# encoding: utf-8 # (c) 2015-2016, Jiri Tyr # # GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) from __future__ import absolute_import, division, print_function __metaclass__ = type DOCUMENTATION = ''' --- module: yum_repository author: Jiri Tyr (@jtyr) version_added: '2.1' short_description: Add or remove YUM repositories description: - Add or remove YUM repositories in RPM-based Linux distributions. - If you wish to update an existing repository definition use M(community.general.ini_file) instead. options: async: description: - If set to C(yes) Yum will download packages and metadata from this repo in parallel, if possible. type: bool default: 'yes' bandwidth: description: - Maximum available network bandwidth in bytes/second. Used with the I(throttle) option. - If I(throttle) is a percentage and bandwidth is C(0) then bandwidth throttling will be disabled. If I(throttle) is expressed as a data rate (bytes/sec) then this option is ignored. Default is C(0) (no bandwidth throttling). type: str default: '0' baseurl: description: - URL to the directory where the yum repository's 'repodata' directory lives. - It can also be a list of multiple URLs. - This, the I(metalink) or I(mirrorlist) parameters are required if I(state) is set to C(present). type: list elements: str cost: description: - Relative cost of accessing this repository. Useful for weighing one repo's packages as greater/less than any other. type: str default: '1000' deltarpm_metadata_percentage: description: - When the relative size of deltarpm metadata vs pkgs is larger than this, deltarpm metadata is not downloaded from the repo. Note that you can give values over C(100), so C(200) means that the metadata is required to be half the size of the packages. Use C(0) to turn off this check, and always download metadata. type: str default: '100' deltarpm_percentage: description: - When the relative size of delta vs pkg is larger than this, delta is not used. Use C(0) to turn off delta rpm processing. Local repositories (with file:// I(baseurl)) have delta rpms turned off by default. type: str default: '75' description: description: - A human readable string describing the repository. This option corresponds to the "name" property in the repo file. - This parameter is only required if I(state) is set to C(present). type: str enabled: description: - This tells yum whether or not use this repository. - Yum default value is C(true). type: bool enablegroups: description: - Determines whether yum will allow the use of package groups for this repository. - Yum default value is C(true). type: bool exclude: description: - List of packages to exclude from updates or installs. This should be a space separated list. Shell globs using wildcards (eg. C(*) and C(?)) are allowed. - The list can also be a regular YAML array. type: list elements: str failovermethod: choices: [roundrobin, priority] default: roundrobin description: - C(roundrobin) randomly selects a URL out of the list of URLs to start with and proceeds through each of them as it encounters a failure contacting the host. - C(priority) starts from the first I(baseurl) listed and reads through them sequentially. type: str file: description: - File name without the C(.repo) extension to save the repo in. Defaults to the value of I(name). type: str gpgcakey: description: - A URL pointing to the ASCII-armored CA key file for the repository. type: str gpgcheck: description: - Tells yum whether or not it should perform a GPG signature check on packages. - No default setting. If the value is not set, the system setting from C(/etc/yum.conf) or system default of C(no) will be used. type: bool gpgkey: description: - A URL pointing to the ASCII-armored GPG key file for the repository. - It can also be a list of multiple URLs. type: list elements: str module_hotfixes: description: - Disable module RPM filtering and make all RPMs from the repository available. The default is C(None). version_added: '2.11' type: bool http_caching: description: - Determines how upstream HTTP caches are instructed to handle any HTTP downloads that Yum does. - C(all) means that all HTTP downloads should be cached. - C(packages) means that only RPM package downloads should be cached (but not repository metadata downloads). - C(none) means that no HTTP downloads should be cached. choices: [all, packages, none] type: str default: all include: description: - Include external configuration file. Both, local path and URL is supported. Configuration file will be inserted at the position of the I(include=) line. Included files may contain further include lines. Yum will abort with an error if an inclusion loop is detected. type: str includepkgs: description: - List of packages you want to only use from a repository. This should be a space separated list. Shell globs using wildcards (eg. C(*) and C(?)) are allowed. Substitution variables (e.g. C($releasever)) are honored here. - The list can also be a regular YAML array. type: list elements: str ip_resolve: description: - Determines how yum resolves host names. - C(4) or C(IPv4) - resolve to IPv4 addresses only. - C(6) or C(IPv6) - resolve to IPv6 addresses only. choices: ['4', '6', IPv4, IPv6, whatever] type: str default: whatever keepalive: description: - This tells yum whether or not HTTP/1.1 keepalive should be used with this repository. This can improve transfer speeds by using one connection when downloading multiple files from a repository. type: bool default: 'no' keepcache: description: - Either C(1) or C(0). Determines whether or not yum keeps the cache of headers and packages after successful installation. choices: ['0', '1'] type: str default: '1' metadata_expire: description: - Time (in seconds) after which the metadata will expire. - Default value is 6 hours. type: str default: '21600' metadata_expire_filter: description: - Filter the I(metadata_expire) time, allowing a trade of speed for accuracy if a command doesn't require it. Each yum command can specify that it requires a certain level of timeliness quality from the remote repos. from "I'm about to install/upgrade, so this better be current" to "Anything that's available is good enough". - C(never) - Nothing is filtered, always obey I(metadata_expire). - C(read-only:past) - Commands that only care about past information are filtered from metadata expiring. Eg. I(yum history) info (if history needs to lookup anything about a previous transaction, then by definition the remote package was available in the past). - C(read-only:present) - Commands that are balanced between past and future. Eg. I(yum list yum). - C(read-only:future) - Commands that are likely to result in running other commands which will require the latest metadata. Eg. I(yum check-update). - Note that this option does not override "yum clean expire-cache". choices: [never, 'read-only:past', 'read-only:present', 'read-only:future'] type: str default: 'read-only:present' metalink: description: - Specifies a URL to a metalink file for the repomd.xml, a list of mirrors for the entire repository are generated by converting the mirrors for the repomd.xml file to a I(baseurl). - This, the I(baseurl) or I(mirrorlist) parameters are required if I(state) is set to C(present). type: str mirrorlist: description: - Specifies a URL to a file containing a list of baseurls. - This, the I(baseurl) or I(metalink) parameters are required if I(state) is set to C(present). type: str mirrorlist_expire: description: - Time (in seconds) after which the mirrorlist locally cached will expire. - Default value is 6 hours. type: str default: '21600' name: description: - Unique repository ID. This option builds the section name of the repository in the repo file. - This parameter is only required if I(state) is set to C(present) or C(absent). type: str required: true password: description: - Password to use with the username for basic authentication. type: str priority: description: - Enforce ordered protection of repositories. The value is an integer from 1 to 99. - This option only works if the YUM Priorities plugin is installed. type: str default: '99' protect: description: - Protect packages from updates from other repositories. type: bool default: 'no' proxy: description: - URL to the proxy server that yum should use. Set to C(_none_) to disable the global proxy setting. type: str proxy_password: description: - Password for this proxy. type: str proxy_username: description: - Username to use for proxy. type: str repo_gpgcheck: description: - This tells yum whether or not it should perform a GPG signature check on the repodata from this repository. type: bool default: 'no' reposdir: description: - Directory where the C(.repo) files will be stored. type: path default: /etc/yum.repos.d retries: description: - Set the number of times any attempt to retrieve a file should retry before returning an error. Setting this to C(0) makes yum try forever. type: str default: '10' s3_enabled: description: - Enables support for S3 repositories. - This option only works if the YUM S3 plugin is installed. type: bool default: 'no' skip_if_unavailable: description: - If set to C(yes) yum will continue running if this repository cannot be contacted for any reason. This should be set carefully as all repos are consulted for any given command. type: bool default: 'no' ssl_check_cert_permissions: description: - Whether yum should check the permissions on the paths for the certificates on the repository (both remote and local). - If we can't read any of the files then yum will force I(skip_if_unavailable) to be C(yes). This is most useful for non-root processes which use yum on repos that have client cert files which are readable only by root. type: bool default: 'no' sslcacert: description: - Path to the directory containing the databases of the certificate authorities yum should use to verify SSL certificates. type: str aliases: [ ca_cert ] sslclientcert: description: - Path to the SSL client certificate yum should use to connect to repos/remote sites. type: str aliases: [ client_cert ] sslclientkey: description: - Path to the SSL client key yum should use to connect to repos/remote sites. type: str aliases: [ client_key ] sslverify: description: - Defines whether yum should verify SSL certificates/hosts at all. type: bool default: 'yes' aliases: [ validate_certs ] state: description: - State of the repo file. choices: [absent, present] type: str default: present throttle: description: - Enable bandwidth throttling