diff options
Diffstat (limited to 'ACE/ace/config-irix6.x-common.h')
| -rw-r--r-- | ACE/ace/config-irix6.x-common.h | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/ACE/ace/config-irix6.x-common.h b/ACE/ace/config-irix6.x-common.h new file mode 100644 index 00000000000..82a419edd59 --- /dev/null +++ b/ACE/ace/config-irix6.x-common.h @@ -0,0 +1,255 @@ +/* -*- C++ -*- */ +// +// $Id$ +// +// This file contains the common configuration options for both +// SGI/MIPSPro C++ and g++ under IRIX 6.X +// +// For IRIX 6.2 there are several patches that should be applied to +// get reliable operation with multi-threading and exceptions. +// Specifically you should get a reasonable current IRIX, Compiler +// and POSIX patch-sets. + +// For IRIX 6.[34] it's less critical, but it's still recommended +// that you apply the applicable patch-sets (IRIX and Compiler I believe). + +// These patches are updated frequently, so you should ask your support +// contact or search SGI's web site (http://www.sgi.com) for the latest +// version. + +// Use this file for IRIX 6.[234] if you have the pthreads patches +// installed. + +#ifndef ACE_CONFIG_IRIX6X_COMMON_H + +#ifndef IRIX6 +# define IRIX6 +#endif + +#if ! defined(ACE_CONFIG_H) +#error "This file may only be included by config-irix6.x-sgic++.h, config-irix6.x-kcc.h or config-irix6.x-g++.h" +#endif + +// The Irix 6.x float.h doesn't allow us to distinguish between a +// double and a long double. So, we have to hard-code this. Thanks +// to Bob Laferriere <laferrie@gsao.med.ge.com> for figuring it out. +#if defined (_MIPS_SIM) /* 6.X System */ +# include <sgidefs.h> +# if defined (__GNUC__) +# define ACE_SIZEOF_LONG_DOUBLE 16 +# elif defined (_MIPS_SIM_NABI32) && (_MIPS_SIM == _MIPS_SIM_NABI32) +# define ACE_SIZEOF_LONG_DOUBLE 16 +# elif defined (_MIPS_SIM_ABI32) && (_MIPS_SIM == _MIPS_SIM_ABI32) +# define ACE_SIZEOF_LONG_DOUBLE 8 +# elif defined (_MIPS_SIM_ABI64) && (_MIPS_SIM == _MIPS_SIM_ABI64) +# define ACE_SIZEOF_LONG_DOUBLE 16 +# elif !defined (ACE_SIZEOF_LONG_DOUBLE) +# define ACE_SIZEOF_LONG_DOUBLE 8 +# endif +#else +# define ACE_SIZEOF_LONG_DOUBLE 8 /* 5.3 System */ +#endif + +// petern, Next part of it: + +// Platform supports getpagesize() call. +#define ACE_HAS_GETPAGESIZE + +// Platform has no implementation of pthread_condattr_setpshared(), +// even though it supports pthreads! (like Irix 6.2) +#define ACE_LACKS_CONDATTR_PSHARED +#define ACE_LACKS_MUTEXATTR_PSHARED + +// Platform/compiler has the sigwait(2) prototype +#define ACE_HAS_SIGWAIT +#define ACE_HAS_SIGTIMEDWAIT +#define ACE_HAS_SIGSUSPEND + +// Platform supports System V IPC (most versions of UNIX, but not Win32) +#define ACE_HAS_SYSV_IPC + +// Platform requires void * for mmap(). +#define ACE_HAS_VOIDPTR_MMAP + +// Platform supports recvmsg and sendmsg. +#define ACE_HAS_MSG + +// Compiler/platform contains the <sys/syscall.h> file. +#define ACE_HAS_SYS_SYSCALL_H + +// Compiler/platform supports alloca() +// Although ACE does have alloca() on this compiler/platform combination, it is +// disabled by default since it can be dangerous. Uncomment the following line +// if you ACE to use it. +//#define ACE_HAS_ALLOCA + +// Compiler/platform has <alloca.h> +#define ACE_HAS_ALLOCA_H + +// Irix needs to define bzero() in this odd file <bstring.h> +#define ACE_HAS_BSTRING + +// Compiler/platform has the getrusage() system call. +#define ACE_HAS_GETRUSAGE + +// Platform supports POSIX O_NONBLOCK semantics. +#define ACE_HAS_POSIX_NONBLOCK + +// Compiler/platform has correctly prototyped header files. +#define ACE_HAS_CPLUSPLUS_HEADERS + +// Platform contains <poll.h>. +#define ACE_HAS_POLL + +// Platform supports the /proc file system. +#define ACE_HAS_PROC_FS + +// Compiler/platform defines the sig_atomic_t typedef. +#define ACE_HAS_SIG_ATOMIC_T + +// Platform supports SVR4 extended signals. +#define ACE_HAS_SIGINFO_T +#define ACE_HAS_UCONTEXT_T + +// Compiler supports the ssize_t typedef. +#define ACE_HAS_SSIZE_T + +// Platform supports STREAMS. +#define ACE_HAS_STREAMS + +// Compiler/platform