summaryrefslogtreecommitdiff
path: root/src/daemon/dlt.conf
Commit message (Collapse)AuthorAgeFilesLines
* Add option in dlt.conf for bindAddress to specific IPs (#130)AdrianStoenescu2019-09-031-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | Add the possibility to have in dlt.conf an option that specifies a set of IP addresses. The daemon will do a socket bind only for this list, therefore external connections will be limited to this set of IP addresses. If this option is not given, the default INADDR_ANY is used ("0.0.0.0") as before. The option in dlt.conf can look like this: BindAddress = 160.48.199.98;160.48.199.97;160.48.199.226,160.48.199.186;160.48.199.139;172.16.222.99 There can be as many addresses but only specified on one single line. They have to be delimited by ',' or ';'. ' ' (space) delimiter does not work. IPv6 addresses are supported as well. For instance: BindAddress = fe80::255:7bff:feb5:7df7 IPv6 addresses are acceptable only if DLT_USE_IPv6 flag is ON at compile time. IPv4 addresses are acceptable only if DLT_USE_IPv6 flag is OFF at compile time. One cannot have both IPv4 and IPv6 format in the same time. Signed-off-by: Adrian Stoenescu Adrian.Stoenescu@harman.com
* UDP Multicast implementation (#155)Sunil-K-S2019-08-231-0/+12
| | | | | The feature can be enabled by setting WITH_UDP_CONNECTION to ON. Signed-off-by: sunil.s <sunil.s@lge.com>
* Revert "Add option in dlt.conf for bindAddress to specific IPs (#130)"Saya Sugiura2019-08-011-6/+0
| | | | This reverts commit e8716cc5c950e50411b23a7a6cafa3c063c59e90.
* Add option to set owner group of daemon FIFO (#122)Jiri Popek2019-07-251-1/+8
| | | | | | | | | | New option to set owner group of daemon FIFO (Default: /tmp/dlt) is added in dlt.conf. If this option is used properly, more secure tracing can be realized. Only application that is in dlt_user_apps_group can write log message to daemon FIFO. Signed-off-by: Yusuke Sato <yusuke-sato@apn.alpine.co.jp>
* Add option in dlt.conf for bindAddress to specific IPs (#130)AdrianStoenescu2019-07-251-0/+6
| | | | | | | | | | | | | | | | | | | | | | | Add the possibility to have in dlt.conf an option that specifies a set of IP addresses. The daemon will do a socket bind only for this list, therefore external connections will be limited to this set of IP addresses. If this option is not given, the default INADDR_ANY is used ("0.0.0.0") as before. The option in dlt.conf can look like this: BindAddress = 160.48.199.98;160.48.199.97;160.48.199.226,160.48.199.186;160.48.199.139;172.16.222.99 There can be as many addresses but only specified on one single line. They have to be delimited by ',' or ';'. ' ' (space) delimiter does not work. IPv6 addresses are supported as well. For instance: BindAddress = fe80::255:7bff:feb5:7df7 IPv6 addresses are acceptable only if DLT_USE_IPv6 flag is ON at compile time. IPv4 addresses are acceptable only if DLT_USE_IPv6 flag is OFF at compile time. One cannot have both IPv4 and IPv6 format in the same time. Signed-off-by: Adrian Stoenescu Adrian.Stoenescu@harman.com
* MultiNode: Specify config file location in dlt.confChristoph Lipka2016-10-241-3/+9
| | | | Signed-off-by: Christoph Lipka <clipka@jp.adit-jv.com>
* Add: Configuration of option of get log info response during context ↵Yusuke Sato2016-09-231-0/+4
| | | | | | | | | | registration Option of get log info response during context registration was fixed to 7. This modification enables to change that option. Signed-off-by: Yusuke Sato <yusuke-sato@apn.alpine.co.jp> Change-Id: Ia75f15cdb33e0bffd77c5ba71a1960e820714e61
* Add: Configuration of daemon FIFO sizeYusuke Sato2016-09-231-0/+3
| | | | | | | Configuration of daemon FIFO (default: /tmp/dlt) size is added to dlt.conf. Signed-off-by: Yusuke Sato <yusuke-sato@apn.alpine.co.jp> Change-Id: I05cc56b9a05e4c3a0a1af49c374f35ae10f4674d
