libnm/docs: don't document NM_SETTING_NAME property

NM_SETTING_NAME is a special property that only has relevance
to libnm. It is inherited by all NMSetting instances. It is
read-only, and it has no corresponding value on D-Bus or nmcli.

Skip it during generate-setting-docs.py.

This also drops it from `man nm-settings`, where it doesn't belong.

2 files changed, 1 insertions, 43 deletions

diff --git a/clients/common/settings-docs.h.in b/clients/common/settings-docs.h.in
index 886c8f0c70..69d2f02348 100644
--- a/clients/common/settings-docs.h.in
+++ b/clients/common/settings-docs.h.in
@@ -1,10 +1,8 @@
 /* Generated file. Do not edit. */
 
-#define DESCRIBE_DOC_NM_SETTING_6LOWPAN_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_6LOWPAN_PARENT N_("If given, specifies the parent interface name or parent connection UUID from which this 6LowPAN interface should be created.")
 #define DESCRIBE_DOC_NM_SETTING_OLPC_MESH_CHANNEL N_("Channel on which the mesh network to join is located.")
 #define DESCRIBE_DOC_NM_SETTING_OLPC_MESH_DHCP_ANYCAST_ADDRESS N_("Anycast DHCP MAC address used when requesting an IP address via DHCP. The specific anycast address used determines which DHCP server class answers the request.")
-#define DESCRIBE_DOC_NM_SETTING_OLPC_MESH_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_OLPC_MESH_SSID N_("SSID of the mesh network to join.")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_BAND N_("802.11 frequency band of the network.  One of \"a\" for 5GHz 802.11a or \"bg\" for 2.4GHz 802.11.  This will lock associations to the Wi-Fi network to the specific band, i.e. if \"a\" is specified, the device will not associate with the same network in the 2.4GHz band even if the network's settings are compatible.  This setting depends on specific driver capability and may not work with all drivers.")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_BSSID N_("If specified, directs the device to only associate with the given access point.  This capability is highly driver dependent and not supported by all devices.  Note: this property does not control the BSSID used when creating an Ad-Hoc network and is unlikely to in the future.")
@@ -17,7 +15,6 @@
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_MAC_ADDRESS_RANDOMIZATION N_("One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address). This property is deprecated for 'cloned-mac-address'. Deprecated: 1")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_MODE N_("Wi-Fi network mode; one of \"infrastructure\", \"adhoc\" or \"ap\".  If blank, infrastructure is assumed.")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_MTU N_("If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.")
-#define DESCRIBE_DOC_NM_SETTING_WIRELESS_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_POWERSAVE N_("One of NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2) (disable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_ENABLE (3) (enable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1) (don't touch currently configure setting) or NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0) (use the globally configured value). All other values are reserved.")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_RATE N_("If non-zero, directs the device to only use the specified bitrate for communication with the access point.  Units are in Kb/s, ie 5500 = 5.5 Mbit/s.  This property is highly driver dependent and not all devices support setting a static bitrate.")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_SEEN_BSSIDS N_("A list of BSSIDs (each BSSID formatted as a MAC address like \"00:11:22:33:44:55\") that have been detected as part of the Wi-Fi network.  NetworkManager internally tracks previously seen BSSIDs. The property is only meant for reading and reflects the BSSID list of NetworkManager. The changes you make to this property will not be preserved.")
@@ -31,7 +28,6 @@
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD N_("The login password for legacy LEAP connections (ie, key-mgmt = \"ieee8021x\" and auth-alg = \"leap\").")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD_FLAGS N_("Flags indicating how to handle the \"leap-password\" property.")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_SECURITY_LEAP_USERNAME N_("The login username for legacy LEAP connections (ie, key-mgmt = \"ieee8021x\" and auth-alg = \"leap\").")
-#define DESCRIBE_DOC_NM_SETTING_WIRELESS_SECURITY_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_SECURITY_PAIRWISE N_("A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of \"tkip\" or \"ccmp\".")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_SECURITY_PMF N_("Indicates whether Protected Management Frames (802.11w) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE (1) (disable PMF), NM_SETTING_WIRELESS_SECURITY_PMF_OPTIONAL (2) (enable PMF if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (3) (enable PMF and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) and no global default is set, PMF will be optionally enabled.")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_SECURITY_PROTO N_("List of strings specifying the allowed WPA protocol versions to use. Each element may be one \"wpa\" (allow WPA) or \"rsn\" (allow WPA2/RSN).  If not specified, both WPA and RSN connections are allowed.")
@@ -58,7 +54,6 @@
 #define DESCRIBE_DOC_NM_SETTING_802_1X_DOMAIN_SUFFIX_MATCH N_("Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison.")
 #define DESCRIBE_DOC_NM_SETTING_802_1X_EAP N_("The allowed EAP method to be used when authenticating to the network with 802.1x.  Valid methods are: \"leap\", \"md5\", \"tls\", \"peap\", \"ttls\", \"pwd\", and \"fast\".  Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations.")