for downloads. - This option can be expressed as a absolute data rate in bytes/sec. An SI prefix (k, M or G) may be appended to the bandwidth value. type: str timeout: description: - Number of seconds to wait for a connection before timing out. type: str default: '30' ui_repoid_vars: description: - When a repository id is displayed, append these yum variables to the string if they are used in the I(baseurl)/etc. Variables are appended in the order listed (and found). type: str default: releasever basearch username: description: - Username to use for basic authentication to a repo or really any url. type: str extends_documentation_fragment: - action_common_attributes - files attributes: check_mode: support: full diff_mode: support: full platform: platforms: rhel notes: - All comments will be removed if modifying an existing repo file. - Section order is preserved in an existing repo file. - Parameters in a section are ordered alphabetically in an existing repo file. - The repo file will be automatically deleted if it contains no repository. - When removing a repository, beware that the metadata cache may still remain on disk until you run C(yum clean all). Use a notification handler for this. - "The C(params) parameter was removed in Ansible 2.5 due to circumventing Ansible's parameter handling" ''' EXAMPLES = ''' - name: Add repository ansible.builtin.yum_repository: name: epel description: EPEL YUM repo baseurl: https://download.fedoraproject.org/pub/epel/$releasever/$basearch/ - name: Add multiple repositories into the same file (1/2) ansible.builtin.yum_repository: name: epel description: EPEL YUM repo file: external_repos baseurl: https://download.fedoraproject.org/pub/epel/$releasever/$basearch/ gpgcheck: no - name: Add multiple repositories into the same file (2/2) ansible.builtin.yum_repository: name: rpmforge description: RPMforge YUM repo file: external_repos baseurl: http://apt.sw.be/redhat/el7/en/$basearch/rpmforge mirrorlist: http://mirrorlist.repoforge.org/el7/mirrors-rpmforge enabled: no # Handler showing how to clean yum metadata cache - name: yum-clean-metadata ansible.builtin.command: yum clean metadata args: warn: no # Example removing a repository and cleaning up metadata cache - name: Remove repository (and clean up left-over metadata) ansible.builtin.yum_repository: name: epel state: absent notify: yum-clean-metadata - name: Remove repository from a specific repo file ansible.builtin.yum_repository: name: epel file: external_repos state: absent ''' RETURN = ''' repo: description: repository name returned: success type: str sample: "epel" state: description: state of the target, after execution returned: success type: str sample: "present" ''' import os from ansible.module_utils.basic import AnsibleModule from ansible.module_utils.six.moves import configparser from ansible.module_utils._text import to_native class YumRepo(object): # Class global variables module = None params = None section = None repofile = configparser.RawConfigParser() # List of parameters which will be allowed in the repo file output allowed_params = [ 'async', 'bandwidth', 'baseurl', 'cost', 'deltarpm_metadata_percentage', 'deltarpm_percentage', 'enabled', 'enablegroups', 'exclude', 'failovermethod', 'gpgcakey', 'gpgcheck', 'gpgkey', 'module_hotfixes', 'http_caching', 'include', 'includepkgs', 'ip_resolve', 'keepalive', 'keepcache', 'metadata_expire', 'metadata_expire_filter', 'metalink', 'mirrorlist', 'mirrorlist_expire', 'name', 'password', 'priority', 'protect', 'proxy', 'proxy_password', 'proxy_username', 'repo_gpgcheck', 'retries', 's3_enabled', 'skip_if_unavailable', 'sslcacert', 'ssl_check_cert_permissions', 'sslclientcert', 'sslclientkey', 'sslverify', 'throttle', 'timeout', 'ui_repoid_vars', 'username'] # List of parameters which can be a list list_params = ['exclude', 'includepkgs'] def __init__(self, module): # To be able to use fail_json self.module = module # Shortcut for the params self.params = self.module.params # Section is always the repoid self.section = self.params['repoid'] # Check if repo directory exists repos_dir = self.params['reposdir'] if not os.path.isdir(repos_dir): self.module.fail_json( msg="Repo directory '%s' does not exist." % repos_dir) # Set dest; also used to set dest parameter for the FS attributes self.params['dest'] = os.path.join( repos_dir, "%s.repo" % self.params['file']) # Read the repo file if it exists if os.path.isfile(self.params['dest']): self.repofile.read(self.params['dest']) def add(self): # Remove already existing repo and create a new one if self.repofile.has_section(self.section): self.repofile.remove_section(self.section) # Add section self.repofile.add_section(self.section) # Baseurl/mirrorlist is not required because for removal we need only # the repo name. This is why we check if the baseurl/mirrorlist is # defined. req_params = (self.params['baseurl'], self.params['metalink'], self.params['mirrorlist']) if req_params == (None, None, None): self.module.fail_json( msg="Parameter 'baseurl', 'metalink' or 'mirrorlist' is required for " "adding a new repo.") # Set options for key, value in sorted(self.params.items()): if key in self.list_params and isinstance(value, list): # Join items into one string for specific