| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
| |
* function atomic_compare_exchange_strong expect a pointer to an _Atomic type. dlt_user_initialised is now an atomic_bool
* function dlt_set_filesize_max returned a DLT_LOG_ERROR which isn't a DltReturnValue. This commit replaces DLT_LOG_ERROR by DLT_RETURN_ERROR which is the expected return type
Signed-off-by: Sebastien RAILLET <sebastien.raillet@marelli.com>
|
|
|
|
| |
Signed-off-by: Saya Sugiura <ssugiura@jp.adit-jv.com>
|
|
|
|
|
|
|
| |
Extern logging_mode and logging_handle variables from commom.c
Reusing dlt_log_init() in cases dlt library internal log file is not opened and logging_mode is DLT_LOG_TO_FILE
Signed-off-by: Le-Tin <Tin.Le@vn.bosch.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit introduces the use of atomic_compare_exchange at beginning
of both dlt_init functions. This function checks in an atomic way, if
'dlt_user_initialised' is 'false' (first run through dlt_init) and directly
sets it 'true'. If a second thread also entered dlt-init at this point of time,
its call of atomic_compare_exchange will return false and dlt_init will be
immediately left due to that. This is only interesting for startup, because
before each call of dlt_init, there is a check on 'dlt_user_initialised' that
will fail for all later executions.
Signed-off-by: Darian Biastoch <dbiastoch@de.adit-jv.com>
|
|
|
|
|
|
|
|
|
|
| |
Removed duplicate "payload" pointer in dlt_client_send functions inside dlt_client.c.
This pointer was only needed to avoid one cast within a function call.
Now this cast is performed to get rid of clang-tidy analyzer warnings.
In addition to that, malloc calls were replaced through calloc to avoid a subsequent
memset with zero.
Signed-off-by: Darian Biastoch <dbiastoch@de.adit-jv.com>
|
|
|
|
| |
Signed-off-by: Saya Sugiura <ssugiura@jp.adit-jv.com>
|
|
|
|
|
|
|
|
|
| |
If dlt.h is included in external application, it needed to include
-DDLT_DISABLE_MACRO to make ifdef switch work. This commit adds
DLT_DISABLE_MACRO in dlt_user.h so that no additional definition is
needed in application.
Signed-off-by: Saya Sugiura <ssugiura@jp.adit-jv.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds new interfaces:
- dlt_user_log_write_start_w_given_buffer(): accepts a log buffer as an input.
- dlt_user_log_write_finish_w_given_buffer(): finalizes logging and send the message to corresponding output
This is to reduce DLT API calls in DLT application as much as possible
and avoid allocating dynamic memory within DLT library. The log buffer
has to be prepared in DLT application in order to use these interfaces.
Signed-off-by: Saya Sugiura <ssugiura@jp.adit-jv.com>
|
|
|
|
| |
Signed-Off By: Saya Sugiura <ssugiura@jp.adit-jv.com>
|
|
|
|
|
|
|
| |
Provides argument option to enable send and resync serial header
via command line.
Signed-off-by: Vo Trung Chi <Chi.VoTrung@vn.bosch.com>
|
|
|
| |
Co-authored-by: Saya Sugiura <39760799+ssugiura@users.noreply.github.com>
|
|
|
| |
Signed-off-by: Martin Willers <M.Willers@gmx.net>
|
|
|
|
|
|
|
| |
Use POSIX thread API to rename the housekeeper and segmented threads.
The currently used prctl() function is Linux specific and in general not
available on other platforms (e.g. QNX).
Signed-off-by: Sebastian Lipponer <mail@sebastianlipponer.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously the generated .pc file was changed to export an additional
include path such that '#include <dlt.h>' and '#include <dlt/dlt.h>' can
be used. However the exported CMake config file only supports the latter
include statement. Consequently code that uses the other legacy include
statement does not compile with the exported CMake config file.
