From 75e79040e5f8338f6c83f487b69568a55cf9f304 Mon Sep 17 00:00:00 2001 From: "Jeremiah C. Foster" Date: Wed, 7 Sep 2011 18:09:21 +0200 Subject: Added debian directory. --- debian/README.Debian | 21 + debian/README.source | 9 + debian/changelog | 7 + debian/compat | 1 + debian/control | 24 + debian/copyright | 90 ++ debian/docs | 8 + debian/init.d | 154 ++++ debian/manpage.1 | 59 ++ debian/patches/debian-changes-2.2.0-1 | 1627 +++++++++++++++++++++++++++++++++ debian/patches/series | 1 + debian/rules | 13 + debian/source/format | 1 + debian/watch | 23 + 14 files changed, 2038 insertions(+) create mode 100755 debian/README.Debian create mode 100755 debian/README.source create mode 100755 debian/changelog create mode 100755 debian/compat create mode 100755 debian/control create mode 100755 debian/copyright create mode 100755 debian/docs create mode 100755 debian/init.d create mode 100755 debian/manpage.1 create mode 100644 debian/patches/debian-changes-2.2.0-1 create mode 100644 debian/patches/series create mode 100755 debian/rules create mode 100755 debian/source/format create mode 100755 debian/watch diff --git a/debian/README.Debian b/debian/README.Debian new file mode 100755 index 0000000..cd05fd7 --- /dev/null +++ b/debian/README.Debian @@ -0,0 +1,21 @@ +dlt-daemon for Debian +--------------------- +This document describes how you build the DLT-viewer and DLT-daemon +software from GENIVI. This document applies to the Cassini version +of DLT. + +The sources for DLT-daemon and DLT-viewer are held in the git repos +at GENIVI which require a log in. Check out the repos this way; + +$ git clone https://git.genivi.org/srv/git/DLT-daemon +$ git clone https://git.genivi.org/srv/git/DLT-viewer + +DLT uses cmake as part of its build system which means you'll need +cmake installed on your build machine in order to build using cmake. + +$ mkdir build && cd build +$ cmake ../ +$ make +$ make install + + -- jeremiah Tue, 16 Aug 2011 02:31:49 -0900 \ No newline at end of file diff --git a/debian/README.source b/debian/README.source new file mode 100755 index 0000000..6ac6a6d --- /dev/null +++ b/debian/README.source @@ -0,0 +1,9 @@ +dlt-daemon for Debian +--------------------- + + + + + + diff --git a/debian/changelog b/debian/changelog new file mode 100755 index 0000000..9b94b76 --- /dev/null +++ b/debian/changelog @@ -0,0 +1,7 @@ +dlt-daemon (2.2.0-1) unstable; urgency=low + + * Initial GENIVI release for x86 + + Currently no way to automatically close bugs via changelog + in GENIVI. + + -- jeremiah Tue, 7 Sept 2011 02:31:49 -0900 diff --git a/debian/compat b/debian/compat new file mode 100755 index 0000000..7f8f011 --- /dev/null +++ b/debian/compat @@ -0,0 +1 @@ +7 diff --git a/debian/control b/debian/control new file mode 100755 index 0000000..801167e --- /dev/null +++ b/debian/control @@ -0,0 +1,24 @@ +Source: dlt-daemon +Section: autmotive +Priority: extra +Maintainer: Alexander Wenzel +Uploaders: jeremiah.foster@pelagicore.com +Build-Depends: debhelper (>= 7.0.50~), cmake +Standards-Version: 3.9.1 +Homepage: https://collab.genivi.org/wiki/display/geniviproj/Automotive+DLT+%28Diagnostic+Log+and+Trace%29 +Vcs-Git: https://git.genivi.org/srv/git/dlt-daemon +Vcs-Browser: https://git.genivi.org/git/gitweb.cgi?p=DLT-daemon;a=summary + +Package: dlt-daemon +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: The daemon part of Diagnostic Log and Trace + Diagnostic Log and Trace is the standard diagnostic log and + trace mechanism used within GENIVI. DLT is based on the + AUTOSAR 4.0 DLT standard + . + DLT Daemon is the central software component, which receives all log + and trace messages, controls the log levels and forwards the log + and trace messages to the DLT Client + + diff --git a/debian/copyright b/debian/copyright new file mode 100755 index 0000000..9b46480 --- /dev/null +++ b/debian/copyright @@ -0,0 +1,90 @@ +Format: http://dep.debian.net/deps/dep5 +Upstream-Name: dlt-daemon +Source: https://git.genivi.org/git/gitweb.cgi?p=DLT-daemon;a=summary + +Files: * +Copyright: 2011 BMW AG - Alexander Wenzel + +License: LGPL + +Files: debian/* +Copyright: 2011 Jeremiah C. Foster +Copyright: 2011 GENIVI Alliance +License: LGPL + +License: LGPL + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + . + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + . + [This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + . + Preamble + . + The licenses for most software are designed to take away your + freedom to share and change it. By contrast, the GNU General Public + Licenses are intended to guarantee your freedom to share and change + free software--to make sure the software is free for all its users. + . + This license, the Lesser General Public License, applies to some + specially designated software packages--typically libraries--of the + Free Software Foundation and other authors who decide to use it. You + can use it too, but we suggest you first think carefully about whether + this license or the ordinary General Public License is the better + strategy to use in any particular case, based on the explanations below. + . + When we speak of free software, we are referring to freedom of use, + not price. Our General Public Licenses are designed to make sure that + you have the freedom to distribute copies of free software (and charge + for this service if you wish); that you receive source code or can get + it if you want it; that you can change the software and use pieces of + it in new free programs; and that you are informed that you can do + these things. + . + To protect your rights, we need to make restrictions that forbid + distributors to deny you these rights or to ask you to surrender these + rights. These restrictions translate to certain responsibilities for + you if you distribute copies of the library or if you modify it. + . + For example, if you distribute copies of the library, whether gratis + or for a fee, you must give the recipients all the rights that we gave + you. You must make sure that they, too, receive or can get the source + code. If you link other code with the library, you must provide + complete object files to the recipients, so that they can relink them + with the library after making changes to the library and recompiling + it. And you must show them these terms so they know their rights. + . + We protect your rights with a two-step method: (1) we copyright the + library, and (2) we offer you this license, which gives you legal + permission to copy, distribute and/or modify the library. + . + To protect each distributor, we want to make it very clear that + there is no warranty for the free library. Also, if the library is + modified by someone else and passed on, the recipients should know + that what they have is not the original version, so that the original + author's reputation will not be affected by problems that might be + introduced by others. + . + Finally, software patents pose a constant threat to the existence of + any free program. We wish to make sure that a company cannot + effectively restrict the users of a free program by obtaining a + restrictive license from a patent holder. Therefore, we insist that + any patent license obtained for a version of the library must be + consistent with the full freedom of use specified in this license. + . + Most GNU software, including some libraries, is covered by the + ordinary GNU General Public License. This license, the GNU Lesser + General Public License, applies to certain designated libraries, and + is quite different from the ordinary General Public License. We use + this license for certain libraries in order to permit linking those + libraries into non-free programs. + . + See the LGPL.txt document for more. + \ No newline at end of file diff --git a/debian/docs b/debian/docs new file mode 100755 index 0000000..8775bfb --- /dev/null +++ b/debian/docs @@ -0,0 +1,8 @@ +INSTALL.txt +LGPL.txt +LICENSE.txt +README +README.txt +README.txt +ReleaseNotes.txt +TODO diff --git a/debian/init.d b/debian/init.d new file mode 100755 index 0000000..3bcd8bb --- /dev/null +++ b/debian/init.d @@ -0,0 +1,154 @@ +#!/bin/sh +### BEGIN INIT INFO +# Provides: dlt-daemon +# Required-Start: $network $local_fs +# Required-Stop: +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: +# Description: +# <...> +# <...> +### END INIT INFO + +# Author: root + +# PATH should only include /usr/* if it runs after the mountnfs.sh script +PATH=/sbin:/usr/sbin:/bin:/usr/bin +DESC=dlt-daemon # Introduce a short description here +NAME=dlt-daemon # Introduce the short server's name here +DAEMON=/usr/sbin/dlt-daemon # Introduce the server's location here +DAEMON_ARGS="" # Arguments to run the daemon with +PIDFILE=/var/run/$NAME.pid +SCRIPTNAME=/etc/init.d/$NAME + +# Exit if the package is not installed +[ -x $DAEMON ] || exit 0 + +# Read configuration variable file if it is present +[ -r /etc/default/$NAME ] && . /etc/default/$NAME + +# Load the VERBOSE setting and other rcS variables +. /lib/init/vars.sh + +# Define LSB log_* functions. +# Depend on lsb-base (>= 3.0-6) to ensure that this file is present. +. /lib/lsb/init-functions + +# +# Function that starts the daemon/service +# +do_start() +{ + # Return + # 0 if daemon has been started + # 1 if daemon was already running + # 2 if daemon could not be started + start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ + || return 1 + start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \ + $DAEMON_ARGS \ + || return 2 + # Add code here, if necessary, that waits for the process to be ready + # to handle requests from services started subsequently which depend + # on this one. As a last resort, sleep for some time. +} + +# +# Function that stops the daemon/service +# +do_stop() +{ + # Return + # 0 if daemon has been stopped + # 1 if daemon was already stopped + # 2 if daemon could not be stopped + # other if a failure