Upgraded to latest doxygen configuration file version

    * ACE/etc/ace.doxygen:
    * ACE/etc/ace_inet.doxygen:
    * ACE/etc/ace_qos.doxygen:
    * ACE/etc/ace_rmcast.doxygen:
    * ACE/etc/ace_ssl.doxygen:
    * ACE/etc/acexml.doxygen:
    * TAO/etc/tao.doxygen:
    * TAO/etc/tao_anytypecode.doxygen:
    * TAO/etc/tao_av.doxygen:
    * TAO/etc/tao_compression.doxygen:
    * TAO/etc/tao_cosevent.doxygen:
    * TAO/etc/tao_cosnaming.doxygen:
    * TAO/etc/tao_cosnotification.doxygen:
    * TAO/etc/tao_costime.doxygen:
    * TAO/etc/tao_costrader.doxygen:
    * TAO/etc/tao_dynamicany.doxygen:
    * TAO/etc/tao_dynamicinterface.doxygen:
    * TAO/etc/tao_esf.doxygen:
    * TAO/etc/tao_ifr.doxygen:
    * TAO/etc/tao_implrepo.doxygen:
    * TAO/etc/tao_iormanip.doxygen:
    * TAO/etc/tao_iortable.doxygen:
    * TAO/etc/tao_pi.doxygen:
    * TAO/etc/tao_pi_server.doxygen:
    * TAO/etc/tao_portablegroup.doxygen:
    * TAO/etc/tao_portableserver.doxygen:
    * TAO/etc/tao_rtcorba.doxygen:
    * TAO/etc/tao_rtevent.doxygen:
    * TAO/etc/tao_rtportableserver.doxygen:
    * TAO/etc/tao_security.doxygen:
    * TAO/etc/tao_smartproxies.doxygen:
    * TAO/etc/tao_ssliop.doxygen:
    * TAO/etc/tao_strategies.doxygen:
    * TAO/etc/tao_transportcurrent.doxygen:
    * TAO/etc/tao_ziop.doxygen:

6 files changed, 228 insertions, 174 deletions

diff --git a/ACE/etc/ace.doxygen b/ACE/etc/ace.doxygen
index 97b356c4045..0a460e15941 100644
--- a/ACE/etc/ace.doxygen
+++ b/ACE/etc/ace.doxygen
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.13
+# Doxyfile 1.8.14
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -20,8 +20,8 @@
 # This tag specifies the encoding used for all characters in the config file
 # that follow. The default is UTF-8 which is also the encoding used for all text
 # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
+# built into libc) for the transcoding. See
+# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
 # The default value is: UTF-8.
 
 DOXYFILE_ENCODING      = UTF-8
@@ -226,7 +226,8 @@ TAB_SIZE               = 8
 # will allow you to put the command \sideeffect (or @sideeffect) in the
 # documentation, which will result in a user-defined paragraph with heading
 # "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
+# newlines (in the resulting output). You can put ^^ in the value part of an
+# alias to insert a newline as if a physical newline was in the original file.
 
 ALIASES                =
 
@@ -327,7 +328,7 @@ BUILTIN_STL_SUPPORT    = YES
 CPP_CLI_SUPPORT        = NO
 
 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
 # will parse them like normal C++ but will assume all classes use public instead
 # of private inheritance when no explicit protection keyword is present.
 # The default value is: NO.
@@ -698,7 +699,7 @@ LAYOUT_FILE            =
 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
 # the reference definitions. This must be a list of .bib files. The .bib
 # extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
 # For LaTeX the style of the bibliography can be controlled using
 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
 # search path. See also \cite for info how to create references.
@@ -793,7 +794,7 @@ INPUT                  = docs \
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
 # possible encodings.
 # The default value is: UTF-8.
 
