# Networkmanageri tõlge eesti keelde.
# Estonian translation of Networkmanager.
#
# Copyright (C) 2006 Free Software Foundation, Inc.
# Copyright (C) 2007 The GNOME Project
# This file is distributed under the same license as the Networkmanager package.
#
# Priit Laes <amd@store20.com>, 2006, 2007.
# Ivar Smolin <okul at linux.ee> 2006, 2007.
# Mattias Põldaru <mattias@gmail.com>, 2007-2008.
# Lubomir Rintel <lkundrak@v3.sk>, 2016. #zanata
# Thomas Haller <thaller@redhat.com>, 2017. #zanata
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2019-01-08 16:44+0100\n"
"PO-Revision-Date: 2017-04-21 06:05-0400\n"
"Last-Translator: Copied by Zanata <copied-by-zanata@zanata.org>\n"
"Language-Team: Estonian <gnome-et@linux.ee>\n"
"Language: et\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: Zanata 3.9.6\n"

#: ../clients/cli/agent.c:40
#, c-format
msgid ""
"Usage: nmcli agent { COMMAND | help }\n"
"\n"
"COMMAND := { secret | polkit | all }\n"
"\n"
msgstr ""

#: ../clients/cli/agent.c:48
#, c-format
msgid ""
"Usage: nmcli agent secret { help }\n"
"\n"
"Runs nmcli as NetworkManager secret agent. When NetworkManager requires\n"
"a password it asks registered agents for it. This command keeps nmcli "
"running\n"
"and if a password is required asks the user for it.\n"
"\n"
msgstr ""

#: ../clients/cli/agent.c:58
#, c-format
msgid ""
"Usage: nmcli agent polkit { help }\n"
"\n"
"Registers nmcli as a polkit action for the user session.\n"
"When a polkit daemon requires an authorization, nmcli asks the user and "
"gives\n"
"the response back to polkit.\n"
"\n"
msgstr ""

#: ../clients/cli/agent.c:68
#, c-format
msgid ""
"Usage: nmcli agent all { help }\n"
"\n"
"Runs nmcli as both NetworkManager secret and a polkit agent.\n"
"\n"
msgstr ""

#: ../clients/cli/agent.c:157
#, c-format
msgid "nmcli successfully registered as a NetworkManager's secret agent.\n"
msgstr ""

#: ../clients/cli/agent.c:159
#, c-format
msgid "Error: secret agent initialization failed"
msgstr ""

#: ../clients/cli/agent.c:178
#, fuzzy, c-format
msgid "Error: polkit agent initialization failed: %s"
msgstr "Sertifikaadi andmete lähtestamine nurjus: %s"

#: ../clients/cli/agent.c:186
#, c-format
msgid "nmcli successfully registered as a polkit agent.\n"
msgstr ""

#: ../clients/cli/common.c:361 ../clients/cli/common.c:362
#: ../clients/cli/common.c:393 ../clients/cli/common.c:394
#: ../clients/cli/connections.c:1454
msgid "GROUP"
msgstr ""

#: ../clients/cli/common.c:621
#, c-format
msgid "Error: openconnect failed: %s\n"
msgstr ""

#: ../clients/cli/common.c:628
#, c-format
msgid "Error: openconnect failed with status %d\n"
msgstr ""

#: ../clients/cli/common.c:630
#, c-format
msgid "Error: openconnect failed with signal %d\n"
msgstr ""

#: ../clients/cli/common.c:711
#, c-format
msgid ""
"Warning: password for '%s' not given in 'passwd-file' and nmcli cannot ask "
"without '--ask' option.\n"
msgstr ""

#: ../clients/cli/common.c:1211
#, c-format
msgid "Error: Could not create NMClient object: %s."
msgstr ""

#: ../clients/cli/common.c:1231
msgid "Error: NetworkManager is not running."
msgstr ""

#: ../clients/cli/common.c:1327
#, c-format
msgid "Error: argument '%s' not understood. Try passing --help instead."
msgstr ""

#: ../clients/cli/common.c:1337
msgid "Error: missing argument. Try passing --help."
msgstr ""

#: ../clients/cli/common.c:1390
msgid "access denied"
msgstr ""

#: ../clients/cli/common.c:1398 ../clients/cli/connections.c:81
#: ../clients/cli/connections.c:90 ../clients/cli/devices.c:444
#: ../clients/cli/devices.c:536 ../clients/cli/devices.c:543
#: ../clients/cli/general.c:41 ../clients/cli/general.c:129
#: ../clients/cli/general.c:134 ../clients/common/nm-client-utils.c:260
#: ../clients/common/nm-client-utils.c:273
#: ../clients/common/nm-client-utils.c:277
#: ../clients/common/nm-client-utils.c:282
#: ../clients/common/nm-meta-setting-desc.c:1567
#: ../clients/common/nm-meta-setting-desc.c:1617
#: ../clients/common/nm-meta-setting-desc.c:2757
#: ../clients/common/nm-meta-setting-desc.c:2812
msgid "unknown"
msgstr ""

#: ../clients/cli/common.c:1399
msgid "none"
msgstr ""

#: ../clients/cli/common.c:1400
msgid "portal"
msgstr ""

#: ../clients/cli/common.c:1401
msgid "limited"
msgstr ""

#: ../clients/cli/common.c:1402
msgid "full"
msgstr ""

#. define some prompts for connection editor
#: ../clients/cli/connections.c:65
msgid "Setting name? "
msgstr ""

#: ../clients/cli/connections.c:66
msgid "Property name? "
msgstr ""

#: ../clients/cli/connections.c:67
msgid "Enter connection type: "
msgstr ""

#. define some other prompts
#: ../clients/cli/connections.c:71
msgid "Connection (name, UUID, or path): "
msgstr ""

#: ../clients/cli/connections.c:72
msgid "VPN connection (name, UUID, or path): "
msgstr ""

#: ../clients/cli/connections.c:73
msgid "Connection(s) (name, UUID, or path): "
msgstr ""

#: ../clients/cli/connections.c:74
msgid "Connection(s) (name, UUID, path or apath): "
msgstr ""

#: ../clients/cli/connections.c:82
msgid "activating"
msgstr ""

#: ../clients/cli/connections.c:83
msgid "activated"
msgstr ""

#: ../clients/cli/connections.c:84 ../clients/common/nm-client-utils.c:271
msgid "deactivating"
msgstr ""

#: ../clients/cli/connections.c:85
msgid "deactivated"
msgstr ""

#: ../clients/cli/connections.c:91
msgid "VPN connecting (prepare)"
msgstr ""

#: ../clients/cli/connections.c:92
msgid "VPN connecting (need authentication)"
msgstr ""

#: ../clients/cli/connections.c:93
msgid "VPN connecting"
msgstr ""

#: ../clients/cli/connections.c:94
msgid "VPN connecting (getting IP configuration)"
msgstr ""

#: ../clients/cli/connections.c:95
msgid "VPN connected"
msgstr ""

#: ../clients/cli/connections.c:96
msgid "VPN connection failed"
msgstr ""

#: ../clients/cli/connections.c:97
msgid "VPN disconnected"
msgstr ""

#: ../clients/cli/connections.c:518
msgid "never"
msgstr ""

#: ../clients/cli/connections.c:868
#, c-format
msgid ""
"Usage: nmcli connection { COMMAND | help }\n"
"\n"
"COMMAND := { show | up | down | add | modify | clone | edit | delete | "
"monitor | reload | load | import | export }\n"
"\n"
"  show [--active] [--order <order spec>]\n"
"  show [--active] [id | uuid | path | apath] <ID> ...\n"
"\n"
"  up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>] [passwd-file "
"<file with passwords>]\n"
"\n"
"  down [id | uuid | path | apath] <ID> ...\n"
"\n"
"  add COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- "
"([+|-]<setting>.<property> <value>)+]\n"
"\n"
"  modify [--temporary] [id | uuid | path] <ID> ([+|-]<setting>.<property> "
"<value>)+\n"
"\n"
"  clone [--temporary] [id | uuid | path ] <ID> <new name>\n"
"\n"
"  edit [id | uuid | path] <ID>\n"
"  edit [type <new_con_type>] [con-name <new_con_name>]\n"
"\n"
"  delete [id | uuid | path] <ID>\n"
"\n"
"  monitor [id | uuid | path] <ID> ...\n"
"\n"
"  reload\n"
"\n"
"  load <filename> [ <filename>... ]\n"
"\n"
"  import [--temporary] type <type> file <file to import>\n"
"\n"
"  export [id | uuid | path] <ID> [<output file>]\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:890
#, c-format
msgid ""
"Usage: nmcli connection show { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [--active] [--order <order spec>]\n"
"\n"
"List in-memory and on-disk connection profiles, some of which may also be\n"
"active if a device is using that connection profile. Without a parameter, "
"all\n"
"profiles are listed. When --active option is specified, only the active\n"
"profiles are shown. --order allows custom connection ordering (see manual "
"page).\n"
"\n"
"ARGUMENTS := [--active] [id | uuid | path | apath] <ID> ...\n"
"\n"
"Show details for specified connections. By default, both static "
"configuration\n"
"and active connection data are displayed. It is possible to filter the "
"output\n"
"using global '--fields' option. Refer to the manual page for more "
"information.\n"
"When --active option is specified, only the active profiles are taken into\n"
"account. Use global --show-secrets option to reveal associated secrets as "
"well.\n"
msgstr ""

#: ../clients/cli/connections.c:911
#, c-format
msgid ""
"Usage: nmcli connection up { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> [ifname <ifname>] [ap <BSSID>] [nsp "
"<name>] [passwd-file <file with passwords>]\n"
"\n"
"Activate a connection on a device. The profile to activate is identified by "
"its\n"
"name, UUID or D-Bus path.\n"
"\n"
"ARGUMENTS := ifname <ifname> [ap <BSSID>] [nsp <name>] [passwd-file <file "
"with passwords>]\n"
"\n"
"Activate a device with a connection. The connection profile is selected\n"
"automatically by NetworkManager.\n"
"\n"
"ifname      - specifies the device to active the connection on\n"
"ap          - specifies AP to connect to (only valid for Wi-Fi)\n"
"nsp         - specifies NSP to connect to (only valid for WiMAX)\n"
"passwd-file - file with password(s) required to activate the connection\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:932
#, c-format
msgid ""
"Usage: nmcli connection down { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path | apath] <ID> ...\n"
"\n"
"Deactivate a connection from a device (without preventing the device from\n"
"further auto-activation). The profile to deactivate is identified by its "
"name,\n"
"UUID or D-Bus path.\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:944
#, c-format
msgid ""
"Usage: nmcli connection add { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS "
"[-- ([+|-]<setting>.<property> <value>)+]\n"
"\n"
"  COMMON_OPTIONS:\n"
"                  type <type>\n"
"                  ifname <interface name> | \"*\"\n"
"                  [con-name <connection name>]\n"
"                  [autoconnect yes|no]\n"
"                  [save yes|no]\n"
"                  [master <master (ifname, or connection UUID or name)>]\n"
"                  [slave-type <master connection type>]\n"
"\n"
"  TYPE_SPECIFIC_OPTIONS:\n"
"    ethernet:     [mac <MAC address>]\n"
"                  [cloned-mac <cloned MAC address>]\n"
"                  [mtu <MTU>]\n"
"\n"
"    wifi:         ssid <SSID>\n"
"                  [mac <MAC address>]\n"
"                  [cloned-mac <cloned MAC address>]\n"
"                  [mtu <MTU>]\n"
"                  [mode infrastructure|ap|adhoc]\n"
"\n"
"    wimax:        [mac <MAC address>]\n"
"                  [nsp <NSP>]\n"
"\n"
"    pppoe:        username <PPPoE username>\n"
"                  [password <PPPoE password>]\n"
"                  [service <PPPoE service name>]\n"
"                  [mtu <MTU>]\n"
"                  [mac <MAC address>]\n"
"\n"
"    gsm:          apn <APN>\n"
"                  [user <username>]\n"
"                  [password <password>]\n"
"\n"
"    cdma:         [user <username>]\n"
"                  [password <password>]\n"
"\n"
"    infiniband:   [mac <MAC address>]\n"
"                  [mtu <MTU>]\n"
"                  [transport-mode datagram | connected]\n"
"                  [parent <ifname>]\n"
"                  [p-key <IPoIB P_Key>]\n"
"\n"
"    bluetooth:    [addr <bluetooth address>]\n"
"                  [bt-type panu|nap|dun-gsm|dun-cdma]\n"
"\n"
"    vlan:         dev <parent device (connection UUID, ifname, or MAC)>\n"
"                  id <VLAN ID>\n"
"                  [flags <VLAN flags>]\n"
"                  [ingress <ingress priority mapping>]\n"
"                  [egress <egress priority mapping>]\n"
"                  [mtu <MTU>]\n"
"\n"
"    bond:         [mode balance-rr (0) | active-backup (1) | balance-xor (2) "
"| broadcast (3) |\n"
"                        802.3ad    (4) | balance-tlb   (5) | balance-alb "
"(6)]\n"
"                  [primary <ifname>]\n"
"                  [miimon <num>]\n"
"                  [downdelay <num>]\n"
"                  [updelay <num>]\n"
"                  [arp-interval <num>]\n"
"                  [arp-ip-target <num>]\n"
"                  [lacp-rate slow (0) | fast (1)]\n"
"\n"
"    bond-slave:   master <master (ifname, or connection UUID or name)>\n"
"\n"
"    team:         [config <file>|<raw JSON data>]\n"
"\n"
"    team-slave:   master <master (ifname, or connection UUID or name)>\n"
"                  [config <file>|<raw JSON data>]\n"
"\n"
"    bridge:       [stp yes|no]\n"
"                  [priority <num>]\n"
"                  [forward-delay <2-30>]\n"
"                  [hello-time <1-10>]\n"
"                  [max-age <6-40>]\n"
"                  [ageing-time <0-1000000>]\n"
"                  [multicast-snooping yes|no]\n"
"                  [mac <MAC address>]\n"
"\n"
"    bridge-slave: master <master (ifname, or connection UUID or name)>\n"
"                  [priority <0-63>]\n"
"                  [path-cost <1-65535>]\n"
"                  [hairpin yes|no]\n"
"\n"
"    vpn:          vpn-type vpnc|openvpn|pptp|openconnect|openswan|libreswan|"
"ssh|l2tp|iodine|...\n"
"                  [user <username>]\n"
"\n"
"    olpc-mesh:    ssid <SSID>\n"
"                  [channel <1-13>]\n"
"                  [dhcp-anycast <MAC address>]\n"
"\n"
"    adsl:         username <username>\n"
"                  protocol pppoa|pppoe|ipoatm\n"
"                  [password <password>]\n"
"                  [encapsulation vcmux|llc]\n"
"\n"
"    tun:          mode tun|tap\n"
"                  [owner <UID>]\n"
"                  [group <GID>]\n"
"                  [pi yes|no]\n"
"                  [vnet-hdr yes|no]\n"
"                  [multi-queue yes|no]\n"
"\n"
"    ip-tunnel:    mode ipip|gre|sit|isatap|vti|ip6ip6|ipip6|ip6gre|vti6\n"
"                  remote <remote endpoint IP>\n"
"                  [local <local endpoint IP>]\n"
"                  [dev <parent device (ifname or connection UUID)>]\n"
"\n"
"    macsec:       dev <parent device (connection UUID, ifname, or MAC)>\n"
"                  mode <psk|eap>\n"
"                  [cak <key> ckn <key>]\n"
"                  [encrypt yes|no]\n"
"                  [port 1-65534]\n"
"\n"
"\n"
"    macvlan:      dev <parent device (connection UUID, ifname, or MAC)>\n"
"                  mode vepa|bridge|private|passthru|source\n"
"                  [tap yes|no]\n"
"\n"
"    vxlan:        id <VXLAN ID>\n"
"                  remote <IP of multicast group or remote address>\n"
"                  [local <source IP>]\n"
"                  [dev <parent device (ifname or connection UUID)>]\n"
"                  [source-port-min <0-65535>]\n"
"                  [source-port-max <0-65535>]\n"
"                  [destination-port <0-65535>]\n"
"\n"
"    wpan:         [short-addr <0x0000-0xffff>]\n"
"                  [pan-id <0x0000-0xffff>]\n"
"                  [page <default|0-31>]\n"
"                  [channel <default|0-26>]\n"
"                  [mac <MAC address>]\n"
"\n"
"    6lowpan:      dev <parent device (connection UUID, ifname, or MAC)>\n"
"    dummy:\n"
"\n"
"  SLAVE_OPTIONS:\n"
"    bridge:       [priority <0-63>]\n"
"                  [path-cost <1-65535>]\n"
"                  [hairpin yes|no]\n"
"\n"
"    team:         [config <file>|<raw JSON data>]\n"
"\n"
"  IP_OPTIONS:\n"
"                  [ip4 <IPv4 address>] [gw4 <IPv4 gateway>]\n"
"                  [ip6 <IPv6 address>] [gw6 <IPv6 gateway>]\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1068
#, c-format
msgid ""
"Usage: nmcli connection modify { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> ([+|-]<setting>.<property> <value>)+\n"
"\n"
"Modify one or more properties of the connection profile.\n"
"The profile is identified by its name, UUID or D-Bus path. For multi-valued\n"
"properties you can use optional '+' or '-' prefix to the property name.\n"
"The '+' sign allows appending items instead of overwriting the whole value.\n"
"The '-' sign allows removing selected items instead of the whole value.\n"
"\n"
"Examples:\n"
"nmcli con mod home-wifi wifi.ssid rakosnicek\n"
"nmcli con mod em1-1 ipv4.method manual ipv4.addr \"192.168.1.2/24, "
"10.10.1.5/8\"\n"
"nmcli con mod em1-1 +ipv4.dns 8.8.4.4\n"
"nmcli con mod em1-1 -ipv4.dns 1\n"
"nmcli con mod em1-1 -ipv6.addr \"abbe::cafe/56\"\n"
"nmcli con mod bond0 +bond.options mii=500\n"
"nmcli con mod bond0 -bond.options downdelay\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1091
#, c-format
msgid ""
"Usage: nmcli connection clone { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [--temporary] [id | uuid | path] <ID> <new name>\n"
"\n"
"Clone an existing connection profile. The newly created connection will be\n"
"the exact copy of the <ID>, except the uuid property (will be generated) "
"and\n"
"id (provided as <new name> argument).\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1103
#, c-format
msgid ""
"Usage: nmcli connection edit { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID>\n"
"\n"
"Edit an existing connection profile in an interactive editor.\n"
"The profile is identified by its name, UUID or D-Bus path\n"
"\n"
"ARGUMENTS := [type <new connection type>] [con-name <new connection name>]\n"
"\n"
"Add a new connection profile in an interactive editor.\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1118
#, c-format
msgid ""
"Usage: nmcli connection delete { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID>\n"
"\n"
"Delete a connection profile.\n"
"The profile is identified by its name, UUID or D-Bus path.\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1129
#, c-format
msgid ""
"Usage: nmcli connection monitor { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> ...\n"
"\n"
"Monitor connection profile activity.\n"
"This command prints a line whenever the specified connection changes.\n"
"Monitors all connection profiles in case none is specified.\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1141
#, c-format
msgid ""
"Usage: nmcli connection reload { help }\n"
"\n"
"Reload all connection files from disk.\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1149
#, c-format
msgid ""
"Usage: nmcli connection load { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <filename> [<filename>...]\n"
"\n"
"Load/reload one or more connection files from disk. Use this after manually\n"
"editing a connection file to ensure that NetworkManager is aware of its "
"latest\n"
"state.\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1161
#, c-format
msgid ""
"Usage: nmcli connection import { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [--temporary] type <type> file <file to import>\n"
"\n"
"Import an external/foreign configuration as a NetworkManager connection "
"profile.\n"
"The type of the input file is specified by type option.\n"
"Only VPN configurations are supported at the moment. The configuration\n"
"is imported by NetworkManager VPN plugins.\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1174
#, c-format
msgid ""
"Usage: nmcli connection export { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> [<output file>]\n"
"\n"
"Export a connection. Only VPN connections are supported at the moment.\n"
"The data are directed to standard output or to a file if a name is given.\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1264
#, fuzzy, c-format
msgid "Error updating secrets for %s: %s\n"
msgstr "viga lingi puhvri uuendamisel: %s"

#: ../clients/cli/connections.c:1307
msgid "Connection profile details"
msgstr ""

#: ../clients/cli/connections.c:1320 ../clients/cli/connections.c:1405
#, c-format
msgid "Error: 'connection show': %s"
msgstr ""

#: ../clients/cli/connections.c:1395
msgid "Activate connection details"
msgstr ""

#: ../clients/cli/connections.c:1503 ../clients/cli/devices.c:1453
#: ../clients/cli/devices.c:1467 ../clients/cli/devices.c:1482
#: ../clients/cli/devices.c:1540 ../clients/cli/devices.c:1642
msgid "NAME"
msgstr ""

#: ../clients/cli/connections.c:1591
#, c-format
msgid "invalid field '%s'; allowed fields: %s and %s, or %s,%s"
msgstr ""

#: ../clients/cli/connections.c:1606 ../clients/cli/connections.c:1614
#, c-format
msgid "'%s' has to be alone"
msgstr ""

#: ../clients/cli/connections.c:1876
#, c-format
msgid "incorrect string '%s' of '--order' option"
msgstr ""

#: ../clients/cli/connections.c:1901
#, c-format
msgid "incorrect item '%s' in '--order' option"
msgstr ""

#: ../clients/cli/connections.c:1939
msgid "No connection specified"
msgstr ""

#: ../clients/cli/connections.c:1950
#, c-format
msgid "%s argument is missing"
msgstr ""

#: ../clients/cli/connections.c:1968
#, c-format
msgid "unknown connection '%s'"
msgstr ""

#: ../clients/cli/connections.c:1997
msgid "'--order' argument is missing"
msgstr ""

#: ../clients/cli/connections.c:2057
msgid "NetworkManager active profiles"
msgstr ""

#: ../clients/cli/connections.c:2058
msgid "NetworkManager connection profiles"
msgstr ""

#: ../clients/cli/connections.c:2110 ../clients/cli/connections.c:2856
#: ../clients/cli/connections.c:2868 ../clients/cli/connections.c:2880
#: ../clients/cli/connections.c:3109 ../clients/cli/connections.c:8899
#: ../clients/cli/connections.c:8915 ../clients/cli/devices.c:2976
#: ../clients/cli/devices.c:2988 ../clients/cli/devices.c:3001
#: ../clients/cli/devices.c:3195 ../clients/cli/devices.c:3206
#: ../clients/cli/devices.c:3224 ../clients/cli/devices.c:3233
#: ../clients/cli/devices.c:3254 ../clients/cli/devices.c:3265
#: ../clients/cli/devices.c:3283 ../clients/cli/devices.c:3725
#: ../clients/cli/devices.c:3735 ../clients/cli/devices.c:3743
#: ../clients/cli/devices.c:3755 ../clients/cli/devices.c:3770
#: ../clients/cli/devices.c:3778 ../clients/cli/devices.c:3952
#: ../clients/cli/devices.c:3963 ../clients/cli/devices.c:4134
#, c-format
msgid "Error: %s argument is missing."
msgstr ""

#: ../clients/cli/connections.c:2138
#, c-format
msgid "Error: %s - no such connection profile."
msgstr ""

#: ../clients/cli/connections.c:2229 ../clients/cli/connections.c:2843
#: ../clients/cli/connections.c:2907 ../clients/cli/connections.c:8419
#: ../clients/cli/connections.c:8525 ../clients/cli/connections.c:9015
#: ../clients/cli/devices.c:1727 ../clients/cli/devices.c:1995
#: ../clients/cli/devices.c:2168 ../clients/cli/devices.c:2276
#: ../clients/cli/devices.c:2468 ../clients/cli/devices.c:3915
#: ../clients/cli/devices.c:4140 ../clients/cli/general.c:895
#, c-format
msgid "Error: %s."
msgstr ""

#: ../clients/cli/connections.c:2322
#, c-format
msgid "no active connection on device '%s'"
msgstr ""

#: ../clients/cli/connections.c:2330
msgid "no active connection or device"
msgstr ""

#: ../clients/cli/connections.c:2350
#, c-format
msgid "device '%s' not compatible with connection '%s': "
msgstr ""

#: ../clients/cli/connections.c:2383
#, c-format
msgid "device '%s' not compatible with connection '%s'"
msgstr ""

#: ../clients/cli/connections.c:2386
#, c-format
msgid "no device found for connection '%s'"
msgstr ""

#: ../clients/cli/connections.c:2437
#, c-format
msgid "Hint: use '%s' to get more details."
msgstr ""

#: ../clients/cli/connections.c:2455
#, c-format
msgid "Connection successfully activated (%s) (D-Bus active path: %s)\n"
msgstr ""

#: ../clients/cli/connections.c:2459 ../clients/cli/connections.c:2609
#: ../clients/cli/connections.c:6716
#, c-format
msgid "Connection successfully activated (D-Bus active path: %s)\n"
msgstr ""

#: ../clients/cli/connections.c:2466 ../clients/cli/connections.c:2588
#, c-format
msgid "Error: Connection activation failed: %s"
msgstr ""

#: ../clients/cli/connections.c:2503
#, c-format
msgid "Error: Timeout expired (%d seconds)"
msgstr ""

#: ../clients/cli/connections.c:2671
#, c-format
msgid "failed to read passwd-file '%s': %s"
msgstr ""

#: ../clients/cli/connections.c:2684
#, c-format
msgid "missing colon in 'password' entry '%s'"
msgstr ""

#: ../clients/cli/connections.c:2692
#, c-format
msgid "missing dot in 'password' entry '%s'"
msgstr ""

#: ../clients/cli/connections.c:2705
#, c-format
msgid "invalid setting name in 'password' entry '%s'"
msgstr ""

#: ../clients/cli/connections.c:2759
#, c-format
msgid "unknown device '%s'."
msgstr ""

#: ../clients/cli/connections.c:2764
msgid "neither a valid connection nor device given"
msgstr ""

#: ../clients/cli/connections.c:2890 ../clients/cli/devices.c:1686
#: ../clients/cli/devices.c:3033 ../clients/cli/devices.c:3296
#: ../clients/cli/devices.c:3969
#, c-format
msgid "Unknown parameter: %s\n"
msgstr ""

#: ../clients/cli/connections.c:2915
msgid "preparing"
msgstr ""

#: ../clients/cli/connections.c:3024
#, c-format
msgid "Connection '%s' (%s) successfully deleted.\n"
msgstr ""

#: ../clients/cli/connections.c:3040
#, c-format
msgid "Connection '%s' successfully deactivated (D-Bus active path: %s)\n"
msgstr ""

#: ../clients/cli/connections.c:3091 ../clients/cli/connections.c:8633
#: ../clients/cli/connections.c:8664 ../clients/cli/connections.c:8822
#, c-format
msgid "Error: No connection specified."
msgstr ""

#: ../clients/cli/connections.c:3121
#, c-format
msgid "Error: '%s' is not an active connection.\n"
msgstr ""

#: ../clients/cli/connections.c:3122
#, c-format
msgid "Error: not all active connections found."
msgstr ""

#: ../clients/cli/connections.c:3130
#, c-format
msgid "Error: no active connection provided."
msgstr ""

#: ../clients/cli/connections.c:3161
#, fuzzy, c-format
msgid "Connection '%s' deactivation failed: %s\n"
msgstr "Sertifikaadi andmete lähtestamine nurjus: %s"

#: ../clients/cli/connections.c:3412 ../clients/cli/connections.c:3469
#: ../clients/common/nm-client-utils.c:221
#, c-format
msgid "'%s' not among [%s]"
msgstr ""

#. We should not really come here
#: ../clients/cli/connections.c:3432 ../clients/cli/connections.c:3492
#: ../clients/common/nm-client-utils.c:289
#, c-format
msgid "Unknown error"
msgstr ""

#: ../clients/cli/connections.c:3626
#, c-format
msgid "Warning: master='%s' doesn't refer to any existing profile.\n"
msgstr ""

#: ../clients/cli/connections.c:3979
#, c-format
msgid "Error: invalid property '%s': %s."
msgstr ""

#: ../clients/cli/connections.c:3996
#, c-format
msgid "Error: failed to modify %s.%s: %s."
msgstr ""

#: ../clients/cli/connections.c:4016
#, c-format
msgid "Error: failed to remove a value from %s.%s: %s."
msgstr ""

#: ../clients/cli/connections.c:4050
#, c-format
msgid "Error: '%s' is mandatory."
msgstr ""

#: ../clients/cli/connections.c:4077
#, c-format
msgid "Error: invalid slave type; %s."
msgstr ""

#: ../clients/cli/connections.c:4085
#, c-format
msgid "Error: invalid connection type; %s."
msgstr ""

#: ../clients/cli/connections.c:4162
#, fuzzy, c-format
msgid "Error: bad connection type: %s"
msgstr "Sertifikaadi andmete lähtestamine nurjus: %s"

#: ../clients/cli/connections.c:4208
#, c-format
msgid "Error: '%s': %s"
msgstr ""

#: ../clients/cli/connections.c:4229
msgid "Error: master is required"
msgstr ""

#: ../clients/cli/connections.c:4288
#, c-format
msgid "Error: error adding bond option '%s=%s'."
msgstr ""

#: ../clients/cli/connections.c:4319
#, c-format
msgid "Error: '%s' is not a valid monitoring mode; use '%s' or '%s'.\n"
msgstr ""

#: ../clients/cli/connections.c:4350
#, c-format
msgid "Error: 'bt-type': '%s' not valid; use [%s, %s, %s (%s), %s]."
msgstr ""

#: ../clients/cli/connections.c:4599
#, c-format
msgid "Error: value for '%s' is missing."
msgstr ""

#: ../clients/cli/connections.c:4645
msgid "Error: <setting>.<property> argument is missing."
msgstr ""

#: ../clients/cli/connections.c:4668
#, c-format
msgid "Error: invalid or not allowed setting '%s': %s."
msgstr ""

#: ../clients/cli/connections.c:4714 ../clients/cli/connections.c:4730
#, c-format
msgid "Error: '%s' is ambiguous (%s.%s or %s.%s)."
msgstr ""

#: ../clients/cli/connections.c:4748
#, c-format
msgid "Error: invalid <setting>.<property> '%s'."
msgstr ""

#: ../clients/cli/connections.c:4792 ../clients/cli/connections.c:8465
#, c-format
msgid "Error: Failed to add '%s' connection: %s"
msgstr ""

#: ../clients/cli/connections.c:4810
#, c-format
msgid ""
"Warning: There is another connection with the name '%1$s'. Reference the "
"connection by its uuid '%2$s'\n"
msgid_plural ""
"Warning: There are %3$u other connections with the name '%1$s'. Reference "
"the connection by its uuid '%2$s'\n"
msgstr[0] ""
msgstr[1] ""

#: ../clients/cli/connections.c:4819
#, c-format
msgid "Connection '%s' (%s) successfully added.\n"
msgstr ""

#: ../clients/cli/connections.c:4872 ../clients/cli/connections.c:6839
#: ../clients/cli/connections.c:6840 ../clients/cli/devices.c:535
#: ../clients/cli/devices.c:542 ../clients/cli/devices.c:1207
#: ../clients/cli/general.c:136 ../clients/cli/utils.h:296
#: ../clients/common/nm-client-utils.c:279
#: ../clients/common/nm-meta-setting-desc.c:771
#: ../clients/common/nm-meta-setting-desc.c:2752
msgid "no"
msgstr ""

#: ../clients/cli/connections.c:4873 ../clients/cli/connections.c:6839
#: ../clients/cli/connections.c:6840 ../clients/cli/devices.c:534
#: ../clients/cli/devices.c:541 ../clients/cli/devices.c:1207
#: ../clients/cli/general.c:135 ../clients/cli/utils.h:296
#: ../clients/common/nm-client-utils.c:278
#: ../clients/common/nm-meta-setting-desc.c:771
#: ../clients/common/nm-meta-setting-desc.c:2749
msgid "yes"
msgstr ""

#: ../clients/cli/connections.c:4959
#, c-format
msgid ""
"You can specify this option more than once. Press <Enter> when you're done.\n"
msgstr ""

#. Ask for optional arguments.
#: ../clients/cli/connections.c:5061
#, c-format
msgid "There is %d optional setting for %s.\n"
msgid_plural "There are %d optional settings for %s.\n"
msgstr[0] ""
msgstr[1] ""

#: ../clients/cli/connections.c:5067
#, c-format
msgid "Do you want to provide it? %s"
msgid_plural "Do you want to provide them? %s"
msgstr[0] ""
msgstr[1] ""

#: ../clients/cli/connections.c:5200 ../clients/cli/utils.c:295
#, c-format
msgid "Error: value for '%s' argument is required."
msgstr ""

#: ../clients/cli/connections.c:5207
#, c-format
msgid "Error: 'save': %s."
msgstr ""

#: ../clients/cli/connections.c:5293 ../clients/cli/connections.c:5304
#, c-format
msgid "Error: '%s' argument is required."
msgstr ""

#: ../clients/cli/connections.c:6269
#, c-format
msgid "['%s' setting values]\n"
msgstr ""

#. TRANSLATORS: do not translate command names and keywords before ::
#. *              However, you should translate terms enclosed in <>.
#.
#: ../clients/cli/connections.c:6378
#, c-format
msgid ""
"---[ Main menu ]---\n"
"goto     [<setting> | <prop>]        :: go to a setting or property\n"
"remove   <setting>[.<prop>] | <prop> :: remove setting or reset property "
"value\n"
"set      [<setting>.<prop> <value>]  :: set property value\n"
"describe [<setting>.<prop>]          :: describe property\n"
"print    [all | <setting>[.<prop>]]  :: print the connection\n"
"verify   [all | fix]                 :: verify the connection\n"
"save     [persistent|temporary]      :: save the connection\n"
"activate [<ifname>] [/<ap>|<nsp>]    :: activate the connection\n"
"back                                 :: go one level up (back)\n"
"help/?   [<command>]                 :: print this help\n"
"nmcli    <conf-option> <value>       :: nmcli configuration\n"
"quit                                 :: exit nmcli\n"
msgstr ""

#: ../clients/cli/connections.c:6405
#, c-format
msgid ""
"goto <setting>[.<prop>] | <prop>  :: enter setting/property for editing\n"
"\n"
"This command enters into a setting or property for editing it.\n"
"\n"
"Examples: nmcli> goto connection\n"
"          nmcli connection> goto secondaries\n"
"          nmcli> goto ipv4.addresses\n"
msgstr ""

#: ../clients/cli/connections.c:6412
#, c-format
msgid ""
"remove <setting>[.<prop>]  :: remove setting or reset property value\n"
"\n"
"This command removes an entire setting from the connection, or if a "
"property\n"
"is given, resets that property to the default value.\n"
"\n"
"Examples: nmcli> remove wifi-sec\n"
"          nmcli> remove eth.mtu\n"
msgstr ""

#: ../clients/cli/connections.c:6419
#, c-format
msgid ""
"set [<setting>.<prop> <value>]  :: set property value\n"
"\n"
"This command sets property value.\n"
"\n"
"Example: nmcli> set con.id My connection\n"
msgstr ""

#: ../clients/cli/connections.c:6424
#, c-format
msgid ""
"describe [<setting>.<prop>]  :: describe property\n"
"\n"
"Shows property description. You can consult nm-settings(5) manual page to "
"see all NM settings and properties.\n"
msgstr ""

#: ../clients/cli/connections.c:6429
#, c-format
msgid ""
"print [all]  :: print setting or connection values\n"
"\n"
"Shows current property or the whole connection.\n"
"\n"
"Example: nmcli ipv4> print all\n"
msgstr ""

#: ../clients/cli/connections.c:6434
#, c-format
msgid ""
"verify [all | fix]  :: verify setting or connection validity\n"
"\n"
"Verifies whether the setting or connection is valid and can be saved later.\n"
"It indicates invalid values on error. Some errors may be fixed "
"automatically\n"
"by 'fix' option.\n"
"\n"
"Examples: nmcli> verify\n"
"          nmcli> verify fix\n"
"          nmcli bond> verify\n"
msgstr ""

#: ../clients/cli/connections.c:6443
#, c-format
msgid ""
"save [persistent|temporary]  :: save the connection\n"
"\n"
"Sends the connection profile to NetworkManager that either will save it\n"
"persistently, or will only keep it in memory. 'save' without an argument\n"
"means 'save persistent'.\n"
"Note that once you save the profile persistently those settings are saved\n"
"across reboot or restart. Subsequent changes can also be temporary or\n"
"persistent, but any temporary changes will not persist across reboot or\n"
"restart. If you want to fully remove the persistent connection, the "
"connection\n"
"profile must be deleted.\n"
msgstr ""

#: ../clients/cli/connections.c:6454
#, c-format
msgid ""
"activate [<ifname>] [/<ap>|<nsp>]  :: activate the connection\n"
"\n"
"Activates the connection.\n"
"\n"
"Available options:\n"
"<ifname>    - device the connection will be activated on\n"
"/<ap>|<nsp> - AP (Wi-Fi) or NSP (WiMAX) (prepend with / when <ifname> is not "
"specified)\n"
msgstr ""

#: ../clients/cli/connections.c:6461 ../clients/cli/connections.c:6619
#, c-format
msgid ""
"back  :: go to upper menu level\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:6464
#, c-format
msgid ""
"help/? [<command>]  :: help for the nmcli commands\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:6467
#, c-format
msgid ""
"nmcli [<conf-option> <value>]  :: nmcli configuration\n"
"\n"
"Configures nmcli. The following options are available:\n"
"status-line yes | no          [default: no]\n"
"save-confirmation yes | no    [default: yes]\n"
"show-secrets yes | no         [default: no]\n"
"prompt-color <color> | <0-8>  [default: 0]\n"
"%s\n"
"Examples: nmcli> nmcli status-line yes\n"
"          nmcli> nmcli save-confirmation no\n"
"          nmcli> nmcli prompt-color 3\n"
msgstr ""

#: ../clients/cli/connections.c:6489 ../clients/cli/connections.c:6625
#, c-format
msgid ""
"quit  :: exit nmcli\n"
"\n"
"This command exits nmcli. When the connection being edited is not saved, the "
"user is asked to confirm the action.\n"
msgstr ""

#: ../clients/cli/connections.c:6494 ../clients/cli/connections.c:6630
#: ../clients/cli/connections.c:7065 ../clients/cli/connections.c:8048
#, c-format
msgid "Unknown command: '%s'\n"
msgstr ""

#. TRANSLATORS: do not translate command names and keywords before ::
#. *              However, you should translate terms enclosed in <>.
#.
#: ../clients/cli/connections.c:6559
#, c-format
msgid ""
"---[ Property menu ]---\n"
"set      [<value>]               :: set new value\n"
"add      [<value>]               :: add new option to the property\n"
"change                           :: change current value\n"
"remove   [<index> | <option>]    :: delete the value\n"
"describe                         :: describe property\n"
"print    [setting | connection]  :: print property (setting/connection) "
"value(s)\n"
"back                             :: go to upper level\n"
"help/?   [<command>]             :: print this help or command description\n"
"quit                             :: exit nmcli\n"
msgstr ""

#: ../clients/cli/connections.c:6584
#, c-format
msgid ""
"set [<value>]  :: set new value\n"
"\n"
"This command sets provided <value> to this property\n"
msgstr ""

#: ../clients/cli/connections.c:6588
#, c-format
msgid ""
"add [<value>]  :: append new value to the property\n"
"\n"
"This command adds provided <value> to this property, if the property is of a "
"container type. For single-valued properties the property value is replaced "
"(same as 'set').\n"
msgstr ""

#: ../clients/cli/connections.c:6594
#, c-format
msgid ""
"change  :: change current value\n"
"\n"
"Displays current value and allows editing it.\n"
msgstr ""

#: ../clients/cli/connections.c:6598
#, c-format
msgid ""
"remove [<value>|<index>|<option name>]  :: delete the value\n"
"\n"
"Removes the property value. For single-valued properties, this sets the\n"
"property back to its default value. For container-type properties, this "
"removes\n"
"all the values of that property, or you can specify an argument to remove "
"just\n"
"a single item or option. The argument is either a value or index of the item "
"to\n"
"remove, or an option name (for properties with named options).\n"
"\n"
"Examples: nmcli ipv4.dns> remove 8.8.8.8\n"
"          nmcli ipv4.dns> remove 2\n"
"          nmcli bond.options> remove downdelay\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:6609
#, c-format
msgid ""
"describe  :: describe property\n"
"\n"
"Shows property description. You can consult nm-settings(5) manual page to "
"see all NM settings and properties.\n"
msgstr ""

#: ../clients/cli/connections.c:6614
#, c-format
msgid ""
"print [property|setting|connection]  :: print property (setting, connection) "
"value(s)\n"
"\n"
"Shows property value. Providing an argument you can also display values for "
"the whole setting or connection.\n"
msgstr ""

#: ../clients/cli/connections.c:6622
#, c-format
msgid ""
"help/? [<command>]  :: help for nmcli commands\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:6722
#, c-format
msgid "Error: Connection activation failed.\n"
msgstr ""

#: ../clients/cli/connections.c:6819
#, c-format
msgid "Error: setting '%s' is mandatory and cannot be removed.\n"
msgstr ""

#. TRANSLATORS: status line in nmcli connection editor
#: ../clients/cli/connections.c:6837
#, c-format
msgid "[ Type: %s | Name: %s | UUID: %s | Dirty: %s | Temp: %s ]\n"
msgstr ""

#: ../clients/cli/connections.c:6873
#, c-format
msgid "The connection is not saved. Do you really want to quit? %s"
msgstr ""

#: ../clients/cli/connections.c:6915
#, c-format
msgid ""
"The connection profile has been removed from another client. You may type "
"'save' in the main menu to restore it.\n"
msgstr ""

#: ../clients/cli/connections.c:6949 ../clients/cli/connections.c:7364
#: ../clients/cli/connections.c:7424
#, c-format
msgid "Allowed values for '%s' property: %s\n"
msgstr ""

#: ../clients/cli/connections.c:6953 ../clients/cli/connections.c:7368
#: ../clients/cli/connections.c:7428
#, c-format
msgid "Enter '%s' value: "
msgstr ""

#: ../clients/cli/connections.c:6968 ../clients/cli/connections.c:6990
#: ../clients/cli/connections.c:7373 ../clients/cli/connections.c:7434
#, c-format
msgid "Error: failed to set '%s' property: %s\n"
msgstr ""

#: ../clients/cli/connections.c:6983
#, c-format
msgid "Edit '%s' value: "
msgstr ""

