diff options
Diffstat (limited to 'clients/common/settings-docs.h.in')
| -rw-r--r-- | clients/common/settings-docs.h.in | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/clients/common/settings-docs.h.in b/clients/common/settings-docs.h.in index a1b9784af1..87fb0e548c 100644 --- a/clients/common/settings-docs.h.in +++ b/clients/common/settings-docs.h.in @@ -65,8 +65,8 @@ #define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE1_PEAPLABEL N_("Forces use of the new PEAP label during key derivation. Some RADIUS servers may require forcing the new PEAP label to interoperate with PEAPv1. Set to \"1\" to force use of the new PEAP label. See the wpa_supplicant documentation for more details.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE1_PEAPVER N_("Forces which PEAP version is used when PEAP is set as the EAP method in the \"eap\" property. When unset, the version reported by the server will be used. Sometimes when using older RADIUS servers, it is necessary to force the client to use a particular PEAP version. To do so, this property may be set to \"0\" or \"1\" to force that specific PEAP version.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_ALTSUBJECT_MATCHES N_("List of strings to be matched against the altSubjectName of the certificate presented by the authentication server during the inner \"phase 2\" authentication. If the list is empty, no verification of the server certificate's altSubjectName is performed.") -#define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_AUTH N_("Specifies the allowed \"phase 2\" inner non-EAP authentication method when an EAP method that uses an inner TLS tunnel is specified in the \"eap\" property. Recognized non-EAP \"phase 2\" methods are \"pap\", \"chap\", \"mschap\", \"mschapv2\", \"gtc\", \"otp\", \"md5\", and \"tls\". Each \"phase 2\" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.") -#define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_AUTHEAP N_("Specifies the allowed \"phase 2\" inner EAP-based authentication method when an EAP method that uses an inner TLS tunnel is specified in the \"eap\" property. Recognized EAP-based \"phase 2\" methods are \"md5\", \"mschapv2\", \"otp\", \"gtc\", and \"tls\". Each \"phase 2\" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.") +#define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_AUTH N_("Specifies the allowed \"phase 2\" inner non-EAP authentication methods when an EAP method that uses an inner TLS tunnel is specified in the \"eap\" property. Recognized non-EAP \"phase 2\" methods are \"pap\", \"chap\", \"mschap\", \"mschapv2\", \"gtc\", \"otp\", \"md5\", and \"tls\". Each \"phase 2\" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.") +#define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_AUTHEAP N_("Specifies the allowed \"phase 2\" inner EAP-based authentication methods when an EAP method that uses an inner TLS tunnel is specified in the \"eap\" property. Recognized EAP-based \"phase 2\" methods are \"md5\", \"mschapv2\", \"otp\", \"gtc\", and \"tls\". Each \"phase 2\" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_CA_CERT N_("Contains the \"phase 2\" CA certificate if used by the EAP method specified in the \"phase2-auth\" or \"phase2-autheap\" properties. Certificate data is specified using a \"scheme\"; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string \"file://\" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_CA_CERT_PASSWORD N_("The password used to access the \"phase2\" CA certificate stored in \"phase2-ca-cert\" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_CA_CERT_PASSWORD_FLAGS N_("Flags indicating how to handle the \"phase2-ca-cert-password\" property.") @@ -155,6 +155,7 @@ #define DESCRIBE_DOC_NM_SETTING_CONNECTION_UUID N_("A universally unique identifier for the connection, for example generated with libuuid. It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network. For example, it should not be changed when the \"id\" property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or \"type\" property changes. The UUID must be in the format \"2815492f-7e56-435e-b2e9-246bd7cdc664\" (ie, contains only hexadecimal characters and \"-\").") #define DESCRIBE_DOC_NM_SETTING_CONNECTION_WAIT_DEVICE_TIMEOUT N_("Timeout in milliseconds to wait for device at startup. During boot, devices may take a while to be detected by the driver. This property will cause to delay NetworkManager-wait-online.service and nm-online to give the device a chance to appear. Note that this property only works together with NMSettingConnection:interface-name to identify the device that will be waited for. The value 0 means no wait time. The default value is -1, which currently has the same meaning as no wait time.") #define DESCRIBE_DOC_NM_SETTING_CONNECTION_ZONE N_("The trust level of a the connection. Free form case-insensitive string (for example \"Home\", \"Work\", \"Public\"). NULL or unspecified zone means the connection will be placed in the default zone as defined by the firewall. When updating this property on a currently activated connection, the change takes effect immediately.") +#define DESCRIBE_DOC_NM_SETTING_CONTRAIL_VROUTER_PHYSDEV N_("The physical device name.") #define DESCRIBE_DOC_NM_SETTING_DCB_APP_FCOE_FLAGS N_("Specifies the NMSettingDcbFlags for the DCB FCoE application. Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).") #define DESCRIBE_DOC_NM_SETTING_DCB_APP_FCOE_MODE N_("The FCoE controller mode; either \"fabric\" (default) or \"vn2vn\".") #define DESCRIBE_DOC_NM_SETTING_DCB_APP_FCOE_PRIORITY N_("The highest User Priority (0 - 7) which FCoE frames should use, or -1 for default priority. Only used when the \"app-fcoe-flags\" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.") |