@@ -1004,7 +1005,7 @@ SOURCE_TOOLTIPS        = YES
 # If the USE_HTAGS tag is set to YES then the references to source code will
 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
 # source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
+# (see https://www.gnu.org/software/global/global.html). You will need version
 # 4.8.6 or higher.
 #
 # To use it do the following:
@@ -1149,7 +1150,7 @@ HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the style sheet and background images according to
 # this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
 # purple, and 360 is red again.
 # Minimum value: 0, maximum value: 359, default value: 220.
@@ -1185,6 +1186,17 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
+# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
+# documentation will contain a main index with vertical navigation menus that
+# are dynamically created via Javascript. If disabled, the navigation index will
+# consists of multiple levels of tabs that are statically embedded in every HTML
+# page. Disable this option to support browsers that do not have Javascript,
+# like the Qt help browser.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_MENUS     = YES
+
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded.
@@ -1208,12 +1220,12 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# environment (see: https://developer.apple.com/tools/xcode/), introduced with
 # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
 # Makefile in the HTML output directory. Running make will produce the docset in
 # that directory and running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# startup. See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html
 # for more information.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1329,7 +1341,7 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# (see: http://doc.qt.io/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1337,8 +1349,7 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
+# Folders (see: http://doc.qt.io/qt-4.8/qthelpproject.html#virtual-folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1346,23 +1357,21 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_ATTRS  =
 
 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
 # project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# http://doc.qt.io/qt-4.8/qthelpproject.html#filter-attributes).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_SECT_FILTER_ATTRS  =
@@ -1455,7 +1464,7 @@ EXT_LINKS_IN_WINDOW    = NO
 
 FORMULA_FONTSIZE       = 10
 
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
 # generated for formulas are transparent PNGs. Transparent PNGs are not
 # supported properly for IE 6.0, but are supported on all modern browsers.
 #
@@ -1467,7 +1476,7 @@ FORMULA_FONTSIZE       = 10
 FORMULA_TRANSPARENT    = YES
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
+# https://www.mathjax.org) which uses client side Javascript for the rendering
 # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
 # installed or if you want to formulas look prettier in the HTML output. When
 # enabled you may also need to install MathJax separately and configure the path
@@ -1494,8 +1503,8 @@ MATHJAX_FORMAT         = HTML-CSS
 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
 # Content Delivery Network so you can quickly see the result without installing
 # MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# MathJax from https://www.mathjax.org before deployment.
+# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.2/.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
 MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
@@ -1556,7 +1565,7 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
+# Xapian (see: https://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1569,7 +1578,7 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Xapian (see: https://xapian.org/). See the section "External Indexing and
 # Searching" for details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
@@ -1756,7 +1765,7 @@ LATEX_SOURCE_CODE      = NO
 
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
 # bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
 # The default value is: plain.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -1939,9 +1948,9 @@ DOCBOOK_PROGRAMLISTING = NO
 #---------------------------------------------------------------------------
 
 # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
-# AutoGen Definitions (see http://autogen.sf.net) file that captures the
-# structure of the code including all documentation. Note that this feature is
-# still experimental and incomplete at the moment.
+# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
+# the structure of the code including all documentation. Note that this feature
+# is still experimental and incomplete at the moment.
 # The default value is: NO.
 
 GENERATE_AUTOGEN_DEF   = NO
diff --git a/ACE/etc/ace_inet.doxygen b/ACE/etc/ace_inet.doxygen
index e24ead597b6..5edfaac5d0d 100644
--- a/ACE/etc/ace_inet.doxygen
+++ b/ACE/etc/ace_inet.doxygen
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.13
+# Doxyfile 1.8.14
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -20,8 +20,8 @@
 # This tag specifies the encoding used for all characters in the config file
 # that follow. The default is UTF-8 which is also the encoding used for all text
 # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
+# built into libc) for the transcoding. See
+# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
 # The default value is: UTF-8.
 
 DOXYFILE_ENCODING      = UTF-8
@@ -226,7 +226,8 @@ TAB_SIZE               = 8
 # will allow you to put the command \sideeffect (or @sideeffect) in the
 # documentation, which will result in a user-defined paragraph with heading
 # "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
+# newlines (in the resulting output). You can put ^^ in the value part of an
+# alias to insert a newline as if a physical newline was in the original file.
 
