diff options
Diffstat (limited to 'trunk/ACE/ace/Rtems_init.c')
| -rw-r--r-- | trunk/ACE/ace/Rtems_init.c | 221 |
1 files changed, 221 insertions, 0 deletions
diff --git a/trunk/ACE/ace/Rtems_init.c b/trunk/ACE/ace/Rtems_init.c new file mode 100644 index 00000000000..b0c548c4fd3 --- /dev/null +++ b/trunk/ACE/ace/Rtems_init.c @@ -0,0 +1,221 @@ +/* + * $Id$ + */ + +#if defined (ACE_HAS_RTEMS) + +#define RTEMS_BSP_NETWORK_DRIVER_NAME "ne1" +#define RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_ne_driver_attach +#define CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS 256 + +#define CONFIGURE_MAXIMUM_POSIX_THREADS 100 +#define CONFIGURE_MAXIMUM_POSIX_MUTEXES 300 +#define CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES 300 +#define CONFIGURE_MAXIMUM_POSIX_KEYS 100 +#define CONFIGURE_MAXIMUM_POSIX_TIMERS 100 +#define CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS 10 +#define CONFIGURE_MAXIMUM_POSIX_SEMAPHORES 300 +#define CONFIGURE_POSIX_INIT_THREAD_TABLE +#define CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT Init +#define CONFIGURE_MEMORY_FOR_POSIX (10*1024) +#define CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE (10*1024) + +#define CONFIGURE_TEST_NEEDS_CONSOLE_DRIVER +#define CONFIGURE_TEST_NEEDS_CLOCK_DRIVER + +#define CONFIGURE_EXECUTIVE_RAM_SIZE (512*1024) + +#define CONFIGURE_MICROSECONDS_PER_TICK 10000 + +#define CONFIGURE_MAXIMUM_SEMAPHORES 100 +#define CONFIGURE_MAXIMUM_TASKS 100 +#define CONFIGURE_INIT_TASK_PRIORITY 120 +#define CONFIGURE_INIT_TASK_INITIAL_MODES (RTEMS_PREEMPT | \ + RTEMS_NO_TIMESLICE | \ + RTEMS_NO_ASR | \ + RTEMS_INTERRUPT_LEVEL(0)) + +#include <bsp.h> + +char *rtems_progname; + +#define CONFIGURE_INIT + +rtems_task Init (rtems_task_argument argument); + +#include <confdefs.h> + +#include <stdio.h> + +#if !defined (ACE_LACKS_NETWORKING) + +#include <rtems/rtems_bsdnet.h> + +/* + * Network configuration + * + ************************************************************ + * EDIT THIS FILE TO REFLECT YOUR NETWORK CONFIGURATION * + * BEFORE RUNNING ANY RTEMS PROGRAMS WHICH USE THE NETWORK! * + ************************************************************ + */ + +#ifndef _RTEMS_NETWORKCONFIG_H_ +#define _RTEMS_NETWORKCONFIG_H_ + +#ifndef RTEMS_BSP_NETWORK_DRIVER_NAME +#warning "RTEMS_BSP_NETWORK_DRIVER_NAME is not defined" +#define RTEMS_BSP_NETWORK_DRIVER_NAME "no_network1" +#endif + +#ifndef RTEMS_BSP_NETWORK_DRIVER_ATTACH +#warning "RTEMS_BSP_NETWORK_DRIVER_ATTACH is not defined" +#define RTEMS_BSP_NETWORK_DRIVER_ATTACH 0 +#endif + +/* #define RTEMS_USE_BOOTP */ + +#include <bsp.h> + +/* + * Define RTEMS_SET_ETHERNET_ADDRESS if you want to specify the + * Ethernet address here. If RTEMS_SET_ETHERNET_ADDRESS is not + * defined the driver will choose an address. + */ +#define RTEMS_SET_ETHERNET_ADDRESS +#if (defined (RTEMS_SET_ETHERNET_ADDRESS)) +static char ethernet_address[6] = { 0x00, 0x80, 0x7F, 0x22, 0x61, 0x77 }; + +#endif + +#define RTEMS_USE_LOOPBACK + +#ifdef