 #define DESCRIBE_DOC_NM_SETTING_802_1X_IDENTITY N_("Identity string for EAP authentication methods.  Often the user's user or login name.")
-#define DESCRIBE_DOC_NM_SETTING_802_1X_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_802_1X_PAC_FILE N_("UTF-8 encoded file path containing PAC for EAP-FAST.")
 #define DESCRIBE_DOC_NM_SETTING_802_1X_PASSWORD N_("UTF-8 encoded password used for EAP authentication methods. If both the \"password\" property and the \"password-raw\" property are specified, \"password\" is preferred.")
 #define DESCRIBE_DOC_NM_SETTING_802_1X_PASSWORD_FLAGS N_("Flags indicating how to handle the \"password\" property.")
@@ -97,7 +92,6 @@
 #define DESCRIBE_DOC_NM_SETTING_WIRED_MAC_ADDRESS N_("If specified, this connection will only apply to the Ethernet device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_MAC_ADDRESS_BLACKLIST N_("If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list.  Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55).")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_MTU N_("If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.")
-#define DESCRIBE_DOC_NM_SETTING_WIRED_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_PORT N_("Specific port type to use if the device supports multiple attachment methods.  One of \"tp\" (Twisted Pair), \"aui\" (Attachment Unit Interface), \"bnc\" (Thin Ethernet) or \"mii\" (Media Independent Interface). If the device supports only one port type, this setting is ignored.")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_S390_NETTYPE N_("s390 network device type; one of \"qeth\", \"lcs\", or \"ctc\", representing the different types of virtual network devices available on s390 systems.")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_S390_OPTIONS N_("Dictionary of key/value pairs of s390-specific device options.  Both keys and values must be strings.  Allowed keys include \"portno\", \"layer2\", \"portname\", \"protocol\", among others.  Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).")
@@ -106,7 +100,6 @@
 #define DESCRIBE_DOC_NM_SETTING_WIRED_WAKE_ON_LAN N_("The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager).")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_WAKE_ON_LAN_PASSWORD N_("If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address.  If NULL, no password will be required.")
 #define DESCRIBE_DOC_NM_SETTING_ADSL_ENCAPSULATION N_("Encapsulation of ADSL connection.  Can be \"vcmux\" or \"llc\".")
-#define DESCRIBE_DOC_NM_SETTING_ADSL_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_ADSL_PASSWORD N_("Password used to authenticate with the ADSL service.")
 #define DESCRIBE_DOC_NM_SETTING_ADSL_PASSWORD_FLAGS N_("Flags indicating how to handle the \"password\" property.")
 #define DESCRIBE_DOC_NM_SETTING_ADSL_PROTOCOL N_("ADSL connection protocol.  Can be \"pppoa\", \"pppoe\" or \"ipoatm\".")
@@ -114,9 +107,7 @@
 #define DESCRIBE_DOC_NM_SETTING_ADSL_VCI N_("VCI of ADSL connection")
 #define DESCRIBE_DOC_NM_SETTING_ADSL_VPI N_("VPI of ADSL connection")
 #define DESCRIBE_DOC_NM_SETTING_BLUETOOTH_BDADDR N_("The Bluetooth address of the device.")
-#define DESCRIBE_DOC_NM_SETTING_BLUETOOTH_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_BLUETOOTH_TYPE N_("Either \"dun\" for Dial-Up Networking connections or \"panu\" for Personal Area Networking connections to devices supporting the NAP profile.")
-#define DESCRIBE_DOC_NM_SETTING_BOND_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_BOND_OPTIONS N_("Dictionary of key/value pairs of bonding options.  Both keys and values must be strings. Option names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_AGEING_TIME N_("The Ethernet MAC address aging time, in seconds.")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_FORWARD_DELAY N_("The Spanning Tree Protocol (STP) forwarding delay, in seconds.")
@@ -125,15 +116,12 @@
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_MAC_ADDRESS N_("If specified, the MAC address of bridge. When creating a new bridge, this MAC address will be set. If this field is left unspecified, the \"ethernet.cloned-mac-address\" is referred instead to generate the initial MAC address. Note that setting \"ethernet.cloned-mac-address\" anyway overwrites the MAC address of the bridge later while activating the bridge. Hence, this property is deprecated. Deprecated: 1")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_MAX_AGE N_("The Spanning Tree Protocol (STP) maximum message age, in seconds.")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_MULTICAST_SNOOPING N_("Controls whether IGMP snooping is enabled for this bridge. Note that if snooping was automatically disabled due to hash collisions, the system may refuse to enable the feature until the collisions are resolved.")
-#define DESCRIBE_DOC_NM_SETTING_BRIDGE_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_PRIORITY N_("Sets the Spanning Tree Protocol (STP) priority for this bridge.  Lower values are \"better\"; the lowest priority bridge will be elected the root bridge.")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_STP N_("Controls whether Spanning Tree Protocol (STP) is enabled for this bridge.")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_PORT_HAIRPIN_MODE N_("Enables or disables \"hairpin mode\" for the port, which allows frames to be sent back out through the port the frame was received on.")