occurred + start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME + RETVAL="$?" + [ "$RETVAL" = 2 ] && return 2 + # Wait for children to finish too if this is a daemon that forks + # and if the daemon is only ever run from this initscript. + # If the above conditions are not satisfied then add some other code + # that waits for the process to drop all resources that could be + # needed by services started subsequently. A last resort is to + # sleep for some time. + start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON + [ "$?" = 2 ] && return 2 + # Many daemons don't delete their pidfiles when they exit. + rm -f $PIDFILE + return "$RETVAL" +} + +# +# Function that sends a SIGHUP to the daemon/service +# +do_reload() { + # + # If the daemon can reload its configuration without + # restarting (for example, when it is sent a SIGHUP), + # then implement that here. + # + start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME + return 0 +} + +case "$1" in + start) + [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME" + do_start + case "$?" in + 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; + 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; + esac + ;; + stop) + [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" + do_stop + case "$?" in + 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; + 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; + esac + ;; + status) + status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? + ;; + #reload|force-reload) + # + # If do_reload() is not implemented then leave this commented out + # and leave 'force-reload' as an alias for 'restart'. + # + #log_daemon_msg "Reloading $DESC" "$NAME" + #do_reload + #log_end_msg $? + #;; + restart|force-reload) + # + # If the "reload" option is implemented then remove the + # 'force-reload' alias + # + log_daemon_msg "Restarting $DESC" "$NAME" + do_stop + case "$?" in + 0|1) + do_start + case "$?" in + 0) log_end_msg 0 ;; + 1) log_end_msg 1 ;; # Old process is still running + *) log_end_msg 1 ;; # Failed to start + esac + ;; + *) + # Failed to stop + log_end_msg 1 + ;; + esac + ;; + *) + #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 + echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 + exit 3 + ;; +esac + +: diff --git a/debian/manpage.1 b/debian/manpage.1 new file mode 100755 index 0000000..e38ab30 --- /dev/null +++ b/debian/manpage.1 @@ -0,0 +1,59 @@ +.\" Hey, EMACS: -*- nroff -*- +.\" First parameter, NAME, should be all caps +.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection +.\" other parameters are allowed: see man(7), man(1) +.TH DLT-DAEMON SECTION "August 16, 2011" +.\" Please adjust this date whenever revising the manpage. +.\" +.\" Some roff macros, for reference: +.\" .nh disable hyphenation +.\" .hy enable hyphenation +.\" .ad l left justify +.\" .ad b justify to both left and right margins +.\" .nf disable filling +.\" .fi enable filling +.\" .br insert line break +.\" .sp insert n+1 empty lines +.\" for manpage-specific macros, see man(7) +.SH NAME +dlt-daemon \- program to do something +.SH SYNOPSIS +.B dlt-daemon +.RI [ options ] " files" ... +.br +.B bar +.RI [ options ] " files" ... +.SH DESCRIPTION +This manual page documents briefly the +.B dlt-daemon +and +.B bar +commands. +.PP +.\" TeX users may be more comfortable with the \fB\fP and +.\" \fI\fP escape sequences to invode bold face and italics, +.\" respectively. +\fBdlt-daemon\fP is a program that... +.SH OPTIONS +These programs follow the usual GNU command line syntax, with long +options starting with two dashes (`-'). +A summary of options is included below. +For a complete description, see the Info files. +.TP +.B \-h, \-\-help +Show summary of options. +.TP +.B \-v, \-\-version +Show version of program. +.SH SEE ALSO +.BR bar (1), +.BR baz (1). +.br +The programs are documented fully by +.IR "The Rise and Fall of a Fooish Bar" , +available via the Info system. +.SH AUTHOR +dlt-daemon was written by . +.PP +This manual page was written by root , +for the Debian project (and may be used by others). diff --git a/debian/patches/debian-changes-2.2.0-1 b/debian/patches/debian-changes-2.2.0-1 new file mode 100644 index 0000000..ca63c87 --- /dev/null +++ b/debian/patches/debian-changes-2.2.0-1 @@ -0,0 +1,1627 @@ +Description: Upstream changes introduced in version 2.2.0-1 + This patch has been created by dpkg-source during the package build. + Here's the last changelog entry, hopefully it gives details on why + those changes were made: + . + dlt-daemon (2.2.0-1) unstable; urgency=low + . + * Initial GENIVI release + + Currently no way to automatically close bugs via changelog + in GENIVI. + . + The person named in the Author field signed this changelog entry. +Author: jeremiah + +--- +The information above should follow the Patch Tagging Guidelines, please +checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here +are templates for supplementary fields that you might want to add: + +Origin: , +Bug: +Bug-Debian: http://bugs.debian.org/ +Bug-Ubuntu: https://launchpad.net/bugs/ +Forwarded: +Reviewed-By: +Last-Update: + +--- /dev/null ++++ dlt-daemon-2.2.0/automotive-dlt.pc +@@ -0,0 +1,12 @@ ++prefix=/usr ++exec_prefix=/usr ++libdir=${exec_prefix}/lib ++includedir=${exec_prefix}/include ++ ++Name: DLT ++Description: Diagnostic Log and Trace ++Version: 2.2.0 ++Requires: ++Libs: -L${libdir} -ldlt -lrt -lpthread ++Cflags: -I${includedir}/dlt -DDLT_2_2 ++ +--- /dev/null ++++ dlt-daemon-2.2.0/doxygen.cfg +@@ -0,0 +1,1530 @@ ++# Doxyfile 1.5.8 ++ ++# This file describes the settings to be used by the documentation system ++# doxygen (www.doxygen.org) for a project ++# ++# All text after a hash (#) is considered a comment and will be ignored ++# The format is: ++# TAG = value [value, ...] ++# For lists items can also be appended using: ++# TAG += value [value, ...] ++# Values that contain spaces should be placed between quotes (" ") ++ ++#--------------------------------------------------------------------------- ++# Project related configuration options ++#--------------------------------------------------------------------------- ++ ++# This tag specifies the encoding used for all characters in the config file ++# that follow. The default is UTF-8 which is also the encoding used for all ++# text before the first occurrence of this tag. Doxygen uses libiconv (or the ++# iconv built into libc) for the transcoding. See ++# http://www.gnu.org/software/libiconv for the list of possible encodings. ++ ++DOXYFILE_ENCODING = UTF-8 ++ ++# The PROJECT_NAME tag is a single word (or a sequence of words surrounded ++# by quotes) that should identify the project. ++ ++PROJECT_NAME = ++ ++# The PROJECT_NUMBER tag can be used to enter a project or revision number. ++# This could be handy for archiving the generated documentation or ++# if some version control system is used. ++ ++PROJECT_NUMBER = ++ ++# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) ++# base path where the generated documentation will be put. ++# If a relative path is entered, it will be relative to the location ++# where doxygen was started. If left blank the current directory will be used. ++ ++OUTPUT_DIRECTORY = doc ++ ++# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create ++# 4096 sub-directories (in 2 levels) under the output directory of each output ++# format and will distribute the generated files over these directories. ++# Enabling this option can be useful when feeding doxygen a huge amount of ++# source files, where putting all generated files in the same directory would ++# otherwise cause performance problems for the file system. ++ ++CREATE_SUBDIRS = NO ++ ++# The OUTPUT_LANGUAGE tag is used to specify the language in which all ++# documentation generated by doxygen is written. Doxygen will use this ++# information to generate all constant output in the proper language. ++# The default language is English, other supported languages are: ++# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, ++# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, ++# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), ++# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, ++# Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene, ++# Spanish, Swedish, and Ukrainian. ++ ++OUTPUT_LANGUAGE = English ++ ++# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will ++# include brief member descriptions after the members that are listed in ++# the file and class documentation (similar to JavaDoc). ++# Set to NO to disable this. ++ ++BRIEF_MEMBER_DESC = YES ++ ++# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend ++# the brief description of a member or function before the detailed description. ++# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the ++# brief descriptions will be completely suppressed. ++ ++REPEAT_BRIEF = YES ++ ++# This tag implements a quasi-intelligent brief description abbreviator ++# that is used to form the text in various listings. Each string ++# in this list, if found as the leading text of the brief description, will be ++# stripped from the text and the result after processing the whole list, is ++# used as the annotated text. Otherwise, the brief description is used as-is. ++# If left blank, the following values are used ("$name" is automatically ++# replaced with the name of the entity): "The $name class" "The $name widget" ++# "The $name file" "is" "provides" "specifies" "contains" ++# "represents" "a" "an" "the" ++ ++ABBREVIATE_BRIEF = "The $name class" \ ++ "The $name widget" \ ++ "The $name file" \ ++ is \ ++ provides \ ++ specifies \ ++ contains \ ++ represents \ ++ a \ ++ an \ ++ the ++ ++# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then ++# Doxygen will generate a detailed section even if there is only a brief ++# description. ++ ++ALWAYS_DETAILED_SEC = NO ++ ++# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all ++# inherited members of a class in the documentation of that class as if those ++# members were ordinary class members. Constructors, destructors and assignment ++# operators of the base classes will not be shown. ++ ++INLINE_INHERITED_MEMB = NO ++ ++# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full ++# path before files name in the file list and in the header files. If set ++# to NO the shortest path that makes the file name unique will be used. ++ ++FULL_PATH_NAMES = YES ++ ++# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag ++# can be used to strip a user-defined part of the path. Stripping is ++# only done if one of the specified strings matches the left-hand part of ++# the path. The tag can be used to show relative paths in the file list. ++# If left blank the directory from which doxygen is run is used as the ++# path to strip. ++ ++STRIP_FROM_PATH = ++ ++# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of ++# the path mentioned in the documentation of a class, which tells ++# the reader which header file to include in order to use a class. ++# If left blank only the name of the header file containing the class ++# definition is used. Otherwise one should specify the include paths that ++# are normally passed to the compiler using the -I flag. ++ ++STRIP_FROM_INC_PATH = ++ ++# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter ++# (but less readable) file names. This can be useful is your file systems ++# doesn't support long names like on DOS, Mac, or CD-ROM. ++ ++SHORT_NAMES = NO ++ ++# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen ++# will interpret the first line (until the first dot) of a JavaDoc-style ++# comment as the brief description. If set to NO, the JavaDoc ++# comments will behave just like regular Qt-style comments ++# (thus requiring an explicit @brief command for a brief description.) ++ ++JAVADOC_AUTOBRIEF = NO ++ ++# If the QT_AUTOBRIEF tag is set to YES then Doxygen will ++# interpret the first line (until the first dot) of a Qt-style ++# comment as the brief description. If set to NO, the comments ++# will behave just like regular Qt-style comments (thus requiring ++# an explicit \brief command for a brief description.) ++ ++QT_AUTOBRIEF = NO ++ ++# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen ++# treat a multi-line C++ special comment block (i.e. a block of //! or /// ++# comments) as a brief description. This used to be the default behaviour. ++# The new default is to treat a multi-line C++ comment block as a detailed ++# description. Set this tag to YES if you prefer the old behaviour instead. ++ ++MULTILINE_CPP_IS_BRIEF = NO ++ ++# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented ++# member inherits the documentation from any documented member that it ++# re-implements. ++ ++INHERIT_DOCS = YES ++ ++# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce ++# a new page for each member. If set to NO, the documentation of a member will ++# be part of the file/class/namespace that contains it. ++ ++SEPARATE_MEMBER_PAGES = NO ++ ++# The TAB_SIZE tag can be used to set the number of spaces in a tab. ++# Doxygen uses this value to replace tabs by spaces in code fragments. ++ ++TAB_SIZE = 8 ++ ++# This tag can be used to specify a number of aliases that acts ++# as commands in the documentation. An alias has the form "name=value". ++# For example adding "sideeffect=\par Side Effects:\n" will allow you to ++# put the command \sideeffect (or @sideeffect) in the documentation, which ++# will result in a user-defined paragraph with heading "Side Effects:". ++# You can put \n's in the value part of an alias to insert newlines. ++ ++ALIASES = ++ ++# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C ++# sources only. Doxygen will then generate output that is more tailored for C. ++# For instance, some of the names that are used will be different. The list ++# of all members will be omitted, etc. ++ ++OPTIMIZE_OUTPUT_FOR_C = YES ++ ++# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java ++# sources only. Doxygen will then generate output that is more tailored for ++# Java. For instance, namespaces will be presented as packages, qualified ++# scopes will look different, etc. ++ ++OPTIMIZE_OUTPUT_JAVA = NO ++ ++# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran ++# sources only. Doxygen will then generate output that is more tailored for ++# Fortran. ++ ++OPTIMIZE_FOR_FORTRAN = NO ++ ++# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL ++# sources. Doxygen will then generate output that is tailored for ++# VHDL. ++ ++OPTIMIZE_OUTPUT_VHDL = NO ++ ++# Doxygen selects the parser to use depending on the extension of the files it parses. ++# With this tag you can assign which parser to use for a given extension. ++# Doxygen has a built-in mapping, but you can override or extend it using this tag. ++# The format is ext=language, where ext is a file extension, and language is one of ++# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, ++# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat ++# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), ++# use: inc=Fortran f=C ++ ++EXTENSION_MAPPING = ++ ++# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want ++# to include (a tag file for) the STL sources as input, then you should ++# set this tag to YES in order to let doxygen match functions declarations and ++# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. ++# func(std::string) {}). This also make the inheritance and collaboration ++# diagrams that involve STL classes more complete and accurate. ++ ++BUILTIN_STL_SUPPORT = NO ++ ++# If you use Microsoft's C++/CLI language, you should set this option to YES to ++# enable parsing support. ++ ++CPP_CLI_SUPPORT = NO ++ ++# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. ++# Doxygen will parse them like normal C++ but will assume all classes use public ++# instead of private inheritance when no explicit protection keyword is present. ++ ++SIP_SUPPORT = NO ++ ++# For Microsoft's IDL there are propget and propput attributes to indicate getter ++# and setter methods for a property. Setting this option to YES (the default) ++# will make doxygen to replace the get and set methods by a property in the ++# documentation. This will only work if the methods are indeed getting or ++# setting a simple type. If this is not the case, or you want to show the ++# methods anyway, you should set this option to NO. ++ ++IDL_PROPERTY_SUPPORT = NO ++ ++# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC ++# tag is set to YES, then doxygen will reuse the documentation of the first ++# member in the group (if any) for the other members of the group. By default ++# all members of a group must be documented explicitly. ++ ++DISTRIBUTE_GROUP_DOC = NO ++ ++# Set the SUBGROUPING tag to YES (the default) to allow class member groups of ++# the same type (for instance a group of public functions) to be put as a ++# subgroup of that type (e.g. under the Public Functions section). Set it to ++# NO to prevent subgrouping. Alternatively, this can be done per class using ++# the \nosubgrouping command. ++ ++SUBGROUPING = YES ++ ++# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum ++# is documented as struct, union, or enum with the name of the typedef. So ++# typedef struct TypeS {} TypeT, will appear in the documentation as a struct ++# with name TypeT. When disabled the typedef will appear as a member of a file, ++# namespace, or class. And the struct will be named TypeS. This can typically ++# be useful for C code in case the coding convention dictates that all compound ++# types are typedef'ed and only the typedef is referenced, never the tag name. ++ ++TYPEDEF_HIDES_STRUCT = NO ++ ++# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to ++# determine which symbols to keep in memory and which to flush to disk. ++# When the cache is full, less often used symbols will be written to disk. ++# For small to medium size projects (<1000 input files) the default value is ++# probably good enough. For larger projects a too small cache size can cause ++# doxygen to be busy swapping symbols to and from disk most of the time ++# causing a significant performance penality. ++# If the system has enough physical memory increasing the cache will improve the ++# performance by keeping more symbols in memory. Note that the value works on ++# a logarithmic scale so increasing the size by one will rougly double the ++# memory usage. The cache size is given by this formula: ++# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, ++# corresponding to a cache size of 2^16 = 65536 symbols ++ ++SYMBOL_CACHE_SIZE = 0 ++ ++#--------------------------------------------------------------------------- ++# Build related configuration options ++#--------------------------------------------------------------------------- ++ ++# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in ++# documentation are documented, even if no documentation was available. ++# Private class members and static file members will be hidden unless ++# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES ++ ++EXTRACT_ALL = YES ++ ++# If the EXTRACT_PRIVATE tag is set to YES all private members of a class ++# will be included in the documentation. ++ ++EXTRACT_PRIVATE = YES ++ ++# If the EXTRACT_STATIC tag is set to YES all static members of a file ++# will be included in the documentation. ++ ++EXTRACT_STATIC = YES ++ ++# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) ++# defined locally in source files will be included in the documentation. ++# If set to NO only classes defined in header files are included. ++ ++EXTRACT_LOCAL_CLASSES = YES ++ ++# This flag is only useful for Objective-C code. When set to YES local ++# methods, which are defined in the implementation section but not in ++# the interface are included in