# -*- python -*-
# ex: set syntax=python:

# This is a sample buildmaster config file. It must be installed as
# 'master.cfg' in your buildmaster's base directory.

# This is the dictionary that the buildmaster pays attention to. We also use
# a shorter alias to save typing.
c = BuildmasterConfig = {}

####### BUILDSLAVES

# The 'slaves' list defines the set of recognized buildslaves. Each element is
# a BuildSlave object, specifying a unique slave name and password.  The same
# slave name and password must be configured on the slave.
from buildbot.buildslave import BuildSlave
c['slaves'] = [BuildSlave("example-slave", "pass")]

# 'protocols' contains information about protocols which master will use for
# communicating with slaves.
# You must define at least 'port' option that slaves could connect to your master
# with this protocol.
# 'port' must match the value configured into the buildslaves (with their
# --master option)
c['protocols'] = {'pb': {'port': 9989}}

####### CHANGESOURCES

# the 'change_source' setting tells the buildmaster how it should find out
# about source code changes.  Here we point to the buildbot clone of pyflakes.

from buildbot.changes.pb import PBChangeSource
# interface for incoming triggers
c['change_source'] = []
c['change_source'].append(PBChangeSource(
        port=9999,
        user='orchestration',
        passwd='orchestration'))

from buildbot.changes.filter import ChangeFilter
import imp
orch_config = imp.load_source('module.name', '../../source/orch_config.py')

categories = {}
for _c in orch_config.categories:
    categories[_c] = ChangeFilter(category=_c)

####### SCHEDULERS

# Configure the Schedulers, which decide how to react to incoming changes.  In this
# case, just kick off a 'runtests' build

from buildbot.schedulers.basic import SingleBranchScheduler
from buildbot.schedulers.forcesched import ForceScheduler
from buildbot.changes import filter
c['schedulers'] = []
c['schedulers'].append(SingleBranchScheduler(
                            name = "trigger_firehose_sched",
                            change_filter = categories['repo_update'],
                            treeStableTimer = None,
                            builderNames = ["1. Integration"]))
c['schedulers'].append(SingleBranchScheduler(
                            name = "trigger_builders_sched",
                            change_filter = categories['definitions_update'],
                            treeStableTimer = None,
                            builderNames = ["2. Build"]))
c['schedulers'].append(SingleBranchScheduler(
                            name = "trigger_deploy_sched",
                            change_filter = categories['build_complete'],
                            treeStableTimer = None,
                            builderNames = ["3. Deploy"]))
c['schedulers'].append(SingleBranchScheduler(
                            name = "trigger_testing_sched",
                            change_filter = categories['deploy_complete'],
                            treeStableTimer = None,
                            builderNames = ["4. Test"]))

####### BUILDERS

# The 'builders' list defines the Builders, which tell Buildbot how to perform a build:
# what steps, and which slaves can execute them.  Note that any particular build will
# only take place on one slave.

from buildbot.process.factory import BuildFactory
from buildbot.steps.shell import ShellCommand
from buildbot.plugins import steps, util

firehose_factory = BuildFactory()
firehose_factory.addStep(steps.Git(
        repourl=orch_config.buildslave_scripts,
        mode='incremental'))
repo_name = util.Property('repo_name',default="no repo name given")
firehose_cmd = ["sh","triggers/firehose_trigger.sh",repo_name]
firehose_factory.addStep(ShellCommand(command=firehose_cmd))

builders_factory = BuildFactory()
builders_factory.addStep(steps.Git(
        repourl=orch_config.buildslave_scripts,
        mode='incremental'))
builders_factory.addStep(ShellCommand(command=["sh","get_definitions.sh"]))
force = util.Property('force',default="")
builders_cmd = ["sh","triggers/builders_trigger.sh",force]
builders_factory.addStep(ShellCommand(command=builders_cmd,
                                      timeout=orch_config.build_timeout))

deploy_factory = BuildFactory()
deploy_factory.addStep(steps.Git(
        repourl=orch_config.buildslave_scripts,
        mode='incremental'))
deploy_factory.addStep(ShellCommand(command=["sh","get_definitions.sh"]))
system = util.Property('system',default="no system given")
buildslave_scripts_sha = util.Property('buildslave_scripts_sha',default="no buildslave-scripts sha given")
definitions_sha = util.Property('definitions_sha',default="no definitions sha given")
testing_sha = util.Property('testing_sha',default="no testing sha given")
buildnumber = util.Property('buildnumber',default=0)
deploy_cmd = ["sh","triggers/deploy_trigger.sh",
        system,
        buildnumber,
        buildslave_scripts_sha,
        definitions_sha,
        testing_sha]
deploy_factory.addStep(ShellCommand(command=deploy_cmd,
                                      timeout=orch_config.deploy_timeout))

testing_factory = BuildFactory()
testing_factory.addStep(steps.Git(
        repourl=orch_config.buildslave_scripts,
        mode='incremental'))
artefact = util.Property('artefact',default=0)
testing_sha = util.Property('testing_sha',default="no_testing_sha_given")
testing_cmd = ["sh","triggers/testing_trigger.sh",artefact,testing_sha]
testing_factory.addStep(ShellCommand(command=testing_cmd))

from buildbot.config import BuilderConfig

c['builders'] = []
c['builders'].append(
    BuilderConfig(name="1. Integration",
      slavenames=["example-slave"],
      factory=firehose_factory))
c['builders'].append(
    BuilderConfig(name="2. Build",
      slavenames=["example-slave"],
      factory=builders_factory))
c['builders'].append(
    BuilderConfig(name="3. Deploy",
      slavenames=["example-slave"],
      factory=deploy_factory))
c['builders'].append(
    BuilderConfig(name="4. Test",
      slavenames=["example-slave"],
      factory=testing_factory))

####### STATUS TARGETS

# 'status' is a list of Status Targets. The results of each build will be
# pushed to these targets. buildbot/status/*.py has a variety to choose from,
# including web pages, email senders, and IRC bots.

c['status'] = []

from buildbot.status import html
from buildbot.status.web import authz, auth

authz_cfg=authz.Authz(
    # change any of these to True to enable; see the manual for more
    # options
    auth=auth.BasicAuth([(orch_config.web_user,orch_config.web_user_password)]),
    gracefulShutdown = False,
    forceBuild = 'auth', # use this to test your slave once it is set up
    forceAllBuilds = False,
    pingBuilder = False,
    stopBuild = False,
    stopAllBuilds = False,
    cancelPendingBuild = False,
)
c['status'].append(html.WebStatus(http_port=8010, authz=authz_cfg))

####### PROJECT IDENTITY

# the 'title' string will appear at the top of this buildbot
# installation's html.WebStatus home page (linked to the
# 'titleURL') and is embedded in the title of the waterfall HTML page.

c['title'] = "CIAT"
c['titleURL'] = "https://wiki.baserock.org"

# the 'buildbotURL' string should point to the location where the buildbot's
# internal web server (usually the html.WebStatus page) is visible. This
# typically uses the port number set in the Waterfall 'status' entry, but
# with an externally-visible host name which the buildbot cannot figure out
# without some help.

c['buildbotURL'] = "http://0.0.0.0:8010/"

####### DB URL

c['db'] = {
    # This specifies what database buildbot uses to store its state.  You can leave
    # this at its default for all but the largest installations.
    'db_url' : "sqlite:///state.sqlite",
}