* Set default log-levels in dlt.confStefan Vacek2015-12-091-1/+13
| | | | | | | | - feature: allow to define a default-log-level in dlt.conf (see dlt.conf for documentation) - bugfix: make dlt_unlock_mutex not inline to fix linkage - bugfix: initial log-level was not set correctly when no dlt-daemon was running Signed-off-by: Stefan Vacek <stefan.vacek@intel.com>
* Dlt MultiNodeChristoph Lipka2015-12-071-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MultiNode allows to connect DLT Daemons running on different operating systems, e.g. in a virtualized environment. The central component is the Gateway DLT Daemon which connects external DLT Clients, like the DLT Viewer running on a host computer, with Passive DLT Daemons running on nodes without a physical connection to external DLT clients. The Gateway DLT Daemon itself acts as a DLT client when connecting to a Passive DLT Daemon. To use the Gateway functionality, it has to be enabled in dlt.conf: GatewayMode = 1 All communication between passive nodes and DLT Viewer has to be send via the Gateway node. The Gateway node forwards log messages coming from passive nodes to all connected DLT clients. It also forwards command and control requests coming from DLT clients to the corresponding passive node. The Gateway DLT Daemon read a configuration file (dlt_gateway.conf) at startup with information about Passive DLT Daemon connections. Afterwards, the Daemon will try to connect to the passive DLT Daemons. If the connection cannot be established after the configured timeout, the Gateway DLT Daemon will give up connecting. The configuration file has to contain the following information about a passive node: [PassiveNode1] IPaddress = 192.168.2.35 Port = 3490 EcuID = ECU2 Connect = OnStartup ; timeout in seconds Timeout = 10 Precondition is, that the passive node is configured with the correct ECU id, ECU2 in this case. If the passive node sends messages with another than configured ECU id, the Gateway DLT Daemon will shut down the connection. It is also possible to connect to a passive DLT daemon using the dlt-passive-node-ctrl application. In this case "Connect=OnDemand" has to be configured in the configuration file. To connect to PassiveNode1, "dlt-passive-node-ctrl -n ECU2 -c 1" has to be executed. With "dlt-passive-node-ctrl -s" the status of passive node connections can be retrieved. Signed-off-by: Christoph Lipka <clipka@jp.adit-jv.com>
* DltLogstorage: Logstorage CacheChristoph Lipka2015-11-241-0/+3
| | | | | | | | | | | | | | | | | | When using DltLogstorage on internal storage device, it is needed to reduce writing to internal storage device as much as possible. This patch introduces sync strategies to Logstorage to provide that functionality. The ON_MSG strategy is the default sync strategy that flushes every written log message to the storage device (fflush). The ON_DAEMON_EXIT strategy only flushes data to disk when the daemon exits. The strategy can be defined per filter in the dlt_logstorage.conf configuration file by adding SyncBehavior=<Strategy> to a configuration. Signed-off-by: Christoph Lipka <clipka@jp.adit-jv.com>
* Offline logstorage: Offline logstorage featureS. Hameed2015-11-241-0/+13
| | | | | | | | | | | | | | Features: 1. Offline log storage to internal and external devices (PATH based trigger) 2. File options configurable in dlt.conf a : Appends timestamp in log file name (OfflineLogstorageTimestamp) b : Appends delimiter in log file name (OfflineLogstorageDelimiter) c : Wrap around value for log file count in file name (OfflineLogstorageMaxCounter) 3. Common config file parser support Signed-off-by: S. Hameed <shameed@jp.adit-jv.com> Signed-off-by: Christoph Lipka <clipka@jp.adit-jv.com>
