pSOSim port

2 files changed, 622 insertions, 0 deletions

diff --git a/ace/config-psosim-g++.h b/ace/config-psosim-g++.h
new file mode 100644
index 00000000000..9285287665e
--- /dev/null
+++ b/ace/config-psosim-g++.h
@@ -0,0 +1,242 @@
+/* -*- C++ -*- */
+// $Id$
+
+// The following configuration file is designed to work for pSOSim on SunOS5
+// using the GNU/Cygnus g++ 2.7.2 compiler, without repo patch.
+
+///////////////////////////////////////////////////////////////////////////////
+// * IMPORTANT * IMPORTANT * IMPORTANT * IMPORTANT * IMPORTANT * IMPORTANT * //
+//                                                                           //
+//   Because pSOSim includes UNIX system header files in order to do         //
+//   its emulation of pSOSystSem on Solaris, there are a number of           //
+//   things that are "available" to ACE on pSOSim that are *not*             //
+//   really available on pSOSystem.  Every effort has been made to           //
+//   avoid dependencies on these "features" in the ACE pSOSim port,          //
+//   which has in turn necessarily required pSOSim specific definitions.     //
+//                                                                           //
+//   To ease portability between pSOSim and pSOSystem, the definitions       //
+//   in this file have been separated into three groups: those that          //
+//   are known to be appropriate for both pSOSim and  pSOSystem, those       //
+//   known to be appropriate for pSOSim but (probably) not for pSOSystem,    //
+//   and those that are (probably) appropriate for pSOSystem, but are        //
+//   not appropriate for pSOSim.                                             //
+//                                                                           //
+//   When porting from pSOSim to pSOSystem, it is (probably) a good          //
+//   idea to leave the definitions in the first category alone,              //
+//   comment out the definitions in the second category, and uncomment       //
+//   the definitions in the third category.  Additional definitions          //
+//   may need to be added to the third category, as only those that          //
+//   were encountered during the pSOSim port were added (that is, one        //
+//   of the system files included by pSOSim could be compensating for        //
+//   a definition pSOSystem really needs.                                    //
+//                                                                           //
+// * IMPORTANT * IMPORTANT * IMPORTANT * IMPORTANT * IMPORTANT * IMPORTANT * //
+///////////////////////////////////////////////////////////////////////////////
+
+
+#if !defined (ACE_CONFIG_H)
+#define ACE_CONFIG_H
+
+////////////////////////////////////////////////////////////////
+//                                                            //
+//   Definitions appropriate for both pSOSim and pSOSystem    //
+//                                                            //
+////////////////////////////////////////////////////////////////
+
+#if ! defined (__ACE_INLINE__)
+# define __ACE_INLINE__
+#endif /* ! __ACE_INLINE__ */
+
+
+#define ACE_HAS_IP_MULTICAST
+
+#define ACE_HAS_CPLUSPLUS_HEADERS
+
+/* #define ACE_HAS_MINIMUM_IOSTREAMH_INCLUSION */
+
+// #define ACE_LACKS_U_LONG_LONG
+
+#define ACE_LACKS_HRTIME_T
+
+// #define ACE_LACKS_EVENT_T
+
+#define ACE_HAS_VERBOSE_NOTSUP
+
+#define ACE_LACKS_MEMORY_H
+
+#define ACE_LACKS_MALLOC_H
+
+#define ACE_LACKS_MMAP
+
+#define ACE_LACKS_UNIX_DOMAIN_SOCKETS
+
+#define ACE_HAS_NONSTATIC_OBJECT_MANAGER
+
+#define ACE_LACKS_SEMBUF_T
+
+#define ACE_LACKS_EXEC
+
+#define ACE_LACKS_FORK
+
+
+// rename the main entry point
+#define ACE_MAIN extern "C" void root
+
+// All this is commented out for the single threaded port
+/*
+
+#define ACE_HAS_THREADS
+
+#if !defined (ACE_MT_SAFE)
+# define ACE_MT_SAFE 1
+#endif                      
+
+#define ACE_DEFAULT_THREAD_KEYS 256
+
+#define ACE_HAS_MT_SAFE_SOCKETS
+
+#define ACE_LACKS_COND_T
+
+
+*/
+
+#define ACE_HAS_TSS_EMULATION 
+
+
+////////////////////////////////////////////////////////////////
+//                                                            //
+//   Definitions appropriate for pSOSim but not pSOSystem     //
