diff options
Diffstat (limited to 'ace/config-irix6.x-common.h')
| -rw-r--r-- | ace/config-irix6.x-common.h | 274 |
1 files changed, 0 insertions, 274 deletions
diff --git a/ace/config-irix6.x-common.h b/ace/config-irix6.x-common.h deleted file mode 100644 index 103f6e9771e..00000000000 --- a/ace/config-irix6.x-common.h +++ /dev/null @@ -1,274 +0,0 @@ -/* -*- C++ -*- */ -// -// $Id$ -// -// This file contains the common configuration options for both -// SGI/MIPSPro C++ and g++ under IRIX 6.X -// -// For IRIX 6.2 there are several patches that should be applied to -// get reliable operation with multi-threading and exceptions. -// Specifically you should get a reasonable current IRIX, Compiler -// and POSIX patch-sets. - -// For IRIX 6.[34] it's less critical, but it's still recommended -// that you apply the applicable patch-sets (IRIX and Compiler I believe). - -// These patches are updated frequently, so you should ask your support -// contact or search SGI's web site (http://www.sgi.com) for the latest -// version. - -// Use this file for IRIX 6.[234] if you have the pthreads patches -// installed. - -#ifndef ACE_CONFIG_IRIX6X_COMMON_H - -#ifndef IRIX6 -# define IRIX6 -#endif - -#if ! defined(ACE_CONFIG_H) -#error "This file may only be included by config-irix6.x-sgic++.h, config-irix6.x-kcc.h or config-irix6.x-g++.h" -#endif - -// The Irix 6.x float.h doesn't allow us to distinguish between a -// double and a long double. So, we have to hard-code this. Thanks -// to Bob Laferriere <laferrie@gsao.med.ge.com> for figuring it out. -#if defined (_MIPS_SIM) /* 6.X System */ -# include <sgidefs.h> -# if defined (__GNUC__) -# define ACE_SIZEOF_LONG_DOUBLE 16 -# elif defined (_MIPS_SIM_NABI32) && (_MIPS_SIM == _MIPS_SIM_NABI32) -# define ACE_SIZEOF_LONG_DOUBLE 16 -# elif defined (_MIPS_SIM_ABI32) && (_MIPS_SIM == _MIPS_SIM_ABI32) -# define ACE_SIZEOF_LONG_DOUBLE 8 -# elif defined (_MIPS_SIM_ABI64) && (_MIPS_SIM == _MIPS_SIM_ABI64) -# define ACE_SIZEOF_LONG_DOUBLE 16 -# elif !defined (ACE_SIZEOF_LONG_DOUBLE) -# define ACE_SIZEOF_LONG_DOUBLE 8 -# endif -#else -# define ACE_SIZEOF_LONG_DOUBLE 8 /* 5.3 System */ -#endif - -// petern, Next part of it: - -// Platform supports getpagesize() call. -#define ACE_HAS_GETPAGESIZE - -// Platform has no implementation of pthread_condattr_setpshared(), -// even though it supports pthreads! (like Irix 6.2) -#define ACE_LACKS_CONDATTR_PSHARED -#define ACE_LACKS_MUTEXATTR_PSHARED - -// Platform/compiler has the sigwait(2) prototype -#define ACE_HAS_SIGWAIT -#define ACE_HAS_SIGTIMEDWAIT -#define ACE_HAS_SIGSUSPEND - -// Platform supports System V IPC (most versions of UNIX, but not Win32) -#define ACE_HAS_SYSV_IPC - -// Platform requires void * for mmap(). -#define ACE_HAS_VOIDPTR_MMAP - -// Platform supports recvmsg and sendmsg. -#define ACE_HAS_MSG - -// Compiler/platform contains the <sys/syscall.h> file. -#define ACE_HAS_SYSCALL_H - -// Compiler/platform supports snprintf -#define ACE_HAS_SNPRINTF - -// Compiler/platform supports alloca() -// Although ACE does have alloca() on this compiler/platform combination, it is -// disabled by default since it can be dangerous. Uncomment the following line -// if you ACE to use it. -//#define ACE_HAS_ALLOCA - -// Compiler/platform has <alloca.h> -#define ACE_HAS_ALLOCA_H - -// Irix needs to define bzero() in this odd file <bstring.h> -#define ACE_HAS_BSTRING - -// Compiler/platform has the getrusage() system call. -#define ACE_HAS_GETRUSAGE - -// Platform supports POSIX O_NONBLOCK semantics. -#define ACE_HAS_POSIX_NONBLOCK - -// Compiler/platform has correctly prototyped header files. -#define ACE_HAS_CPLUSPLUS_HEADERS - -// Platform contains <poll.h>. -#define ACE_HAS_POLL - -// No multi-threading so use poll() call -// - for easier debugging, if nothing else -// #define ACE_USE_POLL - -// Platform supports the /proc file system. -#define ACE_HAS_PROC_FS - -// Compiler/platform defines the sig_atomic_t typedef. -#define ACE_HAS_SIG_ATOMIC_T - -// Platform supports SVR4 extended signals. -#define ACE_HAS_SIGINFO_T -#define ACE_HAS_UCONTEXT_T - -// Compiler supports the ssize_t typedef. -#define ACE_HAS_SSIZE_T - -// Platform supports STREAMS. -#define ACE_HAS_STREAMS - -// Platform supports STREAM pipes (note that this is disabled by -// default, see the manual page on pipe(2) to find