscsi_iface=<None> - - -[metrics] - -# -# Options defined in nova.scheduler.weights.metrics -# - -# Multiplier used for weighing metrics. (floating point value) -#weight_multiplier=1.0 - -# How the metrics are going to be weighed. This should be in -# the form of "<name1>=<ratio1>, <name2>=<ratio2>, ...", where -# <nameX> is one of the metrics to be weighed, and <ratioX> is -# the corresponding ratio. So for "name1=1.0, name2=-1.0" The -# final weight would be name1.value * 1.0 + name2.value * -# -1.0. (list value) -#weight_setting= - -# How to treat the unavailable metrics. When a metric is NOT -# available for a host, if it is set to be True, it would -# raise an exception, so it is recommended to use the -# scheduler filter MetricFilter to filter out those hosts. If -# it is set to be False, the unavailable metric would be -# treated as a negative factor in weighing process, the -# returned value would be set by the option -# weight_of_unavailable. (boolean value) -#required=true - -# The final weight value to be returned if required is set to -# False and any one of the metrics set by weight_setting is -# unavailable. (floating point value) -#weight_of_unavailable=-10000.0 - - -[neutron] - -# -# Options defined in nova.api.metadata.handler -# - -# Set flag to indicate Neutron will proxy metadata requests -# and resolve instance ids. (boolean value) -service_metadata_proxy=True - -# Shared secret to validate proxies Neutron metadata requests -# (string value) -metadata_proxy_shared_secret={{ METADATA_PROXY_SHARED_SECRET }} - - -# -# Options defined in nova.network.neutronv2.api -# - -# URL for connecting to neutron (string value) -url=http://{{ CONTROLLER_HOST_ADDRESS }}:9696 - -# User id for connecting to neutron in admin context. -# DEPRECATED: specify an auth_plugin and appropriate -# credentials instead. (string value) -#admin_user_id=<None> - -# Username for connecting to neutron in admin context -# DEPRECATED: specify an auth_plugin and appropriate -# credentials instead. (string value) -admin_username={{ NEUTRON_SERVICE_USER }} - -# Password for connecting to neutron in admin context -# DEPRECATED: specify an auth_plugin and appropriate -# credentials instead. (string value) -admin_password={{ NEUTRON_SERVICE_PASSWORD }} - -# Tenant id for connecting to neutron in admin context -# DEPRECATED: specify an auth_plugin and appropriate -# credentials instead. (string value) -#admin_tenant_id=<None> - -# Tenant name for connecting to neutron in admin context. This -# option will be ignored if neutron_admin_tenant_id is set. -# Note that with Keystone V3 tenant names are only unique -# within a domain. DEPRECATED: specify an auth_plugin and -# appropriate credentials instead. (string value) -admin_tenant_name=service - -# Region name for connecting to neutron in admin context -# (string value) -#region_name=<None> - -# Authorization URL for connecting to neutron in admin -# context. DEPRECATED: specify an auth_plugin and appropriate -# credentials instead. (string value) -admin_auth_url=http://{{ CONTROLLER_HOST_ADDRESS }}:35357/v2.0 - -# Authorization strategy for connecting to neutron in admin -# context. DEPRECATED: specify an auth_plugin and appropriate -# credentials instead. If an auth_plugin is specified strategy -# will be ignored. (string value) -auth_strategy=keystone - -# Name of Integration Bridge used by Open vSwitch (string -# value) -#ovs_bridge=br-int - -# Number of seconds before querying neutron for extensions -# (integer value) -#extension_sync_interval=600 - -# DEPRECATED: Allow an instance to have multiple vNICs -# attached to the same Neutron network. This option is -# deprecated in the 2015.1 release and will be removed in the -# 2015.2 release where the default behavior will be to always -# allow multiple ports from the same network to be attached to -# an instance. (boolean value) -#allow_duplicate_networks=false - - -[osapi_v3] - -# -# Options defined in nova.api.openstack -# - -# Whether the V3 API is enabled or not (boolean value) -#enabled=false - -# A list of v3 API extensions