#: ../clients/cli/connections.c:7012 ../clients/cli/settings.c:395
#, c-format
msgid "Error: %s\n"
msgstr ""

#: ../clients/cli/connections.c:7017 ../clients/cli/connections.c:7532
#: ../clients/cli/connections.c:7583
#, c-format
msgid "Error: failed to remove value of '%s': %s\n"
msgstr ""

#: ../clients/cli/connections.c:7038
#, c-format
msgid "Unknown command argument: '%s'\n"
msgstr ""

#: ../clients/cli/connections.c:7129
#, c-format
msgid "Available settings: %s\n"
msgstr ""

#: ../clients/cli/connections.c:7141
#, c-format
msgid "Error: invalid setting name; %s\n"
msgstr ""

#: ../clients/cli/connections.c:7159
#, c-format
msgid "Available properties: %s\n"
msgstr ""

#: ../clients/cli/connections.c:7167
#, c-format
msgid "Error: property %s\n"
msgstr ""

#: ../clients/cli/connections.c:7212
#, c-format
msgid ""
"Saving the connection with 'autoconnect=yes'. That might result in an "
"immediate activation of the connection.\n"
"Do you still want to save? %s"
msgstr ""

#: ../clients/cli/connections.c:7298
#, c-format
msgid "You may edit the following settings: %s\n"
msgstr ""

#: ../clients/cli/connections.c:7329
#, c-format
msgid ""
"The connection profile has been removed from another client. You may type "
"'save' to restore it.\n"
msgstr ""

#: ../clients/cli/connections.c:7377 ../clients/cli/connections.c:7628
#: ../clients/cli/connections.c:7660
#, c-format
msgid "Error: no setting selected; valid are [%s]\n"
msgstr ""

#: ../clients/cli/connections.c:7378
#, c-format
msgid "use 'goto <setting>' first, or 'set <setting>.<property>'\n"
msgstr ""

#: ../clients/cli/connections.c:7393 ../clients/cli/connections.c:7559
#: ../clients/cli/connections.c:7650
#, c-format
msgid "Error: invalid setting argument '%s'; valid are [%s]\n"
msgstr ""

#: ../clients/cli/connections.c:7402
#, c-format
msgid "Error: missing setting for '%s' property\n"
msgstr ""

#: ../clients/cli/connections.c:7409
#, c-format
msgid "Error: invalid property: %s\n"
msgstr ""

#: ../clients/cli/connections.c:7466
#, c-format
msgid "Error: unknown setting '%s'\n"
msgstr ""

#: ../clients/cli/connections.c:7491
#, c-format
msgid "You may edit the following properties: %s\n"
msgstr ""

#: ../clients/cli/connections.c:7537
#, c-format
msgid "Error: no argument given; valid are [%s]\n"
msgstr ""

#: ../clients/cli/connections.c:7556
#, c-format
msgid "Setting '%s' is not present in the connection.\n"
msgstr ""

#: ../clients/cli/connections.c:7604
#, c-format
msgid "Error: %s properties, nor it is a setting name.\n"
msgstr ""

#: ../clients/cli/connections.c:7629 ../clients/cli/connections.c:7661
#, c-format
msgid "use 'goto <setting>' first, or 'describe <setting>.<property>'\n"
msgstr ""

#: ../clients/cli/connections.c:7684
#, c-format
msgid "Error: invalid property: %s, neither a valid setting name.\n"
msgstr ""

#: ../clients/cli/connections.c:7714
#, c-format
msgid "Error: unknown setting: '%s'\n"
msgstr ""

#: ../clients/cli/connections.c:7719
#, c-format
msgid "Error: '%s' setting not present in the connection\n"
msgstr ""

#: ../clients/cli/connections.c:7750
#, c-format
msgid "Error: invalid property: %s%s\n"
msgstr ""

#: ../clients/cli/connections.c:7752
msgid ", neither a valid setting name"
msgstr ""

#: ../clients/cli/connections.c:7768
#, c-format
msgid "Invalid verify option: %s\n"
msgstr ""

#: ../clients/cli/connections.c:7776
#, c-format
msgid "Verify setting '%s': %s\n"
msgstr ""

#: ../clients/cli/connections.c:7791
#, c-format
msgid "Verify connection: %s\n"
msgstr ""

#: ../clients/cli/connections.c:7794
#, c-format
msgid "The error cannot be fixed automatically.\n"
msgstr ""

#: ../clients/cli/connections.c:7815
#, c-format
msgid "Error: invalid argument '%s'\n"
msgstr ""

#: ../clients/cli/connections.c:7867
#, c-format
msgid "Error: Failed to save '%s' (%s) connection: %s\n"
msgstr ""

#: ../clients/cli/connections.c:7873
#, c-format
msgid "Error: Timeout saving '%s' (%s) connection\n"
msgstr ""

#: ../clients/cli/connections.c:7878
#, c-format
msgid "Connection '%s' (%s) successfully saved.\n"
msgstr ""

#: ../clients/cli/connections.c:7879
#, c-format
msgid "Connection '%s' (%s) successfully updated.\n"
msgstr ""

#: ../clients/cli/connections.c:7912
#, fuzzy, c-format
msgid "Error: connection verification failed: %s\n"
msgstr "Sertifikaadi andmete lähtestamine nurjus: %s"

#: ../clients/cli/connections.c:7913
msgid "(unknown error)"
msgstr ""

#: ../clients/cli/connections.c:7914
#, c-format
msgid "You may try running 'verify fix' to fix errors.\n"
msgstr ""

#: ../clients/cli/connections.c:7936
#, c-format
msgid "Error: connection is not saved. Type 'save' first.\n"
msgstr ""

#: ../clients/cli/connections.c:7940
#, c-format
msgid "Error: connection is not valid: %s\n"
msgstr ""

#: ../clients/cli/connections.c:7950
#, c-format
msgid "Error: Cannot activate connection: %s.\n"
msgstr ""

#: ../clients/cli/connections.c:7959
#, c-format
msgid "Error: Failed to activate '%s' (%s) connection: %s\n"
msgstr ""

#: ../clients/cli/connections.c:7966
msgid "Monitoring connection activation (press any key to continue)\n"
msgstr ""

#: ../clients/cli/connections.c:8002
#, c-format
msgid "Error: status-line: %s\n"
msgstr ""

#: ../clients/cli/connections.c:8010
#, c-format
msgid "Error: save-confirmation: %s\n"
msgstr ""

#: ../clients/cli/connections.c:8018
#, c-format
msgid "Error: show-secrets: %s\n"
msgstr ""

#: ../clients/cli/connections.c:8025
#, c-format
msgid "Current nmcli configuration:\n"
msgstr ""

#: ../clients/cli/connections.c:8033
#, c-format
msgid "Invalid configuration option '%s'; allowed [%s]\n"
msgstr ""

#: ../clients/cli/connections.c:8251
#, c-format
msgid "Error: only one of 'id', 'filename', uuid, or 'path' can be provided."
msgstr ""

#: ../clients/cli/connections.c:8265 ../clients/cli/connections.c:8426
#, c-format
msgid "Error: Unknown connection '%s'."
msgstr ""

#: ../clients/cli/connections.c:8281
#, c-format
msgid "Warning: editing existing connection '%s'; 'type' argument is ignored\n"
msgstr ""

#: ../clients/cli/connections.c:8284
#, c-format
msgid ""
"Warning: editing existing connection '%s'; 'con-name' argument is ignored\n"
msgstr ""

#: ../clients/cli/connections.c:8311
#, c-format
msgid "Valid connection types: %s\n"
msgstr ""

#: ../clients/cli/connections.c:8313
#, c-format
msgid "Error: invalid connection type; %s\n"
msgstr ""

#: ../clients/cli/connections.c:8349
#, c-format
msgid "===| nmcli interactive connection editor |==="
msgstr ""

#: ../clients/cli/connections.c:8352
#, c-format
msgid "Editing existing '%s' connection: '%s'"
msgstr ""

#: ../clients/cli/connections.c:8354
#, c-format
msgid "Adding a new '%s' connection"
msgstr ""

#: ../clients/cli/connections.c:8356
#, c-format
msgid "Type 'help' or '?' for available commands."
msgstr ""

#: ../clients/cli/connections.c:8358
#, c-format
msgid "Type 'print' to show all the connection properties."
msgstr ""

#: ../clients/cli/connections.c:8360
#, c-format
msgid "Type 'describe [<setting>.<prop>]' for detailed property description."
msgstr ""

#: ../clients/cli/connections.c:8388
#, c-format
msgid "Error: Failed to modify connection '%s': %s"
msgstr ""

#: ../clients/cli/connections.c:8394
#, c-format
msgid "Connection '%s' (%s) successfully modified.\n"
msgstr ""

#: ../clients/cli/connections.c:8470
#, c-format
msgid "%s (%s) cloned as %s (%s).\n"
msgstr ""

#: ../clients/cli/connections.c:8536
msgid "New connection name: "
msgstr ""

#: ../clients/cli/connections.c:8538
#, c-format
msgid "Error: <new name> argument is missing."
msgstr ""

#: ../clients/cli/connections.c:8543 ../clients/cli/connections.c:9026
#, c-format
msgid "Error: unknown extra argument: '%s'."
msgstr ""

#: ../clients/cli/connections.c:8588
#, c-format
msgid "Error: not all connections deleted."
msgstr ""

#: ../clients/cli/connections.c:8589
#, c-format
msgid "Error: Connection deletion failed: %s"
msgstr ""

#: ../clients/cli/connections.c:8645 ../clients/cli/connections.c:8766
#, c-format
msgid "Error: %s.\n"
msgstr ""

#: ../clients/cli/connections.c:8646 ../clients/cli/connections.c:8767
#, c-format
msgid "Error: not all connections found."
msgstr ""

#. truncate trailing ", "
#: ../clients/cli/connections.c:8697
#, c-format
msgid "Error: cannot delete unknown connection(s): %s."
msgstr ""

#: ../clients/cli/connections.c:8707
#, c-format
msgid "%s: connection profile changed\n"
msgstr ""

#: ../clients/cli/connections.c:8733
#, c-format
msgid "%s: connection profile created\n"
msgstr ""

#: ../clients/cli/connections.c:8742
#, c-format
msgid "%s: connection profile removed\n"
msgstr ""

#: ../clients/cli/connections.c:8804
#, c-format
msgid "Error: failed to reload connections: %s."
msgstr ""

#: ../clients/cli/connections.c:8837
#, c-format
msgid "Error: failed to load connection: %s."
msgstr ""

#: ../clients/cli/connections.c:8845
#, fuzzy, c-format
msgid "Could not load file '%s'\n"
msgstr "Sertifikaati ei saa dešifreerida: %s"

#: ../clients/cli/connections.c:8852
msgid "File to import: "
msgstr ""

#: ../clients/cli/connections.c:8886
#, c-format
msgid "Error: No arguments provided."
msgstr ""

#: ../clients/cli/connections.c:8909
#, c-format
msgid "Warning: 'type' already specified, ignoring extra one.\n"
msgstr ""

#: ../clients/cli/connections.c:8923
#, c-format
msgid "Warning: 'file' already specified, ignoring extra one.\n"
msgstr ""

#: ../clients/cli/connections.c:8925
#, c-format
msgid "Unknown parameter: %s"
msgstr ""

#: ../clients/cli/connections.c:8936
#, c-format
msgid "Error: 'type' argument is required."
msgstr ""

#: ../clients/cli/connections.c:8940
#, c-format
msgid "Error: 'file' argument is required."
msgstr ""

#: ../clients/cli/connections.c:8946
#, c-format
msgid "Error: failed to find VPN plugin for %s."
msgstr ""

#: ../clients/cli/connections.c:8953 ../clients/cli/connections.c:9047
#, c-format
msgid "Error: failed to load VPN plugin: %s."
msgstr ""

#: ../clients/cli/connections.c:8960
#, c-format
msgid "Error: failed to import '%s': %s."
msgstr ""

#: ../clients/cli/connections.c:9033
msgid "Output file name: "
msgstr ""

#: ../clients/cli/connections.c:9038
#, c-format
msgid "Error: the connection is not VPN."
msgstr ""

#: ../clients/cli/connections.c:9060
#, c-format
msgid "Error: failed to create temporary file %s."
msgstr ""

#: ../clients/cli/connections.c:9068
#, c-format
msgid "Error: failed to export '%s': %s."
msgstr ""

#: ../clients/cli/connections.c:9080
#, c-format
msgid "Error: failed to read temporary file '%s': %s."
msgstr ""

#. define some prompts
#: ../clients/cli/devices.c:39
msgid "Interface: "
msgstr ""

#: ../clients/cli/devices.c:40
msgid "Interface(s): "
msgstr ""

#: ../clients/cli/devices.c:73 ../clients/cli/devices.c:1235
msgid "(none)"
msgstr ""

#: ../clients/cli/devices.c:184 ../clients/cli/devices.c:191
msgid "(unknown)"
msgstr ""

#: ../clients/cli/devices.c:339
#, c-format
msgid "<invisible> | %s"
msgstr ""

#: ../clients/cli/devices.c:340
msgid "<invisible>"
msgstr ""

#: ../clients/cli/devices.c:441
#, c-format
msgid "%u Mb/s"
msgstr ""

#: ../clients/cli/devices.c:695
#, c-format
msgid ""
"Usage: nmcli device { COMMAND | help }\n"
"\n"
"COMMAND := { status | show | set | connect | reapply | modify | disconnect | "
"delete | monitor | wifi | lldp }\n"
"\n"
"  status\n"
"\n"
"  show [<ifname>]\n"
"\n"
"  set [ifname] <ifname> [autoconnect yes|no] [managed yes|no]\n"
"\n"
"  connect <ifname>\n"
"\n"
"  reapply <ifname>\n"
"\n"
"  modify <ifname> ([+|-]<setting>.<property> <value>)+\n"
"\n"
"  disconnect <ifname> ...\n"
"\n"
"  delete <ifname> ...\n"
"\n"
"  monitor <ifname> ...\n"
"\n"
"  wifi [list [ifname <ifname>] [bssid <BSSID>] [--rescan yes|no|auto]]\n"
"\n"
"  wifi connect <(B)SSID> [password <password>] [wep-key-type key|phrase] "
"[ifname <ifname>]\n"
"                         [bssid <BSSID>] [name <name>] [private yes|no] "
"[hidden yes|no]\n"
"\n"
"  wifi hotspot [ifname <ifname>] [con-name <name>] [ssid <SSID>] [band a|bg] "
"[channel <channel>] [password <password>]\n"
"\n"
"  wifi rescan [ifname <ifname>] [[ssid <SSID to scan>] ...]\n"
"\n"
"  lldp [list [ifname <ifname>]]\n"
"\n"
msgstr ""

#: ../clients/cli/devices.c:718
#, c-format
msgid ""
"Usage: nmcli device status { help }\n"
"\n"
"Show status for all devices.\n"
"By default, the following columns are shown:\n"
" DEVICE     - interface name\n"
" TYPE       - device type\n"
" STATE      - device state\n"
" CONNECTION - connection activated on device (if any)\n"
"Displayed columns can be changed using '--fields' global option. 'status' "
"is\n"
"the default command, which means 'nmcli device' calls 'nmcli device "
"status'.\n"
"\n"
msgstr ""

#: ../clients/cli/devices.c:733
#, c-format
msgid ""
"Usage: nmcli device show { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<ifname>]\n"
"\n"
"Show details of device(s).\n"
"The command lists details for all devices, or for a given device.\n"
"\n"
msgstr ""

#: ../clients/cli/devices.c:744
#, c-format
msgid ""
"Usage: nmcli device connect { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname>\n"
"\n"
"Connect the device.\n"
"NetworkManager will try to find a suitable connection that will be "
"activated.\n"
"It will also consider connections that are not set to auto-connect.\n"
"\n"
msgstr ""

#: ../clients/cli/devices.c:756
#, c-format
msgid ""
"Usage: nmcli device reapply { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname>\n"
"\n"
"Attempts to update device with changes to the currently active connection\n"
"made since it was last applied.\n"
"\n"
msgstr ""

#: ../clients/cli/devices.c:767
#, c-format
msgid ""
"Usage: nmcli device modify { ARGUMENTS | --help }\n"
"\n"
"ARGUMENTS := <ifname> ([+|-]<setting>.<property> <value>)+\n"
"\n"
"Modify one or more properties currently active on the device without "
"modifying\n"
"the connection profile. The changes have immediate effect. For multi-valued\n"
"properties you can use optional '+' or '-' prefix to the property name.\n"
"The '+' sign allows appending items instead of overwriting the whole value.\n"
"The '-' sign allows removing selected items instead of the whole value.\n"
"\n"
"Examples:\n"
"nmcli dev mod em1 ipv4.method manual ipv4.addr \"192.168.1.2/24, "
"10.10.1.5/8\"\n"
"nmcli dev mod em1 +ipv4.dns 8.8.4.4\n"
"nmcli dev mod em1 -ipv4.dns 1\n"
"nmcli dev mod em1 -ipv6.addr \"abbe::cafe/56\"\n"
msgstr ""

#: ../clients/cli/devices.c:787
#, c-format
msgid ""
"Usage: nmcli device disconnect { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname> ...\n"
"\n"
"Disconnect devices.\n"
"The command disconnects the device and prevents it from auto-activating\n"
"further connections without user/manual intervention.\n"
"\n"
msgstr ""

#: ../clients/cli/devices.c:799
#, c-format
msgid ""
"Usage: nmcli device delete { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname> ...\n"
"\n"
"Delete the software devices.\n"
"The command removes the interfaces. It only works for software devices\n"
"(like bonds, bridges, etc.). Hardware devices cannot be deleted by the\n"
"command.\n"
"\n"
msgstr ""

#: ../clients/cli/devices.c:812
#, c-format
msgid ""
"Usage: nmcli device set { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := DEVICE { PROPERTY [ PROPERTY ... ] }\n"
"DEVICE    := [ifname] <ifname> \n"
"PROPERTY  := { autoconnect { yes | no } |\n"
"             { managed { yes | no }\n"
"\n"
"Modify device properties.\n"
"\n"
msgstr ""

#: ../clients/cli/devices.c:825
#, c-format
msgid ""
"Usage: nmcli device monitor { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<ifname>] ...\n"
"\n"
"Monitor device activity.\n"
"This command prints a line whenever the specified devices change state.\n"
"Monitors all devices in case no interface is specified.\n"
"\n"
msgstr ""

#: ../clients/cli/devices.c:837
#, c-format
msgid ""
"Usage: nmcli device wifi { ARGUMENTS | help }\n"
"\n"
"Perform operation on Wi-Fi devices.\n"
"\n"
"ARGUMENTS := [list [ifname <ifname>] [bssid <BSSID>] [--rescan yes|no|"
"auto]]\n"
"\n"
"List available Wi-Fi access points. The 'ifname' and 'bssid' options can be\n"
"used to list APs for a particular interface, or with a specific BSSID. The\n"
"--rescan flag tells whether a new Wi-Fi scan should be triggered.\n"
"\n"
"ARGUMENTS := connect <(B)SSID> [password <password>] [wep-key-type key|"
"phrase] [ifname <ifname>]\n"
"                     [bssid <BSSID>] [name <name>] [private yes|no] [hidden "
"yes|no]\n"
"\n"
"Connect to a Wi-Fi network specified by SSID or BSSID. The command finds a\n"
"matching connection or creates one and then activates it on a device. This\n"
"is a command-line counterpart of clicking an SSID in a GUI client. If a\n"
"connection for the network already exists, it is possible to bring up the\n"
"existing profile as follows: nmcli con up id <name>. Note that only open,\n"
"WEP and WPA-PSK networks are supported if no previous connection exists.\n"
"It is also assumed that IP configuration is obtained via DHCP.\n"
"\n"
"ARGUMENTS := hotspot [ifname <ifname>] [con-name <name>] [ssid <SSID>]\n"
"                     [band a|bg] [channel <channel>] [password <password>]\n"
"\n"
"Create a Wi-Fi hotspot. Use 'connection down' or 'device disconnect'\n"
"to stop the hotspot.\n"
"Parameters of the hotspot can be influenced by the optional parameters:\n"
"ifname - Wi-Fi device to use\n"
"con-name - name of the created hotspot connection profile\n"
"ssid - SSID of the hotspot\n"
"band - Wi-Fi band to use\n"
"channel - Wi-Fi channel to use\n"
"password - password to use for the hotspot\n"
"\n"
"ARGUMENTS := rescan [ifname <ifname>] [[ssid <SSID to scan>] ...]\n"
"\n"
"Request that NetworkManager immediately re-scan for available access "
"points.\n"
"NetworkManager scans Wi-Fi networks periodically, but in some cases it "
"might\n"
"be useful to start scanning manually. 'ssid' allows scanning for a specific\n"
"SSID, which is useful for APs with hidden SSIDs. More 'ssid' parameters can "
"be\n"
"given. Note that this command does not show the APs,\n"
"use 'nmcli device wifi list' for that.\n"
"\n"
msgstr ""

#: ../clients/cli/devices.c:884
#, c-format
msgid ""
"Usage: nmcli device lldp { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [list [ifname <ifname>]]\n"
"\n"
"List neighboring devices discovered through LLDP. The 'ifname' option can "
"be\n"
"used to list neighbors for a particular interface.\n"
"\n"
msgstr ""

#: ../clients/cli/devices.c:982
#, c-format
msgid "Error: No interface specified."
msgstr ""

#: ../clients/cli/devices.c:1005
#, c-format
msgid "Warning: argument '%s' is duplicated.\n"
msgstr ""

#: ../clients/cli/devices.c:1008
#, c-format
msgid "Error: Device '%s' not found.\n"
msgstr ""

#: ../clients/cli/devices.c:1009
#, c-format
msgid "Error: not all devices found."
msgstr ""

#: ../clients/cli/devices.c:1040
msgid "No interface specified"
msgstr ""

#: ../clients/cli/devices.c:1059
#, c-format
msgid "Device '%s' not found"
msgstr ""

#: ../clients/cli/devices.c:1155
#, c-format
msgid "%u MHz"
msgstr ""

#: ../clients/cli/devices.c:1156
#, c-format
msgid "%u Mbit/s"
msgstr ""

#: ../clients/cli/devices.c:1167
msgid "WEP"
msgstr ""

#: ../clients/cli/devices.c:1171
msgid "WPA1"
msgstr ""

#: ../clients/cli/devices.c:1175
msgid "WPA2"
msgstr ""

#: ../clients/cli/devices.c:1180
msgid "802.1X"
msgstr ""

#: ../clients/cli/devices.c:1195
msgid "Ad-Hoc"
msgstr ""

#: ../clients/cli/devices.c:1196
msgid "Infra"
msgstr ""

#: ../clients/cli/devices.c:1197
msgid "N/A"
msgstr ""

#: ../clients/cli/devices.c:1392
msgid "Device details"
msgstr ""

#: ../clients/cli/devices.c:1403
#, c-format
msgid "Error: 'device show': %s"
msgstr ""

#: ../clients/cli/devices.c:1701
msgid "Status of devices"
msgstr ""

#: ../clients/cli/devices.c:1705
#, c-format
msgid "Error: 'device status': %s"
msgstr ""

#: ../clients/cli/devices.c:1732 ../clients/cli/devices.c:2173
#: ../clients/cli/devices.c:4144
#, c-format
msgid "Error: invalid extra argument '%s'."
msgstr ""

#: ../clients/cli/devices.c:1768 ../clients/cli/general.c:518
#, c-format
msgid "Error: Timeout %d sec expired."
msgstr ""

#: ../clients/cli/devices.c:1817
#, c-format
msgid "Device '%s' successfully activated with '%s'.\n"
msgstr ""

#: ../clients/cli/devices.c:1823
#, c-format
msgid "Error: Connection activation failed: (%d) %s.\n"
msgstr ""

#: ../clients/cli/devices.c:1862
#, c-format
msgid "Error: Failed to setup a Wi-Fi hotspot: %s"
msgstr ""

#: ../clients/cli/devices.c:1865
#, c-format
msgid "Error: Failed to add/activate new connection: %s"
msgstr ""

#: ../clients/cli/devices.c:1868
#, fuzzy, c-format
msgid "Error: Failed to activate connection: %s"
msgstr "IV määramine dešifreerimiseks nurjus: %s / %s."

#: ../clients/cli/devices.c:1938
#, c-format
msgid "Error: Device activation failed: %s"
msgstr ""

#: ../clients/cli/devices.c:1947
#, c-format
msgid "Error: Device activation failed: device was disconnected"
msgstr ""

#: ../clients/cli/devices.c:2000
#, c-format
msgid "Error: extra argument not allowed: '%s'."
msgstr ""

#: ../clients/cli/devices.c:2073 ../clients/cli/devices.c:2088
#: ../clients/cli/devices.c:2325
#, c-format
msgid "Device '%s' successfully disconnected.\n"
msgstr ""

#: ../clients/cli/devices.c:2076 ../clients/cli/devices.c:2399
#, c-format
msgid "Device '%s' successfully removed.\n"
msgstr ""

#: ../clients/cli/devices.c:2138 ../clients/cli/devices.c:2208
#, fuzzy, c-format
msgid "Error: Reapplying connection to device '%s' (%s) failed: %s"
msgstr "Sertifikaadi andmete lähtestamine nurjus: %s"

#: ../clients/cli/devices.c:2148 ../clients/cli/devices.c:2217
#, c-format
msgid "Connection successfully reapplied to device '%s'.\n"
msgstr ""

#: ../clients/cli/devices.c:2242
#, c-format
msgid "Error: Reading applied connection from device '%s' (%s) failed: %s"
msgstr ""

#: ../clients/cli/devices.c:2309
#, c-format
msgid "Error: not all devices disconnected."
msgstr ""

#: ../clients/cli/devices.c:2310
#, c-format
msgid "Error: Device '%s' (%s) disconnecting failed: %s\n"
msgstr ""

#: ../clients/cli/devices.c:2390
#, c-format
msgid "Error: not all devices deleted."
msgstr ""

#: ../clients/cli/devices.c:2391
#, c-format
msgid "Error: Device '%s' (%s) deletion failed: %s\n"
msgstr ""

#: ../clients/cli/devices.c:2473
#, c-format
msgid "Error: No property specified."
msgstr ""

#: ../clients/cli/devices.c:2488 ../clients/cli/devices.c:2505
#: ../clients/cli/general.c:691 ../clients/cli/general.c:703
#, c-format
msgid "Error: '%s' argument is missing."
msgstr ""

#: ../clients/cli/devices.c:2494
#, c-format
msgid "Error: 'managed': %s."
msgstr ""

#: ../clients/cli/devices.c:2511
#, c-format
msgid "Error: 'autoconnect': %s."
msgstr ""

#: ../clients/cli/devices.c:2519 ../clients/cli/general.c:717
#, c-format
msgid "Error: property '%s' is not known."
msgstr ""

#: ../clients/cli/devices.c:2568
#, c-format
msgid "%s: using connection '%s'\n"
msgstr ""

#: ../clients/cli/devices.c:2594
#, c-format
msgid "%s: device created\n"
msgstr ""

#: ../clients/cli/devices.c:2601
#, c-format
msgid "%s: device removed\n"
msgstr ""

#: ../clients/cli/devices.c:2781
msgid "Wi-Fi scan list"
msgstr ""

#: ../clients/cli/devices.c:2868
#, c-format
msgid "Error: Access point with bssid '%s' not found."
msgstr ""

#: ../clients/cli/devices.c:3024
#, c-format
msgid "Error: 'device wifi': %s"
msgstr ""

#: ../clients/cli/devices.c:3042
#, c-format
msgid "Error: invalid rescan argument: '%s' not among [auto, no, yes]"
msgstr ""

#: ../clients/cli/devices.c:3049
#, c-format
msgid "Error: Device '%s' not found."
msgstr ""

#: ../clients/cli/devices.c:3060
#, c-format
msgid ""
"Error: Device '%s' was not recognized as a Wi-Fi device, check "
"NetworkManager Wi-Fi plugin."
msgstr ""

#: ../clients/cli/devices.c:3064 ../clients/cli/devices.c:3324
#: ../clients/cli/devices.c:3823 ../clients/cli/devices.c:3982
#, c-format
msgid "Error: Device '%s' is not a Wi-Fi device."
msgstr ""

#: ../clients/cli/devices.c:3173
msgid "SSID or BSSID: "
msgstr ""

#: ../clients/cli/devices.c:3178
#, c-format
msgid "Error: SSID or BSSID are missing."
msgstr ""

#: ../clients/cli/devices.c:3215
#, c-format
msgid "Error: bssid argument value '%s' is not a valid BSSID."
msgstr ""

#: ../clients/cli/devices.c:3245
#, c-format
msgid ""
"Error: wep-key-type argument value '%s' is invalid, use 'key' or 'phrase'."
msgstr ""

#: ../clients/cli/devices.c:3272 ../clients/cli/devices.c:3290
#, c-format
msgid "Error: %s: %s."
msgstr ""

#: ../clients/cli/devices.c:3307
#, c-format
msgid "Error: BSSID to connect to (%s) differs from bssid argument (%s)."
msgstr ""

#: ../clients/cli/devices.c:3313
#, c-format
msgid "Error: Parameter '%s' is neither SSID nor BSSID."
msgstr ""

#: ../clients/cli/devices.c:3326 ../clients/cli/devices.c:3825
#: ../clients/cli/devices.c:3984
#, c-format
msgid "Error: No Wi-Fi device found."
msgstr ""

#: ../clients/cli/devices.c:3346
#, c-format
msgid "Error: Failed to scan hidden SSID: %s."
msgstr ""

#: ../clients/cli/devices.c:3373
#, c-format
msgid "Error: No network with SSID '%s' found."
msgstr ""

#: ../clients/cli/devices.c:3375
#, c-format
msgid "Error: No access point with BSSID '%s' found."
msgstr ""

#: ../clients/cli/devices.c:3403
#, c-format
msgid "Error: Connection '%s' exists but properties don't match."
msgstr ""

#: ../clients/cli/devices.c:3446
#, c-format
msgid ""
"Warning: '%s' should be SSID for hidden APs; but it looks like a BSSID.\n"
msgstr ""

#: ../clients/cli/devices.c:3482
msgid "Password: "
msgstr ""

#: ../clients/cli/devices.c:3644
#, c-format
msgid "'%s' is not valid WPA PSK"
msgstr ""

#: ../clients/cli/devices.c:3661
#, c-format
msgid "'%s' is not valid WEP key (it should be 5 or 13 ASCII chars)"
msgstr ""

#: ../clients/cli/devices.c:3677
#, c-format
msgid "Hotspot password: %s\n"
msgstr ""

#: ../clients/cli/devices.c:3748
#, c-format
msgid "Error: ssid is too long."
msgstr ""

#: ../clients/cli/devices.c:3762
#, c-format
msgid "Error: band argument value '%s' is invalid; use 'a' or 'bg'."
msgstr ""

#: ../clients/cli/devices.c:3787
#, c-format
msgid "Error: Unknown parameter %s."
msgstr ""

#: ../clients/cli/devices.c:3807
#, c-format
msgid "Error: channel requires band too."
msgstr ""

#: ../clients/cli/devices.c:3812
#, c-format
msgid "Error: channel '%s' not valid for band '%s'."
msgstr ""

#: ../clients/cli/devices.c:3836
#, c-format
msgid "Error: Device '%s' supports neither AP nor Ad-Hoc mode."
msgstr ""

#: ../clients/cli/devices.c:3870
#, c-format
msgid "Error: Invalid 'password': %s."
msgstr ""

#: ../clients/cli/devices.c:3945
#, c-format
msgid "Error: '%s' cannot repeat."
msgstr ""

#. Main header name
#: ../clients/cli/devices.c:4050
msgid "Device LLDP neighbors"
msgstr ""

#: ../clients/cli/devices.c:4160
#, c-format
msgid "Error: 'device lldp list': %s"
msgstr ""

#: ../clients/cli/general.c:42
msgid "asleep"
msgstr ""

#: ../clients/cli/general.c:43
msgid "connecting"
msgstr ""

#: ../clients/cli/general.c:44
msgid "connected (local only)"
msgstr ""

#: ../clients/cli/general.c:45
msgid "connected (site only)"
msgstr ""

#: ../clients/cli/general.c:46 ../clients/common/nm-client-utils.c:270
msgid "connected"
msgstr ""

#: ../clients/cli/general.c:47
msgid "disconnecting"
msgstr ""

#: ../clients/cli/general.c:48 ../clients/common/nm-client-utils.c:263
msgid "disconnected"
msgstr ""

#: ../clients/cli/general.c:137
msgid "auth"
msgstr ""

#: ../clients/cli/general.c:165
msgid "running"
msgstr ""

#: ../clients/cli/general.c:179
msgid "starting"
msgstr ""

#: ../clients/cli/general.c:179
msgid "started"
msgstr ""

#: ../clients/cli/general.c:213
msgid "enabled"
msgstr ""

#: ../clients/cli/general.c:213
msgid "disabled"
msgstr ""

#: ../clients/cli/general.c:331
#, c-format
msgid ""
"Usage: nmcli general { COMMAND | help }\n"
"\n"
"COMMAND := { status | hostname | permissions | logging }\n"
"\n"
"  status\n"
"\n"
"  hostname [<hostname>]\n"
"\n"
"  permissions\n"
"\n"
"  logging [level <log level>] [domains <log domains>]\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:342
#, c-format
msgid ""
"Usage: nmcli general status { help }\n"
"\n"
"Show overall status of NetworkManager.\n"
"'status' is the default action, which means 'nmcli gen' calls 'nmcli gen "
"status'\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:351
#, c-format
msgid ""
"Usage: nmcli general hostname { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<hostname>]\n"
"\n"
"Get or change persistent system hostname.\n"
"With no arguments, this prints currently configured hostname. When you pass\n"
"a hostname, NetworkManager will set it as the new persistent system "
"hostname.\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:363
#, c-format
msgid ""
"Usage: nmcli general permissions { help }\n"
"\n"
"Show caller permissions for authenticated operations.\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:371
#, c-format
msgid ""
"Usage: nmcli general logging { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [level <log level>] [domains <log domains>]\n"
"\n"
"Get or change NetworkManager logging level and domains.\n"
"Without any argument current logging level and domains are shown. In order "
"to\n"
"change logging state, provide level and/or domain. Please refer to the man "
"page\n"
"for the list of possible logging domains.\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:384
#, c-format
msgid ""
"Usage: nmcli networking { COMMAND | help }\n"
"\n"
"COMMAND := { [ on | off | connectivity ] }\n"
"\n"
"  on\n"
"\n"
"  off\n"
"\n"
"  connectivity [check]\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:394
#, c-format
msgid ""
"Usage: nmcli networking on { help }\n"
"\n"
"Switch networking on.\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:402
#, c-format
msgid ""
"Usage: nmcli networking off { help }\n"
"\n"
"Switch networking off.\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:410
#, c-format
msgid ""
"Usage: nmcli networking connectivity { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [check]\n"
"\n"
"Get network connectivity state.\n"
"The optional 'check' argument makes NetworkManager re-check the "
"connectivity.\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:422
#, c-format
msgid ""
"Usage: nmcli radio { COMMAND | help }\n"
"\n"
"COMMAND := { all | wifi | wwan }\n"
"\n"
"  all | wifi | wwan [ on | off ]\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:431
#, c-format
msgid ""
"Usage: nmcli radio all { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of all radio switches, or turn them on/off.\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:441
#, c-format
msgid ""
"Usage: nmcli radio wifi { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of Wi-Fi radio switch, or turn it on/off.\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:451
#, c-format
msgid ""
"Usage: nmcli radio wwan { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of mobile broadband radio switch, or turn it on/off.\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:461
#, c-format
msgid ""
"Usage: nmcli monitor\n"
"\n"
"Monitor NetworkManager changes.\n"
"Prints a line whenever a change occurs in NetworkManager\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:491
msgid "NetworkManager status"
msgstr ""

#: ../clients/cli/general.c:495
#, c-format
msgid "Error: only these fields are allowed: %s"
msgstr ""

#: ../clients/cli/general.c:548
msgid "NetworkManager permissions"
msgstr ""

#: ../clients/cli/general.c:552
#, c-format
msgid "Error: 'general permissions': %s"
msgstr ""

#: ../clients/cli/general.c:641
msgid "NetworkManager logging"
msgstr ""

#: ../clients/cli/general.c:645
#, c-format
msgid "Error: 'general logging': %s"
msgstr ""

#: ../clients/cli/general.c:727
#, c-format
msgid "Error: failed to set logging: %s"
msgstr ""

#: ../clients/cli/general.c:744
#, c-format
msgid "Error: failed to set hostname: %s"
msgstr ""

#: ../clients/cli/general.c:813
#, c-format
msgid "Error: '--fields' value '%s' is not valid here (allowed field: %s)"
msgstr ""

#: ../clients/cli/general.c:838
#, c-format
msgid "Error: invalid '%s' argument: '%s' (use on/off)."
msgstr ""

#. no arguments -> get current state
#: ../clients/cli/general.c:886 ../clients/cli/general.c:898
msgid "Connectivity"
msgstr ""

#: ../clients/cli/general.c:901
#, c-format
msgid "Error: 'networking' command '%s' is not valid."
msgstr ""

#: ../clients/cli/general.c:915
msgid "Networking"
msgstr ""

#. no argument, show all radio switches
#: ../clients/cli/general.c:950
msgid "Radio switches"
msgstr ""

#. no argument, show current Wi-Fi state
#: ../clients/cli/general.c:980
msgid "Wi-Fi radio switch"
msgstr ""

#. no argument, show current WWAN (mobile broadband) state
#: ../clients/cli/general.c:1007
msgid "WWAN radio switch"
msgstr ""

#: ../clients/cli/general.c:1055
msgid "NetworkManager has started"
msgstr ""

#: ../clients/cli/general.c:1055
msgid "NetworkManager has stopped"
msgstr ""

#: ../clients/cli/general.c:1066
#, c-format
msgid "Hostname set to '%s'\n"
msgstr ""

#: ../clients/cli/general.c:1081
#, c-format
msgid "'%s' is now the primary connection\n"
msgstr ""

#: ../clients/cli/general.c:1083
#, c-format
msgid "There's no primary connection\n"
msgstr ""

#: ../clients/cli/general.c:1095
#, c-format
msgid "Connectivity is now '%s'\n"
msgstr ""

#: ../clients/cli/general.c:1109
#, c-format
msgid "Networkmanager is now in the '%s' state\n"
msgstr ""

#: ../clients/cli/general.c:1129
msgid "connection available"
msgstr ""

#: ../clients/cli/general.c:1131
msgid "connections available"
msgstr ""

#: ../clients/cli/general.c:1149
msgid "autoconnect"
msgstr ""

#: ../clients/cli/general.c:1151
msgid "fw missing"
msgstr ""

#: ../clients/cli/general.c:1156
msgid "plugin missing"
msgstr ""

#: ../clients/cli/general.c:1161
msgid "sw"
msgstr ""

#: ../clients/cli/general.c:1163
msgid "hw"
msgstr ""

#: ../clients/cli/general.c:1168
msgid "iface"
msgstr ""

#: ../clients/cli/general.c:1171
msgid "port"
msgstr ""

#: ../clients/cli/general.c:1174
msgid "mtu"
msgstr ""

#: ../clients/cli/general.c:1191
msgid "master"
msgstr ""

#: ../clients/cli/general.c:1195 ../clients/tui/nm-editor-utils.c:239
#: ../clients/tui/nmt-connect-connection-list.c:407
msgid "VPN"
msgstr ""

#: ../clients/cli/general.c:1197
msgid "ip4 default"
msgstr ""

#: ../clients/cli/general.c:1199
msgid "ip6 default"
msgstr ""

#: ../clients/cli/general.c:1281
#, c-format
msgid "%s VPN connection"
msgstr ""

#: ../clients/cli/general.c:1349
#, c-format
msgid ""
"Use \"nmcli device show\" to get complete information about known devices "
"and\n"
"\"nmcli connection show\" to get an overview on active connection profiles.\n"
"\n"
"Consult nmcli(1) and nmcli-examples(5) manual pages for complete usage "
"details.\n"
msgstr ""

#: ../clients/cli/general.c:1370
#, c-format
msgid "Error: 'monitor' command '%s' is not valid."
msgstr ""

#: ../clients/cli/general.c:1382
msgid "Networkmanager is not running (waiting for it)\n"
msgstr ""

#: ../clients/cli/nmcli.c:245
#, c-format
msgid ""
"Usage: nmcli [OPTIONS] OBJECT { COMMAND | help }\n"
"\n"
"OPTIONS\n"
"  -a, --ask                                ask for missing parameters\n"
"  -c, --colors auto|yes|no                 whether to use colors in output\n"
"  -e, --escape yes|no                      escape columns separators in "
"values\n"
"  -f, --fields <field,...>|all|common      specify fields to output\n"
"  -g, --get-values <field,...>|all|common  shortcut for -m tabular -t -f\n"
"  -h, --help                               print this help\n"
"  -m, --mode tabular|multiline             output mode\n"
"  -o, --overview                           overview mode\n"
"  -p, --pretty                             pretty output\n"
"  -s, --show-secrets                       allow displaying passwords\n"
"  -t, --terse                              terse output\n"
"  -v, --version                            how program version\n"
"  -w, --wait <seconds>                     set timeout waiting for finishing "
"operations\n"
"\n"
"OBJECT\n"
"  g[eneral]       NetworkManager's general status and operations\n"
"  n[etworking]    overall networking control\n"
"  r[adio]         NetworkManager radio switches\n"
"  c[onnection]    NetworkManager's connections\n"
"  d[evice]        devices managed by NetworkManager\n"
"  a[gent]         NetworkManager secret agent or polkit agent\n"
"  m[onitor]       monitor NetworkManager changes\n"
"\n"
msgstr ""

#: ../clients/cli/nmcli.c:325
#, c-format
msgid "Error: missing argument for '%s' option."
msgstr ""

#: ../clients/cli/nmcli.c:626
#, c-format
msgid "Unexpected end of file following '%s'\n"
msgstr ""

#: ../clients/cli/nmcli.c:634
#, c-format
msgid "Expected whitespace following '%s'\n"
msgstr ""

#: ../clients/cli/nmcli.c:646
#, c-format
msgid "Expected a value for '%s'\n"
msgstr ""

#: ../clients/cli/nmcli.c:660
#, c-format
msgid "Expected a line break following '%s'\n"
msgstr ""

#: ../clients/cli/nmcli.c:749
#, c-format
msgid "Error: Option '--terse' is specified the second time."
msgstr ""

#: ../clients/cli/nmcli.c:754
#, c-format
msgid "Error: Option '--terse' is mutually exclusive with '--pretty'."
msgstr ""

#: ../clients/cli/nmcli.c:762
#, c-format
msgid "Error: Option '--pretty' is specified the second time."
msgstr ""

#: ../clients/cli/nmcli.c:767
#, c-format
msgid "Error: Option '--pretty' is mutually exclusive with '--terse'."
msgstr ""

#: ../clients/cli/nmcli.c:782
#, c-format
msgid "Error: '%s' is not a valid argument for '%s' option."
msgstr ""

#: ../clients/cli/nmcli.c:796 ../clients/cli/nmcli.c:808
#, c-format
msgid "Error: '%s' is not valid argument for '%s' option."
msgstr ""

#: ../clients/cli/nmcli.c:832
#, c-format
msgid "Error: '%s' is not a valid timeout."
msgstr ""

#: ../clients/cli/nmcli.c:839
#, c-format
msgid "nmcli tool, version %s\n"
msgstr ""

#: ../clients/cli/nmcli.c:847
#, c-format
msgid "Error: Option '%s' is unknown, try 'nmcli -help'."
msgstr ""

#: ../clients/cli/nmcli.c:903 ../clients/cli/nmcli.c:910
#, c-format
msgid "Error: nmcli terminated by signal %s (%d)"
msgstr ""

#: ../clients/cli/nmcli.c:1060
msgid "Success"
msgstr ""

#: ../clients/cli/polkit-agent.c:69
#, c-format
msgid "Authentication message: %s\n"
msgstr ""

#: ../clients/cli/polkit-agent.c:77
#, c-format
msgid "Authentication error: %s\n"
msgstr ""

#: ../clients/cli/polkit-agent.c:137
#, c-format
msgid "Warning: polkit agent initialization failed: %s\n"
msgstr ""

#: ../clients/cli/settings.c:46
#, c-format
msgid "Do you also want to set '%s' to '%s'? [yes]: "
msgstr ""

#: ../clients/cli/settings.c:48
#, c-format
msgid "Do you also want to clear '%s'? [yes]: "
msgstr ""

#: ../clients/cli/settings.c:224
#, c-format
msgid ""
"Warning: %s.%s set to '%s', but it might be ignored in infrastructure mode\n"
msgstr ""

#: ../clients/cli/settings.c:243
#, c-format
msgid "Warning: setting %s.%s requires removing ipv4 and ipv6 settings\n"
msgstr ""

#: ../clients/cli/settings.c:245
msgid "Do you want to remove them? [yes] "
msgstr ""

#: ../clients/cli/settings.c:333
#, c-format
msgid "Warning: %s is not an UUID of any existing connection profile\n"
msgstr ""

#: ../clients/cli/settings.c:338 ../clients/cli/settings.c:351
#, c-format
msgid "'%s' is not a VPN connection profile"
msgstr ""

#: ../clients/cli/settings.c:345
#, c-format
msgid "'%s' is not a name of any exiting profile"
msgstr ""

#: ../clients/cli/settings.c:389
#, c-format
msgid "Warning: %s\n"
msgstr ""

#: ../clients/cli/settings.c:392
#, c-format
msgid "Info: %s\n"
msgstr ""

#: ../clients/cli/settings.c:485
msgid "don't know how to get the property value"
msgstr ""

#: ../clients/cli/settings.c:575 ../clients/cli/settings.c:617
msgid "the property can't be changed"
msgstr ""

#: ../clients/cli/settings.c:731
msgid "[NM property description]"
msgstr ""

#: ../clients/cli/settings.c:741
msgid "[nmcli specific description]"
msgstr ""

#: ../clients/cli/utils.c:320
#, c-format
msgid "Error: Argument '%s' was expected, but '%s' provided."
msgstr ""

#: ../clients/cli/utils.c:323
#, c-format
msgid "Error: Unexpected argument '%s'"
msgstr ""

#: ../clients/cli/utils.c:710
#, c-format
msgid "invalid field '%s%s%s'; no such field"
msgstr ""

#: ../clients/cli/utils.c:714
#, c-format
msgid "invalid field '%s%s%s'; allowed fields: [%s]"
msgstr ""

#: ../clients/cli/utils.c:810
#, fuzzy, c-format
msgid "failure to select field"
msgstr "Privaatvõtme dešifreerimine nurjus: %d."

