# translation of zh_TW.po to Traditional Chinese
# Traditional Chinese translation of Network Manager.
# Copyright (C) 2005, 2010 Free Software Foundation, Inc.
#
# Woodman Tuen <wmtuen@gmail.com>, 2005.
# Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>, 2008.
# Chester Cheng <ccheng 於 redhat>, 2010.
# Chester Cheng <ccheng@紅帽子>, 2010.
# Terry Chuang <tchuang at redhat>, 2010.
# Terry Chuang <tchuang@redhat.com>, 2010.
# ccheng <ccheng@redhat.com>, 2014. #zanata
# tchuang <tchuang@redhat.com>, 2014. #zanata
msgid ""
msgstr ""
"Project-Id-Version: zh_TW\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2014-01-23 17:13+0530\n"
"PO-Revision-Date: 2014-01-28 02:24-0500\n"
"Last-Translator: tchuang <tchuang@redhat.com>\n"
"Language-Team: Traditional Chinese <zh@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Zanata 3.2.3\n"
"Language: zh-TW\n"

#: ../cli/src/common.c:34 ../cli/src/common.c:46 ../cli/src/common.c:54
#: ../cli/src/common.c:65 ../cli/src/connections.c:174
#: ../cli/src/connections.c:200
msgid "GROUP"
msgstr "GROUP"

#: ../cli/src/common.c:35 ../cli/src/common.c:55
msgid "ADDRESS"
msgstr "ADDRESS"

#: ../cli/src/common.c:36 ../cli/src/common.c:56
msgid "ROUTE"
msgstr "ROUTE"

#: ../cli/src/common.c:37 ../cli/src/common.c:57
msgid "DNS"
msgstr "DNS"

#: ../cli/src/common.c:38 ../cli/src/common.c:58
msgid "DOMAIN"
msgstr "DOMAIN"

#: ../cli/src/common.c:39
msgid "WINS"
msgstr "WINS"

#: ../cli/src/common.c:47 ../cli/src/common.c:66
msgid "OPTION"
msgstr "OPTION"

#: ../cli/src/common.c:404 ../cli/src/settings.c:2808
#, c-format
msgid "invalid IPv4 address '%s'"
msgstr "無效的 IPv4 位址「%s」"

#: ../cli/src/common.c:412
#, c-format
msgid "invalid prefix '%s'; <1-32> allowed"
msgstr "無效的前綴「%s」；允許的值爲 <1-32>"

#: ../cli/src/common.c:419 ../cli/src/common.c:472
#, c-format
msgid "invalid gateway '%s'"
msgstr "無效的閘道器「%s」"

#: ../cli/src/common.c:457 ../cli/src/settings.c:3054
#, c-format
msgid "invalid IPv6 address '%s'"
msgstr "無效的 IPv6 位址「%s」"

#: ../cli/src/common.c:465
#, c-format
msgid "invalid prefix '%s'; <1-128> allowed"
msgstr "無效的前綴「%s」；允許的值爲 <1-128>"

#: ../cli/src/common.c:512
#, c-format
msgid "invalid IPv4 route '%s'"
msgstr "無效的 IPv4 路由「%s」"

#: ../cli/src/common.c:520
#, c-format
msgid "invalid prefix '%s'; <0-32> allowed"
msgstr "無效的前綴「%s」；允許的值爲 <0-32>"

#: ../cli/src/common.c:527 ../cli/src/common.c:590
#, c-format
msgid "invalid next hop address '%s'"
msgstr "無效的下個躍點位址「%s」"

#: ../cli/src/common.c:534 ../cli/src/common.c:598
#, c-format
msgid "invalid metric '%s'"
msgstr "無效的單位「%s」"

#: ../cli/src/common.c:575
#, c-format
msgid "invalid IPv6 route '%s'"
msgstr "無效的 IPv6 路由「%s」"

#: ../cli/src/common.c:583
#, c-format
msgid "invalid prefix '%s'; <0-128> allowed"
msgstr "無效的前綴「%s」；允許的值爲 <0-128>"

#: ../cli/src/common.c:619
msgid "unmanaged"
msgstr "不受管理的"

#: ../cli/src/common.c:621
msgid "unavailable"
msgstr "無法使用"

#: ../cli/src/common.c:623 ../cli/src/network-manager.c:276
msgid "disconnected"
msgstr "離線"

#: ../cli/src/common.c:625
msgid "connecting (prepare)"
msgstr "連線中（準備）"

#: ../cli/src/common.c:627
msgid "connecting (configuring)"
msgstr "連線中（配置中）"

#: ../cli/src/common.c:629
msgid "connecting (need authentication)"
msgstr "連線中（需要身份認證）"

#: ../cli/src/common.c:631
msgid "connecting (getting IP configuration)"
msgstr "連線中（正在取得 IP 配置）"

#: ../cli/src/common.c:633
msgid "connecting (checking IP connectivity)"
msgstr "正在連線（正在檢查 IP 連線）"

#: ../cli/src/common.c:635
msgid "connecting (starting secondary connections)"
msgstr "正在連線（正在啟用次要連線）"

#: ../cli/src/common.c:637 ../cli/src/network-manager.c:272
msgid "connected"
msgstr "已連線"

#: ../cli/src/common.c:639 ../cli/src/connections.c:732
msgid "deactivating"
msgstr "正在停用"

#: ../cli/src/common.c:641
msgid "connection failed"
msgstr "連線失敗"

#: ../cli/src/common.c:643 ../cli/src/connections.c:737
#: ../cli/src/connections.c:760 ../cli/src/connections.c:1462
#: ../cli/src/devices.c:827 ../cli/src/devices.c:2257
#: ../cli/src/network-manager.c:279 ../cli/src/network-manager.c:297
#: ../cli/src/network-manager.c:360 ../cli/src/network-manager.c:363
#: ../cli/src/network-manager.c:373 ../cli/src/network-manager.c:375
#: ../cli/src/network-manager.c:432 ../cli/src/network-manager.c:448
#: ../cli/src/settings.c:732 ../cli/src/settings.c:760
#: ../cli/src/settings.c:822 ../cli/src/settings.c:1137
#: ../cli/src/utils.c:1080 ../src/main.c:470 ../src/main.c:498
msgid "unknown"
msgstr "不明"

#: ../cli/src/common.c:652
msgid "No reason given"
msgstr "未提供理由"

#: ../cli/src/common.c:655 ../cli/src/connections.c:2258
#, c-format
msgid "Unknown error"
msgstr "不明的錯誤"

#: ../cli/src/common.c:658
msgid "Device is now managed"
msgstr "裝置現在已受管理"

#: ../cli/src/common.c:661
msgid "Device is now unmanaged"
msgstr "裝置現在已不受管理"

#: ../cli/src/common.c:664
msgid "The device could not be readied for configuration"
msgstr "裝置尚未準備好進行配置"

#: ../cli/src/common.c:667
msgid ""
"IP configuration could not be reserved (no available address, timeout, etc.)"
msgstr "IP 配置無法預留（沒有可用的位址、逾時等等。）"

#: ../cli/src/common.c:670
msgid "The IP configuration is no longer valid"
msgstr "IP 配置已不再有效"

#: ../cli/src/common.c:673
msgid "Secrets were required, but not provided"
msgstr "需要機密，但尚未提供"

#: ../cli/src/common.c:676
msgid "802.1X supplicant disconnected"
msgstr "802.1X 請求已斷線"

#: ../cli/src/common.c:679
msgid "802.1X supplicant configuration failed"
msgstr "802.1X 請求組態失敗"

#: ../cli/src/common.c:682
msgid "802.1X supplicant failed"
msgstr "802.1X 請求已失敗"

#: ../cli/src/common.c:685
msgid "802.1X supplicant took too long to authenticate"
msgstr "802.1X 請求花了太長時間進行認證"

#: ../cli/src/common.c:688
msgid "PPP service failed to start"
msgstr "無法啟動 PPP 服務"

#: ../cli/src/common.c:691
msgid "PPP service disconnected"
msgstr "PPP 服務已斷線"

#: ../cli/src/common.c:694
msgid "PPP failed"
msgstr "PPP 失敗"

#: ../cli/src/common.c:697
msgid "DHCP client failed to start"
msgstr "DHCP 客戶端啟動失敗"

#: ../cli/src/common.c:700
msgid "DHCP client error"
msgstr "DHCP 客戶端錯誤"

#: ../cli/src/common.c:703
msgid "DHCP client failed"
msgstr "DHCP 客戶端失敗"

#: ../cli/src/common.c:706
msgid "Shared connection service failed to start"
msgstr "共享的連線服務啟動失敗"

#: ../cli/src/common.c:709
msgid "Shared connection service failed"
msgstr "共享連線服務失敗"

#: ../cli/src/common.c:712
msgid "AutoIP service failed to start"
msgstr "AutoIP 服務啟用失敗"

#: ../cli/src/common.c:715
msgid "AutoIP service error"
msgstr "AutoIP 服務錯誤"

#: ../cli/src/common.c:718
msgid "AutoIP service failed"
msgstr "AutoIP 服務失敗"

#: ../cli/src/common.c:721
msgid "The line is busy"
msgstr "忙線中"

#: ../cli/src/common.c:724
msgid "No dial tone"
msgstr "沒有撥號音"

#: ../cli/src/common.c:727
msgid "No carrier could be established"
msgstr "無法建立載體"

#: ../cli/src/common.c:730
msgid "The dialing request timed out"
msgstr "撥號要求逾時"

#: ../cli/src/common.c:733
msgid "The dialing attempt failed"
msgstr "嘗試撥號失敗"

#: ../cli/src/common.c:736
msgid "Modem initialization failed"
msgstr "數據機初始化失敗"

#: ../cli/src/common.c:739
msgid "Failed to select the specified APN"
msgstr "無法選擇指定的 APN"

#: ../cli/src/common.c:742
msgid "Not searching for networks"
msgstr "不要搜尋網路"

#: ../cli/src/common.c:745
msgid "Network registration denied"
msgstr "網路登記被拒絕"

#: ../cli/src/common.c:748
msgid "Network registration timed out"
msgstr "網路登記逾時"

#: ../cli/src/common.c:751
msgid "Failed to register with the requested network"
msgstr "無法向要求的網路登記"

#: ../cli/src/common.c:754
msgid "PIN check failed"
msgstr "PIN 檢查失敗"

#: ../cli/src/common.c:757
msgid "Necessary firmware for the device may be missing"
msgstr "可能缺少裝置的必要韌體"

#: ../cli/src/common.c:760
msgid "The device was removed"
msgstr "裝置已移除"

#: ../cli/src/common.c:763
msgid "NetworkManager went to sleep"
msgstr "NetworkManager 進入了睡眠狀態"

#: ../cli/src/common.c:766
msgid "The device's active connection disappeared"
msgstr "裝置的連線消失"

#: ../cli/src/common.c:769
msgid "Device disconnected by user or client"
msgstr "裝置的連線已被使用者或客戶端切斷"

#: ../cli/src/common.c:772
msgid "Carrier/link changed"
msgstr "載體/連結已更改"

#: ../cli/src/common.c:775
msgid "The device's existing connection was assumed"
msgstr "已假設了裝置的既有連線"

#: ../cli/src/common.c:778
msgid "The supplicant is now available"
msgstr "要求現在已能進行"

#: ../cli/src/common.c:781
msgid "The modem could not be found"
msgstr "找不到數據機"

#: ../cli/src/common.c:784
msgid "The Bluetooth connection failed or timed out"
msgstr "藍牙連線失敗或逾時"

#: ../cli/src/common.c:787
msgid "GSM Modem's SIM card not inserted"
msgstr "GSM 數據機的 SIM 卡尚未插入"

#: ../cli/src/common.c:790
msgid "GSM Modem's SIM PIN required"
msgstr "需要 GSM 數據機的 SIM PIN"

#: ../cli/src/common.c:793
msgid "GSM Modem's SIM PUK required"
msgstr "需要 GSM 數據機的 SIM PUK"

#: ../cli/src/common.c:796
msgid "GSM Modem's SIM wrong"
msgstr "GSM 數據機的 SIM 錯誤"

#: ../cli/src/common.c:799
msgid "InfiniBand device does not support connected mode"
msgstr "InfiniBand 裝置不支援已連接模式"

#: ../cli/src/common.c:802
msgid "A dependency of the connection failed"
msgstr "連線的相依性發生錯誤"

#: ../cli/src/common.c:805
msgid "A problem with the RFC 2684 Ethernet over ADSL bridge"
msgstr "ADSL 橋接上發生了 RFC 2684 乙太網路上的問題"

#: ../cli/src/common.c:808
msgid "ModemManager is unavailable"
msgstr "ModemManager 無法使用"

#: ../cli/src/common.c:811
msgid "The Wi-Fi network could not be found"
msgstr "找不到 Wi-Fi 網路"

#: ../cli/src/common.c:814
msgid "A secondary connection of the base connection failed"
msgstr "基礎連線的次要連線失敗"

#: ../cli/src/common.c:817
msgid "DCB or FCoE setup failed"
msgstr "設定 DCB 或 FCoE 失敗"

#: ../cli/src/common.c:820
msgid "teamd control failed"
msgstr "teamd 控制失敗"

#: ../cli/src/common.c:824 ../cli/src/devices.c:634 ../tui/nm-ui-utils.c:359
msgid "Unknown"
msgstr "不明"

#: ../cli/src/common.c:866
#, c-format
msgid "invalid priority map '%s'"
msgstr "無效的優先順序對映「%s」"

#: ../cli/src/common.c:873 ../cli/src/common.c:879
#, c-format
msgid "priority '%s' is not valid (<0-%ld>)"
msgstr "優先順序「%s」無效（<0-%ld>）"

#: ../cli/src/common.c:935
#, c-format
msgid "'%s' is not a valid team configuration or file name."
msgstr "'%s' 不是合於規定的 team 配置或檔名"

#: ../cli/src/connections.c:62
msgid "Setting name? "
msgstr "設定名稱？"

#: ../cli/src/connections.c:63
msgid "Property name? "
msgstr "屬性名稱？"

#: ../cli/src/connections.c:64
msgid "Enter connection type: "
msgstr "輸入連線類型："

#: ../cli/src/connections.c:68 ../cli/src/connections.c:175
#: ../cli/src/devices.c:86 ../cli/src/devices.c:114 ../cli/src/devices.c:124
#: ../cli/src/devices.c:134 ../cli/src/devices.c:143 ../cli/src/devices.c:158
#: ../cli/src/devices.c:171 ../cli/src/devices.c:197 ../cli/src/devices.c:212
#: ../cli/src/devices.c:221
msgid "NAME"
msgstr "NAME"

#: ../cli/src/connections.c:69 ../cli/src/connections.c:176
msgid "UUID"
msgstr "UUID"

#: ../cli/src/connections.c:70 ../cli/src/connections.c:201
#: ../cli/src/devices.c:72 ../cli/src/devices.c:88 ../cli/src/devices.c:200
msgid "TYPE"
msgstr "TYPE"

#: ../cli/src/connections.c:71
msgid "TIMESTAMP"
msgstr "TIMESTAMP"

#: ../cli/src/connections.c:72
msgid "TIMESTAMP-REAL"
msgstr "TIMESTAMP-REAL"

#: ../cli/src/connections.c:73 ../cli/src/devices.c:101
msgid "AUTOCONNECT"
msgstr "AUTOCONNECT"

#: ../cli/src/connections.c:74
msgid "READONLY"
msgstr "READONLY"

#: ../cli/src/connections.c:75 ../cli/src/connections.c:183
#: ../cli/src/devices.c:74 ../cli/src/devices.c:187 ../cli/src/devices.c:203
msgid "DBUS-PATH"
msgstr "DBUS-PATH"

#: ../cli/src/connections.c:177
msgid "DEVICES"
msgstr "DEVICES"

#: ../cli/src/connections.c:178 ../cli/src/devices.c:73
#: ../cli/src/devices.c:96 ../cli/src/network-manager.c:39
msgid "STATE"
msgstr "STATE"

#: ../cli/src/connections.c:179
msgid "DEFAULT"
msgstr "DEFAULT"

#: ../cli/src/connections.c:180
msgid "DEFAULT6"
msgstr "DEFAULT6"

#: ../cli/src/connections.c:181
msgid "SPEC-OBJECT"
msgstr "SPEC-OBJECT"

#: ../cli/src/connections.c:182 ../cli/src/connections.c:224
#: ../tui/nm-editor-utils.c:243 ../tui/nmt-connect-connection-list.c:343
msgid "VPN"
msgstr "VPN"

#: ../cli/src/connections.c:184 ../cli/src/devices.c:77
#: ../cli/src/devices.c:105
msgid "CON-PATH"
msgstr "CON-PATH"

#: ../cli/src/connections.c:185
msgid "ZONE"
msgstr "ZONE"

#: ../cli/src/connections.c:186
msgid "MASTER-PATH"
msgstr "MASTER-PATH"

#: ../cli/src/connections.c:202
msgid "USERNAME"
msgstr "USERNAME"

#: ../cli/src/connections.c:203
msgid "GATEWAY"
msgstr "GATEWAY"

#: ../cli/src/connections.c:204
msgid "BANNER"
msgstr "BANNER"

#: ../cli/src/connections.c:205
msgid "VPN-STATE"
msgstr "VPN-STATE"

#: ../cli/src/connections.c:206
msgid "CFG"
msgstr "CFG"

#: ../cli/src/connections.c:219 ../cli/src/devices.c:236
msgid "GENERAL"
msgstr "GENERAL"

#: ../cli/src/connections.c:220 ../cli/src/devices.c:243
msgid "IP4"
msgstr "IP4"

#: ../cli/src/connections.c:221 ../cli/src/devices.c:244
msgid "DHCP4"
msgstr "DHCP4"

#: ../cli/src/connections.c:222 ../cli/src/devices.c:245
msgid "IP6"
msgstr "IP6"

#: ../cli/src/connections.c:223 ../cli/src/devices.c:246
msgid "DHCP6"
msgstr "DHCP6"

#: ../cli/src/connections.c:255
#, c-format
msgid ""
"Usage: nmcli connection { COMMAND | help }\n"
"\n"
"COMMAND := { show | up | down | add | modify | edit | delete | reload | load "
"}\n"
"\n"
"  show configured [[id | uuid | path] <ID>]\n"
"  show active     [[id | uuid | path | apath] <ID>]\n"
"\n"
"  up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>] [nsp <name>]\n"
"\n"
"  up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>]\n"
"\n"
"  down [id | uuid | path | apath] <ID>\n"
"\n"
"  add COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS IP_OPTIONS\n"
"\n"
"  modify [id | uuid | path] <ID> <setting>.<property> <value>\n"
"\n"
"  edit [id | uuid | path] <ID>\n"
"  edit [type <new_con_type>] [con-name <new_con_name>]\n"
"\n"
"  delete [id | uuid | path] <ID>\n"
"\n"
"  reload\n"
"\n"
"  load <filename> [ <filename>... ]\n"
"\n"
msgstr ""
"Usage: nmcli connection { COMMAND | help }\n"
"\n"
"COMMAND := { show | up | down | add | modify | edit | delete | reload | load "
"}\n"
"\n"
"  show configured [[id | uuid | path] <ID>]\n"
"  show active     [[id | uuid | path | apath] <ID>]\n"
"\n"
"  up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>] [nsp <name>]\n"
"\n"
"  up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>]\n"
"\n"
"  down [id | uuid | path | apath] <ID>\n"
"\n"
"  add COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS IP_OPTIONS\n"
"\n"
"  modify [id | uuid | path] <ID> <setting>.<property> <value>\n"
"\n"
"  edit [id | uuid | path] <ID>\n"
"  edit [type <new_con_type>] [con-name <new_con_name>]\n"
"\n"
"  delete [id | uuid | path] <ID>\n"
"\n"
"  reload\n"
"\n"
"  load <filename> [ <filename>... ]\n"
"\n"

#: ../cli/src/connections.c:278
#, c-format
msgid ""
"Usage: nmcli connection show { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := active [[id | uuid | path | apath] <ID>]\n"
"\n"
"Show connections which are currently used by a device to connect to a "
"network.\n"
"Without a parameter, all active connections are listed. When <ID> is "
"provided,\n"
"the connection details are displayed instead.\n"
"\n"
"ARGUMENTS := configured [[id | uuid | path] <ID>]\n"
"\n"
"Show in-memory and on-disk connections, some of which may also be active if\n"
"a device is using that connection profile. Without a parameter, all profiles\n"
"are listed. When <ID> is provided, the profile details are displayed instead."
"\n"
"\n"
msgstr ""
"Usage: nmcli connection show { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := active [[id | uuid | path | apath] <ID>]\n"
"\n"
"Show connections which are currently used by a device to connect to a "
"network.\n"
"Without a parameter, all active connections are listed. When <ID> is "
"provided,\n"
"the connection details are displayed instead.\n"
"\n"
"ARGUMENTS := configured [[id | uuid | path] <ID>]\n"
"\n"
"Show in-memory and on-disk connections, some of which may also be active if\n"
"a device is using that connection profile. Without a parameter, all profiles\n"
"are listed. When <ID> is provided, the profile details are displayed instead."
"\n"
"\n"

#: ../cli/src/connections.c:297
#, c-format
msgid ""
"Usage: nmcli connection up { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> [ifname <ifname>] [ap <BSSID>] [nsp "
"<name>]\n"
"\n"
"Activate a connection on a device. The profile to activate is identified by "
"its\n"
"name, UUID or D-Bus path.\n"
"\n"
"ARGUMENTS := ifname <ifname> [ap <BSSID>] [nsp <name>]\n"
"\n"
"Activate a device with a connection. The connection profile is selected\n"
"automatically by NetworkManager.\n"
"\n"
"ifname - specifies the device to active the connection on\n"
"ap     - specifies AP to connect to (only valid for Wi-Fi)\n"
"nsp    - specifies NSP to connect to (only valid for WiMAX)\n"
"\n"
msgstr ""
"Usage: nmcli connection up { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> [ifname <ifname>] [ap <BSSID>] [nsp "
"<name>]\n"
"\n"
"Activate a connection on a device. The profile to activate is identified by "
"its\n"
"name, UUID or D-Bus path.\n"
"\n"
"ARGUMENTS := ifname <ifname> [ap <BSSID>] [nsp <name>]\n"
"\n"
"Activate a device with a connection. The connection profile is selected\n"
"automatically by NetworkManager.\n"
"\n"
"ifname - specifies the device to active the connection on\n"
"ap     - specifies AP to connect to (only valid for Wi-Fi)\n"
"nsp    - specifies NSP to connect to (only valid for WiMAX)\n"
"\n"

#: ../cli/src/connections.c:318
#, c-format
msgid ""
"Usage: nmcli connection down { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path | apath] <ID>\n"
"\n"
"Deactivate a connection from a device (without preventing the device from\n"
"further auto-activation). The profile to deactivate is identified by its "
"name,\n"
"UUID or D-Bus path.\n"
"\n"
msgstr ""
"Usage: nmcli connection down { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path | apath] <ID>\n"
"\n"
"Deactivate a connection from a device (without preventing the device from\n"
"further auto-activation). The profile to deactivate is identified by its "
"name,\n"
"UUID or D-Bus path.\n"
"\n"

#: ../cli/src/connections.c:331
#, c-format
msgid ""
"Usage: nmcli connection add { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS IP_OPTIONS\n"
"\n"
"  COMMON_OPTIONS:\n"
"                  type <type>\n"
"                  ifname <interface name> | \"*\"\n"
"                  [con-name <connection name>]\n"
"                  [autoconnect yes|no]\n"
"\n"
"  TYPE_SPECIFIC_OPTIONS:\n"
"    ethernet:     [mac <MAC address>]\n"
"                  [cloned-mac <cloned MAC address>]\n"
"                  [mtu <MTU>]\n"
"\n"
"    wifi:         ssid <SSID>\n"
"                  [mac <MAC address>]\n"
"                  [cloned-mac <cloned MAC address>]\n"
"                  [mtu <MTU>]\n"
"\n"
"    wimax:        [mac <MAC address>]\n"
"                  [nsp <NSP>]\n"
"\n"
"    pppoe:        username <PPPoE username>\n"
"                  [password <PPPoE password>]\n"
"                  [service <PPPoE service name>]\n"
"                  [mtu <MTU>]\n"
"                  [mac <MAC address>]\n"
"\n"
"    gsm:          apn <APN>\n"
"                  [user <username>]\n"
"                  [password <password>]\n"
"\n"
"    cdma:         [user <username>]\n"
"                  [password <password>]\n"
"\n"
"    infiniband:   [mac <MAC address>]\n"
"                  [mtu <MTU>]\n"
"                  [transport-mode datagram | connected]\n"
"                  [parent <ifname>]\n"
"                  [p-key <IPoIB P_Key>]\n"
"\n"
"    bluetooth:    [addr <bluetooth address>]\n"
"                  [bt-type panu|dun-gsm|dun-cdma]\n"
"\n"
"    vlan:         dev <parent device (connection  UUID, ifname, or MAC)>\n"
"                  id <VLAN ID>\n"
"                  [flags <VLAN flags>]\n"
"                  [ingress <ingress priority mapping>]\n"
"                  [egress <egress priority mapping>]\n"
"                  [mtu <MTU>]\n"
"\n"
"    bond:         [mode balance-rr (0) | active-backup (1) | balance-xor (2) "
"| broadcast (3) |\n"
"                        802.3ad    (4) | balance-tlb   (5) | balance-alb "
"(6)]\n"
"                  [primary <ifname>]\n"
"                  [miimon <num>]\n"
"                  [downdelay <num>]\n"
"                  [updelay <num>]\n"
"                  [arp-interval <num>]\n"
"                  [arp-ip-target <num>]\n"
"\n"
"    bond-slave:   master <master (ifname or connection UUID)>\n"
"\n"
"    team:         [config <file>|<raw JSON data>]\n"
"\n"
"    team-slave:   master <master (ifname or connection UUID)>\n"
"                  [config <file>|<raw JSON data>]\n"
"\n"
"    bridge:       [stp yes|no]\n"
"                  [priority <num>]\n"
"                  [forward-delay <2-30>]\n"
"                  [hello-time <1-10>]\n"
"                  [max-age <6-40>]\n"
"                  [ageing-time <0-1000000>]\n"
"\n"
"    bridge-slave: master <master (ifname or connection UUID)>\n"
"                  [priority <0-63>]\n"
"                  [path-cost <1-65535>]\n"
"                  [hairpin yes|no]\n"
"\n"
"    vpn:          vpn-type vpnc|openvpn|pptp|openconnect|openswan\n"
"                  [user <username>]\n"
"\n"
"    olpc-mesh:    ssid <SSID>\n"
"                  [channel <1-13>]\n"
"                  [dhcp-anycast <MAC address>]\n"
"\n"
"  IP_OPTIONS:\n"
"                  [ip4 <IPv4 address>] [gw4 <IPv4 gateway>]\n"
"                  [ip6 <IPv6 address>] [gw6 <IPv6 gateway>]\n"
"\n"
msgstr ""
"Usage: nmcli connection add { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS IP_OPTIONS\n"
"\n"
"  COMMON_OPTIONS:\n"
"                  type <type>\n"
"                  ifname <interface name> | \"*\"\n"
"                  [con-name <connection name>]\n"
"                  [autoconnect yes|no]\n"
"\n"
"  TYPE_SPECIFIC_OPTIONS:\n"
"    ethernet:     [mac <MAC address>]\n"
"                  [cloned-mac <cloned MAC address>]\n"
"                  [mtu <MTU>]\n"
"\n"
"    wifi:         ssid <SSID>\n"
"                  [mac <MAC address>]\n"
"                  [cloned-mac <cloned MAC address>]\n"
"                  [mtu <MTU>]\n"
"\n"
"    wimax:        [mac <MAC address>]\n"
"                  [nsp <NSP>]\n"
"\n"
"    pppoe:        username <PPPoE username>\n"
"                  [password <PPPoE password>]\n"
"                  [service <PPPoE service name>]\n"
"                  [mtu <MTU>]\n"
"                  [mac <MAC address>]\n"
"\n"
"    gsm:          apn <APN>\n"
"                  [user <username>]\n"
"                  [password <password>]\n"
"\n"
"    cdma:         [user <username>]\n"
"                  [password <password>]\n"
"\n"
"    infiniband:   [mac <MAC address>]\n"
"                  [mtu <MTU>]\n"
"                  [transport-mode datagram | connected]\n"
"                  [parent <ifname>]\n"
"                  [p-key <IPoIB P_Key>]\n"
"\n"
"    bluetooth:    [addr <bluetooth address>]\n"
"                  [bt-type panu|dun-gsm|dun-cdma]\n"
"\n"
"    vlan:         dev <parent device (connection  UUID, ifname, or MAC)>\n"
"                  id <VLAN ID>\n"
"                  [flags <VLAN flags>]\n"
"                  [ingress <ingress priority mapping>]\n"
"                  [egress <egress priority mapping>]\n"
"                  [mtu <MTU>]\n"
"\n"
"    bond:         [mode balance-rr (0) | active-backup (1) | balance-xor (2) "
"| broadcast (3) |\n"
"                        802.3ad    (4) | balance-tlb   (5) | balance-alb "
"(6)]\n"
"                  [primary <ifname>]\n"
"                  [miimon <num>]\n"
"                  [downdelay <num>]\n"
"                  [updelay <num>]\n"
"                  [arp-interval <num>]\n"
"                  [arp-ip-target <num>]\n"
"\n"
"    bond-slave:   master <master (ifname or connection UUID)>\n"
"\n"
"    team:         [config <file>|<raw JSON data>]\n"
"\n"
"    team-slave:   master <master (ifname or connection UUID)>\n"
"                  [config <file>|<raw JSON data>]\n"
"\n"
"    bridge:       [stp yes|no]\n"
"                  [priority <num>]\n"
"                  [forward-delay <2-30>]\n"
"                  [hello-time <1-10>]\n"
"                  [max-age <6-40>]\n"
"                  [ageing-time <0-1000000>]\n"
"\n"
"    bridge-slave: master <master (ifname or connection UUID)>\n"
"                  [priority <0-63>]\n"
"                  [path-cost <1-65535>]\n"
"                  [hairpin yes|no]\n"
"\n"
"    vpn:          vpn-type vpnc|openvpn|pptp|openconnect|openswan\n"
"                  [user <username>]\n"
"\n"
"    olpc-mesh:    ssid <SSID>\n"
"                  [channel <1-13>]\n"
"                  [dhcp-anycast <MAC address>]\n"
"\n"
"  IP_OPTIONS:\n"
"                  [ip4 <IPv4 address>] [gw4 <IPv4 gateway>]\n"
"                  [ip6 <IPv6 address>] [gw6 <IPv6 gateway>]\n"
"\n"

