# translation of NetworkManager.po to Hindi
# This file is distributed under the same license as the PACKAGE package.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER.
# rajesh <rajesh>, 2012.
# Rajesh Ranjan <rajeshkajha@yahoo.com>, 2012, 2013, 2014.
# chandankumar <chandankumar.093047@gmail.com>, 2012.
# Lubomir Rintel <lkundrak@v3.sk>, 2016. #zanata
# Lubomir Rintel <lkundrak@v3.sk>, 2017. #zanata
# Thomas Haller <thaller@redhat.com>, 2017. #zanata
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2019-05-28 14:23+0200\n"
"PO-Revision-Date: 2017-04-21 05:25-0400\n"
"Last-Translator: Copied by Zanata <copied-by-zanata@zanata.org>\n"
"Language-Team: Hindi <kde-i18n-doc@kde.org>\n"
"Language: hi\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n!=1);\n"
"X-DamnedLies-Scope: partial\n"
"X-Generator: Zanata 3.9.6\n"

#: ../clients/cli/agent.c:39
#, c-format
msgid ""
"Usage: nmcli agent { COMMAND | help }\n"
"\n"
"COMMAND := { secret | polkit | all }\n"
"\n"
msgstr ""

#: ../clients/cli/agent.c:47
#, c-format
msgid ""
"Usage: nmcli agent secret { help }\n"
"\n"
"Runs nmcli as NetworkManager secret agent. When NetworkManager requires\n"
"a password it asks registered agents for it. This command keeps nmcli "
"running\n"
"and if a password is required asks the user for it.\n"
"\n"
msgstr ""

#: ../clients/cli/agent.c:57
#, c-format
msgid ""
"Usage: nmcli agent polkit { help }\n"
"\n"
"Registers nmcli as a polkit action for the user session.\n"
"When a polkit daemon requires an authorization, nmcli asks the user and "
"gives\n"
"the response back to polkit.\n"
"\n"
msgstr ""

#: ../clients/cli/agent.c:67
#, c-format
msgid ""
"Usage: nmcli agent all { help }\n"
"\n"
"Runs nmcli as both NetworkManager secret and a polkit agent.\n"
"\n"
msgstr ""

#: ../clients/cli/agent.c:159
#, c-format
msgid "nmcli successfully registered as a NetworkManager's secret agent.\n"
msgstr ""

#: ../clients/cli/agent.c:161
#, fuzzy, c-format
msgid "Error: secret agent initialization failed"
msgstr "मोडेम आरम्भीकरण असफ़ल रहा"

#: ../clients/cli/agent.c:180
#, fuzzy, c-format
msgid "Error: polkit agent initialization failed: %s"
msgstr "त्रुटि: कनेक्शन सक्रियकरण विफल: %s"

#: ../clients/cli/agent.c:188
#, c-format
msgid "nmcli successfully registered as a polkit agent.\n"
msgstr ""

#: ../clients/cli/common.c:360 ../clients/cli/common.c:361
#: ../clients/cli/common.c:392 ../clients/cli/common.c:393
#: ../clients/cli/connections.c:1460
msgid "GROUP"
msgstr "समूह"

#: ../clients/cli/common.c:644
#, fuzzy, c-format
msgid "Error: openconnect failed: %s\n"
msgstr "त्रुटि: कनेक्शन जाँच विफलता: %s\n"

#: ../clients/cli/common.c:651
#, fuzzy, c-format
msgid "Error: openconnect failed with status %d\n"
msgstr "%d स्थिति के साथ संपादक विफल"

#: ../clients/cli/common.c:653
#, fuzzy, c-format
msgid "Error: openconnect failed with signal %d\n"
msgstr "%d संकेत के साथ संपादक विफल"

#: ../clients/cli/common.c:741
#, c-format
msgid ""
"Warning: password for '%s' not given in 'passwd-file' and nmcli cannot ask "
"without '--ask' option.\n"
msgstr ""

#: ../clients/cli/common.c:1241
#, c-format
msgid "Error: Could not create NMClient object: %s."
msgstr "त्रुटि: NMClient ऑब्जेक्ट नहीं बना सका: %s."

#: ../clients/cli/common.c:1261
msgid "Error: NetworkManager is not running."
msgstr "त्रुटि: यदि नेटवर्कप्रबंधक नहीं चल रहा है "

#: ../clients/cli/common.c:1357
#, c-format
msgid "Error: argument '%s' not understood. Try passing --help instead."
msgstr ""

#: ../clients/cli/common.c:1367
#, fuzzy
msgid "Error: missing argument. Try passing --help."
msgstr "त्रुटि: '%s' विकल्प के लिए अनुपस्थित तर्क."

#: ../clients/cli/common.c:1436
msgid "access denied"
msgstr ""

#: ../clients/cli/common.c:1444 ../clients/cli/connections.c:79
#: ../clients/cli/connections.c:88 ../clients/cli/devices.c:438
#: ../clients/cli/devices.c:530 ../clients/cli/devices.c:537
#: ../clients/cli/general.c:40 ../clients/cli/general.c:130
#: ../clients/cli/general.c:135 ../clients/common/nm-client-utils.c:264
#: ../clients/common/nm-client-utils.c:277
#: ../clients/common/nm-client-utils.c:281
#: ../clients/common/nm-client-utils.c:286
#: ../clients/common/nm-meta-setting-desc.c:1711
#: ../clients/common/nm-meta-setting-desc.c:1742
#: ../clients/common/nm-meta-setting-desc.c:2667
#: ../clients/common/nm-meta-setting-desc.c:2725
msgid "unknown"
msgstr "अज्ञात"

#: ../clients/cli/common.c:1445
msgid "none"
msgstr "कुछ नहीं"

#: ../clients/cli/common.c:1446
msgid "portal"
msgstr "पोर्टल"

#: ../clients/cli/common.c:1447
msgid "limited"
msgstr "सीमित"

#: ../clients/cli/common.c:1448
msgid "full"
msgstr "पूर्ण"

#. define some prompts for connection editor
#: ../clients/cli/connections.c:63
msgid "Setting name? "
msgstr "सेटिंग नाम? "

#: ../clients/cli/connections.c:64
msgid "Property name? "
msgstr "गुण नाम?"

#: ../clients/cli/connections.c:65
msgid "Enter connection type: "
msgstr "कनेक्शन प्रकार दर्ज करें: "

#. define some other prompts
#: ../clients/cli/connections.c:69
#, fuzzy
msgid "Connection (name, UUID, or path): "
msgstr "कनेक्शन (नाम, UUID, या पथ): "

#: ../clients/cli/connections.c:70
#, fuzzy
msgid "VPN connection (name, UUID, or path): "
msgstr "कनेक्शन (नाम, UUID, या पथ): "

#: ../clients/cli/connections.c:71
#, fuzzy
msgid "Connection(s) (name, UUID, or path): "
msgstr "कनेक्शन (नाम, UUID, या पथ): "

#: ../clients/cli/connections.c:72
#, fuzzy
msgid "Connection(s) (name, UUID, path or apath): "
msgstr "कनेक्शन (नाम, UUID, या पथ): "

#: ../clients/cli/connections.c:80
msgid "activating"
msgstr "सक्रिय कर रहा है"

#: ../clients/cli/connections.c:81
msgid "activated"
msgstr "सक्रिय किया हुआ"

#: ../clients/cli/connections.c:82 ../clients/common/nm-client-utils.c:275
msgid "deactivating"
msgstr "अक्रिय कर रहा है"

#: ../clients/cli/connections.c:83
msgid "deactivated"
msgstr "निष्क्रिय किया गया"

#: ../clients/cli/connections.c:89
msgid "VPN connecting (prepare)"
msgstr "VPN कनेक्टिंग (तैयार)"

#: ../clients/cli/connections.c:90
msgid "VPN connecting (need authentication)"
msgstr "VPN कनेक्टिंग (सत्यापन जरूरी)"

#: ../clients/cli/connections.c:91
msgid "VPN connecting"
msgstr "VPN कनेक्टिंग"

#: ../clients/cli/connections.c:92
msgid "VPN connecting (getting IP configuration)"
msgstr "VPN कनेक्टिंग (IP विन्यास पा रहा है)"

#: ../clients/cli/connections.c:93
msgid "VPN connected"
msgstr "VPN कनेक्टेड"

#: ../clients/cli/connections.c:94
msgid "VPN connection failed"
msgstr "VPN कनेक्शन विफल"

#: ../clients/cli/connections.c:95
msgid "VPN disconnected"
msgstr "VPN डिसकनेक्टेंड"

#: ../clients/cli/connections.c:516
msgid "never"
msgstr "कभी नहीं"

#: ../clients/cli/connections.c:868
#, fuzzy, c-format
msgid ""
"Usage: nmcli connection { COMMAND | help }\n"
"\n"
"COMMAND := { show | up | down | add | modify | clone | edit | delete | "
"monitor | reload | load | import | export }\n"
"\n"
"  show [--active] [--order <order spec>]\n"
"  show [--active] [id | uuid | path | apath] <ID> ...\n"
"\n"
"  up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>] [passwd-file "
"<file with passwords>]\n"
"\n"
"  down [id | uuid | path | apath] <ID> ...\n"
"\n"
"  add COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- "
"([+|-]<setting>.<property> <value>)+]\n"
"\n"
"  modify [--temporary] [id | uuid | path] <ID> ([+|-]<setting>.<property> "
"<value>)+\n"
"\n"
"  clone [--temporary] [id | uuid | path ] <ID> <new name>\n"
"\n"
"  edit [id | uuid | path] <ID>\n"
"  edit [type <new_con_type>] [con-name <new_con_name>]\n"
"\n"
"  delete [id | uuid | path] <ID>\n"
"\n"
"  monitor [id | uuid | path] <ID> ...\n"
"\n"
"  reload\n"
"\n"
"  load <filename> [ <filename>... ]\n"
"\n"
"  import [--temporary] type <type> file <file to import>\n"
"\n"
"  export [id | uuid | path] <ID> [<output file>]\n"
"\n"
msgstr ""
"Usage: nmcli connection { COMMAND | help }\n"
"\n"
"COMMAND := { show | up | down | add | modify | edit | delete | reload | "
"load }\n"
"\n"
"  show [--active] [[id | uuid | path | apath] <ID>] ...\n"
"\n"
"  up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>] [nsp <name>]\n"
"\n"
"  up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>]\n"
"\n"
"  down [id | uuid | path | apath] <ID>\n"
"\n"
"  add COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS IP_OPTIONS\n"
"\n"
"  modify [--temporary] [id | uuid | path] <ID> ([+|-]<setting>.<property> "
"<value>)+\n"
"\n"
"  edit [id | uuid | path] <ID>\n"
"  edit [type <new_con_type>] [con-name <new_con_name>]\n"
"\n"
"  delete [id | uuid | path] <ID>\n"
"\n"
"  reload\n"
"\n"
"  load <filename> [ <filename>... ]\n"
"\n"

#: ../clients/cli/connections.c:890
#, fuzzy, c-format
msgid ""
"Usage: nmcli connection show { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [--active] [--order <order spec>]\n"
"\n"
"List in-memory and on-disk connection profiles, some of which may also be\n"
"active if a device is using that connection profile. Without a parameter, "
"all\n"
"profiles are listed. When --active option is specified, only the active\n"
"profiles are shown. --order allows custom connection ordering (see manual "
"page).\n"
"\n"
"ARGUMENTS := [--active] [id | uuid | path | apath] <ID> ...\n"
"\n"
"Show details for specified connections. By default, both static "
"configuration\n"
"and active connection data are displayed. It is possible to filter the "
"output\n"
"using global '--fields' option. Refer to the manual page for more "
"information.\n"
"When --active option is specified, only the active profiles are taken into\n"
"account. Use global --show-secrets option to reveal associated secrets as "
"well.\n"
msgstr ""
"Usage: nmcli connection show { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [--active]\n"
"\n"
"List in-memory and on-disk connection profiles, some of which may also be\n"
"active if a device is using that connection profile. Without a parameter, "
"all\n"
"profiles are listed. When --active option is specified, only the active\n"
"profiles are shown.\n"
"\n"
"ARGUMENTS := [--active] [id | uuid | path | apath] <ID> ...\n"
"\n"
"Show details for specified connections. By default, both static "
"configuration\n"
"and active connection data are displayed. It is possible to filter the "
"output\n"
"using global '--fields' option. Refer to the manual page for more "
"information.\n"
"When --active option is specified, only the active profiles are taken into\n"
"account.\n"

#: ../clients/cli/connections.c:911
#, fuzzy, c-format
msgid ""
"Usage: nmcli connection up { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> [ifname <ifname>] [ap <BSSID>] [nsp "
"<name>] [passwd-file <file with passwords>]\n"
"\n"
"Activate a connection on a device. The profile to activate is identified by "
"its\n"
"name, UUID or D-Bus path.\n"
"\n"
"ARGUMENTS := ifname <ifname> [ap <BSSID>] [nsp <name>] [passwd-file <file "
"with passwords>]\n"
"\n"
"Activate a device with a connection. The connection profile is selected\n"
"automatically by NetworkManager.\n"
"\n"
"ifname      - specifies the device to active the connection on\n"
"ap          - specifies AP to connect to (only valid for Wi-Fi)\n"
"nsp         - specifies NSP to connect to (only valid for WiMAX)\n"
"passwd-file - file with password(s) required to activate the connection\n"
"\n"
msgstr ""
"प्रयोग: nmcli connection up { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> [ifname <ifname>] [ap <BSSID>] [nsp "
"<name>]\n"
"\n"
"किसी युक्ति पर कनेक्शन को सक्रिय करें. सक्रिय करने के लिए प्रोफ़ाइल\n"
"इसके नाम, UUID या D-Bus पथ के द्वारा पहचाने जाते हैं.\n"
"\n"
"ARGUMENTS := ifname <ifname> [ap <BSSID>] [nsp <name>]\n"
"\n"
"कनेक्शन के साथ युक्ति को सक्रिय करें. कनेक्शन प्रोफ़ाइल\n"
"NetworkManager द्वारा स्वचालित रूप से चुना गया है.\n"
"\n"
"ifname - कनेक्शन सक्रिय करने के लिए युक्ति निर्दिष्ट करता है\n"
"ap     - AP को निर्दिष्ट करता है जिसमें कनेक्ट किया जाना है (केवल Wi-Fi के लिए वैध है)\n"
"nsp    - NSP निर्दिष्ट करता है जिसमें कनेक्ट करना है (केवल WiMAX के लिए वैध)\n"
"\n"

#: ../clients/cli/connections.c:932
#, fuzzy, c-format
msgid ""
"Usage: nmcli connection down { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path | apath] <ID> ...\n"
"\n"
"Deactivate a connection from a device (without preventing the device from\n"
"further auto-activation). The profile to deactivate is identified by its "
"name,\n"
"UUID or D-Bus path.\n"
"\n"
msgstr ""
"प्रयोग: nmcli connection down { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path | apath] <ID>\n"
"\n"
"किसी युक्ति से कनेक्शन निष्क्रिय करें (आगे स्वचालित सक्रियकरण से\n"
"रोकने के बिना). निष्क्रिय करने के लिए प्रोफ़ाइल इसके नाम के द्वारा,\n"
"UUID या D-Bus पथ के द्वारा पहचाने जाते हैं.\n"
"\n"

#: ../clients/cli/connections.c:944
#, c-format
msgid ""
"Usage: nmcli connection add { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS "
"[-- ([+|-]<setting>.<property> <value>)+]\n"
"\n"
"  COMMON_OPTIONS:\n"
"                  type <type>\n"
"                  ifname <interface name> | \"*\"\n"
"                  [con-name <connection name>]\n"
"                  [autoconnect yes|no]\n"
"                  [save yes|no]\n"
"                  [master <master (ifname, or connection UUID or name)>]\n"
"                  [slave-type <master connection type>]\n"
"\n"
"  TYPE_SPECIFIC_OPTIONS:\n"
"    ethernet:     [mac <MAC address>]\n"
"                  [cloned-mac <cloned MAC address>]\n"
"                  [mtu <MTU>]\n"
"\n"
"    wifi:         ssid <SSID>\n"
"                  [mac <MAC address>]\n"
"                  [cloned-mac <cloned MAC address>]\n"
"                  [mtu <MTU>]\n"
"                  [mode infrastructure|ap|adhoc]\n"
"\n"
"    wimax:        [mac <MAC address>]\n"
"                  [nsp <NSP>]\n"
"\n"
"    pppoe:        username <PPPoE username>\n"
"                  [password <PPPoE password>]\n"
"                  [service <PPPoE service name>]\n"
"                  [mtu <MTU>]\n"
"                  [mac <MAC address>]\n"
"\n"
"    gsm:          apn <APN>\n"
"                  [user <username>]\n"
"                  [password <password>]\n"
"\n"
"    cdma:         [user <username>]\n"
"                  [password <password>]\n"
"\n"
"    infiniband:   [mac <MAC address>]\n"
"                  [mtu <MTU>]\n"
"                  [transport-mode datagram | connected]\n"
"                  [parent <ifname>]\n"
"                  [p-key <IPoIB P_Key>]\n"
"\n"
"    bluetooth:    [addr <bluetooth address>]\n"
"                  [bt-type panu|nap|dun-gsm|dun-cdma]\n"
"\n"
"    vlan:         dev <parent device (connection UUID, ifname, or MAC)>\n"
"                  id <VLAN ID>\n"
"                  [flags <VLAN flags>]\n"
"                  [ingress <ingress priority mapping>]\n"
"                  [egress <egress priority mapping>]\n"
"                  [mtu <MTU>]\n"
"\n"
"    bond:         [mode balance-rr (0) | active-backup (1) | balance-xor (2) "
"| broadcast (3) |\n"
"                        802.3ad    (4) | balance-tlb   (5) | balance-alb "
"(6)]\n"
"                  [primary <ifname>]\n"
"                  [miimon <num>]\n"
"                  [downdelay <num>]\n"
"                  [updelay <num>]\n"
"                  [arp-interval <num>]\n"
"                  [arp-ip-target <num>]\n"
"                  [lacp-rate slow (0) | fast (1)]\n"
"\n"
"    bond-slave:   master <master (ifname, or connection UUID or name)>\n"
"\n"
"    team:         [config <file>|<raw JSON data>]\n"
"\n"
"    team-slave:   master <master (ifname, or connection UUID or name)>\n"
"                  [config <file>|<raw JSON data>]\n"
"\n"
"    bridge:       [stp yes|no]\n"
"                  [priority <num>]\n"
"                  [forward-delay <2-30>]\n"
"                  [hello-time <1-10>]\n"
"                  [max-age <6-40>]\n"
"                  [ageing-time <0-1000000>]\n"
"                  [multicast-snooping yes|no]\n"
"                  [mac <MAC address>]\n"
"\n"
"    bridge-slave: master <master (ifname, or connection UUID or name)>\n"
"                  [priority <0-63>]\n"
"                  [path-cost <1-65535>]\n"
"                  [hairpin yes|no]\n"
"\n"
"    vpn:          vpn-type vpnc|openvpn|pptp|openconnect|openswan|libreswan|"
"ssh|l2tp|iodine|...\n"
"                  [user <username>]\n"
"\n"
"    olpc-mesh:    ssid <SSID>\n"
"                  [channel <1-13>]\n"
"                  [dhcp-anycast <MAC address>]\n"
"\n"
"    adsl:         username <username>\n"
"                  protocol pppoa|pppoe|ipoatm\n"
"                  [password <password>]\n"
"                  [encapsulation vcmux|llc]\n"
"\n"
"    tun:          mode tun|tap\n"
"                  [owner <UID>]\n"
"                  [group <GID>]\n"
"                  [pi yes|no]\n"
"                  [vnet-hdr yes|no]\n"
"                  [multi-queue yes|no]\n"
"\n"
"    ip-tunnel:    mode ipip|gre|sit|isatap|vti|ip6ip6|ipip6|ip6gre|vti6\n"
"                  remote <remote endpoint IP>\n"
"                  [local <local endpoint IP>]\n"
"                  [dev <parent device (ifname or connection UUID)>]\n"
"\n"
"    macsec:       dev <parent device (connection UUID, ifname, or MAC)>\n"
"                  mode <psk|eap>\n"
"                  [cak <key> ckn <key>]\n"
"                  [encrypt yes|no]\n"
"                  [port 1-65534]\n"
"\n"
"\n"
"    macvlan:      dev <parent device (connection UUID, ifname, or MAC)>\n"
"                  mode vepa|bridge|private|passthru|source\n"
"                  [tap yes|no]\n"
"\n"
"    vxlan:        id <VXLAN ID>\n"
"                  remote <IP of multicast group or remote address>\n"
"                  [local <source IP>]\n"
"                  [dev <parent device (ifname or connection UUID)>]\n"
"                  [source-port-min <0-65535>]\n"
"                  [source-port-max <0-65535>]\n"
"                  [destination-port <0-65535>]\n"
"\n"
"    wpan:         [short-addr <0x0000-0xffff>]\n"
"                  [pan-id <0x0000-0xffff>]\n"
"                  [page <default|0-31>]\n"
"                  [channel <default|0-26>]\n"
"                  [mac <MAC address>]\n"
"\n"
"    6lowpan:      dev <parent device (connection UUID, ifname, or MAC)>\n"
"    dummy:\n"
"\n"
"  SLAVE_OPTIONS:\n"
"    bridge:       [priority <0-63>]\n"
"                  [path-cost <1-65535>]\n"
"                  [hairpin yes|no]\n"
"\n"
"    team:         [config <file>|<raw JSON data>]\n"
"\n"
"  IP_OPTIONS:\n"
"                  [ip4 <IPv4 address>] [gw4 <IPv4 gateway>]\n"
"                  [ip6 <IPv6 address>] [gw6 <IPv6 gateway>]\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1068
#, c-format
msgid ""
"Usage: nmcli connection modify { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> ([+|-]<setting>.<property> <value>)+\n"
"\n"
"Modify one or more properties of the connection profile.\n"
"The profile is identified by its name, UUID or D-Bus path. For multi-valued\n"
"properties you can use optional '+' or '-' prefix to the property name.\n"
"The '+' sign allows appending items instead of overwriting the whole value.\n"
"The '-' sign allows removing selected items instead of the whole value.\n"
"\n"
"Examples:\n"
"nmcli con mod home-wifi wifi.ssid rakosnicek\n"
"nmcli con mod em1-1 ipv4.method manual ipv4.addr \"192.168.1.2/24, "
"10.10.1.5/8\"\n"
"nmcli con mod em1-1 +ipv4.dns 8.8.4.4\n"
"nmcli con mod em1-1 -ipv4.dns 1\n"
"nmcli con mod em1-1 -ipv6.addr \"abbe::cafe/56\"\n"
"nmcli con mod bond0 +bond.options mii=500\n"
"nmcli con mod bond0 -bond.options downdelay\n"
"\n"
msgstr ""
"प्रयोग: nmcli connection modify { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> ([+|-]<setting>.<property> <value>)+\n"
"\n"
"Modify one or more properties of the connection profile.\n"
"The profile is identified by its name, UUID or D-Bus path. For multi-valued\n"
"properties you can use optional '+' or '-' prefix to the property name.\n"
"The '+' sign allows appending items instead of overwriting the whole value.\n"
"The '-' sign allows removing selected items instead of the whole value.\n"
"\n"
"Examples:\n"
"nmcli con mod home-wifi wifi.ssid rakosnicek\n"
"nmcli con mod em1-1 ipv4.method manual ipv4.addr \"192.168.1.2/24, "
"10.10.1.5/8\"\n"
"nmcli con mod em1-1 +ipv4.dns 8.8.4.4\n"
"nmcli con mod em1-1 -ipv4.dns 1\n"
"nmcli con mod em1-1 -ipv6.addr \"abbe::cafe/56\"\n"
"nmcli con mod bond0 +bond.options mii=500\n"
"nmcli con mod bond0 -bond.options downdelay\n"
"\n"

#: ../clients/cli/connections.c:1091
#, c-format
msgid ""
"Usage: nmcli connection clone { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [--temporary] [id | uuid | path] <ID> <new name>\n"
"\n"
"Clone an existing connection profile. The newly created connection will be\n"
"the exact copy of the <ID>, except the uuid property (will be generated) "
"and\n"
"id (provided as <new name> argument).\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1103
#, c-format
msgid ""
"Usage: nmcli connection edit { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID>\n"
"\n"
"Edit an existing connection profile in an interactive editor.\n"
"The profile is identified by its name, UUID or D-Bus path\n"
"\n"
"ARGUMENTS := [type <new connection type>] [con-name <new connection name>]\n"
"\n"
"Add a new connection profile in an interactive editor.\n"
"\n"
msgstr ""
"प्रयोग: nmcli connection edit { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID>\n"
"\n"
"किसी अंतःक्रियात्मक संपादक में मौजूदा कनेक्शन प्रोफ़ाइल संपादित करें.\n"
"यह प्रोफ़ाइल इसके नाम से पहचाना जाता है, UUID या D-Bus पथ द्वारा\n"
"\n"
"ARGUMENTS := [type <new connection type>] [con-name <new connection name>]\n"
"\n"
"किसी अंतःक्रियात्मक संपादक में कोई नया कनेक्शन प्रोफ़ाइल जोड़ें.\n"
"\n"

#: ../clients/cli/connections.c:1118
#, c-format
msgid ""
"Usage: nmcli connection delete { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID>\n"
"\n"
"Delete a connection profile.\n"
"The profile is identified by its name, UUID or D-Bus path.\n"
"\n"
msgstr ""
"प्रयोग: nmcli connection delete { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID>\n"
"\n"
"कनेक्शन फ़ाइल में एकल गुण के साथ बदलें.\n"
"प्रोफ़ाइल इसके नाम के द्वारा पहचाना जाता है, UUID या D-Bus पथ द्वारा.\n"
"\n"

#: ../clients/cli/connections.c:1129
#, fuzzy, c-format
msgid ""
"Usage: nmcli connection monitor { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> ...\n"
"\n"
"Monitor connection profile activity.\n"
"This command prints a line whenever the specified connection changes.\n"
"Monitors all connection profiles in case none is specified.\n"
"\n"
msgstr ""
"प्रयोग: nmcli connection edit { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID>\n"
"\n"
"किसी अंतःक्रियात्मक संपादक में मौजूदा कनेक्शन प्रोफ़ाइल संपादित करें.\n"
"यह प्रोफ़ाइल इसके नाम से पहचाना जाता है, UUID या D-Bus पथ द्वारा\n"
"\n"
"ARGUMENTS := [type <new connection type>] [con-name <new connection name>]\n"
"\n"
"किसी अंतःक्रियात्मक संपादक में कोई नया कनेक्शन प्रोफ़ाइल जोड़ें.\n"
"\n"

#: ../clients/cli/connections.c:1141
#, c-format
msgid ""
"Usage: nmcli connection reload { help }\n"
"\n"
"Reload all connection files from disk.\n"
"\n"
msgstr ""
"प्रयोग: nmcli connection reload { help }\n"
"\n"
"डिस्क से सभी कनेक्शन फ़ाइल फिर लोड करें.\n"
"\n"

#: ../clients/cli/connections.c:1149
#, c-format
msgid ""
"Usage: nmcli connection load { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <filename> [<filename>...]\n"
"\n"
"Load/reload one or more connection files from disk. Use this after manually\n"
"editing a connection file to ensure that NetworkManager is aware of its "
"latest\n"
"state.\n"
"\n"
msgstr ""
"प्रयोग: nmcli connection load { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <filename> [<filename>...]\n"
"\n"
"डिस्क से एक या अधिक कनेक्शन फ़ाइल लोड/रिलोड करें. इसका उपयोग\n"
"किसी कनेक्शन फ़ाइल का संपादन करके करें ताकि पक्का किया जा सके कि NetworkManager अपने "
"नवीनतम स्थिति\n"
"से परिचित है.\n"
"\n"

#: ../clients/cli/connections.c:1161
#, c-format
msgid ""
"Usage: nmcli connection import { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [--temporary] type <type> file <file to import>\n"
"\n"
"Import an external/foreign configuration as a NetworkManager connection "
"profile.\n"
"The type of the input file is specified by type option.\n"
"Only VPN configurations are supported at the moment. The configuration\n"
"is imported by NetworkManager VPN plugins.\n"
"\n"
msgstr ""

#: ../clients/cli/connections.c:1174
#, fuzzy, c-format
msgid ""
"Usage: nmcli connection export { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> [<output file>]\n"
"\n"
"Export a connection. Only VPN connections are supported at the moment.\n"
"The data are directed to standard output or to a file if a name is given.\n"
"\n"
msgstr ""
"प्रयोग: nmcli connection delete { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID>\n"
"\n"
"कनेक्शन फ़ाइल में एकल गुण के साथ बदलें.\n"
"प्रोफ़ाइल इसके नाम के द्वारा पहचाना जाता है, UUID या D-Bus पथ द्वारा.\n"
"\n"

#: ../clients/cli/connections.c:1264
#, fuzzy, c-format
msgid "Error updating secrets for %s: %s\n"
msgstr "कनेक्शन सहेजने में त्रुटि: %s"

#: ../clients/cli/connections.c:1313
msgid "Connection profile details"
msgstr "कनेक्शन्स प्रोफ़ाइल विवरण"

#: ../clients/cli/connections.c:1326 ../clients/cli/connections.c:1411
#, c-format
msgid "Error: 'connection show': %s"
msgstr "त्रुटि: 'कनेक्शन शो': %s"

#: ../clients/cli/connections.c:1401
msgid "Activate connection details"
msgstr "सक्रिय कनेक्शन विवरण"

#: ../clients/cli/connections.c:1509 ../clients/cli/devices.c:1447
#: ../clients/cli/devices.c:1461 ../clients/cli/devices.c:1476
#: ../clients/cli/devices.c:1534 ../clients/cli/devices.c:1636
msgid "NAME"
msgstr ""

#: ../clients/cli/connections.c:1602
#, c-format
msgid "invalid field '%s'; allowed fields: %s and %s, or %s,%s"
msgstr "अवैध क्षेत्र '%s'; अनुमतिप्राप्त क्षेत्र: %s और %s, या %s,%s"

#: ../clients/cli/connections.c:1612 ../clients/cli/connections.c:1620
#, c-format
msgid "'%s' has to be alone"
msgstr "%s' को अलग रहना है"

#: ../clients/cli/connections.c:1880
#, c-format
msgid "incorrect string '%s' of '--order' option"
msgstr ""

#: ../clients/cli/connections.c:1905
#, c-format
msgid "incorrect item '%s' in '--order' option"
msgstr ""

#: ../clients/cli/connections.c:1943
#, fuzzy
msgid "No connection specified"
msgstr "त्रुटि: कोई कनेक्शन निर्दिष्ट नहीं."

#: ../clients/cli/connections.c:1954
#, fuzzy, c-format
msgid "%s argument is missing"
msgstr "त्रुटि: %s तर्क अनुपस्थित है."

#: ../clients/cli/connections.c:1972
#, fuzzy, c-format
msgid "unknown connection '%s'"
msgstr "त्रुटि: अज्ञात कनेक्शन: %s\n"

#: ../clients/cli/connections.c:2001
#, fuzzy
msgid "'--order' argument is missing"
msgstr "त्रुटि: %s तर्क अनुपस्थित है."

#: ../clients/cli/connections.c:2061
msgid "NetworkManager active profiles"
msgstr "NetworkManager सक्रिय प्रोफ़ाइल"

#: ../clients/cli/connections.c:2062
msgid "NetworkManager connection profiles"
msgstr "NetworkManager कनेक्शन प्रोफ़ाइल"

#: ../clients/cli/connections.c:2114 ../clients/cli/connections.c:2859
#: ../clients/cli/connections.c:2871 ../clients/cli/connections.c:2883
#: ../clients/cli/connections.c:3112 ../clients/cli/connections.c:8868
#: ../clients/cli/connections.c:8889 ../clients/cli/devices.c:2970
#: ../clients/cli/devices.c:2982 ../clients/cli/devices.c:2995
#: ../clients/cli/devices.c:3189 ../clients/cli/devices.c:3200
#: ../clients/cli/devices.c:3218 ../clients/cli/devices.c:3227
#: ../clients/cli/devices.c:3248 ../clients/cli/devices.c:3259
#: ../clients/cli/devices.c:3277 ../clients/cli/devices.c:3721
#: ../clients/cli/devices.c:3731 ../clients/cli/devices.c:3739
#: ../clients/cli/devices.c:3751 ../clients/cli/devices.c:3766
#: ../clients/cli/devices.c:3774 ../clients/cli/devices.c:3949
#: ../clients/cli/devices.c:3960 ../clients/cli/devices.c:4131
#, c-format
msgid "Error: %s argument is missing."
msgstr "त्रुटि: %s तर्क अनुपस्थित है."

#: ../clients/cli/connections.c:2142
#, c-format
msgid "Error: %s - no such connection profile."
msgstr "त्रुटि: %s - कोई ऐसा कनेक्शन प्रोफ़ाइल नहीं."

#: ../clients/cli/connections.c:2233 ../clients/cli/connections.c:2846
#: ../clients/cli/connections.c:2910 ../clients/cli/connections.c:8385
#: ../clients/cli/connections.c:8491 ../clients/cli/connections.c:8994
#: ../clients/cli/devices.c:1721 ../clients/cli/devices.c:1989
#: ../clients/cli/devices.c:2162 ../clients/cli/devices.c:2270
#: ../clients/cli/devices.c:2462 ../clients/cli/devices.c:3912
#: ../clients/cli/devices.c:4137 ../clients/cli/general.c:896
#, c-format
msgid "Error: %s."
msgstr "त्रुटि: %s."

#: ../clients/cli/connections.c:2326
#, c-format
msgid "no active connection on device '%s'"
msgstr "युक्ति '%s' पर कोई सक्रिय कनेक्शन नहीं"

#: ../clients/cli/connections.c:2334
msgid "no active connection or device"
msgstr "कोई सक्रिय कनेक्शन या युक्ति नहीं"

#: ../clients/cli/connections.c:2354
#, fuzzy, c-format
msgid "device '%s' not compatible with connection '%s': "
msgstr "युक्ति '%s' '%s' के साथ संगत नहीं है"

#: ../clients/cli/connections.c:2387
#, c-format
msgid "device '%s' not compatible with connection '%s'"
msgstr "युक्ति '%s' '%s' के साथ संगत नहीं है"

#: ../clients/cli/connections.c:2390
#, c-format
msgid "no device found for connection '%s'"
msgstr "'%s' कनेक्शन के लिए कोई युक्ति नहीं मिला"

#: ../clients/cli/connections.c:2441
#, c-format
msgid "Hint: use '%s' to get more details."
msgstr ""

#: ../clients/cli/connections.c:2459
#, fuzzy, c-format
msgid "Connection successfully activated (%s) (D-Bus active path: %s)\n"
msgstr "कनेक्शन सफलतापूर्वक सक्रिय किया गया (डी बस सक्रिय पथ: %s)\n"

#: ../clients/cli/connections.c:2463 ../clients/cli/connections.c:2613
#: ../clients/cli/connections.c:6701
#, c-format
msgid "Connection successfully activated (D-Bus active path: %s)\n"
msgstr "कनेक्शन सफलतापूर्वक सक्रिय किया गया (डी बस सक्रिय पथ: %s)\n"

#: ../clients/cli/connections.c:2470 ../clients/cli/connections.c:2592
#, c-format
msgid "Error: Connection activation failed: %s"
msgstr "त्रुटि: कनेक्शन सक्रियकरण विफल: %s"

#: ../clients/cli/connections.c:2507
#, fuzzy, c-format
msgid "Error: Timeout expired (%d seconds)"
msgstr "त्रुटि: समय समाप्ति %d सेकेंड में समाप्त."

#: ../clients/cli/connections.c:2675
#, fuzzy, c-format
msgid "failed to read passwd-file '%s': %s"
msgstr "त्रुटि: '%s' मान हटाने में विफल: %s\n"

#: ../clients/cli/connections.c:2688
#, c-format
msgid "missing colon in 'password' entry '%s'"
msgstr ""

#: ../clients/cli/connections.c:2696
#, c-format
msgid "missing dot in 'password' entry '%s'"
msgstr ""

#: ../clients/cli/connections.c:2709
#, c-format
msgid "invalid setting name in 'password' entry '%s'"
msgstr ""

#: ../clients/cli/connections.c:2763
#, c-format
msgid "unknown device '%s'."
msgstr "अज्ञात युक्ति '%s'."

#: ../clients/cli/connections.c:2768
msgid "neither a valid connection nor device given"
msgstr "न तो वैध कनेक्शन न युक्ति प्रदत्त"

#: ../clients/cli/connections.c:2893 ../clients/cli/devices.c:1680
#: ../clients/cli/devices.c:3027 ../clients/cli/devices.c:3290
#: ../clients/cli/devices.c:3966
#, c-format
msgid "Unknown parameter: %s\n"
msgstr "अज्ञात पैरामीटर: %s\n"

#: ../clients/cli/connections.c:2918
msgid "preparing"
msgstr "तैयारी"

#: ../clients/cli/connections.c:3027
#, fuzzy, c-format
msgid "Connection '%s' (%s) successfully deleted.\n"
msgstr "'%s' (%s) कनेक्शन सफलतापूर्वक अद्यतन किया गया.\n"

#: ../clients/cli/connections.c:3043
#, fuzzy, c-format
msgid "Connection '%s' successfully deactivated (D-Bus active path: %s)\n"
msgstr "कनेक्शन सफलतापूर्वक सक्रिय किया गया (डी बस सक्रिय पथ: %s)\n"

#: ../clients/cli/connections.c:3094 ../clients/cli/connections.c:8599
#: ../clients/cli/connections.c:8630 ../clients/cli/connections.c:8788
#, c-format
msgid "Error: No connection specified."
msgstr "त्रुटि: कोई कनेक्शन निर्दिष्ट नहीं."

#: ../clients/cli/connections.c:3124
#, fuzzy, c-format
msgid "Error: '%s' is not an active connection.\n"
msgstr "त्रुटि:कोई '%s' सक्रिय कनेक्शन नहीं है."

#: ../clients/cli/connections.c:3125
#, fuzzy, c-format
msgid "Error: not all active connections found."
msgstr "त्रुटि:कोई '%s' सक्रिय कनेक्शन नहीं है."

#: ../clients/cli/connections.c:3133
#, fuzzy, c-format
msgid "Error: no active connection provided."
msgstr "त्रुटि: %s - कोई ऐसा कनेक्शन प्रोफ़ाइल नहीं."

#: ../clients/cli/connections.c:3164
#, fuzzy, c-format
msgid "Connection '%s' deactivation failed: %s\n"
msgstr "त्रुटि: कनेक्शन सक्रियकरण विफल: %s"

#: ../clients/cli/connections.c:3415 ../clients/cli/connections.c:3472
#: ../clients/common/nm-client-utils.c:225
#, c-format
msgid "'%s' not among [%s]"
msgstr "'%s' [%s] में से नहीं"

#. We should not really come here
#: ../clients/cli/connections.c:3435 ../clients/cli/connections.c:3495
#: ../clients/common/nm-client-utils.c:293
#, c-format
msgid "Unknown error"
msgstr "अज्ञात त्रुटि"

#: ../clients/cli/connections.c:3629
#, c-format
msgid "Warning: master='%s' doesn't refer to any existing profile.\n"
msgstr "चेतावनी: master='%s' मौजूदा प्रोफाइल का संदर्भ नहीं रखता है.\n"

#: ../clients/cli/connections.c:3984
#, c-format
msgid "Error: invalid property '%s': %s."
msgstr "त्रुटि: अवैध विशेषता '%s': %s."

#: ../clients/cli/connections.c:3998
#, fuzzy, c-format
msgid "Error: failed to %s %s.%s: %s."
msgstr "त्रुटि: %s.%s बदलने में विफल: %s."

#: ../clients/cli/connections.c:4033
#, fuzzy, c-format
msgid "Error: '%s' is mandatory."
msgstr "त्रुटि: '%s' सेटिंग उपस्थित नहीं है\n"

#: ../clients/cli/connections.c:4060
#, fuzzy, c-format
msgid "Error: invalid slave type; %s."
msgstr "त्रुटि: अवैध कनेक्शन किस्म; %s."

#: ../clients/cli/connections.c:4068
#, c-format
msgid "Error: invalid connection type; %s."
msgstr "त्रुटि: अवैध कनेक्शन किस्म; %s."

#: ../clients/cli/connections.c:4145
#, fuzzy, c-format
msgid "Error: bad connection type: %s"
msgstr "त्रुटि: अवैध कनेक्शन किस्म; %s."

#: ../clients/cli/connections.c:4191
#, fuzzy, c-format
msgid "Error: '%s': %s"
msgstr "त्रुटि: %s: %s."

#: ../clients/cli/connections.c:4212
#, fuzzy
msgid "Error: master is required"
msgstr "त्रुटि: 'master' जरूरी है."

#: ../clients/cli/connections.c:4271
#, fuzzy, c-format
msgid "Error: error adding bond option '%s=%s'."
msgstr "त्रुटि: अज्ञात कनेक्शन: '%s'."

#: ../clients/cli/connections.c:4302
#, c-format
msgid "Error: '%s' is not a valid monitoring mode; use '%s' or '%s'.\n"
msgstr "त्रुटि: '%s' एक वैध मॉनिटरिंग अवस्था नहीं है; '%s' या '%s' का उपयोग करें.\n"

#: ../clients/cli/connections.c:4333
#, fuzzy, c-format
msgid "Error: 'bt-type': '%s' not valid; use [%s, %s, %s (%s), %s]."
msgstr "त्रुटि: 'bt-type': '%s' वैध नहीं है; [%s, %s (%s), %s] उपयोग करें."

#: ../clients/cli/connections.c:4582
#, c-format
msgid "Error: value for '%s' is missing."
msgstr "त्रुटि: '%s' मान अनुपस्थित है."

#: ../clients/cli/connections.c:4628
msgid "Error: <setting>.<property> argument is missing."
msgstr "त्रुटि: <setting>.<property> वितर्क अनुपस्थित है."

#: ../clients/cli/connections.c:4651
#, c-format
msgid "Error: invalid or not allowed setting '%s': %s."
msgstr "त्रुटि: अवैध या अनुमतिप्राप्त सेटिंग नहीं '%s': %s."

#: ../clients/cli/connections.c:4699 ../clients/cli/connections.c:4715
#, fuzzy, c-format
msgid "Error: '%s' is ambiguous (%s.%s or %s.%s)."
msgstr "'%s' दुविधापूर्ण है (%s x %s)"

#: ../clients/cli/connections.c:4733
#, c-format
msgid "Error: invalid <setting>.<property> '%s'."
msgstr "त्रुटि: अवैध <setting>.<property> '%s'."

#: ../clients/cli/connections.c:4777 ../clients/cli/connections.c:8431
#, fuzzy, c-format
msgid "Error: Failed to add '%s' connection: %s"
msgstr "त्रुटि: '%s' कनेक्शन को जोड़ने में विफल : (%d) %s"

#: ../clients/cli/connections.c:4795
#, c-format
msgid ""
"Warning: There is another connection with the name '%1$s'. Reference the "
"connection by its uuid '%2$s'\n"
msgid_plural ""
"Warning: There are %3$u other connections with the name '%1$s'. Reference "
"the connection by its uuid '%2$s'\n"
msgstr[0] ""
msgstr[1] ""

#: ../clients/cli/connections.c:4804
#, c-format
msgid "Connection '%s' (%s) successfully added.\n"
msgstr "'%s' (%s) कनेक्शन सफलतापूर्वक जोड़ा गया.\n"

#: ../clients/cli/connections.c:4857 ../clients/cli/connections.c:6824
#: ../clients/cli/connections.c:6825 ../clients/cli/devices.c:529
#: ../clients/cli/devices.c:536 ../clients/cli/devices.c:1201
#: ../clients/cli/general.c:137 ../clients/cli/utils.h:296
#: ../clients/common/nm-client-utils.c:283
#: ../clients/common/nm-meta-setting-desc.c:871
#: ../clients/common/nm-meta-setting-desc.c:2662
msgid "no"
msgstr "नहीं"

#: ../clients/cli/connections.c:4858 ../clients/cli/connections.c:6824
#: ../clients/cli/connections.c:6825 ../clients/cli/devices.c:528
#: ../clients/cli/devices.c:535 ../clients/cli/devices.c:1201
#: ../clients/cli/general.c:136 ../clients/cli/utils.h:296
#: ../clients/common/nm-client-utils.c:282
#: ../clients/common/nm-meta-setting-desc.c:871
#: ../clients/common/nm-meta-setting-desc.c:2659
msgid "yes"
msgstr "हाँ"

#: ../clients/cli/connections.c:4944
#, c-format
msgid ""
"You can specify this option more than once. Press <Enter> when you're done.\n"
msgstr ""

#. Ask for optional arguments.
#: ../clients/cli/connections.c:5046
#, fuzzy, c-format
msgid "There is %d optional setting for %s.\n"
msgid_plural "There are %d optional settings for %s.\n"
msgstr[0] "%d वैकल्पिक वितर्क हैं '%s' कनेक्शन प्रकार के लिए.\n"
msgstr[1] "%d वैकल्पिक वितर्क हैं '%s' कनेक्शन प्रकार के लिए.\n"

#: ../clients/cli/connections.c:5052
#, c-format
msgid "Do you want to provide it? %s"
msgid_plural "Do you want to provide them? %s"
msgstr[0] "क्या आप इसे प्रदान करना चाहते हैं? %s"
msgstr[1] "क्या आप इसे प्रदान करना चाहते हैं? %s"

#: ../clients/cli/connections.c:5185 ../clients/cli/utils.c:293
#, c-format
msgid "Error: value for '%s' argument is required."
msgstr "त्रुटि: '%s' वितर्क के लिए मान जरूरी है."

#: ../clients/cli/connections.c:5192
#, c-format
msgid "Error: 'save': %s."
msgstr "त्रुटि: 'सहेजें': %s."

#: ../clients/cli/connections.c:5278 ../clients/cli/connections.c:5289
#, fuzzy, c-format
msgid "Error: '%s' argument is required."
msgstr "त्रुटि: 'type' वितर्क जरूरी है."

#: ../clients/cli/connections.c:6254
#, c-format
msgid "['%s' setting values]\n"
msgstr "['%s' सेटिंग मान]\n"

#. TRANSLATORS: do not translate command names and keywords before ::
#. *              However, you should translate terms enclosed in <>.
#.
#: ../clients/cli/connections.c:6363
#, fuzzy, c-format
msgid ""
"---[ Main menu ]---\n"
"goto     [<setting> | <prop>]        :: go to a setting or property\n"
"remove   <setting>[.<prop>] | <prop> :: remove setting or reset property "
"value\n"
"set      [<setting>.<prop> <value>]  :: set property value\n"
"describe [<setting>.<prop>]          :: describe property\n"
"print    [all | <setting>[.<prop>]]  :: print the connection\n"
"verify   [all | fix]                 :: verify the connection\n"
"save     [persistent|temporary]      :: save the connection\n"
"activate [<ifname>] [/<ap>|<nsp>]    :: activate the connection\n"
"back                                 :: go one level up (back)\n"
"help/?   [<command>]                 :: print this help\n"
"nmcli    <conf-option> <value>       :: nmcli configuration\n"
"quit                                 :: exit nmcli\n"
msgstr ""
"---[ Main menu ]---\n"
"goto     [<setting> | <prop>]        :: go to a setting or property\n"
"remove   <setting>[.<prop>] | <prop> :: remove setting or reset property "
"value\n"
"set      [<setting>.<prop> <value>]  :: set property value\n"
"describe [<setting>.<prop>]          :: describe property\n"
"print    [all | <setting>[.<prop>]]  :: print the connection\n"
"verify   [all]                       :: verify the connection\n"
"save     [persistent|temporary]      :: save the connection\n"
"activate [<ifname>] [/<ap>|<nsp>]    :: activate the connection\n"
"back                                 :: go one level up (back)\n"
"help/?   [<command>]                 :: print this help\n"
"nmcli    <conf-option> <value>       :: nmcli configuration\n"
"quit                                 :: exit nmcli\n"

#: ../clients/cli/connections.c:6390
#, c-format
msgid ""
"goto <setting>[.<prop>] | <prop>  :: enter setting/property for editing\n"
"\n"
"This command enters into a setting or property for editing it.\n"
"\n"
"Examples: nmcli> goto connection\n"
"          nmcli connection> goto secondaries\n"
"          nmcli> goto ipv4.addresses\n"
msgstr ""
"goto <setting>[.<prop>] | <prop>  :: enter setting/property for editing\n"
"\n"
"This command enters into a setting or property for editing it.\n"
"\n"
"Examples: nmcli> goto connection\n"
"          nmcli connection> goto secondaries\n"
"          nmcli> goto ipv4.addresses\n"

#: ../clients/cli/connections.c:6397
#, c-format
msgid ""
"remove <setting>[.<prop>]  :: remove setting or reset property value\n"
"\n"
"This command removes an entire setting from the connection, or if a "
"property\n"
"is given, resets that property to the default value.\n"
"\n"
"Examples: nmcli> remove wifi-sec\n"
"          nmcli> remove eth.mtu\n"
msgstr ""
"remove <setting>[.<prop>]  :: remove setting or reset property value\n"
"\n"
"This command removes an entire setting from the connection, or if a "
"property\n"
"is given, resets that property to the default value.\n"
"\n"
"Examples: nmcli> remove wifi-sec\n"
"          nmcli> remove eth.mtu\n"

#: ../clients/cli/connections.c:6404
#, c-format
msgid ""
"set [<setting>.<prop> <value>]  :: set property value\n"
"\n"
"This command sets property value.\n"
"\n"
"Example: nmcli> set con.id My connection\n"
msgstr ""
"set [<setting>.<prop> <value>]  :: set property value\n"
"\n"
"This command sets property value.\n"
"\n"
"Example: nmcli> set con.id My connection\n"

#: ../clients/cli/connections.c:6409
#, c-format
msgid ""
"describe [<setting>.<prop>]  :: describe property\n"
"\n"
"Shows property description. You can consult nm-settings(5) manual page to "
"see all NM settings and properties.\n"
msgstr ""
"describe [<setting>.<prop>]  :: describe property\n"
"\n"
"Shows property description. You can consult nm-settings(5) manual page to "
"see all NM settings and properties.\n"

#: ../clients/cli/connections.c:6414
#, c-format
msgid ""
"print [all]  :: print setting or connection values\n"
"\n"
"Shows current property or the whole connection.\n"
"\n"
"Example: nmcli ipv4> print all\n"
msgstr ""
"print [all]  :: print setting or connection values\n"
"\n"
"Shows current property or the whole connection.\n"
"\n"
"Example: nmcli ipv4> print all\n"

#: ../clients/cli/connections.c:6419
#, fuzzy, c-format
msgid ""
"verify [all | fix]  :: verify setting or connection validity\n"
"\n"
"Verifies whether the setting or connection is valid and can be saved later.\n"
"It indicates invalid values on error. Some errors may be fixed "
"automatically\n"
"by 'fix' option.\n"
"\n"
"Examples: nmcli> verify\n"
"          nmcli> verify fix\n"
"          nmcli bond> verify\n"
msgstr ""
"verify [all]  :: verify setting or connection validity\n"
"\n"
"Verifies whether the setting or connection is valid and can be saved later. "
"It indicates invalid values on error.\n"
"\n"
"Examples: nmcli> verify\n"
"          nmcli bond> verify\n"

#: ../clients/cli/connections.c:6428
#, c-format
msgid ""
"save [persistent|temporary]  :: save the connection\n"
"\n"
"Sends the connection profile to NetworkManager that either will save it\n"
"persistently, or will only keep it in memory. 'save' without an argument\n"
"means 'save persistent'.\n"
"Note that once you save the profile persistently those settings are saved\n"
"across reboot or restart. Subsequent changes can also be temporary or\n"
"persistent, but any temporary changes will not persist across reboot or\n"
"restart. If you want to fully remove the persistent connection, the "
"connection\n"
"profile must be deleted.\n"
msgstr ""
"save [persistent|temporary]  :: save the connection\n"
"\n"
"Sends the connection profile to NetworkManager that either will save it\n"
"persistently, or will only keep it in memory. 'save' without an argument\n"
"means 'save persistent'.\n"
"Note that once you save the profile persistently those settings are saved\n"
"across reboot or restart. Subsequent changes can also be temporary or\n"
"persistent, but any temporary changes will not persist across reboot or\n"
"restart. If you want to fully remove the persistent connection, the "
"connection\n"
"profile must be deleted.\n"

#: ../clients/cli/connections.c:6439
#, c-format
msgid ""
"activate [<ifname>] [/<ap>|<nsp>]  :: activate the connection\n"
"\n"
"Activates the connection.\n"
"\n"
"Available options:\n"
"<ifname>    - device the connection will be activated on\n"
"/<ap>|<nsp> - AP (Wi-Fi) or NSP (WiMAX) (prepend with / when <ifname> is not "
"specified)\n"
msgstr ""
"activate [<ifname>] [/<ap>|<nsp>]  :: activate the connection\n"
"\n"
"Activates the connection.\n"
"\n"
"Available options:\n"
"<ifname>    - device the connection will be activated on\n"
"/<ap>|<nsp> - AP (Wi-Fi) or NSP (WiMAX) (prepend with / when <ifname> is not "
"specified)\n"

#: ../clients/cli/connections.c:6446 ../clients/cli/connections.c:6604
#, c-format
msgid ""
"back  :: go to upper menu level\n"
"\n"
msgstr ""
"back  :: मेन्यू स्तर पर जाएँ\n"
"\n"

#: ../clients/cli/connections.c:6449
#, c-format
msgid ""
"help/? [<command>]  :: help for the nmcli commands\n"
"\n"
msgstr ""
"help/? [<command>]  :: help for the nmcli commands\n"
"\n"

#: ../clients/cli/connections.c:6452
#, fuzzy, c-format
msgid ""
"nmcli [<conf-option> <value>]  :: nmcli configuration\n"
"\n"
"Configures nmcli. The following options are available:\n"
"status-line yes | no          [default: no]\n"
"save-confirmation yes | no    [default: yes]\n"
"show-secrets yes | no         [default: no]\n"
"prompt-color <color> | <0-8>  [default: 0]\n"
"%s\n"
"Examples: nmcli> nmcli status-line yes\n"
"          nmcli> nmcli save-confirmation no\n"
"          nmcli> nmcli prompt-color 3\n"
msgstr ""
"nmcli [<conf-option> <value>]  :: nmcli configuration\n"
"\n"
"Configures nmcli. The following options are available:\n"
"status-line yes | no        [default: no]\n"
"save-confirmation yes | no  [default: yes]\n"
"prompt-color <0-8>          [default: 0]\n"
"%s\n"
"Examples: nmcli> nmcli status-line yes\n"
"          nmcli> nmcli save-confirmation no\n"
"          nmcli> nmcli prompt-color 3\n"

#: ../clients/cli/connections.c:6474 ../clients/cli/connections.c:6610
#, c-format
msgid ""
"quit  :: exit nmcli\n"
"\n"
"This command exits nmcli. When the connection being edited is not saved, the "
"user is asked to confirm the action.\n"
msgstr ""
"quit  :: exit nmcli\n"
"\n"
"This command exits nmcli. When the connection being edited is not saved, the "
"user is asked to confirm the action.\n"

#: ../clients/cli/connections.c:6479 ../clients/cli/connections.c:6615
#: ../clients/cli/connections.c:7024 ../clients/cli/connections.c:8011
#, c-format
msgid "Unknown command: '%s'\n"
msgstr "अज्ञात कमांड: '%s'\n"

#. TRANSLATORS: do not translate command names and keywords before ::
#. *              However, you should translate terms enclosed in <>.
#.
#: ../clients/cli/connections.c:6544
#, c-format
msgid ""
"---[ Property menu ]---\n"
"set      [<value>]               :: set new value\n"
"add      [<value>]               :: add new option to the property\n"
"change                           :: change current value\n"
"remove   [<index> | <option>]    :: delete the value\n"
"describe                         :: describe property\n"
"print    [setting | connection]  :: print property (setting/connection) "
"value(s)\n"
"back                             :: go to upper level\n"
"help/?   [<command>]             :: print this help or command description\n"
"quit                             :: exit nmcli\n"
msgstr ""
"---[ Property menu ]---\n"
"set      [<value>]               :: set new value\n"
"add      [<value>]               :: add new option to the property\n"
"change                           :: change current value\n"
"remove   [<index> | <option>]    :: delete the value\n"
"describe                         :: describe property\n"
"print    [setting | connection]  :: print property (setting/connection) "
"value(s)\n"
"back                             :: go to upper level\n"
"help/?   [<command>]             :: print this help or command description\n"
"quit                             :: exit nmcli\n"

#: ../clients/cli/connections.c:6569
#, c-format
msgid ""
"set [<value>]  :: set new value\n"
"\n"
"This command sets provided <value> to this property\n"
msgstr ""
"set [<value>]  :: set new value\n"
"\n"
"This command sets provided <value> to this property\n"

#: ../clients/cli/connections.c:6573
#, c-format
msgid ""
"add [<value>]  :: append new value to the property\n"
"\n"
"This command adds provided <value> to this property, if the property is of a "
"container type. For single-valued properties the property value is replaced "
"(same as 'set').\n"
msgstr ""
"add [<value>]  :: append new value to the property\n"
"\n"
"This command adds provided <value> to this property, if the property is of a "
"container type. For single-valued properties the property value is replaced "
"(same as 'set').\n"

#: ../clients/cli/connections.c:6579
#, c-format
msgid ""
"change  :: change current value\n"
"\n"
"Displays current value and allows editing it.\n"
msgstr ""
"change  :: change current value\n"
"\n"
"मौजूदा मान दिखाता है और इसे संपादन करने देता है.\n"

#: ../clients/cli/connections.c:6583
#, c-format
msgid ""
"remove [<value>|<index>|<option name>]  :: delete the value\n"
"\n"
"Removes the property value. For single-valued properties, this sets the\n"
"property back to its default value. For container-type properties, this "
"removes\n"
"all the values of that property, or you can specify an argument to remove "
"just\n"
"a single item or option. The argument is either a value or index of the item "
"to\n"
"remove, or an option name (for properties with named options).\n"
"\n"
"Examples: nmcli ipv4.dns> remove 8.8.8.8\n"
"          nmcli ipv4.dns> remove 2\n"
"          nmcli bond.options> remove downdelay\n"
"\n"
msgstr ""
"remove [<value>|<index>|<option name>]  :: delete the value\n"
"\n"
"Removes the property value. For single-valued properties, this sets the\n"
"property back to its default value. For container-type properties, this "
"removes\n"
"all the values of that property, or you can specify an argument to remove "
"just\n"
"a single item or option. The argument is either a value or index of the item "
"to\n"
"remove, or an option name (for properties with named options).\n"
"\n"
"Examples: nmcli ipv4.dns> remove 8.8.8.8\n"
"          nmcli ipv4.dns> remove 2\n"
"          nmcli bond.options> remove downdelay\n"
"\n"

#: ../clients/cli/connections.c:6594
#, c-format
msgid ""
"describe  :: describe property\n"
"\n"
"Shows property description. You can consult nm-settings(5) manual page to "
"see all NM settings and properties.\n"
msgstr ""
"describe  :: describe property\n"
"\n"
"Shows property description. You can consult nm-settings(5) manual page to "
"see all NM settings and properties.\n"