#: ../clients/cli/utils.c:1438
#, c-format
msgid "Error reading nmcli output: %s\n"
msgstr ""

#: ../clients/cli/utils.c:1443
#, c-format
msgid "Error writing nmcli output: %s\n"
msgstr ""

#: ../clients/cli/utils.c:1467
#, c-format
msgid "Failed to create pager pipe: %s\n"
msgstr ""

#: ../clients/cli/utils.c:1475
#, c-format
msgid "Failed to fork pager: %s\n"
msgstr ""

#: ../clients/cli/utils.c:1521 ../clients/cli/utils.c:1523
#, c-format
msgid "Failed to duplicate pager pipe: %s\n"
msgstr ""

#: ../clients/cli/utils.h:302 ../clients/common/nm-meta-setting-desc.c:4949
msgid "on"
msgstr ""

#: ../clients/cli/utils.h:302 ../clients/common/nm-meta-setting-desc.c:4951
msgid "off"
msgstr ""

#: ../clients/cli/utils.h:328
#, c-format
msgid "%lld (%s)"
msgstr ""

#: ../clients/cli/utils.h:335
#, c-format
msgid "%lld - %s"
msgstr ""

#. TRANSLATORS: the first %s is the partial value entered by
#. * the user, the second %s a list of compatible values.
#.
#: ../clients/common/nm-client-utils.c:117
#: ../clients/common/nm-client-utils.c:148
#, c-format
msgid "'%s' is ambiguous (%s)"
msgstr ""

#: ../clients/common/nm-client-utils.c:127
#, c-format
msgid "'%s' is not valid; use [%s] or [%s]"
msgstr ""

#: ../clients/common/nm-client-utils.c:160
#, c-format
msgid "'%s' is not valid; use [%s], [%s] or [%s]"
msgstr ""

#: ../clients/common/nm-client-utils.c:209
#, c-format
msgid "'%s' is ambiguous: %s"
msgstr ""

#: ../clients/common/nm-client-utils.c:219
#, c-format
msgid "missing name, try one of [%s]"
msgstr ""

#: ../clients/common/nm-client-utils.c:261
msgid "unmanaged"
msgstr ""

#: ../clients/common/nm-client-utils.c:262
msgid "unavailable"
msgstr ""

#: ../clients/common/nm-client-utils.c:264
msgid "connecting (prepare)"
msgstr ""

#: ../clients/common/nm-client-utils.c:265
msgid "connecting (configuring)"
msgstr ""

#: ../clients/common/nm-client-utils.c:266
msgid "connecting (need authentication)"
msgstr ""

#: ../clients/common/nm-client-utils.c:267
msgid "connecting (getting IP configuration)"
msgstr ""

#: ../clients/common/nm-client-utils.c:268
msgid "connecting (checking IP connectivity)"
msgstr ""

#: ../clients/common/nm-client-utils.c:269
msgid "connecting (starting secondary connections)"
msgstr ""

#: ../clients/common/nm-client-utils.c:272
msgid "connection failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:280
msgid "yes (guessed)"
msgstr ""

#: ../clients/common/nm-client-utils.c:281
msgid "no (guessed)"
msgstr ""

#. TRANSLATORS: Unknown reason for a device state change (NMDeviceStateReason)
#. TRANSLATORS: Unknown reason for a connection state change (NMActiveConnectionStateReason)
#: ../clients/common/nm-client-utils.c:287
#: ../clients/common/nm-client-utils.c:359 ../libnm-glib/nm-device.c:1859
#: ../libnm/nm-device.c:1437
msgid "Unknown"
msgstr ""

#: ../clients/common/nm-client-utils.c:288
msgid "No reason given"
msgstr ""

#: ../clients/common/nm-client-utils.c:290
msgid "Device is now managed"
msgstr ""

#: ../clients/common/nm-client-utils.c:291
msgid "Device is now unmanaged"
msgstr ""

#: ../clients/common/nm-client-utils.c:292
msgid "The device could not be readied for configuration"
msgstr ""

#: ../clients/common/nm-client-utils.c:293
msgid ""
"IP configuration could not be reserved (no available address, timeout, etc.)"
msgstr ""

#: ../clients/common/nm-client-utils.c:294
msgid "The IP configuration is no longer valid"
msgstr ""

#: ../clients/common/nm-client-utils.c:295
msgid "Secrets were required, but not provided"
msgstr ""

#: ../clients/common/nm-client-utils.c:296
msgid "802.1X supplicant disconnected"
msgstr ""

#: ../clients/common/nm-client-utils.c:297
msgid "802.1X supplicant configuration failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:298
msgid "802.1X supplicant failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:299
msgid "802.1X supplicant took too long to authenticate"
msgstr ""

#: ../clients/common/nm-client-utils.c:300
msgid "PPP service failed to start"
msgstr ""

#: ../clients/common/nm-client-utils.c:301
msgid "PPP service disconnected"
msgstr ""

#: ../clients/common/nm-client-utils.c:302
msgid "PPP failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:303
msgid "DHCP client failed to start"
msgstr ""

#: ../clients/common/nm-client-utils.c:304
msgid "DHCP client error"
msgstr ""

#: ../clients/common/nm-client-utils.c:305
msgid "DHCP client failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:306
msgid "Shared connection service failed to start"
msgstr ""

#: ../clients/common/nm-client-utils.c:307
msgid "Shared connection service failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:308
msgid "AutoIP service failed to start"
msgstr ""

#: ../clients/common/nm-client-utils.c:309
msgid "AutoIP service error"
msgstr ""

#: ../clients/common/nm-client-utils.c:310
msgid "AutoIP service failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:311
msgid "The line is busy"
msgstr ""

#: ../clients/common/nm-client-utils.c:312
msgid "No dial tone"
msgstr ""

#: ../clients/common/nm-client-utils.c:313
msgid "No carrier could be established"
msgstr ""

#: ../clients/common/nm-client-utils.c:314
msgid "The dialing request timed out"
msgstr ""

#: ../clients/common/nm-client-utils.c:315
msgid "The dialing attempt failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:316
msgid "Modem initialization failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:317
#, fuzzy
msgid "Failed to select the specified APN"
msgstr "Privaatvõtme dešifreerimine nurjus: %d."

#: ../clients/common/nm-client-utils.c:318
msgid "Not searching for networks"
msgstr ""

#: ../clients/common/nm-client-utils.c:319
msgid "Network registration denied"
msgstr ""

#: ../clients/common/nm-client-utils.c:320
msgid "Network registration timed out"
msgstr ""

#: ../clients/common/nm-client-utils.c:321
msgid "Failed to register with the requested network"
msgstr ""

#: ../clients/common/nm-client-utils.c:322
msgid "PIN check failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:323
msgid "Necessary firmware for the device may be missing"
msgstr ""

#: ../clients/common/nm-client-utils.c:324
msgid "The device was removed"
msgstr ""

#: ../clients/common/nm-client-utils.c:325
msgid "NetworkManager went to sleep"
msgstr ""

#: ../clients/common/nm-client-utils.c:326
msgid "The device's active connection disappeared"
msgstr ""

#: ../clients/common/nm-client-utils.c:327
msgid "Device disconnected by user or client"
msgstr ""

#: ../clients/common/nm-client-utils.c:328
msgid "Carrier/link changed"
msgstr ""

#: ../clients/common/nm-client-utils.c:329
msgid "The device's existing connection was assumed"
msgstr ""

#: ../clients/common/nm-client-utils.c:330
msgid "The supplicant is now available"
msgstr ""

#: ../clients/common/nm-client-utils.c:331
msgid "The modem could not be found"
msgstr ""

#: ../clients/common/nm-client-utils.c:332
msgid "The Bluetooth connection failed or timed out"
msgstr ""

#: ../clients/common/nm-client-utils.c:333
msgid "GSM Modem's SIM card not inserted"
msgstr ""

#: ../clients/common/nm-client-utils.c:334
msgid "GSM Modem's SIM PIN required"
msgstr ""

#: ../clients/common/nm-client-utils.c:335
msgid "GSM Modem's SIM PUK required"
msgstr ""

#: ../clients/common/nm-client-utils.c:336
msgid "GSM Modem's SIM wrong"
msgstr ""

#: ../clients/common/nm-client-utils.c:337
msgid "InfiniBand device does not support connected mode"
msgstr ""

#: ../clients/common/nm-client-utils.c:338
msgid "A dependency of the connection failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:339
msgid "A problem with the RFC 2684 Ethernet over ADSL bridge"
msgstr ""

#: ../clients/common/nm-client-utils.c:340
msgid "ModemManager is unavailable"
msgstr ""

#: ../clients/common/nm-client-utils.c:341
msgid "The Wi-Fi network could not be found"
msgstr ""

#: ../clients/common/nm-client-utils.c:342
msgid "A secondary connection of the base connection failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:343
msgid "DCB or FCoE setup failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:344
msgid "teamd control failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:345
msgid "Modem failed or no longer available"
msgstr ""

#: ../clients/common/nm-client-utils.c:346
msgid "Modem now ready and available"
msgstr ""

#: ../clients/common/nm-client-utils.c:347
msgid "SIM PIN was incorrect"
msgstr ""

#: ../clients/common/nm-client-utils.c:348
msgid "New connection activation was enqueued"
msgstr ""

#: ../clients/common/nm-client-utils.c:349
msgid "The device's parent changed"
msgstr ""

#: ../clients/common/nm-client-utils.c:350
msgid "The device parent's management changed"
msgstr ""

#: ../clients/common/nm-client-utils.c:351
msgid "Open vSwitch database connection failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:352
msgid "A duplicate IP address was detected"
msgstr ""

#: ../clients/common/nm-client-utils.c:353
msgid "The selected IP method is not supported"
msgstr ""

#: ../clients/common/nm-client-utils.c:354
msgid "Failed to configure SR-IOV parameters"
msgstr ""

#: ../clients/common/nm-client-utils.c:360
msgid "Unknown reason"
msgstr ""

#: ../clients/common/nm-client-utils.c:361
msgid "The connection was disconnected"
msgstr ""

#: ../clients/common/nm-client-utils.c:362
msgid "Disconnected by user"
msgstr ""

#: ../clients/common/nm-client-utils.c:363
msgid "The base network connection was interrupted"
msgstr ""

#: ../clients/common/nm-client-utils.c:364
msgid "The VPN service stopped unexpectedly"
msgstr ""

#: ../clients/common/nm-client-utils.c:365
msgid "The VPN service returned invalid configuration"
msgstr ""

#: ../clients/common/nm-client-utils.c:366
msgid "The connection attempt timed out"
msgstr ""

#: ../clients/common/nm-client-utils.c:367
msgid "The VPN service did not start in time"
msgstr ""

#: ../clients/common/nm-client-utils.c:368
msgid "The VPN service failed to start"
msgstr ""

#: ../clients/common/nm-client-utils.c:369
msgid "No valid secrets"
msgstr ""

#: ../clients/common/nm-client-utils.c:370
msgid "Invalid secrets"
msgstr ""

#: ../clients/common/nm-client-utils.c:371
msgid "The connection was removed"
msgstr ""

#: ../clients/common/nm-client-utils.c:372
msgid "Master connection failed"
msgstr ""

#: ../clients/common/nm-client-utils.c:373
#, fuzzy
msgid "Could not create a software link"
msgstr "Sertifikaati ei saa dešifreerida: %s"

#: ../clients/common/nm-client-utils.c:374
msgid "The device disappeared"
msgstr ""

#: ../clients/common/nm-meta-setting-access.c:492
#, c-format
msgid "field '%s' has to be alone"
msgstr ""

#: ../clients/common/nm-meta-setting-access.c:507
#, c-format
msgid "invalid field '%s%s%s%s%s'; %s%s%s"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:99
#: ../clients/common/nm-meta-setting-desc.c:161
#, c-format
msgid "invalid prefix '%s'; <1-%d> allowed"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:107
#, c-format
msgid "invalid IP address: %s"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:133
msgid ""
"The valid syntax is: 'ip[/prefix] [next-hop] [metric] [attribute=val]... [,"
"ip[/prefix] ...]'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:172
#, c-format
msgid "the next hop ('%s') must be first"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:178
#, c-format
msgid "the metric ('%s') must be before attributes"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:227
#, c-format
msgid "invalid route: %s. %s"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:239
msgid "default route cannot be added (NetworkManager handles it by itself)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:446
#, c-format
msgid "invalid priority map '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:453
#: ../clients/common/nm-meta-setting-desc.c:459
#, c-format
msgid "priority '%s' is not valid (<0-%ld>)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:511
#, c-format
msgid "cannot read pac-script from file '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:518
#, c-format
msgid "file '%s' contains non-valid utf-8"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:531
#, c-format
msgid "'%s' does not contain a valid PAC Script"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:534
#, c-format
msgid "Not a valid PAC Script"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:588
#, c-format
msgid "cannot read team config from file '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:595
#, c-format
msgid "team config file '%s' contains non-valid utf-8"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:607
#, c-format
msgid "'%s' does not contain a valid team configuration"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:610
#, c-format
msgid "team configuration must be a JSON object"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:731
#: ../clients/tui/nmt-mtu-entry.c:84
msgid "(default)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:885
msgid "auto"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1037
#, c-format
msgid "%s (%s)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1180
#: ../clients/common/nm-meta-setting-desc.c:1184
msgid "'%s' is out of range [%"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1189
#, c-format
msgid "'%s' is not a valid number"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1243
#, c-format
msgid "'%s' is out of range [0, %u]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1286
#, c-format
msgid "'%s' is not a valid Ethernet MAC"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1391
#, c-format
msgid "invalid option '%s', use a combination of [%s]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1396 ../libnm-core/nm-keyfile.c:780
#, c-format
msgid "invalid option '%s', use one of [%s]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1515
#, c-format
msgid "%d (key)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1517
#, c-format
msgid "%d (passphrase)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1520
#, c-format
msgid "%d (unknown)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1552
msgid "0 (NONE)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1558
msgid "REORDER_HEADERS, "
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1560
msgid "GVRP, "
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1562
msgid "LOOSE_BINDING, "
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1564
msgid "MVRP, "
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1604
msgid "0 (none)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1610
msgid "agent-owned, "
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1612
msgid "not saved, "
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1614
msgid "not required, "
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1679
#, c-format
msgid "'%s' is not valid; use <option>=<value>"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1718
msgid "no item to remove"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1722
#, c-format
msgid "index '%d' is not in range <0-%d>"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1737
#, c-format
msgid "invalid option '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1739
msgid "missing option"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1763
#, c-format
msgid "'%s' is not a valid MAC"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1790
#: ../clients/common/nm-meta-setting-desc.c:1887
#: ../clients/common/nm-meta-setting-desc.c:4855 ../src/nm-config.c:547
#, c-format
msgid "'%s' is not valid"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1831
#, c-format
msgid "'%u' flags are not valid; use combination of %s"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1867
#, c-format
msgid "'%s' is not a valid number (or out of range)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1985
#, c-format
msgid "'%s' is not a valid hex character"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2268
#, c-format
msgid "the property doesn't contain EAP method '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2291
#, c-format
msgid "the property doesn't contain alternative subject match '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2317
#, c-format
msgid "the property doesn't contain \"phase2\" alternative subject match '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2439
#, c-format
msgid ""
"Enter a list of bonding options formatted as:\n"
"  option = <value>, option = <value>,... \n"
"Valid options are: %s\n"
"'mode' can be provided as a name or a number:\n"
"balance-rr    = 0\n"
"active-backup = 1\n"
"balance-xor   = 2\n"
"broadcast     = 3\n"
"802.3ad       = 4\n"
"balance-tlb   = 5\n"
"balance-alb   = 6\n"
"\n"
"Example: mode=2,miimon=120\n"
msgstr ""

#. Don't allow setting type unless the connection is brand new.
#. * Just because it's a bad idea and the user wouldn't probably want that.
#. * No technical reason, really.
#. * Also, using uuid to see if the connection is brand new is a bit
#. * hacky: we can not see if the type is already set, because
#. * nmc_setting_set_property() is called only after the property
#. * we're setting (type) has been removed.
#: ../clients/common/nm-meta-setting-desc.c:2502
#, c-format
msgid "Can not change the connection type"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2605
#, c-format
msgid "the property doesn't contain permission '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2626
#, c-format
msgid "'%s' is not valid master; use ifname or connection UUID"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2723
#, c-format
msgid "the value '%s' is not a valid UUID"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2730
#, c-format
msgid "the property doesn't contain UUID '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2799
msgid "0 (disabled)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2805
msgid "enabled, "
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2807
msgid "advertise, "
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2809
msgid "willing, "
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2931
#, c-format
msgid "'%s' is not a valid DCB flag"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2960
msgid "must contain 8 comma-separated numbers"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2976
#, c-format
msgid "'%s' not a number between 0 and %u (inclusive) or %u"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2979
#, c-format
msgid "'%s' not a number between 0 and %u (inclusive)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3000
#, c-format
msgid "changes will have no effect until '%s' includes 1 (enabled)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3055
#, c-format
msgid "bandwidth percentages must total 100%%"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3128
#: ../clients/common/nm-meta-setting-desc.c:3134
msgid "SIM operator ID must be a 5 or 6 number MCCMNC code"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3158
#, c-format
msgid "'%s' is not a valid IBoIP P_Key"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3181
msgid "default"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3320
#: ../clients/common/nm-meta-setting-desc.c:3337
#, c-format
msgid "invalid IPv4 address '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3343
#: ../clients/common/nm-meta-setting-desc.c:3587
#, c-format
msgid "the property doesn't contain DNS server '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3381
#: ../clients/common/nm-meta-setting-desc.c:3625
#, c-format
msgid "the property doesn't contain DNS search domain '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3418
#: ../clients/common/nm-meta-setting-desc.c:3662
#, c-format
msgid "the property doesn't contain DNS option '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3461
#: ../clients/common/nm-meta-setting-desc.c:3711
#, c-format
msgid "the property doesn't contain IP address '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3481
#: ../clients/common/nm-meta-setting-desc.c:3730
#, c-format
msgid "invalid gateway address '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3520
#: ../clients/common/nm-meta-setting-desc.c:3771
#, c-format
msgid "the property doesn't contain route '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3564
#: ../clients/common/nm-meta-setting-desc.c:3581
#, c-format
msgid "invalid IPv6 address '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3833
#, c-format
msgid "the property doesn't contain interface name '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3870
#, c-format
msgid "'%s' is not a valid channel; use <1-13>"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3962
msgid "The valid syntax is: vf [attribute=value]... [,vf [attribute=value]...]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3984
msgid ""
"The valid syntax is: '[root | parent <handle>] [handle <handle>] <qdisc>'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4008
#, c-format
msgid "the property doesn't contain vf with index %u"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4035
#, c-format
msgid "the property doesn't contain qdisc '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4089
msgid ""
"The valid syntax is: '[root | parent <handle>] [handle <handle>] <tfilter>'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4112
#, c-format
msgid "the property doesn't contain tfilter '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4179
#, c-format
msgid "the property doesn't contain string '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4254
#: ../clients/common/nm-meta-setting-desc.c:4328
#, c-format
msgid "the property doesn't contain link watcher '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4434
#, c-format
msgid "only one mapping at a time is supported; taking the first one (%s)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4442
#, c-format
msgid "the property doesn't contain mapping '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4450
msgid "no priority to remove"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4454
#, c-format
msgid "index '%d' is not in the range of <0-%d>"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4523
#, c-format
msgid "'%s' cannot be empty"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4562
#: ../clients/common/nm-meta-setting-desc.c:4693
#: ../libnm-core/nm-setting-sriov.c:446 ../libnm-core/nm-setting-wired.c:662
#: ../libnm-core/nm-setting-wireless.c:857
#: ../libnm-core/nm-setting-wireless.c:869 ../libnm-util/nm-setting-wired.c:645
#: ../libnm-util/nm-setting-wireless.c:858
#: ../libnm-util/nm-setting-wireless.c:872
#, c-format
msgid "'%s' is not a valid MAC address"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4568
#: ../clients/common/nm-meta-setting-desc.c:4699
#, c-format
msgid "the property doesn't contain MAC address '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4586
#, c-format
msgid "'%s' is not valid; 2 or 3 strings should be provided"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4600
#, c-format
msgid "'%s' string value should consist of 1 - 199 characters"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4632
#, c-format
msgid ""
"Enter a list of S/390 options formatted as:\n"
"  option = <value>, option = <value>,...\n"
"Valid options are: %s\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4666
#, c-format
msgid "'%s' is not a valid channel"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4672
#, c-format
msgid "'%ld' is not a valid channel"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4755
#: ../clients/common/nm-meta-setting-desc.c:4791
#: ../clients/common/nm-meta-setting-desc.c:4827
#, c-format
msgid "the property doesn't contain protocol '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4864
#, c-format
msgid ""
"'%s' not compatible with %s '%s', please change the key or set the right %s "
"first."
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4874
#, c-format
msgid "WEP key is guessed to be of '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4879
#, c-format
msgid "WEP key index set to '%d'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4918
#, c-format
msgid "'%s' is not compatible with '%s' type, please change or delete the key."
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4928
#, c-format
msgid "'%s' is not a valid PSK"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4980
#, c-format
msgid "'%s' is not valid; use 'on', 'off', or 'ignore'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5039
msgid "Bonding primary interface [none]"
msgstr ""

#. this is a virtual property, only needed during "ask" mode.
#: ../clients/common/nm-meta-setting-desc.c:5046
msgid "Bonding monitoring mode"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5055
msgid "Bonding miimon [100]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5063
msgid "Bonding downdelay [0]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5071
msgid "Bonding updelay [0]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5079
msgid "Bonding arp-interval [0]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5087
msgid "Bonding arp-ip-target [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5095
msgid "LACP rate ('slow' or 'fast') [slow]"
msgstr ""

#. macro that returns @func as const (gboolean(*)(NMSetting*)) type, but checks
#. * that the actual type is (gboolean(*)(type *)).
#. macro that returns @func as const (guint32(*)(NMSetting*)) type, but checks
#. * that the actual type is (guint32(*)(type *)).
#: ../clients/common/nm-meta-setting-desc.c:5212
msgid ""
"nmcli can accepts both direct JSON configuration data and a file name "
"containing the configuration. In the latter case the file is read and the "
"contents is put into this property.\n"
"\n"
"Examples: set team.config { \"device\": \"team0\", \"runner\": {\"name\": "
"\"roundrobin\"}, \"ports\": {\"eth1\": {}, \"eth2\": {}} }\n"
"          set team.config /etc/my-team.conf\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5220
msgid ""
"Enter a list of link watchers formatted as dictionaries where the keys are "
"teamd properties. Dictionary pairs are in the form: key=value and pairs are "
"separated by ' '. Dictionaries are separated with ','.\n"
"The keys allowed/required in the dictionary change on the basis of the link "
"watcher type, while the only property common to all the link watchers is  "
"'name'*, which defines the link watcher to be specified.\n"
"\n"
"Properties available for the 'ethtool' link watcher:\n"
"  'delay-up', 'delay-down'\n"
"\n"
"Properties available for the 'nsna_ping' link watcher:\n"
"  'init-wait', 'interval', 'missed-max', 'target-host'*\n"
"\n"
"Properties available for the 'arp_ping' include all the ones for 'nsna_ping' "
"and:\n"
"  'source-host'*, 'validate-active', 'validate-inactive', 'send-always'.\n"
"\n"
"Properties flagged with a '*' are mandatory.\n"
"\n"
"Example:\n"
"   name=arp_ping source-host=172.16.1.1 target-host=172.16.1.254, "
"name=ethtool delay-up=3\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5270
msgid ""
"Enter file path to CA certificate (optionally prefixed with file://).\n"
"  [file://]<file path>\n"
"Note that nmcli does not support specifying certificates as raw blob data.\n"
"Example: /home/cimrman/cacert.crt\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5304
msgid ""
"Enter file path to client certificate (optionally prefixed with file://).\n"
"  [file://]<file path>\n"
"Note that nmcli does not support specifying certificates as raw blob data.\n"
"Example: /home/cimrman/jara.crt\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5361
msgid ""
"Enter file path to CA certificate for inner authentication (optionally "
"prefixed\n"
"with file://).\n"
"  [file://]<file path>\n"
"Note that nmcli does not support specifying certificates as raw blob data.\n"
"Example: /home/cimrman/ca-zweite-phase.crt\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5396
msgid ""
"Enter file path to client certificate for inner authentication (optionally "
"prefixed\n"
"with file://).\n"
"  [file://]<file path>\n"
"Note that nmcli does not support specifying certificates as raw blob data.\n"
"Example: /home/cimrman/jara-zweite-phase.crt\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5423
msgid ""
"Enter bytes as a list of hexadecimal values.\n"
"Two formats are accepted:\n"
"(a) a string of hexadecimal digits, where each two digits represent one "
"byte\n"
"(b) space-separated list of bytes written as hexadecimal digits (with "
"optional 0x/0X prefix, and optional leading 0).\n"
"\n"
"Examples: ab0455a6ea3a74C2\n"
"          ab 4 55 0xa6 ea 3a 74 C2\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5440
#: ../clients/common/nm-meta-setting-desc.c:5458
msgid ""
"Enter path to a private key and the key password (if not set yet):\n"
"  [file://]<file path> [<password>]\n"
"Note that nmcli does not support specifying private key as raw blob data.\n"
"Example: /home/cimrman/jara-priv-key Dardanely\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5497
#: ../clients/common/nm-secret-agent-simple.c:265
#: ../clients/common/nm-secret-agent-simple.c:363
#: ../clients/tui/nmt-page-dsl.c:66 ../clients/tui/nmt-page-wifi.c:332
msgid "Username"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5503
#: ../clients/common/nm-meta-setting-desc.c:5687
#: ../clients/common/nm-meta-setting-desc.c:6060
#: ../clients/common/nm-meta-setting-desc.c:6720
msgid "Password [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5549
msgid "Bluetooth device address"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5594
#: ../clients/common/nm-meta-setting-desc.c:6114
#: ../clients/common/nm-meta-setting-desc.c:7446
#: ../clients/common/nm-meta-setting-desc.c:7484
#: ../clients/common/nm-meta-setting-desc.c:7621
#: ../clients/common/nm-meta-setting-desc.c:7839
msgid "MAC [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5600
msgid "Enable STP [no]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5606
msgid "STP priority [32768]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5612
msgid "Forward delay [15]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5618
msgid "Hello time [2]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5624
msgid "Max age [20]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5630
msgid "MAC address ageing time [300]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5636
msgid "Group forward mask [0]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5642
msgid "Enable IGMP snooping [no]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5654
msgid "Bridge port priority [32]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5660
msgid "Bridge port STP path cost [100]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5666
msgid "Hairpin [no]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5681
#: ../clients/common/nm-meta-setting-desc.c:6054
#: ../clients/common/nm-meta-setting-desc.c:7336
msgid "Username [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5784
msgid ""
"Enter a list of user permissions. This is a list of user names formatted "
"as:\n"
"  [user:]<user name 1>, [user:]<user name 2>,...\n"
"The items can be separated by commas or spaces.\n"
"\n"
"Example: alice bob charlie\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5826
msgid ""
"Enter secondary connections that should be activated when this connection "
"is\n"
"activated. Connections can be specified either by UUID or ID (name). nmcli\n"
"transparently translates names to UUIDs. Note that NetworkManager only "
"supports\n"
"VPNs as secondary connections at the moment.\n"
"The items can be separated by commas or spaces.\n"
"\n"
"Example: private-openvpn, fe6ba5d8-c2fc-4aae-b2e3-97efddd8d9a7\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5843
msgid ""
"Enter a value which indicates whether the connection is subject to a data\n"
"quota, usage costs or other limitations. Accepted options are:\n"
"'true','yes','on' to set the connection as metered\n"
"'false','no','off' to set the connection as not metered\n"
"'unknown' to let NetworkManager choose a value using some heuristics\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6071
msgid "APN"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6123
#: ../clients/common/nm-meta-setting-desc.c:7509
#: ../clients/common/nm-meta-setting-desc.c:7655
msgid "MTU [auto]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6142
msgid "P_KEY [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6151
msgid "Parent interface [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6174
msgid ""
"Enter a list of IPv4 addresses of DNS servers.\n"
"\n"
"Example: 8.8.8.8, 8.8.4.4\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6206
msgid "IPv4 address (IP[/plen]) [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6208
msgid ""
"Enter a list of IPv4 addresses formatted as:\n"
"  ip[/prefix], ip[/prefix],...\n"
"Missing prefix is regarded as prefix of 32.\n"
"\n"
"Example: 192.168.1.5/24, 10.0.0.11/24\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6221
msgid "IPv4 gateway [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6229
msgid ""
"Enter a list of IPv4 routes formatted as:\n"
"  ip[/prefix] [next-hop] [metric],...\n"
"\n"
"Missing prefix is regarded as a prefix of 32.\n"
"Missing next-hop is regarded as 0.0.0.0.\n"
"Missing metric means default (NM/kernel will set a default value).\n"
"\n"
"Examples: 192.168.2.0/24 192.168.2.1 3, 10.1.0.0/16 10.0.0.254\n"
"          10.1.2.0/24\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6331
msgid ""
"Enter a list of IPv6 addresses of DNS servers.  If the IPv6 configuration "
"method is 'auto' these DNS servers are appended to those (if any) returned "
"by automatic configuration.  DNS servers cannot be used with the 'shared' or "
"'link-local' IPv6 configuration methods, as there is no upstream network. In "
"all other IPv6 configuration methods, these DNS servers are used as the only "
"DNS servers for this connection.\n"
"\n"
"Example: 2607:f0d0:1002:51::4, 2607:f0d0:1002:51::1\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6369
msgid "IPv6 address (IP[/plen]) [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6371
msgid ""
"Enter a list of IPv6 addresses formatted as:\n"
"  ip[/prefix], ip[/prefix],...\n"
"Missing prefix is regarded as prefix of 128.\n"
"\n"
"Example: 2607:f0d0:1002:51::4/64, 1050:0:0:0:5:600:300c:326b\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6384
msgid "IPv6 gateway [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6392
msgid ""
"Enter a list of IPv6 routes formatted as:\n"
"  ip[/prefix] [next-hop] [metric],...\n"
"\n"
"Missing prefix is regarded as a prefix of 128.\n"
"Missing next-hop is regarded as \"::\".\n"
"Missing metric means default (NM/kernel will set a default value).\n"
"\n"
"Examples: 2001:db8:beef:2::/64 2001:db8:beef::2, 2001:db8:beef:3::/64 2001:"
"db8:beef::3 2\n"
"          abbe::/64 55\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6497
#: ../clients/common/nm-meta-setting-desc.c:7369
msgid "Parent device [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6503
msgid "Local endpoint [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6510
#: ../clients/common/nm-meta-setting-desc.c:7389
msgid "Remote"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6555
msgid "MACsec parent device or connection UUID"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6576
msgid "Enable encryption [yes]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6582
#: ../clients/common/nm-secret-agent-simple.c:835
msgid "MKA CAK"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6592
msgid "MKA_CKN"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6598
msgid "SCI port [1]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6624
msgid "MACVLAN parent device or connection UUID"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6645
msgid "Tap [no]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6671
#: ../clients/common/nm-meta-setting-desc.c:7576
#: ../clients/tui/nmt-page-wifi.c:224
msgid "SSID"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6680
msgid "OLPC Mesh channel [1]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6689
msgid "DHCP anycast MAC address [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6701
msgid "PPPoE parent device"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6707
msgid "Service [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6714
msgid "PPPoE username"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6888
msgid "Browser only [no]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6894
msgid "PAC URL"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6900
msgid "PAC script"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6935
#: ../clients/common/nm-meta-setting-desc.c:7084
msgid "Team JSON configuration [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7239
msgid "User ID [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7245
msgid "Group ID [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7251
msgid "Enable PI [no]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7257
msgid "Enable VNET header [no]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7263
msgid "Enable multi queue [no]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7276
msgid "VLAN parent device or connection UUID"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7283
msgid "VLAN ID (<0-4094>)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7289
msgid "VLAN flags (<0-7>) [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7298
msgid "Ingress priority maps [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7308
msgid "Egress priority maps [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7376
msgid "VXLAN ID"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7382
msgid "Local address [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7395
msgid "Minimum source port [0]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7401
msgid "Maximum source port [0]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7407
msgid "Destination port [8472]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7453
msgid "WiMAX NSP name"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7490
#: ../clients/common/nm-meta-setting-desc.c:7626
msgid "Cloned MAC [none]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7517
msgid ""
"Enter a list of subchannels (comma or space separated).\n"
"\n"
"Example: 0.0.0e20 0.0.0e21 0.0.0e22\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7785
msgid ""
"Enter the type of WEP keys. The accepted values are: 0 or unknown, 1 or key, "
"and 2 or passphrase.\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7847
msgid "Short address (<0x0000-0xffff>)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7863
msgid "PAN Identifier (<0x0000-0xffff>)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7878
msgid "Page (<default|0-31>)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7892
msgid "Channel (<default|0-26>)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7913
msgid "IEEE 802.15.4 (WPAN) parent device or connection UUID"
msgstr ""

#. ***************************************************************************
#: ../clients/common/nm-meta-setting-desc.c:8040
msgid "802-1x settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8041
#: ../src/devices/adsl/nm-device-adsl.c:133
msgid "ADSL connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8042
#, fuzzy
msgid "bluetooth connection"
msgstr "IV määramine dešifreerimiseks nurjus: %s / %s."