#: ../cli/src/connections.c:408
#, c-format
msgid ""
"Usage: nmcli connection modify { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> <setting name>.<property name> "
"[<value>]\n"
"\n"
"Modify a single property in the connection profile.\n"
"The profile is identified by its name, UUID or D-Bus path.\n"
"\n"
msgstr ""
"Usage: nmcli connection modify { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID> <setting name>.<property name> "
"[<value>]\n"
"\n"
"Modify a single property in the connection profile.\n"
"The profile is identified by its name, UUID or D-Bus path.\n"
"\n"

#: ../cli/src/connections.c:420
#, c-format
msgid ""
"Usage: nmcli connection edit { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID>\n"
"\n"
"Edit an existing connection profile in an interactive editor.\n"
"The profile is identified by its name, UUID or D-Bus path\n"
"\n"
"ARGUMENTS := [type <new connection type>] [con-name <new connection name>]\n"
"\n"
"Add a new connection profile in an interactive editor.\n"
"\n"
msgstr ""
"Usage: nmcli connection edit { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID>\n"
"\n"
"Edit an existing connection profile in an interactive editor.\n"
"The profile is identified by its name, UUID or D-Bus path\n"
"\n"
"ARGUMENTS := [type <new connection type>] [con-name <new connection name>]\n"
"\n"
"Add a new connection profile in an interactive editor.\n"
"\n"

#: ../cli/src/connections.c:436
#, c-format
msgid ""
"Usage: nmcli connection delete { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID>\n"
"\n"
"Delete a connection profile.\n"
"The profile is identified by its name, UUID or D-Bus path.\n"
"\n"
msgstr ""
"Usage: nmcli connection delete { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [id | uuid | path] <ID>\n"
"\n"
"Delete a connection profile.\n"
"The profile is identified by its name, UUID or D-Bus path.\n"
"\n"

#: ../cli/src/connections.c:448
#, c-format
msgid ""
"Usage: nmcli connection reload { help }\n"
"\n"
"Reload all connection files from disk.\n"
"\n"
msgstr ""
"Usage: nmcli connection reload { help }\n"
"\n"
"Reload all connection files from disk.\n"
"\n"

#: ../cli/src/connections.c:457
#, c-format
msgid ""
"Usage: nmcli connection load { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <filename> [<filename>...]\n"
"\n"
"Load/reload one or more connection files from disk. Use this after manually\n"
"editing a connection file to ensure that NetworkManager is aware of its "
"latest\n"
"state.\n"
"\n"
msgstr ""
"Usage: nmcli connection load { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <filename> [<filename>...]\n"
"\n"
"Load/reload one or more connection files from disk. Use this after manually\n"
"editing a connection file to ensure that NetworkManager is aware of its "
"latest\n"
"state.\n"
"\n"

#: ../cli/src/connections.c:515
#, c-format
msgid "Error: 'list configured': %s"
msgstr "錯誤：'list configured'：%s"

#: ../cli/src/connections.c:523
msgid "Connection details"
msgstr "連線詳情"

#: ../cli/src/connections.c:589
msgid "never"
msgstr "永不"

#: ../cli/src/connections.c:590 ../cli/src/connections.c:591
#: ../cli/src/connections.c:833 ../cli/src/connections.c:834
#: ../cli/src/connections.c:836 ../cli/src/connections.c:6112
#: ../cli/src/devices.c:604 ../cli/src/devices.c:654 ../cli/src/devices.c:796
#: ../cli/src/devices.c:797 ../cli/src/devices.c:798 ../cli/src/devices.c:831
#: ../cli/src/devices.c:860 ../cli/src/devices.c:861 ../cli/src/devices.c:862
#: ../cli/src/devices.c:863 ../cli/src/devices.c:864 ../cli/src/devices.c:865
#: ../cli/src/devices.c:866 ../cli/src/network-manager.c:442
msgid "yes"
msgstr "是"

#: ../cli/src/connections.c:590 ../cli/src/connections.c:591
#: ../cli/src/connections.c:833 ../cli/src/connections.c:834
#: ../cli/src/connections.c:836 ../cli/src/connections.c:6112
#: ../cli/src/devices.c:604 ../cli/src/devices.c:654 ../cli/src/devices.c:796
#: ../cli/src/devices.c:797 ../cli/src/devices.c:798 ../cli/src/devices.c:831
#: ../cli/src/devices.c:860 ../cli/src/devices.c:861 ../cli/src/devices.c:862
#: ../cli/src/devices.c:863 ../cli/src/devices.c:864 ../cli/src/devices.c:865
#: ../cli/src/devices.c:866 ../cli/src/network-manager.c:444
msgid "no"
msgstr "否"

#: ../cli/src/connections.c:667
msgid "List of configured connections"
msgstr "已配置的連線清單"

#: ../cli/src/connections.c:684 ../cli/src/connections.c:1225
#: ../cli/src/connections.c:1785 ../cli/src/connections.c:1801
#: ../cli/src/connections.c:1810 ../cli/src/connections.c:1820
#: ../cli/src/connections.c:1916 ../cli/src/connections.c:7563
#: ../cli/src/connections.c:7738 ../cli/src/devices.c:1633
#: ../cli/src/devices.c:1641 ../cli/src/devices.c:2028
#: ../cli/src/devices.c:2035 ../cli/src/devices.c:2049
#: ../cli/src/devices.c:2056 ../cli/src/devices.c:2073
#: ../cli/src/devices.c:2081 ../cli/src/devices.c:2277
#: ../cli/src/devices.c:2373 ../cli/src/devices.c:2380
#, c-format
msgid "Error: %s argument is missing."
msgstr "錯誤：沒有 %s 參數。"

#: ../cli/src/connections.c:698
#, c-format
msgid "Error: %s - no such connection."
msgstr "錯誤：%s - 此連線不存在。"

#: ../cli/src/connections.c:710
#, c-format
msgid "Error: 'show configured': %s"
msgstr "錯誤：「show configured」：%s"

#: ../cli/src/connections.c:715 ../cli/src/connections.c:1853
#: ../cli/src/connections.c:7804 ../cli/src/connections.c:7845
#: ../cli/src/connections.c:7997 ../cli/src/devices.c:2256
#: ../cli/src/devices.c:2630 ../cli/src/network-manager.c:539
#: ../cli/src/network-manager.c:582 ../cli/src/network-manager.c:599
#: ../cli/src/network-manager.c:645 ../cli/src/network-manager.c:659
#: ../cli/src/network-manager.c:776 ../cli/src/network-manager.c:820
#: ../cli/src/network-manager.c:840
#, c-format
msgid "Error: %s."
msgstr "錯誤：%s。"

#: ../cli/src/connections.c:728
msgid "activating"
msgstr "啟用中"

#: ../cli/src/connections.c:730
msgid "activated"
msgstr "已啟用"

# auto translated by TM merge from project: firewalld, version: 0.3.4, DocId: firewalld
#: ../cli/src/connections.c:734
msgid "deactivated"
msgstr "已停止"

#: ../cli/src/connections.c:746
msgid "VPN connecting (prepare)"
msgstr "VPN 連線（準備）"

#: ../cli/src/connections.c:748
msgid "VPN connecting (need authentication)"
msgstr "VPN 連線（需要身份認證）"

#: ../cli/src/connections.c:750
msgid "VPN connecting"
msgstr "VPN 連線"

#: ../cli/src/connections.c:752
msgid "VPN connecting (getting IP configuration)"
msgstr "VPN 連線（取得 IP 配置）"

#: ../cli/src/connections.c:754
msgid "VPN connected"
msgstr "VPN 已連線"

#: ../cli/src/connections.c:756
msgid "VPN connection failed"
msgstr "VPN 連線失敗"

#: ../cli/src/connections.c:758
msgid "VPN disconnected"
msgstr "VPN 已離線"

# auto translated by TM merge from project: gnome-system-monitor, version: 3.8.2.1, DocId: gnome-system-monitor
#: ../cli/src/connections.c:829 ../cli/src/connections.c:839
#: ../cli/src/devices.c:594
msgid "N/A"
msgstr "N/A"

#: ../cli/src/connections.c:1012
#, c-format
msgid "Error: 'list active': %s"
msgstr "錯誤：「list active」：%s"

#: ../cli/src/connections.c:1020
msgid "Active connection details"
msgstr "有效連線的詳細資訊"

#: ../cli/src/connections.c:1177 ../cli/src/connections.c:1840
#: ../cli/src/connections.c:1899 ../cli/src/connections.c:7592
#: ../cli/src/connections.c:7707 ../cli/src/connections.c:7798
#: ../cli/src/connections.c:7826 ../cli/src/devices.c:1197
#: ../cli/src/devices.c:1245 ../cli/src/devices.c:1403
#: ../cli/src/devices.c:1538 ../cli/src/devices.c:1675
#: ../cli/src/devices.c:2115 ../cli/src/devices.c:2414
#: ../cli/src/network-manager.c:484
#, c-format
msgid "Error: NetworkManager is not running."
msgstr "錯誤：NetworkManager 未執行。"

#: ../cli/src/connections.c:1203
msgid "List of active connections"
msgstr "啟用中的連線之清單"

#: ../cli/src/connections.c:1239 ../cli/src/connections.c:1926
#, c-format
msgid "Error: '%s' is not an active connection."
msgstr "錯誤：「%s」並非啟用中的連線。"

#: ../cli/src/connections.c:1251
#, c-format
msgid "Error: 'show active': %s"
msgstr "錯誤：「show active」：%s"

#: ../cli/src/connections.c:1344
#, c-format
msgid "no active connection on device '%s'"
msgstr "裝置「%s」上沒有使用中的連線"

#: ../cli/src/connections.c:1352
msgid "no active connection or device"
msgstr "沒有使用中的連線或裝置"

#: ../cli/src/connections.c:1423
#, c-format
msgid "device '%s' not compatible with connection '%s'"
msgstr "裝置「%s」和連線「%s」不相容"

#: ../cli/src/connections.c:1426
#, c-format
msgid "no device found for connection '%s'"
msgstr "連線「%s」沒有找到任何裝置"

#: ../cli/src/connections.c:1438
msgid "unknown reason"
msgstr "原因不明"

#: ../cli/src/connections.c:1440 ../cli/src/network-manager.c:288
msgid "none"
msgstr "none"

#: ../cli/src/connections.c:1442
msgid "the user was disconnected"
msgstr "該使用者已經斷線"

#: ../cli/src/connections.c:1444
msgid "the base network connection was interrupted"
msgstr "基礎的網路連線已經中斷"

#: ../cli/src/connections.c:1446
msgid "the VPN service stopped unexpectedly"
msgstr "VPN 服務無預期停止"

#: ../cli/src/connections.c:1448
msgid "the VPN service returned invalid configuration"
msgstr "VPN 服務傳回無效的配置"

#: ../cli/src/connections.c:1450
msgid "the connection attempt timed out"
msgstr "嚐試連線已經逾時"

#: ../cli/src/connections.c:1452
msgid "the VPN service did not start in time"
msgstr "VPN 服務並沒有按時開始"

#: ../cli/src/connections.c:1454
msgid "the VPN service failed to start"
msgstr "VPN 服務無法開始"

#: ../cli/src/connections.c:1456
msgid "no valid VPN secrets"
msgstr "VPN 密碼不正確"

#: ../cli/src/connections.c:1458
msgid "invalid VPN secrets"
msgstr "VPN 密碼不正確"

#: ../cli/src/connections.c:1460
msgid "the connection was removed"
msgstr "連線已移除"

#: ../cli/src/connections.c:1477 ../cli/src/connections.c:1633
#: ../cli/src/connections.c:6016
#, c-format
msgid "Connection successfully activated (D-Bus active path: %s)\n"
msgstr "連線已成功啟用（D-Bus 啟用路徑：%s）\n"

#: ../cli/src/connections.c:1482
#, c-format
msgid "Error: Connection activation failed."
msgstr "錯誤：啟動連線失敗。"

#: ../cli/src/connections.c:1507
#, c-format
msgid "VPN connection successfully activated (D-Bus active path: %s)\n"
msgstr "VPN 連線已成功啟用（D-Bus 啟用路徑：%s）\n"

#: ../cli/src/connections.c:1514
#, c-format
msgid "Error: Connection activation failed: %s."
msgstr "錯誤：啟動連線失敗：%s。"

#: ../cli/src/connections.c:1532 ../cli/src/devices.c:1294
#, c-format
msgid "Error: Timeout %d sec expired."
msgstr "錯誤：逾時 %d 秒。"

#: ../cli/src/connections.c:1597
#, c-format
msgid ""
"Error: Device '%s' is waiting for slaves before proceeding with activation."
msgstr "錯誤：裝置「%s」正在等待 slave，以繼續進行啟用。"

#: ../cli/src/connections.c:1617
#, c-format
msgid "Error: Connection activation failed: %s"
msgstr "錯誤：啟動連線失敗：%s"

#: ../cli/src/connections.c:1722 ../cli/src/connections.c:1854
msgid "unknown error"
msgstr "不明的錯誤"

#: ../cli/src/connections.c:1730
#, c-format
msgid "unknown device '%s'."
msgstr "不明的裝置「%s」。"

#: ../cli/src/connections.c:1735
msgid "neither a valid connection nor device given"
msgstr "連線無效或是無裝置"

#: ../cli/src/connections.c:1773 ../cli/src/connections.c:1884
#: ../cli/src/connections.c:7714
msgid "Connection (name, UUID, or path): "
msgstr "連線（名稱、UUID 或是路徑）："

#: ../cli/src/connections.c:1829 ../cli/src/devices.c:1171
#: ../cli/src/devices.c:1647 ../cli/src/devices.c:2092
#: ../cli/src/devices.c:2386
#, c-format
msgid "Unknown parameter: %s\n"
msgstr "不明的參數：%s\n"

#: ../cli/src/connections.c:1862
msgid "preparing"
msgstr "正在準備"

#: ../cli/src/connections.c:1889 ../cli/src/connections.c:7719
#: ../cli/src/connections.c:7832
#, c-format
msgid "Error: No connection specified."
msgstr "錯誤：尚未指定連線。"

#: ../cli/src/connections.c:2237 ../cli/src/utils.c:490
#, c-format
msgid "'%s' not among [%s]"
msgstr "「%s」不在「%s」之間"

#: ../cli/src/connections.c:2319
#, c-format
msgid "Error: '%s': '%s' is not a valid %s MAC address."
msgstr "錯誤：「%s」：「%s」不是個有效的 %s MAC 位址。"

#: ../cli/src/connections.c:2320 ../tui/nm-editor-utils.c:173
#: ../tui/nm-ui-utils.c:347
msgid "InfiniBand"
msgstr "InfiniBand"

#: ../cli/src/connections.c:2320 ../tui/nm-editor-utils.c:156
#: ../tui/nm-ui-utils.c:335
msgid "Ethernet"
msgstr "Ethernet"

#: ../cli/src/connections.c:2343
#, c-format
msgid "Error: 'mtu': '%s' is not a valid MTU."
msgstr "錯誤：「mtu」：「%s」不是個有效的 MTU。"

#: ../cli/src/connections.c:2359
#, c-format
msgid "Error: 'parent': '%s' is not a valid interface name."
msgstr "錯誤：「parent」：「%s」不是組有效的介面卡名稱。"

#: ../cli/src/connections.c:2380
#, c-format
msgid "Error: 'p-key': '%s' is not a valid InfiniBand P_KEY."
msgstr "錯誤：「p-key」：「%s」不是組有效的 InfiniBand P_KEY。"

#: ../cli/src/connections.c:2396
#, c-format
msgid ""
"Error: 'mode': '%s' is not a valid InfiniBand transport mode [datagram, "
"connected]."
msgstr "錯誤：「mode」：「%s」不是個有效的 InfiniBand 傳輸模式「datagram、connected」。"

#: ../cli/src/connections.c:2412
#, c-format
msgid "Error: 'flags': '%s' is not valid; use <0-7>."
msgstr "錯誤：「flags」：「%s」無效；使用 <0-7>。"

#: ../cli/src/connections.c:2434
#, c-format
msgid "Error: '%s': '%s' is not valid; %s "
msgstr "錯誤：「%s」：「%s」無效；%s"

#: ../cli/src/connections.c:2541
#, c-format
msgid "Error: '%s': '%s' is not valid; use <%u-%u>."
msgstr "錯誤：「%s」：「%s」無效；使用 <%u-%u>。"

#: ../cli/src/connections.c:2555
msgid "ethernet"
msgstr "乙太網路"

#: ../cli/src/connections.c:2555 ../tui/nm-editor-utils.c:164
#: ../tui/nm-ui-utils.c:337
msgid "Wi-Fi"
msgstr "無線網路"

#: ../cli/src/connections.c:2558
#, c-format
msgid "There are 3 optional arguments for '%s' connection type.\n"
msgstr "「%s」連線類型有三個選用性引數。\n"

#: ../cli/src/connections.c:2559 ../cli/src/connections.c:2613
#: ../cli/src/connections.c:2735 ../cli/src/connections.c:2781
#: ../cli/src/connections.c:2841 ../cli/src/connections.c:2909
#: ../cli/src/connections.c:3072 ../cli/src/connections.c:3168
#: ../cli/src/connections.c:3250
msgid "Do you want to provide them? (yes/no) [yes] "
msgstr "您是否希望提供它們？（yes/no）[yes]"

#: ../cli/src/connections.c:2567 ../cli/src/connections.c:2621
#: ../cli/src/connections.c:2748 ../cli/src/connections.c:2849
msgid "MTU [auto]: "
msgstr "MTU [auto]："

#: ../cli/src/connections.c:2578 ../cli/src/connections.c:2632
#: ../cli/src/connections.c:2711 ../cli/src/connections.c:2759
msgid "MAC [none]: "
msgstr "MAC [none]："

#: ../cli/src/connections.c:2589
msgid "Cloned MAC [none]: "
msgstr "Cloned MAC [none]："

#: ../cli/src/connections.c:2612
#, c-format
msgid "There are 5 optional arguments for 'InfiniBand' connection type.\n"
msgstr "「InfiniBand」連線類型有五個選用性引數。\n"

#: ../cli/src/connections.c:2643
msgid "Transport mode (datagram or connected) [datagram]: "
msgstr "傳輸模式（datagram 或是 connected）[datagram]："

#: ../cli/src/connections.c:2656
msgid "Parent interface [none]: "
msgstr "父介面卡 [none]："

#: ../cli/src/connections.c:2667
msgid "P_KEY [none]: "
msgstr "P_KEY [none]："

#: ../cli/src/connections.c:2677
#, c-format
msgid "Error: 'p-key' is mandatory when 'parent' is specified.\n"
msgstr "錯誤：當指定了「parent」時，「p-key」是必要的。\n"

#: ../cli/src/connections.c:2702
#, c-format
msgid "There is 1 optional argument for 'WiMax' connection type.\n"
msgstr "「WiMax」連線類型有一項選用性引數。\n"

#: ../cli/src/connections.c:2703 ../cli/src/connections.c:2805
#: ../cli/src/connections.c:3024 ../cli/src/connections.c:3226
msgid "Do you want to provide it? (yes/no) [yes] "
msgstr "您是否希望提供它？（yes/no）[yes]"

#: ../cli/src/connections.c:2734
#, c-format
msgid "There are 4 optional arguments for 'PPPoE' connection type.\n"
msgstr "「PPPoE」的連線類型有四個選用引數。\n"

#: ../cli/src/connections.c:2742 ../cli/src/connections.c:2790
msgid "Password [none]: "
msgstr "密碼 [none]："

#: ../cli/src/connections.c:2744
msgid "Service [none]: "
msgstr "服務 [none]："

#: ../cli/src/connections.c:2780
#, c-format
msgid ""
"There are 2 optional arguments for 'mobile broadband' connection type.\n"
msgstr "「行動寬頻」連線類型有兩個選用性引數。\n"

#: ../cli/src/connections.c:2788 ../cli/src/connections.c:3233
msgid "Username [none]: "
msgstr "使用者名稱 [none]："

#: ../cli/src/connections.c:2804
#, c-format
msgid "There is 1 optional argument for 'bluetooth' connection type.\n"
msgstr "「bluetooth」連線類型有一項選用性引數。\n"

#: ../cli/src/connections.c:2813
msgid "Bluetooth type (panu, dun-gsm or dun-cdma) [panu]: "
msgstr "藍牙類型（panu、dun-gsm 或是 dun-cdma）[panu]："

#: ../cli/src/connections.c:2821
#, c-format
msgid "Error: 'bt-type': '%s' is not a valid bluetooth type.\n"
msgstr "錯誤：「bt-type」：「%s」不是個有效的藍牙類型。\n"

#: ../cli/src/connections.c:2840
#, c-format
msgid "There are 4 optional arguments for 'VLAN' connection type.\n"
msgstr "「VLAN」連線類型有四個選用性引數。\n"

#: ../cli/src/connections.c:2860
msgid "VLAN flags (<0-7>) [none]: "
msgstr "VLAN 旗標（<0-7>）[none]："

#: ../cli/src/connections.c:2871
msgid "Ingress priority maps [none]: "
msgstr "Ingress 優先順序對映 [none]："

#: ../cli/src/connections.c:2882
msgid "Egress priority maps [none]: "
msgstr "Egress 優先順序對映 [none]："

#: ../cli/src/connections.c:2908
#, c-format
msgid "There are optional arguments for 'bond' connection type.\n"
msgstr "「bond」連線類型有選用性引數。\n"

#: ../cli/src/connections.c:2918
msgid "Bonding mode [balance-rr]: "
msgstr "Bonding 模式 [balance-rr]："

#: ../cli/src/connections.c:2934
msgid "Bonding primary interface [none]: "
msgstr "Bonding 主要介面卡 [none]："

#: ../cli/src/connections.c:2937
#, c-format
msgid "Error: 'primary': '%s' is not a valid interface name.\n"
msgstr "錯誤：「primary」：「%s」不是組有效的介面卡名稱。\n"

#: ../cli/src/connections.c:2945
msgid "Bonding monitoring mode (miimon or arp) [miimon]: "
msgstr "Bonding 監控模式（miimon 或是 arp）[miimon]："

#: ../cli/src/connections.c:2950
#, c-format
msgid "Error: '%s' is not a valid monitoring mode; use '%s' or '%s'.\n"
msgstr "錯誤：「%s」不是個有效的監控模式；請使用「%s」或是「%s」。\n"

#: ../cli/src/connections.c:2959
msgid "Bonding miimon [100]: "
msgstr "Bonding miimon [100]："

#: ../cli/src/connections.c:2962
#, c-format
msgid "Error: 'miimon': '%s' is not a valid number <0-%u>.\n"
msgstr "錯誤：「miimon」：「%s」不是個有效的數字 <0-%u>。\n"

#: ../cli/src/connections.c:2970
msgid "Bonding downdelay [0]: "
msgstr "Bonding downdelay [0]："

#: ../cli/src/connections.c:2973
#, c-format
msgid "Error: 'downdelay': '%s' is not a valid number <0-%u>.\n"
msgstr "錯誤：「downdelay」：「%s」不是個有效的數字 <0-%u>。\n"

#: ../cli/src/connections.c:2981
msgid "Bonding updelay [0]: "
msgstr "Bonding updelay [0]："

#: ../cli/src/connections.c:2984
#, c-format
msgid "Error: 'updelay': '%s' is not a valid number <0-%u>.\n"
msgstr "錯誤：「updelay」：「%s」不是個有效的數字 <0-%u>。\n"

#: ../cli/src/connections.c:2993
msgid "Bonding arp-interval [0]: "
msgstr "Bonding arp-interval [0]："

#: ../cli/src/connections.c:2996
#, c-format
msgid "Error: 'arp-interval': '%s' is not a valid number <0-%u>.\n"
msgstr "錯誤：「arp-interval」：「%s」不是個有效的數字 <0-%u>。\n"

#: ../cli/src/connections.c:3004
msgid "Bonding arp-ip-target [none]: "
msgstr "Bonding arp-ip-target [none]："

#: ../cli/src/connections.c:3023
#, c-format
msgid "There is 1 optional argument for '%s' connection type.\n"
msgstr "「%s」的連線類型有一個選用引數。\n"

#: ../cli/src/connections.c:3032
msgid "Team JSON configuration [none]: "
msgstr "團隊 JSON 的配置 [none]："

#: ../cli/src/connections.c:3051
msgid "team"
msgstr "team"

#: ../cli/src/connections.c:3057
msgid "team-slave"
msgstr "team-slave"

#: ../cli/src/connections.c:3071
#, c-format
msgid "There are 6 optional arguments for 'bridge' connection type.\n"
msgstr "「bridge」連線類型有六個選用性引數。\n"

#: ../cli/src/connections.c:3081
msgid "Enable STP (yes/no) [yes]: "
msgstr "啟用 STP（yes/no）[yes]："

#: ../cli/src/connections.c:3085
#, c-format
msgid "Error: 'stp': '%s'.\n"
msgstr "錯誤：「stp」：「%s」。\n"

#: ../cli/src/connections.c:3093
msgid "STP priority [128]: "
msgstr "STP 優先順序 [128]："

#: ../cli/src/connections.c:3097
#, c-format
msgid "Error: 'priority': '%s' is not a valid number <0-%d>.\n"
msgstr "錯誤：「priority」：「%s」不是個有效的數字 <0-%d>。\n"

#: ../cli/src/connections.c:3105
msgid "Forward delay [15]: "
msgstr "Forward delay [15]："

#: ../cli/src/connections.c:3109
#, c-format
msgid "Error: 'forward-delay': '%s' is not a valid number <2-30>.\n"
msgstr "錯誤：「forward-delay」：「%s」不是個有效的數字 <2-30>。\n"

#: ../cli/src/connections.c:3118
msgid "Hello time [2]: "
msgstr "Hello time [2]："

#: ../cli/src/connections.c:3122
#, c-format
msgid "Error: 'hello-time': '%s' is not a valid number <1-10>.\n"
msgstr "錯誤：「hello-time」：「%s」不是個有效的數字 <1-10>。\n"

#: ../cli/src/connections.c:3130
msgid "Max age [20]: "
msgstr "Max age [20]："

#: ../cli/src/connections.c:3134
#, c-format
msgid "Error: 'max-age': '%s' is not a valid number <6-40>.\n"
msgstr "錯誤：「max-age」：「%s」不是個有效的數字 <6-40>。\n"

#: ../cli/src/connections.c:3142
msgid "MAC address ageing time [300]: "
msgstr "MAC address ageing time [300]："

#: ../cli/src/connections.c:3146
#, c-format
msgid "Error: 'ageing-time': '%s' is not a valid number <0-1000000>.\n"
msgstr "錯誤：「ageing-time」：「%s」不是個有效的數字 <0-1000000>。\n"

#: ../cli/src/connections.c:3167
#, c-format
msgid "There are 3 optional arguments for 'bridge-slave' connection type.\n"
msgstr "「bridge-slave」連線類型有三個選用性引數。\n"

