diff options
Diffstat (limited to 'ACE/TAO/orbsvcs/tests/FT_App/run_test_fault_consumer.pl')
-rwxr-xr-x | ACE/TAO/orbsvcs/tests/FT_App/run_test_fault_consumer.pl | 412 |
1 files changed, 412 insertions, 0 deletions
diff --git a/ACE/TAO/orbsvcs/tests/FT_App/run_test_fault_consumer.pl b/ACE/TAO/orbsvcs/tests/FT_App/run_test_fault_consumer.pl new file mode 100755 index 00000000000..66329347408 --- /dev/null +++ b/ACE/TAO/orbsvcs/tests/FT_App/run_test_fault_consumer.pl @@ -0,0 +1,412 @@ +eval '(exit $?0)' && eval 'exec perl -S $0 ${1+"$@"}' + & eval 'exec perl -S $0 $argv:q' + if 0; + +# $Id$ +# -*- perl -*- + +# Purpose: +# To test the FaultConsumer +# +# Process being tested: +# Fault_Consumer +# implements FaultConsumer interface. +# Processes used in test: +# FT_Replica +# implements TestReplica interface. +# implements PullMonitorable. +# Fault_Detector +# implements FaultDetectorFactory interface +# implements PullMonitorable interface +# FT_Client +# client for TestReplica interface. +# client for PullMonitorable. +# Fault_Notifier +# implements the FaultNotifier interface. +# propagates fault reports to the FaultConsumer. +# +# Test Scenario (***Test: marks behavior being tested): +# Phase 1: +# Start two FT_Replicas +# FT_Replicas write TestReplica IORs (FR#1 and FR#2) to files +# Start the Fault_Detector +# Fault_Detector writes its IOR (FDF) to a file +# Start the Fault_Notifier +# Fault_Notifier writes its IOR (FN) to a file. +# Start the Fault_Consumer +# Subscribes to the Fault_Notifier for fault reports. +# Phase 2: +# Wait for IORs: FR#1, FR#2, FDF, and FN +# Start the StubAnalyzer giving it IORS: FR#1, FR#2 FDF, FN +# StubAnalyzer calls FDF to create a FaultDetector +# for each Replica. +# StubAnalyzer subscribes to Fault_Notifier +# StubAnalyzer writes dummy message(READY) to a file. +# Phase 3: +# Wait for READY +# Start FT_Client giving it IORS: FR#1 and FR#2. [1] +# FT_Client interacts with FR#1. +# FT_Client asks FR#1 to fault. It does so. +# FT_Client notices fault and switches to FR#2. [1] +# FD#1 notices fault and notifies Fault_Notifier +# FD#1 terminates +# ***Test: Fault_Notifier forwards notification to StubAnalyzer +# StubAnalyzer prints notification. +# FT_Client interacts with FR#2. +# FT_Client asks FR#2 to shut down. +# FT_Client shuts down. +# FD#2 notices FR2 is gone, interprets this +# as a fault, and sends notification to Fault_Notifier +# FD#2 terminates. +# ***Test: Fault_Notifier forwards notification to StubAnalyzer +# StubAnalyzer prints notification. +# Phase 4: shutting down. +# All FaultDetectors have terminated so the FaultDetectorFactory +# honors the "quit-on-idle" option on it's command line and exits. +# StubAnalyzer compares # fault notifications to # replicas. When +# they match, it "knows" that the test is over, so it shuts down. +# As it does so, it disconnects its fault consumers from the FaultNotifier. +# FaultNotifier notices the last fault consumer disconnecting and exits because +# the "quit-on-idle" option was specified on the command line. +# Phase 5: housekeeping +# Wait for all processes to terminate. +# Check termination status. +# Delete temp files. +# +# [1] Client mediated fault tolerance. These points will +# change when IOGR support is available. +use lib "$ENV{ACE_ROOT}/bin"; +use PerlACE::TestTarget; + +######################## +#command line options +#set defaults: +my($status) = 0; +my($verbose) = 0; # 1: report perl actions before executing them +my($debug_builds) = 0; # 0: use exes from Release directories +my($simulated) = 1; # 1: use "client simulated" fault tolerance + +# List of the proccess which must be killed before exit with error +@kill_list = (); + +sub add_to_kills{ + $goal = shift; + @kill_list = (@kill_list, $goal); +} +sub exit_and_kill{ + $status = shift; + foreach $goal (@kill_list){ + $goal->Kill (); $goal->TimedWait (1); + } + exit $status; +} + +foreach $i (@ARGV) { + if ($i eq "--debug_build"){ + $debug_builds = 1; + } + elsif ($i eq "--no_simulate"){ # reverse this once we have FT ORB support + $simulated = 0; + } + elsif ($i eq "-v"){ + $verbose += 1; + } +} + +my($build_directory) = "/Release"; +if ( $debug_builds ) { + $build_directory = ""; +} + +if ( $verbose > 1) { + print "verbose: $verbose\n"; + print "debug_builds: $debug_builds -> $build_directory\n"; + print "simulated: $simulated\n"; +} + + +my $ft_replica1 = PerlACE::TestTarget::create_target (1) || die "Create target 1 failed\n"; +my $ft_replica2 = PerlACE::TestTarget::create_target (2) || die "Create target 2 failed\n"; +my $fault_detector = PerlACE::TestTarget::create_target (3) || die "Create target 3 failed\n"; +my $fault_notifier = PerlACE::TestTarget::create_target (4) || die "Create target 4 failed\n"; +my $client = PerlACE::TestTarget::create_target (5) || die "Create target 5 failed\n"; +my $consumer = PerlACE::TestTarget::create_target (6) || die "Create target 6 failed\n"; + +#define temp files +my($factory1_ior) = "factory1.ior"; +my($factory2_ior) = "factory2.ior"; +my($replica1_ior) = "replica1.ior"; +my($replica2_ior) = "replica2.ior"; +my($replica1_iogr) = "replica1.iogr"; +my($detector_ior) = "detector.ior"; +my($notifier_ior) = "notifier.ior"; +my($client_data) = "persistent.dat"; +my($ready_file) = "ready.file"; + +# Files for ft_replica1 +my $ft_replica1_factory1_ior = $ft_replica1->LocalFile ($factory1_ior); +my $ft_replica1_replica1_ior = $ft_replica1->LocalFile ($replica1_ior); +my $ft_replica1_client_data = $ft_replica1->LocalFile ($client_data); + +$ft_replica1->DeleteFile ($factory1_ior); +$ft_replica1->DeleteFile ($replica1_ior); +$ft_replica1->DeleteFile ($client_data); + +# Files for ft_replica2 +my $ft_replica2_factory2_ior = $ft_replica2->LocalFile ($factory2_ior); +my $ft_replica2_replica2_ior = $ft_replica2->LocalFile ($replica2_ior); +my $ft_replica2_client_data = $ft_replica2->LocalFile ($client_data); + +$ft_replica2->DeleteFile ($factory2_ior); +$ft_replica2->DeleteFile ($replica2_ior); +$ft_replica2->DeleteFile ($client_data); + +# Files for fault_detector +my $fault_detector_ior = $fault_detector->LocalFile ($detector_ior); +$fault_detector->DeleteFile ($detector_ior); + +# Files for fault_notifier +my $fault_notifier_ior = $fault_notifier->LocalFile ($notifier_ior); +$fault_notifier->DeleteFile ($notifier_ior); + +# Files for consumer +my $consumer_notifier_ior = $consumer->LocalFile ($notifier_ior); +my $consumer_replica1_ior = $consumer->LocalFile ($replica1_ior); +my $consumer_replica2_ior = $consumer->LocalFile ($replica2_ior); +my $consumer_detector_ior = $consumer->LocalFile ($detector_ior); +my $consumer_ready_file = $consumer->LocalFile ($ready_file); + +$consumer->DeleteFile ($notifier_ior); +$consumer->DeleteFile ($replica1_ior); +$consumer->DeleteFile ($replica2_ior); +$consumer->DeleteFile ($detector_ior); + + +# Files for client +my $client_replica1_ior = $client->LocalFile ($replica1_ior); +my $client_replica2_ior = $client->LocalFile ($replica2_ior); +my $client_replica1_iogr = $client->LocalFile ($replica2_ior); + +$client->DeleteFile ($replica1_ior); +$client->DeleteFile ($replica2_ior); +$client->DeleteFile ($replica1_iogr); + +### Create process +$REP1 = $ft_replica1->CreateProcess (".$build_directory/ft_replica" , + "-o $ft_replica1_factory1_ior ". + "-f none -t $ft_replica1_replica1_ior " . + "-l loc1 -i type1 -q -p $ft_replica1_client_data"); + +$REP2 = $ft_replica2->CreateProcess (".