This change fixes this inconsistency. It lets users compile existing
code with either the pkg-config .pc file or the CMake config file and
avoids code clutter that is currently necessary to make this work.
Signed-off-by: Sebastian Lipponer <mail@sebastianlipponer.de>
|
|
|
| |
According to AUTOSAR standard the TYLE for the BOOL type shall be set to 1. So I propose to initialize type_info variable for the BOOL type the same way as for uint8 type.
|
|
|
|
|
|
|
|
|
|
|
| |
If a file is deleted while a file transfer is ongoing,
the file transfer tries to seek through the whole file.
This is due to the fact the the file handle is held open.
getFileSerialNumber is already validating the file
by using stat.
If this call returns a negative value, we know
that a stat to the file is not possible anymore,
therefore further reading can be aborted.
|
|
|
|
|
|
| |
Fixing casting incorrect type
Signed-off-by: Dinh Cong Toan <toan.dinhcong@vn.bosch.com>
|
|
|
|
| |
Signed-off-by: Dinh Cong Toan <toan.dinhcong@vn.bosch.com>
|
|
|
|
|
|
|
| |
Several verbose condition in dlt_client.c are using printf() and fprintf()
that not print consistent logs to console. These are replaced by dlt-vlog().
Signed-off-by: KHANH LUONG HONG DUY khanh.luonghongduy@vn.bosch.com
|
|
|
|
|
|
|
|
| |
When processing dlt_user_log_send_log() function, message logs will be stored in
internal buffer in error case. Then, the error value is needed to handle correctly
before exiting.
Signed-off-by: Dinh Cong Toan <toan.dinhcong@vn.bosch.com>
|
|
|
|
|
|
|
| |
json-c dependency was removed from libdlt ('dlt_common') and shifted into 'dlt-control-common'. By this only the command line tools have a dependency on json-c.
dlt-control-common is now built as a static library, so that it can be linked against json-c. Command line tools that included only the .c file of dlt-control-common before, are now linked against this static libarary (see console/CMakeLists.txt).
Signed-off-by: dbiastoch <dbiastoch@de.adit-jv.com>
|
|
|
|
|
|
| |
Apply uncrustify for src/daemon/* and src/lib/*
Signed-off-by: KHANH LUONG HONG DUY <khanh.luonghongduy@vn.bosch.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-Added '-j' flag to dlt-receive for reading a json filter file
-Added more attributes to DltFilter (LogLevel, MaxPayload, MinPayload) for extended message filtering, when using old filters these values are set to default. Same behaviour, when they are not defined in json filter file.
-extended dlt_common.c to support json filter files and new DltFilter attributes
+add dlt_json_filter_load to parse a json filter file into a DltFilter
+add dlt_json_filter_save to print a DltFilter into a json file
-Two new libraries are used to parse the json filter files: json-c for Linux based systems and the QNX internal libjson for QNX systems
-gtest_dlt_common was modified to test the new function 'dlt_json_filter_load'
+add testfile_extended.dlt that contains a bigger varity of messages (different context/app IDs, lengths and log levels)
+add testfilter.json which is a valid json filter file
-New dependency on library was added to related CMakeLists and is described in README.md
Signed-off-by: dbiastoch <dbiastoch@de.adit-jv.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit is to revert the following commits:
- de4a4234
- fb9ff078
- db9917b3
- e4467f0e
- a567e01d
Those commits are from improvement but they seem to
break the dlt message header in some cases.
Signed-off-by: Bui Nguyen Quoc Thanh <thanh.buinguyenquoc@vn.bosch.com>
|
|
|
| |
Signed-off-by: Martin Willers <M.Willers@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Make Non-Verbose mode non-exclusive
Switching to global Non-Verbose mode now does not force Verbose messages to
also be sent as Non-Verbose ones anymore. That would not make any sense,
because Verbose messages don't have a MessageId and thus are all getting
the same MessageId of 65535.