 ALIASES                =
 
@@ -327,7 +328,7 @@ BUILTIN_STL_SUPPORT    = YES
 CPP_CLI_SUPPORT        = NO
 
 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
 # will parse them like normal C++ but will assume all classes use public instead
 # of private inheritance when no explicit protection keyword is present.
 # The default value is: NO.
@@ -698,7 +699,7 @@ LAYOUT_FILE            =
 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
 # the reference definitions. This must be a list of .bib files. The .bib
 # extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
 # For LaTeX the style of the bibliography can be controlled using
 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
 # search path. See also \cite for info how to create references.
@@ -785,7 +786,7 @@ INPUT                  = protocols/ace/INet
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
 # possible encodings.
 # The default value is: UTF-8.
 
@@ -993,7 +994,7 @@ SOURCE_TOOLTIPS        = YES
 # If the USE_HTAGS tag is set to YES then the references to source code will
 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
 # source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
+# (see https://www.gnu.org/software/global/global.html). You will need version
 # 4.8.6 or higher.
 #
 # To use it do the following:
@@ -1138,7 +1139,7 @@ HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the style sheet and background images according to
 # this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
 # purple, and 360 is red again.
 # Minimum value: 0, maximum value: 359, default value: 220.
@@ -1174,6 +1175,17 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
+# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
+# documentation will contain a main index with vertical navigation menus that
+# are dynamically created via Javascript. If disabled, the navigation index will
+# consists of multiple levels of tabs that are statically embedded in every HTML
+# page. Disable this option to support browsers that do not have Javascript,
+# like the Qt help browser.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_MENUS     = YES
+
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded.
@@ -1197,12 +1209,12 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# environment (see: https://developer.apple.com/tools/xcode/), introduced with
 # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
 # Makefile in the HTML output directory. Running make will produce the docset in
 # that directory and running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# startup. See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html
 # for more information.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1318,7 +1330,7 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# (see: http://doc.qt.io/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1326,8 +1338,7 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
+# Folders (see: http://doc.qt.io/qt-4.8/qthelpproject.html#virtual-folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1335,23 +1346,21 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_ATTRS  =
 
 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
 # project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# http://doc.qt.io/qt-4.8/qthelpproject.html#filter-attributes).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_SECT_FILTER_ATTRS  =
@@ -1444,7 +1453,7 @@ EXT_LINKS_IN_WINDOW    = NO
 
 FORMULA_FONTSIZE       = 10
 
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
 # generated for formulas are transparent PNGs. Transparent PNGs are not
 # supported properly for IE 6.0, but are supported on all modern browsers.
 #
@@ -1456,7 +1465,7 @@ FORMULA_FONTSIZE       = 10
 FORMULA_TRANSPARENT    = YES
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
+# https://www.mathjax.org) which uses client side Javascript for the rendering
 # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
 # installed or if you want to formulas look prettier in the HTML output. When
 # enabled you may also need to install MathJax separately and configure the path
@@ -1483,8 +1492,8 @@ MATHJAX_FORMAT         = HTML-CSS
 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
 # Content Delivery Network so you can quickly see the result without installing
 # MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# MathJax from https://www.mathjax.org before deployment.
+# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.2/.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
 MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
@@ -1545,7 +1554,7 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
+# Xapian (see: https://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1558,7 +1567,7 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Xapian (see: https://xapian.org/). See the section "External Indexing and
 # Searching" for details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
@@ -1745,7 +1754,7 @@ LATEX_SOURCE_CODE      = NO
 
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
 # bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
 # The default value is: plain.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -1928,9 +1937,9 @@ DOCBOOK_PROGRAMLISTING = NO
 #---------------------------------------------------------------------------
 
 # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
-# AutoGen Definitions (see http://autogen.sf.net) file that captures the
-# structure of the code including all documentation. Note that this feature is
-# still experimental and incomplete at the moment.
+# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
+# the structure of the code including all documentation. Note that this feature
+# is still experimental and incomplete at the moment.
 # The default value is: NO.
 
