all: fix minor typos in settings docs

https://bugzilla.gnome.org/show_bug.cgi?id=784440

9 files changed, 20 insertions, 20 deletions

diff --git a/clients/common/settings-docs.c.in b/clients/common/settings-docs.c.in
index eb9eaf1a9e..0f661d7861 100644
--- a/clients/common/settings-docs.c.in
+++ b/clients/common/settings-docs.c.in
@@ -40,7 +40,7 @@
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_SECURITY_WEP_KEY2 N_("Index 2 WEP key.  This WEP index is not used by most networks.  See the \"wep-key-type\" property for a description of how this key is interpreted.")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_SECURITY_WEP_KEY3 N_("Index 3 WEP key.  This WEP index is not used by most networks.  See the \"wep-key-type\" property for a description of how this key is interpreted.")
 #define DESCRIBE_DOC_NM_SETTING_WIRELESS_SECURITY_WEP_TX_KEYIDX N_("When static WEP is used (ie, key-mgmt = \"none\") and a non-default WEP key index is used by the AP, put that WEP key index here.  Valid values are 0 (default key) through 3.  Note that some consumer access points (like the Linksys WRT54G) number the keys 1 - 4.")
-#define DESCRIBE_DOC_NM_SETTING_WIRELESS_SECURITY_WPS_METHOD N_("Flags indicating which mode of WPS is to be used if any. There's little point in changing the default setting as NetworkManager will automatically determine whether it's feasible to start WPS enrollment from the Access Point capabilities. WPS can by disabled by setting this property to a value of 1.")
+#define DESCRIBE_DOC_NM_SETTING_WIRELESS_SECURITY_WPS_METHOD N_("Flags indicating which mode of WPS is to be used if any. There's little point in changing the default setting as NetworkManager will automatically determine whether it's feasible to start WPS enrollment from the Access Point capabilities. WPS can be disabled by setting this property to a value of 1.")
 #define DESCRIBE_DOC_NM_SETTING_802_1X_ALTSUBJECT_MATCHES N_("List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed.")
 #define DESCRIBE_DOC_NM_SETTING_802_1X_ANONYMOUS_IDENTITY N_("Anonymous identity string for EAP authentication methods.  Used as the unencrypted identity with EAP types that support different tunneled identity like EAP-TTLS.")
 #define DESCRIBE_DOC_NM_SETTING_802_1X_AUTH_TIMEOUT N_("A timeout for the authentication. Zero means the global default; if the global default is not set, the authentication timeout is 25 seconds.")
@@ -94,11 +94,11 @@
 #define DESCRIBE_DOC_NM_SETTING_WIRED_MAC_ADDRESS_BLACKLIST N_("If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list.  Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55).")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_MTU N_("If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
-#define DESCRIBE_DOC_NM_SETTING_WIRED_PORT N_("Specific port type to use if multiple the device supports multiple attachment methods.  One of \"tp\" (Twisted Pair), \"aui\" (Attachment Unit Interface), \"bnc\" (Thin Ethernet) or \"mii\" (Media Independent Interface. If the device supports only one port type, this setting is ignored.")
+#define DESCRIBE_DOC_NM_SETTING_WIRED_PORT N_("Specific port type to use if the device supports multiple attachment methods.  One of \"tp\" (Twisted Pair), \"aui\" (Attachment Unit Interface), \"bnc\" (Thin Ethernet) or \"mii\" (Media Independent Interface). If the device supports only one port type, this setting is ignored.")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_S390_NETTYPE N_("s390 network device type; one of \"qeth\", \"lcs\", or \"ctc\", representing the different types of virtual network devices available on s390 systems.")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_S390_OPTIONS N_("Dictionary of key/value pairs of s390-specific device options.  Both keys and values must be strings.  Allowed keys include \"portno\", \"layer2\", \"portname\", \"protocol\", among others.  Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_S390_SUBCHANNELS N_("Identifies specific subchannels that this network device uses for communication with z/VM or s390 host.  Like the \"mac-address\" property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels.  The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character.")
-#define DESCRIBE_DOC_NM_SETTING_WIRED_SPEED N_("Can be set to a value grater than zero only when \"auto-negotiate\" is \"off\". In that case, statically configures the device to use that specified speed. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the \"duplex\" property when non-zero. Before specifying a speed value be sure your device supports it.")
+#define DESCRIBE_DOC_NM_SETTING_WIRED_SPEED N_("Can be set to a value greater than zero only when \"auto-negotiate\" is \"off\". In that case, statically configures the device to use that specified speed. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the \"duplex\" property when non-zero. Before specifying a speed value be sure your device supports it.")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_WAKE_ON_LAN N_("The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager).")
 #define DESCRIBE_DOC_NM_SETTING_WIRED_WAKE_ON_LAN_PASSWORD N_("If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address.  If NULL, no password will be required.")
 #define DESCRIBE_DOC_NM_SETTING_ADSL_ENCAPSULATION N_("Encapsulation of ADSL connection.  Can be \"vcmux\" or \"llc\".")
@@ -123,7 +123,7 @@
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_PRIORITY N_("Sets the Spanning Tree Protocol (STP) priority for this bridge.  Lower values are \"better\"; the lowest priority bridge will be elected the root bridge.")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_STP N_("Controls whether Spanning Tree Protocol (STP) is enabled for this bridge.")
-#define DESCRIBE_DOC_NM_SETTING_BRIDGE_PORT_HAIRPIN_MODE N_("Enables or disabled \"hairpin mode\" for the port, which allows frames to be sent back out through the port the frame was received on.")
+#define DESCRIBE_DOC_NM_SETTING_BRIDGE_PORT_HAIRPIN_MODE N_("Enables or disables \"hairpin mode\" for the port, which allows frames to be sent back out through the port the frame was received on.")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_PORT_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_PORT_PATH_COST N_("The Spanning Tree Protocol (STP) port cost for destinations via this port.")
 #define DESCRIBE_DOC_NM_SETTING_BRIDGE_PORT_PRIORITY N_("The Spanning Tree Protocol (STP) priority of this bridge port.")
@@ -161,10 +161,10 @@
 #define DESCRIBE_DOC_NM_SETTING_DCB_APP_ISCSI_FLAGS N_("Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).")
 #define DESCRIBE_DOC_NM_SETTING_DCB_APP_ISCSI_PRIORITY N_("The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for default priority. Only used when the \"app-iscsi-flags\" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.")
 #define DESCRIBE_DOC_NM_SETTING_DCB_NAME N_("The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example \"ppp\" or \"wireless\" or \"wired\".")
-#define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_BANDWIDTH N_("An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percent.")
+#define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_BANDWIDTH N_("An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents.")
 #define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_FLOW_CONTROL N_("An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause.")
 #define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_FLOW_CONTROL_FLAGS N_("Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).")
-#define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_GROUP_BANDWIDTH N_("An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percent.")
+#define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_GROUP_BANDWIDTH N_("An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents.")
 #define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_GROUP_FLAGS N_("Specifies the NMSettingDcbFlags for DCB Priority Groups.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).")
 #define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_GROUP_ID N_("An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group.")
 #define DESCRIBE_DOC_NM_SETTING_DCB_PRIORITY_STRICT_BANDWIDTH N_("An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group.")
@@ -183,7 +183,7 @@
 #define DESCRIBE_DOC_NM_SETTING_GSM_PIN N_("If the SIM is locked with a PIN it must be unlocked before any other operations are requested.  Specify the PIN here to allow operation of the device.")
 #define DESCRIBE_DOC_NM_SETTING_GSM_PIN_FLAGS N_("Flags indicating how to handle the \"pin\" property.")
 #define DESCRIBE_DOC_NM_SETTING_GSM_SIM_ID N_("The SIM card unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will apply to any device also allowed by \"device-id\" which contains a SIM card matching the given identifier.")
-#define DESCRIBE_DOC_NM_SETTING_GSM_SIM_OPERATOR_ID N_("A MCC/MNC string like \"310260\" or \"21601\" identifying the specific mobile network operator which this connection applies to.  If given, the connection will apply to any device also allowed by \"device-id\" and \"sim-id\" which contains a SIM card provisioined by the given operator.")