to never load. Specify the -# extension aliases here. (list value) -#extensions_blacklist= - -# If the list is not empty then a v3 API extension will only -# be loaded if it exists in this list. Specify the extension -# aliases here. (list value) -#extensions_whitelist= - - -[rdp] - -# -# Options defined in nova.rdp -# - -# Location of RDP html5 console proxy, in the form -# "http://127.0.0.1:6083/" (string value) -#html5_proxy_base_url=http://127.0.0.1:6083/ - -# Enable RDP related features (boolean value) -#enabled=false - - -[serial_console] - -# -# Options defined in nova.cmd.serialproxy -# - -# Host on which to listen for incoming requests (string value) -serialproxy_host=127.0.0.1 - -# Port on which to listen for incoming requests (integer -# value) -#serialproxy_port=6083 - - -# -# Options defined in nova.console.serial -# - -# Enable serial console related features (boolean value) -enabled=false - -# Range of TCP ports to use for serial ports on compute hosts -# (string value) -#port_range=10000:20000 - -# Location of serial console proxy. (string value) -#base_url=ws://127.0.0.1:6083/ - -# IP address on which instance serial console should listen -# (string value) -#listen=127.0.0.1 - -# The address to which proxy clients (like nova-serialproxy) -# should connect (string value) -#proxyclient_address=127.0.0.1 - - -[spice] - -# -# Options defined in nova.cmd.spicehtml5proxy -# - -# Host on which to listen for incoming requests (string value) -#html5proxy_host=0.0.0.0 - -# Port on which to listen for incoming requests (integer -# value) -#html5proxy_port=6082 - - -# -# Options defined in nova.spice -# - -# Location of spice HTML5 console proxy, in the form -# "http://127.0.0.1:6082/spice_auto.html" (string value) -#html5proxy_base_url=http://127.0.0.1:6082/spice_auto.html - -# IP address on which instance spice server should listen -# (string value) -#server_listen=127.0.0.1 - -# The address to which proxy clients (like nova- -# spicehtml5proxy) should connect (string value) -#server_proxyclient_address=127.0.0.1 - -# Enable spice related features (boolean value) -enabled=false - -# Enable spice guest agent support (boolean value) -#agent_enabled=true - -# Keymap for spice (string value) -#keymap=en-us - - -[ssl] - -# -# Options defined in nova.openstack.common.sslutils -# - -# CA certificate file to use to verify connecting clients. -# (string value) -#ca_file=<None> - -# Certificate file to use when starting the server securely. -# (string value) -#cert_file=<None> - -# Private key file to use when starting the server securely. -# (string value) -#key_file=<None> - - -[trusted_computing] - -# -# Options defined in nova.scheduler.filters.trusted_filter -# - -# Attestation server HTTP (string value) -#attestation_server=<None> - -# Attestation server Cert file for Identity verification -# (string value) -#attestation_server_ca_file=<None> - -# Attestation server port (string value) -#attestation_port=8443 - -# Attestation web API URL (string value) -#attestation_api_url=/OpenAttestationWebServices/V1.0 - -# Attestation authorization blob - must change (string value) -#attestation_auth_blob=<None> - -# Attestation status cache valid period length (integer value) -#attestation_auth_timeout=60 - -# Disable SSL cert verification for Attestation service -# (boolean value) -#attestation_insecure_ssl=false - - -[upgrade_levels] - -# -# Options defined in nova.baserpc -# - -# Set a version cap for messages sent to the base api in any -# service (string value) -#baseapi=<None> - - -# -# Options defined in nova.cells.rpc_driver -# - -# Set a version cap for messages sent between cells services -# (string value) -#intercell=<None> - - -# -# Options defined in nova.cells.rpcapi -# - -# Set a version cap for messages sent to local cells services -# (string value) -#cells=<None> - - -# -# Options defined in nova.cert.rpcapi -# - -# Set a version cap for messages sent to cert services (string -# value) -#cert=<None> - - -# -# Options defined in nova.compute.rpcapi -# - -# Set a version cap for messages sent to compute