 GENERATE_AUTOGEN_DEF   = NO
diff --git a/ACE/etc/ace_qos.doxygen b/ACE/etc/ace_qos.doxygen
index 5e2a3117944..3c5be42bd7b 100644
--- a/ACE/etc/ace_qos.doxygen
+++ b/ACE/etc/ace_qos.doxygen
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.13
+# Doxyfile 1.8.14
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -20,8 +20,8 @@
 # This tag specifies the encoding used for all characters in the config file
 # that follow. The default is UTF-8 which is also the encoding used for all text
 # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
+# built into libc) for the transcoding. See
+# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
 # The default value is: UTF-8.
 
 DOXYFILE_ENCODING      = UTF-8
@@ -226,7 +226,8 @@ TAB_SIZE               = 8
 # will allow you to put the command \sideeffect (or @sideeffect) in the
 # documentation, which will result in a user-defined paragraph with heading
 # "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
+# newlines (in the resulting output). You can put ^^ in the value part of an
+# alias to insert a newline as if a physical newline was in the original file.
 
 ALIASES                =
 
@@ -327,7 +328,7 @@ BUILTIN_STL_SUPPORT    = YES
 CPP_CLI_SUPPORT        = NO
 
 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
 # will parse them like normal C++ but will assume all classes use public instead
 # of private inheritance when no explicit protection keyword is present.
 # The default value is: NO.
@@ -698,7 +699,7 @@ LAYOUT_FILE            =
 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
 # the reference definitions. This must be a list of .bib files. The .bib
 # extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
 # For LaTeX the style of the bibliography can be controlled using
 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
 # search path. See also \cite for info how to create references.
@@ -785,7 +786,7 @@ INPUT                  = ace/QoS
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
 # possible encodings.
 # The default value is: UTF-8.
 
@@ -993,7 +994,7 @@ SOURCE_TOOLTIPS        = YES
 # If the USE_HTAGS tag is set to YES then the references to source code will
 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
 # source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
+# (see https://www.gnu.org/software/global/global.html). You will need version
 # 4.8.6 or higher.
 #
 # To use it do the following:
@@ -1139,7 +1140,7 @@ HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the style sheet and background images according to
 # this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
 # purple, and 360 is red again.
 # Minimum value: 0, maximum value: 359, default value: 220.
@@ -1175,6 +1176,17 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
+# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
+# documentation will contain a main index with vertical navigation menus that
+# are dynamically created via Javascript. If disabled, the navigation index will
+# consists of multiple levels of tabs that are statically embedded in every HTML
+# page. Disable this option to support browsers that do not have Javascript,
+# like the Qt help browser.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_MENUS     = YES
+
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded.
@@ -1198,12 +1210,12 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# environment (see: https://developer.apple.com/tools/xcode/), introduced with
 # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
 # Makefile in the HTML output directory. Running make will produce the docset in
 # that directory and running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# startup. See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html
 # for more information.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1319,7 +1331,7 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# (see: http://doc.qt.io/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1327,8 +1339,7 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
+# Folders (see: http://doc.qt.io/qt-4.8/qthelpproject.html#virtual-folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1336,23 +1347,21 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_ATTRS  =
 
 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
 # project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# http://doc.qt.io/qt-4.8/qthelpproject.html#filter-attributes).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_SECT_FILTER_ATTRS  =
@@ -1445,7 +1454,7 @@ EXT_LINKS_IN_WINDOW    = NO
 
 FORMULA_FONTSIZE       = 10
 
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
 # generated for formulas are transparent PNGs. Transparent PNGs are not
 # supported properly for IE 6.0, but are supported on all modern browsers.
 #
@@ -1457,7 +1466,7 @@ FORMULA_FONTSIZE       = 10
 FORMULA_TRANSPARENT    = YES
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
+# https://www.mathjax.org) which uses client side Javascript for the rendering
 # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
 # installed or if you want to formulas look prettier in the HTML output. When
 # enabled you may also need to install MathJax separately and configure the path
@@ -1484,8 +1493,8 @@ MATHJAX_FORMAT         = HTML-CSS
 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
 # Content Delivery Network so you can quickly see the result without installing
 # MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# MathJax from https://www.mathjax.org before deployment.
+# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.2/.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
 MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
@@ -1546,7 +1555,7 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
+# Xapian (see: https://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1559,7 +1568,7 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Xapian (see: https://xapian.org/). See the section "External Indexing and
 # Searching" for details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
@@ -1746,7 +1755,7 @@ LATEX_SOURCE_CODE      = NO
 
