path: root/docs/docsite/rst/user_guide/playbooks_filters.rst

.. _playbooks_filters:

Filters
-------

.. contents:: Topics


Filters in Ansible are from Jinja2, and are used for transforming data inside a template expression.  Jinja2 ships with many filters. See `builtin filters`_ in the official Jinja2 template documentation.

Take into account that templating happens on the Ansible controller, **not** on the task's target host, so filters also execute on the controller as they manipulate local data.

In addition the ones provided by Jinja2, Ansible ships with it's own and allows users to add their own custom filters.

.. _filters_for_formatting_data:

Filters For Formatting Data
```````````````````````````

The following filters will take a data structure in a template and render it in a slightly different format.  These
are occasionally useful for debugging::

    {{ some_variable | to_json }}
    {{ some_variable | to_yaml }}

For human readable output, you can use::

    {{ some_variable | to_nice_json }}
    {{ some_variable | to_nice_yaml }}

It's also possible to change the indentation of both (new in version 2.2)::

    {{ some_variable | to_nice_json(indent=2) }}
    {{ some_variable | to_nice_yaml(indent=8) }}


``to_yaml`` and ``to_nice_yaml`` filters use `PyYAML library`_ which has a default 80 symbol string length limit. That causes unexpected line break after 80th symbol (if there is a space after 80th symbol)
To avoid such behaviour and generate long lines it is possible to use ``width`` option::

    {{ some_variable | to_yaml(indent=8, width=1337) }}
    {{ some_variable | to_nice_yaml(indent=8, width=1337) }}

While it would be nicer to use a construction like ``float("inf")`` instead of hardcoded number, unfortunately the filter doesn't support proxying python functions.
Note that it also supports passing through other YAML parameters. Full list can be found in `PyYAML documentation`_.


Alternatively, you may be reading in some already formatted data::

    {{ some_variable | from_json }}
    {{ some_variable | from_yaml }}

for example::

  tasks:
    - shell: cat /some/path/to/file.json
      register: result

    - set_fact:
        myvar: "{{ result.stdout | from_json }}"


.. versionadded:: 2.7

To parse multi-document yaml strings, the ``from_yaml_all`` filter is provided.
The ``from_yaml_all`` filter will return a generator of parsed yaml documents.

for example::

  tasks:
    - shell: cat /some/path/to/multidoc-file.yaml
      register: result
   - debug:
       msg: '{{ item }}'
    loop: '{{ result.stdout | from_yaml_all | list }}'


.. _forcing_variables_to_be_defined:

Forcing Variables To Be Defined
```````````````````````````````

The default behavior from ansible and ansible.cfg is to fail if variables are undefined, but you can turn this off.

This allows an explicit check with this feature off::

    {{ variable | mandatory }}

The variable value will be used as is, but the template evaluation will raise an error if it is undefined.


.. _defaulting_undefined_variables:

Defaulting Undefined Variables
``````````````````````````````

Jinja2 provides a useful 'default' filter that is often a better approach to failing if a variable is not defined::

    {{ some_variable | default(5) }}

In the above example, if the variable 'some_variable' is not defined, the value used will be 5, rather than an error
being raised.

If you want to use the default value when variables evaluate to false or an empty string you have to set the second parameter to
``true``::

    {{ lookup('env', 'MY_USER') | default('admin', true) }}


.. _omitting_undefined_variables:

Omitting Parameters
```````````````````

As of Ansible 1.8, it is possible to use the default filter to omit module parameters using the special `omit` variable::

    - name: touch files with an optional mode
      file: dest={{ item.path }} state=touch mode={{ item.mode | default(omit) }}
      loop:
        - path: /tmp/foo
        - path: /tmp/bar
        - path: /tmp/baz
          mode: "0444"

For the first two files in the list, the default mode will be determined by the umask of the system as the `mode=`
parameter will not be sent to the file module while the final file will receive the `mode=0444` option.

.. note:: If you are "chaining" additional filters after the `default(omit)` filter, you should instead do something like this:
      `"{{ foo | default(None) | some_filter or omit }}"`. In this example, the default `None` (python null) value will cause the
      later filters to fail, which will trigger the `or omit` portion of the logic. Using omit in this manner is very specific to
      the later filters you're chaining though, so be prepared for some trial and error if you do this.

.. _list_filters:

List Filters
````````````

These filters all operate on list variables.

.. versionadded:: 1.8

To get the minimum value from list of numbers::

    {{ list1 | min }}

To get the maximum value from a list of numbers::

    {{ [3, 4, 2] | max }}

.. versionadded:: 2.5

Flatten a list (same thing the `flatten` lookup does)::

    {{ [3, [4, 2] ] | flatten }}

Flatten only the first level of a list (akin to the `items` lookup)::

    {{ [3, [4, [2]] ] | flatten(levels=1) }}


.. _set_theory_filters:

Set Theory Filters
``````````````````
All these functions return a unique set from sets or lists.