services. If -# you plan to do a live upgrade from havana to icehouse, you -# should set this option to "icehouse-compat" before beginning -# the live upgrade procedure. (string value) -#compute=<None> - - -# -# Options defined in nova.conductor.rpcapi -# - -# Set a version cap for messages sent to conductor services -# (string value) -#conductor=<None> - - -# -# Options defined in nova.console.rpcapi -# - -# Set a version cap for messages sent to console services -# (string value) -#console=<None> - - -# -# Options defined in nova.consoleauth.rpcapi -# - -# Set a version cap for messages sent to consoleauth services -# (string value) -#consoleauth=<None> - - -# -# Options defined in nova.network.rpcapi -# - -# Set a version cap for messages sent to network services -# (string value) -#network=<None> - - -# -# Options defined in nova.scheduler.rpcapi -# - -# Set a version cap for messages sent to scheduler services -# (string value) -#scheduler=<None> - - -[vmware] - -# -# Options defined in nova.virt.vmwareapi.driver -# - -# The PBM status. (boolean value) -#pbm_enabled=false - -# PBM service WSDL file location URL. e.g. -# file:///opt/SDK/spbm/wsdl/pbmService.wsdl Not setting this -# will disable storage policy based placement of instances. -# (string value) -#pbm_wsdl_location=<None> - -# The PBM default policy. If pbm_wsdl_location is set and -# there is no defined storage policy for the specific request -# then this policy will be used. (string value) -#pbm_default_policy=<None> - -# Hostname or IP address for connection to VMware VC host. -# (string value) -#host_ip=<None> - -# Port for connection to VMware VC host. (integer value) -#host_port=443 - -# Username for connection to VMware VC host. (string value) -#host_username=<None> - -# Password for connection to VMware VC host. (string value) -#host_password=<None> - -# Name of a VMware Cluster ComputeResource. (multi valued) -#cluster_name=<None> - -# Regex to match the name of a datastore. (string value) -#datastore_regex=<None> - -# The interval used for polling of remote tasks. (floating -# point value) -#task_poll_interval=0.5 - -# The number of times we retry on failures, e.g., socket -# error, etc. (integer value) -#api_retry_count=10 - -# VNC starting port (integer value) -#vnc_port=5900 - -# Total number of VNC ports (integer value) -#vnc_port_total=10000 - -# Whether to use linked clone (boolean value) -#use_linked_clone=true - -# Optional VIM Service WSDL Location e.g -# http://<server>/vimService.wsdl. Optional over-ride to -# default location for bug work-arounds (string value) -#wsdl_location=<None> - - -# -# Options defined in nova.virt.vmwareapi.vif -# - -# Physical ethernet adapter name for vlan networking (string -# value) -#vlan_interface=vmnic0 - -# Name of Integration Bridge (string value) -#integration_bridge=br-int - - -# -# Options defined in nova.virt.vmwareapi.vim_util -# - -# The maximum number of ObjectContent data objects that should -# be returned in a single result. A positive value will cause -# the operation to suspend the retrieval when the count of -# objects reaches the specified maximum. The server may still -# limit the count to something less than the configured value. -# Any remaining objects may be retrieved with additional -# requests. (integer value) -#maximum_objects=100 - - -# -# Options defined in nova.virt.vmwareapi.vmops -# - -# The prefix for Where cached images are stored. This is NOT -# the full path - just a folder prefix. This should only be -# used when a datastore cache should be shared between compute -# nodes. Note: this should only be used when the compute nodes -# have a shared file system. (string value) -#cache_prefix=<None> - - -[workarounds] - -# -# Options defined in nova.utils -# - -# This option allows a fallback to sudo for performance -# reasons. For example see -# https://bugs.launchpad.net/nova/+bug/1415106 (boolean value) -#disable_rootwrap=false - -# When using libvirt 1.2.2 fails live snapshots intermittently -# under load. This config option provides mechanism to -# disable