Initial revision

git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@85154 13f79535-47bb-0310-9956-ffa450edef68

52 files changed, 38906 insertions, 0 deletions

diff --git a/srclib/pcre/AUTHORS b/srclib/pcre/AUTHORS
new file mode 100644
index 0000000000..bfe1b5d8a4
--- /dev/null
+++ b/srclib/pcre/AUTHORS
@@ -0,0 +1,6 @@
+Written by: Philip Hazel <ph10@cam.ac.uk>
+
+University of Cambridge Computing Service,
+Cambridge, England. Phone: +44 1223 334714.
+
+Copyright (c) 1997-2000 University of Cambridge
diff --git a/srclib/pcre/COPYING b/srclib/pcre/COPYING
new file mode 100644
index 0000000000..f305033c16
--- /dev/null
+++ b/srclib/pcre/COPYING
@@ -0,0 +1,32 @@
+PCRE LICENCE
+------------
+
+PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language.
+
+Written by: Philip Hazel <ph10@cam.ac.uk>
+
+University of Cambridge Computing Service,
+Cambridge, England. Phone: +44 1223 334714.
+
+Copyright (c) 1997-2000 University of Cambridge
+
+Permission is granted to anyone to use this software for any purpose on any
+computer system, and to redistribute it freely, subject to the following
+restrictions:
+
+1. This software is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+2. The origin of this software must not be misrepresented, either by
+   explicit claim or by omission.
+
+3. Altered versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+
+4. If PCRE is embedded in any software that is released under the GNU
+   General Purpose Licence (GPL), then the terms of that licence shall
+   supersede any condition above with which it is incompatible.
+
+End
diff --git a/srclib/pcre/ChangeLog b/srclib/pcre/ChangeLog
new file mode 100644
index 0000000000..c594ab50d8
--- /dev/null
+++ b/srclib/pcre/ChangeLog
@@ -0,0 +1,576 @@
+ChangeLog for PCRE
+------------------
+
+
+Version 3.1 09-Feb-00
+---------------------
+
+The only change in this release is the fixing of some bugs in Makefile.in for
+the "install" target:
+
+(1) It was failing to install pcreposix.h.
+
+(2) It was overwriting the pcre.3 man page with the pcreposix.3 man page.
+
+
+Version 3.0 01-Feb-00
+---------------------
+
+1. Add support for the /+ modifier to perltest (to output $` like it does in
+pcretest).
+
+2. Add support for the /g modifier to perltest.
+
+3. Fix pcretest so that it behaves even more like Perl for /g when the pattern
+matches null strings.
+
+4. Fix perltest so that it doesn't do unwanted things when fed an empty
+pattern. Perl treats empty patterns specially - it reuses the most recent
+pattern, which is not what we want. Replace // by /(?#)/ in order to avoid this
+effect.
+
+5. The POSIX interface was broken in that it was just handing over the POSIX
+captured string vector to pcre_exec(), but (since release 2.00) PCRE has
+required a bigger vector, with some working space on the end. This means that
+the POSIX wrapper now has to get and free some memory, and copy the results.
+
+6. Added some simple autoconf support, placing the test data and the
+documentation in separate directories, re-organizing some of the
+information files, and making it build pcre-config (a GNU standard). Also added
+libtool support for building PCRE as a shared library, which is now the
+default.
+
+7. Got rid of the leading zero in the definition of PCRE_MINOR because 08 and
+09 are not valid octal constants. Single digits will be used for minor values
+less than 10.
+
+8. Defined REG_EXTENDED and REG_NOSUB as zero in the POSIX header, so that
+existing programs that set these in the POSIX interface can use PCRE without
+modification.
+
+9. Added a new function, pcre_fullinfo() with an extensible interface. It can
+return all that pcre_info() returns, plus additional data. The pcre_info()
+function is retained for compatibility, but is considered to be obsolete.
+
+10. Added experimental recursion feature (?R) to handle one common case that
+Perl 5.6 will be able to do with (?p{...}).
+
+11. Added support for POSIX character classes like [:alpha:], which Perl is
+adopting.
+
+
+Version 2.08 31-Aug-99
+----------------------
+
+1. When startoffset was not zero and the pattern began with ".*", PCRE was not
+trying to match at the startoffset position, but instead was moving forward to
+the next newline as if a previous match had failed.