#: ../clients/cli/connections.c:6599
#, c-format
msgid ""
"print [property|setting|connection]  :: print property (setting, connection) "
"value(s)\n"
"\n"
"Shows property value. Providing an argument you can also display values for "
"the whole setting or connection.\n"
msgstr ""
"print [property|setting|connection]  :: print property (setting, connection) "
"value(s)\n"
"\n"
"Shows property value. Providing an argument you can also display values for "
"the whole setting or connection.\n"

#: ../clients/cli/connections.c:6607
#, c-format
msgid ""
"help/? [<command>]  :: help for nmcli commands\n"
"\n"
msgstr ""
"help/? [<command>]  :: help for nmcli commands\n"
"\n"

#: ../clients/cli/connections.c:6707
#, c-format
msgid "Error: Connection activation failed.\n"
msgstr "त्रुटि: कनेक्शन सक्रिय किया जाना विफल.\n"

#: ../clients/cli/connections.c:6804
#, c-format
msgid "Error: setting '%s' is mandatory and cannot be removed.\n"
msgstr "त्रुटि: '%s' सेटिंग अनिवार्य है और हटाया नहीं जा सकता है.\n"

#. TRANSLATORS: status line in nmcli connection editor
#: ../clients/cli/connections.c:6822
#, c-format
msgid "[ Type: %s | Name: %s | UUID: %s | Dirty: %s | Temp: %s ]\n"
msgstr "[ Type: %s | Name: %s | UUID: %s | Dirty: %s | Temp: %s ]\n"

#: ../clients/cli/connections.c:6858
#, c-format
msgid "The connection is not saved. Do you really want to quit? %s"
msgstr "कनेक्शन सहेजा नहीं है. क्या आप सचमुच बाहर होना चाहते हैं? %s"

#: ../clients/cli/connections.c:6899
#, c-format
msgid ""
"The connection profile has been removed from another client. You may type "
"'save' in the main menu to restore it.\n"
msgstr ""
"दूसरे क्लायंट से कनेक्शन प्रोफ़ाइल हटाया गया है. आप प्रधान मेन्यू में 'सहेजें' को इसे जमा करने के "
"लिए टाइप कर सकते हैं.\n"

#: ../clients/cli/connections.c:6933 ../clients/cli/connections.c:7323
#: ../clients/cli/connections.c:7382
#, c-format
msgid "Allowed values for '%s' property: %s\n"
msgstr "'%s' विशेषता के लिए अनुमतिप्राप्त मान: %s\n"

#: ../clients/cli/connections.c:6937 ../clients/cli/connections.c:7327
#: ../clients/cli/connections.c:7386
#, c-format
msgid "Enter '%s' value: "
msgstr "'%s' मान दें:"

#: ../clients/cli/connections.c:6951 ../clients/cli/connections.c:6964
#: ../clients/cli/connections.c:7331 ../clients/cli/connections.c:7397
#, c-format
msgid "Error: failed to set '%s' property: %s\n"
msgstr "त्रुटि: '%s' गुण सेट करने में विफल: %s\n"

#: ../clients/cli/connections.c:6960
#, c-format
msgid "Edit '%s' value: "
msgstr "'%s' मान संपादित करें: "

#: ../clients/cli/connections.c:6978 ../clients/cli/settings.c:414
#, c-format
msgid "Error: %s\n"
msgstr "त्रुटि: %s\n"

#: ../clients/cli/connections.c:6997
#, c-format
msgid "Unknown command argument: '%s'\n"
msgstr "अज्ञात कमांड वितर्क: '%s'\n"

#: ../clients/cli/connections.c:7088
#, c-format
msgid "Available settings: %s\n"
msgstr "उपलब्ध सेटिंग्स: %s\n"

#: ../clients/cli/connections.c:7100
#, c-format
msgid "Error: invalid setting name; %s\n"
msgstr "त्रुटि: अवैध सेटिंग नाम; %s\n"

#: ../clients/cli/connections.c:7118
#, c-format
msgid "Available properties: %s\n"
msgstr "उपलब्ध विशेषता: %s\n"

#: ../clients/cli/connections.c:7126
#, c-format
msgid "Error: property %s\n"
msgstr "त्रुटि: विशेषता %s\n"

#: ../clients/cli/connections.c:7171
#, c-format
msgid ""
"Saving the connection with 'autoconnect=yes'. That might result in an "
"immediate activation of the connection.\n"
"Do you still want to save? %s"
msgstr ""
"कनेक्शन को 'autoconnect=yes' से सहेजें. वह कनेक्शन के तत्काल सक्रियकरण का परिणाम देगा.\n"
"क्या आप अभी भी सहेजना चाहते हैं? %s"

#: ../clients/cli/connections.c:7257
#, c-format
msgid "You may edit the following settings: %s\n"
msgstr "आप निम्नलिखित सेटिंग्स संपादित कर सकते हैं: %s\n"

#: ../clients/cli/connections.c:7288
#, c-format
msgid ""
"The connection profile has been removed from another client. You may type "
"'save' to restore it.\n"
msgstr ""
"दूसरे क्लायंट से कनेक्शन प्रोफ़ाइल हटाया गया है. आप 'सहेजें' को इसे जमा करने के लिए टाइप कर "
"सकते हैं.\n"

#: ../clients/cli/connections.c:7335 ../clients/cli/connections.c:7589
#: ../clients/cli/connections.c:7621
#, c-format
msgid "Error: no setting selected; valid are [%s]\n"
msgstr "त्रुटि: कोई सेटिंग चयनित नहीं; मान [%s] हैं\n"

#: ../clients/cli/connections.c:7336
#, c-format
msgid "use 'goto <setting>' first, or 'set <setting>.<property>'\n"
msgstr "'goto <setting>' का उपयोग पहले करें, या 'set <setting>.<property>'\n"

#: ../clients/cli/connections.c:7351 ../clients/cli/connections.c:7521
#: ../clients/cli/connections.c:7611
#, c-format
msgid "Error: invalid setting argument '%s'; valid are [%s]\n"
msgstr "त्रुटि: अवैध सेटिंग वितर्क '%s'; मान हैं [%s]\n"

#: ../clients/cli/connections.c:7360
#, c-format
msgid "Error: missing setting for '%s' property\n"
msgstr "त्रुटि: '%s' गुण के लिए अनुपस्थित सेटिंग\n"

#: ../clients/cli/connections.c:7367
#, c-format
msgid "Error: invalid property: %s\n"
msgstr "त्रुटि: अवैध मान: %s\n"

#: ../clients/cli/connections.c:7429
#, c-format
msgid "Error: unknown setting '%s'\n"
msgstr "त्रुटि: अज्ञात सेटिंग '%s'\n"

#: ../clients/cli/connections.c:7454
#, c-format
msgid "You may edit the following properties: %s\n"
msgstr "आप निम्नलिखित विशेषता संपादित कर सकते हैं: %s\n"

#: ../clients/cli/connections.c:7494 ../clients/cli/connections.c:7544
#, c-format
msgid "Error: failed to remove value of '%s': %s\n"
msgstr "त्रुटि: '%s' मान हटाने में विफल: %s\n"

#: ../clients/cli/connections.c:7499
#, c-format
msgid "Error: no argument given; valid are [%s]\n"
msgstr "त्रुटि: कोई वितर्क नहीं दिया हुआ; मान हैं [%s]\n"

#: ../clients/cli/connections.c:7518
#, c-format
msgid "Setting '%s' is not present in the connection.\n"
msgstr "'%s' सेटिंग इस कनेक्शन में उपस्थित नहीं है.\n"

#: ../clients/cli/connections.c:7565
#, c-format
msgid "Error: %s properties, nor it is a setting name.\n"
msgstr "त्रुटि: %s विशेषताएँ, न ही यह सेटिंग नाम है.\n"

#: ../clients/cli/connections.c:7590 ../clients/cli/connections.c:7622
#, c-format
msgid "use 'goto <setting>' first, or 'describe <setting>.<property>'\n"
msgstr "'goto <setting>' पहले उपयोग करें, या 'describe <setting>.<property>'\n"

#: ../clients/cli/connections.c:7645
#, c-format
msgid "Error: invalid property: %s, neither a valid setting name.\n"
msgstr "त्रुटि: अवैध विशेषता: %s, न ही वैध सेटिंग नाम है.\n"

#: ../clients/cli/connections.c:7675
#, c-format
msgid "Error: unknown setting: '%s'\n"
msgstr "त्रुटि: अज्ञात सेटिंग: '%s'\n"

#: ../clients/cli/connections.c:7680
#, c-format
msgid "Error: '%s' setting not present in the connection\n"
msgstr "त्रुटि: %s' सेटिंग इस कनेक्शन में उपस्थित नहीं है.\n"

#: ../clients/cli/connections.c:7711
#, c-format
msgid "Error: invalid property: %s%s\n"
msgstr "त्रुटि: अवैध मान: %s%s\n"

#: ../clients/cli/connections.c:7713
msgid ", neither a valid setting name"
msgstr ", न ही वैध सेटिंग नाम है"

#: ../clients/cli/connections.c:7729
#, fuzzy, c-format
msgid "Invalid verify option: %s\n"
msgstr "अवैध विकल्प '%s'"

#: ../clients/cli/connections.c:7737
#, c-format
msgid "Verify setting '%s': %s\n"
msgstr "'%s' सेटिंग जाँचें: %s\n"

#: ../clients/cli/connections.c:7752
#, c-format
msgid "Verify connection: %s\n"
msgstr "कनेक्शन जाँचें: %s\n"

#: ../clients/cli/connections.c:7755
#, c-format
msgid "The error cannot be fixed automatically.\n"
msgstr ""

#: ../clients/cli/connections.c:7776
#, c-format
msgid "Error: invalid argument '%s'\n"
msgstr "त्रुटि: अवैध वितर्क '%s'.\n"

#: ../clients/cli/connections.c:7830
#, fuzzy, c-format
msgid "Error: Failed to save '%s' (%s) connection: %s\n"
msgstr "त्रुटि: '%s' (%s) कनेक्शन को सहेजने में विफल : (%d) %s\n"

#: ../clients/cli/connections.c:7836
#, fuzzy, c-format
msgid "Error: Timeout saving '%s' (%s) connection\n"
msgstr "त्रुटि: '%s' (%s) कनेक्शन को सहेजने में विफल : (%d) %s\n"

#: ../clients/cli/connections.c:7841
#, c-format
msgid "Connection '%s' (%s) successfully saved.\n"
msgstr "'%s' (%s) कनेक्शन सफलतापूर्वक सहेजा गया\n"

#: ../clients/cli/connections.c:7842
#, c-format
msgid "Connection '%s' (%s) successfully updated.\n"
msgstr "'%s' (%s) कनेक्शन सफलतापूर्वक अद्यतन किया गया.\n"

#: ../clients/cli/connections.c:7875
#, c-format
msgid "Error: connection verification failed: %s\n"
msgstr "त्रुटि: कनेक्शन जाँच विफलता: %s\n"

#: ../clients/cli/connections.c:7876
msgid "(unknown error)"
msgstr "(अज्ञात त्रुटि)"

#: ../clients/cli/connections.c:7877
#, c-format
msgid "You may try running 'verify fix' to fix errors.\n"
msgstr ""

#: ../clients/cli/connections.c:7899
#, c-format
msgid "Error: connection is not saved. Type 'save' first.\n"
msgstr "त्रुटि: कनेक्शन नहीं सहेजा गया. 'सहेजें' पहले टाइप करें.\n"

#: ../clients/cli/connections.c:7903
#, c-format
msgid "Error: connection is not valid: %s\n"
msgstr "त्रुटि: कनेक्शन वैध नहीं है: %s\n"

#: ../clients/cli/connections.c:7913
#, c-format
msgid "Error: Cannot activate connection: %s.\n"
msgstr "त्रुटि: कनेक्शन सक्रिय नहीं कर सकता है: %s.\n"

#: ../clients/cli/connections.c:7922
#, fuzzy, c-format
msgid "Error: Failed to activate '%s' (%s) connection: %s\n"
msgstr "त्रुटि:  '%s' (%s) कनेक्शन को सक्रिय करने में विफल : (%d) %s\n"

#: ../clients/cli/connections.c:7929
msgid "Monitoring connection activation (press any key to continue)\n"
msgstr "कनेक्शन सक्रियकरण (जारी रखने के लिए दबाएँ) मॉनिटरिंग\n"

#: ../clients/cli/connections.c:7965
#, c-format
msgid "Error: status-line: %s\n"
msgstr "त्रुटि: status-line: %s\n"

#: ../clients/cli/connections.c:7973
#, c-format
msgid "Error: save-confirmation: %s\n"
msgstr "त्रुटि: save-confirmation: %s\n"

#: ../clients/cli/connections.c:7981
#, fuzzy, c-format
msgid "Error: show-secrets: %s\n"
msgstr "त्रुटि: 'सक्रिय दिखाएँ': %s"

#: ../clients/cli/connections.c:7988
#, c-format
msgid "Current nmcli configuration:\n"
msgstr "मौजूदा nmcli विन्यास:\n"

#: ../clients/cli/connections.c:7996
#, c-format
msgid "Invalid configuration option '%s'; allowed [%s]\n"
msgstr "अवैध विन्यास विकल्प '%s'; अनुमतिप्राप्त [%s]\n"

#: ../clients/cli/connections.c:8217
#, fuzzy, c-format
msgid "Error: only one of 'id', 'filename', uuid, or 'path' can be provided."
msgstr "त्रुटि: 'id', uuid, या 'path' का केवल एक दिया जा सकता है."

#: ../clients/cli/connections.c:8231 ../clients/cli/connections.c:8392
#, c-format
msgid "Error: Unknown connection '%s'."
msgstr "त्रुटि: अज्ञात कनेक्शन: '%s'."

#: ../clients/cli/connections.c:8247
#, c-format
msgid "Warning: editing existing connection '%s'; 'type' argument is ignored\n"
msgstr "चेतावनी: मौजूदा कनेक्शन '%s' का संपादन; 'type' वितर्क अनदेखा है\n"

#: ../clients/cli/connections.c:8250
#, c-format
msgid ""
"Warning: editing existing connection '%s'; 'con-name' argument is ignored\n"
msgstr "चेतावनी: मौजूदा कनेक्शन '%s' का संपादन; 'con-name' वितर्क अनदेखा है\n"

#: ../clients/cli/connections.c:8277
#, c-format
msgid "Valid connection types: %s\n"
msgstr "वैध कनेक्शन प्रकार: %s\n"

#: ../clients/cli/connections.c:8279
#, c-format
msgid "Error: invalid connection type; %s\n"
msgstr "त्रुटि: अवैध कनेक्शन किस्म; %s\n"

#: ../clients/cli/connections.c:8315
#, c-format
msgid "===| nmcli interactive connection editor |==="
msgstr "===| nmcli interactive connection editor |==="

#: ../clients/cli/connections.c:8318
#, c-format
msgid "Editing existing '%s' connection: '%s'"
msgstr "मौजूदा '%s' कनेक्शन का संपादन: '%s'"

#: ../clients/cli/connections.c:8320
#, c-format
msgid "Adding a new '%s' connection"
msgstr "नया '%s' कनेक्शन जोड़ रहा है"

#: ../clients/cli/connections.c:8322
#, c-format
msgid "Type 'help' or '?' for available commands."
msgstr "'help' या '?' उपलब्ध कमांड के लिए टाइप करें."

#: ../clients/cli/connections.c:8324
#, c-format
msgid "Type 'print' to show all the connection properties."
msgstr ""

#: ../clients/cli/connections.c:8326
#, c-format
msgid "Type 'describe [<setting>.<prop>]' for detailed property description."
msgstr "'describe [<setting>.<prop>]' टाइप करें विस्तृत विशेषता विवरण के लिए."

#: ../clients/cli/connections.c:8354
#, fuzzy, c-format
msgid "Error: Failed to modify connection '%s': %s"
msgstr "त्रुटि: '%s' कनेक्शन रूपांतरण के लिए विफल: (%d) %s"

#: ../clients/cli/connections.c:8360
#, c-format
msgid "Connection '%s' (%s) successfully modified.\n"
msgstr "'%s' (%s) कनेक्शन सफलतापूर्वक बदला गया\n"

#: ../clients/cli/connections.c:8436
#, c-format
msgid "%s (%s) cloned as %s (%s).\n"
msgstr ""

#: ../clients/cli/connections.c:8502
#, fuzzy
msgid "New connection name: "
msgstr "नया कनेक्शन"

#: ../clients/cli/connections.c:8504
#, fuzzy, c-format
msgid "Error: <new name> argument is missing."
msgstr "त्रुटि: %s तर्क अनुपस्थित है."

#: ../clients/cli/connections.c:8509 ../clients/cli/connections.c:9005
#, fuzzy, c-format
msgid "Error: unknown extra argument: '%s'."
msgstr "त्रुटि: अवैध 'अतिरिक्त वितर्क '%s'."

#: ../clients/cli/connections.c:8554
#, fuzzy, c-format
msgid "Error: not all connections deleted."
msgstr "त्रुटि: कोई कनेक्शन निर्दिष्ट नहीं."

#: ../clients/cli/connections.c:8555
#, fuzzy, c-format
msgid "Error: Connection deletion failed: %s\n"
msgstr "त्रुटि: कनेक्शन विलोपन विफल: %s"

#: ../clients/cli/connections.c:8611 ../clients/cli/connections.c:8732
#, fuzzy, c-format
msgid "Error: %s.\n"
msgstr "त्रुटि: %s."

#: ../clients/cli/connections.c:8612 ../clients/cli/connections.c:8733
#, fuzzy, c-format
msgid "Error: not all connections found."
msgstr "त्रुटि: '%s' एक वैध कनेक्शन कमांड नहीं है."

#. truncate trailing ", "
#: ../clients/cli/connections.c:8663
#, c-format
msgid "Error: cannot delete unknown connection(s): %s."
msgstr "त्रुटि: अज्ञात कनेक्शन मिटा नहीं सकता है: %s."

#: ../clients/cli/connections.c:8673
#, fuzzy, c-format
msgid "%s: connection profile changed\n"
msgstr "कनेक्शन्स प्रोफ़ाइल विवरण"

#: ../clients/cli/connections.c:8699
#, fuzzy, c-format
msgid "%s: connection profile created\n"
msgstr "कनेक्शन्स प्रोफ़ाइल विवरण"

#: ../clients/cli/connections.c:8708
#, fuzzy, c-format
msgid "%s: connection profile removed\n"
msgstr "कनेक्शन हटाया गया था"

#: ../clients/cli/connections.c:8770
#, fuzzy, c-format
msgid "Error: failed to reload connections: %s."
msgstr "त्रुटि: '%s' कनेक्शन को जोड़ने में विफल : (%d) %s"

#: ../clients/cli/connections.c:8803
#, fuzzy, c-format
msgid "Error: failed to load connection: %s."
msgstr "त्रुटि: '%s' कनेक्शन को जोड़ने में विफल : (%d) %s"

#: ../clients/cli/connections.c:8811
#, c-format
msgid "Could not load file '%s'\n"
msgstr "'%s' फ़ाइल को लोड नही कर सका\n"

#: ../clients/cli/connections.c:8818
#, fuzzy
msgid "File to import: "
msgstr "गोपित करने में विफल: %d."

#: ../clients/cli/connections.c:8852
#, c-format
msgid "Error: No arguments provided."
msgstr "त्रुटि: कोई वितर्क नहीं दिया गया."

#: ../clients/cli/connections.c:8883
#, c-format
msgid "Warning: 'type' already specified, ignoring extra one.\n"
msgstr ""

#: ../clients/cli/connections.c:8897
#, c-format
msgid "Warning: 'file' already specified, ignoring extra one.\n"
msgstr ""

#: ../clients/cli/connections.c:8899
#, fuzzy, c-format
msgid "Unknown parameter: %s"
msgstr "अज्ञात पैरामीटर: %s\n"

#: ../clients/cli/connections.c:8910
#, c-format
msgid "Error: 'type' argument is required."
msgstr "त्रुटि: 'type' वितर्क जरूरी है."

#: ../clients/cli/connections.c:8914
#, fuzzy, c-format
msgid "Error: 'file' argument is required."
msgstr "त्रुटि: 'ifname' वितर्क जरूरी है."

#: ../clients/cli/connections.c:8923
#, fuzzy, c-format
msgid "Error: failed to find VPN plugin for %s."
msgstr "त्रुटि: %s.%s बदलने में विफल: %s."

#: ../clients/cli/connections.c:8930 ../clients/cli/connections.c:9026
#, fuzzy, c-format
msgid "Error: failed to load VPN plugin: %s."
msgstr "त्रुटि: %s.%s बदलने में विफल: %s."

#: ../clients/cli/connections.c:8939
#, fuzzy, c-format
msgid "Error: failed to import '%s': %s."
msgstr "त्रुटि: %s.%s बदलने में विफल: %s."

#: ../clients/cli/connections.c:9012
#, fuzzy
msgid "Output file name: "
msgstr "फाइलनाम"

#: ../clients/cli/connections.c:9017
#, fuzzy, c-format
msgid "Error: the connection is not VPN."
msgstr "त्रुटि: कनेक्शन वैध नहीं है: %s\n"

#: ../clients/cli/connections.c:9039
#, fuzzy, c-format
msgid "Error: failed to create temporary file %s."
msgstr "अस्थायी फ़ाइल नहीं बना सका: %s"

#: ../clients/cli/connections.c:9047
#, fuzzy, c-format
msgid "Error: failed to export '%s': %s."
msgstr "त्रुटि: '%s' गुण सेट करने में विफल: %s\n"

#: ../clients/cli/connections.c:9059
#, fuzzy, c-format
msgid "Error: failed to read temporary file '%s': %s."
msgstr "त्रुटि: '%s' मान हटाने में विफल: %s\n"

#. define some prompts
#: ../clients/cli/devices.c:37
msgid "Interface: "
msgstr "अंतरफलक:"

#: ../clients/cli/devices.c:38
#, fuzzy
msgid "Interface(s): "
msgstr "अंतरफलक:"

#: ../clients/cli/devices.c:73 ../clients/cli/devices.c:1229
msgid "(none)"
msgstr "(कोई नहीं)"

#: ../clients/cli/devices.c:178 ../clients/cli/devices.c:185
msgid "(unknown)"
msgstr "(अज्ञात)"

#: ../clients/cli/devices.c:333
#, c-format
msgid "<invisible> | %s"
msgstr ""

#: ../clients/cli/devices.c:334
msgid "<invisible>"
msgstr ""

#: ../clients/cli/devices.c:435
#, c-format
msgid "%u Mb/s"
msgstr "%u Mb/s"

#: ../clients/cli/devices.c:689
#, fuzzy, c-format
msgid ""
"Usage: nmcli device { COMMAND | help }\n"
"\n"
"COMMAND := { status | show | set | connect | reapply | modify | disconnect | "
"delete | monitor | wifi | lldp }\n"
"\n"
"  status\n"
"\n"
"  show [<ifname>]\n"
"\n"
"  set [ifname] <ifname> [autoconnect yes|no] [managed yes|no]\n"
"\n"
"  connect <ifname>\n"
"\n"
"  reapply <ifname>\n"
"\n"
"  modify <ifname> ([+|-]<setting>.<property> <value>)+\n"
"\n"
"  disconnect <ifname> ...\n"
"\n"
"  delete <ifname> ...\n"
"\n"
"  monitor <ifname> ...\n"
"\n"
"  wifi [list [ifname <ifname>] [bssid <BSSID>] [--rescan yes|no|auto]]\n"
"\n"
"  wifi connect <(B)SSID> [password <password>] [wep-key-type key|phrase] "
"[ifname <ifname>]\n"
"                         [bssid <BSSID>] [name <name>] [private yes|no] "
"[hidden yes|no]\n"
"\n"
"  wifi hotspot [ifname <ifname>] [con-name <name>] [ssid <SSID>] [band a|bg] "
"[channel <channel>] [password <password>]\n"
"\n"
"  wifi rescan [ifname <ifname>] [[ssid <SSID to scan>] ...]\n"
"\n"
"  lldp [list [ifname <ifname>]]\n"
"\n"
msgstr ""
"प्रयोग: nmcli device { COMMAND | help }\n"
"\n"
"COMMAND := { status | show | connect | disconnect | delete | wifi | wimax }\n"
"\n"
"COMMAND := { status | show | connect | disconnect | delete | wifi }\n"
"\n"
"  status\n"
"\n"
"  show [<ifname>]\n"
"\n"
"  connect <ifname>\n"
"\n"
"  disconnect <ifname>\n"
"\n"
"  delete <ifname>\n"
"\n"
"  wifi [list [ifname <ifname>] [bssid <BSSID>]]\n"
"\n"
"  wifi connect <(B)SSID> [password <password>] [wep-key-type key|phrase] "
"[ifname <ifname>]\n"
"                         [bssid <BSSID>] [name <name>] [private yes|no]\n"
"\n"
"  wifi rescan [[ifname] <ifname>]\n"
"\n"
"  wimax [list [ifname <ifname>] [nsp <name>]]\n"
"\n"

#: ../clients/cli/devices.c:712
#, c-format
msgid ""
"Usage: nmcli device status { help }\n"
"\n"
"Show status for all devices.\n"
"By default, the following columns are shown:\n"
" DEVICE     - interface name\n"
" TYPE       - device type\n"
" STATE      - device state\n"
" CONNECTION - connection activated on device (if any)\n"
"Displayed columns can be changed using '--fields' global option. 'status' "
"is\n"
"the default command, which means 'nmcli device' calls 'nmcli device "
"status'.\n"
"\n"
msgstr ""
"प्रयोग: nmcli device status { help }\n"
"\n"
"सभी युक्ति के लिए स्थिति दिखाएँ.\n"
"तयशुदा रूप से, निम्नलिखित स्तंभ दिखाए गए हैं:\n"
" DEVICE     - interface name\n"
" TYPE       - device type\n"
" STATE      - device state\n"
" CONNECTION - युक्ति पर कनेक्शन सक्रिय (यदि कोई है)\n"
"प्रदर्शित स्तंभ को  '--fields' वैश्विक विकल्प के उपयोग से बदला जा सकता है. 'status'\n"
"तयशुदा कमांड है, जिसका अर्थ है कि 'nmcli device' 'nmcli device status' को कॉल "
"करता है.\n"
"\n"

#: ../clients/cli/devices.c:727
#, c-format
msgid ""
"Usage: nmcli device show { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<ifname>]\n"
"\n"
"Show details of device(s).\n"
"The command lists details for all devices, or for a given device.\n"
"\n"
msgstr ""
"प्रयोग: nmcli device show { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<ifname>]\n"
"\n"
"युक्तियों के विवरण दिखाएँ.\n"
"सभी युक्तियों के लिए कमांड नीचे के विवरण सूचीबद्ध करता है, या फिर दी गए युक्ति के लिए.\n"
"\n"

#: ../clients/cli/devices.c:738
#, c-format
msgid ""
"Usage: nmcli device connect { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname>\n"
"\n"
"Connect the device.\n"
"NetworkManager will try to find a suitable connection that will be "
"activated.\n"
"It will also consider connections that are not set to auto-connect.\n"
"\n"
msgstr ""
"प्रयोग: nmcli device connect { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname>\n"
"\n"
"युक्ति को कनेक्ट करें.\n"
"NetworkManager किसी उपयुक्त कनेक्शन को ढूँढ़ने की कोशिश करेगा जो सक्रिय किया जाएगा.\n"
"यह कनेक्शन को देखेगा जो स्वतः कनेक्ट पर स्वचालित रूप से सेट नहीं है.\n"
"\n"

#: ../clients/cli/devices.c:750
#, fuzzy, c-format
msgid ""
"Usage: nmcli device reapply { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname>\n"
"\n"
"Attempts to update device with changes to the currently active connection\n"
"made since it was last applied.\n"
"\n"
msgstr ""
"प्रयोग: nmcli device disconnect { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname>\n"
"\n"
"युक्ति को डिसकनेक्ट करें.\n"
"यह कमांड युक्ति को डिसकनेक्ट करता है और इसे स्वतः सक्रियण से रोकता है\n"
"बिना उपयोक्ता/दस्ती रोकटोक के.\n"
"\n"

#: ../clients/cli/devices.c:761
#, fuzzy, c-format
msgid ""
"Usage: nmcli device modify { ARGUMENTS | --help }\n"
"\n"
"ARGUMENTS := <ifname> ([+|-]<setting>.<property> <value>)+\n"
"\n"
"Modify one or more properties currently active on the device without "
"modifying\n"
"the connection profile. The changes have immediate effect. For multi-valued\n"
"properties you can use optional '+' or '-' prefix to the property name.\n"
"The '+' sign allows appending items instead of overwriting the whole value.\n"
"The '-' sign allows removing selected items instead of the whole value.\n"
"\n"
"Examples:\n"
"nmcli dev mod em1 ipv4.method manual ipv4.addr \"192.168.1.2/24, "
"10.10.1.5/8\"\n"
"nmcli dev mod em1 +ipv4.dns 8.8.4.4\n"
"nmcli dev mod em1 -ipv4.dns 1\n"
"nmcli dev mod em1 -ipv6.addr \"abbe::cafe/56\"\n"
msgstr ""
"प्रयोग: nmcli connection modify { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> ([+|-]<setting>.<property> <value>)+\n"
"\n"
"Modify one or more properties of the connection profile.\n"
"The profile is identified by its name, UUID or D-Bus path. For multi-valued\n"
"properties you can use optional '+' or '-' prefix to the property name.\n"
"The '+' sign allows appending items instead of overwriting the whole value.\n"
"The '-' sign allows removing selected items instead of the whole value.\n"
"\n"
"Examples:\n"
"nmcli con mod home-wifi wifi.ssid rakosnicek\n"
"nmcli con mod em1-1 ipv4.method manual ipv4.addr \"192.168.1.2/24, "
"10.10.1.5/8\"\n"
"nmcli con mod em1-1 +ipv4.dns 8.8.4.4\n"
"nmcli con mod em1-1 -ipv4.dns 1\n"
"nmcli con mod em1-1 -ipv6.addr \"abbe::cafe/56\"\n"
"nmcli con mod bond0 +bond.options mii=500\n"
"nmcli con mod bond0 -bond.options downdelay\n"
"\n"

#: ../clients/cli/devices.c:781
#, fuzzy, c-format
msgid ""
"Usage: nmcli device disconnect { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname> ...\n"
"\n"
"Disconnect devices.\n"
"The command disconnects the device and prevents it from auto-activating\n"
"further connections without user/manual intervention.\n"
"\n"
msgstr ""
"प्रयोग: nmcli device disconnect { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname>\n"
"\n"
"युक्ति को डिसकनेक्ट करें.\n"
"यह कमांड युक्ति को डिसकनेक्ट करता है और इसे स्वतः सक्रियण से रोकता है\n"
"बिना उपयोक्ता/दस्ती रोकटोक के.\n"
"\n"

#: ../clients/cli/devices.c:793
#, fuzzy, c-format
msgid ""
"Usage: nmcli device delete { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname> ...\n"
"\n"
"Delete the software devices.\n"
"The command removes the interfaces. It only works for software devices\n"
"(like bonds, bridges, etc.). Hardware devices cannot be deleted by the\n"
"command.\n"
"\n"
msgstr ""
"प्रयोग: nmcli device delete { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname>\n"
"\n"
"Deletes the software device.\n"
"The command removes the interface. It only works for software devices\n"
"(like bonds, bridges, etc.). Hardware devices cannot be deleted by the\n"
"command.\n"
"\n"

#: ../clients/cli/devices.c:806
#, c-format
msgid ""
"Usage: nmcli device set { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := DEVICE { PROPERTY [ PROPERTY ... ] }\n"
"DEVICE    := [ifname] <ifname> \n"
"PROPERTY  := { autoconnect { yes | no } |\n"
"             { managed { yes | no }\n"
"\n"
"Modify device properties.\n"
"\n"
msgstr ""

#: ../clients/cli/devices.c:819
#, fuzzy, c-format
msgid ""
"Usage: nmcli device monitor { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<ifname>] ...\n"
"\n"
"Monitor device activity.\n"
"This command prints a line whenever the specified devices change state.\n"
"Monitors all devices in case no interface is specified.\n"
"\n"
msgstr ""
"प्रयोग: nmcli device show { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<ifname>]\n"
"\n"
"युक्तियों के विवरण दिखाएँ.\n"
"सभी युक्तियों के लिए कमांड नीचे के विवरण सूचीबद्ध करता है, या फिर दी गए युक्ति के लिए.\n"
"\n"

#: ../clients/cli/devices.c:831
#, fuzzy, c-format
msgid ""
"Usage: nmcli device wifi { ARGUMENTS | help }\n"
"\n"
"Perform operation on Wi-Fi devices.\n"
"\n"
"ARGUMENTS := [list [ifname <ifname>] [bssid <BSSID>] [--rescan yes|no|"
"auto]]\n"
"\n"
"List available Wi-Fi access points. The 'ifname' and 'bssid' options can be\n"
"used to list APs for a particular interface, or with a specific BSSID. The\n"
"--rescan flag tells whether a new Wi-Fi scan should be triggered.\n"
"\n"
"ARGUMENTS := connect <(B)SSID> [password <password>] [wep-key-type key|"
"phrase] [ifname <ifname>]\n"
"                     [bssid <BSSID>] [name <name>] [private yes|no] [hidden "
"yes|no]\n"
"\n"
"Connect to a Wi-Fi network specified by SSID or BSSID. The command finds a\n"
"matching connection or creates one and then activates it on a device. This\n"
"is a command-line counterpart of clicking an SSID in a GUI client. If a\n"
"connection for the network already exists, it is possible to bring up the\n"
"existing profile as follows: nmcli con up id <name>. Note that only open,\n"
"WEP and WPA-PSK networks are supported if no previous connection exists.\n"
"It is also assumed that IP configuration is obtained via DHCP.\n"
"\n"
"ARGUMENTS := hotspot [ifname <ifname>] [con-name <name>] [ssid <SSID>]\n"
"                     [band a|bg] [channel <channel>] [password <password>]\n"
"\n"
"Create a Wi-Fi hotspot. Use 'connection down' or 'device disconnect'\n"
"to stop the hotspot.\n"
"Parameters of the hotspot can be influenced by the optional parameters:\n"
"ifname - Wi-Fi device to use\n"
"con-name - name of the created hotspot connection profile\n"
"ssid - SSID of the hotspot\n"
"band - Wi-Fi band to use\n"
"channel - Wi-Fi channel to use\n"
"password - password to use for the hotspot\n"
"\n"
"ARGUMENTS := rescan [ifname <ifname>] [[ssid <SSID to scan>] ...]\n"
"\n"
"Request that NetworkManager immediately re-scan for available access "
"points.\n"
"NetworkManager scans Wi-Fi networks periodically, but in some cases it "
"might\n"
"be useful to start scanning manually. 'ssid' allows scanning for a specific\n"
"SSID, which is useful for APs with hidden SSIDs. More 'ssid' parameters can "
"be\n"
"given. Note that this command does not show the APs,\n"
"use 'nmcli device wifi list' for that.\n"
"\n"
msgstr ""
"प्रयोग: nmcli device wifi { ARGUMENTS | help }\n"
"\n"
"वाई-फ़ाई युक्ति पर संचालन करें.\n"
"\n"
"ARGUMENTS := [list [ifname <ifname>] [bssid <BSSID>]]\n"
"\n"
"उपलब्ध वाई-फ़ाई पहुँच बिंदु सूचीबद्ध करें. 'ifname' और 'bssid' विकल्प को\n"
"APs को खास अंतरफलक के लिए सूचीबद्ध करने के लिए प्रयोग किया जाता है या किसी विशेष "
"BSSID से.\n"
"\n"
"ARGUMENTS := connect <(B)SSID> [password <password>] [wep-key-type key|"
"phrase] [ifname <ifname>]\n"
"                    [bssid <BSSID>] [name <name>] [private yes|no]\n"
"\n"
"वाई-फ़ाई संजाल से SSID या BSSID द्वारा निर्दिष्ट से कनेक्ट करें. यह कमांड\n"
"एक नया कनेक्शन बनाता है और इसे किसी युक्ति पर सक्रिय करता है. यह एक कमांड लाइन\n"
"क्लिक करने काउंटरपार्ट है  किसी जीयूआई क्लायंट में. यह कमांड हमेशा\n"
"किसी नए कनेक्शन को बनाता है और इस प्रकार यह मुख्य रूप से नए वाई-फ़ाइल \n"
"संजाल कनेक्शन के लिए उपयोगी है. यदि संजाल के लिए कनेक्शन पहले से मौजूद है, तो यह बेहतर\n"
"है कि मौजूदा प्रोफ़ाइल को निम्नानुसार लाया जाए: nmcli con up id <name>. नोट करें कि\n"
"केवल खुला, WEP और WPA-PSK संजाल अभी समर्थित हैं. यह मानकर\n"
"चला जाता है कि IP विन्यास DHCP से होकर प्राप्त किया जाता है.\n"
"\n"
"ARGUMENTS := rescan [[ifname] <ifname>]\n"
"\n"
"निवेदन है कि संजाल प्रबंधक तत्काल उपलब्ध पहुँच बिंदु को फिर से स्कैन करता है.\n"
"NetworkManager Wi-Fi संजाल को समय समय पर जाँचता है लेकिन समान स्थिति में यह \n"
"उपयोगी हो सकता है कि इसे दस्ती रूप से स्कैन किया जाए. नोट करें कि यह कमांड \n"
"AP को नहीं दिखाता है, 'nmcli device wifi list' को इसके लिए देखें.\n"
"\n"

#: ../clients/cli/devices.c:878
#, fuzzy, c-format
msgid ""
"Usage: nmcli device lldp { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [list [ifname <ifname>]]\n"
"\n"
"List neighboring devices discovered through LLDP. The 'ifname' option can "
"be\n"
"used to list neighbors for a particular interface.\n"
"\n"
msgstr ""
"प्रयोग: nmcli device wimax { ARGUMENTS | help }\n"
"\n"
"WiMAX युक्ति पर संचालन करें.\n"
"\n"
"ARGUMENTS := [list [ifname <ifname>] [nsp <name>]]\n"
"\n"
"उपलब्ध WiMAX NSP को सूचीबद्ध करें. 'ifname' और 'nsp' विकल्प को \n"
"संजाल सूची को सूचीबद्ध करने के लिए किसी खास अंतरफलक के लिए प्रयोग किया जा सकता है, या "
"किसी विशेष NSP के साथ.\n"
"\n"

#: ../clients/cli/devices.c:976
#, c-format
msgid "Error: No interface specified."
msgstr "त्रुटि:  कोई अंतरफलक निर्दिष्ट नहीं."

#: ../clients/cli/devices.c:999
#, c-format
msgid "Warning: argument '%s' is duplicated.\n"
msgstr ""

#: ../clients/cli/devices.c:1002
#, fuzzy, c-format
msgid "Error: Device '%s' not found.\n"
msgstr "त्रुटि: युक्ति '%s' नहीं मिला."

#: ../clients/cli/devices.c:1003
#, fuzzy, c-format
msgid "Error: not all devices found."
msgstr "त्रुटि: कोई Wi-Fi युक्ति नहीं मिला."

#: ../clients/cli/devices.c:1034
#, fuzzy
msgid "No interface specified"
msgstr "त्रुटि:  कोई अंतरफलक निर्दिष्ट नहीं."

#: ../clients/cli/devices.c:1053
#, fuzzy, c-format
msgid "Device '%s' not found"
msgstr "त्रुटि: युक्ति '%s' नहीं मिला."

#: ../clients/cli/devices.c:1149
#, c-format
msgid "%u MHz"
msgstr "%u MHz"

#: ../clients/cli/devices.c:1150
#, c-format
msgid "%u Mbit/s"
msgstr "%u Mbit/s"

#: ../clients/cli/devices.c:1189
msgid "Ad-Hoc"
msgstr "Ad-Hoc"

#: ../clients/cli/devices.c:1190
msgid "Infra"
msgstr "Infra"

#: ../clients/cli/devices.c:1191
msgid "N/A"
msgstr "N/A"

#: ../clients/cli/devices.c:1386
msgid "Device details"
msgstr "युक्ति विवरण"

#: ../clients/cli/devices.c:1397
#, c-format
msgid "Error: 'device show': %s"
msgstr "त्रुटि: 'युक्ति प्रदर्शन': %s"

#: ../clients/cli/devices.c:1695
msgid "Status of devices"
msgstr "युक्ति की स्थिति"

#: ../clients/cli/devices.c:1699
#, c-format
msgid "Error: 'device status': %s"
msgstr "त्रुटि: 'युक्ति स्थिति': %s"

#: ../clients/cli/devices.c:1726 ../clients/cli/devices.c:2167
#: ../clients/cli/devices.c:4141
#, c-format
msgid "Error: invalid extra argument '%s'."
msgstr "त्रुटि: अवैध 'अतिरिक्त वितर्क '%s'."

#: ../clients/cli/devices.c:1762 ../clients/cli/general.c:519
#, c-format
msgid "Error: Timeout %d sec expired."
msgstr "त्रुटि: समय समाप्ति %d सेकेंड में समाप्त."

#: ../clients/cli/devices.c:1811
#, c-format
msgid "Device '%s' successfully activated with '%s'.\n"
msgstr "युक्ति '%s' सफलतापूर्वक सक्रिय '%s' के साथ.\n"

#: ../clients/cli/devices.c:1817
#, fuzzy, c-format
msgid "Error: Connection activation failed: (%d) %s.\n"
msgstr "त्रुटि: कनेक्शन सक्रियकरण विफल: (%d) %s."

#: ../clients/cli/devices.c:1856
#, fuzzy, c-format
msgid "Error: Failed to setup a Wi-Fi hotspot: %s"
msgstr "त्रुटि: मेजबाननाम सेट करने में विफल: (%d) %s"

#: ../clients/cli/devices.c:1859
#, fuzzy, c-format
msgid "Error: Failed to add/activate new connection: %s"
msgstr "त्रुटि: नया कनेक्शन को जोड़ने के लिए / सक्रिय करने में विफल : (%d) %s"

#: ../clients/cli/devices.c:1862
#, fuzzy, c-format
msgid "Error: Failed to activate connection: %s"
msgstr "त्रुटि: नया कनेक्शन को जोड़ने के लिए / सक्रिय करने में विफल : (%d) %s"

#: ../clients/cli/devices.c:1932
#, c-format
msgid "Error: Device activation failed: %s"
msgstr "त्रुटि: युक्ति सक्रियकरण विफल: %s"

#: ../clients/cli/devices.c:1941
#, c-format
msgid "Error: Device activation failed: device was disconnected"
msgstr "त्रुटि: युक्ति सक्रियकरण विफल: युक्ति डिसकनेक्टेड"

#: ../clients/cli/devices.c:1994
#, c-format
msgid "Error: extra argument not allowed: '%s'."
msgstr "त्रुटि: अतिरिक्त वितर्क नहीं अनुमतिप्राप्त: '%s'."

#: ../clients/cli/devices.c:2067 ../clients/cli/devices.c:2082
#: ../clients/cli/devices.c:2319
#, fuzzy, c-format
msgid "Device '%s' successfully disconnected.\n"
msgstr "सफल: युक्ति '%s' सफलतापूर्वक डिसकनेक्डेड."

#: ../clients/cli/devices.c:2070 ../clients/cli/devices.c:2393
#, fuzzy, c-format
msgid "Device '%s' successfully removed.\n"
msgstr "युक्ति '%s' सफलतापूर्वक सक्रिय '%s' के साथ.\n"

#: ../clients/cli/devices.c:2132 ../clients/cli/devices.c:2202
#, fuzzy, c-format
msgid "Error: Reapplying connection to device '%s' (%s) failed: %s"
msgstr "त्रुटि: युक्ति '%s' (%s) मिटाना विफल: %s"

#: ../clients/cli/devices.c:2142 ../clients/cli/devices.c:2211
#, fuzzy, c-format
msgid "Connection successfully reapplied to device '%s'.\n"
msgstr "कनेक्शन सफलतापूर्वक सक्रिय किया गया (डी बस सक्रिय पथ: %s)\n"

#: ../clients/cli/devices.c:2236
#, fuzzy, c-format
msgid "Error: Reading applied connection from device '%s' (%s) failed: %s"
msgstr "त्रुटि: युक्ति '%s' (%s) मिटाना विफल: %s"

#: ../clients/cli/devices.c:2303
#, fuzzy, c-format
msgid "Error: not all devices disconnected."
msgstr "त्रुटि: युक्ति सक्रियकरण विफल: युक्ति डिसकनेक्टेड"

#: ../clients/cli/devices.c:2304
#, fuzzy, c-format
msgid "Error: Device '%s' (%s) disconnecting failed: %s\n"
msgstr "त्रुटि: युक्ति '%s' (%s) डिसकनेक्टिंग विफल: %s"

#: ../clients/cli/devices.c:2384
#, fuzzy, c-format
msgid "Error: not all devices deleted."
msgstr "त्रुटि: कोई Wi-Fi युक्ति नहीं मिला."

#: ../clients/cli/devices.c:2385
#, fuzzy, c-format
msgid "Error: Device '%s' (%s) deletion failed: %s\n"
msgstr "त्रुटि: युक्ति '%s' (%s) मिटाना विफल: %s"

#: ../clients/cli/devices.c:2467
#, fuzzy, c-format
msgid "Error: No property specified."
msgstr "त्रुटि: कोई कनेक्शन निर्दिष्ट नहीं."

#: ../clients/cli/devices.c:2482 ../clients/cli/devices.c:2499
#: ../clients/cli/general.c:692 ../clients/cli/general.c:704
#, c-format
msgid "Error: '%s' argument is missing."
msgstr "त्रुटि: '%s' तर्क अनुपस्थित है."

#: ../clients/cli/devices.c:2488
#, fuzzy, c-format
msgid "Error: 'managed': %s."
msgstr "त्रुटि: 'mode': %s."

#: ../clients/cli/devices.c:2505
#, c-format
msgid "Error: 'autoconnect': %s."
msgstr "त्रुटि: 'autoconnect': %s."

#: ../clients/cli/devices.c:2513 ../clients/cli/general.c:718
#, fuzzy, c-format
msgid "Error: property '%s' is not known."
msgstr "त्रुटि: अवैध विशेषता '%s': %s."

#: ../clients/cli/devices.c:2562
#, fuzzy, c-format
msgid "%s: using connection '%s'\n"
msgstr "कोई ऐसा कनेक्शन नहीं '%s'"

#: ../clients/cli/devices.c:2588
#, c-format
msgid "%s: device created\n"
msgstr ""

#: ../clients/cli/devices.c:2595
#, fuzzy, c-format
msgid "%s: device removed\n"
msgstr "उपकरण हटाया गया था"

#: ../clients/cli/devices.c:2775
msgid "Wi-Fi scan list"
msgstr "Wi-Fi स्कैन सूची"

#: ../clients/cli/devices.c:2862
#, c-format
msgid "Error: Access point with bssid '%s' not found."
msgstr "त्रुटि: पहुँच बिंदु के साथ bssid '%s' नहीं मिली."

#: ../clients/cli/devices.c:3018
#, c-format
msgid "Error: 'device wifi': %s"
msgstr "त्रुटि: 'युक्ति वाईफाई': %s"

#: ../clients/cli/devices.c:3036
#, fuzzy, c-format
msgid "Error: invalid rescan argument: '%s' not among [auto, no, yes]"
msgstr "त्रुटि: अवैध सेटिंग वितर्क '%s'; मान हैं [%s]\n"

#: ../clients/cli/devices.c:3043
#, c-format
msgid "Error: Device '%s' not found."
msgstr "त्रुटि: युक्ति '%s' नहीं मिला."

#: ../clients/cli/devices.c:3054
#, fuzzy, c-format
msgid ""
"Error: Device '%s' was not recognized as a Wi-Fi device, check "
"NetworkManager Wi-Fi plugin."
msgstr "त्रुटि: युक्ति '%s' एक Wi-Fi युक्ति नहीं है."

#: ../clients/cli/devices.c:3058 ../clients/cli/devices.c:3318
#: ../clients/cli/devices.c:3819 ../clients/cli/devices.c:3979
#, c-format
msgid "Error: Device '%s' is not a Wi-Fi device."
msgstr "त्रुटि: युक्ति '%s' एक Wi-Fi युक्ति नहीं है."

#: ../clients/cli/devices.c:3167
msgid "SSID or BSSID: "
msgstr "SSID या BSSID: "

#: ../clients/cli/devices.c:3172
#, c-format
msgid "Error: SSID or BSSID are missing."
msgstr "त्रुटि: SSID या BSSID अनुपस्थित है."

#: ../clients/cli/devices.c:3209
#, c-format
msgid "Error: bssid argument value '%s' is not a valid BSSID."
msgstr "त्रुटि: bssid तर्क मान '%s' एक वैध BSSID नहीं है."

#: ../clients/cli/devices.c:3239
#, c-format
msgid ""
"Error: wep-key-type argument value '%s' is invalid, use 'key' or 'phrase'."
msgstr "त्रुटि: wep कुंजी प्रकार के तर्क मान '%s' अमान्य है, 'कुंजी' या 'पद' का उपयोग करें."

#: ../clients/cli/devices.c:3266 ../clients/cli/devices.c:3284
#, c-format
msgid "Error: %s: %s."
msgstr "त्रुटि: %s: %s."

#: ../clients/cli/devices.c:3301
#, c-format
msgid "Error: BSSID to connect to (%s) differs from bssid argument (%s)."
msgstr "त्रुटि: BSSID (%s) से कनेक्ट करने के लिए  bssid तर्क (%s) से अलग है."

#: ../clients/cli/devices.c:3307
#, c-format
msgid "Error: Parameter '%s' is neither SSID nor BSSID."
msgstr "त्रुटि: पैरामीटर '%s' न तो SSID और न ही BSSID है."

#: ../clients/cli/devices.c:3320 ../clients/cli/devices.c:3821
#: ../clients/cli/devices.c:3981
#, c-format
msgid "Error: No Wi-Fi device found."
msgstr "त्रुटि: कोई Wi-Fi युक्ति नहीं मिला."

#: ../clients/cli/devices.c:3340
#, fuzzy, c-format
msgid "Error: Failed to scan hidden SSID: %s."
msgstr "त्रुटि: %s.%s बदलने में विफल: %s."

#: ../clients/cli/devices.c:3367
#, c-format
msgid "Error: No network with SSID '%s' found."
msgstr "त्रुटि: SSID '%s' के साथ कोई संजाल नहीं मिला."

#: ../clients/cli/devices.c:3369
#, c-format
msgid "Error: No access point with BSSID '%s' found."
msgstr "त्रुटि: SSID '%s' के साथ कोई पहुँच बिंदु नहीं मिला."

#: ../clients/cli/devices.c:3397
#, c-format
msgid "Error: Connection '%s' exists but properties don't match."
msgstr ""

#: ../clients/cli/devices.c:3440
#, c-format
msgid ""
"Warning: '%s' should be SSID for hidden APs; but it looks like a BSSID.\n"
msgstr ""

#: ../clients/cli/devices.c:3477
msgid "Password: "
msgstr "कूटशब्द:"

#: ../clients/cli/devices.c:3640
#, fuzzy, c-format
msgid "'%s' is not valid WPA PSK"
msgstr "'%s' वैध PSK नहीं है"

#: ../clients/cli/devices.c:3657
#, fuzzy, c-format
msgid "'%s' is not valid WEP key (it should be 5 or 13 ASCII chars)"
msgstr "'%s' लंबाई अवैध है (5 या 6 अंकों का होना चाहिए)"

#: ../clients/cli/devices.c:3673
#, c-format
msgid "Hotspot password: %s\n"
msgstr ""

#: ../clients/cli/devices.c:3744
#, fuzzy, c-format
msgid "Error: ssid is too long."
msgstr "त्रुटि: 'ssid' जरूरी है."

#: ../clients/cli/devices.c:3758
#, fuzzy, c-format
msgid "Error: band argument value '%s' is invalid; use 'a' or 'bg'."
msgstr "त्रुटि: wep कुंजी प्रकार के तर्क मान '%s' अमान्य है, 'कुंजी' या 'पद' का उपयोग करें."

#: ../clients/cli/devices.c:3783
#, fuzzy, c-format
msgid "Error: Unknown parameter %s."
msgstr "अज्ञात पैरामीटर: %s\n"

#: ../clients/cli/devices.c:3803
#, fuzzy, c-format
msgid "Error: channel requires band too."
msgstr "त्रुटि: 'apn' जरूरी है."

#: ../clients/cli/devices.c:3808
#, fuzzy, c-format
msgid "Error: channel '%s' not valid for band '%s'."
msgstr "त्रुटि: 'channel': '%s' वैध नहीं है; <1-13> उपयोग करें."

#: ../clients/cli/devices.c:3832
#, fuzzy, c-format
msgid "Error: Device '%s' supports neither AP nor Ad-Hoc mode."
msgstr "त्रुटि: युक्ति '%s' एक Wi-Fi युक्ति नहीं है."

#: ../clients/cli/devices.c:3866
#, fuzzy, c-format
msgid "Error: Invalid 'password': %s."
msgstr "त्रुटि: अवैध विशेषता '%s': %s."

#: ../clients/cli/devices.c:3942
#, fuzzy, c-format
msgid "Error: '%s' cannot repeat."
msgstr "त्रुटि: '%s' सेटिंग उपस्थित नहीं है\n"

#. Main header name
#: ../clients/cli/devices.c:4047
msgid "Device LLDP neighbors"
msgstr ""

#: ../clients/cli/devices.c:4157
#, fuzzy, c-format
msgid "Error: 'device lldp list': %s"
msgstr "त्रुटि: 'युक्ति स्थिति': %s"

#: ../clients/cli/general.c:41
msgid "asleep"
msgstr "asleep"

#: ../clients/cli/general.c:42
msgid "connecting"
msgstr "जुड़ रहा है"

#: ../clients/cli/general.c:43
msgid "connected (local only)"
msgstr " जुड़ा(केवल स्थानीय)"

#: ../clients/cli/general.c:44
msgid "connected (site only)"
msgstr "जुड़ा (केवल साइट)"

#: ../clients/cli/general.c:45 ../clients/common/nm-client-utils.c:274
msgid "connected"
msgstr "कनेक्टेड"

#: ../clients/cli/general.c:46
msgid "disconnecting"
msgstr "डिसकनेक्ट कर रहा है"

#: ../clients/cli/general.c:47 ../clients/common/nm-client-utils.c:267
msgid "disconnected"
msgstr "डिसकनेक्टेड"

#: ../clients/cli/general.c:138
msgid "auth"
msgstr "ऑथ"

#: ../clients/cli/general.c:166
msgid "running"
msgstr "कार्यशील"

#: ../clients/cli/general.c:180
msgid "starting"
msgstr "शुरू कर रहा है"

#: ../clients/cli/general.c:180
msgid "started"
msgstr "आरंभ किया"

#: ../clients/cli/general.c:214
msgid "enabled"
msgstr "सक्षम"

#: ../clients/cli/general.c:214
msgid "disabled"
msgstr "अक्षम"

#: ../clients/cli/general.c:332
#, c-format
msgid ""
"Usage: nmcli general { COMMAND | help }\n"
"\n"
"COMMAND := { status | hostname | permissions | logging }\n"
"\n"
"  status\n"
"\n"
"  hostname [<hostname>]\n"
"\n"
"  permissions\n"
"\n"
"  logging [level <log level>] [domains <log domains>]\n"
"\n"
msgstr ""
"प्रयोग: nmcli general { COMMAND | help }\n"
"\n"
"COMMAND := { status | hostname | permissions | logging }\n"
"\n"
"  status\n"
"\n"
"  hostname [<hostname>]\n"
"\n"
"  permissions\n"
"\n"
"  logging [level <log level>] [domains <log domains>]\n"
"\n"

#: ../clients/cli/general.c:343
#, c-format
msgid ""
"Usage: nmcli general status { help }\n"
"\n"
"Show overall status of NetworkManager.\n"
"'status' is the default action, which means 'nmcli gen' calls 'nmcli gen "
"status'\n"
"\n"
msgstr ""
"प्रयोग: nmcli general status { help }\n"
"\n"
"NetworkManager का स्थिति दिखाएँ.\n"
"'status' तयशुदा क्रिया है, जिसका अर्थ है कि 'nmcli gen' 'nmcli gen status' को कॉल "
"करता है\n"
"\n"

#: ../clients/cli/general.c:352
#, c-format
msgid ""
"Usage: nmcli general hostname { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<hostname>]\n"
"\n"
"Get or change persistent system hostname.\n"
"With no arguments, this prints currently configured hostname. When you pass\n"
"a hostname, NetworkManager will set it as the new persistent system "
"hostname.\n"
"\n"
msgstr ""
"प्रयोग: nmcli general hostname { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<hostname>]\n"
"\n"
"परसिस्टेंट तंत्र मेजबाननाम बदलें या पाएँ.\n"
"बिना किसी विर्तक के, यह मौजूदा रूप से विन्यस्त मेजबाननाम को छापता है. जब आप\n"
"मेजबाननाम पास करते हैं, NetworkManager इसे नया स्थिर तंत्र मेजबाननाम के रूप में सेट करता "
"है.\n"
"\n"

#: ../clients/cli/general.c:364
#, c-format
msgid ""
"Usage: nmcli general permissions { help }\n"
"\n"
"Show caller permissions for authenticated operations.\n"
"\n"
msgstr ""
"प्रयोग: nmcli general permissions { help }\n"
"\n"
"सत्यापित संचालन के लिए कॉलर अनुमति दिखाएँ.\n"
"\n"

#: ../clients/cli/general.c:372
#, c-format
msgid ""
"Usage: nmcli general logging { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [level <log level>] [domains <log domains>]\n"
"\n"
"Get or change NetworkManager logging level and domains.\n"
"Without any argument current logging level and domains are shown. In order "
"to\n"
"change logging state, provide level and/or domain. Please refer to the man "
"page\n"
"for the list of possible logging domains.\n"
"\n"
msgstr ""
"प्रयोग: nmcli general logging { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [level <log level>] [domains <log domains>]\n"
"\n"
"NetworkManager लॉगिंग लेवल और डोमेन पाएँ या बदलें.\n"
"बिना किसी वितर्क के, मौजूदा लॉगिंग और डोमेन दिखाए जाते हैं. लॉगिंग स्थिति बदलने\n"
"के लिएष स्तर और/या डोमेन बदलें. कृपया मैन पेज का संदर्भ लें\n"
"संभावित लॉगिंग डोमेन के लिए.\n"
"\n"

#: ../clients/cli/general.c:385
#, c-format
msgid ""
"Usage: nmcli networking { COMMAND | help }\n"
"\n"
"COMMAND := { [ on | off | connectivity ] }\n"
"\n"
"  on\n"
"\n"
"  off\n"
"\n"
"  connectivity [check]\n"
"\n"
msgstr ""
"प्रयोग: nmcli networking { COMMAND | help }\n"
"\n"
"COMMAND := { [ on | off | connectivity ] }\n"
"\n"
"  on\n"
"\n"
"  off\n"
"\n"
"  connectivity [check]\n"
"\n"

#: ../clients/cli/general.c:395
#, c-format
msgid ""
"Usage: nmcli networking on { help }\n"
"\n"
"Switch networking on.\n"
"\n"
msgstr ""
"प्रयोग: nmcli networking on { help }\n"
"\n"
"स्विच संजालन चालू.\n"
"\n"

#: ../clients/cli/general.c:403
#, c-format
msgid ""
"Usage: nmcli networking off { help }\n"
"\n"
"Switch networking off.\n"
"\n"
msgstr ""
"प्रयोग: nmcli networking off { help }\n"
"\n"
"स्विच संजालन चालू\n"
"\n"

#: ../clients/cli/general.c:411
#, c-format
msgid ""
"Usage: nmcli networking connectivity { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [check]\n"
"\n"
"Get network connectivity state.\n"
"The optional 'check' argument makes NetworkManager re-check the "
"connectivity.\n"
"\n"
msgstr ""
"प्रयोग: nmcli networking connectivity { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [check]\n"
"\n"
"संजाल कनेक्टिविटी स्थिति पाएँ.\n"
"वैकल्पिक 'check' वितर्क NetworkManager कनेक्टिविटी को फिर जाँच करने के लिए बनाता है.\n"
"\n"

#: ../clients/cli/general.c:423
#, fuzzy, c-format
msgid ""
"Usage: nmcli radio { COMMAND | help }\n"
"\n"
"COMMAND := { all | wifi | wwan }\n"
"\n"
"  all | wifi | wwan [ on | off ]\n"
"\n"
msgstr ""
"प्रयोग: nmcli radio { COMMAND | help }\n"
"\n"
"COMMAND := { all | wifi | wwan | wimax }\n"
"\n"
"  all | wifi | wwan | wimax [ on | off ]\n"
"\n"
"COMMAND := { all | wifi | wwan }\n"
"\n"
"  all | wifi | wwan [ on | off ]\n"
"\n"

#: ../clients/cli/general.c:432
#, c-format
msgid ""
"Usage: nmcli radio all { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of all radio switches, or turn them on/off.\n"
"\n"
msgstr ""
"प्रयोग: nmcli radio all { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"सभी रेडियो स्विच की स्थिति पाएँ, या उन्हें चालू/बंद करें.\n"
"\n"

#: ../clients/cli/general.c:442
#, c-format
msgid ""
"Usage: nmcli radio wifi { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of Wi-Fi radio switch, or turn it on/off.\n"
"\n"
msgstr ""
"प्रयोग: nmcli radio wifi { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"सभी वाई-फ़ाई रेडियो स्विच की स्थिति पाएँ, या उन्हें चालू/बंद करें.\n"
"\n"

#: ../clients/cli/general.c:452
#, c-format
msgid ""
"Usage: nmcli radio wwan { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of mobile broadband radio switch, or turn it on/off.\n"
"\n"
msgstr ""
"प्रयोग: nmcli radio wwan { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"सभी मोबाइल ब्राँडबैंड रेडियो स्विच की स्थिति पाएँ, या उन्हें चालू/बंद करें.\n"
"\n"

#: ../clients/cli/general.c:462
#, c-format
msgid ""
"Usage: nmcli monitor\n"
"\n"
"Monitor NetworkManager changes.\n"
"Prints a line whenever a change occurs in NetworkManager\n"
"\n"
msgstr ""

#: ../clients/cli/general.c:492
msgid "NetworkManager status"
msgstr "NetworkManager स्थिति"

#: ../clients/cli/general.c:496
#, c-format
msgid "Error: only these fields are allowed: %s"
msgstr "त्रुटि: केवल यह क्षेत्र ही अनुमति प्राप्त है: %s"

#: ../clients/cli/general.c:549
msgid "NetworkManager permissions"
msgstr "नेटवर्कप्रबंधक अनुमति"

#: ../clients/cli/general.c:553
#, c-format
msgid "Error: 'general permissions': %s"
msgstr "त्रुटि: 'सामान्य अनुमतियाँ': %s"

#: ../clients/cli/general.c:642
msgid "NetworkManager logging"
msgstr "नेटवर्कप्रबंधक लॉगिंग"

#: ../clients/cli/general.c:646
#, c-format
msgid "Error: 'general logging': %s"
msgstr "त्रुटि: 'सामान्य लॉगिंग': %s"

#: ../clients/cli/general.c:728
#, fuzzy, c-format
msgid "Error: failed to set logging: %s"
msgstr "त्रुटि: लॉगिंग सेट करने के लिए पहुँच मना; %s"

#: ../clients/cli/general.c:745
#, fuzzy, c-format
msgid "Error: failed to set hostname: %s"
msgstr "त्रुटि: मेजबाननाम सेट करने में विफल: (%d) %s"

#: ../clients/cli/general.c:814
#, c-format
msgid "Error: '--fields' value '%s' is not valid here (allowed field: %s)"
msgstr "त्रुटि: '--fields' मान '%s' यहाँ वैध नहीं है (अनुमति प्राप्त क्षेत्र हैं: %s)"

#: ../clients/cli/general.c:839
#, c-format
msgid "Error: invalid '%s' argument: '%s' (use on/off)."
msgstr "त्रुटि: अवैध '%s' वितर्क: '%s' (चालू/बंद का उपयोग करें)."