#: ../cli/src/connections.c:3176
msgid "Bridge port priority [32]: "
msgstr "橋接連接埠優先順序 [32]："

#: ../cli/src/connections.c:3189
msgid "Bridge port STP path cost [100]: "
msgstr "橋接連接埠 STP path cost [100]："

#: ../cli/src/connections.c:3203
msgid "Hairpin (yes/no) [yes]: "
msgstr "Hairpin（yes/no）[yes]："

#: ../cli/src/connections.c:3207
#, c-format
msgid "Error: 'hairpin': '%s'.\n"
msgstr "錯誤：「hairpin」：「%s」。\n"

#: ../cli/src/connections.c:3225
#, c-format
msgid "There is 1 optional argument for 'VPN' connection type.\n"
msgstr "「VPN」連線類型有一項選用性引數。\n"

#: ../cli/src/connections.c:3249
#, c-format
msgid "There are 2 optional arguments for 'OLPC Mesh' connection type.\n"
msgstr "「OLPC Mesh」連線類型有兩個選用性引數。\n"

#: ../cli/src/connections.c:3258
msgid "OLPC Mesh channel [1]: "
msgstr "OLPC Mesh channel [1]："

#: ../cli/src/connections.c:3261
#, c-format
msgid "Error: 'channel': '%s' is not a valid number <1-13>.\n"
msgstr "錯誤：「channel」：「%s」不是個有效的數字 <1-13>。\n"

#: ../cli/src/connections.c:3269
msgid "DHCP anycast MAC address [none]: "
msgstr "DHCP anycast MAC address [none]："

#: ../cli/src/connections.c:3317
msgid "IPv4 address (IP[/plen] [gateway]) [none]: "
msgstr "IPv4 address (IP[/plen] [gateway]) [none]："

#: ../cli/src/connections.c:3319
msgid "IPv6 address (IP[/plen] [gateway]) [none]: "
msgstr "IPv6 address (IP[/plen] [gateway]) [none]："

#: ../cli/src/connections.c:3337
#, c-format
msgid "  Address successfully added: %s %s\n"
msgstr "位址已成功新增：%s %s\n"

#: ../cli/src/connections.c:3339
#, c-format
msgid "  Warning: address already present: %s %s\n"
msgstr "警告：位址已存在：%s %s\n"

#: ../cli/src/connections.c:3341
#, c-format
msgid "  Warning: ignoring garbage at the end: '%s'\n"
msgstr "警告：將忽略尾端不必要的項目：「%s」\n"

#: ../cli/src/connections.c:3343 ../cli/src/connections.c:4192
#: ../cli/src/connections.c:4247 ../cli/src/connections.c:4646
#: ../cli/src/connections.c:4656
msgid "Error: "
msgstr "錯誤："

#: ../cli/src/connections.c:3361
msgid "Do you want to add IP addresses? (yes/no) [yes] "
msgstr "您是否希望新增 IP 位址？（yes/no）[yes]"

#: ../cli/src/connections.c:3367
#, c-format
msgid "Press <Enter> to finish adding addresses.\n"
msgstr "按下 <Enter> 來完成新增位址。\n"

#: ../cli/src/connections.c:3513
#, c-format
msgid "Error: 'parent': not valid without 'p-key'."
msgstr "錯誤：「parent」：缺少「p-key」無效。"

#: ../cli/src/connections.c:3569 ../cli/src/connections.c:4562
msgid "SSID: "
msgstr "SSID："

#: ../cli/src/connections.c:3572 ../cli/src/connections.c:4565
msgid "Error: 'ssid' is required."
msgstr "錯誤：需要「ssid」。"

#: ../cli/src/connections.c:3636
msgid "WiMAX NSP name: "
msgstr "WiMAX NSP 名稱："

#: ../cli/src/connections.c:3639
msgid "Error: 'nsp' is required."
msgstr "錯誤：需要「nsp」。"

#: ../cli/src/connections.c:3694
msgid "PPPoE username: "
msgstr "PPPoE 使用者名稱："

#: ../cli/src/connections.c:3697
msgid "Error: 'username' is required."
msgstr "錯誤：需要「username」。"

#: ../cli/src/connections.c:3768
msgid "APN: "
msgstr "APN："

#: ../cli/src/connections.c:3771
msgid "Error: 'apn' is required."
msgstr "錯誤：需要「apn」。"

#: ../cli/src/connections.c:3830
msgid "Bluetooth device address: "
msgstr "藍牙裝置位址："

#: ../cli/src/connections.c:3833
msgid "Error: 'addr' is required."
msgstr "錯誤：需要「addr」。"

#: ../cli/src/connections.c:3876
#, c-format
msgid "Error: 'bt-type': '%s' not valid; use [%s, %s (%s), %s]."
msgstr "錯誤：「bt-type」：「%s」無效；請使用 [%s, %s (%s), %s]。"

#: ../cli/src/connections.c:3921
msgid "VLAN parent device or connection UUID: "
msgstr "VLAN 父裝置或連線 UUID："

#: ../cli/src/connections.c:3924
msgid "Error: 'dev' is required."
msgstr "錯誤：需要「dev」。"

#: ../cli/src/connections.c:3928
msgid "VLAN ID <0-4095>: "
msgstr "VLAN ID <0-4095>："

#: ../cli/src/connections.c:3931
msgid "Error: 'id' is required."
msgstr "錯誤：需要「id」。"

#: ../cli/src/connections.c:3937
#, c-format
msgid "Error: 'id': '%s' is not valid; use <0-4095>."
msgstr "錯誤：「id」：「%s」無效；請使用 <0-4095>。"

#: ../cli/src/connections.c:3947
#, c-format
msgid "Error: 'dev': '%s' is neither UUID, interface name, nor MAC."
msgstr "錯誤：「dev」：「%s」不是 UUID、介面卡名稱，或是 MAC。"

#: ../cli/src/connections.c:4082
#, c-format
msgid "Error: 'mode': %s."
msgstr "錯誤：「mode」：%s。"

#: ../cli/src/connections.c:4091
#, c-format
msgid "Error: 'primary': '%s' is not a valid interface name."
msgstr "錯誤：「primary」：「%s」不是組有效的介面卡名稱。"

#: ../cli/src/connections.c:4134
msgid "Bond master: "
msgstr "Bond master："

#: ../cli/src/connections.c:4137 ../cli/src/connections.c:4229
#: ../cli/src/connections.c:4416
msgid "Error: 'master' is required."
msgstr "錯誤：需要「mater」。"

#: ../cli/src/connections.c:4142 ../cli/src/connections.c:4239
#: ../cli/src/connections.c:4427
#, c-format
msgid ""
"Warning: 'type' is currently ignored. We only support ethernet slaves for "
"now.\n"
msgstr "警告：「type」目前已被忽略。我們目前僅支援乙太網路 slave。\n"

#: ../cli/src/connections.c:4226
msgid "Team master: "
msgstr "Team master："

#: ../cli/src/connections.c:4329
#, c-format
msgid "Error: 'stp': %s."
msgstr "錯誤：「stp」：%s。"

#: ../cli/src/connections.c:4413
msgid "Bridge master: "
msgstr "Bridge master："

#: ../cli/src/connections.c:4421
#, c-format
msgid "Error: 'master': '%s' is not valid UUID nor interface."
msgstr "錯誤：「master」：「%s」不是個有效的 UUID 或是介面卡。"

#: ../cli/src/connections.c:4454
#, c-format
msgid "Error: 'hairpin': %s."
msgstr "錯誤：「hairpin」：%s。"

#: ../cli/src/connections.c:4506
msgid "VPN type: "
msgstr "VPN 類型："

#: ../cli/src/connections.c:4509
msgid "Error: 'vpn-type' is required."
msgstr "錯誤：需要「vpn-type」。"

#: ../cli/src/connections.c:4520
#, c-format
msgid "Error: 'vpn-type': %s."
msgstr "錯誤：「vpn-type」：%s。"

#: ../cli/src/connections.c:4578
#, c-format
msgid "Error: 'channel': '%s' is not valid; use <1-13>."
msgstr "錯誤：「channel」：「%s」無效；請使用 <1-13>。"

#: ../cli/src/connections.c:4613
#, c-format
msgid "Error: '%s' is not a valid connection type."
msgstr "錯誤：「%s」不是個有效的連線類型。"

#: ../cli/src/connections.c:4711
#, c-format
msgid "Error: Failed to add '%s' connection: (%d) %s"
msgstr "錯誤：無法新增「%s」連線：(%d) %s"

#: ../cli/src/connections.c:4715
#, c-format
msgid "Connection '%s' (%s) successfully added.\n"
msgstr "連線「%s」 (%s) 已成功新增。\n"

#: ../cli/src/connections.c:4761
msgid "Connection type: "
msgstr "連線類型："

#: ../cli/src/connections.c:4765
#, c-format
msgid "Error: 'type' argument is required."
msgstr "錯誤：需要「type」引數。"

#: ../cli/src/connections.c:4771
#, c-format
msgid "Error: invalid connection type; %s."
msgstr "錯誤：無效的連線類型；%s。"

#: ../cli/src/connections.c:4780
#, c-format
msgid "Error: 'autoconnect': %s."
msgstr "錯誤：「autoconnect」：%s。"

#: ../cli/src/connections.c:4796
msgid "Interface name [*]: "
msgstr "介面卡名稱 [*]："

#: ../cli/src/connections.c:4801
#, c-format
msgid "Error: 'ifname' argument is required."
msgstr "錯誤：需要「ifname」引數。"

#: ../cli/src/connections.c:4808
#, c-format
msgid "Error: 'ifname': '%s' is not a valid interface nor '*'."
msgstr "錯誤：「ifname」：「%s」不是個有效的介面卡或是「*」。"

#: ../cli/src/connections.c:5627
#, c-format
msgid "['%s' setting values]\n"
msgstr "[「%s」設定值]\n"

#: ../cli/src/connections.c:5708
#, c-format
msgid ""
"---[ Main menu ]---\n"
"goto     [<setting> | <prop>]        :: go to a setting or property\n"
"remove   <setting>[.<prop>] | <prop> :: remove setting or reset property "
"value\n"
"set      [<setting>.<prop> <value>]  :: set property value\n"
"describe [<setting>.<prop>]          :: describe property\n"
"print    [all]                       :: print the connection\n"
"verify   [all]                       :: verify the connection\n"
"save                                 :: save the connection\n"
"activate [<ifname>] [/<ap>|<nsp>]    :: activate the connection\n"
"back                                 :: go one level up (back)\n"
"help/?   [<command>]                 :: print this help\n"
"nmcli    <conf-option> <value>       :: nmcli configuration\n"
"quit                                 :: exit nmcli\n"
msgstr ""
"---[ Main menu ]---\n"
"goto     [<setting> | <prop>]        :: 前往某項設定或內容\n"
"remove   <setting>[.<prop>] | <prop> :: 移除設定或重設內容值\n"
"set      [<setting>.<prop> <value>]  :: 設定內容值\n"
"describe [<setting>.<prop>]          :: 描述內容\n"
"print    [all]                       :: 列印連線\n"
"verify   [all]                       :: 驗證連線\n"
"save                                 :: 儲存連線\n"
"activate [<ifname>] [/<ap>|<nsp>]    :: 啟用連線\n"
"back                                 :: 往後返回一層\n"
"help/?   [<command>]                 :: 印出此協助畫面\n"
"nmcli    <conf-option> <value>       :: nmcli 配置\n"
"quit                                 :: 退出 nmcli\n"

#: ../cli/src/connections.c:5735
#, c-format
msgid ""
"goto <setting>[.<prop>] | <prop>  :: enter setting/property for editing\n"
"\n"
"This command enters into a setting or property for editing it.\n"
"\n"
"Examples: nmcli> goto connection\n"
"          nmcli connection> goto secondaries\n"
"          nmcli> goto ipv4.addresses\n"
msgstr ""
"goto <setting>[.<prop>] | <prop>  :: 進入設定/內容以進行編輯\n"
"\n"
"這項指令會進入一項設定或內容以讓您針對其進行編輯。\n"
"\n"
"範例：nmcli> goto connection\n"
"          nmcli connection> goto secondaries\n"
"          nmcli> goto ipv4.addresses\n"

#: ../cli/src/connections.c:5742
#, c-format
msgid ""
"remove <setting>[.<prop>]  :: remove setting or reset property value\n"
"\n"
"This command removes an entire setting from the connection, or if a property\n"
"is given, resets that property to the default value.\n"
"\n"
"Examples: nmcli> remove wifi-sec\n"
"          nmcli> remove eth.mtu\n"
msgstr ""
"remove <setting>[.<prop>]  :: 移除設定或重設內容值\n"
"\n"
"這項指令會移除連線的所有設定，或是若\n"
"提供的乃內容的話，會將內容重設爲預設值。\n"
"\n"
"範例：nmcli> remove wifi-sec\n"
"          nmcli> remove eth.mtu\n"

#: ../cli/src/connections.c:5749
#, c-format
msgid ""
"set [<setting>.<prop> <value>]  :: set property value\n"
"\n"
"This command sets property value.\n"
"\n"
"Example: nmcli> set con.id My connection\n"
msgstr ""
"set [<setting>.<prop> <value>]  :: 設置內容值\n"
"\n"
"這項指令會設置內容的值。\n"
"\n"
"範例：nmcli> set con.id My connection\n"

#: ../cli/src/connections.c:5754
#, c-format
msgid ""
"describe [<setting>.<prop>]  :: describe property\n"
"\n"
"Shows property description. You can consult nm-settings(5) manual page to "
"see all NM settings and properties.\n"
msgstr ""
"describe [<setting>.<prop>]  :: 描述內容\n"
"\n"
"顯示內容的描述。您可查看 nm-settings(5) man page，以檢視所有的 NM 設定和內容屬性。\n"

#: ../cli/src/connections.c:5759
#, c-format
msgid ""
"print [all]  :: print setting or connection values\n"
"\n"
"Shows current property or the whole connection.\n"
"\n"
"Example: nmcli ipv4> print all\n"
msgstr "print [all]  :: 印出設定或是連線值\n"
"\n"
"顯示目前的內容或是整個連線。\n"
"\n"
"範例：nmcli ipv4> print all\n"

#: ../cli/src/connections.c:5764
#, c-format
msgid ""
"verify [all]  :: verify setting or connection validity\n"
"\n"
"Verifies whether the setting or connection is valid and can be saved later. "
"It indicates invalid values on error.\n"
"\n"
"Examples: nmcli> verify\n"
"          nmcli bond> verify\n"
msgstr ""
"verify [all]  :: 驗證設定或連線是否有效\n"
"\n"
"驗證設定或連線是否有效，並且可在之後進行儲存。它會顯示無效的值或是錯誤。\n"
"\n"
"範例：nmcli> verify\n"
"          nmcli bond> verify\n"

#: ../cli/src/connections.c:5771
#, c-format
msgid ""
"save  :: save the connection\n"
"\n"
"Sends the connection to NetworkManager that will save it.\n"
msgstr "save  :: 儲存連線\n"
"\n"
"將連線傳送至 NetworkManager，並將它儲存。\n"

#: ../cli/src/connections.c:5775
#, c-format
msgid ""
"activate [<ifname>] [/<ap>|<nsp>]  :: activate the connection\n"
"\n"
"Activates the connection.\n"
"\n"
"Available options:\n"
"<ifname>    - device the connection will be activated on\n"
"/<ap>|<nsp> - AP (Wi-Fi) or NSP (WiMAX) (prepend with / when <ifname> is not "
"specified)\n"
msgstr ""
"activate [<ifname>] [/<ap>|<nsp>]  :: 啟用連線\n"
"\n"
"啟用連線。\n"
"\n"
"可用選項：\n"
"<ifname>    - 連線將會被啟用於的裝置\n"
"  /<ap>|<nsp> - AP（Wi-Fi）或是 NSP（WiMAX）（當未指定 <ifname> 時，以 / 作為前置）\n"

#: ../cli/src/connections.c:5782 ../cli/src/connections.c:5932
#, c-format
msgid "back  :: go to upper menu level\n"
"\n"
msgstr "back  :: 往上返回上一層的選單\n"
"\n"

#: ../cli/src/connections.c:5785
#, c-format
msgid "help/? [<command>]  :: help for the nmcli commands\n"
"\n"
msgstr "help/? [<command>]  :: nmcli 指令的協助\n"
"\n"

#: ../cli/src/connections.c:5788
#, c-format
msgid ""
"nmcli [<conf-option> <value>]  :: nmcli configuration\n"
"\n"
"Configures nmcli. The following options are available:\n"
"status-line yes | no        [default: no]\n"
"save-confirmation yes | no  [default: yes]\n"
"prompt-color <0-8>          [default: 0]\n"
"  0 = normal\n"
"  1 = black\n"
"  2 = red\n"
"  3 = green\n"
"  4 = yellow\n"
"  5 = blue\n"
"  6 = magenta\n"
"  7 = cyan\n"
"  8 = white\n"
"\n"
"Examples: nmcli> nmcli status-line yes\n"
"          nmcli> nmcli save-confirmation no\n"
"          nmcli> nmcli prompt-color 3\n"
msgstr ""
"nmcli [<conf-option> <value>]  :: nmcli 配置\n"
"\n"
"配置 nmcli。下列爲可用的選項：\n"
"status-line yes | no        [default: no]\n"
"save-confirmation yes | no  [default: yes]\n"
"prompt-color <0-8>          [default: 0]\n"
"  0 = normal\n"
"  1 = black\n"
"  2 = red\n"
"  3 = green\n"
"  4 = yellow\n"
"  5 = blue\n"
"  6 = magenta\n"
"  7 = cyan\n"
"  8 = white\n"
"\n"
"範例：nmcli> nmcli status-line yes\n"
"          nmcli> nmcli save-confirmation no\n"
"          nmcli> nmcli prompt-color 3\n"

#: ../cli/src/connections.c:5808 ../cli/src/connections.c:5938
#, c-format
msgid ""
"quit  :: exit nmcli\n"
"\n"
"This command exits nmcli. When the connection being edited is not saved, the "
"user is asked to confirm the action.\n"
msgstr "quit  :: 退出 nmcli\n"
"\n"
"這項指令會退出 nmcli。當被編輯的連線尚未儲存時，使用者會被要求確認動作。\n"

#: ../cli/src/connections.c:5813 ../cli/src/connections.c:5943
#: ../cli/src/connections.c:6313 ../cli/src/connections.c:7162
#, c-format
msgid "Unknown command: '%s'\n"
msgstr "不明的指令：「%s」\n"

#: ../cli/src/connections.c:5879
#, c-format
msgid ""
"---[ Property menu ]---\n"
"set      [<value>]               :: set new value\n"
"add      [<value>]               :: add new option to the property\n"
"change                           :: change current value\n"
"remove   [<index> | <option>]    :: delete the value\n"
"describe                         :: describe property\n"
"print    [setting | connection]  :: print property (setting/connection) "
"value(s)\n"
"back                             :: go to upper level\n"
"help/?   [<command>]             :: print this help or command description\n"
"quit                             :: exit nmcli\n"
msgstr ""
"---[ 內容選單 ]---\n"
"set      [<value>]               :: 設定新的值\n"
"add      [<value>]               :: 新增選項至內容\n"
"change                           :: 更改目前的值\n"
"remove   [<index> | <option>]    :: 刪除值\n"
"describe                         :: 描述值\n"
"print    [setting | connection]  :: 印出內容（設定/連線）的值\n"
"back                             :: 往上一層\n"
"help/?   [<command>]             :: 印出此協助或指令描述\n"
"quit                             :: 退出 nmcli\n"

#: ../cli/src/connections.c:5904
#, c-format
msgid ""
"set [<value>]  :: set new value\n"
"\n"
"This command sets provided <value> to this property\n"
msgstr "set [<value>]  :: 設定新的值\n"
"\n"
"這項指令會將提供的 <value> 設置至此內容\n"

#: ../cli/src/connections.c:5908
#, c-format
msgid ""
"add [<value>]  :: add new option to the property\n"
"\n"
"This command add provided <value> to this property, if the property is of a "
"container type. For single-valued properties it replaces the value (same as "
"'set').\n"
msgstr ""
"add [<value>]  :: 新增選項至內容\n"
"\n"
"這項指令會將提供的 <value> 新增至此內容（若這項內容乃 container 類型的話）。若是單值的內容，它會將值替換掉（和「set」相同）。\n"

#: ../cli/src/connections.c:5914
#, c-format
msgid ""
"change  :: change current value\n"
"\n"
"Displays current value and allows editing it.\n"
msgstr "change  :: 更改目前的值\n"
"\n"
"顯示目前的值，並允許對其進行編輯。\n"

#: ../cli/src/connections.c:5918
#, c-format
msgid ""
"remove [<index>|<option>]  :: delete the value\n"
"\n"
"Removes the property value (sets it to default).\n"
msgstr "remove [<index>|<option>]  :: 刪除值\n"
"\n"
"移除內容的值（將它設為預設值）。\n"

#: ../cli/src/connections.c:5922
#, c-format
msgid ""
"describe  :: describe property\n"
"\n"
"Shows property description. You can consult nm-settings(5) manual page to "
"see all NM settings and properties.\n"
msgstr ""
"describe  :: 描述內容\n"
"\n"
"顯示內容的描述。您可查看 nm-settings(5) man page 以檢視所有的 NM 設定和內容。\n"

#: ../cli/src/connections.c:5927
#, c-format
msgid ""
"print [property|setting|connection]  :: print property (setting, connection) "
"value(s)\n"
"\n"
"Shows property value. Providing an argument you can also display values for "
"the whole setting or connection.\n"
msgstr ""
"print [property|setting|connection]  :: 印出內容（設定、連線）的值\n"
"\n"
"顯示內容的值。提供一項引數，您亦可顯示整個設定或是連線的值。\n"

#: ../cli/src/connections.c:5935
#, c-format
msgid "help/? [<command>]  :: help for nmcli commands\n"
"\n"
msgstr "help/? [<command>]  :: nmcli 指令的協助\n"
"\n"

#: ../cli/src/connections.c:6022
#, c-format
msgid "Error: Connection activation failed.\n"
msgstr "錯誤：連線啟用失敗。\n"

#: ../cli/src/connections.c:6093
#, c-format
msgid "Error: setting '%s' is mandatory and cannot be removed.\n"
msgstr "錯誤：設定「%s」乃必要的，並且不可移除。\n"

#: ../cli/src/connections.c:6111
#, c-format
msgid "[ Connection type: %s | name: %s | UUID: %s | dirty: %s ]\n"
msgstr "[ Connection type: %s | name: %s | UUID: %s | dirty: %s ]\n"

#: ../cli/src/connections.c:6171
#, c-format
msgid ""
"The connection profile has been removed from another client. You may type "
"'save' in the main menu to restore it.\n"
msgstr "連線設定檔已經從另一個客戶端上移除。您可以在主選單輸入「儲存」來復原。\n"

#: ../cli/src/connections.c:6192 ../cli/src/connections.c:6615
#: ../cli/src/connections.c:6673
#, c-format
msgid "Enter '%s' value: "
msgstr "輸入「%s」的值："

#: ../cli/src/connections.c:6209 ../cli/src/connections.c:6228
#: ../cli/src/connections.c:6621 ../cli/src/connections.c:6680
#, c-format
msgid "Error: failed to set '%s' property: %s\n"
msgstr "錯誤：設置「%s」內容失敗：%s\n"

#: ../cli/src/connections.c:6221
#, c-format
msgid "Edit '%s' value: "
msgstr "編輯「%s」的值："

#: ../cli/src/connections.c:6250
#, c-format
msgid "Error: %s\n"
msgstr "錯誤：%s\n"

#: ../cli/src/connections.c:6256 ../cli/src/connections.c:6759
#: ../cli/src/connections.c:6800
#, c-format
msgid "Error: failed to remove value of '%s': %s\n"
msgstr "錯誤：移除「%s」的值失敗：%s\n"

#: ../cli/src/connections.c:6277
#, c-format
msgid "Unknown command argument: '%s'\n"
msgstr "不明的檔案引數：「%s」\n"

#: ../cli/src/connections.c:6297 ../cli/src/connections.c:7150
msgid "The connection is not saved. Do you really want to quit? [y/n]\n"
msgstr "連線尚未儲存。您是否真的希望退出？[y/n]\n"

#: ../cli/src/connections.c:6409
#, c-format
msgid "Available settings: %s\n"
msgstr "可用設定：%s\n"

#: ../cli/src/connections.c:6418
#, c-format
msgid "Error: invalid setting name; %s\n"
msgstr "錯誤：無效的設定名稱；%s\n"

#: ../cli/src/connections.c:6435
#, c-format
msgid "Available properties: %s\n"
msgstr "可用的內容：%s\n"

#: ../cli/src/connections.c:6443
#, c-format
msgid "Error: property %s\n"
msgstr "錯誤：內容 %s\n"

#: ../cli/src/connections.c:6484
msgid ""
"Saving the connection with 'autoconnect=yes'. That might result in an "
"immediate activation of the connection.\n"
"Do you still want to save? [yes] "
msgstr "以「autoconnect=yes」儲存連線。這可能會即刻將連線啟用。\n"
"您是否還是希望儲存？[是]"

#: ../cli/src/connections.c:6557
#, c-format
msgid "You may edit the following settings: %s\n"
msgstr "您可編輯以下設定：%s\n"

#: ../cli/src/connections.c:6583
#, c-format
msgid ""
"The connection profile has been removed from another client. You may type "
"'save' to restore it.\n"
msgstr "連線設定檔已經從另一個客戶端上移除。您可輸入「儲存」來復原。\n"

#: ../cli/src/connections.c:6613 ../cli/src/connections.c:6671
#, c-format
msgid "Allowed values for '%s' property: %s\n"
msgstr "「%s」內容所能使用的值：%s\n"

#: ../cli/src/connections.c:6625 ../cli/src/connections.c:6842
#, c-format
msgid "Error: no setting selected; valid are [%s]\n"
msgstr "錯誤：尚未選擇設定；有效的值爲「%s」\n"

#: ../cli/src/connections.c:6626
#, c-format
msgid "use 'goto <setting>' first, or 'set <setting>.<property>'\n"
msgstr "先使用「goto <setting>」，或是「set <setting>.<property>」\n"

#: ../cli/src/connections.c:6641 ../cli/src/connections.c:6779
#: ../cli/src/connections.c:6859
#, c-format
msgid "Error: invalid setting argument '%s'; valid are [%s]\n"
msgstr "錯誤：無效的設定引數「%s」；有效的值爲「%s」\n"

#: ../cli/src/connections.c:6651
#, c-format
msgid "Error: missing setting for '%s' property\n"
msgstr "錯誤：「%s」內容的設定遺失\n"

#: ../cli/src/connections.c:6658
#, c-format
msgid "Error: invalid property: %s\n"
msgstr "錯誤：無效的內容：%s\n"

#: ../cli/src/connections.c:6707
#, c-format
msgid "Error: unknown setting '%s'\n"
msgstr "錯誤：「%s」設定不明\n"

#: ../cli/src/connections.c:6720
#, c-format
msgid "You may edit the following properties: %s\n"
msgstr "您可編輯下列內容：%s\n"

#: ../cli/src/connections.c:6764
#, c-format
msgid "Error: no argument given; valid are [%s]\n"
msgstr "錯誤：尚未提供引數；有效的值爲「%s」\n"

#: ../cli/src/connections.c:6777
#, c-format
msgid "Setting '%s' is not present in the connection.\n"
msgstr "設定「%s」不存在連線中。\n"

#: ../cli/src/connections.c:6818
#, c-format
msgid "Error: %s properties, nor it is a setting name.\n"
msgstr "錯誤：%s 內容，它也不是組設定名稱。\n"

#: ../cli/src/connections.c:6843
#, c-format
msgid "use 'goto <setting>' first, or 'describe <setting>.<property>'\n"
msgstr "先使用「goto <setting>」，或是「describe <setting>.<property>」\n"

#: ../cli/src/connections.c:6884
#, c-format
msgid "Error: invalid property: %s, neither a valid setting name.\n"
msgstr "錯誤：無效的內容：%s，也不是組有效的設定名稱。\n"

#: ../cli/src/connections.c:6908
#, c-format
msgid "Error: '%s' setting not present\n"
msgstr "錯誤：「%s」設定不存在\n"

#: ../cli/src/connections.c:6911
#, c-format
msgid "Error: unknown setting: '%s'\n"
msgstr "錯誤：不明的設定：「%s」\n"

#: ../cli/src/connections.c:6927
#, c-format
msgid "Verify setting '%s': %s\n"
msgstr "驗證設定「%s」：%s\n"

#: ../cli/src/connections.c:6934
#, c-format
msgid "Verify connection: %s\n"
msgstr "驗證連線：%s\n"