+
+2. pcretest was not making use of PCRE_NOTEMPTY when repeating for /g and /G,
+and could get into a loop if a null string was matched other than at the start
+of the subject.
+
+3. Added definitions of PCRE_MAJOR and PCRE_MINOR to pcre.h so the version can
+be distinguished at compile time, and for completeness also added PCRE_DATE.
+
+5. Added Paul Sokolovsky's minor changes to make it easy to compile a Win32 DLL
+in GnuWin32 environments.
+
+
+Version 2.07 29-Jul-99
+----------------------
+
+1. The documentation is now supplied in plain text form and HTML as well as in
+the form of man page sources.
+
+2. C++ compilers don't like assigning (void *) values to other pointer types.
+In particular this affects malloc(). Although there is no problem in Standard
+C, I've put in casts to keep C++ compilers happy.
+
+3. Typo on pcretest.c; a cast of (unsigned char *) in the POSIX regexec() call
+should be (const char *).
+
+4. If NOPOSIX is defined, pcretest.c compiles without POSIX support. This may
+be useful for non-Unix systems who don't want to bother with the POSIX stuff.
+However, I haven't made this a standard facility. The documentation doesn't
+mention it, and the Makefile doesn't support it.
+
+5. The Makefile now contains an "install" target, with editable destinations at
+the top of the file. The pcretest program is not installed.
+
+6. pgrep -V now gives the PCRE version number and date.
+
+7. Fixed bug: a zero repetition after a literal string (e.g. /abcde{0}/) was
+causing the entire string to be ignored, instead of just the last character.
+
+8. If a pattern like /"([^\\"]+|\\.)*"/ is applied in the normal way to a
+non-matching string, it can take a very, very long time, even for strings of
+quite modest length, because of the nested recursion. PCRE now does better in
+some of these cases. It does this by remembering the last required literal
+character in the pattern, and pre-searching the subject to ensure it is present
+before running the real match. In other words, it applies a heuristic to detect
+some types of certain failure quickly, and in the above example, if presented
+with a string that has no trailing " it gives "no match" very quickly.
+
+9. A new runtime option PCRE_NOTEMPTY causes null string matches to be ignored;
+other alternatives are tried instead.
+
+
+Version 2.06 09-Jun-99
+----------------------
+
+1. Change pcretest's output for amount of store used to show just the code
+space, because the remainder (the data block) varies in size between 32-bit and
+64-bit systems.
+
+2. Added an extra argument to pcre_exec() to supply an offset in the subject to
+start matching at. This allows lookbehinds to work when searching for multiple
+occurrences in a string.
+
+3. Added additional options to pcretest for testing multiple occurrences:
+
+   /+   outputs the rest of the string that follows a match
+   /g   loops for multiple occurrences, using the new startoffset argument
+   /G   loops for multiple occurrences by passing an incremented pointer
+
+4. PCRE wasn't doing the "first character" optimization for patterns starting
+with \b or \B, though it was doing it for other lookbehind assertions. That is,
+it wasn't noticing that a match for a pattern such as /\bxyz/ has to start with
+the letter 'x'. On long subject strings, this gives a significant speed-up.
+
+
+Version 2.05 21-Apr-99
+----------------------
+
+1. Changed the type of magic_number from int to long int so that it works
+properly on 16-bit systems.
+
+2. Fixed a bug which caused patterns starting with .* not to work correctly
+when the subject string contained newline characters. PCRE was assuming
+anchoring for such patterns in all cases, which is not correct because .* will
+not pass a newline unless PCRE_DOTALL is set. It now assumes anchoring only if
+DOTALL is set at top level; otherwise it knows that patterns starting with .*
+must be retried after every newline in the subject.
+
+
+Version 2.04 18-Feb-99
+----------------------
+
+1. For parenthesized subpatterns with repeats whose minimum was zero, the
+computation of the store needed to hold the pattern was incorrect (too large).
+If such patterns were nested a few deep, this could multiply and become a real
+problem.
+
+2. Added /M option to pcretest to show the memory requirement of a specific
+pattern. Made -m a synonym of -s (which does this globally) for compatibility.