the documentation. ++# If set to NO (the default) only methods in the interface are included. ++ ++EXTRACT_LOCAL_METHODS = NO ++ ++# If this flag is set to YES, the members of anonymous namespaces will be ++# extracted and appear in the documentation as a namespace called ++# 'anonymous_namespace{file}', where file will be replaced with the base ++# name of the file that contains the anonymous namespace. By default ++# anonymous namespace are hidden. ++ ++EXTRACT_ANON_NSPACES = NO ++ ++# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all ++# undocumented members of documented classes, files or namespaces. ++# If set to NO (the default) these members will be included in the ++# various overviews, but no documentation section is generated. ++# This option has no effect if EXTRACT_ALL is enabled. ++ ++HIDE_UNDOC_MEMBERS = NO ++ ++# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all ++# undocumented classes that are normally visible in the class hierarchy. ++# If set to NO (the default) these classes will be included in the various ++# overviews. This option has no effect if EXTRACT_ALL is enabled. ++ ++HIDE_UNDOC_CLASSES = NO ++ ++# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all ++# friend (class|struct|union) declarations. ++# If set to NO (the default) these declarations will be included in the ++# documentation. ++ ++HIDE_FRIEND_COMPOUNDS = NO ++ ++# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any ++# documentation blocks found inside the body of a function. ++# If set to NO (the default) these blocks will be appended to the ++# function's detailed documentation block. ++ ++HIDE_IN_BODY_DOCS = NO ++ ++# The INTERNAL_DOCS tag determines if documentation ++# that is typed after a \internal command is included. If the tag is set ++# to NO (the default) then the documentation will be excluded. ++# Set it to YES to include the internal documentation. ++ ++INTERNAL_DOCS = YES ++ ++# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate ++# file names in lower-case letters. If set to YES upper-case letters are also ++# allowed. This is useful if you have classes or files whose names only differ ++# in case and if your file system supports case sensitive file names. Windows ++# and Mac users are advised to set this option to NO. ++ ++CASE_SENSE_NAMES = NO ++ ++# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen ++# will show members with their full class and namespace scopes in the ++# documentation. If set to YES the scope will be hidden. ++ ++HIDE_SCOPE_NAMES = NO ++ ++# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen ++# will put a list of the files that are included by a file in the documentation ++# of that file. ++ ++SHOW_INCLUDE_FILES = YES ++ ++# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] ++# is inserted in the documentation for inline members. ++ ++INLINE_INFO = YES ++ ++# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen ++# will sort the (detailed) documentation of file and class members ++# alphabetically by member name. If set to NO the members will appear in ++# declaration order. ++ ++SORT_MEMBER_DOCS = YES ++ ++# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the ++# brief documentation of file, namespace and class members alphabetically ++# by member name. If set to NO (the default) the members will appear in ++# declaration order. ++ ++SORT_BRIEF_DOCS = NO ++ ++# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the ++# hierarchy of group names into alphabetical order. If set to NO (the default) ++# the group names will appear in their defined order. ++ ++SORT_GROUP_NAMES = NO ++ ++# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be ++# sorted by fully-qualified names, including namespaces. If set to ++# NO (the default), the class list will be sorted only by class name, ++# not including the namespace part. ++# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. ++# Note: This option applies only to the class list, not to the ++# alphabetical list. ++ ++SORT_BY_SCOPE_NAME = NO ++ ++# The GENERATE_TODOLIST tag can be used to enable (YES) or ++# disable (NO) the todo list. This list is created by putting \todo ++# commands in the documentation. ++ ++GENERATE_TODOLIST = YES ++ ++# The GENERATE_TESTLIST tag can be used to enable (YES) or ++# disable (NO) the test list. This list is created by putting \test ++# commands in the documentation. ++ ++GENERATE_TESTLIST = YES ++ ++# The GENERATE_BUGLIST tag can be used to enable (YES) or ++# disable (NO) the bug list. This list is created by putting \bug ++# commands in the documentation. ++ ++GENERATE_BUGLIST = YES ++ ++# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or ++# disable (NO) the deprecated list. This list is created by putting ++# \deprecated commands in the documentation. ++ ++GENERATE_DEPRECATEDLIST= YES ++ ++# The ENABLED_SECTIONS tag can be used to enable conditional ++# documentation sections, marked by \if sectionname ... \endif. ++ ++ENABLED_SECTIONS = ++ ++# The MAX_INITIALIZER_LINES tag determines the maximum number of lines ++# the initial value of a variable or define consists of for it to appear in ++# the documentation. If the initializer consists of more lines than specified ++# here it will be hidden. Use a value of 0 to hide initializers completely. ++# The appearance of the initializer of individual variables and defines in the ++# documentation can be controlled using \showinitializer or \hideinitializer ++# command in the documentation regardless of this setting. ++ ++MAX_INITIALIZER_LINES = 30 ++ ++# Set the SHOW_USED_FILES tag to NO to disable the list of files generated ++# at the bottom of the documentation of classes and structs. If set to YES the ++# list will mention the files that were used to generate the documentation. ++ ++SHOW_USED_FILES = YES ++ ++# If the sources in your project are distributed over multiple directories ++# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy ++# in the documentation. The default is NO. ++ ++SHOW_DIRECTORIES = NO ++ ++# Set the SHOW_FILES tag to NO to disable the generation of the Files page. ++# This will remove the Files entry from the Quick Index and from the ++# Folder Tree View (if specified). The default is YES. ++ ++SHOW_FILES = YES ++ ++# Set the SHOW_NAMESPACES tag to NO to disable the generation of the ++# Namespaces page. This will remove the Namespaces entry from the Quick Index ++# and from the Folder Tree View (if specified). The default is YES. ++ ++SHOW_NAMESPACES = YES ++ ++# The FILE_VERSION_FILTER tag can be used to specify a program or script that ++# doxygen should invoke to get the current version for each file (typically from ++# the version control system). Doxygen will invoke the program by executing (via ++# popen()) the command , where is the value of ++# the FILE_VERSION_FILTER tag, and is the name of an input file ++# provided by doxygen. Whatever the program writes to standard output ++# is used as the file version. See the manual for examples. ++ ++FILE_VERSION_FILTER = ++ ++# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by ++# doxygen. The layout file controls the global structure of the generated output files ++# in an output format independent way. The create the layout file that represents ++# doxygen's defaults, run doxygen with the -l option. You can optionally specify a ++# file name after the option, if omitted DoxygenLayout.xml will be used as the name ++# of the layout file. ++ ++LAYOUT_FILE = ++ ++#--------------------------------------------------------------------------- ++# configuration options related to warning and progress messages ++#--------------------------------------------------------------------------- ++ ++# The QUIET tag can be used to turn on/off the messages that are generated ++# by doxygen. Possible values are YES and NO. If left blank NO is used. ++ ++QUIET = NO ++ ++# The WARNINGS tag can be used to turn on/off the warning messages that are ++# generated by doxygen. Possible values are YES and NO. If left blank ++# NO is used. ++ ++WARNINGS = YES ++ ++# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings ++# for undocumented members. If EXTRACT_ALL is set to YES then this flag will ++# automatically be disabled. ++ ++WARN_IF_UNDOCUMENTED = YES ++ ++# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for ++# potential errors in the documentation, such as not documenting some ++# parameters in a documented function, or documenting parameters that ++# don't exist or using markup commands wrongly. ++ ++WARN_IF_DOC_ERROR = YES ++ ++# This WARN_NO_PARAMDOC option can be abled to get warnings for ++# functions that are documented, but have no documentation for their parameters ++# or return value. If set to NO (the default) doxygen will only warn about ++# wrong or incomplete parameter documentation, but not about the absence of ++# documentation. ++ ++WARN_NO_PARAMDOC = NO ++ ++# The WARN_FORMAT tag determines the format of the warning messages that ++# doxygen can produce. The string should contain the $file, $line, and $text ++# tags, which will be replaced by the file and line number from which the ++# warning originated and the warning text. Optionally the format may contain ++# $version, which will be replaced by the version of the file (if it could ++# be obtained via FILE_VERSION_FILTER) ++ ++WARN_FORMAT = "$file:$line: $text" ++ ++# The WARN_LOGFILE tag can be used to specify a file to which warning ++# and error messages should be written. If left blank the output is written ++# to stderr. ++ ++WARN_LOGFILE = ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the input files ++#--------------------------------------------------------------------------- ++ ++# The INPUT tag can be used to specify the files and/or directories that contain ++# documented source files. You may enter file names like "myfile.cpp" or ++# directories like "/usr/src/myproject". Separate the files or directories ++# with spaces. ++ ++INPUT = src/ include/ ++ ++# This tag can be used to specify the character encoding of the source files ++# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is ++# also the default input encoding. Doxygen uses libiconv (or the iconv built ++# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for ++# the list of possible encodings. ++ ++INPUT_ENCODING = UTF-8 ++ ++# If the value of the INPUT tag contains directories, you can use the ++# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp ++# and *.h) to filter out the source-files in the directories. If left ++# blank the following patterns are tested: ++# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx ++# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 ++ ++FILE_PATTERNS = *.c \ ++ *.cc \ ++ *.cxx \ ++ *.cpp \ ++ *.c++ \ ++ *.d \ ++ *.java \ ++ *.ii \ ++ *.ixx \ ++ *.ipp \ ++ *.i++ \ ++ *.inl \ ++ *.h \ ++ *.hh \ ++ *.hxx \ ++ *.hpp \ ++ *.h++ ++ ++ ++# The RECURSIVE tag can be used to turn specify whether or not subdirectories ++# should be searched for input files as well. Possible values are YES and NO. ++# If left blank NO is used. ++ ++RECURSIVE = YES ++ ++# The EXCLUDE tag can be used to specify files and/or directories that should ++# excluded from the INPUT source files. This way you can easily exclude a ++# subdirectory from a directory tree whose root is specified with the INPUT tag. ++ ++EXCLUDE = doc \ ++ examples \ ++ .git ++ ++# The EXCLUDE_SYMLINKS tag can be used select whether or not files or ++# directories that are symbolic links (a Unix filesystem feature) are excluded ++# from the input. ++ ++EXCLUDE_SYMLINKS = NO ++ ++# If the value of the INPUT tag contains directories, you can use the ++# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude ++# certain files from those directories. Note that the wildcards are matched ++# against the file with absolute path, so to exclude all test directories ++# for example use the pattern */test/* ++ ++EXCLUDE_PATTERNS = ++ ++# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names ++# (namespaces, classes, functions, etc.) that should be excluded from the ++# output. The symbol name can be a fully qualified name, a word, or if the ++# wildcard * is used, a substring. Examples: ANamespace, AClass, ++# AClass::ANamespace, ANamespace::*Test ++ ++EXCLUDE_SYMBOLS = ++ ++# The EXAMPLE_PATH tag can be used to specify one or more files or ++# directories that contain example code fragments that are included (see ++# the \include command). ++ ++EXAMPLE_PATH = ++ ++# If the value of the EXAMPLE_PATH tag contains directories, you can use the ++# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp ++# and *.h) to filter out the source-files in the directories. If left ++# blank all files are included. ++ ++EXAMPLE_PATTERNS = * ++ ++# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be ++# searched for input files to be used with the \include or \dontinclude ++# commands irrespective of the value of the RECURSIVE tag. ++# Possible values are YES and NO. If left blank NO is used. ++ ++EXAMPLE_RECURSIVE = NO ++ ++# The IMAGE_PATH tag can be used to specify one or more files or ++# directories that contain image that are included in the documentation (see ++# the \image command). ++ ++IMAGE_PATH = ++ ++# The INPUT_FILTER tag can be used to specify a program that doxygen should ++# invoke to filter for each input file. Doxygen will invoke the filter program ++# by executing (via popen()) the command , where ++# is the value of the INPUT_FILTER tag, and is the name of an ++# input file. Doxygen will then use the output that the filter program writes ++# to standard output. If FILTER_PATTERNS is specified, this tag will be ++# ignored. ++ ++INPUT_FILTER = ++ ++# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern ++# basis. Doxygen will compare the file name with each pattern and apply the ++# filter if there is a match. The filters are a list of the form: ++# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further ++# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER ++# is applied to all files. ++ ++FILTER_PATTERNS = ++ ++# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using ++# INPUT_FILTER) will be used to filter the input files when producing source ++# files to browse (i.e. when SOURCE_BROWSER is set to YES). ++ ++FILTER_SOURCE_FILES = NO ++ ++#--------------------------------------------------------------------------- ++# configuration options related to source browsing ++#--------------------------------------------------------------------------- ++ ++# If the SOURCE_BROWSER tag is set to YES then a list of source files will ++# be generated. Documented entities will be cross-referenced with these sources. ++# Note: To get rid of all source code in the generated output, make sure also ++# VERBATIM_HEADERS is set to NO. ++ ++SOURCE_BROWSER = YES ++ ++# Setting the INLINE_SOURCES tag to YES will include the body ++# of functions and classes directly in the documentation. ++ ++INLINE_SOURCES = NO ++ ++# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct ++# doxygen to hide any special comment blocks from generated source code ++# fragments. Normal C and C++ comments will always remain visible. ++ ++STRIP_CODE_COMMENTS = YES ++ ++# If the REFERENCED_BY_RELATION tag is set to YES ++# then for each documented function all documented ++# functions referencing it will be listed. ++ ++REFERENCED_BY_RELATION = YES ++ ++# If the REFERENCES_RELATION tag is set to YES ++# then for each documented function all documented entities ++# called/used by that function will be listed. ++ ++REFERENCES_RELATION = YES ++ ++# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) ++# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from ++# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will ++# link to the source code. Otherwise they will link to the documentation. ++ ++REFERENCES_LINK_SOURCE = YES ++ ++# If the USE_HTAGS tag is set to YES then the references to source code ++# will point to the HTML generated by the htags(1) tool instead of doxygen ++# built-in source browser. The htags tool is part of GNU's global source ++# tagging system (see http://www.gnu.org/software/global/global.html). You ++# will need version 4.8.6 or higher. ++ ++USE_HTAGS = NO ++ ++# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen ++# will generate a verbatim copy of the header file for each class for ++# which an include is specified. Set to NO to disable this. ++ ++VERBATIM_HEADERS = NO ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the alphabetical class index ++#--------------------------------------------------------------------------- ++ ++# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index ++# of all compounds will be generated. Enable this if the project ++# contains a lot of classes, structs, unions or interfaces. ++ ++ALPHABETICAL_INDEX = NO ++ ++# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then ++# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns ++# in which this list will be split (can be a number in the range [1..20]) ++ ++COLS_IN_ALPHA_INDEX = 5 ++ ++# In case all classes in a project start with a common prefix, all ++# classes will be put under the same header in the alphabetical index. ++# The IGNORE_PREFIX tag can be used to specify one or more prefixes that ++# should be ignored while generating the index headers. ++ ++IGNORE_PREFIX = ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the HTML output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_HTML tag is set to YES (the default) Doxygen will ++# generate HTML output. ++ ++GENERATE_HTML = YES ++ ++# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. ++# If a relative path is entered the value of OUTPUT_DIRECTORY will be ++# put in front of it. If left blank `html' will be used as the default path. ++ ++HTML_OUTPUT = html ++ ++# The HTML_FILE_EXTENSION tag can be used to specify the file extension for ++# each generated HTML page (for example: .htm,.php,.asp). If it is left blank ++# doxygen will generate files with .html extension. ++ ++HTML_FILE_EXTENSION = .html ++ ++# The HTML_HEADER tag can be used to specify a personal HTML header for ++# each generated HTML page. If it is left blank doxygen will generate a ++# standard header. ++ ++HTML_HEADER = ++ ++# The HTML_FOOTER tag can be used to specify a personal HTML footer for ++# each generated HTML page. If it is left blank doxygen will generate a ++# standard footer. ++ ++HTML_FOOTER = ++ ++# The HTML_STYLESHEET tag can be used to specify a user-defined cascading ++# style sheet that is used by each HTML page. It can be used to ++# fine-tune the look of the HTML output. If the tag is left blank doxygen ++# will generate a default style sheet. Note that doxygen will try to copy ++# the style sheet file to the HTML output directory, so don't put your own ++# stylesheet in the HTML output directory as well, or it will be erased! ++ ++HTML_STYLESHEET = ++ ++# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, ++# files or namespaces will be aligned in HTML using tables. If set to ++# NO a bullet list will be used. ++ ++HTML_ALIGN_MEMBERS = YES ++ ++# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML ++# documentation will contain sections that can be hidden and shown after the ++# page has loaded. For this to work a browser that supports ++# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox ++# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). ++ ++HTML_DYNAMIC_SECTIONS = NO ++ ++# If the GENERATE_DOCSET tag is set to YES, additional index files ++# will be generated that can be used as input for Apple's Xcode 3 ++# integrated development environment, introduced with OSX 10.5 (Leopard). ++# To create a documentation set, doxygen will generate a Makefile in the ++# HTML