-#define DESCRIBE_DOC_NM_SETTING_BRIDGE_PORT_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_PORT_PATH_COST N_("The Spanning Tree Protocol (STP) port cost for destinations via this port.")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_PORT_PRIORITY N_("The Spanning Tree Protocol (STP) priority of this bridge port.")
 #define DESCRIBE_DOC_NM_SETTING_CDMA_MTU N_("If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.")
-#define DESCRIBE_DOC_NM_SETTING_CDMA_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_CDMA_NUMBER N_("The number to dial to establish the connection to the CDMA-based mobile broadband network, if any.  If not specified, the default number (#777) is used when required.")
 #define DESCRIBE_DOC_NM_SETTING_CDMA_PASSWORD N_("The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here.")
 #define DESCRIBE_DOC_NM_SETTING_CDMA_PASSWORD_FLAGS N_("Flags indicating how to handle the \"password\" property.")
@@ -150,7 +138,6 @@
 #define DESCRIBE_DOC_NM_SETTING_CONNECTION_MASTER N_("Interface name of the master device or UUID of the master connection.")
 #define DESCRIBE_DOC_NM_SETTING_CONNECTION_MDNS N_("Whether mDNS is enabled for the connection. The permitted values are: yes: register hostname and resolving for the connection, no: disable mDNS for the interface, resolve: do not register hostname but allow resolving of mDNS host names. When updating this property on a currently activated connection, the change takes effect immediately. This feature requires a plugin which supports mDNS. One such plugin is dns-systemd-resolved.")
 #define DESCRIBE_DOC_NM_SETTING_CONNECTION_METERED N_("Whether the connection is metered. When updating this property on a currently activated connection, the change takes effect immediately.")
-#define DESCRIBE_DOC_NM_SETTING_CONNECTION_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_CONNECTION_PERMISSIONS N_("An array of strings defining what access a given user has to this connection.  If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list.  When this is not empty, the connection can be active only when one of the specified users is logged into an active session.  Each entry is of the form \"[type]:[id]:[reserved]\"; for example, \"user:dcbw:blah\". At this time only the \"user\" [type] is allowed.  Any other values are ignored and reserved for future use.  [id] is the username that this permission refers to, which may not contain the \":\" character. Any [reserved] information present must be ignored and is reserved for future use.  All of [type], [id], and [reserved] must be valid UTF-8.")
 #define DESCRIBE_DOC_NM_SETTING_CONNECTION_READ_ONLY N_("FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified.")
 #define DESCRIBE_DOC_NM_SETTING_CONNECTION_SECONDARIES N_("List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported.")
@@ -167,7 +154,6 @@
 #define DESCRIBE_DOC_NM_SETTING_DCB_APP_FIP_PRIORITY N_("The highest User Priority (0 - 7) which FIP frames should use, or -1 for default priority.  Only used when the \"app-fip-flags\" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.")
 #define DESCRIBE_DOC_NM_SETTING_DCB_APP_ISCSI_FLAGS N_("Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).")
 #define DESCRIBE_DOC_NM_SETTING_DCB_APP_ISCSI_PRIORITY N_("The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for default priority. Only used when the \"app-iscsi-flags\" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.")
-#define DESCRIBE_DOC_NM_SETTING_DCB_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_BANDWIDTH N_("An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents.")
 #define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_FLOW_CONTROL N_("An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause.")
 #define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_FLOW_CONTROL_FLAGS N_("Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).")
@@ -176,13 +162,10 @@
 #define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_GROUP_ID N_("An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group.")
 #define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_STRICT_BANDWIDTH N_("An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group.")
 #define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_TRAFFIC_CLASS N_("An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped.")
-#define DESCRIBE_DOC_NM_SETTING_DUMMY_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
-#define DESCRIBE_DOC_NM_SETTING_GENERIC_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_GSM_APN N_("The GPRS Access Point Name specifying the APN used when establishing a data session with the GSM-based network.  The APN often determines how the user will be billed for their network usage and whether the user has access to the Internet or just a provider-specific walled-garden, so it is important to use the correct APN for the user's mobile broadband plan. The APN may only be composed of the characters a-z, 0-9, ., and - per GSM 03.60 Section 14.9.")
 #define DESCRIBE_DOC_NM_SETTING_GSM_DEVICE_ID N_("The device unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will only apply to the specified device.")
 #define DESCRIBE_DOC_NM_SETTING_GSM_HOME_ONLY N_("When TRUE, only connections to the home network will be allowed. Connections to roaming networks will not be made.")
 #define DESCRIBE_DOC_NM_SETTING_GSM_MTU N_("If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.")
