diff options
author | Bui Nguyen Quoc Thanh <Thanh.BuiNguyenQuoc@vn.bosch.com> | 2020-04-07 09:34:49 +0700 |
---|---|---|
committer | Saya Sugiura <39760799+ssugiura@users.noreply.github.com> | 2020-07-06 10:04:07 +0900 |
commit | 379a6e5931679b7ffb7962ec16f5a0a155b34f3f (patch) | |
tree | c6c918e54cea0233417d7866568cc40ea58d1289 /doc/dlt_gateway.conf.5.md | |
parent | 72e8fe4e89162370dce4742f1b69ebfec3ac3928 (diff) | |
download | DLT-daemon-379a6e5931679b7ffb7962ec16f5a0a155b34f3f.tar.gz |
doc: md file for dlt_gateway.conf
Signed-off-by: Bui Nguyen Quoc Thanh <Thanh.BuiNguyenQuoc@vn.bosch.com>
Diffstat (limited to 'doc/dlt_gateway.conf.5.md')
-rw-r--r-- | doc/dlt_gateway.conf.5.md | 119 |
1 files changed, 119 insertions, 0 deletions
diff --git a/doc/dlt_gateway.conf.5.md b/doc/dlt_gateway.conf.5.md new file mode 100644 index 0000000..61eb063 --- /dev/null +++ b/doc/dlt_gateway.conf.5.md @@ -0,0 +1,119 @@ +% DLT_GATEWAY.CONF(5) + +# NAME + +**dlt_gateway.conf** - DLT configuration file for gateway + +# DESCRIPTION + +The configuration file dlt_gateway.conf allows to configure the different runtime behaviour of gateway in Multinode feature. + +The configuration file is written in an INI file format and contains information about different connected passive nodes. + +If Multinode feature is enabled, dlt-daemon loads by default the configuration file /etc/dlt_gateway.conf. + +An alternative configuration file can be loaded by changing `GatewayConfigFile` in dlt.conf(5). + +# GENERAL SECTION + +### Interval + +Time interval for reconnection to passive Node in second. + + Default: 1 + +# PASSIVENODE SECTION + +Each passive node’s connection parameters are specified in a unique numbered separate section + +([PassiveNode{1,2, …N}]). + + Example: [PassiveNode1] + +### IPaddress + +Because TCP is the only supported communication channel, + +the IPaddress and Port of the Passive DLT Daemon has to be specified. + +IP Address of passive node. Mandatory + +### Port + +TCP port. Default 3490 is used if no port is specified. + + Default: 3490 + +### EcuID + +ECU identifier of passive node. Mandatory. + +### Connect + +With the Connect property it is possible to specify when the Gateway DLT Daemon +shall connect to the passive node. + + Default: OnStartUp + + The following values are allowed: + + OnStartup The Gateway DLT Daemon tries to connect to the Passive DLT Daemon + immediately after the Gateway DLT Daemon is started. + OnDemand The Gateway DLT Daemon tries to connect to the Passive DLT Daemon + when it receives a connection request. + +### Timeout + +Stop connecting to passive node, if not successful after 10 retries. + +After <Timeout> of retries, the connection to passive Node is marked as DISABLED. + +It means there is no any retry anymore. + +Set to 0 for endless retry. + + Default: 10 + +### SendControl + +Send following control messages after connection is established. Optional. + + Default: disabled + +Supported Control messages: + + DLT_SERVICE_ID_GET_LOG_INFO 0x03 + DLT_SERVICE_ID_GET_DEFAULT_LOG_LEVEL 0x04 + DLT_SERVICE_ID_GET_SOFTWARE_VERSION 0x13 + +### SendSerialHeader + +Send Serial Header with control messages. Value in dlt.conf(5) is used as default if not specified. + + Default: disabled + +### SendPeriodicControl + +Send following control messages periodically. + + Default: disabled + +Format: + + control:interval[in seconds] + +# AUTHOR + +Thanh Bui Nguyen Quoc (thanh.buinguyenquoc (at) vn (dot) bosch (dot) vn) + +# COPYRIGHT + +Copyright (C) 2020 Advanced Driver Information Technology, Bosch and DENSO. License MPL-2.0: Mozilla Public License version 2.0 http://mozilla.org/MPL/2.0/. + +# BUGS + +See Github issue: <https://github.com/GENIVI/dlt-daemon/issues> + +# SEE ALSO + +**dlt.conf(5)**, **dlt-daemon(1)** |