.. versionadded:: 1.4

To get a unique set from a list::

    {{ list1 | unique }}

To get a union of two lists::

    {{ list1 | union(list2) }}

To get the intersection of 2 lists (unique list of all items in both)::

    {{ list1 | intersect(list2) }}

To get the difference of 2 lists (items in 1 that don't exist in 2)::

    {{ list1 | difference(list2) }}

To get the symmetric difference of 2 lists (items exclusive to each list)::

    {{ list1 | symmetric_difference(list2) }}


.. _dict_filter:

Dict Filter
```````````

.. versionadded:: 2.6


To turn a dictionary into a list of items, suitable for looping, use `dict2items`::

    {{ dict | dict2items }}

Which turns::

    tags:
      Application: payment
      Environment: dev

into::

    - key: Application
      value: payment
    - key: Environment
      value: dev

.. versionadded:: 2.8

``dict2items`` accepts 2 keyword arguments, ``key_name`` and ``value_name`` that allow configuration of the names of the keys to use for the transformation::

    {{ files | dict2items(key_name='file', value_name='path') }}

Which turns::

    files:
      users: /etc/passwd
      groups: /etc/group

into::

    - file: users
      path: /etc/passwd
    - file: groups
      path: /etc/group

items2dict filter
`````````````````

.. versionadded:: 2.7

This filter turns a list of dicts with 2 keys, into a dict, mapping the values of those keys into ``key: value`` pairs::

    {{ tags | items2dict }}

Which turns::

    tags:
      - key: Application
        value: payment
      - key: Environment
        value: dev

into::

    Application: payment
    Environment: dev

This is the reverse of the ``dict2items`` filter.

``items2dict`` accepts 2 keyword arguments, ``key_name`` and ``value_name`` that allow configuration of the names of the keys to use for the transformation::

    {{ tags | items2dict(key_name='key', value_name='value') }}


.. _zip_filter:

zip and zip_longest filters
```````````````````````````

.. versionadded:: 2.3

To get a list combining the elements of other lists use ``zip``::

    - name: give me list combo of two lists
      debug:
       msg: "{{ [1,2,3,4,5] | zip(['a','b','c','d','e','f']) | list }}"

    - name: give me shortest combo of two lists
      debug:
        msg: "{{ [1,2,3] | zip(['a','b','c','d','e','f']) | list }}"

To always exhaust all list use ``zip_longest``::

    - name: give me longest combo of three lists , fill with X
      debug:
        msg: "{{ [1,2,3] | zip_longest(['a','b','c','d','e','f'], [21, 22, 23], fillvalue='X') | list }}"


Similarly to the output of the ``items2dict`` filter mentioned above, these filters can be used to contruct a ``dict``::

    {{ dict(keys_list | zip(values_list)) }}

Which turns::

    list_one:
      - one
      - two
    list_two:
      - apple
      - orange

into::

    one: apple
    two: orange

subelements Filter
``````````````````

.. versionadded:: 2.7

Produces a product of an object, and subelement values of that object, similar to the ``subelements`` lookup::

    {{ users | subelements('groups', skip_missing=True) }}

Which turns::

    users:
    - name: alice
      authorized:
      - /tmp/alice/onekey.pub
      - /tmp/alice/twokey.pub
      groups:
      - wheel
      - docker
    - name: bob
      authorized:
      - /tmp/bob/id_rsa.pub
      groups:
      - docker

Into::

    -
      - name: alice
        groups:
        - wheel
        - docker
        authorized:
        - /tmp/alice/onekey.pub
        - /tmp/alice/twokey.pub
      - wheel
    -
      - name: alice
        groups:
        - wheel
        - docker
        authorized:
        - /tmp/alice/onekey.pub
        - /tmp/alice/twokey.pub
      - docker
    -
      - name: bob
        authorized:
        - /tmp/bob/id_rsa.pub
        groups:
        - docker
      - docker

An example of using this filter with ``loop``::

    - name: Set authorized ssh key, extracting just that data from 'users'
      authorized_key:
        user: "{{ item.0.name }}"
        key: "{{ lookup('file', item.1) }}"
      loop: "{{ users | subelements('authorized') }}"

.. _random_mac_filter:

Random Mac Address Filter
`````````````````````````

.. versionadded:: 2.6

This filter can be used to generate a random MAC address from a string prefix.

To get a random MAC address from a string prefix starting with '52:54:00'::

    "{{ '52:54:00' | random_mac }}"
    # => '52:54:00:ef:1c:03'

Note that if anything is wrong with the prefix string, the filter will issue an error.

.. _random_filter:

Random Number Filter
````````````````````

.. versionadded:: 1.6

This filter can be used similar to the default jinja2 random filter (returning a random item from a sequence of
items), but can also generate a random number based on a range.