output directory. Running make will produce the docset in that ++# directory and running "make install" will install the docset in ++# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find ++# it at startup. ++# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. ++ ++GENERATE_DOCSET = NO ++ ++# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the ++# feed. A documentation feed provides an umbrella under which multiple ++# documentation sets from a single provider (such as a company or product suite) ++# can be grouped. ++ ++DOCSET_FEEDNAME = "Doxygen generated docs" ++ ++# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that ++# should uniquely identify the documentation set bundle. This should be a ++# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen ++# will append .docset to the name. ++ ++DOCSET_BUNDLE_ID = org.doxygen.Project ++ ++# If the GENERATE_HTMLHELP tag is set to YES, additional index files ++# will be generated that can be used as input for tools like the ++# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) ++# of the generated HTML documentation. ++ ++GENERATE_HTMLHELP = NO ++ ++# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can ++# be used to specify the file name of the resulting .chm file. You ++# can add a path in front of the file if the result should not be ++# written to the html output directory. ++ ++CHM_FILE = ++ ++# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can ++# be used to specify the location (absolute path including file name) of ++# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run ++# the HTML help compiler on the generated index.hhp. ++ ++HHC_LOCATION = ++ ++# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag ++# controls if a separate .chi index file is generated (YES) or that ++# it should be included in the master .chm file (NO). ++ ++GENERATE_CHI = NO ++ ++# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING ++# is used to encode HtmlHelp index (hhk), content (hhc) and project file ++# content. ++ ++CHM_INDEX_ENCODING = ++ ++# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag ++# controls whether a binary table of contents is generated (YES) or a ++# normal table of contents (NO) in the .chm file. ++ ++BINARY_TOC = NO ++ ++# The TOC_EXPAND flag can be set to YES to add extra items for group members ++# to the contents of the HTML help documentation and to the tree view. ++ ++TOC_EXPAND = YES ++ ++# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER ++# are set, an additional index file will be generated that can be used as input for ++# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated ++# HTML documentation. ++ ++GENERATE_QHP = NO ++ ++# If the QHG_LOCATION tag is specified, the QCH_FILE tag can ++# be used to specify the file name of the resulting .qch file. ++# The path specified is relative to the HTML output folder. ++ ++QCH_FILE = ++ ++# The QHP_NAMESPACE tag specifies the namespace to use when generating ++# Qt Help Project output. For more information please see ++# http://doc.trolltech.com/qthelpproject.html#namespace ++ ++QHP_NAMESPACE = ++ ++# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating ++# Qt Help Project output. For more information please see ++# http://doc.trolltech.com/qthelpproject.html#virtual-folders ++ ++QHP_VIRTUAL_FOLDER = doc ++ ++# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. ++# For more information please see ++# http://doc.trolltech.com/qthelpproject.html#custom-filters ++ ++QHP_CUST_FILTER_NAME = ++ ++# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see ++# Qt Help Project / Custom Filters. ++ ++QHP_CUST_FILTER_ATTRS = ++ ++# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's ++# filter section matches. ++# Qt Help Project / Filter Attributes. ++ ++QHP_SECT_FILTER_ATTRS = ++ ++# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can ++# be used to specify the location of Qt's qhelpgenerator. ++# If non-empty doxygen will try to run qhelpgenerator on the generated ++# .qhp file. ++ ++QHG_LOCATION = ++ ++# The DISABLE_INDEX tag can be used to turn on/off the condensed index at ++# top of each HTML page. The value NO (the default) enables the index and ++# the value YES disables it. ++ ++DISABLE_INDEX = NO ++ ++# This tag can be used to set the number of enum values (range [1..20]) ++# that doxygen will group on one line in the generated HTML documentation. ++ ++ENUM_VALUES_PER_LINE = 4 ++ ++# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index ++# structure should be generated to display hierarchical information. ++# If the tag value is set to FRAME, a side panel will be generated ++# containing a tree-like index structure (just like the one that ++# is generated for HTML Help). For this to work a browser that supports ++# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, ++# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are ++# probably better off using the HTML help feature. Other possible values ++# for this tag are: HIERARCHIES, which will generate the Groups, Directories, ++# and Class Hierarchy pages using a tree view instead of an ordered list; ++# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which ++# disables this behavior completely. For backwards compatibility with previous ++# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE ++# respectively. ++ ++GENERATE_TREEVIEW = ALL ++ ++# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be ++# used to set the initial width (in pixels) of the frame in which the tree ++# is shown. ++ ++TREEVIEW_WIDTH = 250 ++ ++# Use this tag to change the font size of Latex formulas included ++# as images in the HTML documentation. The default is 10. Note that ++# when you change the font size after a successful doxygen run you need ++# to manually remove any form_*.png images from the HTML output directory ++# to force them to be regenerated. ++ ++FORMULA_FONTSIZE = 10 ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the LaTeX output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will ++# generate Latex output. ++ ++GENERATE_LATEX = YES ++ ++# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. ++# If a relative path is entered the value of OUTPUT_DIRECTORY will be ++# put in front of it. If left blank `latex' will be used as the default path. ++ ++LATEX_OUTPUT = latex ++ ++# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be ++# invoked. If left blank `latex' will be used as the default command name. ++ ++LATEX_CMD_NAME = latex ++ ++# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to ++# generate index for LaTeX. If left blank `makeindex' will be used as the ++# default command name. ++ ++MAKEINDEX_CMD_NAME = makeindex ++ ++# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact ++# LaTeX documents. This may be useful for small projects and may help to ++# save some trees in general. ++ ++COMPACT_LATEX = NO ++ ++# The PAPER_TYPE tag can be used to set the paper type that is used ++# by the printer. Possible values are: a4, a4wide, letter, legal and ++# executive. If left blank a4wide will be used. ++ ++PAPER_TYPE = a4wide ++ ++# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX ++# packages that should be included in the LaTeX output. ++ ++EXTRA_PACKAGES = ++ ++# The LATEX_HEADER tag can be used to specify a personal LaTeX header for ++# the generated latex document. The header should contain everything until ++# the first chapter. If it is left blank doxygen will generate a ++# standard header. Notice: only use this tag if you know what you are doing! ++ ++LATEX_HEADER = ++ ++# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated ++# is prepared for conversion to pdf (using ps2pdf). The pdf file will ++# contain links (just like the HTML output) instead of page references ++# This makes the output suitable for online browsing using a pdf viewer. ++ ++PDF_HYPERLINKS = YES ++ ++# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of ++# plain latex in the generated Makefile. Set this option to YES to get a ++# higher quality PDF documentation. ++ ++USE_PDFLATEX = YES ++ ++# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. ++# command to the generated LaTeX files. This will instruct LaTeX to keep ++# running if errors occur, instead of asking the user for help. ++# This option is also used when generating formulas in HTML. ++ ++LATEX_BATCHMODE = NO ++ ++# If LATEX_HIDE_INDICES is set to YES then doxygen will not ++# include the index chapters (such as File Index, Compound Index, etc.) ++# in the output. ++ ++LATEX_HIDE_INDICES = NO ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the RTF output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output ++# The RTF output is optimized for Word 97 and may not look very pretty with ++# other RTF readers or editors. ++ ++GENERATE_RTF = YES ++ ++# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. ++# If a relative path is entered the value of OUTPUT_DIRECTORY will be ++# put in front of it. If left blank `rtf' will be used as the default path. ++ ++RTF_OUTPUT = rtf ++ ++# If the COMPACT_RTF tag is set to YES Doxygen generates more compact ++# RTF documents. This may be useful for small projects and may help to ++# save some trees in general. ++ ++COMPACT_RTF = NO ++ ++# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated ++# will contain hyperlink fields. The RTF file will ++# contain links (just like the HTML output) instead of page references. ++# This makes the output suitable for online browsing using WORD or other ++# programs which support those fields. ++# Note: wordpad (write) and others do not support links. ++ ++RTF_HYPERLINKS = NO ++ ++# Load stylesheet definitions from file. Syntax is similar to doxygen's ++# config file, i.e. a series of assignments. You only have to provide ++# replacements, missing definitions are set to their default value. ++ ++RTF_STYLESHEET_FILE = ++ ++# Set optional