livesnapshot while this is resolved. See -# https://bugs.launchpad.net/nova/+bug/1334398 (boolean value) -#disable_libvirt_livesnapshot=true - -# Whether to destroy instances on startup when we suspect they -# have previously been evacuated. This can result in data loss -# if undesired. See https://launchpad.net/bugs/1419785 -# (boolean value) -#destroy_after_evacuate=true - - -[xenserver] - -# -# Options defined in nova.virt.xenapi.agent -# - -# Number of seconds to wait for agent reply (integer value) -#agent_timeout=30 - -# Number of seconds to wait for agent to be fully operational -# (integer value) -#agent_version_timeout=300 - -# Number of seconds to wait for agent reply to resetnetwork -# request (integer value) -#agent_resetnetwork_timeout=60 - -# Specifies the path in which the XenAPI guest agent should be -# located. If the agent is present, network configuration is -# not injected into the image. Used if -# compute_driver=xenapi.XenAPIDriver and flat_injected=True -# (string value) -#agent_path=usr/sbin/xe-update-networking - -# Disables the use of the XenAPI agent in any image regardless -# of what image properties are present. (boolean value) -#disable_agent=false - -# Determines if the XenAPI agent should be used when the image -# used does not contain a hint to declare if the agent is -# present or not. The hint is a glance property -# "xenapi_use_agent" that has the value "True" or "False". -# Note that waiting for the agent when it is not present will -# significantly increase server boot times. (boolean value) -#use_agent_default=false - - -# -# Options defined in nova.virt.xenapi.client.session -# - -# Timeout in seconds for XenAPI login. (integer value) -#login_timeout=10 - -# Maximum number of concurrent XenAPI connections. Used only -# if compute_driver=xenapi.XenAPIDriver (integer value) -#connection_concurrent=5 - - -# -# Options defined in nova.virt.xenapi.driver -# - -# URL for connection to XenServer/Xen Cloud Platform. A -# special value of unix://local can be used to connect to the -# local unix socket. Required if -# compute_driver=xenapi.XenAPIDriver (string value) -#connection_url=<None> - -# Username for connection to XenServer/Xen Cloud Platform. -# Used only if compute_driver=xenapi.XenAPIDriver (string -# value) -#connection_username=root - -# Password for connection to XenServer/Xen Cloud Platform. -# Used only if compute_driver=xenapi.XenAPIDriver (string -# value) -#connection_password=<None> - -# The interval used for polling of coalescing vhds. Used only -# if compute_driver=xenapi.XenAPIDriver (floating point value) -#vhd_coalesce_poll_interval=5.0 - -# Ensure compute service is running on host XenAPI connects -# to. (boolean value) -#check_host=true - -# Max number of times to poll for VHD to coalesce. Used only -# if compute_driver=xenapi.XenAPIDriver (integer value) -#vhd_coalesce_max_attempts=20 - -# Base path to the storage repository (string value) -#sr_base_path=/var/run/sr-mount - -# The iSCSI Target Host (string value) -#target_host=<None> - -# The iSCSI Target Port, default is port 3260 (string value) -#target_port=3260 - -# IQN Prefix (string value) -#iqn_prefix=iqn.2010-10.org.openstack - -# Used to enable the remapping of VBD dev (Works around an -# issue in Ubuntu Maverick) (boolean value) -#remap_vbd_dev=false - -# Specify prefix to remap VBD dev to (ex. /dev/xvdb -> -# /dev/sdb) (string value) -#remap_vbd_dev_prefix=sd - - -# -# Options defined in nova.virt.xenapi.image.bittorrent -# - -# Base URL for torrent files. (string value) -#torrent_base_url=<None> - -# Probability that peer will become a seeder. (1.0 = 100%) -# (floating point value) -#torrent_seed_chance=1.0 - -# Number of seconds after downloading an image via BitTorrent -# that it should be seeded for other peers. (integer value) -#torrent_seed_duration=3600 - -# Cached torrent files not accessed within this number of -# seconds can be reaped (integer value) -#torrent_max_last_accessed=86400 - -# Beginning of port range to listen on (integer value) -#torrent_listen_port_start=6881 - -# End of