From 3d66b53ceb985014b0ae72cad6cafe8c07325209 Mon Sep 17 00:00:00 2001 From: Christian Muck Date: Fri, 16 Sep 2011 14:37:31 +0200 Subject: Bugfix [GSW-72] Can't open /etc/rc.d/init.d/functions. Provide versions for different distros --- testscripts/CMakeLists.txt | 36 +++++++- testscripts/Meego/dlt-daemon.cmake | 83 +++++++++++++++++ testscripts/Ubuntu/dlt-daemon.cmake | 172 ++++++++++++++++++++++++++++++++++++ testscripts/dltdaemon | 64 -------------- testscripts/dltinfo.sh | 24 ----- 5 files changed, 288 insertions(+), 91 deletions(-) create mode 100755 testscripts/Meego/dlt-daemon.cmake create mode 100755 testscripts/Ubuntu/dlt-daemon.cmake delete mode 100755 testscripts/dltdaemon delete mode 100755 testscripts/dltinfo.sh (limited to 'testscripts') diff --git a/testscripts/CMakeLists.txt b/testscripts/CMakeLists.txt index 28e75f7..16d618f 100755 --- a/testscripts/CMakeLists.txt +++ b/testscripts/CMakeLists.txt @@ -34,7 +34,37 @@ # # @licence end@ ######## - -install(PROGRAMS dltdaemon dltinfo.sh - DESTINATION bin +if(UNIX) + if(CMAKE_SYSTEM_NAME MATCHES "Linux") + if(EXISTS "/etc/issue") + FILE(READ "/etc/issue" LINUX_ISSUE) + # Fedora case + if(LINUX_ISSUE MATCHES "Fedora") + set(DISTRIBUTION "Fedora") + endif(LINUX_ISSUE MATCHES "Fedora") + # Ubuntu case + if(LINUX_ISSUE MATCHES "Ubuntu") + set(DISTRIBUTION "Ubuntu") + endif(LINUX_ISSUE MATCHES "Ubuntu") + # Debian case + if(LINUX_ISSUE MATCHES "Debian") + set(DISTRIBUTION "Debian") + endif(LINUX_ISSUE MATCHES "Debian") + # Open SuSE case + if(LINUX_ISSUE MATCHES "SUSE") + set(DISTRIBUTION "SUSE") + endif(LINUX_ISSUE MATCHES "SUSE") + if(LINUX_ISSUE MATCHES "Meego") + set(DISTRIBUTION "Meego") + endif(LINUX_ISSUE MATCHES "Meego") + + install(PROGRAMS ${DISTRIBUTION}/dlt-daemon + DESTINATION /etc/init.d/ COMPONENT base) + + endif(EXISTS "/etc/issue") + endif(CMAKE_SYSTEM_NAME MATCHES "Linux") +endif(UNIX) + + + diff --git a/testscripts/Meego/dlt-daemon.cmake b/testscripts/Meego/dlt-daemon.cmake new file mode 100755 index 0000000..a2e908e --- /dev/null +++ b/testscripts/Meego/dlt-daemon.cmake @@ -0,0 +1,83 @@ +#!/bin/sh +# +# Starts the DLT Daemon +# +# chkconfig: 2345 21 87 +# description: Provides DLT Debug Logging & Trace functionality +# processname: dlt-daemon + +# Source function library. +. /etc/rc.d/init.d/functions + + +processname=dlt-daemon +processpath=@CMAKE_INSTALL_PREFIX@/bin +servicename=dlt-daemon + + +[ -x $processpath ] || exit 0 + +start() { + echo -n $"Starting $processname daemon: " + @CMAKE_INSTALL_PREFIX@/bin/dlt-daemon -d +} + +stop() { + echo -n $"Stopping $processname daemon: " + killproc $servicename -TERM + RETVAL=$? + echo + [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$servicename +} + +RETVAL=0 + +case "$1" in + start) + start + ;; + stop) + stop + ;; + restart) + stop + start + ;; + condrestart) + if [ -f /var/lock/subsys/$servicename ]; then + stop + start + fi + ;; + reload) + restart + ;; + status) + status $processname + pidofdlt=`pidof $processname` + if [ $pidofdlt ] + then + echo "DLT Deamon is running with PID:$pidofdlt" + else + echo "DLT Daemon is NOT running" + fi + + if [ -f /var/log/messages ] + then + echo "------- messages ----------------" + cat /var/log/messages | grep -a DLT | tail + fi + + if [ -f /var/log/syslog ] + then + echo "------- SYSLOG -------------------" + cat /var/log/syslog | grep -a DLT | tail + fi + RETVAL=$? + ;; + *) + echo $"Usage: $0 {start|stop|status|restart|condrestart|reload}" + ;; +esac + +exit $RETVAL diff --git a/testscripts/Ubuntu/dlt-daemon.cmake b/testscripts/Ubuntu/dlt-daemon.cmake new file mode 100755 index 0000000..e7ef098 --- /dev/null +++ b/testscripts/Ubuntu/dlt-daemon.cmake @@ -0,0 +1,172 @@ +#!/bin/sh +### BEGIN INIT INFO +# Provides: dlt-daemon +# Required-Start: $network $local_fs +# Required-Stop: +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: +# Description: +# <...> +# <...> +### END INIT INFO + +# Author: root + +# PATH should only include /usr/* if it runs after the mountnfs.sh script +PATH=/sbin:/usr/sbin:/bin:/usr/bin +DESC=dlt-daemon # Introduce a short description here +NAME=dlt-daemon # Introduce the short server's name here +DAEMON=@CMAKE_INSTALL_PREFIX@/bin/dlt-daemon # Introduce the server's location here +DAEMON_ARGS="-d" # Arguments to run the daemon with +PIDFILE=/var/run/$NAME.pid +SCRIPTNAME=/etc/init.d/$NAME + +# Exit if the package is not installed +[ -x $DAEMON ] || exit 0 + +# Read configuration variable file if it is present +[ -r /etc/default/$NAME ] && . /etc/default/$NAME + +# Load the VERBOSE setting and other rcS variables +. /lib/init/vars.sh + +# Define LSB log_* functions. +# Depend on lsb-base (>= 3.0-6) to ensure that this file is present. +. /lib/lsb/init-functions + +# +# Function that starts the daemon/service +# +do_start() +{ + # Return + # 0 if daemon has been started + # 1 if daemon was already running + # 2 if daemon could not be started + start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ + || return 1 + start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \ + $DAEMON_ARGS \ + || return 2 + # Add code here, if necessary, that waits for the process to be ready + # to handle requests from services started subsequently which depend + # on this one. As a last resort, sleep for some time. +} + +# +# Function that stops the daemon/service +# +do_stop() +{ + # Return + # 0 if daemon has been stopped + # 1 if daemon was already stopped + # 2 if daemon could not be stopped + # other if a failure occurred + start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME + RETVAL="$?" + [ "$RETVAL" = 2 ] && return 2 + # Wait for children to finish too if this is a daemon that forks + # and if the daemon is only ever run from this initscript. + # If the above conditions are not satisfied then add some other code + # that waits for the process to drop all resources that could be + # needed by services started subsequently. A last resort is to + # sleep for some time. + start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON + [ "$?" = 2 ] && return 2 + # Many daemons don't delete their pidfiles when they exit. + rm -f $PIDFILE + return "$RETVAL" +} + +# +# Function that sends a SIGHUP to the daemon/service +# +do_reload() { + # + # If the daemon can reload its configuration without + # restarting (for example, when it is sent a SIGHUP), + # then implement that here. + # + start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME + return 0 +} + +case "$1" in + start) + [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME" + do_start + case "$?" in + 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; + 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; + esac + ;; + stop) + [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" + do_stop + case "$?" in + 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; + 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; + esac + ;; + status) + if [ -f /var/log/messages ] + then + log_daemon_msg "------- messages ----------------" + cat /var/log/messages | grep -a DLT | tail + fi + + if [ -f /var/log/syslog ] + then + log_daemon_msg "------- SYSLOG -------------------" + cat /var/log/syslog | grep -a DLT | tail + fi + + status_of_proc "$DAEMON" "$NAME" || exit $? + + pidofdlt=`pidof $DESC` + if [ $pidofdlt ] + then + log_daemon_msg "$NAME has the PID:$pidofdlt" + fi + + + ;; + #reload|force-reload) + # + # If do_reload() is not implemented then leave this commented out + # and leave 'force-reload' as an alias for 'restart'. + # + #log_daemon_msg "Reloading $DESC" "$NAME" + #do_reload + #log_end_msg $? + #;; + restart|force-reload) + # + # If the "reload" option is implemented then remove the + # 'force-reload' alias + # + log_daemon_msg "Restarting $DESC" "$NAME" + do_stop + case "$?" in + 0|1) + do_start + case "$?" in + 0) log_end_msg 0 ;; + 1) log_end_msg 1 ;; # Old process is still running + *) log_end_msg 1 ;; # Failed to start + esac + ;; + *) + # Failed to stop + log_end_msg 1 + ;; + esac + ;; + *) + #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 + echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 + exit 3 + ;; +esac diff --git a/testscripts/dltdaemon b/testscripts/dltdaemon deleted file mode 100755 index baf3b8e..0000000 --- a/testscripts/dltdaemon +++ /dev/null @@ -1,64 +0,0 @@ -#!/bin/sh -# -# Starts the DLT Daemon -# -# chkconfig: 2345 21 87 -# description: Provides DLT Debug Logging & Trace functionality -# processname: dlt-daemon - -# Source function library. -. /etc/rc.d/init.d/functions - - -processname=dlt-daemon -processpath=/usr/bin -servicename=dlt-daemon - - -[ -x $processpath ] || exit 0 - -start() { - echo -n $"Starting $processname daemon: " - /usr/bin/dlt-daemon -d -} - -stop() { - echo -n $"Stopping $processname daemon: " - killproc $servicename -TERM - RETVAL=$? - echo - [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$servicename -} - -RETVAL=0 - -case "$1" in - start) - start - ;; - stop) - stop - ;; - restart) - stop - start - ;; - condrestart) - if [ -f /var/lock/subsys/$servicename ]; then - stop - start - fi - ;; - reload) - restart - ;; - status) - status $processname - RETVAL=$? - ;; - *) - echo $"Usage: $0 {start|stop|status|restart|condrestart|reload}" - ;; -esac - -exit $RETVAL diff --git a/testscripts/dltinfo.sh b/testscripts/dltinfo.sh deleted file mode 100755 index 3e70ab5..0000000 --- a/testscripts/dltinfo.sh +++ /dev/null @@ -1,24 +0,0 @@ -#!/bin/sh -clear -processname="dlt-daemon" -pidofdlt=`pidof $processname` - -if [ $pidofdlt ] - then - echo "DLT Deamon is running with PID:$pidofdlt" - else - echo "DLT Daemon is NOT running" -fi - -if [ -f /var/log/messages ] - then -echo "------- messages ----------------" -cat /var/log/messages | grep -a DLT | tail -fi - -if [ -f /var/log/syslog ] - then - echo "------- SYSLOG -------------------" - cat /var/log/syslog | grep -a DLT | tail -fi - -- cgit v1.2.1