To get a random item from a list::

    "{{ ['a','b','c'] | random }}"
    # => 'c'

To get a random number between 0 and a specified number::

    "{{ 60 | random }} * * * * root /script/from/cron"
    # => '21 * * * * root /script/from/cron'

Get a random number from 0 to 100 but in steps of 10::

    {{ 101 | random(step=10) }}
    # => 70

Get a random number from 1 to 100 but in steps of 10::

    {{ 101 | random(1, 10) }}
    # => 31
    {{ 101 | random(start=1, step=10) }}
    # => 51

As of Ansible version 2.3, it's also possible to initialize the random number generator from a seed. This way, you can create random-but-idempotent numbers::

    "{{ 60 | random(seed=inventory_hostname) }} * * * * root /script/from/cron"


Shuffle Filter
``````````````

.. versionadded:: 1.8

This filter will randomize an existing list, giving a different order every invocation.

To get a random list from an existing  list::

    {{ ['a','b','c'] | shuffle }}
    # => ['c','a','b']
    {{ ['a','b','c'] | shuffle }}
    # => ['b','c','a']

As of Ansible version 2.3, it's also possible to shuffle a list idempotent. All you need is a seed.::

    {{ ['a','b','c'] | shuffle(seed=inventory_hostname) }}
    # => ['b','a','c']

note that when used with a non 'listable' item it is a noop, otherwise it always returns a list


.. _math_stuff:

Math
````

.. versionadded:: 1.9


Get the logarithm (default is e)::

    {{ myvar | log }}

Get the base 10 logarithm::

    {{ myvar | log(10) }}

Give me the power of 2! (or 5)::

    {{ myvar | pow(2) }}
    {{ myvar | pow(5) }}

Square root, or the 5th::

    {{ myvar | root }}
    {{ myvar | root(5) }}

Note that jinja2 already provides some like abs() and round().

.. json_query_filter:

JSON Query Filter
`````````````````

.. versionadded:: 2.2

Sometimes you end up with a complex data structure in JSON format and you need to extract only a small set of data within it. The **json_query** filter lets you query a complex JSON structure and iterate over it using a loop structure.

.. note:: This filter is built upon **jmespath**, and you can use the same syntax. For examples, see `jmespath examples <http://jmespath.org/examples.html>`_.

Now, let's take the following data structure::

    domain_definition:
        domain:
            cluster:
                - name: "cluster1"
                - name: "cluster2"
            server:
                - name: "server11"
                  cluster: "cluster1"
                  port: "8080"
                - name: "server12"
                  cluster: "cluster1"
                  port: "8090"
                - name: "server21"
                  cluster: "cluster2"
                  port: "9080"
                - name: "server22"
                  cluster: "cluster2"
                  port: "9090"
            library:
                - name: "lib1"
                  target: "cluster1"
                - name: "lib2"
                  target: "cluster2"

To extract all clusters from this structure, you can use the following query::

    - name: "Display all cluster names"
      debug:
        var: item
      loop: "{{ domain_definition | json_query('domain.cluster[*].name') }}"

Same thing for all server names::

    - name: "Display all server names"
      debug:
        var: item
      loop: "{{ domain_definition | json_query('domain.server[*].name') }}"

This example shows ports from cluster1::

    - name: "Display all ports from cluster1"
      debug:
        var: item
      loop: "{{ domain_definition | json_query(server_name_cluster1_query) }}"
      vars:
        server_name_cluster1_query: "domain.server[?cluster=='cluster1'].port"

.. note:: You can use a variable to make the query more readable.

Or, alternatively print out the ports in a comma separated string::

    - name: "Display all ports from cluster1 as a string"
      debug:
        msg: "{{ domain_definition | json_query('domain.server[?cluster==`cluster1`].port') | join(', ') }}"

.. note:: Here, quoting literals using backticks avoids escaping quotes and maintains readability.

Or, using YAML `single quote escaping <http://yaml.org/spec/current.html#id2534365>`_::

    - name: "Display all ports from cluster1"
      debug:
        var: item
      loop: "{{ domain_definition | json_query('domain.server[?cluster==''cluster1''].port') }}"

.. note:: Escaping single quotes within single quotes in YAML is done by doubling the single quote.

In this example, we get a hash map with all ports and names of a cluster::

    - name: "Display all server ports and names from cluster1"
      debug:
        var: item
      loop: "{{ domain_definition | json_query(server_name_cluster1_query) }}"
      vars:
        server_name_cluster1_query: "domain.server[?cluster=='cluster2'].{name: name, port: port}"

.. _ipaddr_filter:

IP address filter
`````````````````