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
 # bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
 # The default value is: plain.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -1929,9 +1938,9 @@ DOCBOOK_PROGRAMLISTING = NO
 #---------------------------------------------------------------------------
 
 # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
-# AutoGen Definitions (see http://autogen.sf.net) file that captures the
-# structure of the code including all documentation. Note that this feature is
-# still experimental and incomplete at the moment.
+# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
+# the structure of the code including all documentation. Note that this feature
+# is still experimental and incomplete at the moment.
 # The default value is: NO.
 
 GENERATE_AUTOGEN_DEF   = NO
diff --git a/ACE/etc/ace_rmcast.doxygen b/ACE/etc/ace_rmcast.doxygen
index 465bdf15af3..3bcc6183894 100644
--- a/ACE/etc/ace_rmcast.doxygen
+++ b/ACE/etc/ace_rmcast.doxygen
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.13
+# Doxyfile 1.8.14
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -20,8 +20,8 @@
 # This tag specifies the encoding used for all characters in the config file
 # that follow. The default is UTF-8 which is also the encoding used for all text
 # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
+# built into libc) for the transcoding. See
+# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
 # The default value is: UTF-8.
 
 DOXYFILE_ENCODING      = UTF-8
@@ -226,7 +226,8 @@ TAB_SIZE               = 8
 # will allow you to put the command \sideeffect (or @sideeffect) in the
 # documentation, which will result in a user-defined paragraph with heading
 # "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
+# newlines (in the resulting output). You can put ^^ in the value part of an
+# alias to insert a newline as if a physical newline was in the original file.
 
 ALIASES                =
 
@@ -327,7 +328,7 @@ BUILTIN_STL_SUPPORT    = YES
 CPP_CLI_SUPPORT        = NO
 
 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
 # will parse them like normal C++ but will assume all classes use public instead
 # of private inheritance when no explicit protection keyword is present.
 # The default value is: NO.
@@ -698,7 +699,7 @@ LAYOUT_FILE            =
 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
 # the reference definitions. This must be a list of .bib files. The .bib
 # extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
 # For LaTeX the style of the bibliography can be controlled using
 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
 # search path. See also \cite for info how to create references.
@@ -785,7 +786,7 @@ INPUT                  = protocols/ace/RMCast
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
 # possible encodings.
 # The default value is: UTF-8.
 
@@ -993,7 +994,7 @@ SOURCE_TOOLTIPS        = YES
 # If the USE_HTAGS tag is set to YES then the references to source code will
 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
 # source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
+# (see https://www.gnu.org/software/global/global.html). You will need version
 # 4.8.6 or higher.
 #
 # To use it do the following:
@@ -1138,7 +1139,7 @@ HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the style sheet and background images according to
 # this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
 # purple, and 360 is red again.
 # Minimum value: 0, maximum value: 359, default value: 220.
@@ -1174,6 +1175,17 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
+# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
+# documentation will contain a main index with vertical navigation menus that
+# are dynamically created via Javascript. If disabled, the navigation index will
+# consists of multiple levels of tabs that are statically embedded in every HTML
+# page. Disable this option to support browsers that do not have Javascript,
+# like the Qt help browser.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_MENUS     = YES
+
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded.
@@ -1197,12 +1209,12 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# environment (see: https://developer.apple.com/tools/xcode/), introduced with
 # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
 # Makefile in the HTML output directory. Running make will produce the docset in
 # that directory and running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# startup. See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html
 # for more information.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1318,7 +1330,7 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# (see: http://doc.qt.io/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1326,8 +1338,7 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
+# Folders (see: http://doc.qt.io/qt-4.8/qthelpproject.html#virtual-folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1335,23 +1346,21 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_ATTRS  =
 