#. no arguments -> get current state
#: ../clients/cli/general.c:887 ../clients/cli/general.c:899
msgid "Connectivity"
msgstr "कनेक्टिविटी"

#: ../clients/cli/general.c:902
#, c-format
msgid "Error: 'networking' command '%s' is not valid."
msgstr "त्रुटि: 'संजालन' कमांड '%s' वैध नहीं है."

#: ../clients/cli/general.c:916
msgid "Networking"
msgstr "संजालन"

#. no argument, show all radio switches
#: ../clients/cli/general.c:951
msgid "Radio switches"
msgstr "रेडियो स्विचेस"

#. no argument, show current Wi-Fi state
#: ../clients/cli/general.c:981
msgid "Wi-Fi radio switch"
msgstr "Wi-Fi रेडियो स्विच"

#. no argument, show current WWAN (mobile broadband) state
#: ../clients/cli/general.c:1008
msgid "WWAN radio switch"
msgstr "WWAN रेडियो स्विच"

#: ../clients/cli/general.c:1056
#, fuzzy
msgid "NetworkManager has started"
msgstr "NetworkManager स्थिति"

#: ../clients/cli/general.c:1056
#, fuzzy
msgid "NetworkManager has stopped"
msgstr "NetworkManager स्थिति"

#: ../clients/cli/general.c:1067
#, fuzzy, c-format
msgid "Hostname set to '%s'\n"
msgstr "'%s' पर मेजबाननाम सेट करें"

#: ../clients/cli/general.c:1082
#, fuzzy, c-format
msgid "'%s' is now the primary connection\n"
msgstr "'%s' एक वैध कनेक्शन प्रोफ़ाइल नहीं है"

#: ../clients/cli/general.c:1084
#, fuzzy, c-format
msgid "There's no primary connection\n"
msgstr "टीम कनेक्शन"

#: ../clients/cli/general.c:1096
#, fuzzy, c-format
msgid "Connectivity is now '%s'\n"
msgstr "कनेक्टिविटी"

#: ../clients/cli/general.c:1110
#, fuzzy, c-format
msgid "Networkmanager is now in the '%s' state\n"
msgstr "नेटवर्कप्रबंधक कार्यशील नहीं है."

#: ../clients/cli/general.c:1130
#, fuzzy
msgid "connection available"
msgstr "कनेक्शन विफल"

#: ../clients/cli/general.c:1132
#, fuzzy
msgid "connections available"
msgstr "कनेक्शन विफल"

#: ../clients/cli/general.c:1150
#, fuzzy
msgid "autoconnect"
msgstr "कनेक्टेड"

#: ../clients/cli/general.c:1152
#, fuzzy
msgid "fw missing"
msgstr "गुण अनुपस्थित है"

#: ../clients/cli/general.c:1157
#, fuzzy
msgid "plugin missing"
msgstr "गुण अनुपस्थित है"

#: ../clients/cli/general.c:1162
msgid "sw"
msgstr ""

#: ../clients/cli/general.c:1164
#, fuzzy
msgid "hw"
msgstr "दिखाएँ"

#: ../clients/cli/general.c:1169
msgid "iface"
msgstr ""

#: ../clients/cli/general.c:1172
#, fuzzy
msgid "port"
msgstr "पोर्टल"

#: ../clients/cli/general.c:1175
msgid "mtu"
msgstr ""

#: ../clients/cli/general.c:1192
#, fuzzy
msgid "master"
msgstr "बांड मास्टर:"

#: ../clients/cli/general.c:1196 ../clients/tui/nm-editor-utils.c:239
#: ../clients/tui/nmt-connect-connection-list.c:407
msgid "VPN"
msgstr "VPN"

#: ../clients/cli/general.c:1198
#, fuzzy
msgid "ip4 default"
msgstr "तयशुदा"

#: ../clients/cli/general.c:1200
#, fuzzy
msgid "ip6 default"
msgstr "तयशुदा"

#: ../clients/cli/general.c:1282
#, fuzzy, c-format
msgid "%s VPN connection"
msgstr "VPN कनेक्शन"

#: ../clients/cli/general.c:1350
#, c-format
msgid ""
"Use \"nmcli device show\" to get complete information about known devices "
"and\n"
"\"nmcli connection show\" to get an overview on active connection profiles.\n"
"\n"
"Consult nmcli(1) and nmcli-examples(7) manual pages for complete usage "
"details.\n"
msgstr ""

#: ../clients/cli/general.c:1371
#, fuzzy, c-format
msgid "Error: 'monitor' command '%s' is not valid."
msgstr "त्रुटि: 'रेडियो' कमांड '%s' वैध नहीं है."

#: ../clients/cli/general.c:1383
#, fuzzy
msgid "Networkmanager is not running (waiting for it)\n"
msgstr "नेटवर्कप्रबंधक कार्यशील नहीं है."

#: ../clients/cli/nmcli.c:244
#, fuzzy, c-format
msgid ""
"Usage: nmcli [OPTIONS] OBJECT { COMMAND | help }\n"
"\n"
"OPTIONS\n"
"  -a, --ask                                ask for missing parameters\n"
"  -c, --colors auto|yes|no                 whether to use colors in output\n"
"  -e, --escape yes|no                      escape columns separators in "
"values\n"
"  -f, --fields <field,...>|all|common      specify fields to output\n"
"  -g, --get-values <field,...>|all|common  shortcut for -m tabular -t -f\n"
"  -h, --help                               print this help\n"
"  -m, --mode tabular|multiline             output mode\n"
"  -o, --overview                           overview mode\n"
"  -p, --pretty                             pretty output\n"
"  -s, --show-secrets                       allow displaying passwords\n"
"  -t, --terse                              terse output\n"
"  -v, --version                            show program version\n"
"  -w, --wait <seconds>                     set timeout waiting for finishing "
"operations\n"
"\n"
"OBJECT\n"
"  g[eneral]       NetworkManager's general status and operations\n"
"  n[etworking]    overall networking control\n"
"  r[adio]         NetworkManager radio switches\n"
"  c[onnection]    NetworkManager's connections\n"
"  d[evice]        devices managed by NetworkManager\n"
"  a[gent]         NetworkManager secret agent or polkit agent\n"
"  m[onitor]       monitor NetworkManager changes\n"
"\n"
msgstr ""
"प्रयोग: %s [OPTIONS] OBJECT { COMMAND | help }\n"
"\n"
"OPTIONS\n"
"  -t[erse]                                   terse output\n"
"  -p[retty]                                  pretty output\n"
"  -m[ode] tabular|multiline                  output mode\n"
"  -f[ields] <field1,field2,...>|all|common   specify fields to output\n"
"  -e[scape] yes|no                           escape columns separators in "
"values\n"
"  -a[sk]                                     ask for missing parameters\n"
"  -w[ait] <seconds>                          set timeout waiting for "
"finishing operations\n"
"  -v[ersion]                                 show program version\n"
"  -h[elp]                                    print this help\n"
"\n"
"OBJECT\n"
"  g[eneral]       NetworkManager's general status and operations\n"
"  n[etworking]    overall networking control\n"
"  r[adio]         NetworkManager radio switches\n"
"  c[onnection]    NetworkManager's connections\n"
"  d[evice]        devices managed by NetworkManager\n"
"\n"

#: ../clients/cli/nmcli.c:324
#, c-format
msgid "Error: missing argument for '%s' option."
msgstr "त्रुटि: '%s' विकल्प के लिए अनुपस्थित तर्क."

#: ../clients/cli/nmcli.c:625
#, c-format
msgid "Unexpected end of file following '%s'\n"
msgstr ""

#: ../clients/cli/nmcli.c:633
#, c-format
msgid "Expected whitespace following '%s'\n"
msgstr ""

#: ../clients/cli/nmcli.c:645
#, fuzzy, c-format
msgid "Expected a value for '%s'\n"
msgstr "'%s' '%s' के लिए वैध मान नहीं है"

#: ../clients/cli/nmcli.c:659
#, c-format
msgid "Expected a line break following '%s'\n"
msgstr ""

#: ../clients/cli/nmcli.c:748
#, c-format
msgid "Error: Option '--terse' is specified the second time."
msgstr "त्रुटि: विकल्प '--terse' ने दूसरी बार निर्दिष्ट किया है."

#: ../clients/cli/nmcli.c:753
#, c-format
msgid "Error: Option '--terse' is mutually exclusive with '--pretty'."
msgstr "त्रुटि: विकल्प '--terse' '--pretty' के साथ परस्पर वहिर्वेषी है."

#: ../clients/cli/nmcli.c:761
#, c-format
msgid "Error: Option '--pretty' is specified the second time."
msgstr "त्रुटि: विकल्प '--pretty' दूसरी बार निर्दिष्ट किया है."

#: ../clients/cli/nmcli.c:766
#, c-format
msgid "Error: Option '--pretty' is mutually exclusive with '--terse'."
msgstr "त्रुटि: विकल्प '--pretty' परस्पर वहिर्वेशी है '--terse' के साथ."

#: ../clients/cli/nmcli.c:781
#, c-format
msgid "Error: '%s' is not a valid argument for '%s' option."
msgstr ""

#: ../clients/cli/nmcli.c:795 ../clients/cli/nmcli.c:807
#, c-format
msgid "Error: '%s' is not valid argument for '%s' option."
msgstr "त्रुटि: '%s' '%s' विकल्प के लिए वैध तर्क नहीं है."

#: ../clients/cli/nmcli.c:831
#, c-format
msgid "Error: '%s' is not a valid timeout."
msgstr ""

#: ../clients/cli/nmcli.c:838
#, c-format
msgid "nmcli tool, version %s\n"
msgstr "nmcli टूल, संस्करण %s\n"

#: ../clients/cli/nmcli.c:846
#, c-format
msgid "Error: Option '%s' is unknown, try 'nmcli -help'."
msgstr "त्रुटि: विकल्प '%s' अज्ञात है, 'nmcli -help' आजमाएँ."

#: ../clients/cli/nmcli.c:902 ../clients/cli/nmcli.c:909
#, fuzzy, c-format
msgid "Error: nmcli terminated by signal %s (%d)"
msgstr ""
"\n"
"त्रुटि: nmcli की संकेत %s (%d) के द्वारा समाप्ति.\n"

#: ../clients/cli/nmcli.c:975
msgid "Success"
msgstr "सफल"

#: ../clients/cli/polkit-agent.c:68
#, fuzzy, c-format
msgid "Authentication message: %s\n"
msgstr "सत्यापन"

#: ../clients/cli/polkit-agent.c:76
#, fuzzy, c-format
msgid "Authentication error: %s\n"
msgstr "सत्यापन"

#: ../clients/cli/polkit-agent.c:136
#, fuzzy, c-format
msgid "Warning: polkit agent initialization failed: %s\n"
msgstr "मोडेम आरम्भीकरण असफ़ल रहा"

#: ../clients/cli/settings.c:46
#, c-format
msgid "Do you also want to set '%s' to '%s'? [yes]: "
msgstr "क्या आप '%s' को '%s' में सेट करना चाहते हैं? [yes]: "

#: ../clients/cli/settings.c:48
#, c-format
msgid "Do you also want to clear '%s'? [yes]: "
msgstr "क्या आप '%s' को साफ करना चाहते हैं? [yes]: "

#: ../clients/cli/settings.c:243
#, c-format
msgid ""
"Warning: %s.%s set to '%s', but it might be ignored in infrastructure mode\n"
msgstr ""
"चेतावनी: %s.%s '%s' मे सेट किया है, लेकिन यह बुनियादी अवस्था में अनदेखा किया जा सकता "
"है\n"

#: ../clients/cli/settings.c:262
#, c-format
msgid "Warning: setting %s.%s requires removing ipv4 and ipv6 settings\n"
msgstr ""

#: ../clients/cli/settings.c:264
#, fuzzy
msgid "Do you want to remove them? [yes] "
msgstr "क्या आप उन्हें प्रदान करना चाहते हैं? (हाँ/नहीं) [हाँ] "

#: ../clients/cli/settings.c:352
#, c-format
msgid "Warning: %s is not an UUID of any existing connection profile\n"
msgstr "चेतावनी: %s एक UUID नहीं है किसी मौजूदा कनेक्शन प्रोफ़ाइल का\n"

#: ../clients/cli/settings.c:357 ../clients/cli/settings.c:370
#, c-format
msgid "'%s' is not a VPN connection profile"
msgstr "'%s' एक वैध कनेक्शन प्रोफ़ाइल नहीं है"

#: ../clients/cli/settings.c:364
#, c-format
msgid "'%s' is not a name of any exiting profile"
msgstr "'%s'  किसी मौजूदा प्रोफ़ाइल का नाम नहीं है"

#: ../clients/cli/settings.c:408
#, c-format
msgid "Warning: %s\n"
msgstr ""

#: ../clients/cli/settings.c:411
#, fuzzy, c-format
msgid "Info: %s\n"
msgstr "त्रुटि: %s\n"

#: ../clients/cli/settings.c:504
msgid "don't know how to get the property value"
msgstr "विशेषता मान पाने के लिए नहीं जानते हैं कैसे"

#: ../clients/cli/settings.c:593
msgid "the property can't be changed"
msgstr "विशेषता बदला नहीं जा सकता है"

#: ../clients/cli/settings.c:671
msgid "[NM property description]"
msgstr "[NM विशेषता विवरण]"

#: ../clients/cli/settings.c:681
msgid "[nmcli specific description]"
msgstr "[nmcli विशिष्ट विवरण]"

#: ../clients/cli/utils.c:318
#, c-format
msgid "Error: Argument '%s' was expected, but '%s' provided."
msgstr "त्रुटि: वितर्क '%s' प्रत्याशित था, लेकिन '%s' प्रदान किया गया."

#: ../clients/cli/utils.c:321
#, c-format
msgid "Error: Unexpected argument '%s'"
msgstr "त्रुटि: '%s' अप्रत्याशित वितर्क."

#: ../clients/cli/utils.c:709
#, fuzzy, c-format
msgid "invalid field '%s%s%s'; no such field"
msgstr "अवैध क्षेत्र '%s'; अनुमतिप्राप्त क्षेत्र: %s"

#: ../clients/cli/utils.c:713
#, fuzzy, c-format
msgid "invalid field '%s%s%s'; allowed fields: [%s]"
msgstr "अवैध क्षेत्र '%s'; अनुमतिप्राप्त क्षेत्र: %s"

#: ../clients/cli/utils.c:809
#, fuzzy, c-format
msgid "failure to select field"
msgstr "निर्दिष्ट APN का चयन करने में विफल"

#: ../clients/cli/utils.c:1438
#, c-format
msgid "Error reading nmcli output: %s\n"
msgstr ""

#: ../clients/cli/utils.c:1443
#, c-format
msgid "Error writing nmcli output: %s\n"
msgstr ""

#: ../clients/cli/utils.c:1469
#, c-format
msgid "Failed to create pager pipe: %s\n"
msgstr ""

#: ../clients/cli/utils.c:1478
#, c-format
msgid "Failed to fork pager: %s\n"
msgstr ""

#: ../clients/cli/utils.c:1525 ../clients/cli/utils.c:1529
#, c-format
msgid "Failed to duplicate pager pipe: %s\n"
msgstr ""

#: ../clients/cli/utils.h:302 ../clients/common/nm-meta-setting-desc.c:4195
msgid "on"
msgstr "चालू"

#: ../clients/cli/utils.h:302 ../clients/common/nm-meta-setting-desc.c:4197
msgid "off"
msgstr "बंद"

#: ../clients/cli/utils.h:328
#, c-format
msgid "%lld (%s)"
msgstr ""

#: ../clients/cli/utils.h:335
#, c-format
msgid "%lld - %s"
msgstr ""

#. TRANSLATORS: the first %s is the partial value entered by
#. * the user, the second %s a list of compatible values.
#.
#: ../clients/common/nm-client-utils.c:121
#: ../clients/common/nm-client-utils.c:152
#, fuzzy, c-format
msgid "'%s' is ambiguous (%s)"
msgstr "'%s' दुविधापूर्ण है (%s x %s)"

#: ../clients/common/nm-client-utils.c:131
#, c-format
msgid "'%s' is not valid; use [%s] or [%s]"
msgstr "'%s' वैध नहीं है; [%s] या [%s] उपयोग करें"

#: ../clients/common/nm-client-utils.c:164
#, fuzzy, c-format
msgid "'%s' is not valid; use [%s], [%s] or [%s]"
msgstr "'%s' वैध नहीं है; [%s] या [%s] उपयोग करें"

#: ../clients/common/nm-client-utils.c:213
#, fuzzy, c-format
msgid "'%s' is ambiguous: %s"
msgstr "'%s' दुविधापूर्ण है (%s x %s)"

#: ../clients/common/nm-client-utils.c:223
#, c-format
msgid "missing name, try one of [%s]"
msgstr "अनुपस्थित नाम, [%s] में से एक की कोशिश करें"

#: ../clients/common/nm-client-utils.c:265
msgid "unmanaged"
msgstr "अप्रबंधित"

#: ../clients/common/nm-client-utils.c:266
msgid "unavailable"
msgstr "अनुपलब्ध"

#: ../clients/common/nm-client-utils.c:268
msgid "connecting (prepare)"
msgstr "कनेक्टिंग (तैयार)"

#: ../clients/common/nm-client-utils.c:269
msgid "connecting (configuring)"
msgstr "कनेक्टिंग (विन्यस्त कर रहा है)"

#: ../clients/common/nm-client-utils.c:270
msgid "connecting (need authentication)"
msgstr "कनेक्टिंग (सत्यापन जरूरी)"

#: ../clients/common/nm-client-utils.c:271
msgid "connecting (getting IP configuration)"
msgstr "कनेक्टिंग (IP विन्यास पा रहा है)"

#: ../clients/common/nm-client-utils.c:272
msgid "connecting (checking IP connectivity)"
msgstr "कनेक्टिंग (IP कनेक्शन जाँच रहा है)"

#: ../clients/common/nm-client-utils.c:273
msgid "connecting (starting secondary connections)"
msgstr "जुड़ रहा हैं (माध्यमिक कनेक्शन शुरू करने के लिए)"

#: ../clients/common/nm-client-utils.c:276
msgid "connection failed"
msgstr "कनेक्शन विफल"

#: ../clients/common/nm-client-utils.c:284
msgid "yes (guessed)"
msgstr ""

#: ../clients/common/nm-client-utils.c:285
msgid "no (guessed)"
msgstr ""

#. TRANSLATORS: Unknown reason for a device state change (NMDeviceStateReason)
#. TRANSLATORS: Unknown reason for a connection state change (NMActiveConnectionStateReason)
#: ../clients/common/nm-client-utils.c:291
#: ../clients/common/nm-client-utils.c:364 ../libnm/nm-device.c:1439
msgid "Unknown"
msgstr "अज्ञात"

#: ../clients/common/nm-client-utils.c:292
msgid "No reason given"
msgstr "कोई कारण नहीं दिया गया"

#: ../clients/common/nm-client-utils.c:294
msgid "Device is now managed"
msgstr "युक्ति अब प्रबंधित है"

#: ../clients/common/nm-client-utils.c:295
msgid "Device is now unmanaged"
msgstr "युक्ति अब प्रबंधित नहीं है"

#: ../clients/common/nm-client-utils.c:296
msgid "The device could not be readied for configuration"
msgstr "युक्ति विन्यास के लिए नहीं सज सकता है"

#: ../clients/common/nm-client-utils.c:297
msgid ""
"IP configuration could not be reserved (no available address, timeout, etc.)"
msgstr "आईपी ​​विन्यास (कोई उपलब्ध पता नहीं, मध्यांतर, आदि) आरक्षित नहीं किया जा सकता है"

#: ../clients/common/nm-client-utils.c:298
msgid "The IP configuration is no longer valid"
msgstr "आईपी ​​विन्यास अब मान्य नहीं है"

#: ../clients/common/nm-client-utils.c:299
msgid "Secrets were required, but not provided"
msgstr "गोपनीयता की आवश्यकता है, लेकिन नहीं प्रदान की गई"

#: ../clients/common/nm-client-utils.c:300
msgid "802.1X supplicant disconnected"
msgstr "802.1X निवेदक डिस्कनेक्ट हो गया"

#: ../clients/common/nm-client-utils.c:301
msgid "802.1X supplicant configuration failed"
msgstr "802.1X निवेदक विन्यास विफल रहा"

#: ../clients/common/nm-client-utils.c:302
msgid "802.1X supplicant failed"
msgstr "802.1X निवेदक विफल रहा"

#: ../clients/common/nm-client-utils.c:303
msgid "802.1X supplicant took too long to authenticate"
msgstr "802.1X निवेदक को प्रमाणित करने में बहुत ज्यादा समय लग रहा हैं"

#: ../clients/common/nm-client-utils.c:304
msgid "PPP service failed to start"
msgstr "PPP सेवा आरंभ होने में विफल रहा"

#: ../clients/common/nm-client-utils.c:305
msgid "PPP service disconnected"
msgstr "PPP सेवा डिस्कनेक्ट हो गया"

#: ../clients/common/nm-client-utils.c:306
msgid "PPP failed"
msgstr "PPP विफल"

#: ../clients/common/nm-client-utils.c:307
msgid "DHCP client failed to start"
msgstr "DHCP क्लाइंट के लिए प्रारंभ करने में विफल"

#: ../clients/common/nm-client-utils.c:308
msgid "DHCP client error"
msgstr "DHCP क्लाएंट त्रुटि"

#: ../clients/common/nm-client-utils.c:309
msgid "DHCP client failed"
msgstr "DHCP क्लाइंट विफल"

#: ../clients/common/nm-client-utils.c:310
msgid "Shared connection service failed to start"
msgstr "साझा कनेक्शन सेवा प्रारंभ करने में विफल"

#: ../clients/common/nm-client-utils.c:311
msgid "Shared connection service failed"
msgstr "साझा कनेक्शन सेवा विफल"

#: ../clients/common/nm-client-utils.c:312
msgid "AutoIP service failed to start"
msgstr "AutoIP  सेवा आरंभ होने में विफल रहा"

#: ../clients/common/nm-client-utils.c:313
msgid "AutoIP service error"
msgstr "AutoIP सेवा त्रुटि"

#: ../clients/common/nm-client-utils.c:314
msgid "AutoIP service failed"
msgstr "VPN सेवा विफल"

#: ../clients/common/nm-client-utils.c:315
msgid "The line is busy"
msgstr "लाइन व्यस्त है"

#: ../clients/common/nm-client-utils.c:316
msgid "No dial tone"
msgstr "डायल टोन नहीं"

#: ../clients/common/nm-client-utils.c:317
msgid "No carrier could be established"
msgstr "कोई वाहक स्थापित नहीं किया जा सकता"

#: ../clients/common/nm-client-utils.c:318
msgid "The dialing request timed out"
msgstr "डायलन अनुरोध का समय समाप्त"

#: ../clients/common/nm-client-utils.c:319
msgid "The dialing attempt failed"
msgstr "डायलन करने का प्रयास विफल"

#: ../clients/common/nm-client-utils.c:320
msgid "Modem initialization failed"
msgstr "मोडेम आरम्भीकरण असफ़ल रहा"

#: ../clients/common/nm-client-utils.c:321
msgid "Failed to select the specified APN"
msgstr "निर्दिष्ट APN का चयन करने में विफल"

#: ../clients/common/nm-client-utils.c:322
msgid "Not searching for networks"
msgstr "संजाल के लिए कोई खोज नहीं"

#: ../clients/common/nm-client-utils.c:323
msgid "Network registration denied"
msgstr "नेटवर्क पंजीकरण से इनकार किया"

#: ../clients/common/nm-client-utils.c:324
msgid "Network registration timed out"
msgstr "संजाल पंजीयन समयबाह्य हो गई है"

#: ../clients/common/nm-client-utils.c:325
msgid "Failed to register with the requested network"
msgstr "अनुरोध नेटवर्क के साथ पंजीकृत करने में विफल"

#: ../clients/common/nm-client-utils.c:326
msgid "PIN check failed"
msgstr "PIN चेक करने में विफल रहा"

#: ../clients/common/nm-client-utils.c:327
msgid "Necessary firmware for the device may be missing"
msgstr "इस उपकरण के लिए आवश्यक फर्मवेयर लापता हो सकता है"

#: ../clients/common/nm-client-utils.c:328
msgid "The device was removed"
msgstr "उपकरण हटाया गया था"

#: ../clients/common/nm-client-utils.c:329
msgid "NetworkManager went to sleep"
msgstr "नेटवर्कप्रबंधक सो गया"

#: ../clients/common/nm-client-utils.c:330
msgid "The device's active connection disappeared"
msgstr "उपकरण सक्रिय कनेक्शन गायब हो गया"

#: ../clients/common/nm-client-utils.c:331
msgid "Device disconnected by user or client"
msgstr "युक्ति उपयोगकर्ता या ग्राहक द्वारा डिस्कनेक्ट कर दिया गया"

#: ../clients/common/nm-client-utils.c:332
msgid "Carrier/link changed"
msgstr " कैरियर/लिंक बदल दिया गया"

#: ../clients/common/nm-client-utils.c:333
msgid "The device's existing connection was assumed"
msgstr "डिवाइस मौजूदा कनेक्शन मान लिया गया था."

#: ../clients/common/nm-client-utils.c:334
msgid "The supplicant is now available"
msgstr "निवेदक अब उपलब्ध है"

#: ../clients/common/nm-client-utils.c:335
msgid "The modem could not be found"
msgstr "मॉडेम पाया नहीं जा सका"

#: ../clients/common/nm-client-utils.c:336
msgid "The Bluetooth connection failed or timed out"
msgstr "ब्लूटूथ कनेक्शन में विफल रहा है या समयबाह्य हो गई है"

#: ../clients/common/nm-client-utils.c:337
msgid "GSM Modem's SIM card not inserted"
msgstr "जीएसएम मोडेम सिम कार्ड नहीं सम्मिलित किया गया हैं"

#: ../clients/common/nm-client-utils.c:338
msgid "GSM Modem's SIM PIN required"
msgstr "जीएसएम मोडेम सिम पिन आवश्यक "

#: ../clients/common/nm-client-utils.c:339
msgid "GSM Modem's SIM PUK required"
msgstr "जीएसएम मोडेम सिम PUK की आवश्यकता है"

#: ../clients/common/nm-client-utils.c:340
msgid "GSM Modem's SIM wrong"
msgstr "जीएसएम मोडेम सिम गलत"

#: ../clients/common/nm-client-utils.c:341
msgid "InfiniBand device does not support connected mode"
msgstr "InfiniBand डिवाइस जुड़ा हुआ मोड का समर्थन नहीं करता हैं"

#: ../clients/common/nm-client-utils.c:342
msgid "A dependency of the connection failed"
msgstr "कनेक्शन के एक निर्भरता विफल रहा"

#: ../clients/common/nm-client-utils.c:343
msgid "A problem with the RFC 2684 Ethernet over ADSL bridge"
msgstr "ADSL ब्रिज पर आरएफसी 2684 ईथरनेट के साथ एक समस्या"

#: ../clients/common/nm-client-utils.c:344
msgid "ModemManager is unavailable"
msgstr "ModemManager अनुपलब्ध है"

#: ../clients/common/nm-client-utils.c:345
msgid "The Wi-Fi network could not be found"
msgstr "वाइ-फाइ संजाल पाया नहीं जा सका"

#: ../clients/common/nm-client-utils.c:346
msgid "A secondary connection of the base connection failed"
msgstr "बेस कनेक्शन का दूसरा कनेक्शन विफल रहा"

#: ../clients/common/nm-client-utils.c:347
msgid "DCB or FCoE setup failed"
msgstr "DCB या FCoE सेटअप विफल"

#: ../clients/common/nm-client-utils.c:348
msgid "teamd control failed"
msgstr "टीम का नियंत्रण विफल"

#: ../clients/common/nm-client-utils.c:349
msgid "Modem failed or no longer available"
msgstr "मोडेम विफल या अब अनुपलब्ध है"

#: ../clients/common/nm-client-utils.c:350
msgid "Modem now ready and available"
msgstr "मोडेम तैयार या अब उपलब्ध है"

#: ../clients/common/nm-client-utils.c:351
msgid "SIM PIN was incorrect"
msgstr "SIM PIN सही था"

#: ../clients/common/nm-client-utils.c:352
#, fuzzy
msgid "New connection activation was enqueued"
msgstr "त्रुटि: कनेक्शन सक्रिय किया जाना विफल."

#: ../clients/common/nm-client-utils.c:353
#, fuzzy
msgid "The device's parent changed"
msgstr "उपकरण हटाया गया था"

#: ../clients/common/nm-client-utils.c:354
#, fuzzy
msgid "The device parent's management changed"
msgstr "उपकरण हटाया गया था"

#: ../clients/common/nm-client-utils.c:355
#, fuzzy
msgid "Open vSwitch database connection failed"
msgstr "कनेक्शन विफल"

#: ../clients/common/nm-client-utils.c:356
msgid "A duplicate IP address was detected"
msgstr ""

#: ../clients/common/nm-client-utils.c:357
msgid "The selected IP method is not supported"
msgstr ""

#: ../clients/common/nm-client-utils.c:358
#, fuzzy
msgid "Failed to configure SR-IOV parameters"
msgstr "विन्यास को पढ़ने में असफ़ल: (%d) %s\n"

#: ../clients/common/nm-client-utils.c:359
#, fuzzy
msgid "The Wi-Fi P2P peer could not be found"
msgstr "वाइ-फाइ संजाल पाया नहीं जा सका"

#: ../clients/common/nm-client-utils.c:365
#, fuzzy
msgid "Unknown reason"
msgstr "अज्ञात कारण"

#: ../clients/common/nm-client-utils.c:366
#, fuzzy
msgid "The connection was disconnected"
msgstr "जुड़ रहा हैं (माध्यमिक कनेक्शन शुरू करने के लिए)"

#: ../clients/common/nm-client-utils.c:367
#, fuzzy
msgid "Disconnected by user"
msgstr "डिबस से डिसकनेक्टेड"

#: ../clients/common/nm-client-utils.c:368
#, fuzzy
msgid "The base network connection was interrupted"
msgstr "मौलिक संजाल कनेक्शन में बाधा आई थी"

#: ../clients/common/nm-client-utils.c:369
#, fuzzy
msgid "The VPN service stopped unexpectedly"
msgstr "VPN सेवा अचानक रुक गई"

#: ../clients/common/nm-client-utils.c:370
#, fuzzy
msgid "The VPN service returned invalid configuration"
msgstr "VPN सेवा ने अवैध विन्यास वापस किया"

#: ../clients/common/nm-client-utils.c:371
#, fuzzy
msgid "The connection attempt timed out"
msgstr "कनेक्शन प्रयास का समय समाप्त"

#: ../clients/common/nm-client-utils.c:372
#, fuzzy
msgid "The VPN service did not start in time"
msgstr "VPN सेवा समय पर आरंभ नहीं हुआ"

#: ../clients/common/nm-client-utils.c:373
#, fuzzy
msgid "The VPN service failed to start"
msgstr "VPN सेवा आरंभ होने में विफल रहा"

#: ../clients/common/nm-client-utils.c:374
#, fuzzy
msgid "No valid secrets"
msgstr "कोई वैध VPN गुप्त नहीं"

#: ../clients/common/nm-client-utils.c:375
#, fuzzy
msgid "Invalid secrets"
msgstr "अवैध VPN गुप्त"

#: ../clients/common/nm-client-utils.c:376
#, fuzzy
msgid "The connection was removed"
msgstr "कनेक्शन हटाया गया था"

#: ../clients/common/nm-client-utils.c:377
#, fuzzy
msgid "Master connection failed"
msgstr "कनेक्शन विफल"

#: ../clients/common/nm-client-utils.c:378
#, fuzzy
msgid "Could not create a software link"
msgstr "अस्थायी फ़ाइल नहीं बना सका: %s"

#: ../clients/common/nm-client-utils.c:379
#, fuzzy
msgid "The device disappeared"
msgstr "उपकरण सक्रिय कनेक्शन गायब हो गया"

#: ../clients/common/nm-meta-setting-access.c:510
#, c-format
msgid "field '%s' has to be alone"
msgstr "क्षेत्र '%s' को अलग रहना है"

#: ../clients/common/nm-meta-setting-access.c:525
#, fuzzy, c-format
msgid "invalid field '%s%s%s%s%s'; %s%s%s"
msgstr "अवैध क्षेत्र '%s'; अनुमतिप्राप्त क्षेत्र: %s"

#: ../clients/common/nm-meta-setting-desc.c:311
#: ../clients/common/nm-meta-setting-desc.c:372
#, c-format
msgid "invalid prefix '%s'; <1-%d> allowed"
msgstr "अवैध उपसर्ग '%s'; <1-%d> अनुमति"

#: ../clients/common/nm-meta-setting-desc.c:319
#, fuzzy, c-format
msgid "invalid IP address: %s"
msgstr "अमान्य IPv4 पता '%s'"

#: ../clients/common/nm-meta-setting-desc.c:344
msgid ""
"The valid syntax is: 'ip[/prefix] [next-hop] [metric] [attribute=val]... [,"
"ip[/prefix] ...]'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:383
#, c-format
msgid "the next hop ('%s') must be first"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:389
#, c-format
msgid "the metric ('%s') must be before attributes"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:437
#, c-format
msgid "invalid route: %s. %s"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:503
#, c-format
msgid "cannot read pac-script from file '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:510
#, fuzzy, c-format
msgid "file '%s' contains non-valid utf-8"
msgstr "सूची '%s' वैध नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:523
#, fuzzy, c-format
msgid "'%s' does not contain a valid PAC Script"
msgstr "'%s' वैध PSK नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:526
#, fuzzy, c-format
msgid "Not a valid PAC Script"
msgstr "एक वैध MAC पता नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:579
#, c-format
msgid "cannot read team config from file '%s'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:586
#, c-format
msgid "team config file '%s' contains non-valid utf-8"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1034
msgid "auto"
msgstr "auto"

#: ../clients/common/nm-meta-setting-desc.c:1186
#, c-format
msgid "%s (%s)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1334
#: ../clients/common/nm-meta-setting-desc.c:1338
#, fuzzy
msgid "'%s' is out of range [%"
msgstr "मान '%d' परिसर के बाहर है <%d-%d>"

#: ../clients/common/nm-meta-setting-desc.c:1343
#, c-format
msgid "'%s' is not a valid number"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1400
#, c-format
msgid "'%s' is out of range [0, %u]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:1446
#, c-format
msgid "'%s' is not a valid Ethernet MAC"
msgstr "'%s' एक वैध इथरनेट MAC नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:1554
#, fuzzy, c-format
msgid "invalid option '%s', use a combination of [%s]"
msgstr "'%s' अवैध विकल्प या इसका मान '%s'"

#: ../clients/common/nm-meta-setting-desc.c:1559 ../libnm-core/nm-keyfile.c:884
#, fuzzy, c-format
msgid "invalid option '%s', use one of [%s]"
msgstr "'%s' अवैध विकल्प या इसका मान '%s'"

#: ../clients/common/nm-meta-setting-desc.c:1678
#, c-format
msgid "%d (key)"
msgstr "%d (key)"

#: ../clients/common/nm-meta-setting-desc.c:1680
#, c-format
msgid "%d (passphrase)"
msgstr "%d (पासफ्रेज)"

#: ../clients/common/nm-meta-setting-desc.c:1683
#, c-format
msgid "%d (unknown)"
msgstr "%d (अज्ञात)"

#: ../clients/common/nm-meta-setting-desc.c:1696
msgid "0 (NONE)"
msgstr "0 (कुछ नहीं)"

#: ../clients/common/nm-meta-setting-desc.c:1702
msgid "REORDER_HEADERS, "
msgstr "REORDER_HEADERS, "

#: ../clients/common/nm-meta-setting-desc.c:1704
msgid "GVRP, "
msgstr "GVRP, "

#: ../clients/common/nm-meta-setting-desc.c:1706
msgid "LOOSE_BINDING, "
msgstr "LOOSE_BINDING, "

#: ../clients/common/nm-meta-setting-desc.c:1708
#, fuzzy
msgid "MVRP, "
msgstr "GVRP, "

#: ../clients/common/nm-meta-setting-desc.c:1729
msgid "0 (none)"
msgstr "0 (कोई नहीं)"

#: ../clients/common/nm-meta-setting-desc.c:1735
msgid "agent-owned, "
msgstr "एजेंट-स्वामित्व, "

#: ../clients/common/nm-meta-setting-desc.c:1737
msgid "not saved, "
msgstr "सहेजा नहीं"

#: ../clients/common/nm-meta-setting-desc.c:1739
msgid "not required, "
msgstr "जरूरी नहीं, "

#: ../clients/common/nm-meta-setting-desc.c:1957
#, c-format
msgid "'%s' is not valid; use <option>=<value>"
msgstr "'%s' वैध नहीं है; <option>=<value> का उपयोग करें"

#: ../clients/common/nm-meta-setting-desc.c:1967
#, fuzzy, c-format
msgid "cannot set empty \"%s\" option"
msgstr "त्रुटि: '%s' गुण सेट करने में विफल: %s\n"

#: ../clients/common/nm-meta-setting-desc.c:2026
#, fuzzy, c-format
msgid "'%u' flags are not valid; use combination of %s"
msgstr "'%s' वैध नहीं है; [%s] या [%s] उपयोग करें"

#: ../clients/common/nm-meta-setting-desc.c:2043
#, c-format
msgid "'%s' is not a valid number (or out of range)"
msgstr "'%s' वैध संख्या नहीं है (या परिसर से बाहर)"

#: ../clients/common/nm-meta-setting-desc.c:2064
#: ../clients/common/nm-meta-setting-desc.c:4111 ../src/nm-config.c:546
#, c-format
msgid "'%s' is not valid"
msgstr "'%s' वैध नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:2161
#, fuzzy
msgid "not a valid hex-string"
msgstr "कोई वैध अंतरफलक नाम नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:2177
#, c-format
msgid "'%s' is not a valid hex character"
msgstr "'%s' एक वैध हेस्क वर्ण नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:2256
msgid ""
"too many arguments. Please only specify a private key file and optionally a "
"password"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:2363
#, fuzzy, c-format
msgid "failed to set bond option \"%s\""
msgstr "त्रुटि: '%s' गुण सेट करने में विफल: %s\n"

#: ../clients/common/nm-meta-setting-desc.c:2380
#, c-format
msgid ""
"Enter a list of bonding options formatted as:\n"
"  option = <value>, option = <value>,... \n"
"Valid options are: %s\n"
"'mode' can be provided as a name or a number:\n"
"balance-rr    = 0\n"
"active-backup = 1\n"
"balance-xor   = 2\n"
"broadcast     = 3\n"
"802.3ad       = 4\n"
"balance-tlb   = 5\n"
"balance-alb   = 6\n"
"\n"
"Example: mode=2,miimon=120\n"
msgstr ""
"बांडिंग विकल्प की सूची को इस प्रकार प्रारूपित रूप में दर्ज करें:\n"
"  option = <value>, option = <value>,... \n"
"Valid options are: %s\n"
"'mode' can be provided as a name or a number:\n"
"balance-rr    = 0\n"
"active-backup = 1\n"
"balance-xor   = 2\n"
"broadcast     = 3\n"
"802.3ad       = 4\n"
"balance-tlb   = 5\n"
"balance-alb   = 6\n"
"\n"
"उदाहरण: mode=2,miimon=120\n"

#. Don't allow setting type unless the connection is brand new.
#. * Just because it's a bad idea and the user wouldn't probably want that.
#. * No technical reason, really.
#. * Also, using uuid to see if the connection is brand new is a bit
#. * hacky: we can not see if the type is already set, because
#. * nmc_setting_set_property() is called only after the property
#. * we're setting (type) has been removed.
#: ../clients/common/nm-meta-setting-desc.c:2445
#, fuzzy, c-format
msgid "Can not change the connection type"
msgstr "कनेक्शन प्रकार दर्ज करें: "

#: ../clients/common/nm-meta-setting-desc.c:2523
#, fuzzy, c-format
msgid "invalid permission \"%s\""
msgstr "अवैध IPv4 रूट '%s'"

#: ../clients/common/nm-meta-setting-desc.c:2560
#, c-format
msgid "'%s' is not valid master; use ifname or connection UUID"
msgstr "'%s' एक वैध मास्टर नहीं है; ifname या कनेक्शन UUID का उपयोग करें"

#: ../clients/common/nm-meta-setting-desc.c:2641
#, c-format
msgid "the value '%s' is not a valid UUID"
msgstr "मान '%s' एक वैध UUID नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:2712
msgid "0 (disabled)"
msgstr "0 (disabled)"

#: ../clients/common/nm-meta-setting-desc.c:2718
msgid "enabled, "
msgstr "सक्षम, "

#: ../clients/common/nm-meta-setting-desc.c:2720
msgid "advertise, "
msgstr "विज्ञापित करें,"

#: ../clients/common/nm-meta-setting-desc.c:2722
msgid "willing, "
msgstr "इच्छुक, "

#: ../clients/common/nm-meta-setting-desc.c:2811
#, c-format
msgid "'%s' is not a valid DCB flag"
msgstr "'%s' वैध DCB फ्लैग नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:2838
msgid "must contain 8 comma-separated numbers"
msgstr "जरूर ८ कौमा से पृथक संख्या समाहित करनी चाहिए"

#: ../clients/common/nm-meta-setting-desc.c:2852
#, c-format
msgid "'%s' not a number between 0 and %u (inclusive) or %u"
msgstr "'%s' 0 और %u (समावेशी) अथवा %u के बीच की संख्या नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:2855
#, c-format
msgid "'%s' not a number between 0 and %u (inclusive)"
msgstr "'%s' 0 और %u (समावेशी) के बीच की संख्या नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:2876
#, fuzzy, c-format
msgid "changes will have no effect until '%s' includes 1 (enabled)"
msgstr ""
"चेतावनी: परिवर्तन तबतक प्रभावी नहीं होगा जब '%s' शामिल करता है 1 (सक्रिय)\n"
"\n"

#: ../clients/common/nm-meta-setting-desc.c:2906
#, c-format
msgid "bandwidth percentages must total 100%%"
msgstr "बैंडबिड्थ प्रतिशत कुल 100%% होना चाहिए"

#: ../clients/common/nm-meta-setting-desc.c:2977
#: ../clients/common/nm-meta-setting-desc.c:2983
msgid "SIM operator ID must be a 5 or 6 number MCCMNC code"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3007
#, c-format
msgid "'%s' is not a valid IBoIP P_Key"
msgstr "'%s' वैध IBoIP P_Key नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:3030
msgid "default"
msgstr "तयशुदा"

#: ../clients/common/nm-meta-setting-desc.c:3194
#, fuzzy, c-format
msgid "invalid IPv%c address '%s'"
msgstr "अमान्य IPv4 पता '%s'"

#: ../clients/common/nm-meta-setting-desc.c:3321
#, fuzzy, c-format
msgid "invalid gateway address '%s'"
msgstr "अवैध गेटवे '%s'"

#: ../clients/common/nm-meta-setting-desc.c:3471
#, c-format
msgid "'%s' is not a valid channel; use <1-13>"
msgstr "'%s' एक वैध चैनल नहीं है; <1-13> का उपयोग करें"

#: ../clients/common/nm-meta-setting-desc.c:3551
msgid "The valid syntax is: vf [attribute=value]... [,vf [attribute=value]...]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3575
#: ../clients/common/nm-meta-setting-desc.c:3655
msgid ""
"The valid syntax is: '[root | parent <handle>] [handle <handle>] <kind>'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3600
msgid "The valid syntax is: '<vid>[-<vid>] [pvid] [untagged]'"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:3875
#, c-format
msgid "invalid priority map '%s'"
msgstr "अवैध प्राथमिकता नक्शा '%s'"

#: ../clients/common/nm-meta-setting-desc.c:3963
#, fuzzy, c-format
msgid "'%s' is not valid; 2 or 3 strings should be provided"
msgstr "'%s' वैध नहीं है; 3 स्ट्रिंग दिया जाना चाहिए"

#: ../clients/common/nm-meta-setting-desc.c:4002
#, c-format
msgid ""
"Enter a list of S/390 options formatted as:\n"
"  option = <value>, option = <value>,...\n"
"Valid options are: %s\n"
msgstr ""
"S/390 विकल्प इस प्रकार संरूपित:\n"
"  विकल्प = <value>, option = <value>,...\n"
"वैध विकल्प हैं: %s\n"

#: ../clients/common/nm-meta-setting-desc.c:4037
#, c-format
msgid "'%s' is not a valid channel"
msgstr "'%s' वैध चैनल नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:4043
#, c-format
msgid "'%ld' is not a valid channel"
msgstr "'%ld' वैध चैनल नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:4060
#: ../libnm-core/nm-setting-sriov.c:443 ../libnm-core/nm-setting-wired.c:786
#: ../libnm-core/nm-setting-wireless.c:844
#: ../libnm-core/nm-setting-wireless.c:856
#, c-format
msgid "'%s' is not a valid MAC address"
msgstr "'%s' एक वैध MAC पता नहीं है"

#: ../clients/common/nm-meta-setting-desc.c:4120
#, c-format
msgid ""
"'%s' not compatible with %s '%s', please change the key or set the right %s "
"first."
msgstr "'%s' %s '%s' के साथ संगत नहीं है, पहले दाहिने %s को सेट करें या कुँजी सेट बदलें."

#: ../clients/common/nm-meta-setting-desc.c:4130
#, fuzzy, c-format
msgid "WEP key is guessed to be of '%s'"
msgstr "WEP कुँजी '%s' का अनुमानित है\n"

#: ../clients/common/nm-meta-setting-desc.c:4135
#, fuzzy, c-format
msgid "WEP key index set to '%d'"
msgstr "WEP कुँजी इंडेस्क '%d' में सेट है\n"

#: ../clients/common/nm-meta-setting-desc.c:4174
#, fuzzy, c-format
msgid "'%s' is not compatible with '%s' type, please change or delete the key."
msgstr "चेतावनी: '%s' '%s' किस्म के साथ संगत नहीं है, कृपया कुंजी को बदलें या मिटाएँ.\n"

#: ../clients/common/nm-meta-setting-desc.c:4231
#, fuzzy, c-format
msgid "'%s' is not valid; use 'on', 'off', or 'ignore'"
msgstr "'%s' वैध नहीं है; 0, 1, अथवा 2 का उपयोग करें"

#: ../clients/common/nm-meta-setting-desc.c:4291
#, fuzzy
msgid "Bonding primary interface [none]"
msgstr "बांडिंग प्राथमिक अंतरफलक [कोई नहीं]: "

#. this is a virtual property, only needed during "ask" mode.
#: ../clients/common/nm-meta-setting-desc.c:4298
#, fuzzy
msgid "Bonding monitoring mode"
msgstr "बाँडिंग मॉनिटरिंग अवस्था %s"

#: ../clients/common/nm-meta-setting-desc.c:4307
#, fuzzy
msgid "Bonding miimon [100]"
msgstr "बांडिंग miimon [100]: "

#: ../clients/common/nm-meta-setting-desc.c:4315
#, fuzzy
msgid "Bonding downdelay [0]"
msgstr "बांडिंग downdelay [0]: "

#: ../clients/common/nm-meta-setting-desc.c:4323
#, fuzzy
msgid "Bonding updelay [0]"
msgstr "बांडिंग updelay [0]: "

#: ../clients/common/nm-meta-setting-desc.c:4331
#, fuzzy
msgid "Bonding arp-interval [0]"
msgstr "बांडिंग arp-interval [0]: "

#: ../clients/common/nm-meta-setting-desc.c:4339
#, fuzzy
msgid "Bonding arp-ip-target [none]"
msgstr "बांडिंग arp-ip-target [none]: "

#: ../clients/common/nm-meta-setting-desc.c:4347
msgid "LACP rate ('slow' or 'fast') [slow]"
msgstr ""

#. macro that returns @func as const (guint32(*)(NMSetting*)) type, but checks
#. * that the actual type is (guint32(*)(type *)).
#: ../clients/common/nm-meta-setting-desc.c:4512
msgid ""
"nmcli can accepts both direct JSON configuration data and a file name "
"containing the configuration. In the latter case the file is read and the "
"contents is put into this property.\n"
"\n"
"Examples: set team.config { \"device\": \"team0\", \"runner\": {\"name\": "
"\"roundrobin\"}, \"ports\": {\"eth1\": {}, \"eth2\": {}} }\n"
"          set team.config /etc/my-team.conf\n"
msgstr ""
"nmcli प्रत्यक्ष JSON विन्यास आँकड़ा स्वीकार कर सकता है और विन्यास समाहित करने वाले फ़ाइल "
"नाम. बाद की स्थिति में फ़ाइल फ़ाइल पढ़ा जाता है और सामग्री को इस गुण में डाला जाता है.\n"
"\n"
"उदाहरण: set team.config { \"device\": \"team0\", \"runner\": {\"name\": "
"\"roundrobin\"}, \"ports\": {\"eth1\": {}, \"eth2\": {}} }\n"
"          set team.config /etc/my-team.conf\n"

#: ../clients/common/nm-meta-setting-desc.c:4520
msgid ""
"Enter a list of link watchers formatted as dictionaries where the keys are "
"teamd properties. Dictionary pairs are in the form: key=value and pairs are "
"separated by ' '. Dictionaries are separated with ','.\n"
"The keys allowed/required in the dictionary change on the basis of the link "
"watcher type, while the only property common to all the link watchers is  "
"'name'*, which defines the link watcher to be specified.\n"
"\n"
"Properties available for the 'ethtool' link watcher:\n"
"  'delay-up', 'delay-down'\n"
"\n"
"Properties available for the 'nsna_ping' link watcher:\n"
"  'init-wait', 'interval', 'missed-max', 'target-host'*\n"
"\n"
"Properties available for the 'arp_ping' include all the ones for 'nsna_ping' "
"and:\n"
"  'source-host'*, 'validate-active', 'validate-inactive', 'send-always'.\n"
"\n"
"Properties flagged with a '*' are mandatory.\n"
"\n"
"Example:\n"
"   name=arp_ping source-host=172.16.1.1 target-host=172.16.1.254, "
"name=ethtool delay-up=3\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4553
#, fuzzy
msgid "IEEE 802.15.4 (WPAN) parent device or connection UUID"
msgstr "VLAN जनक युक्ति या कनेक्शन युक्ति UUID:"

#: ../clients/common/nm-meta-setting-desc.c:4586
msgid ""
"Enter file path to CA certificate (optionally prefixed with file://).\n"
"  [file://]<file path>\n"
"Note that nmcli does not support specifying certificates as raw blob data.\n"
"Example: /home/cimrman/cacert.crt\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4625
msgid ""
"Enter file path to client certificate (optionally prefixed with file://).\n"
"  [file://]<file path>\n"
"Note that nmcli does not support specifying certificates as raw blob data.\n"
"Example: /home/cimrman/jara.crt\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4682
msgid ""
"Enter file path to CA certificate for inner authentication (optionally "
"prefixed\n"
"with file://).\n"
"  [file://]<file path>\n"
"Note that nmcli does not support specifying certificates as raw blob data.\n"
"Example: /home/cimrman/ca-zweite-phase.crt\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4722
msgid ""
"Enter file path to client certificate for inner authentication (optionally "
"prefixed\n"
"with file://).\n"
"  [file://]<file path>\n"
"Note that nmcli does not support specifying certificates as raw blob data.\n"
"Example: /home/cimrman/jara-zweite-phase.crt\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4749
msgid ""
"Enter bytes as a list of hexadecimal values.\n"
"Two formats are accepted:\n"
"(a) a string of hexadecimal digits, where each two digits represent one "
"byte\n"
"(b) space-separated list of bytes written as hexadecimal digits (with "
"optional 0x/0X prefix, and optional leading 0).\n"
"\n"
"Examples: ab0455a6ea3a74C2\n"
"          ab 4 55 0xa6 ea 3a 74 C2\n"
msgstr ""
"बाइट को हेक्साडेसीमल मान के रूप में दर्ज करें.\n"
"दो स्वरूप स्वीकार्य हैं:\n"
"(a) हेक्साडेसीमल अंक का स्ट्रिंग, जहाँ हर को अंक एक बाइट को बताता है\n"
"(b) स्थान से अलग बाइट की सूची बतौर हेक्साडेसीमल लिखित (वैकल्पिक 0x/0X प्रीफिक्स, और "
"वैकल्पिक अग्रणी 0).\n"
"\n"
"Examples: ab0455a6ea3a74C2\n"
"          ab 4 55 0xa6 ea 3a 74 C2\n"

#: ../clients/common/nm-meta-setting-desc.c:4766
#: ../clients/common/nm-meta-setting-desc.c:4784
#, fuzzy
msgid ""
"Enter path to a private key and the key password (if not set yet):\n"
"  [file://]<file path> [<password>]\n"
"Note that nmcli does not support specifying private key as raw blob data.\n"
"Example: /home/cimrman/jara-priv-key Dardanely\n"
msgstr ""
"किसी निजी कुँजी में पथ दर्ज करें (यदि अबतक सेट नहीं है):\n"
"  <file path> [<password>]\n"
"उदाहरण: /home/cimrman/jara-priv-key Dardanely\n"

#: ../clients/common/nm-meta-setting-desc.c:4823
#: ../clients/common/nm-secret-agent-simple.c:281
#: ../clients/common/nm-secret-agent-simple.c:369
#: ../clients/tui/nmt-page-dsl.c:66 ../clients/tui/nmt-page-wifi.c:332
msgid "Username"
msgstr "उपयोक्तानाम"

#: ../clients/common/nm-meta-setting-desc.c:4829
#: ../clients/common/nm-meta-setting-desc.c:5044
#: ../clients/common/nm-meta-setting-desc.c:5434
#: ../clients/common/nm-meta-setting-desc.c:6339
#, fuzzy
msgid "Password [none]"
msgstr "कूटशब्द [कोई नहीं]:"

#: ../clients/common/nm-meta-setting-desc.c:4875
#, fuzzy
msgid "Bluetooth device address"
msgstr "ब्लूटूथ युक्ति पता:"

#: ../clients/common/nm-meta-setting-desc.c:4923
#: ../clients/common/nm-meta-setting-desc.c:5487
#: ../clients/common/nm-meta-setting-desc.c:6994
#: ../clients/common/nm-meta-setting-desc.c:7032
#: ../clients/common/nm-meta-setting-desc.c:7207
#: ../clients/common/nm-meta-setting-desc.c:7437
#, fuzzy
msgid "MAC [none]"
msgstr "MAC [none]: "

#: ../clients/common/nm-meta-setting-desc.c:4929
#, fuzzy
msgid "Enable STP [no]"
msgstr "STP सक्रिय करें %s"

#: ../clients/common/nm-meta-setting-desc.c:4935
#, fuzzy
msgid "STP priority [32768]"
msgstr "STP प्राथमिकता [32768]:"

#: ../clients/common/nm-meta-setting-desc.c:4941
#, fuzzy
msgid "Forward delay [15]"
msgstr "अग्रेषित विलंब [15]:"

#: ../clients/common/nm-meta-setting-desc.c:4947
#, fuzzy
msgid "Hello time [2]"
msgstr "हेलो समय [2]: "