port range to listen on (integer value) -#torrent_listen_port_end=6891 - -# Number of seconds a download can remain at the same progress -# percentage w/o being considered a stall (integer value) -#torrent_download_stall_cutoff=600 - -# Maximum number of seeder processes to run concurrently -# within a given dom0. (-1 = no limit) (integer value) -#torrent_max_seeder_processes_per_host=1 - - -# -# Options defined in nova.virt.xenapi.pool -# - -# To use for hosts with different CPUs (boolean value) -#use_join_force=true - - -# -# Options defined in nova.virt.xenapi.vif -# - -# Name of Integration Bridge used by Open vSwitch (string -# value) -#ovs_integration_bridge=xapi1 - - -# -# Options defined in nova.virt.xenapi.vm_utils -# - -# Cache glance images locally. `all` will cache all images, -# `some` will only cache images that have the image_property -# `cache_in_nova=True`, and `none` turns off caching entirely -# (string value) -#cache_images=all - -# Compression level for images, e.g., 9 for gzip -9. Range is -# 1-9, 9 being most compressed but most CPU intensive on dom0. -# (integer value) -#image_compression_level=<None> - -# Default OS type (string value) -#default_os_type=linux - -# Time to wait for a block device to be created (integer -# value) -#block_device_creation_timeout=10 - -# Maximum size in bytes of kernel or ramdisk images (integer -# value) -#max_kernel_ramdisk_size=16777216 - -# Filter for finding the SR to be used to install guest -# instances on. To use the Local Storage in default -# XenServer/XCP installations set this flag to other-config -# :i18n-key=local-storage. To select an SR with a different -# matching criteria, you could set it to other- -# config:my_favorite_sr=true. On the other hand, to fall back -# on the Default SR, as displayed by XenCenter, set this flag -# to: default-sr:true (string value) -#sr_matching_filter=default-sr:true - -# Whether to use sparse_copy for copying data on a resize down -# (False will use standard dd). This speeds up resizes down -# considerably since large runs of zeros won't have to be -# rsynced (boolean value) -#sparse_copy=true - -# Maximum number of retries to unplug VBD. if <=0, should try -# once and no retry (integer value) -#num_vbd_unplug_retries=10 - -# Whether or not to download images via Bit Torrent -# (all|some|none). (string value) -#torrent_images=none - -# Name of network to use for booting iPXE ISOs (string value) -#ipxe_network_name=<None> - -# URL to the iPXE boot menu (string value) -#ipxe_boot_menu_url=<None> - -# Name and optionally path of the tool used for ISO image -# creation (string value) -#ipxe_mkisofs_cmd=mkisofs - - -# -# Options defined in nova.virt.xenapi.vmops -# - -# Number of seconds to wait for instance to go to running -# state (integer value) -#running_timeout=60 - -# The XenAPI VIF driver using XenServer Network APIs. (string -# value) -#vif_driver=nova.virt.xenapi.vif.XenAPIBridgeDriver - -# Dom0 plugin driver used to handle image uploads. (string -# value) -#image_upload_handler=nova.virt.xenapi.image.glance.GlanceStore - - -# -# Options defined in nova.virt.xenapi.volume_utils -# - -# Number of seconds to wait for an SR to settle if the VDI -# does not exist when first introduced (integer value) -#introduce_vdi_retry_wait=20 - - -[zookeeper] - -# -# Options defined in nova.servicegroup.drivers.zk -# - -# The ZooKeeper addresses for servicegroup service in the -# format of host1:port,host2:port,host3:port (string value) -#address=<None> - -# The recv_timeout parameter for the zk session (integer -# value) -#recv_timeout=4000 - -# The prefix used in ZooKeeper to store ephemeral nodes -# (string value) -#sg_prefix=/servicegroups - -# Number of seconds to wait until retrying to join the session -# (integer value) -#sg_retry_interval=5 - - -[matchmaker_redis] - -# -# From oslo.messaging -# - -# Host to locate redis. (string value) -#host = 127.0.0.1 - -# Use this port to connect to redis host. (integer value) -#port = 6379 - -# Password for Redis server (optional). (string value) -#password = <None> - - -[matchmaker_ring] - -# -# From oslo.messaging -# - -# Matchmaker ring file (JSON). (string value) -# Deprecated group/name - [DEFAULT]/matchmaker_ringfile -#ringfile = /etc/oslo/matchmaker_ring.json - - -[oslo_concurrency] - -# -# From oslo.concurrency -# - -# Enables or disables inter-process locks. (boolean value) -# Deprecated group/name - [DEFAULT]/disable_process_locking -#disable_process_locking = false - -# Directory to use for lock files. For security, the specified directory -# should only be writable by the user running the processes that need locking. -# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, -# a lock path must be set. (string value) -# Deprecated group/name - [DEFAULT]/lock_path -lock_path = /var/lock/nova - - -[oslo_messaging_amqp] - -# -# From oslo.messaging -# - -# address prefix used when sending to a specific server (string value) -# Deprecated group/name - [amqp1]/server_request_prefix -#server_request_prefix = exclusive - -# address prefix used when broadcasting to all servers (string value) -# Deprecated group/name - [amqp1]/broadcast_prefix -#broadcast_prefix = broadcast - -# address prefix when sending to any server in group (string value) -# Deprecated group/name - [amqp1]/group_request_prefix -#group_request_prefix = unicast - -# Name for the AMQP container (string value) -# Deprecated group/name - [amqp1]/container_name -#container_name = <None> - -# Timeout for inactive connections (in seconds) (integer value) -# Deprecated group/name - [amqp1]/idle_timeout -#idle_timeout = 0 - -# Debug: dump AMQP frames to stdout (boolean value) -# Deprecated group/name - [amqp1]/trace -#trace = false - -# CA certificate PEM file for verifing server certificate (string value) -# Deprecated group/name - [amqp1]/ssl_ca_file -#ssl_ca_file = - -# Identifying certificate PEM file to present to clients (string value) -# Deprecated group/name - [amqp1]/ssl_cert_file -#ssl_cert_file = - -# Private key PEM file used to sign cert_file certificate (string value) -# Deprecated group/name - [amqp1]/ssl_key_file -#ssl_key_file = - -# Password for decrypting ssl_key_file (if encrypted) (string value) -# Deprecated group/name - [amqp1]/ssl_key_password -#ssl_key_password = <None> - -# Accept clients using either SSL or plain TCP (boolean value) -# Deprecated group/name - [amqp1]/allow_insecure_clients -#allow_insecure_clients = false - - -[oslo_messaging_qpid] - -# -# From oslo.messaging -# - -# Use durable queues in AMQP. (boolean value) -# Deprecated group/name - [DEFAULT]/rabbit_durable_queues -#amqp_durable_queues = false - -# Auto-delete queues in AMQP. (boolean value) -# Deprecated group/name - [DEFAULT]/amqp_auto_delete -#amqp_auto_delete = false - -# Size of RPC connection pool. (integer value) -# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size -#rpc_conn_pool_size = 30 - -# Qpid broker hostname. (string value) -# Deprecated group/name - [DEFAULT]/qpid_hostname -#qpid_hostname = localhost - -# Qpid broker port. (integer value) -# Deprecated group/name - [DEFAULT]/qpid_port -#qpid_port = 5672 - -# Qpid HA cluster host:port pairs. (list value) -# Deprecated group/name - [DEFAULT]/qpid_hosts -#qpid_hosts = $qpid_hostname:$qpid_port - -# Username for Qpid connection. (string value) -# Deprecated group/name - [DEFAULT]/qpid_username -#qpid_username = - -# Password for Qpid connection. (string value) -# Deprecated group/name - [DEFAULT]/qpid_password -#qpid_password = - -# Space separated list of SASL mechanisms to use for auth. (string value) -# Deprecated group/name - [DEFAULT]/qpid_sasl_mechanisms -#qpid_sasl_mechanisms = - -# Seconds between connection keepalive heartbeats. (integer value) -# Deprecated group/name - [DEFAULT]/qpid_heartbeat -#qpid_heartbeat = 60 - -# Transport to use, either 'tcp' or 'ssl'. (string value) -# Deprecated group/name - [DEFAULT]/qpid_protocol -#qpid_protocol = tcp - -# Whether to disable the Nagle algorithm. (boolean value) -# Deprecated group/name - [DEFAULT]/qpid_tcp_nodelay -#qpid_tcp_nodelay = true - -# The number of prefetched messages held by