out how to enable -// it). -// #define ACE_HAS_STREAM_PIPES - -// Compiler/platform supports strerror (). -#define ACE_HAS_STRERROR - -// Compiler/platform supports struct strbuf. -#define ACE_HAS_STRBUF_T - -// Compiler/platform supports SVR4 dynamic linking semantics. -#define ACE_HAS_SVR4_DYNAMIC_LINKING - -// Platform provides <sys/filio.h> header. -#define ACE_HAS_SYS_FILIO_H - -// Compiler/platform defines a union semun for SysV shared memory. -#define ACE_HAS_SEMUN - -// Platform supports IP multicast -#define ACE_HAS_IP_MULTICAST -#ifdef ACE_LACKS_PERFECT_MULTICAST_FILTERING - #undef ACE_LACKS_PERFECT_MULTICAST_FILTERING -#endif -#define ACE_LACKS_PERFECT_MULTICAST_FILTERING 1 - -#define ACE_HAS_STRPTIME - -//************************************************************** -// Not so sure how next lines should look like - -// Platform supports POSIX timers via timestruc_t. -#define ACE_HAS_POSIX_TIME -#define ACE_LACKS_SYSTIME_H - -//************************************************************** - -// IRIX 6.4 and below do not support reentrant netdb functions -// (getprotobyname_r, getprotobynumber_r, gethostbyaddr_r, -// gethostbyname_r, getservbyname_r). -#if (ACE_IRIX_VERS <= 64) && !defined (ACE_HAS_NETDB_REENTRANT_FUNCTIONS) -#define ACE_LACKS_NETDB_REENTRANT_FUNCTIONS -#endif /* ACE_HAS_NETDB_REENTRANT_FUNCTIONS */ - -#define ACE_HAS_DIRENT -// Unless the thread enabled version is used the readdir_r interface -// does not get defined in IRIX 6.2 -#define ACE_LACKS_READDIR_R -#define ACE_LACKS_RWLOCK_T - -#define ACE_HAS_GPERF - -#define ACE_HAS_NONCONST_SELECT_TIMEVAL -#define ACE_HAS_BROKEN_DGRAM_SENDV - -#define ACE_LACKS_PLACEMENT_OPERATOR_DELETE -#define ACE_PI_CONTROL_BLOCK_ALIGN_LONGS 2 - -// Enables use of POSIX termios struct -#define ACE_USES_NEW_TERMIOS - -// IRIX 6.5 supports AIO -#define ACE_HAS_AIO_CALLS -#define ACE_POSIX_AIOCB_PROACTOR -#define ACE_HAS_SGIDLADD -#define ACE_HAS_P_READ_WRITE -#define ACE_LACKS_LINEBUFFERED_STREAMBUF -#define ACE_LACKS_STDINT_H -#define ACE_HAS_SETOWN -#define ACE_HAS_SYSENT_H -#define ACE_HAS_SYSINFO - -// Platform has support for multi-byte character support compliant -// with the XPG4 Worldwide Portability Interface wide-character -// classification. -#define ACE_HAS_XPG4_MULTIBYTE_CHAR - -// We need to setup a very high address or Naming_Test won't run. -#define ACE_DEFAULT_BASE_ADDR ((char *) (1024U * 1024 * 1024)) - -#define ACE_LACKS_SIGNED_CHAR - -// Platform supports reentrant functions (i.e., all the POSIX *_r -// functions). -#define ACE_HAS_REENTRANT_FUNCTIONS - -// Optimize ACE_Handle_Set for select(). -#define ACE_HAS_HANDLE_SET_OPTIMIZED_FOR_SELECT - -// Platform has terminal ioctl flags like TCGETS and TCSETS. -#define ACE_HAS_TERM_IOCTLS - -// Platform does not support reentrant password file accessor functiions. -#define ACE_LACKS_PWD_REENTRANT_FUNCTIONS - -// uses ctime_r & asctime_r with only two parameters vs. three -#define ACE_HAS_2_PARAM_ASCTIME_R_AND_CTIME_R - -// Prototypes for both signal() and struct sigaction are consistent. -#define ACE_HAS_CONSISTENT_SIGNAL_PROTOTYPES - -#define ACE_HAS_UALARM - -// Scheduling functions are declared in <sched.h> -#define ACE_NEEDS_SCHED_H - -// Compile using multi-thread libraries by default -#if !defined (ACE_MT_SAFE) - #define ACE_MT_SAFE 1 -#endif /* ACE_MT_SAFE */ - -#if (ACE_MT_SAFE != 0) - -// Add threading support - -#define ACE_HAS_IRIX62_THREADS - -// Needed for the threading stuff? -#include /**/ <task.h> -#define PTHREAD_MIN_PRIORITY PX_PRIO_MIN -#define PTHREAD_MAX_PRIORITY PX_PRIO_MAX - -// ACE supports threads. -#define ACE_HAS_THREADS - -// Platform has no implementation of pthread_condattr_setpshared(), -// even though it supports pthreads! (like Irix 6.2) -#define ACE_LACKS_CONDATTR_PSHARED -#define ACE_LACKS_MUTEXATTR_PSHARED - -// IRIX 6.2 supports a variant of POSIX Pthreads, supposedly POSIX 1c -#define ACE_HAS_PTHREADS -#define ACE_HAS_PTHREADS_STD - -// Compiler/platform has thread-specific storage -#define ACE_HAS_THREAD_SPECIFIC_STORAGE - -// The pthread_cond_timedwait call does not reset the timer. -#define ACE_LACKS_COND_TIMEDWAIT_RESET 1 - -// When threads are enabled READDIR_R is supported on IRIX. -#undef ACE_LACKS_READDIR_R - -#endif /* (ACE_MT_SAFE == 0) */ - - -#endif /* ACE_CONFIG_IRIX6X_COMMON_H */ |