#: ../clients/common/nm-meta-setting-desc.c:4953
#, fuzzy
msgid "Max age [20]"
msgstr "अधिकतम आयु [20]: "

#: ../clients/common/nm-meta-setting-desc.c:4959
#, fuzzy
msgid "MAC address ageing time [300]"
msgstr "MAC पता उम्र समय [300]: "

#: ../clients/common/nm-meta-setting-desc.c:4965
msgid "Group forward mask [0]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:4971
#, fuzzy
msgid "Enable IGMP snooping [no]"
msgstr "STP सक्रिय करें %s"

#: ../clients/common/nm-meta-setting-desc.c:5000
#, fuzzy
msgid "Bridge port priority [32]"
msgstr "ब्रिज पोर्ट प्राथमिकता [32]: "

#: ../clients/common/nm-meta-setting-desc.c:5006
#, fuzzy
msgid "Bridge port STP path cost [100]"
msgstr "ब्रिज पोर्ट STP पथ लागत [100]: "

#: ../clients/common/nm-meta-setting-desc.c:5012
#, fuzzy
msgid "Hairpin [no]"
msgstr "हेयरपिन प्रकार"

#: ../clients/common/nm-meta-setting-desc.c:5038
#: ../clients/common/nm-meta-setting-desc.c:5428
#: ../clients/common/nm-meta-setting-desc.c:6852
#, fuzzy
msgid "Username [none]"
msgstr "उपयोक्तानाम [कोई नहीं]:"

#: ../clients/common/nm-meta-setting-desc.c:5141
msgid ""
"Enter a list of user permissions. This is a list of user names formatted "
"as:\n"
"  [user:]<user name 1>, [user:]<user name 2>,...\n"
"The items can be separated by commas or spaces.\n"
"\n"
"Example: alice bob charlie\n"
msgstr ""
"उपयोक्ता अनुमति की सूची दें. यह इस प्रकार संरूपित नामों की सूची है:\n"
"  [user:]<user name 1>, [user:]<user name 2>,...\n"
"यह मद कौमा या स्थान के द्वारा पृथक होगा.\n"
"\n"
"उदाहरण: alice bob charlie\n"

#: ../clients/common/nm-meta-setting-desc.c:5193
msgid ""
"Enter secondary connections that should be activated when this connection "
"is\n"
"activated. Connections can be specified either by UUID or ID (name). nmcli\n"
"transparently translates names to UUIDs. Note that NetworkManager only "
"supports\n"
"VPNs as secondary connections at the moment.\n"
"The items can be separated by commas or spaces.\n"
"\n"
"Example: private-openvpn, fe6ba5d8-c2fc-4aae-b2e3-97efddd8d9a7\n"
msgstr ""
"द्वितीयक कनेक्शन का उपयोग करें जो सक्रिय किया जाना चाहिए जब यह\n"
"सक्रिय किया जाता है. कनेक्शन को या तो UUID या ID (name). nmcli\n"
"से निर्दिष्ट होना चाहिए जो नामों को UUID में पारदर्शी तरीके से अनूदित करता है. नोट करें "
"कि NetworkManager केवल\n"
"VPN को बतौर द्वितीयक कनेक्शन इस क्षण में  समर्थन करता है.\n"
"ये मद कौमा या स्थान से अलग किए जा सकते हैं.\n"
"\n"
"उदाहरण: private-openvpn, fe6ba5d8-c2fc-4aae-b2e3-97efddd8d9a7\n"

#: ../clients/common/nm-meta-setting-desc.c:5216
msgid ""
"Enter a value which indicates whether the connection is subject to a data\n"
"quota, usage costs or other limitations. Accepted options are:\n"
"'true','yes','on' to set the connection as metered\n"
"'false','no','off' to set the connection as not metered\n"
"'unknown' to let NetworkManager choose a value using some heuristics\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5444
#, fuzzy
msgid "APN"
msgstr "AP"

#: ../clients/common/nm-meta-setting-desc.c:5496
#: ../clients/common/nm-meta-setting-desc.c:7063
#: ../clients/common/nm-meta-setting-desc.c:7247
#, fuzzy
msgid "MTU [auto]"
msgstr "MTU [auto]: "

#: ../clients/common/nm-meta-setting-desc.c:5515
#, fuzzy
msgid "P_KEY [none]"
msgstr "P_KEY [none]: "

#: ../clients/common/nm-meta-setting-desc.c:5524
#, fuzzy
msgid "Parent interface [none]"
msgstr "जनक अंतरफलक [कोई नहीं]:"

#: ../clients/common/nm-meta-setting-desc.c:5551
msgid ""
"Enter a list of IPv4 addresses of DNS servers.\n"
"\n"
"Example: 8.8.8.8, 8.8.4.4\n"
msgstr ""
"DNS सर्वर IPv4 पता की सूची दर्ज करें .\n"
"\n"
"उदाहरण: 8.8.8.8, 8.8.4.4\n"

#: ../clients/common/nm-meta-setting-desc.c:5599
#, fuzzy
msgid "IPv4 address (IP[/plen]) [none]"
msgstr "IPv4 पता (IP[/plen] [gateway]) [none]: "

#: ../clients/common/nm-meta-setting-desc.c:5601
#, fuzzy
msgid ""
"Enter a list of IPv4 addresses formatted as:\n"
"  ip[/prefix], ip[/prefix],...\n"
"Missing prefix is regarded as prefix of 32.\n"
"\n"
"Example: 192.168.1.5/24, 10.0.0.11/24\n"
msgstr ""
"IPv4 पता की सूची इस प्रकार प्रारूपित तरीके से दर्ज करें:\n"
"  ip[/prefix] [gateway], ip[/prefix] [gateway],...\n"
"अनुपस्थित प्रीफिक्स 32 के प्रीफिक्स के रूप में माना जाएगा.\n"
"\n"
"उदाहरण: 192.168.1.5/24 192.168.1.1, 10.0.0.11/24\n"

#: ../clients/common/nm-meta-setting-desc.c:5620
#, fuzzy
msgid "IPv4 gateway [none]"
msgstr "IPv4 पता (IP[/plen] [gateway]) [none]: "

#: ../clients/common/nm-meta-setting-desc.c:5628
#, fuzzy
msgid ""
"Enter a list of IPv4 routes formatted as:\n"
"  ip[/prefix] [next-hop] [metric],...\n"
"\n"
"Missing prefix is regarded as a prefix of 32.\n"
"Missing next-hop is regarded as 0.0.0.0.\n"
"Missing metric means default (NM/kernel will set a default value).\n"
"\n"
"Examples: 192.168.2.0/24 192.168.2.1 3, 10.1.0.0/16 10.0.0.254\n"
"          10.1.2.0/24\n"
msgstr ""
"IPv4 रॉट की सूची ऐसे संरूपित रूप में दर्ज करें:\n"
"  ip/[prefix] next-hop [metric],...\n"
"\n"
"32 के प्रीफिक्स के रूप में अनुपस्थित पूर्वसर्ग.\n"
"0.0.0.0. की मेट्रिक के रूप में अनुपस्थित मेट्रिक.\n"
"अनुपस्थित मेट्रिक या 0 का अर्थ है तयशुदा मेट्रिक (NM/कर्नेल तयशुदा मान सेट करेगा).\n"
"\n"
"उदाहरण: 192.168.2.0/24 192.168.2.1 3, 10.1.0.0/16 10.0.0.254\n"
"          10.1.2.0/24\n"

#: ../clients/common/nm-meta-setting-desc.c:5668
msgid ""
"Enter a list of IPv4 routing rules formatted as:\n"
"  priority [prio] [from [src]] [to [dst]], ,...\n"
"\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5758
msgid ""
"Enter a list of IPv6 addresses of DNS servers.  If the IPv6 configuration "
"method is 'auto' these DNS servers are appended to those (if any) returned "
"by automatic configuration.  DNS servers cannot be used with the 'shared' or "
"'link-local' IPv6 configuration methods, as there is no upstream network. In "
"all other IPv6 configuration methods, these DNS servers are used as the only "
"DNS servers for this connection.\n"
"\n"
"Example: 2607:f0d0:1002:51::4, 2607:f0d0:1002:51::1\n"
msgstr ""
"DNS सर्वर के IPv6 की सूची दर्ज करें. यदि IPv6 विन्यास विधि 'auto' है इन DNS सर्वर को "
"(यदि कोई है) में जोड़ा जाएगा जो स्वचालित विन्यास के द्वारा वापस किया जाता है. DNS "
"सर्वर को 'shared' या 'link-local' IPv6 विन्यास विधि के द्वारा प्रयोग नहीं किया जा "
"सकता है, क्योंकि कोई अपस्ट्रीम संजाल नहीं है. सभी दूसरे IPv6 विन्यास विधि में, ये DNS सर्वर "
"को केवल प्रयोग किया जा सकता है  इस कनेक्शन के लिए DNS के साथ.\n"
"\n"
"उदाहरण: 2607:f0d0:1002:51::4, 2607:f0d0:1002:51::1\n"

#: ../clients/common/nm-meta-setting-desc.c:5812
#, fuzzy
msgid "IPv6 address (IP[/plen]) [none]"
msgstr "IPv6 पता (IP[/plen] [gateway]) [none]: "

#: ../clients/common/nm-meta-setting-desc.c:5814
#, fuzzy
msgid ""
"Enter a list of IPv6 addresses formatted as:\n"
"  ip[/prefix], ip[/prefix],...\n"
"Missing prefix is regarded as prefix of 128.\n"
"\n"
"Example: 2607:f0d0:1002:51::4/64, 1050:0:0:0:5:600:300c:326b\n"
msgstr ""
"IPv6 पता की सूची इस प्रकार प्रारूपित तरीके से दर्ज करें:\n"
"  ip[/prefix] [gateway], ip[/prefix] [gateway],...\n"
"अनुपस्थित प्रीफिक्स 32 के प्रीफिक्स के रूप में माना जाएगा.\n"
"\n"
"उदाहरण: 2607:f0d0:1002:51::4/64 2607:f0d0:1002:51::1, "
"1050:0:0:0:5:600:300c:326b\n"

#: ../clients/common/nm-meta-setting-desc.c:5833
#, fuzzy
msgid "IPv6 gateway [none]"
msgstr "IPv6 पता (IP[/plen] [gateway]) [none]: "

#: ../clients/common/nm-meta-setting-desc.c:5841
#, fuzzy
msgid ""
"Enter a list of IPv6 routes formatted as:\n"
"  ip[/prefix] [next-hop] [metric],...\n"
"\n"
"Missing prefix is regarded as a prefix of 128.\n"
"Missing next-hop is regarded as \"::\".\n"
"Missing metric means default (NM/kernel will set a default value).\n"
"\n"
"Examples: 2001:db8:beef:2::/64 2001:db8:beef::2, 2001:db8:beef:3::/64 2001:"
"db8:beef::3 2\n"
"          abbe::/64 55\n"
msgstr ""
"IPv6 रॉट की सूची ऐसे संरूपित रूप में दर्ज करें:\n"
"  ip/[prefix] next-hop [metric],... \n"
"\n"
"128 के प्रीफिक्स के रूप में अनुपस्थित पूर्वसर्ग.\n"
"\"::\" के रूप में अगला हॉप अनुपस्थित.\n"
"अनुपस्थित मेट्रिक या 0 का अर्थ तयशुदा मेट्रिक (NM/kernel will set a default value).\n"
"\n"
"उदाहरण: 2001:db8:beef:2::/64 2001:db8:beef::2, 2001:db8:beef:3::/64 2001:db8:"
"beef::3 2\n"
"          abbe::/64 55\n"

#: ../clients/common/nm-meta-setting-desc.c:5881
msgid ""
"Enter a list of IPv6 routing rules formatted as:\n"
"  priority [prio] [from [src]] [to [dst]], ,...\n"
"\n"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:5969
#: ../clients/common/nm-meta-setting-desc.c:6893
#, fuzzy
msgid "Parent device [none]"
msgstr "जनक अंतरफलक [कोई नहीं]:"

#: ../clients/common/nm-meta-setting-desc.c:5975
#, fuzzy
msgid "Local endpoint [none]"
msgstr "जनक अंतरफलक [कोई नहीं]:"

#: ../clients/common/nm-meta-setting-desc.c:5982
#: ../clients/common/nm-meta-setting-desc.c:6913
#, fuzzy
msgid "Remote"
msgstr "हटाएँ"

#: ../clients/common/nm-meta-setting-desc.c:6027
msgid "MACsec parent device or connection UUID"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6048
msgid "Enable encryption [yes]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6054
#: ../clients/common/nm-secret-agent-simple.c:930
msgid "MKA CAK"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6064
msgid "MKA_CKN"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6070
msgid "SCI port [1]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6096
#, fuzzy
msgid "MACVLAN parent device or connection UUID"
msgstr "VLAN जनक युक्ति या कनेक्शन युक्ति UUID:"

#: ../clients/common/nm-meta-setting-desc.c:6117
msgid "Tap [no]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6152
#: ../clients/common/nm-meta-setting-desc.c:7162
#: ../clients/tui/nmt-page-wifi.c:224
msgid "SSID"
msgstr "SSID"

#: ../clients/common/nm-meta-setting-desc.c:6161
#, fuzzy
msgid "OLPC Mesh channel [1]"
msgstr "OLPC मेश चैनल [1]:"

#: ../clients/common/nm-meta-setting-desc.c:6170
#, fuzzy
msgid "DHCP anycast MAC address [none]"
msgstr "DHCP anycast MAC पता [none]: "

#: ../clients/common/nm-meta-setting-desc.c:6320
#, fuzzy
msgid "PPPoE parent device"
msgstr "जनक अंतरफलक [कोई नहीं]:"

#: ../clients/common/nm-meta-setting-desc.c:6326
#, fuzzy
msgid "Service [none]"
msgstr "सर्विस [कोई नहीं]: "

#: ../clients/common/nm-meta-setting-desc.c:6333
#, fuzzy
msgid "PPPoE username"
msgstr "PPPoE उपयोक्तानाम: "

#: ../clients/common/nm-meta-setting-desc.c:6369
msgid "Browser only [no]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6375
msgid "PAC URL"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6381
msgid "PAC script"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6505
#: ../clients/common/nm-meta-setting-desc.c:6667
#, fuzzy
msgid "Team JSON configuration [none]"
msgstr "टीम JSON विन्यास [कोई नहीं]: "

#: ../clients/common/nm-meta-setting-desc.c:6755
#, fuzzy
msgid "User ID [none]"
msgstr "उपयोक्तानाम [कोई नहीं]:"

#: ../clients/common/nm-meta-setting-desc.c:6761
#, fuzzy
msgid "Group ID [none]"
msgstr "MAC [none]: "

#: ../clients/common/nm-meta-setting-desc.c:6767
#, fuzzy
msgid "Enable PI [no]"
msgstr "STP सक्रिय करें %s"

#: ../clients/common/nm-meta-setting-desc.c:6773
#, fuzzy
msgid "Enable VNET header [no]"
msgstr "STP सक्रिय करें %s"

#: ../clients/common/nm-meta-setting-desc.c:6779
msgid "Enable multi queue [no]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6792
#, fuzzy
msgid "VLAN parent device or connection UUID"
msgstr "VLAN जनक युक्ति या कनेक्शन युक्ति UUID:"

#: ../clients/common/nm-meta-setting-desc.c:6799
#, fuzzy
msgid "VLAN ID (<0-4094>)"
msgstr "VLAN ID <0-4095>:"

#: ../clients/common/nm-meta-setting-desc.c:6805
#, fuzzy
msgid "VLAN flags (<0-7>) [none]"
msgstr "VLAN फ्लैग (<0-7>) [none]: "

#: ../clients/common/nm-meta-setting-desc.c:6814
#, fuzzy
msgid "Ingress priority maps [none]"
msgstr "प्राथमिकता मैप [कोई नहीं]: "

#: ../clients/common/nm-meta-setting-desc.c:6824
#, fuzzy
msgid "Egress priority maps [none]"
msgstr "प्राथमिकता मैप [कोई नहीं]:"

#: ../clients/common/nm-meta-setting-desc.c:6900
#, fuzzy
msgid "VXLAN ID"
msgstr "VLAN ID <0-4095>:"

#: ../clients/common/nm-meta-setting-desc.c:6906
#, fuzzy
msgid "Local address [none]"
msgstr "DHCP anycast MAC पता [none]: "

#: ../clients/common/nm-meta-setting-desc.c:6919
msgid "Minimum source port [0]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6925
msgid "Maximum source port [0]"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:6931
#, fuzzy
msgid "Destination port [8472]"
msgstr "गंतव्य"

#: ../clients/common/nm-meta-setting-desc.c:6971
msgid "Peer"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7001
#, fuzzy
msgid "WiMAX NSP name"
msgstr "WiMAX NSP नाम: "

#: ../clients/common/nm-meta-setting-desc.c:7038
#: ../clients/common/nm-meta-setting-desc.c:7212
#, fuzzy
msgid "Cloned MAC [none]"
msgstr "क्लोन MAC [none]: "

#: ../clients/common/nm-meta-setting-desc.c:7071
#, fuzzy
msgid ""
"Enter a list of subchannels (comma or space separated).\n"
"\n"
"Example: 0.0.0e20 0.0.0e21 0.0.0e22\n"
msgstr ""
"तीन चैनल की सूची दर्ज करें (कौमा या स्थान से अलग).\n"
"\n"
"उदाहरण: 0.0.0e20 0.0.0e21 0.0.0e22\n"

#: ../clients/common/nm-meta-setting-desc.c:7386
msgid ""
"Enter the type of WEP keys. The accepted values are: 0 or unknown, 1 or key, "
"and 2 or passphrase.\n"
msgstr ""
"WEP कुँजी का प्रकार दर्ज करें. स्वीकार्य मान हैं: 0 या अज्ञात, 1 या कुँजी, और 2 या "
"कूटशब्द.\n"

#: ../clients/common/nm-meta-setting-desc.c:7445
msgid "Short address (<0x0000-0xffff>)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7461
msgid "PAN Identifier (<0x0000-0xffff>)"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7476
#, fuzzy
msgid "Page (<default|0-31>)"
msgstr "(तयशुदा)"

#: ../clients/common/nm-meta-setting-desc.c:7490
msgid "Channel (<default|0-26>)"
msgstr ""

#. ***************************************************************************
#: ../clients/common/nm-meta-setting-desc.c:7625
msgid "6LOWPAN settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7626
msgid "802-1x settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7627
#: ../src/devices/adsl/nm-device-adsl.c:132
msgid "ADSL connection"
msgstr "ADSL कनेक्शन"

#: ../clients/common/nm-meta-setting-desc.c:7628
#, fuzzy
msgid "bluetooth connection"
msgstr "बॉण्ड कनेक्शन"

#: ../clients/common/nm-meta-setting-desc.c:7629
#, fuzzy
msgid "Bond device"
msgstr "ईथरनेट"

#: ../clients/common/nm-meta-setting-desc.c:7630
#, fuzzy
msgid "Bridge device"
msgstr "ईथरनेट"

#: ../clients/common/nm-meta-setting-desc.c:7631
#, fuzzy
msgid "Bridge port"
msgstr "पुल"

#: ../clients/common/nm-meta-setting-desc.c:7632
#, fuzzy
msgid "CDMA mobile broadband connection"
msgstr "मोबाइल ब्रॉडबैंड कनेक्शन %d"

#: ../clients/common/nm-meta-setting-desc.c:7633
msgid "General settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7634
msgid "DCB settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7635
msgid "Dummy settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7636
msgid "Ethtool settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7637
msgid "Generic settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7638
#, fuzzy
msgid "GSM mobile broadband connection"
msgstr "मोबाइल ब्रॉडबैंड कनेक्शन %d"

#: ../clients/common/nm-meta-setting-desc.c:7639
#: ../src/devices/nm-device-infiniband.c:172
msgid "InfiniBand connection"
msgstr "InfiniBandकनेक्शन"

#: ../clients/common/nm-meta-setting-desc.c:7640
msgid "IPv4 protocol"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7641
msgid "IPv6 protocol"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7642
msgid "IP-tunnel settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7643
msgid "MACsec connection"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7644
#, fuzzy
msgid "macvlan connection"
msgstr "बॉण्ड कनेक्शन"

#: ../clients/common/nm-meta-setting-desc.c:7645
msgid "Match"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7646
#, fuzzy
msgid "OLPC Mesh connection"
msgstr "CDMA कनेक्शन"

#: ../clients/common/nm-meta-setting-desc.c:7647
msgid "Open vSwitch bridge settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7648
msgid "Open vSwitch interface settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7649
msgid "Open vSwitch patch interface settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7650
msgid "Open vSwitch port settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7651
msgid "PPP settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7652
msgid "PPPoE"
msgstr "PPPoE"

#: ../clients/common/nm-meta-setting-desc.c:7653
msgid "Proxy"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7654
msgid "Serial settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7655
msgid "SR-IOV settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7656
msgid "Traffic controls"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7657
#, fuzzy
msgid "Team device"
msgstr "उपकरण हटाया गया था"

#: ../clients/common/nm-meta-setting-desc.c:7658
#, fuzzy
msgid "Team port"
msgstr "टोली"

#: ../clients/common/nm-meta-setting-desc.c:7659
#, fuzzy
msgid "Tun device"
msgstr "उपकरण हटाया गया था"

#: ../clients/common/nm-meta-setting-desc.c:7660
msgid "User settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7661
#: ../src/devices/nm-device-vlan.c:400
msgid "VLAN connection"
msgstr "VLAN कनेक्शन"

#: ../clients/common/nm-meta-setting-desc.c:7662 ../src/nm-manager.c:5518
msgid "VPN connection"
msgstr "VPN कनेक्शन"

#: ../clients/common/nm-meta-setting-desc.c:7663
#: ../src/devices/nm-device-vxlan.c:369
#, fuzzy
msgid "VXLAN connection"
msgstr "VLAN कनेक्शन"

#: ../clients/common/nm-meta-setting-desc.c:7664
#, fuzzy
msgid "Wi-Fi P2P connection"
msgstr "वाई - फाई संबंधन %d"

#: ../clients/common/nm-meta-setting-desc.c:7665
#, fuzzy
msgid "WiMAX connection"
msgstr "CDMA कनेक्शन"

#: ../clients/common/nm-meta-setting-desc.c:7666
#, fuzzy
msgid "Wired Ethernet"
msgstr "ईथरनेट"

#: ../clients/common/nm-meta-setting-desc.c:7667
msgid "WireGuard VPN settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7668
#, fuzzy
msgid "Wi-Fi connection"
msgstr "वाई - फाई संबंधन %d"

#: ../clients/common/nm-meta-setting-desc.c:7669
msgid "Wi-Fi security settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:7670
msgid "WPAN settings"
msgstr ""

#: ../clients/common/nm-meta-setting-desc.c:8033
#, fuzzy
msgid "name"
msgstr "उपयोक्तानाम"

#: ../clients/common/nm-polkit-listener.c:238
msgid "An authentication session is already underway."
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:230
#, c-format
msgid "Preshared-key for %s"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:286
#: ../clients/common/nm-secret-agent-simple.c:323
#: ../clients/common/nm-secret-agent-simple.c:346
#: ../clients/common/nm-secret-agent-simple.c:379
#: ../clients/common/nm-secret-agent-simple.c:916
#: ../clients/common/nm-secret-agent-simple.c:951
#: ../clients/common/nm-secret-agent-simple.c:974
#: ../clients/common/nm-vpn-helpers.c:123
#: ../clients/common/nm-vpn-helpers.c:127
#: ../clients/common/nm-vpn-helpers.c:133
#: ../clients/common/nm-vpn-helpers.c:138 ../clients/tui/nmt-page-dsl.c:75
#: ../clients/tui/nmt-page-wifi.c:277 ../clients/tui/nmt-page-wifi.c:308
#: ../clients/tui/nmt-page-wifi.c:341
msgid "Password"
msgstr "कूटशब्द"

#: ../clients/common/nm-secret-agent-simple.c:295
msgid "Identity"
msgstr "पहचान"

#: ../clients/common/nm-secret-agent-simple.c:300
msgid "Private key password"
msgstr "निजी कुंजी कूटशब्द"

#: ../clients/common/nm-secret-agent-simple.c:336
#: ../clients/tui/nmt-page-wifi.c:289
msgid "Key"
msgstr "कुंजी"

#: ../clients/common/nm-secret-agent-simple.c:374
#: ../clients/tui/nmt-page-dsl.c:78
msgid "Service"
msgstr "सेवा"

#: ../clients/common/nm-secret-agent-simple.c:486
#, fuzzy
msgid "WireGuard private-key"
msgstr "अवैध निजी कुँजी"

#: ../clients/common/nm-secret-agent-simple.c:527
#, fuzzy, c-format
msgid "Secrets are required to connect WireGuard VPN '%s'"
msgstr "कूटशब्द या गोपन कुंजी बेतार संजाल '%s' की पहुँच के लिए जरूरी है."

#: ../clients/common/nm-secret-agent-simple.c:628
#: ../clients/common/nm-secret-agent-simple.c:912
#: ../clients/common/nm-secret-agent-simple.c:947
#: ../clients/common/nm-secret-agent-simple.c:970
#: ../clients/common/nm-secret-agent-simple.c:989
#, c-format
msgid "A password is required to connect to '%s'."
msgstr "'%s' में कनेक्ट होने के लिए एक कूटशब्द जरूरी है."

#: ../clients/common/nm-secret-agent-simple.c:879
msgid "Authentication required by wireless network"
msgstr "बेतार संजाल के द्वारा सत्यापन जरूरी"

#: ../clients/common/nm-secret-agent-simple.c:880
#, c-format
msgid ""
"Passwords or encryption keys are required to access the wireless network "
"'%s'."
msgstr "कूटशब्द या गोपन कुंजी बेतार संजाल '%s' की पहुँच के लिए जरूरी है."

#: ../clients/common/nm-secret-agent-simple.c:885
msgid "Wired 802.1X authentication"
msgstr "तारयुक्त 802.1X सत्यापन"

#: ../clients/common/nm-secret-agent-simple.c:886
#, fuzzy, c-format
msgid "Secrets are required to access the wired network '%s'"
msgstr "कूटशब्द या गोपन कुंजी बेतार संजाल '%s' की पहुँच के लिए जरूरी है."

#: ../clients/common/nm-secret-agent-simple.c:892
msgid "DSL authentication"
msgstr "डीएसएल सत्यापन"

#: ../clients/common/nm-secret-agent-simple.c:893
#, fuzzy, c-format
msgid "Secrets are required for the DSL connection '%s'"
msgstr "'%s' प्रकार के '%s' कनेक्शन के लिए संपादक नहीं बना सका."

#: ../clients/common/nm-secret-agent-simple.c:902
msgid "PIN code required"
msgstr "पिन कोड जरूरी"

#: ../clients/common/nm-secret-agent-simple.c:903
msgid "PIN code is needed for the mobile broadband device"
msgstr "पिन कोड मोबाइल ब्रॉडबैंड युक्ति के लिए जरूरी है"

#: ../clients/common/nm-secret-agent-simple.c:906
msgid "PIN"
msgstr "पिन"

#: ../clients/common/nm-secret-agent-simple.c:911
#: ../clients/common/nm-secret-agent-simple.c:946
#: ../clients/common/nm-secret-agent-simple.c:969
msgid "Mobile broadband network password"
msgstr "मोबाइल ब्रॉडबैंज संजाल कूटशब्द"

#: ../clients/common/nm-secret-agent-simple.c:924
#, c-format
msgid "Secrets are required to access the MACsec network '%s'"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:928
msgid "MACsec PSK authentication"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:935
msgid "MACsec EAP authentication"
msgstr ""

#: ../clients/common/nm-secret-agent-simple.c:940
#, fuzzy
msgid "WireGuard VPN secret"
msgstr "तारसहित"

#: ../clients/common/nm-secret-agent-simple.c:979
#, fuzzy
msgid "VPN password required"
msgstr "पिन कोड जरूरी"

#: ../clients/common/nm-vpn-helpers.c:52
#, fuzzy, c-format
msgid "unknown VPN plugin \"%s\""
msgstr "अज्ञात लॉग डोमेन '%s'"

#: ../clients/common/nm-vpn-helpers.c:63
#, fuzzy, c-format
msgid "cannot load legacy-only VPN plugin \"%s\" for \"%s\""
msgstr "त्रुटि: %s.%s बदलने में विफल: %s."

#: ../clients/common/nm-vpn-helpers.c:68
#, c-format
msgid ""
"cannot load VPN plugin \"%s\" due to missing \"%s\". Missing client plugin?"
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:73
#, fuzzy, c-format
msgid "failed to load VPN plugin \"%s\": %s"
msgstr "त्रुटि: %s.%s बदलने में विफल: %s."

#: ../clients/common/nm-vpn-helpers.c:128
#, fuzzy
msgid "Certificate password"
msgstr "निजी कुंजी कूटशब्द"

#: ../clients/common/nm-vpn-helpers.c:129
#, fuzzy
msgid "HTTP proxy password"
msgstr "कूटशब्द दिखाएँ"

#: ../clients/common/nm-vpn-helpers.c:134
#: ../clients/common/nm-vpn-helpers.c:139
#, fuzzy
msgid "Group password"
msgstr "कूटशब्द दिखाएँ"

#: ../clients/common/nm-vpn-helpers.c:143 ../clients/tui/nmt-page-ip4.c:143
#: ../clients/tui/nmt-page-ip6.c:143
msgid "Gateway"
msgstr "गेटवे"

#: ../clients/common/nm-vpn-helpers.c:144
msgid "Cookie"
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:145
#, fuzzy
msgid "Gateway certificate hash"
msgstr "अवैध प्रमाणपत्र आँकड़ा प्रारूप"

#: ../clients/common/nm-vpn-helpers.c:270
#, fuzzy, c-format
msgid "Invalid peer starting at %s:%zu: %s"
msgstr "त्रुटि: अवैध सेटिंग नाम; %s\n"

#: ../clients/common/nm-vpn-helpers.c:390
msgid ""
"The WireGuard config file must be a valid interface name followed by \".conf"
"\""
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:678
#, c-format
msgid "unrecognized line at %s:%zu"
msgstr ""

#: ../clients/common/nm-vpn-helpers.c:683
#, fuzzy, c-format
msgid "invalid value for '%s' at %s:%zu"
msgstr "'%s' '%s' के लिए वैध मान नहीं है"

#: ../clients/common/nm-vpn-helpers.c:688
#, fuzzy, c-format
msgid "invalid secret '%s' at %s:%zu"
msgstr "अवैध VPN गुप्त"

#: ../clients/common/nm-vpn-helpers.c:801
#, fuzzy, c-format
msgid "Failed to create WireGuard connection: %s"
msgstr "त्रुटि: नया कनेक्शन को जोड़ने के लिए / सक्रिय करने में विफल : (%d) %s"

#. Generated file. Do not edit.
#: ../clients/common/settings-docs.h.in:3
msgid ""
"If given, specifies the parent interface name or parent connection UUID from "
"which this 6LowPAN interface should be created."
msgstr ""

#: ../clients/common/settings-docs.h.in:4
msgid "Channel on which the mesh network to join is located."
msgstr ""

#: ../clients/common/settings-docs.h.in:5
msgid ""
"Anycast DHCP MAC address used when requesting an IP address via DHCP. The "
"specific anycast address used determines which DHCP server class answers the "
"request."
msgstr ""

#: ../clients/common/settings-docs.h.in:6
msgid "SSID of the mesh network to join."
msgstr ""

#: ../clients/common/settings-docs.h.in:7
msgid ""
"802.11 frequency band of the network.  One of \"a\" for 5GHz 802.11a or \"bg"
"\" for 2.4GHz 802.11.  This will lock associations to the Wi-Fi network to "
"the specific band, i.e. if \"a\" is specified, the device will not associate "
"with the same network in the 2.4GHz band even if the network's settings are "
"compatible.  This setting depends on specific driver capability and may not "
"work with all drivers."
msgstr ""

#: ../clients/common/settings-docs.h.in:8
msgid ""
"If specified, directs the device to only associate with the given access "
"point.  This capability is highly driver dependent and not supported by all "
"devices.  Note: this property does not control the BSSID used when creating "
"an Ad-Hoc network and is unlikely to in the future."
msgstr ""

#: ../clients/common/settings-docs.h.in:9
msgid ""
"Wireless channel to use for the Wi-Fi connection.  The device will only join "
"(or create for Ad-Hoc networks) a Wi-Fi network on the specified channel.  "
"Because channel numbers overlap between bands, this property also requires "
"the \"band\" property to be set."
msgstr ""

#: ../clients/common/settings-docs.h.in:10
msgid ""
"If specified, request that the device use this MAC address instead. This is "
"known as MAC cloning or spoofing. Beside explicitly specifying a MAC "
"address, the special values \"preserve\", \"permanent\", \"random\" and "
"\"stable\" are supported. \"preserve\" means not to touch the MAC address on "
"activation. \"permanent\" means to use the permanent hardware address of the "
"device. \"random\" creates a random MAC address on each connect. \"stable\" "
"creates a hashed MAC address based on connection.stable-id and a machine "
"dependent key. If unspecified, the value can be overwritten via global "
"defaults, see manual of NetworkManager.conf. If still unspecified, it "
"defaults to \"preserve\" (older versions of NetworkManager may use a "
"different default value). On D-Bus, this field is expressed as \"assigned-"
"mac-address\" or the deprecated \"cloned-mac-address\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:11
#: ../clients/common/settings-docs.h.in:91
msgid ""
"With \"cloned-mac-address\" setting \"random\" or \"stable\", by default all "
"bits of the MAC address are scrambled and a locally-administered, unicast "
"MAC address is created. This property allows to specify that certain bits "
"are fixed. Note that the least significant bit of the first MAC address will "
"always be unset to create a unicast MAC address. If the property is NULL, it "
"is eligible to be overwritten by a default connection setting. If the value "
"is still NULL or an empty string, the default is to create a locally-"
"administered, unicast MAC address. If the value contains one MAC address, "
"this address is used as mask. The set bits of the mask are to be filled with "
"the current MAC address of the device, while the unset bits are subject to "
"randomization. Setting \"FE:FF:FF:00:00:00\" means to preserve the OUI of "
"the current MAC address and only randomize the lower 3 bytes using the "
"\"random\" or \"stable\" algorithm. If the value contains one additional MAC "
"address after the mask, this address is used instead of the current MAC "
"address to fill the bits that shall not be randomized. For example, a value "
"of \"FE:FF:FF:00:00:00 68:F7:28:00:00:00\" will set the OUI of the MAC "
"address to 68:F7:28, while the lower bits are randomized. A value of "
"\"02:00:00:00:00:00 00:00:00:00:00:00\" will create a fully scrambled "
"globally-administered, burned-in MAC address. If the value contains more "
"than one additional MAC addresses, one of them is chosen randomly. For "
"example, \"02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00\" will "
"create a fully scrambled MAC address, randomly locally or globally "
"administered."
msgstr ""

#: ../clients/common/settings-docs.h.in:12
msgid ""
"If TRUE, indicates that the network is a non-broadcasting network that hides "
"its SSID. This works both in infrastructure and AP mode. In infrastructure "
"mode, various workarounds are used for a more reliable discovery of hidden "
"networks, such as probe-scanning the SSID.  However, these workarounds "
"expose inherent insecurities with hidden SSID networks, and thus hidden SSID "
"networks should be used with caution. In AP mode, the created network does "
"not broadcast its SSID. Note that marking the network as hidden may be a "
"privacy issue for you (in infrastructure mode) or client stations (in AP "
"mode), as the explicit probe-scans are distinctly recognizable on the air."
msgstr ""

#: ../clients/common/settings-docs.h.in:13
msgid ""
"If specified, this connection will only apply to the Wi-Fi device whose "
"permanent MAC address matches. This property does not change the MAC address "
"of the device (i.e. MAC spoofing)."
msgstr ""

#: ../clients/common/settings-docs.h.in:14
msgid ""
"A list of permanent MAC addresses of Wi-Fi devices to which this connection "
"should never apply.  Each MAC address should be given in the standard hex-"
"digits-and-colons notation (eg \"00:11:22:33:44:55\")."
msgstr ""

#: ../clients/common/settings-docs.h.in:15
msgid ""
"One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the "
"user has set a global default to randomize and the supplicant supports "
"randomization),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the "
"MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize "
"the MAC address). This property is deprecated for 'cloned-mac-address'. "
"Deprecated: 1"
msgstr ""

#: ../clients/common/settings-docs.h.in:16
msgid ""
"Wi-Fi network mode; one of \"infrastructure\", \"adhoc\" or \"ap\".  If "
"blank, infrastructure is assumed."
msgstr ""

#: ../clients/common/settings-docs.h.in:17
#: ../clients/common/settings-docs.h.in:94
msgid ""
"If non-zero, only transmit packets of the specified size or smaller, "
"breaking larger packets up into multiple Ethernet frames."
msgstr ""

#: ../clients/common/settings-docs.h.in:18
msgid ""
"One of NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2) (disable Wi-Fi power "
"saving), NM_SETTING_WIRELESS_POWERSAVE_ENABLE (3) (enable Wi-Fi power "
"saving), NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1) (don't touch currently "
"configure setting) or NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0) (use the "
"globally configured value). All other values are reserved."
msgstr ""

#: ../clients/common/settings-docs.h.in:19
msgid ""
"If non-zero, directs the device to only use the specified bitrate for "
"communication with the access point.  Units are in Kb/s, ie 5500 = 5.5 Mbit/"
"s.  This property is highly driver dependent and not all devices support "
"setting a static bitrate."
msgstr ""

#: ../clients/common/settings-docs.h.in:20
msgid ""
"A list of BSSIDs (each BSSID formatted as a MAC address like "
"\"00:11:22:33:44:55\") that have been detected as part of the Wi-Fi "
"network.  NetworkManager internally tracks previously seen BSSIDs. The "
"property is only meant for reading and reflects the BSSID list of "
"NetworkManager. The changes you make to this property will not be preserved."
msgstr ""

#: ../clients/common/settings-docs.h.in:21
msgid "SSID of the Wi-Fi network. Must be specified."
msgstr ""

#: ../clients/common/settings-docs.h.in:22
msgid ""
"If non-zero, directs the device to use the specified transmit power. Units "
"are dBm.  This property is highly driver dependent and not all devices "
"support setting a static transmit power."
msgstr ""

#: ../clients/common/settings-docs.h.in:23
msgid ""
"The NMSettingWirelessWakeOnWLan options to enable. Not all devices support "
"all options. May be any combination of NM_SETTING_WIRELESS_WAKE_ON_WLAN_ANY "
"(0x2), NM_SETTING_WIRELESS_WAKE_ON_WLAN_DISCONNECT (0x4), "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_MAGIC (0x8), "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_GTK_REKEY_FAILURE (0x10), "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_EAP_IDENTITY_REQUEST (0x20), "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_4WAY_HANDSHAKE (0x40), "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_RFKILL_RELEASE (0x80), "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_TCP (0x100) or the special values "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_DEFAULT (0x1) (to use global settings) and "
"NM_SETTING_WIRELESS_WAKE_ON_WLAN_IGNORE (0x8000) (to disable management of "
"Wake-on-LAN in NetworkManager)."
msgstr ""

#: ../clients/common/settings-docs.h.in:24
msgid ""
"When WEP is used (ie, key-mgmt = \"none\" or \"ieee8021x\") indicate the "
"802.11 authentication algorithm required by the AP here.  One of \"open\" "
"for Open System, \"shared\" for Shared Key, or \"leap\" for Cisco LEAP.  "
"When using Cisco LEAP (ie, key-mgmt = \"ieee8021x\" and auth-alg = \"leap\") "
"the \"leap-username\" and \"leap-password\" properties must be specified."
msgstr ""

#: ../clients/common/settings-docs.h.in:25
msgid ""
"Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the "
"connection.  One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use "
"global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) "
"(disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS "
"if the supplicant and the access point support it) or "
"NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not "
"supported).  When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and "
"no global default is set, FILS will be optionally enabled."
msgstr ""

#: ../clients/common/settings-docs.h.in:26
msgid ""
"A list of group/broadcast encryption algorithms which prevents connections "
"to Wi-Fi networks that do not utilize one of the algorithms in the list.  "
"For maximum compatibility leave this property empty.  Each list element may "
"be one of \"wep40\", \"wep104\", \"tkip\", or \"ccmp\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:27
msgid ""
"Key management used for the connection.  One of \"none\" (WEP), \"ieee8021x"
"\" (Dynamic WEP), \"wpa-none\" (Ad-Hoc WPA-PSK), \"wpa-psk\" (infrastructure "
"WPA-PSK), \"sae\" (SAE) or \"wpa-eap\" (WPA-Enterprise). This property must "
"be set for any Wi-Fi connection that uses security."
msgstr ""

#: ../clients/common/settings-docs.h.in:28
msgid ""
"The login password for legacy LEAP connections (ie, key-mgmt = \"ieee8021x\" "
"and auth-alg = \"leap\")."
msgstr ""

#: ../clients/common/settings-docs.h.in:29
msgid "Flags indicating how to handle the \"leap-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:30
msgid ""
"The login username for legacy LEAP connections (ie, key-mgmt = \"ieee8021x\" "
"and auth-alg = \"leap\")."
msgstr ""

#: ../clients/common/settings-docs.h.in:31
msgid ""
"A list of pairwise encryption algorithms which prevents connections to Wi-Fi "
"networks that do not utilize one of the algorithms in the list. For maximum "
"compatibility leave this property empty.  Each list element may be one of "
"\"tkip\" or \"ccmp\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:32
msgid ""
"Indicates whether Protected Management Frames (802.11w) must be enabled for "
"the connection.  One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) (use "
"global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE (1) (disable "
"PMF), NM_SETTING_WIRELESS_SECURITY_PMF_OPTIONAL (2) (enable PMF if the "
"supplicant and the access point support it) or "
"NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (3) (enable PMF and fail if not "
"supported).  When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) and no "
"global default is set, PMF will be optionally enabled."
msgstr ""

#: ../clients/common/settings-docs.h.in:33
msgid ""
"List of strings specifying the allowed WPA protocol versions to use. Each "
"element may be one \"wpa\" (allow WPA) or \"rsn\" (allow WPA2/RSN).  If not "
"specified, both WPA and RSN connections are allowed."
msgstr ""

#: ../clients/common/settings-docs.h.in:34
msgid ""
"Pre-Shared-Key for WPA networks. For WPA-PSK, it's either an ASCII "
"passphrase of 8 to 63 characters that is (as specified in the 802.11i "
"standard) hashed to derive the actual key, or the key in form of 64 "
"hexadecimal character. The WPA3-Personal networks use a passphrase of any "
"length for SAE authentication."
msgstr ""

#: ../clients/common/settings-docs.h.in:35
msgid "Flags indicating how to handle the \"psk\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:36
msgid ""
"Flags indicating how to handle the \"wep-key0\", \"wep-key1\", \"wep-key2\", "
"and \"wep-key3\" properties."
msgstr ""

#: ../clients/common/settings-docs.h.in:37
msgid ""
"Controls the interpretation of WEP keys.  Allowed values are "
"NM_WEP_KEY_TYPE_KEY (1), in which case the key is either a 10- or 26-"
"character hexadecimal string, or a 5- or 13-character ASCII password; or "
"NM_WEP_KEY_TYPE_PASSPHRASE (2), in which case the passphrase is provided as "
"a string and will be hashed using the de-facto MD5 method to derive the "
"actual WEP key."
msgstr ""

#: ../clients/common/settings-docs.h.in:38
msgid ""
"Index 0 WEP key.  This is the WEP key used in most networks.  See the \"wep-"
"key-type\" property for a description of how this key is interpreted."
msgstr ""

#: ../clients/common/settings-docs.h.in:39
msgid ""
"Index 1 WEP key.  This WEP index is not used by most networks.  See the "
"\"wep-key-type\" property for a description of how this key is interpreted."
msgstr ""

#: ../clients/common/settings-docs.h.in:40
msgid ""
"Index 2 WEP key.  This WEP index is not used by most networks.  See the "
"\"wep-key-type\" property for a description of how this key is interpreted."
msgstr ""

#: ../clients/common/settings-docs.h.in:41
msgid ""
"Index 3 WEP key.  This WEP index is not used by most networks.  See the "
"\"wep-key-type\" property for a description of how this key is interpreted."
msgstr ""

#: ../clients/common/settings-docs.h.in:42
msgid ""
"When static WEP is used (ie, key-mgmt = \"none\") and a non-default WEP key "
"index is used by the AP, put that WEP key index here.  Valid values are 0 "
"(default key) through 3.  Note that some consumer access points (like the "
"Linksys WRT54G) number the keys 1 - 4."
msgstr ""

#: ../clients/common/settings-docs.h.in:43
msgid ""
"Flags indicating which mode of WPS is to be used if any. There's little "
"point in changing the default setting as NetworkManager will automatically "
"determine whether it's feasible to start WPS enrollment from the Access "
"Point capabilities. WPS can be disabled by setting this property to a value "
"of 1."
msgstr ""

#: ../clients/common/settings-docs.h.in:44
msgid ""
"List of strings to be matched against the altSubjectName of the certificate "
"presented by the authentication server. If the list is empty, no "
"verification of the server certificate's altSubjectName is performed."
msgstr ""

#: ../clients/common/settings-docs.h.in:45
msgid ""
"Anonymous identity string for EAP authentication methods.  Used as the "
"unencrypted identity with EAP types that support different tunneled identity "
"like EAP-TTLS."
msgstr ""

#: ../clients/common/settings-docs.h.in:46
msgid ""
"A timeout for the authentication. Zero means the global default; if the "
"global default is not set, the authentication timeout is 25 seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:47
msgid ""
"Contains the CA certificate if used by the EAP method specified in the \"eap"
"\" property. Certificate data is specified using a \"scheme\"; two are "
"currently supported: blob and path. When using the blob scheme (which is "
"backwards compatible with NM 0.7.x) this property should be set to the "
"certificate's DER encoded data. When using the path scheme, this property "
"should be set to the full UTF-8 encoded path of the certificate, prefixed "
"with the string \"file://\" and ending with a terminating NUL byte. This "
"property can be unset even if the EAP method supports CA certificates, but "
"this allows man-in-the-middle attacks and is NOT recommended."
msgstr ""

#: ../clients/common/settings-docs.h.in:48
msgid ""
"The password used to access the CA certificate stored in \"ca-cert\" "
"property. Only makes sense if the certificate is stored on a PKCS#11 token "
"that requires a login."
msgstr ""

#: ../clients/common/settings-docs.h.in:49
msgid "Flags indicating how to handle the \"ca-cert-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:50
msgid ""
"UTF-8 encoded path to a directory containing PEM or DER formatted "
"certificates to be added to the verification chain in addition to the "
"certificate specified in the \"ca-cert\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:51
msgid ""
"Contains the client certificate if used by the EAP method specified in the "
"\"eap\" property. Certificate data is specified using a \"scheme\"; two are "
"currently supported: blob and path. When using the blob scheme (which is "
"backwards compatible with NM 0.7.x) this property should be set to the "
"certificate's DER encoded data. When using the path scheme, this property "
"should be set to the full UTF-8 encoded path of the certificate, prefixed "
"with the string \"file://\" and ending with a terminating NUL byte."
msgstr ""

#: ../clients/common/settings-docs.h.in:52
msgid ""
"The password used to access the client certificate stored in \"client-cert\" "
"property. Only makes sense if the certificate is stored on a PKCS#11 token "
"that requires a login."
msgstr ""

#: ../clients/common/settings-docs.h.in:53
msgid "Flags indicating how to handle the \"client-cert-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:54
msgid ""
"Constraint for server domain name. If set, this FQDN is used as a suffix "
"match requirement for dNSName element(s) of the certificate presented by the "
"authentication server.  If a matching dNSName is found, this constraint is "
"met.  If no dNSName values are present, this constraint is matched against "
"SubjectName CN using same suffix match comparison."
msgstr ""

#: ../clients/common/settings-docs.h.in:55
msgid ""
"The allowed EAP method to be used when authenticating to the network with "
"802.1x.  Valid methods are: \"leap\", \"md5\", \"tls\", \"peap\", \"ttls\", "
"\"pwd\", and \"fast\".  Each method requires different configuration using "
"the properties of this setting; refer to wpa_supplicant documentation for "
"the allowed combinations."
msgstr ""

#: ../clients/common/settings-docs.h.in:56
msgid ""
"Identity string for EAP authentication methods.  Often the user's user or "
"login name."
msgstr ""

#: ../clients/common/settings-docs.h.in:57
msgid "UTF-8 encoded file path containing PAC for EAP-FAST."
msgstr ""

#: ../clients/common/settings-docs.h.in:58
msgid ""
"UTF-8 encoded password used for EAP authentication methods. If both the "
"\"password\" property and the \"password-raw\" property are specified, "
"\"password\" is preferred."
msgstr ""

#: ../clients/common/settings-docs.h.in:59
#: ../clients/common/settings-docs.h.in:104
#: ../clients/common/settings-docs.h.in:131
#: ../clients/common/settings-docs.h.in:178
#: ../clients/common/settings-docs.h.in:290
msgid "Flags indicating how to handle the \"password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:60
msgid ""
"Password used for EAP authentication methods, given as a byte array to allow "
"passwords in other encodings than UTF-8 to be used. If both the \"password\" "
"property and the \"password-raw\" property are specified, \"password\" is "
"preferred."
msgstr ""

#: ../clients/common/settings-docs.h.in:61
msgid "Flags indicating how to handle the \"password-raw\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:62
msgid ""
"Specifies authentication flags to use in \"phase 1\" outer authentication "
"using NMSetting8021xAuthFlags options. The individual TLS versions can be "
"explicitly disabled. If a certain TLS disable flag is not set, it is up to "
"the supplicant to allow or forbid it. The TLS options map to "
"tls_disable_tlsv1_x settings. See the wpa_supplicant documentation for more "
"details."
msgstr ""

#: ../clients/common/settings-docs.h.in:63
msgid ""
"Enables or disables in-line provisioning of EAP-FAST credentials when FAST "
"is specified as the EAP method in the \"eap\" property. Recognized values "
"are \"0\" (disabled), \"1\" (allow unauthenticated provisioning), "
"\"2\" (allow authenticated provisioning), and \"3\" (allow both "
"authenticated and unauthenticated provisioning).  See the wpa_supplicant "
"documentation for more details."
msgstr ""

#: ../clients/common/settings-docs.h.in:64
msgid ""
"Forces use of the new PEAP label during key derivation.  Some RADIUS servers "
"may require forcing the new PEAP label to interoperate with PEAPv1.  Set to "
"\"1\" to force use of the new PEAP label.  See the wpa_supplicant "
"documentation for more details."
msgstr ""

#: ../clients/common/settings-docs.h.in:65
msgid ""
"Forces which PEAP version is used when PEAP is set as the EAP method in the "
"\"eap\" property.  When unset, the version reported by the server will be "
"used.  Sometimes when using older RADIUS servers, it is necessary to force "
"the client to use a particular PEAP version.  To do so, this property may be "
"set to \"0\" or \"1\" to force that specific PEAP version."
msgstr ""

#: ../clients/common/settings-docs.h.in:66
msgid ""
"List of strings to be matched against the altSubjectName of the certificate "
"presented by the authentication server during the inner \"phase 2\" "
"authentication. If the list is empty, no verification of the server "
"certificate's altSubjectName is performed."
msgstr ""

#: ../clients/common/settings-docs.h.in:67
msgid ""
"Specifies the allowed \"phase 2\" inner non-EAP authentication methods when "
"an EAP method that uses an inner TLS tunnel is specified in the \"eap\" "
"property.  Recognized non-EAP \"phase 2\" methods are \"pap\", \"chap\", "
"\"mschap\", \"mschapv2\", \"gtc\", \"otp\", \"md5\", and \"tls\". Each "
"\"phase 2\" inner method requires specific parameters for successful "
"authentication; see the wpa_supplicant documentation for more details."
msgstr ""

#: ../clients/common/settings-docs.h.in:68
msgid ""
"Specifies the allowed \"phase 2\" inner EAP-based authentication methods "
"when an EAP method that uses an inner TLS tunnel is specified in the \"eap\" "
"property.  Recognized EAP-based \"phase 2\" methods are \"md5\", "
"\"mschapv2\", \"otp\", \"gtc\", and \"tls\". Each \"phase 2\" inner method "
"requires specific parameters for successful authentication; see the "
"wpa_supplicant documentation for more details."
msgstr ""

#: ../clients/common/settings-docs.h.in:69
msgid ""
"Contains the \"phase 2\" CA certificate if used by the EAP method specified "
"in the \"phase2-auth\" or \"phase2-autheap\" properties. Certificate data is "
"specified using a \"scheme\"; two are currently supported: blob and path. "
"When using the blob scheme (which is backwards compatible with NM 0.7.x) "
"this property should be set to the certificate's DER encoded data. When "
"using the path scheme, this property should be set to the full UTF-8 encoded "
"path of the certificate, prefixed with the string \"file://\" and ending "
"with a terminating NUL byte. This property can be unset even if the EAP "
"method supports CA certificates, but this allows man-in-the-middle attacks "
"and is NOT recommended."
msgstr ""

#: ../clients/common/settings-docs.h.in:70
msgid ""
"The password used to access the \"phase2\" CA certificate stored in \"phase2-"
"ca-cert\" property. Only makes sense if the certificate is stored on a "
"PKCS#11 token that requires a login."
msgstr ""

#: ../clients/common/settings-docs.h.in:71
msgid ""
"Flags indicating how to handle the \"phase2-ca-cert-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:72
msgid ""
"UTF-8 encoded path to a directory containing PEM or DER formatted "
"certificates to be added to the verification chain in addition to the "
"certificate specified in the \"phase2-ca-cert\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:73
msgid ""
"Contains the \"phase 2\" client certificate if used by the EAP method "
"specified in the \"phase2-auth\" or \"phase2-autheap\" properties. "
"Certificate data is specified using a \"scheme\"; two are currently "
"supported: blob and path. When using the blob scheme (which is backwards "
"compatible with NM 0.7.x) this property should be set to the certificate's "
"DER encoded data. When using the path scheme, this property should be set to "
"the full UTF-8 encoded path of the certificate, prefixed with the string "
"\"file://\" and ending with a terminating NUL byte. This property can be "
"unset even if the EAP method supports CA certificates, but this allows man-"
"in-the-middle attacks and is NOT recommended."
msgstr ""

#: ../clients/common/settings-docs.h.in:74
msgid ""
"The password used to access the \"phase2\" client certificate stored in "
"\"phase2-client-cert\" property. Only makes sense if the certificate is "
"stored on a PKCS#11 token that requires a login."
msgstr ""

#: ../clients/common/settings-docs.h.in:75
msgid ""
"Flags indicating how to handle the \"phase2-client-cert-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:76
msgid ""
"Constraint for server domain name. If set, this FQDN is used as a suffix "
"match requirement for dNSName element(s) of the certificate presented by the "
"authentication server during the inner \"phase 2\" authentication.  If a "
"matching dNSName is found, this constraint is met.  If no dNSName values are "
"present, this constraint is matched against SubjectName CN using same suffix "
"match comparison."
msgstr ""

#: ../clients/common/settings-docs.h.in:77
msgid ""
"Contains the \"phase 2\" inner private key when the \"phase2-auth\" or "
"\"phase2-autheap\" property is set to \"tls\". Key data is specified using a "
"\"scheme\"; two are currently supported: blob and path. When using the blob "
"scheme and private keys, this property should be set to the key's encrypted "
"PEM encoded data. When using private keys with the path scheme, this "
"property should be set to the full UTF-8 encoded path of the key, prefixed "
"with the string \"file://\" and ending with a terminating NUL byte. When "
"using PKCS#12 format private keys and the blob scheme, this property should "
"be set to the PKCS#12 data and the \"phase2-private-key-password\" property "
"must be set to password used to decrypt the PKCS#12 certificate and key. "
"When using PKCS#12 files and the path scheme, this property should be set to "
"the full UTF-8 encoded path of the key, prefixed with the string \"file://\" "
"and ending with a terminating NUL byte, and as with the blob scheme the "
"\"phase2-private-key-password\" property must be set to the password used to "
"decode the PKCS#12 private key and certificate."
msgstr ""

#: ../clients/common/settings-docs.h.in:78
msgid ""
"The password used to decrypt the \"phase 2\" private key specified in the "
"\"phase2-private-key\" property when the private key either uses the path "
"scheme, or is a PKCS#12 format key."
msgstr ""

#: ../clients/common/settings-docs.h.in:79
msgid ""
"Flags indicating how to handle the \"phase2-private-key-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:80
msgid ""
"Substring to be matched against the subject of the certificate presented by "
"the authentication server during the inner \"phase 2\" authentication. When "
"unset, no verification of the authentication server certificate's subject is "
"performed.  This property provides little security, if any, and its use is "
"deprecated in favor of NMSetting8021x:phase2-domain-suffix-match."
msgstr ""

#: ../clients/common/settings-docs.h.in:81
msgid "PIN used for EAP authentication methods."
msgstr ""

#: ../clients/common/settings-docs.h.in:82
#: ../clients/common/settings-docs.h.in:180
msgid "Flags indicating how to handle the \"pin\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:83
msgid ""
"Contains the private key when the \"eap\" property is set to \"tls\". Key "
"data is specified using a \"scheme\"; two are currently supported: blob and "
"path. When using the blob scheme and private keys, this property should be "
"set to the key's encrypted PEM encoded data. When using private keys with "
"the path scheme, this property should be set to the full UTF-8 encoded path "
"of the key, prefixed with the string \"file://\" and ending with a "
"terminating NUL byte. When using PKCS#12 format private keys and the blob "
"scheme, this property should be set to the PKCS#12 data and the \"private-"
"key-password\" property must be set to password used to decrypt the PKCS#12 "
"certificate and key. When using PKCS#12 files and the path scheme, this "
"property should be set to the full UTF-8 encoded path of the key, prefixed "
"with the string \"file://\" and ending with a terminating NUL byte, and as "
"with the blob scheme the \"private-key-password\" property must be set to "
"the password used to decode the PKCS#12 private key and certificate. "
"WARNING: \"private-key\" is not a \"secret\" property, and thus unencrypted "
"private key data using the BLOB scheme may be readable by unprivileged "
"users.  Private keys should always be encrypted with a private key password "
"to prevent unauthorized access to unencrypted private key data."
msgstr ""

#: ../clients/common/settings-docs.h.in:84
msgid ""
"The password used to decrypt the private key specified in the \"private-key"
"\" property when the private key either uses the path scheme, or if the "
"private key is a PKCS#12 format key."
msgstr ""

#: ../clients/common/settings-docs.h.in:85
msgid "Flags indicating how to handle the \"private-key-password\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:86
msgid ""
"Substring to be matched against the subject of the certificate presented by "
"the authentication server. When unset, no verification of the authentication "
"server certificate's subject is performed.  This property provides little "
"security, if any, and its use is deprecated in favor of NMSetting8021x:"
"domain-suffix-match."
msgstr ""

#: ../clients/common/settings-docs.h.in:87
msgid ""
"When TRUE, overrides the \"ca-path\" and \"phase2-ca-path\" properties using "
"the system CA directory specified at configure time with the --system-ca-"
"path switch.  The certificates in this directory are added to the "
"verification chain in addition to any certificates specified by the \"ca-cert"
"\" and \"phase2-ca-cert\" properties. If the path provided with --system-ca-"
"path is rather a file name (bundle of trusted CA certificates), it overrides "
"\"ca-cert\" and \"phase2-ca-cert\" properties instead (sets ca_cert/ca_cert2 "
"options for wpa_supplicant)."
msgstr ""