$build_directory/ft_replica" , + "-o $ft_replica2_factory2_ior ". + "-f none -t $ft_replica2_replica2_ior " . + "-l loc2 -i type1 -q -p $ft_replica2_client_data"); + +$DET = $fault_detector->CreateProcess ("$ENV{'TAO_ROOT'}/orbsvcs/Fault_Detector" . + "$build_directory/Fault_Detector" , + "-r " . + "-o $fault_detector_ior -q"); + +$NOT = $fault_notifier->CreateProcess ("$ENV{'TAO_ROOT'}/orbsvcs/Fault_Notifier" . + "$build_directory/Fault_Notifier" , + "-r " . + "-o $fault_notifier_ior -q"); + +$CONS = $consumer->CreateProcess (".$build_directory/ft_fault_consumer", + "-o $consumer_ready_file " . + "-n file://consumer_notifier_ior " . + "-q -d file://$consumer_detector_ior " . + "-r file://$client_replica1_ior " . + "-r file://$client_replica2_ior"); + +my($CL) = $client->CreateProcess (".$build_directory/ft_client", + "-f file://$client_replica1_ior " . + "-f file://$client_replica2_ior " . + "-c testscript"); +if ($simulated){ + print "\nTEST: Preparing Client Mediated Fault Tolerance test.\n" if ($verbose); + $CL = $client->CreateProcess (".$build_directory/ft_client", + "-f file://$client_replica1_ior " . + "-f file://$client_replica2_ior " . + "-c testscript"); + +} +else{ + print "\nTEST: Preparing IOGR based test.\n" if ($verbose); + $CL = $client->CreateProcess (".$build_directory/ft_client", + "-f file://$client_replica1_iogr " . + "-c testscript"); +} + +print "TEST: starting replica1 ". $REP1->CommandLine . "\n" if ($verbose); +$REP1->Spawn (); + +add_to_kills ($REP1); + +print "TEST: waiting for replica 1's IOR\n" if ($verbose); +if ($ft_replica1->WaitForFileTimed ($replica1_ior, + $ft_replica1->ProcessStartWaitInterval()) == -1) { + print STDERR "ERROR: cannot find file <$ft_replica1_replica1_ior>\n"; + exit_and_kill (1); +} +# Get/Put $replica1_ior: consumer_replica1_ior $client_replica1_ior +if ($ft_replica1->GetFile ($replica1_ior) == -1) { + print STDERR "ERROR: cannot retrieve file <$ft_replica1_replica1_ior>\n"; + exit_and_kill (1); +} +if ($consumer->PutFile ($replica1_ior) == -1) { + print STDERR "ERROR: cannot set file <$consumer_replica1_ior>\n"; + exit_and_kill (1); +} +if ($client->PutFile ($replica1_ior) == -1) { + print STDERR "ERROR: cannot set file <$client_replica1_ior>\n"; + exit_and_kill (1); +} + +print "\nTEST: starting replica2 " . $REP2->CommandLine . "\n" if ($verbose); +$REP2->Spawn (); + +add_to_kills ($REP2); + +print "TEST: waiting for replica 2's IOR\n" if ($verbose); +if ($ft_replica2->WaitForFileTimed ($replica2_ior, + $ft_replica2->ProcessStartWaitInterval()) == -1) { + print STDERR "TEST ERROR: cannot find file <$ft_replica2_replica2_ior>\n"; + exit_and_kill (1); +} +# Get/Put $replica2_ior: consumer_replica2_ior $client_replica2_ior +if ($ft_replica2->GetFile ($replica2_ior) == -1) { + print STDERR "ERROR: cannot retrieve file <$ft_replica2_replica2_ior>\n"; + exit_and_kill (1); +} +if ($consumer->PutFile ($replica2_ior) == -1) { + print STDERR "ERROR: cannot set file <$consumer_replica2_ior>\n"; + exit_and_kill (1); +} +if ($client->PutFile ($replica2_ior) == -1) { + print STDERR "ERROR: cannot set file <$client_replica2_ior>\n"; + exit_and_kill (1); +} + +print "\nTEST: starting detector factory " . $DET->CommandLine . "\n" if ($verbose); +$DET->Spawn (); + +add_to_kills ($DET); + +print "TEST: waiting for detector's IOR\n" if ($verbose); +if ($fault_detector->WaitForFileTimed ($detector_ior, + $fault_detector->ProcessStartWaitInterval()) == -1) { + print STDERR "ERROR: cannot find file <$fault_detector_ior>\n"; + exit_and_kill (1); +} +# Get/Put $detector_ior: $consumer_detector_ior +if ($fault_detector->GetFile ($detector_ior) == -1) { + print STDERR "ERROR: cannot retrieve file <$fault_detector_ior>\n"; + exit_and_kill (1); +} +if ($consumer->PutFile ($detector_ior) == -1) { + print STDERR "ERROR: cannot set file <$consumer_detector_ior>\n"; + exit_and_kill (1); +} + +print "\nTEST: starting notifier " . $NOT->CommandLine . "\n" if ($verbose); +$NOT->Spawn (); + +add_to_kills ($NOT); + +print "TEST: waiting for notifier's IOR\n" if ($verbose); +if ($fault_notifier->WaitForFileTimed ($notifier_ior, + $fault_notifier->ProcessStartWaitInterval()) == -1) { + print STDERR "ERROR: cannot find file <$fault_notifier_ior>\n"; + exit_and_kill (1); +} +# Get/Put $notifier_ior: $consumer_notifier_ior +if ($fault_notifier->GetFile ($notifier_ior) == -1) { + print STDERR "ERROR: cannot retrieve file <$fault_notifier_ior>\n"; + exit_and_kill (1); +} +if ($consumer->PutFile ($notifier_ior) == -1) { + print STDERR "ERROR: cannot set file <$consumer_notifier_ior>\n"; + exit_and_kill (1); +} + +print "\nTEST: starting fault consumer " . $CONS->CommandLine . "\n" if ($verbose); +$CONS->Spawn (); + +print "TEST: waiting for READY.FILE from fault consumer\n" if ($verbose); +if ($consumer->WaitForFileTimed ($consumer_ready_file, + $consumer->ProcessStartWaitInterval()) == -1) { + print STDERR "ERROR: cannot find file <$fault_notifier_ior>\n"; + exit_and_kill (1); +} + +print "\nTEST: starting client " . $CL->CommandLine . "\n" if ($verbose); +$status = $CL->SpawnWaitKill ($client->ProcessStartWaitInterval() + 45); + +if ($status != 0) { + print STDERR "TEST ERROR: client returned $status\n"; + $status = 1; +} + +print "\nTEST: wait for replica 1.\n" if ($verbose); +$status_replica = $REP1->WaitKill ($ft_replica1->ProcessStopWaitInterval()); +if ($status_replica != 0) { + print STDERR "TEST ERROR: replica returned $status_replica\n"; + $status = 1; +} +print "\nTEST: wait for replica 2.\n" if ($verbose); +$status_replica = $REP2->WaitKill ($ft_replica2->ProcessStopWaitInterval()); +if ($status_replica != 0) { + print STDERR "TEST ERROR: replica returned $status_replica\n"; + $status = 1; +} +print "\nTEST: wait for detector factory to leave.\n" if ($verbose); +$status_det = $DET->WaitKill ($fault_detector->ProcessStopWaitInterval()); +if ($status_det != 0) { + print STDERR "TEST ERROR: detector returned $status_det\n"; + $status = 1; +} + +print "\nTEST: wait for notifier to leave.\n" if ($verbose); +$status_not = $NOT->WaitKill ($fault_notifier->ProcessStopWaitInterval()); +if ($status_not != 0) { + print STDERR "TEST ERROR: notifier returned $status_not\n"; + $status = 1; +} + +print "\nTEST: wait for fault consumer to leave.\n" if ($verbose); +$status_cons = $CONS->WaitKill ($consumer->ProcessStopWaitInterval()); +if ($status_cons != 0) { + print STDERR "TEST ERROR: notifier returned $status_cons\n"; + $status = 1; +} +print "\nTEST: releasing scratch files.\n" if ($verbose); + +# Files for ft_replica1 +$ft_replica1->DeleteFile ($factory1_ior); +$ft_replica1->DeleteFile ($replica1_ior); +$ft_replica1->DeleteFile ($client_data); + +# Files for ft_replica2 +$ft_replica2->DeleteFile ($factory2_ior); +$ft_replica2->DeleteFile ($replica2_ior); +$ft_replica2->DeleteFile ($client_data); + +# Files for fault_detector +$fault_detector->DeleteFile ($detector_ior); + +# Files for fault_notifier +$fault_notifier->DeleteFile ($notifier_ior); + +# Files for consumer +$consumer->DeleteFile ($notifier_ior); +$consumer->DeleteFile ($replica1_ior); +$consumer->DeleteFile ($replica2_ior); +$consumer->DeleteFile ($detector_ior); + +# Files for client +$client->DeleteFile ($replica1_ior); +$client->DeleteFile ($replica2_ior); +$client->DeleteFile ($replica1_iogr); + +exit $status; |