#: ../cli/src/connections.c:6973
#, c-format
msgid "Error: Failed to save '%s' (%s) connection: (%d) %s\n"
msgstr "錯誤：儲存「%s」(%s)連線失敗：(%d) %s\n"

#: ../cli/src/connections.c:6980
#, c-format
msgid "Connection '%s' (%s) successfully saved.\n"
msgstr "連線「%s」(%s) 已成功儲存。\n"

#: ../cli/src/connections.c:7014
#, c-format
msgid "Error: connection verification failed: %s\n"
msgstr "錯誤：連線驗證失敗：%s\n"

#: ../cli/src/connections.c:7015
msgid "(unknown error)"
msgstr "（不明錯誤）"

#: ../cli/src/connections.c:7036
#, c-format
msgid "Error: connection is not saved. Type 'save' first.\n"
msgstr "錯誤：連線尚未儲存。請先輸入「save」。\n"

#: ../cli/src/connections.c:7040
#, c-format
msgid "Error: connection is not valid: %s\n"
msgstr "錯誤：連線無效：%s\n"

#: ../cli/src/connections.c:7051
#, c-format
msgid "Error: Cannot activate connection: %s.\n"
msgstr "錯誤：無法啟用連線：%s。\n"

#: ../cli/src/connections.c:7061
#, c-format
msgid "Error: Failed to activate '%s' (%s) connection: (%d) %s\n"
msgstr "錯誤：啟用「%s」(%s) 連線失敗：(%d) %s\n"

#: ../cli/src/connections.c:7067
#, c-format
msgid "Monitoring connection activation (press any key to continue)\n"
msgstr "監控連線啟用（按下任何鍵以繼續進行）\n"

#: ../cli/src/connections.c:7105
#, c-format
msgid "Error: status-line: %s\n"
msgstr "錯誤：status-line：%s\n"

#: ../cli/src/connections.c:7113
#, c-format
msgid "Error: save-confirmation: %s\n"
msgstr "錯誤：save-confirmation：%s\n"

#: ../cli/src/connections.c:7121
#, c-format
msgid "Error: bad color number: '%s'; use <0-8>\n"
msgstr "錯誤：顏色數字錯誤：「%s」；使用 <0-8>\n"

#: ../cli/src/connections.c:7133
#, c-format
msgid "Current nmcli configuration:\n"
msgstr "目前的 nmcli 配置：\n"

#: ../cli/src/connections.c:7141
#, c-format
msgid "Invalid configuration option '%s'; allowed [%s]\n"
msgstr "無效的配置選項「%s」；允許「%s」\n"

#: ../cli/src/connections.c:7364
#, c-format
msgid ""
">>> Command-line editing is not available. Consider installing a line "
"editing library to enable the feature. <<<\n"
"Supported libraries are:\n"
"  - GNU Readline    (libreadline) http://cnswww.cns.cwru.edu/php/chet/"
"readline/rltop.html\n"
"  - NetBSD Editline (libedit)     http://www.thrysoee.dk/editline/\n"
msgstr ""
">>> 無法使用指令列編輯。請考慮安裝一項行列編輯函式庫，以啟用這項功能。<<<\n"
"支援的函式庫有：\n"
"  - GNU Readline    (libreadline) http://cnswww.cns.cwru.edu/php/chet/"
"readline/rltop.html\n"
"  - NetBSD Editline (libedit)     http://www.thrysoee.dk/editline/\n"

#: ../cli/src/connections.c:7390
#, c-format
msgid "Error: only one of 'id', uuid, or 'path' can be provided."
msgstr "錯誤：只能提供「id」、uuid 或是「path」其中一項。"

#: ../cli/src/connections.c:7402 ../cli/src/connections.c:7599
#, c-format
msgid "Error: Unknown connection '%s'."
msgstr "錯誤：不明的連線「%s」。"

#: ../cli/src/connections.c:7417
#, c-format
msgid "Warning: editing existing connection '%s'; 'type' argument is ignored\n"
msgstr "警告：正要編輯既有的連線「%s」；「type」引數已忽略\n"

#: ../cli/src/connections.c:7420
#, c-format
msgid ""
"Warning: editing existing connection '%s'; 'con-name' argument is ignored\n"
msgstr "警告：正要編輯既有的連線「%s」；「con-name」引數已忽略\n"

#: ../cli/src/connections.c:7434
#, c-format
msgid "Valid connection types: %s\n"
msgstr "有效的連線類型：%s\n"

#: ../cli/src/connections.c:7436
#, c-format
msgid "Error: invalid connection type; %s\n"
msgstr "錯誤：無效的連線類型；%s\n"

#: ../cli/src/connections.c:7472
#, c-format
msgid "===| nmcli interactive connection editor |==="
msgstr "===| nmcli 互動式連線編輯程式 |==="

#: ../cli/src/connections.c:7475
#, c-format
msgid "Editing existing '%s' connection: '%s'"
msgstr "編輯既有的「%s」連線：「%s」"

#: ../cli/src/connections.c:7477
#, c-format
msgid "Adding a new '%s' connection"
msgstr "新增一項「%s」連線"

#: ../cli/src/connections.c:7479
#, c-format
msgid "Type 'help' or '?' for available commands."
msgstr "輸入「help」或是「?」以取得可用指令。"

#: ../cli/src/connections.c:7481
#, c-format
msgid "Type 'describe [<setting>.<prop>]' for detailed property description."
msgstr "輸入「describe [<setting>.<prop>]」以取得詳細的內容描述。"

#: ../cli/src/connections.c:7520
#, c-format
msgid "Error: Failed to modify connection '%s': (%d) %s"
msgstr "錯誤：修改連線「%s」失敗：(%d) %s"

#: ../cli/src/connections.c:7526
#, c-format
msgid "Connection '%s' (%s) successfully modified.\n"
msgstr "連線「%s」(%s) 已成功修改。\n"

#: ../cli/src/connections.c:7553
#, c-format
msgid "Error: No arguments provided."
msgstr "錯誤：未提供引數。"

#: ../cli/src/connections.c:7577
#, c-format
msgid "Error: connection ID is missing."
msgstr "錯誤：連線 ID 遺失。"

#: ../cli/src/connections.c:7582
#, c-format
msgid "Error: <setting>.<property> argument is missing."
msgstr "錯誤：<setting>.<property> 引數遺失。"

#: ../cli/src/connections.c:7605
#, c-format
msgid "Error: invalid <setting>.<property> '%s'."
msgstr "錯誤：無效的 <setting>.<property> '%s'。"

#: ../cli/src/connections.c:7620
#, c-format
msgid "Error: invalid or not allowed setting '%s': %s."
msgstr "錯誤：設定「%s」無效或不被允許：%s。"

#: ../cli/src/connections.c:7641
#, c-format
msgid "Error: invalid property '%s': %s."
msgstr "錯誤：無效的內容「%s」：%s。"

#: ../cli/src/connections.c:7647
#, c-format
msgid "Error: failed to modify %s.%s: %s."
msgstr "錯誤：無法修改 %s.%s：%s。"

#: ../cli/src/connections.c:7677
#, c-format
msgid "Error: Connection deletion failed: %s"
msgstr "錯誤：連線刪除失敗：%s"

#: ../cli/src/connections.c:7747
#, c-format
msgid "Error: unknown connection: %s\n"
msgstr "錯誤：不明的連線：%s\n"

#: ../cli/src/connections.c:7781
#, c-format
msgid "Error: cannot delete unknown connection(s): %s."
msgstr "錯誤：無法刪除不明的連線：%s。"

#: ../cli/src/connections.c:7852
#, c-format
msgid "Could not load file '%s'\n"
msgstr "無法載入檔案「%s」\n"

#: ../cli/src/connections.c:7917
#, c-format
msgid ""
"Error: 'configured' or 'active' command is expected for 'connection show'."
msgstr "錯誤：「connection show」預期「configured」或是「active」指令。"

#: ../cli/src/connections.c:7984
#, c-format
msgid "Error: '%s' is not valid 'connection' command."
msgstr "錯誤：「%s」不是個有效的「connection」指令。"

#: ../cli/src/connections.c:8053 ../cli/src/network-manager.c:615
#, c-format
msgid "Error: Could not get system settings."
msgstr "錯誤：無法取得系統設定。"

#: ../cli/src/connections.c:8063
#, c-format
msgid "Error: Can't obtain connections: settings service is not running."
msgstr "錯誤：無法取得連線：設定服務尚未執行。"

#: ../cli/src/devices.c:71 ../cli/src/devices.c:87 ../cli/src/devices.c:184
#: ../cli/src/devices.c:201
msgid "DEVICE"
msgstr "DEVICE"

#: ../cli/src/devices.c:75 ../cli/src/devices.c:103
msgid "CONNECTION"
msgstr "CONNECTION"

#: ../cli/src/devices.c:76 ../cli/src/devices.c:104
msgid "CON-UUID"
msgstr "CON-UUID"

#: ../cli/src/devices.c:89
msgid "VENDOR"
msgstr "VENDOR"

#: ../cli/src/devices.c:90
msgid "PRODUCT"
msgstr "PRODUCT"

#: ../cli/src/devices.c:91
msgid "DRIVER"
msgstr "DRIVER"

#: ../cli/src/devices.c:92
msgid "DRIVER-VERSION"
msgstr "DRIVER-VERSION"

#: ../cli/src/devices.c:93
msgid "FIRMWARE-VERSION"
msgstr "FIRMWARE-VERSION"

#: ../cli/src/devices.c:94
msgid "HWADDR"
msgstr "HWADDR"

#: ../cli/src/devices.c:95 ../tui/nmt-page-ethernet.c:86
#: ../tui/nmt-page-infiniband.c:90 ../tui/nmt-page-vlan.c:138
#: ../tui/nmt-page-wifi.c:364
msgid "MTU"
msgstr "MTU"

#: ../cli/src/devices.c:97
msgid "REASON"
msgstr "REASON"

#: ../cli/src/devices.c:98
msgid "UDI"
msgstr "UDI"

#: ../cli/src/devices.c:99
msgid "IP-IFACE"
msgstr "IP-IFACE"

#: ../cli/src/devices.c:100
msgid "NM-MANAGED"
msgstr "NM-MANAGED"

#: ../cli/src/devices.c:102
msgid "FIRMWARE-MISSING"
msgstr "FIRMWARE-MISSING"

#: ../cli/src/devices.c:115
msgid "AVAILABLE-CONNECTION-PATHS"
msgstr "AVAILABLE-CONNECTION-PATHS"

#: ../cli/src/devices.c:116
msgid "AVAILABLE-CONNECTIONS"
msgstr "AVAILABLE-CONNECTIONS"

#: ../cli/src/devices.c:125
msgid "CARRIER-DETECT"
msgstr "CARRIER-DETECT"

#: ../cli/src/devices.c:126
msgid "SPEED"
msgstr "SPEED"

#: ../cli/src/devices.c:135
msgid "CARRIER"
msgstr "CARRIER"

#: ../cli/src/devices.c:144 ../cli/src/devices.c:563
msgid "WEP"
msgstr "WEP"

#: ../cli/src/devices.c:145
msgid "WPA"
msgstr "WPA"

#: ../cli/src/devices.c:146 ../cli/src/devices.c:571
msgid "WPA2"
msgstr "WPA2"

#: ../cli/src/devices.c:147
msgid "TKIP"
msgstr "TKIP"

#: ../cli/src/devices.c:148
msgid "CCMP"
msgstr "CCMP"

#: ../cli/src/devices.c:149 ../cli/src/devices.c:239
msgid "AP"
msgstr "AP"

#: ../cli/src/devices.c:150
msgid "ADHOC"
msgstr "ADHOC"

#: ../cli/src/devices.c:159
msgid "CTR-FREQ"
msgstr "CTR-FREQ"

#: ../cli/src/devices.c:160
msgid "RSSI"
msgstr "RSSI"

#: ../cli/src/devices.c:161
msgid "CINR"
msgstr "CINR"

#: ../cli/src/devices.c:162
msgid "TX-POW"
msgstr "TX-POW"

#: ../cli/src/devices.c:163
msgid "BSID"
msgstr "BSID"

#: ../cli/src/devices.c:172 ../tui/nmt-page-wifi.c:221
msgid "SSID"
msgstr "SSID"

#: ../cli/src/devices.c:173
msgid "SSID-HEX"
msgstr "SSID-HEX"

#: ../cli/src/devices.c:174 ../tui/nmt-page-wifi.c:352
msgid "BSSID"
msgstr "BSSID"

#: ../cli/src/devices.c:175
msgid "MODE"
msgstr "MODE"

#: ../cli/src/devices.c:176
msgid "CHAN"
msgstr "CHAN"

#: ../cli/src/devices.c:177
msgid "FREQ"
msgstr "FREQ"

#: ../cli/src/devices.c:178
msgid "RATE"
msgstr "RATE"

#: ../cli/src/devices.c:179 ../cli/src/devices.c:199
msgid "SIGNAL"
msgstr "SIGNAL"

#: ../cli/src/devices.c:180
msgid "BARS"
msgstr "BARS"

#: ../cli/src/devices.c:181
msgid "SECURITY"
msgstr "SECURITY"

#: ../cli/src/devices.c:182
msgid "WPA-FLAGS"
msgstr "WPA-FLAGS"

#: ../cli/src/devices.c:183
msgid "RSN-FLAGS"
msgstr "RSN-FLAGS"

#: ../cli/src/devices.c:185 ../cli/src/devices.c:202
msgid "ACTIVE"
msgstr "ACTIVE"

#: ../cli/src/devices.c:186
msgid "*"
msgstr "*"

#: ../cli/src/devices.c:198 ../cli/src/devices.c:242
msgid "NSP"
msgstr "NSP"

#: ../cli/src/devices.c:213
msgid "SLAVES"
msgstr "SLAVES"

#: ../cli/src/devices.c:222
msgid "ID"
msgstr "ID"

#: ../cli/src/devices.c:237
msgid "CAPABILITIES"
msgstr "CAPABILITIES"

#: ../cli/src/devices.c:238
msgid "WIFI-PROPERTIES"
msgstr "WIFI-PROPERTIES"

#: ../cli/src/devices.c:240
msgid "WIRED-PROPERTIES"
msgstr "WIRED-PROPERTIES"

#: ../cli/src/devices.c:241
msgid "WIMAX-PROPERTIES"
msgstr "WIMAX-PROPERTIES"

#: ../cli/src/devices.c:247 ../tui/nmt-page-bond.c:73
msgid "BOND"
msgstr "BOND"

#: ../cli/src/devices.c:248 ../tui/nm-editor-utils.c:227
#: ../tui/nm-ui-utils.c:355 ../tui/nm-ui-utils.c:580 ../tui/nmt-page-vlan.c:53
msgid "VLAN"
msgstr "VLAN"

#: ../cli/src/devices.c:249
msgid "CONNECTIONS"
msgstr "CONNECTIONS"

#: ../cli/src/devices.c:274
#, c-format
msgid ""
"Usage: nmcli device { COMMAND | help }\n"
"\n"
"COMMAND := { status | show | connect | disconnect | wifi | wimax }\n"
"\n"
"COMMAND := { status | show | connect | disconnect | wifi }\n"
"\n"
"  status\n"
"\n"
"  show [<ifname>]\n"
"\n"
"  connect <ifname>\n"
"\n"
"  disconnect <ifname>\n"
"\n"
"  wifi [list [ifname <ifname>] [bssid <BSSID>]]\n"
"\n"
"  wifi connect <(B)SSID> [password <password>] [wep-key-type key|phrase] "
"[ifname <ifname>]\n"
"                         [bssid <BSSID>] [name <name>] [private yes|no]\n"
"\n"
"  wifi rescan [[ifname] <ifname>]\n"
"\n"
"  wimax [list [ifname <ifname>] [nsp <name>]]\n"
"\n"
msgstr ""
"Usage: nmcli device { COMMAND | help }\n"
"\n"
"COMMAND := { status | show | connect | disconnect | wifi | wimax }\n"
"\n"
"COMMAND := { status | show | connect | disconnect | wifi }\n"
"\n"
"  status\n"
"\n"
"  show [<ifname>]\n"
"\n"
"  connect <ifname>\n"
"\n"
"  disconnect <ifname>\n"
"\n"
"  wifi [list [ifname <ifname>] [bssid <BSSID>]]\n"
"\n"
"  wifi connect <(B)SSID> [password <password>] [wep-key-type key|phrase] "
"[ifname <ifname>]\n"
"                         [bssid <BSSID>] [name <name>] [private yes|no]\n"
"\n"
"  wifi rescan [[ifname] <ifname>]\n"
"\n"
"  wimax [list [ifname <ifname>] [nsp <name>]]\n"
"\n"

#: ../cli/src/devices.c:298
#, c-format
msgid ""
"Usage: nmcli device status { help }\n"
"\n"
"Show status for all devices.\n"
"By default, the following columns are shown:\n"
" DEVICE     - interface name\n"
" TYPE       - device type\n"
" STATE      - device state\n"
" CONNECTION - connection activated on device (if any)\n"
"Displayed columns can be changed using '--fields' global option. 'status' is\n"
"the default command, which means 'nmcli device' calls 'nmcli device status'.\n"
"\n"
msgstr ""
"Usage: nmcli device status { help }\n"
"\n"
"Show status for all devices.\n"
"By default, the following columns are shown:\n"
" DEVICE     - interface name\n"
" TYPE       - device type\n"
" STATE      - device state\n"
" CONNECTION - connection activated on device (if any)\n"
"Displayed columns can be changed using '--fields' global option. 'status' is\n"
"the default command, which means 'nmcli device' calls 'nmcli device status'.\n"
"\n"

#: ../cli/src/devices.c:314
#, c-format
msgid ""
"Usage: nmcli device show { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<ifname>]\n"
"\n"
"Show details of device(s).\n"
"The command lists details for all devices, or for a given device.\n"
"\n"
msgstr ""
"Usage: nmcli device show { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<ifname>]\n"
"\n"
"Show details of device(s).\n"
"The command lists details for all devices, or for a given device.\n"
"\n"

#: ../cli/src/devices.c:326
#, c-format
msgid ""
"Usage: nmcli device connect { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname>\n"
"\n"
"Connect the device.\n"
"NetworkManager will try to find a suitable connection that will be activated."
"\n"
"It will also consider connections that are not set to auto-connect.\n"
"\n"
msgstr ""
"Usage: nmcli device connect { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname>\n"
"\n"
"Connect the device.\n"
"NetworkManager will try to find a suitable connection that will be activated."
"\n"
"It will also consider connections that are not set to auto-connect.\n"
"\n"

#: ../cli/src/devices.c:339
#, c-format
msgid ""
"Usage: nmcli device disconnect { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname>\n"
"\n"
"Disconnect the device.\n"
"The command disconnects the device and prevents it from auto-activating\n"
"further connections without user/manual intervention.\n"
"\n"
msgstr ""
"Usage: nmcli device disconnect { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := <ifname>\n"
"\n"
"Disconnect the device.\n"
"The command disconnects the device and prevents it from auto-activating\n"
"further connections without user/manual intervention.\n"
"\n"

#: ../cli/src/devices.c:352
#, c-format
msgid ""
"Usage: nmcli device wifi { ARGUMENTS | help }\n"
"\n"
"Perform operation on Wi-Fi devices.\n"
"\n"
"ARGUMENTS := [list [ifname <ifname>] [bssid <BSSID>]]\n"
"\n"
"List available Wi-Fi access points. The 'ifname' and 'bssid' options can be\n"
"used to list APs for a particular interface, or with a specific BSSID.\n"
"\n"
"ARGUMENTS := connect <(B)SSID> [password <password>] [wep-key-type "
"key|phrase] [ifname <ifname>]\n"
"                    [bssid <BSSID>] [name <name>] [private yes|no]\n"
"\n"
"Connect to a Wi-Fi network specified by SSID or BSSID. The command creates\n"
"a new connection and then activates it on a device. This is a command-line\n"
"counterpart of clicking an SSID in a GUI client. The command always creates\n"
"a new connection and thus it is mainly useful for connecting to new Wi-Fi\n"
"networks. If a connection for the network already exists, it is better to\n"
"bring up the existing profile as follows: nmcli con up id <name>. Note that\n"
"only open, WEP and WPA-PSK networks are supported at the moment. It is also\n"
"assumed that IP configuration is obtained via DHCP.\n"
"\n"
"ARGUMENTS := rescan [[ifname] <ifname>]\n"
"\n"
"Request that NetworkManager immediately re-scan for available access points.\n"
"NetworkManager scans Wi-Fi networks periodically, but in some cases it might\n"
"be useful to start scanning manually. Note that this command does not show\n"
"the APs, use 'nmcli device wifi list' for that.\n"
"\n"
msgstr ""
"Usage: nmcli device wifi { ARGUMENTS | help }\n"
"\n"
"Perform operation on Wi-Fi devices.\n"
"\n"
"ARGUMENTS := [list [ifname <ifname>] [bssid <BSSID>]]\n"
"\n"
"List available Wi-Fi access points. The 'ifname' and 'bssid' options can be\n"
"used to list APs for a particular interface, or with a specific BSSID.\n"
"\n"
"ARGUMENTS := connect <(B)SSID> [password <password>] [wep-key-type "
"key|phrase] [ifname <ifname>]\n"
"                    [bssid <BSSID>] [name <name>] [private yes|no]\n"
"\n"
"Connect to a Wi-Fi network specified by SSID or BSSID. The command creates\n"
"a new connection and then activates it on a device. This is a command-line\n"
"counterpart of clicking an SSID in a GUI client. The command always creates\n"
"a new connection and thus it is mainly useful for connecting to new Wi-Fi\n"
"networks. If a connection for the network already exists, it is better to\n"
"bring up the existing profile as follows: nmcli con up id <name>. Note that\n"
"only open, WEP and WPA-PSK networks are supported at the moment. It is also\n"
"assumed that IP configuration is obtained via DHCP.\n"
"\n"
"ARGUMENTS := rescan [[ifname] <ifname>]\n"
"\n"
"Request that NetworkManager immediately re-scan for available access points.\n"
"NetworkManager scans Wi-Fi networks periodically, but in some cases it might\n"
"be useful to start scanning manually. Note that this command does not show\n"
"the APs, use 'nmcli device wifi list' for that.\n"
"\n"

#: ../cli/src/devices.c:386
#, c-format
msgid ""
"Usage: nmcli device wimax { ARGUMENTS | help }\n"
"\n"
"Perform operation on WiMAX devices.\n"
"\n"
"ARGUMENTS := [list [ifname <ifname>] [nsp <name>]]\n"
"\n"
"List available WiMAX NSPs. The 'ifname' and 'nsp' options can be used to\n"
"list networks for a particular interface, or with a specific NSP.\n"
"\n"
msgstr ""
"Usage: nmcli device wimax { ARGUMENTS | help }\n"
"\n"
"Perform operation on WiMAX devices.\n"
"\n"
"ARGUMENTS := [list [ifname <ifname>] [nsp <name>]]\n"
"\n"
"List available WiMAX NSPs. The 'ifname' and 'nsp' options can be used to\n"
"list networks for a particular interface, or with a specific NSP.\n"
"\n"

#: ../cli/src/devices.c:480
msgid "(none)"
msgstr "(none)"

#: ../cli/src/devices.c:547
#, c-format
msgid "%u MHz"
msgstr "%u MHz"

#: ../cli/src/devices.c:548
#, c-format
msgid "%u Mbit/s"
msgstr "%u Mbit/s"

#: ../cli/src/devices.c:567
msgid "WPA1"
msgstr "WPA1"

#: ../cli/src/devices.c:576
msgid "802.1X"
msgstr "802.1X"

#: ../cli/src/devices.c:592
msgid "Ad-Hoc"
msgstr "Ad-Hoc"

#: ../cli/src/devices.c:593
msgid "Infra"
msgstr "Infra"

#: ../cli/src/devices.c:625
msgid "Home"
msgstr "Home"

#: ../cli/src/devices.c:628
msgid "Partner"
msgstr "Partner"

#: ../cli/src/devices.c:631
msgid "Roaming"
msgstr "Roaming"

#: ../cli/src/devices.c:725
msgid "Device details"
msgstr "裝置詳細資訊"

#: ../cli/src/devices.c:737
#, c-format
msgid "Error: 'device show': %s"
msgstr "錯誤：「device show」：%s"

#: ../cli/src/devices.c:787 ../cli/src/devices.c:790 ../cli/src/devices.c:1334
#: ../cli/src/devices.c:1474
msgid "(unknown)"
msgstr "(不明)"

#: ../cli/src/devices.c:827
#, c-format
msgid "%u Mb/s"
msgstr "%u Mb/s"

#: ../cli/src/devices.c:913
msgid "on"
msgstr "開"

#: ../cli/src/devices.c:913
msgid "off"
msgstr "關"

#: ../cli/src/devices.c:1188
#, c-format
msgid "Error: 'device status': %s"
msgstr "錯誤：「device status」：%s"

#: ../cli/src/devices.c:1206
msgid "Status of devices"
msgstr "裝置的狀態"

#: ../cli/src/devices.c:1237
#, c-format
msgid "Error: invalid extra argument '%s'."
msgstr "錯誤：無效的額外引數「%s」。"

#: ../cli/src/devices.c:1265 ../cli/src/devices.c:1422
#: ../cli/src/devices.c:1557 ../cli/src/devices.c:1696
#: ../cli/src/devices.c:2436
#, c-format
msgid "Error: Device '%s' not found."
msgstr "錯誤：找不到「%s」裝置。"

#: ../cli/src/devices.c:1319
#, c-format
msgid "Success: Device '%s' successfully activated."
msgstr "成功：裝置「%s」已成功啟用。"

#: ../cli/src/devices.c:1333
#, c-format
msgid "Error: Device activation failed: %s"
msgstr "錯誤：裝置啟用失敗：%s"

#: ../cli/src/devices.c:1350
#, c-format
msgid "Device '%s' has been connected.\n"
msgstr "裝置「%s」已連上。\n"

#: ../cli/src/devices.c:1377 ../cli/src/devices.c:1512
msgid "Interface: "
msgstr "介面卡："

#: ../cli/src/devices.c:1381 ../cli/src/devices.c:1390
#: ../cli/src/devices.c:1516 ../cli/src/devices.c:1525
#, c-format
msgid "Error: No interface specified."
msgstr "錯誤：尚未指定介面卡。"

#: ../cli/src/devices.c:1396 ../cli/src/devices.c:1531
#, c-format
msgid "Error: extra argument not allowed: '%s'."
msgstr "錯誤：不允許額外的引數：「%s」。"

#: ../cli/src/devices.c:1459
#, c-format
msgid "Success: Device '%s' successfully disconnected."
msgstr "成功：裝置「%s」已經成功地斷線。"

#: ../cli/src/devices.c:1471
#, c-format
msgid "Error: Device '%s' (%s) disconnecting failed: %s"
msgstr "錯誤：裝置「%s」（%s）斷線失敗：%s"

#: ../cli/src/devices.c:1485
#, c-format
msgid "Device '%s' has been disconnected.\n"
msgstr "裝置「%s」已斷線。\n"

#: ../cli/src/devices.c:1628
msgid "Wi-Fi scan list"
msgstr "Wi-Fi 掃描清單"

#: ../cli/src/devices.c:1666
#, c-format
msgid "Error: 'device wifi': %s"
msgstr "錯誤：「device wifi」：%s"

#: ../cli/src/devices.c:1719 ../cli/src/devices.c:1788
#, c-format
msgid "Error: Access point with bssid '%s' not found."
msgstr "錯誤：找不到 bssid 爲「%s」的存取點。"

#: ../cli/src/devices.c:1743 ../cli/src/devices.c:2131
#: ../cli/src/devices.c:2293
#, c-format
msgid "Error: Device '%s' is not a Wi-Fi device."
msgstr "錯誤：裝置「%s」不是個 Wi-Fi 裝置。"

#: ../cli/src/devices.c:1825 ../cli/src/devices.c:1872
#, c-format
msgid "Connection with UUID '%s' created and activated on device '%s'\n"
msgstr "UUID 爲「%s」的連線已建立並啟用於「%s」裝置上\n"

#: ../cli/src/devices.c:1829
#, c-format
msgid "Error: Connection activation failed: (%d) %s."
msgstr "錯誤：連線啟用失敗：(%d) %s。"

#: ../cli/src/devices.c:1854
#, c-format
msgid "Error: Failed to add/activate new connection: (%d) %s"
msgstr "錯誤：新增/啟用新連線失敗：(%d) %s"

#: ../cli/src/devices.c:1862
#, c-format
msgid "Error: Failed to add/activate new connection: Unknown error"
msgstr "錯誤：新增/啟用新連線失敗：不明的錯誤"

#: ../cli/src/devices.c:2013
msgid "SSID or BSSID: "
msgstr "SSID 或 BSSID："

#: ../cli/src/devices.c:2018
#, c-format
msgid "Error: SSID or BSSID are missing."
msgstr "錯誤：SSID 或 BSSID 遺失。"

