diff options
Diffstat (limited to 'src/devices/bluetooth/nm-bluez-manager.c')
-rw-r--r-- | src/devices/bluetooth/nm-bluez-manager.c | 90 |
1 files changed, 45 insertions, 45 deletions
diff --git a/src/devices/bluetooth/nm-bluez-manager.c b/src/devices/bluetooth/nm-bluez-manager.c index d79c457e8d..ccfee7438c 100644 --- a/src/devices/bluetooth/nm-bluez-manager.c +++ b/src/devices/bluetooth/nm-bluez-manager.c @@ -73,9 +73,9 @@ typedef struct { NMBluezManager *self; /* Fields name with "d_" prefix are purely cached values from BlueZ's - * ObjectManager D-Bus interface. There is no logic whatsoever about - * them. - */ + * ObjectManager D-Bus interface. There is no logic whatsoever about + * them. + */ CList process_change_lst; @@ -133,7 +133,7 @@ typedef struct { bool x_device_panu_connection_allow_create : 1; /* flag to remember last time when we checked wether the object - * was a suitable adapter that is usable to a device. */ + * was a suitable adapter that is usable to a device. */ bool was_usable_adapter_for_device_before : 1; char _object_path_intern[]; @@ -259,12 +259,12 @@ static void _dbus_call_complete_cb_nop(GObject *source_object, GAsyncResult *res, gpointer user_data) { /* we don't do anything at all. The only reason to register this - * callback is so that GDBusConnection keeps the cancellable alive - * long enough until the call completes. - * - * Note that this cancellable in turn is registered via - * nm_shutdown_wait_obj_register_*(), to block shutdown until - * we are done. */ + * callback is so that GDBusConnection keeps the cancellable alive + * long enough until the call completes. + * + * Note that this cancellable in turn is registered via + * nm_shutdown_wait_obj_register_*(), to block shutdown until + * we are done. */ } /*****************************************************************************/ @@ -693,7 +693,7 @@ _bzobjs_device_is_usable(const BzDBusObj *bzobj, usable_nap = TRUE; else if (bzobj->x_device_panu_connection_allow_create) { /* We didn't yet try to create a connection. Presume we are going to create - * it when the time comes... */ + * it when the time comes... */ usable_nap = TRUE; create_panu_connection = TRUE; } @@ -704,8 +704,8 @@ _bzobjs_device_is_usable(const BzDBusObj *bzobj, && nm_device_get_state(NM_DEVICE(bzobj->x_device.device_bt)) > NM_DEVICE_STATE_DISCONNECTED) { /* The device is still activated... the absence of a profile does not - * render it unusable (yet). But since there is no more profile, the - * device is probably about to disconnect. */ + * render it unusable (yet). But since there is no more profile, the + * device is probably about to disconnect. */ } else goto out_unusable; } @@ -732,9 +732,9 @@ _bzobjs_device_is_connected(const BzDBusObj *bzobj) return TRUE; if (bzobj->x_device.connect_dun_context) { /* As long as we have a dun-context, we consider it connected. - * - * We require NMDeviceBt to try to connect to the modem, and if that fails, - * it will disconnect. */ + * + * We require NMDeviceBt to try to connect to the modem, and if that fails, + * it will disconnect. */ return TRUE; } return FALSE; @@ -1128,8 +1128,8 @@ _network_server_vt_register_bridge(const NMBtVTableNetworkServer *vtable, bzobj = _network_server_find_available(priv, addr, NULL); if (!bzobj) { /* The device checked that a network server is available, before - * starting the activation, but for some reason it no longer is. - * Indicate that the activation should not proceed. */ + * starting the activation, but for some reason it no longer is. + * Indicate that the activation should not proceed. */ if (addr) { nm_utils_error_set(error, NM_UTILS_ERROR_UNKNOWN, @@ -1424,14 +1424,14 @@ _device_process_change(BzDBusObj *bzobj) && NM_FLAGS_HAS(bzobj->d_device_capabilities, NM_BT_CAPABILITY_NAP) && _conn_track_find_head(self, NM_BT_CAPABILITY_NAP, bzobj->d_device.address)) { /* We have a useable device and also a panu-connection. We block future attemps - * to generate a connection. */ + * to generate a connection. */ bzobj->x_device_panu_connection_allow_create = FALSE; } if (bzobj->x_device.panu_connection) { if (!NM_FLAGS_HAS(nm_settings_connection_get_flags(bzobj->x_device.panu_connection), NM_SETTINGS_CONNECTION_INT_FLAGS_NM_GENERATED)) { /* the connection that we generated earlier still exists, but it's not longer the same - * as it was when we created it. Forget about it, so that we don't delete the profile later... */ + * as it was when we created it. Forget about it, so that we don't delete the profile later... */ bzobj->x_device.panu_connection = NULL; } else { if (!device_is_usable @@ -1604,11 +1604,11 @@ _dbus_process_changes(NMBluezManager *self, BzDBusObj *bzobj, const char *log_re adapter_is_usable_for_device = _bzobjs_adapter_is_usable_for_device(bzobj); if (adapter_is_usable_for_device != bzobj->was_usable_adapter_for_device_before) { /* this function does not modify bzobj in