#: ../clients/common/nm-meta-setting-desc.c:8043
msgid "Bond device"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8044
msgid "Bridge device"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8045
msgid "Bridge port"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8046
msgid "CDMA mobile broadband connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8047
msgid "General settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8048
msgid "DCB settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8049
msgid "Dummy settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8050
msgid "Ethtool settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8051
msgid "Generic settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8052
msgid "GSM mobile broadband connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8053
#: ../src/devices/nm-device-infiniband.c:172
msgid "InfiniBand connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8054
msgid "IPv4 protocol"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8055
msgid "IPv6 protocol"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8056
msgid "IP-tunnel settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8057
msgid "MACsec connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8058
msgid "macvlan connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8059
msgid "Match"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8060
msgid "OLPC Mesh connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8061
msgid "Open vSwitch bridge settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8062
msgid "Open vSwitch interface settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8063
msgid "Open vSwitch patch interface settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8064
msgid "Open vSwitch port settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8065
msgid "PPP settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8066
msgid "PPPoE"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8067
msgid "Proxy"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8068
msgid "Serial settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8069
msgid "SR-IOV settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8070
msgid "Traffic controls"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8071
msgid "Team device"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8072
msgid "Team port"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8073
msgid "Tun device"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8074
msgid "User settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8075
#: ../src/devices/nm-device-vlan.c:400
msgid "VLAN connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8076 ../src/nm-manager.c:5488
msgid "VPN connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8077
#: ../src/devices/nm-device-vxlan.c:371
msgid "VXLAN connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8078
msgid "WiMAX connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8079
msgid "Wired Ethernet"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8080
msgid "Wi-Fi connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8081
msgid "Wi-Fi security settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8082
msgid "WPAN settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8083
msgid "6LOWPAN settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8434
msgid "name"
msgstr ""

#: ../clients/common/nm-polkit-listener.c:239
msgid "An authentication session is already underway."
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:271
#: ../clients/common/nm-secret-agent-simple.c:311
#: ../clients/common/nm-secret-agent-simple.c:339
#: ../clients/common/nm-secret-agent-simple.c:375
#: ../clients/common/nm-secret-agent-simple.c:820
#: ../clients/common/nm-secret-agent-simple.c:852
#: ../clients/common/nm-secret-agent-simple.c:874
#: ../clients/common/nm-vpn-helpers.c:119
#: ../clients/common/nm-vpn-helpers.c:123
#: ../clients/common/nm-vpn-helpers.c:129
#: ../clients/common/nm-vpn-helpers.c:134 ../clients/tui/nmt-page-dsl.c:75
#: ../clients/tui/nmt-page-wifi.c:277 ../clients/tui/nmt-page-wifi.c:308
#: ../clients/tui/nmt-page-wifi.c:341
msgid "Password"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:281
msgid "Identity"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:287
msgid "Private key password"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:326
#: ../clients/tui/nmt-page-wifi.c:289
msgid "Key"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:369
#: ../clients/tui/nmt-page-dsl.c:78
msgid "Service"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:548
#: ../clients/common/nm-secret-agent-simple.c:816
#: ../clients/common/nm-secret-agent-simple.c:848
#: ../clients/common/nm-secret-agent-simple.c:870
#: ../clients/common/nm-secret-agent-simple.c:892
#, c-format
msgid "A password is required to connect to '%s'."
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:785
msgid "Authentication required by wireless network"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:786
#, c-format
msgid ""
"Passwords or encryption keys are required to access the wireless network "
"'%s'."
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:790
msgid "Wired 802.1X authentication"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:791
#, c-format
msgid "Secrets are required to access the wired network '%s'"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:796
msgid "DSL authentication"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:797
#, c-format
msgid "Secrets are required for the DSL connection '%s'"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:805
msgid "PIN code required"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:806
msgid "PIN code is needed for the mobile broadband device"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:809
msgid "PIN"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:815
#: ../clients/common/nm-secret-agent-simple.c:847
#: ../clients/common/nm-secret-agent-simple.c:869
msgid "Mobile broadband network password"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:829
#, c-format
msgid "Secrets are required to access the MACsec network '%s'"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:833
msgid "MACsec PSK authentication"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:841
msgid "MACsec EAP authentication"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:882
msgid "VPN password required"
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:48
#, c-format
msgid "unknown VPN plugin \"%s\""
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:59
#, c-format
msgid "cannot load legacy-only VPN plugin \"%s\" for \"%s\""
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:64
#, c-format
msgid ""
"cannot load VPN plugin \"%s\" due to missing \"%s\". Missing client plugin?"
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:69
#, c-format
msgid "failed to load VPN plugin \"%s\": %s"
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:124
msgid "Certificate password"
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:125
msgid "HTTP proxy password"
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:130
#: ../clients/common/nm-vpn-helpers.c:135
msgid "Group password"
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:139 ../clients/tui/nmt-page-ip4.c:143
#: ../clients/tui/nmt-page-ip6.c:143
msgid "Gateway"
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:140
msgid "Cookie"
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:141
msgid "Gateway certificate hash"
msgstr ""

#. Generated file. Do not edit.
#: ../clients/common/settings-docs.h.in:3
msgid ""
"If given, specifies the parent interface name or parent connection UUID from "
"which this 6LowPAN interface should be created."
msgstr ""

#: ../clients/common/settings-docs.h.in:4
msgid "Channel on which the mesh network to join is located."
msgstr ""

#: ../clients/common/settings-docs.h.in:5
msgid ""
"Anycast DHCP MAC address used when requesting an IP address via DHCP. The "
"specific anycast address used determines which DHCP server class answers the "
"request."
msgstr ""

#: ../clients/common/settings-docs.h.in:6
msgid "SSID of the mesh network to join."
msgstr ""

#: ../clients/common/settings-docs.h.in:7
msgid ""
"802.11 frequency band of the network.  One of \"a\" for 5GHz 802.11a or \"bg"
"\" for 2.4GHz 802.11.  This will lock associations to the Wi-Fi network to "
"the specific band, i.e. if \"a\" is specified, the device will not associate "
"with the same network in the 2.4GHz band even if the network's settings are "
"compatible.  This setting depends on specific driver capability and may not "
"work with all drivers."
msgstr ""

#: ../clients/common/settings-docs.h.in:8
msgid ""
"If specified, directs the device to only associate with the given access "
"point.  This capability is highly driver dependent and not supported by all "
"devices.  Note: this property does not control the BSSID used when creating "
"an Ad-Hoc network and is unlikely to in the future."
msgstr ""

#: ../clients/common/settings-docs.h.in:9
msgid ""
"Wireless channel to use for the Wi-Fi connection.  The device will only join "
"(or create for Ad-Hoc networks) a Wi-Fi network on the specified channel.  "
"Because channel numbers overlap between bands, this property also requires "
"the \"band\" property to be set."
msgstr ""

#: ../clients/common/settings-docs.h.in:10
msgid ""
"If specified, request that the device use this MAC address instead. This is "
"known as MAC cloning or spoofing. Beside explicitly specifying a MAC "
"address, the special values \"preserve\", \"permanent\", \"random\" and "
"\"stable\" are supported. \"preserve\" means not to touch the MAC address on "
"activation. \"permanent\" means to use the permanent hardware address of the "
"device. \"random\" creates a random MAC address on each connect. \"stable\" "
"creates a hashed MAC address based on connection.stable-id and a machine "
"dependent key. If unspecified, the value can be overwritten via global "
"defaults, see manual of NetworkManager.conf. If still unspecified, it "
"defaults to \"preserve\" (older versions of NetworkManager may use a "
"different default value). On D-Bus, this field is expressed as \"assigned-"
"mac-address\" or the deprecated \"cloned-mac-address\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:11
#: ../clients/common/settings-docs.h.in:91
msgid ""
"With \"cloned-mac-address\" setting \"random\" or \"stable\", by default all "
"bits of the MAC address are scrambled and a locally-administered, unicast "
"MAC address is created. This property allows to specify that certain bits "
"are fixed. Note that the least significant bit of the first MAC address will "
"always be unset to create a unicast MAC address. If the property is NULL, it "
"is eligible to be overwritten by a default connection setting. If the value "
"is still NULL or an empty string, the default is to create a locally-"
"administered, unicast MAC address. If the value contains one MAC address, "
"this address is used as mask. The set bits of the mask are to be filled with "
"the current MAC address of the device, while the unset bits are subject to "
"randomization. Setting \"FE:FF:FF:00:00:00\" means to preserve the OUI of "
"the current MAC address and only randomize the lower 3 bytes using the "
"\"random\" or \"stable\" algorithm. If the value contains one additional MAC "
"address after the mask, this address is used instead of the current MAC "
"address to fill the bits that shall not be randomized. For example, a value "
"of \"FE:FF:FF:00:00:00 68:F7:28:00:00:00\" will set the OUI of the MAC "
"address to 68:F7:28, while the lower bits are randomized. A value of "
"\"02:00:00:00:00:00 00:00:00:00:00:00\" will create a fully scrambled "
"globally-administered, burned-in MAC address. If the value contains more "
"than one additional MAC addresses, one of them is chosen randomly. For "
"example, \"02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00\" will "
"create a fully scrambled MAC address, randomly locally or globally "
"administered."
msgstr ""

#: ../clients/common/settings-docs.h.in:12
msgid ""
"If TRUE, indicates that the network is a non-broadcasting network that hides "
"its SSID. This works both in infrastructure and AP mode. In infrastructure "
"mode, various workarounds are used for a more reliable discovery of hidden "
"networks, such as probe-scanning the SSID.  However, these workarounds "
"expose inherent insecurities with hidden SSID networks, and thus hidden SSID "
"networks should be used with caution. In AP mode, the created network does "
"not broadcast its SSID. Note that marking the network as hidden may be a "
"privacy issue for you (in infrastructure mode) or client stations (in AP "
"mode), as the explicit probe-scans are distinctly recognizable on the air."
msgstr ""

#: ../clients/common/settings-docs.h.in:13
msgid ""
"If specified, this connection will only apply to the Wi-Fi device whose "
"permanent MAC address matches. This property does not change the MAC address "
"of the device (i.e. MAC spoofing)."
msgstr ""

#: ../clients/common/settings-docs.h.in:14
msgid ""
"A list of permanent MAC addresses of Wi-Fi devices to which this connection "
"should never apply.  Each MAC address should be given in the standard hex-"
"digits-and-colons notation (eg \"00:11:22:33:44:55\")."
msgstr ""

#: ../clients/common/settings-docs.h.in:15
msgid ""
"One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the "
"user has set a global default to randomize and the supplicant supports "
"randomization),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the "
"MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize "
"the MAC address). This property is deprecated for 'cloned-mac-address'. "
"Deprecated: 1"
msgstr ""

#: ../clients/common/settings-docs.h.in:16
msgid ""
"Wi-Fi network mode; one of \"infrastructure\", \"adhoc\" or \"ap\".  If "
"blank, infrastructure is assumed."
msgstr ""

#: ../clients/common/settings-docs.h.in:17
#: ../clients/common/settings-docs.h.in:94
msgid ""
"If non-zero, only transmit packets of the specified size or smaller, "
"breaking larger packets up into multiple Ethernet frames."
msgstr ""

#: ../clients/common/settings-docs.h.in:18
msgid ""
"One of NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2) (disable Wi-Fi power "
"saving), NM_SETTING_WIRELESS_POWERSAVE_ENABLE (3) (enable Wi-Fi power "
"saving), NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1) (don't touch currently "
"configure setting) or NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0) (use the "
"globally configured value). All other values are reserved."
msgstr ""

#: ../clients/common/settings-docs.h.in:19
msgid ""
"If non-zero, directs the device to only use the specified bitrate for "
"communication with the access point.  Units are in Kb/s, ie 5500 = 5.5 Mbit/"
"s.  This property is highly driver dependent and not all devices support "
"setting a static bitrate."
msgstr ""

#: ../clients/common/settings-docs.h.in:20
msgid ""
"A list of BSSIDs (each BSSID formatted as a MAC address like "
"\"00:11:22:33:44:55\") that have been detected as part of the Wi-Fi "
"network.  NetworkManager internally tracks previously seen BSSIDs. The "
"property is only meant for reading and reflects the BSSID list of "
"NetworkManager. The changes you make to this property will not be preserved."
msgstr ""

#: ../clients/common/settings-docs.h.in:21
msgid "SSID of the Wi-Fi network. Must be specified."
msgstr ""

#: ../clients/common/settings-docs.h.in:22
msgid ""
"If non-zero, directs the device to use the specified transmit power. Units "
"are dBm.  This property is highly driver dependent and not all devices "
"support setting a static transmit power."
msgstr ""

#: ../clients/common/settings-docs.h.in:23
msgid ""
"The NMSettingWirelessWakeOnWLan options to enable. Not all devices support "
"all options. May be any combination of NM_SETTING_WIRELESS_WAKE_ON_WLAN_ANY "
"(0x2), NM_SETTING_WIRELESS_WAKE_ON_WLAN_DISCONNECT (0x4), "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_MAGIC (0x8), "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_GTK_REKEY_FAILURE (0x10), "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_EAP_IDENTITY_REQUEST (0x20), "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_4WAY_HANDSHAKE (0x40), "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_RFKILL_RELEASE (0x80), "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_TCP (0x100) or the special values "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_DEFAULT (0x1) (to use global settings) and "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_IGNORE (0x8000) (to disable management of "
"Wake-on-LAN in NetworkManager)."
msgstr ""

#: ../clients/common/settings-docs.h.in:24
msgid ""
"When WEP is used (ie, key-mgmt = \"none\" or \"ieee8021x\") indicate the "
"802.11 authentication algorithm required by the AP here.  One of \"open\" "
"for Open System, \"shared\" for Shared Key, or \"leap\" for Cisco LEAP.  "
"When using Cisco LEAP (ie, key-mgmt = \"ieee8021x\" and auth-alg = \"leap\") "
"the \"leap-username\" and \"leap-password\" properties must be specified."
msgstr ""

#: ../clients/common/settings-docs.h.in:25
msgid ""
"Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the "
"connection.  One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use "
"global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) "
"(disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS "
"if the supplicant and the access point support it) or "
"NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not "
"supported).  When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and "
"no global default is set, FILS will be optionally enabled."
msgstr ""

#: ../clients/common/settings-docs.h.in:26
msgid ""
"A list of group/broadcast encryption algorithms which prevents connections "
"to Wi-Fi networks that do not utilize one of the algorithms in the list.  "
"For maximum compatibility leave this property empty.  Each list element may "
"be one of \"wep40\", \"wep104\", \"tkip\", or \"ccmp\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:27
msgid ""
"Key management used for the connection.  One of \"none\" (WEP), \"ieee8021x"
"\" (Dynamic WEP), \"wpa-none\" (Ad-Hoc WPA-PSK), \"wpa-psk\" (infrastructure "
"WPA-PSK), or \"wpa-eap\" (WPA-Enterprise).  This property must be set for "
"any Wi-Fi connection that uses security."
msgstr ""

#: ../clients/common/settings-docs.h.in:28
msgid ""
"The login password for legacy LEAP connections (ie, key-mgmt = \"ieee8021x\" "
"and auth-alg = \"leap\")."
msgstr ""

#: ../clients/common/settings-docs.h.in:29
msgid "Flags indicating how to handle the \"leap-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:30
msgid ""
"The login username for legacy LEAP connections (ie, key-mgmt = \"ieee8021x\" "
"and auth-alg = \"leap\")."
msgstr ""

#: ../clients/common/settings-docs.h.in:31
msgid ""
"A list of pairwise encryption algorithms which prevents connections to Wi-Fi "
"networks that do not utilize one of the algorithms in the list. For maximum "
"compatibility leave this property empty.  Each list element may be one of "
"\"tkip\" or \"ccmp\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:32
msgid ""
"Indicates whether Protected Management Frames (802.11w) must be enabled for "
"the connection.  One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) (use "
"global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE (1) (disable "
"PMF), NM_SETTING_WIRELESS_SECURITY_PMF_OPTIONAL (2) (enable PMF if the "
"supplicant and the access point support it) or "
"NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (3) (enable PMF and fail if not "
"supported).  When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) and no "
"global default is set, PMF will be optionally enabled."
msgstr ""

#: ../clients/common/settings-docs.h.in:33
msgid ""
"List of strings specifying the allowed WPA protocol versions to use. Each "
"element may be one \"wpa\" (allow WPA) or \"rsn\" (allow WPA2/RSN).  If not "
"specified, both WPA and RSN connections are allowed."
msgstr ""

#: ../clients/common/settings-docs.h.in:34
msgid ""
"Pre-Shared-Key for WPA networks.  If the key is 64-characters long, it must "
"contain only hexadecimal characters and is interpreted as a hexadecimal WPA "
"key.  Otherwise, the key must be between 8 and 63 ASCII characters (as "
"specified in the 802.11i standard) and is interpreted as a WPA passphrase, "
"and is hashed to derive the actual WPA-PSK used when connecting to the Wi-Fi "
"network."
msgstr ""

#: ../clients/common/settings-docs.h.in:35
msgid "Flags indicating how to handle the \"psk\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:36
msgid ""
"Flags indicating how to handle the \"wep-key0\", \"wep-key1\", \"wep-key2\", "
"and \"wep-key3\" properties."
msgstr ""

#: ../clients/common/settings-docs.h.in:37
msgid ""
"Controls the interpretation of WEP keys.  Allowed values are "
"NM_WEP_KEY_TYPE_KEY (1), in which case the key is either a 10- or 26-"
"character hexadecimal string, or a 5- or 13-character ASCII password; or "
"NM_WEP_KEY_TYPE_PASSPHRASE (2), in which case the passphrase is provided as "
"a string and will be hashed using the de-facto MD5 method to derive the "
"actual WEP key."
msgstr ""

#: ../clients/common/settings-docs.h.in:38
msgid ""
"Index 0 WEP key.  This is the WEP key used in most networks.  See the \"wep-"
"key-type\" property for a description of how this key is interpreted."
msgstr ""

#: ../clients/common/settings-docs.h.in:39
msgid ""
"Index 1 WEP key.  This WEP index is not used by most networks.  See the "
"\"wep-key-type\" property for a description of how this key is interpreted."
msgstr ""

#: ../clients/common/settings-docs.h.in:40
msgid ""
"Index 2 WEP key.  This WEP index is not used by most networks.  See the "
"\"wep-key-type\" property for a description of how this key is interpreted."
msgstr ""

#: ../clients/common/settings-docs.h.in:41
msgid ""
"Index 3 WEP key.  This WEP index is not used by most networks.  See the "
"\"wep-key-type\" property for a description of how this key is interpreted."
msgstr ""

#: ../clients/common/settings-docs.h.in:42
msgid ""
"When static WEP is used (ie, key-mgmt = \"none\") and a non-default WEP key "
"index is used by the AP, put that WEP key index here.  Valid values are 0 "
"(default key) through 3.  Note that some consumer access points (like the "
"Linksys WRT54G) number the keys 1 - 4."
msgstr ""

#: ../clients/common/settings-docs.h.in:43
msgid ""
"Flags indicating which mode of WPS is to be used if any. There's little "
"point in changing the default setting as NetworkManager will automatically "
"determine whether it's feasible to start WPS enrollment from the Access "
"Point capabilities. WPS can be disabled by setting this property to a value "
"of 1."
msgstr ""

#: ../clients/common/settings-docs.h.in:44
msgid ""
"List of strings to be matched against the altSubjectName of the certificate "
"presented by the authentication server. If the list is empty, no "
"verification of the server certificate's altSubjectName is performed."
msgstr ""

#: ../clients/common/settings-docs.h.in:45
msgid ""
"Anonymous identity string for EAP authentication methods.  Used as the "
"unencrypted identity with EAP types that support different tunneled identity "
"like EAP-TTLS."
msgstr ""

#: ../clients/common/settings-docs.h.in:46
msgid ""
"A timeout for the authentication. Zero means the global default; if the "
"global default is not set, the authentication timeout is 25 seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:47
msgid ""
"Contains the CA certificate if used by the EAP method specified in the \"eap"
"\" property. Certificate data is specified using a \"scheme\"; two are "
"currently supported: blob and path. When using the blob scheme (which is "
"backwards compatible with NM 0.7.x) this property should be set to the "
"certificate's DER encoded data. When using the path scheme, this property "
"should be set to the full UTF-8 encoded path of the certificate, prefixed "
"with the string \"file://\" and ending with a terminating NUL byte. This "
"property can be unset even if the EAP method supports CA certificates, but "
"this allows man-in-the-middle attacks and is NOT recommended."
msgstr ""

#: ../clients/common/settings-docs.h.in:48
msgid ""
"The password used to access the CA certificate stored in \"ca-cert\" "
"property. Only makes sense if the certificate is stored on a PKCS#11 token "
"that requires a login."
msgstr ""

#: ../clients/common/settings-docs.h.in:49
msgid "Flags indicating how to handle the \"ca-cert-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:50
msgid ""
"UTF-8 encoded path to a directory containing PEM or DER formatted "
"certificates to be added to the verification chain in addition to the "
"certificate specified in the \"ca-cert\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:51
msgid ""
"Contains the client certificate if used by the EAP method specified in the "
"\"eap\" property. Certificate data is specified using a \"scheme\"; two are "
"currently supported: blob and path. When using the blob scheme (which is "
"backwards compatible with NM 0.7.x) this property should be set to the "
"certificate's DER encoded data. When using the path scheme, this property "
"should be set to the full UTF-8 encoded path of the certificate, prefixed "
"with the string \"file://\" and ending with a terminating NUL byte."
msgstr ""

#: ../clients/common/settings-docs.h.in:52
msgid ""
"The password used to access the client certificate stored in \"client-cert\" "
"property. Only makes sense if the certificate is stored on a PKCS#11 token "
"that requires a login."
msgstr ""

#: ../clients/common/settings-docs.h.in:53
msgid "Flags indicating how to handle the \"client-cert-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:54
msgid ""
"Constraint for server domain name. If set, this FQDN is used as a suffix "
"match requirement for dNSName element(s) of the certificate presented by the "
"authentication server.  If a matching dNSName is found, this constraint is "
"met.  If no dNSName values are present, this constraint is matched against "
"SubjectName CN using same suffix match comparison."
msgstr ""

#: ../clients/common/settings-docs.h.in:55
msgid ""
"The allowed EAP method to be used when authenticating to the network with "
"802.1x.  Valid methods are: \"leap\", \"md5\", \"tls\", \"peap\", \"ttls\", "
"\"pwd\", and \"fast\".  Each method requires different configuration using "
"the properties of this setting; refer to wpa_supplicant documentation for "
"the allowed combinations."
msgstr ""

#: ../clients/common/settings-docs.h.in:56
msgid ""
"Identity string for EAP authentication methods.  Often the user's user or "
"login name."
msgstr ""

#: ../clients/common/settings-docs.h.in:57
msgid "UTF-8 encoded file path containing PAC for EAP-FAST."
msgstr ""

#: ../clients/common/settings-docs.h.in:58
msgid ""
"UTF-8 encoded password used for EAP authentication methods. If both the "
"\"password\" property and the \"password-raw\" property are specified, "
"\"password\" is preferred."
msgstr ""

#: ../clients/common/settings-docs.h.in:59
#: ../clients/common/settings-docs.h.in:104
#: ../clients/common/settings-docs.h.in:127
#: ../clients/common/settings-docs.h.in:174
#: ../clients/common/settings-docs.h.in:286
msgid "Flags indicating how to handle the \"password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:60
msgid ""
"Password used for EAP authentication methods, given as a byte array to allow "
"passwords in other encodings than UTF-8 to be used. If both the \"password\" "
"property and the \"password-raw\" property are specified, \"password\" is "
"preferred."
msgstr ""

#: ../clients/common/settings-docs.h.in:61
msgid "Flags indicating how to handle the \"password-raw\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:62
msgid ""
"Specifies authentication flags to use in \"phase 1\" outer authentication "
"using NMSetting8021xAuthFlags options. The individual TLS versions can be "
"explicitly disabled. If a certain TLS disable flag is not set, it is up to "
"the supplicant to allow or forbid it. The TLS options map to "
"tls_disable_tlsv1_x settings. See the wpa_supplicant documentation for more "
"details."
msgstr ""

#: ../clients/common/settings-docs.h.in:63
msgid ""
"Enables or disables in-line provisioning of EAP-FAST credentials when FAST "
"is specified as the EAP method in the \"eap\" property. Recognized values "
"are \"0\" (disabled), \"1\" (allow unauthenticated provisioning), "
"\"2\" (allow authenticated provisioning), and \"3\" (allow both "
"authenticated and unauthenticated provisioning).  See the wpa_supplicant "
"documentation for more details."
msgstr ""

#: ../clients/common/settings-docs.h.in:64
msgid ""
"Forces use of the new PEAP label during key derivation.  Some RADIUS servers "
"may require forcing the new PEAP label to interoperate with PEAPv1.  Set to "
"\"1\" to force use of the new PEAP label.  See the wpa_supplicant "
"documentation for more details."
msgstr ""

#: ../clients/common/settings-docs.h.in:65
msgid ""
"Forces which PEAP version is used when PEAP is set as the EAP method in the "
"\"eap\" property.  When unset, the version reported by the server will be "
"used.  Sometimes when using older RADIUS servers, it is necessary to force "
"the client to use a particular PEAP version.  To do so, this property may be "
"set to \"0\" or \"1\" to force that specific PEAP version."
msgstr ""

#: ../clients/common/settings-docs.h.in:66
msgid ""
"List of strings to be matched against the altSubjectName of the certificate "
"presented by the authentication server during the inner \"phase 2\" "
"authentication. If the list is empty, no verification of the server "
"certificate's altSubjectName is performed."
msgstr ""

#: ../clients/common/settings-docs.h.in:67
msgid ""
"Specifies the allowed \"phase 2\" inner non-EAP authentication methods when "
"an EAP method that uses an inner TLS tunnel is specified in the \"eap\" "
"property.  Recognized non-EAP \"phase 2\" methods are \"pap\", \"chap\", "
"\"mschap\", \"mschapv2\", \"gtc\", \"otp\", \"md5\", and \"tls\". Each "
"\"phase 2\" inner method requires specific parameters for successful "
"authentication; see the wpa_supplicant documentation for more details."
msgstr ""

#: ../clients/common/settings-docs.h.in:68
msgid ""
"Specifies the allowed \"phase 2\" inner EAP-based authentication methods "
"when an EAP method that uses an inner TLS tunnel is specified in the \"eap\" "
"property.  Recognized EAP-based \"phase 2\" methods are \"md5\", "
"\"mschapv2\", \"otp\", \"gtc\", and \"tls\". Each \"phase 2\" inner method "
"requires specific parameters for successful authentication; see the "
"wpa_supplicant documentation for more details."
msgstr ""

#: ../clients/common/settings-docs.h.in:69
msgid ""
"Contains the \"phase 2\" CA certificate if used by the EAP method specified "
"in the \"phase2-auth\" or \"phase2-autheap\" properties. Certificate data is "
"specified using a \"scheme\"; two are currently supported: blob and path. "
"When using the blob scheme (which is backwards compatible with NM 0.7.x) "
"this property should be set to the certificate's DER encoded data. When "
"using the path scheme, this property should be set to the full UTF-8 encoded "
"path of the certificate, prefixed with the string \"file://\" and ending "
"with a terminating NUL byte. This property can be unset even if the EAP "
"method supports CA certificates, but this allows man-in-the-middle attacks "
"and is NOT recommended."
msgstr ""

#: ../clients/common/settings-docs.h.in:70
msgid ""
"The password used to access the \"phase2\" CA certificate stored in \"phase2-"
"ca-cert\" property. Only makes sense if the certificate is stored on a "
"PKCS#11 token that requires a login."
msgstr ""

#: ../clients/common/settings-docs.h.in:71
msgid ""
"Flags indicating how to handle the \"phase2-ca-cert-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:72
msgid ""
"UTF-8 encoded path to a directory containing PEM or DER formatted "
"certificates to be added to the verification chain in addition to the "
"certificate specified in the \"phase2-ca-cert\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:73
msgid ""
"Contains the \"phase 2\" client certificate if used by the EAP method "
"specified in the \"phase2-auth\" or \"phase2-autheap\" properties. "
"Certificate data is specified using a \"scheme\"; two are currently "
"supported: blob and path. When using the blob scheme (which is backwards "
"compatible with NM 0.7.x) this property should be set to the certificate's "
"DER encoded data. When using the path scheme, this property should be set to "
"the full UTF-8 encoded path of the certificate, prefixed with the string "
"\"file://\" and ending with a terminating NUL byte. This property can be "
"unset even if the EAP method supports CA certificates, but this allows man-"
"in-the-middle attacks and is NOT recommended."
msgstr ""

#: ../clients/common/settings-docs.h.in:74
msgid ""
"The password used to access the \"phase2\" client certificate stored in "
"\"phase2-client-cert\" property. Only makes sense if the certificate is "
"stored on a PKCS#11 token that requires a login."
msgstr ""

#: ../clients/common/settings-docs.h.in:75
msgid ""
"Flags indicating how to handle the \"phase2-client-cert-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:76
msgid ""
"Constraint for server domain name. If set, this FQDN is used as a suffix "
"match requirement for dNSName element(s) of the certificate presented by the "
"authentication server during the inner \"phase 2\" authentication.  If a "
"matching dNSName is found, this constraint is met.  If no dNSName values are "
"present, this constraint is matched against SubjectName CN using same suffix "
"match comparison."
msgstr ""

#: ../clients/common/settings-docs.h.in:77
msgid ""
"Contains the \"phase 2\" inner private key when the \"phase2-auth\" or "
"\"phase2-autheap\" property is set to \"tls\". Key data is specified using a "
"\"scheme\"; two are currently supported: blob and path. When using the blob "
"scheme and private keys, this property should be set to the key's encrypted "
"PEM encoded data. When using private keys with the path scheme, this "
"property should be set to the full UTF-8 encoded path of the key, prefixed "
"with the string \"file://\" and ending with a terminating NUL byte. When "
"using PKCS#12 format private keys and the blob scheme, this property should "
"be set to the PKCS#12 data and the \"phase2-private-key-password\" property "
"must be set to password used to decrypt the PKCS#12 certificate and key. "
"When using PKCS#12 files and the path scheme, this property should be set to "
"the full UTF-8 encoded path of the key, prefixed with the string \"file://\" "
"and ending with a terminating NUL byte, and as with the blob scheme the "
"\"phase2-private-key-password\" property must be set to the password used to "
"decode the PKCS#12 private key and certificate."
msgstr ""

#: ../clients/common/settings-docs.h.in:78
msgid ""
"The password used to decrypt the \"phase 2\" private key specified in the "
"\"phase2-private-key\" property when the private key either uses the path "
"scheme, or is a PKCS#12 format key."
msgstr ""

#: ../clients/common/settings-docs.h.in:79
msgid ""
"Flags indicating how to handle the \"phase2-private-key-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:80
msgid ""
"Substring to be matched against the subject of the certificate presented by "
"the authentication server during the inner \"phase 2\" authentication. When "
"unset, no verification of the authentication server certificate's subject is "
"performed.  This property provides little security, if any, and its use is "
"deprecated in favor of NMSetting8021x:phase2-domain-suffix-match."
msgstr ""

#: ../clients/common/settings-docs.h.in:81
msgid "PIN used for EAP authentication methods."
msgstr ""

#: ../clients/common/settings-docs.h.in:82
#: ../clients/common/settings-docs.h.in:176
msgid "Flags indicating how to handle the \"pin\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:83
msgid ""
"Contains the private key when the \"eap\" property is set to \"tls\". Key "
"data is specified using a \"scheme\"; two are currently supported: blob and "
"path. When using the blob scheme and private keys, this property should be "
"set to the key's encrypted PEM encoded data. When using private keys with "
"the path scheme, this property should be set to the full UTF-8 encoded path "
"of the key, prefixed with the string \"file://\" and ending with a "
"terminating NUL byte. When using PKCS#12 format private keys and the blob "
"scheme, this property should be set to the PKCS#12 data and the \"private-"
"key-password\" property must be set to password used to decrypt the PKCS#12 "
"certificate and key. When using PKCS#12 files and the path scheme, this "
"property should be set to the full UTF-8 encoded path of the key, prefixed "
"with the string \"file://\" and ending with a terminating NUL byte, and as "
"with the blob scheme the \"private-key-password\" property must be set to "
"the password used to decode the PKCS#12 private key and certificate. "
"WARNING: \"private-key\" is not a \"secret\" property, and thus unencrypted "
"private key data using the BLOB scheme may be readable by unprivileged "
"users.  Private keys should always be encrypted with a private key password "
"to prevent unauthorized access to unencrypted private key data."
msgstr ""

#: ../clients/common/settings-docs.h.in:84
msgid ""
"The password used to decrypt the private key specified in the \"private-key"
"\" property when the private key either uses the path scheme, or if the "
"private key is a PKCS#12 format key."
msgstr ""

#: ../clients/common/settings-docs.h.in:85
msgid "Flags indicating how to handle the \"private-key-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:86
msgid ""
"Substring to be matched against the subject of the certificate presented by "
"the authentication server. When unset, no verification of the authentication "
"server certificate's subject is performed.  This property provides little "
"security, if any, and its use is deprecated in favor of NMSetting8021x:"
"domain-suffix-match."
msgstr ""

#: ../clients/common/settings-docs.h.in:87
msgid ""
"When TRUE, overrides the \"ca-path\" and \"phase2-ca-path\" properties using "
"the system CA directory specified at configure time with the --system-ca-"
"path switch.  The certificates in this directory are added to the "
"verification chain in addition to any certificates specified by the \"ca-cert"
"\" and \"phase2-ca-cert\" properties. If the path provided with --system-ca-"
"path is rather a file name (bundle of trusted CA certificates), it overrides "
"\"ca-cert\" and \"phase2-ca-cert\" properties instead (sets ca_cert/ca_cert2 "
"options for wpa_supplicant)."
msgstr ""

#: ../clients/common/settings-docs.h.in:88
msgid ""
"When TRUE, enforce auto-negotiation of speed and duplex mode. If \"speed\" "
"and \"duplex\" properties are both specified, only that single mode will be "
"advertised and accepted during the link auto-negotiation process: this works "
"only for BASE-T 802.3 specifications and is useful for enforcing gigabits "
"modes, as in these cases link negotiation is mandatory. When FALSE, \"speed"
"\" and \"duplex\" properties should be both set or link configuration will "
"be skipped."
msgstr ""

#: ../clients/common/settings-docs.h.in:89
msgid ""
"If specified, request that the device use this MAC address instead. This is "
"known as MAC cloning or spoofing. Beside explicitly specifying a MAC "
"address, the special values \"preserve\", \"permanent\", \"random\" and "
"\"stable\" are supported. \"preserve\" means not to touch the MAC address on "
"activation. \"permanent\" means to use the permanent hardware address if the "
"device has one (otherwise this is treated as \"preserve\"). \"random\" "
"creates a random MAC address on each connect. \"stable\" creates a hashed "
"MAC address based on connection.stable-id and a machine dependent key. If "
"unspecified, the value can be overwritten via global defaults, see manual of "
"NetworkManager.conf. If still unspecified, it defaults to \"preserve"
"\" (older versions of NetworkManager may use a different default value). On "
"D-Bus, this field is expressed as \"assigned-mac-address\" or the deprecated "
"\"cloned-mac-address\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:90
msgid ""
"When a value is set, either \"half\" or \"full\", configures the device to "
"use the specified duplex mode. If \"auto-negotiate\" is \"yes\" the "
"specified duplex mode will be the only one advertised during link "
"negotiation: this works only for BASE-T 802.3 specifications and is useful "
"for enforcing gigabits modes, as in these cases link negotiation is "
"mandatory. If the value is unset (the default), the link configuration will "
"be either skipped (if \"auto-negotiate\" is \"no\", the default) or will be "
"auto-negotiated (if \"auto-negotiate\" is \"yes\") and the local device will "
"advertise all the supported duplex modes. Must be set together with the "
"\"speed\" property if specified. Before specifying a duplex mode be sure "
"your device supports it."
msgstr ""

#: ../clients/common/settings-docs.h.in:92
msgid ""
"If specified, this connection will only apply to the Ethernet device whose "
"permanent MAC address matches. This property does not change the MAC address "
"of the device (i.e. MAC spoofing)."
msgstr ""

#: ../clients/common/settings-docs.h.in:93
msgid ""
"If specified, this connection will never apply to the Ethernet device whose "
"permanent MAC address matches an address in the list.  Each MAC address is "
"in the standard hex-digits-and-colons notation (00:11:22:33:44:55)."
msgstr ""

#: ../clients/common/settings-docs.h.in:95
msgid ""
"Specific port type to use if the device supports multiple attachment "
"methods.  One of \"tp\" (Twisted Pair), \"aui\" (Attachment Unit Interface), "
"\"bnc\" (Thin Ethernet) or \"mii\" (Media Independent Interface). If the "
"device supports only one port type, this setting is ignored."
msgstr ""

#: ../clients/common/settings-docs.h.in:96
msgid ""
"s390 network device type; one of \"qeth\", \"lcs\", or \"ctc\", representing "
"the different types of virtual network devices available on s390 systems."
msgstr ""

#: ../clients/common/settings-docs.h.in:97
msgid ""
"Dictionary of key/value pairs of s390-specific device options.  Both keys "
"and values must be strings.  Allowed keys include \"portno\", \"layer2\", "
"\"portname\", \"protocol\", among others.  Key names must contain only "
"alphanumeric characters (ie, [a-zA-Z0-9])."
msgstr ""

#: ../clients/common/settings-docs.h.in:98
msgid ""
"Identifies specific subchannels that this network device uses for "
"communication with z/VM or s390 host.  Like the \"mac-address\" property for "
"non-z/VM devices, this property can be used to ensure this connection only "
"applies to the network device that uses these subchannels.  The list should "
"contain exactly 3 strings, and each string may only be composed of "
"hexadecimal characters and the period (.) character."
msgstr ""

#: ../clients/common/settings-docs.h.in:99
msgid ""
"When a value grater than 0 is set, configures the device to use the "
"specified speed. If \"auto-negotiate\" is \"yes\" the specified speed will "
"be the only one advertised during link negotiation: this works only for BASE-"
"T 802.3 specifications and is useful for enforcing gigabit speeds, as in "
"this case link negotiation is mandatory. If the value is unset (0, the "
"default), the link configuration will be either skipped (if \"auto-negotiate"
"\" is \"no\", the default) or will be auto-negotiated (if \"auto-negotiate\" "
"is \"yes\") and the local device will advertise all the supported speeds. In "
"Mbit/s, ie 100 == 100Mbit/s. Must be set together with the \"duplex\" "
"property when non-zero. Before specifying a speed value be sure your device "
"supports it."
msgstr ""

#: ../clients/common/settings-docs.h.in:100
msgid ""
"The NMSettingWiredWakeOnLan options to enable. Not all devices support all "
"options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), "
"NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), "
"NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), "
"NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), "
"NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC "
"(0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to "
"use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to "
"disable management of Wake-on-LAN in NetworkManager)."
msgstr ""

#: ../clients/common/settings-docs.h.in:101
msgid ""
"If specified, the password used with magic-packet-based Wake-on-LAN, "
"represented as an Ethernet MAC address.  If NULL, no password will be "
"required."
msgstr ""

#: ../clients/common/settings-docs.h.in:102
msgid "Encapsulation of ADSL connection.  Can be \"vcmux\" or \"llc\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:103
msgid "Password used to authenticate with the ADSL service."
msgstr ""

#: ../clients/common/settings-docs.h.in:105
msgid "ADSL connection protocol.  Can be \"pppoa\", \"pppoe\" or \"ipoatm\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:106
msgid "Username used to authenticate with the ADSL service."
msgstr ""

#: ../clients/common/settings-docs.h.in:107
msgid "VCI of ADSL connection"
msgstr ""

#: ../clients/common/settings-docs.h.in:108
msgid "VPI of ADSL connection"
msgstr ""

#: ../clients/common/settings-docs.h.in:109
msgid "The Bluetooth address of the device."
msgstr ""

#: ../clients/common/settings-docs.h.in:110
msgid ""
"Either \"dun\" for Dial-Up Networking connections or \"panu\" for Personal "
"Area Networking connections to devices supporting the NAP profile."
msgstr ""

#: ../clients/common/settings-docs.h.in:111
msgid ""
"Dictionary of key/value pairs of bonding options.  Both keys and values must "
"be strings. Option names must contain only alphanumeric characters (ie, [a-"
"zA-Z0-9])."
msgstr ""

#: ../clients/common/settings-docs.h.in:112
msgid "The Ethernet MAC address aging time, in seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:113
msgid "The Spanning Tree Protocol (STP) forwarding delay, in seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:114
msgid ""
"A mask of group addresses to forward. Usually, group addresses in the range "
"from 01:80:C2:00:00:00 to 01:80:C2:00:00:0F are not forwarded according to "
"standards. This property is a mask of 16 bits, each corresponding to a group "
"address in that range that must be forwarded. The mask can't have bits 0, 1 "
"or 2 set because they are used for STP, MAC pause frames and LACP."
msgstr ""

#: ../clients/common/settings-docs.h.in:115
msgid "The Spanning Tree Protocol (STP) hello time, in seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:116
msgid ""
"If specified, the MAC address of bridge. When creating a new bridge, this "
"MAC address will be set. If this field is left unspecified, the \"ethernet."
"cloned-mac-address\" is referred instead to generate the initial MAC "
"address. Note that setting \"ethernet.cloned-mac-address\" anyway overwrites "
"the MAC address of the bridge later while activating the bridge. Hence, this "
"property is deprecated. Deprecated: 1"
msgstr ""

#: ../clients/common/settings-docs.h.in:117
msgid "The Spanning Tree Protocol (STP) maximum message age, in seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:118
msgid ""
"Controls whether IGMP snooping is enabled for this bridge. Note that if "
"snooping was automatically disabled due to hash collisions, the system may "
"refuse to enable the feature until the collisions are resolved."
msgstr ""

#: ../clients/common/settings-docs.h.in:119
msgid ""
"Sets the Spanning Tree Protocol (STP) priority for this bridge.  Lower "
"values are \"better\"; the lowest priority bridge will be elected the root "
"bridge."
msgstr ""

#: ../clients/common/settings-docs.h.in:120
msgid ""
"Controls whether Spanning Tree Protocol (STP) is enabled for this bridge."
msgstr ""

#: ../clients/common/settings-docs.h.in:121
msgid ""
"Enables or disables \"hairpin mode\" for the port, which allows frames to be "
"sent back out through the port the frame was received on."
msgstr ""

#: ../clients/common/settings-docs.h.in:122
msgid ""
"The Spanning Tree Protocol (STP) port cost for destinations via this port."
msgstr ""

#: ../clients/common/settings-docs.h.in:123
msgid "The Spanning Tree Protocol (STP) priority of this bridge port."
msgstr ""

#: ../clients/common/settings-docs.h.in:124
#: ../clients/common/settings-docs.h.in:170
#: ../clients/common/settings-docs.h.in:181
msgid ""
"If non-zero, only transmit packets of the specified size or smaller, "
"breaking larger packets up into multiple frames."
msgstr ""

#: ../clients/common/settings-docs.h.in:125
msgid ""
"The number to dial to establish the connection to the CDMA-based mobile "
"broadband network, if any.  If not specified, the default number (#777) is "
"used when required."
msgstr ""

#: ../clients/common/settings-docs.h.in:126
#: ../clients/common/settings-docs.h.in:173
msgid ""
"The password used to authenticate with the network, if required.  Many "
"providers do not require a password, or accept any password.  But if a "
"password is required, it is specified here."
msgstr ""

#: ../clients/common/settings-docs.h.in:128
#: ../clients/common/settings-docs.h.in:179
msgid ""
"The username used to authenticate with the network, if required.  Many "
"providers do not require a username, or accept any username.  But if a "
"username is required, it is specified here."
msgstr ""

#: ../clients/common/settings-docs.h.in:129
msgid ""
"The number of retries for the authentication. Zero means to try "
"indefinitely; -1 means to use a global default. If the global default is not "
"set, the authentication retries for 3 times before failing the connection. "
"Currently this only applies to 802-1x authentication."
msgstr ""

#: ../clients/common/settings-docs.h.in:130
msgid ""
"Whether or not the connection should be automatically connected by "
"NetworkManager when the resources for the connection are available. TRUE to "
"automatically activate the connection, FALSE to require manual intervention "
"to activate the connection. Note that autoconnect is not implemented for VPN "
"profiles. See \"secondaries\" as an alternative to automatically connect VPN "
"profiles."
msgstr ""

#: ../clients/common/settings-docs.h.in:131
msgid ""
"The autoconnect priority. If the connection is set to autoconnect, "
"connections with higher priority will be preferred. Defaults to 0. The "
"higher number means higher priority."
msgstr ""

#: ../clients/common/settings-docs.h.in:132
msgid ""
"The number of times a connection should be tried when autoactivating before "
"giving up. Zero means forever, -1 means the global default (4 times if not "
"overridden). Setting this to 1 means to try activation only once before "
"blocking autoconnect. Note that after a timeout, NetworkManager will try to "
"autoconnect again."
msgstr ""

#: ../clients/common/settings-docs.h.in:133
msgid ""
"Whether or not slaves of this connection should be automatically brought up "
"when NetworkManager activates this connection. This only has a real effect "
"for master connections. The properties \"autoconnect\", \"autoconnect-"
"priority\" and \"autoconnect-retries\" are unrelated to this setting. The "
"permitted values are: 0: leave slave connections untouched, 1: activate all "
"the slave connections with this connection, -1: default. If -1 (default) is "
"set, global connection.autoconnect-slaves is read to determine the real "
"value. If it is default as well, this fallbacks to 0."
msgstr ""

#: ../clients/common/settings-docs.h.in:134
msgid ""
"If greater than zero, delay success of IP addressing until either the "
"timeout is reached, or an IP gateway replies to a ping."
msgstr ""

#: ../clients/common/settings-docs.h.in:135
msgid ""
"A human readable unique identifier for the connection, like \"Work Wi-Fi\" "
"or \"T-Mobile 3G\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:136
msgid ""
"The name of the network interface this connection is bound to. If not set, "
"then the connection can be attached to any interface of the appropriate type "
"(subject to restrictions imposed by other settings). For software devices "
"this specifies the name of the created device. For connection types where "
"interface names cannot easily be made persistent (e.g. mobile broadband or "
"USB Ethernet), this property should not be used. Setting this property "
"restricts the interfaces a connection can be used with, and if interface "
"names change or are reordered the connection may be applied to the wrong "
"interface."
msgstr ""

#: ../clients/common/settings-docs.h.in:137
msgid "Whether LLDP is enabled for the connection."
msgstr ""

#: ../clients/common/settings-docs.h.in:138
msgid ""
"Whether Link-Local Multicast Name Resolution (LLMNR) is enabled for the "
"connection. LLMNR is a protocol based on the Domain Name System (DNS) packet "
"format that allows both IPv4 and IPv6 hosts to perform name resolution for "
"hosts on the same local link. The permitted values are: yes: register "
"hostname and resolving for the connection, no: disable LLMNR for the "
"interface, resolve: do not register hostname but allow resolving of LLMNR "
"host names. This feature requires a plugin which supports LLMNR. One such "
"plugin is dns-systemd-resolved."
msgstr ""