supports strerror (). +#define ACE_HAS_STRERROR + +// Compiler/platform supports struct strbuf. +#define ACE_HAS_STRBUF_T + +// Compiler/platform supports SVR4 dynamic linking semantics. +#define ACE_HAS_SVR4_DYNAMIC_LINKING + +// Platform provides <sys/filio.h> header. +#define ACE_HAS_SYS_FILIO_H + +// Compiler/platform defines a union semun for SysV shared memory. +#define ACE_HAS_SEMUN + +// Platform supports IP multicast +#define ACE_HAS_IP_MULTICAST +#ifdef ACE_LACKS_PERFECT_MULTICAST_FILTERING + #undef ACE_LACKS_PERFECT_MULTICAST_FILTERING +#endif +#define ACE_LACKS_PERFECT_MULTICAST_FILTERING 1 + +//************************************************************** +// Not so sure how next lines should look like + +// Platform supports POSIX timers via timestruc_t. +#define ACE_HAS_POSIX_TIME + +//************************************************************** + +// IRIX 6.4 and below do not support reentrant netdb functions +// (getprotobyname_r, getprotobynumber_r, gethostbyaddr_r, +// gethostbyname_r, getservbyname_r). +#if (ACE_IRIX_VERS <= 64) && !defined (ACE_HAS_NETDB_REENTRANT_FUNCTIONS) +#define ACE_LACKS_NETDB_REENTRANT_FUNCTIONS +#endif /* ACE_HAS_NETDB_REENTRANT_FUNCTIONS */ + +#define ACE_HAS_DIRENT +// Unless the thread enabled version is used the readdir_r interface +// does not get defined in IRIX 6.2 +#define ACE_LACKS_READDIR_R +#define ACE_LACKS_RWLOCK_T + +#define ACE_HAS_GPERF + +#define ACE_HAS_NONCONST_SELECT_TIMEVAL +#define ACE_HAS_BROKEN_DGRAM_SENDV + +#define ACE_LACKS_PLACEMENT_OPERATOR_DELETE +#define ACE_PI_CONTROL_BLOCK_ALIGN_LONGS 2 + +// Platform has POSIX terminal interface. +#define ACE_HAS_TERMIOS + +// IRIX 6.5 supports AIO +#define ACE_HAS_AIO_CALLS +#define ACE_POSIX_AIOCB_PROACTOR +#define ACE_HAS_SGIDLADD +#define ACE_HAS_P_READ_WRITE +#define ACE_LACKS_LINEBUFFERED_STREAMBUF +#define ACE_LACKS_STDINT_H +#define ACE_HAS_SYSENT_H +#define ACE_HAS_SYSINFO + +// Platform has support for multi-byte character support compliant +// with the XPG4 Worldwide Portability Interface wide-character +// classification. +#define ACE_HAS_XPG4_MULTIBYTE_CHAR + +// We need to setup a very high address or Naming_Test won't run. +#define ACE_DEFAULT_BASE_ADDR ((char *) (1024U * 1024 * 1024)) + +#define ACE_LACKS_SIGNED_CHAR + +// Platform supports reentrant functions (i.e., all the POSIX *_r +// functions). +#define ACE_HAS_REENTRANT_FUNCTIONS + +// Optimize ACE_Handle_Set for select(). +#define ACE_HAS_HANDLE_SET_OPTIMIZED_FOR_SELECT + +// Platform does not support reentrant password file accessor functiions. +#define ACE_LACKS_PWD_REENTRANT_FUNCTIONS + +// uses ctime_r & asctime_r with only two parameters vs. three +#define ACE_HAS_2_PARAM_ASCTIME_R_AND_CTIME_R + +// Prototypes for both signal() and struct sigaction are consistent. +#define ACE_HAS_CONSISTENT_SIGNAL_PROTOTYPES + +#define ACE_HAS_UALARM + +// Scheduling functions are declared in <sched.h> +#define ACE_NEEDS_SCHED_H + +// Compile using multi-thread libraries by default +#if !defined (ACE_MT_SAFE) + #define ACE_MT_SAFE 1 +#endif /* ACE_MT_SAFE */ + +#if (ACE_MT_SAFE != 0) + +// Add threading support + +#define ACE_HAS_IRIX62_THREADS + +// Needed for the threading stuff? +#include /**/ <task.h> +#define PTHREAD_MIN_PRIORITY PX_PRIO_MIN +#define PTHREAD_MAX_PRIORITY PX_PRIO_MAX + +// ACE supports threads. +#define ACE_HAS_THREADS + +// Platform has no implementation of pthread_condattr_setpshared(), +// even though it supports pthreads! (like Irix 6.2) +#define ACE_LACKS_CONDATTR_PSHARED +#define ACE_LACKS_MUTEXATTR_PSHARED + +// IRIX 6.2 supports a variant of POSIX Pthreads, supposedly POSIX 1c +#define ACE_HAS_PTHREADS +#define ACE_HAS_PTHREADS_STD + +// Compiler/platform has thread-specific storage +#define ACE_HAS_THREAD_SPECIFIC_STORAGE + +// The pthread_cond_timedwait call does not reset the timer. +#define ACE_LACKS_COND_TIMEDWAIT_RESET 1 + +// When threads are enabled READDIR_R is supported on IRIX. +#undef ACE_LACKS_READDIR_R + +#endif /* (ACE_MT_SAFE == 0) */ + + +#endif /* ACE_CONFIG_IRIX6X_COMMON_H */ |