diff options
Diffstat (limited to 'ACE/tests/rtems_init.c')
| -rw-r--r-- | ACE/tests/rtems_init.c | 210 |
1 files changed, 210 insertions, 0 deletions
diff --git a/ACE/tests/rtems_init.c b/ACE/tests/rtems_init.c new file mode 100644 index 00000000000..81750a913e9 --- /dev/null +++ b/ACE/tests/rtems_init.c @@ -0,0 +1,210 @@ +/* + * RTEMS Network configuration/initialization + * + * This file is a merger of the netdemo/init.c and networkconfig.h + * with some modifications to support loopback only. This file + * is OK for a starting point for a real networked application. + * --joel sherrill 16 Mar 2001 + * + * This program may be distributed and used for any purpose. + * I ask only that you: + * 1. Leave this author information intact. + * 2. Document any changes you make. + * + * W. Eric Norum + * Saskatchewan Accelerator Laboratory + * University of Saskatchewan + * Saskatoon, Saskatchewan, CANADA + * eric@skatter.usask.ca + * + * $Id$ + */ + +#include <bsp.h> + +#define CONFIGURE_TEST_NEEDS_CONSOLE_DRIVER +#define CONFIGURE_TEST_NEEDS_CLOCK_DRIVER +#define CONFIGURE_RTEMS_INIT_TASKS_TABLE + +#define CONFIGURE_EXECUTIVE_RAM_SIZE (512*1024) +#define CONFIGURE_MAXIMUM_SEMAPHORES 20 +#define CONFIGURE_MAXIMUM_TASKS 20 + +#define CONFIGURE_MICROSECONDS_PER_TICK 10000 + +#define CONFIGURE_INIT_TASK_STACK_SIZE (10*1024) +#define CONFIGURE_INIT_TASK_PRIORITY 120 +#define CONFIGURE_INIT_TASK_INITIAL_MODES (RTEMS_PREEMPT | \ + RTEMS_NO_TIMESLICE | \ + RTEMS_NO_ASR | \ + RTEMS_INTERRUPT_LEVEL(0)) + +#define CONFIGURE_INIT +rtems_task Init (rtems_task_argument argument); + +#include <confdefs.h> + +#include <stdio.h> +#include <rtems/rtems_bsdnet.h> +/* start of #include "../networkconfig.h" */ + +/* + * Network configuration + * + ************************************************************ + * EDIT THIS FILE TO REFLECT YOUR NETWORK CONFIGURATION * + * BEFORE RUNNING ANY RTEMS PROGRAMS WHICH USE THE NETWORK! * + ************************************************************ + * + * $Id$ + */ + +#ifndef _RTEMS_NETWORKCONFIG_H_ +#define _RTEMS_NETWORKCONFIG_H_ + +#ifndef RTEMS_BSP_NETWORK_DRIVER_NAME +#warning "RTEMS_BSP_NETWORK_DRIVER_NAME is not defined" +#define RTEMS_BSP_NETWORK_DRIVER_NAME "no_network1" +#endif + +#ifndef RTEMS_BSP_NETWORK_DRIVER_ATTACH +#warning "RTEMS_BSP_NETWORK_DRIVER_ATTACH is not defined" +#define RTEMS_BSP_NETWORK_DRIVER_ATTACH 0 +#endif + +/* #define RTEMS_USE_BOOTP */ + +#include <bsp.h> + +/* + * Define RTEMS_SET_ETHERNET_ADDRESS if you want to specify the + * Ethernet address here. If RTEMS_SET_ETHERNET_ADDRESS is not + * defined the driver will choose an address. + */ +#define RTEMS_SET_ETHERNET_ADDRESS +#if (defined (RTEMS_SET_ETHERNET_ADDRESS)) +/* static char ethernet_address[6] = { 0x08, 0x00, 0x3e, 0x12, 0x28, 0xb1 }; */ +static char ethernet_address[6] = { 0x00, 