 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
 # project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# http://doc.qt.io/qt-4.8/qthelpproject.html#filter-attributes).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_SECT_FILTER_ATTRS  =
@@ -1444,7 +1453,7 @@ EXT_LINKS_IN_WINDOW    = NO
 
 FORMULA_FONTSIZE       = 10
 
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
 # generated for formulas are transparent PNGs. Transparent PNGs are not
 # supported properly for IE 6.0, but are supported on all modern browsers.
 #
@@ -1456,7 +1465,7 @@ FORMULA_FONTSIZE       = 10
 FORMULA_TRANSPARENT    = YES
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
+# https://www.mathjax.org) which uses client side Javascript for the rendering
 # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
 # installed or if you want to formulas look prettier in the HTML output. When
 # enabled you may also need to install MathJax separately and configure the path
@@ -1483,8 +1492,8 @@ MATHJAX_FORMAT         = HTML-CSS
 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
 # Content Delivery Network so you can quickly see the result without installing
 # MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# MathJax from https://www.mathjax.org before deployment.
+# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.2/.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
 MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
@@ -1545,7 +1554,7 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
+# Xapian (see: https://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1558,7 +1567,7 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Xapian (see: https://xapian.org/). See the section "External Indexing and
 # Searching" for details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
@@ -1745,7 +1754,7 @@ LATEX_SOURCE_CODE      = NO
 
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
 # bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
 # The default value is: plain.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -1928,9 +1937,9 @@ DOCBOOK_PROGRAMLISTING = NO
 #---------------------------------------------------------------------------
 
 # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
-# AutoGen Definitions (see http://autogen.sf.net) file that captures the
-# structure of the code including all documentation. Note that this feature is
-# still experimental and incomplete at the moment.
+# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
+# the structure of the code including all documentation. Note that this feature
+# is still experimental and incomplete at the moment.
 # The default value is: NO.
 
 GENERATE_AUTOGEN_DEF   = NO
diff --git a/ACE/etc/ace_ssl.doxygen b/ACE/etc/ace_ssl.doxygen
index 0d8b5ea88f6..3b39c30c21b 100644
--- a/ACE/etc/ace_ssl.doxygen
+++ b/ACE/etc/ace_ssl.doxygen
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.13
+# Doxyfile 1.8.14
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -20,8 +20,8 @@
 # This tag specifies the encoding used for all characters in the config file
 # that follow. The default is UTF-8 which is also the encoding used for all text
 # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
+# built into libc) for the transcoding. See
+# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
 # The default value is: UTF-8.
 
 DOXYFILE_ENCODING      = UTF-8
@@ -226,7 +226,8 @@ TAB_SIZE               = 8
 # will allow you to put the command \sideeffect (or @sideeffect) in the
 # documentation, which will result in a user-defined paragraph with heading
 # "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
+# newlines (in the resulting output). You can put ^^ in the value part of an
+# alias to insert a newline as if a physical newline was in the original file.
 
 ALIASES                =
 
@@ -327,7 +328,7 @@ BUILTIN_STL_SUPPORT    = YES
 CPP_CLI_SUPPORT        = NO
 
 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
 # will parse them like normal C++ but will assume all classes use public instead
 # of private inheritance when no explicit protection keyword is present.
 # The default value is: NO.
@@ -698,7 +699,7 @@ LAYOUT_FILE            =
 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
 # the reference definitions. This must be a list of .bib files. The .bib
 # extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
 # For LaTeX the style of the bibliography can be controlled using
 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
 # search path. See also \cite for info how to create references.
@@ -785,7 +786,7 @@ INPUT                  = ace/SSL
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
 # possible encodings.
 # The default value is: UTF-8.
 