+//                                                            //
+////////////////////////////////////////////////////////////////
+
+#define ACE_HAS_POSIX_TIME
+
+////////////////////////////////////////////////////////////////
+//                                                            //
+//   Definitions appropriate for pSOSystem but not pSOSim     //
+//                                                            //
+////////////////////////////////////////////////////////////////
+
+
+////////////////////////////////////////////////////////////////
+//                                                            //
+//   Definitions that have not been categorized               //
+//                                                            //
+////////////////////////////////////////////////////////////////
+
+
+#define ACE_LACKS_PTHREAD_THR_SIGSETMASK
+
+/* #define ACE_HAS_BROKEN_SENDMSG */
+
+/* #define ACE_HAS_BROKEN_WRITEV  */
+
+#define ACE_HAS_CHARPTR_SOCKOPT
+
+#define ACE_HAS_CONSISTENT_SIGNAL_PROTOTYPES
+
+#define ACE_HAS_HANDLE_SET_OPTIMIZED_FOR_SELECT
+
+#define ACE_HAS_MSG
+
+#define ACE_HAS_POSIX_NONBLOCK
+
+#define ACE_HAS_SIGINFO_T
+
+#define ACE_HAS_SIGWAIT
+
+#define ACE_HAS_SIG_ATOMIC_T
+
+#define ACE_HAS_STRERROR
+
+#define ACE_LACKS_ACCESS
+
+#define ACE_LACKS_GETSERVBYNAME
+
+#define ACE_LACKS_IOSTREAM_FX
+
+#define ACE_LACKS_KEY_T
+
+#define ACE_LACKS_LINEBUFFERED_STREAMBUF
+
+#define ACE_LACKS_MADVISE
+
+#define ACE_LACKS_MKTEMP
+
+#define ACE_LACKS_MPROTECT
+
+#define ACE_LACKS_MSYNC
+
+#define ACE_LACKS_PARAM_H
+
+#define ACE_LACKS_PWD_FUNCTIONS
+
+#define ACE_LACKS_RLIMIT
+
+#define ACE_LACKS_RPC_H
+
+#define ACE_LACKS_RWLOCK_T
+
+#define ACE_LACKS_SBRK
+
+#define ACE_LACKS_SIGINFO_H
+
+#define ACE_LACKS_SIGNED_CHAR
+
+#define ACE_LACKS_SI_ADDR
+
+#define ACE_LACKS_SOCKETPAIR
+
+#define ACE_LACKS_STRCASECMP
+
+#define ACE_LACKS_STRRECVFD
+
+#define ACE_LACKS_SYSCALL
+
+#define ACE_LACKS_SYSV_MSG_H
+
+#define ACE_LACKS_SYSV_SHMEM
+
+#define ACE_LACKS_SYS_NERR
+
+#define ACE_LACKS_TIMESPEC_T
+
+#define ACE_LACKS_UCONTEXT_H
+
+#define ACE_LACKS_UNIX_SIGNALS
+
+#define ACE_LACKS_UTSNAME_T
+
+// #define ACE_MALLOC_ALIGN 8
+// #define ACE_NEEDS_SYSTIME_H
+
+#define ACE_PAGE_SIZE 4096
+
+#define ACE_HAS_BROKEN_EXPLICIT_TEMPLATE_DESTRUCTOR
+
+#define ACE_HAS_EXPLICIT_TEMPLATE_INSTANTIATION
+
+#define ACE_HAS_TEMPLATE_SPECIALIZATION
+
+#define ACE_LACKS_STATIC_DATA_MEMBER_TEMPLATES
+
+#define ACE_TEMPLATES_REQUIRE_SOURCE
+
+#if !defined (ACE_NTRACE)
+# define ACE_NTRACE 1
+#endif /* ACE_NTRACE */
+
+#if !defined (ACE_PSOS)
+#define ACE_PSOS
+#endif /* ACE_PSOS */
+
+#if !defined (ACE_PSOSIM)
+#define ACE_PSOSIM
+#endif /* ACE_PSOSIM */
+
+#if !defined (ACE_PSOS_TBD)
+#define ACE_PSOS_TBD
+#endif /* ACE_PSOS_TBD */
+
+
+#endif /* ACE_CONFIG_H */
diff --git a/ace/sys_conf.h b/ace/sys_conf.h
new file mode 100644
index 00000000000..cbf778030bf
--- /dev/null
+++ b/ace/sys_conf.h
@@ -0,0 +1,380 @@
+/* ============================================================================ */
+/*                                                                              */
+/* -*- C++ -*-                                                                  */
+/* $Id$                       */
+/*                                                                              */
+/* ============================================================================ */
+/*                                                                              */
+/* = LIBRARY                                                                    */
+/*    ace                                                                       */
+/*                                                                              */
+/* = FILENAM                                                                    */
+/*    sys_conf.h  (definitions for pSOSim and pSOSystem configuration)          */
+/*                                                                              */
+/* = AUTHOR                                                                     */
+/*    Chris Gill                                                                */
+/*                                                                              */