-#define DESCRIBE_DOC_NM_SETTING_GSM_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_GSM_NETWORK_ID N_("The Network ID (GSM LAI format, ie MCC-MNC) to force specific network registration.  If the Network ID is specified, NetworkManager will attempt to force the device to register only on the specified network. This can be used to ensure that the device does not roam when direct roaming control of the device is not otherwise possible.")
 #define DESCRIBE_DOC_NM_SETTING_GSM_NUMBER N_("Number to dial when establishing a PPP data session with the GSM-based mobile broadband network.  Many modems do not require PPP for connections to the mobile network and thus this property should be left blank, which allows NetworkManager to select the appropriate settings automatically.")
 #define DESCRIBE_DOC_NM_SETTING_GSM_PASSWORD N_("The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here.")
@@ -194,7 +177,6 @@
 #define DESCRIBE_DOC_NM_SETTING_GSM_USERNAME N_("The username used to authenticate with the network, if required.  Many providers do not require a username, or accept any username.  But if a username is required, it is specified here.")
 #define DESCRIBE_DOC_NM_SETTING_INFINIBAND_MAC_ADDRESS N_("If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).")
 #define DESCRIBE_DOC_NM_SETTING_INFINIBAND_MTU N_("If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.")
-#define DESCRIBE_DOC_NM_SETTING_INFINIBAND_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_INFINIBAND_P_KEY N_("The InfiniBand P_Key to use for this device. A value of -1 means to use the default P_Key (aka \"the P_Key at index 0\").  Otherwise it is a 16-bit unsigned integer, whose high bit is set if it is a \"full membership\" P_Key.")
 #define DESCRIBE_DOC_NM_SETTING_INFINIBAND_PARENT N_("The interface name of the parent device of this device. Normally NULL, but if the \"p_key\" property is set, then you must specify the base device by setting either this property or \"mac-address\".")
 #define DESCRIBE_DOC_NM_SETTING_INFINIBAND_TRANSPORT_MODE N_("The IP-over-InfiniBand transport mode. Either \"datagram\" or \"connected\".")
@@ -205,7 +187,6 @@
 #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_LOCAL N_("The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address.")
 #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_MODE N_("The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2).")
 #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_MTU N_("If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments.")
-#define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_OUTPUT_KEY N_("The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used.")
 #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_PARENT N_("If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface.")
 #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_PATH_MTU_DISCOVERY N_("Whether to enable Path MTU Discovery on this tunnel.")
@@ -228,7 +209,6 @@
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_IGNORE_AUTO_ROUTES N_("When \"method\" is set to \"auto\" and this property to TRUE, automatically configured routes are ignored and only routes specified in the \"routes\" property, if any, are used.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_MAY_FAIL N_("If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_METHOD N_("IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support \"auto\", \"manual\", and \"link-local\". See the subclass-specific documentation for other values. In general, for the \"auto\" method, properties such as \"dns\" and \"routes\" specify information that is added on to the information returned from automatic configuration.  The \"ignore-auto-routes\" and \"ignore-auto-dns\" properties modify this behavior. For methods that imply no upstream network, such as \"shared\" or \"link-local\", these properties must be empty. For IPv4 method \"shared\", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen.")
-#define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_NEVER_DEFAULT N_("If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_ROUTE_METRIC N_("The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_ROUTE_TABLE N_("Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager.")
@@ -250,7 +230,6 @@
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_IP6_PRIVACY N_("Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941.  If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64.  This enhances privacy, but could cause problems in some applications, on the other hand.  The permitted values are: -1: unknown, 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses). Having a per-connection setting set to \"-1\" (unknown) means fallback to global configuration \"ipv6.ip6-privacy\". If also global configuration is unspecified or set to \"-1\", fallback to read \"/proc/sys/net/ipv6/conf/default/use_tempaddr\". Note that this setting is distinct from the Stable Privacy addresses that can be enabled with the \"addr-gen-mode\" property's \"stable-privacy\" setting as another way of avoiding host tracking with IPv6 addresses.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_MAY_FAIL N_("If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_METHOD N_("IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support \"auto\", \"manual\", and \"link-local\". See the subclass-specific documentation for other values. In general, for the \"auto\" method, properties such as \"dns\" and \"routes\" specify information that is added on to the information returned from automatic configuration.  The \"ignore-auto-routes\" and \"ignore-auto-dns\" properties modify this behavior. For methods that imply no upstream network, such as \"shared\" or \"link-local\", these properties must be empty. For IPv4 method \"shared\", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen.")
-#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_NEVER_DEFAULT N_("If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_ROUTE_METRIC N_("The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_ROUTE_TABLE N_("Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager.")
@@ -261,30 +240,24 @@
 #define DESCRIBE_DOC_NM_SETTING_MACSEC_MKA_CAK_FLAGS N_("Flags indicating how to handle the \"mka-cak\" property.")
 #define DESCRIBE_DOC_NM_SETTING_MACSEC_MKA_CKN N_("The pre-shared CKN (Connectivity-association Key Name) for MACsec Key Agreement.")
 #define DESCRIBE_DOC_NM_SETTING_MACSEC_MODE N_("Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained.")
