/* -*- C++ -*- */ //============================================================================= /** * @file SOCK_SEQPACK_Connector.h * * $Id$ * * @author Patrick J. Lardieri * @author Gaurav Naik, Lockheed Martin ATL * @author based on SOCK_STREAM_Connector * by Douglas C. Schmidt * */ //============================================================================= #ifndef ACE_SOCK_SEQPACK_CONNECTOR_H #define ACE_SOCK_SEQPACK_CONNECTOR_H #include /**/ "ace/pre.h" #include "ace/config.h" #include "ace/ACE_export.h" #include "ace/SOCK_SEQPACK_Association.h" #include "ace/Multihomed_INET_Addr.h" #if !defined (ACE_LACKS_PRAGMA_ONCE) # pragma once #endif /* ACE_LACKS_PRAGMA_ONCE */ // Forward declarations. class ACE_Time_Value; /** * @class ACE_SOCK_SEQPACK_Connector * * @brief Defines a factory that actively connects to a remote IP * address and TCP port, creating a new @c ACE_SOCK_SEQPACK_Association object. * * The @c ACE_SOCK_SEQPACK_Connector doesn't have a socket of its own, * i.e., it simply "borrows" the one from the @c ACE_SOCK_SEQPACK_Association * that's being connected. The reason for this is that the * underlying socket API doesn't use a factory socket to connect * data mode sockets. Therefore, there's no need to inherit * @c ACE_SOCK_SEQPACK_Connector from @c ACE_SOCK. A nice side-effect of * this is that @c ACE_SOCK_SEQPACK_Connector objects do not store state so * they can be used reentrantly in multithreaded programs. */ class ACE_Export ACE_SOCK_SEQPACK_Connector { public: // = Initialization and termination methods. /// Default constructor. ACE_SOCK_SEQPACK_Connector (void); /** * Actively connect to a peer, producing a connected @c ACE_SOCK_SEQPACK_Association * object if the connection succeeds. * * @param new_association The @c ACE_SOCK_SEQPACK_Association object that will be connected * to the peer. * @param remote_sap The address that we are trying to connect to. * The protocol family of @c remote_sap is used for * the connected socket. That is, if @c remote_sap * contains an IPv6 address, a socket with family * PF_INET6 will be used, else it will be PF_INET. * @param timeout Pointer to an @c ACE_Time_Value object with amount * of time to wait to connect. If the pointer is 0 * then the call blocks until the connection attempt * is complete, whether it succeeds or fails. If * *timeout == {0, 0} then the connection is done * using nonblocking mode. In this case, if the * connection can't be made immediately, this method * returns -1 and errno == EWOULDBLOCK. * If *timeout > {0, 0} then this is the maximum amount * of time to wait before timing out; if the specified * amount of time passes before the connection is made, * this method returns -1 and errno == ETIME. Note * the difference between this case and when a blocking * connect is attmpted that TCP times out - in the latter * case, errno will be ETIMEDOUT. * @param local_sap (optional) The local address to bind to. If it's * the default value of @c ACE_Addr::sap_any then the * OS will choose an unused port. * @param reuse_addr (optional) If the value is 1, the local address * (@c local_sap) is reused, even if it hasn't been * cleaned up yet. * @param flags Ignored. * @param perms Ignored. * @param protocol (optional) If value is 0, default SOCK_STREAM * protocol is selected by kernel (typically TCP). * * @return Returns 0 if the connection succeeds. If it fails, * -1 is returned and errno contains a specific error * code. */ ACE_SOCK_SEQPACK_Connector (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Addr &remote_sap, const ACE_Time_Value *timeout = 0, const ACE_Addr &local_sap = ACE_Addr::sap_any, int reuse_addr = 0, int flags = 0, int perms = 0, int protocol = 132); /** * Actively connect to a peer, producing a connected @c ACE_SOCK_SEQPACK_Association * object if the connection succeeds. * * @param new_association The @c ACE_SOCK_SEQPACK_Association object that will be connected * to the peer. * @param remote_sap The address that we are trying to connect to. * The protocol family of @c remote_sap is used for * the connected socket. That is, if @c remote_sap * contains an IPv6 address, a socket with family * PF_INET6 will be used, else it will be PF_INET. * @param timeout Pointer to an @c ACE_Time_Value object with amount * of time to wait to connect. If the pointer is 0 * then the call blocks until the connection attempt * is complete, whether it succeeds or fails. If * *timeout == {0, 0} then the connection is done * using nonblocking mode. In this case, if the * connection can't be made immediately, this method * returns -1 and errno == EWOULDBLOCK. * If *timeout > {0, 0} then this is the maximum amount * of time to wait before timing out; if the specified * amount of time passes before the connection is made, * this method returns -1 and errno == ETIME. Note * the difference between this case and when a blocking * connect is attmpted that TCP times out - in the latter * case, errno will be ETIMEDOUT. * @param local_sap (optional) The set of local addresses for SCTP to * bind to. * @param reuse_addr (optional) If the value is 1, the local address * (@c local_sap) is reused, even if it hasn't been * cleaned up yet. * @param flags Ignored. * @param perms Ignored. * @param protocol (optional) If value is 0, default SOCK_STREAM * protocol is selected by kernel (typically TCP). * * @return Returns 0 if the connection succeeds. If it fails, * -1 is returned and errno contains a specific error * code. */ ACE_SOCK_SEQPACK_Connector (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Addr &remote_sap, const ACE_Time_Value *timeout, const ACE_Multihomed_INET_Addr &local_sap, int reuse_addr = 0, int flags = 0, int perms = 0, int protocol = 132); /** * Actively connect to a peer, producing a connected @c ACE_SOCK_SEQPACK_Association * object if the connection succeeds. * * @param new_association The @c ACE_SOCK_SEQPACK_Association object that will be connected * to the peer. * @param remote_sap The