* Unix socket control interfaceChristoph Lipka2015-11-241-0/+5
| | | | | | | | | | | | | | | | Control applications running in the same Linux OS should be able to communicate with the DLT Daemon via a socket connection. To be able to do that, the DLT Client library need to be extended. DLT Clients connected via this UNIX socket are not handled as normal DLT Clients and no log messages will be forwarded to them. This avoids problems in situations when a control application is connected to the DLT Daemon before any other 'real' DLT Client (e.g. DLT Viewer) is connected. In this situations, all already stored log messages are flushed to the control application and therefore lost, because the control application most likely ignore all incoming messages besides the one in which it is interested in. Signed-off-by: Christoph Lipka <clipka@jp.adit-jv.com>
* offline trace: supported trace file name configuration based on indexManikandan C2015-11-181-0/+3
| | | | | | | | | Changes made for trace file name configuration based on index and made it configurable from dlt.conf file. Using this configuration one can select either timestamp based or index based log file creation for offline trace. Signed-off-by: Manikandan C <Manikandan.Chockalingam@in.bosch.com>
* Offline Logstorage [1/4]: DLT preparation to enable offline logstorageS. Hameed2015-07-301-1/+8
| | | | Signed-off-by: S. Hameed <shameed@jp.adit-jv.com>
* Removed all trailing whitespacesLutz Helwing2015-07-211-1/+1
| | | | Signed-off-by: Alexander Wenzel <Alexander.AW.Wenzel@bmw.de>
* Make daemon buffer size configurableAlexander Wenzel2014-05-161-0/+9
| | | | Signed-off-by: Alexander Wenzel <Alexander.AW.Wenzel@bmw.de>
* Added new control message timezone.Alexander Wenzel2014-01-101-0/+7
| | | | Signed-off-by: Alexander Wenzel <Alexander.AW.Wenzel@bmw.de>
* Configurable Timeout on send.Alexander Wenzel2014-01-101-0/+3
| | | | Signed-off-by: Alexander Wenzel <Alexander.AW.Wenzel@bmw.de>
* Updated doxygen documentation, readme, man pages and release notesChristian Muck2012-06-131-2/+2
| | | | Signed-off-by: Christian Muck <christian.muck@bmw.de>
* Preparation of config files for releaseChristian Muck2012-06-131-6/+9
| | | | Signed-off-by: Christian Muck <christian.muck@bmw.de>
* [GDLT-94]: Send periodic software version messages.Lassi Marttala2012-06-131-1/+6
| | | | Signed-off-by: Christian Muck <christian.muck@bmw.de>
* [GDLT-67] dlt-system v2.0, check full commit message for rebase detailsLassi Marttala2012-06-131-3/+3
| | | | | | | | | | | | | | | [GDLT-67] Prepare build system. [GDLT-67] Config parsing, structure for thread handling [GDLT-67] Finalize configuration reading. [GDLT-67] Reimplementation of syslog, logfile, logprocess, shell. [GDLT-67] First complete version of the new dlt-system. [GDLT-67] Fixed header comments. authors, file names. [GDLT-67] Final touches. [GDLT-67] Fixed a problem with thread creation in optimized release binary. [GDLT-67] New configuration file. [GDLT-67] Added dlt debug output Signed-off-by: Christian Muck <christian.muck@bmw.de>
* Corrected the default values of dlt.confChristian Muck2012-05-301-4/+4
| | | | Signed-off-by: Christian Muck <christian.muck@bmw.de>
* Changed dlt loggingmode to default valueChristian Muck2012-03-281-1/+1
| | | | Signed-off-by: Christian Muck <christian.muck@bmw.de>
* Reverted old FIFO functions. Still SHM enabled by default.Alexander Wenzel2011-11-101-3/+3
|
* Added dlt-daemon internal logging configuration into dlt.conf file.Alexander Wenzel2011-11-091-0/+11
| | | | Internal logging to file now also possible.
* Prepared new version number and new config files installation.Alexander Wenzel2011-10-181-0/+81
View Lorry Controller Status