@@ -993,7 +994,7 @@ SOURCE_TOOLTIPS        = YES
 # If the USE_HTAGS tag is set to YES then the references to source code will
 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
 # source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
+# (see https://www.gnu.org/software/global/global.html). You will need version
 # 4.8.6 or higher.
 #
 # To use it do the following:
@@ -1138,7 +1139,7 @@ HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the style sheet and background images according to
 # this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
 # purple, and 360 is red again.
 # Minimum value: 0, maximum value: 359, default value: 220.
@@ -1174,6 +1175,17 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
+# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
+# documentation will contain a main index with vertical navigation menus that
+# are dynamically created via Javascript. If disabled, the navigation index will
+# consists of multiple levels of tabs that are statically embedded in every HTML
+# page. Disable this option to support browsers that do not have Javascript,
+# like the Qt help browser.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_MENUS     = YES
+
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded.
@@ -1197,12 +1209,12 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# environment (see: https://developer.apple.com/tools/xcode/), introduced with
 # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
 # Makefile in the HTML output directory. Running make will produce the docset in
 # that directory and running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# startup. See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html
 # for more information.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1318,7 +1330,7 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# (see: http://doc.qt.io/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1326,8 +1338,7 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
+# Folders (see: http://doc.qt.io/qt-4.8/qthelpproject.html#virtual-folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1335,23 +1346,21 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_ATTRS  =
 
 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
 # project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# http://doc.qt.io/qt-4.8/qthelpproject.html#filter-attributes).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_SECT_FILTER_ATTRS  =
@@ -1444,7 +1453,7 @@ EXT_LINKS_IN_WINDOW    = NO
 
 FORMULA_FONTSIZE       = 10
 
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
 # generated for formulas are transparent PNGs. Transparent PNGs are not
 # supported properly for IE 6.0, but are supported on all modern browsers.
 #
@@ -1456,7 +1465,7 @@ FORMULA_FONTSIZE       = 10
 FORMULA_TRANSPARENT    = YES
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
+# https://www.mathjax.org) which uses client side Javascript for the rendering
 # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
 # installed or if you want to formulas look prettier in the HTML output. When
 # enabled you may also need to install MathJax separately and configure the path
@@ -1483,8 +1492,8 @@ MATHJAX_FORMAT         = HTML-CSS
 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
 # Content Delivery Network so you can quickly see the result without installing
 # MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# MathJax from https://www.mathjax.org before deployment.
+# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.2/.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
 MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
@@ -1545,7 +1554,7 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
+# Xapian (see: https://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1558,7 +1567,7 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Xapian (see: https://xapian.org/). See the section "External Indexing and
 # Searching" for details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
@@ -1745,7 +1754,7 @@ LATEX_SOURCE_CODE      = NO
 
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
 # bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
 # The default value is: plain.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -1928,9 +1937,9 @@ DOCBOOK_PROGRAMLISTING = NO
 #---------------------------------------------------------------------------
 
 # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
-# AutoGen Definitions (see http://autogen.sf.net) file that captures the
-# structure of the code including all documentation. Note that this feature is
-# still experimental and incomplete at the moment.
+# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
+# the structure of the code including all documentation. Note that this feature
+# is still experimental and incomplete at the moment.
 # The default value is: NO.
 
 GENERATE_AUTOGEN_DEF   = NO
diff --git a/ACE/etc/acexml.doxygen b/ACE/etc/acexml.doxygen
index e160cf550df..1ad03159246 100644
--- a/ACE/etc/acexml.doxygen
+++ b/ACE/etc/acexml.doxygen
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.13
+# Doxyfile 1.8.14
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -20,8 +20,8 @@
 # This tag specifies the encoding used for all characters in the config file
 # that follow. The default is UTF-8 which is also the encoding used for all text
 # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
+# built into libc) for the transcoding. See
+# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
 # The default value is: UTF-8.
 
 DOXYFILE_ENCODING      = UTF-8
@@ -226,7 +226,8 @@ TAB_SIZE               = 8
 # will allow you to put the command \sideeffect (or @sideeffect) in the
 # documentation, which will result in a user-defined paragraph with heading
 # "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
+# newlines (in the resulting output). You can put ^^ in the value part of an
+# alias to insert a newline as if a physical newline was in the original file.
 