#: ../cli/src/devices.c:2042
#, c-format
msgid "Error: bssid argument value '%s' is not a valid BSSID."
msgstr "錯誤：bssid 引數值「%s」不是個有效的 BSSID。"

#: ../cli/src/devices.c:2066
#, c-format
msgid ""
"Error: wep-key-type argument value '%s' is invalid, use 'key' or 'phrase'."
msgstr "錯誤：wep-key-type 引數值「%s」無效，請使用「key」或是「phrase」。"

#: ../cli/src/devices.c:2086
#, c-format
msgid "Error: %s: %s."
msgstr "錯誤：%s：%s。"

#: ../cli/src/devices.c:2101
#, c-format
msgid "Error: BSSID to connect to (%s) differs from bssid argument (%s)."
msgstr "錯誤：欲連上的 BSSID（%s）與 bssid 引數（%s）不同。"

#: ../cli/src/devices.c:2107
#, c-format
msgid "Error: Parameter '%s' is neither SSID nor BSSID."
msgstr "錯誤：參數「%s」既不是 SSID 也不是 BSSID。"

#: ../cli/src/devices.c:2133 ../cli/src/devices.c:2295
#, c-format
msgid "Error: No Wi-Fi device found."
msgstr "錯誤：找不到 Wi-Fi 裝置。"

#: ../cli/src/devices.c:2151
#, c-format
msgid "Error: No network with SSID '%s' found."
msgstr "錯誤：找不到 SSID 爲「%s」的網路。"

#: ../cli/src/devices.c:2153
#, c-format
msgid "Error: No access point with BSSID '%s' found."
msgstr "錯誤：找不到 BSSID 爲「%s」的存取點。"

#: ../cli/src/devices.c:2192
msgid "Password: "
msgstr "密碼："

#: ../cli/src/devices.c:2321
#, c-format
msgid "Error: 'device wifi' command '%s' is not valid."
msgstr "錯誤：「device wifi」指令「%s」無效。"

#: ../cli/src/devices.c:2368
msgid "WiMAX NSP list"
msgstr "WiMAX NSP 清單"

#: ../cli/src/devices.c:2405
#, c-format
msgid "Error: 'device wimax': %s"
msgstr "錯誤：「device wimax」：%s"

#: ../cli/src/devices.c:2459
#, c-format
msgid "Error: NSP with name '%s' not found."
msgstr "錯誤：找不到名稱爲「%s」的 NSP。"

#: ../cli/src/devices.c:2472
#, c-format
msgid "Error: Device '%s' is not a WiMAX device."
msgstr "錯誤：裝置「%s」不是個 WiMAX 裝置。"

#: ../cli/src/devices.c:2510
#, c-format
msgid "Error: Access point with nsp '%s' not found."
msgstr "錯誤：找不到 nsp 爲「%s」的存取點。"

#: ../cli/src/devices.c:2542
#, c-format
msgid "Error: 'device wimax' command '%s' is not valid."
msgstr "錯誤：「device wimax」指令「%s」無效。"

#: ../cli/src/devices.c:2621
#, c-format
msgid "Error: 'dev' command '%s' is not valid."
msgstr "錯誤：「dev」指令「%s」不合乎規定。"

#: ../cli/src/network-manager.c:37
msgid "RUNNING"
msgstr "RUNNING"

#: ../cli/src/network-manager.c:38
msgid "VERSION"
msgstr "VERSION"

#: ../cli/src/network-manager.c:40
msgid "STARTUP"
msgstr "STARTUP"

#: ../cli/src/network-manager.c:41
msgid "CONNECTIVITY"
msgstr "CONNECTIVITY"

#: ../cli/src/network-manager.c:42
msgid "NETWORKING"
msgstr "NETWORKING"

#: ../cli/src/network-manager.c:43
msgid "WIFI-HW"
msgstr "WIFI-HW"

#: ../cli/src/network-manager.c:44
msgid "WIFI"
msgstr "WIFI-HARDWARE"

#: ../cli/src/network-manager.c:45
msgid "WWAN-HW"
msgstr "WWAN-HW"

#: ../cli/src/network-manager.c:46
msgid "WWAN"
msgstr "WWAN"

#: ../cli/src/network-manager.c:47
msgid "WIMAX-HW"
msgstr "WIMAX-HW"

#: ../cli/src/network-manager.c:48
msgid "WIMAX"
msgstr "WIMAX"

#: ../cli/src/network-manager.c:70
msgid "PERMISSION"
msgstr "PERMISSION"

#: ../cli/src/network-manager.c:71
msgid "VALUE"
msgstr "VALUE"

#: ../cli/src/network-manager.c:79
msgid "LEVEL"
msgstr "LEVEL"

#: ../cli/src/network-manager.c:80
msgid "DOMAINS"
msgstr "DOMAINS"

#: ../cli/src/network-manager.c:95
#, c-format
msgid ""
"Usage: nmcli general { COMMAND | help }\n"
"\n"
"COMMAND := { status | hostname | permissions | logging }\n"
"\n"
"  status\n"
"\n"
"  hostname [<hostname>]\n"
"\n"
"  permissions\n"
"\n"
"  logging [level <log level>] [domains <log domains>]\n"
"\n"
msgstr ""
"Usage: nmcli general { COMMAND | help }\n"
"\n"
"COMMAND := { status | hostname | permissions | logging }\n"
"\n"
"  status\n"
"\n"
"  hostname [<hostname>]\n"
"\n"
"  permissions\n"
"\n"
"  logging [level <log level>] [domains <log domains>]\n"
"\n"

#: ../cli/src/network-manager.c:107
#, c-format
msgid ""
"Usage: nmcli general status { help }\n"
"\n"
"Show overall status of NetworkManager.\n"
"'status' is the default action, which means 'nmcli gen' calls 'nmcli gen "
"status'\n"
"\n"
msgstr ""
"Usage: nmcli general status { help }\n"
"\n"
"Show overall status of NetworkManager.\n"
"'status' is the default action, which means 'nmcli gen' calls 'nmcli gen "
"status'\n"
"\n"

#: ../cli/src/network-manager.c:117
#, c-format
msgid ""
"Usage: nmcli general hostname { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<hostname>]\n"
"\n"
"Get or change persistent system hostname.\n"
"With no arguments, this prints currently configured hostname. When you pass\n"
"a hostname, NetworkManager will set it as the new persistent system hostname."
"\n"
"\n"
msgstr ""
"Usage: nmcli general hostname { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [<hostname>]\n"
"\n"
"Get or change persistent system hostname.\n"
"With no arguments, this prints currently configured hostname. When you pass\n"
"a hostname, NetworkManager will set it as the new persistent system hostname."
"\n"
"\n"

#: ../cli/src/network-manager.c:130
#, c-format
msgid ""
"Usage: nmcli general permissions { help }\n"
"\n"
"Show caller permissions for authenticated operations.\n"
"\n"
msgstr ""
"Usage: nmcli general permissions { help }\n"
"\n"
"Show caller permissions for authenticated operations.\n"
"\n"

#: ../cli/src/network-manager.c:139
#, c-format
msgid ""
"Usage: nmcli general logging { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [level <log level>] [domains <log domains>]\n"
"\n"
"Get or change NetworkManager logging level and domains.\n"
"Without any argument current logging level and domains are shown. In order "
"to\n"
"change logging state, provide level and/or domain. Please refer to the man "
"page\n"
"for the list of possible logging domains.\n"
"\n"
msgstr ""
"Usage: nmcli general logging { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [level <log level>] [domains <log domains>]\n"
"\n"
"Get or change NetworkManager logging level and domains.\n"
"Without any argument current logging level and domains are shown. In order "
"to\n"
"change logging state, provide level and/or domain. Please refer to the man "
"page\n"
"for the list of possible logging domains.\n"
"\n"

#: ../cli/src/network-manager.c:153
#, c-format
msgid ""
"Usage: nmcli networking { COMMAND | help }\n"
"\n"
"COMMAND := { [ on | off | connectivity ] }\n"
"\n"
"  on\n"
"\n"
"  off\n"
"\n"
"  connectivity [check]\n"
"\n"
msgstr ""
"Usage: nmcli networking { COMMAND | help }\n"
"\n"
"COMMAND := { [ on | off | connectivity ] }\n"
"\n"
"  on\n"
"\n"
"  off\n"
"\n"
"  connectivity [check]\n"
"\n"

#: ../cli/src/network-manager.c:164
#, c-format
msgid "Usage: nmcli networking on { help }\n"
"\n"
"Switch networking on.\n"
"\n"
msgstr "Usage: nmcli networking on { help }\n"
"\n"
"Switch networking on.\n"
"\n"

#: ../cli/src/network-manager.c:173
#, c-format
msgid "Usage: nmcli networking off { help }\n"
"\n"
"Switch networking off.\n"
"\n"
msgstr "Usage: nmcli networking off { help }\n"
"\n"
"Switch networking off.\n"
"\n"

#: ../cli/src/network-manager.c:182
#, c-format
msgid ""
"Usage: nmcli networking connectivity { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [check]\n"
"\n"
"Get network connectivity state.\n"
"The optional 'check' argument makes NetworkManager re-check the connectivity."
"\n"
"\n"
msgstr ""
"Usage: nmcli networking connectivity { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [check]\n"
"\n"
"Get network connectivity state.\n"
"The optional 'check' argument makes NetworkManager re-check the connectivity."
"\n"
"\n"

#: ../cli/src/network-manager.c:195
#, c-format
msgid ""
"Usage: nmcli radio { COMMAND | help }\n"
"\n"
"COMMAND := { all | wifi | wwan | wimax }\n"
"\n"
"  all | wifi | wwan | wimax [ on | off ]\n"
"\n"
"COMMAND := { all | wifi | wwan }\n"
"\n"
"  all | wifi | wwan [ on | off ]\n"
"\n"
msgstr ""
"Usage: nmcli radio { COMMAND | help }\n"
"\n"
"COMMAND := { all | wifi | wwan | wimax }\n"
"\n"
"  all | wifi | wwan | wimax [ on | off ]\n"
"\n"
"COMMAND := { all | wifi | wwan }\n"
"\n"
"  all | wifi | wwan [ on | off ]\n"
"\n"

#: ../cli/src/network-manager.c:210
#, c-format
msgid ""
"Usage: nmcli radio all { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of all radio switches, or turn them on/off.\n"
"\n"
msgstr ""
"Usage: nmcli radio all { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of all radio switches, or turn them on/off.\n"
"\n"

#: ../cli/src/network-manager.c:221
#, c-format
msgid ""
"Usage: nmcli radio wifi { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of Wi-Fi radio switch, or turn it on/off.\n"
"\n"
msgstr ""
"Usage: nmcli radio wifi { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of Wi-Fi radio switch, or turn it on/off.\n"
"\n"

#: ../cli/src/network-manager.c:232
#, c-format
msgid ""
"Usage: nmcli radio wwan { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of mobile broadband radio switch, or turn it on/off.\n"
"\n"
msgstr ""
"Usage: nmcli radio wwan { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of mobile broadband radio switch, or turn it on/off.\n"
"\n"

#: ../cli/src/network-manager.c:244
#, c-format
msgid ""
"Usage: nmcli radio wimax { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of WiMAX radio switch, or turn it on/off.\n"
"\n"
msgstr ""
"Usage: nmcli radio wimax { ARGUMENTS | help }\n"
"\n"
"ARGUMENTS := [on | off]\n"
"\n"
"Get status of WiMAX radio switch, or turn it on/off.\n"
"\n"

#: ../cli/src/network-manager.c:264
msgid "asleep"
msgstr "睡眠中"

#: ../cli/src/network-manager.c:266
msgid "connecting"
msgstr "連線中"

#: ../cli/src/network-manager.c:268
msgid "connected (local only)"
msgstr "已連上（只有本機）"

#: ../cli/src/network-manager.c:270
msgid "connected (site only)"
msgstr "已連上（只有網站）"

#: ../cli/src/network-manager.c:274
msgid "disconnecting"
msgstr "正在切斷連線"

#: ../cli/src/network-manager.c:290
msgid "portal"
msgstr "入口網站"

#: ../cli/src/network-manager.c:292
msgid "limited"
msgstr "受限"

#: ../cli/src/network-manager.c:294
msgid "full"
msgstr "已滿"

#: ../cli/src/network-manager.c:332
#, c-format
msgid "Error: only these fields are allowed: %s"
msgstr "錯誤：只允許這些欄位：%s"

#: ../cli/src/network-manager.c:348 ../cli/src/network-manager.c:349
#: ../cli/src/network-manager.c:350 ../cli/src/network-manager.c:351
#: ../cli/src/network-manager.c:352 ../cli/src/network-manager.c:354
#: ../cli/src/network-manager.c:355
msgid "enabled"
msgstr "已啟用"

#: ../cli/src/network-manager.c:348 ../cli/src/network-manager.c:349
#: ../cli/src/network-manager.c:350 ../cli/src/network-manager.c:351
#: ../cli/src/network-manager.c:352 ../cli/src/network-manager.c:354
#: ../cli/src/network-manager.c:355
msgid "disabled"
msgstr "已停用"

#: ../cli/src/network-manager.c:367
msgid "NetworkManager status"
msgstr "NetworkManager 狀態"

#: ../cli/src/network-manager.c:372
msgid "running"
msgstr "執行中"

#: ../cli/src/network-manager.c:372
msgid "not running"
msgstr "非執行中"

#: ../cli/src/network-manager.c:375
msgid "starting"
msgstr "正在開始"

#: ../cli/src/network-manager.c:375
msgid "started"
msgstr "已開始"

#: ../cli/src/network-manager.c:446
msgid "auth"
msgstr "auth"

#: ../cli/src/network-manager.c:475
#, c-format
msgid "Error: 'general permissions': %s"
msgstr "錯誤：「general permissions」：%s"

#: ../cli/src/network-manager.c:489
msgid "NetworkManager permissions"
msgstr "NetworkManager 權限"

#: ../cli/src/network-manager.c:530
#, c-format
msgid "Error: 'general logging': %s"
msgstr "錯誤：「general logging」：%s"

#: ../cli/src/network-manager.c:545
msgid "NetworkManager logging"
msgstr "NetworkManager 日誌"

#: ../cli/src/network-manager.c:565
#, c-format
msgid "Error: failed to set hostname: (%d) %s"
msgstr "錯誤：無法設定主機名稱：(%d) %s"

#: ../cli/src/network-manager.c:682
#, c-format
msgid "Error: access denied to set logging; %s"
msgstr "錯誤：設置日誌的存取被拒絕；%s"

#: ../cli/src/network-manager.c:684
#, c-format
msgid "Error: %s"
msgstr "錯誤：%s"

#: ../cli/src/network-manager.c:692
#, c-format
msgid "Error: 'general' command '%s' is not valid."
msgstr "錯誤：「general」指令「%s」無效。"

#: ../cli/src/network-manager.c:710
#, c-format
msgid "Error: '--fields' value '%s' is not valid here (allowed field: %s)"
msgstr "錯誤：「--fields」值「%s」在此無效（允許的欄位：%s）"

#: ../cli/src/network-manager.c:735
#, c-format
msgid "Error: invalid '%s' argument: '%s' (use on/off)."
msgstr "錯誤：無效的「%s」引數：「%s」（請使用 on/off）。"

#: ../cli/src/network-manager.c:746
msgid "Connectivity"
msgstr "連線性"

#: ../cli/src/network-manager.c:758
msgid "Networking"
msgstr "網路作業"

#: ../cli/src/network-manager.c:783
#, c-format
msgid "Error: 'networking connectivity' command '%s' is not valid."
msgstr "錯誤：「network connectivity」指令「%s」無效。"

#: ../cli/src/network-manager.c:799
#, c-format
msgid "Error: 'networking' command '%s' is not valid."
msgstr "錯誤：「networking」指令「%s」無效。"

#: ../cli/src/network-manager.c:825 ../cli/src/network-manager.c:845
msgid "Radio switches"
msgstr "Radio 開關"

#: ../cli/src/network-manager.c:863
msgid "Wi-Fi radio switch"
msgstr "Wi-fi radio 開關"

#: ../cli/src/network-manager.c:879
msgid "WWAN radio switch"
msgstr "WWAN radio 開關"

#: ../cli/src/network-manager.c:896
msgid "WiMAX radio switch"
msgstr "WiMAX radio 開關"

#: ../cli/src/network-manager.c:908
#, c-format
msgid "Error: 'radio' command '%s' is not valid."
msgstr "錯誤：「radio」指令「%s」無效。"

#: ../cli/src/nmcli.c:78
#, c-format
msgid ""
"Usage: %s [OPTIONS] OBJECT { COMMAND | help }\n"
"\n"
"OPTIONS\n"
"  -t[erse]                                   terse output\n"
"  -p[retty]                                  pretty output\n"
"  -m[ode] tabular|multiline                  output mode\n"
"  -f[ields] <field1,field2,...>|all|common   specify fields to output\n"
"  -e[scape] yes|no                           escape columns separators in "
"values\n"
"  -n[ocheck]                                 don't check nmcli and "
"NetworkManager versions\n"
"  -a[sk]                                     ask for missing parameters\n"
"  -w[ait] <seconds>                          set timeout waiting for "
"finishing operations\n"
"  -v[ersion]                                 show program version\n"
"  -h[elp]                                    print this help\n"
"\n"
"OBJECT\n"
"  g[eneral]       NetworkManager's general status and operations\n"
"  n[etworking]    overall networking control\n"
"  r[adio]         NetworkManager radio switches\n"
"  c[onnection]    NetworkManager's connections\n"
"  d[evice]        devices managed by NetworkManager\n"
"\n"
msgstr ""
"使用方法：%s [OPTIONS] OBJECT { COMMAND | help }\n"
"\n"
"OPTIONS\n"
"  -t[erse]                                   terse output\n"
"  -p[retty]                                  pretty output\n"
"  -m[ode] tabular|multiline                  output mode\n"
"  -f[ields] <field1,field2,...>|all|common   specify fields to output\n"
"  -e[scape] yes|no                           escape columns separators in "
"values\n"
"  -n[ocheck]                                 don't check nmcli and "
"NetworkManager versions\n"
"  -a[sk]                                     ask for missing parameters\n"
"  -w[ait] <seconds>                          set timeout waiting for "
"finishing operations\n"
"  -v[ersion]                                 show program version\n"
"  -h[elp]                                    print this help\n"
"\n"
"OBJECT\n"
"  g[eneral]       NetworkManager's general status and operations\n"
"  n[etworking]    overall networking control\n"
"  r[adio]         NetworkManager radio switches\n"
"  c[onnection]    NetworkManager's connections\n"
"  d[evice]        devices managed by NetworkManager\n"
"\n"

#: ../cli/src/nmcli.c:132
#, c-format
msgid "Error: Object '%s' is unknown, try 'nmcli help'."
msgstr "錯誤：物件 '%s' 不明，請嘗試 'nmcli help'。"

#: ../cli/src/nmcli.c:162
#, c-format
msgid "Error: Option '--terse' is specified the second time."
msgstr "錯誤：選項 '--terse' 已指定了第二次。"

#: ../cli/src/nmcli.c:167
#, c-format
msgid "Error: Option '--terse' is mutually exclusive with '--pretty'."
msgstr "錯誤：選項 '--terse' 和 '--pretty' 是互斥的。"

#: ../cli/src/nmcli.c:175
#, c-format
msgid "Error: Option '--pretty' is specified the second time."
msgstr "錯誤：選項 '--pretty' 已指定了第二次。"

#: ../cli/src/nmcli.c:180
#, c-format
msgid "Error: Option '--pretty' is mutually exclusive with '--terse'."
msgstr "錯誤：選項 '--pretty' 和 '--terse' 是互斥的。"

#: ../cli/src/nmcli.c:190 ../cli/src/nmcli.c:206 ../cli/src/nmcli.c:235
#, c-format
msgid "Error: missing argument for '%s' option."
msgstr "錯誤：'%s' 選項的引數遺失。"

#: ../cli/src/nmcli.c:199 ../cli/src/nmcli.c:215
#, c-format
msgid "Error: '%s' is not valid argument for '%s' option."
msgstr "錯誤：'%s' 不是 '%s' 選項的有效引數。"

#: ../cli/src/nmcli.c:222
#, c-format
msgid "Error: fields for '%s' options are missing."
msgstr "錯誤：找不到 '%s' 選項的欄位。"

#: ../cli/src/nmcli.c:240
#, c-format
msgid "Error: '%s' is not a valid timeout for '%s' option."
msgstr "錯誤：「%s」不是「%s」選項的有效逾時值。"

#: ../cli/src/nmcli.c:247
#, c-format
msgid "nmcli tool, version %s\n"
msgstr "nmcli 工具，版本 %s\n"

#: ../cli/src/nmcli.c:253
#, c-format
msgid "Error: Option '%s' is unknown, try 'nmcli -help'."
msgstr "錯誤：選項 '%s' 不明，請嚐試 'nmcli -help'。"

#: ../cli/src/nmcli.c:288
#, c-format
msgid "\n"
"Error: nmcli terminated by signal %d."
msgstr "\n"
"錯誤：nmcli 已被訊號 %d 終止。"

#: ../cli/src/nmcli.c:318 ../src/main.c:130
#, c-format
msgid "Failed to set signal mask: %d"
msgstr "無法設置訊號遮罩：%d"

#: ../cli/src/nmcli.c:325 ../src/main.c:139
#, c-format
msgid "Failed to create signal handling thread: %d"
msgstr "無法建立訊號處理執行續：%d"

#: ../cli/src/nmcli.c:338 ../test/nm-online.c:149
#, c-format
msgid "Error: Could not create NMClient object."
msgstr "錯誤：無法建立 NMClient 物件。"

#: ../cli/src/nmcli.c:354
msgid "Success"
msgstr "成功"

#: ../cli/src/settings.c:666
#, c-format
msgid "%d (hex-ascii-key)"
msgstr "%d（十六進位的 ascii-key）"

#: ../cli/src/settings.c:668
#, c-format
msgid "%d (104/128-bit passphrase)"
msgstr "%d（104/128 位元密碼）"

#: ../cli/src/settings.c:671 ../cli/src/settings.c:799
#, c-format
msgid "%d (unknown)"
msgstr "%d（不明）"

#: ../cli/src/settings.c:697
msgid "0 (unknown)"
msgstr "0（不明）"

#: ../cli/src/settings.c:703
msgid "any, "
msgstr "任何，"

#: ../cli/src/settings.c:705
msgid "900 MHz, "
msgstr "900 MHz, "

#: ../cli/src/settings.c:707
msgid "1800 MHz, "
msgstr "1800 MHz, "

#: ../cli/src/settings.c:709
msgid "1900 MHz, "
msgstr "1900 MHz, "

#: ../cli/src/settings.c:711
msgid "850 MHz, "
msgstr "850 MHz, "

#: ../cli/src/settings.c:713
msgid "WCDMA 3GPP UMTS 2100 MHz, "
msgstr "WCDMA 3GPP UMTS 2100 MHz, "

#: ../cli/src/settings.c:715
msgid "WCDMA 3GPP UMTS 1800 MHz, "
msgstr "WCDMA 3GPP UMTS 1800 MHz, "

#: ../cli/src/settings.c:717
msgid "WCDMA 3GPP UMTS 1700/2100 MHz, "
msgstr "WCDMA 3GPP UMTS 1700/2100 MHz, "

#: ../cli/src/settings.c:719
msgid "WCDMA 3GPP UMTS 800 MHz, "
msgstr "WCDMA 3GPP UMTS 800 MHz, "

#: ../cli/src/settings.c:721
msgid "WCDMA 3GPP UMTS 850 MHz, "
msgstr "WCDMA 3GPP UMTS 850 MHz, "

#: ../cli/src/settings.c:723
msgid "WCDMA 3GPP UMTS 900 MHz, "
msgstr "WCDMA 3GPP UMTS 900 MHz, "

#: ../cli/src/settings.c:725
msgid "WCDMA 3GPP UMTS 1700 MHz, "
msgstr "WCDMA 3GPP UMTS 1700 MHz, "

#: ../cli/src/settings.c:727
msgid "WCDMA 3GPP UMTS 1900 MHz, "
msgstr "WCDMA 3GPP UMTS 1900 MHz, "

#: ../cli/src/settings.c:729
msgid "WCDMA 3GPP UMTS 2600 MHz, "
msgstr "WCDMA 3GPP UMTS 2600 MHz, "

#: ../cli/src/settings.c:747
msgid "0 (NONE)"
msgstr "0 (NONE)"

#: ../cli/src/settings.c:753
msgid "REORDER_HEADERS, "
msgstr "REORDER_HEADERS, "

#: ../cli/src/settings.c:755
msgid "GVRP, "
msgstr "GVRP, "

#: ../cli/src/settings.c:757
msgid "LOOSE_BINDING, "
msgstr "LOOSE_BINDING, "

#: ../cli/src/settings.c:793
#, c-format
msgid "%d (disabled)"
msgstr "%d (已停用)"

#: ../cli/src/settings.c:795
#, c-format
msgid "%d (enabled, prefer public IP)"
msgstr "%d (已啟用，建議使用公用 IP)"

#: ../cli/src/settings.c:797
#, c-format
msgid "%d (enabled, prefer temporary IP)"
msgstr "%d (已啟用，建議使用暫時性 IP)"

#: ../cli/src/settings.c:809
msgid "0 (none)"
msgstr "0 (none)"

#: ../cli/src/settings.c:815
msgid "agent-owned, "
msgstr "agent-owned, "

#: ../cli/src/settings.c:817
msgid "not saved, "
msgstr "not saved, "

#: ../cli/src/settings.c:819
msgid "not required, "
msgstr "not required, "

#: ../cli/src/settings.c:1124
msgid "0 (disabled)"
msgstr "0（已停用）"

#: ../cli/src/settings.c:1130
msgid "enabled, "
msgstr "enabled, "

#: ../cli/src/settings.c:1132
msgid "advertise, "
msgstr "advertise, "

#: ../cli/src/settings.c:1134
msgid "willing, "
msgstr "willing, "

#: ../cli/src/settings.c:1162
msgid "-1 (unset)"
msgstr "-1（反設定）"

#: ../cli/src/settings.c:1270 ../cli/src/settings.c:1453
#: ../cli/src/settings.c:1493
msgid "auto"
msgstr "auto"

#: ../cli/src/settings.c:1283
msgid "default"
msgstr "default"

#: ../cli/src/settings.c:1614
#, c-format
msgid "Do you also want to set '%s' to '%s'? [yes]: "
msgstr "您是否也希望將「%s」設為「%s」？[yes]："

#: ../cli/src/settings.c:1616
#, c-format
msgid "Do you also want to clear '%s'? [yes]: "
msgstr "您是否也希望清除「%s」？[yes]："

#: ../cli/src/settings.c:1814 ../cli/src/settings.c:2069
#: ../cli/src/settings.c:3673
#, c-format
msgid "'%s' is not valid"
msgstr "「%s」無效"

#: ../cli/src/settings.c:1837
#, c-format
msgid "'%d' is not valid; use <%d-%d>"
msgstr "「%d」無效；請使用 <%d-%d>"

#: ../cli/src/settings.c:1859
#, c-format
msgid "'%u' is not valid; use <%d-%d>"
msgstr "「%u」無效；請使用 <%d-%d>"

#: ../cli/src/settings.c:1925
#, c-format
msgid "'%s' is not valid; use <option>=<value>"
msgstr "「%s」無效；請使用 <option>=<value>"

#: ../cli/src/settings.c:1959
#, c-format
msgid "index '%s' is not valid"
msgstr "索引「%s」無效"

#: ../cli/src/settings.c:1964
msgid "no item to remove"
msgstr "沒有可移除的項目"

#: ../cli/src/settings.c:1968
#, c-format
msgid "index '%d' is not in range <0-%d>"
msgstr "索引「%d」不在範圍內 <0-%d>"

#: ../cli/src/settings.c:1983
#, c-format
msgid "invalid option '%s'"
msgstr "無效的選項「%s」"

#: ../cli/src/settings.c:1985
msgid "missing option"
msgstr "遺失選項"

#: ../cli/src/settings.c:2015 ../cli/src/settings.c:2035
#, c-format
msgid "'%s' is not a valid number (or out of range)"
msgstr "「%s」不是個有效的數字（或是不在範圍內）"

#: ../cli/src/settings.c:2089
#, c-format
msgid "'%s' is not a valid Ethernet MAC"
msgstr "「%s」不是個有效的乙太網路 MAC"

#: ../cli/src/settings.c:2115 ../libnm-util/nm-setting-bridge.c:277
#: ../libnm-util/nm-setting-connection.c:752
#: ../libnm-util/nm-setting-vlan.c:475
#, c-format
msgid "'%s' is not a valid interface name"
msgstr "「%s」不是組有效的介面卡名稱"