+/* ============================================================================ */
+
+#ifndef _SYS_CONF_H
+#define _SYS_CONF_H
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/***********************************************************************/
+/*                                                                     */
+/*  These symbols are used to define other symbols in this file.       */
+/*  They should never be changed.                                      */
+/*                                                                     */
+/***********************************************************************/
+#define YES     1
+#define NO      0
+
+#define USE_RARP 0
+
+#define DBG_SA    1  /* Standalone pROBE debugging */
+#define DBG_XS    2  /* XRAY+ via RS-232 */
+#define DBG_XN    3  /* XRAY+ via network */
+#define DBG_AP    4  /* Run application (w/ pROBE in standalone mode) */
+
+#define STORAGE   5  /* Get SD_'s from storage area */
+#define SYS_CONF  6  /* Get SD_'s from #defines set in this file */
+
+
+/***********************************************************************/
+/*                                                                     */
+/*                 B A S I C   P A R A M E T E R S                     */
+/*                                                                     */
+/*  The parameters in this section determine the fashion in which      */
+/*  many of the other parameters in this file will be used.            */
+/*                                                                     */
+/*  Many of the parameters in this file have names beginning with      */
+/*  either "SC_" or "SD_".  Those beginning with "SC_" are ALWAYS      */
+/*  controlled by the values you set in this file.  The values of      */
+/*  the "SD_" parameters can be determined either by the definitions   */
+/*  given in this file, or by the data found in the target board's     */
+/*  parameter storage area.  SC_SD_PARAMETERS determines this.  If     */
+/*  SC_SD_PARAMETERS is "SYS_CONF", then the values given in this      */
+/*  file will be used for the SD_ parameters.  If SC_SD_PARAMETERS     */
+/*  is "STORAGE", then pSOSystem will attempt to use the values found  */
+/*  in the board's parameter storage area for the SD_ variables.  If   */
+/*  the parameter storage area has not been initialized or has been    */
+/*  corrupted, then the values given in this file will be used.  They  */
+/*  will also be written to the storage area.                          */
+/*                                                                     */
+/*  If SC_SD_PARAMETERS is STORAGE, you may enable a "startup dialog"  */
+/*  which will allow you to view, and optionally change, the           */
+/*  parameter values found in the storage area.  The dialog is enabled */
+/*  by setting SC_STARTUP_DIALOG to YES.  In this case,                */
+/*  SD_STARTUP_DELAY specifies the number of seconds that the dialog   */
+/*  will wait for input before proceeding to boot the system.          */
+/*                                                                     */
+/*  SE_DEBUG_MODE determines how the system will operate, as follows:  */
+/*                                                                     */
+/*     DBG_SA: Boot pROBE+ in standalone mode.                         */
+/*                                                                     */
+/*     DBG_XS: Boot into pROBE+ and wait for the host debugger (XRAY+) */
+/*             via a serial connection                                 */
+/*                                                                     */
+/*     DBG_XN: Boot into pROBE+ and wait for the host debugger (XRAY+) */
+/*             via a network connection                                */
+/*                                                                     */
+/*     STORAGE: Use the mode (DBG_SA, DBG_XS, or DBG_XN) found in the  */
+/*              parameter storage area.  If a valid mode is not found, */
+/*              then use DBG_SA.                                       */
+/*                                                                     */
+/***********************************************************************/