#: ../clients/common/settings-docs.h.in:139
msgid "Interface name of the master device or UUID of the master connection."
msgstr ""

#: ../clients/common/settings-docs.h.in:140
msgid ""
"Whether mDNS is enabled for the connection. The permitted values are: yes: "
"register hostname and resolving for the connection, no: disable mDNS for the "
"interface, resolve: do not register hostname but allow resolving of mDNS "
"host names. This feature requires a plugin which supports mDNS. One such "
"plugin is dns-systemd-resolved."
msgstr ""

#: ../clients/common/settings-docs.h.in:141
msgid ""
"Whether the connection is metered. When updating this property on a "
"currently activated connection, the change takes effect immediately."
msgstr ""

#: ../clients/common/settings-docs.h.in:142
msgid ""
"Specifies whether the profile can be active multiple times at a particular "
"moment. The value is of type NMConnectionMultiConnect."
msgstr ""

#: ../clients/common/settings-docs.h.in:143
msgid ""
"An array of strings defining what access a given user has to this "
"connection.  If this is NULL or empty, all users are allowed to access this "
"connection; otherwise users are allowed if and only if they are in this "
"list.  When this is not empty, the connection can be active only when one of "
"the specified users is logged into an active session.  Each entry is of the "
"form \"[type]:[id]:[reserved]\"; for example, \"user:dcbw:blah\". At this "
"time only the \"user\" [type] is allowed.  Any other values are ignored and "
"reserved for future use.  [id] is the username that this permission refers "
"to, which may not contain the \":\" character. Any [reserved] information "
"present must be ignored and is reserved for future use.  All of [type], "
"[id], and [reserved] must be valid UTF-8."
msgstr ""

#: ../clients/common/settings-docs.h.in:144
msgid ""
"FALSE if the connection can be modified using the provided settings "
"service's D-Bus interface with the right privileges, or TRUE if the "
"connection is read-only and cannot be modified."
msgstr ""

#: ../clients/common/settings-docs.h.in:145
msgid ""
"List of connection UUIDs that should be activated when the base connection "
"itself is activated. Currently only VPN connections are supported."
msgstr ""

#: ../clients/common/settings-docs.h.in:146
msgid ""
"Setting name of the device type of this slave's master connection (eg, \"bond"
"\"), or NULL if this connection is not a slave."
msgstr ""

#: ../clients/common/settings-docs.h.in:147
msgid ""
"This represents the identity of the connection used for various purposes. It "
"allows to configure multiple profiles to share the identity. Also, the "
"stable-id can contain placeholders that are substituted dynamically and "
"deterministically depending on the context. The stable-id is used for "
"generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-"
"privacy. It is also used to seed the generated cloned MAC address for "
"ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is "
"also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to "
"derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that "
"depending on the context where it is used, other parameters are also seeded "
"into the generation algorithm. For example, a per-host key is commonly also "
"included, so that different systems end up generating different IDs. Or with "
"ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so "
"that different interfaces yield different addresses. The '$' character is "
"treated special to perform dynamic substitutions at runtime. Currently "
"supported are \"${CONNECTION}\", \"${DEVICE}\", \"${MAC}\", \"${BOOT}\", "
"\"${RANDOM}\". These effectively create unique IDs per-connection, per-"
"device, per-boot, or every time. Note that \"${DEVICE}\" corresponds the the "
"interface name of the device and \"${MAC}\" is the permanent MAC address of "
"the device. Any unrecognized patterns following '$' are treated verbatim, "
"however are reserved for future use. You are thus advised to avoid '$' or "
"escape it as \"$$\". For example, set it to \"${CONNECTION}-${BOOT}-"
"${DEVICE}\" to create a unique id for this connection that changes with "
"every reboot and differs depending on the interface where the profile "
"activates. If the value is unset, a global connection default is consulted. "
"If the value is still unset, the default is similar to \"${CONNECTION}\" and "
"uses a unique, fixed ID for the connection."
msgstr ""

#: ../clients/common/settings-docs.h.in:148
msgid ""
"The time, in seconds since the Unix Epoch, that the connection was last "
"_successfully_ fully activated. NetworkManager updates the connection "
"timestamp periodically when the connection is active to ensure that an "
"active connection has the latest timestamp. The property is only meant for "
"reading (changes to this property will not be preserved)."
msgstr ""

#: ../clients/common/settings-docs.h.in:149
msgid ""
"Base type of the connection. For hardware-dependent connections, should "
"contain the setting name of the hardware-type specific setting (ie, \"802-3-"
"ethernet\" or \"802-11-wireless\" or \"bluetooth\", etc), and for non-"
"hardware dependent connections like VPN or otherwise, should contain the "
"setting name of that setting type (ie, \"vpn\" or \"bridge\", etc)."
msgstr ""

#: ../clients/common/settings-docs.h.in:150
msgid ""
"A universally unique identifier for the connection, for example generated "
"with libuuid.  It should be assigned when the connection is created, and "
"never changed as long as the connection still applies to the same network.  "
"For example, it should not be changed when the \"id\" property or "
"NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi "
"SSID, mobile broadband network provider, or \"type\" property changes. The "
"UUID must be in the format \"2815492f-7e56-435e-b2e9-246bd7cdc664\" (ie, "
"contains only hexadecimal characters and \"-\")."
msgstr ""

#: ../clients/common/settings-docs.h.in:151
msgid ""
"The trust level of a the connection.  Free form case-insensitive string (for "
"example \"Home\", \"Work\", \"Public\").  NULL or unspecified zone means the "
"connection will be placed in the default zone as defined by the firewall. "
"When updating this property on a currently activated connection, the change "
"takes effect immediately."
msgstr ""

#: ../clients/common/settings-docs.h.in:152
msgid ""
"Specifies the NMSettingDcbFlags for the DCB FCoE application.  Flags may be "
"any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), "
"NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)."
msgstr ""

#: ../clients/common/settings-docs.h.in:153
msgid "The FCoE controller mode; either \"fabric\" (default) or \"vn2vn\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:154
msgid ""
"The highest User Priority (0 - 7) which FCoE frames should use, or -1 for "
"default priority.  Only used when the \"app-fcoe-flags\" property includes "
"the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag."
msgstr ""

#: ../clients/common/settings-docs.h.in:155
msgid ""
"Specifies the NMSettingDcbFlags for the DCB FIP application.  Flags may be "
"any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), "
"NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)."
msgstr ""

#: ../clients/common/settings-docs.h.in:156
msgid ""
"The highest User Priority (0 - 7) which FIP frames should use, or -1 for "
"default priority.  Only used when the \"app-fip-flags\" property includes "
"the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag."
msgstr ""

#: ../clients/common/settings-docs.h.in:157
msgid ""
"Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags may be "
"any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), "
"NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)."
msgstr ""

#: ../clients/common/settings-docs.h.in:158
msgid ""
"The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for "
"default priority. Only used when the \"app-iscsi-flags\" property includes "
"the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag."
msgstr ""

#: ../clients/common/settings-docs.h.in:159
msgid ""
"An array of 8 uint values, where the array index corresponds to the User "
"Priority (0 - 7) and the value indicates the percentage of bandwidth of the "
"priority's assigned group that the priority may use.  The sum of all "
"percentages for priorities which belong to the same group must total 100 "
"percents."
msgstr ""

#: ../clients/common/settings-docs.h.in:160
msgid ""
"An array of 8 boolean values, where the array index corresponds to the User "
"Priority (0 - 7) and the value indicates whether or not the corresponding "
"priority should transmit priority pause."
msgstr ""

#: ../clients/common/settings-docs.h.in:161
msgid ""
"Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags "
"may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), "
"NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)."
msgstr ""

#: ../clients/common/settings-docs.h.in:162
msgid ""
"An array of 8 uint values, where the array index corresponds to the Priority "
"Group ID (0 - 7) and the value indicates the percentage of link bandwidth "
"allocated to that group.  Allowed values are 0 - 100, and the sum of all "
"values must total 100 percents."
msgstr ""

#: ../clients/common/settings-docs.h.in:163
msgid ""
"Specifies the NMSettingDcbFlags for DCB Priority Groups.  Flags may be any "
"combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), "
"NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)."
msgstr ""

#: ../clients/common/settings-docs.h.in:164
msgid ""
"An array of 8 uint values, where the array index corresponds to the User "
"Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed "
"Priority Group ID values are 0 - 7 or 15 for the unrestricted group."
msgstr ""

#: ../clients/common/settings-docs.h.in:165
msgid ""
"An array of 8 boolean values, where the array index corresponds to the User "
"Priority (0 - 7) and the value indicates whether or not the priority may use "
"all of the bandwidth allocated to its assigned group."
msgstr ""

#: ../clients/common/settings-docs.h.in:166
msgid ""
"An array of 8 uint values, where the array index corresponds to the User "
"Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which "
"the priority is mapped."
msgstr ""

#: ../clients/common/settings-docs.h.in:167
msgid ""
"The GPRS Access Point Name specifying the APN used when establishing a data "
"session with the GSM-based network.  The APN often determines how the user "
"will be billed for their network usage and whether the user has access to "
"the Internet or just a provider-specific walled-garden, so it is important "
"to use the correct APN for the user's mobile broadband plan. The APN may "
"only be composed of the characters a-z, 0-9, ., and - per GSM 03.60 Section "
"14.9."
msgstr ""

#: ../clients/common/settings-docs.h.in:168
msgid ""
"The device unique identifier (as given by the WWAN management service) which "
"this connection applies to.  If given, the connection will only apply to the "
"specified device."
msgstr ""

#: ../clients/common/settings-docs.h.in:169
msgid ""
"When TRUE, only connections to the home network will be allowed. Connections "
"to roaming networks will not be made."
msgstr ""

#: ../clients/common/settings-docs.h.in:171
msgid ""
"The Network ID (GSM LAI format, ie MCC-MNC) to force specific network "
"registration.  If the Network ID is specified, NetworkManager will attempt "
"to force the device to register only on the specified network. This can be "
"used to ensure that the device does not roam when direct roaming control of "
"the device is not otherwise possible."
msgstr ""

#: ../clients/common/settings-docs.h.in:172
msgid ""
"Legacy setting that used to help establishing PPP data sessions for GSM-"
"based modems. Deprecated: 1"
msgstr ""

#: ../clients/common/settings-docs.h.in:175
msgid ""
"If the SIM is locked with a PIN it must be unlocked before any other "
"operations are requested.  Specify the PIN here to allow operation of the "
"device."
msgstr ""

#: ../clients/common/settings-docs.h.in:177
msgid ""
"The SIM card unique identifier (as given by the WWAN management service) "
"which this connection applies to.  If given, the connection will apply to "
"any device also allowed by \"device-id\" which contains a SIM card matching "
"the given identifier."
msgstr ""

#: ../clients/common/settings-docs.h.in:178
msgid ""
"A MCC/MNC string like \"310260\" or \"21601\" identifying the specific "
"mobile network operator which this connection applies to.  If given, the "
"connection will apply to any device also allowed by \"device-id\" and \"sim-"
"id\" which contains a SIM card provisioned by the given operator."
msgstr ""

#: ../clients/common/settings-docs.h.in:180
msgid ""
"If specified, this connection will only apply to the IPoIB device whose "
"permanent MAC address matches. This property does not change the MAC address "
"of the device (i.e. MAC spoofing)."
msgstr ""

#: ../clients/common/settings-docs.h.in:182
msgid ""
"The InfiniBand P_Key to use for this device. A value of -1 means to use the "
"default P_Key (aka \"the P_Key at index 0\").  Otherwise it is a 16-bit "
"unsigned integer, whose high bit is set if it is a \"full membership\" P_Key."
msgstr ""

#: ../clients/common/settings-docs.h.in:183
msgid ""
"The interface name of the parent device of this device. Normally NULL, but "
"if the \"p_key\" property is set, then you must specify the base device by "
"setting either this property or \"mac-address\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:184
msgid ""
"The IP-over-InfiniBand transport mode. Either \"datagram\" or \"connected\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:185
msgid ""
"How many additional levels of encapsulation are permitted to be prepended to "
"packets. This property applies only to IPv6 tunnels."
msgstr ""

#: ../clients/common/settings-docs.h.in:186
msgid ""
"Tunnel flags. Currently the following values are supported: "
"NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), "
"NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), "
"NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), "
"NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY "
"(0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only "
"for IPv6 tunnels."
msgstr ""

#: ../clients/common/settings-docs.h.in:187
msgid ""
"The flow label to assign to tunnel packets. This property applies only to "
"IPv6 tunnels."
msgstr ""

#: ../clients/common/settings-docs.h.in:188
msgid ""
"The key used for tunnel input packets; the property is valid only for "
"certain tunnel modes (GRE, IP6GRE). If empty, no key is used."
msgstr ""

#: ../clients/common/settings-docs.h.in:189
msgid ""
"The local endpoint of the tunnel; the value can be empty, otherwise it must "
"contain an IPv4 or IPv6 address."
msgstr ""

#: ../clients/common/settings-docs.h.in:190
msgid ""
"The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or "
"NM_IP_TUNNEL_MODE_GRE (2)."
msgstr ""

#: ../clients/common/settings-docs.h.in:191
msgid ""
"If non-zero, only transmit packets of the specified size or smaller, "
"breaking larger packets up into multiple fragments."
msgstr ""

#: ../clients/common/settings-docs.h.in:192
msgid ""
"The key used for tunnel output packets; the property is valid only for "
"certain tunnel modes (GRE, IP6GRE). If empty, no key is used."
msgstr ""

#: ../clients/common/settings-docs.h.in:193
msgid ""
"If given, specifies the parent interface name or parent connection UUID the "
"new device will be bound to so that tunneled packets will only be routed via "
"that interface."
msgstr ""

#: ../clients/common/settings-docs.h.in:194
msgid "Whether to enable Path MTU Discovery on this tunnel."
msgstr ""

#: ../clients/common/settings-docs.h.in:195
msgid ""
"The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 "
"address."
msgstr ""

#: ../clients/common/settings-docs.h.in:196
msgid ""
"The type of service (IPv4) or traffic class (IPv6) field to be set on "
"tunneled packets."
msgstr ""

#: ../clients/common/settings-docs.h.in:197
msgid ""
"The TTL to assign to tunneled packets. 0 is a special value meaning that "
"packets inherit the TTL value."
msgstr ""

#: ../clients/common/settings-docs.h.in:198
#: ../clients/common/settings-docs.h.in:219
msgid "Array of IP addresses."
msgstr ""

#: ../clients/common/settings-docs.h.in:199
#: ../clients/common/settings-docs.h.in:220
msgid ""
"Timeout in milliseconds used to check for the presence of duplicate IP "
"addresses on the network.  If an address conflict is detected, the "
"activation will fail.  A zero value means that no duplicate address "
"detection is performed, -1 means the default value (either configuration "
"ipvx.dad-timeout override or zero).  A value greater than zero is a timeout "
"in milliseconds. The property is currently implemented only for IPv4."
msgstr ""

#: ../clients/common/settings-docs.h.in:200
msgid ""
"A string sent to the DHCP server to identify the local machine which the "
"DHCP server may use to customize the DHCP lease and options. When the "
"property is a hex string ('aa:bb:cc') it is interpreted as a binary client "
"ID, in which case the first byte is assumed to be the 'type' field as per "
"RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e."
"g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a "
"MAC address). If the property is not a hex string it is considered as a non-"
"hardware-address client ID and the 'type' field is set to 0. The special "
"values \"mac\" and \"perm-mac\" are supported, which use the current or "
"permanent MAC address of the device to generate a client identifier with "
"type ethernet (01). Currently, these options only work for ethernet type of "
"links. The special value \"duid\" generates a RFC4361-compliant client "
"identifier based on a hash of the interface name as IAID and /etc/machine-"
"id. The special value \"stable\" is supported to generate a type 0 client "
"identifier based on the stable-id (see connection.stable-id) and a per-host "
"key. If you set the stable-id, you may want to include the \"${DEVICE}\" or "
"\"${MAC}\" specifier to get a per-device key. If unset, a globally "
"configured default is used. If still unset, the default depends on the DHCP "
"plugin."
msgstr ""

#: ../clients/common/settings-docs.h.in:201
msgid ""
"If the \"dhcp-send-hostname\" property is TRUE, then the specified FQDN will "
"be sent to the DHCP server when acquiring a lease. This property and \"dhcp-"
"hostname\" are mutually exclusive and cannot be set at the same time."
msgstr ""

#: ../clients/common/settings-docs.h.in:202
#: ../clients/common/settings-docs.h.in:222
msgid ""
"If the \"dhcp-send-hostname\" property is TRUE, then the specified name will "
"be sent to the DHCP server when acquiring a lease. This property and \"dhcp-"
"fqdn\" are mutually exclusive and cannot be set at the same time."
msgstr ""

#: ../clients/common/settings-docs.h.in:203
#: ../clients/common/settings-docs.h.in:223
msgid ""
"If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some "
"DHCP servers use this hostname to update DNS databases, essentially "
"providing a static hostname for the computer.  If the \"dhcp-hostname\" "
"property is NULL and this property is TRUE, the current persistent hostname "
"of the computer is sent."
msgstr ""

#: ../clients/common/settings-docs.h.in:204
#: ../clients/common/settings-docs.h.in:224
msgid "A timeout for a DHCP transaction in seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:205
#: ../clients/common/settings-docs.h.in:225
msgid "Array of IP addresses of DNS servers."
msgstr ""

#: ../clients/common/settings-docs.h.in:206
#: ../clients/common/settings-docs.h.in:226
msgid ""
"Array of DNS options as described in man 5 resolv.conf. NULL means that the "
"options are unset and left at the default. In this case NetworkManager will "
"use default options. This is distinct from an empty list of properties."
msgstr ""

#: ../clients/common/settings-docs.h.in:207
#: ../clients/common/settings-docs.h.in:227
msgid ""
"DNS servers priority. The relative priority for DNS servers specified by "
"this setting.  A lower value is better (higher priority). Zero selects a "
"globally configured default value. If the latter is missing or zero too, it "
"defaults to 50 for VPNs and 100 for other connections. Note that the "
"priority is to order DNS settings for multiple active connections.  It does "
"not disambiguate multiple DNS servers within the same connection profile. "
"When using dns=default, servers with higher priority will be on top of "
"resolv.conf.  To prioritize a given server over another one within the same "
"connection, just specify them in the desired order.  When multiple devices "
"have configurations with the same priority, the one with an active default "
"route will be preferred.  Negative values have the special effect of "
"excluding other configurations with a greater priority value; so in presence "
"of at least a negative priority, only DNS servers from connections with the "
"lowest priority value will be used. When using a DNS resolver that supports "
"split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to "
"query domains in its search list.  Queries for domains not present in any "
"search list are routed through connections having the '~.' special wildcard "
"domain, which is added automatically to connections with the default route "
"(or can be added manually).  When multiple connections specify the same "
"domain, the one with the highest priority (lowest numerical value) wins.  If "
"a connection specifies a domain which is subdomain of another domain with a "
"negative DNS priority value, the subdomain is ignored."
msgstr ""

#: ../clients/common/settings-docs.h.in:208
#: ../clients/common/settings-docs.h.in:228
msgid ""
"Array of DNS search domains. Domains starting with a tilde ('~') are "
"considered 'routing' domains and are used only to decide the interface over "
"which a query must be forwarded; they are not used to complete unqualified "
"host names."
msgstr ""

#: ../clients/common/settings-docs.h.in:209
#: ../clients/common/settings-docs.h.in:229
msgid ""
"The gateway associated with this configuration. This is only meaningful if "
"\"addresses\" is also set."
msgstr ""

#: ../clients/common/settings-docs.h.in:210
#: ../clients/common/settings-docs.h.in:230
msgid ""
"When \"method\" is set to \"auto\" and this property to TRUE, automatically "
"configured nameservers and search domains are ignored and only nameservers "
"and search domains specified in the \"dns\" and \"dns-search\" properties, "
"if any, are used."
msgstr ""

#: ../clients/common/settings-docs.h.in:211
#: ../clients/common/settings-docs.h.in:231
msgid ""
"When \"method\" is set to \"auto\" and this property to TRUE, automatically "
"configured routes are ignored and only routes specified in the \"routes\" "
"property, if any, are used."
msgstr ""

#: ../clients/common/settings-docs.h.in:212
#: ../clients/common/settings-docs.h.in:233
msgid ""
"If TRUE, allow overall network configuration to proceed even if the "
"configuration specified by this property times out.  Note that at least one "
"IP configuration must succeed or overall network configuration will still "
"fail.  For example, in IPv6-only networks, setting this property to TRUE on "
"the NMSettingIP4Config allows the overall network configuration to succeed "
"if IPv4 configuration fails but IPv6 configuration completes successfully."
msgstr ""

#: ../clients/common/settings-docs.h.in:213
#: ../clients/common/settings-docs.h.in:234
msgid ""
"IP configuration method. NMSettingIP4Config and NMSettingIP6Config both "
"support \"auto\", \"manual\", and \"link-local\". See the subclass-specific "
"documentation for other values. In general, for the \"auto\" method, "
"properties such as \"dns\" and \"routes\" specify information that is added "
"on to the information returned from automatic configuration.  The \"ignore-"
"auto-routes\" and \"ignore-auto-dns\" properties modify this behavior. For "
"methods that imply no upstream network, such as \"shared\" or \"link-local"
"\", these properties must be empty. For IPv4 method \"shared\", the IP "
"subnet can be configured by adding one manual IPv4 address or otherwise "
"10.42.x.0/24 is chosen. Note that the shared method must be configured on "
"the interface which shares the internet to a subnet, not on the uplink which "
"is shared."
msgstr ""

#: ../clients/common/settings-docs.h.in:214
#: ../clients/common/settings-docs.h.in:235
msgid ""
"If TRUE, this connection will never be the default connection for this IP "
"type, meaning it will never be assigned the default route by NetworkManager."
msgstr ""

#: ../clients/common/settings-docs.h.in:215
#: ../clients/common/settings-docs.h.in:236
msgid ""
"The default metric for routes that don't explicitly specify a metric. The "
"default value -1 means that the metric is chosen automatically based on the "
"device type. The metric applies to dynamic routes, manual (static) routes "
"that don't have an explicit metric setting, address prefix routes, and the "
"default route. Note that for IPv6, the kernel accepts zero (0) but coerces "
"it to 1024 (user default). Hence, setting this property to zero effectively "
"mean setting it to 1024. For IPv4, zero is a regular value for the metric."
msgstr ""

#: ../clients/common/settings-docs.h.in:216
#: ../clients/common/settings-docs.h.in:237
msgid ""
"Enable policy routing (source routing) and set the routing table used when "
"adding routes. This affects all routes, including device-routes, IPv4LL, "
"DHCP, SLAAC, default-routes and static routes. But note that static routes "
"can individually overwrite the setting by explicitly specifying a non-zero "
"routing table. If the table setting is left at zero, it is eligible to be "
"overwritten via global configuration. If the property is zero even after "
"applying the global configuration value, policy routing is disabled for the "
"address family of this connection. Policy routing disabled means that "
"NetworkManager will add all routes to the main table (except static routes "
"that explicitly configure a different table). Additionally, NetworkManager "
"will not delete any extraneous routes from tables except the main table. "
"This is to preserve backward compatibility for users who manage routing "
"tables outside of NetworkManager."
msgstr ""

#: ../clients/common/settings-docs.h.in:217
#: ../clients/common/settings-docs.h.in:238
msgid "Array of IP routes."
msgstr ""

#: ../clients/common/settings-docs.h.in:218
msgid ""
"Configure method for creating the address for use with RFC4862 IPv6 "
"Stateless Address Autoconfiguration. The permitted values are: "
"NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_EUI64 (0) or "
"NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_STABLE_PRIVACY (1). If the property is "
"set to EUI64, the addresses will be generated using the interface tokens "
"derived from hardware address. This makes the host part of the address to "
"stay constant, making it possible to track host's presence when it changes "
"networks. The address changes when the interface hardware is replaced. The "
"value of stable-privacy enables use of cryptographically secure hash of a "
"secret host-specific key along with the connection's stable-id and the "
"network address as specified by RFC7217. This makes it impossible to use the "
"address track host's presence, and makes the address stable when the network "
"interface hardware is replaced. On D-Bus, the absence of an addr-gen-mode "
"setting equals enabling stable-privacy. For keyfile plugin, the absence of "
"the setting on disk means EUI64 so that the property doesn't change on "
"upgrade from older versions. Note that this setting is distinct from the "
"Privacy Extensions as configured by \"ip6-privacy\" property and it does not "
"affect the temporary addresses configured with this option."
msgstr ""

#: ../clients/common/settings-docs.h.in:221
msgid ""
"A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp "
"client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried "
"in the Client Identifier option. If the property is a hex string ('aa:bb:"
"cc') it is interpreted as a binary DUID and filled as an opaque value in the "
"Client Identifier option. The special value \"lease\" will retrieve the DUID "
"previously used from the lease file belonging to the connection. If no DUID "
"is found and \"dhclient\" is the configured dhcp client, the DUID is "
"searched in the system-wide dhclient lease file. If still no DUID is found, "
"or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) "
"will be generated based on the machine-id. The special values \"llt\" and "
"\"ll\" will generate a DUID of type LLT or LL (see RFC 3315) based on the "
"current MAC address of the device. In order to try providing a stable DUID-"
"LLT, the time field will contain a constant timestamp that is used globally "
"(for all profiles) and persisted to disk. The special values \"stable-llt\", "
"\"stable-ll\" and \"stable-uuid\" will generate a DUID of the corresponding "
"type, derived from the connection's stable-id and a per-host unique key. You "
"may want to include the \"${DEVICE}\" or \"${MAC}\" specifier in the stable-"
"id, in case this profile gets activated on multiple devices. So, the link-"
"layer address of \"stable-ll\" and \"stable-llt\" will be a generated "
"address derived from the stable id. The DUID-LLT time value in the \"stable-"
"llt\" option will be picked among a static timespan of three years (the "
"upper bound of the interval is the same constant timestamp used in \"llt\"). "
"When the property is unset, the global value provided for \"ipv6.dhcp-duid\" "
"is used. If no global value is provided, the default \"lease\" value is "
"assumed."
msgstr ""

#: ../clients/common/settings-docs.h.in:232
msgid ""
"Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941.  If "
"enabled, it makes the kernel generate a temporary IPv6 address in addition "
"to the public one generated from MAC address via modified EUI-64.  This "
"enhances privacy, but could cause problems in some applications, on the "
"other hand.  The permitted values are: -1: unknown, 0: disabled, 1: enabled "
"(prefer public address), 2: enabled (prefer temporary addresses). Having a "
"per-connection setting set to \"-1\" (unknown) means fallback to global "
"configuration \"ipv6.ip6-privacy\". If also global configuration is "
"unspecified or set to \"-1\", fallback to read \"/proc/sys/net/ipv6/conf/"
"default/use_tempaddr\". Note that this setting is distinct from the Stable "
"Privacy addresses that can be enabled with the \"addr-gen-mode\" property's "
"\"stable-privacy\" setting as another way of avoiding host tracking with "
"IPv6 addresses."
msgstr ""

#: ../clients/common/settings-docs.h.in:239
msgid ""
"Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 "
"tokenized interface identifiers. Useful with eui64 addr-gen-mode."
msgstr ""

#: ../clients/common/settings-docs.h.in:240
msgid "Whether the transmitted traffic must be encrypted."
msgstr ""

#: ../clients/common/settings-docs.h.in:241
msgid ""
"The pre-shared CAK (Connectivity Association Key) for MACsec Key Agreement."
msgstr ""

#: ../clients/common/settings-docs.h.in:242
msgid "Flags indicating how to handle the \"mka-cak\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:243
msgid ""
"The pre-shared CKN (Connectivity-association Key Name) for MACsec Key "
"Agreement."
msgstr ""

#: ../clients/common/settings-docs.h.in:244
msgid ""
"Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key "
"Agreement) is obtained."
msgstr ""

#: ../clients/common/settings-docs.h.in:245
msgid ""
"If given, specifies the parent interface name or parent connection UUID from "
"which this MACSEC interface should be created.  If this property is not "
"specified, the connection must contain an \"802-3-ethernet\" setting with a "
"\"mac-address\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:246
msgid ""
"The port component of the SCI (Secure Channel Identifier), between 1 and "
"65534."
msgstr ""

#: ../clients/common/settings-docs.h.in:247
msgid ""
"Specifies whether the SCI (Secure Channel Identifier) is included in every "
"packet."
msgstr ""

#: ../clients/common/settings-docs.h.in:248
msgid "Specifies the validation mode for incoming frames."
msgstr ""

#: ../clients/common/settings-docs.h.in:249
msgid ""
"The macvlan mode, which specifies the communication mechanism between "
"multiple macvlans on the same lower device."
msgstr ""

#: ../clients/common/settings-docs.h.in:250
msgid ""
"If given, specifies the parent interface name or parent connection UUID from "
"which this MAC-VLAN interface should be created.  If this property is not "
"specified, the connection must contain an \"802-3-ethernet\" setting with a "
"\"mac-address\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:251
msgid "Whether the interface should be put in promiscuous mode."
msgstr ""

#: ../clients/common/settings-docs.h.in:252
msgid "Whether the interface should be a MACVTAP."
msgstr ""

#: ../clients/common/settings-docs.h.in:253
msgid ""
"A list of interface names to match. Each element is a shell wildcard "
"pattern.  When an element is prefixed with exclamation mark (!) the "
"condition is inverted. A candidate interface name is considered matching "
"when both these conditions are satisfied: (a) any of the elements not "
"prefixed with '!' matches or there aren't such elements; (b) none of the "
"elements prefixed with '!' match."
msgstr ""

#: ../clients/common/settings-docs.h.in:254
msgid "The bridge failure mode. One of \"secure\", \"standalone\" or empty."
msgstr ""

#: ../clients/common/settings-docs.h.in:255
msgid "Enable or disable multicast snooping."
msgstr ""

#: ../clients/common/settings-docs.h.in:256
msgid "Enable or disable RSTP."
msgstr ""

#: ../clients/common/settings-docs.h.in:257
msgid "Enable or disable STP."
msgstr ""

#: ../clients/common/settings-docs.h.in:258
msgid "The interface type. Either \"internal\", or empty."
msgstr ""

#: ../clients/common/settings-docs.h.in:259
msgid ""
"Specifies the unicast destination IP address of a remote Open vSwitch bridge "
"port to connect to."
msgstr ""

#: ../clients/common/settings-docs.h.in:260
msgid "The time port must be inactive in order to be considered down."
msgstr ""

#: ../clients/common/settings-docs.h.in:261
msgid ""
"Bonding mode. One of \"active-backup\", \"balance-slb\", or \"balance-tcp\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:262
msgid "The time port must be active before it starts forwarding traffic."
msgstr ""

#: ../clients/common/settings-docs.h.in:263
msgid "LACP mode. One of \"active\", \"off\", or \"passive\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:264
msgid "The VLAN tag in the range 0-4095."
msgstr ""

#: ../clients/common/settings-docs.h.in:265
msgid ""
"The VLAN mode. One of \"access\", \"native-tagged\", \"native-untagged\", "
"\"trunk\" or unset."
msgstr ""

#: ../clients/common/settings-docs.h.in:266
msgid ""
"If non-zero, instruct pppd to set the serial port to the specified "
"baudrate.  This value should normally be left as 0 to automatically choose "
"the speed."
msgstr ""

#: ../clients/common/settings-docs.h.in:267
msgid ""
"If TRUE, specify that pppd should set the serial port to use hardware flow "
"control with RTS and CTS signals.  This value should normally be set to "
"FALSE."
msgstr ""

#: ../clients/common/settings-docs.h.in:268
msgid ""
"If non-zero, instruct pppd to presume the connection to the peer has failed "
"if the specified number of LCP echo-requests go unanswered by the peer.  The "
"\"lcp-echo-interval\" property must also be set to a non-zero value if this "
"property is used."
msgstr ""

#: ../clients/common/settings-docs.h.in:269
msgid ""
"If non-zero, instruct pppd to send an LCP echo-request frame to the peer "
"every n seconds (where n is the specified value).  Note that some PPP peers "
"will respond to echo requests and some will not, and it is not possible to "
"autodetect this."
msgstr ""

#: ../clients/common/settings-docs.h.in:270
msgid ""
"If TRUE, stateful MPPE is used.  See pppd documentation for more information "
"on stateful MPPE."
msgstr ""

#: ../clients/common/settings-docs.h.in:271
msgid ""
"If non-zero, instruct pppd to request that the peer send packets no larger "
"than the specified size.  If non-zero, the MRU should be between 128 and "
"16384."
msgstr ""

#: ../clients/common/settings-docs.h.in:272
msgid ""
"If non-zero, instruct pppd to send packets no larger than the specified size."
msgstr ""

#: ../clients/common/settings-docs.h.in:273
msgid "If TRUE, Van Jacobsen TCP header compression will not be requested."
msgstr ""

#: ../clients/common/settings-docs.h.in:274
msgid ""
"If TRUE, do not require the other side (usually the PPP server) to "
"authenticate itself to the client.  If FALSE, require authentication from "
"the remote side.  In almost all cases, this should be TRUE."
msgstr ""

#: ../clients/common/settings-docs.h.in:275
msgid "If TRUE, BSD compression will not be requested."
msgstr ""

#: ../clients/common/settings-docs.h.in:276
msgid "If TRUE, \"deflate\" compression will not be requested."
msgstr ""

#: ../clients/common/settings-docs.h.in:277
msgid "If TRUE, the CHAP authentication method will not be used."
msgstr ""

#: ../clients/common/settings-docs.h.in:278
msgid "If TRUE, the EAP authentication method will not be used."
msgstr ""

#: ../clients/common/settings-docs.h.in:279
msgid "If TRUE, the MSCHAP authentication method will not be used."
msgstr ""

#: ../clients/common/settings-docs.h.in:280
msgid "If TRUE, the MSCHAPv2 authentication method will not be used."
msgstr ""

#: ../clients/common/settings-docs.h.in:281
msgid "If TRUE, the PAP authentication method will not be used."
msgstr ""

#: ../clients/common/settings-docs.h.in:282
msgid ""
"If TRUE, MPPE (Microsoft Point-to-Point Encryption) will be required for the "
"PPP session.  If either 64-bit or 128-bit MPPE is not available the session "
"will fail.  Note that MPPE is not used on mobile broadband connections."
msgstr ""

#: ../clients/common/settings-docs.h.in:283
msgid ""
"If TRUE, 128-bit MPPE (Microsoft Point-to-Point Encryption) will be required "
"for the PPP session, and the \"require-mppe\" property must also be set to "
"TRUE.  If 128-bit MPPE is not available the session will fail."
msgstr ""

#: ../clients/common/settings-docs.h.in:284
msgid ""
"If given, specifies the parent interface name on which this PPPoE connection "
"should be created.  If this property is not specified, the connection is "
"activated on the interface specified in \"interface-name\" of "
"NMSettingConnection."
msgstr ""

#: ../clients/common/settings-docs.h.in:285
msgid "Password used to authenticate with the PPPoE service."
msgstr ""

#: ../clients/common/settings-docs.h.in:287
msgid ""
"If specified, instruct PPPoE to only initiate sessions with access "
"concentrators that provide the specified service.  For most providers, this "
"should be left blank.  It is only required if there are multiple access "
"concentrators or a specific service is known to be required."
msgstr ""

#: ../clients/common/settings-docs.h.in:288
msgid "Username used to authenticate with the PPPoE service."
msgstr ""

#: ../clients/common/settings-docs.h.in:289
msgid "Whether the proxy configuration is for browser only."
msgstr ""

#: ../clients/common/settings-docs.h.in:290
msgid ""
"Method for proxy configuration, Default is NM_SETTING_PROXY_METHOD_NONE (0)"
msgstr ""

#: ../clients/common/settings-docs.h.in:291
msgid "PAC script for the connection."
msgstr ""

#: ../clients/common/settings-docs.h.in:292
msgid "PAC URL for obtaining PAC file."
msgstr ""

#: ../clients/common/settings-docs.h.in:293
msgid ""
"Speed to use for communication over the serial port.  Note that this value "
"usually has no effect for mobile broadband modems as they generally ignore "
"speed settings and use the highest available speed."
msgstr ""

#: ../clients/common/settings-docs.h.in:294
msgid "Byte-width of the serial communication. The 8 in \"8n1\" for example."
msgstr ""

#: ../clients/common/settings-docs.h.in:295
msgid "Parity setting of the serial port."
msgstr ""

#: ../clients/common/settings-docs.h.in:296
msgid "Time to delay between each byte sent to the modem, in microseconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:297
msgid ""
"Number of stop bits for communication on the serial port.  Either 1 or 2. "
"The 1 in \"8n1\" for example."
msgstr ""

#: ../clients/common/settings-docs.h.in:298
msgid ""
"Whether to autoprobe virtual functions by a compatible driver. If set to "
"NM_TERNARY_TRUE (1), the kernel will try to bind VFs to a compatible driver "
"and if this succeeds a new network interface will be instantiated for each "
"VF. If set to NM_TERNARY_FALSE (0), VFs will not be claimed and no network "
"interfaces will be created for them. When set to NM_TERNARY_DEFAULT (-1), "
"the global default is used; in case the global default is unspecified it is "
"assumed to be NM_TERNARY_TRUE (1)."
msgstr ""

#: ../clients/common/settings-docs.h.in:299
msgid ""
"The total number of virtual functions to create. Note that when the sriov "
"setting is present NetworkManager enforces the number of virtual functions "
"on the interface also when it is zero. To prevent any changes to SR-IOV "
"parameters don't add a sriov setting to the connection."
msgstr ""

#: ../clients/common/settings-docs.h.in:300
msgid ""
"Array of virtual function descriptors. Each VF descriptor is a dictionary "
"mapping attribute names to GVariant values. The 'index' entry is mandatory "
"for each VF. When represented as string a VF is in the form: \"INDEX "
"[ATTR=VALUE[ ATTR=VALUE]...]\". for example: \"2 mac=00:11:22:33:44:55 spoof-"
"check=true\". Multiple VFs can be specified using a comma as separator. "
"Currently the following attributes are supported: mac, spoof-check, trust, "
"min-tx-rate, max-tx-rate, vlans. The \"vlans\" attribute is represented as a "
"semicolon-separated list of VLAN descriptors, where each descriptor has the "
"form \"ID[.PRIORITY[.PROTO]]\". PROTO can be either 'q' for 802.1Q (the "
"default) or 'ad' for 802.1ad."
msgstr ""

#: ../clients/common/settings-docs.h.in:301
msgid "Array of TC queueing disciplines."
msgstr ""

#: ../clients/common/settings-docs.h.in:302
msgid "Array of TC traffic filters."
msgstr ""

#: ../clients/common/settings-docs.h.in:303
msgid ""
"The JSON configuration for the team network interface.  The property should "
"contain raw JSON configuration data suitable for teamd, because the value is "
"passed directly to teamd. If not specified, the default configuration is "
"used.  See man teamd.conf for the format details."
msgstr ""

#: ../clients/common/settings-docs.h.in:304
#: ../clients/common/settings-docs.h.in:322
msgid ""
"Link watchers configuration for the connection: each link watcher is defined "
"by a dictionary, whose keys depend upon the selected link watcher. Available "
"link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified "
"in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-"
"up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-"
"max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', "
"'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man "
"for more details."
msgstr ""

#: ../clients/common/settings-docs.h.in:305
msgid "Corresponds to the teamd mcast_rejoin.count."
msgstr ""

#: ../clients/common/settings-docs.h.in:306
msgid "Corresponds to the teamd mcast_rejoin.interval."
msgstr ""

#: ../clients/common/settings-docs.h.in:307
msgid "Corresponds to the teamd notify_peers.count."
msgstr ""

#: ../clients/common/settings-docs.h.in:308
msgid "Corresponds to the teamd notify_peers.interval."
msgstr ""

#: ../clients/common/settings-docs.h.in:309
msgid ""
"Corresponds to the teamd runner.name. Permitted values are: \"roundrobin\", "
"\"broadcast\", \"activebackup\", \"loadbalance\", \"lacp\", \"random\". When "
"setting the runner, all the properties specific to the runner will be reset "
"to the default value; all the properties specific to other runners will be "
"set to an empty value (or if not possible to a default value)."
msgstr ""

#: ../clients/common/settings-docs.h.in:310
msgid "Corresponds to the teamd runner.active."
msgstr ""

#: ../clients/common/settings-docs.h.in:311
msgid "Corresponds to the teamd runner.agg_select_policy."
msgstr ""

#: ../clients/common/settings-docs.h.in:312
msgid "Corresponds to the teamd runner.fast_rate."
msgstr ""

#: ../clients/common/settings-docs.h.in:313
msgid "Corresponds to the teamd runner.hwaddr_policy."
msgstr ""

#: ../clients/common/settings-docs.h.in:314
msgid "Corresponds to the teamd runner.min_ports."
msgstr ""

#: ../clients/common/settings-docs.h.in:315
msgid "Corresponds to the teamd runner.sys_prio."
msgstr ""

#: ../clients/common/settings-docs.h.in:316
msgid "Corresponds to the teamd runner.tx_balancer.name."
msgstr ""

#: ../clients/common/settings-docs.h.in:317
msgid "Corresponds to the teamd runner.tx_balancer.interval."
msgstr ""

#: ../clients/common/settings-docs.h.in:318
msgid "Corresponds to the teamd runner.tx_hash."
msgstr ""

#: ../clients/common/settings-docs.h.in:319
msgid ""
"The JSON configuration for the team port. The property should contain raw "
"JSON configuration data suitable for teamd, because the value is passed "
"directly to teamd. If not specified, the default configuration is used. See "
"man teamd.conf for the format details."
msgstr ""

#: ../clients/common/settings-docs.h.in:320
msgid "Corresponds to the teamd ports.PORTIFNAME.lacp_key."
msgstr ""

#: ../clients/common/settings-docs.h.in:321
msgid "Corresponds to the teamd ports.PORTIFNAME.lacp_prio."
msgstr ""

#: ../clients/common/settings-docs.h.in:323
msgid "Corresponds to the teamd ports.PORTIFNAME.prio."
msgstr ""

#: ../clients/common/settings-docs.h.in:324
msgid ""
"Corresponds to the teamd ports.PORTIFNAME.queue_id. When set to -1 means the "
"parameter is skipped from the json config."
msgstr ""

#: ../clients/common/settings-docs.h.in:325
msgid "Corresponds to the teamd ports.PORTIFNAME.sticky."
msgstr ""

#: ../clients/common/settings-docs.h.in:326
msgid ""
"The group ID which will own the device. If set to NULL everyone will be able "
"to use the device."
msgstr ""