parameters value = ' '.join(value) elif isinstance(value, bool): # Convert boolean value to integer value = int(value) # Set the value only if it was defined (default is None) if value is not None and key in self.allowed_params: self.repofile.set(self.section, key, value) def save(self): if len(self.repofile.sections()): # Write data into the file try: with open(self.params['dest'], 'w') as fd: self.repofile.write(fd) except IOError as e: self.module.fail_json( msg="Problems handling file %s." % self.params['dest'], details=to_native(e)) else: # Remove the file if there are not repos try: os.remove(self.params['dest']) except OSError as e: self.module.fail_json( msg=( "Cannot remove empty repo file %s." % self.params['dest']), details=to_native(e)) def remove(self): # Remove section if exists if self.repofile.has_section(self.section): self.repofile.remove_section(self.section) def dump(self): repo_string = "" # Compose the repo file for section in sorted(self.repofile.sections()): repo_string += "[%s]\n" % section for key, value in sorted(self.repofile.items(section)): repo_string += "%s = %s\n" % (key, value) repo_string += "\n" return repo_string def main(): # Module settings argument_spec = dict( bandwidth=dict(), baseurl=dict(type='list', elements='str'), cost=dict(), deltarpm_metadata_percentage=dict(), deltarpm_percentage=dict(), description=dict(), enabled=dict(type='bool'), enablegroups=dict(type='bool'), exclude=dict(type='list', elements='str'), failovermethod=dict(choices=['roundrobin', 'priority']), file=dict(), gpgcakey=dict(no_log=False), gpgcheck=dict(type='bool'), gpgkey=dict(type='list', elements='str', no_log=False), module_hotfixes=dict(type='bool'), http_caching=dict(choices=['all', 'packages', 'none']), include=dict(), includepkgs=dict(type='list', elements='str'), ip_resolve=dict(choices=['4', '6', 'IPv4', 'IPv6', 'whatever']), keepalive=dict(type='bool'), keepcache=dict(choices=['0', '1']), metadata_expire=dict(), metadata_expire_filter=dict( choices=[ 'never', 'read-only:past', 'read-only:present', 'read-only:future']), metalink=dict(), mirrorlist=dict(), mirrorlist_expire=dict(), name=dict(required=True), params=dict(type='dict'), password=dict(no_log=True), priority=dict(), protect=dict(type='bool'), proxy=dict(), proxy_password=dict(no_log=True), proxy_username=dict(), repo_gpgcheck=dict(type='bool'), reposdir=dict(default='/etc/yum.repos.d', type='path'), retries=dict(), s3_enabled=dict(type='bool'), skip_if_unavailable=dict(type='bool'), sslcacert=dict(aliases=['ca_cert']), ssl_check_cert_permissions=dict(type='bool'), sslclientcert=dict(aliases=['client_cert']), sslclientkey=dict(aliases=['client_key'], no_log=False), sslverify=dict(type='bool', aliases=['validate_certs']), state=dict(choices=['present', 'absent'], default='present'), throttle=dict(), timeout=dict(), ui_repoid_vars=dict(), username=dict(), ) argument_spec['async'] = dict(type='bool', default=True) module = AnsibleModule( argument_spec=argument_spec, add_file_common_args=True, supports_check_mode=True, ) # Params was removed # https://meetbot.fedoraproject.org/ansible-meeting/2017-09-28/ansible_dev_meeting.2017-09-28-15.00.log.html if module.params['params']: module.fail_json(msg="The params option to yum_repository was removed in Ansible 2.5 since it circumvents Ansible's option handling") name = module.params['name'] state = module.params['state'] # Check if required parameters are present if state == 'present': if ( module.params['baseurl'] is None and module.params['metalink'] is None and module.params['mirrorlist'] is None): module.fail_json( msg="Parameter 'baseurl', 'metalink' or 'mirrorlist' is required.") if module.params['description'] is None: module.fail_json( msg="Parameter 'description' is required.") # Rename "name" and "description" to ensure correct key sorting module.params['repoid'] = module.params['name'] module.params['name'] = module.params['description'] del module.params['description'] # Change list type to string for baseurl and gpgkey for list_param in ['baseurl', 'gpgkey']: if ( list_param in module.params and module.params[list_param] is not None): module.params[list_param] = "\n".join(module.params[list_param]) # Define repo file name if it doesn't exist if module.params['file'] is None: module.params['file'] = module.params['repoid'] # Instantiate the YumRepo object yumrepo = YumRepo(module) # Get repo status before change diff = { 'before_header': yumrepo.params['dest'], 'before': yumrepo.dump(), 'after_header': yumrepo.params['dest'], 'after': '' } # Perform action depending on the state if state == 'present': yumrepo.add() elif state == 'absent': yumrepo.remove() # Get repo status after change diff['after'] = yumrepo.dump() # Compare repo states changed = diff['before'] != diff['after'] # Save the file only if not in check mode and if there was a change if not module.check_mode and changed: yumrepo.save() # Change file attributes if needed if os.path.isfile(module.params['dest']): file_args = module.load_file_common_arguments(module.params) changed = module.set_fs_attributes_if_different(file_args, changed) # Print status of the change module.exit_json(changed=changed, repo=name, state=state, diff=diff) if __name__ == '__main__': main()