diff options
Diffstat (limited to 'ACE/ace/config-aix-5.x.h')
-rw-r--r-- | ACE/ace/config-aix-5.x.h | 320 |
1 files changed, 0 insertions, 320 deletions
diff --git a/ACE/ace/config-aix-5.x.h b/ACE/ace/config-aix-5.x.h deleted file mode 100644 index e8f610274b6..00000000000 --- a/ACE/ace/config-aix-5.x.h +++ /dev/null @@ -1,320 +0,0 @@ -// -// Config file for AIX 5.1 and higher. - -#ifndef ACE_CONFIG_AIX_5_X_H -#define ACE_CONFIG_AIX_5_X_H - -// This define is needed for building with Visual Age C++ 5 in incremental -// mode. In the batch mode build, platform_aix_ibm.GNU sets it. The incremental -// mode compiler won't be supported after ACE 5.3, so this will also go away -// in that timeframe, so don't worry about future AIX versions. -#if !defined (ACE_AIX_VERS) -# define ACE_AIX_VERS 501 -#endif - -// AIX 5.1 has AIO, but it doesn't have the same API as other POSIX -// systems, and the semantics of operations are a bit different. Will take -// some real work to get this going. -// AIX 5.2, however, has the POSIX API implemented. However, the libc functions -// to implement it aren't exported by default. You need to use smit to enable -// them. So, leave AIO disabled unless the user explicitly enables it. -// config-aix-4.x.h will set ACE_HAS_AIO_CALLS if config-posix.h senses the -// feature-test macros, so set up _ACE_DISABLE_AIO_CALLS_ if the user didn't -// set it. Then check for it after including config-aix-4.x.h and remove -// ACE_HAS_AIO_CALLS if so. -#if !defined (ACE_HAS_AIO_CALLS) -# define _ACE_DISABLE_AIO_CALLS_ -#endif - -// Both IBM and g++ compilers set _THREAD_SAFE if compiler is asked to compile -// threaded code (xlC_r, as opposed to xlC; and g++ -pthread) -#if !defined (ACE_MT_SAFE) || (ACE_MT_SAFE != 0) -# if defined (ACE_HAS_THREADS) -# undef ACE_HAS_THREADS -# endif -# if defined (_THREAD_SAFE) -# define ACE_HAS_THREADS 1 -// # else -// # define ACE_HAS_THREADS 0 -# endif /* _THREAD_SAFE */ -#endif /* !ACE_MT_SAFE || (ACE_MT_SAFE != 0) */ - -#if defined (__IBMCPP__) - // AIX xlC, IBM C/C++ compiler - //******************************************************************** - // - - // Compiler does this with a builtin - it's not in libc. - // Although ACE does have alloca() on this compiler/platform combination, - // it is disabled by default since it can be dangerous. Uncomment the - // following line if you ACE to use it. - //# define ACE_HAS_ALLOCA - - // Compiler supports the ssize_t typedef. -# define ACE_HAS_SSIZE_T - - // Keep an eye on this as the compiler and standards converge... -# define ACE_LACKS_LINEBUFFERED_STREAMBUF -# define ACE_LACKS_PRAGMA_ONCE - -# define ACE_EXPLICIT_TEMPLATE_DESTRUCTOR_TAKES_ARGS - // When using -qtempinc, we don't need to see template implementation - // source (though we do need a pragma to find the correct source file). - // However, without -qtempinc (either -qnotempinc or -qtemplateregistry) - // we do need to see the source. -# if defined (__TEMPINC__) -# if !defined ACE_TEMPLATES_REQUIRE_PRAGMA -# define ACE_TEMPLATES_REQUIRE_PRAGMA -# endif -# else -# if !defined (ACE_TEMPLATES_REQUIRE_SOURCE) -# define ACE_TEMPLATES_REQUIRE_SOURCE -# endif -# endif /* __TEMPINC__ */ - -# undef WIFEXITED -# undef WEXITSTATUS - -# define ACE_HAS_CUSTOM_EXPORT_MACROS -# define ACE_Proper_Export_Flag -# define ACE_Proper_Import_Flag - // There's no explicit import/export per-se, but to be sure that declared - // template code is exported, explicitly instantiate the class. -# define