Instead, setting global "Non-Verbose" mode will allow both Verbose and
Non-Verbose messages to be sent in a single session.
The "Verbose-APIs" (e.g. dlt_user_log_write_start()) will then only write
Verbose messages, whereas the "Non-Verbose APIs" (e.g. dlt_user_log_write_start_id())
will then only write Non-Verbose messages.
Signed-off-by: Martin Willers <M.Willers@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Create and install proper CMake *-target.cmake and *-config.cmake files,
for use by other CMake-using projects.
It installs a file called automotive-dlt-targets.cmake into a common
location for such files, namely
<prefix>/lib/cmake/automotive-dlt/automotive-dlt-targets.cmake
They can now call find_package(automotive-dlt) and obtain a target
called Genivi::dlt that they can link against with target_link_libraries(),
by which they automatically gain all necessary attributes, including libdlt's
include directories.
Signed-off-by: Martin Willers <M.Willers@gmx.net>
|
|
|
| |
Co-authored-by: FIXED-TERM Kaczorowski Radoslaw (BSOT/PJ-ES21) <Fixed-Term.Radoslaw.Kaczorowski@bosch-softtec.com>
|
|
|
|
|
|
| |
dlt_user_log_write_*_attr() enables to writing these types, but also support
adding "attributes" for them, i.e. a "name" and a "unit".
Signed-off-by: Martin Willers <M.Willers@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DLT Client code (#284)
Issue:
------
dlt_client_main_loop currently uses an infinite loop ("while (1)"). This
creates problems when a DLT client is running in a thread as part of a larger
application. Graceful exit (for example: during object destruction) is not
possible because a thread is running dlt_client_main_loop in the background.
It is also not possible to exit the client, if we want it to fetch only a
pre-decided number of messages.
Solution:
---------
Allow user to define a callback function to check whether the next message
should be fetched.
dlt-test-client.c has a new option to fetch a pre-decided number of messages,
after which the client will exit.
Signed-off-by: Sreeharsha Ramanavarapu <sreeharsha.r@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
| |
- Converting datatype to the correct one.
- As macro do not perform type-checking before, so these functions used
it with different datatype could create a lot of conversion warnings.
For this reason, these warnings could be consider as normal
information and will not be fixed.
Signed-off-by: Dinh Cong Toan <toan.dinhcong@vn.bosch.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Change the data type of variable 'size' in DltContextData struct
(dlt_user.h.in). Variable 'size' was used repeated with function
'sizeof()' many time, so change type to 'size_t' can avoid a lot of
warnings.
- Adding temporary variable to calculate the datasize header (define in
dlt_common.h) in 'dlt_common.c' file.
Signed-off-by: Dinh Cong Toan(RBVH/ECM12) <Toan.DinhCong@vn.bosch.com>
|
|
|
|
|
|
|
|
|
| |
- Correct the data type of 'headersize' and 'datasize' variables in
header 'dlt_common.h', then config those functions using this library.
- Explicit the data type.
Signed-off-by: Dinh Cong Toan(RBVH/ECM12) <Toan.DinhCong@vn.bosch.com>
|
|
|
|
|
|
|
| |
Since bionic does not support pthread_cancel(),
try to terminate housekeeper thread via SIGUSR1.
Signed-off-by: Bui Nguyen Quoc Thanh <thanh.buinguyenquoc@vn.bosch.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use timeout of polling as time for retry.
In case of timeout or failure of polling,
continue to close the socket.
It could take some times to get the socket is shutdown
So it means there could be some data available to read.
Try to consume the data and poll the socket again.
If read fails, time to close the socket then.