#: ../cli/src/settings.c:2133 ../cli/src/settings.c:3212
#: ../libnm-util/nm-setting-gsm.c:375
#, c-format
msgid "'%s' is not a number"
msgstr "「%s」不是個數字"

#: ../cli/src/settings.c:2185
#, c-format
msgid "'%s' is not a valid hex character"
msgstr "「%s」不是個有效的十六進位字元"

#: ../cli/src/settings.c:2215
#, c-format
msgid "'%s' is not a valid MAC"
msgstr "「%s」不是個有效的 MAC"

#: ../cli/src/settings.c:2252 ../libnm-util/nm-setting-connection.c:715
#, c-format
msgid "'%s' is not a valid UUID"
msgstr "「%s」不是個有效的 UUID"

#: ../cli/src/settings.c:2317
msgid ""
"Enter a list of user permissions. This is a list of user names formatted as:\n"
"  [user:]<user name 1>, [user:]<user name 2>,...\n"
"The items can be separated by commas or spaces.\n"
"\n"
"Example: alice bob charlie\n"
msgstr ""
"輸入使用者權限的清單。使用者名稱的清單格式為：\n"
"  [user:]<user name 1>, [user:]<user name 2>,...\n"
"每個項目可以用逗號或空白字元隔開。\n"
"\n"
"例如：alice bob charlie\n"

#: ../cli/src/settings.c:2332
#, c-format
msgid "'%s' is not valid master; use ifname or connection UUID"
msgstr "「%s」不是個有效的 master；請使用 ifname 或是連線 UUID"

#: ../cli/src/settings.c:2453
msgid "private key password not provided"
msgstr "未提供私密金鑰密碼"

#: ../cli/src/settings.c:2513
msgid ""
"Enter path to a private key and the key password (if not set yet):\n"
"  <file path> [<password>]\n"
"Example: /home/cimrman/jara-priv-key Dardanely\n"
msgstr ""
"輸入私密金鑰和金鑰密碼的路徑（若尚未設定）：\n"
"  <file path> [<password>]\n"
"範例：/home/cimrman/jara-priv-key Dardanely\n"

#: ../cli/src/settings.c:2583
msgid ""
"Enter bytes as a list of hexadecimal values.\n"
"Two formats are accepted:\n"
"(a) a string of hexadecimal digits, where each two digits represent one byte\n"
"(b) space-separated list of bytes written as hexadecimal digits (with "
"optional 0x/0X prefix, and optional leading 0).\n"
"\n"
"Examples: ab0455a6ea3a74C2\n"
"          ab 4 55 0xa6 ea 3a 74 C2\n"
msgstr ""
"以十六進位的值來輸入位元組。\n"
"接受的格式有兩種：\n"
"(a) 十六進位數字字串，每兩個數字代表一個位元組\n"
"(b) 以空格區隔開來的一列十六進位數字位元組清單（包含選用性的 0x/0x 前綴以及選用性的前置 0）。\n"
"\n"
"範例：ab0455a6ea3a74C2\n"
"          ab 4 55 0xa6 ea 3a 74 C2\n"

#: ../cli/src/settings.c:2686
#, c-format
msgid ""
"Enter a list of bonding options formatted as:\n"
"  option = <value>, option = <value>,... \n"
"Valid options are: %s\n"
"'mode' can be provided as a name or a number:\n"
"balance-rr    = 0\n"
"active-backup = 1\n"
"balance-xor   = 2\n"
"broadcast     = 3\n"
"802.3ad       = 4\n"
"balance-tlb   = 5\n"
"balance-alb   = 6\n"
"\n"
"Example: mode=2,miimon=120\n"
msgstr ""
"輸入一列 bonding 選項，格式爲：\n"
"  option = <value>, option = <value>,... \n"
"可用的選項包含：%s\n"
"'mode' 能以名稱或數字提供：\n"
"balance-rr    = 0\n"
"active-backup = 1\n"
"balance-xor   = 2\n"
"broadcast     = 3\n"
"802.3ad       = 4\n"
"balance-tlb   = 5\n"
"balance-alb   = 6\n"
"\n"
"範例：mode=2,miimon=120\n"

#: ../cli/src/settings.c:2727
#, c-format
msgid "'%s' is not a valid InfiniBand MAC"
msgstr "「%s」不是個有效的 InfiniBand MAC"

#: ../cli/src/settings.c:2765
#, c-format
msgid "'%s' is not a valid IBoIP P_Key"
msgstr "「%s」不是個有效的 IBoIP P_Key"

#: ../cli/src/settings.c:2825
msgid ""
"Enter a list of IPv4 addresses of DNS servers.\n"
"\n"
"Example: 8.8.8.8, 8.8.4.4\n"
msgstr "輸入一列 DNS 伺服器的 IPv4 位址。\n"
"\n"
"範例：8.8.8.8, 8.8.4.4\n"

#: ../cli/src/settings.c:2871 ../cli/src/settings.c:3123
#, c-format
msgid "'%s' is not valid (use ip[/prefix] [gateway])"
msgstr "「%s」無效（請使用 ip[/prefix] [gateway]）"

#: ../cli/src/settings.c:2897
msgid ""
"Enter a list of IPv4 addresses formatted as:\n"
"  ip[/prefix] [gateway], ip[/prefix] [gateway],...\n"
"Missing prefix is regarded as prefix of 32.\n"
"\n"
"Example: 192.168.1.5/24 192.168.1.1, 10.0.0.11/24\n"
msgstr ""
"輸入一列 IPv4 位址，格式為：\n"
"  ip[/prefix] [gateway], ip[/prefix] [gateway],...\n"
"遺失的前綴會被視為 32 這個前綴。\n"
"\n"
"範例：192.168.1.5/24 192.168.1.1, 10.0.0.11/24\n"

#: ../cli/src/settings.c:2954
#, c-format
msgid "'%s' is not valid (use ip/[prefix] next-hop [metric])"
msgstr "「%s」無效（請使用 ip/[prefix] next-hop [metric]）"

#: ../cli/src/settings.c:2980
msgid ""
"Enter a list of IPv4 routes formatted as:\n"
"  ip/[prefix] next-hop [metric],...\n"
"Missing prefix is regarded as a prefix of 32.\n"
"Missing metric is regarded as a metric of 0.\n"
"\n"
"Example: 192.168.2.0/24 192.168.2.1 3, 10.1.0.0/16 10.0.0.254\n"
msgstr ""
"輸入一列 IPv4 路由，格式為：\n"
"  ip/[prefix] next-hop [metric],...\n"
"Missing prefix is regarded as a prefix of 32.\n"
"Missing metric is regarded as a metric of 0.\n"
"\n"
"Example: 192.168.2.0/24 192.168.2.1 3, 10.1.0.0/16 10.0.0.254\n"

#: ../cli/src/settings.c:3071
msgid ""
"Enter a list of IPv6 addresses of DNS servers.  If the IPv6 configuration "
"method is 'auto' these DNS servers are appended to those (if any) returned "
"by automatic configuration.  DNS servers cannot be used with the 'shared' or "
"'link-local' IPv6 configuration methods, as there is no upstream network. In "
"all other IPv6 configuration methods, these DNS servers are used as the only "
"DNS servers for this connection.\n"
"\n"
"Example: 2607:f0d0:1002:51::4, 2607:f0d0:1002:51::1\n"
msgstr ""
"輸入一列 DNS 伺服器的 IPv6 位址。若 IPv6 配置方式為「auto」，這些 DNS "
"伺服器將會被附加至那些由自動配置所回傳的項目（若存在的話）。因為沒有上游網路，因此 DNS 伺服器不可搭配「shared」或是「link-"
"local」IPv6 配置方式使用。在所有其它 IPv6 配置方式中，這些 DNS 伺服器會被作為此連線的唯一 DNS 伺服器使用。\n"
"\n"
"範例：2607:f0d0:1002:51::4, 2607:f0d0:1002:51::1\n"

#: ../cli/src/settings.c:3149
msgid ""
"Enter a list of IPv6 addresses formatted as:\n"
"  ip[/prefix] [gateway], ip[/prefix] [gateway],...\n"
"Missing prefix is regarded as prefix of 128.\n"
"\n"
"Example: 2607:f0d0:1002:51::4/64 2607:f0d0:1002:51::1, 1050:0:0:0:5:600:300c:"
"326b\n"
msgstr ""
"輸入一列 IPv6 位址，格式為：\n"
"  ip[/prefix] [gateway], ip[/prefix] [gateway],...\n"
"遺失的前綴會被視為 128 這個前綴。\n"
"\n"
"範例：2607:f0d0:1002:51::4/64 2607:f0d0:1002:51::1, 1050:0:0:0:5:600:300c:"
"326b\n"

#: ../cli/src/settings.c:3171
#, c-format
msgid "'%s' is not valid (use <dest IP>/prefix <next-hop IP> [metric])"
msgstr "「%s」無效（請使用 <dest IP>/prefix <next-hop IP> [metric]）"

#: ../cli/src/settings.c:3197
msgid ""
"Enter a list of IPv6 routes formatted as:\n"
"  ip/[prefix] next-hop [metric],...\n"
"Missing prefix is regarded as a prefix of 128.\n"
"Missing metric is regarded as a metric of 0.\n"
"\n"
"Example: 2001:db8:beef:2::/64 2001:db8:beef::2, 2001:db8:beef:3::/64 2001:"
"db8:beef::3 2\n"
msgstr ""
"輸入一列 IPv6 路由，格式為：\n"
"  ip/[prefix] next-hop [metric],...\n"
"Missing prefix is regarded as a prefix of 128.\n"
"Missing metric is regarded as a metric of 0.\n"
"\n"
"Example: 2001:db8:beef:2::/64 2001:db8:beef::2, 2001:db8:beef:3::/64 2001:"
"db8:beef::3 2\n"

#: ../cli/src/settings.c:3219
#, c-format
msgid "'%s' is not valid; use 0, 1, or 2"
msgstr "「%s」無效；請使用 0、1 或 2"

#: ../cli/src/settings.c:3236
#, c-format
msgid "'%s' is not a valid channel; use <1-13>"
msgstr "「%s」不是個有效的頻道；請使用 <1-13>"

#: ../cli/src/settings.c:3257
#, c-format
msgid "'%s' is not valid; use [e, o, n]"
msgstr "「%s」無效；請使用 [e, o, n]"

#: ../cli/src/settings.c:3285
msgid ""
"nmcli can accepts both direct JSON configuration data and a file name "
"containing the configuration. In the latter case the file is read and the "
"contents is put into this property.\n"
"\n"
"Examples: set team.config { \"device\": \"team0\", \"runner\": {\"name\": "
"\"roundrobin\"}, \"ports\": {\"eth1\": {}, \"eth2\": {}} }\n"
"          set team.config /etc/my-team.conf\n"
msgstr ""
"nmcli 能接受直接的 JSON 配置資料以及一組包含了配置的檔案名稱。當在第二種情況下時，檔案會被讀取並且內容會被放入此內容中。\n"
"\n"
"範例：set team.config { \"device\": \"team0\", \"runner\": {\"name\": "
"\"roundrobin\"}, \"ports\": {\"eth1\": {}, \"eth2\": {}} }\n"
"          set team.config /etc/my-team.conf\n"

#: ../cli/src/settings.c:3325
msgid "no priority to remove"
msgstr "沒有可移除的優先順序"

#: ../cli/src/settings.c:3329
#, c-format
msgid "index '%d' is not in the range of <0-%d>"
msgstr "索引「%d」不在 <0-%d> 的範圍內"

#: ../cli/src/settings.c:3444
#, c-format
msgid "'%s' is not valid; 3 strings should be provided"
msgstr "「%s」無效；應提供三個字串"

#: ../cli/src/settings.c:3463
msgid ""
"Enter a list of three channels (comma or space separated).\n"
"\n"
"Example: 0.0.0e20 0.0.0e21 0.0.0e22\n"
msgstr "輸入一列三個頻道（以逗號或空格區隔開）。\n"
"\n"
"範例：0.0.0e20 0.0.0e21 0.0.0e22\n"

#: ../cli/src/settings.c:3513
#, c-format
msgid ""
"Enter a list of S/390 options formatted as:\n"
"  option = <value>, option = <value>,...\n"
"Valid options are: %s\n"
msgstr "輸入一列 S/390 選項，格式為：\n"
"  option = <value>, option = <value>,...\n"
"可用選項為：%s\n"

#: ../cli/src/settings.c:3559
#, c-format
msgid "'%s' is not a valid channel"
msgstr "「%s」不是個有效的頻道"

#: ../cli/src/settings.c:3565
#, c-format
msgid "'%ld' is not a valid channel"
msgstr "「%ld」不是個有效的頻道"

#: ../cli/src/settings.c:3668 ../cli/src/settings.c:3671
#, c-format
msgid "WEP key is guessed to be of '%s'\n"
msgstr "預測 WEP key 為「%s」\n"

#: ../cli/src/settings.c:3695
#, c-format
msgid "'%s' not among [0 (unknown), 1 (key), 2 (passphrase)]"
msgstr "「%s」不在 [0 (unknown), 1 (key), 2 (passphrase)] 之間"

#: ../cli/src/settings.c:3715
#, c-format
msgid ""
"Enter the type of WEP keys. The accepted values are: 0 or unknown, 1 or key, "
"and 2 or passphrase.\n"
msgstr "輸入 WEP key 的類型。接受的值為：0 或 unknown、1 或 key，以及 2 或 passphrase。\n"

#: ../cli/src/settings.c:3728
#, c-format
msgid "'%s' is not a valid PSK"
msgstr "「%s」不是個有效的 PSK"

#: ../cli/src/settings.c:3772
#, c-format
msgid "'%s' is not a valid DCB flag"
msgstr "「%s」不是有效的 DCB 旗標"

#: ../cli/src/settings.c:3795
#, c-format
msgid "'%s' is not a DCB app priority"
msgstr "「%s」不是有效的 DCP 應用程式優先順序"

#: ../cli/src/settings.c:3821
msgid "must contain 8 comma-separated numbers"
msgstr "必須包含 8 個以逗號區隔開的數字"

#: ../cli/src/settings.c:3838
#, c-format
msgid "'%s' not a number between 0 and %u (inclusive) or %u"
msgstr "「%s」不是組介於 0 和（包含）%u 之間的數字或是 %u"

#: ../cli/src/settings.c:3841
#, c-format
msgid "'%s' not a number between 0 and %u (inclusive)"
msgstr "「%s」不是組介於 0 和（包含）%u 之間的數字"

#: ../cli/src/settings.c:3863
#, c-format
msgid "Warning: changes will have no effect until '%s' includes 1 (enabled)\n"
"\n"
msgstr "警告：在「%s」包含 1（啟用）之前，變更將不會生效\n"
"\n"

#: ../cli/src/settings.c:3916
#, c-format
msgid "bandwidth percentages must total 100%%"
msgstr "頻寬比率總額必須是 100%%"

#: ../cli/src/settings.c:5594
msgid "don't know how to get the property value"
msgstr "不知如何取得內容值"

#: ../cli/src/settings.c:5647 ../cli/src/settings.c:5687
msgid "the property can't be changed"
msgstr "內容不可更改"

#: ../cli/src/settings.c:5791
msgid "[NM property description]"
msgstr "[NM property description]"

#: ../cli/src/settings.c:5797
msgid "[nmcli specific description]"
msgstr "[nmcli specific description]"

#: ../cli/src/utils.c:111
#, c-format
msgid "Error: value for '%s' argument is required."
msgstr "錯誤：「%s」引數需要有個值。"

#: ../cli/src/utils.c:136
#, c-format
msgid "Error: Argument '%s' was expected, but '%s' provided."
msgstr "錯誤：預期「%s」引數，但卻提供了「%s」。"

#: ../cli/src/utils.c:139
#, c-format
msgid "Error: Unexpected argument '%s'"
msgstr "錯誤：非預期的引數「%s」"

#: ../cli/src/utils.c:189
#, c-format
msgid "Error converting IP4 address '0x%X' to text form"
msgstr "將 IP4 位址「0x%X」轉換為文字格式時發生了錯誤"

#: ../cli/src/utils.c:217
#, c-format
msgid "Error converting IP6 address '%s' to text form"
msgstr "將 IP6 位址「%s」轉換為文字格式時發生了錯誤"

#: ../cli/src/utils.c:393
#, c-format
msgid "'%s' is not valid; use [%s] or [%s]"
msgstr "「%s」無效；請使用「%s」或是「%s」"

#: ../cli/src/utils.c:475
#, c-format
msgid "'%s' is ambiguous (%s x %s)"
msgstr "「%s」意義含糊不清（%s x %s）"

#: ../cli/src/utils.c:487
#, c-format
msgid "missing name, try one of [%s]"
msgstr "名稱遺失，請嘗試 [%s] 其中之一"

#: ../cli/src/utils.c:718
#, c-format
msgid "field '%s' has to be alone"
msgstr "欄位 '%s' 必須是單獨的"

#: ../cli/src/utils.c:720
#, c-format
msgid "invalid field '%s'; allowed fields: %s"
msgstr "無效的欄位「%s」; 允許的欄位：%s"

#: ../cli/src/utils.c:747
msgid "Option '--terse' requires specifying '--fields'"
msgstr "選項 '--terse' 需指定 '--fields'"

#: ../cli/src/utils.c:751
#, c-format
msgid "Option '--terse' requires specific '--fields' option values , not '%s'"
msgstr "選項 '--terse' 需要特定的 '--fields' 選項值，而不是 '%s'"

#: ../cli/src/utils.c:1070
#, c-format
msgid ""
"Warning: nmcli (%s) and NetworkManager (%s) versions don't match. Use --"
"nocheck to suppress the warning.\n"
msgstr "警告：nmcli（%s）和 NetworkManager（%s）的版本不符。請使用 --nocheck 來抑止警告訊息。\n"

#: ../cli/src/utils.c:1079
#, c-format
msgid ""
"Error: nmcli (%s) and NetworkManager (%s) versions don't match. Force "
"execution using --nocheck, but the results are unpredictable."
msgstr "錯誤：nmcli（%s）和 NetworkManager（%s）的版本不符。請使用 --nocheck 來強制執行，不過結果無法預期。"

#: ../libnm-util/crypto.c:133
#, c-format
msgid "PEM key file had no end tag '%s'."
msgstr "PEM 金鑰檔案沒有結束標籤「%s」。"

#: ../libnm-util/crypto.c:146
#, c-format
msgid "Doesn't look like a PEM private key file."
msgstr "看起來不像是 PEM 私密金鑰檔案。"

#: ../libnm-util/crypto.c:163
#, c-format
msgid "Malformed PEM file: Proc-Type was not first tag."
msgstr "格式不良的 PEM 檔案：Proc-Type 不是第一個標籤。"

#: ../libnm-util/crypto.c:171
#, c-format
msgid "Malformed PEM file: unknown Proc-Type tag '%s'."
msgstr "格式不良的 PEM 檔案：不明的 Proc-Type 標籤「%s」"

#: ../libnm-util/crypto.c:181
#, c-format
msgid "Malformed PEM file: DEK-Info was not the second tag."
msgstr "格式不良的 PEM 檔案：DEK-Info 不是第二個標籤。"

#: ../libnm-util/crypto.c:192
#, c-format
msgid "Malformed PEM file: no IV found in DEK-Info tag."
msgstr "格式不良的 PEM 檔案：在 DEK-Info 標籤中找不到 IV。"

#: ../libnm-util/crypto.c:199
#, c-format
msgid "Malformed PEM file: invalid format of IV in DEK-Info tag."
msgstr "格式不良的 PEM 檔案：DEK-Info 標籤中的 IV 格式是無效的。"

#: ../libnm-util/crypto.c:212
#, c-format
msgid "Malformed PEM file: unknown private key cipher '%s'."
msgstr "格式不良的 PEM 檔案：不明的私密金鑰加密器「%s」。"

#: ../libnm-util/crypto.c:231
#, c-format
msgid "Could not decode private key."
msgstr "無法解碼私密金鑰。"

#: ../libnm-util/crypto.c:283
msgid "Failed to find expected PKCS#8 start tag."
msgstr "找不到預期的 PKCS#8 起始標籤。"

#: ../libnm-util/crypto.c:291
#, c-format
msgid "Failed to find expected PKCS#8 end tag '%s'."
msgstr "找不到預期的 PKCS#8 結束標籤「%s」。"

#: ../libnm-util/crypto.c:310
msgid "Failed to decode PKCS#8 private key."
msgstr "無法將 PKCS#8 私密金鑰解碼。"

#: ../libnm-util/crypto.c:352
#, c-format
msgid "IV must be an even number of bytes in length."
msgstr "IV 的長度必須為偶數位元組。"

#: ../libnm-util/crypto.c:366
#, c-format
msgid "IV contains non-hexadecimal digits."
msgstr "IV 包含非十六進位的數字。"

#: ../libnm-util/crypto.c:404 ../libnm-util/crypto_gnutls.c:147
#: ../libnm-util/crypto_gnutls.c:259 ../libnm-util/crypto_nss.c:167
#: ../libnm-util/crypto_nss.c:326
#, c-format
msgid "Private key cipher '%s' was unknown."
msgstr "私密金鑰加密器「%s」不明。"

#: ../libnm-util/crypto.c:511
#, c-format
msgid "Unable to determine private key type."
msgstr "無法決定私密金鑰的類型。"

#: ../libnm-util/crypto.c:566
#, c-format
msgid "PEM certificate had no start tag '%s'."
msgstr "PEM 憑證沒有起始標籤「%s」。"

#: ../libnm-util/crypto.c:575
#, c-format
msgid "PEM certificate had no end tag '%s'."
msgstr "PEM 憑證沒有結束標籤「%s」。"

#: ../libnm-util/crypto.c:593
#, c-format
msgid "Failed to decode certificate."
msgstr "解碼憑證失敗。"

#: ../libnm-util/crypto_gnutls.c:50
msgid "Failed to initialize the crypto engine."
msgstr "初始化 crypto 引擎失敗。"

#: ../libnm-util/crypto_gnutls.c:92
#, c-format
msgid "Failed to initialize the MD5 engine: %s / %s."
msgstr "初始化 MD5 引擎失敗： %s / %s。"

#: ../libnm-util/crypto_gnutls.c:155
#, c-format
msgid "Invalid IV length (must be at least %zd)."
msgstr "不合乎規定的 IV 長度（必須至少是 %zd）。"

#: ../libnm-util/crypto_gnutls.c:166
#, c-format
msgid "Failed to initialize the decryption cipher context: %s / %s."
msgstr "初始化解密用的加密器失敗： %s / %s。"

#: ../libnm-util/crypto_gnutls.c:175
#, c-format
msgid "Failed to set symmetric key for decryption: %s / %s."
msgstr "設定解密用的對稱式金鑰失敗： %s / %s。"

#: ../libnm-util/crypto_gnutls.c:184
#, c-format
msgid "Failed to set IV for decryption: %s / %s."
msgstr "設定解密用的 IV 失敗： %s / %s。"

#: ../libnm-util/crypto_gnutls.c:193
#, c-format
msgid "Failed to decrypt the private key: %s / %s."
msgstr "解密私密金鑰失敗： %s / %s。"

#: ../libnm-util/crypto_gnutls.c:203 ../libnm-util/crypto_nss.c:257
#, c-format
msgid "Failed to decrypt the private key: unexpected padding length."
msgstr "解密私密金鑰失敗：無預期的填空長度。"

#: ../libnm-util/crypto_gnutls.c:214 ../libnm-util/crypto_nss.c:268
#, c-format
msgid "Failed to decrypt the private key."
msgstr "解密私密金鑰失敗。"

#: ../libnm-util/crypto_gnutls.c:281
#, c-format
msgid "Failed to initialize the encryption cipher context: %s / %s."
msgstr "初始化加密用的加密器失敗： %s / %s。"

#: ../libnm-util/crypto_gnutls.c:290
#, c-format
msgid "Failed to set symmetric key for encryption: %s / %s."
msgstr "設定加密用的對稱式金鑰失敗： %s / %s。"

#: ../libnm-util/crypto_gnutls.c:300
#, c-format
msgid "Failed to set IV for encryption: %s / %s."
msgstr "設定加密用的 IV 失敗： %s / %s。"

#: ../libnm-util/crypto_gnutls.c:309
#, c-format
msgid "Failed to encrypt the data: %s / %s."
msgstr "加密私密金鑰失敗： %s / %s。"

#: ../libnm-util/crypto_gnutls.c:349
#, c-format
msgid "Error initializing certificate data: %s"
msgstr "初始化憑證資料時發生錯誤：%s"

#: ../libnm-util/crypto_gnutls.c:371
#, c-format
msgid "Couldn't decode certificate: %s"
msgstr "無法解碼憑證：%s"

#: ../libnm-util/crypto_gnutls.c:395
#, c-format
msgid "Couldn't initialize PKCS#12 decoder: %s"
msgstr "無法啟動 PKCS#12 解碼程式：%s"

#: ../libnm-util/crypto_gnutls.c:408
#, c-format
msgid "Couldn't decode PKCS#12 file: %s"
msgstr "無法解碼 PKCS#12 檔案：%s"

#: ../libnm-util/crypto_gnutls.c:420
#, c-format
msgid "Couldn't verify PKCS#12 file: %s"
msgstr "無法驗證 PKCS# 12 檔案：%s"

#: ../libnm-util/crypto_gnutls.c:448
#, c-format
msgid "Couldn't initialize PKCS#8 decoder: %s"
msgstr "無法初始化 PKCS#8 解碼器：%s"

#: ../libnm-util/crypto_gnutls.c:471
#, c-format
msgid "Couldn't decode PKCS#8 file: %s"
msgstr "無法解碼 PKCS#8 檔案：%s"

#: ../libnm-util/crypto_nss.c:56
#, c-format
msgid "Failed to initialize the crypto engine: %d."
msgstr "初始化 crypto 引擎失敗： %d。"

#: ../libnm-util/crypto_nss.c:107
#, c-format
msgid "Failed to initialize the MD5 context: %d."
msgstr "初始化 MD5 本文失敗：%d。"

#: ../libnm-util/crypto_nss.c:175
#, c-format
msgid "Invalid IV length (must be at least %d)."
msgstr "不合於規定的 IV 長度（必須至少是 %d）。"

#: ../libnm-util/crypto_nss.c:186
#, c-format
msgid "Failed to initialize the decryption cipher slot."
msgstr "初始化解密用的加密器插槽失敗。"

#: ../libnm-util/crypto_nss.c:196
#, c-format
msgid "Failed to set symmetric key for decryption."
msgstr "設定解密用的對稱式金鑰失敗。"

#: ../libnm-util/crypto_nss.c:206
#, c-format
msgid "Failed to set IV for decryption."
msgstr "設定解密用的 IV 失敗。"

#: ../libnm-util/crypto_nss.c:214
#, c-format
msgid "Failed to initialize the decryption context."
msgstr "初始化解密上下文失敗。"

#: ../libnm-util/crypto_nss.c:227
#, c-format
msgid "Failed to decrypt the private key: %d."
msgstr "解密私密金鑰失敗：%d。"

#: ../libnm-util/crypto_nss.c:235
#, c-format
msgid "Failed to decrypt the private key: decrypted data too large."
msgstr "解密私密金鑰失敗：解密的資料太龐大。"

#: ../libnm-util/crypto_nss.c:246
#, c-format
msgid "Failed to finalize decryption of the private key: %d."
msgstr "結束私密金鑰的解密失敗：%d。"

#: ../libnm-util/crypto_nss.c:348
#, c-format
msgid "Failed to initialize the encryption cipher slot."
msgstr "初始化加密用的加密器插槽失敗。"

#: ../libnm-util/crypto_nss.c:356
#, c-format
msgid "Failed to set symmetric key for encryption."
msgstr "設定加密用的對稱式金鑰失敗。"

#: ../libnm-util/crypto_nss.c:364
#, c-format
msgid "Failed to set IV for encryption."
msgstr "設定加密用的 IV 失敗。"

#: ../libnm-util/crypto_nss.c:372
#, c-format
msgid "Failed to initialize the encryption context."
msgstr "初始化加密本文失敗。"

#: ../libnm-util/crypto_nss.c:380
#, c-format
msgid "Failed to encrypt: %d."
msgstr "加密失敗：%d。"

#: ../libnm-util/crypto_nss.c:388
#, c-format
msgid "Unexpected amount of data after encrypting."
msgstr "加密後無預期的資料量。"

#: ../libnm-util/crypto_nss.c:431
#, c-format
msgid "Couldn't decode certificate: %d"
msgstr "無法解碼憑證：%d"

#: ../libnm-util/crypto_nss.c:466
#, c-format
msgid "Couldn't convert password to UCS2: %d"
msgstr "無法將密碼轉為 UCS2：%d"

#: ../libnm-util/crypto_nss.c:494
#, c-format
msgid "Couldn't initialize PKCS#12 decoder: %d"
msgstr "無法初始化 PKCS#12 解碼程式：%d"