ACE_EXPORT_SINGLETON_DECLARE(SINGLETON_TYPE, CLASS, LOCK) template class SINGLETON_TYPE < CLASS, LOCK >; -# define ACE_IMPORT_SINGLETON_DECLARE(SINGLETON_TYPE, CLASS, LOCK) extern template class SINGLETON_TYPE < CLASS, LOCK >; - -#elif defined (__GNUG__) - -# include "ace/config-g++-common.h" - -# define ACE_HAS_SSIZE_T - -# if !defined (ACE_MT_SAFE) || ACE_MT_SAFE != 0 - // ACE_MT_SAFE is #defined below, for all compilers. -# if !defined (_REENTRANT) -# define _REENTRANT -# endif /* _REENTRANT */ -# endif /* !ACE_MT_SAFE */ - -#else /* ! __IBMCPP__ && ! __GNUG__ */ -# ifdef __cplusplus /* Let it slide for C compilers. */ -# error unsupported compiler in ace/config-aix-5.x.h -# endif /* __cplusplus */ -#endif /* ! __xlC__ && ! __GNUG__ */ - -// Compiling for AIX. -#ifndef AIX -# define AIX -#endif /* AIX */ - -// Pick up all the detectable settings. -#include "ace/config-posix.h" - -// Regardless of what config-posix.h may indicate, AIX 5.3 is the first -// to support sem_timedwait(). Prior to that, use the emulation. -#if defined (ACE_HAS_POSIX_SEM_TIMEOUT) && \ - (defined (ACE_AIX_VERS) && (ACE_AIX_VERS < 503)) -# undef ACE_HAS_POSIX_SEM_TIMEOUT -#endif /* ACE_HAS_POSIX_SEM_TIMEOUT && ACE_AIX_VERS < 503 */ - -#if defined (ACE_DLL_SUFFIX) -# undef ACE_DLL_SUFFIX -#endif -#define ACE_DLL_SUFFIX ACE_TEXT (".so") - -#define ACE_DEFAULT_BASE_ADDR ((char *) 0x80000000) - -#define ACE_HAS_2_PARAM_ASCTIME_R_AND_CTIME_R - -#define ACE_HAS_SOCKLEN_T -#define ACE_HAS_4_4BSD_SENDMSG_RECVMSG - -// AIX has AIO, but the functions don't match those of other AIO-enabled -// platforms. If this is to work, it'll require some significant work, -// maybe moving the OS-abstraction stuff to an OS_AIO or some such thing. -//# define ACE_HAS_AIO_CALLS - -#define ACE_HAS_AIX_HI_RES_TIMER - -// Prototypes for both signal() and struct sigaction are consistent. -#define ACE_HAS_CONSISTENT_SIGNAL_PROTOTYPES - -// OS has readdir and friends. -#define ACE_HAS_DIRENT - -// OS supports the getrusage() system call -#define ACE_HAS_GETRUSAGE - -#define ACE_HAS_GPERF - -#define ACE_HAS_H_ERRNO - -#define ACE_LACKS_STDINT_H -#define ACE_LACKS_SYS_SYSCTL_H - -#define ACE_HAS_HANDLE_SET_OPTIMIZED_FOR_SELECT -#define ACE_HAS_NONCONST_SELECT_TIMEVAL -#define ACE_HAS_ICMP_SUPPORT 1 -#define ACE_HAS_IP_MULTICAST - -// Lacks perfect filtering, must bind group address. -#if !defined ACE_LACKS_PERFECT_MULTICAST_FILTERING -# define ACE_LACKS_PERFECT_MULTICAST_FILTERING 1 -#endif /* ACE_LACKS_PERFECT_MULTICAST_FILTERING */ - -#define ACE_HAS_MSG - -// Compiler/platform supports poll(). -#define ACE_HAS_POLL - -// Platform supports POSIX O_NONBLOCK semantics. -#define ACE_HAS_POSIX_NONBLOCK - -#define ACE_HAS_POSIX_TIME -// ... but needs to include another header for it on 4.2+ -# define ACE_HAS_BROKEN_POSIX_TIME -// ... and needs another typedef -#define ACE_LACKS_TIMESPEC_T -#define ACE_HAS_SELECT_H - -#define ACE_HAS_REENTRANT_FUNCTIONS - -#define ACE_HAS_SIOCGIFCONF - -// Compiler/platform defines the sig_atomic_t typedef -#define ACE_HAS_SIG_ATOMIC_T -#define ACE_HAS_SIGINFO_T -#define ACE_LACKS_SIGINFO_H -#define ACE_HAS_P_READ_WRITE - -#define ACE_HAS_SIGWAIT -#define ACE_HAS_SOCKADDR_IN_SIN_LEN -#define ACE_HAS_STRBUF_T - -// Compiler supports stropts.h -#define ACE_HAS_STREAMS -// #define ACE_HAS_STREAM_PIPES - -// AIX bzero() -#define ACE_HAS_STRINGS - -#define ACE_HAS_STRUCT_NETDB_DATA - -// Dynamic linking is in good shape on newer OS/patch levels. If you have -// trouble with the dynamic linking parts of ACE, and can't patch