.. versionadded:: 1.9

To test if a string is a valid IP address::

  {{ myvar | ipaddr }}

You can also require a specific IP protocol version::

  {{ myvar | ipv4 }}
  {{ myvar | ipv6 }}

IP address filter can also be used to extract specific information from an IP
address. For example, to get the IP address itself from a CIDR, you can use::

  {{ '192.0.2.1/24' | ipaddr('address') }}

More information about ``ipaddr`` filter and complete usage guide can be found
in :doc:`playbooks_filters_ipaddr`.

.. _network_filters:

Network CLI filters
```````````````````

.. versionadded:: 2.4

To convert the output of a network device CLI command into structured JSON
output, use the ``parse_cli`` filter::

    {{ output | parse_cli('path/to/spec') }}


The ``parse_cli`` filter will load the spec file and pass the command output
through it, returning JSON output. The YAML spec file defines how to parse the CLI output.

The spec file should be valid formatted YAML.  It defines how to parse the CLI
output and return JSON data.  Below is an example of a valid spec file that
will parse the output from the ``show vlan`` command.

.. code-block:: yaml

   ---
   vars:
     vlan:
       vlan_id: "{{ item.vlan_id }}"
       name: "{{ item.name }}"
       enabled: "{{ item.state != 'act/lshut' }}"
       state: "{{ item.state }}"

   keys:
     vlans:
       value: "{{ vlan }}"
       items: "^(?P<vlan_id>\\d+)\\s+(?P<name>\\w+)\\s+(?P<state>active|act/lshut|suspended)"
     state_static:
       value: present


The spec file above will return a JSON data structure that is a list of hashes
with the parsed VLAN information.

The same command could be parsed into a hash by using the key and values
directives.  Here is an example of how to parse the output into a hash
value using the same ``show vlan`` command.

.. code-block:: yaml

   ---
   vars:
     vlan:
       key: "{{ item.vlan_id }}"
       values:
         vlan_id: "{{ item.vlan_id }}"
         name: "{{ item.name }}"
         enabled: "{{ item.state != 'act/lshut' }}"
         state: "{{ item.state }}"

   keys:
     vlans:
       value: "{{ vlan }}"
       items: "^(?P<vlan_id>\\d+)\\s+(?P<name>\\w+)\\s+(?P<state>active|act/lshut|suspended)"
     state_static:
       value: present


Another common use case for parsing CLI commands is to break a large command
into blocks that can be parsed.  This can be done using the ``start_block`` and
``end_block`` directives to break the command into blocks that can be parsed.

.. code-block:: yaml

   ---
   vars:
     interface:
       name: "{{ item[0].match[0] }}"
       state: "{{ item[1].state }}"
       mode: "{{ item[2].match[0] }}"

   keys:
     interfaces:
       value: "{{ interface }}"
       start_block: "^Ethernet.*$"
       end_block: "^$"
       items:
         - "^(?P<name>Ethernet\\d\\/\\d*)"
         - "admin state is (?P<state>.+),"
         - "Port mode is (.+)"


The example above will parse the output of ``show interface`` into a list of
hashes.

The network filters also support parsing the output of a CLI command using the
TextFSM library.  To parse the CLI output with TextFSM use the following
filter::

  {{ output.stdout[0] | parse_cli_textfsm('path/to/fsm') }}

Use of the TextFSM filter requires the TextFSM library to be installed.

Network XML filters
```````````````````

.. versionadded:: 2.5

To convert the XML output of a network device command into structured JSON
output, use the ``parse_xml`` filter::

  {{ output | parse_xml('path/to/spec') }}

The ``parse_xml`` filter will load the spec file and pass the command output
through formatted as JSON.

The spec file should be valid formatted YAML. It defines how to parse the XML
output and return JSON data.

Below is an example of a valid spec file that
will parse the output from the ``show vlan | display xml`` command.