-#define DESCRIBE_DOC_NM_SETTING_MACSEC_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_MACSEC_PARENT N_("If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created.  If this property is not specified, the connection must contain an \"802-3-ethernet\" setting with a \"mac-address\" property.")
 #define DESCRIBE_DOC_NM_SETTING_MACSEC_PORT N_("The port component of the SCI (Secure Channel Identifier), between 1 and 65534.")
 #define DESCRIBE_DOC_NM_SETTING_MACSEC_SEND_SCI N_("Specifies whether the SCI (Secure Channel Identifier) is included in every packet.")
 #define DESCRIBE_DOC_NM_SETTING_MACSEC_VALIDATION N_("Specifies the validation mode for incoming frames.")
 #define DESCRIBE_DOC_NM_SETTING_MACVLAN_MODE N_("The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device.")
-#define DESCRIBE_DOC_NM_SETTING_MACVLAN_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_MACVLAN_PARENT N_("If given, specifies the parent interface name or parent connection UUID from which this MAC-VLAN interface should be created.  If this property is not specified, the connection must contain an \"802-3-ethernet\" setting with a \"mac-address\" property.")
 #define DESCRIBE_DOC_NM_SETTING_MACVLAN_PROMISCUOUS N_("Whether the interface should be put in promiscuous mode.")
 #define DESCRIBE_DOC_NM_SETTING_MACVLAN_TAP N_("Whether the interface should be a MACVTAP.")
 #define DESCRIBE_DOC_NM_SETTING_OVS_BRIDGE_FAIL_MODE N_("The bridge failure mode. One of \"secure\", \"standalone\" or empty.")
 #define DESCRIBE_DOC_NM_SETTING_OVS_BRIDGE_MCAST_SNOOPING_ENABLE N_("Enable or disable multicast snooping.")
-#define DESCRIBE_DOC_NM_SETTING_OVS_BRIDGE_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_OVS_BRIDGE_RSTP_ENABLE N_("Enable or disable RSTP.")
 #define DESCRIBE_DOC_NM_SETTING_OVS_BRIDGE_STP_ENABLE N_("Enable or disable STP.")
-#define DESCRIBE_DOC_NM_SETTING_OVS_INTERFACE_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_OVS_INTERFACE_TYPE N_("The interface type. Either \"internal\", or empty.")
-#define DESCRIBE_DOC_NM_SETTING_OVS_PATCH_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_OVS_PATCH_PEER N_("Specifies the unicast destination IP address of a remote Open vSwitch bridge port to connect to.")
 #define DESCRIBE_DOC_NM_SETTING_OVS_PORT_BOND_DOWNDELAY N_("The time port must be inactive in order to be considered down.")
 #define DESCRIBE_DOC_NM_SETTING_OVS_PORT_BOND_MODE N_("Bonding mode. One of \"active-backup\", \"balance-slb\", or \"balance-tcp\".")
 #define DESCRIBE_DOC_NM_SETTING_OVS_PORT_BOND_UPDELAY N_("The time port must be active before it starts forwarding traffic.")
 #define DESCRIBE_DOC_NM_SETTING_OVS_PORT_LACP N_("LACP mode. One of \"active\", \"off\", or \"passive\".")
-#define DESCRIBE_DOC_NM_SETTING_OVS_PORT_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_OVS_PORT_TAG N_("The VLAN tag in the range 0-4095.")
 #define DESCRIBE_DOC_NM_SETTING_OVS_PORT_VLAN_MODE N_("The VLAN mode. One of \"access\", \"native-tagged\", \"native-untagged\", \"trunk\" or unset.")
 #define DESCRIBE_DOC_NM_SETTING_PPP_BAUD N_("If non-zero, instruct pppd to set the serial port to the specified baudrate.  This value should normally be left as 0 to automatically choose the speed.")
@@ -294,7 +267,6 @@
 #define DESCRIBE_DOC_NM_SETTING_PPP_MPPE_STATEFUL N_("If TRUE, stateful MPPE is used.  See pppd documentation for more information on stateful MPPE.")
 #define DESCRIBE_DOC_NM_SETTING_PPP_MRU N_("If non-zero, instruct pppd to request that the peer send packets no larger than the specified size.  If non-zero, the MRU should be between 128 and 16384.")
 #define DESCRIBE_DOC_NM_SETTING_PPP_MTU N_("If non-zero, instruct pppd to send packets no larger than the specified size.")
-#define DESCRIBE_DOC_NM_SETTING_PPP_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_PPP_NO_VJ_COMP N_("If TRUE, Van Jacobsen TCP header compression will not be requested.")
 #define DESCRIBE_DOC_NM_SETTING_PPP_NOAUTH N_("If TRUE, do not require the other side (usually the PPP server) to authenticate itself to the client.  If FALSE, require authentication from the remote side.  In almost all cases, this should be TRUE.")