RTEMS_USE_LOOPBACK +/* + * Loopback interface + */ +int rtems_bsdnet_loopattach(struct rtems_bsdnet_ifconfig *, int); + +#ifdef RTEMS_USE_LOOPBACK_ONLY +static struct rtems_bsdnet_ifconfig netdriver_config = { +#else +static struct rtems_bsdnet_ifconfig loopback_config = { +#endif + "lo0", /* name */ + rtems_bsdnet_loopattach, /* attach function */ + + NULL, /* link to next interface */ + + "127.0.0.1", /* IP address */ + "255.0.0.0", /* IP net mask */ +}; +#endif + +/* + * Default network interface + */ +#ifndef RTEMS_USE_LOOPBACK_ONLY +static struct rtems_bsdnet_ifconfig netdriver_config = { + RTEMS_BSP_NETWORK_DRIVER_NAME, /* name */ + RTEMS_BSP_NETWORK_DRIVER_ATTACH, /* attach function */ + +#ifdef RTEMS_USE_LOOPBACK + &loopback_config, /* link to next interface */ +#else + NULL, /* No more interfaces */ +#endif + +#if (defined (RTEMS_USE_BOOTP)) + NULL, /* BOOTP supplies IP address */ + NULL, /* BOOTP supplies IP net mask */ +#else + "XXX.YYY.ZZZ.XYZ", /* IP address */ + "255.255.255.0", /* IP net mask */ +#endif /* !RTEMS_USE_BOOTP */ + +#if (defined (RTEMS_SET_ETHERNET_ADDRESS)) + ethernet_address, /* Ethernet hardware address */ +#else + NULL, /* Driver supplies hardware address */ +#endif + 0 /* Use default driver parameters */ +}; +#endif + +/* + * Network configuration + */ +struct rtems_bsdnet_config rtems_bsdnet_config = { + &netdriver_config, + +#if (defined (RTEMS_USE_BOOTP)) + rtems_bsdnet_do_bootp, +#else + NULL, +#endif + + 0, /* Default network task priority */ + 0, /* Default mbuf capacity */ + 0, /* Default mbuf cluster capacity */ + +#if (!defined (RTEMS_USE_BOOTP)) + "rtems_host", /* Host name */ + "nodomain.com", /* Domain name */ + "XXX.YYY.ZZZ.1", /* Gateway */ + "XXX.YYY.ZZZ.1", /* Log host */ + {"XXX.YYY.ZZZ.1" }, /* Name server(s) */ + {"XXX.YYY.ZZZ.1" }, /* NTP server(s) */ + + /* + * A real example -- DO NOT USE THIS YOURSELF!!! + */ + +#if 0 + "dy4", /* Host name */ + "NOT_oarcorp.com", /* Domain name */ + "192.168.1.2", /* Gateway */ + "192.168.1.2", /* Log host */ + {"192.168.1.2" }, /* Name server(s) */ + {"192.168.1.2" }, /* NTP server(s) */ +#endif +#endif /* !RTEMS_USE_BOOTP */ + +}; + +/* + * For TFTP test application + */ +#if (defined (RTEMS_USE_BOOTP)) +#define RTEMS_TFTP_TEST_HOST_NAME "BOOTP_HOST" +#define RTEMS_TFTP_TEST_FILE_NAME "BOOTP_FILE" +#else +#define RTEMS_TFTP_TEST_HOST_NAME "XXX.YYY.ZZZ.XYZ" +#define RTEMS_TFTP_TEST_FILE_NAME "tftptest" +#endif + +#endif /* _RTEMS_NETWORKCONFIG_H_ */ + +#endif /* ACE_LACKS_NETWORKING */ + +extern int main (int, char *[]); + +/* + * RTEMS Startup Task + */ +rtems_task +Init (rtems_task_argument not_used) +{ + int retval = 0; +#if !defined (ACE_LACKS_NETWORKING) + retval = rtems_bsdnet_initialize_network (); +#endif /* ACE_LACKS_NETWORKING */ + if (retval == 0) + { + retval = main (0, 0); + } +} + +#elif !defined (__GNUC__) +/* Make compilers stop complaining about an empty translation unit */ +static int shut_up_compiler = 0; +#endif /* ACE_HAS_RTEMS */ |