.. code-block:: yaml

   ---
   vars:
     vlan:
       vlan_id: "{{ item.vlan_id }}"
       name: "{{ item.name }}"
       desc: "{{ item.desc }}"
       enabled: "{{ item.state.get('inactive') != 'inactive' }}"
       state: "{% if item.state.get('inactive') == 'inactive'%} inactive {% else %} active {% endif %}"

   keys:
     vlans:
       value: "{{ vlan }}"
       top: configuration/vlans/vlan
       items:
         vlan_id: vlan-id
         name: name
         desc: description
         state: ".[@inactive='inactive']"


The spec file above will return a JSON data structure that is a list of hashes
with the parsed VLAN information.

The same command could be parsed into a hash by using the key and values
directives.  Here is an example of how to parse the output into a hash
value using the same ``show vlan | display xml`` command.

.. code-block:: yaml

   ---
   vars:
     vlan:
       key: "{{ item.vlan_id }}"
       values:
           vlan_id: "{{ item.vlan_id }}"
           name: "{{ item.name }}"
           desc: "{{ item.desc }}"
           enabled: "{{ item.state.get('inactive') != 'inactive' }}"
           state: "{% if item.state.get('inactive') == 'inactive'%} inactive {% else %} active {% endif %}"

   keys:
     vlans:
       value: "{{ vlan }}"
       top: configuration/vlans/vlan
       items:
         vlan_id: vlan-id
         name: name
         desc: description
         state: ".[@inactive='inactive']"


The value of ``top`` is the XPath relative to the XML root node.
In the example XML output given below, the value of ``top`` is ``configuration/vlans/vlan``,
which is an XPath expression relative to the root node (<rpc-reply>).
``configuration`` in the value of ``top`` is the outer most container node, and ``vlan``
is the inner-most container node.

``items`` is a dictionary of key-value pairs that map user-defined names to XPath expressions
that select elements. The Xpath expression is relative to the value of the XPath value contained in ``top``.
For example, the ``vlan_id`` in the spec file is a user defined name and its value ``vlan-id`` is the
relative to the value of XPath in ``top``

Attributes of XML tags can be extracted using XPath expressions. The value of ``state`` in the spec
is an XPath expression used to get the attributes of the ``vlan`` tag in output XML.::

    <rpc-reply>
      <configuration>
        <vlans>
          <vlan inactive="inactive">
           <name>vlan-1</name>
           <vlan-id>200</vlan-id>
           <description>This is vlan-1</description>
          </vlan>
        </vlans>
      </configuration>
    </rpc-reply>

.. note:: For more information on supported XPath expressions, see `<https://docs.python.org/2/library/xml.etree.elementtree.html#xpath-support>`_.

.. _hash_filters:

Hashing filters
```````````````

.. versionadded:: 1.9

To get the sha1 hash of a string::

    {{ 'test1' | hash('sha1') }}

To get the md5 hash of a string::

    {{ 'test1' | hash('md5') }}

Get a string checksum::

    {{ 'test2' | checksum }}

Other hashes (platform dependent)::

    {{ 'test2' | hash('blowfish') }}

To get a sha512 password hash (random salt)::

    {{ 'passwordsaresecret' | password_hash('sha512') }}

To get a sha256 password hash with a specific salt::

    {{ 'secretpassword' | password_hash('sha256', 'mysecretsalt') }}

An idempotent method to generate unique hashes per system is to use a salt that is consistent between runs::

    {{ 'secretpassword' | password_hash('sha512', 65534 | random(seed=inventory_hostname) | string) }}

Hash types available depend on the master system running ansible,
'hash' depends on hashlib password_hash depends on passlib (https://passlib.readthedocs.io/en/stable/lib/passlib.hash.html).

.. versionadded:: 2.7

Some hash types allow providing a rounds parameter::

    {{ 'secretpassword' | password_hash('sha256', 'mysecretsalt', rounds=10000) }}

.. _combine_filter:

Combining hashes/dictionaries
`````````````````````````````

.. versionadded:: 2.0

The `combine` filter allows hashes to be merged. For example, the
following would override keys in one hash::

    {{ {'a':1, 'b':2} | combine({'b':3}) }}

The resulting hash would be::

    {'a':1, 'b':3}

The filter also accepts an optional `recursive=True` parameter to not
only override keys in the first hash, but also recurse into nested
hashes and merge their keys too

.. code-block:: jinja

    {{ {'a':{'foo':1, 'bar':2}, 'b':2} | combine({'a':{'bar':3, 'baz':4}}, recursive=True) }}

This would result in::

    {'a':{'foo':1, 'bar':3, 'baz':4}, 'b':2}

The filter can also take multiple arguments to merge::

    {{ a | combine(b, c, d) }}

In this case, keys in `d` would override those in `c`, which would
override those in `b`, and so on.

This behaviour does not depend on the value of the `hash_behaviour`
setting in `ansible.cfg`.