 #define DESCRIBE_DOC_NM_SETTING_PPP_NOBSDCOMP N_("If TRUE, BSD compression will not be requested.")
@@ -306,7 +278,6 @@
 #define DESCRIBE_DOC_NM_SETTING_PPP_REFUSE_PAP N_("If TRUE, the PAP authentication method will not be used.")
 #define DESCRIBE_DOC_NM_SETTING_PPP_REQUIRE_MPPE N_("If TRUE, MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session.  If either 64-bit or 128-bit MPPE is not available the session will fail.  Note that MPPE is not used on mobile broadband connections.")
 #define DESCRIBE_DOC_NM_SETTING_PPP_REQUIRE_MPPE_128 N_("If TRUE, 128-bit MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session, and the \"require-mppe\" property must also be set to TRUE.  If 128-bit MPPE is not available the session will fail.")
-#define DESCRIBE_DOC_NM_SETTING_PPPOE_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_PPPOE_PARENT N_("If given, specifies the parent interface name on which this PPPoE connection should be created.  If this property is not specified, the connection is activated on the interface specified in \"interface-name\" of NMSettingConnection.")
 #define DESCRIBE_DOC_NM_SETTING_PPPOE_PASSWORD N_("Password used to authenticate with the PPPoE service.")
 #define DESCRIBE_DOC_NM_SETTING_PPPOE_PASSWORD_FLAGS N_("Flags indicating how to handle the \"password\" property.")
@@ -314,27 +285,22 @@
 #define DESCRIBE_DOC_NM_SETTING_PPPOE_USERNAME N_("Username used to authenticate with the PPPoE service.")
 #define DESCRIBE_DOC_NM_SETTING_PROXY_BROWSER_ONLY N_("Whether the proxy configuration is for browser only.")
 #define DESCRIBE_DOC_NM_SETTING_PROXY_METHOD N_("Method for proxy configuration, Default is NM_SETTING_PROXY_METHOD_NONE (0)")
-#define DESCRIBE_DOC_NM_SETTING_PROXY_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_PROXY_PAC_SCRIPT N_("PAC script for the connection.")
 #define DESCRIBE_DOC_NM_SETTING_PROXY_PAC_URL N_("PAC URL for obtaining PAC file.")
 #define DESCRIBE_DOC_NM_SETTING_SERIAL_BAUD N_("Speed to use for communication over the serial port.  Note that this value usually has no effect for mobile broadband modems as they generally ignore speed settings and use the highest available speed.")
 #define DESCRIBE_DOC_NM_SETTING_SERIAL_BITS N_("Byte-width of the serial communication. The 8 in \"8n1\" for example.")
-#define DESCRIBE_DOC_NM_SETTING_SERIAL_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_SERIAL_PARITY N_("Parity setting of the serial port.")
 #define DESCRIBE_DOC_NM_SETTING_SERIAL_SEND_DELAY N_("Time to delay between each byte sent to the modem, in microseconds.")
 #define DESCRIBE_DOC_NM_SETTING_SERIAL_STOPBITS N_("Number of stop bits for communication on the serial port.  Either 1 or 2. The 1 in \"8n1\" for example.")
 #define DESCRIBE_DOC_NM_SETTING_SRIOV_AUTOPROBE_DRIVERS N_("Whether to autoprobe virtual functions by a compatible driver. If set to NM_TERNARY_TRUE (1), the kernel will try to bind VFs to a compatible driver and if this succeeds a new network interface will be instantiated for each VF. If set to NM_TERNARY_FALSE (0), VFs will not be claimed and no network interfaces will be created for them. When set to NM_TERNARY_DEFAULT (-1), the global default is used; in case the global default is unspecified it is assumed to be NM_TERNARY_TRUE (1).")
-#define DESCRIBE_DOC_NM_SETTING_SRIOV_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_SRIOV_TOTAL_VFS N_("The total number of virtual functions to create.")
 #define DESCRIBE_DOC_NM_SETTING_SRIOV_VFS N_("Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: \"INDEX [ATTR=VALUE[ ATTR=VALUE]...]\". for example: \"2 mac=00:11:22:33:44:55 spoof-check=true\". The \"vlans\" attribute is represented as a semicolor-separated list of VLAN descriptors, where each descriptor has the form \"ID[.PRIORITY[.PROTO]]\". PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad.")
-#define DESCRIBE_DOC_NM_SETTING_TC_CONFIG_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_TC_CONFIG_QDISCS N_("Array of TC queueing disciplines.")
 #define DESCRIBE_DOC_NM_SETTING_TC_CONFIG_TFILTERS N_("Array of TC traffic filters.")
 #define DESCRIBE_DOC_NM_SETTING_TEAM_CONFIG N_("The JSON configuration for the team network interface.  The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used.  See man teamd.conf for the format details.")
 #define DESCRIBE_DOC_NM_SETTING_TEAM_LINK_WATCHERS N_("Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-incative', 'send-always'. See teamd.conf man for more details.")
