From 2effa898dc268764f73171d1e363023bbd77010c Mon Sep 17 00:00:00 2001
From: Alexander Wenzel <Alexander.AW.Wenzel@bmw.de>
Date: Thu, 15 Sep 2011 15:43:22 +0200
Subject: Added configuration file parameter -c.

---
 testscripts/dlt.conf | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 testscripts/dlt.conf

(limited to 'testscripts')

diff --git a/testscripts/dlt.conf b/testscripts/dlt.conf
new file mode 100644
index 0000000..e9101e4
--- /dev/null
+++ b/testscripts/dlt.conf
@@ -0,0 +1,75 @@
+# Configuration file of DLT daemon
+#
+# Configurations made here will overwrite settings by command line
+
+########################################################################
+# General configuration                                                #
+########################################################################
+
+# Start daemon in dubug mode, so that all internal debug information is printed out on the console
+Verbose = 1
+
+# Daemonize DLT daemon, if it is started as daemon
+# Daemonize = 1
+
+# Send DLT messages with serial header
+# SendSerialHeader = 1
+
+# Send automatic get log info response during context registration
+# SendContextRegistration = 1
+
+# Set ECU ID (Default: ECU1)
+ECUId = ENAE
+
+# Enable filtering of messages
+# FilterFilename = ~/tmp/filter
+
+# Size of the ringbuffer in bytes (Default: 10024)
+# RingbufferSize = 10024
+
+# Directory where to store the persistant configuration (Default: /tmp)
+PersistanceStoragePath = ~/tmp
+
+########################################################################
+# Local file output configuration                                      #
+########################################################################
+
+# Store DLT messages to local log file
+# LocalLogFilename = ~/tmp/local_log.dlt
+
+########################################################################
+# Local console output configuration                                   #
+########################################################################
+
+# Print DLT messages; payload as ASCII
+PrintASCII = 1
+
+# Print DLT messages; payload as hex
+# PrintHex = 1
+
+# Print DLT messages; only headers
+# PrintHeadersOnly = 1
+
+
+########################################################################
+# Client Serial port configuration                                     #
+########################################################################
+
+# Additional support for serial device
+# If a device name is set serial port is enabled.
+# RS232DeviceName = /dev/ttyS0
+
+# Serial device baudrate (Default: 115200)
+# RS232Baudrate = 115200
+
+# Sync to serial header on serial connection
+# RS232SyncSerialHeader = 1
+
+########################################################################
+# TCP Serial port configuration                                     #
+########################################################################
+
+# Sync to serial header on all TCP connections
+# TCPSyncSerialHeader = 1
+
+
-- 
cgit v1.2.1