.. _extract_filter:

Extracting values from containers
`````````````````````````````````

.. versionadded:: 2.1

The `extract` filter is used to map from a list of indices to a list of
values from a container (hash or array)::

    {{ [0,2] | map('extract', ['x','y','z']) | list }}
    {{ ['x','y'] | map('extract', {'x': 42, 'y': 31}) | list }}

The results of the above expressions would be::

    ['x', 'z']
    [42, 31]

The filter can take another argument::

    {{ groups['x'] | map('extract', hostvars, 'ec2_ip_address') | list }}

This takes the list of hosts in group 'x', looks them up in `hostvars`,
and then looks up the `ec2_ip_address` of the result. The final result
is a list of IP addresses for the hosts in group 'x'.

The third argument to the filter can also be a list, for a recursive
lookup inside the container::

    {{ ['a'] | map('extract', b, ['x','y']) | list }}

This would return a list containing the value of `b['a']['x']['y']`.

.. _comment_filter:

Comment Filter
``````````````

.. versionadded:: 2.0

The `comment` filter allows to decorate the text with a chosen comment
style. For example the following::

    {{ "Plain style (default)" | comment }}

will produce this output::

    #
    # Plain style (default)
    #

Similar way can be applied style for C (``//...``), C block
(``/*...*/``), Erlang (``%...``) and XML (``<!--...-->``)::

    {{ "C style" | comment('c') }}
    {{ "C block style" | comment('cblock') }}
    {{ "Erlang style" | comment('erlang') }}
    {{ "XML style" | comment('xml') }}

If you need a specific comment character that is not included by any of the
above, you can customize it with::

  {{ "My Special Case" | comment(decoration="! ") }}

producing::

  !
  ! My Special Case
  !

It is also possible to fully customize the comment style::

    {{ "Custom style" | comment('plain', prefix='#######\n#', postfix='#\n#######\n   ###\n    #') }}

That will create the following output:

.. code-block:: sh

    #######
    #
    # Custom style
    #
    #######
       ###
        #

The filter can also be applied to any Ansible variable. For example to
make the output of the ``ansible_managed`` variable more readable, we can
change the definition in the ``ansible.cfg`` file to this:

.. code-block:: jinja

    [defaults]

    ansible_managed = This file is managed by Ansible.%n
      template: {file}
      date: %Y-%m-%d %H:%M:%S
      user: {uid}
      host: {host}

and then use the variable with the `comment` filter::

    {{ ansible_managed | comment }}

which will produce this output:

.. code-block:: sh

    #
    # This file is managed by Ansible.
    #
    # template: /home/ansible/env/dev/ansible_managed/roles/role1/templates/test.j2
    # date: 2015-09-10 11:02:58
    # user: ansible
    # host: myhost
    #


.. _other_useful_filters:

URL Split Filter
`````````````````

.. versionadded:: 2.4

The ``urlsplit`` filter extracts the fragment, hostname, netloc, password, path, port, query, scheme, and username from an URL. With no arguments, returns a dictionary of all the fields::

    {{ "http://user:password@www.acme.com:9000/dir/index.html?query=term#fragment" | urlsplit('hostname') }}
    # => 'www.acme.com'

    {{ "http://user:password@www.acme.com:9000/dir/index.html?query=term#fragment" | urlsplit('netloc') }}
    # => 'user:password@www.acme.com:9000'

    {{ "http://user:password@www.acme.com:9000/dir/index.html?query=term#fragment" | urlsplit('username') }}
    # => 'user'

    {{ "http://user:password@www.acme.com:9000/dir/index.html?query=term#fragment" | urlsplit('password') }}
    # => 'password'

    {{ "http://user:password@www.acme.com:9000/dir/index.html?query=term#fragment" | urlsplit('path') }}
    # => '/dir/index.html'

    {{ "http://user:password@www.acme.com:9000/dir/index.html?query=term#fragment" | urlsplit('port') }}
    # => '9000'

    {{ "http://user:password@www.acme.com:9000/dir/index.html?query=term#fragment" | urlsplit('scheme') }}
    # => 'http'

    {{ "http://user:password@www.acme.com:9000/dir/index.html?query=term#fragment" | urlsplit('query') }}
    # => 'query=term'

    {{ "http://user:password@www.acme.com:9000/dir/index.html?query=term#fragment" | urlsplit('fragment') }}
    # => 'fragment'

    {{ "http://user:password@www.acme.com:9000/dir/index.html?query=term#fragment" | urlsplit }}
    # =>
    #   {
    #       "fragment": "fragment",
    #       "hostname": "www.acme.com",
    #       "netloc": "user:password@www.acme.com:9000",
    #       "password": "password",
    #       "path": "/dir/index.html",
    #       "port": 9000,
    #       "query": "query=term",
    #       "scheme": "http",
    #       "username": "user"
    #   }


Regular Expression Filters
``````````````````````````