 #define DESCRIBE_DOC_NM_SETTING_TEAM_MCAST_REJOIN_COUNT N_("Corresponds to the teamd mcast_rejoin.count.")
 #define DESCRIBE_DOC_NM_SETTING_TEAM_MCAST_REJOIN_INTERVAL N_("Corresponds to the teamd mcast_rejoin.interval.")
-#define DESCRIBE_DOC_NM_SETTING_TEAM_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_TEAM_NOTIFY_PEERS_COUNT N_("Corresponds to the teamd notify_peers.count.")
 #define DESCRIBE_DOC_NM_SETTING_TEAM_NOTIFY_PEERS_INTERVAL N_("Corresponds to the teamd notify_peers.interval.")
 #define DESCRIBE_DOC_NM_SETTING_TEAM_RUNNER N_("Corresponds to the teamd runner.name. Permitted values are: \"roundrobin\", \"broadcast\", \"activebackup\", \"loadbalance\", \"lacp\", \"random\". When setting the runner, all the properties specific to the runner will be reset to the default value; all the properties specific to other runners will be set to an empty value (or if not possible to a default value).")
@@ -351,27 +317,22 @@
 #define DESCRIBE_DOC_NM_SETTING_TEAM_PORT_LACP_KEY N_("Corresponds to the teamd ports.PORTIFNAME.lacp_key.")
 #define DESCRIBE_DOC_NM_SETTING_TEAM_PORT_LACP_PRIO N_("Corresponds to the teamd ports.PORTIFNAME.lacp_prio.")
 #define DESCRIBE_DOC_NM_SETTING_TEAM_PORT_LINK_WATCHERS N_("Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-incative', 'send-always'. See teamd.conf man for more details.")
-#define DESCRIBE_DOC_NM_SETTING_TEAM_PORT_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_TEAM_PORT_PRIO N_("Corresponds to the teamd ports.PORTIFNAME.prio.")
 #define DESCRIBE_DOC_NM_SETTING_TEAM_PORT_QUEUE_ID N_("Corresponds to the teamd ports.PORTIFNAME.queue_id. When set to -1 means the parameter is skipped from the json config.")
 #define DESCRIBE_DOC_NM_SETTING_TEAM_PORT_STICKY N_("Corresponds to the teamd ports.PORTIFNAME.sticky.")
 #define DESCRIBE_DOC_NM_SETTING_TUN_GROUP N_("The group ID which will own the device. If set to NULL everyone will be able to use the device.")
 #define DESCRIBE_DOC_NM_SETTING_TUN_MODE N_("The operating mode of the virtual device. Allowed values are NM_SETTING_TUN_MODE_TUN (1) to create a layer 3 device and NM_SETTING_TUN_MODE_TAP (2) to create an Ethernet-like layer 2 one.")
 #define DESCRIBE_DOC_NM_SETTING_TUN_MULTI_QUEUE N_("If the property is set to TRUE, the interface will support multiple file descriptors (queues) to parallelize packet sending or receiving. Otherwise, the interface will only support a single queue.")
-#define DESCRIBE_DOC_NM_SETTING_TUN_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_TUN_OWNER N_("The user ID which will own the device. If set to NULL everyone will be able to use the device.")
 #define DESCRIBE_DOC_NM_SETTING_TUN_PI N_("If TRUE the interface will prepend a 4 byte header describing the physical interface to the packets.")
 #define DESCRIBE_DOC_NM_SETTING_TUN_VNET_HDR N_("If TRUE the IFF_VNET_HDR the tunnel packets will include a virtio network header.")
 #define DESCRIBE_DOC_NM_SETTING_USER_DATA N_("A dictionary of key/value pairs with user data. This data is ignored by NetworkManager and can be used at the users discretion. The keys only support a strict ascii format, but the values can be arbitrary UTF8 strings up to a certain length.")
-#define DESCRIBE_DOC_NM_SETTING_USER_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_VLAN_EGRESS_PRIORITY_MAP N_("For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p priorities.  The mapping is given in the format \"from:to\" where both \"from\" and \"to\" are unsigned integers, ie \"7:3\".")
 #define DESCRIBE_DOC_NM_SETTING_VLAN_FLAGS N_("One or more flags which control the behavior and features of the VLAN interface.  Flags include NM_VLAN_FLAG_REORDER_HEADERS (0x1) (reordering of output packet headers), NM_VLAN_FLAG_GVRP (0x2) (use of the GVRP protocol), and NM_VLAN_FLAG_LOOSE_BINDING (0x4) (loose binding of the interface to its master device's operating state). NM_VLAN_FLAG_MVRP (0x8) (use of the MVRP protocol). The default value of this property is NM_VLAN_FLAG_REORDER_HEADERS, but it used to be 0. To preserve backward compatibility, the default-value in the D-Bus API continues to be 0 and a missing property on D-Bus is still considered as 0.")
 #define DESCRIBE_DOC_NM_SETTING_VLAN_ID N_("The VLAN identifier that the interface created by this connection should be assigned. The valid range is from 0 to 4094, without the reserved id 4095.")