0x80, 0x7F, 0x22, 0x61, 0x77 }; + +#endif + +#define RTEMS_USE_LOOPBACK +#define RTEMS_USE_LOOPBACK_ONLY +#ifdef RTEMS_USE_LOOPBACK +/* + * Loopback interface + */ +int rtems_bsdnet_loopattach(struct rtems_bsdnet_ifconfig *, int); + +#ifdef RTEMS_USE_LOOPBACK_ONLY +static struct rtems_bsdnet_ifconfig netdriver_config = { +#else +static struct rtems_bsdnet_ifconfig loopback_config = { +#endif + "lo0", /* name */ + rtems_bsdnet_loopattach, /* attach function */ + + NULL, /* link to next interface */ + + "127.0.0.1", /* IP address */ + "255.0.0.0", /* IP net mask */ +}; +#endif + +/* + * Default network interface + */ +#ifndef RTEMS_USE_LOOPBACK_ONLY +static struct rtems_bsdnet_ifconfig netdriver_config = { + RTEMS_BSP_NETWORK_DRIVER_NAME, /* name */ + RTEMS_BSP_NETWORK_DRIVER_ATTACH, /* attach function */ + +#ifdef RTEMS_USE_LOOPBACK + &loopback_config, /* link to next interface */ +#else + NULL, /* No more interfaces */ +#endif + +#if (defined (RTEMS_USE_BOOTP)) + NULL, /* BOOTP supplies IP address */ + NULL, /* BOOTP supplies IP net mask */ +#else + "XXX.YYY.ZZZ.XYZ", /* IP address */ + "255.255.255.0", /* IP net mask */ +#endif /* !RTEMS_USE_BOOTP */ + +#if (defined (RTEMS_SET_ETHERNET_ADDRESS)) + ethernet_address, /* Ethernet hardware address */ +#else + NULL, /* Driver supplies hardware address */ +#endif + 0 /* Use default driver parameters */ +}; +#endif + +/* + * Network configuration + */ +struct rtems_bsdnet_config rtems_bsdnet_config = { + &netdriver_config, + +#if (defined (RTEMS_USE_BOOTP)) + rtems_bsdnet_do_bootp, +#else + NULL, +#endif + + 0, /* Default network task priority */ + 0, /* Default mbuf capacity */ + 0, /* Default mbuf cluster capacity */ + +#if (!defined (RTEMS_USE_BOOTP)) + "rtems_host", /* Host name */ + "nodomain.com", /* Domain name */ + "XXX.YYY.ZZZ.1", /* Gateway */ + "XXX.YYY.ZZZ.1", /* Log host */ + {"XXX.YYY.ZZZ.1" }, /* Name server(s) */ + {"XXX.YYY.ZZZ.1" }, /* NTP server(s) */ + + /* + * A real example -- DO NOT USE THIS YOURSELF!!! + */ + +#if 0 + "dy4", /* Host name */ + "NOT_oarcorp.com", /* Domain name */ + "192.168.1.2", /* Gateway */ + "192.168.1.2", /* Log host */ + {"192.168.1.2" }, /* Name server(s) */ + {"192.168.1.2" }, /* NTP server(s) */ +#endif +#endif /* !RTEMS_USE_BOOTP */ + +}; + +/* + * For TFTP test application + */ +#if (defined (RTEMS_USE_BOOTP)) +#define RTEMS_TFTP_TEST_HOST_NAME "BOOTP_HOST" +#define RTEMS_TFTP_TEST_FILE_NAME "BOOTP_FILE" +#else +#define RTEMS_TFTP_TEST_HOST_NAME "XXX.YYY.ZZZ.XYZ" +#define RTEMS_TFTP_TEST_FILE_NAME "tftptest" +#endif + +#endif /* _RTEMS_NETWORKCONFIG_H_ */ +/* end of #include "../networkconfig.h" */ + +/* + * RTEMS Startup Task + */ +rtems_task +Init (rtems_task_argument ignored) +{ + int doSocket(void); + + rtems_bsdnet_initialize_network (); + rtems_bsdnet_show_inet_routes (); + exit (0); +} |