To search a string with a regex, use the "regex_search" filter::

    # search for "foo" in "foobar"
    {{ 'foobar' | regex_search('(foo)') }}

    # will return empty if it cannot find a match
    {{ 'ansible' | regex_search('(foobar)') }}

    # case insensitive search in multiline mode
    {{ 'foo\nBAR' | regex_search("^bar", multiline=True, ignorecase=True) }}


To search for all occurrences of regex matches, use the "regex_findall" filter::

    # Return a list of all IPv4 addresses in the string
    {{ 'Some DNS servers are 8.8.8.8 and 8.8.4.4' | regex_findall('\\b(?:[0-9]{1,3}\\.){3}[0-9]{1,3}\\b') }}


To replace text in a string with regex, use the "regex_replace" filter::

    # convert "ansible" to "able"
    {{ 'ansible' | regex_replace('^a.*i(.*)$', 'a\\1') }}

    # convert "foobar" to "bar"
    {{ 'foobar' | regex_replace('^f.*o(.*)$', '\\1') }}

    # convert "localhost:80" to "localhost, 80" using named groups
    {{ 'localhost:80' | regex_replace('^(?P<host>.+):(?P<port>\\d+)$', '\\g<host>, \\g<port>') }}

    # convert "localhost:80" to "localhost"
    {{ 'localhost:80' | regex_replace(':80') }}

    # add "https://" prefix to each item in a list
    {{ hosts | map('regex_replace', '^(.*)$', 'https://\\1') | list }}

.. note:: Prior to ansible 2.0, if "regex_replace" filter was used with variables inside YAML arguments (as opposed to simpler 'key=value' arguments),
   then you needed to escape backreferences (e.g. ``\\1``) with 4 backslashes (``\\\\``) instead of 2 (``\\``).

.. versionadded:: 2.0

To escape special characters within a regex, use the "regex_escape" filter::

    # convert '^f.*o(.*)$' to '\^f\.\*o\(\.\*\)\$'
    {{ '^f.*o(.*)$' | regex_escape() }}


Kubernetes Filters
``````````````````

Use the "k8s_config_resource_name" filter to obtain the name of a Kubernetes ConfigMap or Secret,
including its hash::

    {{ configmap_resource_definition | k8s_config_resource_name }}

This can then be used to reference hashes in Pod specifications::

    my_secret:
      kind: Secret
      name: my_secret_name

    deployment_resource:
      kind: Deployment
      spec:
        template:
          spec:
            containers:
            - envFrom:
                - secretRef:
                    name: {{ my_secret | k8s_config_resource_name }}

.. versionadded:: 2.8

Other Useful Filters
````````````````````

To add quotes for shell usage::

    - shell: echo {{ string_value | quote }}

To use one value on true and another on false (new in version 1.9)::

    {{ (name == "John") | ternary('Mr','Ms') }}

To use one value on true, one value on false and a third value on null (new in version 2.8)::

   {{ enabled | ternary('no shutdown', 'shutdown', omit) }}

To concatenate a list into a string::

    {{ list | join(" ") }}

To get the last name of a file path, like 'foo.txt' out of '/etc/asdf/foo.txt'::

    {{ path | basename }}

To get the last name of a windows style file path (new in version 2.0)::

    {{ path | win_basename }}

To separate the windows drive letter from the rest of a file path (new in version 2.0)::

    {{ path | win_splitdrive }}

To get only the windows drive letter::

    {{ path | win_splitdrive | first }}

To get the rest of the path without the drive letter::

    {{ path | win_splitdrive | last }}

To get the directory from a path::

    {{ path | dirname }}

To get the directory from a windows path (new version 2.0)::

    {{ path | win_dirname }}

To expand a path containing a tilde (`~`) character (new in version 1.5)::

    {{ path | expanduser }}

To expand a path containing environment variables::

    {{ path | expandvars }}

.. note:: `expandvars` expands local variables; using it on remote paths can lead to errors.