#: ../clients/common/settings-docs.h.in:88
msgid ""
"When TRUE, enforce auto-negotiation of speed and duplex mode. If \"speed\" "
"and \"duplex\" properties are both specified, only that single mode will be "
"advertised and accepted during the link auto-negotiation process: this works "
"only for BASE-T 802.3 specifications and is useful for enforcing gigabits "
"modes, as in these cases link negotiation is mandatory. When FALSE, \"speed"
"\" and \"duplex\" properties should be both set or link configuration will "
"be skipped."
msgstr ""

#: ../clients/common/settings-docs.h.in:89
msgid ""
"If specified, request that the device use this MAC address instead. This is "
"known as MAC cloning or spoofing. Beside explicitly specifying a MAC "
"address, the special values \"preserve\", \"permanent\", \"random\" and "
"\"stable\" are supported. \"preserve\" means not to touch the MAC address on "
"activation. \"permanent\" means to use the permanent hardware address if the "
"device has one (otherwise this is treated as \"preserve\"). \"random\" "
"creates a random MAC address on each connect. \"stable\" creates a hashed "
"MAC address based on connection.stable-id and a machine dependent key. If "
"unspecified, the value can be overwritten via global defaults, see manual of "
"NetworkManager.conf. If still unspecified, it defaults to \"preserve"
"\" (older versions of NetworkManager may use a different default value). On "
"D-Bus, this field is expressed as \"assigned-mac-address\" or the deprecated "
"\"cloned-mac-address\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:90
msgid ""
"When a value is set, either \"half\" or \"full\", configures the device to "
"use the specified duplex mode. If \"auto-negotiate\" is \"yes\" the "
"specified duplex mode will be the only one advertised during link "
"negotiation: this works only for BASE-T 802.3 specifications and is useful "
"for enforcing gigabits modes, as in these cases link negotiation is "
"mandatory. If the value is unset (the default), the link configuration will "
"be either skipped (if \"auto-negotiate\" is \"no\", the default) or will be "
"auto-negotiated (if \"auto-negotiate\" is \"yes\") and the local device will "
"advertise all the supported duplex modes. Must be set together with the "
"\"speed\" property if specified. Before specifying a duplex mode be sure "
"your device supports it."
msgstr ""

#: ../clients/common/settings-docs.h.in:92
msgid ""
"If specified, this connection will only apply to the Ethernet device whose "
"permanent MAC address matches. This property does not change the MAC address "
"of the device (i.e. MAC spoofing)."
msgstr ""

#: ../clients/common/settings-docs.h.in:93
msgid ""
"If specified, this connection will never apply to the Ethernet device whose "
"permanent MAC address matches an address in the list.  Each MAC address is "
"in the standard hex-digits-and-colons notation (00:11:22:33:44:55)."
msgstr ""

#: ../clients/common/settings-docs.h.in:95
msgid ""
"Specific port type to use if the device supports multiple attachment "
"methods.  One of \"tp\" (Twisted Pair), \"aui\" (Attachment Unit Interface), "
"\"bnc\" (Thin Ethernet) or \"mii\" (Media Independent Interface). If the "
"device supports only one port type, this setting is ignored."
msgstr ""

#: ../clients/common/settings-docs.h.in:96
msgid ""
"s390 network device type; one of \"qeth\", \"lcs\", or \"ctc\", representing "
"the different types of virtual network devices available on s390 systems."
msgstr ""

#: ../clients/common/settings-docs.h.in:97
msgid ""
"Dictionary of key/value pairs of s390-specific device options.  Both keys "
"and values must be strings.  Allowed keys include \"portno\", \"layer2\", "
"\"portname\", \"protocol\", among others.  Key names must contain only "
"alphanumeric characters (ie, [a-zA-Z0-9])."
msgstr ""

#: ../clients/common/settings-docs.h.in:98
msgid ""
"Identifies specific subchannels that this network device uses for "
"communication with z/VM or s390 host.  Like the \"mac-address\" property for "
"non-z/VM devices, this property can be used to ensure this connection only "
"applies to the network device that uses these subchannels.  The list should "
"contain exactly 3 strings, and each string may only be composed of "
"hexadecimal characters and the period (.) character."
msgstr ""

#: ../clients/common/settings-docs.h.in:99
msgid ""
"When a value greater than 0 is set, configures the device to use the "
"specified speed. If \"auto-negotiate\" is \"yes\" the specified speed will "
"be the only one advertised during link negotiation: this works only for BASE-"
"T 802.3 specifications and is useful for enforcing gigabit speeds, as in "
"this case link negotiation is mandatory. If the value is unset (0, the "
"default), the link configuration will be either skipped (if \"auto-negotiate"
"\" is \"no\", the default) or will be auto-negotiated (if \"auto-negotiate\" "
"is \"yes\") and the local device will advertise all the supported speeds. In "
"Mbit/s, ie 100 == 100Mbit/s. Must be set together with the \"duplex\" "
"property when non-zero. Before specifying a speed value be sure your device "
"supports it."
msgstr ""

#: ../clients/common/settings-docs.h.in:100
msgid ""
"The NMSettingWiredWakeOnLan options to enable. Not all devices support all "
"options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), "
"NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), "
"NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), "
"NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), "
"NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC "
"(0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to "
"use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to "
"disable management of Wake-on-LAN in NetworkManager)."
msgstr ""

#: ../clients/common/settings-docs.h.in:101
msgid ""
"If specified, the password used with magic-packet-based Wake-on-LAN, "
"represented as an Ethernet MAC address.  If NULL, no password will be "
"required."
msgstr ""

#: ../clients/common/settings-docs.h.in:102
msgid "Encapsulation of ADSL connection.  Can be \"vcmux\" or \"llc\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:103
msgid "Password used to authenticate with the ADSL service."
msgstr ""

#: ../clients/common/settings-docs.h.in:105
msgid "ADSL connection protocol.  Can be \"pppoa\", \"pppoe\" or \"ipoatm\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:106
msgid "Username used to authenticate with the ADSL service."
msgstr ""

#: ../clients/common/settings-docs.h.in:107
msgid "VCI of ADSL connection"
msgstr ""

#: ../clients/common/settings-docs.h.in:108
msgid "VPI of ADSL connection"
msgstr ""

#: ../clients/common/settings-docs.h.in:109
msgid "The Bluetooth address of the device."
msgstr ""

#: ../clients/common/settings-docs.h.in:110
msgid ""
"Either \"dun\" for Dial-Up Networking connections or \"panu\" for Personal "
"Area Networking connections to devices supporting the NAP profile."
msgstr ""

#: ../clients/common/settings-docs.h.in:111
msgid ""
"Dictionary of key/value pairs of bonding options.  Both keys and values must "
"be strings. Option names must contain only alphanumeric characters (ie, [a-"
"zA-Z0-9])."
msgstr ""

#: ../clients/common/settings-docs.h.in:112
msgid "The Ethernet MAC address aging time, in seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:113
msgid "The Spanning Tree Protocol (STP) forwarding delay, in seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:114
msgid ""
"A mask of group addresses to forward. Usually, group addresses in the range "
"from 01:80:C2:00:00:00 to 01:80:C2:00:00:0F are not forwarded according to "
"standards. This property is a mask of 16 bits, each corresponding to a group "
"address in that range that must be forwarded. The mask can't have bits 0, 1 "
"or 2 set because they are used for STP, MAC pause frames and LACP."
msgstr ""

#: ../clients/common/settings-docs.h.in:115
msgid "The Spanning Tree Protocol (STP) hello time, in seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:116
msgid ""
"If specified, the MAC address of bridge. When creating a new bridge, this "
"MAC address will be set. If this field is left unspecified, the \"ethernet."
"cloned-mac-address\" is referred instead to generate the initial MAC "
"address. Note that setting \"ethernet.cloned-mac-address\" anyway overwrites "
"the MAC address of the bridge later while activating the bridge. Hence, this "
"property is deprecated. Deprecated: 1"
msgstr ""

#: ../clients/common/settings-docs.h.in:117
msgid "The Spanning Tree Protocol (STP) maximum message age, in seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:118
msgid ""
"Controls whether IGMP snooping is enabled for this bridge. Note that if "
"snooping was automatically disabled due to hash collisions, the system may "
"refuse to enable the feature until the collisions are resolved."
msgstr ""

#: ../clients/common/settings-docs.h.in:119
msgid ""
"Sets the Spanning Tree Protocol (STP) priority for this bridge.  Lower "
"values are \"better\"; the lowest priority bridge will be elected the root "
"bridge."
msgstr ""

#: ../clients/common/settings-docs.h.in:120
msgid ""
"Controls whether Spanning Tree Protocol (STP) is enabled for this bridge."
msgstr ""

#: ../clients/common/settings-docs.h.in:121
msgid ""
"The default PVID for the ports of the bridge, that is the VLAN id assigned "
"to incoming untagged frames."
msgstr ""

#: ../clients/common/settings-docs.h.in:122
msgid "Control whether VLAN filtering is enabled on the bridge."
msgstr ""

#: ../clients/common/settings-docs.h.in:123
msgid ""
"Array of bridge VLAN objects. In addition to the VLANs specified here, the "
"bridge will also have the default-pvid VLAN configured  by the bridge.vlan-"
"default-pvid property. In nmcli the VLAN list can be specified with the "
"following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where "
"$vid is either a single id between 1 and 4094 or a range, represented as a "
"couple of ids separated by a dash."
msgstr ""

#: ../clients/common/settings-docs.h.in:124
msgid ""
"Enables or disables \"hairpin mode\" for the port, which allows frames to be "
"sent back out through the port the frame was received on."
msgstr ""

#: ../clients/common/settings-docs.h.in:125
msgid ""
"The Spanning Tree Protocol (STP) port cost for destinations via this port."
msgstr ""

#: ../clients/common/settings-docs.h.in:126
msgid "The Spanning Tree Protocol (STP) priority of this bridge port."
msgstr ""

#: ../clients/common/settings-docs.h.in:127
msgid ""
"Array of bridge VLAN objects. In addition to the VLANs specified here, the "
"port will also have the default-pvid VLAN configured on the bridge by the "
"bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified "
"with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] "
"[untagged]]... where $vid is either a single id between 1 and 4094 or a "
"range, represented as a couple of ids separated by a dash."
msgstr ""

#: ../clients/common/settings-docs.h.in:128
#: ../clients/common/settings-docs.h.in:174
#: ../clients/common/settings-docs.h.in:185
msgid ""
"If non-zero, only transmit packets of the specified size or smaller, "
"breaking larger packets up into multiple frames."
msgstr ""

#: ../clients/common/settings-docs.h.in:129
msgid ""
"The number to dial to establish the connection to the CDMA-based mobile "
"broadband network, if any.  If not specified, the default number (#777) is "
"used when required."
msgstr ""

#: ../clients/common/settings-docs.h.in:130
#: ../clients/common/settings-docs.h.in:177
msgid ""
"The password used to authenticate with the network, if required.  Many "
"providers do not require a password, or accept any password.  But if a "
"password is required, it is specified here."
msgstr ""

#: ../clients/common/settings-docs.h.in:132
#: ../clients/common/settings-docs.h.in:183
msgid ""
"The username used to authenticate with the network, if required.  Many "
"providers do not require a username, or accept any username.  But if a "
"username is required, it is specified here."
msgstr ""

#: ../clients/common/settings-docs.h.in:133
msgid ""
"The number of retries for the authentication. Zero means to try "
"indefinitely; -1 means to use a global default. If the global default is not "
"set, the authentication retries for 3 times before failing the connection. "
"Currently this only applies to 802-1x authentication."
msgstr ""

#: ../clients/common/settings-docs.h.in:134
msgid ""
"Whether or not the connection should be automatically connected by "
"NetworkManager when the resources for the connection are available. TRUE to "
"automatically activate the connection, FALSE to require manual intervention "
"to activate the connection. Note that autoconnect is not implemented for VPN "
"profiles. See \"secondaries\" as an alternative to automatically connect VPN "
"profiles."
msgstr ""

#: ../clients/common/settings-docs.h.in:135
msgid ""
"The autoconnect priority. If the connection is set to autoconnect, "
"connections with higher priority will be preferred. Defaults to 0. The "
"higher number means higher priority."
msgstr ""

#: ../clients/common/settings-docs.h.in:136
msgid ""
"The number of times a connection should be tried when autoactivating before "
"giving up. Zero means forever, -1 means the global default (4 times if not "
"overridden). Setting this to 1 means to try activation only once before "
"blocking autoconnect. Note that after a timeout, NetworkManager will try to "
"autoconnect again."
msgstr ""

#: ../clients/common/settings-docs.h.in:137
msgid ""
"Whether or not slaves of this connection should be automatically brought up "
"when NetworkManager activates this connection. This only has a real effect "
"for master connections. The properties \"autoconnect\", \"autoconnect-"
"priority\" and \"autoconnect-retries\" are unrelated to this setting. The "
"permitted values are: 0: leave slave connections untouched, 1: activate all "
"the slave connections with this connection, -1: default. If -1 (default) is "
"set, global connection.autoconnect-slaves is read to determine the real "
"value. If it is default as well, this fallbacks to 0."
msgstr ""

#: ../clients/common/settings-docs.h.in:138
msgid ""
"If greater than zero, delay success of IP addressing until either the "
"timeout is reached, or an IP gateway replies to a ping."
msgstr ""

#: ../clients/common/settings-docs.h.in:139
msgid ""
"A human readable unique identifier for the connection, like \"Work Wi-Fi\" "
"or \"T-Mobile 3G\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:140
msgid ""
"The name of the network interface this connection is bound to. If not set, "
"then the connection can be attached to any interface of the appropriate type "
"(subject to restrictions imposed by other settings). For software devices "
"this specifies the name of the created device. For connection types where "
"interface names cannot easily be made persistent (e.g. mobile broadband or "
"USB Ethernet), this property should not be used. Setting this property "
"restricts the interfaces a connection can be used with, and if interface "
"names change or are reordered the connection may be applied to the wrong "
"interface."
msgstr ""

#: ../clients/common/settings-docs.h.in:141
msgid "Whether LLDP is enabled for the connection."
msgstr ""

#: ../clients/common/settings-docs.h.in:142
msgid ""
"Whether Link-Local Multicast Name Resolution (LLMNR) is enabled for the "
"connection. LLMNR is a protocol based on the Domain Name System (DNS) packet "
"format that allows both IPv4 and IPv6 hosts to perform name resolution for "
"hosts on the same local link. The permitted values are: yes: register "
"hostname and resolving for the connection, no: disable LLMNR for the "
"interface, resolve: do not register hostname but allow resolving of LLMNR "
"host names. This feature requires a plugin which supports LLMNR. One such "
"plugin is dns-systemd-resolved."
msgstr ""

#: ../clients/common/settings-docs.h.in:143
msgid "Interface name of the master device or UUID of the master connection."
msgstr ""

#: ../clients/common/settings-docs.h.in:144
msgid ""
"Whether mDNS is enabled for the connection. The permitted values are: yes: "
"register hostname and resolving for the connection, no: disable mDNS for the "
"interface, resolve: do not register hostname but allow resolving of mDNS "
"host names. This feature requires a plugin which supports mDNS. One such "
"plugin is dns-systemd-resolved."
msgstr ""

#: ../clients/common/settings-docs.h.in:145
msgid ""
"Whether the connection is metered. When updating this property on a "
"currently activated connection, the change takes effect immediately."
msgstr ""

#: ../clients/common/settings-docs.h.in:146
msgid ""
"Specifies whether the profile can be active multiple times at a particular "
"moment. The value is of type NMConnectionMultiConnect."
msgstr ""

#: ../clients/common/settings-docs.h.in:147
msgid ""
"An array of strings defining what access a given user has to this "
"connection.  If this is NULL or empty, all users are allowed to access this "
"connection; otherwise users are allowed if and only if they are in this "
"list.  When this is not empty, the connection can be active only when one of "
"the specified users is logged into an active session.  Each entry is of the "
"form \"[type]:[id]:[reserved]\"; for example, \"user:dcbw:blah\". At this "
"time only the \"user\" [type] is allowed.  Any other values are ignored and "
"reserved for future use.  [id] is the username that this permission refers "
"to, which may not contain the \":\" character. Any [reserved] information "
"present must be ignored and is reserved for future use.  All of [type], "
"[id], and [reserved] must be valid UTF-8."
msgstr ""

#: ../clients/common/settings-docs.h.in:148
msgid ""
"FALSE if the connection can be modified using the provided settings "
"service's D-Bus interface with the right privileges, or TRUE if the "
"connection is read-only and cannot be modified."
msgstr ""

#: ../clients/common/settings-docs.h.in:149
msgid ""
"List of connection UUIDs that should be activated when the base connection "
"itself is activated. Currently only VPN connections are supported."
msgstr ""

#: ../clients/common/settings-docs.h.in:150
msgid ""
"Setting name of the device type of this slave's master connection (eg, \"bond"
"\"), or NULL if this connection is not a slave."
msgstr ""

#: ../clients/common/settings-docs.h.in:151
msgid ""
"This represents the identity of the connection used for various purposes. It "
"allows to configure multiple profiles to share the identity. Also, the "
"stable-id can contain placeholders that are substituted dynamically and "
"deterministically depending on the context. The stable-id is used for "
"generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-"
"privacy. It is also used to seed the generated cloned MAC address for "
"ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is "
"also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to "
"derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that "
"depending on the context where it is used, other parameters are also seeded "
"into the generation algorithm. For example, a per-host key is commonly also "
"included, so that different systems end up generating different IDs. Or with "
"ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so "
"that different interfaces yield different addresses. The '$' character is "
"treated special to perform dynamic substitutions at runtime. Currently "
"supported are \"${CONNECTION}\", \"${DEVICE}\", \"${MAC}\", \"${BOOT}\", "
"\"${RANDOM}\". These effectively create unique IDs per-connection, per-"
"device, per-boot, or every time. Note that \"${DEVICE}\" corresponds to the "
"interface name of the device and \"${MAC}\" is the permanent MAC address of "
"the device. Any unrecognized patterns following '$' are treated verbatim, "
"however are reserved for future use. You are thus advised to avoid '$' or "
"escape it as \"$$\". For example, set it to \"${CONNECTION}-${BOOT}-"
"${DEVICE}\" to create a unique id for this connection that changes with "
"every reboot and differs depending on the interface where the profile "
"activates. If the value is unset, a global connection default is consulted. "
"If the value is still unset, the default is similar to \"${CONNECTION}\" and "
"uses a unique, fixed ID for the connection."
msgstr ""

#: ../clients/common/settings-docs.h.in:152
msgid ""
"The time, in seconds since the Unix Epoch, that the connection was last "
"_successfully_ fully activated. NetworkManager updates the connection "
"timestamp periodically when the connection is active to ensure that an "
"active connection has the latest timestamp. The property is only meant for "
"reading (changes to this property will not be preserved)."
msgstr ""

#: ../clients/common/settings-docs.h.in:153
msgid ""
"Base type of the connection. For hardware-dependent connections, should "
"contain the setting name of the hardware-type specific setting (ie, \"802-3-"
"ethernet\" or \"802-11-wireless\" or \"bluetooth\", etc), and for non-"
"hardware dependent connections like VPN or otherwise, should contain the "
"setting name of that setting type (ie, \"vpn\" or \"bridge\", etc)."
msgstr ""

#: ../clients/common/settings-docs.h.in:154
msgid ""
"A universally unique identifier for the connection, for example generated "
"with libuuid.  It should be assigned when the connection is created, and "
"never changed as long as the connection still applies to the same network.  "
"For example, it should not be changed when the \"id\" property or "
"NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi "
"SSID, mobile broadband network provider, or \"type\" property changes. The "
"UUID must be in the format \"2815492f-7e56-435e-b2e9-246bd7cdc664\" (ie, "
"contains only hexadecimal characters and \"-\")."
msgstr ""

#: ../clients/common/settings-docs.h.in:155
msgid ""
"The trust level of a the connection.  Free form case-insensitive string (for "
"example \"Home\", \"Work\", \"Public\").  NULL or unspecified zone means the "
"connection will be placed in the default zone as defined by the firewall. "
"When updating this property on a currently activated connection, the change "
"takes effect immediately."
msgstr ""

#: ../clients/common/settings-docs.h.in:156
msgid ""
"Specifies the NMSettingDcbFlags for the DCB FCoE application.  Flags may be "
"any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), "
"NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)."
msgstr ""

#: ../clients/common/settings-docs.h.in:157
msgid "The FCoE controller mode; either \"fabric\" (default) or \"vn2vn\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:158
msgid ""
"The highest User Priority (0 - 7) which FCoE frames should use, or -1 for "
"default priority.  Only used when the \"app-fcoe-flags\" property includes "
"the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag."
msgstr ""

#: ../clients/common/settings-docs.h.in:159
msgid ""
"Specifies the NMSettingDcbFlags for the DCB FIP application.  Flags may be "
"any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), "
"NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)."
msgstr ""

#: ../clients/common/settings-docs.h.in:160
msgid ""
"The highest User Priority (0 - 7) which FIP frames should use, or -1 for "
"default priority.  Only used when the \"app-fip-flags\" property includes "
"the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag."
msgstr ""

#: ../clients/common/settings-docs.h.in:161
msgid ""
"Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags may be "
"any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), "
"NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)."
msgstr ""

#: ../clients/common/settings-docs.h.in:162
msgid ""
"The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for "
"default priority. Only used when the \"app-iscsi-flags\" property includes "
"the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag."
msgstr ""

#: ../clients/common/settings-docs.h.in:163
msgid ""
"An array of 8 uint values, where the array index corresponds to the User "
"Priority (0 - 7) and the value indicates the percentage of bandwidth of the "
"priority's assigned group that the priority may use.  The sum of all "
"percentages for priorities which belong to the same group must total 100 "
"percents."
msgstr ""

#: ../clients/common/settings-docs.h.in:164
msgid ""
"An array of 8 boolean values, where the array index corresponds to the User "
"Priority (0 - 7) and the value indicates whether or not the corresponding "
"priority should transmit priority pause."
msgstr ""

#: ../clients/common/settings-docs.h.in:165
msgid ""
"Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags "
"may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), "
"NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)."
msgstr ""

#: ../clients/common/settings-docs.h.in:166
msgid ""
"An array of 8 uint values, where the array index corresponds to the Priority "
"Group ID (0 - 7) and the value indicates the percentage of link bandwidth "
"allocated to that group.  Allowed values are 0 - 100, and the sum of all "
"values must total 100 percents."
msgstr ""

#: ../clients/common/settings-docs.h.in:167
msgid ""
"Specifies the NMSettingDcbFlags for DCB Priority Groups.  Flags may be any "
"combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), "
"NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)."
msgstr ""

#: ../clients/common/settings-docs.h.in:168
msgid ""
"An array of 8 uint values, where the array index corresponds to the User "
"Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed "
"Priority Group ID values are 0 - 7 or 15 for the unrestricted group."
msgstr ""

#: ../clients/common/settings-docs.h.in:169
msgid ""
"An array of 8 boolean values, where the array index corresponds to the User "
"Priority (0 - 7) and the value indicates whether or not the priority may use "
"all of the bandwidth allocated to its assigned group."
msgstr ""

#: ../clients/common/settings-docs.h.in:170
msgid ""
"An array of 8 uint values, where the array index corresponds to the User "
"Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which "
"the priority is mapped."
msgstr ""

#: ../clients/common/settings-docs.h.in:171
msgid ""
"The GPRS Access Point Name specifying the APN used when establishing a data "
"session with the GSM-based network.  The APN often determines how the user "
"will be billed for their network usage and whether the user has access to "
"the Internet or just a provider-specific walled-garden, so it is important "
"to use the correct APN for the user's mobile broadband plan. The APN may "
"only be composed of the characters a-z, 0-9, ., and - per GSM 03.60 Section "
"14.9."
msgstr ""

#: ../clients/common/settings-docs.h.in:172
msgid ""
"The device unique identifier (as given by the WWAN management service) which "
"this connection applies to.  If given, the connection will only apply to the "
"specified device."
msgstr ""

#: ../clients/common/settings-docs.h.in:173
msgid ""
"When TRUE, only connections to the home network will be allowed. Connections "
"to roaming networks will not be made."
msgstr ""

#: ../clients/common/settings-docs.h.in:175
msgid ""
"The Network ID (GSM LAI format, ie MCC-MNC) to force specific network "
"registration.  If the Network ID is specified, NetworkManager will attempt "
"to force the device to register only on the specified network. This can be "
"used to ensure that the device does not roam when direct roaming control of "
"the device is not otherwise possible."
msgstr ""

#: ../clients/common/settings-docs.h.in:176
msgid ""
"Legacy setting that used to help establishing PPP data sessions for GSM-"
"based modems. Deprecated: 1"
msgstr ""

#: ../clients/common/settings-docs.h.in:179
msgid ""
"If the SIM is locked with a PIN it must be unlocked before any other "
"operations are requested.  Specify the PIN here to allow operation of the "
"device."
msgstr ""

#: ../clients/common/settings-docs.h.in:181
msgid ""
"The SIM card unique identifier (as given by the WWAN management service) "
"which this connection applies to.  If given, the connection will apply to "
"any device also allowed by \"device-id\" which contains a SIM card matching "
"the given identifier."
msgstr ""

#: ../clients/common/settings-docs.h.in:182
msgid ""
"A MCC/MNC string like \"310260\" or \"21601\" identifying the specific "
"mobile network operator which this connection applies to.  If given, the "
"connection will apply to any device also allowed by \"device-id\" and \"sim-"
"id\" which contains a SIM card provisioned by the given operator."
msgstr ""

#: ../clients/common/settings-docs.h.in:184
msgid ""
"If specified, this connection will only apply to the IPoIB device whose "
"permanent MAC address matches. This property does not change the MAC address "
"of the device (i.e. MAC spoofing)."
msgstr ""

#: ../clients/common/settings-docs.h.in:186
msgid ""
"The InfiniBand P_Key to use for this device. A value of -1 means to use the "
"default P_Key (aka \"the P_Key at index 0\").  Otherwise it is a 16-bit "
"unsigned integer, whose high bit is set if it is a \"full membership\" P_Key."
msgstr ""

#: ../clients/common/settings-docs.h.in:187
msgid ""
"The interface name of the parent device of this device. Normally NULL, but "
"if the \"p_key\" property is set, then you must specify the base device by "
"setting either this property or \"mac-address\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:188
msgid ""
"The IP-over-InfiniBand transport mode. Either \"datagram\" or \"connected\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:189
msgid ""
"How many additional levels of encapsulation are permitted to be prepended to "
"packets. This property applies only to IPv6 tunnels."
msgstr ""

#: ../clients/common/settings-docs.h.in:190
msgid ""
"Tunnel flags. Currently the following values are supported: "
"NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), "
"NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), "
"NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), "
"NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY "
"(0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only "
"for IPv6 tunnels."
msgstr ""

#: ../clients/common/settings-docs.h.in:191
msgid ""
"The flow label to assign to tunnel packets. This property applies only to "
"IPv6 tunnels."
msgstr ""

#: ../clients/common/settings-docs.h.in:192
msgid ""
"The key used for tunnel input packets; the property is valid only for "
"certain tunnel modes (GRE, IP6GRE). If empty, no key is used."
msgstr ""

#: ../clients/common/settings-docs.h.in:193
msgid ""
"The local endpoint of the tunnel; the value can be empty, otherwise it must "
"contain an IPv4 or IPv6 address."
msgstr ""

#: ../clients/common/settings-docs.h.in:194
msgid ""
"The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or "
"NM_IP_TUNNEL_MODE_GRE (2)."
msgstr ""

#: ../clients/common/settings-docs.h.in:195
msgid ""
"If non-zero, only transmit packets of the specified size or smaller, "
"breaking larger packets up into multiple fragments."
msgstr ""

#: ../clients/common/settings-docs.h.in:196
msgid ""
"The key used for tunnel output packets; the property is valid only for "
"certain tunnel modes (GRE, IP6GRE). If empty, no key is used."
msgstr ""

#: ../clients/common/settings-docs.h.in:197
msgid ""
"If given, specifies the parent interface name or parent connection UUID the "
"new device will be bound to so that tunneled packets will only be routed via "
"that interface."
msgstr ""

#: ../clients/common/settings-docs.h.in:198
msgid "Whether to enable Path MTU Discovery on this tunnel."
msgstr ""

#: ../clients/common/settings-docs.h.in:199
msgid ""
"The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 "
"address."
msgstr ""

#: ../clients/common/settings-docs.h.in:200
msgid ""
"The type of service (IPv4) or traffic class (IPv6) field to be set on "
"tunneled packets."
msgstr ""

#: ../clients/common/settings-docs.h.in:201
msgid ""
"The TTL to assign to tunneled packets. 0 is a special value meaning that "
"packets inherit the TTL value."
msgstr ""

#: ../clients/common/settings-docs.h.in:202
#: ../clients/common/settings-docs.h.in:223
msgid "Array of IP addresses."
msgstr ""

#: ../clients/common/settings-docs.h.in:203
#: ../clients/common/settings-docs.h.in:224
msgid ""
"Timeout in milliseconds used to check for the presence of duplicate IP "
"addresses on the network.  If an address conflict is detected, the "
"activation will fail.  A zero value means that no duplicate address "
"detection is performed, -1 means the default value (either configuration "
"ipvx.dad-timeout override or zero).  A value greater than zero is a timeout "
"in milliseconds. The property is currently implemented only for IPv4."
msgstr ""

#: ../clients/common/settings-docs.h.in:204
msgid ""
"A string sent to the DHCP server to identify the local machine which the "
"DHCP server may use to customize the DHCP lease and options. When the "
"property is a hex string ('aa:bb:cc') it is interpreted as a binary client "
"ID, in which case the first byte is assumed to be the 'type' field as per "
"RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e."
"g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a "
"MAC address). If the property is not a hex string it is considered as a non-"
"hardware-address client ID and the 'type' field is set to 0. The special "
"values \"mac\" and \"perm-mac\" are supported, which use the current or "
"permanent MAC address of the device to generate a client identifier with "
"type ethernet (01). Currently, these options only work for ethernet type of "
"links. The special value \"duid\" generates a RFC4361-compliant client "
"identifier based on a hash of the interface name as IAID and /etc/machine-"
"id. The special value \"stable\" is supported to generate a type 0 client "
"identifier based on the stable-id (see connection.stable-id) and a per-host "
"key. If you set the stable-id, you may want to include the \"${DEVICE}\" or "
"\"${MAC}\" specifier to get a per-device key. If unset, a globally "
"configured default is used. If still unset, the default depends on the DHCP "
"plugin."
msgstr ""

#: ../clients/common/settings-docs.h.in:205
msgid ""
"If the \"dhcp-send-hostname\" property is TRUE, then the specified FQDN will "
"be sent to the DHCP server when acquiring a lease. This property and \"dhcp-"
"hostname\" are mutually exclusive and cannot be set at the same time."
msgstr ""

#: ../clients/common/settings-docs.h.in:206
#: ../clients/common/settings-docs.h.in:226
msgid ""
"If the \"dhcp-send-hostname\" property is TRUE, then the specified name will "
"be sent to the DHCP server when acquiring a lease. This property and \"dhcp-"
"fqdn\" are mutually exclusive and cannot be set at the same time."
msgstr ""

#: ../clients/common/settings-docs.h.in:207
#: ../clients/common/settings-docs.h.in:227
msgid ""
"If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some "
"DHCP servers use this hostname to update DNS databases, essentially "
"providing a static hostname for the computer.  If the \"dhcp-hostname\" "
"property is NULL and this property is TRUE, the current persistent hostname "
"of the computer is sent."
msgstr ""

#: ../clients/common/settings-docs.h.in:208
#: ../clients/common/settings-docs.h.in:228
msgid "A timeout for a DHCP transaction in seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:209
#: ../clients/common/settings-docs.h.in:229
msgid "Array of IP addresses of DNS servers."
msgstr ""

#: ../clients/common/settings-docs.h.in:210
#: ../clients/common/settings-docs.h.in:230
msgid ""
"Array of DNS options as described in man 5 resolv.conf. NULL means that the "
"options are unset and left at the default. In this case NetworkManager will "
"use default options. This is distinct from an empty list of properties."
msgstr ""

#: ../clients/common/settings-docs.h.in:211
#: ../clients/common/settings-docs.h.in:231
msgid ""
"DNS servers priority. The relative priority for DNS servers specified by "
"this setting.  A lower value is better (higher priority). Zero selects a "
"globally configured default value. If the latter is missing or zero too, it "
"defaults to 50 for VPNs and 100 for other connections. Note that the "
"priority is to order DNS settings for multiple active connections.  It does "
"not disambiguate multiple DNS servers within the same connection profile. "
"When using dns=default, servers with higher priority will be on top of "
"resolv.conf.  To prioritize a given server over another one within the same "
"connection, just specify them in the desired order.  When multiple devices "
"have configurations with the same priority, the one with an active default "
"route will be preferred.  Negative values have the special effect of "
"excluding other configurations with a greater priority value; so in presence "
"of at least a negative priority, only DNS servers from connections with the "
"lowest priority value will be used. When using a DNS resolver that supports "
"Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each "
"connection is used to query domains in its search list.  Queries for domains "
"not present in any search list are routed through connections having the "
"'~.' special wildcard domain, which is added automatically to connections "
"with the default route (or can be added manually).  When multiple "
"connections specify the same domain, the one with the highest priority "
"(lowest numerical value) wins.  If a connection specifies a domain which is "
"subdomain of another domain with a negative DNS priority value, the "
"subdomain is ignored."
msgstr ""

#: ../clients/common/settings-docs.h.in:212
#: ../clients/common/settings-docs.h.in:232
msgid ""
"Array of DNS search domains. Domains starting with a tilde ('~') are "
"considered 'routing' domains and are used only to decide the interface over "
"which a query must be forwarded; they are not used to complete unqualified "
"host names."
msgstr ""

#: ../clients/common/settings-docs.h.in:213
#: ../clients/common/settings-docs.h.in:233
msgid ""
"The gateway associated with this configuration. This is only meaningful if "
"\"addresses\" is also set."
msgstr ""

#: ../clients/common/settings-docs.h.in:214
#: ../clients/common/settings-docs.h.in:234
msgid ""
"When \"method\" is set to \"auto\" and this property to TRUE, automatically "
"configured nameservers and search domains are ignored and only nameservers "
"and search domains specified in the \"dns\" and \"dns-search\" properties, "
"if any, are used."
msgstr ""

#: ../clients/common/settings-docs.h.in:215
#: ../clients/common/settings-docs.h.in:235
msgid ""
"When \"method\" is set to \"auto\" and this property to TRUE, automatically "
"configured routes are ignored and only routes specified in the \"routes\" "
"property, if any, are used."
msgstr ""

#: ../clients/common/settings-docs.h.in:216
#: ../clients/common/settings-docs.h.in:237
msgid ""
"If TRUE, allow overall network configuration to proceed even if the "
"configuration specified by this property times out.  Note that at least one "
"IP configuration must succeed or overall network configuration will still "
"fail.  For example, in IPv6-only networks, setting this property to TRUE on "
"the NMSettingIP4Config allows the overall network configuration to succeed "
"if IPv4 configuration fails but IPv6 configuration completes successfully."
msgstr ""

#: ../clients/common/settings-docs.h.in:217
#: ../clients/common/settings-docs.h.in:238
msgid ""
"IP configuration method. NMSettingIP4Config and NMSettingIP6Config both "
"support \"auto\", \"manual\", and \"link-local\". See the subclass-specific "
"documentation for other values. In general, for the \"auto\" method, "
"properties such as \"dns\" and \"routes\" specify information that is added "
"on to the information returned from automatic configuration.  The \"ignore-"
"auto-routes\" and \"ignore-auto-dns\" properties modify this behavior. For "
"methods that imply no upstream network, such as \"shared\" or \"link-local"
"\", these properties must be empty. For IPv4 method \"shared\", the IP "
"subnet can be configured by adding one manual IPv4 address or otherwise "
"10.42.x.0/24 is chosen. Note that the shared method must be configured on "
"the interface which shares the internet to a subnet, not on the uplink which "
"is shared."
msgstr ""

#: ../clients/common/settings-docs.h.in:218
#: ../clients/common/settings-docs.h.in:239
msgid ""
"If TRUE, this connection will never be the default connection for this IP "
"type, meaning it will never be assigned the default route by NetworkManager."
msgstr ""

#: ../clients/common/settings-docs.h.in:219
#: ../clients/common/settings-docs.h.in:240
msgid ""
"The default metric for routes that don't explicitly specify a metric. The "
"default value -1 means that the metric is chosen automatically based on the "
"device type. The metric applies to dynamic routes, manual (static) routes "
"that don't have an explicit metric setting, address prefix routes, and the "
"default route. Note that for IPv6, the kernel accepts zero (0) but coerces "
"it to 1024 (user default). Hence, setting this property to zero effectively "
"mean setting it to 1024. For IPv4, zero is a regular value for the metric."
msgstr ""

#: ../clients/common/settings-docs.h.in:220
#: ../clients/common/settings-docs.h.in:241
msgid ""
"Enable policy routing (source routing) and set the routing table used when "
"adding routes. This affects all routes, including device-routes, IPv4LL, "
"DHCP, SLAAC, default-routes and static routes. But note that static routes "
"can individually overwrite the setting by explicitly specifying a non-zero "
"routing table. If the table setting is left at zero, it is eligible to be "
"overwritten via global configuration. If the property is zero even after "
"applying the global configuration value, policy routing is disabled for the "
"address family of this connection. Policy routing disabled means that "
"NetworkManager will add all routes to the main table (except static routes "
"that explicitly configure a different table). Additionally, NetworkManager "
"will not delete any extraneous routes from tables except the main table. "
"This is to preserve backward compatibility for users who manage routing "
"tables outside of NetworkManager."
msgstr ""

#: ../clients/common/settings-docs.h.in:221
#: ../clients/common/settings-docs.h.in:242
msgid "Array of IP routes."
msgstr ""

#: ../clients/common/settings-docs.h.in:222
msgid ""
"Configure method for creating the address for use with RFC4862 IPv6 "
"Stateless Address Autoconfiguration. The permitted values are: "
"NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_EUI64 (0) or "
"NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_STABLE_PRIVACY (1). If the property is "
"set to EUI64, the addresses will be generated using the interface tokens "
"derived from hardware address. This makes the host part of the address to "
"stay constant, making it possible to track host's presence when it changes "
"networks. The address changes when the interface hardware is replaced. The "
"value of stable-privacy enables use of cryptographically secure hash of a "
"secret host-specific key along with the connection's stable-id and the "
"network address as specified by RFC7217. This makes it impossible to use the "
"address track host's presence, and makes the address stable when the network "
"interface hardware is replaced. On D-Bus, the absence of an addr-gen-mode "
"setting equals enabling stable-privacy. For keyfile plugin, the absence of "
"the setting on disk means EUI64 so that the property doesn't change on "
"upgrade from older versions. Note that this setting is distinct from the "
"Privacy Extensions as configured by \"ip6-privacy\" property and it does not "
"affect the temporary addresses configured with this option."
msgstr ""

#: ../clients/common/settings-docs.h.in:225
msgid ""
"A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp "
"client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried "
"in the Client Identifier option. If the property is a hex string ('aa:bb:"
"cc') it is interpreted as a binary DUID and filled as an opaque value in the "
"Client Identifier option. The special value \"lease\" will retrieve the DUID "
"previously used from the lease file belonging to the connection. If no DUID "
"is found and \"dhclient\" is the configured dhcp client, the DUID is "
"searched in the system-wide dhclient lease file. If still no DUID is found, "
"or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) "
"will be generated based on the machine-id. The special values \"llt\" and "
"\"ll\" will generate a DUID of type LLT or LL (see RFC 3315) based on the "
"current MAC address of the device. In order to try providing a stable DUID-"
"LLT, the time field will contain a constant timestamp that is used globally "
"(for all profiles) and persisted to disk. The special values \"stable-llt\", "
"\"stable-ll\" and \"stable-uuid\" will generate a DUID of the corresponding "
"type, derived from the connection's stable-id and a per-host unique key. You "
"may want to include the \"${DEVICE}\" or \"${MAC}\" specifier in the stable-"
"id, in case this profile gets activated on multiple devices. So, the link-"
"layer address of \"stable-ll\" and \"stable-llt\" will be a generated "
"address derived from the stable id. The DUID-LLT time value in the \"stable-"
"llt\" option will be picked among a static timespan of three years (the "
"upper bound of the interval is the same constant timestamp used in \"llt\"). "
"When the property is unset, the global value provided for \"ipv6.dhcp-duid\" "
"is used. If no global value is provided, the default \"lease\" value is "
"assumed."
msgstr ""

#: ../clients/common/settings-docs.h.in:236
msgid ""
"Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941.  If "
"enabled, it makes the kernel generate a temporary IPv6 address in addition "
"to the public one generated from MAC address via modified EUI-64.  This "
"enhances privacy, but could cause problems in some applications, on the "
"other hand.  The permitted values are: -1: unknown, 0: disabled, 1: enabled "
"(prefer public address), 2: enabled (prefer temporary addresses). Having a "
"per-connection setting set to \"-1\" (unknown) means fallback to global "
"configuration \"ipv6.ip6-privacy\". If also global configuration is "
"unspecified or set to \"-1\", fallback to read \"/proc/sys/net/ipv6/conf/"
"default/use_tempaddr\". Note that this setting is distinct from the Stable "
"Privacy addresses that can be enabled with the \"addr-gen-mode\" property's "
"\"stable-privacy\" setting as another way of avoiding host tracking with "
"IPv6 addresses."
msgstr ""

#: ../clients/common/settings-docs.h.in:243
msgid ""
"Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 "
"tokenized interface identifiers. Useful with eui64 addr-gen-mode."
msgstr ""

#: ../clients/common/settings-docs.h.in:244
msgid "Whether the transmitted traffic must be encrypted."
msgstr ""

#: ../clients/common/settings-docs.h.in:245
msgid ""
"The pre-shared CAK (Connectivity Association Key) for MACsec Key Agreement."
msgstr ""

#: ../clients/common/settings-docs.h.in:246
msgid "Flags indicating how to handle the \"mka-cak\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:247
msgid ""
"The pre-shared CKN (Connectivity-association Key Name) for MACsec Key "
"Agreement."
msgstr ""

#: ../clients/common/settings-docs.h.in:248
msgid ""
"Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key "
"Agreement) is obtained."
msgstr ""

#: ../clients/common/settings-docs.h.in:249
msgid ""
"If given, specifies the parent interface name or parent connection UUID from "
"which this MACSEC interface should be created.  If this property is not "
"specified, the connection must contain an \"802-3-ethernet\" setting with a "
"\"mac-address\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:250
msgid ""
"The port component of the SCI (Secure Channel Identifier), between 1 and "
"65534."
msgstr ""

#: ../clients/common/settings-docs.h.in:251
msgid ""
"Specifies whether the SCI (Secure Channel Identifier) is included in every "
"packet."
msgstr ""

#: ../clients/common/settings-docs.h.in:252
msgid "Specifies the validation mode for incoming frames."
msgstr ""

#: ../clients/common/settings-docs.h.in:253
msgid ""
"The macvlan mode, which specifies the communication mechanism between "
"multiple macvlans on the same lower device."
msgstr ""

#: ../clients/common/settings-docs.h.in:254
msgid ""
"If given, specifies the parent interface name or parent connection UUID from "
"which this MAC-VLAN interface should be created.  If this property is not "
"specified, the connection must contain an \"802-3-ethernet\" setting with a "
"\"mac-address\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:255
msgid "Whether the interface should be put in promiscuous mode."
msgstr ""

#: ../clients/common/settings-docs.h.in:256
msgid "Whether the interface should be a MACVTAP."
msgstr ""

#: ../clients/common/settings-docs.h.in:257
msgid ""
"A list of interface names to match. Each element is a shell wildcard "
"pattern.  When an element is prefixed with exclamation mark (!) the "
"condition is inverted. A candidate interface name is considered matching "
"when both these conditions are satisfied: (a) any of the elements not "
"prefixed with '!' matches or there aren't such elements; (b) none of the "
"elements prefixed with '!' match."
msgstr ""

#: ../clients/common/settings-docs.h.in:258
msgid "The bridge failure mode. One of \"secure\", \"standalone\" or empty."
msgstr ""

#: ../clients/common/settings-docs.h.in:259
#, fuzzy
msgid "Enable or disable multicast snooping."
msgstr "तंत्र संजालन सक्रिय या निष्क्रिय करें"

#: ../clients/common/settings-docs.h.in:260
#, fuzzy
msgid "Enable or disable RSTP."
msgstr "Wi-Fi युक्तियाँ सक्रिय या निष्क्रिय करें"

#: ../clients/common/settings-docs.h.in:261
#, fuzzy
msgid "Enable or disable STP."
msgstr "Wi-Fi युक्तियाँ सक्रिय या निष्क्रिय करें"

#: ../clients/common/settings-docs.h.in:262
msgid "The interface type. Either \"internal\", or empty."
msgstr ""

#: ../clients/common/settings-docs.h.in:263
msgid ""
"Specifies the unicast destination IP address of a remote Open vSwitch bridge "
"port to connect to."
msgstr ""

#: ../clients/common/settings-docs.h.in:264
msgid "The time port must be inactive in order to be considered down."
msgstr ""

#: ../clients/common/settings-docs.h.in:265
msgid ""
"Bonding mode. One of \"active-backup\", \"balance-slb\", or \"balance-tcp\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:266
msgid "The time port must be active before it starts forwarding traffic."
msgstr ""

#: ../clients/common/settings-docs.h.in:267
msgid "LACP mode. One of \"active\", \"off\", or \"passive\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:268
msgid "The VLAN tag in the range 0-4095."
msgstr ""

#: ../clients/common/settings-docs.h.in:269
msgid ""
"The VLAN mode. One of \"access\", \"native-tagged\", \"native-untagged\", "
"\"trunk\" or unset."
msgstr ""

#: ../clients/common/settings-docs.h.in:270
msgid ""
"If non-zero, instruct pppd to set the serial port to the specified "
"baudrate.  This value should normally be left as 0 to automatically choose "
"the speed."
msgstr ""

#: ../clients/common/settings-docs.h.in:271
msgid ""
"If TRUE, specify that pppd should set the serial port to use hardware flow "
"control with RTS and CTS signals.  This value should normally be set to "
"FALSE."
msgstr ""

#: ../clients/common/settings-docs.h.in:272
msgid ""
"If non-zero, instruct pppd to presume the connection to the peer has failed "
"if the specified number of LCP echo-requests go unanswered by the peer.  The "
"\"lcp-echo-interval\" property must also be set to a non-zero value if this "
"property is used."
msgstr ""

#: ../clients/common/settings-docs.h.in:273
msgid ""
"If non-zero, instruct pppd to send an LCP echo-request frame to the peer "
"every n seconds (where n is the specified value).  Note that some PPP peers "
"will respond to echo requests and some will not, and it is not possible to "
"autodetect this."
msgstr ""

#: ../clients/common/settings-docs.h.in:274
msgid ""
"If TRUE, stateful MPPE is used.  See pppd documentation for more information "
"on stateful MPPE."
msgstr ""

#: ../clients/common/settings-docs.h.in:275
msgid ""
"If non-zero, instruct pppd to request that the peer send packets no larger "
"than the specified size.  If non-zero, the MRU should be between 128 and "
"16384."
msgstr ""

#: ../clients/common/settings-docs.h.in:276
msgid ""
"If non-zero, instruct pppd to send packets no larger than the specified size."
msgstr ""

#: ../clients/common/settings-docs.h.in:277
msgid "If TRUE, Van Jacobsen TCP header compression will not be requested."
msgstr ""

#: ../clients/common/settings-docs.h.in:278
msgid ""
"If TRUE, do not require the other side (usually the PPP server) to "
"authenticate itself to the client.  If FALSE, require authentication from "
"the remote side.  In almost all cases, this should be TRUE."
msgstr ""

#: ../clients/common/settings-docs.h.in:279
msgid "If TRUE, BSD compression will not be requested."
msgstr ""

#: ../clients/common/settings-docs.h.in:280
msgid "If TRUE, \"deflate\" compression will not be requested."
msgstr ""

#: ../clients/common/settings-docs.h.in:281
msgid "If TRUE, the CHAP authentication method will not be used."
msgstr ""

#: ../clients/common/settings-docs.h.in:282
msgid "If TRUE, the EAP authentication method will not be used."
msgstr ""

#: ../clients/common/settings-docs.h.in:283
msgid "If TRUE, the MSCHAP authentication method will not be used."
msgstr ""

#: ../clients/common/settings-docs.h.in:284
msgid "If TRUE, the MSCHAPv2 authentication method will not be used."
msgstr ""

#: ../clients/common/settings-docs.h.in:285
msgid "If TRUE, the PAP authentication method will not be used."
msgstr ""

#: ../clients/common/settings-docs.h.in:286
msgid ""
"If TRUE, MPPE (Microsoft Point-to-Point Encryption) will be required for the "
"PPP session.  If either 64-bit or 128-bit MPPE is not available the session "
"will fail.  Note that MPPE is not used on mobile broadband connections."
msgstr ""

#: ../clients/common/settings-docs.h.in:287
msgid ""
"If TRUE, 128-bit MPPE (Microsoft Point-to-Point Encryption) will be required "
"for the PPP session, and the \"require-mppe\" property must also be set to "
"TRUE.  If 128-bit MPPE is not available the session will fail."
msgstr ""

#: ../clients/common/settings-docs.h.in:288
msgid ""
"If given, specifies the parent interface name on which this PPPoE connection "
"should be created.  If this property is not specified, the connection is "
"activated on the interface specified in \"interface-name\" of "
"NMSettingConnection."
msgstr ""

#: ../clients/common/settings-docs.h.in:289
msgid "Password used to authenticate with the PPPoE service."
msgstr ""

#: ../clients/common/settings-docs.h.in:291
msgid ""
"If specified, instruct PPPoE to only initiate sessions with access "
"concentrators that provide the specified service.  For most providers, this "
"should be left blank.  It is only required if there are multiple access "
"concentrators or a specific service is known to be required."
msgstr ""

#: ../clients/common/settings-docs.h.in:292
msgid "Username used to authenticate with the PPPoE service."
msgstr ""

#: ../clients/common/settings-docs.h.in:293
msgid "Whether the proxy configuration is for browser only."
msgstr ""

#: ../clients/common/settings-docs.h.in:294
msgid ""
"Method for proxy configuration, Default is NM_SETTING_PROXY_METHOD_NONE (0)"
msgstr ""

#: ../clients/common/settings-docs.h.in:295
msgid "PAC script for the connection."
msgstr ""

#: ../clients/common/settings-docs.h.in:296
msgid "PAC URL for obtaining PAC file."
msgstr ""

#: ../clients/common/settings-docs.h.in:297
msgid ""
"Speed to use for communication over the serial port.  Note that this value "
"usually has no effect for mobile broadband modems as they generally ignore "
"speed settings and use the highest available speed."
msgstr ""

#: ../clients/common/settings-docs.h.in:298
msgid "Byte-width of the serial communication. The 8 in \"8n1\" for example."
msgstr ""

#: ../clients/common/settings-docs.h.in:299
msgid "Parity setting of the serial port."
msgstr ""

#: ../clients/common/settings-docs.h.in:300
msgid "Time to delay between each byte sent to the modem, in microseconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:301
msgid ""
"Number of stop bits for communication on the serial port.  Either 1 or 2. "
"The 1 in \"8n1\" for example."
msgstr ""

#: ../clients/common/settings-docs.h.in:302
msgid ""
"Whether to autoprobe virtual functions by a compatible driver. If set to "
"NM_TERNARY_TRUE (1), the kernel will try to bind VFs to a compatible driver "
"and if this succeeds a new network interface will be instantiated for each "
"VF. If set to NM_TERNARY_FALSE (0), VFs will not be claimed and no network "
"interfaces will be created for them. When set to NM_TERNARY_DEFAULT (-1), "
"the global default is used; in case the global default is unspecified it is "
"assumed to be NM_TERNARY_TRUE (1)."
msgstr ""

#: ../clients/common/settings-docs.h.in:303
msgid ""
"The total number of virtual functions to create. Note that when the sriov "
"setting is present NetworkManager enforces the number of virtual functions "
"on the interface also when it is zero. To prevent any changes to SR-IOV "
"parameters don't add a sriov setting to the connection."
msgstr ""

#: ../clients/common/settings-docs.h.in:304
msgid ""
"Array of virtual function descriptors. Each VF descriptor is a dictionary "
"mapping attribute names to GVariant values. The 'index' entry is mandatory "
"for each VF. When represented as string a VF is in the form: \"INDEX "
"[ATTR=VALUE[ ATTR=VALUE]...]\". for example: \"2 mac=00:11:22:33:44:55 spoof-"
"check=true\". Multiple VFs can be specified using a comma as separator. "
"Currently the following attributes are supported: mac, spoof-check, trust, "
"min-tx-rate, max-tx-rate, vlans. The \"vlans\" attribute is represented as a "
"semicolon-separated list of VLAN descriptors, where each descriptor has the "
"form \"ID[.PRIORITY[.PROTO]]\". PROTO can be either 'q' for 802.1Q (the "
"default) or 'ad' for 802.1ad."
msgstr ""

#: ../clients/common/settings-docs.h.in:305
msgid "Array of TC queueing disciplines."
msgstr ""

#: ../clients/common/settings-docs.h.in:306
msgid "Array of TC traffic filters."
msgstr ""

#: ../clients/common/settings-docs.h.in:307
msgid ""
"The JSON configuration for the team network interface.  The property should "
"contain raw JSON configuration data suitable for teamd, because the value is "
"passed directly to teamd. If not specified, the default configuration is "
"used.  See man teamd.conf for the format details."
msgstr ""

#: ../clients/common/settings-docs.h.in:308
#: ../clients/common/settings-docs.h.in:326
msgid ""
"Link watchers configuration for the connection: each link watcher is defined "
"by a dictionary, whose keys depend upon the selected link watcher. Available "
"link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified "
"in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-"
"up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-"
"max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', "
"'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man "
"for more details."
msgstr ""

#: ../clients/common/settings-docs.h.in:309
msgid "Corresponds to the teamd mcast_rejoin.count."
msgstr ""

#: ../clients/common/settings-docs.h.in:310
msgid "Corresponds to the teamd mcast_rejoin.interval."
msgstr ""

#: ../clients/common/settings-docs.h.in:311
msgid "Corresponds to the teamd notify_peers.count."
msgstr ""

#: ../clients/common/settings-docs.h.in:312
msgid "Corresponds to the teamd notify_peers.interval."
msgstr ""

#: ../clients/common/settings-docs.h.in:313
msgid ""
"Corresponds to the teamd runner.name. Permitted values are: \"roundrobin\", "
"\"broadcast\", \"activebackup\", \"loadbalance\", \"lacp\", \"random\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:314
msgid "Corresponds to the teamd runner.active."
msgstr ""

#: ../clients/common/settings-docs.h.in:315
msgid "Corresponds to the teamd runner.agg_select_policy."
msgstr ""

#: ../clients/common/settings-docs.h.in:316
msgid "Corresponds to the teamd runner.fast_rate."
msgstr ""

#: ../clients/common/settings-docs.h.in:317
msgid "Corresponds to the teamd runner.hwaddr_policy."
msgstr ""

#: ../clients/common/settings-docs.h.in:318
msgid "Corresponds to the teamd runner.min_ports."
msgstr ""

#: ../clients/common/settings-docs.h.in:319
msgid "Corresponds to the teamd runner.sys_prio."
msgstr ""

#: ../clients/common/settings-docs.h.in:320
msgid "Corresponds to the teamd runner.tx_balancer.name."
msgstr ""

#: ../clients/common/settings-docs.h.in:321
msgid "Corresponds to the teamd runner.tx_balancer.interval."
msgstr ""

#: ../clients/common/settings-docs.h.in:322
msgid "Corresponds to the teamd runner.tx_hash."
msgstr ""

#: ../clients/common/settings-docs.h.in:323
msgid ""
"The JSON configuration for the team port. The property should contain raw "
"JSON configuration data suitable for teamd, because the value is passed "
"directly to teamd. If not specified, the default configuration is used. See "
"man teamd.conf for the format details."
msgstr ""

#: ../clients/common/settings-docs.h.in:324
msgid "Corresponds to the teamd ports.PORTIFNAME.lacp_key."
msgstr ""

#: ../clients/common/settings-docs.h.in:325
msgid "Corresponds to the teamd ports.PORTIFNAME.lacp_prio."
msgstr ""

#: ../clients/common/settings-docs.h.in:327
msgid "Corresponds to the teamd ports.PORTIFNAME.prio."
msgstr ""

#: ../clients/common/settings-docs.h.in:328
msgid ""
"Corresponds to the teamd ports.PORTIFNAME.queue_id. When set to -1 means the "
"parameter is skipped from the json config."
msgstr ""

#: ../clients/common/settings-docs.h.in:329
msgid "Corresponds to the teamd ports.PORTIFNAME.sticky."
msgstr ""

#: ../clients/common/settings-docs.h.in:330
msgid ""
"The group ID which will own the device. If set to NULL everyone will be able "
"to use the device."
msgstr ""

#: ../clients/common/settings-docs.h.in:331
msgid ""
"The operating mode of the virtual device. Allowed values are "
"NM_SETTING_TUN_MODE_TUN (1) to create a layer 3 device and "
"NM_SETTING_TUN_MODE_TAP (2) to create an Ethernet-like layer 2 one."
msgstr ""

#: ../clients/common/settings-docs.h.in:332
msgid ""
"If the property is set to TRUE, the interface will support multiple file "
"descriptors (queues) to parallelize packet sending or receiving. Otherwise, "
"the interface will only support a single queue."
msgstr ""

#: ../clients/common/settings-docs.h.in:333
msgid ""
"The user ID which will own the device. If set to NULL everyone will be able "
"to use the device."
msgstr ""

#: ../clients/common/settings-docs.h.in:334
msgid ""
"If TRUE the interface will prepend a 4 byte header describing the physical "
"interface to the packets."
msgstr ""

#: ../clients/common/settings-docs.h.in:335
msgid ""
"If TRUE the IFF_VNET_HDR the tunnel packets will include a virtio network "
"header."
msgstr ""

#: ../clients/common/settings-docs.h.in:336
msgid ""
"A dictionary of key/value pairs with user data. This data is ignored by "
"NetworkManager and can be used at the users discretion. The keys only "
"support a strict ascii format, but the values can be arbitrary UTF8 strings "
"up to a certain length."
msgstr ""

#: ../clients/common/settings-docs.h.in:337
msgid ""
"For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p "
"priorities.  The mapping is given in the format \"from:to\" where both \"from"
"\" and \"to\" are unsigned integers, ie \"7:3\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:338
msgid ""
"One or more flags which control the behavior and features of the VLAN "
"interface.  Flags include NM_VLAN_FLAG_REORDER_HEADERS (0x1) (reordering of "
"output packet headers), NM_VLAN_FLAG_GVRP (0x2) (use of the GVRP protocol), "
"and NM_VLAN_FLAG_LOOSE_BINDING (0x4) (loose binding of the interface to its "
"master device's operating state). NM_VLAN_FLAG_MVRP (0x8) (use of the MVRP "
"protocol). The default value of this property is "
"NM_VLAN_FLAG_REORDER_HEADERS, but it used to be 0. To preserve backward "
"compatibility, the default-value in the D-Bus API continues to be 0 and a "
"missing property on D-Bus is still considered as 0."
msgstr ""

#: ../clients/common/settings-docs.h.in:339
msgid ""
"The VLAN identifier that the interface created by this connection should be "
"assigned. The valid range is from 0 to 4094, without the reserved id 4095."
msgstr ""

#: ../clients/common/settings-docs.h.in:340
msgid ""
"For incoming packets, a list of mappings from 802.1p priorities to Linux SKB "
"priorities.  The mapping is given in the format \"from:to\" where both \"from"
"\" and \"to\" are unsigned integers, ie \"7:3\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:341
msgid ""
"If given, specifies the parent interface name or parent connection UUID from "
"which this VLAN interface should be created.  If this property is not "
"specified, the connection must contain an \"802-3-ethernet\" setting with a "
"\"mac-address\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:342
msgid ""
"Dictionary of key/value pairs of VPN plugin specific data.  Both keys and "
"values must be strings."
msgstr ""

#: ../clients/common/settings-docs.h.in:343
msgid ""
"If the VPN service supports persistence, and this property is TRUE, the VPN "
"will attempt to stay connected across link changes and outages, until "
"explicitly disconnected."
msgstr ""

#: ../clients/common/settings-docs.h.in:344
msgid ""
"Dictionary of key/value pairs of VPN plugin specific secrets like passwords "
"or private keys.  Both keys and values must be strings."
msgstr ""

#: ../clients/common/settings-docs.h.in:345
msgid ""
"D-Bus service name of the VPN plugin that this setting uses to connect to "
"its network.  i.e. org.freedesktop.NetworkManager.vpnc for the vpnc plugin."
msgstr ""

#: ../clients/common/settings-docs.h.in:346
msgid ""
"Timeout for the VPN service to establish the connection. Some services may "
"take quite a long time to connect. Value of 0 means a default timeout, which "
"is 60 seconds (unless overridden by vpn.timeout in configuration file). "
"Values greater than zero mean timeout in seconds."
msgstr ""

#: ../clients/common/settings-docs.h.in:347
msgid ""
"If the VPN connection requires a user name for authentication, that name "
"should be provided here.  If the connection is available to more than one "
"user, and the VPN requires each user to supply a different name, then leave "
"this property empty.  If this property is empty, NetworkManager will "
"automatically supply the username of the user which requested the VPN "
"connection."
msgstr ""

#: ../clients/common/settings-docs.h.in:348
msgid "Specifies the lifetime in seconds of FDB entries learnt by the kernel."
msgstr ""

#: ../clients/common/settings-docs.h.in:349
msgid ""
"Specifies the UDP destination port to communicate to the remote VXLAN tunnel "
"endpoint."
msgstr ""

#: ../clients/common/settings-docs.h.in:350
msgid ""
"Specifies the VXLAN Network Identifier (or VXLAN Segment Identifier) to use."
msgstr ""

#: ../clients/common/settings-docs.h.in:351
msgid "Specifies whether netlink LL ADDR miss notifications are generated."
msgstr ""

#: ../clients/common/settings-docs.h.in:352
msgid "Specifies whether netlink IP ADDR miss notifications are generated."
msgstr ""

#: ../clients/common/settings-docs.h.in:353
msgid ""
"Specifies whether unknown source link layer addresses and IP addresses are "
"entered into the VXLAN device forwarding database."
msgstr ""

#: ../clients/common/settings-docs.h.in:354
msgid ""
"Specifies the maximum number of FDB entries. A value of zero means that the "
"kernel will store unlimited entries."
msgstr ""

#: ../clients/common/settings-docs.h.in:355
msgid "If given, specifies the source IP address to use in outgoing packets."
msgstr ""

#: ../clients/common/settings-docs.h.in:356
msgid ""
"If given, specifies the parent interface name or parent connection UUID."
msgstr ""

#: ../clients/common/settings-docs.h.in:357
msgid "Specifies whether ARP proxy is turned on."
msgstr ""

#: ../clients/common/settings-docs.h.in:358
msgid ""
"Specifies the unicast destination IP address to use in outgoing packets when "
"the destination link layer address is not known in the VXLAN device "
"forwarding database, or the multicast IP address to join."
msgstr ""

#: ../clients/common/settings-docs.h.in:359
msgid "Specifies whether route short circuit is turned on."
msgstr ""

#: ../clients/common/settings-docs.h.in:360
msgid ""
"Specifies the maximum UDP source port to communicate to the remote VXLAN "
"tunnel endpoint."
msgstr ""

#: ../clients/common/settings-docs.h.in:361
msgid ""
"Specifies the minimum UDP source port to communicate to the remote VXLAN "
"tunnel endpoint."
msgstr ""

#: ../clients/common/settings-docs.h.in:362
msgid "Specifies the TOS value to use in outgoing packets."
msgstr ""

#: ../clients/common/settings-docs.h.in:363
msgid "Specifies the time-to-live value to use in outgoing packets."
msgstr ""

#: ../clients/common/settings-docs.h.in:364
msgid ""
"The P2P device that should be connected to. Currently this is the only way "
"to create or join a group."
msgstr ""

#: ../clients/common/settings-docs.h.in:365
msgid ""
"The Wi-Fi Display (WFD) Information Elements (IEs) to set. Wi-Fi Display "
"requires a protocol specific information element to be set in certain Wi-Fi "
"frames. These can be specified here for the purpose of establishing a "
"connection. This setting is only useful when implementing a Wi-Fi Display "
"client."
msgstr ""

#: ../clients/common/settings-docs.h.in:366
msgid ""
"Flags indicating which mode of WPS is to be used. There's little point in "
"changing the default setting as NetworkManager will automatically determine "
"the best method to use."
msgstr ""

#: ../clients/common/settings-docs.h.in:367
msgid ""
"If specified, this connection will only apply to the WiMAX device whose MAC "
"address matches. This property does not change the MAC address of the device "
"(known as MAC spoofing). Deprecated: 1"
msgstr ""

#: ../clients/common/settings-docs.h.in:368
msgid ""
"Network Service Provider (NSP) name of the WiMAX network this connection "
"should use. Deprecated: 1"
msgstr ""

#: ../clients/common/settings-docs.h.in:369
msgid ""
"The use of fwmark is optional and is by default off. Setting it to 0 "
"disables it. Otherwise it is a 32-bit fwmark for outgoing packets."
msgstr ""

#: ../clients/common/settings-docs.h.in:370
msgid ""
"The listen-port. If listen-port is not specified, the port will be chosen "
"randomly when the interface comes up."
msgstr ""

#: ../clients/common/settings-docs.h.in:371
msgid ""
"If non-zero, only transmit packets of the specified size or smaller, "
"breaking larger packets up into multiple fragments. If zero a default MTU is "
"used. Note that contrary to wg-quick's MTU setting, this does not take into "
"account the current routes at the time of activation."
msgstr ""

#: ../clients/common/settings-docs.h.in:372
msgid ""
"Whether to automatically add routes for the AllowedIPs ranges of the peers. "
"If TRUE (the default), NetworkManager will automatically add routes in the "
"routing tables according to ipv4.route-table and ipv6.route-table. If FALSE, "
"no such routes are added automatically. In this case, the user may want to "
"configure static routes in ipv4.routes and ipv6.routes, respectively."
msgstr ""

#: ../clients/common/settings-docs.h.in:373
msgid "The 256 bit private-key in base64 encoding."
msgstr ""

#: ../clients/common/settings-docs.h.in:374
msgid "Flags indicating how to handle the \"private-key\" property."
msgstr ""

#: ../clients/common/settings-docs.h.in:375
msgid ""
"IEEE 802.15.4 channel. A positive integer or -1, meaning \"do not set, use "
"whatever the device is already set to\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:376
msgid ""
"If specified, this connection will only apply to the IEEE 802.15.4 (WPAN) "
"MAC layer device whose permanent MAC address matches."
msgstr ""

#: ../clients/common/settings-docs.h.in:377
msgid ""
"IEEE 802.15.4 channel page. A positive integer or -1, meaning \"do not set, "
"use whatever the device is already set to\"."
msgstr ""

#: ../clients/common/settings-docs.h.in:378
msgid "IEEE 802.15.4 Personal Area Network (PAN) identifier."
msgstr ""

#: ../clients/common/settings-docs.h.in:379
msgid "Short IEEE 802.15.4 address to be used within a restricted environment."
msgstr ""

#: ../clients/nm-online.c:90
msgid "Connecting"
msgstr "जुड़ रहा है"

#: ../clients/nm-online.c:206
#, fuzzy, c-format
msgid "Error: timeout creating NMClient object\n"
msgstr "त्रुटि: NMClient ऑब्जेक्ट नहीं बना सका: %s."