Signed-off-by: Bui Nguyen Quoc Thanh <thanh.buinguyenquoc@vn.bosch.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Current implementation had two issues:
- Remaining data in startup_buffer wasn't able to be sent to daemon
even dlt_user.timeout_at_exit_handler was set to more than 0
- Socket could be closed before all the data was sent to daemon
To solve this:
- dlt_unregister_app_flush_buffered_logs() won't clean appIDs if
any data is remaining in startup_buffer. atexit_handler will be
in charge of cleaning them
- Socket won't be closed if data wasn't sent due to errno EAGAIN or
EWOULDBLOCK. It retries until execution count reaches to maximum
DLT_USER_MAX_RETRY_COUNT (1000 as default)
Signed-off-by: Saya Sugiura <ssugiura@jp.adit-jv.com>
|
|
|
|
|
|
| |
Use cmake option to support version with major number only.
Signed-off-by: Bui Nguyen Quoc Thanh <thanh.buinguyenquoc@vn.bosch.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In order to disable injection message at dlt user,
set DLT_DISABLE_INJECTION_MSG_AT_USER to any value.
When injection message is disabled, libdlt won't poll
any data from receiver. It means libdlt will ignore all
data/messages from dlt-daemon.
By default, variable is unset so that dlt users are able to
handle data/messages from dlt-daemon.
Signed-off-by: Bui Nguyen Quoc Thanh <thanh.buinguyenquoc@vn.bosch.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The poll timeout was only set for fifo.
TCP connections require this timeout as well.
dlt_user_log_check_user_message also validated the file descriptor
to be greater 0.
Because 0 is a valid file descriptor this check has been changed
to greater or equal 0.
poll receives a timeout in milliseconds.
The given paramter was in nanoseconds.
An additional define takes adds the delay in miliseconds.
Signed-off-by: Alexander Mohr <alexander.m.mohr@daimler.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For more information about VSOCK, see "man vsock"
( https://man7.org/linux/man-pages/man7/vsock.7.html ).
Makes it possible for processes in a virtual machine to log directly in
DLT running on host without setting up a network connection between
guest and host. It is also probably more efficient. Have not done any
performance measurements (not main reason for patch), but no forwarding
is required as when running DLT in a multi-node setup.
When building dlt-daemon for host, WITH_DLT_DAEMON_VSOCK_IPC should be
enabled for daemon to listen on incoming VSOCK requests. Local
communication method between applications and daemon is still determined
with DLT_IPC. When building for guest, WITH_DLT_LIB_VSOCK_IPC should be
enabled and DLT_IPC will be ignored, which will make libdlt open a VSOCK
socket to the deamon for logging messages.
VSOCK can be tested without a virtual machine. Since VMADDR_CID_HOST is
used by libdlt when connecting, see vsock man page, clients can be run
on host to test VSOCK communication.
Some modifications has been done to be able to handle logging through
FIFO pipe and socket in the same build of dlt-daemon:
- dlt_receiver_init/free_unix_socket() is renamed to
dlt_receiver_init/free_global_buffer() and used for FIFO as well.
Also fixes memory leak since dlt_receiver_free_unix_socket() was used
regardless of whether DLT_USE_UNIX_SOCKET was defined or not.
- Pass type to dlt_receiver_init() instead of dlt_receiver_receive().
And remove preprocessor conditionals for handling
DLT_CONNECTION_APP_MSG in dlt_daemon_process_user_messages(). Also
fixes wrong enum type being passed to dlt_receiver_receive() in
dlt_client.c (DltClient::mode was used as a DltReceiverType enum but
it is a DltClientMode enum).
- Add a flag to DltDaemonApplication to indicate whether file descriptor
is "owned" by the DltDaemonApplication or not. When
dlt_daemon_application_add() is called due to message received on a
socket, fd is passed as an argument (app does not own fd). For FIFO,
a per application FIFO is opened (app owns the fd). Also fixes so that
user handle is reset for both application and all its contexts when
resetting any. Prevents fd from being used by accident after it has
been closed.
dlt_mkdir_recursive() is moved to src/daemon since it is only used in
the daemon. Minimizes use of DLT_USE_UNIX_SOCKET_IPC.