+#define SC_SD_PARAMETERS    STORAGE
+#define SC_STARTUP_DIALOG   NO
+#define SD_STARTUP_DELAY    60
+#define SE_DEBUG_MODE       STORAGE
+
+/***********************************************************************/
+/*                                                                     */
+/*        O P E R A T I N G   S Y S T E M   C O M P O N E N T S        */
+/*                                                                     */
+/*  Setting the definition line to YES will cause that component to    */
+/*  be built into the system.  NO means the component will NOT be      */
+/*  put into the system.  It is an error to specify both SC_PSOS       */
+/*  and SC_PSOSM as present!                                           */
+/*                                                                     */
+/***********************************************************************/
+#define SC_PSOS             YES  /* pSOS+ real-time kernel */
+#define SC_PSOSM            NO   /* pSOS+ real-time multiprocessing kernel */
+#define SC_PROBE            YES   /* pROBE+ system-level debugger */
+#define SC_PHILE            NO   /* pHILE+ file system manager */
+#define SC_PREPC            YES  /* pREPC+ C run-time library */
+#define SC_PNA              YES   /* pNA+ TCP/IP networking manager */
+#define SC_PRPC             NO   /* pRPC+ RPC component */
+#define SC_PX               NO   /* pX+ X-windows client */
+#define SC_PSE              NO   /* pSE+ STREAMS component */
+#define SC_PTLI             NO   /* pTLI TLI component */
+
+
+/***********************************************************************/
+/*                                                                     */
+/*      S E R I A L   C H A N N E L   C O N F I G U R A T I O N        */
+/*                                                                     */
+/*  * SC_DEF_BAUD specifies the default baud rate to be used for       */
+/*    the serial channels                                              */
+/*  * SC_APP_CONSOLE specifies the serial channel number (starting     */
+/*    from 1) which should be used for the application's "console".    */
+/*  * SC_PROBE_CONSOLE specifies the serial channel number (starting   */
+/*    from 1) which pROBE+ should use to display output and receive    */
+/*    commands, or to communicate with XRAY+ over.                     */
+/*  * SC_PROBE_HOST specifies the serial channel number (starting      */
+/*    from 1) which should be used for the pROBE+ "host" channel.      */
+/*    This is not normally required, so it can be disabled by          */
+/*    using a value of 0.  The host channel is explained in the        */
+/*    pROBE+ User's Manual.                                            */
+/*                                                                     */
+/***********************************************************************/
+#define SD_DEF_BAUD           9600
+#define SC_APP_CONSOLE        1
+#define SC_PROBE_CONSOLE      1
+#define SC_PROBE_HOST         0
+
+
+/***********************************************************************/
+/*                                                                     */
+/*              L A N   C O N F I G U R A T I O N                      */
+/*                                                                     */
+/*                                                                     */
+/***********************************************************************/
+#define SD_LAN1               YES
+#define SD_LAN1_IP            0x80FCA58C
+#define SD_LAN1_SUBNET_MASK   0
+#define SC_LAN1_BUFFS         40
+
+/***********************************************************************/
+/*                                                                     */
+/*      S H A R E D   M E M O R Y   C O N F I G U R A T I O N          */
+/*                                                                     */
+/*                                                                     */
+/***********************************************************************/
+/*---------------------------------------------------------------------*/
+/* If you want to build a Shared Memory Interface for the network or   */