#: ../clients/nm-online.c:226
#, fuzzy, c-format
msgid "Error: Could not create NMClient object: %s\n"
msgstr "त्रुटि: NMClient ऑब्जेक्ट नहीं बना सका: %s."

#: ../clients/nm-online.c:252
msgid "Don't print anything"
msgstr "कुछ भी मुद्रित नहीं"

#: ../clients/nm-online.c:253
msgid "Wait for NetworkManager startup instead of a connection"
msgstr "NetworkManager के लिए प्रतीक्षा करें कनेक्शन बदले"

#: ../clients/nm-online.c:254
msgid ""
"Time to wait for a connection, in seconds (without the option, default value "
"is 30)"
msgstr "एक कनेक्शन के लिए प्रतीक्षा करें, सेकंड में समय (डिफ़ॉल्ट 30 है बिना विकल्प के)"

#: ../clients/nm-online.c:255
msgid "Exit immediately if NetworkManager is not running or connecting"
msgstr "तुरंत बाहर निकलें अगर नेटवर्कप्रबंधक चल रहा है या नहीं जोड़ने है"

#: ../clients/nm-online.c:275
msgid ""
"Waits for NetworkManager to finish activating startup network connections."
msgstr ""
"NetworkManager के लिए प्रतीक्षा करें संजाल करनेक्शन के आरंभन के लिए सक्रिय करने के लिए."

#: ../clients/nm-online.c:282 ../clients/nm-online.c:288
msgid "Invalid option.  Please use --help to see a list of valid options."
msgstr "अवैध विकल्प.  कृपया --help का उपयोग वैध विकल्प देने के लिए करें."

#: ../clients/tui/newt/nmt-newt-utils.c:176 ../clients/tui/nmt-editor.c:433
#: ../clients/tui/nmt-password-dialog.c:174
#: ../clients/tui/nmt-route-editor.c:122 ../clients/tui/nmtui-hostname.c:69
#: ../clients/tui/nmtui.c:134
msgid "OK"
msgstr "ठीक"

#: ../clients/tui/newt/nmt-newt-utils.c:324
#: ../clients/tui/newt/nmt-newt-utils.c:356
#, c-format
msgid "Could not create temporary file: %s"
msgstr "अस्थायी फ़ाइल नहीं बना सका: %s"

#: ../clients/tui/newt/nmt-newt-utils.c:362
#, c-format
msgid "Editor failed: %s"
msgstr "त्रुटि विफल: %s"

#: ../clients/tui/newt/nmt-newt-utils.c:368
#, c-format
msgid "Could not re-read file: %s"
msgstr "फ़ाइल फिर नहीं पढ़ सका: %s"

#: ../clients/tui/nm-editor-utils.c:144 ../libnm/nm-device.c:1380
msgid "Ethernet"
msgstr "ईथरनेट"

#: ../clients/tui/nm-editor-utils.c:148
#, c-format
msgid "Ethernet connection %d"
msgstr "तारयुक्त संबंधन %d "

#: ../clients/tui/nm-editor-utils.c:152 ../libnm/nm-device.c:1382
msgid "Wi-Fi"
msgstr "वाई-फाई"

#: ../clients/tui/nm-editor-utils.c:156
#, c-format
msgid "Wi-Fi connection %d"
msgstr "वाई - फाई संबंधन %d"

#: ../clients/tui/nm-editor-utils.c:161 ../libnm-core/nm-connection.c:2518
#: ../libnm/nm-device.c:1398
msgid "InfiniBand"
msgstr "InfiniBand"

#: ../clients/tui/nm-editor-utils.c:165
#, c-format
msgid "InfiniBand connection %d"
msgstr "InfiniBandकनेक्शन  %d"

#: ../clients/tui/nm-editor-utils.c:170 ../libnm/nm-device.c:1396
msgid "Mobile Broadband"
msgstr "मोबाइल ब्रॉडबैंड"

#: ../clients/tui/nm-editor-utils.c:173
#, c-format
msgid "Mobile broadband connection %d"
msgstr "मोबाइल ब्रॉडबैंड कनेक्शन %d"

#: ../clients/tui/nm-editor-utils.c:179 ../clients/tui/nmt-page-dsl.c:62
msgid "DSL"
msgstr "DSL"

#: ../clients/tui/nm-editor-utils.c:183
#, c-format
msgid "DSL connection %d"
msgstr "DSL कनेक्शन %d"

#: ../clients/tui/nm-editor-utils.c:188 ../libnm-core/nm-connection.c:2510
#: ../libnm/nm-device.c:1400
#: ../src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-reader.c:4898
msgid "Bond"
msgstr "बॉन्ड"

#: ../clients/tui/nm-editor-utils.c:192
#, c-format
msgid "Bond connection %d"
msgstr "बॉण्ड कनेक्शन %d"

#: ../clients/tui/nm-editor-utils.c:197 ../libnm-core/nm-connection.c:2514
#: ../libnm/nm-device.c:1404
#: ../src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-reader.c:5253
msgid "Bridge"
msgstr "पुल"

#: ../clients/tui/nm-editor-utils.c:202
#, c-format
msgid "Bridge connection %d"
msgstr "ब्रिज कनेक्शन %d"

#: ../clients/tui/nm-editor-utils.c:206 ../libnm-core/nm-connection.c:2512
#: ../libnm/nm-device.c:1402
#: ../src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-reader.c:4971
msgid "Team"
msgstr "टोली"

#: ../clients/tui/nm-editor-utils.c:211
#, c-format
msgid "Team connection %d"
msgstr "टीम कनेक्शन %d"

#: ../clients/tui/nm-editor-utils.c:215 ../clients/tui/nmt-page-vlan.c:82
#: ../libnm-core/nm-connection.c:2516 ../libnm/nm-device.c:1406
msgid "VLAN"
msgstr "VLAN"

#: ../clients/tui/nm-editor-utils.c:219
#, c-format
msgid "VLAN connection %d"
msgstr "VLAN कनेक्शन  %d"

#: ../clients/tui/nm-editor-utils.c:223 ../clients/tui/nmt-page-ip-tunnel.c:136
#, fuzzy
msgid "IP tunnel"
msgstr "PAN कनेक्शन"

#: ../clients/tui/nm-editor-utils.c:227
#, fuzzy, c-format
msgid "IP tunnel connection %d"
msgstr "PAN कनेक्शन"

#: ../clients/tui/nm-editor-utils.c:242
#, c-format
msgid "VPN connection %d"
msgstr "VPN संबंधन %d"

#: ../clients/tui/nmt-device-entry.c:368
msgid "Select..."
msgstr "चुनें..."

#: ../clients/tui/nmt-edit-connection-list.c:110
msgid "Add"
msgstr "जोड़ें"

#: ../clients/tui/nmt-edit-connection-list.c:113
#: ../clients/tui/nmt-page-ip4.c:169 ../clients/tui/nmt-page-ip6.c:167
#: ../clients/tui/nmt-page-team-port.c:109 ../clients/tui/nmt-page-team.c:173
msgid "Edit..."
msgstr "संपादन..."

#: ../clients/tui/nmt-edit-connection-list.c:116
#: ../clients/tui/nmtui-edit.c:529
msgid "Delete"
msgstr "मिटाएँ"

#: ../clients/tui/nmt-editor-section.c:103
msgid "Hide"
msgstr "छिपाएँ"

#: ../clients/tui/nmt-editor-section.c:103
msgid "Show"
msgstr "दिखाएँ"

#: ../clients/tui/nmt-editor.c:100
#, c-format
msgid "Could not create editor for connection '%s' of type '%s'."
msgstr "'%s' प्रकार के '%s' कनेक्शन के लिए संपादक नहीं बना सका."

#: ../clients/tui/nmt-editor.c:104
#, c-format
msgid "Could not create editor for invalid connection '%s'."
msgstr "अवैध कनेक्शन के लिए संपादक नहीं बना सका: '%s'."

#: ../clients/tui/nmt-editor.c:114
msgid "Edit Connection"
msgstr "कनेक्शन संपादित करें"

#: ../clients/tui/nmt-editor.c:175
#, c-format
msgid "Unable to save connection: %s"
msgstr "कनेक्शन सहेजने में असमर्थ: %s"

#: ../clients/tui/nmt-editor.c:189
#, c-format
msgid "Unable to add new connection: %s"
msgstr "नया कनेक्शन जोड़ने में असमर्थ: %s"

#: ../clients/tui/nmt-editor.c:336
msgid "Profile name"
msgstr "प्रोफ़ाइल नाम"

#: ../clients/tui/nmt-editor.c:347
#, fuzzy
msgid "Ethernet device"
msgstr "ईथरनेट"

#: ../clients/tui/nmt-editor.c:349
msgid "Device"
msgstr "युक्ति"

#. And finally the bottom widgets
#: ../clients/tui/nmt-editor.c:409
msgid "Automatically connect"
msgstr "स्वचालित कनेक्ट"

#: ../clients/tui/nmt-editor.c:415
msgid "Available to all users"
msgstr "सभी उपयोक्ता के लिए उपलब्ध"

#: ../clients/tui/nmt-editor.c:430 ../clients/tui/nmt-password-dialog.c:171
#: ../clients/tui/nmt-route-editor.c:115 ../clients/tui/nmtui-edit.c:220
#: ../clients/tui/nmtui-edit.c:528 ../clients/tui/nmtui-hostname.c:67
msgid "Cancel"
msgstr "रद्द करें"

#: ../clients/tui/nmt-mtu-entry.c:84
msgid "(default)"
msgstr "(तयशुदा)"

#: ../clients/tui/nmt-mtu-entry.c:86 ../clients/tui/nmt-mtu-entry.c:117
msgid "bytes"
msgstr "बाइट्स"

#: ../clients/tui/nmt-page-bond.c:85
msgid "Round-robin"
msgstr "राउण्ड रॉबिन"

#: ../clients/tui/nmt-page-bond.c:86
msgid "Active Backup"
msgstr "सक्रिय बैकअप"

#: ../clients/tui/nmt-page-bond.c:87
msgid "XOR"
msgstr "XOR"

#: ../clients/tui/nmt-page-bond.c:88
msgid "Broadcast"
msgstr "ब्रॉडकास्ट"

#: ../clients/tui/nmt-page-bond.c:89
msgid "802.3ad"
msgstr "802.3ad"

#: ../clients/tui/nmt-page-bond.c:90
msgid "Adaptive Transmit Load Balancing (tlb)"
msgstr "अनुकूली संचारित लोड संतुलन (tlb)"

#: ../clients/tui/nmt-page-bond.c:91
msgid "Adaptive Load Balancing (alb)"
msgstr "अनुकूली लोड संतुलन (alb)"

#: ../clients/tui/nmt-page-bond.c:97
msgid "MII (recommended)"
msgstr "MII (अनुशंसित)"

#: ../clients/tui/nmt-page-bond.c:98
msgid "ARP"
msgstr "ARP"

#: ../clients/tui/nmt-page-bond.c:359
msgid "BOND"
msgstr "बॉन्ड"

#: ../clients/tui/nmt-page-bond.c:363 ../clients/tui/nmt-page-bridge.c:85
#: ../clients/tui/nmt-page-team.c:152
msgid "Slaves"
msgstr "स्लेव"

#: ../clients/tui/nmt-page-bond.c:375 ../clients/tui/nmt-page-ip-tunnel.c:148
#: ../clients/tui/nmt-page-wifi.c:230
msgid "Mode"
msgstr "प्रकार"

#: ../clients/tui/nmt-page-bond.c:381
msgid "Primary"
msgstr "प्राथमिक"

#: ../clients/tui/nmt-page-bond.c:387
msgid "Link monitoring"
msgstr "कड़ी मॉनिटरिंग"

#: ../clients/tui/nmt-page-bond.c:393 ../clients/tui/nmt-page-bond.c:400
#: ../clients/tui/nmt-page-bond.c:407 ../clients/tui/nmt-page-bond.c:414
msgctxt "milliseconds"
msgid "ms"
msgstr "ms"

#: ../clients/tui/nmt-page-bond.c:394 ../clients/tui/nmt-page-bond.c:415
msgid "Monitoring frequency"
msgstr "मॉनिटरिंग आवृत्ति"

#: ../clients/tui/nmt-page-bond.c:401
msgid "Link up delay"
msgstr "लिंक अप विलंब"

#: ../clients/tui/nmt-page-bond.c:408
msgid "Link down delay"
msgstr "लिंक डाउन विलंब"

#: ../clients/tui/nmt-page-bond.c:421
msgid "ARP targets"
msgstr "ARP लक्ष्य"

#: ../clients/tui/nmt-page-bond.c:428 ../clients/tui/nmt-page-ethernet.c:77
#: ../clients/tui/nmt-page-vlan.c:110 ../clients/tui/nmt-page-wifi.c:364
msgid "Cloned MAC address"
msgstr "क्लोन MAC पता"

#: ../clients/tui/nmt-page-bridge-port.c:60
msgid "BRIDGE PORT"
msgstr "पुल पोर्ट"

#: ../clients/tui/nmt-page-bridge-port.c:67
#: ../clients/tui/nmt-page-bridge.c:118
msgid "Priority"
msgstr "प्राथमिकता"

#: ../clients/tui/nmt-page-bridge-port.c:73
msgid "Path cost"
msgstr "पथ लागत"

#: ../clients/tui/nmt-page-bridge-port.c:75
msgid "Hairpin mode"
msgstr "हेयरपिन प्रकार"

#: ../clients/tui/nmt-page-bridge.c:81
msgid "BRIDGE"
msgstr "पुल"

#: ../clients/tui/nmt-page-bridge.c:96 ../clients/tui/nmt-page-bridge.c:127
#: ../clients/tui/nmt-page-bridge.c:137 ../clients/tui/nmt-page-bridge.c:147
msgid "seconds"
msgstr "सेकण्ड"

#: ../clients/tui/nmt-page-bridge.c:97
msgid "Aging time"
msgstr "एजिंग समय"

#: ../clients/tui/nmt-page-bridge.c:99
#, fuzzy
msgid "Enable IGMP snooping"
msgstr "STP सक्रिय करें %s"

#: ../clients/tui/nmt-page-bridge.c:105
msgid "Enable STP (Spanning Tree Protocol)"
msgstr "सक्रिय करें एसटीपी (स्पैनिंग ट्री प्रोटोकॉल)"

#: ../clients/tui/nmt-page-bridge.c:128
msgid "Forward delay"
msgstr "अग्रेषित विलंब"

#: ../clients/tui/nmt-page-bridge.c:138
msgid "Hello time"
msgstr "हेलो समय"

#: ../clients/tui/nmt-page-bridge.c:148
msgid "Max age"
msgstr "अधिकतम आयु"

#: ../clients/tui/nmt-page-bridge.c:154
msgid "Group forward mask"
msgstr ""

#: ../clients/tui/nmt-page-ethernet.c:70
msgid "ETHERNET"
msgstr "ईथरनेट"

#: ../clients/tui/nmt-page-ethernet.c:83
#: ../clients/tui/nmt-page-infiniband.c:94
#: ../clients/tui/nmt-page-ip-tunnel.c:186 ../clients/tui/nmt-page-vlan.c:116
#: ../clients/tui/nmt-page-wifi.c:370
msgid "MTU"
msgstr "MTU"

#: ../clients/tui/nmt-page-infiniband.c:47
msgid "Datagram"
msgstr "आंकड़ारेख"

#: ../clients/tui/nmt-page-infiniband.c:48
msgid "Connected"
msgstr "कनेक्टेड"

#: ../clients/tui/nmt-page-infiniband.c:81
msgid "INFINIBAND"
msgstr "INFINIBAND"

#: ../clients/tui/nmt-page-infiniband.c:88
msgid "Transport mode"
msgstr "परिवहन अवस्था"

#: ../clients/tui/nmt-page-ip4.c:38
msgid "Disabled"
msgstr "अक्षम"

#: ../clients/tui/nmt-page-ip4.c:39 ../clients/tui/nmt-page-ip6.c:39
msgid "Automatic"
msgstr "स्वचालित"

#: ../clients/tui/nmt-page-ip4.c:40 ../clients/tui/nmt-page-ip6.c:41
msgid "Link-Local"
msgstr "लिंक स्थानीय"

#: ../clients/tui/nmt-page-ip4.c:41 ../clients/tui/nmt-page-ip6.c:42
msgid "Manual"
msgstr "हस्तचालित"

#: ../clients/tui/nmt-page-ip4.c:42
msgid "Shared"
msgstr "साझा"

#: ../clients/tui/nmt-page-ip4.c:82 ../clients/tui/nmt-page-ip6.c:82
msgid "(No custom routes)"
msgstr "(कोई पसंदीदा रूट नहीं)"

#: ../clients/tui/nmt-page-ip4.c:85 ../clients/tui/nmt-page-ip6.c:85
#, c-format
msgid "One custom route"
msgid_plural "%d custom routes"
msgstr[0] "एक मनपसंद रूट"
msgstr[1] "%d मनपसंद रूट"

#: ../clients/tui/nmt-page-ip4.c:128
msgid "IPv4 CONFIGURATION"
msgstr "आईपीवी 4 विन्यास"

#: ../clients/tui/nmt-page-ip4.c:136 ../clients/tui/nmt-page-ip6.c:136
msgid "Addresses"
msgstr "पता"

#: ../clients/tui/nmt-page-ip4.c:150 ../clients/tui/nmt-page-ip6.c:150
msgid "DNS servers"
msgstr "डीएनएस सर्वर"

#: ../clients/tui/nmt-page-ip4.c:156 ../clients/tui/nmt-page-ip6.c:156
msgid "Search domains"
msgstr "डोमेन खोजें"

#: ../clients/tui/nmt-page-ip4.c:171 ../clients/tui/nmt-page-ip6.c:169
msgid "Routing"
msgstr "रॉटिंग"

#: ../clients/tui/nmt-page-ip4.c:173 ../clients/tui/nmt-page-ip6.c:171
msgid "Never use this network for default route"
msgstr "तयशुदा मार्ग के लिए इस संजाल को कभी प्रयोग मत करें"

#: ../clients/tui/nmt-page-ip4.c:179 ../clients/tui/nmt-page-ip6.c:177
msgid "Ignore automatically obtained routes"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:185 ../clients/tui/nmt-page-ip6.c:183
msgid "Ignore automatically obtained DNS parameters"
msgstr ""

#: ../clients/tui/nmt-page-ip4.c:193
msgid "Require IPv4 addressing for this connection"
msgstr "इस कनेक्शन के पूरा होने के लिए IPv4 पता चाहिए"

#: ../clients/tui/nmt-page-ip6.c:38
msgid "Ignore"
msgstr "नज़रअंदाज़ करें"

#: ../clients/tui/nmt-page-ip6.c:40
msgid "Automatic (DHCP-only)"
msgstr "स्वचालित (केवल DHCP)"

#: ../clients/tui/nmt-page-ip6.c:128
msgid "IPv6 CONFIGURATION"
msgstr "आईपीवी 6 विन्यास"

#: ../clients/tui/nmt-page-ip6.c:191
msgid "Require IPv6 addressing for this connection"
msgstr "इस कनेक्शन के पूरा होने के लिए IPv6 पता चाहिए"

#. The order must match the NM_IP_TUNNEL_MODE_* enum
#: ../clients/tui/nmt-page-ip-tunnel.c:78
msgid "IPIP"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:79
msgid "GRE"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:80
msgid "SIT"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:81
msgid "ISATAP"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:82
msgid "VTI"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:83
msgid "IP6IP6"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:84
msgid "IPIP6"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:85
msgid "IP6GRE"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:86
msgid "VTI6"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:150 ../clients/tui/nmt-page-vlan.c:87
msgid "Parent"
msgstr "पैरेंट"

#: ../clients/tui/nmt-page-ip-tunnel.c:157
msgid "Local IP"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:163
#, fuzzy
msgid "Remote IP"
msgstr "हटाएँ"

#: ../clients/tui/nmt-page-ip-tunnel.c:169
msgid "Input key"
msgstr ""

#: ../clients/tui/nmt-page-ip-tunnel.c:176
msgid "Output key"
msgstr ""

#: ../clients/tui/nmt-page-ppp.c:131
msgid "PPP CONFIGURATION"
msgstr "पीपीपी विन्यास"

#: ../clients/tui/nmt-page-ppp.c:140
msgid "Allowed authentication methods:"
msgstr "प्रमाणीकरण विधि को अनुमति दें:"

#: ../clients/tui/nmt-page-ppp.c:147
msgid "EAP"
msgstr "EAP"

#: ../clients/tui/nmt-page-ppp.c:155
msgid "PAP"
msgstr "PAP"

#: ../clients/tui/nmt-page-ppp.c:163
msgid "CHAP"
msgstr "CHAP"

#: ../clients/tui/nmt-page-ppp.c:171
msgid "MSCHAPv2"
msgstr "MSCHAPv2"

#: ../clients/tui/nmt-page-ppp.c:179
msgid "MSCHAP"
msgstr "MSCHAP"

#: ../clients/tui/nmt-page-ppp.c:195
msgid "Use point-to-point encryption (MPPE)"
msgstr "बिंदु से बिंदु तक गोपन का उपयोग करें (MPPE)"

#: ../clients/tui/nmt-page-ppp.c:207
msgid "Require 128-bit encryption"
msgstr " 128-bit गोपन जरूरी"

#: ../clients/tui/nmt-page-ppp.c:217
msgid "Use stateful MPPE"
msgstr "स्टेटफुल MPPE का उपयोग करें"

#: ../clients/tui/nmt-page-ppp.c:229
msgid "Allow BSD data compression"
msgstr "BSD आँकड़ा संकुचन स्वीकारें"

#: ../clients/tui/nmt-page-ppp.c:237
msgid "Allow Deflate data compression"
msgstr "डिफ्लेट आँकड़ा संकुचन स्वीकारें"

#: ../clients/tui/nmt-page-ppp.c:245
msgid "Use TCP header compression"
msgstr "TCP शीर्षिका संकुचन का उपयोग करें"

#: ../clients/tui/nmt-page-ppp.c:255
msgid "Send PPP echo packets"
msgstr "PPP इको पैकेट भेजें"

#: ../clients/tui/nmt-page-team-port.c:92
msgid "TEAM PORT"
msgstr "टीम पोर्ट"

#: ../clients/tui/nmt-page-team-port.c:99 ../clients/tui/nmt-page-team.c:163
msgid "JSON configuration"
msgstr "JSON विन्यास"

#: ../clients/tui/nmt-page-team.c:145
msgid "TEAM"
msgstr "टोली"

#: ../clients/tui/nmt-page-vlan.c:102
msgid "VLAN id"
msgstr "VLAN ID"

#: ../clients/tui/nmt-page-wifi.c:64
msgctxt "Wi-Fi"
msgid "Client"
msgstr "क्लाइंट"

#: ../clients/tui/nmt-page-wifi.c:65
msgid "Access Point"
msgstr "पहुँच बिंदु"

#: ../clients/tui/nmt-page-wifi.c:66
msgid "Ad-Hoc Network"
msgstr "तदर्थ संजाल"

#: ../clients/tui/nmt-page-wifi.c:71
msgctxt "Wi-Fi"
msgid "Automatic"
msgstr "स्वचालित"

#. 802.11a Wi-Fi network
#: ../clients/tui/nmt-page-wifi.c:73
msgid "A (5 GHz)"
msgstr "A (5 GHz)"

#. 802.11b / 802.11g Wi-Fi network
#: ../clients/tui/nmt-page-wifi.c:75
msgid "B/G (2.4 GHz)"
msgstr "बी/जी (2.4 गीगा)"

#: ../clients/tui/nmt-page-wifi.c:80
msgctxt "Wi-Fi security"
msgid "None"
msgstr "कोई नहीं"

#: ../clients/tui/nmt-page-wifi.c:81
msgid "WPA & WPA2 Personal"
msgstr "WPA व WPA2 निजी"

#: ../clients/tui/nmt-page-wifi.c:82
msgid "WPA & WPA2 Enterprise"
msgstr "WPA व WPA2 एंटरप्राइज"

#: ../clients/tui/nmt-page-wifi.c:83
msgid "WEP 40/128-bit Key (Hex or ASCII)"
msgstr "WEP 40/128-बिट कुँजी (हेक्स या ASCII)"

#: ../clients/tui/nmt-page-wifi.c:84
msgid "WEP 128-bit Passphrase"
msgstr "WEP 128-bit पासफ्रेज"

#: ../clients/tui/nmt-page-wifi.c:85
msgid "Dynamic WEP (802.1x)"
msgstr "गतिशील WEP (802.1x)"

#: ../clients/tui/nmt-page-wifi.c:86
msgid "LEAP"
msgstr "LEAP"

#: ../clients/tui/nmt-page-wifi.c:91
msgctxt "WEP key index"
msgid "1 (Default)"
msgstr "1 (तयशुदा)"

#: ../clients/tui/nmt-page-wifi.c:92
msgctxt "WEP key index"
msgid "2"
msgstr "2"

#: ../clients/tui/nmt-page-wifi.c:93
msgctxt "WEP key index"
msgid "3"
msgstr "3"

#: ../clients/tui/nmt-page-wifi.c:94
msgctxt "WEP key index"
msgid "4"
msgstr "4"

#: ../clients/tui/nmt-page-wifi.c:99
msgid "Open System"
msgstr "खुला तंत्र"

#: ../clients/tui/nmt-page-wifi.c:100
msgid "Shared Key"
msgstr "साझा कुंजी"

#: ../clients/tui/nmt-page-wifi.c:214
msgid "WI-FI"
msgstr "वाई-फाई"

#: ../clients/tui/nmt-page-wifi.c:256
msgid "Channel"
msgstr "चैनल"

#: ../clients/tui/nmt-page-wifi.c:261
msgid "Security"
msgstr "सुरक्षा"

#. "wpa-enterprise"
#. FIXME
#: ../clients/tui/nmt-page-wifi.c:282
msgid "(No support for wpa-enterprise yet...)"
msgstr "(wpa-enterprise के लिए अबतक कोई समर्थन नहीं...)"

#: ../clients/tui/nmt-page-wifi.c:292 ../clients/tui/nmt-page-wifi.c:311
msgid "WEP index"
msgstr "WEP सूची"

#: ../clients/tui/nmt-page-wifi.c:300 ../clients/tui/nmt-page-wifi.c:319
msgid "Authentication"
msgstr "सत्यापन"

#. "dynamic-wep"
#. FIXME
#: ../clients/tui/nmt-page-wifi.c:325
msgid "(No support for dynamic-wep yet...)"
msgstr "(गतिशील-wep के लिए अबतक कोई समर्थन नहीं...)"

#: ../clients/tui/nmt-page-wifi.c:358
msgid "BSSID"
msgstr "BSSID"

#: ../clients/tui/nmt-password-fields.c:128
msgid "Ask for this password every time"
msgstr "इस कूटशब्द के लिए हर समय पूछें"

#: ../clients/tui/nmt-password-fields.c:129
msgid "Show password"
msgstr "कूटशब्द दिखाएँ"

#: ../clients/tui/nmt-route-table.c:187
msgid "Destination"
msgstr "गंतव्य"

#: ../clients/tui/nmt-route-table.c:187
msgid "Prefix"
msgstr "उपसर्ग"

#: ../clients/tui/nmt-route-table.c:196
msgid "Next Hop"
msgstr "अगला हॉप"

#: ../clients/tui/nmt-route-table.c:204
msgid "Metric"
msgstr "मेट्रिक"

#: ../clients/tui/nmt-route-table.c:224
msgid "No custom routes are defined."
msgstr "कोई पसंदीदा रूट परिभाषित नहीं है."

#: ../clients/tui/nmt-slave-list.c:134
msgid "Select the type of slave connection you wish to add."
msgstr "स्लेव कनेक्शन के प्रकार चुनें जिसे आप जोड़ना चाहते हैं."

#: ../clients/tui/nmt-widget-list.c:139
msgid "Add..."
msgstr "जोड़ें..."

#: ../clients/tui/nmt-widget-list.c:202
msgid "Remove"
msgstr "हटाएँ"

#: ../clients/tui/nmtui-connect.c:55
msgid ""
"openconnect will be run to authenticate.\n"
"It will return to nmtui when completed."
msgstr ""

#: ../clients/tui/nmtui-connect.c:69
#, fuzzy, c-format
msgid "Error: openconnect failed: %s"
msgstr "त्रुटि: कनेक्शन विलोपन विफल: %s"

#: ../clients/tui/nmtui-connect.c:76
#, fuzzy, c-format
msgid "openconnect failed with status %d"
msgstr "%d स्थिति के साथ संपादक विफल"

#: ../clients/tui/nmtui-connect.c:80
#, fuzzy, c-format
msgid "openconnect failed with signal %d"
msgstr "%d संकेत के साथ संपादक विफल"

#: ../clients/tui/nmtui-connect.c:183
#, fuzzy, c-format
msgid "Activation failed: %s"
msgstr "सक्रियकरण विफल"

#: ../clients/tui/nmtui-connect.c:254
msgid "Connecting..."
msgstr "जुड़ रहा है..."

#: ../clients/tui/nmtui-connect.c:292 ../clients/tui/nmtui-connect.c:329
#, c-format
msgid "Could not activate connection: %s"
msgstr "कनेक्शन सक्रिय नहीं कर सका: %s"

#: ../clients/tui/nmtui-connect.c:391 ../clients/tui/nmtui-connect.c:440
msgid "Activate"
msgstr "सक्रिय करें"

#: ../clients/tui/nmtui-connect.c:393
msgid "Deactivate"
msgstr "निष्क्रिय करें"

#: ../clients/tui/nmtui-connect.c:445 ../clients/tui/nmtui-edit.c:118
#: ../clients/tui/nmtui.c:128
msgid "Quit"
msgstr "बाहर"

#: ../clients/tui/nmtui-connect.c:445 ../clients/tui/nmtui-edit.c:118
msgid "Back"
msgstr ""

#: ../clients/tui/nmtui-connect.c:468
#, c-format
msgid "No such connection '%s'"
msgstr "कोई ऐसा कनेक्शन नहीं '%s'"

#: ../clients/tui/nmtui-connect.c:470
msgid "Connection is already active"
msgstr "कनेक्शन पहले से सक्रिय है"

#: ../clients/tui/nmtui-edit.c:228
msgid "Create"
msgstr "बनाएँ"

#: ../clients/tui/nmtui-edit.c:370
msgid "Select the type of connection you wish to create."
msgstr "कनेक्शन के प्रकार चुनें जिसे आप करना चाहते हैं."

#: ../clients/tui/nmtui-edit.c:378
msgid ""
"If you are creating a VPN, and the VPN connection you wish to create does "
"not appear in the list, you may not have the correct VPN plugin installed."
msgstr ""
"यदि VPN कनेक्शन के प्रकार आप बनाना चाहते हैं सूची में प्रकट नहीं होता है, तो आप सही "
"वीपीएन प्लगइन संस्थापित नहीं हो सकता है."

#: ../clients/tui/nmtui-edit.c:414 ../clients/tui/nmtui-edit.c:430
msgid "New Connection"
msgstr "नया कनेक्शन"

#: ../clients/tui/nmtui-edit.c:469
#, c-format
msgid "Unable to delete connection: %s"
msgstr "कनेक्शन मिटाने में असमर्थ: %s"

#: ../clients/tui/nmtui-edit.c:508
#, fuzzy, c-format
msgid "Could not delete connection '%s': %s"
msgstr "टीएलएस कनेक्शन मिटा नहीं सका: %s"

#: ../clients/tui/nmtui-edit.c:530
#, c-format
msgid "Are you sure you want to delete the connection '%s'?"
msgstr "क्या आप निश्चित हैं कि आप इस कनेक्शन '%s को मिटाना चाहते हैं?"

#: ../clients/tui/nmtui-hostname.c:45
msgid "Set Hostname"
msgstr "मेजबाननाम सेट करें"

#: ../clients/tui/nmtui-hostname.c:53
msgid "Hostname"
msgstr "मेजबाननाम"

#. TRANSLATORS: this indicates the result. ie, "I have set the hostname to ..."
#: ../clients/tui/nmtui-hostname.c:116
#, c-format
msgid "Set hostname to '%s'"
msgstr "'%s' पर मेजबाननाम सेट करें"

#: ../clients/tui/nmtui-hostname.c:118
#, c-format
msgid "Unable to set hostname: %s"
msgstr "मेजबाननाम सेट नहीं कर सका: %s"

#: ../clients/tui/nmtui.c:51 ../clients/tui/nmtui.c:54
msgid "connection"
msgstr "कनेक्शन"

#: ../clients/tui/nmtui.c:52
msgid "Edit a connection"
msgstr "कनेक्शन संपादित करें"

#: ../clients/tui/nmtui.c:55
msgid "Activate a connection"
msgstr "कनेक्शन सक्रिय करें"

#: ../clients/tui/nmtui.c:57
msgid "new hostname"
msgstr "नया मेजबाननाम"

#: ../clients/tui/nmtui.c:58
msgid "Set system hostname"
msgstr "तंत्र मेजबाननाम सेट करें"

#: ../clients/tui/nmtui.c:102
msgid "NetworkManager TUI"
msgstr "NetworkManager TUI"

#: ../clients/tui/nmtui.c:110
msgid "Please select an option"
msgstr "कृपया कोई विकल्प चुनें"

#: ../clients/tui/nmtui.c:158
msgid "Usage"
msgstr "प्रयोग"

#: ../clients/tui/nmtui.c:239
msgid "Could not parse arguments"
msgstr "तर्क पदव्याख्या नहीं कर सकता"

#: ../clients/tui/nmtui.c:249
#, c-format
msgid "Could not contact NetworkManager: %s.\n"
msgstr "नेटवर्कमैनेजर से संपर्क नहीं कर सका: %s\n"

#: ../clients/tui/nmtui.c:254
msgid "NetworkManager is not running."
msgstr "नेटवर्कप्रबंधक कार्यशील नहीं है."

#: ../libnm-core/nm-crypto.c:213
#, fuzzy, c-format
msgid "PEM key file had no start tag"
msgstr "PEM कुंजी फाइल के पास कोई अंत टैग '%s' नहीं है."

#: ../libnm-core/nm-crypto.c:221
#, c-format
msgid "PEM key file had no end tag '%s'."
msgstr "PEM कुंजी फाइल के पास कोई अंत टैग '%s' नहीं है."

#: ../libnm-core/nm-crypto.c:248
#, c-format
msgid "Malformed PEM file: Proc-Type was not first tag."
msgstr "विरूपित PEM फाइल: Proc-Type पहला टैग नहीं था."

#: ../libnm-core/nm-crypto.c:256
#, c-format
msgid "Malformed PEM file: unknown Proc-Type tag '%s'."
msgstr "विरूपित PEM फाइल: अज्ञात Proc-Type टैग '%s'."

#: ../libnm-core/nm-crypto.c:268
#, c-format
msgid "Malformed PEM file: DEK-Info was not the second tag."
msgstr "विरूपित PEM फाइल: DEK-Info दूसरा टैग नहीं था."

#: ../libnm-core/nm-crypto.c:279
#, c-format
msgid "Malformed PEM file: no IV found in DEK-Info tag."
msgstr "विरूपित PEM फाइल: कोई IV DEK-Info टैग में नहीं मिला."

#: ../libnm-core/nm-crypto.c:287
#, c-format
msgid "Malformed PEM file: invalid format of IV in DEK-Info tag."
msgstr "विरूपित PEM फाइल: IV का अवैध प्रारूप DEK-Info टैग में."

#: ../libnm-core/nm-crypto.c:298
#, c-format
msgid "Malformed PEM file: unknown private key cipher '%s'."
msgstr "विरूपित PEM फाइल: अज्ञात निजी कुंजी साइफर '%s'."

#: ../libnm-core/nm-crypto.c:319
#, c-format
msgid "Could not decode private key."
msgstr "निजी कुंजी को विगोपित नहीं कर सका."

#: ../libnm-core/nm-crypto.c:360
msgid "Failed to find expected PKCS#8 start tag."
msgstr "अपेक्षित PKCS#8 आरंभ टैग को खोजने में असफल."

#: ../libnm-core/nm-crypto.c:368
#, c-format
msgid "Failed to find expected PKCS#8 end tag '%s'."
msgstr "अपेक्षित PKCS#8 अंत टैग '%s' को खोजने में असफल."

#: ../libnm-core/nm-crypto.c:380
msgid "Failed to decode PKCS#8 private key."
msgstr "PKCS#8 निजी कुंजी व्याख्या करने में असफल रहा."

#: ../libnm-core/nm-crypto.c:439
#, c-format
msgid "IV must be an even number of bytes in length."
msgstr "IV की लंबाई में बाइट संख्या सम संख्या होनी चाहिए."

#: ../libnm-core/nm-crypto.c:455
#, c-format
msgid "IV contains non-hexadecimal digits."
msgstr "IV गैर हेक्साडेसीमेल अंक समाहित करता है."

#: ../libnm-core/nm-crypto.c:531
#, fuzzy, c-format
msgid "IV must contain at least 8 characters"
msgstr "IV गैर हेक्साडेसीमेल अंक समाहित करता है."

#: ../libnm-core/nm-crypto.c:579
#, c-format
msgid "Unable to determine private key type."
msgstr "निजी कुंजी प्रकार निर्धारित करने में असमर्थ."

#: ../libnm-core/nm-crypto.c:591
#, c-format
msgid "Password provided, but key was not encrypted."
msgstr ""

#: ../libnm-core/nm-crypto.c:652
#, c-format
msgid "PEM certificate had no start tag '%s'."
msgstr "PEM प्रमाणपत्र के पास कोई प्रारंभ टैग '%s' नहीं है."

#: ../libnm-core/nm-crypto.c:661
#, c-format
msgid "PEM certificate had no end tag '%s'."
msgstr "PEM प्रमाणपत्र के पास कोई अंत टैग '%s' नहीं है."

#: ../libnm-core/nm-crypto.c:673
#, c-format
msgid "Failed to decode certificate."
msgstr "प्रमाणपत्र विगोपित करने में विफल."

#: ../libnm-core/nm-crypto.c:702 ../libnm-core/nm-crypto.c:755
#, fuzzy, c-format
msgid "Certificate file is empty"
msgstr "गुण रिक्त है"

#: ../libnm-core/nm-crypto.c:735
#, fuzzy, c-format
msgid "Failed to recognize certificate"
msgstr "प्रमाणपत्र विगोपित करने में विफल."

#: ../libnm-core/nm-crypto.c:845
#, fuzzy, c-format
msgid "not a valid private key"
msgstr "अवैध निजी कुँजी"

#: ../libnm-core/nm-crypto-gnutls.c:75
msgid "Failed to initialize the crypto engine."
msgstr "क्रिप्टो ईंजन आरंभीकृत करने में विफल."

#: ../libnm-core/nm-crypto-gnutls.c:107 ../libnm-core/nm-crypto-nss.c:129
#, c-format
msgid "Unsupported key cipher for decryption"
msgstr ""

#: ../libnm-core/nm-crypto-gnutls.c:117 ../libnm-core/nm-crypto-nss.c:136
#, fuzzy, c-format
msgid "Invalid IV length (must be at least %u)."
msgstr "अवैध IV लंबाई (जरूर कम से कम %d होना चाहिए)."

#: ../libnm-core/nm-crypto-gnutls.c:134
#, fuzzy, c-format
msgid "Failed to initialize the decryption cipher context: %s (%s)"
msgstr "विगोपन साइफर संदर्भ को आरंभीकृत करने में विफल: %s / %s."

#: ../libnm-core/nm-crypto-gnutls.c:146
#, fuzzy, c-format
msgid "Failed to decrypt the private key: %s (%s)"
msgstr "निजी कुंजी गोपित करने में विफल: %s / %s."

#: ../libnm-core/nm-crypto-gnutls.c:160 ../libnm-core/nm-crypto-nss.c:223
#, c-format
msgid "Failed to decrypt the private key: unexpected padding length."
msgstr "निजी कुंजी गोपित करने में विफल: अप्रत्याशित पैडिंग लंबाई."

#: ../libnm-core/nm-crypto-gnutls.c:171 ../libnm-core/nm-crypto-nss.c:234
#, c-format
msgid "Failed to decrypt the private key."
msgstr "निजी कुंजी गोपित करने में विफल."

#: ../libnm-core/nm-crypto-gnutls.c:205 ../libnm-core/nm-crypto-nss.c:289
#, c-format
msgid "Unsupported key cipher for encryption"
msgstr ""

#: ../libnm-core/nm-crypto-gnutls.c:221
#, fuzzy, c-format
msgid "Failed to initialize the encryption cipher context: %s (%s)"
msgstr "गोपन साइफर संदर्भ को आरंभीकृत करने में विफल: %s / %s."

#: ../libnm-core/nm-crypto-gnutls.c:247
#, fuzzy, c-format
msgid "Failed to encrypt the data: %s (%s)"
msgstr "आँकड़ा गोपित करने में विफल: %s / %s."

#: ../libnm-core/nm-crypto-gnutls.c:272
#, c-format
msgid "Error initializing certificate data: %s"
msgstr "प्रमाणपत्र आँकड़ा आरंभीकृत करने में विफल: %s"

#: ../libnm-core/nm-crypto-gnutls.c:294
#, c-format
msgid "Couldn't decode certificate: %s"
msgstr "प्रमाणपत्र विगोपित नहीं कर सका: %s"

#: ../libnm-core/nm-crypto-gnutls.c:321
#, c-format
msgid "Couldn't initialize PKCS#12 decoder: %s"
msgstr "PKCS#12 विगोपक आरंभीकृत नहीं कर सका: %s"

#: ../libnm-core/nm-crypto-gnutls.c:334
#, c-format
msgid "Couldn't decode PKCS#12 file: %s"
msgstr "PKCS#12 फाइल विगोपित नहीं कर सका: %s"

#: ../libnm-core/nm-crypto-gnutls.c:348
#, c-format
msgid "Couldn't verify PKCS#12 file: %s"
msgstr "PKCS#12 फाइल जाँच नहीं सका: %s"

#: ../libnm-core/nm-crypto-gnutls.c:376
#, c-format
msgid "Couldn't initialize PKCS#8 decoder: %s"
msgstr "PKCS#8 विगोपक आरंभीकृत नहीं कर सका: %s"

#: ../libnm-core/nm-crypto-gnutls.c:403
#, c-format
msgid "Couldn't decode PKCS#8 file: %s"
msgstr "PKCS#8 फाइल विगोपित नहीं कर सका: %s"

#: ../libnm-core/nm-crypto-nss.c:82
#, c-format
msgid "Failed to initialize the crypto engine: %d."
msgstr "क्रिप्टो ईंजन आरंभीकृत करने में विफल: %d."

#: ../libnm-core/nm-crypto-nss.c:148
#, c-format
msgid "Failed to initialize the decryption cipher slot."
msgstr "विगोपन साइफर स्लॉट को आरंभीकृत करने में विफल."

#: ../libnm-core/nm-crypto-nss.c:158
#, c-format
msgid "Failed to set symmetric key for decryption."
msgstr "गोपन के लिए सममितीय कुंजी सेट करने में विफल."

#: ../libnm-core/nm-crypto-nss.c:168
#, c-format
msgid "Failed to set IV for decryption."
msgstr "IV को गोपन के लिए सेट करने में विफल."

#: ../libnm-core/nm-crypto-nss.c:176
#, c-format
msgid "Failed to initialize the decryption context."
msgstr "गोपन संदर्भ आरंभीकृत करने में विफल."

#: ../libnm-core/nm-crypto-nss.c:192
#, c-format
msgid "Failed to decrypt the private key: %d."
msgstr "निजी कुंजी गोपित करने में विफल: %d."

#: ../libnm-core/nm-crypto-nss.c:200
#, c-format
msgid "Failed to decrypt the private key: decrypted data too large."
msgstr "निजी कुंजी गोपित करने में विफल: विगोपित आँकड़ा काफी बड़ा है."

#: ../libnm-core/nm-crypto-nss.c:211
#, c-format
msgid "Failed to finalize decryption of the private key: %d."
msgstr "निजी कुंजी के विगोपन को अंतिम रूप देने में विफल: %d."

#: ../libnm-core/nm-crypto-nss.c:300
#, c-format
msgid "Failed to initialize the encryption cipher slot."
msgstr "गोपन साइफर स्लाट आरंभीकृत करने में विफल."

#: ../libnm-core/nm-crypto-nss.c:308
#, c-format
msgid "Failed to set symmetric key for encryption."
msgstr "गोपन के लिए सममितीय कुंजी सेट करने में विफल."

#: ../libnm-core/nm-crypto-nss.c:316
#, c-format
msgid "Failed to set IV for encryption."
msgstr "IV को गोपन के लिए सेट करने में विफल."

#: ../libnm-core/nm-crypto-nss.c:324
#, c-format
msgid "Failed to initialize the encryption context."
msgstr "गोपन संदर्भ आरंभीकृत करने में विफल."

#: ../libnm-core/nm-crypto-nss.c:347
#, c-format
msgid "Failed to encrypt: %d."
msgstr "गोपित करने में विफल: %d."

#: ../libnm-core/nm-crypto-nss.c:355
#, c-format
msgid "Unexpected amount of data after encrypting."
msgstr "गोपन के बाद आँकड़ा की अप्रत्याशित मात्रा."

#: ../libnm-core/nm-crypto-nss.c:393
#, c-format
msgid "Couldn't decode certificate: %d"
msgstr "प्रमाणपत्र डिकोड नहीं कर सका: %d"

#: ../libnm-core/nm-crypto-nss.c:439
#, c-format
msgid "Password must be UTF-8"
msgstr ""

#: ../libnm-core/nm-crypto-nss.c:462
#, fuzzy, c-format
msgid "Couldn't initialize slot"
msgstr "PKCS#8 विगोपक आरंभीकृत नहीं कर सका: %s"

#: ../libnm-core/nm-crypto-nss.c:470
#, c-format
msgid "Couldn't initialize PKCS#12 decoder: %d"
msgstr "PKCS#12 डिकोडर को आरंभीकृत नहीं कर सका: %d"

#: ../libnm-core/nm-crypto-nss.c:479
#, c-format
msgid "Couldn't decode PKCS#12 file: %d"
msgstr "PKCS#12 फाइल विगोपित नहीं कर सका: %d"

#: ../libnm-core/nm-crypto-nss.c:488
#, c-format
msgid "Couldn't verify PKCS#12 file: %d"
msgstr "PKCS#12 फाइल जाँच नहीं सका: %d"

#: ../libnm-core/nm-crypto-nss.c:538
msgid "Could not generate random data."
msgstr "क्रमहीन आँकड़ा बना नहीं सका."