any other cases except here. - * Usually changes are processed delayed, in the idle handler. - * - * But the bzobj->was_usable_adapter_for_device_before only exists to know whether - * we need to re-check device availability. It is correct to set the flag - * here, right before we checked. */ + * Usually changes are processed delayed, in the idle handler. + * + * But the bzobj->was_usable_adapter_for_device_before only exists to know whether + * we need to re-check device availability. It is correct to set the flag + * here, right before we checked. */ bzobj->was_usable_adapter_for_device_before = adapter_is_usable_for_device; recheck_devices_for_adapter = TRUE; changes = TRUE; @@ -1634,7 +1634,7 @@ _dbus_process_changes(NMBluezManager *self, BzDBusObj *bzobj, const char *log_re BzDBusObj * bzobj2; /* we got a change to the availability of an adapter. We might need to recheck - * all devices that use this adapter... */ + * all devices that use this adapter... */ g_hash_table_iter_init(&iter, priv->bzobjs); while (g_hash_table_iter_next(&iter, (gpointer *) &bzobj2, NULL)) { if (bzobj2 == bzobj) @@ -2432,11 +2432,11 @@ _connect_returned(NMBluezManager * self, device_name); /* we already have another over-all timer running. But after we connected the device, - * we still need to wait for bluez to acknowledge the connected state (via D-Bus, for NAP). - * For DUN profiles we likely are already fully connected by now. - * - * Anyway, schedule another timeout that is possibly shorter than the overall, original - * timeout. Now this should go down fast. */ + * we still need to wait for bluez to acknowledge the connected state (via D-Bus, for NAP). + * For DUN profiles we likely are already fully connected by now. + * + * Anyway, schedule another timeout that is possibly shorter than the overall, original + * timeout. Now this should go down fast. */ bzobj->x_device.c_req_data->timeout_wait_connect_id = g_timeout_add(5000, _connect_timeout_wait_connected_cb, bzobj), bzobj->x_device.c_req_data->device_name = g_strdup(device_name); @@ -2471,11 +2471,11 @@ _connect_dun_step2_cb(NMBluez5DunContext *context, if (rfcomm_dev) { /* We want to early notify about the rfcomm path. That is because we might still delay - * to signal full activation longer (asynchronously). But the earliest time the callback - * is invoked with the rfcomm path, we just created the device synchronously. - * - * By already notifying the caller about the path early, it avoids a race where ModemManager - * would find the modem before the bluetooth code considers the profile fully activated. */ + * to signal full activation longer (asynchronously). But the earliest time the callback + * is invoked with the rfcomm path, we just created the device synchronously. + * + * By already notifying the caller about the path early, it avoids a race where ModemManager + * would find the modem before the bluetooth code considers the profile fully activated. */ nm_assert(!error); nm_assert(bzobj->x_device.c_req_data); @@ -2489,7 +2489,7 @@ _connect_dun_step2_cb(NMBluez5DunContext *context, if (!context) { /* No context set. This means, we just got notified about the rfcomm path and need to wait - * longer, for the next callback. */ + * longer, for the next callback. */ return; } } @@ -2618,12 +2618,12 @@ _connect_disconnect(NMBluezManager *self, BzDBusObj *bzobj, const char *reason) if (bt_type == NM_BT_CAPABILITY_DUN) { /* For DUN devices, we also called org.bluez.Device1.Connect() (because in order - * for nm_bluez5_dun_connect() to succeed, we need to be already connected *why??). - * - * But upon disconnect we don't call Disconnect() because we don't know whether somebody - * else also uses the bluetooth device for other purposes. During disconnect we only - * terminate the DUN connection, but don't disconnect entirely. I think that's the - * best we can do. */ + * for nm_bluez5_dun_connect() to succeed, we need to be already connected *why??). + * + * But upon disconnect we don't call Disconnect() because we don't know whether somebody + * else also uses the bluetooth device for other purposes. During disconnect we only + * terminate the DUN connection, but don't disconnect entirely. I think that's the + * best we can do. */ #if WITH_BLUEZ5_DUN nm_clear_pointer(&bzobj->x_device.connect_dun_context, nm_bluez5_dun_disconnect); #else @@ -2858,8 +2858,8 @@ dispose(GObject *object) NMBluezManagerPrivate *priv = NM_BLUEZ_MANAGER_GET_PRIVATE(self); /* FIXME(shutdown): we need a nm_device_factory_stop() hook to first unregister all - * BzDBusObj instances and do necessary cleanup actions (like disconnecting devices - * or deleting panu_connection). */ + * BzDBusObj instances and do necessary cleanup actions (like disconnecting devices + * or deleting panu_connection). */ nm_assert(c_list_is_empty(&priv->network_server_lst_head)); nm_assert(c_list_is_empty(&priv->process_change_lst_head)); |