 #define DESCRIBE_DOC_NM_SETTING_VLAN_INGRESS_PRIORITY_MAP N_("For incoming packets, a list of mappings from 802.1p priorities to Linux SKB priorities.  The mapping is given in the format \"from:to\" where both \"from\" and \"to\" are unsigned integers, ie \"7:3\".")
-#define DESCRIBE_DOC_NM_SETTING_VLAN_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_VLAN_PARENT N_("If given, specifies the parent interface name or parent connection UUID from which this VLAN interface should be created.  If this property is not specified, the connection must contain an \"802-3-ethernet\" setting with a \"mac-address\" property.")
 #define DESCRIBE_DOC_NM_SETTING_VPN_DATA N_("Dictionary of key/value pairs of VPN plugin specific data.  Both keys and values must be strings.")
-#define DESCRIBE_DOC_NM_SETTING_VPN_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_VPN_PERSISTENT N_("If the VPN service supports persistence, and this property is TRUE, the VPN will attempt to stay connected across link changes and outages, until explicitly disconnected.")
 #define DESCRIBE_DOC_NM_SETTING_VPN_SECRETS N_("Dictionary of key/value pairs of VPN plugin specific secrets like passwords or private keys.  Both keys and values must be strings.")
 #define DESCRIBE_DOC_NM_SETTING_VPN_SERVICE_TYPE N_("D-Bus service name of the VPN plugin that this setting uses to connect to its network.  i.e. org.freedesktop.NetworkManager.vpnc for the vpnc plugin.")
@@ -385,7 +346,6 @@
 #define DESCRIBE_DOC_NM_SETTING_VXLAN_LEARNING N_("Specifies whether unknown source link layer addresses and IP addresses are entered into the VXLAN device forwarding database.")
 #define DESCRIBE_DOC_NM_SETTING_VXLAN_LIMIT N_("Specifies the maximum number of FDB entries. A value of zero means that the kernel will store unlimited entries.")
 #define DESCRIBE_DOC_NM_SETTING_VXLAN_LOCAL N_("If given, specifies the source IP address to use in outgoing packets.")
-#define DESCRIBE_DOC_NM_SETTING_VXLAN_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_VXLAN_PARENT N_("If given, specifies the parent interface name or parent connection UUID.")
 #define DESCRIBE_DOC_NM_SETTING_VXLAN_PROXY N_("Specifies whether ARP proxy is turned on.")
 #define DESCRIBE_DOC_NM_SETTING_VXLAN_REMOTE N_("Specifies the unicast destination IP address to use in outgoing packets when the destination link layer address is not known in the VXLAN device forwarding database, or the multicast IP address to join.")
@@ -395,9 +355,7 @@
 #define DESCRIBE_DOC_NM_SETTING_VXLAN_TOS N_("Specifies the TOS value to use in outgoing packets.")
 #define DESCRIBE_DOC_NM_SETTING_VXLAN_TTL N_("Specifies the time-to-live value to use in outgoing packets.")
 #define DESCRIBE_DOC_NM_SETTING_WIMAX_MAC_ADDRESS N_("If specified, this connection will only apply to the WiMAX device whose MAC address matches. This property does not change the MAC address of the device (known as MAC spoofing). Deprecated: 1")
-#define DESCRIBE_DOC_NM_SETTING_WIMAX_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_WIMAX_NETWORK_NAME N_("Network Service Provider (NSP) name of the WiMAX network this connection should use. Deprecated: 1")
 #define DESCRIBE_DOC_NM_SETTING_WPAN_MAC_ADDRESS N_("If specified, this connection will only apply to the IEEE 802.15.4 (WPAN) MAC layer device whose permanent MAC address matches.")
-#define DESCRIBE_DOC_NM_SETTING_WPAN_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_WPAN_PAN_ID N_("IEEE 802.15.4 Personal Area Network (PAN) identifier.")
 #define DESCRIBE_DOC_NM_SETTING_WPAN_SHORT_ADDRESS N_("Short IEEE 802.15.4 address to be used within a restricted environment.")
diff --git a/libnm/generate-setting-docs.py b/libnm/generate-setting-docs.py
index bb9fa6a133..bf069cbd58 100755
--- a/libnm/generate-setting-docs.py
+++ b/libnm/generate-setting-docs.py
@@ -228,7 +228,7 @@ for settingxml in settings:
         raise Exception("%s needs a gtk-doc block with one-line description" % setting.props.name)
     outfile.write("  <setting name=\"%s\" description=\"%s\" name_upper=\"%s\" >\n" % (setting.props.name, class_desc, get_setting_name_define (settingxml)))
 
-    setting_properties = { prop.name: prop for prop in GObject.list_properties(setting) }
+    setting_properties = { prop.name: prop for prop in GObject.list_properties(setting) if prop.name != 'name' }
     if args.overrides is None:
         setting_overrides = {}
     else: