doc: replace "Split DNS" with "Conditional Forwarding"

Split DNS usually refers to "Split Horizon DNS" whereas "Conditional
Forwarding" is specifically for what the documentation describes.

[thaller@redhat.com: rewrote commit message]

https://gitlab.freedesktop.org/NetworkManager/NetworkManager/merge_requests/143

3 files changed, 7 insertions, 7 deletions

diff --git a/clients/common/settings-docs.h.in b/clients/common/settings-docs.h.in
index 811f2f16d6..8e6ca9db29 100644
--- a/clients/common/settings-docs.h.in
+++ b/clients/common/settings-docs.h.in
@@ -208,7 +208,7 @@
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DHCP_TIMEOUT N_("A timeout for a DHCP transaction in seconds.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DNS N_("Array of IP addresses of DNS servers.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DNS_OPTIONS N_("Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties.")
-#define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DNS_PRIORITY N_("DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.")
+#define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DNS_PRIORITY N_("DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DNS_SEARCH N_("Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_GATEWAY N_("The gateway associated with this configuration. This is only meaningful if \"addresses\" is also set.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_IGNORE_AUTO_DNS N_("When \"method\" is set to \"auto\" and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the \"dns\" and \"dns-search\" properties, if any, are used.")
@@ -228,7 +228,7 @@
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DHCP_TIMEOUT N_("A timeout for a DHCP transaction in seconds.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DNS N_("Array of IP addresses of DNS servers.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DNS_OPTIONS N_("Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties.")
-#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DNS_PRIORITY N_("DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.")
+#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DNS_PRIORITY N_("DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DNS_SEARCH N_("Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_GATEWAY N_("The gateway associated with this configuration. This is only meaningful if \"addresses\" is also set.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_IGNORE_AUTO_DNS N_("When \"method\" is set to \"auto\" and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the \"dns\" and \"dns-search\" properties, if any, are used.")
diff --git a/libnm-core/nm-setting-ip-config.c b/libnm-core/nm-setting-ip-config.c
index d0b4ab1e4c..595d8fb23d 100644
--- a/libnm-core/nm-setting-ip-config.c
+++ b/libnm-core/nm-setting-ip-config.c
@@ -5468,7 +5468,7 @@ nm_setting_ip_config_class_init (NMSettingIPConfigClass *klass)
 	 * so in presence of at least a negative priority, only DNS servers from
 	 * connections with the lowest priority value will be used.
 	 *
-	 * When using a DNS resolver that supports split-DNS as dns=dnsmasq or
+	 * When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or
 	 * dns=systemd-resolved, each connection is used to query domains in its
 	 * search list.  Queries for domains not present in any search list are
 	 * routed through connections having the '~.' special wildcard domain, which
diff --git a/man/NetworkManager.conf.xml b/man/NetworkManager.conf.xml
index 289342473a..fc02af4fa5 100644
--- a/man/NetworkManager.conf.xml
+++ b/man/NetworkManager.conf.xml
@@ -328,8 +328,8 @@ no-auto-default=*
         <filename>/etc/resolv.conf</filename> to reflect the nameservers
         provided by currently active connections.</para>
         <para><literal>dnsmasq</literal>: NetworkManager will run
-        dnsmasq as a local caching nameserver, using a "split DNS"
-        configuration if you are connected to a VPN, and then update
+        dnsmasq as a local caching nameserver, using "Conditional Forwarding"
+        if you are connected to a VPN, and then update
         <filename>resolv.conf</filename> to point to the local
         nameserver. It is possible to pass custom options to the
         dnsmasq instance by adding them to files in the
@@ -343,8 +343,8 @@ no-auto-default=*
         <para><literal>systemd-resolved</literal>: NetworkManager will
         push the DNS configuration to systemd-resolved</para>
         <para><literal>unbound</literal>: NetworkManager will talk
-        to unbound and dnssec-triggerd, providing a "split DNS"
-        configuration with DNSSEC support. <filename>/etc/resolv.conf</filename>
+        to unbound and dnssec-triggerd, using "Conditional Forwarding"
+        with DNSSEC support. <filename>/etc/resolv.conf</filename>
         will be managed by dnssec-trigger daemon.</para>
         <para><literal>none</literal>: NetworkManager will not
         modify resolv.conf. This implies