#: ../libnm-core/nm-connection.c:322
#, fuzzy
msgid "wrong type; should be a list of strings."
msgstr "विशेषता किस्म को '%s' पर सेट होना चाहिए"

#: ../libnm-core/nm-connection.c:392
#, fuzzy
msgid "unknown setting name"
msgstr "त्रुटि: अज्ञात सेटिंग '%s'\n"

#: ../libnm-core/nm-connection.c:404
#, fuzzy
msgid "duplicate setting name"
msgstr "त्रुटि: अज्ञात सेटिंग '%s'\n"

#: ../libnm-core/nm-connection.c:1415
msgid "setting not found"
msgstr ""

#: ../libnm-core/nm-connection.c:1481 ../libnm-core/nm-connection.c:1506
#: ../libnm-core/nm-connection.c:1531
msgid "setting is required for non-slave connections"
msgstr ""

#: ../libnm-core/nm-connection.c:1494 ../libnm-core/nm-connection.c:1519
#: ../libnm-core/nm-connection.c:1544
#, fuzzy
msgid "setting not allowed in slave connection"
msgstr "त्रुटि: %s' सेटिंग इस कनेक्शन में उपस्थित नहीं है.\n"

#: ../libnm-core/nm-connection.c:1634
msgid "Unexpected failure to verify the connection"
msgstr "कनेक्शन जाँचने के लिए अप्रत्याशित विफलता"

#: ../libnm-core/nm-connection.c:1681
msgid "Unexpected failure to normalize the connection"
msgstr "कनेक्शन सामान्य करने के लिए अप्रत्याशित विफलता"

#: ../libnm-core/nm-connection.c:2375 ../libnm-core/nm-setting-8021x.c:2569
#: ../libnm-core/nm-setting-8021x.c:2586 ../libnm-core/nm-setting-8021x.c:2617
#: ../libnm-core/nm-setting-8021x.c:2634 ../libnm-core/nm-setting-8021x.c:2676
#: ../libnm-core/nm-setting-8021x.c:2688 ../libnm-core/nm-setting-8021x.c:2706
#: ../libnm-core/nm-setting-8021x.c:2718 ../libnm-core/nm-setting-8021x.c:2742
#: ../libnm-core/nm-setting-8021x.c:2824 ../libnm-core/nm-setting-adsl.c:174
#: ../libnm-core/nm-setting-bluetooth.c:125
#: ../libnm-core/nm-setting-bluetooth.c:183
#: ../libnm-core/nm-setting-bluetooth.c:197 ../libnm-core/nm-setting-cdma.c:144
#: ../libnm-core/nm-setting-connection.c:931
#: ../libnm-core/nm-setting-connection.c:974
#: ../libnm-core/nm-setting-connection.c:1140
#: ../libnm-core/nm-setting-ip-config.c:4816
#: ../libnm-core/nm-setting-ip-tunnel.c:374
#: ../libnm-core/nm-setting-olpc-mesh.c:99
#: ../libnm-core/nm-setting-ovs-patch.c:92 ../libnm-core/nm-setting-pppoe.c:146
#: ../libnm-core/nm-setting-vpn.c:531 ../libnm-core/nm-setting-vxlan.c:339
#: ../libnm-core/nm-setting-wifi-p2p.c:136 ../libnm-core/nm-setting-wimax.c:110
#: ../libnm-core/nm-setting-wireless-security.c:914
#: ../libnm-core/nm-setting-wireless.c:737
msgid "property is missing"
msgstr "गुण अनुपस्थित है"

#: ../libnm-core/nm-connection.c:2521
#, fuzzy
msgid "IP Tunnel"
msgstr "PAN कनेक्शन"

#: ../libnm-core/nm-dbus-utils.c:200
#, c-format
msgid "Method returned type '%s', but expected '%s'"
msgstr ""

#: ../libnm-core/nm-keyfile-utils.c:210
#, c-format
msgid "value is not an integer in range [%lld, %lld]"
msgstr ""

#: ../libnm-core/nm-keyfile.c:211
msgid "ignoring missing number"
msgstr ""

#: ../libnm-core/nm-keyfile.c:219
#, fuzzy, c-format
msgid "ignoring invalid number '%s'"
msgstr "अमान्य मीट्रिक '%s'"

#: ../libnm-core/nm-keyfile.c:240
#, fuzzy, c-format
msgid "ignoring invalid %s address: %s"
msgstr "अमान्य IPv4 पता '%s'"

#: ../libnm-core/nm-keyfile.c:282
#, fuzzy, c-format
msgid "ignoring invalid gateway '%s' for %s route"
msgstr "अवैध गेटवे '%s'"

#: ../libnm-core/nm-keyfile.c:303
#, fuzzy, c-format
msgid "ignoring invalid %s route: %s"
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-keyfile.c:428
#, c-format
msgid "unexpected character '%c' for address %s: '%s' (position %td)"
msgstr ""

#: ../libnm-core/nm-keyfile.c:438
#, c-format
msgid "unexpected character '%c' for %s: '%s' (position %td)"
msgstr ""

#: ../libnm-core/nm-keyfile.c:447
#, c-format
msgid "unexpected character '%c' in prefix length for %s: '%s' (position %td)"
msgstr ""

#: ../libnm-core/nm-keyfile.c:458
#, c-format
msgid "garbage at the end of value %s: '%s'"
msgstr ""

#: ../libnm-core/nm-keyfile.c:464
#, c-format
msgid "deprecated semicolon at the end of value %s: '%s'"
msgstr ""

#: ../libnm-core/nm-keyfile.c:479
#, c-format
msgid "invalid prefix length for %s '%s', defaulting to %d"
msgstr ""

#: ../libnm-core/nm-keyfile.c:486
#, c-format
msgid "missing prefix length for %s '%s', defaulting to %d"
msgstr ""

#: ../libnm-core/nm-keyfile.c:814 ../libnm-core/nm-setting-user.c:374
#, c-format
msgid "invalid value for \"%s\": %s"
msgstr ""

#: ../libnm-core/nm-keyfile.c:852
#, fuzzy, c-format
msgid "ignoring invalid DNS server IPv%c address '%s'"
msgstr "अमान्य IPv4 पता '%s'"

#: ../libnm-core/nm-keyfile.c:948 ../libnm-core/nm-keyfile.c:3075
#, c-format
msgid "ignoring invalid byte element '%d' (not between 0 and 255 inclusive)"
msgstr ""

#: ../libnm-core/nm-keyfile.c:959
#, fuzzy
msgid "ignoring invalid MAC address"
msgstr "एक वैध MAC पता नहीं है"

#: ../libnm-core/nm-keyfile.c:1217
msgid "ignoring invalid SSID"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1233
msgid "ignoring invalid raw password"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1370
#, fuzzy
msgid "invalid key/cert value"
msgstr "अवैध '%s' या इसका मान '%s'"

#: ../libnm-core/nm-keyfile.c:1381
#, fuzzy, c-format
msgid "invalid key/cert value path \"%s\""
msgstr "अवैध '%s' या इसका मान '%s'"

#: ../libnm-core/nm-keyfile.c:1397 ../libnm-core/nm-keyfile.c:1480
#, c-format
msgid "certificate or key file '%s' does not exist"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1406
#, c-format
msgid "invalid PKCS#11 URI \"%s\""
msgstr ""

#: ../libnm-core/nm-keyfile.c:1450
msgid "invalid key/cert value data:;base64, is not base64"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1459
msgid "invalid key/cert value data:;base64,file://"
msgstr ""

#: ../libnm-core/nm-keyfile.c:1492
#, fuzzy
msgid "invalid key/cert value is not a valid blob"
msgstr "मान '%s' एक वैध UUID नहीं है"

#: ../libnm-core/nm-keyfile.c:1594
#, fuzzy, c-format
msgid "invalid parity value '%s'"
msgstr "अवैध '%s' या इसका मान '%s'"

#: ../libnm-core/nm-keyfile.c:1611 ../libnm-core/nm-keyfile.c:3130
#, fuzzy, c-format
msgid "invalid setting: %s"
msgstr "त्रुटि: अवैध सेटिंग नाम; %s\n"

#: ../libnm-core/nm-keyfile.c:1628
#, fuzzy, c-format
msgid "ignoring invalid team configuration: %s"
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-keyfile.c:1706
#, fuzzy, c-format
msgid "invalid qdisc: %s"
msgstr "अमान्य IPv4 पता '%s'"

#: ../libnm-core/nm-keyfile.c:1752
#, fuzzy, c-format
msgid "invalid tfilter: %s"
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-keyfile.c:2974
#, fuzzy, c-format
msgid "error loading setting value: %s"
msgstr "त्रुटि: अवैध सेटिंग नाम; %s\n"

#: ../libnm-core/nm-keyfile.c:3002 ../libnm-core/nm-keyfile.c:3013
#: ../libnm-core/nm-keyfile.c:3031 ../libnm-core/nm-keyfile.c:3042
#: ../libnm-core/nm-keyfile.c:3053 ../libnm-core/nm-keyfile.c:3105
#: ../libnm-core/nm-keyfile.c:3116
msgid "value cannot be interpreted as integer"
msgstr ""

#: ../libnm-core/nm-keyfile.c:3151
#, fuzzy, c-format
msgid "invalid setting name '%s'"
msgstr "त्रुटि: अवैध सेटिंग नाम; %s\n"

#: ../libnm-core/nm-keyfile.c:3196
#, fuzzy, c-format
msgid "invalid key '%s.%s'"
msgstr "अवैध विकल्प '%s'"

#: ../libnm-core/nm-keyfile.c:3211
#, fuzzy, c-format
msgid "key '%s.%s' is not boolean"
msgstr "'%s' संख्या नहीं है"

#: ../libnm-core/nm-keyfile.c:3268
#, fuzzy, c-format
msgid "invalid peer public key in section '%s'"
msgstr "अवैध विकल्प '%s'"

#: ../libnm-core/nm-keyfile.c:3280
#, c-format
msgid "key '%s.%s' is not a valid 256 bit key in base64 encoding"
msgstr ""

#: ../libnm-core/nm-keyfile.c:3293
#, fuzzy, c-format
msgid "key '%s.%s' is not a valid secret flag"
msgstr "'%s' वैध DCB फ्लैग नहीं है"

#: ../libnm-core/nm-keyfile.c:3305
#, fuzzy, c-format
msgid "key '%s.%s' is not a integer in range 0 to 2^32"
msgstr "'%s' संख्या नहीं है"

#: ../libnm-core/nm-keyfile.c:3317
#, fuzzy, c-format
msgid "key '%s.%s' is not a valid endpoint"
msgstr "'%s' एक वैध बांड नहीं है"

#: ../libnm-core/nm-keyfile.c:3339
#, c-format
msgid "key '%s.%s' has invalid allowed-ips"
msgstr ""

#: ../libnm-core/nm-keyfile.c:3351
#, fuzzy, c-format
msgid "peer '%s' is invalid: %s"
msgstr "'%s' वैध नहीं है"

#: ../libnm-core/nm-setting-6lowpan.c:93
#, fuzzy, c-format
msgid "property is not specified"
msgstr "गुण निर्दिष्ट नहीं है और न ही '%s:%s'"

#: ../libnm-core/nm-setting-6lowpan.c:115 ../libnm-core/nm-setting-macsec.c:302
#: ../libnm-core/nm-setting-vlan.c:615
#, c-format
msgid "'%s' value doesn't match '%s=%s'"
msgstr "'%s' मान '%s=%s' से मेल नहीं खाता है"

#: ../libnm-core/nm-setting-6lowpan.c:126
#: ../libnm-core/nm-setting-ip-tunnel.c:352
#: ../libnm-core/nm-setting-macsec.c:313 ../libnm-core/nm-setting-macvlan.c:143
#: ../libnm-core/nm-setting-vlan.c:626 ../libnm-core/nm-setting-vxlan.c:382
#, c-format
msgid "'%s' is neither an UUID nor an interface name"
msgstr "'%s' न ही UUID है न हीं एक अंतरफलक नाम"

#: ../libnm-core/nm-setting-8021x.c:227
msgid "binary data missing"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:255
msgid "URI not NUL terminated"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:264
#, fuzzy
msgid "URI is empty"
msgstr "गुण रिक्त है"

#: ../libnm-core/nm-setting-8021x.c:272
#, fuzzy
msgid "URI is not valid UTF-8"
msgstr "सूची '%s' वैध नहीं है"

#: ../libnm-core/nm-setting-8021x.c:290
#, fuzzy
msgid "data missing"
msgstr "गुण अनुपस्थित है"

#: ../libnm-core/nm-setting-8021x.c:313 ../libnm-core/nm-setting-8021x.c:680
#, fuzzy, c-format
msgid "certificate is invalid: %s"
msgstr "गुण अवैध है"

#: ../libnm-core/nm-setting-8021x.c:321
#, fuzzy, c-format
msgid "certificate detected as invalid scheme"
msgstr "गुण अवैध है"

#: ../libnm-core/nm-setting-8021x.c:535
msgid "CA certificate must be in X.509 format"
msgstr "CA प्रमाणपत्र को जरूर X.509 प्रारूप में होना चाहिए"

#: ../libnm-core/nm-setting-8021x.c:551
msgid "invalid certificate format"
msgstr "अवैध प्रमाणपत्र आँकड़ा प्रारूप"

#: ../libnm-core/nm-setting-8021x.c:690
#, c-format
msgid "password is not supported when certificate is not on a PKCS#11 token"
msgstr ""

#: ../libnm-core/nm-setting-8021x.c:2576 ../libnm-core/nm-setting-8021x.c:2593
#: ../libnm-core/nm-setting-8021x.c:2624 ../libnm-core/nm-setting-8021x.c:2641
#: ../libnm-core/nm-setting-8021x.c:2682 ../libnm-core/nm-setting-8021x.c:2694
#: ../libnm-core/nm-setting-8021x.c:2712 ../libnm-core/nm-setting-8021x.c:2724
#: ../libnm-core/nm-setting-8021x.c:2749 ../libnm-core/nm-setting-adsl.c:181
#: ../libnm-core/nm-setting-cdma.c:151 ../libnm-core/nm-setting-cdma.c:160
#: ../libnm-core/nm-setting-connection.c:938
#: ../libnm-core/nm-setting-connection.c:986 ../libnm-core/nm-setting-gsm.c:286
#: ../libnm-core/nm-setting-gsm.c:343 ../libnm-core/nm-setting-gsm.c:380
#: ../libnm-core/nm-setting-gsm.c:389 ../libnm-core/nm-setting-ip-config.c:4823
#: ../libnm-core/nm-setting-ip4-config.c:183
#: ../libnm-core/nm-setting-ip4-config.c:190
#: ../libnm-core/nm-setting-pppoe.c:153 ../libnm-core/nm-setting-pppoe.c:162
#: ../libnm-core/nm-setting-vpn.c:540 ../libnm-core/nm-setting-vpn.c:550
#: ../libnm-core/nm-setting-wimax.c:119
#: ../libnm-core/nm-setting-wireless-security.c:944
#: ../libnm-core/nm-setting-wireless-security.c:968
#: ../libnm-core/nm-setting.c:1342
msgid "property is empty"
msgstr "गुण रिक्त है"

#: ../libnm-core/nm-setting-8021x.c:2606 ../libnm-core/nm-setting-8021x.c:2654
#, c-format
msgid "has to match '%s' property for PKCS#12"
msgstr "'%s' गुण को PKCS#12 के लिए मिलान करना है"

#: ../libnm-core/nm-setting-8021x.c:2833
#: ../libnm-core/nm-setting-bluetooth.c:110
#: ../libnm-core/nm-setting-infiniband.c:178
#: ../libnm-core/nm-setting-infiniband.c:188
#: ../libnm-core/nm-setting-ip4-config.c:174
#: ../libnm-core/nm-setting-ip6-config.c:222
#: ../libnm-core/nm-setting-ip6-config.c:233
#: ../libnm-core/nm-setting-olpc-mesh.c:128
#: ../libnm-core/nm-setting-wifi-p2p.c:145 ../libnm-core/nm-setting-wimax.c:128
#: ../libnm-core/nm-setting-wired.c:800 ../libnm-core/nm-setting-wired.c:810
#: ../libnm-core/nm-setting-wireless-security.c:987
#: ../libnm-core/nm-setting-wireless-security.c:996
#: ../libnm-core/nm-setting-wireless-security.c:1005
#: ../libnm-core/nm-setting-wireless-security.c:1041
#: ../libnm-core/nm-setting-wireless-security.c:1051
#: ../libnm-core/nm-setting-wireless-security.c:1074
#: ../libnm-core/nm-setting-wireless-security.c:1112
#: ../libnm-core/nm-setting-wireless-security.c:1153
#: ../libnm-core/nm-setting-wireless.c:798
#: ../libnm-core/nm-setting-wireless.c:807
#: ../libnm-core/nm-setting-wireless.c:818 ../libnm-core/nm-setting-wpan.c:176
#: ../libnm-core/nm-utils.c:4511
msgid "property is invalid"
msgstr "गुण अवैध है"

#: ../libnm-core/nm-setting-8021x.c:2860 ../libnm-core/nm-setting-8021x.c:2872
#: ../libnm-core/nm-setting-8021x.c:2886 ../libnm-core/nm-setting-8021x.c:2913
#: ../libnm-core/nm-setting-8021x.c:2928 ../libnm-core/nm-setting-adsl.c:193
#: ../libnm-core/nm-setting-adsl.c:205 ../libnm-core/nm-setting-bluetooth.c:138
#: ../libnm-core/nm-setting-wireless-security.c:923
#, c-format
msgid "'%s' is not a valid value for the property"
msgstr "%s' गुण के लिए वैध मान नहीं है."

#: ../libnm-core/nm-setting-8021x.c:2896
#, fuzzy
msgid "invalid auth flags"
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-setting-bluetooth.c:160
#, fuzzy, c-format
msgid "'%s' connection requires '%s' or '%s' setting"
msgstr "'%s' या '%s' सेटिंग की जरूरत है"

#: ../libnm-core/nm-setting-bluetooth.c:206
#, fuzzy, c-format
msgid "'%s' connection requires '%s' setting"
msgstr "'%s' या '%s' सेटिंग की जरूरत है"

#: ../libnm-core/nm-setting-bond.c:556
#, c-format
msgid "invalid option '%s' or its value '%s'"
msgstr "'%s' अवैध विकल्प या इसका मान '%s'"

#: ../libnm-core/nm-setting-bond.c:581
#, c-format
msgid "only one of '%s' and '%s' can be set"
msgstr "'%s' और '%s' में से केवल सेट किया जा सकता है"

#: ../libnm-core/nm-setting-bond.c:594
#, c-format
msgid "mandatory option '%s' is missing"
msgstr "अनिवार्य विकल्प '%s' अनुपस्थित है"

#: ../libnm-core/nm-setting-bond.c:604
#, c-format
msgid "'%s' is not a valid value for '%s'"
msgstr "'%s' '%s' के लिए वैध मान नहीं है"

#: ../libnm-core/nm-setting-bond.c:618
#, c-format
msgid "'%s=%s' is incompatible with '%s > 0'"
msgstr "'%s=%s' '%s > 0' के साथ असंगत है"

#: ../libnm-core/nm-setting-bond.c:633
#, fuzzy, c-format
msgid "'%s' is not valid for the '%s' option: %s"
msgstr "'%s'एक वैध IPv4 पता '%s' विकल्प के लिए नहीं है"

#: ../libnm-core/nm-setting-bond.c:644
#, c-format
msgid "'%s' option is only valid for '%s=%s'"
msgstr "'%s' विकल्प '%s=%s' के लिए केवल वैध है"

#: ../libnm-core/nm-setting-bond.c:657
#, c-format
msgid "'%s=%s' is not a valid configuration for '%s'"
msgstr "'%s=%s' '%s' के लिए वैध विन्यास है"

#: ../libnm-core/nm-setting-bond.c:670 ../libnm-core/nm-setting-bond.c:679
#: ../libnm-core/nm-setting-bond.c:699 ../libnm-core/nm-setting-bond.c:735
#, c-format
msgid "'%s' option requires '%s' option to be set"
msgstr "'%s' विकल्प '%s' विकल्प के लिए सेट है"

#: ../libnm-core/nm-setting-bond.c:710
#, c-format
msgid "'%s' option is empty"
msgstr "'%s' खाली है"

#: ../libnm-core/nm-setting-bond.c:722
#, c-format
msgid "'%s' is not a valid IPv4 address for '%s' option"
msgstr "'%s'एक वैध IPv4 पता '%s' विकल्प के लिए नहीं है"

#: ../libnm-core/nm-setting-bond.c:750
#, fuzzy, c-format
msgid "'%s' option is only valid with mode '%s'"
msgstr "'%s' विकल्प '%s=%s' के लिए केवल वैध है"

#: ../libnm-core/nm-setting-bond.c:761
#, c-format
msgid "'%s' and '%s' cannot have different values"
msgstr ""

#: ../libnm-core/nm-setting-bond.c:777
#, fuzzy, c-format
msgid "'%s' option should be string"
msgstr "'%s' खाली है"

#: ../libnm-core/nm-setting-bond.c:793
#, fuzzy, c-format
msgid "'%s' option is not valid with mode '%s'"
msgstr "'%s' विकल्प '%s=%s' के लिए केवल वैध है"

#: ../libnm-core/nm-setting-bridge-port.c:317
#: ../libnm-core/nm-setting-ovs-bridge.c:150
#: ../libnm-core/nm-setting-ovs-interface.c:259
#: ../libnm-core/nm-setting-ovs-port.c:187
#: ../libnm-core/nm-setting-team-port.c:319
#, fuzzy, c-format
msgid "missing setting"
msgstr "%s' सेटिंग अनुपस्थित"

#: ../libnm-core/nm-setting-bridge-port.c:328
#: ../libnm-core/nm-setting-ovs-interface.c:280
#: ../libnm-core/nm-setting-ovs-port.c:208
#: ../libnm-core/nm-setting-team-port.c:330
#, c-format
msgid ""
"A connection with a '%s' setting must have the slave-type set to '%s'. "
"Instead it is '%s'"
msgstr "'%s' सेटिंग के साथ कनेक्शन में '%s' में स्लेव किस्म सेट होना चाहिए . इसके बदले '%s' में"

#: ../libnm-core/nm-setting-bridge.c:912
#, c-format
msgid "value '%d' is out of range <%d-%d>"
msgstr "मान '%d' परिसर के बाहर है <%d-%d>"

#: ../libnm-core/nm-setting-bridge.c:929 ../libnm-core/nm-setting-wired.c:774
#: ../libnm-core/nm-setting-wired.c:839 ../libnm-core/nm-setting-wired.c:881
msgid "is not a valid MAC address"
msgstr "एक वैध MAC पता नहीं है"

#: ../libnm-core/nm-setting-bridge.c:970
msgid "the mask can't contain bits 0 (STP), 1 (MAC) or 2 (LACP)"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:908
#, fuzzy, c-format
msgid "setting required for connection of type '%s'"
msgstr "'%s' प्रकार के '%s' कनेक्शन के लिए संपादक नहीं बना सका."

#: ../libnm-core/nm-setting-connection.c:947
#, c-format
msgid "'%s' is not a valid UUID"
msgstr "'%s' वैध UUID नहीं है"

#: ../libnm-core/nm-setting-connection.c:997
#, c-format
msgid "connection type '%s' is not valid"
msgstr "कनेक्शन किस्म '%s' वैध नहीं है"

#: ../libnm-core/nm-setting-connection.c:1033
#, c-format
msgid "Unknown slave type '%s'"
msgstr "अज्ञात स्लेव किस्म '%s'"

#: ../libnm-core/nm-setting-connection.c:1044
#, fuzzy, c-format
msgid "Slave connections need a valid '%s' property"
msgstr "स्लेव कनेक्शन के लिए वैध '"

#: ../libnm-core/nm-setting-connection.c:1065
#, fuzzy, c-format
msgid "Cannot set '%s' without '%s'"
msgstr "सेट नहीं कर सकता '"

#: ../libnm-core/nm-setting-connection.c:1079
#, fuzzy, c-format
msgid "'%s' connections must be enslaved to '%s', not '%s'"
msgstr "'%s' या '%s' सेटिंग की जरूरत है"

#: ../libnm-core/nm-setting-connection.c:1093
#, fuzzy, c-format
msgid "metered value %d is not valid"
msgstr "मान '%s' एक वैध UUID नहीं है"

#: ../libnm-core/nm-setting-connection.c:1104
#: ../libnm-core/nm-setting-connection.c:1115
#: ../libnm-core/nm-setting-connection.c:1128
#, fuzzy, c-format
msgid "value %d is not valid"
msgstr "मान '%s' एक वैध UUID नहीं है"

#: ../libnm-core/nm-setting-connection.c:1149
#, c-format
msgid "property type should be set to '%s'"
msgstr "विशेषता किस्म को '%s' पर सेट होना चाहिए"

#: ../libnm-core/nm-setting-connection.c:1164
#, c-format
msgid "slave-type '%s' requires a '%s' setting in the connection"
msgstr "slave-type '%s' के लिए एक '%s' सेटिंग कनेक्शन में चाहिए"

#: ../libnm-core/nm-setting-connection.c:1174
#, c-format
msgid ""
"Detect a slave connection with '%s' set and a port type '%s'. '%s' should be "
"set to '%s'"
msgstr ""

#: ../libnm-core/nm-setting-connection.c:1191
#, fuzzy, c-format
msgid "A slave connection with '%s' set to '%s' cannot have a '%s' setting"
msgstr "'%s' या '%s' सेटिंग की जरूरत है"

#: ../libnm-core/nm-setting-dcb.c:508
msgid "flags invalid"
msgstr "पताका अवैध है"

#: ../libnm-core/nm-setting-dcb.c:517
msgid "flags invalid - disabled"
msgstr "पताका अवैध है - निष्क्रिय"

#: ../libnm-core/nm-setting-dcb.c:543 ../libnm-core/nm-setting-dcb.c:592
msgid "property invalid (not enabled)"
msgstr "विशेषता अवैध (सक्रिय नहीं)"

#: ../libnm-core/nm-setting-dcb.c:552
msgid "element invalid"
msgstr "तत्व अवैध है"

#: ../libnm-core/nm-setting-dcb.c:567
msgid "sum not 100%"
msgstr "योग 100% नहीं"

#: ../libnm-core/nm-setting-dcb.c:601 ../libnm-core/nm-setting-dcb.c:633
msgid "property invalid"
msgstr "गुण अवैध है"

#: ../libnm-core/nm-setting-dcb.c:623
msgid "property missing"
msgstr "गुण अनुपस्थित है"

#: ../libnm-core/nm-setting-ethtool.c:269
msgid "unsupported offload feature"
msgstr ""

#: ../libnm-core/nm-setting-ethtool.c:277
msgid "offload feature has invalid variant type"
msgstr ""

#: ../libnm-core/nm-setting-ethtool.c:300
#, fuzzy, c-format
msgid "unknown ethtool option '%s'"
msgstr "त्रुटि: अज्ञात कनेक्शन: %s\n"

#: ../libnm-core/nm-setting-gsm.c:299
#, c-format
msgid "property value '%s' is empty or too long (>64)"
msgstr "गुण मान '%s' रिक्त है या काफी लंबा है (>64)"

#: ../libnm-core/nm-setting-gsm.c:331
#, c-format
msgid "'%s' contains invalid char(s) (use [A-Za-z._-])"
msgstr "'%s' में अवैध वर्ण हैं (उपयोग करें [A-Za-z._-])"

#: ../libnm-core/nm-setting-gsm.c:357
#, c-format
msgid "'%s' length is invalid (should be 5 or 6 digits)"
msgstr "'%s' लंबाई अवैध है (5 या 6 अंकों का होना चाहिए)"

#: ../libnm-core/nm-setting-gsm.c:368
#, c-format
msgid "'%s' is not a number"
msgstr "'%s' संख्या नहीं है"

#: ../libnm-core/nm-setting-gsm.c:402
#, fuzzy
msgid "property is empty or wrong size"
msgstr "गुण रिक्त है"

#: ../libnm-core/nm-setting-gsm.c:412
#, fuzzy
msgid "property must contain only digits"
msgstr "विशेषता में प्रोटोकॉल '%s' नहीं है"

#: ../libnm-core/nm-setting-infiniband.c:209
msgid "Must specify a P_Key if specifying parent"
msgstr "एक P_Key जरूर निर्दिष्ट करें यदि जनक को निर्दिष्ट कर रहा है"

#: ../libnm-core/nm-setting-infiniband.c:219
msgid "InfiniBand P_Key connection did not specify parent interface name"
msgstr "InfiniBand P_Key कनेक्शन जनक अंतरफलक नाम निर्दिष्ट नहीं कर रहा है"

#: ../libnm-core/nm-setting-infiniband.c:257
#, c-format
msgid ""
"interface name of software infiniband device must be '%s' or unset (instead "
"it is '%s')"
msgstr ""
"सॉफ़्टवेयर infiniband युक्ति का अंतरफलक नाम '%s' होना चाहिए या इसे अनसेट करें (इसके बदले "
"यह '%s' है)"

#: ../libnm-core/nm-setting-infiniband.c:281
#, fuzzy, c-format
msgid "mtu can be at most %u but it is %u"
msgstr "'%s' परिवहन अवस्था के लिए mtu अधिकतम %d हो सकता है लेकिन यह %d है"

#: ../libnm-core/nm-setting-ip-config.c:136
#, fuzzy, c-format
msgid "Missing IPv4 address"
msgstr "अमान्य IPv4 पता '%s'"

#: ../libnm-core/nm-setting-ip-config.c:136
#, fuzzy, c-format
msgid "Missing IPv6 address"
msgstr "अमान्य IPv6 पता '%s'"

#: ../libnm-core/nm-setting-ip-config.c:141
#, fuzzy, c-format
msgid "Invalid IPv4 address '%s'"
msgstr "अमान्य IPv4 पता '%s'"

#: ../libnm-core/nm-setting-ip-config.c:141
#, fuzzy, c-format
msgid "Invalid IPv6 address '%s'"
msgstr "अमान्य IPv6 पता '%s'"

#: ../libnm-core/nm-setting-ip-config.c:156
#, fuzzy, c-format
msgid "Invalid IPv4 address prefix '%u'"
msgstr "अमान्य IPv4 पता '%s'"

#: ../libnm-core/nm-setting-ip-config.c:156
#, fuzzy, c-format
msgid "Invalid IPv6 address prefix '%u'"
msgstr "अमान्य IPv6 पता '%s'"

#: ../libnm-core/nm-setting-ip-config.c:171
#, fuzzy, c-format
msgid "Invalid routing metric '%s'"
msgstr "अमान्य मीट्रिक '%s'"

#: ../libnm-core/nm-setting-ip-config.c:1289
#: ../libnm-core/nm-setting-sriov.c:418
#, fuzzy
msgid "unknown attribute"
msgstr "त्रुटि: अज्ञात सेटिंग '%s'\n"

#: ../libnm-core/nm-setting-ip-config.c:1299
#: ../libnm-core/nm-setting-sriov.c:428
#, fuzzy, c-format
msgid "invalid attribute type '%s'"
msgstr "अवैध '%s' या इसका मान '%s'"

#: ../libnm-core/nm-setting-ip-config.c:1310
#, c-format
msgid "attribute is not valid for a IPv4 route"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:1311
#, c-format
msgid "attribute is not valid for a IPv6 route"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:1327
#: ../libnm-core/nm-setting-ip-config.c:1351
#, fuzzy, c-format
msgid "'%s' is not a valid IPv4 address"
msgstr "'%s' एक वैध MAC पता नहीं है"

#: ../libnm-core/nm-setting-ip-config.c:1328
#: ../libnm-core/nm-setting-ip-config.c:1352
#, fuzzy, c-format
msgid "'%s' is not a valid IPv6 address"
msgstr "'%s' एक वैध MAC पता नहीं है"

#: ../libnm-core/nm-setting-ip-config.c:1342
#, fuzzy, c-format
msgid "invalid prefix %s"
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2479
#, fuzzy
msgid "invalid priority"
msgstr "अवैध प्राथमिकता नक्शा '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2490
#, fuzzy
msgid "missing table"
msgstr "%s' सेटिंग अनुपस्थित"

#: ../libnm-core/nm-setting-ip-config.c:2496
#, fuzzy
msgid "invalid action"
msgstr "अवैध विकल्प '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2503
msgid "has from/src but the prefix-length is zero"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2510
msgid "missing from/src for a non zero prefix-length"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2515
#, fuzzy
msgid "invalid from/src"
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2520
#, fuzzy
msgid "invalid prefix length for from/src"
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2527
msgid "has to/dst but the prefix-length is zero"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2534
msgid "missing to/dst for a non zero prefix-length"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2539
#, fuzzy
msgid "invalid to/dst"
msgstr "अवैध विकल्प '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2544
#, fuzzy
msgid "invalid prefix length for to/dst"
msgstr "अवैध प्राथमिकता नक्शा '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2552
#, fuzzy
msgid "invalid iifname"
msgstr "अवैध '%s' या इसका मान '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2560
#, fuzzy
msgid "invalid oifname"
msgstr "अवैध '%s' या इसका मान '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2566
#, fuzzy
msgid "invalid source port range"
msgstr "अवैध '%s' या इसका मान '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2572
#, fuzzy
msgid "invalid destination port range"
msgstr "अवैध विकल्प '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2676
#, fuzzy, c-format
msgid "duplicate key %s"
msgstr "त्रुटि: अज्ञात सेटिंग '%s'\n"

#: ../libnm-core/nm-setting-ip-config.c:2690
#, fuzzy, c-format
msgid "invalid key \"%s\""
msgstr "अवैध विकल्प '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2703
#, fuzzy, c-format
msgid "invalid variant type '%s' for \"%s\""
msgstr "अवैध '%s' या इसका मान '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2712
#, fuzzy
msgid "missing \""
msgstr "%s' सेटिंग अनुपस्थित"

#: ../libnm-core/nm-setting-ip-config.c:2718
#, fuzzy
msgid "invalid \""
msgstr "अवैध '%s' या इसका मान '%s'"

#: ../libnm-core/nm-setting-ip-config.c:2909
msgid "Unsupported to-string-flags argument"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:2916
msgid "Unsupported extra-argument"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:3161
#, c-format
msgid "unsupported key \"%s\""
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:3166
#, fuzzy, c-format
msgid "duplicate key \"%s\""
msgstr "त्रुटि: अज्ञात सेटिंग '%s'\n"

#: ../libnm-core/nm-setting-ip-config.c:3171
#, fuzzy, c-format
msgid "invalid value for \"%s\""
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-setting-ip-config.c:3181
msgid "empty text does not describe a rule"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:3187
#, fuzzy, c-format
msgid "missing argument for \"%s\""
msgstr "%s' सेटिंग अनुपस्थित"

#: ../libnm-core/nm-setting-ip-config.c:3199
#, fuzzy
msgid "invalid \"from\" part"
msgstr "अवैध प्राथमिकता नक्शा '%s'"

#: ../libnm-core/nm-setting-ip-config.c:3213
#, fuzzy
msgid "invalid \"to\" part"
msgstr "अवैध विकल्प '%s'"

#: ../libnm-core/nm-setting-ip-config.c:3222
#, c-format
msgid "cannot detect address family for rule"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:3279
#: ../libnm-core/nm-setting-ip-config.c:3373
#, fuzzy, c-format
msgid "rule is invalid: %s"
msgstr "गुण अवैध है"

#: ../libnm-core/nm-setting-ip-config.c:3356
#, fuzzy
msgid "invalid address family"
msgstr "अमान्य IPv4 पता '%s'"

#: ../libnm-core/nm-setting-ip-config.c:4618
#, fuzzy, c-format
msgid "rule #%u is invalid: %s"
msgstr "गुण अवैध है"

#: ../libnm-core/nm-setting-ip-config.c:4836
#, c-format
msgid "%d. DNS server address is invalid"
msgstr "%d. डीएनएस सर्वर पता अवैध है"

#: ../libnm-core/nm-setting-ip-config.c:4852
#, fuzzy, c-format
msgid "%d. IP address is invalid"
msgstr "%d. IPv4 पता अवैध है"

#: ../libnm-core/nm-setting-ip-config.c:4864
#, fuzzy, c-format
msgid "%d. IP address has 'label' property with invalid type"
msgstr "%d. IPv4 पता में अवैध उपसर्ग है"

#: ../libnm-core/nm-setting-ip-config.c:4873
#, fuzzy, c-format
msgid "%d. IP address has invalid label '%s'"
msgstr "%d. IPv4 पता में अवैध लेबल '%s' है"

#: ../libnm-core/nm-setting-ip-config.c:4887
msgid "gateway cannot be set if there are no addresses configured"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:4896
#, fuzzy
msgid "gateway is invalid"
msgstr "गुण अवैध है"

#: ../libnm-core/nm-setting-ip-config.c:4910
#, c-format
msgid "%d. route is invalid"
msgstr "%d. रूट अवैध है"

#: ../libnm-core/nm-setting-ip-config.c:4919
#, c-format
msgid "%d. route cannot be a default route"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:4935
#, c-format
msgid "%u. rule has wrong address-family"
msgstr ""

#: ../libnm-core/nm-setting-ip-config.c:4944
#, fuzzy, c-format
msgid "%u. rule is invalid: %s"
msgstr "%d. रूट अवैध है"

#: ../libnm-core/nm-setting-ip-config.c:4957
#, fuzzy, c-format
msgid "a gateway is incompatible with '%s'"
msgstr "'%s=%s' '%s > 0' के साथ असंगत है"

#: ../libnm-core/nm-setting-ip-tunnel.c:340
#, fuzzy, c-format
msgid "'%d' is not a valid tunnel mode"
msgstr "'%d' वैध चैनल नहीं है"

#: ../libnm-core/nm-setting-ip-tunnel.c:363
#: ../libnm-core/nm-setting-ip-tunnel.c:383
#, fuzzy, c-format
msgid "'%s' is not a valid IPv%c address"
msgstr "'%s' एक वैध MAC पता नहीं है"

#: ../libnm-core/nm-setting-ip-tunnel.c:400
msgid "tunnel keys can only be specified for GRE tunnels"
msgstr ""

#: ../libnm-core/nm-setting-ip-tunnel.c:413
#: ../libnm-core/nm-setting-ip-tunnel.c:429
#, fuzzy, c-format
msgid "'%s' is not a valid tunnel key"
msgstr "'%s' वैध चैनल नहीं है"

#: ../libnm-core/nm-setting-ip-tunnel.c:441
msgid "a fixed TTL is allowed only when path MTU discovery is enabled"
msgstr ""

#: ../libnm-core/nm-setting-ip-tunnel.c:454
#, c-format
msgid "some flags are invalid for the select mode: %s"
msgstr ""

#: ../libnm-core/nm-setting-ip-tunnel.c:468
#, fuzzy, c-format
msgid "wired setting not allowed for mode %s"
msgstr "यह गुण '%s=%s' के लिए अनुमतिप्राप्त नहीं है"

#: ../libnm-core/nm-setting-ip4-config.c:128
#: ../libnm-core/nm-setting-ip6-config.c:174
#, c-format
msgid "this property cannot be empty for '%s=%s'"
msgstr "यह विशेषता '%s=%s' के लिए रिक्त नहीं हो सकता है"

#: ../libnm-core/nm-setting-ip4-config.c:140
#: ../libnm-core/nm-setting-ip4-config.c:150
#: ../libnm-core/nm-setting-ip4-config.c:162
#: ../libnm-core/nm-setting-ip6-config.c:189
#: ../libnm-core/nm-setting-ip6-config.c:199
#: ../libnm-core/nm-setting-ip6-config.c:209
#, c-format
msgid "this property is not allowed for '%s=%s'"
msgstr "यह गुण '%s=%s' के लिए अनुमतिप्राप्त नहीं है"

#: ../libnm-core/nm-setting-ip4-config.c:199
#, fuzzy, c-format
msgid "'%s' is not a valid FQDN"
msgstr "'%s' वैध UUID नहीं है"

#: ../libnm-core/nm-setting-ip4-config.c:208
msgid "property cannot be set when dhcp-hostname is also set"
msgstr ""

#: ../libnm-core/nm-setting-ip4-config.c:220
#, fuzzy, c-format
msgid "multiple addresses are not allowed for '%s=%s'"
msgstr "यह गुण '%s=%s' के लिए अनुमतिप्राप्त नहीं है"

#: ../libnm-core/nm-setting-ip4-config.c:234
#, fuzzy
msgid "property should be TRUE when method is set to disabled"
msgstr "विशेषता किस्म को '%s' पर सेट होना चाहिए"

#: ../libnm-core/nm-setting-ip6-config.c:248
#, fuzzy
msgid "value is not a valid token"
msgstr "मान '%s' एक वैध UUID नहीं है"

#: ../libnm-core/nm-setting-ip6-config.c:259
msgid "only makes sense with EUI64 address generation mode"
msgstr ""

#: ../libnm-core/nm-setting-ip6-config.c:270
#, fuzzy
msgid "invalid DUID"
msgstr "अवैध '%s' या इसका मान '%s'"

#: ../libnm-core/nm-setting-ip6-config.c:282
msgid "token is not in canonical form"
msgstr ""

#: ../libnm-core/nm-setting-ip6-config.c:294
msgid "property should be TRUE when method is set to ignore"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:246
msgid "the key is empty"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:257
#, c-format
msgid "the key must be %d characters"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:265
#, fuzzy
msgid "the key contains non-hexadecimal characters"
msgstr "IV गैर हेक्साडेसीमेल अंक समाहित करता है."

#: ../libnm-core/nm-setting-macsec.c:327 ../libnm-core/nm-setting-macvlan.c:157
#: ../libnm-core/nm-setting-vlan.c:640
#, c-format
msgid "property is not specified and neither is '%s:%s'"
msgstr "गुण निर्दिष्ट नहीं है और न ही '%s:%s'"

#: ../libnm-core/nm-setting-macsec.c:348
#, c-format
msgid "EAP key management requires '%s' setting presence"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:357
msgid "must be either psk (0) or eap (1)"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:366
#, c-format
msgid "invalid port %d"
msgstr ""

#: ../libnm-core/nm-setting-macsec.c:377
msgid "only valid for psk mode"
msgstr ""

#: ../libnm-core/nm-setting-macvlan.c:168
msgid "non promiscuous operation is allowed only in passthru mode"
msgstr ""

#: ../libnm-core/nm-setting-olpc-mesh.c:109
#: ../libnm-core/nm-setting-wireless.c:747
msgid "SSID length is out of range <1-32> bytes"
msgstr "SSID लंबाई <1-32> बाइट के बाहर है"

#: ../libnm-core/nm-setting-olpc-mesh.c:118
#: ../libnm-core/nm-setting-wireless.c:787
#, c-format
msgid "'%d' is not a valid channel"
msgstr "'%d' वैध चैनल नहीं है"

#: ../libnm-core/nm-setting-ovs-bridge.c:159
#, fuzzy, c-format
msgid "A connection with a '%s' setting must not have a master."
msgstr "'%s' या '%s' सेटिंग की जरूरत है"

#: ../libnm-core/nm-setting-ovs-bridge.c:170
#, fuzzy, c-format
msgid "'%s' is not allowed in fail_mode"
msgstr "'%s' एक वैध Wi-Fi अवस्था नहीं चाहिए"

#: ../libnm-core/nm-setting-ovs-interface.c:111
#, fuzzy, c-format
msgid "'%s' is not a valid interface type"
msgstr "'%s' कोई वैध अंतरफलक नाम नहीं है"

#: ../libnm-core/nm-setting-ovs-interface.c:133
#, fuzzy, c-format
msgid "A connection with a '%s' setting needs connection.type explicitly set"
msgstr "'%s' सेटिंग के साथ कनेक्शन में '%s' में स्लेव किस्म सेट होना चाहिए . इसके बदले '%s' में"

#: ../libnm-core/nm-setting-ovs-interface.c:145
#, c-format
msgid "A connection of type '%s' cannot have ovs-interface.type \"system\""
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:157
#, c-format
msgid "A connection of type '%s' cannot have an ovs-interface.type \"%s\""
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:173
#, fuzzy, c-format
msgid ""
"A connection with '%s' setting must be of connection.type \"ovs-interface\" "
"but is \"%s\""
msgstr "'%s' सेटिंग के साथ कनेक्शन में '%s' में स्लेव किस्म सेट होना चाहिए . इसके बदले '%s' में"

#: ../libnm-core/nm-setting-ovs-interface.c:184
#, fuzzy, c-format
msgid ""
"A connection with '%s' setting needs to be of 'patch' interface type, not "
"'%s'"
msgstr "'%s' सेटिंग के साथ कनेक्शन में '%s' में स्लेव किस्म सेट होना चाहिए . इसके बदले '%s' में"

#: ../libnm-core/nm-setting-ovs-interface.c:199
#, fuzzy, c-format
msgid "A connection with ovs-interface.type '%s' setting a 'ovs-patch' setting"
msgstr "'%s' या '%s' सेटिंग की जरूरत है"

#: ../libnm-core/nm-setting-ovs-interface.c:219
#, fuzzy, c-format
msgid "Missing ovs interface setting"
msgstr "%s' सेटिंग अनुपस्थित"

#: ../libnm-core/nm-setting-ovs-interface.c:225
#, c-format
msgid "Missing ovs interface type"
msgstr ""

#: ../libnm-core/nm-setting-ovs-interface.c:268
#: ../libnm-core/nm-setting-ovs-port.c:196
#, fuzzy, c-format
msgid "A connection with a '%s' setting must have a master."
msgstr "'%s' सेटिंग के साथ कनेक्शन में '%s' में स्लेव किस्म सेट होना चाहिए . इसके बदले '%s' में"

#: ../libnm-core/nm-setting-ovs-patch.c:104
#: ../libnm-core/nm-setting-vxlan.c:354
#, fuzzy, c-format
msgid "'%s' is not a valid IP address"
msgstr "'%s' एक वैध MAC पता नहीं है"

#: ../libnm-core/nm-setting-ovs-port.c:221
#, fuzzy, c-format
msgid "'%s' is not allowed in vlan_mode"
msgstr "'%s' एक वैध Wi-Fi अवस्था नहीं चाहिए"

#: ../libnm-core/nm-setting-ovs-port.c:231
#, c-format
msgid "the tag id must be in range 0-4094 but is %u"
msgstr ""

#: ../libnm-core/nm-setting-ovs-port.c:241
#, fuzzy, c-format
msgid "'%s' is not allowed in lacp"
msgstr "'%s' वैध DCB फ्लैग नहीं है"

#: ../libnm-core/nm-setting-ovs-port.c:251
#, fuzzy, c-format
msgid "'%s' is not allowed in bond_mode"
msgstr "'%s' एक वैध Wi-Fi अवस्था नहीं चाहिए"

#: ../libnm-core/nm-setting-ppp.c:352
#, c-format
msgid "'%d' is out of valid range <128-16384>"
msgstr "'%d' वैध परिसर के बाहर है <128-16384>"

#: ../libnm-core/nm-setting-ppp.c:365
#, c-format
msgid "setting this property requires non-zero '%s' property"
msgstr "इस गुण की सेटिंग के लिए गैर शून्य '%s' गुण चाहिए"

#: ../libnm-core/nm-setting-proxy.c:148
#, fuzzy, c-format
msgid "invalid proxy method"
msgstr "अवैध प्राथमिकता नक्शा '%s'"

#: ../libnm-core/nm-setting-proxy.c:158 ../libnm-core/nm-setting-proxy.c:167
#, fuzzy, c-format
msgid "this property is not allowed for method none"
msgstr "यह गुण '%s=%s' के लिए अनुमतिप्राप्त नहीं है"

#: ../libnm-core/nm-setting-proxy.c:178
#, c-format
msgid "the script is too large"
msgstr ""

#: ../libnm-core/nm-setting-proxy.c:186
#, fuzzy, c-format
msgid "the script is not valid utf8"
msgstr "सूची '%s' वैध नहीं है"

#: ../libnm-core/nm-setting-proxy.c:194
#, c-format
msgid "the script lacks FindProxyForURL function"
msgstr ""

#: ../libnm-core/nm-setting-sriov.c:1074
#, c-format
msgid "VF with index %u, but the total number of VFs is %u"
msgstr ""

#: ../libnm-core/nm-setting-sriov.c:1085
#, fuzzy, c-format
msgid "invalid VF %u: %s"
msgstr "अमान्य IPv4 पता '%s'"

#: ../libnm-core/nm-setting-sriov.c:1097
#, fuzzy, c-format
msgid "duplicate VF index %u"
msgstr "त्रुटि: अज्ञात सेटिंग '%s'\n"

#: ../libnm-core/nm-setting-sriov.c:1118
#, c-format
msgid "VFs %d and %d are not sorted by ascending index"
msgstr ""

#: ../libnm-core/nm-setting-tc-config.c:70
#: ../libnm-core/nm-setting-tc-config.c:436
#: ../libnm-core/nm-setting-tc-config.c:706
#, fuzzy, c-format
msgid "kind is missing"
msgstr "त्रुटि: %s तर्क अनुपस्थित है."

#: ../libnm-core/nm-setting-tc-config.c:78
#: ../libnm-core/nm-setting-tc-config.c:444
#: ../libnm-core/nm-setting-tc-config.c:714
#, fuzzy, c-format
msgid "'%s' is not a valid kind"
msgstr "'%s' एक वैध बांड नहीं है"

#: ../libnm-core/nm-setting-tc-config.c:86
#: ../libnm-core/nm-setting-tc-config.c:722
#, fuzzy
msgid "parent handle missing"
msgstr "गुण अनुपस्थित है"

#: ../libnm-core/nm-setting-tc-config.c:1292
msgid "there are duplicate TC qdiscs"
msgstr ""

#: ../libnm-core/nm-setting-tc-config.c:1312
msgid "there are duplicate TC filters"
msgstr ""

#: ../libnm-core/nm-setting-team.c:130 ../libnm-core/nm-setting-team.c:191
#: ../libnm-core/nm-setting-team.c:313
#, fuzzy, c-format
msgid "%s is out of range [0, %d]"
msgstr "मान '%d' परिसर के बाहर है <%d-%d>"

#: ../libnm-core/nm-setting-team.c:173
#, c-format
msgid "Missing target-host in nsna_ping link watcher"
msgstr ""

#: ../libnm-core/nm-setting-team.c:179 ../libnm-core/nm-setting-team.c:295
#, fuzzy, c-format
msgid "target-host '%s' contains invalid characters"
msgstr "IV गैर हेक्साडेसीमेल अंक समाहित करता है."

#: ../libnm-core/nm-setting-team.c:288
#, c-format
msgid "Missing %s in arp_ping link watcher"
msgstr ""

#: ../libnm-core/nm-setting-team.c:301
#, fuzzy, c-format
msgid "source-host '%s' contains invalid characters"
msgstr "IV गैर हेक्साडेसीमेल अंक समाहित करता है."

#: ../libnm-core/nm-setting-team.c:319
#, fuzzy
msgid "vlanid is out of range [-1, 4094]"
msgstr "मान '%d' परिसर के बाहर है <%d-%d>"

#: ../libnm-core/nm-setting-tun.c:167
#, fuzzy, c-format
msgid "'%u': invalid mode"
msgstr "'%s' एक वैध Wi-Fi अवस्था नहीं चाहिए"

#: ../libnm-core/nm-setting-tun.c:177
#, fuzzy, c-format
msgid "'%s': invalid user ID"
msgstr "'%s' वैध UUID नहीं है"

#: ../libnm-core/nm-setting-tun.c:188
#, fuzzy, c-format
msgid "'%s': invalid group ID"
msgstr "'%s' वैध UUID नहीं है"

#: ../libnm-core/nm-setting-user.c:109
#, fuzzy
msgid "missing key"
msgstr "%s' सेटिंग अनुपस्थित"

#: ../libnm-core/nm-setting-user.c:115
#, fuzzy
msgid "key is too long"
msgstr "त्रुटि: 'ssid' जरूरी है."

#: ../libnm-core/nm-setting-user.c:120
msgid "key must be UTF8"
msgstr ""

#: ../libnm-core/nm-setting-user.c:143
msgid "key requires a '.' for a namespace"
msgstr ""

#: ../libnm-core/nm-setting-user.c:156
msgid "key cannot contain \"..\""
msgstr ""

#: ../libnm-core/nm-setting-user.c:161
#, fuzzy
msgid "key contains invalid characters"
msgstr "IV गैर हेक्साडेसीमेल अंक समाहित करता है."

#: ../libnm-core/nm-setting-user.c:186
#, fuzzy
msgid "value is missing"
msgstr "त्रुटि: %s तर्क अनुपस्थित है."

#: ../libnm-core/nm-setting-user.c:193
#, fuzzy
msgid "value is too large"
msgstr "गुण रिक्त है"

#: ../libnm-core/nm-setting-user.c:199
#, fuzzy
msgid "value is not valid UTF8"
msgstr "सूची '%s' वैध नहीं है"

#: ../libnm-core/nm-setting-user.c:329
msgid "maximum number of user data entries reached"
msgstr ""

#: ../libnm-core/nm-setting-user.c:370
#, c-format
msgid "invalid key \"%s\": %s"
msgstr ""

#: ../libnm-core/nm-setting-user.c:389
#, c-format
msgid "maximum number of user data entries reached (%u instead of %u)"
msgstr ""

#: ../libnm-core/nm-setting-vlan.c:651
#, c-format
msgid "the vlan id must be in range 0-4094 but is %u"
msgstr ""

#: ../libnm-core/nm-setting-vlan.c:661
msgid "flags are invalid"
msgstr "पताका अवैध है"

#: ../libnm-core/nm-setting-vlan.c:673
msgid "vlan setting should have a ethernet setting as well"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:561
msgid "cannot set connection.multi-connect for VPN setting"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:582
#, fuzzy, c-format
msgid "secret was empty"
msgstr "गुण रिक्त है"

#: ../libnm-core/nm-setting-vpn.c:612
msgid "setting contained a secret with an empty name"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:620
#, c-format
msgid "secret value was empty"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:667 ../libnm-core/nm-setting.c:2211
msgid "not a secret property"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:673
msgid "secret is not of correct type"
msgstr ""

#: ../libnm-core/nm-setting-vpn.c:757
msgid "secret flags property not found"
msgstr ""

#: ../libnm-core/nm-setting-vxlan.c:367
#, fuzzy, c-format
msgid "'%s' is not a valid IP%c address"
msgstr "'%s' एक वैध MAC पता नहीं है"

#: ../libnm-core/nm-setting-vxlan.c:394
#, c-format
msgid "%d is greater than local port max %d"
msgstr ""

#: ../libnm-core/nm-setting-wired.c:754
#, c-format
msgid "'%s' is not a valid Ethernet port value"
msgstr "'%s' एक वैध इथरनेट पोर्ट मान नहीं है"

#: ../libnm-core/nm-setting-wired.c:764
#, c-format
msgid "'%s' is not a valid duplex value"
msgstr "'%s' एक वैध डुप्लेक्स मान नहीं है"

#: ../libnm-core/nm-setting-wired.c:826
#, c-format
msgid "invalid '%s' or its value '%s'"
msgstr "अवैध '%s' या इसका मान '%s'"

#: ../libnm-core/nm-setting-wired.c:863
msgid "Wake-on-LAN mode 'default' and 'ignore' are exclusive flags"
msgstr ""

#: ../libnm-core/nm-setting-wired.c:872
msgid "Wake-on-LAN password can only be used with magic packet mode"
msgstr ""

#: ../libnm-core/nm-setting-wired.c:897
msgid "both speed and duplex should have a valid value or both should be unset"
msgstr ""

#: ../libnm-core/nm-setting-wired.c:898
#, fuzzy
msgid "both speed and duplex are required for static link configuration"
msgstr "VPN सेवा ने अवैध विन्यास वापस किया"

#: ../libnm-core/nm-setting-wireguard.c:778
msgid "missing public-key for peer"
msgstr ""

#: ../libnm-core/nm-setting-wireguard.c:782
msgid "invalid public-key for peer"
msgstr ""

#: ../libnm-core/nm-setting-wireguard.c:791
#, fuzzy
msgid "invalid preshared-key for peer"
msgstr "अवैध निजी कुँजी"

#: ../libnm-core/nm-setting-wireguard.c:809
#, fuzzy
msgid "invalid endpoint for peer"
msgstr "जनक अंतरफलक [कोई नहीं]:"

#: ../libnm-core/nm-setting-wireguard.c:819
#, fuzzy, c-format
msgid "invalid IP address \"%s\" for allowed-ip of peer"
msgstr "अमान्य IPv4 पता '%s'"

#: ../libnm-core/nm-setting-wireguard.c:828
msgid "invalid preshared-key-flags for peer"
msgstr ""

#: ../libnm-core/nm-setting-wireguard.c:1567
#, c-format
msgid "peer #%u has no public-key"
msgstr ""

#: ../libnm-core/nm-setting-wireguard.c:1578
#, c-format
msgid "peer #%u has invalid public-key"
msgstr ""

#: ../libnm-core/nm-setting-wireguard.c:1592
#, c-format
msgid "peer #%u has invalid endpoint"
msgstr ""

#: ../libnm-core/nm-setting-wireguard.c:1622
#, c-format
msgid "peer #%u has invalid allowed-ips setting"
msgstr ""

#: ../libnm-core/nm-setting-wireguard.c:1634
#, fuzzy, c-format
msgid "peer #%u is invalid: %s"
msgstr "गुण अवैध है"

#: ../libnm-core/nm-setting-wireguard.c:1705
#: ../libnm-core/nm-setting-wireguard.c:1719
#, c-format
msgid "method \"%s\" is not supported for WireGuard"
msgstr ""

#: ../libnm-core/nm-setting-wireguard.c:1739
msgid "key must be 32 bytes base64 encoded"
msgstr ""

#: ../libnm-core/nm-setting-wireguard.c:1875
#, fuzzy
msgid "invalid peer secrets"
msgstr "अवैध VPN गुप्त"

#: ../libnm-core/nm-setting-wireguard.c:1898
#, c-format
msgid "peer #%u lacks public-key"
msgstr ""

#: ../libnm-core/nm-setting-wireguard.c:1912
#, c-format
msgid "non-existing peer '%s'"
msgstr ""

#: ../libnm-core/nm-setting-wireless-security.c:935
#, c-format
msgid "'%s' security requires '%s=%s'"
msgstr "'%s' सुरक्षा के लिए '%s=%s' चाहिए"

#: ../libnm-core/nm-setting-wireless-security.c:956
#, c-format
msgid "'%s' security requires '%s' setting presence"
msgstr "'%s' सुरक्षा के लिए '%s' सेटिंग उपस्थिति चाहिए"

#: ../libnm-core/nm-setting-wireless-security.c:977
#, c-format
msgid "'%d' value is out of range <0-3>"
msgstr "'%d' मान परिसर से बाहर है <0-3>"

#: ../libnm-core/nm-setting-wireless-security.c:1032
#, c-format
msgid "'%s' connections require '%s' in this property"
msgstr "'%s' कनेक्शन के लिए इस गुण में चाहिए '%s'"

#: ../libnm-core/nm-setting-wireless-security.c:1062
#, c-format
msgid "'%s' can only be used with '%s=%s' (WEP)"
msgstr "'%s' को '%s=%s' (WEP) के साथ केवल प्रयोग किया जा सकता है"

#: ../libnm-core/nm-setting-wireless-security.c:1086
#, c-format
msgid ""
"'%s' can only be used with 'wpa-eap', 'wpa-psk' or 'sae' key management "
msgstr ""

#: ../libnm-core/nm-setting-wireless.c:756
#, c-format
msgid "'%s' is not a valid Wi-Fi mode"
msgstr "'%s' एक वैध Wi-Fi अवस्था नहीं चाहिए"

#: ../libnm-core/nm-setting-wireless.c:766
#, c-format
msgid "'%s' is not a valid band"
msgstr "'%s' एक वैध बांड नहीं है"

#: ../libnm-core/nm-setting-wireless.c:776
#, fuzzy, c-format
msgid "'%s' requires setting '%s' property"
msgstr "सेटिंग '%s' गुण चाहिए"

#: ../libnm-core/nm-setting-wireless.c:870
#, fuzzy, c-format
msgid "invalid value"
msgstr "अवैध '%s' या इसका मान '%s'"

#: ../libnm-core/nm-setting-wireless.c:880
msgid "Wake-on-WLAN mode 'default' and 'ignore' are exclusive flags"
msgstr ""

#: ../libnm-core/nm-setting-wireless.c:889
msgid "Wake-on-WLAN trying to set unknown flag"
msgstr ""

#: ../libnm-core/nm-setting-wireless.c:911
#, c-format
msgid "conflicting value of mac-address-randomization and cloned-mac-address"
msgstr ""

#: ../libnm-core/nm-setting-wpan.c:185
msgid "page must be defined along with a channel"
msgstr ""

#: ../libnm-core/nm-setting-wpan.c:194
#, c-format
msgid "page must be between %d and %d"
msgstr ""

#: ../libnm-core/nm-setting-wpan.c:205
#, c-format
msgid "channel must not be between %d and %d"
msgstr ""

#: ../libnm-core/nm-setting.c:906
#, c-format
msgid "duplicate property"
msgstr ""

#: ../libnm-core/nm-setting.c:929
#, fuzzy, c-format
msgid "unknown property"
msgstr "अज्ञात त्रुटि"

#: ../libnm-core/nm-setting.c:1000 ../libnm-core/nm-setting.c:1049
#, c-format
msgid "can't set property of type '%s' from value of type '%s'"
msgstr ""

#: ../libnm-core/nm-setting.c:1019 ../libnm-core/nm-setting.c:1034
#, fuzzy, c-format
msgid "failed to set property: %s"
msgstr "त्रुटि: '%s' गुण सेट करने में विफल: %s\n"

#: ../libnm-core/nm-setting.c:1064
#, fuzzy, c-format
msgid "can not set property: %s"
msgstr "त्रुटि: '%s' गुण सेट करने में विफल: %s\n"

#: ../libnm-core/nm-setting.c:2102
msgid "secret not found"
msgstr ""

#: ../libnm-core/nm-team-utils.c:1241 ../libnm-core/nm-team-utils.c:1256
#, fuzzy, c-format
msgid "invalid D-Bus property \"%s\""
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-team-utils.c:1266
#, fuzzy, c-format
msgid "duplicate D-Bus property \"%s\""
msgstr "त्रुटि: '%s' गुण सेट करने में विफल: %s\n"

#: ../libnm-core/nm-team-utils.c:1287
#, fuzzy, c-format
msgid "invalid D-Bus property \"%s\" for \"%s\""
msgstr "अवैध क्षेत्र '%s'; अनुमतिप्राप्त क्षेत्र: %s"

#: ../libnm-core/nm-team-utils.c:1345
#, fuzzy, c-format
msgid "unknown link-watcher name \"%s\""
msgstr "अज्ञात लॉग डोमेन '%s'"

#: ../libnm-core/nm-team-utils.c:1903
#, fuzzy, c-format
msgid "missing runner"
msgstr "%s' सेटिंग अनुपस्थित"

#: ../libnm-core/nm-team-utils.c:1915
#, fuzzy, c-format
msgid "invalid runner \"%s\""
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-team-utils.c:1926
#, fuzzy, c-format
msgid "invalid runner.tx-hash"
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-team-utils.c:1944
#, fuzzy, c-format
msgid "missing link watcher name"
msgstr "अनुपस्थित विकल्प"

#: ../libnm-core/nm-team-utils.c:1947
#, fuzzy, c-format
msgid "unknown link watcher \"%s\""
msgstr "अज्ञात लॉग डोमेन '%s'"

#: ../libnm-core/nm-team-utils.c:1958
#, fuzzy, c-format
msgid "missing target host"
msgstr "%s' सेटिंग अनुपस्थित"

#: ../libnm-core/nm-team-utils.c:1965
#, fuzzy, c-format
msgid "missing source address"
msgstr "अमान्य IPv4 पता '%s'"

#: ../libnm-core/nm-team-utils.c:1978
#, c-format
msgid "team config exceeds size limit"
msgstr ""

#: ../libnm-core/nm-team-utils.c:1984
#, fuzzy, c-format
msgid "team config is not valid UTF-8"
msgstr "सूची '%s' वैध नहीं है"

#: ../libnm-core/nm-team-utils.c:1990
#: ../src/settings/plugins/ifcfg-rh/tests/test-ifcfg-rh.c:8969
#, fuzzy, c-format
msgid "invalid json"
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-team-utils.c:2137
#, fuzzy, c-format
msgid "invalid D-Bus type \"%s\""
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-team-utils.c:2162
#, fuzzy, c-format
msgid "invalid link-watchers: %s"
msgstr "अवैध IPv4 रूट '%s'"

#: ../libnm-core/nm-utils.c:2316
#, fuzzy, c-format
msgid "'%s' is not a valid handle."
msgstr "'%s' एक वैध बांड नहीं है"

#: ../libnm-core/nm-utils.c:2444
#, c-format
msgid "'%s' unexpected: parent already specified."
msgstr ""

#: ../libnm-core/nm-utils.c:2460
#, fuzzy, c-format
msgid "invalid handle: '%s'"
msgstr "अवैध विकल्प '%s'"

#: ../libnm-core/nm-utils.c:2482
#, fuzzy
msgid "parent not specified."
msgstr "कोई सेवा नाम उल्लेखित नहीं है"

#: ../libnm-core/nm-utils.c:2544
#, c-format
msgid "unsupported qdisc option: '%s'."
msgstr ""

#: ../libnm-core/nm-utils.c:2666
#, fuzzy
msgid "action name missing."
msgstr "गुण अनुपस्थित है"

#: ../libnm-core/nm-utils.c:2692
#, c-format
msgid "unsupported action option: '%s'."
msgstr ""

#: ../libnm-core/nm-utils.c:2830
#, fuzzy
msgid "invalid action: "
msgstr "अवैध विकल्प '%s'"

#: ../libnm-core/nm-utils.c:2834
#, c-format
msgid "unsupported tfilter option: '%s'."
msgstr ""

#: ../libnm-core/nm-utils.c:3435
#, fuzzy, c-format
msgid "failed stat file %s: %s"
msgstr "संकेत मुखौटा सेट करने में विफल: %d"

#: ../libnm-core/nm-utils.c:3444
#, fuzzy, c-format
msgid "not a file (%s)"
msgstr "'%s' फ़ाइल को लोड नही कर सका\n"

#: ../libnm-core/nm-utils.c:3455
#, fuzzy, c-format
msgid "invalid file owner %d for %s"
msgstr "अवैध क्षेत्र '%s'; अनुमतिप्राप्त क्षेत्र: %s"

#: ../libnm-core/nm-utils.c:3466
#, c-format
msgid "file permissions for %s"
msgstr ""

#: ../libnm-core/nm-utils.c:3476
#, c-format
msgid "reject %s"
msgstr ""

#: ../libnm-core/nm-utils.c:3495
#, c-format
msgid "path is not absolute (%s)"
msgstr ""

#: ../libnm-core/nm-utils.c:3509
#, c-format
msgid "Plugin file does not exist (%s)"
msgstr ""

#: ../libnm-core/nm-utils.c:3517
#, fuzzy, c-format
msgid "Plugin is not a valid file (%s)"
msgstr "'%s' '%s' के लिए वैध मान नहीं है"

#: ../libnm-core/nm-utils.c:3527
#, c-format
msgid "libtool archives are not supported (%s)"
msgstr ""

#: ../libnm-core/nm-utils.c:3609
#, c-format
msgid "Could not find \"%s\" binary"
msgstr ""

#: ../libnm-core/nm-utils.c:4462
#, fuzzy
msgid "unknown secret flags"
msgstr "त्रुटि: अज्ञात सेटिंग '%s'\n"

#: ../libnm-core/nm-utils.c:4472
msgid "conflicting secret flags"
msgstr ""

#: ../libnm-core/nm-utils.c:4483
msgid "secret flags must not be \"not-required\""
msgstr ""

#: ../libnm-core/nm-utils.c:4491
msgid "unsupported secret flags"
msgstr ""

#: ../libnm-core/nm-utils.c:4521
msgid "can't be simultaneously disabled and enabled"
msgstr ""

#: ../libnm-core/nm-utils.c:4529
#, fuzzy
msgid "WPS is required"
msgstr "पिन कोड जरूरी"

#: ../libnm-core/nm-utils.c:4595
#, fuzzy, c-format
msgid "not a valid ethernet MAC address for mask at position %lld"
msgstr "'%s'एक वैध IPv4 पता '%s' विकल्प के लिए नहीं है"

#: ../libnm-core/nm-utils.c:4610
#, c-format
msgid "not a valid ethernet MAC address #%u at position %lld"
msgstr ""

#: ../libnm-core/nm-utils.c:4669
#, fuzzy
msgid "interface name is too short"
msgstr "अंतरफलक नाम [*]:"

#: ../libnm-core/nm-utils.c:4678
#, fuzzy
msgid "interface name is reserved"
msgstr "अंतरफलक नाम [*]:"

#: ../libnm-core/nm-utils.c:4690
msgid "interface name contains an invalid character"
msgstr ""

#: ../libnm-core/nm-utils.c:4696
msgid "interface name is longer than 15 characters"
msgstr ""

#: ../libnm-core/nm-utils.c:5356
msgid "not valid utf-8"
msgstr ""

#: ../libnm-core/nm-utils.c:5377 ../libnm-core/nm-utils.c:5430
msgid "is not a JSON object"
msgstr ""

#: ../libnm-core/nm-utils.c:5406 ../libnm-core/nm-utils.c:5443
msgid "value is NULL"
msgstr ""

#: ../libnm-core/nm-utils.c:5406 ../libnm-core/nm-utils.c:5443
#, fuzzy
msgid "value is empty"
msgstr "गुण रिक्त है"

#: ../libnm-core/nm-utils.c:5418
#, fuzzy, c-format
msgid "invalid JSON at position %d (%s)"
msgstr "अवैध विकल्प '%s'"

#: ../libnm-core/nm-utils.c:5538 ../libnm-core/nm-utils.c:5558
msgid "unterminated escape sequence"
msgstr ""

#: ../libnm-core/nm-utils.c:5583
#, fuzzy, c-format
msgid "unknown attribute '%s'"
msgstr "अज्ञात युक्ति '%s'."