receiver. (integer value) -# Deprecated group/name - [DEFAULT]/qpid_receiver_capacity -#qpid_receiver_capacity = 1 - -# The qpid topology version to use. Version 1 is what was originally used by -# impl_qpid. Version 2 includes some backwards-incompatible changes that allow -# broker federation to work. Users should update to version 2 when they are -# able to take everything down, as it requires a clean break. (integer value) -# Deprecated group/name - [DEFAULT]/qpid_topology_version -#qpid_topology_version = 1 - - -[oslo_messaging_rabbit] - -# -# From oslo.messaging -# - -# Use durable queues in AMQP. (boolean value) -# Deprecated group/name - [DEFAULT]/rabbit_durable_queues -#amqp_durable_queues = false - -# Auto-delete queues in AMQP. (boolean value) -# Deprecated group/name - [DEFAULT]/amqp_auto_delete -#amqp_auto_delete = false - -# Size of RPC connection pool. (integer value) -# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size -#rpc_conn_pool_size = 30 - -# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and -# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some -# distributions. (string value) -# Deprecated group/name - [DEFAULT]/kombu_ssl_version -#kombu_ssl_version = - -# SSL key file (valid only if SSL enabled). (string value) -# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile -#kombu_ssl_keyfile = - -# SSL cert file (valid only if SSL enabled). (string value) -# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile -#kombu_ssl_certfile = - -# SSL certification authority file (valid only if SSL enabled). (string value) -# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs -#kombu_ssl_ca_certs = - -# How long to wait before reconnecting in response to an AMQP consumer cancel -# notification. (floating point value) -# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay -#kombu_reconnect_delay = 1.0 - -# The RabbitMQ broker address where a single node is used. (string value) -# Deprecated group/name - [DEFAULT]/rabbit_host -rabbit_host = {{ RABBITMQ_HOST }} - -# The RabbitMQ broker port where a single node is used. (integer value) -# Deprecated group/name - [DEFAULT]/rabbit_port -rabbit_port = {{ RABBITMQ_PORT }} - -# RabbitMQ HA cluster host:port pairs. (list value) -# Deprecated group/name - [DEFAULT]/rabbit_hosts -#rabbit_hosts = $rabbit_host:$rabbit_port - -# Connect over SSL for RabbitMQ. (boolean value) -# Deprecated group/name - [DEFAULT]/rabbit_use_ssl -rabbit_use_ssl = false - -# The RabbitMQ userid. (string value) -# Deprecated group/name - [DEFAULT]/rabbit_userid -rabbit_userid = {{ RABBITMQ_USER }} - -# The RabbitMQ password. (string value) -# Deprecated group/name - [DEFAULT]/rabbit_password -rabbit_password = {{ RABBITMQ_PASSWORD }} - -# The RabbitMQ login method. (string value) -# Deprecated group/name - [DEFAULT]/rabbit_login_method -#rabbit_login_method = AMQPLAIN - -# The RabbitMQ virtual host. (string value) -# Deprecated group/name - [DEFAULT]/rabbit_virtual_host -#rabbit_virtual_host = / - -# How frequently to retry connecting with RabbitMQ. (integer value) -#rabbit_retry_interval = 1 - -# How long to backoff for between retries when connecting to RabbitMQ. (integer -# value) -# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff -#rabbit_retry_backoff = 2 - -# Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry -# count). (integer value) -# Deprecated group/name - [DEFAULT]/rabbit_max_retries -#rabbit_max_retries = 0 - -# Use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you -# must wipe the RabbitMQ database. (boolean value) -# Deprecated group/name - [DEFAULT]/rabbit_ha_queues -#rabbit_ha_queues = false - -# Number of seconds after which the Rabbit broker is considered down if -# heartbeat's keep-alive fails (0 disable the heartbeat). (integer value) -#heartbeat_timeout_threshold = 60 - -# How often times during the heartbeat_timeout_threshold we check the -# heartbeat. (integer value) -#heartbeat_rate = 2 - -# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value) -# Deprecated group/name - [DEFAULT]/fake_rabbit -#fake_rabbit = false |