+/* multi-processing pSOS+m, set SD_SM_NODE (a non-zero value) to the   */
+/* node number of THIS node.                                           */
+/*---------------------------------------------------------------------*/
+#define SD_SM_NODE            0
+
+/*---------------------------------------------------------------------*/
+/* Shared memory network interface                                     */
+/*---------------------------------------------------------------------*/
+#define SD_NISM               NO
+#define SD_NISM_IP            0x00000000
+#define SD_NISM_DIRADDR       0x300000
+#define SC_NISM_BUFFS         30
+#define SC_NISM_LEVEL         2
+#define SD_NISM_SUBNET_MASK   0
+
+
+/*---------------------------------------------------------------------*/
+/* If you want to build a multi-node pSOS+m system, set SD_KISM        */
+/* to the number of nodes in the system.                               */
+/*---------------------------------------------------------------------*/
+#define SD_KISM               NO
+#define SD_KISM_DIRADDR       0x1000400
+
+
+/***********************************************************************/
+/*                                                                     */
+/*         M I S C E L L A N E O U S   N E T W O R K I N G             */
+/*                       P A R A M E T E R S                           */
+/*                                                                     */
+/***********************************************************************/
+#define SD_DEF_GTWY_IP        0
+
+
+/***********************************************************************/
+/*                                                                     */
+/*                B U S   C O N F I G U R A T I O N                    */
+/*                                                                     */
+/*                                                                     */
+/***********************************************************************/
+#define SD_VME_BASE_ADDR      0x01000000
+
+
+/***********************************************************************/
+/* SC_RAM_SIZE                                                         */
+/*                                                                     */
+/* Normally, pSOSystem uses ALL of the memory remaining on a board     */
+/* for dynamic allocation ("region 0").  You may override this by      */
+/* setting SC_RAM_SIZE to a non-zero value.  If you do, pSOSystem will */
+/* not touch any memory after address (BSP_RAM_BASE + SC_RAM_SIZE - 1).*/
+/*                                                                     */
+/* NOTE: This is usefull when the building a BOOT ROM you and want to  */
+/* make sure it does not "over flow" into the space you are putting    */
+/* the download code.                                                  */
+/***********************************************************************/
+#define SC_RAM_SIZE           0x800000
+
+/***********************************************************************/
+/*                                                                     */
+/*                     I / O   D E V I C E S                           */
+/*                                                                     */
+/*  Each device may be included in the system by specifying a major    */
+/*  number for it, which determines its slot in the pSOS+ I/O switch   */
+/*  table.  To leave a device driver out of the system, use NO for     */
+/*  the major number.                                                  */
+/*                                                                     */
+/*  Note the following:                                                */
+/*    * Major device 0 is reserved and cannot be used for any of these */
+/*      devices.  Setting a device number to 0 here is the same as NO. */
+/*    * No device number may be higher than SC_DEVMAX (SC_DEVMAX may   */
+/*      be increased, if desired)                                      */
+/*    * The lines defining the symbols DEV_SERIAL, DEV_TIMER, etc,     */
+/*      should not be changed.  These are for use by application       */