#: ../libnm-util/crypto_nss.c:503
#, c-format
msgid "Couldn't decode PKCS#12 file: %d"
msgstr "無法解碼 PKCS#12 檔案：%d"

#: ../libnm-util/crypto_nss.c:512
#, c-format
msgid "Couldn't verify PKCS#12 file: %d"
msgstr "無法驗證 PKCS#12 檔案：%d"

#: ../libnm-util/crypto_nss.c:556
msgid "Could not generate random data."
msgstr "無法產生隨機資料。"

#: ../libnm-util/nm-setting-8021x.c:2170 ../libnm-util/nm-setting-8021x.c:2187
#: ../libnm-util/nm-setting-8021x.c:2228 ../libnm-util/nm-setting-8021x.c:2245
#: ../libnm-util/nm-setting-8021x.c:2297 ../libnm-util/nm-setting-8021x.c:2309
#: ../libnm-util/nm-setting-8021x.c:2327 ../libnm-util/nm-setting-8021x.c:2339
#: ../libnm-util/nm-setting-8021x.c:2363 ../libnm-util/nm-setting-8021x.c:2539
#: ../libnm-util/nm-setting-adsl.c:212
#: ../libnm-util/nm-setting-bluetooth.c:144
#: ../libnm-util/nm-setting-bluetooth.c:162
#: ../libnm-util/nm-setting-bond.c:498 ../libnm-util/nm-setting-bridge.c:268
#: ../libnm-util/nm-setting-cdma.c:163
#: ../libnm-util/nm-setting-connection.c:692
#: ../libnm-util/nm-setting-connection.c:708
#: ../libnm-util/nm-setting-connection.c:763
#: ../libnm-util/nm-setting-ip4-config.c:705
#: ../libnm-util/nm-setting-ip4-config.c:715
#: ../libnm-util/nm-setting-ip6-config.c:687
#: ../libnm-util/nm-setting-ip6-config.c:697
#: ../libnm-util/nm-setting-ip6-config.c:750
#: ../libnm-util/nm-setting-olpc-mesh.c:127
#: ../libnm-util/nm-setting-pppoe.c:165 ../libnm-util/nm-setting-team.c:131
#: ../libnm-util/nm-setting-vpn.c:405 ../libnm-util/nm-setting-wimax.c:137
#: ../libnm-util/nm-setting-wireless-security.c:795
#: ../libnm-util/nm-setting-wireless.c:697
msgid "property is missing"
msgstr "找不到屬性"

#: ../libnm-util/nm-setting-8021x.c:2177 ../libnm-util/nm-setting-8021x.c:2194
#: ../libnm-util/nm-setting-8021x.c:2235 ../libnm-util/nm-setting-8021x.c:2252
#: ../libnm-util/nm-setting-8021x.c:2303 ../libnm-util/nm-setting-8021x.c:2315
#: ../libnm-util/nm-setting-8021x.c:2333 ../libnm-util/nm-setting-8021x.c:2345
#: ../libnm-util/nm-setting-8021x.c:2369 ../libnm-util/nm-setting-adsl.c:219
#: ../libnm-util/nm-setting-adsl.c:228 ../libnm-util/nm-setting-cdma.c:179
#: ../libnm-util/nm-setting-cdma.c:188
#: ../libnm-util/nm-setting-connection.c:699
#: ../libnm-util/nm-setting-connection.c:770
#: ../libnm-util/nm-setting-gsm.c:284 ../libnm-util/nm-setting-gsm.c:341
#: ../libnm-util/nm-setting-gsm.c:350
#: ../libnm-util/nm-setting-ip4-config.c:766
#: ../libnm-util/nm-setting-ip4-config.c:775
#: ../libnm-util/nm-setting-pppoe.c:172 ../libnm-util/nm-setting-pppoe.c:181
#: ../libnm-util/nm-setting-vpn.c:414 ../libnm-util/nm-setting-vpn.c:424
#: ../libnm-util/nm-setting-wimax.c:146
#: ../libnm-util/nm-setting-wireless-security.c:825
#: ../libnm-util/nm-setting-wireless-security.c:833
#: ../libnm-util/nm-setting-wireless-security.c:857
msgid "property is empty"
msgstr "屬性為空"

#: ../libnm-util/nm-setting-8021x.c:2205 ../libnm-util/nm-setting-8021x.c:2217
#: ../libnm-util/nm-setting-8021x.c:2263 ../libnm-util/nm-setting-8021x.c:2275
#, c-format
msgid "has to match '%s' property for PKCS#12"
msgstr "必須符合 PKCS#12 的 '%s' 屬性"

#: ../libnm-util/nm-setting-8021x.c:2514 ../libnm-util/nm-setting-8021x.c:2548
#: ../libnm-util/nm-setting-bluetooth.c:153
#: ../libnm-util/nm-setting-bond.c:507
#: ../libnm-util/nm-setting-infiniband.c:203
#: ../libnm-util/nm-setting-infiniband.c:218
#: ../libnm-util/nm-setting-ip4-config.c:757
#: ../libnm-util/nm-setting-ip6-config.c:741
#: ../libnm-util/nm-setting-olpc-mesh.c:155
#: ../libnm-util/nm-setting-team.c:140 ../libnm-util/nm-setting-wimax.c:155
#: ../libnm-util/nm-setting-wired.c:607 ../libnm-util/nm-setting-wired.c:616
#: ../libnm-util/nm-setting-wireless-security.c:876
#: ../libnm-util/nm-setting-wireless-security.c:885
#: ../libnm-util/nm-setting-wireless-security.c:893
#: ../libnm-util/nm-setting-wireless-security.c:901
#: ../libnm-util/nm-setting-wireless-security.c:909
#: ../libnm-util/nm-setting-wireless-security.c:918
#: ../libnm-util/nm-setting-wireless-security.c:927
#: ../libnm-util/nm-setting-wireless-security.c:936
#: ../libnm-util/nm-setting-wireless-security.c:972
#: ../libnm-util/nm-setting-wireless-security.c:982
#: ../libnm-util/nm-setting-wireless.c:757
#: ../libnm-util/nm-setting-wireless.c:766
#: ../libnm-util/nm-setting-wireless.c:775
msgid "property is invalid"
msgstr "屬性不合規定"

#: ../libnm-util/nm-setting-8021x.c:2573 ../libnm-util/nm-setting-8021x.c:2583
#: ../libnm-util/nm-setting-8021x.c:2593 ../libnm-util/nm-setting-8021x.c:2603
#: ../libnm-util/nm-setting-8021x.c:2613 ../libnm-util/nm-setting-adsl.c:239
#: ../libnm-util/nm-setting-adsl.c:250
#: ../libnm-util/nm-setting-bluetooth.c:170
#: ../libnm-util/nm-setting-wireless-security.c:804
#, c-format
msgid "'%s' is not a valid value for the property"
msgstr "'%s' 不是合於屬性規定的值"

#: ../libnm-util/nm-setting-bluetooth.c:188
#, c-format
msgid "requires '%s' or '%s' setting"
msgstr "需要 '%s' 或 '%s' 設定"

#: ../libnm-util/nm-setting-bond.c:518
#, c-format
msgid "invalid option '%s' or its value '%s'"
msgstr "不合於規定的選項 '%s' 或其值為 '%s'"

#: ../libnm-util/nm-setting-bond.c:537
#, c-format
msgid "only one of '%s' and '%s' can be set"
msgstr "只能設定 '%s' 與 '%s' 其中之一"

#: ../libnm-util/nm-setting-bond.c:548
#, c-format
msgid "mandatory option '%s' is missing"
msgstr "找不到必要選項 '%s'"

#: ../libnm-util/nm-setting-bond.c:557
#, c-format
msgid "'%s' is not a valid value for '%s'"
msgstr "'%s' 不是合於 '%s' 規定的值"

#: ../libnm-util/nm-setting-bond.c:570
#, c-format
msgid "'%s=%s' is incompatible with '%s > 0'"
msgstr "'%s=%s' 與 '%s > 0' 不相容"

#: ../libnm-util/nm-setting-bond.c:583
#, c-format
msgid "'%s' is not a valid interface name for '%s' option"
msgstr "'%s' 不是 '%s' 選項合於規定的介面名稱"

#: ../libnm-util/nm-setting-bond.c:593
#, c-format
msgid "'%s' option is only valid for '%s=%s'"
msgstr "'%s' 選項僅適用於 '%s=%s'"

#: ../libnm-util/nm-setting-bond.c:606
#, c-format
msgid "'%s=%s' is not a valid configuration for '%s'"
msgstr "'%s=%s' 不是合於 '%s' 規定的配置"

#: ../libnm-util/nm-setting-bond.c:619 ../libnm-util/nm-setting-bond.c:628
#: ../libnm-util/nm-setting-bond.c:648 ../libnm-util/nm-setting-bond.c:684
#, c-format
msgid "'%s' option requires '%s' option to be set"
msgstr "'%s' 選項需要先設定 '%s' 選項"

#: ../libnm-util/nm-setting-bond.c:659
#, c-format
msgid "'%s' option is empty"
msgstr "未設定 '%s' 選項"

#: ../libnm-util/nm-setting-bond.c:671
#, c-format
msgid "'%s' is not a valid IPv4 address for '%s' option"
msgstr "'%s' 不是合於 '%s' 選項的 IPv4 位址。"

#: ../libnm-util/nm-setting-bridge-port.c:155
#: ../libnm-util/nm-setting-bridge-port.c:167
#, c-format
msgid "'%d' is not a valid value for the property (should be <= %d)"
msgstr "'%d' 不是屬性合於規定的值（應該 <= %d）"

#: ../libnm-util/nm-setting-bridge.c:251
#, c-format
msgid "value '%d' is out of range <%d-%d>"
msgstr "'%d' 值落在範圍之外 <%d-%d>"

#: ../libnm-util/nm-setting-cdma.c:170
msgid "property is empty'"
msgstr "屬性為空"

#: ../libnm-util/nm-setting-connection.c:734
#, c-format
msgid "'%s' doesn't match the virtual interface name '%s'"
msgstr "'%s' 並不與虛擬介面名稱 '%s' 相符"

#: ../libnm-util/nm-setting-connection.c:780
#, c-format
msgid "requires presence of '%s' setting in the connection"
msgstr "連線中需要 '%s' 設定存在"

#: ../libnm-util/nm-setting-connection.c:802
msgid "IPv4 configuration is not allowed for slave"
msgstr "slave 並不允許 IPv4 配置"

#: ../libnm-util/nm-setting-connection.c:815
msgid "IPv6 configuration is not allowed for slave"
msgstr "slave 並不允許 IPv6 配置"

#: ../libnm-util/nm-setting-dcb.c:595
msgid "flags invalid"
msgstr "旗標不合規定"

#: ../libnm-util/nm-setting-dcb.c:604
msgid "flags invalid - disabled"
msgstr "旗標不合規定 - 已停用"

#: ../libnm-util/nm-setting-dcb.c:630 ../libnm-util/nm-setting-dcb.c:679
msgid "property invalid (not enabled)"
msgstr "屬性不合規定（未啟用）"

#: ../libnm-util/nm-setting-dcb.c:639
msgid "element invalid"
msgstr "元素不合規定"

#: ../libnm-util/nm-setting-dcb.c:654
msgid "sum not 100%"
msgstr "總和不是 100%"

#: ../libnm-util/nm-setting-dcb.c:688 ../libnm-util/nm-setting-dcb.c:720
msgid "property invalid"
msgstr "屬性不合規定"

#: ../libnm-util/nm-setting-dcb.c:710
msgid "property missing"
msgstr "找不到屬性"

#: ../libnm-util/nm-setting-gsm.c:297
#, c-format
msgid "property value '%s' is empty or too long (>64)"
msgstr "屬性值 '%s' 是空的，或太長（>64）"

#: ../libnm-util/nm-setting-gsm.c:329
#, c-format
msgid "'%s' contains invalid char(s) (use [A-Za-z._-])"
msgstr "'%s' 包含不合規定的字元（請使用 [A-Za-z._-]）"

#: ../libnm-util/nm-setting-gsm.c:364
#, c-format
msgid "'%s' length is invalid (should be 5 or 6 digits)"
msgstr "'%s' 的長度不合規定（應為 5 或 6 位數）"

#: ../libnm-util/nm-setting-infiniband.c:228
msgid "not a valid interface name"
msgstr "不是合於規定的介面名稱"

#: ../libnm-util/nm-setting-infiniband.c:236
msgid "Must specify a P_Key if specifying parent"
msgstr "如果指定父屬，就必須指定一組 P_Key"

#: ../libnm-util/nm-setting-infiniband.c:246
msgid "InfiniBand P_Key connection did not specify parent interface name"
msgstr "InfiniBand P_Key 連線並位指定父介面的名稱"

#: ../libnm-util/nm-setting-ip4-config.c:726
#: ../libnm-util/nm-setting-ip4-config.c:736
#: ../libnm-util/nm-setting-ip4-config.c:746
#: ../libnm-util/nm-setting-ip6-config.c:709
#: ../libnm-util/nm-setting-ip6-config.c:719
#: ../libnm-util/nm-setting-ip6-config.c:729
#, c-format
msgid "this property is not allowed for '%s=%s'"
msgstr "此屬性不能用於 '%s=%s'"

#: ../libnm-util/nm-setting-ip4-config.c:789
#, c-format
msgid "%d. IPv4 address is invalid"
msgstr "%d。IPv4 位址不合規定"

#: ../libnm-util/nm-setting-ip4-config.c:799
#, c-format
msgid "%d. IPv4 address has invalid prefix"
msgstr "%d。IPv4 位址的前綴不合規定"

#: ../libnm-util/nm-setting-ip4-config.c:815
#, c-format
msgid "%d. route is invalid"
msgstr "%d。路徑不合規定"

#: ../libnm-util/nm-setting-ip4-config.c:825
#, c-format
msgid "%d. route has invalid prefix"
msgstr "%d。路徑的前綴不合規定"

#: ../libnm-util/nm-setting-ip6-config.c:708
#, c-format
msgid "'%s' not allowed for %s=%s"
msgstr "'%s' 不能用於 %s=%s"

#: ../libnm-util/nm-setting-olpc-mesh.c:136
#: ../libnm-util/nm-setting-wireless.c:706
msgid "SSID length is out of range <1-32> bytes"
msgstr "SSID 的長度落於範圍 <1-32> 位元之外"

#: ../libnm-util/nm-setting-olpc-mesh.c:145
#: ../libnm-util/nm-setting-wireless.c:746
#, c-format
msgid "'%d' is not a valid channel"
msgstr "'%d' 不是合於規定的頻道"

#: ../libnm-util/nm-setting-ppp.c:390
#, c-format
msgid "'%d' is out of valid range <128-16384>"
msgstr "'%d' 落於範圍 <128-16384> 之外"

#: ../libnm-util/nm-setting-ppp.c:403
#, c-format
msgid "setting this property requires non-zero '%s' property"
msgstr "設定此屬性需要非零值的 '%s' 屬性"

#: ../libnm-util/nm-setting-vlan.c:497
#, c-format
msgid "'%s' value doesn't match '%s=%s'"
msgstr "'%s' 的值與 '%s=%s' 不符"

#: ../libnm-util/nm-setting-vlan.c:508
#, c-format
msgid "'%s' is neither an UUID nor an interface name"
msgstr "'%s' 既不是 UUID 也不是介面名稱"

#: ../libnm-util/nm-setting-vlan.c:521
#, c-format
msgid "property is not specified and neither is '%s:%s'"
msgstr "並未指定屬性，也不是 '%s:%s'"

#: ../libnm-util/nm-setting-vlan.c:534
msgid "flags are invalid"
msgstr "旗標不合規定"

#: ../libnm-util/nm-setting-wired.c:562
#, c-format
msgid "'%s' is not a valid ethernet port value"
msgstr "'%s' 不是合於規定的乙太網路連接埠之值"

#: ../libnm-util/nm-setting-wired.c:572
#, c-format
msgid "'%s' is not a valid duplex value"
msgstr "「%s」不是個有效的雙工值"

#: ../libnm-util/nm-setting-wired.c:582 ../libnm-util/nm-setting-wired.c:640
msgid "is not a valid MAC address"
msgstr "不是個有效的 MAC 位址"

#: ../libnm-util/nm-setting-wired.c:595
#: ../libnm-util/nm-setting-wireless.c:787
#: ../libnm-util/nm-setting-wireless.c:801
#, c-format
msgid "'%s' is not a valid MAC address"
msgstr "「%s」不是個有效的 MAC 位址"

#: ../libnm-util/nm-setting-wired.c:629
#, c-format
msgid "invalid '%s' or its value '%s'"
msgstr "無效的「%s」或是它的值「%s」無效"

#: ../libnm-util/nm-setting-wireless-security.c:816
#, c-format
msgid "'%s' security requires '%s=%s'"
msgstr "「%s」安全性需要「%s=%s」"

#: ../libnm-util/nm-setting-wireless-security.c:845
#, c-format
msgid "'%s' security requires '%s' setting presence"
msgstr "「%s」安全性需要「%s」設定存在"

#: ../libnm-util/nm-setting-wireless-security.c:866
#, c-format
msgid "'%d' value is out of range <0-3>"
msgstr "「%d」值不在範圍內 <0-3>"

#: ../libnm-util/nm-setting-wireless-security.c:963
#, c-format
msgid "'%s' connections require '%s' in this property"
msgstr "「%s」連線需要「%s」在此內容中"

#: ../libnm-util/nm-setting-wireless-security.c:993
#, c-format
msgid "'%s' can only be used with '%s=%s' (WEP)"
msgstr "「%s」只能與「%s=%s」（WEP）搭配使用"

#: ../libnm-util/nm-setting-wireless.c:715
#, c-format
msgid "'%s' is not a valid Wi-Fi mode"
msgstr "「%s」不是個有效的 Wi-Fi 模式"

#: ../libnm-util/nm-setting-wireless.c:725
#, c-format
msgid "'%s' is not a valid band"
msgstr "「%s」不是個有效的頻道"

#: ../libnm-util/nm-setting-wireless.c:735
#, c-format
msgid "requires setting '%s' property"
msgstr "需要設定「%s」內容"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:1
msgid "Enable or disable system networking"
msgstr "啟用或停用系統網路"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:2
msgid "System policy prevents enabling or disabling system networking"
msgstr "系統政策防止啟用或停用系統網路作業"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:3
msgid ""
"Put NetworkManager to sleep or wake it up (should only be used by system "
"power management)"
msgstr "將 NetworkManager 導入睡眠模式或將它啟用（只應被系統電源管理所使用）"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:4
msgid "System policy prevents putting NetworkManager to sleep or waking it up"
msgstr "系統政策防止將 NetworkManager 導入睡眠模式或將其啟用"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:5
msgid "Enable or disable WiFi devices"
msgstr "啟用或停用 WiFi 裝置"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:6
msgid "System policy prevents enabling or disabling WiFi devices"
msgstr "系統政策防止啟用或停用 WiFi 裝置"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:7
msgid "Enable or disable mobile broadband devices"
msgstr "啟用或停用行動寬頻裝置"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:8
msgid "System policy prevents enabling or disabling mobile broadband devices"
msgstr "系統政策防止啟用或停用行動寬頻裝置"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:9
msgid "Enable or disable WiMAX mobile broadband devices"
msgstr "啟用或停用 WiMAX 行動寬頻裝置"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:10
msgid ""
"System policy prevents enabling or disabling WiMAX mobile broadband devices"
msgstr "系統政策防止啟用或停用 WiMAX 行動寬頻裝置"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:11
msgid "Allow control of network connections"
msgstr "允許控制網路連線"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:12
msgid "System policy prevents control of network connections"
msgstr "系統政策防止網路連線的控制"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:13
msgid "Connection sharing via a protected WiFi network"
msgstr "透過受保護的 WiFi 網路共享連線"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:14
msgid ""
"System policy prevents sharing connections via a protected WiFi network"
msgstr "系統政策讓您無法透過受保護的 WiFi 網路共享連結"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:15
msgid "Connection sharing via an open WiFi network"
msgstr "透過開放的 WiFi 網路共享連線"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:16
msgid "System policy prevents sharing connections via an open WiFi network"
msgstr "系統政策讓您無法透過開放的 WiFi 網路共享連線"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:17
msgid "Modify personal network connections"
msgstr "修改個人網路連線"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:18
msgid "System policy prevents modification of personal network settings"
msgstr "系統政策防止修改個人網路設定"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:19
msgid "Modify network connections for all users"
msgstr "修改所有使用者的網路連線"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:20
msgid "System policy prevents modification of network settings for all users"
msgstr "系統政策防止修改所有使用者的網路設定"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:21
msgid "Modify persistent system hostname"
msgstr "修改永久系統的主機名稱"

#: ../policy/org.freedesktop.NetworkManager.policy.in.in.h:22
msgid "System policy prevents modification of the persistent system hostname"
msgstr "系統政策讓您無法修改永久的系統主機名稱"

#: ../src/main.c:154
#, c-format
msgid "Opening %s failed: %s\n"
msgstr "開啟 %s 失敗：%s\n"

#: ../src/main.c:160
#, c-format
msgid "Writing to %s failed: %s\n"
msgstr "寫入 %s 失敗：%s\n"

#: ../src/main.c:165
#, c-format
msgid "Closing %s failed: %s\n"
msgstr "關閉 %s 失敗：%s\n"

#: ../src/main.c:208
#, c-format
msgid "NetworkManager is already running (pid %ld)\n"
msgstr "NetworkManager 已在執行（pid %ld）\n"

#: ../src/main.c:329
msgid "Print NetworkManager version and exit"
msgstr "印出 NetworkManager 的版本並退出"

#: ../src/main.c:330
msgid "Don't become a daemon"
msgstr "不要成為 daemon"

#: ../src/main.c:331
msgid "Don't become a daemon, and log to stderr"
msgstr "不要成為 daemon，並記錄至 stderr"

#: ../src/main.c:332
#, c-format
msgid "Log level: one of [%s]"
msgstr "日誌等級：[%s] 之一"

#: ../src/main.c:334
#, c-format
msgid "Log domains separated by ',': any combination of [%s]"
msgstr "以「,」區隔開來的日誌區域：任何 [%s] 的組合"

#: ../src/main.c:336
msgid "Make all warnings fatal"
msgstr "使所有警告表示嚴重錯誤"

#: ../src/main.c:337
msgid "Specify the location of a PID file"
msgstr "指定 PID 檔案的位置"

#: ../src/main.c:337
msgid "filename"
msgstr "檔案名稱"

#: ../src/main.c:338
msgid "State file location"
msgstr "指定檔案位置"

#: ../src/main.c:338
msgid "/path/to/state.file"
msgstr "/path/to/state.file"

#: ../src/main.c:364
#, c-format
msgid "GModules are not supported on your platform!\n"
msgstr "您的平台不支援 GModules！\n"

#: ../src/main.c:369
#, c-format
msgid "You must be root to run NetworkManager!\n"
msgstr "您必須成為 root 才能執行 NetworkManager！\n"

#: ../src/main.c:392
msgid ""
"NetworkManager monitors all network connections and automatically\n"
"chooses the best connection to use.  It also allows the user to\n"
"specify wireless access points which wireless cards in the computer\n"
"should associate with."
msgstr "NetworkManager 會監控所有網路連線並自動\n"
"選擇最佳的連線。它也能允許使用者指定\n"
"電腦中的無線網路卡應與哪個\n"
"無線存取點相聯。"

#: ../src/main.c:398
#, c-format
msgid "Invalid option.  Please use --help to see a list of valid options.\n"
msgstr "無效的選項。請使用 --help 來查看有效選項的清單。\n"

#: ../src/main.c:412
#, c-format
msgid "%s.  Please use --help to see a list of valid options.\n"
msgstr "%s。請使用 --help 來查看有效選項的清單。\n"

#: ../src/main.c:417
#, c-format
msgid "Ignoring unrecognized log domain(s) '%s' passed on command line.\n"
msgstr "即將忽略傳送至指令列上的日誌區域「%s」。\n"

#: ../src/main.c:468
#, c-format
msgid "Failed to read configuration: (%d) %s\n"
msgstr "無法讀取配置：（%d）%s\n"

#: ../src/main.c:482
#, c-format
msgid "Error in configuration file: %s.\n"
msgstr "配置檔案錯誤：%s。\n"

#: ../src/main.c:487
#, c-format
msgid "Ignoring unrecognized log domain(s) '%s' from config files.\n"
msgstr "正在忽略來自於配置檔案中無法辨識的日誌區域「%s」。\n"

#: ../src/main.c:495
#, c-format
msgid "State file %s parsing failed: (%d) %s\n"
msgstr "狀態檔案 %s 叵析失敗：（%d）%s\n"

#: ../src/main.c:508
#, c-format
msgid "Could not daemonize: %s [error %u]\n"
msgstr "無法成為 daemon：%s [error %u]\n"

#: ../src/bluez-manager/nm-bluez-device.c:198
#, c-format
msgid "%s Network"
msgstr "%s 網路"

#: ../src/dhcp-manager/nm-dhcp-dhclient-utils.c:143
msgid "# Created by NetworkManager\n"
msgstr "# Created by NetworkManager\n"

#: ../src/dhcp-manager/nm-dhcp-dhclient-utils.c:150
#, c-format
msgid "# Merged from %s\n"
"\n"
msgstr "# Merged from %s\n"
"\n"

#: ../src/dhcp-manager/nm-dhcp-manager.c:313
msgid "no usable DHCP client could be found."
msgstr "找不到可重複使用的 DHCP 用戶端。"

#: ../src/dhcp-manager/nm-dhcp-manager.c:322
msgid "'dhclient' could be found."
msgstr "找不到「dhclient」。"

#: ../src/dhcp-manager/nm-dhcp-manager.c:332
msgid "'dhcpcd' could be found."
msgstr "找不到「dhcpcd」。"

#: ../src/dhcp-manager/nm-dhcp-manager.c:340
#, c-format
msgid "unsupported DHCP client '%s'"
msgstr "不支援的 DHCP 用戶端「%s」"

#: ../src/dns-manager/nm-dns-manager.c:401
msgid "NOTE: the libc resolver may not support more than 3 nameservers."
msgstr "注意：libc 解析器不支援 3 個以上的名稱伺服器。"

#: ../src/dns-manager/nm-dns-manager.c:403
msgid "The nameservers listed below may not be recognized."
msgstr "下面列出的名稱伺服器可能不會被辨識。"

#: ../src/logging/nm-logging.c:149
#, c-format
msgid "Unknown log level '%s'"
msgstr "不明日誌層級「%s」"

#: ../src/logging/nm-logging.c:226
#, c-format
msgid "Unknown log domain '%s'"
msgstr "不明日誌網域「%s」"

#: ../src/config/nm-config.c:271
msgid "Config file location"
msgstr "配置檔案位置"

#: ../src/config/nm-config.c:271
msgid "/path/to/config.file"
msgstr "/path/to/config.file"

#: ../src/config/nm-config.c:272
msgid "Config directory location"
msgstr "配置目錄位置"

#: ../src/config/nm-config.c:272
msgid "/path/to/config/dir"
msgstr "/path/to/config/dir"

#: ../src/config/nm-config.c:274
msgid "List of plugins separated by ','"
msgstr "外掛程式清單，以「,」區隔開。"

#: ../src/config/nm-config.c:274
msgid "plugin1,plugin2"
msgstr "plugin1,plugin2"

#: ../src/config/nm-config.c:277
msgid "An http(s) address for checking internet connectivity"
msgstr "檢查網際網路連線的 http 位址"

#: ../src/config/nm-config.c:278
msgid "The interval between connectivity checks (in seconds)"
msgstr "連線檢查之間的間隔（秒）"

#: ../src/config/nm-config.c:279
msgid "The expected start of the response"
msgstr "預期的反應起始"

#: ../src/config/nm-config.c:279
msgid "Bingo!"
msgstr "正確！"

#: ../src/modem-manager/nm-modem-broadband.c:459
#: ../src/modem-manager/nm-modem-old.c:864 ../src/devices/nm-device-bt.c:333
#, c-format
msgid "GSM connection %d"
msgstr "GSM 連線 %d"

#: ../src/modem-manager/nm-modem-broadband.c:481
#: ../src/modem-manager/nm-modem-old.c:891 ../src/devices/nm-device-bt.c:337
#, c-format
msgid "CDMA connection %d"
msgstr "CDMA 連線 %d"

#: ../src/devices/nm-device-bond.c:146 ../tui/nm-editor-utils.c:204
#, c-format
msgid "Bond connection %d"
msgstr "Bond 連線 %d"

#: ../src/devices/nm-device-adsl.c:150
#, c-format
msgid "ADSL connection %d"
msgstr "ADSL 連線 %d"