Other bugfixes:
- Call DLT_SEM_FREE() if setting socket to O_NONBLOCK fails in
src/lib/dlt_user.c:dlt_initialize_socket_connection().
- Close socket if dlt_receiver_init() fails in
src/lib/dlt_user.c:dlt_initialize_socket_connection().
Signed-off-by: Martin Ejdestig <martin.ejdestig@volvocars.com>
|
|
|
|
|
|
| |
Several IP address might be tested for connect.
Only output an error if no address succeeds at all.
Signed-off-by: Moritz Warning <moritzwarning@web.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
By calling target_include_directories() for the dlt target in src/lib/.
CMake filters out duplicate include paths. So even if the include
directories are already added with include_directories() in the top-level
CMakeLists.txt, they are not duplicated when the compiler is invoked.
For example, with this patch, the following works:
[~/Source/foo]$ ls
bar CMakeLists.txt dlt-daemon
[~/Source/foo]$ cat CMakeLists.txt
cmake_minimum_required(VERSION 3.3 FATAL_ERROR)
project(foo)
add_subdirectory(dlt-daemon)
add_subdirectory(bar)
[~/Source/foo]$ cat bar/CMakeLists.txt
cmake_minimum_required(VERSION 3.3 FATAL_ERROR)
project(bar)
add_executable(bar main.cpp)
target_link_libraries(bar dlt)
install(TARGETS bar RUNTIME DESTINATION bin)
bar/main.cpp contains the example from the top of
doc/dlt_for_developers.md that does "#include <dlt.h>" and then uses the
DLT logging macros.
Signed-off-by: Martin Ejdestig <martin.ejdestig@volvocars.com>
|
|
|
|
|
|
|
|
|
| |
* Add UDP multicast support on client side
UDP multicast support is already present on server side. This
patch add seemless support for UDP multicast on client side
in dlt-receive.
Signed-off-by: Joao Sousa <joao.sa.sousa@ctw.bmwgroup.com>
|
|
|
|
| |
Signed-off-by: KHANH LUONG HONG DUY <khanh.luonghongduy@vn.bosch.com>
|
|
|
|
| |
Signed-off-by: KHANH LUONG HONG DUY <khanh.luonghongduy@vn.bosch.com>
|
|
|
|
|
|
|
| |
align variable names with cmake 3.3 change.
=> DLT_VERSION* -> PROJECT_VERSION*
Signed-off-by: Felix Herrmann <fherrmann@de.adit-jv.com>
|
|
|
|
|
|
|
| |
Relocate the setting of dltFifoBaseDir variable from dlt_init() to
dlt_check_envvar()
Signed-off-by: LUONG HONG DUY KHANH(RBVH/ENG42) <KHANH.LUONGHONGDUY@vn.bosch.com>
|
|
|
|
|
|
|
|
|
|
| |
There is some OS (e.g. Android) which doesn't support message queue.
Since network trace uses it as IPC, we need to disable it if following
calls are not available:
mq_open, mq_close, mq_unlink, mq_send, mq_receive
Signed-off-by: Saya Sugiura <ssugiura@jp.adit-jv.com>
Signed-off-by: KHANH LUONG HONG DUY <khanh.luonghongduy@vn.bosch.com>
|
|
|
|
| |
Signed-off-by: LUONG HONG DUY KHANH(RBVH/ENG42) <KHANH.LUONGHONGDUY@vn.bosch.com>
|
|
|
|
|
|
|
|
|
| |
Many stringop-truncation and stringop-overflow warnings are still
there (so many).
https://developers.redhat.com/blog/2018/05/24/detecting-string-truncation-with-gcc-8/
Signed-off-by: Felix Herrmann <fherrmann@de.adit-jv.com>
Signed-off-by: KHANH LUONG HONG DUY <khanh.luonghongduy@vn.bosch.com>
|