+/*      programs as the "device number" parameter on de_* calls.       */
+/*                                                                     */
+/***********************************************************************/
+#define SC_DEV_SERIAL      1            /* Serial driver */
+#define SC_DEV_TIMER       2            /* Periodic tick timer */
+#define SC_DEV_RAMDISK     NO           /* RAM disk */
+#define SC_DEV_TFTP        NO           /* TFTP pseudo driver */
+#define SC_DEV_SCSI        NO           /* SCSI bus */
+#define SC_DEV_DLPI        NO
+#define SC_DEVMAX          6            /* Maximum device number */
+
+#define DEV_SERIAL    (SC_DEV_SERIAL << 16)
+#define DEV_TIMER     (SC_DEV_TIMER << 16)
+#define DEV_RAMDISK   (SC_DEV_RAMDISK << 16)
+#define DEV_SCSI      (SC_DEV_SCSI << 16)
+#define DEV_TFTP      (SC_DEV_TFTP << 16)
+#define DEV_DLPI      (SC_DEV_DLPI << 16)
+
+/***********************************************************************/
+/*                                                                     */
+/* C O M P O N E N T   C O N F I G U R A T I O N   P A R A M E T E R S */
+/*                                                                     */
+/*  These parameters should work as is for this application.  You      */
+/*  may want to change some of them if you start customizing this      */
+/*  application.                                                       */
+/*                                                                     */
+/***********************************************************************/
+
+/*---------------------------------------------------------------------*/
+/* pSOS+ configuration parameters                                      */
+/*---------------------------------------------------------------------*/
+#define KC_RN0USIZE    0x100    /* region 0 unit size */
+#define KC_NTASK       12       /* max number of tasks */
+#define KC_NQUEUE      10       /* max number of message queues */
+#define KC_NSEMA4      30       /* max number of semaphores */
+#define KC_NMSGBUF     100      /* max number of message buffers */
+#define KC_NTIMER      10       /* max number of timers */
+#define KC_NLOCOBJ     50       /* max number of local objects */
+
+/* note: because pSOSim *simulates* a realtime clock, this value is set     */
+/*       very low to avoid crazy skew between the simulated and real worlds */
+#define KC_TICKS2SEC   1000000  /* clock tick interrupt frequency */
+
+#define KC_TICKS2SLICE 10       /* time slice quantum, in ticks */
+#define KC_SYSSTK      0xFFFF   /* pSOS+ system stack size (bytes) */
+#define KC_ROOTSSTK    0xFFFF   /* ROOT supervisor stack size */
+#define KC_ROOTUSTK    0        /* ROOT user stack size */
+#define KC_ROOTMODE    0x2000   /* ROOT initial mode */
+#define KC_STARTCO     0        /* callout at task activation */
+#define KC_DELETECO    0        /* callout at task deletion */
+#define KC_SWITCHCO    0        /* callout at task switch */
+#define KC_FATAL       0        /* fatal error handler address */
+
+
+/*---------------------------------------------------------------------*/
+/* pSOS+m configuration parameters                                     */
+/*---------------------------------------------------------------------*/
+
+#define MC_NGLBOBJ      8       /* sizeof global obj table in each node*/
+#define MC_NAGENT      10       /* number of RPC agents in this node */
+#define MC_FLAGS        0       /* operating mode flags */
+#define MC_ROSTER       0       /* addr of user roster change callout */
+#define MC_KIMAXBUF   100       /* maximum KI packet buffer length */
+#define MC_ASYNCERR     0       /* asynchronous calls error callout */
+
+/*---------------------------------------------------------------------*/
+/* pROBE+ configuration parameters                                     */
+/*---------------------------------------------------------------------*/
+#define RC_BRKOPC      0x4E40   /* Instruction break opcode */
+#define RC_ILEVEL      MAX_ILEV /* pROBE+ interrupt mask */
+#define RC_SMODE       0        /* Start mode */
+#define RC_FLAGS       0x0C     /* Initial flag settings */
+
+/*---------------------------------------------------------------------*/