+
+3. Subpatterns of the form (regex){n,m} (i.e. limited maximum) were being
+compiled in such a way that the backtracking after subsequent failure was
+pessimal. Something like (a){0,3} was compiled as (a)?(a)?(a)? instead of
+((a)((a)(a)?)?)? with disastrous performance if the maximum was of any size.
+
+
+Version 2.03 02-Feb-99
+----------------------
+
+1. Fixed typo and small mistake in man page.
+
+2. Added 4th condition (GPL supersedes if conflict) and created separate
+LICENCE file containing the conditions.
+
+3. Updated pcretest so that patterns such as /abc\/def/ work like they do in
+Perl, that is the internal \ allows the delimiter to be included in the
+pattern. Locked out the use of \ as a delimiter. If \ immediately follows
+the final delimiter, add \ to the end of the pattern (to test the error).
+
+4. Added the convenience functions for extracting substrings after a successful
+match. Updated pcretest to make it able to test these functions.
+
+
+Version 2.02 14-Jan-99
+----------------------
+
+1. Initialized the working variables associated with each extraction so that
+their saving and restoring doesn't refer to uninitialized store.
+
+2. Put dummy code into study.c in order to trick the optimizer of the IBM C
+compiler for OS/2 into generating correct code. Apparently IBM isn't going to
+fix the problem.
+
+3. Pcretest: the timing code wasn't using LOOPREPEAT for timing execution
+calls, and wasn't printing the correct value for compiling calls. Increased the
+default value of LOOPREPEAT, and the number of significant figures in the
+times.
+
+4. Changed "/bin/rm" in the Makefile to "-rm" so it works on Windows NT.
+
+5. Renamed "deftables" as "dftables" to get it down to 8 characters, to avoid
+a building problem on Windows NT with a FAT file system.
+
+
+Version 2.01 21-Oct-98
+----------------------
+
+1. Changed the API for pcre_compile() to allow for the provision of a pointer
+to character tables built by pcre_maketables() in the current locale. If NULL
+is passed, the default tables are used.
+
+
+Version 2.00 24-Sep-98
+----------------------
+
+1. Since the (>?) facility is in Perl 5.005, don't require PCRE_EXTRA to enable
+it any more.
+
+2. Allow quantification of (?>) groups, and make it work correctly.
+
+3. The first character computation wasn't working for (?>) groups.
+
+4. Correct the implementation of \Z (it is permitted to match on the \n at the
+end of the subject) and add 5.005's \z, which really does match only at the
+very end of the subject.
+
+5. Remove the \X "cut" facility; Perl doesn't have it, and (?> is neater.
+
+6. Remove the ability to specify CASELESS, MULTILINE, DOTALL, and
+DOLLAR_END_ONLY at runtime, to make it possible to implement the Perl 5.005
+localized options. All options to pcre_study() were also removed.
+
+7. Add other new features from 5.005:
+
+   $(?<=           positive lookbehind
+   $(?<!           negative lookbehind
+   (?imsx-imsx)    added the unsetting capability
+                   such a setting is global if at outer level; local otherwise
+   (?imsx-imsx:)   non-capturing groups with option setting
+   (?(cond)re|re)  conditional pattern matching
+
+   A backreference to itself in a repeated group matches the previous
+   captured string.
+
+8. General tidying up of studying (both automatic and via "study")
+consequential on the addition of new assertions.
+
+9. As in 5.005, unlimited repeated groups that could match an empty substring
+are no longer faulted at compile time. Instead, the loop is forcibly broken at
+runtime if any iteration does actually match an empty substring.
+
+10. Include the RunTest script in the distribution.
+
+11. Added tests from the Perl 5.005_02 distribution. This showed up a few
+discrepancies, some of which were old and were also with respect to 5.004. They
+have now been fixed.
+
+
+Version 1.09 28-Apr-98
+----------------------
+
+1. A negated single character class followed by a quantifier with a minimum
+value of one (e.g.  [^x]{1,6}  ) was not compiled correctly. This could lead to
+program crashes, or just wrong answers. This did not apply to negated classes
+containing more than one character, or to minima other than one.
+
+
+Version 1.08 27-Mar-98
+----------------------
+
+1. Add PCRE_UNGREEDY to invert the greediness of quantifiers.
+
+2. Add (?U) and (?X) to set PCRE_UNGREEDY and PCRE_EXTRA respectively. The
+latter must appear before anything that relies on it in the pattern.