.. versionadded:: 2.6

To get the real path of a link (new in version 1.8)::

    {{ path | realpath }}

To get the relative path of a link, from a start point (new in version 1.7)::

    {{ path | relpath('/etc') }}

To get the root and extension of a path or filename (new in version 2.0)::

    # with path == 'nginx.conf' the return would be ('nginx', '.conf')
    {{ path | splitext }}

To work with Base64 encoded strings::

    {{ encoded | b64decode }}
    {{ decoded | b64encode }}

As of version 2.6, you can define the type of encoding to use, the default is ``utf-8``::

    {{ encoded | b64decode(encoding='utf-16-le') }}
    {{ decoded | b64encode(encoding='utf-16-le') }}

.. versionadded:: 2.6

To create a UUID from a string (new in version 1.9)::

    {{ hostname | to_uuid }}

To cast values as certain types, such as when you input a string as "True" from a vars_prompt and the system
doesn't know it is a boolean value::

   - debug:
       msg: test
     when: some_string_value | bool

.. versionadded:: 1.6

To make use of one attribute from each item in a list of complex variables, use the "map" filter (see the `Jinja2 map() docs`_ for more)::

    # get a comma-separated list of the mount points (e.g. "/,/mnt/stuff") on a host
    {{ ansible_mounts | map(attribute='mount') | join(',') }}

To get date object from string use the `to_datetime` filter, (new in version in 2.2)::

    # Get total amount of seconds between two dates. Default date format is %Y-%m-%d %H:%M:%S but you can pass your own format
    {{ (("2016-08-14 20:00:12" | to_datetime) - ("2015-12-25" | to_datetime('%Y-%m-%d'))).total_seconds()  }}

    # Get remaining seconds after delta has been calculated. NOTE: This does NOT convert years, days, hours, etc to seconds. For that, use total_seconds()
    {{ (("2016-08-14 20:00:12" | to_datetime) - ("2016-08-14 18:00:00" | to_datetime)).seconds  }}
    # This expression evaluates to "12" and not "132". Delta is 2 hours, 12 seconds

    # get amount of days between two dates. This returns only number of days and discards remaining hours, minutes, and seconds
    {{ (("2016-08-14 20:00:12" | to_datetime) - ("2015-12-25" | to_datetime('%Y-%m-%d'))).days  }}

.. versionadded:: 2.4

To format a date using a string (like with the shell date command), use the "strftime" filter::

    # Display year-month-day
    {{ '%Y-%m-%d' | strftime }}

    # Display hour:min:sec
    {{ '%H:%M:%S' | strftime }}

    # Use ansible_date_time.epoch fact
    {{ '%Y-%m-%d %H:%M:%S' | strftime(ansible_date_time.epoch) }}

    # Use arbitrary epoch value
    {{ '%Y-%m-%d' | strftime(0) }}          # => 1970-01-01
    {{ '%Y-%m-%d' | strftime(1441357287) }} # => 2015-09-04

.. note:: To get all string possibilities, check https://docs.python.org/2/library/time.html#time.strftime

Combination Filters
````````````````````

.. versionadded:: 2.3

This set of filters returns a list of combined lists.
To get permutations of a list::

    - name: give me largest permutations (order matters)
      debug:
        msg: "{{ [1,2,3,4,5] | permutations | list }}"

    - name: give me permutations of sets of three
      debug:
        msg: "{{ [1,2,3,4,5] | permutations(3) | list }}"

Combinations always require a set size::

    - name: give me combinations for sets of two
      debug:
        msg: "{{ [1,2,3,4,5] | combinations(2) | list }}"


Also see the :ref:`zip_filter`

Debugging Filters
`````````````````

.. versionadded:: 2.3

Use the ``type_debug`` filter to display the underlying Python type of a variable.
This can be useful in debugging in situations where you may need to know the exact
type of a variable::

    {{ myvar | type_debug }}


A few useful filters are typically added with each new Ansible release.  The development documentation shows
how to extend Ansible filters by writing your own as plugins, though in general, we encourage new ones
to be added to core so everyone can make use of them.

.. _Jinja2 map() docs: http://jinja.pocoo.org/docs/dev/templates/#map

.. _builtin filters: http://jinja.pocoo.org/docs/templates/#builtin-filters

.. _PyYAML library: https://pyyaml.org/

.. _PyYAML documentation: https://pyyaml.org/wiki/PyYAMLDocumentation


.. seealso::

   :doc:`playbooks`
       An introduction to playbooks
   :doc:`playbooks_conditionals`
       Conditional statements in playbooks
   :doc:`playbooks_variables`
       All about variables
   :doc:`playbooks_loops`
       Looping in playbooks
   :doc:`playbooks_reuse_roles`
       Playbook organization by roles
   :doc:`playbooks_best_practices`
       Best practices in playbooks
   `User Mailing List <https://groups.google.com/group/ansible-devel>`_
       Have a question?  Stop by the google group!
   `irc.freenode.net <http://irc.freenode.net>`_
       #ansible IRC chat channel