+#define DESCRIBE_DOC_NM_SETTING_GSM_SIM_OPERATOR_ID N_("A MCC/MNC string like \"310260\" or \"21601\" identifying the specific mobile network operator which this connection applies to.  If given, the connection will apply to any device also allowed by \"device-id\" and \"sim-id\" which contains a SIM card provisioned by the given operator.")
 #define DESCRIBE_DOC_NM_SETTING_GSM_USERNAME N_("The username used to authenticate with the network, if required.  Many providers do not require a username, or accept any username.  But if a username is required, it is specified here.")
 #define DESCRIBE_DOC_NM_SETTING_INFINIBAND_MAC_ADDRESS N_("If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).")
 #define DESCRIBE_DOC_NM_SETTING_INFINIBAND_MTU N_("If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.")
diff --git a/libnm-core/nm-setting-bridge-port.c b/libnm-core/nm-setting-bridge-port.c
index 9a90da1cd9..3fc0e87343 100644
--- a/libnm-core/nm-setting-bridge-port.c
+++ b/libnm-core/nm-setting-bridge-port.c
@@ -273,7 +273,7 @@ nm_setting_bridge_port_class_init (NMSettingBridgePortClass *setting_class)
 	/**
 	 * NMSettingBridgePort:hairpin-mode:
 	 *
-	 * Enables or disabled "hairpin mode" for the port, which allows frames to
+	 * Enables or disables "hairpin mode" for the port, which allows frames to
 	 * be sent back out through the port the frame was received on.
 	 **/
 	/* ---ifcfg-rh---
diff --git a/libnm-core/nm-setting-dcb.c b/libnm-core/nm-setting-dcb.c
index 7c9a0c7508..24d461a11c 100644
--- a/libnm-core/nm-setting-dcb.c
+++ b/libnm-core/nm-setting-dcb.c
@@ -1182,7 +1182,7 @@ nm_setting_dcb_class_init (NMSettingDcbClass *setting_class)
 	 * An array of 8 uint values, where the array index corresponds to the
 	 * Priority Group ID (0 - 7) and the value indicates the percentage of link
 	 * bandwidth allocated to that group.  Allowed values are 0 - 100, and the
-	 * sum of all values must total 100 percent.
+	 * sum of all values must total 100 percents.
 	 *
 	 * Element-type: guint
 	 **/
@@ -1211,7 +1211,7 @@ nm_setting_dcb_class_init (NMSettingDcbClass *setting_class)
 	 * Priority (0 - 7) and the value indicates the percentage of bandwidth of
 	 * the priority's assigned group that the priority may use.  The sum of all
 	 * percentages for priorities which belong to the same group must total 100
-	 * percent.
+	 * percents.
 	 *
 	 * Element-type: guint
 	 **/
diff --git a/libnm-core/nm-setting-gsm.c b/libnm-core/nm-setting-gsm.c
index 1cca34017d..3011d91783 100644
--- a/libnm-core/nm-setting-gsm.c
+++ b/libnm-core/nm-setting-gsm.c
@@ -793,7 +793,7 @@ nm_setting_gsm_class_init (NMSettingGsmClass *setting_class)
 	 * mobile network operator which this connection applies to.  If given,
 	 * the connection will apply to any device also allowed by
 	 * #NMSettingGsm:device-id and #NMSettingGsm:sim-id which contains a SIM
-	 * card provisioined by the given operator.
+	 * card provisioned by the given operator.
 	 *
 	 * Since: 1.2
 	 **/
diff --git a/libnm-core/nm-setting-wired.c b/libnm-core/nm-setting-wired.c
index ee7ddf88c8..9dbae61450 100644
--- a/libnm-core/nm-setting-wired.c
+++ b/libnm-core/nm-setting-wired.c
@@ -1012,9 +1012,9 @@ nm_setting_wired_class_init (NMSettingWiredClass *setting_wired_class)
 	/**
 	 * NMSettingWired:port:
 	 *
-	 * Specific port type to use if multiple the device supports multiple
+	 * Specific port type to use if the device supports multiple
 	 * attachment methods.  One of "tp" (Twisted Pair), "aui" (Attachment Unit
-	 * Interface), "bnc" (Thin Ethernet) or "mii" (Media Independent Interface.
+	 * Interface), "bnc" (Thin Ethernet) or "mii" (Media Independent Interface).