#: ../clients/common/settings-docs.h.in:327
msgid ""
"The operating mode of the virtual device. Allowed values are "
"NM_SETTING_TUN_MODE_TUN (1) to create a layer 3 device and "
"NM_SETTING_TUN_MODE_TAP (2) to create an Ethernet-like layer 2 one."
msgstr ""

#: ../clients/common/settings-docs.h.in:328
msgid ""
"If the property is set to TRUE, the interface will support multiple file "
"descriptors (queues) to parallelize packet sending or receiving. Otherwise, "
"the interface will only support a single queue."
msgstr ""

#: ../clients/common/settings-docs.h.in:329
msgid ""
"The user ID which will own the device. If set to NULL everyone will be able "
"to use the device."
msgstr ""

#: ../clients/common/settings-docs.h.in:330
msgid ""
"If TRUE the interface will prepend a 4 byte header describing the physical "
"interface to the packets."
msgstr ""

#: ../clients/common/settings-docs.h.in:331
msgid ""
"If TRUE the IFF_VNET_HDR the tunnel packets will include a virtio network "
"header."
msgstr ""

#: ../clients/common/settings-docs.h.in:332
msgid ""
"A dictionary of key/value pairs with user data. This data is ignored by "
"NetworkManager and can be used at the users discretion. The keys only "
"support a strict ascii format, but the values can be arbitrary UTF8 strings "
"up to a certain length."
msgstr ""

#: ../clients/common/settings-docs.h.in:333
msgid ""
"For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p "
"priorities.  The mapping is given in the format \"from:to\" where both \"from"
"\" and \"to\" are unsigned integers, ie \"7:3\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:334
msgid ""
"One or more flags which control the behavior and features of the VLAN "
"interface.  Flags include NM_VLAN_FLAG_REORDER_HEADERS (0x1) (reordering of "
"output packet headers), NM_VLAN_FLAG_GVRP (0x2) (use of the GVRP protocol), "
"and NM_VLAN_FLAG_LOOSE_BINDING (0x4) (loose binding of the interface to its "
"master device's operating state). NM_VLAN_FLAG_MVRP (0x8) (use of the MVRP "
"protocol). The default value of this property is "
"NM_VLAN_FLAG_REORDER_HEADERS, but it used to be 0. To preserve backward "
"compatibility, the default-value in the D-Bus API continues to be 0 and a "
"missing property on D-Bus is still considered as 0."
msgstr ""

#: ../clients/common/settings-docs.h.in:335
msgid ""
"The VLAN identifier that the interface created by this connection should be "
"assigned. The valid range is from 0 to 4094, without the reserved id 4095."
msgstr ""

#: ../clients/common/settings-docs.h.in:336
msgid ""
"For incoming packets, a list of mappings from 802.1p priorities to Linux SKB "
"priorities.  The mapping is given in the format \"from:to\" where both \"from"
"\" and \"to\" are unsigned integers, ie \"7:3\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:337
msgid ""
"If given, specifies the parent interface name or parent connection UUID from "
"which this VLAN interface should be created.  If this property is not "
"specified, the connection must contain an \"802-3-ethernet\" setting with a "
"\"mac-address\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:338
msgid ""
"Dictionary of key/value pairs of VPN plugin specific data.  Both keys and "
"values must be strings."
msgstr ""

#: ../clients/common/settings-docs.h.in:339
msgid ""
"If the VPN service supports persistence, and this property is TRUE, the VPN "
"will attempt to stay connected across link changes and outages, until "
"explicitly disconnected."
msgstr ""

#: ../clients/common/settings-docs.h.in:340
msgid ""
"Dictionary of key/value pairs of VPN plugin specific secrets like passwords "
"or private keys.  Both keys and values must be strings."
msgstr ""

#: ../clients/common/settings-docs.h.in:341
msgid ""
"D-Bus service name of the VPN plugin that this setting uses to connect to "
"its network.  i.e. org.freedesktop.NetworkManager.vpnc for the vpnc plugin."
msgstr ""

#: ../clients/common/settings-docs.h.in:342
msgid ""
"Timeout for the VPN service to establish the connection. Some services may "
"take quite a long time to connect. Value of 0 means a default timeout, which "
"is 60 seconds (unless overridden by vpn.timeout in configuration file). "
"Values greater than zero mean timeout in seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:343
msgid ""
"If the VPN connection requires a user name for authentication, that name "
"should be provided here.  If the connection is available to more than one "
"user, and the VPN requires each user to supply a different name, then leave "
"this property empty.  If this property is empty, NetworkManager will "
"automatically supply the username of the user which requested the VPN "
"connection."
msgstr ""

#: ../clients/common/settings-docs.h.in:344
msgid "Specifies the lifetime in seconds of FDB entries learnt by the kernel."
msgstr ""

#: ../clients/common/settings-docs.h.in:345
msgid ""
"Specifies the UDP destination port to communicate to the remote VXLAN tunnel "
"endpoint."
msgstr ""

#: ../clients/common/settings-docs.h.in:346
msgid ""
"Specifies the VXLAN Network Identifier (or VXLAN Segment Identifier) to use."
msgstr ""

#: ../clients/common/settings-docs.h.in:347
msgid "Specifies whether netlink LL ADDR miss notifications are generated."
msgstr ""

#: ../clients/common/settings-docs.h.in:348
msgid "Specifies whether netlink IP ADDR miss notifications are generated."
msgstr ""

#: ../clients/common/settings-docs.h.in:349
msgid ""
"Specifies whether unknown source link layer addresses and IP addresses are "
"entered into the VXLAN device forwarding database."
msgstr ""

#: ../clients/common/settings-docs.h.in:350
msgid ""
"Specifies the maximum number of FDB entries. A value of zero means that the "
"kernel will store unlimited entries."
msgstr ""

#: ../clients/common/settings-docs.h.in:351
msgid "If given, specifies the source IP address to use in outgoing packets."
msgstr ""

#: ../clients/common/settings-docs.h.in:352
msgid ""
"If given, specifies the parent interface name or parent connection UUID."
msgstr ""

#: ../clients/common/settings-docs.h.in:353
msgid "Specifies whether ARP proxy is turned on."
msgstr ""

#: ../clients/common/settings-docs.h.in:354
msgid ""
"Specifies the unicast destination IP address to use in outgoing packets when "
"the destination link layer address is not known in the VXLAN device "
"forwarding database, or the multicast IP address to join."
msgstr ""

#: ../clients/common/settings-docs.h.in:355
msgid "Specifies whether route short circuit is turned on."
msgstr ""

#: ../clients/common/settings-docs.h.in:356
msgid ""
"Specifies the maximum UDP source port to communicate to the remote VXLAN "
"tunnel endpoint."
msgstr ""

#: ../clients/common/settings-docs.h.in:357
msgid ""
"Specifies the minimum UDP source port to communicate to the remote VXLAN "
"tunnel endpoint."
msgstr ""

#: ../clients/common/settings-docs.h.in:358
msgid "Specifies the TOS value to use in outgoing packets."
msgstr ""

#: ../clients/common/settings-docs.h.in:359
msgid "Specifies the time-to-live value to use in outgoing packets."
msgstr ""

#: ../clients/common/settings-docs.h.in:360
msgid ""
"If specified, this connection will only apply to the WiMAX device whose MAC "
"address matches. This property does not change the MAC address of the device "
"(known as MAC spoofing). Deprecated: 1"
msgstr ""

#: ../clients/common/settings-docs.h.in:361
msgid ""
"Network Service Provider (NSP) name of the WiMAX network this connection "
"should use. Deprecated: 1"
msgstr ""

#: ../clients/common/settings-docs.h.in:362
msgid ""
"IEEE 802.15.4 channel. A positive integer or -1, meaning \"do not set, use "
"whatever the device is already set to\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:363
msgid ""
"If specified, this connection will only apply to the IEEE 802.15.4 (WPAN) "
"MAC layer device whose permanent MAC address matches."
msgstr ""

#: ../clients/common/settings-docs.h.in:364
msgid ""
"IEEE 802.15.4 channel page. A positive integer or -1, meaning \"do not set, "
"use whatever the device is already set to\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:365
msgid "IEEE 802.15.4 Personal Area Network (PAN) identifier."
msgstr ""

#: ../clients/common/settings-docs.h.in:366
msgid "Short IEEE 802.15.4 address to be used within a restricted environment."
msgstr ""

#: ../clients/nm-online.c:90
msgid "Connecting"
msgstr ""

#: ../clients/nm-online.c:206
#, c-format
msgid "Error: timeout creating NMClient object\n"
msgstr ""

#: ../clients/nm-online.c:226
#, fuzzy, c-format
msgid "Error: Could not create NMClient object: %s\n"
msgstr "Sertifikaati ei saa dešifreerida: %s"

#: ../clients/nm-online.c:252
msgid "Don't print anything"
msgstr ""

#: ../clients/nm-online.c:253
msgid "Wait for NetworkManager startup instead of a connection"
msgstr ""

#: ../clients/nm-online.c:254
msgid ""
"Time to wait for a connection, in seconds (without the option, default value "
"is 30)"
msgstr ""

#: ../clients/nm-online.c:255
msgid "Exit immediately if NetworkManager is not running or connecting"
msgstr ""

#: ../clients/nm-online.c:275
msgid ""
"Waits for NetworkManager to finish activating startup network connections."
msgstr ""

#: ../clients/nm-online.c:282 ../clients/nm-online.c:288
#, fuzzy
msgid "Invalid option.  Please use --help to see a list of valid options."
msgstr ""
"Vigane valik.  Kasuta --help võtit sobivate valikute nimistu nägemiseks.\n"

#: ../clients/tui/newt/nmt-newt-utils.c:177 ../clients/tui/nmt-editor.c:429
#: ../clients/tui/nmt-password-dialog.c:174
#: ../clients/tui/nmt-route-editor.c:122 ../clients/tui/nmtui-hostname.c:69
#: ../clients/tui/nmtui.c:134
msgid "OK"
msgstr ""

#: ../clients/tui/newt/nmt-newt-utils.c:325
#: ../clients/tui/newt/nmt-newt-utils.c:357
#, fuzzy, c-format
msgid "Could not create temporary file: %s"
msgstr "Sertifikaati ei saa dešifreerida: %s"

#: ../clients/tui/newt/nmt-newt-utils.c:363
#, c-format
msgid "Editor failed: %s"
msgstr ""

#: ../clients/tui/newt/nmt-newt-utils.c:369
#, fuzzy, c-format
msgid "Could not re-read file: %s"
msgstr "Sertifikaati ei saa dešifreerida: %s"

#: ../clients/tui/nm-editor-utils.c:144 ../libnm-glib/nm-device.c:1820
#: ../libnm/nm-device.c:1380
msgid "Ethernet"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:148
#, c-format
msgid "Ethernet connection %d"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:152 ../libnm-glib/nm-device.c:1822
#: ../libnm/nm-device.c:1382
msgid "Wi-Fi"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:156
#, c-format
msgid "Wi-Fi connection %d"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:161 ../libnm-core/nm-connection.c:2376
#: ../libnm-glib/nm-device.c:1832 ../libnm/nm-device.c:1398
msgid "InfiniBand"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:165
#, c-format
msgid "InfiniBand connection %d"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:170 ../libnm-glib/nm-device.c:1830
#: ../libnm/nm-device.c:1396
msgid "Mobile Broadband"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:173
#, c-format
msgid "Mobile broadband connection %d"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:179 ../clients/tui/nmt-page-dsl.c:62
msgid "DSL"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:183
#, c-format
msgid "DSL connection %d"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:188 ../libnm-core/nm-connection.c:2368
#: ../libnm-glib/nm-device.c:1834 ../libnm-util/nm-connection.c:1623
#: ../libnm/nm-device.c:1400
#: ../src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-reader.c:4794
msgid "Bond"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:192
#, c-format
msgid "Bond connection %d"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:197 ../libnm-core/nm-connection.c:2372
#: ../libnm-glib/nm-device.c:1838 ../libnm-util/nm-connection.c:1627
#: ../libnm/nm-device.c:1404
#: ../src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-reader.c:5130
msgid "Bridge"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:202
#, c-format
msgid "Bridge connection %d"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:206 ../libnm-core/nm-connection.c:2370
#: ../libnm-glib/nm-device.c:1836 ../libnm-util/nm-connection.c:1625
#: ../libnm/nm-device.c:1402
#: ../src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-reader.c:4897
msgid "Team"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:211
#, c-format
msgid "Team connection %d"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:215 ../clients/tui/nmt-page-vlan.c:82
#: ../libnm-core/nm-connection.c:2374 ../libnm-glib/nm-device.c:1840
#: ../libnm-util/nm-connection.c:1629 ../libnm/nm-device.c:1406
msgid "VLAN"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:219
#, c-format
msgid "VLAN connection %d"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:223 ../clients/tui/nmt-page-ip-tunnel.c:136
msgid "IP tunnel"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:227
#, c-format
msgid "IP tunnel connection %d"
msgstr ""

#: ../clients/tui/nm-editor-utils.c:242
#, c-format
msgid "VPN connection %d"
msgstr ""

#: ../clients/tui/nmt-device-entry.c:368
msgid "Select..."
msgstr ""

#: ../clients/tui/nmt-edit-connection-list.c:110
msgid "Add"
msgstr ""

#: ../clients/tui/nmt-edit-connection-list.c:113
#: ../clients/tui/nmt-page-ip4.c:169 ../clients/tui/nmt-page-ip6.c:167
#: ../clients/tui/nmt-page-team-port.c:109 ../clients/tui/nmt-page-team.c:173
msgid "Edit..."
msgstr ""

#: ../clients/tui/nmt-edit-connection-list.c:116
#: ../clients/tui/nmtui-edit.c:529
msgid "Delete"
msgstr ""

#: ../clients/tui/nmt-editor-section.c:103
msgid "Hide"
msgstr ""

#: ../clients/tui/nmt-editor-section.c:103
msgid "Show"
msgstr ""

#: ../clients/tui/nmt-editor.c:98
#, c-format
msgid "Could not create editor for connection '%s' of type '%s'."
msgstr ""

#: ../clients/tui/nmt-editor.c:102
#, c-format
msgid "Could not create editor for invalid connection '%s'."
msgstr ""

#: ../clients/tui/nmt-editor.c:112
msgid "Edit Connection"
msgstr ""

#: ../clients/tui/nmt-editor.c:173
#, fuzzy, c-format
msgid "Unable to save connection: %s"
msgstr "IV määramine dešifreerimiseks nurjus: %s / %s."

#: ../clients/tui/nmt-editor.c:187
#, c-format
msgid "Unable to add new connection: %s"
msgstr ""

#: ../clients/tui/nmt-editor.c:332
msgid "Profile name"
msgstr ""

#: ../clients/tui/nmt-editor.c:343
msgid "Ethernet device"
msgstr ""

#: ../clients/tui/nmt-editor.c:345
msgid "Device"
msgstr ""

#. And finally the bottom widgets
#: ../clients/tui/nmt-editor.c:405
msgid "Automatically connect"
msgstr ""

#: ../clients/tui/nmt-editor.c:411
msgid "Available to all users"
msgstr ""

#: ../clients/tui/nmt-editor.c:426 ../clients/tui/nmt-password-dialog.c:171
#: ../clients/tui/nmt-route-editor.c:115 ../clients/tui/nmtui-edit.c:220
#: ../clients/tui/nmtui-edit.c:528 ../clients/tui/nmtui-hostname.c:67
msgid "Cancel"
msgstr ""

#: ../clients/tui/nmt-mtu-entry.c:86 ../clients/tui/nmt-mtu-entry.c:117
msgid "bytes"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:85
msgid "Round-robin"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:86
msgid "Active Backup"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:87
msgid "XOR"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:88
msgid "Broadcast"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:89
msgid "802.3ad"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:90
msgid "Adaptive Transmit Load Balancing (tlb)"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:91
msgid "Adaptive Load Balancing (alb)"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:97
msgid "MII (recommended)"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:98
msgid "ARP"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:359
msgid "BOND"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:363 ../clients/tui/nmt-page-bridge.c:85
#: ../clients/tui/nmt-page-team.c:152
msgid "Slaves"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:375 ../clients/tui/nmt-page-ip-tunnel.c:148
#: ../clients/tui/nmt-page-wifi.c:230
msgid "Mode"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:381
msgid "Primary"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:387
msgid "Link monitoring"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:393 ../clients/tui/nmt-page-bond.c:400
#: ../clients/tui/nmt-page-bond.c:407 ../clients/tui/nmt-page-bond.c:414
msgctxt "milliseconds"
msgid "ms"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:394 ../clients/tui/nmt-page-bond.c:415
msgid "Monitoring frequency"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:401
msgid "Link up delay"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:408
msgid "Link down delay"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:421
msgid "ARP targets"
msgstr ""

#: ../clients/tui/nmt-page-bond.c:428 ../clients/tui/nmt-page-ethernet.c:77
#: ../clients/tui/nmt-page-vlan.c:110 ../clients/tui/nmt-page-wifi.c:364
msgid "Cloned MAC address"
msgstr ""

#: ../clients/tui/nmt-page-bridge-port.c:60
msgid "BRIDGE PORT"
msgstr ""

#: ../clients/tui/nmt-page-bridge-port.c:67
#: ../clients/tui/nmt-page-bridge.c:118
msgid "Priority"
msgstr ""

#: ../clients/tui/nmt-page-bridge-port.c:73
msgid "Path cost"
msgstr ""

#: ../clients/tui/nmt-page-bridge-port.c:75
msgid "Hairpin mode"
msgstr ""

#: ../clients/tui/nmt-page-bridge.c:81
msgid "BRIDGE"
msgstr ""

#: ../clients/tui/nmt-page-bridge.c:96 ../clients/tui/nmt-page-bridge.c:127
#: ../clients/tui/nmt-page-bridge.c:137 ../clients/tui/nmt-page-bridge.c:147
msgid "seconds"
msgstr ""

#: ../clients/tui/nmt-page-bridge.c:97
msgid "Aging time"
msgstr ""

#: ../clients/tui/nmt-page-bridge.c:99
msgid "Enable IGMP snooping"
msgstr ""

#: ../clients/tui/nmt-page-bridge.c:105
msgid "Enable STP (Spanning Tree Protocol)"
msgstr ""

#: ../clients/tui/nmt-page-bridge.c:128
msgid "Forward delay"
msgstr ""

#: ../clients/tui/nmt-page-bridge.c:138
msgid "Hello time"
msgstr ""

#: ../clients/tui/nmt-page-bridge.c:148
msgid "Max age"
msgstr ""

#: ../clients/tui/nmt-page-bridge.c:154
msgid "Group forward mask"
msgstr ""

#: ../clients/tui/nmt-page-ethernet.c:70
msgid "ETHERNET"
msgstr ""

#: ../clients/tui/nmt-page-ethernet.c:83
#: ../clients/tui/nmt-page-infiniband.c:94
#: ../clients/tui/nmt-page-ip-tunnel.c:186 ../clients/tui/nmt-page-vlan.c:116
#: ../clients/tui/nmt-page-wifi.c:370
msgid "MTU"
msgstr ""

#: ../clients/tui/nmt-page-infiniband.c:47
msgid "Datagram"
msgstr ""

#: ../clients/tui/nmt-page-infiniband.c:48
msgid "Connected"
msgstr ""

#: ../clients/tui/nmt-page-infiniband.c:81
msgid "INFINIBAND"
msgstr ""

#: ../clients/tui/nmt-page-infiniband.c:88
msgid "Transport mode"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:38
msgid "Disabled"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:39 ../clients/tui/nmt-page-ip6.c:39
msgid "Automatic"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:40 ../clients/tui/nmt-page-ip6.c:41
msgid "Link-Local"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:41 ../clients/tui/nmt-page-ip6.c:42
msgid "Manual"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:42
msgid "Shared"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:82 ../clients/tui/nmt-page-ip6.c:82
msgid "(No custom routes)"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:85 ../clients/tui/nmt-page-ip6.c:85
#, c-format
msgid "One custom route"
msgid_plural "%d custom routes"
msgstr[0] ""
msgstr[1] ""

#: ../clients/tui/nmt-page-ip4.c:128
msgid "IPv4 CONFIGURATION"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:136 ../clients/tui/nmt-page-ip6.c:136
msgid "Addresses"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:150 ../clients/tui/nmt-page-ip6.c:150
msgid "DNS servers"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:156 ../clients/tui/nmt-page-ip6.c:156
msgid "Search domains"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:171 ../clients/tui/nmt-page-ip6.c:169
msgid "Routing"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:173 ../clients/tui/nmt-page-ip6.c:171
msgid "Never use this network for default route"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:179 ../clients/tui/nmt-page-ip6.c:177
msgid "Ignore automatically obtained routes"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:185 ../clients/tui/nmt-page-ip6.c:183
msgid "Ignore automatically obtained DNS parameters"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:193
msgid "Require IPv4 addressing for this connection"
msgstr ""

#: ../clients/tui/nmt-page-ip6.c:38
msgid "Ignore"
msgstr ""

#: ../clients/tui/nmt-page-ip6.c:40
msgid "Automatic (DHCP-only)"
msgstr ""

#: ../clients/tui/nmt-page-ip6.c:128
msgid "IPv6 CONFIGURATION"
msgstr ""

#: ../clients/tui/nmt-page-ip6.c:191
msgid "Require IPv6 addressing for this connection"
msgstr ""

#. The order must match the NM_IP_TUNNEL_MODE_* enum
#: ../clients/tui/nmt-page-ip-tunnel.c:78
msgid "IPIP"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:79
msgid "GRE"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:80
msgid "SIT"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:81
msgid "ISATAP"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:82
msgid "VTI"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:83
msgid "IP6IP6"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:84
msgid "IPIP6"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:85
msgid "IP6GRE"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:86
msgid "VTI6"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:150 ../clients/tui/nmt-page-vlan.c:87
msgid "Parent"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:157
msgid "Local IP"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:163
msgid "Remote IP"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:169
msgid "Input key"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:176
msgid "Output key"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:131
msgid "PPP CONFIGURATION"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:140
msgid "Allowed authentication methods:"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:147
msgid "EAP"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:155
msgid "PAP"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:163
msgid "CHAP"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:171
msgid "MSCHAPv2"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:179
msgid "MSCHAP"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:195
msgid "Use point-to-point encryption (MPPE)"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:207
msgid "Require 128-bit encryption"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:217
msgid "Use stateful MPPE"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:229
msgid "Allow BSD data compression"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:237
msgid "Allow Deflate data compression"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:245
msgid "Use TCP header compression"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:255
msgid "Send PPP echo packets"
msgstr ""

#: ../clients/tui/nmt-page-team-port.c:92
msgid "TEAM PORT"
msgstr ""

#: ../clients/tui/nmt-page-team-port.c:99 ../clients/tui/nmt-page-team.c:163
msgid "JSON configuration"
msgstr ""

#: ../clients/tui/nmt-page-team.c:145
msgid "TEAM"
msgstr ""

#: ../clients/tui/nmt-page-vlan.c:102
msgid "VLAN id"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:64
msgctxt "Wi-Fi"
msgid "Client"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:65
msgid "Access Point"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:66
msgid "Ad-Hoc Network"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:71
msgctxt "Wi-Fi"
msgid "Automatic"
msgstr ""

#. 802.11a Wi-Fi network
#: ../clients/tui/nmt-page-wifi.c:73
msgid "A (5 GHz)"
msgstr ""

#. 802.11b / 802.11g Wi-Fi network
#: ../clients/tui/nmt-page-wifi.c:75
msgid "B/G (2.4 GHz)"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:80
msgctxt "Wi-Fi security"
msgid "None"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:81
msgid "WPA & WPA2 Personal"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:82
msgid "WPA & WPA2 Enterprise"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:83
msgid "WEP 40/128-bit Key (Hex or ASCII)"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:84
msgid "WEP 128-bit Passphrase"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:85
msgid "Dynamic WEP (802.1x)"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:86
msgid "LEAP"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:91
msgctxt "WEP key index"
msgid "1 (Default)"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:92
msgctxt "WEP key index"
msgid "2"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:93
msgctxt "WEP key index"
msgid "3"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:94
msgctxt "WEP key index"
msgid "4"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:99
msgid "Open System"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:100
msgid "Shared Key"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:214
msgid "WI-FI"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:256
msgid "Channel"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:261
msgid "Security"
msgstr ""

#. "wpa-enterprise"
#. FIXME
#: ../clients/tui/nmt-page-wifi.c:282
msgid "(No support for wpa-enterprise yet...)"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:292 ../clients/tui/nmt-page-wifi.c:311
msgid "WEP index"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:300 ../clients/tui/nmt-page-wifi.c:319
msgid "Authentication"
msgstr ""

#. "dynamic-wep"
#. FIXME
#: ../clients/tui/nmt-page-wifi.c:325
msgid "(No support for dynamic-wep yet...)"
msgstr ""

#: ../clients/tui/nmt-page-wifi.c:358
msgid "BSSID"
msgstr ""

#: ../clients/tui/nmt-password-fields.c:128
msgid "Ask for this password every time"
msgstr ""

#: ../clients/tui/nmt-password-fields.c:129
msgid "Show password"
msgstr ""

#: ../clients/tui/nmt-route-table.c:187
msgid "Destination"
msgstr ""

#: ../clients/tui/nmt-route-table.c:187
msgid "Prefix"
msgstr ""

#: ../clients/tui/nmt-route-table.c:196
msgid "Next Hop"
msgstr ""

#: ../clients/tui/nmt-route-table.c:204
msgid "Metric"
msgstr ""

#: ../clients/tui/nmt-route-table.c:224
msgid "No custom routes are defined."
msgstr ""

#: ../clients/tui/nmt-slave-list.c:134
msgid "Select the type of slave connection you wish to add."
msgstr ""

#: ../clients/tui/nmt-widget-list.c:139
msgid "Add..."
msgstr ""

#: ../clients/tui/nmt-widget-list.c:202
msgid "Remove"
msgstr ""

#: ../clients/tui/nmtui-connect.c:55
msgid ""
"openconnect will be run to authenticate.\n"
"It will return to nmtui when completed."
msgstr ""

#: ../clients/tui/nmtui-connect.c:69
#, c-format
msgid "Error: openconnect failed: %s"
msgstr ""

#: ../clients/tui/nmtui-connect.c:76
#, c-format
msgid "openconnect failed with status %d"
msgstr ""

#: ../clients/tui/nmtui-connect.c:80
#, c-format
msgid "openconnect failed with signal %d"
msgstr ""

#: ../clients/tui/nmtui-connect.c:183
#, fuzzy, c-format
msgid "Activation failed: %s"
msgstr "Sertifikaadi andmete lähtestamine nurjus: %s"

#: ../clients/tui/nmtui-connect.c:254
msgid "Connecting..."
msgstr ""

#: ../clients/tui/nmtui-connect.c:292 ../clients/tui/nmtui-connect.c:329
#, c-format
msgid "Could not activate connection: %s"
msgstr ""

#: ../clients/tui/nmtui-connect.c:391 ../clients/tui/nmtui-connect.c:440
msgid "Activate"
msgstr ""

#: ../clients/tui/nmtui-connect.c:393
msgid "Deactivate"
msgstr ""

#: ../clients/tui/nmtui-connect.c:445 ../clients/tui/nmtui-edit.c:118
#: ../clients/tui/nmtui.c:128
msgid "Quit"
msgstr ""

#: ../clients/tui/nmtui-connect.c:445 ../clients/tui/nmtui-edit.c:118
msgid "Back"
msgstr ""

#: ../clients/tui/nmtui-connect.c:468
#, c-format
msgid "No such connection '%s'"
msgstr ""

#: ../clients/tui/nmtui-connect.c:470
msgid "Connection is already active"
msgstr ""

#: ../clients/tui/nmtui-edit.c:228
msgid "Create"
msgstr ""

#: ../clients/tui/nmtui-edit.c:370
msgid "Select the type of connection you wish to create."
msgstr ""

#: ../clients/tui/nmtui-edit.c:378
msgid ""
"If you are creating a VPN, and the VPN connection you wish to create does "
"not appear in the list, you may not have the correct VPN plugin installed."
msgstr ""

#: ../clients/tui/nmtui-edit.c:414 ../clients/tui/nmtui-edit.c:430
msgid "New Connection"
msgstr ""

#: ../clients/tui/nmtui-edit.c:469
#, c-format
msgid "Unable to delete connection: %s"
msgstr ""

#: ../clients/tui/nmtui-edit.c:508
#, c-format
msgid "Could not delete connection '%s': %s"
msgstr ""

#: ../clients/tui/nmtui-edit.c:530
#, c-format
msgid "Are you sure you want to delete the connection '%s'?"
msgstr ""

#: ../clients/tui/nmtui-hostname.c:45
msgid "Set Hostname"
msgstr ""

#: ../clients/tui/nmtui-hostname.c:53
msgid "Hostname"
msgstr ""

#. TRANSLATORS: this indicates the result. ie, "I have set the hostname to ..."
#: ../clients/tui/nmtui-hostname.c:116
#, c-format
msgid "Set hostname to '%s'"
msgstr ""

#: ../clients/tui/nmtui-hostname.c:118
#, c-format
msgid "Unable to set hostname: %s"
msgstr ""

#: ../clients/tui/nmtui.c:51 ../clients/tui/nmtui.c:54
msgid "connection"
msgstr ""

#: ../clients/tui/nmtui.c:52
msgid "Edit a connection"
msgstr ""

#: ../clients/tui/nmtui.c:55
msgid "Activate a connection"
msgstr ""

#: ../clients/tui/nmtui.c:57
msgid "new hostname"
msgstr ""

#: ../clients/tui/nmtui.c:58
msgid "Set system hostname"
msgstr ""

#: ../clients/tui/nmtui.c:102
#, fuzzy
msgid "NetworkManager TUI"
msgstr "# Loodud NetworkManager'i poolt\n"

#: ../clients/tui/nmtui.c:110
msgid "Please select an option"
msgstr ""

#: ../clients/tui/nmtui.c:158
msgid "Usage"
msgstr ""

#: ../clients/tui/nmtui.c:239
msgid "Could not parse arguments"
msgstr ""

#: ../clients/tui/nmtui.c:249
#, c-format
msgid "Could not contact NetworkManager: %s.\n"
msgstr ""

#: ../clients/tui/nmtui.c:254
msgid "NetworkManager is not running."
msgstr ""

#: ../libnm-core/nm-crypto.c:214
#, fuzzy, c-format
msgid "PEM key file had no start tag"
msgstr "PEM võtmefaili lõpus ei olnud '%s'."

#: ../libnm-core/nm-crypto.c:222 ../libnm-util/crypto.c:130
#, c-format
msgid "PEM key file had no end tag '%s'."
msgstr "PEM võtmefaili lõpus ei olnud '%s'."

#: ../libnm-core/nm-crypto.c:249 ../libnm-util/crypto.c:160
#, c-format
msgid "Malformed PEM file: Proc-Type was not first tag."
msgstr "Vigane PEM fail: Proc-Type ei olnud esimene silt."

#: ../libnm-core/nm-crypto.c:257 ../libnm-util/crypto.c:168
#, c-format
msgid "Malformed PEM file: unknown Proc-Type tag '%s'."
msgstr "Vigane PEM fail: tundmatu Proc-Type silt '%s'."

#: ../libnm-core/nm-crypto.c:269 ../libnm-util/crypto.c:178
#, c-format
msgid "Malformed PEM file: DEK-Info was not the second tag."
msgstr "Vigane PEM fail: DEK-info ei olnud teine silt."

#: ../libnm-core/nm-crypto.c:280 ../libnm-util/crypto.c:189
#, c-format
msgid "Malformed PEM file: no IV found in DEK-Info tag."
msgstr "Vigane PEM fail: IV ei leitud DEK-Info sildis."

#: ../libnm-core/nm-crypto.c:288 ../libnm-util/crypto.c:196
#, c-format
msgid "Malformed PEM file: invalid format of IV in DEK-Info tag."
msgstr "Vigane PEM fail: IV vigane vorming DEK-Info sildis."

#: ../libnm-core/nm-crypto.c:299 ../libnm-util/crypto.c:211
#, c-format
msgid "Malformed PEM file: unknown private key cipher '%s'."
msgstr "Vigane PEM fail: tunmatu privaatvõtme šiffer '%s'."

#: ../libnm-core/nm-crypto.c:320 ../libnm-util/crypto.c:230
#, c-format
msgid "Could not decode private key."
msgstr "Privaatvõtit ei saa dešifreerida."

#: ../libnm-core/nm-crypto.c:361 ../libnm-util/crypto.c:282
msgid "Failed to find expected PKCS#8 start tag."
msgstr ""

#: ../libnm-core/nm-crypto.c:369 ../libnm-util/crypto.c:290
#, c-format
msgid "Failed to find expected PKCS#8 end tag '%s'."
msgstr ""

#: ../libnm-core/nm-crypto.c:381 ../libnm-util/crypto.c:309
#, fuzzy
msgid "Failed to decode PKCS#8 private key."
msgstr "Privaatvõtit ei saa dešifreerida."

#: ../libnm-core/nm-crypto.c:440 ../libnm-util/crypto.c:351
#, c-format
msgid "IV must be an even number of bytes in length."
msgstr "IV pikkus baitides peab olema paarisarv."

#: ../libnm-core/nm-crypto.c:456 ../libnm-util/crypto.c:365
#, c-format
msgid "IV contains non-hexadecimal digits."
msgstr "IV sisaldab mitte-oktaalarvu."

#: ../libnm-core/nm-crypto.c:532
#, fuzzy, c-format
msgid "IV must contain at least 8 characters"
msgstr "IV sisaldab mitte-oktaalarvu."

#: ../libnm-core/nm-crypto.c:580 ../libnm-util/crypto.c:515
#, fuzzy, c-format
msgid "Unable to determine private key type."
msgstr "Privaatvõtme dešifreerimine nurjus: %d."

#: ../libnm-core/nm-crypto.c:592
#, c-format
msgid "Password provided, but key was not encrypted."
msgstr ""

#: ../libnm-core/nm-crypto.c:653 ../libnm-util/crypto.c:570
#, fuzzy, c-format
msgid "PEM certificate had no start tag '%s'."
msgstr "PEM-sertifikaadil '%s' pole lõpusilti '%s'."

#: ../libnm-core/nm-crypto.c:662 ../libnm-util/crypto.c:579
#, fuzzy, c-format
msgid "PEM certificate had no end tag '%s'."
msgstr "PEM-sertifikaadil '%s' pole lõpusilti '%s'."

#: ../libnm-core/nm-crypto.c:674 ../libnm-util/crypto.c:597
#, c-format
msgid "Failed to decode certificate."
msgstr "Sertifikaadi dešifreerimine nurjus."

#: ../libnm-core/nm-crypto.c:703 ../libnm-core/nm-crypto.c:756
#, c-format
msgid "Certificate file is empty"
msgstr ""

#: ../libnm-core/nm-crypto.c:736
#, fuzzy, c-format
msgid "Failed to recognize certificate"
msgstr "Sertifikaadi dešifreerimine nurjus."

#: ../libnm-core/nm-crypto.c:846
#, fuzzy, c-format
msgid "not a valid private key"
msgstr "Privaatvõtit ei saa dešifreerida."

#: ../libnm-core/nm-crypto-gnutls.c:75 ../libnm-util/crypto_gnutls.c:48
msgid "Failed to initialize the crypto engine."
msgstr "Šifreerimismootori lähtestamine nurjus."

#: ../libnm-core/nm-crypto-gnutls.c:107 ../libnm-core/nm-crypto-nss.c:129
#, c-format
msgid "Unsupported key cipher for decryption"
msgstr ""

#: ../libnm-core/nm-crypto-gnutls.c:117 ../libnm-core/nm-crypto-nss.c:136
#, c-format
msgid "Invalid IV length (must be at least %u)."
msgstr ""

#: ../libnm-core/nm-crypto-gnutls.c:134 ../libnm-util/crypto_gnutls.c:175
#, fuzzy, c-format
msgid "Failed to initialize the decryption cipher context: %s (%s)"
msgstr "Dešifreerimise šifri konteksti lähtestamine nurjus: %s / %s."

#: ../libnm-core/nm-crypto-gnutls.c:146 ../libnm-util/crypto_gnutls.c:184
#, fuzzy, c-format
msgid "Failed to decrypt the private key: %s (%s)"
msgstr "Privaatvõtme dešifreerimine nurjus: %s / %s."

#: ../libnm-core/nm-crypto-gnutls.c:160 ../libnm-core/nm-crypto-nss.c:223
#: ../libnm-util/crypto_gnutls.c:194 ../libnm-util/crypto_nss.c:252
#, fuzzy, c-format
msgid "Failed to decrypt the private key: unexpected padding length."
msgstr "Privaatvõtme dešifreerimine nurjus: %d."

#: ../libnm-core/nm-crypto-gnutls.c:171 ../libnm-core/nm-crypto-nss.c:234
#: ../libnm-util/crypto_gnutls.c:205 ../libnm-util/crypto_nss.c:263
#, fuzzy, c-format
msgid "Failed to decrypt the private key."
msgstr "Privaatvõtme dešifreerimine nurjus: %d."

#: ../libnm-core/nm-crypto-gnutls.c:205 ../libnm-core/nm-crypto-nss.c:289
#, c-format
msgid "Unsupported key cipher for encryption"
msgstr ""

#: ../libnm-core/nm-crypto-gnutls.c:221 ../libnm-util/crypto_gnutls.c:280
#, fuzzy, c-format
msgid "Failed to initialize the encryption cipher context: %s (%s)"
msgstr "Dešifreerimise šifri konteksti lähtestamine nurjus: %s / %s."

#: ../libnm-core/nm-crypto-gnutls.c:247 ../libnm-util/crypto_gnutls.c:289
#, fuzzy, c-format
msgid "Failed to encrypt the data: %s (%s)"
msgstr "Privaatvõtme dešifreerimine nurjus: %s / %s."

#: ../libnm-core/nm-crypto-gnutls.c:272 ../libnm-util/crypto_gnutls.c:329
#, c-format
msgid "Error initializing certificate data: %s"
msgstr "Sertifikaadi andmete lähtestamine nurjus: %s"

#: ../libnm-core/nm-crypto-gnutls.c:294 ../libnm-util/crypto_gnutls.c:351
#, c-format
msgid "Couldn't decode certificate: %s"
msgstr "Sertifikaati ei saa dešifreerida: %s"

#: ../libnm-core/nm-crypto-gnutls.c:321 ../libnm-util/crypto_gnutls.c:375
#, c-format
msgid "Couldn't initialize PKCS#12 decoder: %s"
msgstr ""

#: ../libnm-core/nm-crypto-gnutls.c:334 ../libnm-util/crypto_gnutls.c:388
#, fuzzy, c-format
msgid "Couldn't decode PKCS#12 file: %s"
msgstr "Sertifikaati ei saa dešifreerida: %s"

#: ../libnm-core/nm-crypto-gnutls.c:348 ../libnm-util/crypto_gnutls.c:400
#, fuzzy, c-format
msgid "Couldn't verify PKCS#12 file: %s"
msgstr "Sertifikaati ei saa dešifreerida: %s"

#: ../libnm-core/nm-crypto-gnutls.c:376 ../libnm-util/crypto_gnutls.c:428
#, c-format
msgid "Couldn't initialize PKCS#8 decoder: %s"
msgstr ""

#: ../libnm-core/nm-crypto-gnutls.c:403 ../libnm-util/crypto_gnutls.c:451
#, fuzzy, c-format
msgid "Couldn't decode PKCS#8 file: %s"
msgstr "Sertifikaati ei saa dešifreerida: %s"

#: ../libnm-core/nm-crypto-nss.c:82 ../libnm-util/crypto_nss.c:53
#, c-format
msgid "Failed to initialize the crypto engine: %d."
msgstr "Šifrimootori lähtestamine nurjus: %d."

#: ../libnm-core/nm-crypto-nss.c:148 ../libnm-util/crypto_nss.c:181
#, c-format
msgid "Failed to initialize the decryption cipher slot."
msgstr "Šifripesa lähtestamine nurjus."

#: ../libnm-core/nm-crypto-nss.c:158 ../libnm-util/crypto_nss.c:191
#, c-format
msgid "Failed to set symmetric key for decryption."
msgstr "Sümmeetrilise võtme määramine dešifreerimiseks nurjus."

#: ../libnm-core/nm-crypto-nss.c:168 ../libnm-util/crypto_nss.c:201
#, c-format
msgid "Failed to set IV for decryption."
msgstr "IV määramine dešifreerimiseks nurjus."

#: ../libnm-core/nm-crypto-nss.c:176 ../libnm-util/crypto_nss.c:209
#, c-format
msgid "Failed to initialize the decryption context."
msgstr "Dešifreerimise konteksti lähtestamine nurjus."

#: ../libnm-core/nm-crypto-nss.c:192 ../libnm-util/crypto_nss.c:222
#, c-format
msgid "Failed to decrypt the private key: %d."
msgstr "Privaatvõtme dešifreerimine nurjus: %d."

#: ../libnm-core/nm-crypto-nss.c:200 ../libnm-util/crypto_nss.c:230
#, fuzzy, c-format
msgid "Failed to decrypt the private key: decrypted data too large."
msgstr "Privaatvõtme dešifreerimine nurjus: %d."

#: ../libnm-core/nm-crypto-nss.c:211 ../libnm-util/crypto_nss.c:241
#, c-format
msgid "Failed to finalize decryption of the private key: %d."
msgstr "Privaatvõtme dešifreerimise lõpetamine nurjus: %d."

#: ../libnm-core/nm-crypto-nss.c:300 ../libnm-util/crypto_nss.c:345
#, fuzzy, c-format
msgid "Failed to initialize the encryption cipher slot."
msgstr "Šifripesa lähtestamine nurjus."

#: ../libnm-core/nm-crypto-nss.c:308 ../libnm-util/crypto_nss.c:353
#, fuzzy, c-format
msgid "Failed to set symmetric key for encryption."
msgstr "Sümmeetrilise võtme määramine dešifreerimiseks nurjus."

#: ../libnm-core/nm-crypto-nss.c:316 ../libnm-util/crypto_nss.c:361
#, fuzzy, c-format
msgid "Failed to set IV for encryption."
msgstr "IV määramine dešifreerimiseks nurjus."

#: ../libnm-core/nm-crypto-nss.c:324 ../libnm-util/crypto_nss.c:369
#, fuzzy, c-format
msgid "Failed to initialize the encryption context."
msgstr "Dešifreerimise konteksti lähtestamine nurjus."