+/* pHILE+ configuration parameters                                     */
+/*---------------------------------------------------------------------*/
+#define FC_LOGBSIZE    9        /* Block size (base-2 exponent) */
+#define FC_NBUF        6        /* Number of cache buffers */
+#define FC_NMOUNT      3        /* Max # of mounted volumes */
+#define FC_NFCB        10       /* Max # of opened files per system */
+#define FC_NCFILE      2        /* Max # of opened files per task */
+#define FC_MSDOS       1        /* MS-DOS volume mount flag */
+
+/*---------------------------------------------------------------------*/
+/* pREPC+ configuration parameters                                     */
+/*---------------------------------------------------------------------*/
+#define LC_BUFSIZ      128      /* I/O buffer size */
+#define LC_NUMFILES    50       /* Max number of open files per task */
+#define LC_WAITOPT     0        /* Wait option for memory allocation */
+#define LC_TIMEOPT     0        /* Timeout option for mem allocation */
+#define LC_SSIZE       512      /* Size of print buffer */
+
+/*---------------------------------------------------------------------*/
+/* pNA+ configuration parameters                                       */
+/*---------------------------------------------------------------------*/
+#define NC_NNI         5        /* size of pNA NI Table */
+#define NC_NROUTE      10       /* size of pNA Routing Table */
+#define NC_NARP        20       /* size of pNA ARP table */
+#define NC_DEFUID      0        /* Default User ID of a task */
+#define NC_DEFGID      0        /* Default Group ID of a task */
+#define NC_HOSTNAME    "scg"    /* Hostname of the node */
+#define NC_NHENTRY     8        /* Number of Host table entries */
+
+/*---------------------------------------------------------------------*/
+/* pSE+ configuration parameters                                       */
+/*---------------------------------------------------------------------*/
+#define NBUFS_0     64          /* number of 0 length buffers */
+#define NBUFS_32    128         /* number of 32 byte buffers */
+#define NBUFS_64    128         /* number of 64 byte buffers */
+#define NBUFS_128   256         /* number of 128 byte buffers */
+#define NBUFS_256   32          /* number of 256 byte buffers */
+#define NBUFS_512   32          /* number of 512 byte buffers */
+#define NBUFS_1024  16          /* number of 1k byte buffers */
+#define NBUFS_2048  16          /* number of 2k byte buffers */
+#define NBUFS_4096  8           /* number of 4k byte buffers */
+#define SE_MAX_PSE_STRBUFS  9   /* max number of stream buffer types */
+
+#define SE_MAX_PSE_MODULES 2    /* max number of streams modules */
+#define SC_SHARE_NI   NO        /* does pna share NI with streams? */
+
+#define SE_DATA_SIZE 0x0C00     /* size of pSE data area */
+                                /* (must be at least 3K) */
+#define SE_TASK_PRIO  250       /* priority for pSE task */
+#define SE_STACK_SIZE 0x2000    /* stack size for pSE task */
+#define SE_DEF_UID    0         /* default user id */
+#define SE_DEF_GID    0         /* default group id */
+#define SE_N_FDS      32        /* max # of system-wide */
+                                /*  stream descriptors */
+#define SE_N_TASKFDS  8         /* max # of per-task stream */
+                                /*  descriptors */
+#define SE_N_LINKS    32        /* max # of multiplexing links */
+#define SE_N_TIMEOUTS 32        /* max # of timeout requests */
+#define SE_N_BUFCALLS 32        /* max # of bufcall requests */
+#define SE_N_QUEUES   256       /* # of queues */
+#define SE_N_MBLKS    512       /* reserved for future use, must be 0 */
+
+/***********************************************************************/
+/*                                                                     */
+/*  This defines the IP address of the host system where the           */
+/*  "server" program should be running.                                */
+/*                                                                     */
+/***********************************************************************/
+#define HOST_IP       0x80FCA58C 
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* _SYS_CONF_H */
+