variables used in the generation of an rtf document. ++# Syntax is similar to doxygen's config file. ++ ++RTF_EXTENSIONS_FILE = ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the man page output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_MAN tag is set to YES (the default) Doxygen will ++# generate man pages ++ ++GENERATE_MAN = NO ++ ++# The MAN_OUTPUT tag is used to specify where the man pages will be put. ++# If a relative path is entered the value of OUTPUT_DIRECTORY will be ++# put in front of it. If left blank `man' will be used as the default path. ++ ++MAN_OUTPUT = man ++ ++# The MAN_EXTENSION tag determines the extension that is added to ++# the generated man pages (default is the subroutine's section .3) ++ ++MAN_EXTENSION = .3 ++ ++# If the MAN_LINKS tag is set to YES and Doxygen generates man output, ++# then it will generate one additional man file for each entity ++# documented in the real man page(s). These additional files ++# only source the real man page, but without them the man command ++# would be unable to find the correct page. The default is NO. ++ ++MAN_LINKS = NO ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the XML output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_XML tag is set to YES Doxygen will ++# generate an XML file that captures the structure of ++# the code including all documentation. ++ ++GENERATE_XML = NO ++ ++# The XML_OUTPUT tag is used to specify where the XML pages will be put. ++# If a relative path is entered the value of OUTPUT_DIRECTORY will be ++# put in front of it. If left blank `xml' will be used as the default path. ++ ++XML_OUTPUT = xml ++ ++# The XML_SCHEMA tag can be used to specify an XML schema, ++# which can be used by a validating XML parser to check the ++# syntax of the XML files. ++ ++XML_SCHEMA = ++ ++# The XML_DTD tag can be used to specify an XML DTD, ++# which can be used by a validating XML parser to check the ++# syntax of the XML files. ++ ++XML_DTD = ++ ++# If the XML_PROGRAMLISTING tag is set to YES Doxygen will ++# dump the program listings (including syntax highlighting ++# and cross-referencing information) to the XML output. Note that ++# enabling this will significantly increase the size of the XML output. ++ ++XML_PROGRAMLISTING = YES ++ ++#--------------------------------------------------------------------------- ++# configuration options for the AutoGen Definitions output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will ++# generate an AutoGen Definitions (see autogen.sf.net) file ++# that captures the structure of the code including all ++# documentation. Note that this feature is still experimental ++# and incomplete at the moment. ++ ++GENERATE_AUTOGEN_DEF = NO ++ ++#--------------------------------------------------------------------------- ++# configuration options related to the Perl module output ++#--------------------------------------------------------------------------- ++ ++# If the GENERATE_PERLMOD tag is set to YES Doxygen will ++# generate a Perl module file that captures the structure of ++# the code including all documentation. Note that this ++# feature is still experimental and incomplete at the ++# moment. ++ ++GENERATE_PERLMOD = NO ++ ++# If the PERLMOD_LATEX tag is set to YES Doxygen will generate ++# the necessary Makefile rules, Perl scripts and LaTeX code to be able ++# to generate PDF and DVI output from the Perl module output. ++ ++PERLMOD_LATEX = NO ++ ++# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be ++# nicely formatted so it can be parsed by a human reader. This is useful ++# if you want to understand what is going on. On the other hand, if this ++# tag is set to NO the size of the Perl module output will be much smaller ++# and Perl will parse it just the same. ++ ++PERLMOD_PRETTY = YES ++ ++# The names of the make variables in the generated doxyrules.make file ++# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. ++# This is useful so different doxyrules.make files included by the same ++# Makefile don't overwrite each other's variables. ++ ++PERLMOD_MAKEVAR_PREFIX = ++ ++#--------------------------------------------------------------------------- ++# Configuration options related to the preprocessor ++#--------------------------------------------------------------------------- ++ ++# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will ++# evaluate all C-preprocessor directives found in the sources and include ++# files. ++ ++ENABLE_PREPROCESSING = YES ++ ++# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro ++# names in the source code. If set to NO (the default) only conditional ++# compilation will be performed. Macro expansion can be done in a controlled ++# way by setting EXPAND_ONLY_PREDEF to YES. ++ ++MACRO_EXPANSION = NO ++ ++# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES ++# then the macro expansion is limited to the macros specified with the ++# PREDEFINED and EXPAND_AS_DEFINED tags. ++ ++EXPAND_ONLY_PREDEF = NO ++ ++# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files ++# in the INCLUDE_PATH (see below) will be search if a #include is found. ++ ++SEARCH_INCLUDES = YES ++ ++# The INCLUDE_PATH tag can be used to specify one or more directories that ++# contain include files that are not input files but should be processed by ++# the preprocessor. ++ ++INCLUDE_PATH = ++ ++# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard ++# patterns (like *.h and *.hpp) to filter out the header-files in the ++# directories. If left blank, the patterns specified with FILE_PATTERNS will ++# be used. ++ ++INCLUDE_FILE_PATTERNS = ++ ++# The PREDEFINED tag can be used to specify one or more macro names that ++# are defined before the preprocessor is started (similar to the -D option of ++# gcc). The argument of the tag is a list of macros of the form: name ++# or name=definition (no spaces). If the definition and the = are ++# omitted =1 is assumed. To prevent a macro definition from being ++# undefined via #undef or recursively expanded use the := operator ++# instead of the = operator. ++ ++PREDEFINED = ++ ++# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then ++# this tag can be used to specify a list of macro names that should be expanded. ++# The macro definition that is found in the sources will be used. ++# Use the PREDEFINED tag if you want to use a different macro definition. ++ ++EXPAND_AS_DEFINED = ++ ++# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then ++# doxygen's preprocessor will remove all function-like macros that are alone ++# on a line, have an all uppercase name, and do not end with a semicolon. Such ++# function macros are typically used for boiler-plate code, and will confuse ++# the parser if not removed. ++ ++SKIP_FUNCTION_MACROS = NO ++ ++#--------------------------------------------------------------------------- ++# Configuration::additions related to external references ++#--------------------------------------------------------------------------- ++ ++# The TAGFILES option can be used to specify one or more tagfiles. ++# Optionally an initial location of the external documentation ++# can be added for each tagfile. The format of a tag file without ++# this location is as follows: ++# TAGFILES = file1 file2 ... ++# Adding location for the tag files is done as follows: ++# TAGFILES = file1=loc1 "file2 = loc2" ... ++# where "loc1" and "loc2" can be relative or absolute paths or ++# URLs. If a location is present for each tag, the installdox tool ++# does not have to be run to correct the links. ++# Note that each tag file must have a unique name ++# (where the name does NOT include the path) ++# If a tag file is not located in the directory in which doxygen ++# is run, you must also specify the path to the tagfile here. ++ ++TAGFILES = ++ ++# When a file name is specified after GENERATE_TAGFILE, doxygen will create ++# a tag file that is based on the input files it reads. ++ ++GENERATE_TAGFILE = ++ ++# If the ALLEXTERNALS tag is set to YES all external classes will be listed ++# in the class index. If set to NO only the inherited external classes ++# will be listed. ++ ++ALLEXTERNALS = NO ++ ++# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed ++# in the modules index. If set to NO, only the current project's groups will ++# be listed. ++ ++EXTERNAL_GROUPS = YES ++ ++# The PERL_PATH should be the absolute path and name of the perl script ++# interpreter (i.e. the result of `which perl'). ++ ++PERL_PATH = /usr/bin/perl ++ ++#--------------------------------------------------------------------------- ++# Configuration options related to the dot tool ++#--------------------------------------------------------------------------- ++ ++# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will ++# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base ++# or super classes. Setting the tag to NO turns the diagrams off. Note that ++# this option is superseded by the HAVE_DOT option below. This is only a ++# fallback. It is recommended to install and use dot, since it yields more ++# powerful graphs. ++ ++CLASS_DIAGRAMS = NO ++ ++# You can define message sequence charts within doxygen comments using the \msc ++# command. Doxygen will then run the mscgen tool (see ++# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the ++# documentation. The MSCGEN_PATH tag allows you to specify the directory where ++# the mscgen tool resides. If left empty the tool is assumed to be found in the ++# default search path. ++ ++MSCGEN_PATH = ++ ++# If set to YES, the inheritance and collaboration graphs will hide ++# inheritance and usage relations if the target is undocumented ++# or is not a class. ++ ++HIDE_UNDOC_RELATIONS = YES ++ ++# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is ++# available from the path. This tool is part of Graphviz, a graph visualization ++# toolkit from AT&T and Lucent Bell Labs. The other