address that we are trying to connect to. * The protocol family of @c remote_sap is used for * the connected socket. That is, if @c remote_sap * contains an IPv6 address, a socket with family * PF_INET6 will be used, else it will be PF_INET. * @param timeout Pointer to an @c ACE_Time_Value object with amount * of time to wait to connect. If the pointer is 0 * then the call blocks until the connection attempt * is complete, whether it succeeds or fails. If * *timeout == {0, 0} then the connection is done * using nonblocking mode. In this case, if the * connection can't be made immediately, this method * returns -1 and errno == EWOULDBLOCK. * If *timeout > {0, 0} then this is the maximum amount * of time to wait before timing out; if the specified * amount of time passes before the connection is made, * this method returns -1 and errno == ETIME. Note * the difference between this case and when a blocking * connect is attmpted that TCP times out - in the latter * case, errno will be ETIMEDOUT. * @param local_sap (optional) The local address to bind to. If it's * the default value of @c ACE_Addr::sap_any then the * OS will choose an unused port. * @param reuse_addr (optional) If the value is 1, the local address * (@c local_sap) is reused, even if it hasn't been * cleaned up yet. * @param flags Ignored. * @param perms Ignored. * @param protocol (optional) If value is 0, default SOCK_STREAM * protocol is selected by kernel (typically TCP). * * @return Returns 0 if the connection succeeds. If it fails, * -1 is returned and errno contains a specific error * code. */ int connect (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Addr &remote_sap, const ACE_Time_Value *timeout = 0, const ACE_Addr &local_sap = ACE_Addr::sap_any, int reuse_addr = 0, int flags = 0, int perms = 0, int protocol = 132); /** * Actively connect to a peer, producing a connected @c ACE_SOCK_SEQPACK_Association * object if the connection succeeds. * * @param new_association The @c ACE_SOCK_SEQPACK_Association object that will be connected * to the peer. * @param remote_sap The address that we are trying to connect to. * The protocol family of @c remote_sap is used for * the connected socket. That is, if @c remote_sap * contains an IPv6 address, a socket with family * PF_INET6 will be used, else it will be PF_INET. * @param timeout Pointer to an @c ACE_Time_Value object with amount * of time to wait to connect. If the pointer is 0 * then the call blocks until the connection attempt * is complete, whether it succeeds or fails. If * *timeout == {0, 0} then the connection is done * using nonblocking mode. In this case, if the * connection can't be made immediately, this method * returns -1 and errno == EWOULDBLOCK. * If *timeout > {0, 0} then this is the maximum amount * of time to wait before timing out; if the specified * amount of time passes before the connection is made, * this method returns -1 and errno == ETIME. Note * the difference between this case and when a blocking * connect is attmpted that TCP times out - in the latter * case, errno will be ETIMEDOUT. * @param local_sap (optional) The set of local addresses for SCTP to * bind to. * @param reuse_addr (optional) If the value is 1, the local address * (@c local_sap) is reused, even if it hasn't been * cleaned up yet. * @param flags Ignored. * @param perms Ignored. * @param protocol (optional) If value is 0, default SOCK_STREAM * protocol is selected by kernel (typically TCP). * * @return Returns 0 if the connection succeeds. If it fails, * -1 is returned and errno contains a specific error * code. */ int connect (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Addr &remote_sap, const ACE_Time_Value *timeout, const ACE_Multihomed_INET_Addr &local_sap, int reuse_addr = 0, int flags = 0, int perms = 0, int protocol = 132); /// Default dtor. ~ACE_SOCK_SEQPACK_Connector (void); // = Completion routine. /** * Try to complete a nonblocking connection that was begun by a * previous call to connect with a {0, 0} ACE_Time_Value timeout. * @see connect(). * * @param new_association The @c ACE_SOCK_SEQPACK_Association object that will be connected * to the peer. * @param remote_sap If non-0, it points to the @c ACE_INET_Addr object * that will contain the address of the connected peer. * @param timeout Same values and return value possibilites as for * connect(). @see connect(). */ int complete (ACE_SOCK_SEQPACK_Association &new_association, ACE_Addr *remote_sap = 0, const ACE_Time_Value *timeout = 0); /// Resets any event associations on this handle int reset_new_handle (ACE_HANDLE handle); // = Meta-type info typedef ACE_Multihomed_INET_Addr PEER_ADDR; typedef ACE_SOCK_SEQPACK_Association PEER_STREAM; /// Dump the state of an object. void dump (void) const; /// Declare the dynamic allocation hooks. ACE_ALLOC_HOOK_DECLARE; protected: /// Perform operations that ensure the socket is opened using /// BSD-style semantics (no QoS). int shared_open (ACE_SOCK_SEQPACK_Association &new_association, int protocol_family, int protocol, int reuse_addr); /// Perform operations that ensure the socket is opened using /// QoS-enabled semantics. int shared_open (ACE_SOCK_SEQPACK_Association &new_association, int protocol_family, int protocol, ACE_Protocol_Info *protocolinfo, ACE_SOCK_GROUP g, u_long flags, int reuse_addr); /// Perform operations that must be called before . int shared_connect_start (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Time_Value *timeout, const ACE_Addr &local_sap); int shared_connect_start (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Time_Value *timeout, const ACE_Multihomed_INET_Addr &local_sap); /// Perform operations that must be called after . int shared_connect_finish (ACE_SOCK_SEQPACK_Association &new_association, const ACE_Time_Value *timeout, int result); }; #if defined (__ACE_INLINE__) #include "ace/SOCK_SEQPACK_Connector.inl" #endif /* __ACE_INLINE__ */ #include /**/ "ace/post.h" #endif /* ACE_SOCK_SEQPACK_CONNECTOR_H */