+
+
+Version 1.07 16-Feb-98
+----------------------
+
+1. A pattern such as /((a)*)*/ was not being diagnosed as in error (unlimited
+repeat of a potentially empty string).
+
+
+Version 1.06 23-Jan-98
+----------------------
+
+1. Added Markus Oberhumer's little patches for C++.
+
+2. Literal strings longer than 255 characters were broken.
+
+
+Version 1.05 23-Dec-97
+----------------------
+
+1. Negated character classes containing more than one character were failing if
+PCRE_CASELESS was set at run time.
+
+
+Version 1.04 19-Dec-97
+----------------------
+
+1. Corrected the man page, where some "const" qualifiers had been omitted.
+
+2. Made debugging output print "{0,xxx}" instead of just "{,xxx}" to agree with
+input syntax.
+
+3. Fixed memory leak which occurred when a regex with back references was
+matched with an offsets vector that wasn't big enough. The temporary memory
+that is used in this case wasn't being freed if the match failed.
+
+4. Tidied pcretest to ensure it frees memory that it gets.
+
+5. Temporary memory was being obtained in the case where the passed offsets
+vector was exactly big enough.
+
+6. Corrected definition of offsetof() from change 5 below.
+
+7. I had screwed up change 6 below and broken the rules for the use of
+setjmp(). Now fixed.
+
+
+Version 1.03 18-Dec-97
+----------------------
+
+1. A erroneous regex with a missing opening parenthesis was correctly
+diagnosed, but PCRE attempted to access brastack[-1], which could cause crashes
+on some systems.
+
+2. Replaced offsetof(real_pcre, code) by offsetof(real_pcre, code[0]) because
+it was reported that one broken compiler failed on the former because "code" is
+also an independent variable.
+
+3. The erroneous regex a[]b caused an array overrun reference.
+
+4. A regex ending with a one-character negative class (e.g. /[^k]$/) did not
+fail on data ending with that character. (It was going on too far, and checking
+the next character, typically a binary zero.) This was specific to the
+optimized code for single-character negative classes.
+
+5. Added a contributed patch from the TIN world which does the following:
+
+  + Add an undef for memmove, in case the the system defines a macro for it.
+
+  + Add a definition of offsetof(), in case there isn't one. (I don't know
+    the reason behind this - offsetof() is part of the ANSI standard - but
+    it does no harm).
+
+  + Reduce the ifdef's in pcre.c using macro DPRINTF, thereby eliminating
+    most of the places where whitespace preceded '#'. I have given up and
+    allowed the remaining 2 cases to be at the margin.
+
+  + Rename some variables in pcre to eliminate shadowing. This seems very
+    pedantic, but does no harm, of course.
+
+6. Moved the call to setjmp() into its own function, to get rid of warnings
+from gcc -Wall, and avoided calling it at all unless PCRE_EXTRA is used.
+
+7. Constructs such as \d{8,} were compiling into the equivalent of
+\d{8}\d{0,65527} instead of \d{8}\d* which didn't make much difference to the
+outcome, but in this particular case used more store than had been allocated,
+which caused the bug to be discovered because it threw up an internal error.
+
+8. The debugging code in both pcre and pcretest for outputting the compiled
+form of a regex was going wrong in the case of back references followed by
+curly-bracketed repeats.
+
+
+Version 1.02 12-Dec-97
+----------------------
+
+1. Typos in pcre.3 and comments in the source fixed.
+
+2. Applied a contributed patch to get rid of places where it used to remove
+'const' from variables, and fixed some signed/unsigned and uninitialized
+variable warnings.
+
+3. Added the "runtest" target to Makefile.
+
+4. Set default compiler flag to -O2 rather than just -O.
+
+
+Version 1.01 19-Nov-97
+----------------------
+
+1. PCRE was failing to diagnose unlimited repeat of empty string for patterns
+like /([ab]*)*/, that is, for classes with more than one character in them.
+
+2. Likewise, it wasn't diagnosing patterns with "once-only" subpatterns, such
+as /((?>a*))*/ (a PCRE_EXTRA facility).
+
+
+Version 1.00 18-Nov-97
+----------------------
+
+1. Added compile-time macros to support systems such as SunOS4 which don't have
+memmove() or strerror() but have other things that can be used instead.
+
+2. Arranged that "make clean" removes the executables.