#: ../libnm-core/nm-crypto-nss.c:347 ../libnm-util/crypto_nss.c:377
#, fuzzy, c-format
msgid "Failed to encrypt: %d."
msgstr "Privaatvõtme dešifreerimine nurjus: %d."

#: ../libnm-core/nm-crypto-nss.c:355 ../libnm-util/crypto_nss.c:385
#, c-format
msgid "Unexpected amount of data after encrypting."
msgstr ""

#: ../libnm-core/nm-crypto-nss.c:393 ../libnm-util/crypto_nss.c:425
#, c-format
msgid "Couldn't decode certificate: %d"
msgstr "Sertifikaati ei suudetud dekodeerida: %d"

#: ../libnm-core/nm-crypto-nss.c:439
#, c-format
msgid "Password must be UTF-8"
msgstr ""

#: ../libnm-core/nm-crypto-nss.c:462
#, c-format
msgid "Couldn't initialize slot"
msgstr ""

#: ../libnm-core/nm-crypto-nss.c:470 ../libnm-util/crypto_nss.c:489
#, c-format
msgid "Couldn't initialize PKCS#12 decoder: %d"
msgstr ""

#: ../libnm-core/nm-crypto-nss.c:479 ../libnm-util/crypto_nss.c:498
#, fuzzy, c-format
msgid "Couldn't decode PKCS#12 file: %d"
msgstr "Sertifikaati ei suudetud dekodeerida: %d"

#: ../libnm-core/nm-crypto-nss.c:488 ../libnm-util/crypto_nss.c:507
#, fuzzy, c-format
msgid "Couldn't verify PKCS#12 file: %d"
msgstr "Sertifikaati ei suudetud dekodeerida: %d"

#: ../libnm-core/nm-crypto-nss.c:538 ../libnm-util/crypto_nss.c:551
#, fuzzy
msgid "Could not generate random data."
msgstr "Privaatvõtit ei saa dešifreerida."

#: ../libnm-core/nm-connection.c:301
msgid "wrong type; should be a list of strings."
msgstr ""

#: ../libnm-core/nm-connection.c:371
msgid "unknown setting name"
msgstr ""

#: ../libnm-core/nm-connection.c:383
msgid "duplicate setting name"
msgstr ""

#: ../libnm-core/nm-connection.c:1366
msgid "setting not found"
msgstr ""

#: ../libnm-core/nm-connection.c:1432 ../libnm-core/nm-connection.c:1457
#: ../libnm-core/nm-connection.c:1482
msgid "setting is required for non-slave connections"
msgstr ""

#: ../libnm-core/nm-connection.c:1445 ../libnm-core/nm-connection.c:1470
#: ../libnm-core/nm-connection.c:1495
msgid "setting not allowed in slave connection"
msgstr ""

#: ../libnm-core/nm-connection.c:1585
msgid "Unexpected failure to verify the connection"
msgstr ""

#: ../libnm-core/nm-connection.c:1630
msgid "Unexpected failure to normalize the connection"
msgstr ""

#: ../libnm-core/nm-connection.c:2234 ../libnm-core/nm-setting-8021x.c:2571
#: ../libnm-core/nm-setting-8021x.c:2588 ../libnm-core/nm-setting-8021x.c:2619
#: ../libnm-core/nm-setting-8021x.c:2636 ../libnm-core/nm-setting-8021x.c:2678
#: ../libnm-core/nm-setting-8021x.c:2690 ../libnm-core/nm-setting-8021x.c:2708
#: ../libnm-core/nm-setting-8021x.c:2720 ../libnm-core/nm-setting-8021x.c:2744
#: ../libnm-core/nm-setting-8021x.c:2826 ../libnm-core/nm-setting-adsl.c:187
#: ../libnm-core/nm-setting-bluetooth.c:136
#: ../libnm-core/nm-setting-bluetooth.c:194
#: ../libnm-core/nm-setting-bluetooth.c:208 ../libnm-core/nm-setting-cdma.c:157
#: ../libnm-core/nm-setting-connection.c:947
#: ../libnm-core/nm-setting-connection.c:990
#: ../libnm-core/nm-setting-connection.c:1156
#: ../libnm-core/nm-setting-ip-config.c:2492
#: ../libnm-core/nm-setting-ip-tunnel.c:373
#: ../libnm-core/nm-setting-olpc-mesh.c:118
#: ../libnm-core/nm-setting-ovs-patch.c:92 ../libnm-core/nm-setting-pppoe.c:159
#: ../libnm-core/nm-setting-vpn.c:550 ../libnm-core/nm-setting-vxlan.c:358
#: ../libnm-core/nm-setting-wimax.c:124
#: ../libnm-core/nm-setting-wireless-security.c:918
#: ../libnm-core/nm-setting-wireless.c:750 ../libnm-util/nm-setting.c:1355
#: ../libnm-util/nm-setting.c:1374 ../libnm-util/nm-setting.c:1392
#: ../libnm-util/nm-setting-8021x.c:2324 ../libnm-util/nm-setting-8021x.c:2341
#: ../libnm-util/nm-setting-8021x.c:2382 ../libnm-util/nm-setting-8021x.c:2399
#: ../libnm-util/nm-setting-8021x.c:2451 ../libnm-util/nm-setting-8021x.c:2463
#: ../libnm-util/nm-setting-8021x.c:2481 ../libnm-util/nm-setting-8021x.c:2493
#: ../libnm-util/nm-setting-8021x.c:2517 ../libnm-util/nm-setting-8021x.c:2677
#: ../libnm-util/nm-setting-adsl.c:209 ../libnm-util/nm-setting-bluetooth.c:141
#: ../libnm-util/nm-setting-bluetooth.c:159 ../libnm-util/nm-setting-cdma.c:161
#: ../libnm-util/nm-setting-connection.c:765
#: ../libnm-util/nm-setting-connection.c:781
#: ../libnm-util/nm-setting-connection.c:842
#: ../libnm-util/nm-setting-ip4-config.c:869
#: ../libnm-util/nm-setting-ip6-config.c:831
#: ../libnm-util/nm-setting-ip6-config.c:897
#: ../libnm-util/nm-setting-olpc-mesh.c:123
#: ../libnm-util/nm-setting-pppoe.c:162 ../libnm-util/nm-setting-vpn.c:422
#: ../libnm-util/nm-setting-wimax.c:149
#: ../libnm-util/nm-setting-wireless-security.c:890
#: ../libnm-util/nm-setting-wireless.c:768
msgid "property is missing"
msgstr ""

#: ../libnm-core/nm-connection.c:2379
msgid "IP Tunnel"
msgstr ""

#: ../libnm-core/nm-dbus-utils.c:202
#, c-format
msgid "Method returned type '%s', but expected '%s'"
msgstr ""

#: ../libnm-core/nm-keyfile-utils.c:210
#, c-format
msgid "value is not an integer in range [%lld, %lld]"
msgstr ""

#: ../libnm-core/nm-keyfile.c:210
msgid "ignoring missing number"
msgstr ""

#: ../libnm-core/nm-keyfile.c:218
#, c-format
msgid "ignoring invalid number '%s'"
msgstr ""

#: ../libnm-core/nm-keyfile.c:239
#, c-format
msgid "ignoring invalid %s address: %s"
msgstr ""

#: ../libnm-core/nm-keyfile.c:281
#, c-format
msgid "ignoring invalid gateway '%s' for %s route"
msgstr ""

#: ../libnm-core/nm-keyfile.c:302
#, c-format
msgid "ignoring invalid %s route: %s"
msgstr ""

#: ../libnm-core/nm-keyfile.c:427
#, c-format
msgid "unexpected character '%c' for address %s: '%s' (position %td)"
msgstr ""

#: ../libnm-core/nm-keyfile.c:437
#, c-format
msgid "unexpected character '%c' for %s: '%s' (position %td)"
msgstr ""

#: ../libnm-core/nm-keyfile.c:446
#, c-format
msgid "unexpected character '%c' in prefix length for %s: '%s' (position %td)"
msgstr ""

#: ../libnm-core/nm-keyfile.c:457
#, c-format
msgid "garbage at the end of value %s: '%s'"
msgstr ""

#: ../libnm-core/nm-keyfile.c:463
#, c-format
msgid "deprecated semicolon at the end of value %s: '%s'"
msgstr ""

#: ../libnm-core/nm-keyfile.c:478
#, c-format
msgid "invalid prefix length for %s '%s', defaulting to %d"
msgstr ""

#: ../libnm-core/nm-keyfile.c:485
#, c-format
msgid "missing prefix length for %s '%s', defaulting to %d"
msgstr ""

#: ../libnm-core/nm-keyfile.c:748
#, c-format
msgid "ignoring invalid DNS server IPv%c address '%s'"
msgstr ""

#: ../libnm-core/nm-keyfile.c:844 ../libnm-core/nm-keyfile.c:2734
#, c-format
msgid "ignoring invalid byte element '%d' (not between 0 and 255 inclusive)"
msgstr ""

#: ../libnm-core/nm-keyfile.c:855
msgid "ignoring invalid MAC address"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1105
msgid "ignoring invalid SSID"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1121
msgid "ignoring invalid raw password"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1258
msgid "invalid key/cert value"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1269
#, c-format
msgid "invalid key/cert value path \"%s\""
msgstr ""

#: ../libnm-core/nm-keyfile.c:1285 ../libnm-core/nm-keyfile.c:1368
#, c-format
msgid "certificate or key file '%s' does not exist"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1294
#, c-format
msgid "invalid PKCS#11 URI \"%s\""
msgstr ""

#: ../libnm-core/nm-keyfile.c:1338
msgid "invalid key/cert value data:;base64, is not base64"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1347
msgid "invalid key/cert value data:;base64,file://"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1380
msgid "invalid key/cert value is not a valid blob"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1482
#, c-format
msgid "invalid parity value '%s'"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1499 ../libnm-core/nm-keyfile.c:2789
#, c-format
msgid "invalid setting: %s"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1514
#, c-format
msgid "ignoring invalid team configuration: %s"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1557
#, c-format
msgid "invalid qdisc: %s"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1605
#, fuzzy, c-format
msgid "invalid tfilter: %s"
msgstr "Sertifikaadi andmete lähtestamine nurjus: %s"

#: ../libnm-core/nm-keyfile.c:2634
#, fuzzy, c-format
msgid "error loading setting value: %s"
msgstr "viga lingi puhvri uuendamisel: %s"

#: ../libnm-core/nm-keyfile.c:2661 ../libnm-core/nm-keyfile.c:2672
#: ../libnm-core/nm-keyfile.c:2690 ../libnm-core/nm-keyfile.c:2701
#: ../libnm-core/nm-keyfile.c:2712 ../libnm-core/nm-keyfile.c:2764
#: ../libnm-core/nm-keyfile.c:2775
msgid "value cannot be interpreted as integer"
msgstr ""

#: ../libnm-core/nm-keyfile.c:2810
#, c-format
msgid "invalid setting name '%s'"
msgstr ""

#: ../libnm-core/nm-keyfile.c:2855
#, c-format
msgid "invalid key '%s.%s'"
msgstr ""

#: ../libnm-core/nm-keyfile.c:2870
#, c-format
msgid "key '%s.%s' is not boolean"
msgstr ""

#: ../libnm-core/nm-setting-6lowpan.c:104
#, c-format
msgid "property is not specified"
msgstr ""

#: ../libnm-core/nm-setting-6lowpan.c:126 ../libnm-core/nm-setting-macsec.c:314
#: ../libnm-core/nm-setting-vlan.c:632 ../libnm-util/nm-setting-vlan.c:556
#, c-format
msgid "'%s' value doesn't match '%s=%s'"
msgstr ""

#: ../libnm-core/nm-setting-6lowpan.c:137
#: ../libnm-core/nm-setting-ip-tunnel.c:351
#: ../libnm-core/nm-setting-macsec.c:325 ../libnm-core/nm-setting-macvlan.c:161
#: ../libnm-core/nm-setting-vlan.c:643 ../libnm-core/nm-setting-vxlan.c:401
#: ../libnm-util/nm-setting-vlan.c:567
#, c-format
msgid "'%s' is neither an UUID nor an interface name"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:229
msgid "binary data missing"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:257
msgid "URI not NUL terminated"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:266
msgid "URI is empty"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:274
msgid "URI is not valid UTF-8"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:292
msgid "data missing"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:315 ../libnm-core/nm-setting-8021x.c:682
#, c-format
msgid "certificate is invalid: %s"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:323
#, c-format
msgid "certificate detected as invalid scheme"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:537 ../libnm-util/nm-setting-8021x.c:639
msgid "CA certificate must be in X.509 format"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:553 ../libnm-util/nm-setting-8021x.c:957
#: ../libnm-util/nm-setting-8021x.c:1220 ../libnm-util/nm-setting-8021x.c:1542
#, fuzzy
msgid "invalid certificate format"
msgstr "Sertifikaadi andmete lähtestamine nurjus: %s"

#: ../libnm-core/nm-setting-8021x.c:692
#, c-format
msgid "password is not supported when certificate is not on a PKCS#11 token"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:2578 ../libnm-core/nm-setting-8021x.c:2595
#: ../libnm-core/nm-setting-8021x.c:2626 ../libnm-core/nm-setting-8021x.c:2643
#: ../libnm-core/nm-setting-8021x.c:2684 ../libnm-core/nm-setting-8021x.c:2696
#: ../libnm-core/nm-setting-8021x.c:2714 ../libnm-core/nm-setting-8021x.c:2726
#: ../libnm-core/nm-setting-8021x.c:2751 ../libnm-core/nm-setting-adsl.c:194
#: ../libnm-core/nm-setting-cdma.c:164 ../libnm-core/nm-setting-cdma.c:173
#: ../libnm-core/nm-setting-connection.c:954
#: ../libnm-core/nm-setting-connection.c:1002
#: ../libnm-core/nm-setting-gsm.c:299 ../libnm-core/nm-setting-gsm.c:356
#: ../libnm-core/nm-setting-gsm.c:393 ../libnm-core/nm-setting-gsm.c:402
#: ../libnm-core/nm-setting-ip-config.c:2499
#: ../libnm-core/nm-setting-ip4-config.c:196
#: ../libnm-core/nm-setting-ip4-config.c:203
#: ../libnm-core/nm-setting-pppoe.c:166 ../libnm-core/nm-setting-pppoe.c:175
#: ../libnm-core/nm-setting-vpn.c:559 ../libnm-core/nm-setting-vpn.c:569
#: ../libnm-core/nm-setting-wimax.c:133
#: ../libnm-core/nm-setting-wireless-security.c:948
#: ../libnm-core/nm-setting-wireless-security.c:972
#: ../libnm-core/nm-setting.c:1237 ../libnm-util/nm-setting-8021x.c:2331
#: ../libnm-util/nm-setting-8021x.c:2348 ../libnm-util/nm-setting-8021x.c:2389
#: ../libnm-util/nm-setting-8021x.c:2406 ../libnm-util/nm-setting-8021x.c:2457
#: ../libnm-util/nm-setting-8021x.c:2469 ../libnm-util/nm-setting-8021x.c:2487
#: ../libnm-util/nm-setting-8021x.c:2499 ../libnm-util/nm-setting-8021x.c:2524
#: ../libnm-util/nm-setting-adsl.c:216 ../libnm-util/nm-setting-cdma.c:168
#: ../libnm-util/nm-setting-cdma.c:177
#: ../libnm-util/nm-setting-connection.c:772
#: ../libnm-util/nm-setting-connection.c:849 ../libnm-util/nm-setting-gsm.c:281
#: ../libnm-util/nm-setting-gsm.c:338 ../libnm-util/nm-setting-ip4-config.c:934
#: ../libnm-util/nm-setting-ip4-config.c:943
#: ../libnm-util/nm-setting-pppoe.c:169 ../libnm-util/nm-setting-pppoe.c:178
#: ../libnm-util/nm-setting-vpn.c:431 ../libnm-util/nm-setting-vpn.c:441
#: ../libnm-util/nm-setting-wimax.c:158
#: ../libnm-util/nm-setting-wireless-security.c:920
#: ../libnm-util/nm-setting-wireless-security.c:944
msgid "property is empty"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:2608 ../libnm-core/nm-setting-8021x.c:2656
#: ../libnm-util/nm-setting-8021x.c:2359 ../libnm-util/nm-setting-8021x.c:2371
#: ../libnm-util/nm-setting-8021x.c:2417 ../libnm-util/nm-setting-8021x.c:2429
#, c-format
msgid "has to match '%s' property for PKCS#12"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:2835
#: ../libnm-core/nm-setting-bluetooth.c:121
#: ../libnm-core/nm-setting-infiniband.c:190
#: ../libnm-core/nm-setting-infiniband.c:205
#: ../libnm-core/nm-setting-ip4-config.c:187
#: ../libnm-core/nm-setting-ip6-config.c:235
#: ../libnm-core/nm-setting-ip6-config.c:246
#: ../libnm-core/nm-setting-olpc-mesh.c:147
#: ../libnm-core/nm-setting-wimax.c:142 ../libnm-core/nm-setting-wired.c:676
#: ../libnm-core/nm-setting-wired.c:686
#: ../libnm-core/nm-setting-wireless-security.c:991
#: ../libnm-core/nm-setting-wireless-security.c:1000
#: ../libnm-core/nm-setting-wireless-security.c:1009
#: ../libnm-core/nm-setting-wireless-security.c:1045
#: ../libnm-core/nm-setting-wireless-security.c:1055
#: ../libnm-core/nm-setting-wireless-security.c:1078
#: ../libnm-core/nm-setting-wireless-security.c:1103
#: ../libnm-core/nm-setting-wireless-security.c:1130
#: ../libnm-core/nm-setting-wireless-security.c:1169
#: ../libnm-core/nm-setting-wireless.c:811
#: ../libnm-core/nm-setting-wireless.c:820
#: ../libnm-core/nm-setting-wireless.c:831 ../libnm-core/nm-setting-wpan.c:173
#: ../libnm-util/nm-setting.c:1365 ../libnm-util/nm-setting.c:1383
#: ../libnm-util/nm-setting.c:1402 ../libnm-util/nm-setting-8021x.c:2652
#: ../libnm-util/nm-setting-8021x.c:2686
#: ../libnm-util/nm-setting-bluetooth.c:150
#: ../libnm-util/nm-setting-infiniband.c:205
#: ../libnm-util/nm-setting-infiniband.c:221
#: ../libnm-util/nm-setting-ip4-config.c:925
#: ../libnm-util/nm-setting-ip6-config.c:888
#: ../libnm-util/nm-setting-olpc-mesh.c:151
#: ../libnm-util/nm-setting-wimax.c:167 ../libnm-util/nm-setting-wired.c:657
#: ../libnm-util/nm-setting-wired.c:666
#: ../libnm-util/nm-setting-wireless-security.c:963
#: ../libnm-util/nm-setting-wireless-security.c:972
#: ../libnm-util/nm-setting-wireless-security.c:981
#: ../libnm-util/nm-setting-wireless-security.c:1017
#: ../libnm-util/nm-setting-wireless-security.c:1027
#: ../libnm-util/nm-setting-wireless.c:828
#: ../libnm-util/nm-setting-wireless.c:837
#: ../libnm-util/nm-setting-wireless.c:846
msgid "property is invalid"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:2862 ../libnm-core/nm-setting-8021x.c:2874
#: ../libnm-core/nm-setting-8021x.c:2888 ../libnm-core/nm-setting-8021x.c:2915
#: ../libnm-core/nm-setting-8021x.c:2930 ../libnm-core/nm-setting-adsl.c:206
#: ../libnm-core/nm-setting-adsl.c:218 ../libnm-core/nm-setting-bluetooth.c:149
#: ../libnm-core/nm-setting-wireless-security.c:927
#: ../libnm-util/nm-setting-8021x.c:2711 ../libnm-util/nm-setting-8021x.c:2721
#: ../libnm-util/nm-setting-8021x.c:2731 ../libnm-util/nm-setting-8021x.c:2741
#: ../libnm-util/nm-setting-8021x.c:2751 ../libnm-util/nm-setting-adsl.c:228
#: ../libnm-util/nm-setting-adsl.c:240 ../libnm-util/nm-setting-bluetooth.c:167
#: ../libnm-util/nm-setting-wireless-security.c:899
#, c-format
msgid "'%s' is not a valid value for the property"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:2898
msgid "invalid auth flags"
msgstr ""

#: ../libnm-core/nm-setting-bluetooth.c:171
#, c-format
msgid "'%s' connection requires '%s' or '%s' setting"
msgstr ""

#: ../libnm-core/nm-setting-bluetooth.c:217
#, c-format
msgid "'%s' connection requires '%s' setting"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:564 ../libnm-util/nm-setting-bond.c:516
#, c-format
msgid "invalid option '%s' or its value '%s'"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:589 ../libnm-util/nm-setting-bond.c:535
#, c-format
msgid "only one of '%s' and '%s' can be set"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:602 ../libnm-util/nm-setting-bond.c:546
#, c-format
msgid "mandatory option '%s' is missing"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:612 ../libnm-util/nm-setting-bond.c:555
#, c-format
msgid "'%s' is not a valid value for '%s'"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:626 ../libnm-util/nm-setting-bond.c:568
#, c-format
msgid "'%s=%s' is incompatible with '%s > 0'"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:641
#, c-format
msgid "'%s' is not valid for the '%s' option: %s"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:652 ../libnm-util/nm-setting-bond.c:591
#, c-format
msgid "'%s' option is only valid for '%s=%s'"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:665 ../libnm-util/nm-setting-bond.c:604
#, c-format
msgid "'%s=%s' is not a valid configuration for '%s'"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:678 ../libnm-core/nm-setting-bond.c:687
#: ../libnm-core/nm-setting-bond.c:707 ../libnm-core/nm-setting-bond.c:743
#: ../libnm-util/nm-setting-bond.c:617 ../libnm-util/nm-setting-bond.c:626
#: ../libnm-util/nm-setting-bond.c:646 ../libnm-util/nm-setting-bond.c:682
#, c-format
msgid "'%s' option requires '%s' option to be set"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:718 ../libnm-util/nm-setting-bond.c:657
#, c-format
msgid "'%s' option is empty"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:730 ../libnm-util/nm-setting-bond.c:669
#, c-format
msgid "'%s' is not a valid IPv4 address for '%s' option"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:758 ../libnm-util/nm-setting-bond.c:696
#, c-format
msgid "'%s' option is only valid with mode '%s'"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:769
#, c-format
msgid "'%s' and '%s' cannot have different values"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:785
#, c-format
msgid "'%s' option should be string"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:801
#, c-format
msgid "'%s' option is not valid with mode '%s'"
msgstr ""

#: ../libnm-core/nm-setting-bridge-port.c:125
#: ../libnm-core/nm-setting-ovs-interface.c:259
#: ../libnm-core/nm-setting-ovs-port.c:187
#: ../libnm-core/nm-setting-ovs-bridge.c:150
#: ../libnm-core/nm-setting-team-port.c:357
#, c-format
msgid "missing setting"
msgstr ""

#: ../libnm-core/nm-setting-bridge-port.c:136
#: ../libnm-core/nm-setting-ovs-interface.c:280
#: ../libnm-core/nm-setting-ovs-port.c:208
#: ../libnm-core/nm-setting-team-port.c:368
#, c-format
msgid ""
"A connection with a '%s' setting must have the slave-type set to '%s'. "
"Instead it is '%s'"
msgstr ""

#: ../libnm-core/nm-setting-bridge.c:229 ../libnm-util/nm-setting-bridge.c:268
#, c-format
msgid "value '%d' is out of range <%d-%d>"
msgstr ""

#: ../libnm-core/nm-setting-bridge.c:246 ../libnm-core/nm-setting-wired.c:650
#: ../libnm-core/nm-setting-wired.c:712 ../libnm-core/nm-setting-wired.c:754
#: ../libnm-util/nm-setting-bridge.c:285 ../libnm-util/nm-setting-wired.c:632
#: ../libnm-util/nm-setting-wired.c:690
msgid "is not a valid MAC address"
msgstr ""

#: ../libnm-core/nm-setting-bridge.c:287
msgid "the mask can't contain bits 0 (STP), 1 (MAC) or 2 (LACP)"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:924
#, c-format
msgid "setting required for connection of type '%s'"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:963
#: ../libnm-util/nm-setting-connection.c:788
#, c-format
msgid "'%s' is not a valid UUID"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:1013
#, c-format
msgid "connection type '%s' is not valid"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:1049
#: ../libnm-util/nm-setting-connection.c:874
#, c-format
msgid "Unknown slave type '%s'"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:1060
#: ../libnm-util/nm-setting-connection.c:884
#, c-format
msgid "Slave connections need a valid '%s' property"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:1081
#: ../libnm-util/nm-setting-connection.c:894
#, c-format
msgid "Cannot set '%s' without '%s'"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:1095
#, c-format
msgid "'%s' connections must be enslaved to '%s', not '%s'"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:1109
#, c-format
msgid "metered value %d is not valid"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:1120
#: ../libnm-core/nm-setting-connection.c:1131
#: ../libnm-core/nm-setting-connection.c:1144
#, c-format
msgid "value %d is not valid"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:1165
#, c-format
msgid "property type should be set to '%s'"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:1180
#, c-format
msgid "slave-type '%s' requires a '%s' setting in the connection"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:1190
#, c-format
msgid ""
"Detect a slave connection with '%s' set and a port type '%s'. '%s' should be "
"set to '%s'"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:1207
#, c-format
msgid "A slave connection with '%s' set to '%s' cannot have a '%s' setting"
msgstr ""

#: ../libnm-core/nm-setting-dcb.c:520 ../libnm-util/nm-setting-dcb.c:593
msgid "flags invalid"
msgstr ""

#: ../libnm-core/nm-setting-dcb.c:529 ../libnm-util/nm-setting-dcb.c:602
msgid "flags invalid - disabled"
msgstr ""

#: ../libnm-core/nm-setting-dcb.c:555 ../libnm-core/nm-setting-dcb.c:604
#: ../libnm-util/nm-setting-dcb.c:628 ../libnm-util/nm-setting-dcb.c:677
msgid "property invalid (not enabled)"
msgstr ""

#: ../libnm-core/nm-setting-dcb.c:564 ../libnm-util/nm-setting-dcb.c:637
msgid "element invalid"
msgstr ""

#: ../libnm-core/nm-setting-dcb.c:579 ../libnm-util/nm-setting-dcb.c:652
msgid "sum not 100%"
msgstr ""

#: ../libnm-core/nm-setting-dcb.c:613 ../libnm-core/nm-setting-dcb.c:645
#: ../libnm-util/nm-setting-dcb.c:686 ../libnm-util/nm-setting-dcb.c:718
msgid "property invalid"
msgstr ""

#: ../libnm-core/nm-setting-dcb.c:635 ../libnm-util/nm-setting-dcb.c:708
msgid "property missing"
msgstr ""

#: ../libnm-core/nm-setting-ethtool.c:269
msgid "unsupported offload feature"
msgstr ""

#: ../libnm-core/nm-setting-ethtool.c:277
msgid "offload feature has invalid variant type"
msgstr ""

#: ../libnm-core/nm-setting-ethtool.c:300
#, c-format
msgid "unknown ethtool option '%s'"
msgstr ""

#: ../libnm-core/nm-setting-gsm.c:312 ../libnm-util/nm-setting-gsm.c:294
#, c-format
msgid "property value '%s' is empty or too long (>64)"
msgstr ""

#: ../libnm-core/nm-setting-gsm.c:344 ../libnm-util/nm-setting-gsm.c:326
#, c-format
msgid "'%s' contains invalid char(s) (use [A-Za-z._-])"
msgstr ""

#: ../libnm-core/nm-setting-gsm.c:370 ../libnm-util/nm-setting-gsm.c:352
#, c-format
msgid "'%s' length is invalid (should be 5 or 6 digits)"
msgstr ""

#: ../libnm-core/nm-setting-gsm.c:381 ../libnm-util/nm-setting-gsm.c:363
#, c-format
msgid "'%s' is not a number"
msgstr ""

#: ../libnm-core/nm-setting-gsm.c:415
msgid "property is empty or wrong size"
msgstr ""

#: ../libnm-core/nm-setting-gsm.c:425
msgid "property must contain only digits"
msgstr ""

#: ../libnm-core/nm-setting-infiniband.c:226
#: ../libnm-util/nm-setting-infiniband.c:239
msgid "Must specify a P_Key if specifying parent"
msgstr ""

#: ../libnm-core/nm-setting-infiniband.c:236
#: ../libnm-util/nm-setting-infiniband.c:249
msgid "InfiniBand P_Key connection did not specify parent interface name"
msgstr ""

#: ../libnm-core/nm-setting-infiniband.c:274
#: ../libnm-util/nm-setting-infiniband.c:285
#, c-format
msgid ""
"interface name of software infiniband device must be '%s' or unset (instead "
"it is '%s')"
msgstr ""

#: ../libnm-core/nm-setting-infiniband.c:289
#, c-format
msgid "mtu for transport mode '%s' can be at most %d but it is %d"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:133
#, c-format
msgid "Missing IPv4 address"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:133
#, c-format
msgid "Missing IPv6 address"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:138
#, c-format
msgid "Invalid IPv4 address '%s'"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:138
#, c-format
msgid "Invalid IPv6 address '%s'"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:153
#, c-format
msgid "Invalid IPv4 address prefix '%u'"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:153
#, c-format
msgid "Invalid IPv6 address prefix '%u'"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:168
#, c-format
msgid "Invalid routing metric '%s'"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:1287
#: ../libnm-core/nm-setting-sriov.c:421
msgid "unknown attribute"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:1297
#: ../libnm-core/nm-setting-sriov.c:431
#, c-format
msgid "invalid attribute type '%s'"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:1308
#, c-format
msgid "attribute is not valid for a IPv4 route"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:1309
#, c-format
msgid "attribute is not valid for a IPv6 route"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:1325
#: ../libnm-core/nm-setting-ip-config.c:1349
#, c-format
msgid "'%s' is not a valid IPv4 address"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:1326
#: ../libnm-core/nm-setting-ip-config.c:1350
#, c-format
msgid "'%s' is not a valid IPv6 address"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:1340
#, c-format
msgid "invalid prefix %s"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2512
#, c-format
msgid "%d. DNS server address is invalid"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2528
#, c-format
msgid "%d. IP address is invalid"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2540
#, c-format
msgid "%d. IP address has 'label' property with invalid type"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2549
#, c-format
msgid "%d. IP address has invalid label '%s'"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2563
msgid "gateway cannot be set if there are no addresses configured"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2572
msgid "gateway is invalid"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2586
#, c-format
msgid "%d. route is invalid"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2595
#, c-format
msgid "%d. route cannot be a default route"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2606
#, c-format
msgid "a gateway is incompatible with '%s'"
msgstr ""

#: ../libnm-core/nm-setting-ip4-config.c:141
#: ../libnm-core/nm-setting-ip6-config.c:187
#: ../libnm-util/nm-setting-ip4-config.c:879
#: ../libnm-util/nm-setting-ip6-config.c:841
#, c-format
msgid "this property cannot be empty for '%s=%s'"
msgstr ""

#: ../libnm-core/nm-setting-ip4-config.c:153
#: ../libnm-core/nm-setting-ip4-config.c:163
#: ../libnm-core/nm-setting-ip4-config.c:175
#: ../libnm-core/nm-setting-ip6-config.c:202
#: ../libnm-core/nm-setting-ip6-config.c:212
#: ../libnm-core/nm-setting-ip6-config.c:222
#: ../libnm-util/nm-setting-ip4-config.c:891
#: ../libnm-util/nm-setting-ip4-config.c:901
#: ../libnm-util/nm-setting-ip4-config.c:913
#: ../libnm-util/nm-setting-ip6-config.c:853
#: ../libnm-util/nm-setting-ip6-config.c:863
#: ../libnm-util/nm-setting-ip6-config.c:875
#, c-format
msgid "this property is not allowed for '%s=%s'"
msgstr ""

#: ../libnm-core/nm-setting-ip4-config.c:212
#, c-format
msgid "'%s' is not a valid FQDN"
msgstr ""

#: ../libnm-core/nm-setting-ip4-config.c:221
msgid "property cannot be set when dhcp-hostname is also set"
msgstr ""

#: ../libnm-core/nm-setting-ip4-config.c:233
#, c-format
msgid "multiple addresses are not allowed for '%s=%s'"
msgstr ""

#: ../libnm-core/nm-setting-ip4-config.c:247
msgid "property should be TRUE when method is set to disabled"
msgstr ""

#: ../libnm-core/nm-setting-ip6-config.c:261
msgid "value is not a valid token"
msgstr ""

#: ../libnm-core/nm-setting-ip6-config.c:272
msgid "only makes sense with EUI64 address generation mode"
msgstr ""

#: ../libnm-core/nm-setting-ip6-config.c:283
msgid "invalid DUID"
msgstr ""

#: ../libnm-core/nm-setting-ip6-config.c:295
msgid "token is not in canonical form"
msgstr ""

#: ../libnm-core/nm-setting-ip6-config.c:307
msgid "property should be TRUE when method is set to ignore"
msgstr ""

#: ../libnm-core/nm-setting-ip-tunnel.c:339
#, c-format
msgid "'%d' is not a valid tunnel mode"
msgstr ""

#: ../libnm-core/nm-setting-ip-tunnel.c:362
#: ../libnm-core/nm-setting-ip-tunnel.c:382
#, c-format
msgid "'%s' is not a valid IPv%c address"
msgstr ""

#: ../libnm-core/nm-setting-ip-tunnel.c:399
msgid "tunnel keys can only be specified for GRE tunnels"
msgstr ""

#: ../libnm-core/nm-setting-ip-tunnel.c:412
#: ../libnm-core/nm-setting-ip-tunnel.c:428
#, c-format
msgid "'%s' is not a valid tunnel key"
msgstr ""

#: ../libnm-core/nm-setting-ip-tunnel.c:440
msgid "a fixed TTL is allowed only when path MTU discovery is enabled"
msgstr ""

#: ../libnm-core/nm-setting-ip-tunnel.c:453
#, c-format
msgid "some flags are invalid for the select mode: %s"
msgstr ""

#: ../libnm-core/nm-setting-ip-tunnel.c:467
#, c-format
msgid "wired setting not allowed for mode %s"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:258
msgid "the key is empty"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:269
#, c-format
msgid "the key must be %d characters"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:277
#, fuzzy
msgid "the key contains non-hexadecimal characters"
msgstr "IV sisaldab mitte-oktaalarvu."

#: ../libnm-core/nm-setting-macsec.c:339 ../libnm-core/nm-setting-macvlan.c:175
#: ../libnm-core/nm-setting-vlan.c:657 ../libnm-util/nm-setting-vlan.c:580
#, c-format
msgid "property is not specified and neither is '%s:%s'"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:360
#, c-format
msgid "EAP key management requires '%s' setting presence"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:369
msgid "must be either psk (0) or eap (1)"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:378
#, c-format
msgid "invalid port %d"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:389
msgid "only valid for psk mode"
msgstr ""

#: ../libnm-core/nm-setting-macvlan.c:186
msgid "non promiscuous operation is allowed only in passthru mode"
msgstr ""

#: ../libnm-core/nm-setting-olpc-mesh.c:128
#: ../libnm-core/nm-setting-wireless.c:760
#: ../libnm-util/nm-setting-olpc-mesh.c:132
#: ../libnm-util/nm-setting-wireless.c:777
msgid "SSID length is out of range <1-32> bytes"
msgstr ""

#: ../libnm-core/nm-setting-olpc-mesh.c:137
#: ../libnm-core/nm-setting-wireless.c:800
#: ../libnm-util/nm-setting-olpc-mesh.c:141
#: ../libnm-util/nm-setting-wireless.c:817
#, c-format
msgid "'%d' is not a valid channel"
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:111
#, c-format
msgid "'%s' is not a valid interface type"
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:133
#, c-format
msgid "A connection with a '%s' setting needs connection.type explicitly set"
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:145
#, c-format
msgid "A connection of type '%s' cannot have ovs-interface.type \"system\""
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:157
#, c-format
msgid "A connection of type '%s' cannot have an ovs-interface.type \"%s\""
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:173
#, c-format
msgid ""
"A connection with '%s' setting must be of connection.type \"ovs-interface\" "
"but is \"%s\""
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:184
#, c-format
msgid ""
"A connection with '%s' setting needs to be of 'patch' interface type, not "
"'%s'"
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:199
#, c-format
msgid "A connection with ovs-interface.type '%s' setting a 'ovs-patch' setting"
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:219
#, c-format
msgid "Missing ovs interface setting"
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:225
#, c-format
msgid "Missing ovs interface type"
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:268
#: ../libnm-core/nm-setting-ovs-port.c:196
#, c-format
msgid "A connection with a '%s' setting must have a master."
msgstr ""

#: ../libnm-core/nm-setting-ovs-patch.c:104
#: ../libnm-core/nm-setting-vxlan.c:373
#, c-format
msgid "'%s' is not a valid IP address"
msgstr ""

#: ../libnm-core/nm-setting-ovs-port.c:221
#, c-format
msgid "'%s' is not allowed in vlan_mode"
msgstr ""

#: ../libnm-core/nm-setting-ovs-port.c:231
#, c-format
msgid "the tag id must be in range 0-4094 but is %u"
msgstr ""

#: ../libnm-core/nm-setting-ovs-port.c:241
#, c-format
msgid "'%s' is not allowed in lacp"
msgstr ""

#: ../libnm-core/nm-setting-ovs-port.c:251
#, c-format
msgid "'%s' is not allowed in bond_mode"
msgstr ""

#: ../libnm-core/nm-setting-ovs-bridge.c:159
#, c-format
msgid "A connection with a '%s' setting must not have a master."
msgstr ""

#: ../libnm-core/nm-setting-ovs-bridge.c:170
#, c-format
msgid "'%s' is not allowed in fail_mode"
msgstr ""

#: ../libnm-core/nm-setting-ppp.c:363 ../libnm-util/nm-setting-ppp.c:386
#, c-format
msgid "'%d' is out of valid range <128-16384>"
msgstr ""

#: ../libnm-core/nm-setting-ppp.c:376 ../libnm-util/nm-setting-ppp.c:399
#, c-format
msgid "setting this property requires non-zero '%s' property"
msgstr ""

#: ../libnm-core/nm-setting-proxy.c:161
#, c-format
msgid "invalid proxy method"
msgstr ""

#: ../libnm-core/nm-setting-proxy.c:171 ../libnm-core/nm-setting-proxy.c:180
#, c-format
msgid "this property is not allowed for method none"
msgstr ""

#: ../libnm-core/nm-setting-proxy.c:191
#, c-format
msgid "the script is too large"
msgstr ""

#: ../libnm-core/nm-setting-proxy.c:199
#, c-format
msgid "the script is not valid utf8"
msgstr ""

#: ../libnm-core/nm-setting-proxy.c:207
#, c-format
msgid "the script lacks FindProxyForURL function"
msgstr ""

#: ../libnm-core/nm-setting-sriov.c:1086
#, c-format
msgid "VF with index %u, but the total number of VFs is %u"
msgstr ""

#: ../libnm-core/nm-setting-sriov.c:1097
#, c-format
msgid "invalid VF %u: %s"
msgstr ""

#: ../libnm-core/nm-setting-sriov.c:1109
#, c-format
msgid "duplicate VF index %u"
msgstr ""

#: ../libnm-core/nm-setting-sriov.c:1130
#, c-format
msgid "VFs %d and %d are not sorted by ascending index"
msgstr ""

#: ../libnm-core/nm-setting-tc-config.c:68
#: ../libnm-core/nm-setting-tc-config.c:296
#: ../libnm-core/nm-setting-tc-config.c:550
#, c-format
msgid "'%s' is not a valid kind"
msgstr ""

#: ../libnm-core/nm-setting-tc-config.c:76
#: ../libnm-core/nm-setting-tc-config.c:558
msgid "parent handle missing"
msgstr ""

#: ../libnm-core/nm-setting-tc-config.c:1203
msgid "there are duplicate TC qdiscs"
msgstr ""

#: ../libnm-core/nm-setting-tc-config.c:1223
msgid "there are duplicate TC filters"
msgstr ""

#: ../libnm-core/nm-setting-team.c:135 ../libnm-core/nm-setting-team.c:194
#: ../libnm-core/nm-setting-team.c:306
#, c-format
msgid "%s is out of range [0, %d]"
msgstr ""

#: ../libnm-core/nm-setting-team.c:176
#, c-format
msgid "Missing target-host in nsna_ping link watcher"
msgstr ""

#: ../libnm-core/nm-setting-team.c:182 ../libnm-core/nm-setting-team.c:288
#, fuzzy, c-format
msgid "target-host '%s' contains invalid characters"
msgstr "IV sisaldab mitte-oktaalarvu."

#: ../libnm-core/nm-setting-team.c:281
#, c-format
msgid "Missing %s in arp_ping link watcher"
msgstr ""

#: ../libnm-core/nm-setting-team.c:294
#, fuzzy, c-format
msgid "source-host '%s' contains invalid characters"
msgstr "IV sisaldab mitte-oktaalarvu."

#: ../libnm-core/nm-setting-team.c:312
msgid "vlanid is out of range [-1, 4094]"
msgstr ""

#: ../libnm-core/nm-setting-team.c:1220
#: ../libnm-core/nm-setting-team-port.c:380
#, c-format
msgid "team config exceeds size limit"
msgstr ""

#: ../libnm-core/nm-setting-team.c:1246
#, c-format
msgid "invalid runner \"%s\""
msgstr ""

#: ../libnm-core/nm-setting-team.c:1259
#, c-format
msgid "missing link watcher name"
msgstr ""

#: ../libnm-core/nm-setting-team.c:1269
#, c-format
msgid "unknown link watcher \"%s\""
msgstr ""

#: ../libnm-core/nm-setting-team.c:1280
#, c-format
msgid "missing target host"
msgstr ""

#: ../libnm-core/nm-setting-team.c:1288
#, c-format
msgid "missing source address"
msgstr ""

#: ../libnm-core/nm-setting-tun.c:185
#, c-format
msgid "'%u': invalid mode"
msgstr ""

#: ../libnm-core/nm-setting-tun.c:195
#, c-format
msgid "'%s': invalid user ID"
msgstr ""

#: ../libnm-core/nm-setting-tun.c:206
#, c-format
msgid "'%s': invalid group ID"
msgstr ""

#: ../libnm-core/nm-setting-user.c:109
msgid "missing key"
msgstr ""

#: ../libnm-core/nm-setting-user.c:115
msgid "key is too long"
msgstr ""

#: ../libnm-core/nm-setting-user.c:120
msgid "key must be UTF8"
msgstr ""

#: ../libnm-core/nm-setting-user.c:143
msgid "key requires a '.' for a namespace"
msgstr ""

#: ../libnm-core/nm-setting-user.c:156
msgid "key cannot contain \"..\""
msgstr ""

#: ../libnm-core/nm-setting-user.c:161
#, fuzzy
msgid "key contains invalid characters"
msgstr "IV sisaldab mitte-oktaalarvu."