your OS -// up to latest levels, comment this out. -#define ACE_HAS_SVR4_DYNAMIC_LINKING -// This is tightly related to dynamic linking... -#define ACE_HAS_AUTOMATIC_INIT_FINI - -#define ACE_HAS_SVR4_GETTIMEOFDAY - -#define ACE_HAS_SYSV_IPC -#define ACE_HAS_TIMOD_H -#define ACE_HAS_XTI -#define ACE_HAS_BROKEN_T_ERROR -#define ACE_TLI_TCP_DEVICE "/dev/xti/tcp" - -#define ACE_HAS_UALARM - -#define ACE_HAS_UCONTEXT_T - -#define ACE_HAS_CTYPE_T - -// Platform has XPG4 wide character type and functions. However, the size -// of wchar_t changes for 32- vs. 64-bit builds (unsigned short vs. unsigned -// int, respectively). -#define ACE_HAS_XPG4_MULTIBYTE_CHAR -#ifdef __64BIT__ -# define ACE_SIZEOF_WCHAR 4 -#else -# define ACE_SIZEOF_WCHAR 2 -#endif /* __64BIT__ */ - -#define ACE_LACKS_NETINET_TCP_H - -// AIX uses LIBPATH to search for libraries -#define ACE_LD_SEARCH_PATH ACE_TEXT ("LIBPATH") - -// Defines the page size of the system. -#define ACE_PAGE_SIZE 4096 - -//************************************************************** -// -// Threads related definitions. -// -// The threads on AIX are generally POSIX P1003.1c (ACE_HAS_PTHREADS). -// However, there is also a kernel thread ID (tid_t) that is used in -// ACE_Log_Msg (printing the thread ID). The tid_t is not the same as -// pthread_t, and can't derive one from the other - thread_self() gets -// the tid_t (kernel thread ID) if called from a thread. -// Thanks very much to Chris Lahey for straightening this out. - -#if defined (ACE_HAS_THREADS) -# if !defined (ACE_MT_SAFE) -# define ACE_MT_SAFE 1 -# endif - -# define ACE_HAS_PTHREADS -# define ACE_HAS_PTHREADS_UNIX98_EXT -# define ACE_HAS_PTHREAD_CONTINUE_NP -# define ACE_HAS_PTHREAD_SUSPEND_NP -# define ACE_HAS_RECURSIVE_MUTEXES -# define ACE_HAS_RECURSIVE_THR_EXIT_SEMANTICS -# define ACE_HAS_SIGTHREADMASK -# define ACE_HAS_THREAD_SPECIFIC_STORAGE - -# define ACE_LACKS_THREAD_PROCESS_SCOPING -#else -# undef ACE_HAS_THREADS -#endif /* ACE_HAS_THREADS != 0 */ - -#define ACE_MALLOC_ALIGN 8 - -#if (defined _XOPEN_SOURCE && (_XOPEN_SOURCE - 0) >= 500) && !defined(_UNIX95) -# define ACE_HAS_3_PARAM_WCSTOK -#endif /* (_XOPEN_SOURCE -0) >= 500 && !_UNIX95 */ - -#if defined (_ACE_DISABLE_AIO_CALLS_) -# if defined (ACE_HAS_AIO_CALLS) -# undef ACE_HAS_AIO_CALLS -# endif -# undef _ACE_DISABLE_AIO_CALLS_ -#endif - -// AIX's /usr/include/unistd.h sets _POSIX_SEMAPHORE to indicate the system -// supplies such a facility, but the headers don't enable it unless -// _XOPEN_SOURCE >= 500. So disable semaphores here if _XOPEN_SOURCE isn't -// up to snuff. -#if defined (ACE_HAS_POSIX_SEM) && \ - (!defined (_XOPEN_SOURCE) || (_XOPEN_SOURCE-0 < 500)) -# undef ACE_HAS_POSIX_SEM -#endif - -// I think this is correct, but needs to be verified... -Steve Huston -#define ACE_HAS_SIGTIMEDWAIT - -// AIX 5.1 has netinet/tcp.h -#undef ACE_LACKS_NETINET_TCP_H - -#define ACE_HAS_SCANDIR -#define ACE_SCANDIR_CMP_USES_VOIDPTR -#define ACE_SCANDIR_SEL_LACKS_CONST -#define ACE_HAS_SIGSUSPEND -#define ACE_HAS_TIMEZONE /* Call tzset() to set timezone */ -#define ACE_LACKS_ISCTYPE -#define ACE_HAS_STRSIGNAL -#define ACE_NEEDS_STRSIGNAL_RANGE_CHECK -#define ACE_HAS_SOCKADDR_IN6_SIN6_LEN - - -#if defined (ACE_AIX_VERS) && (ACE_AIX_VERS < 503) -# define ACE_LACKS_UNSETENV -# define ACE_LACKS_LOG2 -# define ACE_LACKS_PTHREAD_ATTR_SETSTACK -#endif /* ACE_AIX_VERS < 503 */ - -#define ACE_SSIZE_T_FORMAT_SPECIFIER_ASCII "%ld" -#define ACE_SIZE_T_FORMAT_SPECIFIER_ASCII "%lu" - -#endif /* ACE_CONFIG_AIX_5_X_H */ |