#: ../libnm-core/nm-utils.c:5598
#, c-format
msgid "missing key-value separator '%c' after '%s'"
msgstr ""

#: ../libnm-core/nm-utils.c:5614
#, fuzzy, c-format
msgid "invalid uint32 value '%s' for attribute '%s'"
msgstr "'%s' अवैध विकल्प या इसका मान '%s'"

#: ../libnm-core/nm-utils.c:5623
#, fuzzy, c-format
msgid "invalid uint8 value '%s' for attribute '%s'"
msgstr "'%s' अवैध विकल्प या इसका मान '%s'"

#: ../libnm-core/nm-utils.c:5633
#, fuzzy, c-format
msgid "invalid boolean value '%s' for attribute '%s'"
msgstr "'%s' अवैध विकल्प या इसका मान '%s'"

#: ../libnm-core/nm-utils.c:5643
#, c-format
msgid "unsupported attribute '%s' of type '%s'"
msgstr ""

#: ../libnm-core/nm-utils.c:5992
#, c-format
msgid "Bridge VLANs %d and %d are not sorted by ascending vid"
msgstr ""

#: ../libnm-core/nm-utils.c:6016
#, fuzzy, c-format
msgid "duplicate bridge VLAN vid %u"
msgstr "त्रुटि: अज्ञात सेटिंग '%s'\n"

#: ../libnm-core/nm-utils.c:6028
msgid "only one VLAN can be the PVID"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:296
#, c-format
msgid "cannot load plugin \"%s\": %s"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:307
#, c-format
msgid "failed to load nm_vpn_editor_plugin_factory() from %s (%s)"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:332
#, c-format
msgid "unknown error initializing plugin %s"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:349
#, c-format
msgid "cannot load VPN plugin in '%s': missing plugin name"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:358
#, c-format
msgid "cannot load VPN plugin in '%s': invalid service name"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:501
#, c-format
msgid "the plugin does not support import capability"
msgstr ""

#: ../libnm-core/nm-vpn-editor-plugin.c:521
#, c-format
msgid "the plugin does not support export capability"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:108
#, fuzzy, c-format
msgid "missing filename"
msgstr "अनुपस्थित विकल्प"

#: ../libnm-core/nm-vpn-plugin-info.c:116
#, c-format
msgid "filename must be an absolute path (%s)"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:125
#, c-format
msgid "filename has invalid format (%s)"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:448
#, c-format
msgid "there exists a conflicting plugin (%s) that has the same %s.%s value"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:486
#, c-format
msgid "there exists a conflicting plugin with the same name (%s)"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:1068
#, fuzzy, c-format
msgid "missing \"plugin\" setting"
msgstr "%s' सेटिंग अनुपस्थित"

#: ../libnm-core/nm-vpn-plugin-info.c:1078
#, c-format
msgid "%s: don't retry loading plugin which already failed previously"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:1154
msgid "missing filename to load VPN plugin info"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:1166
msgid "missing name for VPN plugin info"
msgstr ""

#: ../libnm-core/nm-vpn-plugin-info.c:1175
msgid "missing service for VPN plugin info"
msgstr ""

#: ../libnm/nm-device-adsl.c:69
#, fuzzy
msgid "The connection was not an ADSL connection."
msgstr "जुड़ रहा हैं (माध्यमिक कनेक्शन शुरू करने के लिए)"

#: ../libnm/nm-device-bond.c:109
#, fuzzy
msgid "The connection was not a bond connection."
msgstr "जुड़ रहा हैं (माध्यमिक कनेक्शन शुरू करने के लिए)"

#: ../libnm/nm-device-bridge.c:113
#, fuzzy
msgid "The connection was not a bridge connection."
msgstr "जुड़ रहा हैं (माध्यमिक कनेक्शन शुरू करने के लिए)"

#: ../libnm/nm-device-bt.c:135
#, fuzzy, c-format
msgid "The connection was not a Bluetooth connection."
msgstr "1 वैकल्पिक वितर्क हैं 'ब्लूटूथ' कनेक्शन प्रकार के लिए.\n"

#: ../libnm/nm-device-bt.c:141
#, fuzzy, c-format
msgid "The connection is of Bluetooth NAP type."
msgstr "1 वैकल्पिक वितर्क हैं 'ब्लूटूथ' कनेक्शन प्रकार के लिए.\n"

#: ../libnm/nm-device-bt.c:150
msgid "Invalid device Bluetooth address."
msgstr ""

#: ../libnm/nm-device-bt.c:156
msgid "The Bluetooth addresses of the device and the connection didn't match."
msgstr ""

#: ../libnm/nm-device-bt.c:165
msgid ""
"The device is lacking Bluetooth capabilities required by the connection."
msgstr ""

#: ../libnm/nm-device-dummy.c:75
#, fuzzy
msgid "The connection was not a dummy connection."
msgstr "कनेक्शन हटाया गया था"

#: ../libnm/nm-device-dummy.c:82 ../libnm/nm-device-generic.c:96
#: ../libnm/nm-device-ovs-bridge.c:96 ../libnm/nm-device-ovs-interface.c:67
#: ../libnm/nm-device-ovs-port.c:96
#, fuzzy
msgid "The connection did not specify an interface name."
msgstr "InfiniBand P_Key कनेक्शन जनक अंतरफलक नाम निर्दिष्ट नहीं कर रहा है"

#: ../libnm/nm-device-ethernet.c:204
#, fuzzy
msgid "The connection was not an Ethernet or PPPoE connection."
msgstr "4 वैकल्पिक वितर्क हैं 'PPPoE' कनेक्शन प्रकार के लिए.\n"

#: ../libnm/nm-device-ethernet.c:219
msgid "The connection and device differ in S390 subchannels."
msgstr ""

#: ../libnm/nm-device-ethernet.c:234
#, fuzzy, c-format
msgid "Invalid device MAC address %s."
msgstr "एक वैध MAC पता नहीं है"

#: ../libnm/nm-device-ethernet.c:239
msgid "The MACs of the device and the connection do not match."
msgstr ""

#: ../libnm/nm-device-ethernet.c:249
#, c-format
msgid "Invalid MAC in the blacklist: %s."
msgstr ""

#: ../libnm/nm-device-ethernet.c:255
#, c-format
msgid "Device MAC (%s) is blacklisted by the connection."
msgstr ""

#: ../libnm/nm-device-generic.c:89
#, fuzzy
msgid "The connection was not a generic connection."
msgstr "जुड़ रहा हैं (माध्यमिक कनेक्शन शुरू करने के लिए)"

#: ../libnm/nm-device-infiniband.c:91
#, fuzzy
msgid "The connection was not an InfiniBand connection."
msgstr "5 वैकल्पिक वितर्क हैं 'InfiniBand' कनेक्शन प्रकार के लिए.\n"

#: ../libnm/nm-device-infiniband.c:99 ../libnm/nm-device-wifi.c:622
#: ../libnm/nm-device-wimax.c:322
#, fuzzy
msgid "Invalid device MAC address."
msgstr "एक वैध MAC पता नहीं है"

#: ../libnm/nm-device-infiniband.c:107 ../libnm/nm-device-wifi.c:629
#: ../libnm/nm-device-wimax.c:329
msgid "The MACs of the device and the connection didn't match."
msgstr ""

#: ../libnm/nm-device-ip-tunnel.c:269
#, fuzzy
msgid "The connection was not an IP tunnel connection."
msgstr "जुड़ रहा हैं (माध्यमिक कनेक्शन शुरू करने के लिए)"

#: ../libnm/nm-device-macvlan.c:155
msgid "The connection was not a MAC-VLAN connection."
msgstr ""

#: ../libnm/nm-device-modem.c:117
#, fuzzy
msgid "The connection was not a modem connection."
msgstr "कनेक्शन हटाया गया था"

#: ../libnm/nm-device-modem.c:125
#, fuzzy
msgid "The connection was not a valid modem connection."
msgstr "जुड़ रहा हैं (माध्यमिक कनेक्शन शुरू करने के लिए)"

#: ../libnm/nm-device-modem.c:132
msgid "The device is lacking capabilities required by the connection."
msgstr ""

#: ../libnm/nm-device-olpc-mesh.c:112
#, fuzzy
msgid "The connection was not an OLPC Mesh connection."
msgstr "2 वैकल्पिक वितर्क हैं 'ओएलपीसी मेश' कनेक्शन प्रकार के लिए.\n"

#: ../libnm/nm-device-ovs-bridge.c:89
#, fuzzy
msgid "The connection was not a ovs_bridge connection."
msgstr "जुड़ रहा हैं (माध्यमिक कनेक्शन शुरू करने के लिए)"

#: ../libnm/nm-device-ovs-interface.c:60
#, fuzzy
msgid "The connection was not a ovs_interface connection."
msgstr "कनेक्शन हटाया गया था"

#: ../libnm/nm-device-ovs-port.c:89
#, fuzzy
msgid "The connection was not a ovs_port connection."
msgstr "जुड़ रहा हैं (माध्यमिक कनेक्शन शुरू करने के लिए)"

#: ../libnm/nm-device-team.c:136
#, fuzzy
msgid "The connection was not a team connection."
msgstr "कनेक्शन हटाया गया था"

#: ../libnm/nm-device-tun.c:207
#, fuzzy
msgid "The connection was not a tun connection."
msgstr "जुड़ रहा हैं (माध्यमिक कनेक्शन शुरू करने के लिए)"

#: ../libnm/nm-device-tun.c:216
#, fuzzy
msgid "The mode of the device and the connection didn't match"
msgstr "उपकरण सक्रिय कनेक्शन गायब हो गया"

#: ../libnm/nm-device-vlan.c:126
#, fuzzy
msgid "The connection was not a VLAN connection."
msgstr "4 वैकल्पिक वितर्क हैं 'वीलैन' कनेक्शन प्रकार के लिए.\n"

#: ../libnm/nm-device-vlan.c:133
msgid "The VLAN identifiers of the device and the connection didn't match."
msgstr ""

#: ../libnm/nm-device-vlan.c:148
msgid "The hardware address of the device and the connection didn't match."
msgstr ""

#: ../libnm/nm-device-vxlan.c:384
#, fuzzy
msgid "The connection was not a VXLAN connection."
msgstr "4 वैकल्पिक वितर्क हैं 'वीलैन' कनेक्शन प्रकार के लिए.\n"

#: ../libnm/nm-device-vxlan.c:391
msgid "The VXLAN identifiers of the device and the connection didn't match."
msgstr ""

#: ../libnm/nm-device-wifi-p2p.c:326
#, fuzzy
msgid "The connection was not a Wi-Fi P2P connection."
msgstr "1 वैकल्पिक वितर्क हैं 'WiMax' कनेक्शन प्रकार के लिए.\n"

#: ../libnm/nm-device-wifi.c:613
msgid "The connection was not a Wi-Fi connection."
msgstr ""

#: ../libnm/nm-device-wifi.c:649
msgid "The device is lacking WPA capabilities required by the connection."
msgstr ""

#: ../libnm/nm-device-wifi.c:656
msgid "The device is lacking WPA2/RSN capabilities required by the connection."
msgstr ""

#: ../libnm/nm-device-wimax.c:313
#, fuzzy
msgid "The connection was not a WiMAX connection."
msgstr "1 वैकल्पिक वितर्क हैं 'WiMax' कनेक्शन प्रकार के लिए.\n"

#: ../libnm/nm-device-wpan.c:81
#, fuzzy
msgid "The connection was not a wpan connection."
msgstr "जुड़ रहा हैं (माध्यमिक कनेक्शन शुरू करने के लिए)"

#: ../libnm/nm-device.c:1384
msgid "Bluetooth"
msgstr "ब्लूटूथ"

#: ../libnm/nm-device.c:1386
msgid "OLPC Mesh"
msgstr "OLPC जाल"

#: ../libnm/nm-device.c:1388
msgid "Open vSwitch Interface"
msgstr ""

#: ../libnm/nm-device.c:1390
msgid "Open vSwitch Port"
msgstr ""

#: ../libnm/nm-device.c:1392
msgid "Open vSwitch Bridge"
msgstr ""

#: ../libnm/nm-device.c:1394
msgid "WiMAX"
msgstr "WiMAX"

#: ../libnm/nm-device.c:1408
msgid "ADSL"
msgstr "ADSL"

#: ../libnm/nm-device.c:1410
#, fuzzy
msgid "MACVLAN"
msgstr "VLAN"

#: ../libnm/nm-device.c:1412
msgid "VXLAN"
msgstr ""

#: ../libnm/nm-device.c:1414
msgid "IPTunnel"
msgstr ""

#: ../libnm/nm-device.c:1416
msgid "Tun"
msgstr ""

#: ../libnm/nm-device.c:1418
msgid "Veth"
msgstr ""

#: ../libnm/nm-device.c:1420
msgid "MACsec"
msgstr ""

#: ../libnm/nm-device.c:1422
msgid "Dummy"
msgstr ""

#: ../libnm/nm-device.c:1424
#, fuzzy
msgid "PPP"
msgstr "PPPoE"

#: ../libnm/nm-device.c:1426
msgid "IEEE 802.15.4"
msgstr ""

#: ../libnm/nm-device.c:1428
msgid "6LoWPAN"
msgstr ""

#: ../libnm/nm-device.c:1430
#, fuzzy
msgid "WireGuard"
msgstr "तारसहित"

#: ../libnm/nm-device.c:1432
#, fuzzy
msgid "Wi-Fi P2P"
msgstr "वाई-फाई"

#: ../libnm/nm-device.c:1464
msgid "Wired"
msgstr "तारसहित"

#: ../libnm/nm-device.c:1495
msgid "PCI"
msgstr "पीसीआई"

#: ../libnm/nm-device.c:1497
msgid "USB"
msgstr "यूएसबी"

#. TRANSLATORS: the first %s is a bus name (eg, "USB") or
#. * product name, the second is a device type (eg,
#. * "Ethernet"). You can change this to something like
#. * "%2$s (%1$s)" if there's no grammatical way to combine
#. * the strings otherwise.
#.
#: ../libnm/nm-device.c:1810 ../libnm/nm-device.c:1829
#, c-format
msgctxt "long device name"
msgid "%s %s"
msgstr "%s %s"

#: ../libnm/nm-device.c:2551
#, fuzzy, c-format
msgid "The connection was not valid: %s"
msgstr "त्रुटि: कनेक्शन वैध नहीं है: %s\n"

#: ../libnm/nm-device.c:2560
#, c-format
msgid "The interface names of the device and the connection didn't match."
msgstr ""

#: ../libnm/nm-manager.c:272
#, fuzzy
msgid "Checkpoint was removed before it was initialized"
msgstr "सक्रिय कनेक्शन विवरण"

#: ../libnm/nm-manager.c:993
#, fuzzy
msgid "Active connection removed before it was initialized"
msgstr "सक्रिय कनेक्शन विवरण"

#: ../libnm/nm-remote-settings.c:253
msgid "Connection removed before it was initialized"
msgstr ""

#: ../libnm/nm-vpn-plugin-old.c:846 ../libnm/nm-vpn-service-plugin.c:1045
msgid "No service name specified"
msgstr "कोई सेवा नाम उल्लेखित नहीं है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:1
msgid "Enable or disable system networking"
msgstr "तंत्र संजालन सक्रिय या निष्क्रिय करें"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:2
msgid "System policy prevents enabling or disabling system networking"
msgstr "तंत्र संजालन के युक्ति के सक्रियण या निष्क्रियण को तंत्र नीति रोकता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:3
#, fuzzy
msgid "Reload NetworkManager configuration"
msgstr "छापें नेटवर्कप्रबंधक संस्करण और बाहर निकलें"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:4
#, fuzzy
msgid "System policy prevents reloading NetworkManager"
msgstr "तंत्र संजालन के युक्ति के सक्रियण या निष्क्रियण को तंत्र नीति रोकता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:5
msgid ""
"Put NetworkManager to sleep or wake it up (should only be used by system "
"power management)"
msgstr ""
" NetworkManager को स्लीप स्थिति या वेकअप स्थिति में रखें (केवल सिस्टम पावर मैनेजमेंट के "
"द्वारा प्रयोग किया जाएगा)"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:6
msgid "System policy prevents putting NetworkManager to sleep or waking it up"
msgstr "NetworkManager को स्लीप या वेकअप स्थिति में लाने के लिए नेटवर्कमैनेजर रोकता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:7
msgid "Enable or disable Wi-Fi devices"
msgstr "Wi-Fi युक्तियाँ सक्रिय या निष्क्रिय करें"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:8
msgid "System policy prevents enabling or disabling Wi-Fi devices"
msgstr "Wi-Fi युक्ति के सक्रियण या निष्क्रियण को तंत्र नीति रोकता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:9
msgid "Enable or disable mobile broadband devices"
msgstr "मोबाइल ब्राडबैंड युक्तियाँ सक्रिय या निष्क्रिय करें"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:10
msgid "System policy prevents enabling or disabling mobile broadband devices"
msgstr "मोबाइल ब्रॉडबैंड युक्ति के सक्रियण या निष्क्रियण को तंत्र नीति रोकता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:11
msgid "Enable or disable WiMAX mobile broadband devices"
msgstr "WiMAX मोबाइल ब्राडबैंड युक्तियाँ सक्रिय या निष्क्रिय करें"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:12
msgid ""
"System policy prevents enabling or disabling WiMAX mobile broadband devices"
msgstr "WiMAX मोबाइल ब्रॉडबैंड युक्ति के सक्रियण या निष्क्रियण को तंत्र नीति रोकता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:13
msgid "Allow control of network connections"
msgstr "संजाल कनेक्शन के नियंत्रण स्वीकार करें"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:14
msgid "System policy prevents control of network connections"
msgstr "सिस्टम कनेक्शन के नियंत्रण को सिस्टम नीति रोकता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:15
#, fuzzy
msgid "Allow control of Wi-Fi scans"
msgstr "संजाल कनेक्शन के नियंत्रण स्वीकार करें"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:16
#, fuzzy
msgid "System policy prevents Wi-Fi scans"
msgstr "Wi-Fi युक्ति के सक्रियण या निष्क्रियण को तंत्र नीति रोकता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:17
msgid "Connection sharing via a protected Wi-Fi network"
msgstr "किसी संरक्षित Wi-Fi संजाल के द्वारा कनेक्शन साझा"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:18
msgid ""
"System policy prevents sharing connections via a protected Wi-Fi network"
msgstr "किसी संरक्षित Wi-Fi संजाल के द्वारा साझा कनेक्शन को सिस्टम नीति रोकता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:19
msgid "Connection sharing via an open Wi-Fi network"
msgstr "किसी खुले Wi-Fi संजाल के द्वारा कनेक्शन साझा"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:20
msgid "System policy prevents sharing connections via an open Wi-Fi network"
msgstr "किसी खुले Wi-Fi संजाल के द्वारा साझा कनेक्शन को सिस्टम नीति रोकता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:21
msgid "Modify personal network connections"
msgstr "निजी संजाल कनेक्शन संशोधित करें"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:22
msgid "System policy prevents modification of personal network settings"
msgstr "प्रणाली नीति व्यक्तिगत संजाल सेटिंग के संशोधन से बचाता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:23
msgid "Modify network connections for all users"
msgstr "सभी उपयोगकर्ताओं के लिए संजाल  कनेक्शन संशोधित करें"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:24
msgid "System policy prevents modification of network settings for all users"
msgstr "प्रणाली नीति सभी उपयोगकर्ताओं के लिए संजाल सेटिंग के संशोधन से बचाता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:25
msgid "Modify persistent system hostname"
msgstr "स्थिर सिस्टम होस्टनेम को सुधारें"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:26
msgid "System policy prevents modification of the persistent system hostname"
msgstr "सिस्टम नीति स्थिर सिस्टम होस्टनेम के रूपांतरण को रोकता है."

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:27
msgid "Modify persistent global DNS configuration"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:28
#, fuzzy
msgid ""
"System policy prevents modification of the persistent global DNS "
"configuration"
msgstr "सिस्टम नीति स्थिर सिस्टम होस्टनेम के रूपांतरण को रोकता है."

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:29
msgid "Perform a checkpoint or rollback of interfaces configuration"
msgstr ""

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:30
#, fuzzy
msgid "System policy prevents the creation of a checkpoint or its rollback"
msgstr "सिस्टम नीति स्थिर सिस्टम होस्टनेम के रूपांतरण को रोकता है."

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:31
#, fuzzy
msgid "Enable or disable device statistics"
msgstr "Wi-Fi युक्तियाँ सक्रिय या निष्क्रिय करें"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:32
#, fuzzy
msgid "System policy prevents enabling or disabling device statistics"
msgstr "Wi-Fi युक्ति के सक्रियण या निष्क्रियण को तंत्र नीति रोकता है"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:33
#, fuzzy
msgid "Enable or disable connectivity checking"
msgstr "तंत्र संजालन सक्रिय या निष्क्रिय करें"

#: ../data/org.freedesktop.NetworkManager.policy.in.in.h:34
#, fuzzy
msgid "System policy prevents enabling or disabling connectivity checking"
msgstr "तंत्र संजालन के युक्ति के सक्रियण या निष्क्रियण को तंत्र नीति रोकता है"

#: ../shared/nm-glib-aux/nm-shared-utils.c:1481
#, c-format
msgid "object class '%s' has no property named '%s'"
msgstr ""

#: ../shared/nm-glib-aux/nm-shared-utils.c:1488
#, c-format
msgid "property '%s' of object class '%s' is not writable"
msgstr ""

#: ../shared/nm-glib-aux/nm-shared-utils.c:1495
#, c-format
msgid ""
"construct property \"%s\" for object '%s' can't be set after construction"
msgstr ""

#: ../shared/nm-glib-aux/nm-shared-utils.c:1503
#, c-format
msgid "'%s::%s' is not a valid property name; '%s' is not a GObject subtype"
msgstr ""

#: ../shared/nm-glib-aux/nm-shared-utils.c:1512
#, c-format
msgid "unable to set property '%s' of type '%s' from value of type '%s'"
msgstr ""

#: ../shared/nm-glib-aux/nm-shared-utils.c:1523
#, c-format
msgid ""
"value \"%s\" of type '%s' is invalid or out of range for property '%s' of "
"type '%s'"
msgstr ""

#: ../shared/nm-libnm-core-aux/nm-libnm-core-aux.c:236
#, fuzzy, c-format
msgid "'%s' is not valid: properties should be specified as 'key=value'"
msgstr "'%s' वैध नहीं है; 3 स्ट्रिंग दिया जाना चाहिए"

#: ../shared/nm-libnm-core-aux/nm-libnm-core-aux.c:251
#, fuzzy, c-format
msgid "'%s' is not a valid key"
msgstr "'%s' एक वैध बांड नहीं है"

#: ../shared/nm-libnm-core-aux/nm-libnm-core-aux.c:257
#, fuzzy, c-format
msgid "duplicate key '%s'"
msgstr "त्रुटि: अज्ञात सेटिंग '%s'\n"

#: ../shared/nm-libnm-core-aux/nm-libnm-core-aux.c:271
#, fuzzy, c-format
msgid "number for '%s' is out of range"
msgstr "मान '%d' परिसर के बाहर है <%d-%d>"

#: ../shared/nm-libnm-core-aux/nm-libnm-core-aux.c:274
#, fuzzy, c-format
msgid "value for '%s' must be a number"
msgstr "'%s' संख्या नहीं है"

#: ../shared/nm-libnm-core-aux/nm-libnm-core-aux.c:285
#, c-format
msgid "value for '%s' must be a boolean"
msgstr ""

#: ../shared/nm-libnm-core-aux/nm-libnm-core-aux.c:294
#, fuzzy
msgid "missing 'name' attribute"
msgstr "%s' सेटिंग अनुपस्थित"

#: ../shared/nm-libnm-core-aux/nm-libnm-core-aux.c:301
#, fuzzy, c-format
msgid "invalid 'name' \"%s\""
msgstr "अवैध IPv4 रूट '%s'"

#: ../shared/nm-libnm-core-aux/nm-libnm-core-aux.c:313
#, fuzzy, c-format
msgid "attribute '%s' is invalid for \"%s\""
msgstr "'%s' '%s' के लिए वैध मान नहीं है"

#. TRANSLATORS: the first %s is a prefix for the connection id, such
#. * as "Wired Connection" or "VPN Connection". The %d is a number
#. * that is combined with the first argument to create a unique
#. * connection id.
#: ../src/NetworkManagerUtils.c:122
#, fuzzy, c-format
msgctxt "connection id fallback"
msgid "%s %u"
msgstr "%s %d"

#: ../src/main.c:177 ../src/main.c:342
#, fuzzy, c-format
msgid "Failed to read configuration: %s\n"
msgstr "विन्यास को पढ़ने में असफ़ल: (%d) %s\n"

#. Logging/debugging
#: ../src/main.c:191 ../src/nm-iface-helper.c:293
msgid "Print NetworkManager version and exit"
msgstr "छापें नेटवर्कप्रबंधक संस्करण और बाहर निकलें"

#: ../src/main.c:192 ../src/nm-iface-helper.c:294
msgid "Don't become a daemon"
msgstr "डेमॉन न होयें"

#: ../src/main.c:193 ../src/nm-iface-helper.c:296
#, c-format
msgid "Log level: one of [%s]"
msgstr "लॉग स्तर: [%s] में से एक"

#: ../src/main.c:195 ../src/nm-iface-helper.c:298
#, c-format
msgid "Log domains separated by ',': any combination of [%s]"
msgstr "लॉग डोमेन ',' से अलग: [%s] का कोई संयोग"

#: ../src/main.c:197 ../src/nm-iface-helper.c:300
msgid "Make all warnings fatal"
msgstr "सभी चेतावनी गंभीर बनाएँ"

#: ../src/main.c:198
msgid "Specify the location of a PID file"
msgstr "एक पीआईडी ​​फ़ाइल का स्थान निर्दिष्ट करें"

#: ../src/main.c:200
#, fuzzy
msgid "Print NetworkManager configuration and exit"
msgstr "छापें नेटवर्कप्रबंधक संस्करण और बाहर निकलें"

#: ../src/main.c:210
msgid ""
"NetworkManager monitors all network connections and automatically\n"
"chooses the best connection to use.  It also allows the user to\n"
"specify wireless access points which wireless cards in the computer\n"
"should associate with."
msgstr ""
"नेटवर्कप्रबंधक सभी नेटवर्क कनेक्शन पर नज़र रखता है और \n"
"स्वचालित रूप से सबसे अच्छा उपयोग करने के लिए कनेक्शन को \n"
" चुनता है. यह भी उपयोगकर्ता बेतार पहुँच बिंदु है जो कंप्यूटर में वायरलेस \n"
" कार्ड के साथ संबद्ध करना चाहिए निर्दिष्ट करने की अनुमति देता है."

#: ../src/main.c:332 ../src/main-utils.c:290 ../src/nm-iface-helper.c:439
#, c-format
msgid "%s.  Please use --help to see a list of valid options.\n"
msgstr "%s.  कृपया --help का उपयोग वैध विकल्प देने के लिए करें.\n"

#: ../src/main.c:365 ../src/nm-iface-helper.c:452
#, c-format
msgid "Could not daemonize: %s [error %u]\n"
msgstr "daemonize नहीं कर सका: %s [error %u]\n"

#: ../src/main-utils.c:100
#, c-format
msgid "Opening %s failed: %s\n"
msgstr " %s को खोलना असफल: %s\n"

#: ../src/main-utils.c:107
#, c-format
msgid "Writing to %s failed: %s\n"
msgstr " %s पे लिखने में असफल: %s\n"

#: ../src/main-utils.c:113
#, c-format
msgid "Closing %s failed: %s\n"
msgstr "समापन %s में विफल रहा है: %s\n"

#: ../src/main-utils.c:152 ../src/main-utils.c:163
#, fuzzy, c-format
msgid "Cannot create '%s': %s"
msgstr "सेट नहीं कर सकता '"

#: ../src/main-utils.c:216
#, fuzzy, c-format
msgid "%s is already running (pid %ld)\n"
msgstr "नेटवर्कप्रबंधक पहले से ही चल रहा है (pid %ld)\n"

#: ../src/main-utils.c:226
#, fuzzy, c-format
msgid "You must be root to run %s!\n"
msgstr " नेटवर्कप्रबंधक! चलाने के लिए आपको रूट होना होगा\n"

#: ../src/dhcp/nm-dhcp-dhclient-utils.c:302
msgid "# Created by NetworkManager\n"
msgstr "# संजाल प्रबंधक द्वारा निर्मित\n"

#: ../src/dhcp/nm-dhcp-dhclient-utils.c:313
#, c-format
msgid ""
"# Merged from %s\n"
"\n"
msgstr ""
"#%s से मिलाया गया\n"
"\n"

#: ../src/devices/bluetooth/nm-bluez-device.c:210
#, c-format
msgid "%s Network"
msgstr "%s संजाल"

#: ../src/devices/bluetooth/nm-device-bt.c:272
msgid "PAN requested, but Bluetooth device does not support NAP"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:282
msgid "PAN connections cannot specify GSM, CDMA, or serial settings"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:295
msgid "PAN connection"
msgstr "PAN कनेक्शन"

#: ../src/devices/bluetooth/nm-device-bt.c:302
msgid "DUN requested, but Bluetooth device does not support DUN"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:312
msgid "DUN connection must include a GSM or CDMA setting"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:322
#: ../src/devices/wwan/nm-modem-broadband.c:702
msgid "GSM connection"
msgstr "GSM कनेक्शन"

#: ../src/devices/bluetooth/nm-device-bt.c:324
#: ../src/devices/wwan/nm-modem-broadband.c:726
msgid "CDMA connection"
msgstr "CDMA कनेक्शन"

#: ../src/devices/bluetooth/nm-device-bt.c:332
msgid "Unknown/unhandled Bluetooth connection type"
msgstr ""

#: ../src/devices/bluetooth/nm-device-bt.c:353
#: ../src/devices/nm-device-ethernet.c:1432
#: ../src/devices/nm-device-infiniband.c:190
#: ../src/devices/wifi/nm-device-wifi.c:925
#, fuzzy
msgid "connection does not match device"
msgstr "कनेक्शन किस्म '%s' वैध नहीं है"

#: ../src/devices/nm-device-6lowpan.c:191
#, fuzzy
msgid "6LOWPAN connection"
msgstr "PAN कनेक्शन"

#: ../src/devices/nm-device-bond.c:71
msgid "Bond connection"
msgstr "बॉण्ड कनेक्शन"

#: ../src/devices/nm-device-bridge.c:154
msgid "Bridge connection"
msgstr "ब्रिज कनेक्शन"

#: ../src/devices/nm-device-dummy.c:67
#, fuzzy
msgid "Dummy connection"
msgstr "ADSL कनेक्शन"

#: ../src/devices/nm-device-ethernet.c:1413
msgid "PPPoE connection"
msgstr "PPPoE कनेक्शन"

#: ../src/devices/nm-device-ethernet.c:1413
msgid "Wired connection"
msgstr "तारयुक्त संबंधन"

#: ../src/devices/nm-device-ethernet-utils.c:33
#, c-format
msgid "Wired connection %d"
msgstr "तारयुक्त संबंधन %d"

#: ../src/devices/nm-device-ip-tunnel.c:422
#, fuzzy
msgid "IP tunnel connection"
msgstr "PAN कनेक्शन"

#: ../src/devices/nm-device-macvlan.c:365
#, fuzzy
msgid "MACVLAN connection"
msgstr "VLAN कनेक्शन"

#: ../src/devices/nm-device-tun.c:157
#, fuzzy
msgid "TUN connection"
msgstr "DUN कनेक्शन"

#: ../src/devices/nm-device-wpan.c:68
#, fuzzy
msgid "WPAN connection"
msgstr "PAN कनेक्शन"

#: ../src/devices/team/nm-device-team.c:102
msgid "Team connection"
msgstr "टीम कनेक्शन"

#: ../src/devices/wifi/nm-device-olpc-mesh.c:134
msgid "Mesh"
msgstr "मेश"

#: ../src/devices/wifi/nm-device-wifi.c:898
msgid "WPA Ad-Hoc disabled due to kernel bugs"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:42
#, fuzzy, c-format
msgid "%s is incompatible with static WEP keys"
msgstr "'%s=%s' '%s > 0' के साथ असंगत है"

#: ../src/devices/wifi/nm-wifi-utils.c:76
#, fuzzy
msgid "LEAP authentication requires a LEAP username"
msgstr "बेतार संजाल के द्वारा सत्यापन जरूरी"

#: ../src/devices/wifi/nm-wifi-utils.c:86
msgid "LEAP username requires 'leap' authentication"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:99
msgid "LEAP authentication requires IEEE 802.1x key management"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:119
msgid "LEAP authentication is incompatible with Ad-Hoc mode"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:131
msgid "LEAP authentication is incompatible with 802.1x setting"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:153
#, c-format
msgid "a connection using '%s' authentication cannot use WPA key management"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:164
#, c-format
msgid "a connection using '%s' authentication cannot specify WPA protocols"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:180
#: ../src/devices/wifi/nm-wifi-utils.c:197
#, c-format
msgid "a connection using '%s' authentication cannot specify WPA ciphers"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:209
#, c-format
msgid "a connection using '%s' authentication cannot specify a WPA password"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:240
#, fuzzy
msgid "Dynamic WEP requires an 802.1x setting"
msgstr "गतिशील WEP (802.1x)"

#: ../src/devices/wifi/nm-wifi-utils.c:250
#: ../src/devices/wifi/nm-wifi-utils.c:278
msgid "Dynamic WEP requires 'open' authentication"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:265
msgid "Dynamic WEP requires 'ieee8021x' key management"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:312
msgid "WPA-PSK authentication is incompatible with 802.1x"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:322
#, fuzzy
msgid "WPA-PSK requires 'open' authentication"
msgstr "तारयुक्त 802.1X सत्यापन"

#: ../src/devices/wifi/nm-wifi-utils.c:334
msgid "WPA Ad-Hoc authentication requires an Ad-Hoc mode AP"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:347
msgid "WPA Ad-Hoc authentication requires 'wpa' protocol"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:359
#, fuzzy
msgid "WPA Ad-Hoc authentication requires 'none' pairwise cipher"
msgstr "बेतार संजाल के द्वारा सत्यापन जरूरी"

#: ../src/devices/wifi/nm-wifi-utils.c:371
msgid "WPA Ad-Hoc requires 'tkip' group cipher"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:385
msgid "Access point does not support PSK but setting requires it"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:415
msgid "WPA-EAP authentication requires an 802.1x setting"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:425
#, fuzzy
msgid "WPA-EAP requires 'open' authentication"
msgstr "तारयुक्त 802.1X सत्यापन"

#: ../src/devices/wifi/nm-wifi-utils.c:436
msgid "802.1x setting requires 'wpa-eap' key management"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:449
msgid "Access point does not support 802.1x but setting requires it"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:477
msgid ""
"Access point mode is Ad-Hoc but setting requires Infrastructure security"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:487
msgid "Ad-Hoc mode is incompatible with 802.1x security"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:496
msgid "Ad-Hoc mode is incompatible with LEAP security"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:506
msgid "Ad-Hoc mode requires 'open' authentication"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:516
msgid ""
"Access point mode is Infrastructure but setting requires Ad-Hoc security"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:557
#: ../src/devices/wifi/nm-wifi-utils.c:585
#, c-format
msgid "connection does not match access point"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:609
msgid "Access point is unencrypted but setting specifies security"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:698
msgid ""
"WPA authentication is incompatible with non-EAP (original) LEAP or Dynamic "
"WEP"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:708
msgid "WPA authentication is incompatible with Shared Key authentication"
msgstr ""

#: ../src/devices/wifi/nm-wifi-utils.c:761
#, fuzzy
msgid "Failed to determine AP security information"
msgstr "गोपन के लिए सममितीय कुंजी सेट करने में विफल."

#: ../src/nm-config.c:562
#, fuzzy, c-format
msgid "Bad '%s' option: "
msgstr "'%s' खाली है"

#: ../src/nm-config.c:575
msgid "Config file location"
msgstr "Config  फाइल स्थान"

#: ../src/nm-config.c:576
msgid "Config directory location"
msgstr "Config निर्देशिका स्थान"

#: ../src/nm-config.c:577
#, fuzzy
msgid "System config directory location"
msgstr "Config निर्देशिका स्थान"

#: ../src/nm-config.c:578
#, fuzzy
msgid "Internal config file location"
msgstr "Config  फाइल स्थान"

#: ../src/nm-config.c:579
msgid "State file location"
msgstr " फ़ाइल स्थान की स्थिति"

#: ../src/nm-config.c:580
msgid "State file for no-auto-default devices"
msgstr ""

#: ../src/nm-config.c:581
msgid "List of plugins separated by ','"
msgstr "',' के द्वारा अलग प्लगिन की सूची "

#: ../src/nm-config.c:582
#, fuzzy
msgid "Quit after initial configuration"
msgstr "मौजूदा nmcli विन्यास:\n"

#: ../src/nm-config.c:583 ../src/nm-iface-helper.c:295
msgid "Don't become a daemon, and log to stderr"
msgstr "कोई डेमान मत बनाएँ, और stderr में लॉग करें"

#. These three are hidden for now, and should eventually just go away.
#: ../src/nm-config.c:586
msgid "An http(s) address for checking internet connectivity"
msgstr "इंटरनेट कनेक्टिविटी की जाँच के लिए एक HTTP पता (ओं)"

#: ../src/nm-config.c:587
msgid "The interval between connectivity checks (in seconds)"
msgstr "संयोजकता जांचों के बीच अंतराल (सेकंड में)"

#: ../src/nm-config.c:588
msgid "The expected start of the response"
msgstr "प्रतिक्रिया की अपेक्षित शुरुआत"

#: ../src/nm-config.c:595
#, fuzzy
msgid "NetworkManager options"
msgstr "नेटवर्कप्रबंधक अनुमति"

#: ../src/nm-config.c:595
#, fuzzy
msgid "Show NetworkManager options"
msgstr "नेटवर्कप्रबंधक अनुमति"

#. Interface/IP config
#: ../src/nm-iface-helper.c:275
#, fuzzy
msgid "The interface to manage"
msgstr "जनक अंतरफलक [कोई नहीं]:"

#: ../src/nm-iface-helper.c:276
#, fuzzy
msgid "Connection UUID"
msgstr "कनेक्शन"

#: ../src/nm-iface-helper.c:277
#, fuzzy
msgid "Connection Token for Stable IDs"
msgstr "कनेक्शन्स प्रोफ़ाइल विवरण"

#: ../src/nm-iface-helper.c:278
msgid "Whether to manage IPv6 SLAAC"
msgstr ""

#: ../src/nm-iface-helper.c:279
msgid "Whether SLAAC must be successful"
msgstr ""

#: ../src/nm-iface-helper.c:280
msgid "Use an IPv6 temporary privacy address"
msgstr ""

#: ../src/nm-iface-helper.c:281
#, fuzzy
msgid "Current DHCPv4 address"
msgstr "क्लोन MAC पता"

#: ../src/nm-iface-helper.c:282
msgid "Whether DHCPv4 must be successful"
msgstr ""

#: ../src/nm-iface-helper.c:283
#, fuzzy
msgid "Hex-encoded DHCPv4 client ID"
msgstr "असमर्थित DHCP क्लाइंट '%s'"

#: ../src/nm-iface-helper.c:284
msgid "Hostname to send to DHCP server"
msgstr ""

#: ../src/nm-iface-helper.c:284
msgid "barbar"
msgstr ""

#: ../src/nm-iface-helper.c:285
msgid "FQDN to send to DHCP server"
msgstr ""

#: ../src/nm-iface-helper.c:285
msgid "host.domain.org"
msgstr ""

#: ../src/nm-iface-helper.c:286
#, fuzzy
msgid "Route priority for IPv4"
msgstr "हटाने के लिए कोई प्राथमिकता नहीं"

#: ../src/nm-iface-helper.c:286
msgid "0"
msgstr ""

#: ../src/nm-iface-helper.c:287
#, fuzzy
msgid "Route priority for IPv6"
msgstr "हटाने के लिए कोई प्राथमिकता नहीं"

#: ../src/nm-iface-helper.c:287
msgid "1024"
msgstr ""

#: ../src/nm-iface-helper.c:288
msgid "Hex-encoded Interface Identifier"
msgstr ""

#: ../src/nm-iface-helper.c:289
msgid "IPv6 SLAAC address generation mode"
msgstr ""

#: ../src/nm-iface-helper.c:290
msgid ""
"The logging backend configuration value. See logging.backend in "
"NetworkManager.conf"
msgstr ""

#: ../src/nm-iface-helper.c:310
msgid ""
"nm-iface-helper is a small, standalone process that manages a single network "
"interface."
msgstr ""

#: ../src/nm-iface-helper.c:419
#, c-format
msgid "An interface name and UUID are required\n"
msgstr ""

#: ../src/nm-iface-helper.c:426
#, c-format
msgid "Failed to find interface index for %s (%s)\n"
msgstr ""

#: ../src/nm-iface-helper.c:444
#, c-format
msgid "Ignoring unrecognized log domain(s) '%s' passed on command line.\n"
msgstr "अपरिचित लॉग डोमेन '%s' कमांड लाइन पर पास किया गया.\n"

#: ../src/nm-iface-helper.c:481
#, c-format
msgid "(%s): Invalid IID %s\n"
msgstr ""

#: ../src/nm-iface-helper.c:492
#, c-format
msgid "(%s): Invalid DHCP client-id %s\n"
msgstr ""

#: ../src/nm-logging.c:299
#, c-format
msgid "Unknown log level '%s'"
msgstr "अज्ञात लॉग स्तर '%s'"

#: ../src/nm-logging.c:409
#, c-format
msgid "Unknown log domain '%s'"
msgstr "अज्ञात लॉग डोमेन '%s'"

#~ msgid "Error: failed to remove a value from %s.%s: %s."
#~ msgstr "त्रुटि: %s.%s मान हटाने में विफल: %s"

#~ msgid "WEP"
#~ msgstr "WEP"

#~ msgid "WPA1"
#~ msgstr "WPA1"

#~ msgid "WPA2"
#~ msgstr "WPA2"

#~ msgid "802.1X"
#~ msgstr "802.1X"

#~ msgid "default route cannot be added (NetworkManager handles it by itself)"
#~ msgstr "तयशुदा रूट जोड़ा नहीं जा सकता है (NetworkManager इसे स्वयं हैंडल करता है)"

#~ msgid "priority '%s' is not valid (<0-%ld>)"
#~ msgstr "प्राथमिकता '%s' मान्य नहीं है (<0-%ld>)"

#, fuzzy
#~ msgid "'%s' does not contain a valid team configuration"
#~ msgstr "'%s' एक वैध टीम विन्यास नहीं है या फ़ाइल नाम नहीं है."

#~ msgid "no item to remove"
#~ msgstr "हटाने के लिए कोई मद नहीं"

#~ msgid "index '%d' is not in range <0-%d>"
#~ msgstr "सूची '%d' परिसर में नहीं है <0-%d>"

#~ msgid "missing option"
#~ msgstr "अनुपस्थित विकल्प"

#~ msgid "'%s' is not a valid MAC"
#~ msgstr "'%s' एक वैध MAC नहीं है"

#~ msgid "the property doesn't contain EAP method '%s'"
#~ msgstr "विशेषता में EAP विधि '%s' समाहित नहीं है"

#~ msgid "the property doesn't contain alternative subject match '%s'"
#~ msgstr "विशेषता में वैकल्पिक विषय मेल '%s' समाहित नहीं है"

#~ msgid ""
#~ "the property doesn't contain \"phase2\" alternative subject match '%s'"
#~ msgstr "विशेषता में \"phase2\" वैकल्पिक विषय मेल '%s' समाहित नहीं है"

#~ msgid "the property doesn't contain permission '%s'"
#~ msgstr "विशेषता में '%s' अनुमति समाहित नहीं है"

#~ msgid "the property doesn't contain UUID '%s'"
#~ msgstr "विशेषता में UUID '%s'  नहीं है"

#~ msgid "the property doesn't contain DNS server '%s'"
#~ msgstr "विशेषता में DNS सर्वर '%s' समाहित नहीं है"

#~ msgid "the property doesn't contain DNS search domain '%s'"
#~ msgstr "विशेषता में DNS खोज डोमेन '%s' समाहित नहीं है"

#, fuzzy
#~ msgid "the property doesn't contain DNS option '%s'"
#~ msgstr "विशेषता में '%s' मैपिंग नहीं है"

#~ msgid "the property doesn't contain IP address '%s'"
#~ msgstr "विशेषता में IP पता '%s' नहीं है"

#~ msgid "the property doesn't contain route '%s'"
#~ msgstr "विशेषता में  '%s' नहीं है"

#~ msgid "invalid IPv6 address '%s'"
#~ msgstr "अमान्य IPv6 पता '%s'"

#, fuzzy
#~ msgid "the property doesn't contain interface name '%s'"
#~ msgstr "विशेषता में  '%s' नहीं है"

#, fuzzy
#~ msgid "the property doesn't contain vf with index %u"
#~ msgstr "विशेषता में EAP विधि '%s' समाहित नहीं है"

#, fuzzy
#~ msgid "the property doesn't contain qdisc '%s'"
#~ msgstr "विशेषता में UUID '%s'  नहीं है"

#, fuzzy
#~ msgid "the property doesn't contain tfilter '%s'"
#~ msgstr "विशेषता में  '%s' नहीं है"

#, fuzzy
#~ msgid "the property doesn't contain string '%s'"
#~ msgstr "विशेषता में '%s' मैपिंग नहीं है"

#, fuzzy
#~ msgid "the property doesn't contain link watcher '%s'"
#~ msgstr "विशेषता में  '%s' नहीं है"

#, fuzzy
#~ msgid "only one mapping at a time is supported; taking the first one (%s)"
#~ msgstr "चेतावनी: एक समय में एक मैपिंग ही समर्थित है; पहले वाले को ले रहा है (%s)\n"

#~ msgid "the property doesn't contain mapping '%s'"
#~ msgstr "विशेषता में '%s' मैपिंग नहीं है"

#~ msgid "no priority to remove"
#~ msgstr "हटाने के लिए कोई प्राथमिकता नहीं"

#~ msgid "index '%d' is not in the range of <0-%d>"
#~ msgstr "सूची '%d' <0-%d> के परिसर का नहीं है"

#, fuzzy
#~ msgid "'%s' cannot be empty"
#~ msgstr "'%s' खाली है"

#~ msgid "the property doesn't contain MAC address '%s'"
#~ msgstr "विशेषता में मैक पता '%s' नहीं है"

#~ msgid "the property doesn't contain protocol '%s'"
#~ msgstr "विशेषता में प्रोटोकॉल '%s' नहीं है"

#~ msgid "'%s' is not a valid PSK"
#~ msgstr "'%s' वैध PSK नहीं है"

#~ msgid "Disconnected by D-Bus"
#~ msgstr "डिबस से डिसकनेक्टेड"

#~ msgid "Doesn't look like a PEM private key file."
#~ msgstr "एक PEM निजी कुंजी फाइल की तरह का नहीं दिखता है."

#~ msgid "Private key cipher '%s' was unknown."
#~ msgstr "निजी कुंजी साइफर '%s' अज्ञात था."

#, fuzzy
#~ msgid "Failed to initialize the MD5 engine: %s (%s)"
#~ msgstr "MD5 ईंजन आरंभीकृत करने में विफल: %s / %s."

#~ msgid "Invalid IV length (must be at least %zd)."
#~ msgstr "अवैध IV लंबाई (कम से कम %zd होना चाहिए)."

#~ msgid "Failed to initialize the MD5 context: %d."
#~ msgstr "MD5 संदर्भ आरंभीकृत करने में विफल: %d."

#~ msgid "Invalid IV length (must be at least %d)."
#~ msgstr "अवैध IV लंबाई (जरूर कम से कम %d होना चाहिए)."

#~ msgid "Couldn't convert password to UCS2: %d"
#~ msgstr "कूटशब्द को UCS2 में बदल नहीं सका: %d"

#~ msgid "invalid phase2 private key"
#~ msgstr "अवैध phase2 निजी कुंजी"

#~ msgid "requires '%s' or '%s' setting"
#~ msgstr "'%s' या '%s' सेटिंग की जरूरत है"

#~ msgid "'%s' is not a valid interface name for '%s' option"
#~ msgstr "'%s' '%s' विकल्प के लिए वैध अंतरफलक नाम नहीं है"

#~ msgid "'%s' is not a valid interface name"
#~ msgstr "'%s' कोई वैध अंतरफलक नाम नहीं है"

#~ msgid "requires presence of '%s' setting in the connection"
#~ msgstr "कनेक्शन में '%s' सेटिंग की उपस्थिति की जरूरत है"

#~ msgid "%d. IPv4 address is invalid"
#~ msgstr "%d. IPv4 पता अवैध है"

#~ msgid "%d. IPv4 address has invalid prefix"
#~ msgstr "%d. IPv4 पता में अवैध उपसर्ग है"

#~ msgid "%d. route has invalid prefix"
#~ msgstr "%d. रूट में अवैध उपसर्ग है"

#, fuzzy
#~ msgid "%d. IPv6 address is invalid"
#~ msgstr "%d. IPv4 पता अवैध है"

#, fuzzy
#~ msgid "%d. IPv6 address has invalid prefix"
#~ msgstr "%d. IPv4 पता में अवैध उपसर्ग है"

#~ msgid "requires setting '%s' property"
#~ msgstr "सेटिंग '%s' गुण चाहिए"

#, fuzzy
#~ msgid "GSM mobile broadband connection requires a 'gsm' setting"
#~ msgstr "मोबाइल ब्रॉडबैंड कनेक्शन %d"

#~ msgid ""
#~ "Connection successfully activated (master waiting for slaves) (D-Bus "
#~ "active path: %s)\n"
#~ msgstr ""
#~ "कनेक्शन सफलतापूर्वक सक्रिय किया गया (मास्टर स्लेव के लिए प्रतीक्षारत) (डी बस सक्रिय "
#~ "पथ: %s)\n"

#, fuzzy
#~ msgid "Error: bad color: %s\n"
#~ msgstr "त्रुटि: अवैध मान: %s\n"

#, fuzzy
#~ msgid "Error: Failed to setup a Wi-Fi hotspot"
#~ msgstr "त्रुटि: मेजबाननाम सेट करने में विफल: (%d) %s"

#~ msgid "Error: Failed to add/activate new connection: Unknown error"
#~ msgstr "त्रुटि: नया कनेक्शन को जोड़ने के लिए / सक्रिय करने में विफल: अज्ञात त्रुटि"

#~ msgid "Connection with UUID '%s' created and activated on device '%s'\n"
#~ msgstr "UUID '%s'  के साथ कनेक्शन बनाया है और युक्ति '%s' पर सक्रिय हैं \n"

#, fuzzy
#~ msgid "Hotspot '%s' activated on device '%s'\n"
#~ msgstr "UUID '%s'  के साथ कनेक्शन बनाया है और युक्ति '%s' पर सक्रिय हैं \n"

#~ msgid "Device '%s' has been connected.\n"
#~ msgstr "युक्ति '%s' को कनेक्ट किया गया.\n"

#~ msgid "'%s' is ambiguous (%s x %s)"
#~ msgstr "'%s' दुविधापूर्ण है (%s x %s)"

#, fuzzy
#~ msgid "'%s' is not a valid flag number; use <0-%d>"
#~ msgstr "'%s' एक वैध चैनल नहीं है; <1-13> का उपयोग करें"

#~ msgid "%d (disabled)"
#~ msgstr "%d (अक्षम)"

#~ msgid "%d (enabled, prefer public IP)"
#~ msgstr "%d (सक्षम, सार्वजनिक आईपी पसंद करते हैं)"

#~ msgid "%d (enabled, prefer temporary IP)"
#~ msgstr "%d (सक्षम है, अस्थायी आईपी पसंद करते हैं)"

#, fuzzy
#~ msgid "%d (forever)"
#~ msgstr "%d (अज्ञात)"

#, fuzzy
#~ msgid "%d (off)"
#~ msgstr "%d (अज्ञात)"

#~ msgid "Editor failed with status %d"
#~ msgstr "%d स्थिति के साथ संपादक विफल"

#~ msgid "Editor failed with signal %d"
#~ msgstr "%d संकेत के साथ संपादक विफल"

#, fuzzy
#~ msgid "ignoring invalid DNS server IPv6 address '%s'"
#~ msgstr "अमान्य IPv6 पता '%s'"

#, fuzzy
#~ msgid "invalid negative value (%i)"
#~ msgstr "अवैध गेटवे '%s'"

#, fuzzy
#~ msgid "invalid char value (%i)"
#~ msgstr "अवैध '%s' या इसका मान '%s'"

#, fuzzy
#~ msgid "invalid int64 value (%s)"
#~ msgstr "अवैध '%s' या इसका मान '%s'"

#, fuzzy
#~ msgid "unhandled setting property type '%s'"
#~ msgstr "त्रुटि: अवैध <setting>.<property> '%s'."

#, fuzzy
#~ msgid "failed to convert value '%s' to uint"
#~ msgstr "त्रुटि: '%s' मान हटाने में विफल: %s\n"

#~ msgid "Error in configuration file: %s.\n"
#~ msgstr "विन्यास फ़ाइल में त्रुटि: %s.\n"

#~ msgid "Ignoring unrecognized log domain(s) '%s' from config files.\n"
#~ msgstr "अपरिचित लॉग डोमेन '%s' को कॉन्फिग फ़ाइल से अनदेखा किया.\n"