#: ../src/devices/nm-device-bridge.c:143 ../tui/nm-editor-utils.c:214
#, c-format
msgid "Bridge connection %d"
msgstr "橋接連線 %d"

#: ../src/devices/nm-device-bt.c:308
#, c-format
msgid "PAN connection %d"
msgstr "PAN 連線 %d"

#: ../src/devices/nm-device-bt.c:341
#, c-format
msgid "DUN connection %d"
msgstr "DUN 連線 %d"

#: ../src/devices/nm-device-ethernet.c:1254
#, c-format
msgid "PPPoE connection %d"
msgstr "PPPoE 連線 %d"

#: ../src/devices/nm-device-ethernet.c:1254
#: ../src/settings/nm-settings-utils.c:50
#, c-format
msgid "Wired connection %d"
msgstr "有線連線 %d"

#: ../src/devices/nm-device-infiniband.c:270 ../tui/nm-editor-utils.c:177
#, c-format
msgid "InfiniBand connection %d"
msgstr "InfiniBand 連線 %d"

#: ../src/devices/nm-device-olpc-mesh.c:242
#, c-format
msgid "Mesh %d"
msgstr "Mesh 連線 %d"

#: ../src/devices/nm-device-team.c:158 ../tui/nm-editor-utils.c:223
#, c-format
msgid "Team connection %d"
msgstr "Team 連線 %d"

#: ../src/devices/nm-device-vlan.c:255 ../tui/nm-editor-utils.c:231
#, c-format
msgid "VLAN connection %d"
msgstr "VLAN 連線 %d"

#: ../src/nm-manager.c:3420 ../tui/nm-editor-utils.c:246
#, c-format
msgid "VPN connection %d"
msgstr "VPN 連線 %d"

#: ../src/nm-netlink-monitor.c:219
msgid "error occurred while waiting for data on socket"
msgstr "等待 socket 上的資料時發生錯誤"

#: ../src/nm-netlink-monitor.c:240
#, c-format
msgid "error processing netlink message: %s"
msgstr "處理 netlink 訊息時發生錯誤：%s"

#: ../src/nm-netlink-monitor.c:264
#, c-format
msgid "unable to connect to netlink for monitoring link status: %s"
msgstr "無法連結 netlink 以監控連線狀態：%s"

#: ../src/nm-netlink-monitor.c:275
#, c-format
msgid "unable to enable netlink handle credential passing: %s"
msgstr "無法啟用 netlink handle credential passing：%s"

#: ../src/nm-netlink-monitor.c:319 ../src/nm-netlink-monitor.c:381
#, c-format
msgid "unable to allocate netlink handle for monitoring link status: %s"
msgstr "無法配置 netlink 處理器以監控連線狀態：%s"

#: ../src/nm-netlink-monitor.c:469
#, c-format
msgid "unable to join netlink group: %s"
msgstr "無法加入 netlink 群組：%s"

#: ../src/nm-sleep-monitor-systemd.c:116
msgid "NetworkManager needs to turn off networks"
msgstr "NetworkManager 需要關閉網路"

#: ../src/settings/plugins/ifcfg-rh/reader.c:115
msgid "System"
msgstr "系統"

#: ../src/settings/plugins/ifcfg-rh/reader.c:4158 ../tui/nm-editor-utils.c:200
#: ../tui/nm-ui-utils.c:349 ../tui/nm-ui-utils.c:574
msgid "Bond"
msgstr "Bond"

#: ../src/settings/plugins/ifcfg-rh/reader.c:4240 ../tui/nm-editor-utils.c:218
#: ../tui/nm-ui-utils.c:351 ../tui/nm-ui-utils.c:576
msgid "Team"
msgstr "Team"

#: ../src/settings/plugins/ifcfg-rh/reader.c:4424 ../tui/nm-editor-utils.c:209
#: ../tui/nm-ui-utils.c:353 ../tui/nm-ui-utils.c:578
msgid "Bridge"
msgstr "橋接"

#: ../test/nm-online.c:73
#, c-format
msgid "\rConnecting"
msgstr "正在連線"

#: ../test/nm-online.c:104
msgid ""
"Time to wait for a connection, in seconds (without the option, default value "
"is 30)"
msgstr "連線的等待時間，以秒為單位（少了此選項，預設值將會是 30）"

#: ../test/nm-online.c:105
msgid "Exit immediately if NetworkManager is not running"
msgstr "若 NetworkManager 沒有在執行的話，即刻退出"

#: ../test/nm-online.c:106
msgid "Don't print anything"
msgstr "不印出任何東西"

#: ../test/nm-online.c:124
msgid ""
"Waits for NetworkManager to finish activating startup network connections."
msgstr "等待 NetworkManager 完成啟用開啟網路連線。"

#: ../test/nm-online.c:131 ../test/nm-online.c:141
msgid "Invalid option.  Please use --help to see a list of valid options."
msgstr "無效的選項。請使用 --help 來查看可用選項的清單。"

#: ../tui/newt/nmt-newt-utils.c:168 ../tui/nmt-editor.c:231
#: ../tui/nmt-password-dialog.c:175 ../tui/nmt-route-editor.c:135
#: ../tui/nmtui-hostname.c:71 ../tui/nmtui.c:120
msgid "OK"
msgstr "確定"

#: ../tui/newt/nmt-newt-utils.c:316 ../tui/newt/nmt-newt-utils.c:348
#, c-format
msgid "Could not create temporary file: %s"
msgstr "無法建立暫時性檔案：%s"

#: ../tui/newt/nmt-newt-utils.c:354
#, c-format
msgid "Editor failed: %s"
msgstr "編輯程式錯誤：%s"

#: ../tui/newt/nmt-newt-utils.c:360
#, c-format
msgid "Could not re-read file: %s"
msgstr "無法重新讀取檔案：%s"

#: ../tui/nm-editor-utils.c:160
#, c-format
msgid "Ethernet connection %d"
msgstr "乙太網路連線 %d"

#: ../tui/nm-editor-utils.c:168
#, c-format
msgid "Wi-Fi connection %d"
msgstr "Wi-Fi 連線 %d"

#: ../tui/nm-editor-utils.c:182 ../tui/nm-ui-utils.c:345
msgid "Mobile Broadband"
msgstr "行動寬頻"

#: ../tui/nm-editor-utils.c:185
#, c-format
msgid "Mobile broadband connection %d"
msgstr "行動寬頻連線 %d"

#: ../tui/nm-editor-utils.c:190
msgid "DSL"
msgstr "DSL"

#: ../tui/nm-editor-utils.c:194
#, c-format
msgid "DSL connection %d"
msgstr "DSL 連線 %d"

#: ../tui/nm-ui-utils.c:316 ../tui/nm-ui-utils.c:385
msgid "Wired"
msgstr "有線網路"

#: ../tui/nm-ui-utils.c:339
msgid "Bluetooth"
msgstr "藍牙"

#: ../tui/nm-ui-utils.c:341
msgid "OLPC Mesh"
msgstr "OLPC Mesh"

#: ../tui/nm-ui-utils.c:343
msgid "WiMAX"
msgstr "WiMAX"

#: ../tui/nm-ui-utils.c:357
msgid "ADSL"
msgstr "ADSL"

#: ../tui/nm-ui-utils.c:420
msgid "PCI"
msgstr "PCI"

#: ../tui/nm-ui-utils.c:422
msgid "USB"
msgstr "USB"

#: ../tui/nm-ui-utils.c:498 ../tui/nm-ui-utils.c:518
#, c-format
msgctxt "long device name"
msgid "%s %s"
msgstr "%s %s"

#: ../tui/nmt-device-entry.c:391
msgid "Select..."
msgstr "選擇..."

#: ../tui/nmt-edit-connection-list.c:129
msgid "Add"
msgstr "新增"

#: ../tui/nmt-edit-connection-list.c:132 ../tui/nmt-page-ip4.c:172
#: ../tui/nmt-page-ip6.c:170 ../tui/nmt-page-team-port.c:110
#: ../tui/nmt-page-team.c:180
msgid "Edit..."
msgstr "編輯..."

#: ../tui/nmt-edit-connection-list.c:135 ../tui/nmtui-edit.c:471
msgid "Delete"
msgstr "刪除"

#: ../tui/nmt-editor.c:81
#, c-format
msgid "Could not create editor for connection '%s' of type '%s'."
msgstr "無法為「%s」連線（類型「%s」）建立編輯程式。"

#: ../tui/nmt-editor.c:85
#, c-format
msgid "Could not create editor for invalid connection '%s'."
msgstr "無法為無效的連線「%s」建立編輯程式。"

#: ../tui/nmt-editor.c:95
msgid "Edit connection"
msgstr "編輯連線"

#: ../tui/nmt-editor.c:134
#, c-format
msgid "Error saving connection: %s"
msgstr "儲存連線錯誤：%s"

#: ../tui/nmt-editor.c:144
#, c-format
msgid "Unable to save connection: %s"
msgstr "無法儲存連線：%s"

#: ../tui/nmt-editor.c:158
#, c-format
msgid "Unable to add new connection: %s"
msgstr "無法新增連線：%s"

#: ../tui/nmt-editor.c:228 ../tui/nmt-password-dialog.c:172
#: ../tui/nmt-route-editor.c:128 ../tui/nmtui-edit.c:201
#: ../tui/nmtui-edit.c:470 ../tui/nmtui-hostname.c:69
msgid "Cancel"
msgstr "取消"

#: ../tui/nmt-mtu-entry.c:86
msgid "(default)"
msgstr "（預設）"

#: ../tui/nmt-mtu-entry.c:88 ../tui/nmt-mtu-entry.c:119
msgid "bytes"
msgstr "位元組"

#: ../tui/nmt-page-bond.c:88
msgid "Round-robin"
msgstr "循環配置資源"

#: ../tui/nmt-page-bond.c:89
msgid "Active Backup"
msgstr "使用中備份工作"

#: ../tui/nmt-page-bond.c:90
msgid "XOR"
msgstr "XOR"

#: ../tui/nmt-page-bond.c:91
msgid "Broadcast"
msgstr "廣播"

#: ../tui/nmt-page-bond.c:92
msgid "802.3ad"
msgstr "802.3ad"

#: ../tui/nmt-page-bond.c:93
msgid "Adaptive Transmit Load Balancing (tlb)"
msgstr "調適型傳輸負載平衡（tlb）"

#: ../tui/nmt-page-bond.c:94
msgid "Adaptive Load Balancing (alb)"
msgstr "調適型負載平衡（alb）"

#: ../tui/nmt-page-bond.c:100
msgid "MII (recommended)"
msgstr "MII（建議）"

#: ../tui/nmt-page-bond.c:101
msgid "ARP"
msgstr "ARP"

#: ../tui/nmt-page-bond.c:359 ../tui/nmt-page-bridge.c:86
#: ../tui/nmt-page-team.c:159
msgid "Slaves"
msgstr "Slave"

#: ../tui/nmt-page-bond.c:371 ../tui/nmt-page-wifi.c:227
msgid "Mode"
msgstr "模式"

#: ../tui/nmt-page-bond.c:377
msgid "Primary"
msgstr "主要"

#: ../tui/nmt-page-bond.c:383
msgid "Link monitoring"
msgstr "連結監控"

#: ../tui/nmt-page-bond.c:389 ../tui/nmt-page-bond.c:396
#: ../tui/nmt-page-bond.c:403 ../tui/nmt-page-bond.c:410
msgctxt "milliseconds"
msgid "ms"
msgstr "ms"

#: ../tui/nmt-page-bond.c:390 ../tui/nmt-page-bond.c:411
msgid "Monitoring frequency"
msgstr "監控頻率"

#: ../tui/nmt-page-bond.c:397
msgid "Link up delay"
msgstr "連線延遲"

#: ../tui/nmt-page-bond.c:404
msgid "Link down delay"
msgstr "斷線延遲"

#: ../tui/nmt-page-bond.c:417
msgid "ARP targets"
msgstr "ARP 目標"

#: ../tui/nmt-page-bridge-port.c:38
msgid "BRIDGE PORT"
msgstr "BRIDGE PORT"

#: ../tui/nmt-page-bridge-port.c:69 ../tui/nmt-page-bridge.c:112
msgid "Priority"
msgstr "優先順序"

#: ../tui/nmt-page-bridge-port.c:75
msgid "Path cost"
msgstr "路徑成本"

#: ../tui/nmt-page-bridge-port.c:77
msgid "Hairpin mode"
msgstr "Hairpin 模式"

#: ../tui/nmt-page-bridge.c:42
msgid "BRIDGE"
msgstr "BRIDGE"

#: ../tui/nmt-page-bridge.c:96 ../tui/nmt-page-bridge.c:121
#: ../tui/nmt-page-bridge.c:131 ../tui/nmt-page-bridge.c:141
msgid "seconds"
msgstr "秒"

#: ../tui/nmt-page-bridge.c:97
msgid "Aging time"
msgstr "過時時間"

#: ../tui/nmt-page-bridge.c:99
msgid "Enable STP (Spanning Tree Protocol)"
msgstr "啟用 STP（Spanning Tree Protocol）"

#: ../tui/nmt-page-bridge.c:122
msgid "Forward delay"
msgstr "轉送延遲"

#: ../tui/nmt-page-bridge.c:132
msgid "Hello time"
msgstr "Hello time"

#: ../tui/nmt-page-bridge.c:142
msgid "Max age"
msgstr "Max age"

#: ../tui/nmt-page-ethernet.c:41
msgid "ETHERNET"
msgstr "ETHERNET"

#: ../tui/nmt-page-ethernet.c:80 ../tui/nmt-page-vlan.c:132
#: ../tui/nmt-page-wifi.c:358
msgid "Cloned MAC address"
msgstr "複製的 MAC 位址"

#: ../tui/nmt-page-infiniband.c:40
msgid "INFINIBAND"
msgstr "INFINIBAND"

#: ../tui/nmt-page-infiniband.c:51
msgid "Datagram"
msgstr "Datagram"

#: ../tui/nmt-page-infiniband.c:52
msgid "Connected"
msgstr "已連線"

#: ../tui/nmt-page-infiniband.c:84
msgid "Transport mode"
msgstr "傳輸模式"

#: ../tui/nmt-page-ip4.c:41
msgid "Disabled"
msgstr "已停用"

#: ../tui/nmt-page-ip4.c:42 ../tui/nmt-page-ip6.c:42
msgid "Automatic"
msgstr "自動"

#: ../tui/nmt-page-ip4.c:43 ../tui/nmt-page-ip6.c:44
msgid "Link-Local"
msgstr "Link-Local"

#: ../tui/nmt-page-ip4.c:44 ../tui/nmt-page-ip6.c:45
msgid "Manual"
msgstr "手動"

#: ../tui/nmt-page-ip4.c:45
msgid "Shared"
msgstr "共享"

#: ../tui/nmt-page-ip4.c:54
msgid "IPv4 CONFIGURATION"
msgstr "IPv4 配置"

#: ../tui/nmt-page-ip4.c:100 ../tui/nmt-page-ip6.c:100
msgid "(No custom routes)"
msgstr "（無自訂路由）"

#: ../tui/nmt-page-ip4.c:103 ../tui/nmt-page-ip6.c:103
#, c-format
msgid "One custom route"
msgid_plural "%d custom routes"
msgstr[0] "%d 個自訂路由"

#: ../tui/nmt-page-ip4.c:141 ../tui/nmt-page-ip6.c:141
msgid "Addresses"
msgstr "位址"

#: ../tui/nmt-page-ip4.c:147 ../tui/nmt-page-ip6.c:147
msgid "Gateway"
msgstr "閘道器"

#: ../tui/nmt-page-ip4.c:153 ../tui/nmt-page-ip6.c:153
msgid "DNS servers"
msgstr "DNS 伺服器"

#: ../tui/nmt-page-ip4.c:159 ../tui/nmt-page-ip6.c:159
msgid "Search domains"
msgstr "搜尋區域"

#: ../tui/nmt-page-ip4.c:174 ../tui/nmt-page-ip6.c:172
msgid "Routing"
msgstr "路由"

#: ../tui/nmt-page-ip4.c:176 ../tui/nmt-page-ip6.c:174
msgid "Never use this network for default route"
msgstr "永不使用此網路來作為預設路由"

#: ../tui/nmt-page-ip4.c:184
msgid "Require IPv4 addressing for this connection"
msgstr "此連線需要 IPv4 位址"

#: ../tui/nmt-page-ip6.c:41
msgid "Ignore"
msgstr "忽略"

#: ../tui/nmt-page-ip6.c:43
msgid "Automatic (DHCP-only)"
msgstr "自動（僅使用 DHCP）"

#: ../tui/nmt-page-ip6.c:54
msgid "IPv6 CONFIGURATION"
msgstr "IPv6 配置"

#: ../tui/nmt-page-ip6.c:182
msgid "Require IPv6 addressing for this connection"
msgstr "此連線需使用 IPv6 位址"

#: ../tui/nmt-page-main.c:134
msgid "Hide"
msgstr "隱藏"

#: ../tui/nmt-page-main.c:134
msgid "Show"
msgstr "顯示"

#: ../tui/nmt-page-main.c:181
msgid "Profile name"
msgstr "設定檔名稱"

#: ../tui/nmt-page-main.c:188
msgid "Device"
msgstr "裝置"

#: ../tui/nmt-page-main.c:252
msgid "Automatically connect"
msgstr "自動連線"

#: ../tui/nmt-page-main.c:258
msgid "Available to all users"
msgstr "所有使用者皆可使用"

#: ../tui/nmt-page-team-port.c:45
msgid "TEAM PORT"
msgstr "團隊連接埠"

#: ../tui/nmt-page-team-port.c:100 ../tui/nmt-page-team.c:170
msgid "JSON configuration"
msgstr "JSON 配置"

#: ../tui/nmt-page-team.c:51
msgid "TEAM"
msgstr "團隊"

#: ../tui/nmt-page-vlan.c:109
msgid "Parent"
msgstr "父"

#: ../tui/nmt-page-vlan.c:124
msgid "VLAN id"
msgstr "VLAN id"

#: ../tui/nmt-page-wifi.c:58
msgid "WI-FI"
msgstr "WI-FI"

#: ../tui/nmt-page-wifi.c:69
msgctxt "Wi-Fi"
msgid "Client"
msgstr "用戶端"

#: ../tui/nmt-page-wifi.c:70
msgid "Access Point"
msgstr "存取點"

#: ../tui/nmt-page-wifi.c:71
msgid "Ad-Hoc Network"
msgstr "臨機操作網路"

#: ../tui/nmt-page-wifi.c:76
msgctxt "Wi-Fi"
msgid "Automatic"
msgstr "自動"

#: ../tui/nmt-page-wifi.c:78
msgid "A (5 GHz)"
msgstr "A (5 GHz)"

#: ../tui/nmt-page-wifi.c:80
msgid "B/G (2.4 GHz)"
msgstr "B/G (2.4 GHz)"

#: ../tui/nmt-page-wifi.c:85
msgctxt "Wi-Fi security"
msgid "None"
msgstr "無"

#: ../tui/nmt-page-wifi.c:86
msgid "WPA & WPA2 Personal"
msgstr "WPA & WPA2 個人用"

#: ../tui/nmt-page-wifi.c:87
msgid "WPA & WPA2 Enterprise"
msgstr "WPA & WPA2 企業級"

#: ../tui/nmt-page-wifi.c:88
msgid "WEP 40/128-bit Key (Hex or ASCII)"
msgstr "WEP 40/128 位元的金鑰（Hex 或 ASCII）"

#: ../tui/nmt-page-wifi.c:89
msgid "WEP 128-bit Passphrase"
msgstr "WEP 128 位元的密碼字串"

#: ../tui/nmt-page-wifi.c:90
msgid "Dynamic WEP (802.1x)"
msgstr "動態 WEP（802.1x）"

#: ../tui/nmt-page-wifi.c:91
msgid "LEAP"
msgstr "LEAP"

#: ../tui/nmt-page-wifi.c:96
msgctxt "WEP key index"
msgid "1 (Default)"
msgstr "1（預設值）"

#: ../tui/nmt-page-wifi.c:97
msgctxt "WEP key index"
msgid "2"
msgstr "2"

#: ../tui/nmt-page-wifi.c:98
msgctxt "WEP key index"
msgid "3"
msgstr "3"

#: ../tui/nmt-page-wifi.c:99
msgctxt "WEP key index"
msgid "4"
msgstr "4"

#: ../tui/nmt-page-wifi.c:104
msgid "Open System"
msgstr "開放系統"

#: ../tui/nmt-page-wifi.c:105
msgid "Shared Key"
msgstr "共享金鑰"

#: ../tui/nmt-page-wifi.c:253
msgid "Channel"
msgstr "頻道"

#: ../tui/nmt-page-wifi.c:258
msgid "Security"
msgstr "安全"

#: ../tui/nmt-page-wifi.c:274 ../tui/nmt-page-wifi.c:305
#: ../tui/nmt-page-wifi.c:335 ../tui/nmt-secret-agent.c:214
#: ../tui/nmt-secret-agent.c:251 ../tui/nmt-secret-agent.c:281
#: ../tui/nmt-secret-agent.c:314 ../tui/nmt-secret-agent.c:380
#: ../tui/nmt-secret-agent.c:393 ../tui/nmt-secret-agent.c:409
msgid "Password"
msgstr "密碼"

#: ../tui/nmt-page-wifi.c:279
msgid "(No support for wpa-enterprise yet...)"
msgstr "（尚不支援 wpa-enterprise）"

#: ../tui/nmt-page-wifi.c:286 ../tui/nmt-secret-agent.c:265
msgid "Key"
msgstr "金鑰"

#: ../tui/nmt-page-wifi.c:289 ../tui/nmt-page-wifi.c:308
msgid "WEP index"
msgstr "WEP 索引"

#: ../tui/nmt-page-wifi.c:297 ../tui/nmt-page-wifi.c:316
msgid "Authentication"
msgstr "身份認證"

#: ../tui/nmt-page-wifi.c:322
msgid "(No support for dynamic-wep yet...)"
msgstr "（尚不支援動態 wep）"

#: ../tui/nmt-page-wifi.c:329 ../tui/nmt-secret-agent.c:209
#: ../tui/nmt-secret-agent.c:304
msgid "Username"
msgstr "使用者名稱"

#: ../tui/nmt-password-fields.c:130
msgid "Ask for this password every time"
msgstr "每次都詢問此密碼"

#: ../tui/nmt-password-fields.c:131
msgid "Show password"
msgstr "顯示密碼"

#: ../tui/nmt-route-table.c:219
msgid "Destination"
msgstr "目的"

#: ../tui/nmt-route-table.c:219
msgid "Prefix"
msgstr "前綴"

#: ../tui/nmt-route-table.c:228
msgid "Next Hop"
msgstr "下一個節點"

#: ../tui/nmt-route-table.c:236
msgid "Metric"
msgstr "公制"

#: ../tui/nmt-route-table.c:256
msgid "No custom routes are defined."
msgstr "沒有已定義的自訂路線。"

#: ../tui/nmt-secret-agent.c:223
msgid "Identity"
msgstr "身份"

#: ../tui/nmt-secret-agent.c:228
msgid "Private key password"
msgstr "私密金鑰的密碼"

#: ../tui/nmt-secret-agent.c:309
msgid "Service"
msgstr "服務"

#: ../tui/nmt-secret-agent.c:340
msgid "Authentication required by wireless network"
msgstr "無線網路所需的身份認證"

#: ../tui/nmt-secret-agent.c:341
#, c-format
msgid ""
"Passwords or encryption keys are required to access the wireless network "
"'%s'."
msgstr "需要密碼或加密金鑰來存取無線網路「%s」。"

#: ../tui/nmt-secret-agent.c:349
msgid "Wired 802.1X authentication"
msgstr "有線網路 802.1X 身份認證"

#: ../tui/nmt-secret-agent.c:352
msgid "Network name"
msgstr "網路名稱"

#: ../tui/nmt-secret-agent.c:359
msgid "DSL authentication"
msgstr "DSL 身份認證"

#: ../tui/nmt-secret-agent.c:367
msgid "PIN code required"
msgstr "需要 PIN 碼"

#: ../tui/nmt-secret-agent.c:368
msgid "PIN code is needed for the mobile broadband device"
msgstr "手機寬頻裝置需要 PIN 碼"

#: ../tui/nmt-secret-agent.c:370
msgid "PIN"
msgstr "PIN"

#: ../tui/nmt-secret-agent.c:376 ../tui/nmt-secret-agent.c:389
#: ../tui/nmt-secret-agent.c:405
msgid "Mobile broadband network password"
msgstr "行動寬頻網路的密碼"

#: ../tui/nmt-secret-agent.c:377 ../tui/nmt-secret-agent.c:390
#: ../tui/nmt-secret-agent.c:406
#, c-format
msgid "A password is required to connect to '%s'."
msgstr "需要密碼才能連線至「%s」。"

#: ../tui/nmt-slave-list.c:138
msgid "Select the type of slave connection you wish to add."
msgstr "選擇您想要新增的 slave 連線類型。"

#: ../tui/nmt-widget-list.c:142
msgid "Add..."
msgstr "新增..."

#: ../tui/nmt-widget-list.c:205
msgid "Remove"
msgstr "移除"

#: ../tui/nmtui-connect.c:82
msgid "Activation failed"
msgstr "啟用失敗"

#: ../tui/nmtui-connect.c:134
msgid "Connecting..."
msgstr "連接中..."

#: ../tui/nmtui-connect.c:159
#, c-format
msgid "Could not activate connection: %s"
msgstr "無法啟動連線：%s"

#: ../tui/nmtui-connect.c:218 ../tui/nmtui-connect.c:274
msgid "Activate"
msgstr "啟動"

#: ../tui/nmtui-connect.c:220
msgid "Deactivate"
msgstr "取消啟動"

#: ../tui/nmtui-connect.c:279 ../tui/nmtui-edit.c:102 ../tui/nmtui.c:114
msgid "Quit"
msgstr "離開"

#: ../tui/nmtui-connect.c:304
#, c-format
msgid "No such connection '%s'"
msgstr "沒有此連線「%s」"

#: ../tui/nmtui-connect.c:306
msgid "Connection is already active"
msgstr "連線已啟用"

#: ../tui/nmtui-edit.c:209
msgid "Create"
msgstr "建立"

#: ../tui/nmtui-edit.c:350
msgid "Select the type of connection you wish to create."
msgstr "選擇您想要建立的連線類型。"

#: ../tui/nmtui-edit.c:357
msgid ""
"If you are creating a VPN, and the VPN connection you wish to create does "
"not appear in the list, you may not have the correct VPN plugin installed."
msgstr "如果您要建立 VPN，但此 VPN 連線沒有出現在清單上，您可能尚未安裝正確的 VPN 外掛程式。"

#: ../tui/nmtui-edit.c:390 ../tui/nmtui-edit.c:406
msgid "New Connection"
msgstr "新連線"

#: ../tui/nmtui-edit.c:443
#, c-format
msgid "Unable to delete connection: %s"
msgstr "無法刪除連線：%s"

#: ../tui/nmtui-edit.c:472
#, c-format
msgid "Are you sure you want to delete the connection '%s'?"
msgstr "確定要刪除連線「%s」？"

#: ../tui/nmtui-edit.c:486
#, c-format
msgid "Could not delete connection: %s"
msgstr "無法刪除連線：%s"

#: ../tui/nmtui-hostname.c:47
msgid "Set Hostname"
msgstr "設定主機名稱"

#: ../tui/nmtui-hostname.c:55
msgid "Hostname"
msgstr "主機名稱"

#: ../tui/nmtui-hostname.c:114
#, c-format
msgid "Set hostname to '%s'"
msgstr "將主機名稱設定為「%s」"

#: ../tui/nmtui-hostname.c:116
#, c-format
msgid "Unable to set hostname: %s"
msgstr "無法設定主機名稱：「%s」"

#: ../tui/nmtui.c:59 ../tui/nmtui.c:62
msgid "connection"
msgstr "連線"

#: ../tui/nmtui.c:60
msgid "Edit a connection"
msgstr "編輯連線"

#: ../tui/nmtui.c:63
msgid "Activate a connection"
msgstr "啟用連線"

#: ../tui/nmtui.c:65
msgid "new hostname"
msgstr "新主機名稱"

#: ../tui/nmtui.c:66
msgid "Set system hostname"
msgstr "設定系統的主機名稱"

#: ../tui/nmtui.c:89
msgid "NetworkManager TUI"
msgstr "NetworkManager 文字介面"

#: ../tui/nmtui.c:97
msgid "Please select an option"
msgstr "請選擇一個選項"

#: ../tui/nmtui.c:154
msgid "Usage"
msgstr "用法"

#: ../tui/nmtui.c:221
msgid "Could not parse arguments"
msgstr "無法剖析引數"

#: ../tui/nmtui.c:229
msgid "NetworkManager is not running."
msgstr "NetworkManager 並不在執行中。"