 	 * If the device supports only one port type, this setting is ignored.
 	 **/
 	/* ---ifcfg-rh---
@@ -1033,7 +1033,7 @@ nm_setting_wired_class_init (NMSettingWiredClass *setting_wired_class)
 	/**
 	 * NMSettingWired:speed:
 	 *
-	 * Can be set to a value grater than zero only when "auto-negotiate" is "off".
+	 * Can be set to a value greater than zero only when "auto-negotiate" is "off".
 	 * In that case, statically configures the device to use that specified speed.
 	 * In Mbit/s, ie 100 == 100Mbit/s.
 	 * Must be set together with the "duplex" property when non-zero.
diff --git a/libnm-core/nm-setting-wireless-security.c b/libnm-core/nm-setting-wireless-security.c
index efe77820d4..91bcbe7a23 100644
--- a/libnm-core/nm-setting-wireless-security.c
+++ b/libnm-core/nm-setting-wireless-security.c
@@ -1843,7 +1843,7 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting
 	 * automatically determine whether it's feasible to start WPS enrollment from
 	 * the Access Point capabilities.
 	 *
-	 * WPS can by disabled by setting this property to a value of 1.
+	 * WPS can be disabled by setting this property to a value of 1.
 	 *
 	 * Since: 1.10
 	 **/
diff --git a/libnm-util/nm-setting-bridge-port.c b/libnm-util/nm-setting-bridge-port.c
index 24417059e2..41d5a6f8a8 100644
--- a/libnm-util/nm-setting-bridge-port.c
+++ b/libnm-util/nm-setting-bridge-port.c
@@ -264,7 +264,7 @@ nm_setting_bridge_port_class_init (NMSettingBridgePortClass *setting_class)
 	/**
 	 * NMSettingBridgePort:hairpin-mode:
 	 *
-	 * Enables or disabled "hairpin mode" for the port, which allows frames to
+	 * Enables or disables "hairpin mode" for the port, which allows frames to
 	 * be sent back out through the port the frame was received on.
 	 *
 	 * Since: 0.9.8
diff --git a/libnm-util/nm-setting-dcb.c b/libnm-util/nm-setting-dcb.c
index f5c3ab0be4..eaed4ff5d3 100644
--- a/libnm-util/nm-setting-dcb.c
+++ b/libnm-util/nm-setting-dcb.c
@@ -1155,7 +1155,7 @@ nm_setting_dcb_class_init (NMSettingDcbClass *setting_class)
 	 * An array of 8 uint values, where the array index corresponds to the
 	 * Priority Group ID (0 - 7) and the value indicates the percentage of link
 	 * bandwidth allocated to that group.  Allowed values are 0 - 100, and the
-	 * sum of all values must total 100 percent.
+	 * sum of all values must total 100 percents.
 	 *
 	 * Since: 0.9.10
 	 **/
@@ -1173,7 +1173,7 @@ nm_setting_dcb_class_init (NMSettingDcbClass *setting_class)
 	 * Priority (0 - 7) and the value indicates the percentage of bandwidth of
 	 * the priority's assigned group that the priority may use.  The sum of all
 	 * percentages for priorities which belong to the same group must total 100
-	 * percent.
+	 * percents.
 	 *
 	 * Since: 0.9.10
 	 **/
diff --git a/libnm-util/nm-setting-wired.c b/libnm-util/nm-setting-wired.c
index 6866d0b1a1..85ba0f5e4f 100644
--- a/libnm-util/nm-setting-wired.c
+++ b/libnm-util/nm-setting-wired.c
@@ -865,9 +865,9 @@ nm_setting_wired_class_init (NMSettingWiredClass *setting_class)
 	/**
 	 * NMSettingWired:port:
 	 *
-	 * Specific port type to use if multiple the device supports multiple
+	 * Specific port type to use if the device supports multiple
 	 * attachment methods.  One of "tp" (Twisted Pair), "aui" (Attachment Unit
-	 * Interface), "bnc" (Thin Ethernet) or "mii" (Media Independent Interface.
+	 * Interface), "bnc" (Thin Ethernet) or "mii" (Media Independent Interface).
 	 * If the device supports only one port type, this setting is ignored.
 	 **/
 	g_object_class_install_property