From 8093908ff4b24125ba3aaf4f548ff93699f75e04 Mon Sep 17 00:00:00 2001 From: KHANH LUONG HONG DUY Date: Wed, 19 Aug 2020 17:51:19 +0700 Subject: Update uncrustify Remove indentation of preprocessor directives inside #if blocks Remove space after # of #if blocks Remove newline between '}' and 'else' Remove newline between 'else if' and '{' Remove space inside braces Remove blank lines before '}' Ignore braces on single-line of 'while' statement Change code width to 100 columns Add aligning all preprocessors Add the span for aligning comments that end lines to 2 Add spaces to indent 'case' from 'switch' to 4 Add braces on a single-line 'do', 'while', 'for', 'if' statement Add braces to all blocks of an 'if'/'else if'/'else' chain Signed-off-by: KHANH LUONG HONG DUY --- uncrustify.cfg | 2736 +++++++++++++++++++++++++++++++++++++++++++++++++++ util/uncrustify.cfg | 2736 --------------------------------------------------- 2 files changed, 2736 insertions(+), 2736 deletions(-) create mode 100644 uncrustify.cfg delete mode 100644 util/uncrustify.cfg diff --git a/uncrustify.cfg b/uncrustify.cfg new file mode 100644 index 0000000..faec3ae --- /dev/null +++ b/uncrustify.cfg @@ -0,0 +1,2736 @@ +# Uncrustify-0.68_f + +# +# General options +# + +# The type of line endings. +# +# Default: auto +newlines = auto # lf/crlf/cr/auto + +# The original size of tabs in the input. +# +# Default: 8 +input_tab_size = 4 # unsigned number + +# The size of tabs in the output (only used if align_with_tabs=true). +# +# Default: 8 +output_tab_size = 4 # unsigned number + +# The ASCII value of the string escape char, usually 92 (\) or (Pawn) 94 (^). +# +# Default: 92 +string_escape_char = 92 # unsigned number + +# Alternate string escape char (usually only used for Pawn). +# Only works right before the quote char. +string_escape_char2 = 0 # unsigned number + +# Replace tab characters found in string literals with the escape sequence \t +# instead. +string_replace_tab_chars = false # true/false + +# Allow interpreting '>=' and '>>=' as part of a template in code like +# 'void f(list>=val);'. If true, 'assert(x<0 && y>=3)' will be broken. +# Improvements to template detection may make this option obsolete. +tok_split_gte = false # true/false + +# Specify the marker used in comments to disable processing of part of the +# file. +# +# Default: *INDENT-OFF* +disable_processing_cmt = "" # string + +# Specify the marker used in comments to (re)enable processing in a file. +# +# Default: *INDENT-ON* +enable_processing_cmt = "" # string + +# Enable parsing of digraphs. +enable_digraphs = false # true/false + +# Add or remove the UTF-8 BOM (recommend 'remove'). +utf8_bom = ignore # ignore/add/remove/force + +# If the file contains bytes with values between 128 and 255, but is not +# UTF-8, then output as UTF-8. +utf8_byte = false # true/false + +# Force the output encoding to UTF-8. +utf8_force = false # true/false + +# +# Spacing options +# + +# Add or remove space around non-assignment symbolic operators ('+', '/', '%', +# '<<', and so forth). +sp_arith = force # ignore/add/remove/force + +# Add or remove space around arithmetic operators '+' and '-'. +# +# Overrides sp_arith. +sp_arith_additive = ignore # ignore/add/remove/force + +# Add or remove space around assignment operator '=', '+=', etc. +sp_assign = force # ignore/add/remove/force + +# Add or remove space around '=' in C++11 lambda capture specifications. +# +# Overrides sp_assign. +sp_cpp_lambda_assign = ignore # ignore/add/remove/force + +# Add or remove space after the capture specification in C++11 lambda. +sp_cpp_lambda_paren = ignore # ignore/add/remove/force + +# Add or remove space around assignment operator '=' in a prototype. +sp_assign_default = ignore # ignore/add/remove/force + +# Add or remove space before assignment operator '=', '+=', etc. +# +# Overrides sp_assign. +sp_before_assign = ignore # ignore/add/remove/force + +# Add or remove space after assignment operator '=', '+=', etc. +# +# Overrides sp_assign. +sp_after_assign = ignore # ignore/add/remove/force + +# Add or remove space in 'NS_ENUM ('. +sp_enum_paren = ignore # ignore/add/remove/force + +# Add or remove space around assignment '=' in enum. +sp_enum_assign = force # ignore/add/remove/force + +# Add or remove space before assignment '=' in enum. +# +# Overrides sp_enum_assign. +sp_enum_before_assign = ignore # ignore/add/remove/force + +# Add or remove space after assignment '=' in enum. +# +# Overrides sp_enum_assign. +sp_enum_after_assign = ignore # ignore/add/remove/force + +# Add or remove space around assignment ':' in enum. +sp_enum_colon = ignore # ignore/add/remove/force + +# Add or remove space around preprocessor '##' concatenation operator. +# +# Default: add +sp_pp_concat = ignore # ignore/add/remove/force + +# Add or remove space after preprocessor '#' stringify operator. +# Also affects the '#@' charizing operator. +sp_pp_stringify = ignore # ignore/add/remove/force + +# Add or remove space before preprocessor '#' stringify operator +# as in '#define x(y) L#y'. +sp_before_pp_stringify = ignore # ignore/add/remove/force + +# Add or remove space around boolean operators '&&' and '||'. +sp_bool = force # ignore/add/remove/force + +# Add or remove space around compare operator '<', '>', '==', etc. +sp_compare = force # ignore/add/remove/force + +# Add or remove space inside '(' and ')'. +sp_inside_paren = remove # ignore/add/remove/force + +# Add or remove space between nested parentheses, i.e. '((' vs. ') )'. +sp_paren_paren = remove # ignore/add/remove/force + +# Add or remove space between back-to-back parentheses, i.e. ')(' vs. ') ('. +sp_cparen_oparen = ignore # ignore/add/remove/force + +# Whether to balance spaces inside nested parentheses. +sp_balance_nested_parens = false # true/false + +# Add or remove space between ')' and '{'. +sp_paren_brace = force # ignore/add/remove/force + +# Add or remove space between nested braces, i.e. '{{' vs '{ {'. +sp_brace_brace = ignore # ignore/add/remove/force + +# Add or remove space before pointer star '*'. +sp_before_ptr_star = force # ignore/add/remove/force + +# Add or remove space before pointer star '*' that isn't followed by a +# variable name. If set to 'ignore', sp_before_ptr_star is used instead. +sp_before_unnamed_ptr_star = force # ignore/add/remove/force + +# Add or remove space between pointer stars '*'. +sp_between_ptr_star = remove # ignore/add/remove/force + +# Add or remove space after pointer star '*', if followed by a word. +sp_after_ptr_star = remove # ignore/add/remove/force + +# Add or remove space after pointer caret '^', if followed by a word. +sp_after_ptr_block_caret = ignore # ignore/add/remove/force + +# Add or remove space after pointer star '*', if followed by a qualifier. +sp_after_ptr_star_qualifier = ignore # ignore/add/remove/force + +# Add or remove space after a pointer star '*', if followed by a function +# prototype or function definition. +sp_after_ptr_star_func = remove # ignore/add/remove/force + +# Add or remove space after a pointer star '*', if followed by an open +# parenthesis, as in 'void* (*)(). +sp_ptr_star_paren = ignore # ignore/add/remove/force + +# Add or remove space before a pointer star '*', if followed by a function +# prototype or function definition. +sp_before_ptr_star_func = add # ignore/add/remove/force + +# Add or remove space before a reference sign '&'. +sp_before_byref = add # ignore/add/remove/force + +# Add or remove space before a reference sign '&' that isn't followed by a +# variable name. If set to 'ignore', sp_before_byref is used instead. +sp_before_unnamed_byref = add # ignore/add/remove/force + +# Add or remove space after reference sign '&', if followed by a word. +sp_after_byref = remove # ignore/add/remove/force + +# Add or remove space after a reference sign '&', if followed by a function +# prototype or function definition. +sp_after_byref_func = remove # ignore/add/remove/force + +# Add or remove space before a reference sign '&', if followed by a function +# prototype or function definition. +sp_before_byref_func = add # ignore/add/remove/force + +# Add or remove space between type and word. +# +# Default: force +sp_after_type = force # ignore/add/remove/force + +# Add or remove space between 'decltype(...)' and word. +sp_after_decltype = ignore # ignore/add/remove/force + +# (D) Add or remove space before the parenthesis in the D constructs +# 'template Foo(' and 'class Foo('. +sp_before_template_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'template' and '<'. +# If set to ignore, sp_before_angle is used. +sp_template_angle = ignore # ignore/add/remove/force + +# Add or remove space before '<'. +sp_before_angle = ignore # ignore/add/remove/force + +# Add or remove space inside '<' and '>'. +sp_inside_angle = ignore # ignore/add/remove/force + +# Add or remove space between '>' and ':'. +sp_angle_colon = ignore # ignore/add/remove/force + +# Add or remove space after '<>'. +sp_after_angle = ignore # ignore/add/remove/force + +# Add or remove space between '>' and '(' as found in 'new List(foo);'. +sp_angle_paren = ignore # ignore/add/remove/force + +# Add or remove space between '>' and '()' as found in 'new List();'. +sp_angle_paren_empty = ignore # ignore/add/remove/force + +# Add or remove space between '>' and a word as in 'List m;' or +# 'template static ...'. +sp_angle_word = ignore # ignore/add/remove/force + +# Add or remove space between '>' and '>' in '>>' (template stuff). +# +# Default: add +sp_angle_shift = add # ignore/add/remove/force + +# (C++11) Permit removal of the space between '>>' in 'foo >'. Note +# that sp_angle_shift cannot remove the space without this option. +sp_permit_cpp11_shift = false # true/false + +# Add or remove space before '(' of control statements ('if', 'for', 'switch', +# 'while', etc.). +sp_before_sparen = force # ignore/add/remove/force + +# Add or remove space inside '(' and ')' of control statements. +sp_inside_sparen = remove # ignore/add/remove/force + +# Add or remove space after '(' of control statements. +# +# Overrides sp_inside_sparen. +sp_inside_sparen_open = ignore # ignore/add/remove/force + +# Add or remove space before ')' of control statements. +# +# Overrides sp_inside_sparen. +sp_inside_sparen_close = ignore # ignore/add/remove/force + +# Add or remove space after ')' of control statements. +sp_after_sparen = force # ignore/add/remove/force + +# Add or remove space between ')' and '{' of of control statements. +sp_sparen_brace = force # ignore/add/remove/force + +# (D) Add or remove space between 'invariant' and '('. +sp_invariant_paren = ignore # ignore/add/remove/force + +# (D) Add or remove space after the ')' in 'invariant (C) c'. +sp_after_invariant_paren = ignore # ignore/add/remove/force + +# Add or remove space before empty statement ';' on 'if', 'for' and 'while'. +sp_special_semi = remove # ignore/add/remove/force + +# Add or remove space before ';'. +# +# Default: remove +sp_before_semi = remove # ignore/add/remove/force + +# Add or remove space before ';' in non-empty 'for' statements. +sp_before_semi_for = remove # ignore/add/remove/force + +# Add or remove space before a semicolon of an empty part of a for statement. +sp_before_semi_for_empty = ignore # ignore/add/remove/force + +# Add or remove space after ';', except when followed by a comment. +# +# Default: add +sp_after_semi = add # ignore/add/remove/force + +# Add or remove space after ';' in non-empty 'for' statements. +# +# Default: force +sp_after_semi_for = force # ignore/add/remove/force + +# Add or remove space after the final semicolon of an empty part of a for +# statement, as in 'for ( ; ; )'. +sp_after_semi_for_empty = ignore # ignore/add/remove/force + +# Add or remove space before '[' (except '[]'). +sp_before_square = ignore # ignore/add/remove/force + +# Add or remove space before '[]'. +sp_before_squares = remove # ignore/add/remove/force + +# Add or remove space before C++17 structured bindings. +sp_cpp_before_struct_binding = ignore # ignore/add/remove/force + +# Add or remove space inside a non-empty '[' and ']'. +sp_inside_square = remove # ignore/add/remove/force + +# (OC) Add or remove space inside a non-empty Objective-C boxed array '@[' and +# ']'. If set to ignore, sp_inside_square is used. +sp_inside_square_oc_array = ignore # ignore/add/remove/force + +# Add or remove space after ',', i.e. 'a,b' vs. 'a, b'. +sp_after_comma = force # ignore/add/remove/force + +# Add or remove space before ','. +# +# Default: remove +sp_before_comma = remove # ignore/add/remove/force + +# (C#) Add or remove space between ',' and ']' in multidimensional array type +# like 'int[,,]'. +sp_after_mdatype_commas = ignore # ignore/add/remove/force + +# (C#) Add or remove space between '[' and ',' in multidimensional array type +# like 'int[,,]'. +sp_before_mdatype_commas = ignore # ignore/add/remove/force + +# (C#) Add or remove space between ',' in multidimensional array type +# like 'int[,,]'. +sp_between_mdatype_commas = ignore # ignore/add/remove/force + +# Add or remove space between an open parenthesis and comma, +# i.e. '(,' vs. '( ,'. +# +# Default: force +sp_paren_comma = force # ignore/add/remove/force + +# Add or remove space before the variadic '...' when preceded by a +# non-punctuator. +sp_before_ellipsis = ignore # ignore/add/remove/force + +# Add or remove space between a type and '...'. +sp_type_ellipsis = ignore # ignore/add/remove/force + +# Add or remove space between ')' and '...'. +sp_paren_ellipsis = ignore # ignore/add/remove/force + +# Add or remove space after class ':'. +sp_after_class_colon = ignore # ignore/add/remove/force + +# Add or remove space before class ':'. +sp_before_class_colon = ignore # ignore/add/remove/force + +# Add or remove space after class constructor ':'. +sp_after_constr_colon = ignore # ignore/add/remove/force + +# Add or remove space before class constructor ':'. +sp_before_constr_colon = ignore # ignore/add/remove/force + +# Add or remove space before case ':'. +# +# Default: remove +sp_before_case_colon = remove # ignore/add/remove/force + +# Add or remove space between 'operator' and operator sign. +sp_after_operator = ignore # ignore/add/remove/force + +# Add or remove space between the operator symbol and the open parenthesis, as +# in 'operator ++('. +sp_after_operator_sym = ignore # ignore/add/remove/force + +# Overrides sp_after_operator_sym when the operator has no arguments, as in +# 'operator *()'. +sp_after_operator_sym_empty = ignore # ignore/add/remove/force + +# Add or remove space after C/D cast, i.e. 'cast(int)a' vs. 'cast(int) a' or +# '(int)a' vs. '(int) a'. +sp_after_cast = remove # ignore/add/remove/force + +# Add or remove spaces inside cast parentheses. +sp_inside_paren_cast = remove # ignore/add/remove/force + +# Add or remove space between the type and open parenthesis in a C++ cast, +# i.e. 'int(exp)' vs. 'int (exp)'. +sp_cpp_cast_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'sizeof' and '('. +sp_sizeof_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'sizeof' and '...'. +sp_sizeof_ellipsis = ignore # ignore/add/remove/force + +# Add or remove space between 'sizeof...' and '('. +sp_sizeof_ellipsis_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'decltype' and '('. +sp_decltype_paren = ignore # ignore/add/remove/force + +# (Pawn) Add or remove space after the tag keyword. +sp_after_tag = ignore # ignore/add/remove/force + +# Add or remove space inside enum '{' and '}'. +sp_inside_braces_enum = ignore # ignore/add/remove/force + +# Add or remove space inside struct/union '{' and '}'. +sp_inside_braces_struct = ignore # ignore/add/remove/force + +# (OC) Add or remove space inside Objective-C boxed dictionary '{' and '}' +sp_inside_braces_oc_dict = ignore # ignore/add/remove/force + +# Add or remove space after open brace in an unnamed temporary +# direct-list-initialization. +sp_after_type_brace_init_lst_open = ignore # ignore/add/remove/force + +# Add or remove space before close brace in an unnamed temporary +# direct-list-initialization. +sp_before_type_brace_init_lst_close = ignore # ignore/add/remove/force + +# Add or remove space inside an unnamed temporary direct-list-initialization. +sp_inside_type_brace_init_lst = ignore # ignore/add/remove/force + +# Add or remove space inside '{' and '}'. +sp_inside_braces = remove # ignore/add/remove/force + +# Add or remove space inside '{}'. +sp_inside_braces_empty = remove # ignore/add/remove/force + +# Add or remove space between return type and function name. A minimum of 1 +# is forced except for pointer return types. +sp_type_func = ignore # ignore/add/remove/force + +# Add or remove space between type and open brace of an unnamed temporary +# direct-list-initialization. +sp_type_brace_init_lst = ignore # ignore/add/remove/force + +# Add or remove space between function name and '(' on function declaration. +sp_func_proto_paren = ignore # ignore/add/remove/force + +# Add or remove space between function name and '()' on function declaration +# without parameters. +sp_func_proto_paren_empty = ignore # ignore/add/remove/force + +# Add or remove space between function name and '(' on function definition. +sp_func_def_paren = ignore # ignore/add/remove/force + +# Add or remove space between function name and '()' on function definition +# without parameters. +sp_func_def_paren_empty = ignore # ignore/add/remove/force + +# Add or remove space inside empty function '()'. +sp_inside_fparens = remove # ignore/add/remove/force + +# Add or remove space inside function '(' and ')'. +sp_inside_fparen = remove # ignore/add/remove/force + +# Add or remove space inside the first parentheses in a function type, as in +# 'void (*x)(...)'. +sp_inside_tparen = ignore # ignore/add/remove/force + +# Add or remove space between the ')' and '(' in a function type, as in +# 'void (*x)(...)'. +sp_after_tparen_close = ignore # ignore/add/remove/force + +# Add or remove space between ']' and '(' when part of a function call. +sp_square_fparen = ignore # ignore/add/remove/force + +# Add or remove space between ')' and '{' of function. +sp_fparen_brace = force # ignore/add/remove/force + +# Add or remove space between ')' and '{' of s function call in object +# initialization. +# +# Overrides sp_fparen_brace. +sp_fparen_brace_initializer = ignore # ignore/add/remove/force + +# (Java) Add or remove space between ')' and '{{' of double brace initializer. +sp_fparen_dbrace = ignore # ignore/add/remove/force + +# Add or remove space between function name and '(' on function calls. +sp_func_call_paren = ignore # ignore/add/remove/force + +# Add or remove space between function name and '()' on function calls without +# parameters. If set to 'ignore' (the default), sp_func_call_paren is used. +sp_func_call_paren_empty = ignore # ignore/add/remove/force + +# Add or remove space between the user function name and '(' on function +# calls. You need to set a keyword to be a user function in the config file, +# like: +# set func_call_user tr _ i18n +sp_func_call_user_paren = ignore # ignore/add/remove/force + +# Add or remove space inside user function '(' and ')'. +sp_func_call_user_inside_fparen = ignore # ignore/add/remove/force + +# Add or remove space between nested parentheses with user functions, +# i.e. '((' vs. '( ('. +sp_func_call_user_paren_paren = ignore # ignore/add/remove/force + +# Add or remove space between a constructor/destructor and the open +# parenthesis. +sp_func_class_paren = ignore # ignore/add/remove/force + +# Add or remove space between a constructor without parameters or destructor +# and '()'. +sp_func_class_paren_empty = ignore # ignore/add/remove/force + +# Add or remove space between 'return' and '('. +sp_return_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'return' and '{'. +sp_return_brace = ignore # ignore/add/remove/force + +# Add or remove space between '__attribute__' and '('. +sp_attribute_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'defined' and '(' in '#if defined (FOO)'. +sp_defined_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'throw' and '(' in 'throw (something)'. +sp_throw_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'throw' and anything other than '(' as in +# '@throw [...];'. +sp_after_throw = ignore # ignore/add/remove/force + +# Add or remove space between 'catch' and '(' in 'catch (something) { }'. +# If set to ignore, sp_before_sparen is used. +sp_catch_paren = ignore # ignore/add/remove/force + +# (OC) Add or remove space between '@catch' and '(' +# in '@catch (something) { }'. If set to ignore, sp_catch_paren is used. +sp_oc_catch_paren = ignore # ignore/add/remove/force + +# (D) Add or remove space between 'version' and '(' +# in 'version (something) { }'. If set to ignore, sp_before_sparen is used. +sp_version_paren = ignore # ignore/add/remove/force + +# (D) Add or remove space between 'scope' and '(' +# in 'scope (something) { }'. If set to ignore, sp_before_sparen is used. +sp_scope_paren = ignore # ignore/add/remove/force + +# Add or remove space between 'super' and '(' in 'super (something)'. +# +# Default: remove +sp_super_paren = remove # ignore/add/remove/force + +# Add or remove space between 'this' and '(' in 'this (something)'. +# +# Default: remove +sp_this_paren = remove # ignore/add/remove/force + +# Add or remove space between a macro name and its definition. +sp_macro = ignore # ignore/add/remove/force + +# Add or remove space between a macro function ')' and its definition. +sp_macro_func = ignore # ignore/add/remove/force + +# Add or remove space between 'else' and '{' if on the same line. +sp_else_brace = force # ignore/add/remove/force + +# Add or remove space between '}' and 'else' if on the same line. +sp_brace_else = force # ignore/add/remove/force + +# Add or remove space between '}' and the name of a typedef on the same line. +sp_brace_typedef = force # ignore/add/remove/force + +# Add or remove space before the '{' of a 'catch' statement, if the '{' and +# 'catch' are on the same line, as in 'catch (decl) {'. +sp_catch_brace = force # ignore/add/remove/force + +# (OC) Add or remove space before the '{' of a '@catch' statement, if the '{' +# and '@catch' are on the same line, as in '@catch (decl) {'. +# If set to ignore, sp_catch_brace is used. +sp_oc_catch_brace = ignore # ignore/add/remove/force + +# Add or remove space between '}' and 'catch' if on the same line. +sp_brace_catch = force # ignore/add/remove/force + +# (OC) Add or remove space between '}' and '@catch' if on the same line. +# If set to ignore, sp_brace_catch is used. +sp_oc_brace_catch = ignore # ignore/add/remove/force + +# Add or remove space between 'finally' and '{' if on the same line. +sp_finally_brace = ignore # ignore/add/remove/force + +# Add or remove space between '}' and 'finally' if on the same line. +sp_brace_finally = ignore # ignore/add/remove/force + +# Add or remove space between 'try' and '{' if on the same line. +sp_try_brace = ignore # ignore/add/remove/force + +# Add or remove space between get/set and '{' if on the same line. +sp_getset_brace = ignore # ignore/add/remove/force + +# Add or remove space between a variable and '{' for C++ uniform +# initialization. +# +# Default: add +sp_word_brace = add # ignore/add/remove/force + +# Add or remove space between a variable and '{' for a namespace. +# +# Default: add +sp_word_brace_ns = add # ignore/add/remove/force + +# Add or remove space before the '::' operator. +sp_before_dc = ignore # ignore/add/remove/force + +# Add or remove space after the '::' operator. +sp_after_dc = ignore # ignore/add/remove/force + +# (D) Add or remove around the D named array initializer ':' operator. +sp_d_array_colon = ignore # ignore/add/remove/force + +# Add or remove space after the '!' (not) unary operator. +# +# Default: remove +sp_not = remove # ignore/add/remove/force + +# Add or remove space after the '~' (invert) unary operator. +# +# Default: remove +sp_inv = remove # ignore/add/remove/force + +# Add or remove space after the '&' (address-of) unary operator. This does not +# affect the spacing after a '&' that is part of a type. +# +# Default: remove +sp_addr = remove # ignore/add/remove/force + +# Add or remove space around the '.' or '->' operators. +# +# Default: remove +sp_member = remove # ignore/add/remove/force + +# Add or remove space after the '*' (dereference) unary operator. This does +# not affect the spacing after a '*' that is part of a type. +# +# Default: remove +sp_deref = remove # ignore/add/remove/force + +# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. +# +# Default: remove +sp_sign = remove # ignore/add/remove/force + +# Add or remove space between '++' and '--' the word to which it is being +# applied, as in '(--x)' or 'y++;'. +# +# Default: remove +sp_incdec = remove # ignore/add/remove/force + +# Add or remove space before a backslash-newline at the end of a line. +# +# Default: add +sp_before_nl_cont = add # ignore/add/remove/force + +# (OC) Add or remove space after the scope '+' or '-', as in '-(void) foo;' +# or '+(int) bar;'. +sp_after_oc_scope = ignore # ignore/add/remove/force + +# (OC) Add or remove space after the colon in message specs, +# i.e. '-(int) f:(int) x;' vs. '-(int) f: (int) x;'. +sp_after_oc_colon = ignore # ignore/add/remove/force + +# (OC) Add or remove space before the colon in message specs, +# i.e. '-(int) f: (int) x;' vs. '-(int) f : (int) x;'. +sp_before_oc_colon = ignore # ignore/add/remove/force + +# (OC) Add or remove space after the colon in immutable dictionary expression +# 'NSDictionary *test = @{@"foo" :@"bar"};'. +sp_after_oc_dict_colon = ignore # ignore/add/remove/force + +# (OC) Add or remove space before the colon in immutable dictionary expression +# 'NSDictionary *test = @{@"foo" :@"bar"};'. +sp_before_oc_dict_colon = ignore # ignore/add/remove/force + +# (OC) Add or remove space after the colon in message specs, +# i.e. '[object setValue:1];' vs. '[object setValue: 1];'. +sp_after_send_oc_colon = ignore # ignore/add/remove/force + +# (OC) Add or remove space before the colon in message specs, +# i.e. '[object setValue:1];' vs. '[object setValue :1];'. +sp_before_send_oc_colon = ignore # ignore/add/remove/force + +# (OC) Add or remove space after the (type) in message specs, +# i.e. '-(int)f: (int) x;' vs. '-(int)f: (int)x;'. +sp_after_oc_type = ignore # ignore/add/remove/force + +# (OC) Add or remove space after the first (type) in message specs, +# i.e. '-(int) f:(int)x;' vs. '-(int)f:(int)x;'. +sp_after_oc_return_type = ignore # ignore/add/remove/force + +# (OC) Add or remove space between '@selector' and '(', +# i.e. '@selector(msgName)' vs. '@selector (msgName)'. +# Also applies to '@protocol()' constructs. +sp_after_oc_at_sel = ignore # ignore/add/remove/force + +# (OC) Add or remove space between '@selector(x)' and the following word, +# i.e. '@selector(foo) a:' vs. '@selector(foo)a:'. +sp_after_oc_at_sel_parens = ignore # ignore/add/remove/force + +# (OC) Add or remove space inside '@selector' parentheses, +# i.e. '@selector(foo)' vs. '@selector( foo )'. +# Also applies to '@protocol()' constructs. +sp_inside_oc_at_sel_parens = ignore # ignore/add/remove/force + +# (OC) Add or remove space before a block pointer caret, +# i.e. '^int (int arg){...}' vs. ' ^int (int arg){...}'. +sp_before_oc_block_caret = ignore # ignore/add/remove/force + +# (OC) Add or remove space after a block pointer caret, +# i.e. '^int (int arg){...}' vs. '^ int (int arg){...}'. +sp_after_oc_block_caret = ignore # ignore/add/remove/force + +# (OC) Add or remove space between the receiver and selector in a message, +# as in '[receiver selector ...]'. +sp_after_oc_msg_receiver = ignore # ignore/add/remove/force + +# (OC) Add or remove space after '@property'. +sp_after_oc_property = ignore # ignore/add/remove/force + +# (OC) Add or remove space between '@synchronized' and the open parenthesis, +# i.e. '@synchronized(foo)' vs. '@synchronized (foo)'. +sp_after_oc_synchronized = ignore # ignore/add/remove/force + +# Add or remove space around the ':' in 'b ? t : f'. +sp_cond_colon = ignore # ignore/add/remove/force + +# Add or remove space before the ':' in 'b ? t : f'. +# +# Overrides sp_cond_colon. +sp_cond_colon_before = ignore # ignore/add/remove/force + +# Add or remove space after the ':' in 'b ? t : f'. +# +# Overrides sp_cond_colon. +sp_cond_colon_after = ignore # ignore/add/remove/force + +# Add or remove space around the '?' in 'b ? t : f'. +sp_cond_question = ignore # ignore/add/remove/force + +# Add or remove space before the '?' in 'b ? t : f'. +# +# Overrides sp_cond_question. +sp_cond_question_before = ignore # ignore/add/remove/force + +# Add or remove space after the '?' in 'b ? t : f'. +# +# Overrides sp_cond_question. +sp_cond_question_after = ignore # ignore/add/remove/force + +# In the abbreviated ternary form '(a ?: b)', add or remove space between '?' +# and ':'. +# +# Overrides all other sp_cond_* options. +sp_cond_ternary_short = ignore # ignore/add/remove/force + +# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make +# sense here. +sp_case_label = ignore # ignore/add/remove/force + +# (D) Add or remove space around the D '..' operator. +sp_range = ignore # ignore/add/remove/force + +# Add or remove space after ':' in a Java/C++11 range-based 'for', +# as in 'for (Type var : expr)'. +sp_after_for_colon = ignore # ignore/add/remove/force + +# Add or remove space before ':' in a Java/C++11 range-based 'for', +# as in 'for (Type var : expr)'. +sp_before_for_colon = ignore # ignore/add/remove/force + +# (D) Add or remove space between 'extern' and '(' as in 'extern (C)'. +sp_extern_paren = ignore # ignore/add/remove/force + +# Add or remove space after the opening of a C++ comment, +# i.e. '// A' vs. '//A'. +sp_cmt_cpp_start = ignore # ignore/add/remove/force + +# If true, space is added with sp_cmt_cpp_start will be added after doxygen +# sequences like '///', '///<', '//!' and '//!<'. +sp_cmt_cpp_doxygen = false # true/false + +# If true, space is added with sp_cmt_cpp_start will be added after Qt +# translator or meta-data comments like '//:', '//=', and '//~'. +sp_cmt_cpp_qttr = false # true/false + +# Add or remove space between #else or #endif and a trailing comment. +sp_endif_cmt = ignore # ignore/add/remove/force + +# Add or remove space after 'new', 'delete' and 'delete[]'. +sp_after_new = ignore # ignore/add/remove/force + +# Add or remove space between 'new' and '(' in 'new()'. +sp_between_new_paren = ignore # ignore/add/remove/force + +# Add or remove space between ')' and type in 'new(foo) BAR'. +sp_after_newop_paren = ignore # ignore/add/remove/force + +# Add or remove space inside parenthesis of the new operator +# as in 'new(foo) BAR'. +sp_inside_newop_paren = ignore # ignore/add/remove/force + +# Add or remove space after the open parenthesis of the new operator, +# as in 'new(foo) BAR'. +# +# Overrides sp_inside_newop_paren. +sp_inside_newop_paren_open = ignore # ignore/add/remove/force + +# Add or remove space before the close parenthesis of the new operator, +# as in 'new(foo) BAR'. +# +# Overrides sp_inside_newop_paren. +sp_inside_newop_paren_close = ignore # ignore/add/remove/force + +# Add or remove space before a trailing or embedded comment. +sp_before_tr_emb_cmt = ignore # ignore/add/remove/force + +# Number of spaces before a trailing or embedded comment. +sp_num_before_tr_emb_cmt = 0 # unsigned number + +# (Java) Add or remove space between an annotation and the open parenthesis. +sp_annotation_paren = ignore # ignore/add/remove/force + +# If true, vbrace tokens are dropped to the previous token and skipped. +sp_skip_vbrace_tokens = false # true/false + +# Add or remove space after 'noexcept'. +sp_after_noexcept = ignore # ignore/add/remove/force + +# If true, a is inserted after #define. +force_tab_after_define = false # true/false + +# +# Indenting options +# + +# The number of columns to indent per level. Usually 2, 3, 4, or 8. +# +# Default: 8 +indent_columns = 4 # unsigned number + +# The continuation indent. If non-zero, this overrides the indent of '(' and +# '=' continuation indents. Negative values are OK; negative value is absolute +# and not increased for each '(' level. +# +# For FreeBSD, this is set to 4. +indent_continue = 0 # number + +# The continuation indent, only for class header line(s). If non-zero, this +# overrides the indent of 'class' continuation indents. +indent_continue_class_head = 0 # unsigned number + +# Whether to indent empty lines (i.e. lines which contain only spaces before +# the newline character). +indent_single_newlines = false # true/false + +# The continuation indent for func_*_param if they are true. If non-zero, this +# overrides the indent. +indent_param = 0 # unsigned number + +# How to use tabs when indenting code. +# +# 0: Spaces only +# 1: Indent with tabs to brace level, align with spaces (default) +# 2: Indent and align with tabs, using spaces when not on a tabstop +# +# Default: 1 +indent_with_tabs = 0 # unsigned number + +# Whether to indent comments that are not at a brace level with tabs on a +# tabstop. Requires indent_with_tabs=2. If false, will use spaces. +indent_cmt_with_tabs = false # true/false + +# Whether to indent strings broken by '\' so that they line up. +indent_align_string = false # true/false + +# The number of spaces to indent multi-line XML strings. +# Requires indent_align_string=true. +indent_xml_string = 0 # unsigned number + +# Spaces to indent '{' from level. +indent_brace = 0 # unsigned number + +# Whether braces are indented to the body level. +indent_braces = false # true/false + +# Whether to disable indenting function braces if indent_braces=true. +indent_braces_no_func = false # true/false + +# Whether to disable indenting class braces if indent_braces=true. +indent_braces_no_class = false # true/false + +# Whether to disable indenting struct braces if indent_braces=true. +indent_braces_no_struct = false # true/false + +# Whether to indent based on the size of the brace parent, +# i.e. 'if' → 3 spaces, 'for' → 4 spaces, etc. +indent_brace_parent = false # true/false + +# Whether to indent based on the open parenthesis instead of the open brace +# in '({\n'. +indent_paren_open_brace = false # true/false + +# (C#) Whether to indent the brace of a C# delegate by another level. +indent_cs_delegate_brace = false # true/false + +# (C#) Whether to indent a C# delegate (to handle delegates with no brace) by +# another level. +indent_cs_delegate_body = false # true/false + +# Whether to indent the body of a 'namespace'. +indent_namespace = false # true/false + +# Whether to indent only the first namespace, and not any nested namespaces. +# Requires indent_namespace=true. +indent_namespace_single_indent = false # true/false + +# The number of spaces to indent a namespace block. +indent_namespace_level = 0 # unsigned number + +# If the body of the namespace is longer than this number, it won't be +# indented. Requires indent_namespace=true. 0 means no limit. +indent_namespace_limit = 0 # unsigned number + +# Whether the 'extern "C"' body is indented. +indent_extern = false # true/false + +# Whether the 'class' body is indented. +indent_class = false # true/false + +# Whether to indent the stuff after a leading base class colon. +indent_class_colon = false # true/false + +# Whether to indent based on a class colon instead of the stuff after the +# colon. Requires indent_class_colon=true. +indent_class_on_colon = false # true/false + +# Whether to indent the stuff after a leading class initializer colon. +indent_constr_colon = false # true/false + +# Virtual indent from the ':' for member initializers. +# +# Default: 2 +indent_ctor_init_leading = 2 # unsigned number + +# Additional indent for constructor initializer list. +# Negative values decrease indent down to the first column. +indent_ctor_init = 0 # number + +# Whether to indent 'if' following 'else' as a new block under the 'else'. +# If false, 'else\nif' is treated as 'else if' for indenting purposes. +indent_else_if = false # true/false + +# Amount to indent variable declarations after a open brace. +# +# <0: Relative +# ≥0: Absolute +indent_var_def_blk = 0 # number + +# Whether to indent continued variable declarations instead of aligning. +indent_var_def_cont = false # true/false + +# Whether to indent continued shift expressions ('<<' and '>>') instead of +# aligning. Set align_left_shift=false when enabling this. +indent_shift = false # true/false + +# Whether to force indentation of function definitions to start in column 1. +indent_func_def_force_col1 = false # true/false + +# Whether to indent continued function call parameters one indent level, +# rather than aligning parameters under the open parenthesis. +indent_func_call_param = false # true/false + +# Same as indent_func_call_param, but for function definitions. +indent_func_def_param = false # true/false + +# Same as indent_func_call_param, but for function prototypes. +indent_func_proto_param = false # true/false + +# Same as indent_func_call_param, but for class declarations. +indent_func_class_param = false # true/false + +# Same as indent_func_call_param, but for class variable constructors. +indent_func_ctor_var_param = false # true/false + +# Same as indent_func_call_param, but for template parameter lists. +indent_template_param = false # true/false + +# Double the indent for indent_func_xxx_param options. +# Use both values of the options indent_columns and indent_param. +indent_func_param_double = false # true/false + +# Indentation column for standalone 'const' qualifier on a function +# prototype. +indent_func_const = 0 # unsigned number + +# Indentation column for standalone 'throw' qualifier on a function +# prototype. +indent_func_throw = 0 # unsigned number + +# The number of spaces to indent a continued '->' or '.'. +# Usually set to 0, 1, or indent_columns. +indent_member = 0 # unsigned number + +# Whether lines broken at '.' or '->' should be indented by a single indent. +# The indent_member option will not be effective if this is set to true. +indent_member_single = false # true/false + +# Spaces to indent single line ('//') comments on lines before code. +indent_sing_line_comments = 0 # unsigned number + +# Whether to indent trailing single line ('//') comments relative to the code +# instead of trying to keep the same absolute column. +indent_relative_single_line_comments = false # true/false + +# Spaces to indent 'case' from 'switch'. Usually 0 or indent_columns. +indent_switch_case = 4 # unsigned number + +# Whether to indent preprocessor statements inside of switch statements. +# +# Default: true +indent_switch_pp = true # true/false + +# Spaces to shift the 'case' line, without affecting any other lines. +# Usually 0. +indent_case_shift = 0 # unsigned number + +# Spaces to indent '{' from 'case'. By default, the brace will appear under +# the 'c' in case. Usually set to 0 or indent_columns. Negative values are OK. +indent_case_brace = 0 # number + +# Whether to indent comments found in first column. +indent_col1_comment = false # true/false + +# How to indent goto labels. +# +# >0: Absolute column where 1 is the leftmost column +# ≤0: Subtract from brace indent +# +# Default: 1 +indent_label = 1 # number + +# Same as indent_label, but for access specifiers that are followed by a +# colon. +# +# Default: 1 +indent_access_spec = 1 # number + +# Whether to indent the code after an access specifier by one level. +# If true, this option forces 'indent_access_spec=0'. +indent_access_spec_body = false # true/false + +# If an open parenthesis is followed by a newline, whether to indent the next +# line so that it lines up after the open parenthesis (not recommended). +indent_paren_nl = false # true/false + +# How to indent a close parenthesis after a newline. +# +# 0: Indent to body level (default) +# 1: Align under the open parenthesis +# 2: Indent to the brace level +indent_paren_close = 0 # unsigned number + +# Whether to indent the open parenthesis of a function definition, +# if the parenthesis is on its own line. +indent_paren_after_func_def = false # true/false + +# Whether to indent the open parenthesis of a function declaration, +# if the parenthesis is on its own line. +indent_paren_after_func_decl = false # true/false + +# Whether to indent the open parenthesis of a function call, +# if the parenthesis is on its own line. +indent_paren_after_func_call = false # true/false + +# Whether to indent a comma when inside a parenthesis. +# If true, aligns under the open parenthesis. +indent_comma_paren = false # true/false + +# Whether to indent a Boolean operator when inside a parenthesis. +# If true, aligns under the open parenthesis. +indent_bool_paren = false # true/false + +# Whether to indent a semicolon when inside a for parenthesis. +# If true, aligns under the open for parenthesis. +indent_semicolon_for_paren = false # true/false + +# Whether to align the first expression to following ones +# if indent_bool_paren=true. +indent_first_bool_expr = false # true/false + +# Whether to align the first expression to following ones +# if indent_semicolon_for_paren=true. +indent_first_for_expr = false # true/false + +# If an open square is followed by a newline, whether to indent the next line +# so that it lines up after the open square (not recommended). +indent_square_nl = false # true/false + +# (ESQL/C) Whether to preserve the relative indent of 'EXEC SQL' bodies. +indent_preserve_sql = false # true/false + +# Whether to align continued statements at the '='. If false or if the '=' is +# followed by a newline, the next line is indent one tab. +# +# Default: true +indent_align_assign = false # true/false + +# Whether to align continued statements at the '('. If false or the '(' is not +# followed by a newline, the next line indent is one tab. +# +# Default: true +indent_align_paren = true # true/false + +# (OC) Whether to indent Objective-C blocks at brace level instead of usual +# rules. +indent_oc_block = false # true/false + +# (OC) Indent for Objective-C blocks in a message relative to the parameter +# name. +# +# =0: Use indent_oc_block rules +# >0: Use specified number of spaces to indent +indent_oc_block_msg = 0 # unsigned number + +# (OC) Minimum indent for subsequent parameters +indent_oc_msg_colon = 0 # unsigned number + +# (OC) Whether to prioritize aligning with initial colon (and stripping spaces +# from lines, if necessary). +# +# Default: true +indent_oc_msg_prioritize_first_colon = true # true/false + +# (OC) Whether to indent blocks the way that Xcode does by default +# (from the keyword if the parameter is on its own line; otherwise, from the +# previous indentation level). Requires indent_oc_block_msg=true. +indent_oc_block_msg_xcode_style = false # true/false + +# (OC) Whether to indent blocks from where the brace is, relative to a +# message keyword. Requires indent_oc_block_msg=true. +indent_oc_block_msg_from_keyword = false # true/false + +# (OC) Whether to indent blocks from where the brace is, relative to a message +# colon. Requires indent_oc_block_msg=true. +indent_oc_block_msg_from_colon = false # true/false + +# (OC) Whether to indent blocks from where the block caret is. +# Requires indent_oc_block_msg=true. +indent_oc_block_msg_from_caret = false # true/false + +# (OC) Whether to indent blocks from where the brace caret is. +# Requires indent_oc_block_msg=true. +indent_oc_block_msg_from_brace = false # true/false + +# When indenting after virtual brace open and newline add further spaces to +# reach this minimum indent. +indent_min_vbrace_open = 0 # unsigned number + +# Whether to add further spaces after regular indent to reach next tabstop +# when identing after virtual brace open and newline. +indent_vbrace_open_on_tabstop = false # true/false + +# How to indent after a brace followed by another token (not a newline). +# true: indent all contained lines to match the token +# false: indent all contained lines to match the brace +# +# Default: true +indent_token_after_brace = true # true/false + +# Whether to indent the body of a C++11 lambda. +indent_cpp_lambda_body = false # true/false + +# (C#) Whether to indent a 'using' block if no braces are used. +# +# Default: true +indent_using_block = true # true/false + +# How to indent the continuation of ternary operator. +# +# 0: Off (default) +# 1: When the `if_false` is a continuation, indent it under `if_false` +# 2: When the `:` is a continuation, indent it under `?` +indent_ternary_operator = 0 # unsigned number + +# If true, the indentation of the chunks after a `return new` sequence will be set at return indentation column. +indent_off_after_return_new = false # true/false + +# If true, the tokens after return are indented with regular single indentation. By default (false) the indentation is after the return token. +indent_single_after_return = false # true/false + +# Whether to ignore indent and alignment for 'asm' blocks (i.e. assume they +# have their own indentation). +indent_ignore_asm_block = false # true/false + +# +# Newline adding and removing options +# + +# Whether to collapse empty blocks between '{' and '}'. +nl_collapse_empty_body = false # true/false + +# Don't split one-line braced assignments, as in 'foo_t f = { 1, 2 };'. +nl_assign_leave_one_liners = false # true/false + +# Don't split one-line braced statements inside a 'class xx { }' body. +nl_class_leave_one_liners = false # true/false + +# Don't split one-line enums, as in 'enum foo { BAR = 15 };' +nl_enum_leave_one_liners = false # true/false + +# Don't split one-line get or set functions. +nl_getset_leave_one_liners = false # true/false + +# (C#) Don't split one-line property get or set functions. +nl_cs_property_leave_one_liners = false # true/false + +# Don't split one-line function definitions, as in 'int foo() { return 0; }'. +nl_func_leave_one_liners = false # true/false + +# Don't split one-line C++11 lambdas, as in '[]() { return 0; }'. +nl_cpp_lambda_leave_one_liners = false # true/false + +# Don't split one-line if/else statements, as in 'if(...) b++;'. +nl_if_leave_one_liners = false # true/false + +# Don't split one-line while statements, as in 'while(...) b++;'. +nl_while_leave_one_liners = false # true/false + +# Don't split one-line for statements, as in 'for(...) b++;'. +nl_for_leave_one_liners = false # true/false + +# (OC) Don't split one-line Objective-C messages. +nl_oc_msg_leave_one_liner = false # true/false + +# (OC) Add or remove newline between method declaration and '{'. +nl_oc_mdef_brace = ignore # ignore/add/remove/force + +# (OC) Add or remove newline between Objective-C block signature and '{'. +nl_oc_block_brace = ignore # ignore/add/remove/force + +# (OC) Add or remove newline between '@interface' and '{'. +nl_oc_interface_brace = ignore # ignore/add/remove/force + +# (OC) Add or remove newline between '@implementation' and '{'. +nl_oc_implementation_brace = ignore # ignore/add/remove/force + +# Add or remove newlines at the start of the file. +nl_start_of_file = ignore # ignore/add/remove/force + +# The minimum number of newlines at the start of the file (only used if +# nl_start_of_file is 'add' or 'force'). +nl_start_of_file_min = 0 # unsigned number + +# Add or remove newline at the end of the file. +nl_end_of_file = ignore # ignore/add/remove/force + +# The minimum number of newlines at the end of the file (only used if +# nl_end_of_file is 'add' or 'force'). +nl_end_of_file_min = 0 # unsigned number + +# Add or remove newline between '=' and '{'. +nl_assign_brace = remove # ignore/add/remove/force + +# (D) Add or remove newline between '=' and '['. +nl_assign_square = ignore # ignore/add/remove/force + +# Add or remove newline between '[]' and '{'. +nl_tsquare_brace = ignore # ignore/add/remove/force + +# (D) Add or remove newline after '= ['. Will also affect the newline before +# the ']'. +nl_after_square_assign = ignore # ignore/add/remove/force + +# The number of blank lines after a block of variable definitions at the top +# of a function body. +# +# 0 = No change (default). +nl_func_var_def_blk = 0 # unsigned number + +# The number of newlines before a block of typedefs. If nl_after_access_spec +# is non-zero, that option takes precedence. +# +# 0 = No change (default). +nl_typedef_blk_start = 0 # unsigned number + +# The number of newlines after a block of typedefs. +# +# 0 = No change (default). +nl_typedef_blk_end = 0 # unsigned number + +# The maximum number of consecutive newlines within a block of typedefs. +# +# 0 = No change (default). +nl_typedef_blk_in = 0 # unsigned number + +# The number of newlines before a block of variable definitions not at the top +# of a function body. If nl_after_access_spec is non-zero, that option takes +# precedence. +# +# 0 = No change (default). +nl_var_def_blk_start = 0 # unsigned number + +# The number of newlines after a block of variable definitions not at the top +# of a function body. +# +# 0 = No change (default). +nl_var_def_blk_end = 0 # unsigned number + +# The maximum number of consecutive newlines within a block of variable +# definitions. +# +# 0 = No change (default). +nl_var_def_blk_in = 0 # unsigned number + +# Add or remove newline between a function call's ')' and '{', as in +# 'list_for_each(item, &list) { }'. +nl_fcall_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'enum' and '{'. +nl_enum_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'enum' and 'class'. +nl_enum_class = ignore # ignore/add/remove/force + +# Add or remove newline between 'enum class' and the identifier. +nl_enum_class_identifier = ignore # ignore/add/remove/force + +# Add or remove newline between 'enum class' type and ':'. +nl_enum_identifier_colon = ignore # ignore/add/remove/force + +# Add or remove newline between 'enum class identifier :' and type. +nl_enum_colon_type = ignore # ignore/add/remove/force + +# Add or remove newline between 'struct and '{'. +nl_struct_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'union' and '{'. +nl_union_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'if' and '{'. +nl_if_brace = remove # ignore/add/remove/force + +# Add or remove newline between '}' and 'else'. +nl_brace_else = remove # ignore/add/remove/force + +# Add or remove newline between 'else if' and '{'. If set to ignore, +# nl_if_brace is used instead. +nl_elseif_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'else' and '{'. +nl_else_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'else' and 'if'. +nl_else_if = ignore # ignore/add/remove/force + +# Add or remove newline before 'if'/'else if' closing parenthesis. +nl_before_if_closing_paren = ignore # ignore/add/remove/force + +# Add or remove newline between '}' and 'finally'. +nl_brace_finally = ignore # ignore/add/remove/force + +# Add or remove newline between 'finally' and '{'. +nl_finally_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'try' and '{'. +nl_try_brace = ignore # ignore/add/remove/force + +# Add or remove newline between get/set and '{'. +nl_getset_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'for' and '{'. +nl_for_brace = remove # ignore/add/remove/force + +# Add or remove newline before the '{' of a 'catch' statement, as in +# 'catch (decl) {'. +nl_catch_brace = ignore # ignore/add/remove/force + +# (OC) Add or remove newline before the '{' of a '@catch' statement, as in +# '@catch (decl) {'. If set to ignore, nl_catch_brace is used. +nl_oc_catch_brace = ignore # ignore/add/remove/force + +# Add or remove newline between '}' and 'catch'. +nl_brace_catch = ignore # ignore/add/remove/force + +# (OC) Add or remove newline between '}' and '@catch'. If set to ignore, +# nl_brace_catch is used. +nl_oc_brace_catch = ignore # ignore/add/remove/force + +# Add or remove newline between '}' and ']'. +nl_brace_square = ignore # ignore/add/remove/force + +# Add or remove newline between '}' and ')' in a function invocation. +nl_brace_fparen = ignore # ignore/add/remove/force + +# Add or remove newline between 'while' and '{'. +nl_while_brace = remove # ignore/add/remove/force + +# (D) Add or remove newline between 'scope (x)' and '{'. +nl_scope_brace = ignore # ignore/add/remove/force + +# (D) Add or remove newline between 'unittest' and '{'. +nl_unittest_brace = ignore # ignore/add/remove/force + +# (D) Add or remove newline between 'version (x)' and '{'. +nl_version_brace = ignore # ignore/add/remove/force + +# (C#) Add or remove newline between 'using' and '{'. +nl_using_brace = ignore # ignore/add/remove/force + +# Add or remove newline between two open or close braces. Due to general +# newline/brace handling, REMOVE may not work. +nl_brace_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'do' and '{'. +nl_do_brace = remove # ignore/add/remove/force + +# Add or remove newline between '}' and 'while' of 'do' statement. +nl_brace_while = remove # ignore/add/remove/force + +# Add or remove newline between 'switch' and '{'. +nl_switch_brace = remove # ignore/add/remove/force + +# Add or remove newline between 'synchronized' and '{'. +nl_synchronized_brace = ignore # ignore/add/remove/force + +# Add a newline between ')' and '{' if the ')' is on a different line than the +# if/for/etc. +# +# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch and +# nl_catch_brace. +nl_multi_line_cond = false # true/false + +# Force a newline in a define after the macro name for multi-line defines. +nl_multi_line_define = false # true/false + +# Whether to add a newline before 'case', and a blank line before a 'case' +# statement that follows a ';' or '}'. +nl_before_case = false # true/false + +# Whether to add a newline after a 'case' statement. +nl_after_case = false # true/false + +# Add or remove newline between a case ':' and '{'. +# +# Overrides nl_after_case. +nl_case_colon_brace = ignore # ignore/add/remove/force + +# Add or remove newline between ')' and 'throw'. +nl_before_throw = ignore # ignore/add/remove/force + +# Add or remove newline between 'namespace' and '{'. +nl_namespace_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'template<>' and whatever follows. +nl_template_class = ignore # ignore/add/remove/force + +# Add or remove newline between 'class' and '{'. +nl_class_brace = ignore # ignore/add/remove/force + +# Add or remove newline before or after (depending on pos_class_comma) each +# ',' in the base class list. +nl_class_init_args = ignore # ignore/add/remove/force + +# Add or remove newline after each ',' in the constructor member +# initialization. Related to nl_constr_colon, pos_constr_colon and +# pos_constr_comma. +nl_constr_init_args = ignore # ignore/add/remove/force + +# Add or remove newline before first element, after comma, and after last +# element, in 'enum'. +nl_enum_own_lines = ignore # ignore/add/remove/force + +# Add or remove newline between return type and function name in a function +# definition. +nl_func_type_name = ignore # ignore/add/remove/force + +# Add or remove newline between return type and function name inside a class +# definition. If set to ignore, nl_func_type_name or nl_func_proto_type_name +# is used instead. +nl_func_type_name_class = ignore # ignore/add/remove/force + +# Add or remove newline between class specification and '::' +# in 'void A::f() { }'. Only appears in separate member implementation (does +# not appear with in-line implementation). +nl_func_class_scope = ignore # ignore/add/remove/force + +# Add or remove newline between function scope and name, as in +# 'void A :: f() { }'. +nl_func_scope_name = ignore # ignore/add/remove/force + +# Add or remove newline between return type and function name in a prototype. +nl_func_proto_type_name = ignore # ignore/add/remove/force + +# Add or remove newline between a function name and the opening '(' in the +# declaration. +nl_func_paren = ignore # ignore/add/remove/force + +# Overrides nl_func_paren for functions with no parameters. +nl_func_paren_empty = ignore # ignore/add/remove/force + +# Add or remove newline between a function name and the opening '(' in the +# definition. +nl_func_def_paren = ignore # ignore/add/remove/force + +# Overrides nl_func_def_paren for functions with no parameters. +nl_func_def_paren_empty = ignore # ignore/add/remove/force + +# Add or remove newline between a function name and the opening '(' in the +# call. +nl_func_call_paren = ignore # ignore/add/remove/force + +# Overrides nl_func_call_paren for functions with no parameters. +nl_func_call_paren_empty = ignore # ignore/add/remove/force + +# Add or remove newline after '(' in a function declaration. +nl_func_decl_start = ignore # ignore/add/remove/force + +# Add or remove newline after '(' in a function definition. +nl_func_def_start = ignore # ignore/add/remove/force + +# Overrides nl_func_decl_start when there is only one parameter. +nl_func_decl_start_single = ignore # ignore/add/remove/force + +# Overrides nl_func_def_start when there is only one parameter. +nl_func_def_start_single = ignore # ignore/add/remove/force + +# Whether to add a newline after '(' in a function declaration if '(' and ')' +# are in different lines. If false, nl_func_decl_start is used instead. +nl_func_decl_start_multi_line = false # true/false + +# Whether to add a newline after '(' in a function definition if '(' and ')' +# are in different lines. If false, nl_func_def_start is used instead. +nl_func_def_start_multi_line = false # true/false + +# Add or remove newline after each ',' in a function declaration. +nl_func_decl_args = ignore # ignore/add/remove/force + +# Add or remove newline after each ',' in a function definition. +nl_func_def_args = ignore # ignore/add/remove/force + +# Whether to add a newline after each ',' in a function declaration if '(' +# and ')' are in different lines. If false, nl_func_decl_args is used instead. +nl_func_decl_args_multi_line = false # true/false + +# Whether to add a newline after each ',' in a function definition if '(' +# and ')' are in different lines. If false, nl_func_def_args is used instead. +nl_func_def_args_multi_line = false # true/false + +# Add or remove newline before the ')' in a function declaration. +nl_func_decl_end = ignore # ignore/add/remove/force + +# Add or remove newline before the ')' in a function definition. +nl_func_def_end = ignore # ignore/add/remove/force + +# Overrides nl_func_decl_end when there is only one parameter. +nl_func_decl_end_single = ignore # ignore/add/remove/force + +# Overrides nl_func_def_end when there is only one parameter. +nl_func_def_end_single = ignore # ignore/add/remove/force + +# Whether to add a newline before ')' in a function declaration if '(' and ')' +# are in different lines. If false, nl_func_decl_end is used instead. +nl_func_decl_end_multi_line = false # true/false + +# Whether to add a newline before ')' in a function definition if '(' and ')' +# are in different lines. If false, nl_func_def_end is used instead. +nl_func_def_end_multi_line = false # true/false + +# Add or remove newline between '()' in a function declaration. +nl_func_decl_empty = ignore # ignore/add/remove/force + +# Add or remove newline between '()' in a function definition. +nl_func_def_empty = ignore # ignore/add/remove/force + +# Add or remove newline between '()' in a function call. +nl_func_call_empty = ignore # ignore/add/remove/force + +# Whether to add a newline after '(' in a function call if '(' and ')' are in +# different lines. +nl_func_call_start_multi_line = false # true/false + +# Whether to add a newline after each ',' in a function call if '(' and ')' +# are in different lines. +nl_func_call_args_multi_line = false # true/false + +# Whether to add a newline before ')' in a function call if '(' and ')' are in +# different lines. +nl_func_call_end_multi_line = false # true/false + +# (OC) Whether to put each Objective-C message parameter on a separate line. +# See nl_oc_msg_leave_one_liner. +nl_oc_msg_args = false # true/false + +# Add or remove newline between function signature and '{'. +nl_fdef_brace = force # ignore/add/remove/force + +# Add or remove newline between C++11 lambda signature and '{'. +nl_cpp_ldef_brace = ignore # ignore/add/remove/force + +# Add or remove newline between 'return' and the return expression. +nl_return_expr = ignore # ignore/add/remove/force + +# Whether to add a newline after semicolons, except in 'for' statements. +nl_after_semicolon = false # true/false + +# (Java) Add or remove newline between the ')' and '{{' of the double brace +# initializer. +nl_paren_dbrace_open = ignore # ignore/add/remove/force + +# Whether to add a newline after the type in an unnamed temporary +# direct-list-initialization. +nl_type_brace_init_lst = ignore # ignore/add/remove/force + +# Whether to add a newline after the open brace in an unnamed temporary +# direct-list-initialization. +nl_type_brace_init_lst_open = ignore # ignore/add/remove/force + +# Whether to add a newline before the close brace in an unnamed temporary +# direct-list-initialization. +nl_type_brace_init_lst_close = ignore # ignore/add/remove/force + +# Whether to add a newline after '{'. This also adds a newline before the +# matching '}'. +nl_after_brace_open = false # true/false + +# Whether to add a newline between the open brace and a trailing single-line +# comment. Requires nl_after_brace_open=true. +nl_after_brace_open_cmt = false # true/false + +# Whether to add a newline after a virtual brace open with a non-empty body. +# These occur in un-braced if/while/do/for statement bodies. +nl_after_vbrace_open = false # true/false + +# Whether to add a newline after a virtual brace open with an empty body. +# These occur in un-braced if/while/do/for statement bodies. +nl_after_vbrace_open_empty = false # true/false + +# Whether to add a newline after '}'. Does not apply if followed by a +# necessary ';'. +nl_after_brace_close = false # true/false + +# Whether to add a newline after a virtual brace close, +# as in 'if (foo) a++; return;'. +nl_after_vbrace_close = false # true/false + +# Add or remove newline between the close brace and identifier, +# as in 'struct { int a; } b;'. Affects enumerations, unions and +# structures. If set to ignore, uses nl_after_brace_close. +nl_brace_struct_var = ignore # ignore/add/remove/force + +# Whether to alter newlines in '#define' macros. +nl_define_macro = false # true/false + +# Whether to alter newlines between consecutive parenthesis closes. The number +# of closing parentheses in a line will depend on respective open parenthesis +# lines. +nl_squeeze_paren_close = false # true/false + +# Whether to remove blanks after '#ifxx' and '#elxx', or before '#elxx' and +# '#endif'. Does not affect top-level #ifdefs. +nl_squeeze_ifdef = false # true/false + +# Makes the nl_squeeze_ifdef option affect the top-level #ifdefs as well. +nl_squeeze_ifdef_top_level = false # true/false + +# Add or remove blank line before 'if'. +nl_before_if = force # ignore/add/remove/force + +# Add or remove blank line after 'if' statement. Add/Force work only if the +# next token is not a closing brace. +nl_after_if = force # ignore/add/remove/force + +# Add or remove blank line before 'for'. +nl_before_for = force # ignore/add/remove/force + +# Add or remove blank line after 'for' statement. +nl_after_for = force # ignore/add/remove/force + +# Add or remove blank line before 'while'. +nl_before_while = force # ignore/add/remove/force + +# Add or remove blank line after 'while' statement. +nl_after_while = force # ignore/add/remove/force + +# Add or remove blank line before 'switch'. +nl_before_switch = force # ignore/add/remove/force + +# Add or remove blank line after 'switch' statement. +nl_after_switch = force # ignore/add/remove/force + +# Add or remove blank line before 'synchronized'. +nl_before_synchronized = ignore # ignore/add/remove/force + +# Add or remove blank line after 'synchronized' statement. +nl_after_synchronized = ignore # ignore/add/remove/force + +# Add or remove blank line before 'do'. +nl_before_do = force # ignore/add/remove/force + +# Add or remove blank line after 'do/while' statement. +nl_after_do = force # ignore/add/remove/force + +# Whether to double-space commented-entries in 'struct'/'union'/'enum'. +nl_ds_struct_enum_cmt = false # true/false + +# Whether to force a newline before '}' of a 'struct'/'union'/'enum'. +# (Lower priority than eat_blanks_before_close_brace.) +nl_ds_struct_enum_close_brace = false # true/false + +# Add or remove newline before or after (depending on pos_class_colon) a class +# colon, as in 'class Foo : public Bar'. +nl_class_colon = ignore # ignore/add/remove/force + +# Add or remove newline around a class constructor colon. The exact position +# depends on nl_constr_init_args, pos_constr_colon and pos_constr_comma. +nl_constr_colon = ignore # ignore/add/remove/force + +# Whether to collapse a two-line namespace, like 'namespace foo\n{ decl; }' +# into a single line. If true, prevents other brace newline rules from turning +# such code into four lines. +nl_namespace_two_to_one_liner = false # true/false + +# Whether to remove a newline in simple unbraced if statements, turning them +# into one-liners, as in 'if(b)\n i++;' → 'if(b) i++;'. +nl_create_if_one_liner = false # true/false + +# Whether to remove a newline in simple unbraced for statements, turning them +# into one-liners, as in 'for (...)\n stmt;' → 'for (...) stmt;'. +nl_create_for_one_liner = false # true/false + +# Whether to remove a newline in simple unbraced while statements, turning +# them into one-liners, as in 'while (expr)\n stmt;' → 'while (expr) stmt;'. +nl_create_while_one_liner = false # true/false + +# Whether to collapse a function definition whose body (not counting braces) +# is only one line so that the entire definition (prototype, braces, body) is +# a single line. +nl_create_func_def_one_liner = false # true/false + +# Whether to split one-line simple unbraced if statements into two lines by +# adding a newline, as in 'if(b) i++;'. +nl_split_if_one_liner = false # true/false + +# Whether to split one-line simple unbraced for statements into two lines by +# adding a newline, as in 'for (...) stmt;'. +nl_split_for_one_liner = false # true/false + +# Whether to split one-line simple unbraced while statements into two lines by +# adding a newline, as in 'while (expr) stmt;'. +nl_split_while_one_liner = false # true/false + +# +# Blank line options +# + +# The maximum number of consecutive newlines (3 = 2 blank lines). +nl_max = 0 # unsigned number + +# The maximum number of consecutive newlines in a function. +nl_max_blank_in_func = 0 # unsigned number + +# The number of newlines before a function prototype. +nl_before_func_body_proto = 0 # unsigned number + +# The number of newlines before a multi-line function definition. +nl_before_func_body_def = 0 # unsigned number + +# The number of newlines before a class constructor/destructor prototype. +nl_before_func_class_proto = 0 # unsigned number + +# The number of newlines before a class constructor/destructor definition. +nl_before_func_class_def = 0 # unsigned number + +# The number of newlines after a function prototype. +nl_after_func_proto = 0 # unsigned number + +# The number of newlines after a function prototype, if not followed by +# another function prototype. +nl_after_func_proto_group = 0 # unsigned number + +# The number of newlines after a class constructor/destructor prototype. +nl_after_func_class_proto = 0 # unsigned number + +# The number of newlines after a class constructor/destructor prototype, +# if not followed by another constructor/destructor prototype. +nl_after_func_class_proto_group = 0 # unsigned number + +# Whether one-line method definitions inside a class body should be treated +# as if they were prototypes for the purposes of adding newlines. +# +# Requires nl_class_leave_one_liners=true. Overrides nl_before_func_body_def +# and nl_before_func_class_def for one-liners. +nl_class_leave_one_liner_groups = false # true/false + +# The number of newlines after '}' of a multi-line function body. +nl_after_func_body = 0 # unsigned number + +# The number of newlines after '}' of a multi-line function body in a class +# declaration. Also affects class constructors/destructors. +# +# Overrides nl_after_func_body. +nl_after_func_body_class = 0 # unsigned number + +# The number of newlines after '}' of a single line function body. Also +# affects class constructors/destructors. +# +# Overrides nl_after_func_body and nl_after_func_body_class. +nl_after_func_body_one_liner = 0 # unsigned number + +# The minimum number of newlines before a multi-line comment. +# Doesn't apply if after a brace open or another multi-line comment. +nl_before_block_comment = 0 # unsigned number + +# The minimum number of newlines before a single-line C comment. +# Doesn't apply if after a brace open or other single-line C comments. +nl_before_c_comment = 0 # unsigned number + +# The minimum number of newlines before a CPP comment. +# Doesn't apply if after a brace open or other CPP comments. +nl_before_cpp_comment = 0 # unsigned number + +# Whether to force a newline after a multi-line comment. +nl_after_multiline_comment = false # true/false + +# Whether to force a newline after a label's colon. +nl_after_label_colon = false # true/false + +# The number of newlines after '}' or ';' of a struct/enum/union definition. +nl_after_struct = 0 # unsigned number + +# The number of newlines before a class definition. +nl_before_class = 0 # unsigned number + +# The number of newlines after '}' or ';' of a class definition. +nl_after_class = 0 # unsigned number + +# The number of newlines before an access specifier label. This also includes +# the Qt-specific 'signals:' and 'slots:'. Will not change the newline count +# if after a brace open. +# +# 0 = No change (default). +nl_before_access_spec = 0 # unsigned number + +# The number of newlines after an access specifier label. This also includes +# the Qt-specific 'signals:' and 'slots:'. Will not change the newline count +# if after a brace open. +# +# 0 = No change (default). +# +# Overrides nl_typedef_blk_start and nl_var_def_blk_start. +nl_after_access_spec = 0 # unsigned number + +# The number of newlines between a function definition and the function +# comment, as in '// comment\n void foo() {...}'. +# +# 0 = No change (default). +nl_comment_func_def = 0 # unsigned number + +# The number of newlines after a try-catch-finally block that isn't followed +# by a brace close. +# +# 0 = No change (default). +nl_after_try_catch_finally = 0 # unsigned number + +# (C#) The number of newlines before and after a property, indexer or event +# declaration. +# +# 0 = No change (default). +nl_around_cs_property = 0 # unsigned number + +# (C#) The number of newlines between the get/set/add/remove handlers. +# +# 0 = No change (default). +nl_between_get_set = 0 # unsigned number + +# (C#) Add or remove newline between property and the '{'. +nl_property_brace = ignore # ignore/add/remove/force + +# The number of newlines after '{' of a namespace. This also adds newlines +# before the matching '}'. +# +# 0 = Apply eat_blanks_after_open_brace or eat_blanks_before_close_brace if +# applicable, otherwise no change. +# +# Overrides eat_blanks_after_open_brace and eat_blanks_before_close_brace. +nl_inside_namespace = 0 # unsigned number + +# Whether to remove blank lines after '{'. +eat_blanks_after_open_brace = false # true/false + +# Whether to remove blank lines before '}'. +eat_blanks_before_close_brace = true # true/false + +# How aggressively to remove extra newlines not in preprocessor. +# +# 0: No change (default) +# 1: Remove most newlines not handled by other config +# 2: Remove all newlines and reformat completely by config +nl_remove_extra_newlines = 0 # unsigned number + +# Whether to put a blank line before 'return' statements, unless after an open +# brace. +nl_before_return = false # true/false + +# Whether to put a blank line after 'return' statements, unless followed by a +# close brace. +nl_after_return = false # true/false + +# (Java) Add or remove newline after an annotation statement. Only affects +# annotations that are after a newline. +nl_after_annotation = ignore # ignore/add/remove/force + +# (Java) Add or remove newline between two annotations. +nl_between_annotation = ignore # ignore/add/remove/force + +# +# Positioning options +# + +# The position of arithmetic operators in wrapped expressions. +pos_arith = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force + +# The position of assignment in wrapped expressions. Do not affect '=' +# followed by '{'. +pos_assign = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force + +# The position of Boolean operators in wrapped expressions. +pos_bool = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force + +# The position of comparison operators in wrapped expressions. +pos_compare = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force + +# The position of conditional operators, as in the '?' and ':' of +# 'expr ? stmt : stmt', in wrapped expressions. +pos_conditional = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force + +# The position of the comma in wrapped expressions. +pos_comma = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force + +# The position of the comma in enum entries. +pos_enum_comma = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force + +# The position of the comma in the base class list if there is more than one +# line. Affects nl_class_init_args. +pos_class_comma = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force + +# The position of the comma in the constructor initialization list. +# Related to nl_constr_colon, nl_constr_init_args and pos_constr_colon. +pos_constr_comma = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force + +# The position of trailing/leading class colon, between class and base class +# list. Affects nl_class_colon. +pos_class_colon = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force + +# The position of colons between constructor and member initialization. +# Related to nl_constr_colon, nl_constr_init_args and pos_constr_comma. +pos_constr_colon = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force + +# +# Line splitting options +# + +# Try to limit code width to N columns. +code_width = 100 # unsigned number + +# Whether to fully split long 'for' statements at semi-colons. +ls_for_split_full = true # true/false + +# Whether to fully split long function prototypes/calls at commas. +ls_func_split_full = true # true/false + +# Whether to split lines as close to code_width as possible and ignore some +# groupings. +ls_code_width = false # true/false + +# +# Code alignment options (not left column spaces/tabs) +# + +# Whether to keep non-indenting tabs. +align_keep_tabs = false # true/false + +# Whether to use tabs for aligning. +align_with_tabs = false # true/false + +# Whether to bump out to the next tab when aligning. +align_on_tabstop = false # true/false + +# Whether to right-align numbers. +align_number_right = false # true/false + +# Whether to keep whitespace not required for alignment. +align_keep_extra_space = false # true/false + +# Whether to align variable definitions in prototypes and functions. +align_func_params = false # true/false + +# The span for aligning parameter definitions in function on parameter name. +# +# 0 = Don't align (default). +align_func_params_span = 0 # unsigned number + +# The threshold for aligning function parameter definitions. +# +# 0 = No limit (default). +align_func_params_thresh = 0 # unsigned number + +# The gap for aligning function parameter definitions. +align_func_params_gap = 0 # unsigned number + +# Whether to align parameters in single-line functions that have the same +# name. The function names must already be aligned with each other. +align_same_func_call_params = false # true/false + +# The span for aligning function-call parameters for single line functions. +# +# 0 = Don't align (default). +align_same_func_call_params_span = 0 # unsigned number + +# The threshold for aligning function-call parameters for single line +# functions. +# +# 0 = No limit (default). +align_same_func_call_params_thresh = 0 # unsigned number + +# The span for aligning variable definitions. +# +# 0 = Don't align (default). +align_var_def_span = 0 # unsigned number + +# How to align the '*' in variable definitions. +# +# 0: Part of the type 'void * foo;' (default) +# 1: Part of the variable 'void *foo;' +# 2: Dangling 'void *foo;' +align_var_def_star_style = 0 # unsigned number + +# How to align the '&' in variable definitions. +# +# 0: Part of the type 'long & foo;' (default) +# 1: Part of the variable 'long &foo;' +# 2: Dangling 'long &foo;' +align_var_def_amp_style = 0 # unsigned number + +# The threshold for aligning variable definitions. +# +# 0 = No limit (default). +align_var_def_thresh = 0 # unsigned number + +# The gap for aligning variable definitions. +align_var_def_gap = 0 # unsigned number + +# Whether to align the colon in struct bit fields. +align_var_def_colon = false # true/false + +# The gap for aligning the colon in struct bit fields. +align_var_def_colon_gap = 0 # unsigned number + +# Whether to align any attribute after the variable name. +align_var_def_attribute = false # true/false + +# Whether to align inline struct/enum/union variable definitions. +align_var_def_inline = false # true/false + +# The span for aligning on '=' in assignments. +# +# 0 = Don't align (default). +align_assign_span = 0 # unsigned number + +# The threshold for aligning on '=' in assignments. +# +# 0 = No limit (default). +align_assign_thresh = 0 # unsigned number + +# How to apply align_assign_span to function declaration "assignments", i.e. +# 'virtual void foo() = 0' or '~foo() = {default|delete}'. +# +# 0: Align with other assignments (default) +# 1: Align with each other, ignoring regular assignments +# 2: Don't align +align_assign_decl_func = 0 # unsigned number + +# The span for aligning on '=' in enums. +# +# 0 = Don't align (default). +align_enum_equ_span = 0 # unsigned number + +# The threshold for aligning on '=' in enums. +# +# 0 = no limit (default). +align_enum_equ_thresh = 0 # unsigned number + +# The span for aligning class member definitions. +# +# 0 = Don't align (default). +align_var_class_span = 0 # unsigned number + +# The threshold for aligning class member definitions. +# +# 0 = No limit (default). +align_var_class_thresh = 0 # unsigned number + +# The gap for aligning class member definitions. +align_var_class_gap = 0 # unsigned number + +# The span for aligning struct/union member definitions. +# +# 0 = Don't align (default). +align_var_struct_span = 0 # unsigned number + +# The threshold for aligning struct/union member definitions. +# +# 0 = No limit (default). +align_var_struct_thresh = 0 # unsigned number + +# The gap for aligning struct/union member definitions. +align_var_struct_gap = 0 # unsigned number + +# The span for aligning struct initializer values. +# +# 0 = Don't align (default). +align_struct_init_span = 0 # unsigned number + +# The minimum space between the type and the synonym of a typedef. +align_typedef_gap = 0 # unsigned number + +# The span for aligning single-line typedefs. +# +# 0 = Don't align (default). +align_typedef_span = 0 # unsigned number + +# How to align typedef'd functions with other typedefs. +# +# 0: Don't mix them at all (default) +# 1: Align the open parenthesis with the types +# 2: Align the function type name with the other type names +align_typedef_func = 0 # unsigned number + +# How to align the '*' in typedefs. +# +# 0: Align on typedef type, ignore '*' (default) +# 1: The '*' is part of type name: 'typedef int *pint;' +# 2: The '*' is part of the type, but dangling: 'typedef int *pint;' +align_typedef_star_style = 0 # unsigned number + +# How to align the '&' in typedefs. +# +# 0: Align on typedef type, ignore '&' (default) +# 1: The '&' is part of type name: 'typedef int &pint;' +# 2: The '&' is part of the type, but dangling: 'typedef int &pint;' +align_typedef_amp_style = 0 # unsigned number + +# The span for aligning comments that end lines. +# +# 0 = Don't align (default). +align_right_cmt_span = 2 # unsigned number + +# If aligning comments, whether to mix with comments after '}' and #endif with +# less than three spaces before the comment. +align_right_cmt_mix = false # true/false + +# Whether to only align trailing comments that are at the same brace level. +align_right_cmt_same_level = false # true/false + +# Minimum number of columns between preceding text and a trailing comment in +# order for the comment to qualify for being aligned. Must be non-zero to have +# an effect. +align_right_cmt_gap = 0 # unsigned number + +# Minimum column at which to align trailing comments. Comments which are +# aligned beyond this column, but which can be aligned in a lesser column, +# may be "pulled in". +# +# 0 = Ignore (default). +align_right_cmt_at_col = 0 # unsigned number + +# The span for aligning function prototypes. +# +# 0 = Don't align (default). +align_func_proto_span = 0 # unsigned number + +# Minimum gap between the return type and the function name. +align_func_proto_gap = 0 # unsigned number + +# Whether to align function prototypes on the 'operator' keyword instead of +# what follows. +align_on_operator = false # true/false + +# Whether to mix aligning prototype and variable declarations. If true, +# align_var_def_XXX options are used instead of align_func_proto_XXX options. +align_mix_var_proto = false # true/false + +# Whether to align single-line functions with function prototypes. +# Uses align_func_proto_span. +align_single_line_func = false # true/false + +# Whether to align the open brace of single-line functions. +# Requires align_single_line_func=true. Uses align_func_proto_span. +align_single_line_brace = false # true/false + +# Gap for align_single_line_brace. +align_single_line_brace_gap = 0 # unsigned number + +# (OC) The span for aligning Objective-C message specifications. +# +# 0 = Don't align (default). +align_oc_msg_spec_span = 0 # unsigned number + +# Whether to align macros wrapped with a backslash and a newline. This will +# not work right if the macro contains a multi-line comment. +align_nl_cont = false # true/false + +# Whether to align macro functions and variables together. +align_pp_define_together = false # true/false + +# The minimum space between label and value of a preprocessor define. +align_pp_define_gap = 0 # unsigned number + +# The span for aligning on '#define' bodies. +# +# =0: Don't align (default) +# >0: Number of lines (including comments) between blocks +align_pp_define_span = 0 # unsigned number + +# Whether to align lines that start with '<<' with previous '<<'. +# +# Default: true +align_left_shift = true # true/false + +# Whether to align text after 'asm volatile ()' colons. +align_asm_colon = false # true/false + +# (OC) Span for aligning parameters in an Objective-C message call +# on the ':'. +# +# 0 = Don't align. +align_oc_msg_colon_span = 0 # unsigned number + +# (OC) Whether to always align with the first parameter, even if it is too +# short. +align_oc_msg_colon_first = false # true/false + +# (OC) Whether to align parameters in an Objective-C '+' or '-' declaration +# on the ':'. +align_oc_decl_colon = false # true/false + +# +# Comment modification options +# + +# Try to wrap comments at N columns. +cmt_width = 0 # unsigned number + +# How to reflow comments. +# +# 0: No reflowing (apart from the line wrapping due to cmt_width) (default) +# 1: No touching at all +# 2: Full reflow +cmt_reflow_mode = 0 # unsigned number + +# Whether to convert all tabs to spaces in comments. If false, tabs in +# comments are left alone, unless used for indenting. +cmt_convert_tab_to_spaces = true # true/false + +# Whether to apply changes to multi-line comments, including cmt_width, +# keyword substitution and leading chars. +# +# Default: true +cmt_indent_multi = true # true/false + +# Whether to group c-comments that look like they are in a block. +cmt_c_group = false # true/false + +# Whether to put an empty '/*' on the first line of the combined c-comment. +cmt_c_nl_start = false # true/false + +# Whether to add a newline before the closing '*/' of the combined c-comment. +cmt_c_nl_end = false # true/false + +# Whether to change cpp-comments into c-comments. +cmt_cpp_to_c = true # true/false + +# Whether to group cpp-comments that look like they are in a block. Only +# meaningful if cmt_cpp_to_c=true. +cmt_cpp_group = false # true/false + +# Whether to put an empty '/*' on the first line of the combined cpp-comment +# when converting to a c-comment. +# +# Requires cmt_cpp_to_c=true and cmt_cpp_group=true. +cmt_cpp_nl_start = false # true/false + +# Whether to add a newline before the closing '*/' of the combined cpp-comment +# when converting to a c-comment. +# +# Requires cmt_cpp_to_c=true and cmt_cpp_group=true. +cmt_cpp_nl_end = false # true/false + +# Whether to put a star on subsequent comment lines. +cmt_star_cont = true # true/false + +# The number of spaces to insert at the start of subsequent comment lines. +cmt_sp_before_star_cont = 0 # unsigned number + +# The number of spaces to insert after the star on subsequent comment lines. +cmt_sp_after_star_cont = 0 # unsigned number + +# For multi-line comments with a '*' lead, remove leading spaces if the first +# and last lines of the comment are the same length. +# +# Default: true +cmt_multi_check_last = true # true/false + +# For multi-line comments with a '*' lead, remove leading spaces if the first +# and last lines of the comment are the same length AND if the length is +# bigger as the first_len minimum. +# +# Default: 4 +cmt_multi_first_len_minimum = 4 # unsigned number + +# Path to a file that contains text to insert at the beginning of a file if +# the file doesn't start with a C/C++ comment. If the inserted text contains +# '$(filename)', that will be replaced with the current file's name. +cmt_insert_file_header = "" # string + +# Path to a file that contains text to insert at the end of a file if the +# file doesn't end with a C/C++ comment. If the inserted text contains +# '$(filename)', that will be replaced with the current file's name. +cmt_insert_file_footer = "" # string + +# Path to a file that contains text to insert before a function definition if +# the function isn't preceded by a C/C++ comment. If the inserted text +# contains '$(function)', '$(javaparam)' or '$(fclass)', these will be +# replaced with, respectively, the name of the function, the javadoc '@param' +# and '@return' stuff, or the name of the class to which the member function +# belongs. +cmt_insert_func_header = "" # string + +# Path to a file that contains text to insert before a class if the class +# isn't preceded by a C/C++ comment. If the inserted text contains '$(class)', +# that will be replaced with the class name. +cmt_insert_class_header = "" # string + +# Path to a file that contains text to insert before an Objective-C message +# specification, if the method isn't preceded by a C/C++ comment. If the +# inserted text contains '$(message)' or '$(javaparam)', these will be +# replaced with, respectively, the name of the function, or the javadoc +# '@param' and '@return' stuff. +cmt_insert_oc_msg_header = "" # string + +# Whether a comment should be inserted if a preprocessor is encountered when +# stepping backwards from a function name. +# +# Applies to cmt_insert_oc_msg_header, cmt_insert_func_header and +# cmt_insert_class_header. +cmt_insert_before_preproc = false # true/false + +# Whether a comment should be inserted if a function is declared inline to a +# class definition. +# +# Applies to cmt_insert_func_header. +# +# Default: true +cmt_insert_before_inlines = true # true/false + +# Whether a comment should be inserted if the function is a class constructor +# or destructor. +# +# Applies to cmt_insert_func_header. +cmt_insert_before_ctor_dtor = false # true/false + +# +# Code modifying options (non-whitespace) +# + +# Add or remove braces on a single-line 'do' statement. +mod_full_brace_do = add # ignore/add/remove/force + +# Add or remove braces on a single-line 'for' statement. +mod_full_brace_for = add # ignore/add/remove/force + +# (Pawn) Add or remove braces on a single-line function definition. +mod_full_brace_function = force # ignore/add/remove/force + +# Add or remove braces on a single-line 'if' statement. Braces will not be +# removed if the braced statement contains an 'else'. +mod_full_brace_if = add # ignore/add/remove/force + +# Whether to enforce that all blocks of an 'if'/'else if'/'else' chain either +# have, or do not have, braces. If true, braces will be added if any block +# needs braces, and will only be removed if they can be removed from all +# blocks. +# +# Overrides mod_full_brace_if. +mod_full_brace_if_chain = false # true/false + +# Whether to add braces to all blocks of an 'if'/'else if'/'else' chain. +# If true, mod_full_brace_if_chain will only remove braces from an 'if' that +# does not have an 'else if' or 'else'. +mod_full_brace_if_chain_only = true # true/false + +# Add or remove braces on single-line 'while' statement. +mod_full_brace_while = ignore # ignore/add/remove/force + +# Add or remove braces on single-line 'using ()' statement. +mod_full_brace_using = ignore # ignore/add/remove/force + +# Don't remove braces around statements that span N newlines +mod_full_brace_nl = 0 # unsigned number + +# Whether to prevent removal of braces from 'if'/'for'/'while'/etc. blocks +# which span multiple lines. +# +# Affects: +# mod_full_brace_for +# mod_full_brace_if +# mod_full_brace_if_chain +# mod_full_brace_if_chain_only +# mod_full_brace_while +# mod_full_brace_using +# +# Does not affect: +# mod_full_brace_do +# mod_full_brace_function +mod_full_brace_nl_block_rem_mlcond = false # true/false + +# Add or remove unnecessary parenthesis on 'return' statement. +mod_paren_on_return = remove # ignore/add/remove/force + +# (Pawn) Whether to change optional semicolons to real semicolons. +mod_pawn_semicolon = false # true/false + +# Whether to fully parenthesize Boolean expressions in 'while' and 'if' +# statement, as in 'if (a && b > c)' → 'if (a && (b > c))'. +mod_full_paren_if_bool = true # true/false + +# Whether to remove superfluous semicolons. +mod_remove_extra_semicolon = true # true/false + +# If a function body exceeds the specified number of newlines and doesn't have +# a comment after the close brace, a comment will be added. +mod_add_long_function_closebrace_comment = 0 # unsigned number + +# If a namespace body exceeds the specified number of newlines and doesn't +# have a comment after the close brace, a comment will be added. +mod_add_long_namespace_closebrace_comment = 0 # unsigned number + +# If a class body exceeds the specified number of newlines and doesn't have a +# comment after the close brace, a comment will be added. +mod_add_long_class_closebrace_comment = 0 # unsigned number + +# If a switch body exceeds the specified number of newlines and doesn't have a +# comment after the close brace, a comment will be added. +mod_add_long_switch_closebrace_comment = 0 # unsigned number + +# If an #ifdef body exceeds the specified number of newlines and doesn't have +# a comment after the #endif, a comment will be added. +mod_add_long_ifdef_endif_comment = 0 # unsigned number + +# If an #ifdef or #else body exceeds the specified number of newlines and +# doesn't have a comment after the #else, a comment will be added. +mod_add_long_ifdef_else_comment = 0 # unsigned number + +# Whether to sort consecutive single-line 'import' statements. +mod_sort_import = false # true/false + +# (C#) Whether to sort consecutive single-line 'using' statements. +mod_sort_using = false # true/false + +# Whether to sort consecutive single-line '#include' statements (C/C++) and +# '#import' statements (Objective-C). Be aware that this has the potential to +# break your code if your includes/imports have ordering dependencies. +mod_sort_include = false # true/false + +# Whether to move a 'break' that appears after a fully braced 'case' before +# the close brace, as in 'case X: { ... } break;' → 'case X: { ... break; }'. +mod_move_case_break = false # true/false + +# Add or remove braces around a fully braced case statement. Will only remove +# braces if there are no variable declarations in the block. +mod_case_brace = ignore # ignore/add/remove/force + +# Whether to remove a void 'return;' that appears as the last statement in a +# function. +mod_remove_empty_return = false # true/false + +# Add or remove the comma after the last value of an enumeration. +mod_enum_last_comma = ignore # ignore/add/remove/force + +# (OC) Whether to organize the properties. If true, properties will be +# rearranged according to the mod_sort_oc_property_*_weight factors. +mod_sort_oc_properties = false # true/false + +# (OC) Weight of a class property modifier. +mod_sort_oc_property_class_weight = 0 # number + +# (OC) Weight of 'atomic' and 'nonatomic'. +mod_sort_oc_property_thread_safe_weight = 0 # number + +# (OC) Weight of 'readwrite' when organizing properties. +mod_sort_oc_property_readwrite_weight = 0 # number + +# (OC) Weight of a reference type specifier ('retain', 'copy', 'assign', +# 'weak', 'strong') when organizing properties. +mod_sort_oc_property_reference_weight = 0 # number + +# (OC) Weight of getter type ('getter=') when organizing properties. +mod_sort_oc_property_getter_weight = 0 # number + +# (OC) Weight of setter type ('setter=') when organizing properties. +mod_sort_oc_property_setter_weight = 0 # number + +# (OC) Weight of nullability type ('nullable', 'nonnull', 'null_unspecified', +# 'null_resettable') when organizing properties. +mod_sort_oc_property_nullability_weight = 0 # number + +# +# Preprocessor options +# + +# Add or remove indentation of preprocessor directives inside #if blocks +# at brace level 0 (file-level). +pp_indent = remove # ignore/add/remove/force + +# Whether to indent #if/#else/#endif at the brace level. If false, these are +# indented from column 1. +pp_indent_at_level = false # true/false + +# Specifies the number of columns to indent preprocessors per level +# at brace level 0 (file-level). If pp_indent_at_level=false, also specifies +# the number of columns to indent preprocessors per level +# at brace level > 0 (function-level). +# +# Default: 1 +pp_indent_count = 1 # unsigned number + +# Add or remove space after # based on pp_level of #if blocks. +pp_space = remove # ignore/add/remove/force + +# Sets the number of spaces per level added with pp_space. +pp_space_count = 3 # unsigned number + +# The indent for '#region' and '#endregion' in C# and '#pragma region' in +# C/C++. Negative values decrease indent down to the first column. +pp_indent_region = 0 # number + +# Whether to indent the code between #region and #endregion. +pp_region_indent_code = false # true/false + +# If pp_indent_at_level=true, sets the indent for #if, #else and #endif when +# not at file-level. Negative values decrease indent down to the first column. +# +# =0: Indent preprocessors using output_tab_size +# >0: Column at which all preprocessors will be indented +pp_indent_if = 4 # number + +# Whether to indent the code between #if, #else and #endif. +pp_if_indent_code = false # true/false + +# Whether to indent '#define' at the brace level. If false, these are +# indented from column 1. +pp_define_at_level = false # true/false + +# Whether to ignore the '#define' body while formatting. +pp_ignore_define_body = false # true/false + +# Whether to indent case statements between #if, #else, and #endif. +# Only applies to the indent of the preprocesser that the case statements +# directly inside of. +# +# Default: true +pp_indent_case = true # true/false + +# Whether to indent whole function definitions between #if, #else, and #endif. +# Only applies to the indent of the preprocesser that the function definition +# is directly inside of. +# +# Default: true +pp_indent_func_def = true # true/false + +# Whether to indent extern C blocks between #if, #else, and #endif. +# Only applies to the indent of the preprocesser that the extern block is +# directly inside of. +# +# Default: true +pp_indent_extern = true # true/false + +# Whether to indent braces directly inside #if, #else, and #endif. +# Only applies to the indent of the preprocesser that the braces are directly +# inside of. +# +# Default: true +pp_indent_brace = true # true/false + +# +# Sort includes options +# + +# The regex for include category with priority 0. +include_category_0 = "" # string + +# The regex for include category with priority 1. +include_category_1 = "" # string + +# The regex for include category with priority 2. +include_category_2 = "" # string + +# +# Use or Do not Use options +# + +# true: indent_func_call_param will be used (default) +# false: indent_func_call_param will NOT be used +# +# Default: true +use_indent_func_call_param = true # true/false + +# The value of the indentation for a continuation line is calculated +# differently if the statement is: +# - a declaration: your case with QString fileName ... +# - an assignment: your case with pSettings = new QSettings( ... +# +# At the second case the indentation value might be used twice: +# - at the assignment +# - at the function call (if present) +# +# To prevent the double use of the indentation value, use this option with the +# value 'true'. +# +# true: indent_continue will be used only once +# false: indent_continue will be used every time (default) +use_indent_continue_only_once = false # true/false + +# The value might be used twice: +# - at the assignment +# - at the opening brace +# +# To prevent the double use of the indentation value, use this option with the +# value 'true'. +# +# true: indentation will be used only once +# false: indentation will be used every time (default) +indent_cpp_lambda_only_once = false # true/false + +# Whether to apply special formatting for Qt SIGNAL/SLOT macros. Essentially, +# this tries to format these so that they match Qt's normalized form (i.e. the +# result of QMetaObject::normalizedSignature), which can slightly improve the +# performance of the QObject::connect call, rather than how they would +# otherwise be formatted. +# +# See options_for_QT.cpp for details. +# +# Default: true +use_options_overriding_for_qt_macros = true # true/false + +# +# Warn levels - 1: error, 2: warning (default), 3: note +# + +# (C#) Warning is given if doing tab-to-\t replacement and we have found one +# in a C# verbatim string literal. +# +# Default: 2 +warn_level_tabs_found_in_verbatim_string_literals = 2 # unsigned number + +# Meaning of the settings: +# Ignore - do not do any changes +# Add - makes sure there is 1 or more space/brace/newline/etc +# Force - makes sure there is exactly 1 space/brace/newline/etc, +# behaves like Add in some contexts +# Remove - removes space/brace/newline/etc +# +# +# - Token(s) can be treated as specific type(s) with the 'set' option: +# `set tokenType tokenString [tokenString...]` +# +# Example: +# `set BOOL __AND__ __OR__` +# +# tokenTypes are defined in src/token_enum.h, use them without the +# 'CT_' prefix: 'CT_BOOL' → 'BOOL' +# +# +# - Token(s) can be treated as type(s) with the 'type' option. +# `type tokenString [tokenString...]` +# +# Example: +# `type int c_uint_8 Rectangle` +# +# This can also be achieved with `set TYPE int c_uint_8 Rectangle` +# +# +# To embed whitespace in tokenStrings use the '\' escape character, or quote +# the tokenStrings. These quotes are supported: "'` +# +# +# - Support for the auto detection of languages through the file ending can be +# added using the 'file_ext' command. +# `file_ext langType langString [langString..]` +# +# Example: +# `file_ext CPP .ch .cxx .cpp.in` +# +# langTypes are defined in uncrusify_types.h in the lang_flag_e enum, use +# them without the 'LANG_' prefix: 'LANG_CPP' → 'CPP' +# +# +# - Custom macro-based indentation can be set up using 'macro-open', +# 'macro-else' and 'macro-close'. +# `(macro-open | macro-else | macro-close) tokenString` +# +# Example: +# `macro-open BEGIN_TEMPLATE_MESSAGE_MAP` +# `macro-open BEGIN_MESSAGE_MAP` +# `macro-close END_MESSAGE_MAP` +# +# +# option(s) with 'not default' value: 87 +# diff --git a/util/uncrustify.cfg b/util/uncrustify.cfg deleted file mode 100644 index cb6761a..0000000 --- a/util/uncrustify.cfg +++ /dev/null @@ -1,2736 +0,0 @@ -# Uncrustify-0.68_f - -# -# General options -# - -# The type of line endings. -# -# Default: auto -newlines = auto # lf/crlf/cr/auto - -# The original size of tabs in the input. -# -# Default: 8 -input_tab_size = 4 # unsigned number - -# The size of tabs in the output (only used if align_with_tabs=true). -# -# Default: 8 -output_tab_size = 4 # unsigned number - -# The ASCII value of the string escape char, usually 92 (\) or (Pawn) 94 (^). -# -# Default: 92 -string_escape_char = 92 # unsigned number - -# Alternate string escape char (usually only used for Pawn). -# Only works right before the quote char. -string_escape_char2 = 0 # unsigned number - -# Replace tab characters found in string literals with the escape sequence \t -# instead. -string_replace_tab_chars = false # true/false - -# Allow interpreting '>=' and '>>=' as part of a template in code like -# 'void f(list>=val);'. If true, 'assert(x<0 && y>=3)' will be broken. -# Improvements to template detection may make this option obsolete. -tok_split_gte = false # true/false - -# Specify the marker used in comments to disable processing of part of the -# file. -# -# Default: *INDENT-OFF* -disable_processing_cmt = "" # string - -# Specify the marker used in comments to (re)enable processing in a file. -# -# Default: *INDENT-ON* -enable_processing_cmt = "" # string - -# Enable parsing of digraphs. -enable_digraphs = false # true/false - -# Add or remove the UTF-8 BOM (recommend 'remove'). -utf8_bom = ignore # ignore/add/remove/force - -# If the file contains bytes with values between 128 and 255, but is not -# UTF-8, then output as UTF-8. -utf8_byte = false # true/false - -# Force the output encoding to UTF-8. -utf8_force = false # true/false - -# -# Spacing options -# - -# Add or remove space around non-assignment symbolic operators ('+', '/', '%', -# '<<', and so forth). -sp_arith = force # ignore/add/remove/force - -# Add or remove space around arithmetic operators '+' and '-'. -# -# Overrides sp_arith. -sp_arith_additive = ignore # ignore/add/remove/force - -# Add or remove space around assignment operator '=', '+=', etc. -sp_assign = force # ignore/add/remove/force - -# Add or remove space around '=' in C++11 lambda capture specifications. -# -# Overrides sp_assign. -sp_cpp_lambda_assign = ignore # ignore/add/remove/force - -# Add or remove space after the capture specification in C++11 lambda. -sp_cpp_lambda_paren = ignore # ignore/add/remove/force - -# Add or remove space around assignment operator '=' in a prototype. -sp_assign_default = ignore # ignore/add/remove/force - -# Add or remove space before assignment operator '=', '+=', etc. -# -# Overrides sp_assign. -sp_before_assign = ignore # ignore/add/remove/force - -# Add or remove space after assignment operator '=', '+=', etc. -# -# Overrides sp_assign. -sp_after_assign = ignore # ignore/add/remove/force - -# Add or remove space in 'NS_ENUM ('. -sp_enum_paren = ignore # ignore/add/remove/force - -# Add or remove space around assignment '=' in enum. -sp_enum_assign = force # ignore/add/remove/force - -# Add or remove space before assignment '=' in enum. -# -# Overrides sp_enum_assign. -sp_enum_before_assign = ignore # ignore/add/remove/force - -# Add or remove space after assignment '=' in enum. -# -# Overrides sp_enum_assign. -sp_enum_after_assign = ignore # ignore/add/remove/force - -# Add or remove space around assignment ':' in enum. -sp_enum_colon = ignore # ignore/add/remove/force - -# Add or remove space around preprocessor '##' concatenation operator. -# -# Default: add -sp_pp_concat = ignore # ignore/add/remove/force - -# Add or remove space after preprocessor '#' stringify operator. -# Also affects the '#@' charizing operator. -sp_pp_stringify = ignore # ignore/add/remove/force - -# Add or remove space before preprocessor '#' stringify operator -# as in '#define x(y) L#y'. -sp_before_pp_stringify = ignore # ignore/add/remove/force - -# Add or remove space around boolean operators '&&' and '||'. -sp_bool = force # ignore/add/remove/force - -# Add or remove space around compare operator '<', '>', '==', etc. -sp_compare = force # ignore/add/remove/force - -# Add or remove space inside '(' and ')'. -sp_inside_paren = remove # ignore/add/remove/force - -# Add or remove space between nested parentheses, i.e. '((' vs. ') )'. -sp_paren_paren = remove # ignore/add/remove/force - -# Add or remove space between back-to-back parentheses, i.e. ')(' vs. ') ('. -sp_cparen_oparen = ignore # ignore/add/remove/force - -# Whether to balance spaces inside nested parentheses. -sp_balance_nested_parens = false # true/false - -# Add or remove space between ')' and '{'. -sp_paren_brace = force # ignore/add/remove/force - -# Add or remove space between nested braces, i.e. '{{' vs '{ {'. -sp_brace_brace = ignore # ignore/add/remove/force - -# Add or remove space before pointer star '*'. -sp_before_ptr_star = force # ignore/add/remove/force - -# Add or remove space before pointer star '*' that isn't followed by a -# variable name. If set to 'ignore', sp_before_ptr_star is used instead. -sp_before_unnamed_ptr_star = force # ignore/add/remove/force - -# Add or remove space between pointer stars '*'. -sp_between_ptr_star = remove # ignore/add/remove/force - -# Add or remove space after pointer star '*', if followed by a word. -sp_after_ptr_star = remove # ignore/add/remove/force - -# Add or remove space after pointer caret '^', if followed by a word. -sp_after_ptr_block_caret = ignore # ignore/add/remove/force - -# Add or remove space after pointer star '*', if followed by a qualifier. -sp_after_ptr_star_qualifier = ignore # ignore/add/remove/force - -# Add or remove space after a pointer star '*', if followed by a function -# prototype or function definition. -sp_after_ptr_star_func = remove # ignore/add/remove/force - -# Add or remove space after a pointer star '*', if followed by an open -# parenthesis, as in 'void* (*)(). -sp_ptr_star_paren = ignore # ignore/add/remove/force - -# Add or remove space before a pointer star '*', if followed by a function -# prototype or function definition. -sp_before_ptr_star_func = add # ignore/add/remove/force - -# Add or remove space before a reference sign '&'. -sp_before_byref = add # ignore/add/remove/force - -# Add or remove space before a reference sign '&' that isn't followed by a -# variable name. If set to 'ignore', sp_before_byref is used instead. -sp_before_unnamed_byref = add # ignore/add/remove/force - -# Add or remove space after reference sign '&', if followed by a word. -sp_after_byref = remove # ignore/add/remove/force - -# Add or remove space after a reference sign '&', if followed by a function -# prototype or function definition. -sp_after_byref_func = remove # ignore/add/remove/force - -# Add or remove space before a reference sign '&', if followed by a function -# prototype or function definition. -sp_before_byref_func = add # ignore/add/remove/force - -# Add or remove space between type and word. -# -# Default: force -sp_after_type = force # ignore/add/remove/force - -# Add or remove space between 'decltype(...)' and word. -sp_after_decltype = ignore # ignore/add/remove/force - -# (D) Add or remove space before the parenthesis in the D constructs -# 'template Foo(' and 'class Foo('. -sp_before_template_paren = ignore # ignore/add/remove/force - -# Add or remove space between 'template' and '<'. -# If set to ignore, sp_before_angle is used. -sp_template_angle = ignore # ignore/add/remove/force - -# Add or remove space before '<'. -sp_before_angle = ignore # ignore/add/remove/force - -# Add or remove space inside '<' and '>'. -sp_inside_angle = ignore # ignore/add/remove/force - -# Add or remove space between '>' and ':'. -sp_angle_colon = ignore # ignore/add/remove/force - -# Add or remove space after '<>'. -sp_after_angle = ignore # ignore/add/remove/force - -# Add or remove space between '>' and '(' as found in 'new List(foo);'. -sp_angle_paren = ignore # ignore/add/remove/force - -# Add or remove space between '>' and '()' as found in 'new List();'. -sp_angle_paren_empty = ignore # ignore/add/remove/force - -# Add or remove space between '>' and a word as in 'List m;' or -# 'template static ...'. -sp_angle_word = ignore # ignore/add/remove/force - -# Add or remove space between '>' and '>' in '>>' (template stuff). -# -# Default: add -sp_angle_shift = add # ignore/add/remove/force - -# (C++11) Permit removal of the space between '>>' in 'foo >'. Note -# that sp_angle_shift cannot remove the space without this option. -sp_permit_cpp11_shift = false # true/false - -# Add or remove space before '(' of control statements ('if', 'for', 'switch', -# 'while', etc.). -sp_before_sparen = force # ignore/add/remove/force - -# Add or remove space inside '(' and ')' of control statements. -sp_inside_sparen = remove # ignore/add/remove/force - -# Add or remove space after '(' of control statements. -# -# Overrides sp_inside_sparen. -sp_inside_sparen_open = ignore # ignore/add/remove/force - -# Add or remove space before ')' of control statements. -# -# Overrides sp_inside_sparen. -sp_inside_sparen_close = ignore # ignore/add/remove/force - -# Add or remove space after ')' of control statements. -sp_after_sparen = force # ignore/add/remove/force - -# Add or remove space between ')' and '{' of of control statements. -sp_sparen_brace = force # ignore/add/remove/force - -# (D) Add or remove space between 'invariant' and '('. -sp_invariant_paren = ignore # ignore/add/remove/force - -# (D) Add or remove space after the ')' in 'invariant (C) c'. -sp_after_invariant_paren = ignore # ignore/add/remove/force - -# Add or remove space before empty statement ';' on 'if', 'for' and 'while'. -sp_special_semi = remove # ignore/add/remove/force - -# Add or remove space before ';'. -# -# Default: remove -sp_before_semi = remove # ignore/add/remove/force - -# Add or remove space before ';' in non-empty 'for' statements. -sp_before_semi_for = remove # ignore/add/remove/force - -# Add or remove space before a semicolon of an empty part of a for statement. -sp_before_semi_for_empty = ignore # ignore/add/remove/force - -# Add or remove space after ';', except when followed by a comment. -# -# Default: add -sp_after_semi = add # ignore/add/remove/force - -# Add or remove space after ';' in non-empty 'for' statements. -# -# Default: force -sp_after_semi_for = force # ignore/add/remove/force - -# Add or remove space after the final semicolon of an empty part of a for -# statement, as in 'for ( ; ; )'. -sp_after_semi_for_empty = ignore # ignore/add/remove/force - -# Add or remove space before '[' (except '[]'). -sp_before_square = ignore # ignore/add/remove/force - -# Add or remove space before '[]'. -sp_before_squares = remove # ignore/add/remove/force - -# Add or remove space before C++17 structured bindings. -sp_cpp_before_struct_binding = ignore # ignore/add/remove/force - -# Add or remove space inside a non-empty '[' and ']'. -sp_inside_square = remove # ignore/add/remove/force - -# (OC) Add or remove space inside a non-empty Objective-C boxed array '@[' and -# ']'. If set to ignore, sp_inside_square is used. -sp_inside_square_oc_array = ignore # ignore/add/remove/force - -# Add or remove space after ',', i.e. 'a,b' vs. 'a, b'. -sp_after_comma = force # ignore/add/remove/force - -# Add or remove space before ','. -# -# Default: remove -sp_before_comma = remove # ignore/add/remove/force - -# (C#) Add or remove space between ',' and ']' in multidimensional array type -# like 'int[,,]'. -sp_after_mdatype_commas = ignore # ignore/add/remove/force - -# (C#) Add or remove space between '[' and ',' in multidimensional array type -# like 'int[,,]'. -sp_before_mdatype_commas = ignore # ignore/add/remove/force - -# (C#) Add or remove space between ',' in multidimensional array type -# like 'int[,,]'. -sp_between_mdatype_commas = ignore # ignore/add/remove/force - -# Add or remove space between an open parenthesis and comma, -# i.e. '(,' vs. '( ,'. -# -# Default: force -sp_paren_comma = force # ignore/add/remove/force - -# Add or remove space before the variadic '...' when preceded by a -# non-punctuator. -sp_before_ellipsis = ignore # ignore/add/remove/force - -# Add or remove space between a type and '...'. -sp_type_ellipsis = ignore # ignore/add/remove/force - -# Add or remove space between ')' and '...'. -sp_paren_ellipsis = ignore # ignore/add/remove/force - -# Add or remove space after class ':'. -sp_after_class_colon = ignore # ignore/add/remove/force - -# Add or remove space before class ':'. -sp_before_class_colon = ignore # ignore/add/remove/force - -# Add or remove space after class constructor ':'. -sp_after_constr_colon = ignore # ignore/add/remove/force - -# Add or remove space before class constructor ':'. -sp_before_constr_colon = ignore # ignore/add/remove/force - -# Add or remove space before case ':'. -# -# Default: remove -sp_before_case_colon = remove # ignore/add/remove/force - -# Add or remove space between 'operator' and operator sign. -sp_after_operator = ignore # ignore/add/remove/force - -# Add or remove space between the operator symbol and the open parenthesis, as -# in 'operator ++('. -sp_after_operator_sym = ignore # ignore/add/remove/force - -# Overrides sp_after_operator_sym when the operator has no arguments, as in -# 'operator *()'. -sp_after_operator_sym_empty = ignore # ignore/add/remove/force - -# Add or remove space after C/D cast, i.e. 'cast(int)a' vs. 'cast(int) a' or -# '(int)a' vs. '(int) a'. -sp_after_cast = remove # ignore/add/remove/force - -# Add or remove spaces inside cast parentheses. -sp_inside_paren_cast = remove # ignore/add/remove/force - -# Add or remove space between the type and open parenthesis in a C++ cast, -# i.e. 'int(exp)' vs. 'int (exp)'. -sp_cpp_cast_paren = ignore # ignore/add/remove/force - -# Add or remove space between 'sizeof' and '('. -sp_sizeof_paren = ignore # ignore/add/remove/force - -# Add or remove space between 'sizeof' and '...'. -sp_sizeof_ellipsis = ignore # ignore/add/remove/force - -# Add or remove space between 'sizeof...' and '('. -sp_sizeof_ellipsis_paren = ignore # ignore/add/remove/force - -# Add or remove space between 'decltype' and '('. -sp_decltype_paren = ignore # ignore/add/remove/force - -# (Pawn) Add or remove space after the tag keyword. -sp_after_tag = ignore # ignore/add/remove/force - -# Add or remove space inside enum '{' and '}'. -sp_inside_braces_enum = ignore # ignore/add/remove/force - -# Add or remove space inside struct/union '{' and '}'. -sp_inside_braces_struct = ignore # ignore/add/remove/force - -# (OC) Add or remove space inside Objective-C boxed dictionary '{' and '}' -sp_inside_braces_oc_dict = ignore # ignore/add/remove/force - -# Add or remove space after open brace in an unnamed temporary -# direct-list-initialization. -sp_after_type_brace_init_lst_open = ignore # ignore/add/remove/force - -# Add or remove space before close brace in an unnamed temporary -# direct-list-initialization. -sp_before_type_brace_init_lst_close = ignore # ignore/add/remove/force - -# Add or remove space inside an unnamed temporary direct-list-initialization. -sp_inside_type_brace_init_lst = ignore # ignore/add/remove/force - -# Add or remove space inside '{' and '}'. -sp_inside_braces = force # ignore/add/remove/force - -# Add or remove space inside '{}'. -sp_inside_braces_empty = remove # ignore/add/remove/force - -# Add or remove space between return type and function name. A minimum of 1 -# is forced except for pointer return types. -sp_type_func = ignore # ignore/add/remove/force - -# Add or remove space between type and open brace of an unnamed temporary -# direct-list-initialization. -sp_type_brace_init_lst = ignore # ignore/add/remove/force - -# Add or remove space between function name and '(' on function declaration. -sp_func_proto_paren = ignore # ignore/add/remove/force - -# Add or remove space between function name and '()' on function declaration -# without parameters. -sp_func_proto_paren_empty = ignore # ignore/add/remove/force - -# Add or remove space between function name and '(' on function definition. -sp_func_def_paren = ignore # ignore/add/remove/force - -# Add or remove space between function name and '()' on function definition -# without parameters. -sp_func_def_paren_empty = ignore # ignore/add/remove/force - -# Add or remove space inside empty function '()'. -sp_inside_fparens = remove # ignore/add/remove/force - -# Add or remove space inside function '(' and ')'. -sp_inside_fparen = remove # ignore/add/remove/force - -# Add or remove space inside the first parentheses in a function type, as in -# 'void (*x)(...)'. -sp_inside_tparen = ignore # ignore/add/remove/force - -# Add or remove space between the ')' and '(' in a function type, as in -# 'void (*x)(...)'. -sp_after_tparen_close = ignore # ignore/add/remove/force - -# Add or remove space between ']' and '(' when part of a function call. -sp_square_fparen = ignore # ignore/add/remove/force - -# Add or remove space between ')' and '{' of function. -sp_fparen_brace = force # ignore/add/remove/force - -# Add or remove space between ')' and '{' of s function call in object -# initialization. -# -# Overrides sp_fparen_brace. -sp_fparen_brace_initializer = ignore # ignore/add/remove/force - -# (Java) Add or remove space between ')' and '{{' of double brace initializer. -sp_fparen_dbrace = ignore # ignore/add/remove/force - -# Add or remove space between function name and '(' on function calls. -sp_func_call_paren = ignore # ignore/add/remove/force - -# Add or remove space between function name and '()' on function calls without -# parameters. If set to 'ignore' (the default), sp_func_call_paren is used. -sp_func_call_paren_empty = ignore # ignore/add/remove/force - -# Add or remove space between the user function name and '(' on function -# calls. You need to set a keyword to be a user function in the config file, -# like: -# set func_call_user tr _ i18n -sp_func_call_user_paren = ignore # ignore/add/remove/force - -# Add or remove space inside user function '(' and ')'. -sp_func_call_user_inside_fparen = ignore # ignore/add/remove/force - -# Add or remove space between nested parentheses with user functions, -# i.e. '((' vs. '( ('. -sp_func_call_user_paren_paren = ignore # ignore/add/remove/force - -# Add or remove space between a constructor/destructor and the open -# parenthesis. -sp_func_class_paren = ignore # ignore/add/remove/force - -# Add or remove space between a constructor without parameters or destructor -# and '()'. -sp_func_class_paren_empty = ignore # ignore/add/remove/force - -# Add or remove space between 'return' and '('. -sp_return_paren = ignore # ignore/add/remove/force - -# Add or remove space between 'return' and '{'. -sp_return_brace = ignore # ignore/add/remove/force - -# Add or remove space between '__attribute__' and '('. -sp_attribute_paren = ignore # ignore/add/remove/force - -# Add or remove space between 'defined' and '(' in '#if defined (FOO)'. -sp_defined_paren = ignore # ignore/add/remove/force - -# Add or remove space between 'throw' and '(' in 'throw (something)'. -sp_throw_paren = ignore # ignore/add/remove/force - -# Add or remove space between 'throw' and anything other than '(' as in -# '@throw [...];'. -sp_after_throw = ignore # ignore/add/remove/force - -# Add or remove space between 'catch' and '(' in 'catch (something) { }'. -# If set to ignore, sp_before_sparen is used. -sp_catch_paren = ignore # ignore/add/remove/force - -# (OC) Add or remove space between '@catch' and '(' -# in '@catch (something) { }'. If set to ignore, sp_catch_paren is used. -sp_oc_catch_paren = ignore # ignore/add/remove/force - -# (D) Add or remove space between 'version' and '(' -# in 'version (something) { }'. If set to ignore, sp_before_sparen is used. -sp_version_paren = ignore # ignore/add/remove/force - -# (D) Add or remove space between 'scope' and '(' -# in 'scope (something) { }'. If set to ignore, sp_before_sparen is used. -sp_scope_paren = ignore # ignore/add/remove/force - -# Add or remove space between 'super' and '(' in 'super (something)'. -# -# Default: remove -sp_super_paren = remove # ignore/add/remove/force - -# Add or remove space between 'this' and '(' in 'this (something)'. -# -# Default: remove -sp_this_paren = remove # ignore/add/remove/force - -# Add or remove space between a macro name and its definition. -sp_macro = ignore # ignore/add/remove/force - -# Add or remove space between a macro function ')' and its definition. -sp_macro_func = ignore # ignore/add/remove/force - -# Add or remove space between 'else' and '{' if on the same line. -sp_else_brace = force # ignore/add/remove/force - -# Add or remove space between '}' and 'else' if on the same line. -sp_brace_else = force # ignore/add/remove/force - -# Add or remove space between '}' and the name of a typedef on the same line. -sp_brace_typedef = force # ignore/add/remove/force - -# Add or remove space before the '{' of a 'catch' statement, if the '{' and -# 'catch' are on the same line, as in 'catch (decl) {'. -sp_catch_brace = force # ignore/add/remove/force - -# (OC) Add or remove space before the '{' of a '@catch' statement, if the '{' -# and '@catch' are on the same line, as in '@catch (decl) {'. -# If set to ignore, sp_catch_brace is used. -sp_oc_catch_brace = ignore # ignore/add/remove/force - -# Add or remove space between '}' and 'catch' if on the same line. -sp_brace_catch = force # ignore/add/remove/force - -# (OC) Add or remove space between '}' and '@catch' if on the same line. -# If set to ignore, sp_brace_catch is used. -sp_oc_brace_catch = ignore # ignore/add/remove/force - -# Add or remove space between 'finally' and '{' if on the same line. -sp_finally_brace = ignore # ignore/add/remove/force - -# Add or remove space between '}' and 'finally' if on the same line. -sp_brace_finally = ignore # ignore/add/remove/force - -# Add or remove space between 'try' and '{' if on the same line. -sp_try_brace = ignore # ignore/add/remove/force - -# Add or remove space between get/set and '{' if on the same line. -sp_getset_brace = ignore # ignore/add/remove/force - -# Add or remove space between a variable and '{' for C++ uniform -# initialization. -# -# Default: add -sp_word_brace = add # ignore/add/remove/force - -# Add or remove space between a variable and '{' for a namespace. -# -# Default: add -sp_word_brace_ns = add # ignore/add/remove/force - -# Add or remove space before the '::' operator. -sp_before_dc = ignore # ignore/add/remove/force - -# Add or remove space after the '::' operator. -sp_after_dc = ignore # ignore/add/remove/force - -# (D) Add or remove around the D named array initializer ':' operator. -sp_d_array_colon = ignore # ignore/add/remove/force - -# Add or remove space after the '!' (not) unary operator. -# -# Default: remove -sp_not = remove # ignore/add/remove/force - -# Add or remove space after the '~' (invert) unary operator. -# -# Default: remove -sp_inv = remove # ignore/add/remove/force - -# Add or remove space after the '&' (address-of) unary operator. This does not -# affect the spacing after a '&' that is part of a type. -# -# Default: remove -sp_addr = remove # ignore/add/remove/force - -# Add or remove space around the '.' or '->' operators. -# -# Default: remove -sp_member = remove # ignore/add/remove/force - -# Add or remove space after the '*' (dereference) unary operator. This does -# not affect the spacing after a '*' that is part of a type. -# -# Default: remove -sp_deref = remove # ignore/add/remove/force - -# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. -# -# Default: remove -sp_sign = remove # ignore/add/remove/force - -# Add or remove space between '++' and '--' the word to which it is being -# applied, as in '(--x)' or 'y++;'. -# -# Default: remove -sp_incdec = remove # ignore/add/remove/force - -# Add or remove space before a backslash-newline at the end of a line. -# -# Default: add -sp_before_nl_cont = add # ignore/add/remove/force - -# (OC) Add or remove space after the scope '+' or '-', as in '-(void) foo;' -# or '+(int) bar;'. -sp_after_oc_scope = ignore # ignore/add/remove/force - -# (OC) Add or remove space after the colon in message specs, -# i.e. '-(int) f:(int) x;' vs. '-(int) f: (int) x;'. -sp_after_oc_colon = ignore # ignore/add/remove/force - -# (OC) Add or remove space before the colon in message specs, -# i.e. '-(int) f: (int) x;' vs. '-(int) f : (int) x;'. -sp_before_oc_colon = ignore # ignore/add/remove/force - -# (OC) Add or remove space after the colon in immutable dictionary expression -# 'NSDictionary *test = @{@"foo" :@"bar"};'. -sp_after_oc_dict_colon = ignore # ignore/add/remove/force - -# (OC) Add or remove space before the colon in immutable dictionary expression -# 'NSDictionary *test = @{@"foo" :@"bar"};'. -sp_before_oc_dict_colon = ignore # ignore/add/remove/force - -# (OC) Add or remove space after the colon in message specs, -# i.e. '[object setValue:1];' vs. '[object setValue: 1];'. -sp_after_send_oc_colon = ignore # ignore/add/remove/force - -# (OC) Add or remove space before the colon in message specs, -# i.e. '[object setValue:1];' vs. '[object setValue :1];'. -sp_before_send_oc_colon = ignore # ignore/add/remove/force - -# (OC) Add or remove space after the (type) in message specs, -# i.e. '-(int)f: (int) x;' vs. '-(int)f: (int)x;'. -sp_after_oc_type = ignore # ignore/add/remove/force - -# (OC) Add or remove space after the first (type) in message specs, -# i.e. '-(int) f:(int)x;' vs. '-(int)f:(int)x;'. -sp_after_oc_return_type = ignore # ignore/add/remove/force - -# (OC) Add or remove space between '@selector' and '(', -# i.e. '@selector(msgName)' vs. '@selector (msgName)'. -# Also applies to '@protocol()' constructs. -sp_after_oc_at_sel = ignore # ignore/add/remove/force - -# (OC) Add or remove space between '@selector(x)' and the following word, -# i.e. '@selector(foo) a:' vs. '@selector(foo)a:'. -sp_after_oc_at_sel_parens = ignore # ignore/add/remove/force - -# (OC) Add or remove space inside '@selector' parentheses, -# i.e. '@selector(foo)' vs. '@selector( foo )'. -# Also applies to '@protocol()' constructs. -sp_inside_oc_at_sel_parens = ignore # ignore/add/remove/force - -# (OC) Add or remove space before a block pointer caret, -# i.e. '^int (int arg){...}' vs. ' ^int (int arg){...}'. -sp_before_oc_block_caret = ignore # ignore/add/remove/force - -# (OC) Add or remove space after a block pointer caret, -# i.e. '^int (int arg){...}' vs. '^ int (int arg){...}'. -sp_after_oc_block_caret = ignore # ignore/add/remove/force - -# (OC) Add or remove space between the receiver and selector in a message, -# as in '[receiver selector ...]'. -sp_after_oc_msg_receiver = ignore # ignore/add/remove/force - -# (OC) Add or remove space after '@property'. -sp_after_oc_property = ignore # ignore/add/remove/force - -# (OC) Add or remove space between '@synchronized' and the open parenthesis, -# i.e. '@synchronized(foo)' vs. '@synchronized (foo)'. -sp_after_oc_synchronized = ignore # ignore/add/remove/force - -# Add or remove space around the ':' in 'b ? t : f'. -sp_cond_colon = ignore # ignore/add/remove/force - -# Add or remove space before the ':' in 'b ? t : f'. -# -# Overrides sp_cond_colon. -sp_cond_colon_before = ignore # ignore/add/remove/force - -# Add or remove space after the ':' in 'b ? t : f'. -# -# Overrides sp_cond_colon. -sp_cond_colon_after = ignore # ignore/add/remove/force - -# Add or remove space around the '?' in 'b ? t : f'. -sp_cond_question = ignore # ignore/add/remove/force - -# Add or remove space before the '?' in 'b ? t : f'. -# -# Overrides sp_cond_question. -sp_cond_question_before = ignore # ignore/add/remove/force - -# Add or remove space after the '?' in 'b ? t : f'. -# -# Overrides sp_cond_question. -sp_cond_question_after = ignore # ignore/add/remove/force - -# In the abbreviated ternary form '(a ?: b)', add or remove space between '?' -# and ':'. -# -# Overrides all other sp_cond_* options. -sp_cond_ternary_short = ignore # ignore/add/remove/force - -# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make -# sense here. -sp_case_label = ignore # ignore/add/remove/force - -# (D) Add or remove space around the D '..' operator. -sp_range = ignore # ignore/add/remove/force - -# Add or remove space after ':' in a Java/C++11 range-based 'for', -# as in 'for (Type var : expr)'. -sp_after_for_colon = ignore # ignore/add/remove/force - -# Add or remove space before ':' in a Java/C++11 range-based 'for', -# as in 'for (Type var : expr)'. -sp_before_for_colon = ignore # ignore/add/remove/force - -# (D) Add or remove space between 'extern' and '(' as in 'extern (C)'. -sp_extern_paren = ignore # ignore/add/remove/force - -# Add or remove space after the opening of a C++ comment, -# i.e. '// A' vs. '//A'. -sp_cmt_cpp_start = ignore # ignore/add/remove/force - -# If true, space is added with sp_cmt_cpp_start will be added after doxygen -# sequences like '///', '///<', '//!' and '//!<'. -sp_cmt_cpp_doxygen = false # true/false - -# If true, space is added with sp_cmt_cpp_start will be added after Qt -# translator or meta-data comments like '//:', '//=', and '//~'. -sp_cmt_cpp_qttr = false # true/false - -# Add or remove space between #else or #endif and a trailing comment. -sp_endif_cmt = ignore # ignore/add/remove/force - -# Add or remove space after 'new', 'delete' and 'delete[]'. -sp_after_new = ignore # ignore/add/remove/force - -# Add or remove space between 'new' and '(' in 'new()'. -sp_between_new_paren = ignore # ignore/add/remove/force - -# Add or remove space between ')' and type in 'new(foo) BAR'. -sp_after_newop_paren = ignore # ignore/add/remove/force - -# Add or remove space inside parenthesis of the new operator -# as in 'new(foo) BAR'. -sp_inside_newop_paren = ignore # ignore/add/remove/force - -# Add or remove space after the open parenthesis of the new operator, -# as in 'new(foo) BAR'. -# -# Overrides sp_inside_newop_paren. -sp_inside_newop_paren_open = ignore # ignore/add/remove/force - -# Add or remove space before the close parenthesis of the new operator, -# as in 'new(foo) BAR'. -# -# Overrides sp_inside_newop_paren. -sp_inside_newop_paren_close = ignore # ignore/add/remove/force - -# Add or remove space before a trailing or embedded comment. -sp_before_tr_emb_cmt = ignore # ignore/add/remove/force - -# Number of spaces before a trailing or embedded comment. -sp_num_before_tr_emb_cmt = 0 # unsigned number - -# (Java) Add or remove space between an annotation and the open parenthesis. -sp_annotation_paren = ignore # ignore/add/remove/force - -# If true, vbrace tokens are dropped to the previous token and skipped. -sp_skip_vbrace_tokens = false # true/false - -# Add or remove space after 'noexcept'. -sp_after_noexcept = ignore # ignore/add/remove/force - -# If true, a is inserted after #define. -force_tab_after_define = false # true/false - -# -# Indenting options -# - -# The number of columns to indent per level. Usually 2, 3, 4, or 8. -# -# Default: 8 -indent_columns = 4 # unsigned number - -# The continuation indent. If non-zero, this overrides the indent of '(' and -# '=' continuation indents. Negative values are OK; negative value is absolute -# and not increased for each '(' level. -# -# For FreeBSD, this is set to 4. -indent_continue = 0 # number - -# The continuation indent, only for class header line(s). If non-zero, this -# overrides the indent of 'class' continuation indents. -indent_continue_class_head = 0 # unsigned number - -# Whether to indent empty lines (i.e. lines which contain only spaces before -# the newline character). -indent_single_newlines = false # true/false - -# The continuation indent for func_*_param if they are true. If non-zero, this -# overrides the indent. -indent_param = 0 # unsigned number - -# How to use tabs when indenting code. -# -# 0: Spaces only -# 1: Indent with tabs to brace level, align with spaces (default) -# 2: Indent and align with tabs, using spaces when not on a tabstop -# -# Default: 1 -indent_with_tabs = 0 # unsigned number - -# Whether to indent comments that are not at a brace level with tabs on a -# tabstop. Requires indent_with_tabs=2. If false, will use spaces. -indent_cmt_with_tabs = false # true/false - -# Whether to indent strings broken by '\' so that they line up. -indent_align_string = false # true/false - -# The number of spaces to indent multi-line XML strings. -# Requires indent_align_string=true. -indent_xml_string = 0 # unsigned number - -# Spaces to indent '{' from level. -indent_brace = 0 # unsigned number - -# Whether braces are indented to the body level. -indent_braces = false # true/false - -# Whether to disable indenting function braces if indent_braces=true. -indent_braces_no_func = false # true/false - -# Whether to disable indenting class braces if indent_braces=true. -indent_braces_no_class = false # true/false - -# Whether to disable indenting struct braces if indent_braces=true. -indent_braces_no_struct = false # true/false - -# Whether to indent based on the size of the brace parent, -# i.e. 'if' → 3 spaces, 'for' → 4 spaces, etc. -indent_brace_parent = false # true/false - -# Whether to indent based on the open parenthesis instead of the open brace -# in '({\n'. -indent_paren_open_brace = false # true/false - -# (C#) Whether to indent the brace of a C# delegate by another level. -indent_cs_delegate_brace = false # true/false - -# (C#) Whether to indent a C# delegate (to handle delegates with no brace) by -# another level. -indent_cs_delegate_body = false # true/false - -# Whether to indent the body of a 'namespace'. -indent_namespace = false # true/false - -# Whether to indent only the first namespace, and not any nested namespaces. -# Requires indent_namespace=true. -indent_namespace_single_indent = false # true/false - -# The number of spaces to indent a namespace block. -indent_namespace_level = 0 # unsigned number - -# If the body of the namespace is longer than this number, it won't be -# indented. Requires indent_namespace=true. 0 means no limit. -indent_namespace_limit = 0 # unsigned number - -# Whether the 'extern "C"' body is indented. -indent_extern = false # true/false - -# Whether the 'class' body is indented. -indent_class = false # true/false - -# Whether to indent the stuff after a leading base class colon. -indent_class_colon = false # true/false - -# Whether to indent based on a class colon instead of the stuff after the -# colon. Requires indent_class_colon=true. -indent_class_on_colon = false # true/false - -# Whether to indent the stuff after a leading class initializer colon. -indent_constr_colon = false # true/false - -# Virtual indent from the ':' for member initializers. -# -# Default: 2 -indent_ctor_init_leading = 2 # unsigned number - -# Additional indent for constructor initializer list. -# Negative values decrease indent down to the first column. -indent_ctor_init = 0 # number - -# Whether to indent 'if' following 'else' as a new block under the 'else'. -# If false, 'else\nif' is treated as 'else if' for indenting purposes. -indent_else_if = false # true/false - -# Amount to indent variable declarations after a open brace. -# -# <0: Relative -# ≥0: Absolute -indent_var_def_blk = 0 # number - -# Whether to indent continued variable declarations instead of aligning. -indent_var_def_cont = false # true/false - -# Whether to indent continued shift expressions ('<<' and '>>') instead of -# aligning. Set align_left_shift=false when enabling this. -indent_shift = false # true/false - -# Whether to force indentation of function definitions to start in column 1. -indent_func_def_force_col1 = false # true/false - -# Whether to indent continued function call parameters one indent level, -# rather than aligning parameters under the open parenthesis. -indent_func_call_param = false # true/false - -# Same as indent_func_call_param, but for function definitions. -indent_func_def_param = false # true/false - -# Same as indent_func_call_param, but for function prototypes. -indent_func_proto_param = false # true/false - -# Same as indent_func_call_param, but for class declarations. -indent_func_class_param = false # true/false - -# Same as indent_func_call_param, but for class variable constructors. -indent_func_ctor_var_param = false # true/false - -# Same as indent_func_call_param, but for template parameter lists. -indent_template_param = false # true/false - -# Double the indent for indent_func_xxx_param options. -# Use both values of the options indent_columns and indent_param. -indent_func_param_double = false # true/false - -# Indentation column for standalone 'const' qualifier on a function -# prototype. -indent_func_const = 0 # unsigned number - -# Indentation column for standalone 'throw' qualifier on a function -# prototype. -indent_func_throw = 0 # unsigned number - -# The number of spaces to indent a continued '->' or '.'. -# Usually set to 0, 1, or indent_columns. -indent_member = 0 # unsigned number - -# Whether lines broken at '.' or '->' should be indented by a single indent. -# The indent_member option will not be effective if this is set to true. -indent_member_single = false # true/false - -# Spaces to indent single line ('//') comments on lines before code. -indent_sing_line_comments = 0 # unsigned number - -# Whether to indent trailing single line ('//') comments relative to the code -# instead of trying to keep the same absolute column. -indent_relative_single_line_comments = false # true/false - -# Spaces to indent 'case' from 'switch'. Usually 0 or indent_columns. -indent_switch_case = 0 # unsigned number - -# Whether to indent preprocessor statements inside of switch statements. -# -# Default: true -indent_switch_pp = true # true/false - -# Spaces to shift the 'case' line, without affecting any other lines. -# Usually 0. -indent_case_shift = 0 # unsigned number - -# Spaces to indent '{' from 'case'. By default, the brace will appear under -# the 'c' in case. Usually set to 0 or indent_columns. Negative values are OK. -indent_case_brace = 0 # number - -# Whether to indent comments found in first column. -indent_col1_comment = false # true/false - -# How to indent goto labels. -# -# >0: Absolute column where 1 is the leftmost column -# ≤0: Subtract from brace indent -# -# Default: 1 -indent_label = 1 # number - -# Same as indent_label, but for access specifiers that are followed by a -# colon. -# -# Default: 1 -indent_access_spec = 1 # number - -# Whether to indent the code after an access specifier by one level. -# If true, this option forces 'indent_access_spec=0'. -indent_access_spec_body = false # true/false - -# If an open parenthesis is followed by a newline, whether to indent the next -# line so that it lines up after the open parenthesis (not recommended). -indent_paren_nl = false # true/false - -# How to indent a close parenthesis after a newline. -# -# 0: Indent to body level (default) -# 1: Align under the open parenthesis -# 2: Indent to the brace level -indent_paren_close = 0 # unsigned number - -# Whether to indent the open parenthesis of a function definition, -# if the parenthesis is on its own line. -indent_paren_after_func_def = false # true/false - -# Whether to indent the open parenthesis of a function declaration, -# if the parenthesis is on its own line. -indent_paren_after_func_decl = false # true/false - -# Whether to indent the open parenthesis of a function call, -# if the parenthesis is on its own line. -indent_paren_after_func_call = false # true/false - -# Whether to indent a comma when inside a parenthesis. -# If true, aligns under the open parenthesis. -indent_comma_paren = false # true/false - -# Whether to indent a Boolean operator when inside a parenthesis. -# If true, aligns under the open parenthesis. -indent_bool_paren = false # true/false - -# Whether to indent a semicolon when inside a for parenthesis. -# If true, aligns under the open for parenthesis. -indent_semicolon_for_paren = false # true/false - -# Whether to align the first expression to following ones -# if indent_bool_paren=true. -indent_first_bool_expr = false # true/false - -# Whether to align the first expression to following ones -# if indent_semicolon_for_paren=true. -indent_first_for_expr = false # true/false - -# If an open square is followed by a newline, whether to indent the next line -# so that it lines up after the open square (not recommended). -indent_square_nl = false # true/false - -# (ESQL/C) Whether to preserve the relative indent of 'EXEC SQL' bodies. -indent_preserve_sql = false # true/false - -# Whether to align continued statements at the '='. If false or if the '=' is -# followed by a newline, the next line is indent one tab. -# -# Default: true -indent_align_assign = false # true/false - -# Whether to align continued statements at the '('. If false or the '(' is not -# followed by a newline, the next line indent is one tab. -# -# Default: true -indent_align_paren = true # true/false - -# (OC) Whether to indent Objective-C blocks at brace level instead of usual -# rules. -indent_oc_block = false # true/false - -# (OC) Indent for Objective-C blocks in a message relative to the parameter -# name. -# -# =0: Use indent_oc_block rules -# >0: Use specified number of spaces to indent -indent_oc_block_msg = 0 # unsigned number - -# (OC) Minimum indent for subsequent parameters -indent_oc_msg_colon = 0 # unsigned number - -# (OC) Whether to prioritize aligning with initial colon (and stripping spaces -# from lines, if necessary). -# -# Default: true -indent_oc_msg_prioritize_first_colon = true # true/false - -# (OC) Whether to indent blocks the way that Xcode does by default -# (from the keyword if the parameter is on its own line; otherwise, from the -# previous indentation level). Requires indent_oc_block_msg=true. -indent_oc_block_msg_xcode_style = false # true/false - -# (OC) Whether to indent blocks from where the brace is, relative to a -# message keyword. Requires indent_oc_block_msg=true. -indent_oc_block_msg_from_keyword = false # true/false - -# (OC) Whether to indent blocks from where the brace is, relative to a message -# colon. Requires indent_oc_block_msg=true. -indent_oc_block_msg_from_colon = false # true/false - -# (OC) Whether to indent blocks from where the block caret is. -# Requires indent_oc_block_msg=true. -indent_oc_block_msg_from_caret = false # true/false - -# (OC) Whether to indent blocks from where the brace caret is. -# Requires indent_oc_block_msg=true. -indent_oc_block_msg_from_brace = false # true/false - -# When indenting after virtual brace open and newline add further spaces to -# reach this minimum indent. -indent_min_vbrace_open = 0 # unsigned number - -# Whether to add further spaces after regular indent to reach next tabstop -# when identing after virtual brace open and newline. -indent_vbrace_open_on_tabstop = false # true/false - -# How to indent after a brace followed by another token (not a newline). -# true: indent all contained lines to match the token -# false: indent all contained lines to match the brace -# -# Default: true -indent_token_after_brace = true # true/false - -# Whether to indent the body of a C++11 lambda. -indent_cpp_lambda_body = false # true/false - -# (C#) Whether to indent a 'using' block if no braces are used. -# -# Default: true -indent_using_block = true # true/false - -# How to indent the continuation of ternary operator. -# -# 0: Off (default) -# 1: When the `if_false` is a continuation, indent it under `if_false` -# 2: When the `:` is a continuation, indent it under `?` -indent_ternary_operator = 0 # unsigned number - -# If true, the indentation of the chunks after a `return new` sequence will be set at return indentation column. -indent_off_after_return_new = false # true/false - -# If true, the tokens after return are indented with regular single indentation. By default (false) the indentation is after the return token. -indent_single_after_return = false # true/false - -# Whether to ignore indent and alignment for 'asm' blocks (i.e. assume they -# have their own indentation). -indent_ignore_asm_block = false # true/false - -# -# Newline adding and removing options -# - -# Whether to collapse empty blocks between '{' and '}'. -nl_collapse_empty_body = true # true/false - -# Don't split one-line braced assignments, as in 'foo_t f = { 1, 2 };'. -nl_assign_leave_one_liners = false # true/false - -# Don't split one-line braced statements inside a 'class xx { }' body. -nl_class_leave_one_liners = false # true/false - -# Don't split one-line enums, as in 'enum foo { BAR = 15 };' -nl_enum_leave_one_liners = false # true/false - -# Don't split one-line get or set functions. -nl_getset_leave_one_liners = false # true/false - -# (C#) Don't split one-line property get or set functions. -nl_cs_property_leave_one_liners = false # true/false - -# Don't split one-line function definitions, as in 'int foo() { return 0; }'. -nl_func_leave_one_liners = false # true/false - -# Don't split one-line C++11 lambdas, as in '[]() { return 0; }'. -nl_cpp_lambda_leave_one_liners = false # true/false - -# Don't split one-line if/else statements, as in 'if(...) b++;'. -nl_if_leave_one_liners = false # true/false - -# Don't split one-line while statements, as in 'while(...) b++;'. -nl_while_leave_one_liners = false # true/false - -# Don't split one-line for statements, as in 'for(...) b++;'. -nl_for_leave_one_liners = false # true/false - -# (OC) Don't split one-line Objective-C messages. -nl_oc_msg_leave_one_liner = false # true/false - -# (OC) Add or remove newline between method declaration and '{'. -nl_oc_mdef_brace = ignore # ignore/add/remove/force - -# (OC) Add or remove newline between Objective-C block signature and '{'. -nl_oc_block_brace = ignore # ignore/add/remove/force - -# (OC) Add or remove newline between '@interface' and '{'. -nl_oc_interface_brace = ignore # ignore/add/remove/force - -# (OC) Add or remove newline between '@implementation' and '{'. -nl_oc_implementation_brace = ignore # ignore/add/remove/force - -# Add or remove newlines at the start of the file. -nl_start_of_file = ignore # ignore/add/remove/force - -# The minimum number of newlines at the start of the file (only used if -# nl_start_of_file is 'add' or 'force'). -nl_start_of_file_min = 0 # unsigned number - -# Add or remove newline at the end of the file. -nl_end_of_file = ignore # ignore/add/remove/force - -# The minimum number of newlines at the end of the file (only used if -# nl_end_of_file is 'add' or 'force'). -nl_end_of_file_min = 0 # unsigned number - -# Add or remove newline between '=' and '{'. -nl_assign_brace = remove # ignore/add/remove/force - -# (D) Add or remove newline between '=' and '['. -nl_assign_square = ignore # ignore/add/remove/force - -# Add or remove newline between '[]' and '{'. -nl_tsquare_brace = ignore # ignore/add/remove/force - -# (D) Add or remove newline after '= ['. Will also affect the newline before -# the ']'. -nl_after_square_assign = ignore # ignore/add/remove/force - -# The number of blank lines after a block of variable definitions at the top -# of a function body. -# -# 0 = No change (default). -nl_func_var_def_blk = 0 # unsigned number - -# The number of newlines before a block of typedefs. If nl_after_access_spec -# is non-zero, that option takes precedence. -# -# 0 = No change (default). -nl_typedef_blk_start = 0 # unsigned number - -# The number of newlines after a block of typedefs. -# -# 0 = No change (default). -nl_typedef_blk_end = 0 # unsigned number - -# The maximum number of consecutive newlines within a block of typedefs. -# -# 0 = No change (default). -nl_typedef_blk_in = 0 # unsigned number - -# The number of newlines before a block of variable definitions not at the top -# of a function body. If nl_after_access_spec is non-zero, that option takes -# precedence. -# -# 0 = No change (default). -nl_var_def_blk_start = 0 # unsigned number - -# The number of newlines after a block of variable definitions not at the top -# of a function body. -# -# 0 = No change (default). -nl_var_def_blk_end = 0 # unsigned number - -# The maximum number of consecutive newlines within a block of variable -# definitions. -# -# 0 = No change (default). -nl_var_def_blk_in = 0 # unsigned number - -# Add or remove newline between a function call's ')' and '{', as in -# 'list_for_each(item, &list) { }'. -nl_fcall_brace = ignore # ignore/add/remove/force - -# Add or remove newline between 'enum' and '{'. -nl_enum_brace = ignore # ignore/add/remove/force - -# Add or remove newline between 'enum' and 'class'. -nl_enum_class = ignore # ignore/add/remove/force - -# Add or remove newline between 'enum class' and the identifier. -nl_enum_class_identifier = ignore # ignore/add/remove/force - -# Add or remove newline between 'enum class' type and ':'. -nl_enum_identifier_colon = ignore # ignore/add/remove/force - -# Add or remove newline between 'enum class identifier :' and type. -nl_enum_colon_type = ignore # ignore/add/remove/force - -# Add or remove newline between 'struct and '{'. -nl_struct_brace = ignore # ignore/add/remove/force - -# Add or remove newline between 'union' and '{'. -nl_union_brace = ignore # ignore/add/remove/force - -# Add or remove newline between 'if' and '{'. -nl_if_brace = remove # ignore/add/remove/force - -# Add or remove newline between '}' and 'else'. -nl_brace_else = add # ignore/add/remove/force - -# Add or remove newline between 'else if' and '{'. If set to ignore, -# nl_if_brace is used instead. -nl_elseif_brace = add # ignore/add/remove/force - -# Add or remove newline between 'else' and '{'. -nl_else_brace = remove # ignore/add/remove/force - -# Add or remove newline between 'else' and 'if'. -nl_else_if = ignore # ignore/add/remove/force - -# Add or remove newline before 'if'/'else if' closing parenthesis. -nl_before_if_closing_paren = ignore # ignore/add/remove/force - -# Add or remove newline between '}' and 'finally'. -nl_brace_finally = ignore # ignore/add/remove/force - -# Add or remove newline between 'finally' and '{'. -nl_finally_brace = ignore # ignore/add/remove/force - -# Add or remove newline between 'try' and '{'. -nl_try_brace = ignore # ignore/add/remove/force - -# Add or remove newline between get/set and '{'. -nl_getset_brace = ignore # ignore/add/remove/force - -# Add or remove newline between 'for' and '{'. -nl_for_brace = remove # ignore/add/remove/force - -# Add or remove newline before the '{' of a 'catch' statement, as in -# 'catch (decl) {'. -nl_catch_brace = ignore # ignore/add/remove/force - -# (OC) Add or remove newline before the '{' of a '@catch' statement, as in -# '@catch (decl) {'. If set to ignore, nl_catch_brace is used. -nl_oc_catch_brace = ignore # ignore/add/remove/force - -# Add or remove newline between '}' and 'catch'. -nl_brace_catch = ignore # ignore/add/remove/force - -# (OC) Add or remove newline between '}' and '@catch'. If set to ignore, -# nl_brace_catch is used. -nl_oc_brace_catch = ignore # ignore/add/remove/force - -# Add or remove newline between '}' and ']'. -nl_brace_square = ignore # ignore/add/remove/force - -# Add or remove newline between '}' and ')' in a function invocation. -nl_brace_fparen = ignore # ignore/add/remove/force - -# Add or remove newline between 'while' and '{'. -nl_while_brace = remove # ignore/add/remove/force - -# (D) Add or remove newline between 'scope (x)' and '{'. -nl_scope_brace = ignore # ignore/add/remove/force - -# (D) Add or remove newline between 'unittest' and '{'. -nl_unittest_brace = ignore # ignore/add/remove/force - -# (D) Add or remove newline between 'version (x)' and '{'. -nl_version_brace = ignore # ignore/add/remove/force - -# (C#) Add or remove newline between 'using' and '{'. -nl_using_brace = ignore # ignore/add/remove/force - -# Add or remove newline between two open or close braces. Due to general -# newline/brace handling, REMOVE may not work. -nl_brace_brace = ignore # ignore/add/remove/force - -# Add or remove newline between 'do' and '{'. -nl_do_brace = remove # ignore/add/remove/force - -# Add or remove newline between '}' and 'while' of 'do' statement. -nl_brace_while = remove # ignore/add/remove/force - -# Add or remove newline between 'switch' and '{'. -nl_switch_brace = remove # ignore/add/remove/force - -# Add or remove newline between 'synchronized' and '{'. -nl_synchronized_brace = ignore # ignore/add/remove/force - -# Add a newline between ')' and '{' if the ')' is on a different line than the -# if/for/etc. -# -# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch and -# nl_catch_brace. -nl_multi_line_cond = false # true/false - -# Force a newline in a define after the macro name for multi-line defines. -nl_multi_line_define = false # true/false - -# Whether to add a newline before 'case', and a blank line before a 'case' -# statement that follows a ';' or '}'. -nl_before_case = false # true/false - -# Whether to add a newline after a 'case' statement. -nl_after_case = false # true/false - -# Add or remove newline between a case ':' and '{'. -# -# Overrides nl_after_case. -nl_case_colon_brace = ignore # ignore/add/remove/force - -# Add or remove newline between ')' and 'throw'. -nl_before_throw = ignore # ignore/add/remove/force - -# Add or remove newline between 'namespace' and '{'. -nl_namespace_brace = ignore # ignore/add/remove/force - -# Add or remove newline between 'template<>' and whatever follows. -nl_template_class = ignore # ignore/add/remove/force - -# Add or remove newline between 'class' and '{'. -nl_class_brace = ignore # ignore/add/remove/force - -# Add or remove newline before or after (depending on pos_class_comma) each -# ',' in the base class list. -nl_class_init_args = ignore # ignore/add/remove/force - -# Add or remove newline after each ',' in the constructor member -# initialization. Related to nl_constr_colon, pos_constr_colon and -# pos_constr_comma. -nl_constr_init_args = ignore # ignore/add/remove/force - -# Add or remove newline before first element, after comma, and after last -# element, in 'enum'. -nl_enum_own_lines = ignore # ignore/add/remove/force - -# Add or remove newline between return type and function name in a function -# definition. -nl_func_type_name = ignore # ignore/add/remove/force - -# Add or remove newline between return type and function name inside a class -# definition. If set to ignore, nl_func_type_name or nl_func_proto_type_name -# is used instead. -nl_func_type_name_class = ignore # ignore/add/remove/force - -# Add or remove newline between class specification and '::' -# in 'void A::f() { }'. Only appears in separate member implementation (does -# not appear with in-line implementation). -nl_func_class_scope = ignore # ignore/add/remove/force - -# Add or remove newline between function scope and name, as in -# 'void A :: f() { }'. -nl_func_scope_name = ignore # ignore/add/remove/force - -# Add or remove newline between return type and function name in a prototype. -nl_func_proto_type_name = ignore # ignore/add/remove/force - -# Add or remove newline between a function name and the opening '(' in the -# declaration. -nl_func_paren = ignore # ignore/add/remove/force - -# Overrides nl_func_paren for functions with no parameters. -nl_func_paren_empty = ignore # ignore/add/remove/force - -# Add or remove newline between a function name and the opening '(' in the -# definition. -nl_func_def_paren = ignore # ignore/add/remove/force - -# Overrides nl_func_def_paren for functions with no parameters. -nl_func_def_paren_empty = ignore # ignore/add/remove/force - -# Add or remove newline between a function name and the opening '(' in the -# call. -nl_func_call_paren = ignore # ignore/add/remove/force - -# Overrides nl_func_call_paren for functions with no parameters. -nl_func_call_paren_empty = ignore # ignore/add/remove/force - -# Add or remove newline after '(' in a function declaration. -nl_func_decl_start = ignore # ignore/add/remove/force - -# Add or remove newline after '(' in a function definition. -nl_func_def_start = ignore # ignore/add/remove/force - -# Overrides nl_func_decl_start when there is only one parameter. -nl_func_decl_start_single = ignore # ignore/add/remove/force - -# Overrides nl_func_def_start when there is only one parameter. -nl_func_def_start_single = ignore # ignore/add/remove/force - -# Whether to add a newline after '(' in a function declaration if '(' and ')' -# are in different lines. If false, nl_func_decl_start is used instead. -nl_func_decl_start_multi_line = false # true/false - -# Whether to add a newline after '(' in a function definition if '(' and ')' -# are in different lines. If false, nl_func_def_start is used instead. -nl_func_def_start_multi_line = false # true/false - -# Add or remove newline after each ',' in a function declaration. -nl_func_decl_args = ignore # ignore/add/remove/force - -# Add or remove newline after each ',' in a function definition. -nl_func_def_args = ignore # ignore/add/remove/force - -# Whether to add a newline after each ',' in a function declaration if '(' -# and ')' are in different lines. If false, nl_func_decl_args is used instead. -nl_func_decl_args_multi_line = false # true/false - -# Whether to add a newline after each ',' in a function definition if '(' -# and ')' are in different lines. If false, nl_func_def_args is used instead. -nl_func_def_args_multi_line = false # true/false - -# Add or remove newline before the ')' in a function declaration. -nl_func_decl_end = ignore # ignore/add/remove/force - -# Add or remove newline before the ')' in a function definition. -nl_func_def_end = ignore # ignore/add/remove/force - -# Overrides nl_func_decl_end when there is only one parameter. -nl_func_decl_end_single = ignore # ignore/add/remove/force - -# Overrides nl_func_def_end when there is only one parameter. -nl_func_def_end_single = ignore # ignore/add/remove/force - -# Whether to add a newline before ')' in a function declaration if '(' and ')' -# are in different lines. If false, nl_func_decl_end is used instead. -nl_func_decl_end_multi_line = false # true/false - -# Whether to add a newline before ')' in a function definition if '(' and ')' -# are in different lines. If false, nl_func_def_end is used instead. -nl_func_def_end_multi_line = false # true/false - -# Add or remove newline between '()' in a function declaration. -nl_func_decl_empty = ignore # ignore/add/remove/force - -# Add or remove newline between '()' in a function definition. -nl_func_def_empty = ignore # ignore/add/remove/force - -# Add or remove newline between '()' in a function call. -nl_func_call_empty = ignore # ignore/add/remove/force - -# Whether to add a newline after '(' in a function call if '(' and ')' are in -# different lines. -nl_func_call_start_multi_line = false # true/false - -# Whether to add a newline after each ',' in a function call if '(' and ')' -# are in different lines. -nl_func_call_args_multi_line = false # true/false - -# Whether to add a newline before ')' in a function call if '(' and ')' are in -# different lines. -nl_func_call_end_multi_line = false # true/false - -# (OC) Whether to put each Objective-C message parameter on a separate line. -# See nl_oc_msg_leave_one_liner. -nl_oc_msg_args = false # true/false - -# Add or remove newline between function signature and '{'. -nl_fdef_brace = force # ignore/add/remove/force - -# Add or remove newline between C++11 lambda signature and '{'. -nl_cpp_ldef_brace = ignore # ignore/add/remove/force - -# Add or remove newline between 'return' and the return expression. -nl_return_expr = ignore # ignore/add/remove/force - -# Whether to add a newline after semicolons, except in 'for' statements. -nl_after_semicolon = false # true/false - -# (Java) Add or remove newline between the ')' and '{{' of the double brace -# initializer. -nl_paren_dbrace_open = ignore # ignore/add/remove/force - -# Whether to add a newline after the type in an unnamed temporary -# direct-list-initialization. -nl_type_brace_init_lst = ignore # ignore/add/remove/force - -# Whether to add a newline after the open brace in an unnamed temporary -# direct-list-initialization. -nl_type_brace_init_lst_open = ignore # ignore/add/remove/force - -# Whether to add a newline before the close brace in an unnamed temporary -# direct-list-initialization. -nl_type_brace_init_lst_close = ignore # ignore/add/remove/force - -# Whether to add a newline after '{'. This also adds a newline before the -# matching '}'. -nl_after_brace_open = false # true/false - -# Whether to add a newline between the open brace and a trailing single-line -# comment. Requires nl_after_brace_open=true. -nl_after_brace_open_cmt = false # true/false - -# Whether to add a newline after a virtual brace open with a non-empty body. -# These occur in un-braced if/while/do/for statement bodies. -nl_after_vbrace_open = false # true/false - -# Whether to add a newline after a virtual brace open with an empty body. -# These occur in un-braced if/while/do/for statement bodies. -nl_after_vbrace_open_empty = false # true/false - -# Whether to add a newline after '}'. Does not apply if followed by a -# necessary ';'. -nl_after_brace_close = false # true/false - -# Whether to add a newline after a virtual brace close, -# as in 'if (foo) a++; return;'. -nl_after_vbrace_close = false # true/false - -# Add or remove newline between the close brace and identifier, -# as in 'struct { int a; } b;'. Affects enumerations, unions and -# structures. If set to ignore, uses nl_after_brace_close. -nl_brace_struct_var = ignore # ignore/add/remove/force - -# Whether to alter newlines in '#define' macros. -nl_define_macro = false # true/false - -# Whether to alter newlines between consecutive parenthesis closes. The number -# of closing parentheses in a line will depend on respective open parenthesis -# lines. -nl_squeeze_paren_close = false # true/false - -# Whether to remove blanks after '#ifxx' and '#elxx', or before '#elxx' and -# '#endif'. Does not affect top-level #ifdefs. -nl_squeeze_ifdef = false # true/false - -# Makes the nl_squeeze_ifdef option affect the top-level #ifdefs as well. -nl_squeeze_ifdef_top_level = false # true/false - -# Add or remove blank line before 'if'. -nl_before_if = force # ignore/add/remove/force - -# Add or remove blank line after 'if' statement. Add/Force work only if the -# next token is not a closing brace. -nl_after_if = force # ignore/add/remove/force - -# Add or remove blank line before 'for'. -nl_before_for = force # ignore/add/remove/force - -# Add or remove blank line after 'for' statement. -nl_after_for = force # ignore/add/remove/force - -# Add or remove blank line before 'while'. -nl_before_while = force # ignore/add/remove/force - -# Add or remove blank line after 'while' statement. -nl_after_while = force # ignore/add/remove/force - -# Add or remove blank line before 'switch'. -nl_before_switch = force # ignore/add/remove/force - -# Add or remove blank line after 'switch' statement. -nl_after_switch = force # ignore/add/remove/force - -# Add or remove blank line before 'synchronized'. -nl_before_synchronized = ignore # ignore/add/remove/force - -# Add or remove blank line after 'synchronized' statement. -nl_after_synchronized = ignore # ignore/add/remove/force - -# Add or remove blank line before 'do'. -nl_before_do = force # ignore/add/remove/force - -# Add or remove blank line after 'do/while' statement. -nl_after_do = force # ignore/add/remove/force - -# Whether to double-space commented-entries in 'struct'/'union'/'enum'. -nl_ds_struct_enum_cmt = false # true/false - -# Whether to force a newline before '}' of a 'struct'/'union'/'enum'. -# (Lower priority than eat_blanks_before_close_brace.) -nl_ds_struct_enum_close_brace = false # true/false - -# Add or remove newline before or after (depending on pos_class_colon) a class -# colon, as in 'class Foo : public Bar'. -nl_class_colon = ignore # ignore/add/remove/force - -# Add or remove newline around a class constructor colon. The exact position -# depends on nl_constr_init_args, pos_constr_colon and pos_constr_comma. -nl_constr_colon = ignore # ignore/add/remove/force - -# Whether to collapse a two-line namespace, like 'namespace foo\n{ decl; }' -# into a single line. If true, prevents other brace newline rules from turning -# such code into four lines. -nl_namespace_two_to_one_liner = false # true/false - -# Whether to remove a newline in simple unbraced if statements, turning them -# into one-liners, as in 'if(b)\n i++;' → 'if(b) i++;'. -nl_create_if_one_liner = false # true/false - -# Whether to remove a newline in simple unbraced for statements, turning them -# into one-liners, as in 'for (...)\n stmt;' → 'for (...) stmt;'. -nl_create_for_one_liner = false # true/false - -# Whether to remove a newline in simple unbraced while statements, turning -# them into one-liners, as in 'while (expr)\n stmt;' → 'while (expr) stmt;'. -nl_create_while_one_liner = false # true/false - -# Whether to collapse a function definition whose body (not counting braces) -# is only one line so that the entire definition (prototype, braces, body) is -# a single line. -nl_create_func_def_one_liner = false # true/false - -# Whether to split one-line simple unbraced if statements into two lines by -# adding a newline, as in 'if(b) i++;'. -nl_split_if_one_liner = false # true/false - -# Whether to split one-line simple unbraced for statements into two lines by -# adding a newline, as in 'for (...) stmt;'. -nl_split_for_one_liner = false # true/false - -# Whether to split one-line simple unbraced while statements into two lines by -# adding a newline, as in 'while (expr) stmt;'. -nl_split_while_one_liner = false # true/false - -# -# Blank line options -# - -# The maximum number of consecutive newlines (3 = 2 blank lines). -nl_max = 0 # unsigned number - -# The maximum number of consecutive newlines in a function. -nl_max_blank_in_func = 0 # unsigned number - -# The number of newlines before a function prototype. -nl_before_func_body_proto = 0 # unsigned number - -# The number of newlines before a multi-line function definition. -nl_before_func_body_def = 0 # unsigned number - -# The number of newlines before a class constructor/destructor prototype. -nl_before_func_class_proto = 0 # unsigned number - -# The number of newlines before a class constructor/destructor definition. -nl_before_func_class_def = 0 # unsigned number - -# The number of newlines after a function prototype. -nl_after_func_proto = 0 # unsigned number - -# The number of newlines after a function prototype, if not followed by -# another function prototype. -nl_after_func_proto_group = 0 # unsigned number - -# The number of newlines after a class constructor/destructor prototype. -nl_after_func_class_proto = 0 # unsigned number - -# The number of newlines after a class constructor/destructor prototype, -# if not followed by another constructor/destructor prototype. -nl_after_func_class_proto_group = 0 # unsigned number - -# Whether one-line method definitions inside a class body should be treated -# as if they were prototypes for the purposes of adding newlines. -# -# Requires nl_class_leave_one_liners=true. Overrides nl_before_func_body_def -# and nl_before_func_class_def for one-liners. -nl_class_leave_one_liner_groups = false # true/false - -# The number of newlines after '}' of a multi-line function body. -nl_after_func_body = 0 # unsigned number - -# The number of newlines after '}' of a multi-line function body in a class -# declaration. Also affects class constructors/destructors. -# -# Overrides nl_after_func_body. -nl_after_func_body_class = 0 # unsigned number - -# The number of newlines after '}' of a single line function body. Also -# affects class constructors/destructors. -# -# Overrides nl_after_func_body and nl_after_func_body_class. -nl_after_func_body_one_liner = 0 # unsigned number - -# The minimum number of newlines before a multi-line comment. -# Doesn't apply if after a brace open or another multi-line comment. -nl_before_block_comment = 0 # unsigned number - -# The minimum number of newlines before a single-line C comment. -# Doesn't apply if after a brace open or other single-line C comments. -nl_before_c_comment = 0 # unsigned number - -# The minimum number of newlines before a CPP comment. -# Doesn't apply if after a brace open or other CPP comments. -nl_before_cpp_comment = 0 # unsigned number - -# Whether to force a newline after a multi-line comment. -nl_after_multiline_comment = false # true/false - -# Whether to force a newline after a label's colon. -nl_after_label_colon = false # true/false - -# The number of newlines after '}' or ';' of a struct/enum/union definition. -nl_after_struct = 0 # unsigned number - -# The number of newlines before a class definition. -nl_before_class = 0 # unsigned number - -# The number of newlines after '}' or ';' of a class definition. -nl_after_class = 0 # unsigned number - -# The number of newlines before an access specifier label. This also includes -# the Qt-specific 'signals:' and 'slots:'. Will not change the newline count -# if after a brace open. -# -# 0 = No change (default). -nl_before_access_spec = 0 # unsigned number - -# The number of newlines after an access specifier label. This also includes -# the Qt-specific 'signals:' and 'slots:'. Will not change the newline count -# if after a brace open. -# -# 0 = No change (default). -# -# Overrides nl_typedef_blk_start and nl_var_def_blk_start. -nl_after_access_spec = 0 # unsigned number - -# The number of newlines between a function definition and the function -# comment, as in '// comment\n void foo() {...}'. -# -# 0 = No change (default). -nl_comment_func_def = 0 # unsigned number - -# The number of newlines after a try-catch-finally block that isn't followed -# by a brace close. -# -# 0 = No change (default). -nl_after_try_catch_finally = 0 # unsigned number - -# (C#) The number of newlines before and after a property, indexer or event -# declaration. -# -# 0 = No change (default). -nl_around_cs_property = 0 # unsigned number - -# (C#) The number of newlines between the get/set/add/remove handlers. -# -# 0 = No change (default). -nl_between_get_set = 0 # unsigned number - -# (C#) Add or remove newline between property and the '{'. -nl_property_brace = ignore # ignore/add/remove/force - -# The number of newlines after '{' of a namespace. This also adds newlines -# before the matching '}'. -# -# 0 = Apply eat_blanks_after_open_brace or eat_blanks_before_close_brace if -# applicable, otherwise no change. -# -# Overrides eat_blanks_after_open_brace and eat_blanks_before_close_brace. -nl_inside_namespace = 0 # unsigned number - -# Whether to remove blank lines after '{'. -eat_blanks_after_open_brace = false # true/false - -# Whether to remove blank lines before '}'. -eat_blanks_before_close_brace = false # true/false - -# How aggressively to remove extra newlines not in preprocessor. -# -# 0: No change (default) -# 1: Remove most newlines not handled by other config -# 2: Remove all newlines and reformat completely by config -nl_remove_extra_newlines = 0 # unsigned number - -# Whether to put a blank line before 'return' statements, unless after an open -# brace. -nl_before_return = false # true/false - -# Whether to put a blank line after 'return' statements, unless followed by a -# close brace. -nl_after_return = false # true/false - -# (Java) Add or remove newline after an annotation statement. Only affects -# annotations that are after a newline. -nl_after_annotation = ignore # ignore/add/remove/force - -# (Java) Add or remove newline between two annotations. -nl_between_annotation = ignore # ignore/add/remove/force - -# -# Positioning options -# - -# The position of arithmetic operators in wrapped expressions. -pos_arith = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force - -# The position of assignment in wrapped expressions. Do not affect '=' -# followed by '{'. -pos_assign = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force - -# The position of Boolean operators in wrapped expressions. -pos_bool = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force - -# The position of comparison operators in wrapped expressions. -pos_compare = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force - -# The position of conditional operators, as in the '?' and ':' of -# 'expr ? stmt : stmt', in wrapped expressions. -pos_conditional = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force - -# The position of the comma in wrapped expressions. -pos_comma = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force - -# The position of the comma in enum entries. -pos_enum_comma = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force - -# The position of the comma in the base class list if there is more than one -# line. Affects nl_class_init_args. -pos_class_comma = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force - -# The position of the comma in the constructor initialization list. -# Related to nl_constr_colon, nl_constr_init_args and pos_constr_colon. -pos_constr_comma = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force - -# The position of trailing/leading class colon, between class and base class -# list. Affects nl_class_colon. -pos_class_colon = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force - -# The position of colons between constructor and member initialization. -# Related to nl_constr_colon, nl_constr_init_args and pos_constr_comma. -pos_constr_colon = ignore # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force - -# -# Line splitting options -# - -# Try to limit code width to N columns. -code_width = 120 # unsigned number - -# Whether to fully split long 'for' statements at semi-colons. -ls_for_split_full = true # true/false - -# Whether to fully split long function prototypes/calls at commas. -ls_func_split_full = true # true/false - -# Whether to split lines as close to code_width as possible and ignore some -# groupings. -ls_code_width = false # true/false - -# -# Code alignment options (not left column spaces/tabs) -# - -# Whether to keep non-indenting tabs. -align_keep_tabs = false # true/false - -# Whether to use tabs for aligning. -align_with_tabs = false # true/false - -# Whether to bump out to the next tab when aligning. -align_on_tabstop = false # true/false - -# Whether to right-align numbers. -align_number_right = false # true/false - -# Whether to keep whitespace not required for alignment. -align_keep_extra_space = false # true/false - -# Whether to align variable definitions in prototypes and functions. -align_func_params = false # true/false - -# The span for aligning parameter definitions in function on parameter name. -# -# 0 = Don't align (default). -align_func_params_span = 0 # unsigned number - -# The threshold for aligning function parameter definitions. -# -# 0 = No limit (default). -align_func_params_thresh = 0 # unsigned number - -# The gap for aligning function parameter definitions. -align_func_params_gap = 0 # unsigned number - -# Whether to align parameters in single-line functions that have the same -# name. The function names must already be aligned with each other. -align_same_func_call_params = false # true/false - -# The span for aligning function-call parameters for single line functions. -# -# 0 = Don't align (default). -align_same_func_call_params_span = 0 # unsigned number - -# The threshold for aligning function-call parameters for single line -# functions. -# -# 0 = No limit (default). -align_same_func_call_params_thresh = 0 # unsigned number - -# The span for aligning variable definitions. -# -# 0 = Don't align (default). -align_var_def_span = 0 # unsigned number - -# How to align the '*' in variable definitions. -# -# 0: Part of the type 'void * foo;' (default) -# 1: Part of the variable 'void *foo;' -# 2: Dangling 'void *foo;' -align_var_def_star_style = 0 # unsigned number - -# How to align the '&' in variable definitions. -# -# 0: Part of the type 'long & foo;' (default) -# 1: Part of the variable 'long &foo;' -# 2: Dangling 'long &foo;' -align_var_def_amp_style = 0 # unsigned number - -# The threshold for aligning variable definitions. -# -# 0 = No limit (default). -align_var_def_thresh = 0 # unsigned number - -# The gap for aligning variable definitions. -align_var_def_gap = 0 # unsigned number - -# Whether to align the colon in struct bit fields. -align_var_def_colon = false # true/false - -# The gap for aligning the colon in struct bit fields. -align_var_def_colon_gap = 0 # unsigned number - -# Whether to align any attribute after the variable name. -align_var_def_attribute = false # true/false - -# Whether to align inline struct/enum/union variable definitions. -align_var_def_inline = false # true/false - -# The span for aligning on '=' in assignments. -# -# 0 = Don't align (default). -align_assign_span = 0 # unsigned number - -# The threshold for aligning on '=' in assignments. -# -# 0 = No limit (default). -align_assign_thresh = 0 # unsigned number - -# How to apply align_assign_span to function declaration "assignments", i.e. -# 'virtual void foo() = 0' or '~foo() = {default|delete}'. -# -# 0: Align with other assignments (default) -# 1: Align with each other, ignoring regular assignments -# 2: Don't align -align_assign_decl_func = 0 # unsigned number - -# The span for aligning on '=' in enums. -# -# 0 = Don't align (default). -align_enum_equ_span = 0 # unsigned number - -# The threshold for aligning on '=' in enums. -# -# 0 = no limit (default). -align_enum_equ_thresh = 0 # unsigned number - -# The span for aligning class member definitions. -# -# 0 = Don't align (default). -align_var_class_span = 0 # unsigned number - -# The threshold for aligning class member definitions. -# -# 0 = No limit (default). -align_var_class_thresh = 0 # unsigned number - -# The gap for aligning class member definitions. -align_var_class_gap = 0 # unsigned number - -# The span for aligning struct/union member definitions. -# -# 0 = Don't align (default). -align_var_struct_span = 0 # unsigned number - -# The threshold for aligning struct/union member definitions. -# -# 0 = No limit (default). -align_var_struct_thresh = 0 # unsigned number - -# The gap for aligning struct/union member definitions. -align_var_struct_gap = 0 # unsigned number - -# The span for aligning struct initializer values. -# -# 0 = Don't align (default). -align_struct_init_span = 0 # unsigned number - -# The minimum space between the type and the synonym of a typedef. -align_typedef_gap = 0 # unsigned number - -# The span for aligning single-line typedefs. -# -# 0 = Don't align (default). -align_typedef_span = 0 # unsigned number - -# How to align typedef'd functions with other typedefs. -# -# 0: Don't mix them at all (default) -# 1: Align the open parenthesis with the types -# 2: Align the function type name with the other type names -align_typedef_func = 0 # unsigned number - -# How to align the '*' in typedefs. -# -# 0: Align on typedef type, ignore '*' (default) -# 1: The '*' is part of type name: 'typedef int *pint;' -# 2: The '*' is part of the type, but dangling: 'typedef int *pint;' -align_typedef_star_style = 0 # unsigned number - -# How to align the '&' in typedefs. -# -# 0: Align on typedef type, ignore '&' (default) -# 1: The '&' is part of type name: 'typedef int &pint;' -# 2: The '&' is part of the type, but dangling: 'typedef int &pint;' -align_typedef_amp_style = 0 # unsigned number - -# The span for aligning comments that end lines. -# -# 0 = Don't align (default). -align_right_cmt_span = 0 # unsigned number - -# If aligning comments, whether to mix with comments after '}' and #endif with -# less than three spaces before the comment. -align_right_cmt_mix = false # true/false - -# Whether to only align trailing comments that are at the same brace level. -align_right_cmt_same_level = false # true/false - -# Minimum number of columns between preceding text and a trailing comment in -# order for the comment to qualify for being aligned. Must be non-zero to have -# an effect. -align_right_cmt_gap = 0 # unsigned number - -# Minimum column at which to align trailing comments. Comments which are -# aligned beyond this column, but which can be aligned in a lesser column, -# may be "pulled in". -# -# 0 = Ignore (default). -align_right_cmt_at_col = 0 # unsigned number - -# The span for aligning function prototypes. -# -# 0 = Don't align (default). -align_func_proto_span = 0 # unsigned number - -# Minimum gap between the return type and the function name. -align_func_proto_gap = 0 # unsigned number - -# Whether to align function prototypes on the 'operator' keyword instead of -# what follows. -align_on_operator = false # true/false - -# Whether to mix aligning prototype and variable declarations. If true, -# align_var_def_XXX options are used instead of align_func_proto_XXX options. -align_mix_var_proto = false # true/false - -# Whether to align single-line functions with function prototypes. -# Uses align_func_proto_span. -align_single_line_func = false # true/false - -# Whether to align the open brace of single-line functions. -# Requires align_single_line_func=true. Uses align_func_proto_span. -align_single_line_brace = false # true/false - -# Gap for align_single_line_brace. -align_single_line_brace_gap = 0 # unsigned number - -# (OC) The span for aligning Objective-C message specifications. -# -# 0 = Don't align (default). -align_oc_msg_spec_span = 0 # unsigned number - -# Whether to align macros wrapped with a backslash and a newline. This will -# not work right if the macro contains a multi-line comment. -align_nl_cont = false # true/false - -# Whether to align macro functions and variables together. -align_pp_define_together = false # true/false - -# The minimum space between label and value of a preprocessor define. -align_pp_define_gap = 0 # unsigned number - -# The span for aligning on '#define' bodies. -# -# =0: Don't align (default) -# >0: Number of lines (including comments) between blocks -align_pp_define_span = 0 # unsigned number - -# Whether to align lines that start with '<<' with previous '<<'. -# -# Default: true -align_left_shift = true # true/false - -# Whether to align text after 'asm volatile ()' colons. -align_asm_colon = false # true/false - -# (OC) Span for aligning parameters in an Objective-C message call -# on the ':'. -# -# 0 = Don't align. -align_oc_msg_colon_span = 0 # unsigned number - -# (OC) Whether to always align with the first parameter, even if it is too -# short. -align_oc_msg_colon_first = false # true/false - -# (OC) Whether to align parameters in an Objective-C '+' or '-' declaration -# on the ':'. -align_oc_decl_colon = false # true/false - -# -# Comment modification options -# - -# Try to wrap comments at N columns. -cmt_width = 0 # unsigned number - -# How to reflow comments. -# -# 0: No reflowing (apart from the line wrapping due to cmt_width) (default) -# 1: No touching at all -# 2: Full reflow -cmt_reflow_mode = 0 # unsigned number - -# Whether to convert all tabs to spaces in comments. If false, tabs in -# comments are left alone, unless used for indenting. -cmt_convert_tab_to_spaces = true # true/false - -# Whether to apply changes to multi-line comments, including cmt_width, -# keyword substitution and leading chars. -# -# Default: true -cmt_indent_multi = true # true/false - -# Whether to group c-comments that look like they are in a block. -cmt_c_group = false # true/false - -# Whether to put an empty '/*' on the first line of the combined c-comment. -cmt_c_nl_start = false # true/false - -# Whether to add a newline before the closing '*/' of the combined c-comment. -cmt_c_nl_end = false # true/false - -# Whether to change cpp-comments into c-comments. -cmt_cpp_to_c = true # true/false - -# Whether to group cpp-comments that look like they are in a block. Only -# meaningful if cmt_cpp_to_c=true. -cmt_cpp_group = false # true/false - -# Whether to put an empty '/*' on the first line of the combined cpp-comment -# when converting to a c-comment. -# -# Requires cmt_cpp_to_c=true and cmt_cpp_group=true. -cmt_cpp_nl_start = false # true/false - -# Whether to add a newline before the closing '*/' of the combined cpp-comment -# when converting to a c-comment. -# -# Requires cmt_cpp_to_c=true and cmt_cpp_group=true. -cmt_cpp_nl_end = false # true/false - -# Whether to put a star on subsequent comment lines. -cmt_star_cont = true # true/false - -# The number of spaces to insert at the start of subsequent comment lines. -cmt_sp_before_star_cont = 0 # unsigned number - -# The number of spaces to insert after the star on subsequent comment lines. -cmt_sp_after_star_cont = 0 # unsigned number - -# For multi-line comments with a '*' lead, remove leading spaces if the first -# and last lines of the comment are the same length. -# -# Default: true -cmt_multi_check_last = true # true/false - -# For multi-line comments with a '*' lead, remove leading spaces if the first -# and last lines of the comment are the same length AND if the length is -# bigger as the first_len minimum. -# -# Default: 4 -cmt_multi_first_len_minimum = 4 # unsigned number - -# Path to a file that contains text to insert at the beginning of a file if -# the file doesn't start with a C/C++ comment. If the inserted text contains -# '$(filename)', that will be replaced with the current file's name. -cmt_insert_file_header = "" # string - -# Path to a file that contains text to insert at the end of a file if the -# file doesn't end with a C/C++ comment. If the inserted text contains -# '$(filename)', that will be replaced with the current file's name. -cmt_insert_file_footer = "" # string - -# Path to a file that contains text to insert before a function definition if -# the function isn't preceded by a C/C++ comment. If the inserted text -# contains '$(function)', '$(javaparam)' or '$(fclass)', these will be -# replaced with, respectively, the name of the function, the javadoc '@param' -# and '@return' stuff, or the name of the class to which the member function -# belongs. -cmt_insert_func_header = "" # string - -# Path to a file that contains text to insert before a class if the class -# isn't preceded by a C/C++ comment. If the inserted text contains '$(class)', -# that will be replaced with the class name. -cmt_insert_class_header = "" # string - -# Path to a file that contains text to insert before an Objective-C message -# specification, if the method isn't preceded by a C/C++ comment. If the -# inserted text contains '$(message)' or '$(javaparam)', these will be -# replaced with, respectively, the name of the function, or the javadoc -# '@param' and '@return' stuff. -cmt_insert_oc_msg_header = "" # string - -# Whether a comment should be inserted if a preprocessor is encountered when -# stepping backwards from a function name. -# -# Applies to cmt_insert_oc_msg_header, cmt_insert_func_header and -# cmt_insert_class_header. -cmt_insert_before_preproc = false # true/false - -# Whether a comment should be inserted if a function is declared inline to a -# class definition. -# -# Applies to cmt_insert_func_header. -# -# Default: true -cmt_insert_before_inlines = true # true/false - -# Whether a comment should be inserted if the function is a class constructor -# or destructor. -# -# Applies to cmt_insert_func_header. -cmt_insert_before_ctor_dtor = false # true/false - -# -# Code modifying options (non-whitespace) -# - -# Add or remove braces on a single-line 'do' statement. -mod_full_brace_do = remove # ignore/add/remove/force - -# Add or remove braces on a single-line 'for' statement. -mod_full_brace_for = remove # ignore/add/remove/force - -# (Pawn) Add or remove braces on a single-line function definition. -mod_full_brace_function = force # ignore/add/remove/force - -# Add or remove braces on a single-line 'if' statement. Braces will not be -# removed if the braced statement contains an 'else'. -mod_full_brace_if = remove # ignore/add/remove/force - -# Whether to enforce that all blocks of an 'if'/'else if'/'else' chain either -# have, or do not have, braces. If true, braces will be added if any block -# needs braces, and will only be removed if they can be removed from all -# blocks. -# -# Overrides mod_full_brace_if. -mod_full_brace_if_chain = true # true/false - -# Whether to add braces to all blocks of an 'if'/'else if'/'else' chain. -# If true, mod_full_brace_if_chain will only remove braces from an 'if' that -# does not have an 'else if' or 'else'. -mod_full_brace_if_chain_only = false # true/false - -# Add or remove braces on single-line 'while' statement. -mod_full_brace_while = remove # ignore/add/remove/force - -# Add or remove braces on single-line 'using ()' statement. -mod_full_brace_using = ignore # ignore/add/remove/force - -# Don't remove braces around statements that span N newlines -mod_full_brace_nl = 0 # unsigned number - -# Whether to prevent removal of braces from 'if'/'for'/'while'/etc. blocks -# which span multiple lines. -# -# Affects: -# mod_full_brace_for -# mod_full_brace_if -# mod_full_brace_if_chain -# mod_full_brace_if_chain_only -# mod_full_brace_while -# mod_full_brace_using -# -# Does not affect: -# mod_full_brace_do -# mod_full_brace_function -mod_full_brace_nl_block_rem_mlcond = false # true/false - -# Add or remove unnecessary parenthesis on 'return' statement. -mod_paren_on_return = remove # ignore/add/remove/force - -# (Pawn) Whether to change optional semicolons to real semicolons. -mod_pawn_semicolon = false # true/false - -# Whether to fully parenthesize Boolean expressions in 'while' and 'if' -# statement, as in 'if (a && b > c)' → 'if (a && (b > c))'. -mod_full_paren_if_bool = true # true/false - -# Whether to remove superfluous semicolons. -mod_remove_extra_semicolon = true # true/false - -# If a function body exceeds the specified number of newlines and doesn't have -# a comment after the close brace, a comment will be added. -mod_add_long_function_closebrace_comment = 0 # unsigned number - -# If a namespace body exceeds the specified number of newlines and doesn't -# have a comment after the close brace, a comment will be added. -mod_add_long_namespace_closebrace_comment = 0 # unsigned number - -# If a class body exceeds the specified number of newlines and doesn't have a -# comment after the close brace, a comment will be added. -mod_add_long_class_closebrace_comment = 0 # unsigned number - -# If a switch body exceeds the specified number of newlines and doesn't have a -# comment after the close brace, a comment will be added. -mod_add_long_switch_closebrace_comment = 0 # unsigned number - -# If an #ifdef body exceeds the specified number of newlines and doesn't have -# a comment after the #endif, a comment will be added. -mod_add_long_ifdef_endif_comment = 0 # unsigned number - -# If an #ifdef or #else body exceeds the specified number of newlines and -# doesn't have a comment after the #else, a comment will be added. -mod_add_long_ifdef_else_comment = 0 # unsigned number - -# Whether to sort consecutive single-line 'import' statements. -mod_sort_import = false # true/false - -# (C#) Whether to sort consecutive single-line 'using' statements. -mod_sort_using = false # true/false - -# Whether to sort consecutive single-line '#include' statements (C/C++) and -# '#import' statements (Objective-C). Be aware that this has the potential to -# break your code if your includes/imports have ordering dependencies. -mod_sort_include = false # true/false - -# Whether to move a 'break' that appears after a fully braced 'case' before -# the close brace, as in 'case X: { ... } break;' → 'case X: { ... break; }'. -mod_move_case_break = false # true/false - -# Add or remove braces around a fully braced case statement. Will only remove -# braces if there are no variable declarations in the block. -mod_case_brace = ignore # ignore/add/remove/force - -# Whether to remove a void 'return;' that appears as the last statement in a -# function. -mod_remove_empty_return = false # true/false - -# Add or remove the comma after the last value of an enumeration. -mod_enum_last_comma = ignore # ignore/add/remove/force - -# (OC) Whether to organize the properties. If true, properties will be -# rearranged according to the mod_sort_oc_property_*_weight factors. -mod_sort_oc_properties = false # true/false - -# (OC) Weight of a class property modifier. -mod_sort_oc_property_class_weight = 0 # number - -# (OC) Weight of 'atomic' and 'nonatomic'. -mod_sort_oc_property_thread_safe_weight = 0 # number - -# (OC) Weight of 'readwrite' when organizing properties. -mod_sort_oc_property_readwrite_weight = 0 # number - -# (OC) Weight of a reference type specifier ('retain', 'copy', 'assign', -# 'weak', 'strong') when organizing properties. -mod_sort_oc_property_reference_weight = 0 # number - -# (OC) Weight of getter type ('getter=') when organizing properties. -mod_sort_oc_property_getter_weight = 0 # number - -# (OC) Weight of setter type ('setter=') when organizing properties. -mod_sort_oc_property_setter_weight = 0 # number - -# (OC) Weight of nullability type ('nullable', 'nonnull', 'null_unspecified', -# 'null_resettable') when organizing properties. -mod_sort_oc_property_nullability_weight = 0 # number - -# -# Preprocessor options -# - -# Add or remove indentation of preprocessor directives inside #if blocks -# at brace level 0 (file-level). -pp_indent = ignore # ignore/add/remove/force - -# Whether to indent #if/#else/#endif at the brace level. If false, these are -# indented from column 1. -pp_indent_at_level = false # true/false - -# Specifies the number of columns to indent preprocessors per level -# at brace level 0 (file-level). If pp_indent_at_level=false, also specifies -# the number of columns to indent preprocessors per level -# at brace level > 0 (function-level). -# -# Default: 1 -pp_indent_count = 1 # unsigned number - -# Add or remove space after # based on pp_level of #if blocks. -pp_space = force # ignore/add/remove/force - -# Sets the number of spaces per level added with pp_space. -pp_space_count = 3 # unsigned number - -# The indent for '#region' and '#endregion' in C# and '#pragma region' in -# C/C++. Negative values decrease indent down to the first column. -pp_indent_region = 0 # number - -# Whether to indent the code between #region and #endregion. -pp_region_indent_code = false # true/false - -# If pp_indent_at_level=true, sets the indent for #if, #else and #endif when -# not at file-level. Negative values decrease indent down to the first column. -# -# =0: Indent preprocessors using output_tab_size -# >0: Column at which all preprocessors will be indented -pp_indent_if = 0 # number - -# Whether to indent the code between #if, #else and #endif. -pp_if_indent_code = false # true/false - -# Whether to indent '#define' at the brace level. If false, these are -# indented from column 1. -pp_define_at_level = false # true/false - -# Whether to ignore the '#define' body while formatting. -pp_ignore_define_body = false # true/false - -# Whether to indent case statements between #if, #else, and #endif. -# Only applies to the indent of the preprocesser that the case statements -# directly inside of. -# -# Default: true -pp_indent_case = true # true/false - -# Whether to indent whole function definitions between #if, #else, and #endif. -# Only applies to the indent of the preprocesser that the function definition -# is directly inside of. -# -# Default: true -pp_indent_func_def = true # true/false - -# Whether to indent extern C blocks between #if, #else, and #endif. -# Only applies to the indent of the preprocesser that the extern block is -# directly inside of. -# -# Default: true -pp_indent_extern = true # true/false - -# Whether to indent braces directly inside #if, #else, and #endif. -# Only applies to the indent of the preprocesser that the braces are directly -# inside of. -# -# Default: true -pp_indent_brace = true # true/false - -# -# Sort includes options -# - -# The regex for include category with priority 0. -include_category_0 = "" # string - -# The regex for include category with priority 1. -include_category_1 = "" # string - -# The regex for include category with priority 2. -include_category_2 = "" # string - -# -# Use or Do not Use options -# - -# true: indent_func_call_param will be used (default) -# false: indent_func_call_param will NOT be used -# -# Default: true -use_indent_func_call_param = true # true/false - -# The value of the indentation for a continuation line is calculated -# differently if the statement is: -# - a declaration: your case with QString fileName ... -# - an assignment: your case with pSettings = new QSettings( ... -# -# At the second case the indentation value might be used twice: -# - at the assignment -# - at the function call (if present) -# -# To prevent the double use of the indentation value, use this option with the -# value 'true'. -# -# true: indent_continue will be used only once -# false: indent_continue will be used every time (default) -use_indent_continue_only_once = false # true/false - -# The value might be used twice: -# - at the assignment -# - at the opening brace -# -# To prevent the double use of the indentation value, use this option with the -# value 'true'. -# -# true: indentation will be used only once -# false: indentation will be used every time (default) -indent_cpp_lambda_only_once = false # true/false - -# Whether to apply special formatting for Qt SIGNAL/SLOT macros. Essentially, -# this tries to format these so that they match Qt's normalized form (i.e. the -# result of QMetaObject::normalizedSignature), which can slightly improve the -# performance of the QObject::connect call, rather than how they would -# otherwise be formatted. -# -# See options_for_QT.cpp for details. -# -# Default: true -use_options_overriding_for_qt_macros = true # true/false - -# -# Warn levels - 1: error, 2: warning (default), 3: note -# - -# (C#) Warning is given if doing tab-to-\t replacement and we have found one -# in a C# verbatim string literal. -# -# Default: 2 -warn_level_tabs_found_in_verbatim_string_literals = 2 # unsigned number - -# Meaning of the settings: -# Ignore - do not do any changes -# Add - makes sure there is 1 or more space/brace/newline/etc -# Force - makes sure there is exactly 1 space/brace/newline/etc, -# behaves like Add in some contexts -# Remove - removes space/brace/newline/etc -# -# -# - Token(s) can be treated as specific type(s) with the 'set' option: -# `set tokenType tokenString [tokenString...]` -# -# Example: -# `set BOOL __AND__ __OR__` -# -# tokenTypes are defined in src/token_enum.h, use them without the -# 'CT_' prefix: 'CT_BOOL' → 'BOOL' -# -# -# - Token(s) can be treated as type(s) with the 'type' option. -# `type tokenString [tokenString...]` -# -# Example: -# `type int c_uint_8 Rectangle` -# -# This can also be achieved with `set TYPE int c_uint_8 Rectangle` -# -# -# To embed whitespace in tokenStrings use the '\' escape character, or quote -# the tokenStrings. These quotes are supported: "'` -# -# -# - Support for the auto detection of languages through the file ending can be -# added using the 'file_ext' command. -# `file_ext langType langString [langString..]` -# -# Example: -# `file_ext CPP .ch .cxx .cpp.in` -# -# langTypes are defined in uncrusify_types.h in the lang_flag_e enum, use -# them without the 'LANG_' prefix: 'LANG_CPP' → 'CPP' -# -# -# - Custom macro-based indentation can be set up using 'macro-open', -# 'macro-else' and 'macro-close'. -# `(macro-open | macro-else | macro-close) tokenString` -# -# Example: -# `macro-open BEGIN_TEMPLATE_MESSAGE_MAP` -# `macro-open BEGIN_MESSAGE_MAP` -# `macro-close END_MESSAGE_MAP` -# -# -# option(s) with 'not default' value: 87 -# -- cgit v1.2.1