options in this section ++# have no effect if this option is set to NO (the default) ++ ++HAVE_DOT = ++ ++# By default doxygen will write a font called FreeSans.ttf to the output ++# directory and reference it in all dot files that doxygen generates. This ++# font does not include all possible unicode characters however, so when you need ++# these (or just want a differently looking font) you can specify the font name ++# using DOT_FONTNAME. You need need to make sure dot is able to find the font, ++# which can be done by putting it in a standard location or by setting the ++# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory ++# containing the font. ++ ++DOT_FONTNAME = FreeSans ++ ++# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. ++# The default size is 10pt. ++ ++DOT_FONTSIZE = 10 ++ ++# By default doxygen will tell dot to use the output directory to look for the ++# FreeSans.ttf font (which doxygen will put there itself). If you specify a ++# different font using DOT_FONTNAME you can set the path where dot ++# can find it using this tag. ++ ++DOT_FONTPATH = ++ ++# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen ++# will generate a graph for each documented class showing the direct and ++# indirect inheritance relations. Setting this tag to YES will force the ++# the CLASS_DIAGRAMS tag to NO. ++ ++CLASS_GRAPH = YES ++ ++# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen ++# will generate a graph for each documented class showing the direct and ++# indirect implementation dependencies (inheritance, containment, and ++# class references variables) of the class with other documented classes. ++ ++COLLABORATION_GRAPH = YES ++ ++# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen ++# will generate a graph for groups, showing the direct groups dependencies ++ ++GROUP_GRAPHS = YES ++ ++# If the UML_LOOK tag is set to YES doxygen will generate inheritance and ++# collaboration diagrams in a style similar to the OMG's Unified Modeling ++# Language. ++ ++UML_LOOK = NO ++ ++# If set to YES, the inheritance and collaboration graphs will show the ++# relations between templates and their instances. ++ ++TEMPLATE_RELATIONS = NO ++ ++# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT ++# tags are set to YES then doxygen will generate a graph for each documented ++# file showing the direct and indirect include dependencies of the file with ++# other documented files. ++ ++INCLUDE_GRAPH = YES ++ ++# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and ++# HAVE_DOT tags are set to YES then doxygen will generate a graph for each ++# documented header file showing the documented files that directly or ++# indirectly include this file. ++ ++INCLUDED_BY_GRAPH = YES ++ ++# If the CALL_GRAPH and HAVE_DOT options are set to YES then ++# doxygen will generate a call dependency graph for every global function ++# or class method. Note that enabling this option will significantly increase ++# the time of a run. So in most cases it will be better to enable call graphs ++# for selected functions only using the \callgraph command. ++ ++CALL_GRAPH = NO ++ ++# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then ++# doxygen will generate a caller dependency graph for every global function ++# or class method. Note that enabling this option will significantly increase ++# the time of a run. So in most cases it will be better to enable caller ++# graphs for selected functions only using the \callergraph command. ++ ++CALLER_GRAPH = NO ++ ++# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen ++# will graphical hierarchy of all classes instead of a textual one. ++ ++GRAPHICAL_HIERARCHY = YES ++ ++# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES ++# then doxygen will show the dependencies a directory has on other directories ++# in a graphical way. The dependency relations are determined by the #include ++# relations between the files in the directories. ++ ++DIRECTORY_GRAPH = YES ++ ++# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images ++# generated by dot. Possible values are png, jpg, or gif ++# If left blank png will be used. ++ ++DOT_IMAGE_FORMAT = png ++ ++# The tag DOT_PATH can be used to specify the path where the dot tool can be ++# found. If left blank, it is assumed the dot tool can be found in the path. ++ ++DOT_PATH = ++ ++# The DOTFILE_DIRS tag can be used to specify one or more directories that ++# contain dot files that are included in the documentation (see the ++# \dotfile command). ++ ++DOTFILE_DIRS = ++ ++# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of ++# nodes that will be shown in the graph. If the number of nodes in a graph ++# becomes larger than this value, doxygen will truncate the graph, which is ++# visualized by representing a node as a red box. Note that doxygen if the ++# number of direct children of the root node in a graph is already larger than ++# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note ++# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. ++ ++DOT_GRAPH_MAX_NODES = 50 ++ ++# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the ++# graphs generated by dot. A depth value of 3 means that only nodes reachable ++# from the root by following a path via at most 3 edges will be shown. Nodes ++# that lay further from the root node will be omitted. Note that setting this ++# option to 1 or 2 may greatly reduce the computation time needed for large ++# code bases. Also note that the size of a graph can be further restricted by ++# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. ++ ++MAX_DOT_GRAPH_DEPTH = 0 ++ ++# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent ++# background. This is disabled by default, because dot on Windows does not ++# seem to support this out of the box. Warning: Depending on the platform used, ++# enabling this option may lead to badly anti-aliased labels on the edges of ++# a graph (i.e. they become hard to read). ++ ++DOT_TRANSPARENT = NO ++ ++# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output ++# files in one run (i.e. multiple -o and -T options on the command line). This ++# makes dot run faster, but since only newer versions of dot (>1.8.10) ++# support this, this feature is disabled by default. ++ ++DOT_MULTI_TARGETS = NO ++ ++# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will ++# generate a legend page explaining the meaning of the various boxes and ++# arrows in the dot generated graphs. ++ ++GENERATE_LEGEND = YES ++ ++# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will ++# remove the intermediate dot files that are used to generate ++# the various graphs. ++ ++DOT_CLEANUP = YES ++ ++#--------------------------------------------------------------------------- ++# Options related to the search engine ++#--------------------------------------------------------------------------- ++ ++# The SEARCHENGINE tag specifies whether or not a search engine should be ++# used. If set to NO the values of all tags below this one will be ignored. ++ ++SEARCHENGINE = NO +--- /dev/null ++++ dlt-daemon-2.2.0/config.h +@@ -0,0 +1,44 @@ ++#define HAVE_ARPAINET_H 1 ++#define HAVE_FCNTL_H 1 ++#define HAVE_FLOAT_H 1 ++#define HAVE_LIMITS_H 1 ++#define HAVE_NETDB_H 1 ++#define HAVE_NETINETIN_H 1 ++#define HAVE_STDDEF_H 1 ++#define HAVE_STDINT_H 1 ++#define HAVE_STDLIB_H 1 ++#define HAVE_STRING_H 1 ++#define HAVE_STRINGS_H 1 ++#define HAVE_SYSIOCTL_H 1 ++#define HAVE_SYSSOCKET_H 1 ++#define HAVE_SYSTIME_H 1 ++#define HAVE_UNISTD_H 1 ++#define HAVE_SYSIPC_H 1 ++#define HAVE_NETDB_H 1 ++#define HAVE_CTYPE_H 1 ++#define HAVE_SIGNAL_H 1 ++#define HAVE_SYSLOG_H 1 ++#define HAVE_SYSSTAT_H 1 ++#define HAVE_LINUXSTAT_H 1 ++#define HAVE_SYSUIO_H 1 ++#define HAVE_TERMIOS_H 1 ++#define HAVE_UNISTD_H 1 ++ ++#define HAVE_FUNC_BZERO 1 ++#define HAVE_FUNC_CLOCKGETTIME 0 ++#define HAVE_FUNC_FLOOR 0 ++#define HAVE_FUNC_FORK 1 ++#define HAVE_FUNC_GETHOSTBYNAME 1 ++#define HAVE_FUNC_GETTIMEBYDAY 1 ++#define HAVE_FUNC_INETNTOA 1 ++#define HAVE_FUNC_MALLOC 1 ++#define HAVE_FUNC_MEMMOVE 1 ++#define HAVE_FUNC_MEMSET 1 ++#define HAVE_FUNC_MKFIFO 1 ++#define HAVE_FUNC_SELECT 1 ++#define HAVE_FUNC_SOCKET 1 ++#define HAVE_FUNC_STRCHR 1 ++#define HAVE_FUNC_STRERROR 1 ++#define HAVE_FUNC_STRSTR 1 ++#define HAVE_FUNC_STRTOL 1 ++ +--- /dev/null ++++ dlt-daemon-2.2.0/svnversion.h +@@ -0,0 +1,2 @@ ++/* DO NOT EDIT! GENERATED AUTOMATICALLY! */ ++#define SVN_VERSION "1666" diff --git a/debian/patches/series b/debian/patches/series new file mode 100644 index 0000000..ddc2db0 --- /dev/null +++ b/debian/patches/series @@ -0,0 +1 @@ +debian-changes-2.2.0-1 diff --git a/debian/rules b/debian/rules new file mode 100755 index 0000000..b760bee --- /dev/null +++ b/debian/rules @@ -0,0 +1,13 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +%: + dh $@ diff --git a/debian/source/format b/debian/source/format new file mode 100755 index 0000000..163aaf8 --- /dev/null +++ b/debian/source/format @@ -0,0 +1 @@ +3.0 (quilt) diff --git a/debian/watch b/debian/watch new file mode 100755 index 0000000..34427ef --- /dev/null +++ b/debian/watch @@ -0,0 +1,23 @@ +# Example watch control file for uscan +# Rename this file to "watch" and then you can run the "uscan" command +# to check for upstream updates and more. +# See uscan(1) for format + +# Compulsory line, this is a version 3 file +version=3 + +# Uncomment to examine a Webpage +# +#http://www.example.com/downloads.php dlt-daemon-(.*)\.tar\.gz + +# Uncomment to examine a Webserver directory +#http://www.example.com/pub/dlt-daemon-(.*)\.tar\.gz + +# Uncommment to examine a FTP server +#ftp://ftp.example.com/pub/dlt-daemon-(.*)\.tar\.gz debian uupdate + +# Uncomment to find new files on sourceforge, for devscripts >= 2.9 +# http://sf.net/dlt-daemon/dlt-daemon-(.*)\.tar\.gz + +# Uncomment to find new files on GooglePages +# http://example.googlepages.com/foo.html dlt-daemon-(.*)\.tar\.gz -- cgit v1.2.1