 ALIASES                =
 
@@ -327,7 +328,7 @@ BUILTIN_STL_SUPPORT    = YES
 CPP_CLI_SUPPORT        = NO
 
 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
 # will parse them like normal C++ but will assume all classes use public instead
 # of private inheritance when no explicit protection keyword is present.
 # The default value is: NO.
@@ -698,7 +699,7 @@ LAYOUT_FILE            =
 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
 # the reference definitions. This must be a list of .bib files. The .bib
 # extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
 # For LaTeX the style of the bibliography can be controlled using
 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
 # search path. See also \cite for info how to create references.
@@ -785,7 +786,7 @@ INPUT                  = ACEXML
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
 # possible encodings.
 # The default value is: UTF-8.
 
@@ -994,7 +995,7 @@ SOURCE_TOOLTIPS        = YES
 # If the USE_HTAGS tag is set to YES then the references to source code will
 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
 # source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
+# (see https://www.gnu.org/software/global/global.html). You will need version
 # 4.8.6 or higher.
 #
 # To use it do the following:
@@ -1139,7 +1140,7 @@ HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the style sheet and background images according to
 # this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
 # purple, and 360 is red again.
 # Minimum value: 0, maximum value: 359, default value: 220.
@@ -1175,6 +1176,17 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
+# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
+# documentation will contain a main index with vertical navigation menus that
+# are dynamically created via Javascript. If disabled, the navigation index will
+# consists of multiple levels of tabs that are statically embedded in every HTML
+# page. Disable this option to support browsers that do not have Javascript,
+# like the Qt help browser.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_MENUS     = YES
+
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded.
@@ -1198,12 +1210,12 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# environment (see: https://developer.apple.com/tools/xcode/), introduced with
 # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
 # Makefile in the HTML output directory. Running make will produce the docset in
 # that directory and running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# startup. See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html
 # for more information.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1319,7 +1331,7 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# (see: http://doc.qt.io/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1327,8 +1339,7 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
+# Folders (see: http://doc.qt.io/qt-4.8/qthelpproject.html#virtual-folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1336,23 +1347,21 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_ATTRS  =
 
 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
 # project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# http://doc.qt.io/qt-4.8/qthelpproject.html#filter-attributes).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_SECT_FILTER_ATTRS  =
@@ -1445,7 +1454,7 @@ EXT_LINKS_IN_WINDOW    = NO
 
 FORMULA_FONTSIZE       = 10
 
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
 # generated for formulas are transparent PNGs. Transparent PNGs are not
 # supported properly for IE 6.0, but are supported on all modern browsers.
 #
@@ -1457,7 +1466,7 @@ FORMULA_FONTSIZE       = 10
 FORMULA_TRANSPARENT    = YES
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
+# https://www.mathjax.org) which uses client side Javascript for the rendering
 # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
 # installed or if you want to formulas look prettier in the HTML output. When
 # enabled you may also need to install MathJax separately and configure the path
@@ -1484,8 +1493,8 @@ MATHJAX_FORMAT         = HTML-CSS
 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
 # Content Delivery Network so you can quickly see the result without installing
 # MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# MathJax from https://www.mathjax.org before deployment.
+# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.2/.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
 MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
@@ -1546,7 +1555,7 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
+# Xapian (see: https://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1559,7 +1568,7 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Xapian (see: https://xapian.org/). See the section "External Indexing and
 # Searching" for details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
@@ -1746,7 +1755,7 @@ LATEX_SOURCE_CODE      = NO
 
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
 # bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
 # The default value is: plain.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -1929,9 +1938,9 @@ DOCBOOK_PROGRAMLISTING = NO
 #---------------------------------------------------------------------------
 
 # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
-# AutoGen Definitions (see http://autogen.sf.net) file that captures the
-# structure of the code including all documentation. Note that this feature is
-# still experimental and incomplete at the moment.
+# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
+# the structure of the code including all documentation. Note that this feature
+# is still experimental and incomplete at the moment.
 # The default value is: NO.
 
 GENERATE_AUTOGEN_DEF   = NO