#: ../libnm-core/nm-setting-user.c:186
msgid "value is missing"
msgstr ""

#: ../libnm-core/nm-setting-user.c:193
msgid "value is too large"
msgstr ""

#: ../libnm-core/nm-setting-user.c:199
msgid "value is not valid UTF8"
msgstr ""

#: ../libnm-core/nm-setting-user.c:329
msgid "maximum number of user data entries reached"
msgstr ""

#: ../libnm-core/nm-setting-user.c:370
#, c-format
msgid "invalid key \"%s\": %s"
msgstr ""

#: ../libnm-core/nm-setting-user.c:374
#, c-format
msgid "invalid value for \"%s\": %s"
msgstr ""

#: ../libnm-core/nm-setting-user.c:389
#, c-format
msgid "maximum number of user data entries reached (%u instead of %u)"
msgstr ""

#: ../libnm-core/nm-setting-vlan.c:668 ../libnm-util/nm-setting-vlan.c:600
#, c-format
msgid "the vlan id must be in range 0-4094 but is %u"
msgstr ""

#: ../libnm-core/nm-setting-vlan.c:678 ../libnm-util/nm-setting-vlan.c:591
msgid "flags are invalid"
msgstr ""

#: ../libnm-core/nm-setting-vlan.c:690
msgid "vlan setting should have a ethernet setting as well"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:580
msgid "cannot set connection.multi-connect for VPN setting"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:601
#, c-format
msgid "secret was empty"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:631
msgid "setting contained a secret with an empty name"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:639
#, c-format
msgid "secret value was empty"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:686 ../libnm-core/nm-setting.c:2024
msgid "not a secret property"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:692
msgid "secret is not of correct type"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:725
msgid "secret flags property not found"
msgstr ""

#: ../libnm-core/nm-setting-vxlan.c:386
#, c-format
msgid "'%s' is not a valid IP%c address"
msgstr ""

#: ../libnm-core/nm-setting-vxlan.c:413
#, c-format
msgid "%d is greater than local port max %d"
msgstr ""

#: ../libnm-core/nm-setting-wired.c:630 ../libnm-util/nm-setting-wired.c:612
#, c-format
msgid "'%s' is not a valid Ethernet port value"
msgstr ""

#: ../libnm-core/nm-setting-wired.c:640 ../libnm-util/nm-setting-wired.c:622
#, c-format
msgid "'%s' is not a valid duplex value"
msgstr ""

#: ../libnm-core/nm-setting-wired.c:699 ../libnm-util/nm-setting-wired.c:679
#, c-format
msgid "invalid '%s' or its value '%s'"
msgstr ""

#: ../libnm-core/nm-setting-wired.c:736
msgid "Wake-on-LAN mode 'default' and 'ignore' are exclusive flags"
msgstr ""

#: ../libnm-core/nm-setting-wired.c:745
msgid "Wake-on-LAN password can only be used with magic packet mode"
msgstr ""

#: ../libnm-core/nm-setting-wired.c:770
msgid "both speed and duplex should have a valid value or both should be unset"
msgstr ""

#: ../libnm-core/nm-setting-wired.c:771
msgid "both speed and duplex are required for static link configuration"
msgstr ""

#: ../libnm-core/nm-setting-wireless-security.c:939
#: ../libnm-util/nm-setting-wireless-security.c:911
#, c-format
msgid "'%s' security requires '%s=%s'"
msgstr ""

#: ../libnm-core/nm-setting-wireless-security.c:960
#: ../libnm-util/nm-setting-wireless-security.c:932
#, c-format
msgid "'%s' security requires '%s' setting presence"
msgstr ""

#: ../libnm-core/nm-setting-wireless-security.c:981
#: ../libnm-util/nm-setting-wireless-security.c:953
#, c-format
msgid "'%d' value is out of range <0-3>"
msgstr ""

#: ../libnm-core/nm-setting-wireless-security.c:1036
#: ../libnm-util/nm-setting-wireless-security.c:1008
#, c-format
msgid "'%s' connections require '%s' in this property"
msgstr ""

#: ../libnm-core/nm-setting-wireless-security.c:1066
#: ../libnm-util/nm-setting-wireless-security.c:1038
#, c-format
msgid "'%s' can only be used with '%s=%s' (WEP)"
msgstr ""

#: ../libnm-core/nm-setting-wireless-security.c:1090
#, c-format
msgid "'%s' can only be used with '%s=%s' or '%s=%s'"
msgstr ""

#: ../libnm-core/nm-setting-wireless-security.c:1112
msgid "can't be simultaneously disabled and enabled"
msgstr ""

#: ../libnm-core/nm-setting-wireless.c:769
#: ../libnm-util/nm-setting-wireless.c:786
#, c-format
msgid "'%s' is not a valid Wi-Fi mode"
msgstr ""

#: ../libnm-core/nm-setting-wireless.c:779
#: ../libnm-util/nm-setting-wireless.c:796
#, c-format
msgid "'%s' is not a valid band"
msgstr ""

#: ../libnm-core/nm-setting-wireless.c:789
#, c-format
msgid "'%s' requires setting '%s' property"
msgstr ""

#: ../libnm-core/nm-setting-wireless.c:883
#, c-format
msgid "invalid value"
msgstr ""

#: ../libnm-core/nm-setting-wireless.c:893
msgid "Wake-on-WLAN mode 'default' and 'ignore' are exclusive flags"
msgstr ""

#: ../libnm-core/nm-setting-wireless.c:902
msgid "Wake-on-WLAN trying to set unknown flag"
msgstr ""

#: ../libnm-core/nm-setting-wireless.c:924
#, c-format
msgid "conflicting value of mac-address-randomization and cloned-mac-address"
msgstr ""

#: ../libnm-core/nm-setting-wpan.c:182
msgid "page must be defined along with a channel"
msgstr ""

#: ../libnm-core/nm-setting-wpan.c:191
#, c-format
msgid "page must be between %d and %d"
msgstr ""

#: ../libnm-core/nm-setting-wpan.c:202
#, c-format
msgid "channel must not be between %d and %d"
msgstr ""

#: ../libnm-core/nm-setting.c:852
#, c-format
msgid "duplicate property"
msgstr ""

#: ../libnm-core/nm-setting.c:900 ../libnm-core/nm-setting.c:947
#, c-format
msgid "can't set property of type '%s' from value of type '%s'"
msgstr ""

#: ../libnm-core/nm-setting.c:919 ../libnm-core/nm-setting.c:933
#, fuzzy, c-format
msgid "failed to set property: %s"
msgstr "Privaatvõtme dešifreerimine nurjus: %d."

#: ../libnm-core/nm-setting.c:961
#, c-format
msgid "can not set property: %s"
msgstr ""

#: ../libnm-core/nm-setting.c:977
#, c-format
msgid "unknown property"
msgstr ""

#: ../libnm-core/nm-setting.c:1935
msgid "secret not found"
msgstr ""

#: ../libnm-core/nm-utils.c:2045
#, c-format
msgid "'%s' is not a valid handle."
msgstr ""

#: ../libnm-core/nm-utils.c:2141
#, c-format
msgid "'%s' unexpected: parent already specified."
msgstr ""

#: ../libnm-core/nm-utils.c:2157
#, c-format
msgid "invalid handle: '%s'"
msgstr ""

#: ../libnm-core/nm-utils.c:2179
msgid "parent not specified."
msgstr ""

#: ../libnm-core/nm-utils.c:2226
#, c-format
msgid "unsupported qdisc option: '%s'."
msgstr ""

#: ../libnm-core/nm-utils.c:2342
msgid "action name missing."
msgstr ""

#: ../libnm-core/nm-utils.c:2366
#, c-format
msgid "unsupported action option: '%s'."
msgstr ""

#: ../libnm-core/nm-utils.c:2504
msgid "invalid action: "
msgstr ""

#: ../libnm-core/nm-utils.c:2508
#, c-format
msgid "unsupported tfilter option: '%s'."
msgstr ""

#: ../libnm-core/nm-utils.c:3110
#, c-format
msgid "failed stat file %s: %s"
msgstr ""

#: ../libnm-core/nm-utils.c:3119
#, c-format
msgid "not a file (%s)"
msgstr ""

#: ../libnm-core/nm-utils.c:3130
#, c-format
msgid "invalid file owner %d for %s"
msgstr ""

#: ../libnm-core/nm-utils.c:3141
#, c-format
msgid "file permissions for %s"
msgstr ""

#: ../libnm-core/nm-utils.c:3151
#, c-format
msgid "reject %s"
msgstr ""

#: ../libnm-core/nm-utils.c:3170
#, c-format
msgid "path is not absolute (%s)"
msgstr ""

#: ../libnm-core/nm-utils.c:3184
#, c-format
msgid "Plugin file does not exist (%s)"
msgstr ""

#: ../libnm-core/nm-utils.c:3192
#, c-format
msgid "Plugin is not a valid file (%s)"
msgstr ""

#: ../libnm-core/nm-utils.c:3202
#, c-format
msgid "libtool archives are not supported (%s)"
msgstr ""

#: ../libnm-core/nm-utils.c:3284 ../libnm-util/nm-utils.c:1794
#, c-format
msgid "Could not find \"%s\" binary"
msgstr ""

#: ../libnm-core/nm-utils.c:4369
#, c-format
msgid "not a valid ethernet MAC address for mask at position %lld"
msgstr ""

#: ../libnm-core/nm-utils.c:4384
#, c-format
msgid "not a valid ethernet MAC address #%u at position %lld"
msgstr ""

#: ../libnm-core/nm-utils.c:4420
msgid "interface name is too short"
msgstr ""

#: ../libnm-core/nm-utils.c:4429
msgid "interface name is reserved"
msgstr ""

#: ../libnm-core/nm-utils.c:4441
msgid "interface name contains an invalid character"
msgstr ""

#: ../libnm-core/nm-utils.c:4447
msgid "interface name is longer than 15 characters"
msgstr ""

#: ../libnm-core/nm-utils.c:5107
msgid "not valid utf-8"
msgstr ""

#: ../libnm-core/nm-utils.c:5128 ../libnm-core/nm-utils.c:5601
msgid "is not a JSON object"
msgstr ""

#: ../libnm-core/nm-utils.c:5577 ../libnm-core/nm-utils.c:5917
msgid "value is NULL"
msgstr ""

#: ../libnm-core/nm-utils.c:5577 ../libnm-core/nm-utils.c:5917
msgid "value is empty"
msgstr ""

#: ../libnm-core/nm-utils.c:5589
#, c-format
msgid "invalid JSON at position %d (%s)"
msgstr ""

#: ../libnm-core/nm-utils.c:6244 ../libnm-core/nm-utils.c:6264
msgid "unterminated escape sequence"
msgstr ""

#: ../libnm-core/nm-utils.c:6289
#, c-format
msgid "unknown attribute '%s'"
msgstr ""

#: ../libnm-core/nm-utils.c:6304
#, c-format
msgid "missing key-value separator '%c' after '%s'"
msgstr ""

#: ../libnm-core/nm-utils.c:6320
#, c-format
msgid "invalid uint32 value '%s' for attribute '%s'"
msgstr ""

#: ../libnm-core/nm-utils.c:6329
#, c-format
msgid "invalid uint8 value '%s' for attribute '%s'"
msgstr ""

#: ../libnm-core/nm-utils.c:6339
#, c-format
msgid "invalid boolean value '%s' for attribute '%s'"
msgstr ""

#: ../libnm-core/nm-utils.c:6349
#, c-format
msgid "unsupported attribute '%s' of type '%s'"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:296
#, c-format
msgid "cannot load plugin \"%s\": %s"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:307
#, c-format
msgid "failed to load nm_vpn_editor_plugin_factory() from %s (%s)"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:332
#, c-format
msgid "unknown error initializing plugin %s"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:349
#, c-format
msgid "cannot load VPN plugin in '%s': missing plugin name"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:358
#, c-format
msgid "cannot load VPN plugin in '%s': invalid service name"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:501
#, c-format
msgid "the plugin does not support import capability"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:521
#, c-format
msgid "the plugin does not support export capability"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:110
#, c-format
msgid "missing filename"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:118
#, c-format
msgid "filename must be an absolute path (%s)"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:127
#, c-format
msgid "filename has invalid format (%s)"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:450
#, c-format
msgid "there exists a conflicting plugin (%s) that has the same %s.%s value"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:488
#, c-format
msgid "there exists a conflicting plugin with the same name (%s)"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:1070
#, c-format
msgid "missing \"plugin\" setting"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:1080
#, c-format
msgid "%s: don't retry loading plugin which already failed previously"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:1174
msgid "missing filename to load VPN plugin info"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:1186
msgid "missing name for VPN plugin info"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:1195
msgid "missing service for VPN plugin info"
msgstr ""

#: ../libnm-glib/nm-device.c:1824 ../libnm/nm-device.c:1384
msgid "Bluetooth"
msgstr ""

#: ../libnm-glib/nm-device.c:1826 ../libnm/nm-device.c:1386
msgid "OLPC Mesh"
msgstr ""

#: ../libnm-glib/nm-device.c:1828 ../libnm/nm-device.c:1394
msgid "WiMAX"
msgstr ""

#: ../libnm-glib/nm-device.c:1842 ../libnm/nm-device.c:1408
msgid "ADSL"
msgstr ""

#: ../libnm-glib/nm-device.c:1844 ../libnm/nm-device.c:1410
msgid "MACVLAN"
msgstr ""

#: ../libnm-glib/nm-device.c:1846 ../libnm/nm-device.c:1412
msgid "VXLAN"
msgstr ""

#: ../libnm-glib/nm-device.c:1848 ../libnm/nm-device.c:1414
msgid "IPTunnel"
msgstr ""

#: ../libnm-glib/nm-device.c:1850 ../libnm/nm-device.c:1416
msgid "Tun"
msgstr ""

#: ../libnm-glib/nm-device.c:1852 ../libnm/nm-device.c:1418
msgid "Veth"
msgstr ""

#: ../libnm-glib/nm-device.c:1884 ../libnm/nm-device.c:1462
msgid "Wired"
msgstr ""

#: ../libnm-glib/nm-device.c:1915 ../libnm/nm-device.c:1493
msgid "PCI"
msgstr ""

#: ../libnm-glib/nm-device.c:1917 ../libnm/nm-device.c:1495
msgid "USB"
msgstr ""

#. TRANSLATORS: the first %s is a bus name (eg, "USB") or
#. * product name, the second is a device type (eg,
#. * "Ethernet"). You can change this to something like
#. * "%2$s (%1$s)" if there's no grammatical way to combine
#. * the strings otherwise.
#.
#: ../libnm-glib/nm-device.c:2014 ../libnm-glib/nm-device.c:2033
#: ../libnm/nm-device.c:1808 ../libnm/nm-device.c:1827
#, c-format
msgctxt "long device name"
msgid "%s %s"
msgstr ""

#: ../libnm-glib/nm-remote-connection.c:148
msgid "Disconnected by D-Bus"
msgstr ""

#: ../libnm-util/crypto.c:143
#, c-format
msgid "Doesn't look like a PEM private key file."
msgstr "Ei paista nagu PEM-eravõtme fail."

#: ../libnm-util/crypto.c:405 ../libnm-util/crypto_gnutls.c:151
#: ../libnm-util/crypto_gnutls.c:253 ../libnm-util/crypto_nss.c:162
#: ../libnm-util/crypto_nss.c:323
#, c-format
msgid "Private key cipher '%s' was unknown."
msgstr "Privaatvõtme šiffer '%s' oli tundmatu."

#: ../libnm-util/crypto_gnutls.c:84
#, c-format
msgid "Hash length too long (%d > %d)."
msgstr ""

#: ../libnm-util/crypto_gnutls.c:115
#, fuzzy, c-format
msgid "Failed to initialize the MD5 engine: %s (%s)"
msgstr "MD5-mootori lähtestamine nurjus: %s / %s."

#: ../libnm-util/crypto_gnutls.c:159
#, c-format
msgid "Invalid IV length (must be at least %zd)."
msgstr ""

#: ../libnm-util/crypto_nss.c:99
#, c-format
msgid "Failed to initialize the MD5 context: %d."
msgstr "MD5 konteksti lähtestamine nurjus: %d."

#: ../libnm-util/crypto_nss.c:170
#, c-format
msgid "Invalid IV length (must be at least %d)."
msgstr ""

#: ../libnm-util/crypto_nss.c:457
#, c-format
msgid "Couldn't convert password to UCS2: %d"
msgstr ""

#: ../libnm-util/nm-setting-8021x.c:1811
msgid "invalid private key"
msgstr ""

#: ../libnm-util/nm-setting-8021x.c:2122
msgid "invalid phase2 private key"
msgstr ""

#: ../libnm-util/nm-setting-bluetooth.c:185
#, c-format
msgid "requires '%s' or '%s' setting"
msgstr ""

#: ../libnm-util/nm-setting-bond.c:581
#, c-format
msgid "'%s' is not a valid interface name for '%s' option"
msgstr ""

#: ../libnm-util/nm-setting-connection.c:831
#: ../libnm-util/nm-setting-infiniband.c:269
#, c-format
msgid "'%s' is not a valid interface name"
msgstr ""

#: ../libnm-util/nm-setting-connection.c:859
#, c-format
msgid "requires presence of '%s' setting in the connection"
msgstr ""

#: ../libnm-util/nm-setting-infiniband.c:231
msgid "not a valid interface name"
msgstr ""

#: ../libnm-util/nm-setting-ip4-config.c:957
#, c-format
msgid "%d. IPv4 address is invalid"
msgstr ""

#: ../libnm-util/nm-setting-ip4-config.c:967
#, c-format
msgid "%d. IPv4 address has invalid prefix"
msgstr ""

#: ../libnm-util/nm-setting-ip4-config.c:983
#: ../libnm-util/nm-setting-ip6-config.c:937
#, c-format
msgid "%d. route has invalid prefix"
msgstr ""

#: ../libnm-util/nm-setting-ip6-config.c:911
#, c-format
msgid "%d. IPv6 address is invalid"
msgstr ""

#: ../libnm-util/nm-setting-ip6-config.c:921
#, c-format
msgid "%d. IPv6 address has invalid prefix"
msgstr ""

#: ../libnm-util/nm-setting-vpn.c:581
#, c-format
msgid "Failed to convert '%s' value '%s' to uint"
msgstr ""

#: ../libnm-util/nm-setting-vpn.c:588
#, c-format
msgid "Secret flags property '%s' not found"
msgstr ""

#: ../libnm-util/nm-setting-wireless.c:806
#, c-format
msgid "requires setting '%s' property"
msgstr ""

#: ../libnm/nm-device-adsl.c:72
msgid "The connection was not an ADSL connection."
msgstr ""

#: ../libnm/nm-device-bond.c:111
msgid "The connection was not a bond connection."
msgstr ""

#: ../libnm/nm-device-bridge.c:115
msgid "The connection was not a bridge connection."
msgstr ""

#: ../libnm/nm-device-bt.c:137
#, c-format
msgid "The connection was not a Bluetooth connection."
msgstr ""

#: ../libnm/nm-device-bt.c:143
#, c-format
msgid "The connection is of Bluetooth NAP type."
msgstr ""

#: ../libnm/nm-device-bt.c:152
msgid "Invalid device Bluetooth address."
msgstr ""

#: ../libnm/nm-device-bt.c:158
msgid "The Bluetooth addresses of the device and the connection didn't match."
msgstr ""

#: ../libnm/nm-device-bt.c:167
msgid ""
"The device is lacking Bluetooth capabilities required by the connection."
msgstr ""

#: ../libnm/nm-device-dummy.c:76
msgid "The connection was not a dummy connection."
msgstr ""

#: ../libnm/nm-device-dummy.c:83 ../libnm/nm-device-generic.c:97
#: ../libnm/nm-device-ovs-bridge.c:97 ../libnm/nm-device-ovs-interface.c:68
#: ../libnm/nm-device-ovs-port.c:96
msgid "The connection did not specify an interface name."
msgstr ""

#: ../libnm/nm-device-ethernet.c:206
msgid "The connection was not an Ethernet or PPPoE connection."
msgstr ""

#: ../libnm/nm-device-ethernet.c:221
msgid "The connection and device differ in S390 subchannels."
msgstr ""

#: ../libnm/nm-device-ethernet.c:236
#, c-format
msgid "Invalid device MAC address %s."
msgstr ""

#: ../libnm/nm-device-ethernet.c:241
msgid "The MACs of the device and the connection do not match."
msgstr ""

#: ../libnm/nm-device-ethernet.c:251
#, c-format
msgid "Invalid MAC in the blacklist: %s."
msgstr ""

#: ../libnm/nm-device-ethernet.c:257
#, c-format
msgid "Device MAC (%s) is blacklisted by the connection."
msgstr ""

#: ../libnm/nm-device-generic.c:90
msgid "The connection was not a generic connection."
msgstr ""

#: ../libnm/nm-device-tun.c:208
msgid "The connection was not a tun connection."
msgstr ""

#: ../libnm/nm-device-tun.c:217
msgid "The mode of the device and the connection didn't match"
msgstr ""

#: ../libnm/nm-device-infiniband.c:93
msgid "The connection was not an InfiniBand connection."
msgstr ""

#: ../libnm/nm-device-infiniband.c:101 ../libnm/nm-device-wifi.c:625
#: ../libnm/nm-device-wimax.c:324
msgid "Invalid device MAC address."
msgstr ""

#: ../libnm/nm-device-infiniband.c:109 ../libnm/nm-device-wifi.c:632
#: ../libnm/nm-device-wimax.c:331
msgid "The MACs of the device and the connection didn't match."
msgstr ""

#: ../libnm/nm-device-ip-tunnel.c:271
msgid "The connection was not an IP tunnel connection."
msgstr ""

#: ../libnm/nm-device-macvlan.c:157
msgid "The connection was not a MAC-VLAN connection."
msgstr ""

#: ../libnm/nm-device-modem.c:119
msgid "The connection was not a modem connection."
msgstr ""

#: ../libnm/nm-device-modem.c:127
msgid "The connection was not a valid modem connection."
msgstr ""

#: ../libnm/nm-device-modem.c:134
msgid "The device is lacking capabilities required by the connection."
msgstr ""

#: ../libnm/nm-device-olpc-mesh.c:114
msgid "The connection was not an OLPC Mesh connection."
msgstr ""

#: ../libnm/nm-device-ovs-bridge.c:90
msgid "The connection was not a ovs_bridge connection."
msgstr ""

#: ../libnm/nm-device-ovs-interface.c:61
msgid "The connection was not a ovs_interface connection."
msgstr ""

#: ../libnm/nm-device-ovs-port.c:89
msgid "The connection was not a ovs_port connection."
msgstr ""

#: ../libnm/nm-device-team.c:138
msgid "The connection was not a team connection."
msgstr ""

#: ../libnm/nm-device-vlan.c:128
msgid "The connection was not a VLAN connection."
msgstr ""

#: ../libnm/nm-device-vlan.c:135
msgid "The VLAN identifiers of the device and the connection didn't match."
msgstr ""

#: ../libnm/nm-device-vlan.c:150
msgid "The hardware address of the device and the connection didn't match."
msgstr ""

#: ../libnm/nm-device-vxlan.c:386
msgid "The connection was not a VXLAN connection."
msgstr ""

#: ../libnm/nm-device-vxlan.c:393
msgid "The VXLAN identifiers of the device and the connection didn't match."
msgstr ""

#: ../libnm/nm-device-wifi.c:616
msgid "The connection was not a Wi-Fi connection."
msgstr ""

#: ../libnm/nm-device-wifi.c:652
msgid "The device is lacking WPA capabilities required by the connection."
msgstr ""

#: ../libnm/nm-device-wifi.c:659
msgid "The device is lacking WPA2/RSN capabilities required by the connection."
msgstr ""

#: ../libnm/nm-device-wimax.c:315
msgid "The connection was not a WiMAX connection."
msgstr ""

#: ../libnm/nm-device-wpan.c:82
msgid "The connection was not a wpan connection."
msgstr ""

#: ../libnm/nm-device.c:1388
msgid "Open vSwitch Interface"
msgstr ""

#: ../libnm/nm-device.c:1390
msgid "Open vSwitch Port"
msgstr ""

#: ../libnm/nm-device.c:1392
msgid "Open vSwitch Bridge"
msgstr ""

#: ../libnm/nm-device.c:1420
msgid "MACsec"
msgstr ""

#: ../libnm/nm-device.c:1422
msgid "Dummy"
msgstr ""

#: ../libnm/nm-device.c:1424
msgid "PPP"
msgstr ""

#: ../libnm/nm-device.c:1426
msgid "IEEE 802.15.4"
msgstr ""

#: ../libnm/nm-device.c:1428
msgid "6LoWPAN"
msgstr ""

#: ../libnm/nm-device.c:1430
msgid "WireGuard"
msgstr ""

#: ../libnm/nm-device.c:2549
#, c-format
msgid "The connection was not valid: %s"
msgstr ""

#: ../libnm/nm-device.c:2558
#, c-format
msgid "The interface names of the device and the connection didn't match."
msgstr ""

#: ../libnm/nm-manager.c:274
msgid "Checkpoint was removed before it was initialized"
msgstr ""

#: ../libnm/nm-manager.c:953
msgid "Active connection removed before it was initialized"
msgstr ""

#: ../libnm/nm-remote-settings.c:256
msgid "Connection removed before it was initialized"
msgstr ""

#: ../libnm/nm-vpn-plugin-old.c:847 ../libnm/nm-vpn-service-plugin.c:1051
msgid "No service name specified"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:1
msgid "Enable or disable system networking"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:2
msgid "System policy prevents enabling or disabling system networking"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:3
msgid "Reload NetworkManager configuration"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:4
msgid "System policy prevents reloading NetworkManager"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:5
msgid ""
"Put NetworkManager to sleep or wake it up (should only be used by system "
"power management)"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:6
msgid "System policy prevents putting NetworkManager to sleep or waking it up"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:7
msgid "Enable or disable Wi-Fi devices"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:8
msgid "System policy prevents enabling or disabling Wi-Fi devices"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:9
msgid "Enable or disable mobile broadband devices"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:10
msgid "System policy prevents enabling or disabling mobile broadband devices"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:11
msgid "Enable or disable WiMAX mobile broadband devices"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:12
msgid ""
"System policy prevents enabling or disabling WiMAX mobile broadband devices"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:13
msgid "Allow control of network connections"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:14
msgid "System policy prevents control of network connections"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:15
msgid "Connection sharing via a protected Wi-Fi network"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:16
msgid ""
"System policy prevents sharing connections via a protected Wi-Fi network"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:17
msgid "Connection sharing via an open Wi-Fi network"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:18
msgid "System policy prevents sharing connections via an open Wi-Fi network"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:19
msgid "Modify personal network connections"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:20
msgid "System policy prevents modification of personal network settings"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:21
msgid "Modify network connections for all users"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:22
msgid "System policy prevents modification of network settings for all users"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:23
msgid "Modify persistent system hostname"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:24
msgid "System policy prevents modification of the persistent system hostname"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:25
msgid "Modify persistent global DNS configuration"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:26
msgid ""
"System policy prevents modification of the persistent global DNS "
"configuration"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:27
msgid "Perform a checkpoint or rollback of interfaces configuration"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:28
msgid "System policy prevents the creation of a checkpoint or its rollback"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:29
msgid "Enable or disable device statistics"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:30
msgid "System policy prevents enabling or disabling device statistics"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:31
#, fuzzy
msgid "Enable or disable connectivity checking"
msgstr "IV määramine dešifreerimiseks nurjus: %s / %s."

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:32
msgid "System policy prevents enabling or disabling connectivity checking"
msgstr ""

#: ../shared/nm-utils/nm-shared-utils.c:1130
#, c-format
msgid "object class '%s' has no property named '%s'"
msgstr ""

#: ../shared/nm-utils/nm-shared-utils.c:1137
#, c-format
msgid "property '%s' of object class '%s' is not writable"
msgstr ""

#: ../shared/nm-utils/nm-shared-utils.c:1144
#, c-format
msgid ""
"construct property \"%s\" for object '%s' can't be set after construction"
msgstr ""

#: ../shared/nm-utils/nm-shared-utils.c:1152
#, c-format
msgid "'%s::%s' is not a valid property name; '%s' is not a GObject subtype"
msgstr ""

#: ../shared/nm-utils/nm-shared-utils.c:1161
#, c-format
msgid "unable to set property '%s' of type '%s' from value of type '%s'"
msgstr ""

#: ../shared/nm-utils/nm-shared-utils.c:1172
#, c-format
msgid ""
"value \"%s\" of type '%s' is invalid or out of range for property '%s' of "
"type '%s'"
msgstr ""

#. TRANSLATORS: the first %s is a prefix for the connection id, such
#. * as "Wired Connection" or "VPN Connection". The %d is a number
#. * that is combined with the first argument to create a unique
#. * connection id.
#: ../src/NetworkManagerUtils.c:120
#, c-format
msgctxt "connection id fallback"
msgid "%s %u"
msgstr ""

#: ../src/main.c:180 ../src/main.c:315
#, c-format
msgid "Failed to read configuration: %s\n"
msgstr ""

#. Logging/debugging
#: ../src/main.c:194 ../src/nm-iface-helper.c:297
msgid "Print NetworkManager version and exit"
msgstr ""

#: ../src/main.c:195 ../src/nm-iface-helper.c:298
msgid "Don't become a daemon"
msgstr ""

#: ../src/main.c:196 ../src/nm-iface-helper.c:300
#, c-format
msgid "Log level: one of [%s]"
msgstr ""

#: ../src/main.c:198 ../src/nm-iface-helper.c:302
#, c-format
msgid "Log domains separated by ',': any combination of [%s]"
msgstr ""

#: ../src/main.c:200 ../src/nm-iface-helper.c:304
msgid "Make all warnings fatal"
msgstr ""

#: ../src/main.c:201
msgid "Specify the location of a PID file"
msgstr ""

#: ../src/main.c:203
msgid "Print NetworkManager configuration and exit"
msgstr ""

#: ../src/main.c:213
msgid ""
"NetworkManager monitors all network connections and automatically\n"
"chooses the best connection to use.  It also allows the user to\n"
"specify wireless access points which wireless cards in the computer\n"
"should associate with."
msgstr ""

#: ../src/main.c:305 ../src/main-utils.c:286 ../src/nm-iface-helper.c:441
#, fuzzy, c-format
msgid "%s.  Please use --help to see a list of valid options.\n"
msgstr ""
"Vigane valik.  Kasuta --help võtit sobivate valikute nimistu nägemiseks.\n"

#: ../src/main.c:340 ../src/nm-iface-helper.c:456
#, c-format
msgid "Could not daemonize: %s [error %u]\n"
msgstr ""

#: ../src/main-utils.c:99
#, c-format
msgid "Opening %s failed: %s\n"
msgstr ""

#: ../src/main-utils.c:105
#, c-format
msgid "Writing to %s failed: %s\n"
msgstr ""

#: ../src/main-utils.c:110
#, c-format
msgid "Closing %s failed: %s\n"
msgstr ""

#: ../src/main-utils.c:148 ../src/main-utils.c:159
#, c-format
msgid "Cannot create '%s': %s"
msgstr ""

#: ../src/main-utils.c:212
#, c-format
msgid "%s is already running (pid %ld)\n"
msgstr ""

#: ../src/main-utils.c:222
#, c-format
msgid "You must be root to run %s!\n"
msgstr ""

#: ../src/dhcp/nm-dhcp-dhclient-utils.c:291
msgid "# Created by NetworkManager\n"
msgstr "# Loodud NetworkManager'i poolt\n"

#: ../src/dhcp/nm-dhcp-dhclient-utils.c:302
#, c-format
msgid ""
"# Merged from %s\n"
"\n"
msgstr ""
"# Liidetud allikast %s\n"
"\n"

#: ../src/devices/bluetooth/nm-bluez-device.c:212
#, c-format
msgid "%s Network"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:272
msgid "PAN requested, but Bluetooth device does not support NAP"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:282
msgid "PAN connections cannot specify GSM, CDMA, or serial settings"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:295
msgid "PAN connection"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:302
msgid "DUN requested, but Bluetooth device does not support DUN"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:312
msgid "DUN connection must include a GSM or CDMA setting"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:322
#: ../src/devices/wwan/nm-modem-broadband.c:696
msgid "GSM connection"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:324
#: ../src/devices/wwan/nm-modem-broadband.c:720
msgid "CDMA connection"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:332
msgid "Unknown/unhandled Bluetooth connection type"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:353
#: ../src/devices/nm-device-ethernet.c:1432
#: ../src/devices/nm-device-infiniband.c:190
#: ../src/devices/wifi/nm-device-wifi.c:908
msgid "connection does not match device"
msgstr ""

#: ../src/devices/nm-device-6lowpan.c:191
#, fuzzy
msgid "6LOWPAN connection"
msgstr "IV määramine dešifreerimiseks nurjus: %s / %s."

#: ../src/devices/nm-device-bond.c:72
msgid "Bond connection"
msgstr ""

#: ../src/devices/nm-device-bridge.c:153
msgid "Bridge connection"
msgstr ""

#: ../src/devices/nm-device-dummy.c:68
#, fuzzy
msgid "Dummy connection"
msgstr "IV määramine dešifreerimiseks nurjus: %s / %s."

#: ../src/devices/nm-device-ethernet.c:1413
msgid "PPPoE connection"
msgstr ""

#: ../src/devices/nm-device-ethernet.c:1413
msgid "Wired connection"
msgstr ""

#: ../src/devices/nm-device-ethernet-utils.c:33
#, c-format
msgid "Wired connection %d"
msgstr ""

#: ../src/devices/nm-device-ip-tunnel.c:419
msgid "IP tunnel connection"
msgstr ""

#: ../src/devices/nm-device-macvlan.c:366
msgid "MACVLAN connection"
msgstr ""

#: ../src/devices/nm-device-tun.c:158
msgid "TUN connection"
msgstr ""

#: ../src/devices/nm-device-wpan.c:69
#, fuzzy
msgid "WPAN connection"
msgstr "IV määramine dešifreerimiseks nurjus: %s / %s."

#: ../src/devices/team/nm-device-team.c:102
msgid "Team connection"
msgstr ""

#: ../src/devices/wifi/nm-device-olpc-mesh.c:136
msgid "Mesh"
msgstr ""

#: ../src/devices/wifi/nm-device-wifi.c:881
msgid "WPA Ad-Hoc disabled due to kernel bugs"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:43
#, c-format
msgid "%s is incompatible with static WEP keys"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:77
msgid "LEAP authentication requires a LEAP username"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:87
msgid "LEAP username requires 'leap' authentication"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:100
msgid "LEAP authentication requires IEEE 802.1x key management"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:120
msgid "LEAP authentication is incompatible with Ad-Hoc mode"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:132
msgid "LEAP authentication is incompatible with 802.1x setting"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:154
#, c-format
msgid "a connection using '%s' authentication cannot use WPA key management"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:165
#, c-format
msgid "a connection using '%s' authentication cannot specify WPA protocols"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:181
#: ../src/devices/wifi/nm-wifi-utils.c:198
#, c-format
msgid "a connection using '%s' authentication cannot specify WPA ciphers"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:210
#, c-format
msgid "a connection using '%s' authentication cannot specify a WPA password"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:241
msgid "Dynamic WEP requires an 802.1x setting"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:251
#: ../src/devices/wifi/nm-wifi-utils.c:279
msgid "Dynamic WEP requires 'open' authentication"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:266
msgid "Dynamic WEP requires 'ieee8021x' key management"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:313
msgid "WPA-PSK authentication is incompatible with 802.1x"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:323
msgid "WPA-PSK requires 'open' authentication"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:335
msgid "WPA Ad-Hoc authentication requires an Ad-Hoc mode AP"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:348
msgid "WPA Ad-Hoc authentication requires 'wpa' protocol"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:360
msgid "WPA Ad-Hoc authentication requires 'none' pairwise cipher"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:372
msgid "WPA Ad-Hoc requires 'tkip' group cipher"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:386
msgid "Access point does not support PSK but setting requires it"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:416
msgid "WPA-EAP authentication requires an 802.1x setting"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:426
msgid "WPA-EAP requires 'open' authentication"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:437
msgid "802.1x setting requires 'wpa-eap' key management"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:450
msgid "Access point does not support 802.1x but setting requires it"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:478
msgid ""
"Access point mode is Ad-Hoc but setting requires Infrastructure security"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:488
msgid "Ad-Hoc mode is incompatible with 802.1x security"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:497
msgid "Ad-Hoc mode is incompatible with LEAP security"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:507
msgid "Ad-Hoc mode requires 'open' authentication"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:517
msgid ""
"Access point mode is Infrastructure but setting requires Ad-Hoc security"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:558
#: ../src/devices/wifi/nm-wifi-utils.c:586
#, c-format
msgid "connection does not match access point"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:610
msgid "Access point is unencrypted but setting specifies security"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:699
msgid ""
"WPA authentication is incompatible with non-EAP (original) LEAP or Dynamic "
"WEP"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:709
msgid "WPA authentication is incompatible with Shared Key authentication"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:756
#, fuzzy
msgid "Failed to determine AP security information"
msgstr "Sümmeetrilise võtme määramine dešifreerimiseks nurjus."

#: ../src/devices/wwan/nm-modem-broadband.c:686
msgid "GSM mobile broadband connection requires a 'gsm' setting"
msgstr ""

#: ../src/nm-config.c:563
#, c-format
msgid "Bad '%s' option: "
msgstr ""

#: ../src/nm-config.c:576
msgid "Config file location"
msgstr ""

#: ../src/nm-config.c:577
msgid "Config directory location"
msgstr ""

#: ../src/nm-config.c:578
msgid "System config directory location"
msgstr ""

#: ../src/nm-config.c:579
msgid "Internal config file location"
msgstr ""

#: ../src/nm-config.c:580
msgid "State file location"
msgstr ""

#: ../src/nm-config.c:581
msgid "State file for no-auto-default devices"
msgstr ""

#: ../src/nm-config.c:582
msgid "List of plugins separated by ','"
msgstr ""

#: ../src/nm-config.c:583
msgid "Quit after initial configuration"
msgstr ""

#: ../src/nm-config.c:584 ../src/nm-iface-helper.c:299
msgid "Don't become a daemon, and log to stderr"
msgstr ""

#. These three are hidden for now, and should eventually just go away.
#: ../src/nm-config.c:587
msgid "An http(s) address for checking internet connectivity"
msgstr ""

#: ../src/nm-config.c:588
msgid "The interval between connectivity checks (in seconds)"
msgstr ""

#: ../src/nm-config.c:589
msgid "The expected start of the response"
msgstr ""

#: ../src/nm-config.c:596
#, fuzzy
msgid "NetworkManager options"
msgstr "# Loodud NetworkManager'i poolt\n"

#: ../src/nm-config.c:596
#, fuzzy
msgid "Show NetworkManager options"
msgstr "# Loodud NetworkManager'i poolt\n"

#. Interface/IP config
#: ../src/nm-iface-helper.c:279
msgid "The interface to manage"
msgstr ""

#: ../src/nm-iface-helper.c:280
msgid "Connection UUID"
msgstr ""

#: ../src/nm-iface-helper.c:281
msgid "Connection Token for Stable IDs"
msgstr ""

#: ../src/nm-iface-helper.c:282
msgid "Whether to manage IPv6 SLAAC"
msgstr ""

#: ../src/nm-iface-helper.c:283
msgid "Whether SLAAC must be successful"
msgstr ""

#: ../src/nm-iface-helper.c:284
msgid "Use an IPv6 temporary privacy address"
msgstr ""

#: ../src/nm-iface-helper.c:285
msgid "Current DHCPv4 address"
msgstr ""

#: ../src/nm-iface-helper.c:286
msgid "Whether DHCPv4 must be successful"
msgstr ""

#: ../src/nm-iface-helper.c:287
msgid "Hex-encoded DHCPv4 client ID"
msgstr ""

#: ../src/nm-iface-helper.c:288
msgid "Hostname to send to DHCP server"
msgstr ""

#: ../src/nm-iface-helper.c:288
msgid "barbar"
msgstr ""

#: ../src/nm-iface-helper.c:289
msgid "FQDN to send to DHCP server"
msgstr ""

#: ../src/nm-iface-helper.c:289
msgid "host.domain.org"
msgstr ""

#: ../src/nm-iface-helper.c:290
msgid "Route priority for IPv4"
msgstr ""

#: ../src/nm-iface-helper.c:290
msgid "0"
msgstr ""

#: ../src/nm-iface-helper.c:291
msgid "Route priority for IPv6"
msgstr ""

#: ../src/nm-iface-helper.c:291
msgid "1024"
msgstr ""

#: ../src/nm-iface-helper.c:292
msgid "Hex-encoded Interface Identifier"
msgstr ""

#: ../src/nm-iface-helper.c:293
msgid "IPv6 SLAAC address generation mode"
msgstr ""

#: ../src/nm-iface-helper.c:294
msgid ""
"The logging backend configuration value. See logging.backend in "
"NetworkManager.conf"
msgstr ""

#: ../src/nm-iface-helper.c:314
msgid ""
"nm-iface-helper is a small, standalone process that manages a single network "
"interface."
msgstr ""

#: ../src/nm-iface-helper.c:422
#, c-format
msgid "An interface name and UUID are required\n"
msgstr ""

#: ../src/nm-iface-helper.c:428
#, c-format
msgid "Failed to find interface index for %s (%s)\n"
msgstr ""

#: ../src/nm-iface-helper.c:446
#, c-format
msgid "Ignoring unrecognized log domain(s) '%s' passed on command line.\n"
msgstr ""

#: ../src/nm-iface-helper.c:485
#, c-format
msgid "(%s): Invalid IID %s\n"
msgstr ""

#: ../src/nm-iface-helper.c:496
#, c-format
msgid "(%s): Invalid DHCP client-id %s\n"
msgstr ""

#: ../src/nm-logging.c:275
#, c-format
msgid "Unknown log level '%s'"
msgstr ""

#: ../src/nm-logging.c:377
#, c-format
msgid "Unknown log domain '%s'"
msgstr ""