+
+
+Version 0.99 27-Oct-97
+----------------------
+
+1. Fixed bug in code for optimizing classes with only one character. It was
+initializing a 32-byte map regardless, which could cause it to run off the end
+of the memory it had got.
+
+2. Added, conditional on PCRE_EXTRA, the proposed (?>REGEX) construction.
+
+
+Version 0.98 22-Oct-97
+----------------------
+
+1. Fixed bug in code for handling temporary memory usage when there are more
+back references than supplied space in the ovector. This could cause segfaults.
+
+
+Version 0.97 21-Oct-97
+----------------------
+
+1. Added the \X "cut" facility, conditional on PCRE_EXTRA.
+
+2. Optimized negated single characters not to use a bit map.
+
+3. Brought error texts together as macro definitions; clarified some of them;
+fixed one that was wrong - it said "range out of order" when it meant "invalid
+escape sequence".
+
+4. Changed some char * arguments to const char *.
+
+5. Added PCRE_NOTBOL and PCRE_NOTEOL (from POSIX).
+
+6. Added the POSIX-style API wrapper in pcreposix.a and testing facilities in
+pcretest.
+
+
+Version 0.96 16-Oct-97
+----------------------
+
+1. Added a simple "pgrep" utility to the distribution.
+
+2. Fixed an incompatibility with Perl: "{" is now treated as a normal character
+unless it appears in one of the precise forms "{ddd}", "{ddd,}", or "{ddd,ddd}"
+where "ddd" means "one or more decimal digits".
+
+3. Fixed serious bug. If a pattern had a back reference, but the call to
+pcre_exec() didn't supply a large enough ovector to record the related
+identifying subpattern, the match always failed. PCRE now remembers the number
+of the largest back reference, and gets some temporary memory in which to save
+the offsets during matching if necessary, in order to ensure that
+backreferences always work.
+
+4. Increased the compatibility with Perl in a number of ways:
+
+  (a) . no longer matches \n by default; an option PCRE_DOTALL is provided
+      to request this handling. The option can be set at compile or exec time.
+
+  (b) $ matches before a terminating newline by default; an option
+      PCRE_DOLLAR_ENDONLY is provided to override this (but not in multiline
+      mode). The option can be set at compile or exec time.
+
+  (c) The handling of \ followed by a digit other than 0 is now supposed to be
+      the same as Perl's. If the decimal number it represents is less than 10
+      or there aren't that many previous left capturing parentheses, an octal
+      escape is read. Inside a character class, it's always an octal escape,
+      even if it is a single digit.
+
+  (d) An escaped but undefined alphabetic character is taken as a literal,
+      unless PCRE_EXTRA is set. Currently this just reserves the remaining
+      escapes.
+
+  (e) {0} is now permitted. (The previous item is removed from the compiled
+      pattern).
+
+5. Changed all the names of code files so that the basic parts are no longer
+than 10 characters, and abolished the teeny "globals.c" file.
+
+6. Changed the handling of character classes; they are now done with a 32-byte
+bit map always.
+
+7. Added the -d and /D options to pcretest to make it possible to look at the
+internals of compilation without having to recompile pcre.
+
+
+Version 0.95 23-Sep-97
+----------------------
+
+1. Fixed bug in pre-pass concerning escaped "normal" characters such as \x5c or
+\x20 at the start of a run of normal characters. These were being treated as
+real characters, instead of the source characters being re-checked.
+
+
+Version 0.94 18-Sep-97
+----------------------
+
+1. The functions are now thread-safe, with the caveat that the global variables
+containing pointers to malloc() and free() or alternative functions are the
+same for all threads.
+
+2. Get pcre_study() to generate a bitmap of initial characters for non-
+anchored patterns when this is possible, and use it if passed to pcre_exec().
+
+
+Version 0.93 15-Sep-97
+----------------------
+
+1. /(b)|(:+)/ was computing an incorrect first character.
+
+2. Add pcre_study() to the API and the passing of pcre_extra to pcre_exec(),
+but not actually doing anything yet.
+
+3. Treat "-" characters in classes that cannot be part of ranges as literals,
+as Perl does (e.g. [-az] or [az-]).
+
+4. Set the anchored flag if a branch starts with .* or .*? because that tests
+all possible positions.
+
+5. Split up into different modules to avoid including unneeded functions in a
+compiled binary. However, compile and exec are still in one module. The "study"
+function is split off.
+
+6. The character tables are now in a separate module whose source is generated
+by an auxiliary program - but can then be edited by hand if required. There are
+now no calls to isalnum(), isspace(), isdigit(), isxdigit(), tolower() or
+toupper() in the code.
+
+7. Turn the malloc/free funtions variables into pcre_malloc and pcre_free and
+make them global. Abolish the function for setting them, as the caller can now
+set them directly.
+
+
+Version 0.92 11-Sep-97
+----------------------
+
+1. A repeat with a fixed maximum and a minimum of 1 for an ordinary character
+(e.g. /a{1,3}/) was broken (I mis-optimized it).
+
+2. Caseless matching was not working in character classes if the characters in
+the pattern were in upper case.
+
+3. Make ranges like [W-c] work in the same way as Perl for caseless matching.
+
+4. Make PCRE_ANCHORED public and accept as a compile option.
+
+5. Add an options word to pcre_exec() and accept PCRE_ANCHORED and
+PCRE_CASELESS at run time. Add escapes \A and \I to pcretest to cause it to
+pass them.
+
+6. Give an error if bad option bits passed at compile or run time.
+
+7. Add PCRE_MULTILINE at compile and exec time, and (?m) as well. Add \M to
+pcretest to cause it to pass that flag.
+
+8. Add pcre_info(), to get the number of identifying subpatterns, the stored
+options, and the first character, if set.
+
+9. Recognize C+ or C{n,m} where n >= 1 as providing a fixed starting character.
+
+
+Version 0.91 10-Sep-97
+----------------------
+
+1. PCRE was failing to diagnose unlimited repeats of subpatterns that could
+match the empty string as in /(a*)*/. It was looping and ultimately crashing.
+
+2. PCRE was looping on encountering an indefinitely repeated back reference to
+a subpattern that had matched an empty string, e.g. /(a|)\1*/. It now does what
+Perl does - treats the match as successful.
+
+****
diff --git a/srclib/pcre/INSTALL b/srclib/pcre/INSTALL
new file mode 100644
index 0000000000..d63a78fef9
--- /dev/null
+++ b/srclib/pcre/INSTALL
@@ -0,0 +1,185 @@
+Basic Installation
+==================
+
+   These are generic installation instructions that apply to systems that
+can run the `configure' shell script - Unix systems and any that imitate
+it. They are not specific to PCRE. There are PCRE-specific instructions
+for non-Unix systems in the file NON-UNIX.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
diff --git a/srclib/pcre/LICENCE b/srclib/pcre/LICENCE
new file mode 100644
index 0000000000..f305033c16
--- /dev/null
+++ b/srclib/pcre/LICENCE
@@ -0,0 +1,32 @@
+PCRE LICENCE
+------------
+
+PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language.
+
+Written by: Philip Hazel <ph10@cam.ac.uk>
+
+University of Cambridge Computing Service,
+Cambridge, England. Phone: +44 1223 334714.
+
+Copyright (c) 1997-2000 University of Cambridge
+
+Permission is granted to anyone to use this software for any purpose on any
+computer system, and to redistribute it freely, subject to the following
+restrictions:
+
+1. This software is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+2. The origin of this software must not be misrepresented, either by
+   explicit claim or by omission.
+
+3. Altered versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+
+4. If PCRE is embedded in any software that is released under the GNU
+   General Purpose Licence (GPL), then the terms of that licence shall
+   supersede any condition above with which it is incompatible.
+
+End
diff --git a/srclib/pcre/Makefile.in b/srclib/pcre/Makefile.in
new file mode 100644
index 0000000000..b837424777
--- /dev/null
+++ b/srclib/pcre/Makefile.in
@@ -0,0 +1,215 @@
+
+# Makefile.in for PCRE (Perl-Compatible Regular Expression) library.
+
+#---------------------------------------------------------------------------#
+# To build mingw32 DLL uncomment the next two lines. This addition for      #
+# mingw32 was contributed by <Paul.Sokolovsky@technologist.com>. I (Philip  #
+# Hazel) don't know anything about it! There are some additional targets at #
+# the bottom of this Makefile.                                              #
+#---------------------------------------------------------------------------#
+#
+# include dll.mk
+# DLL_LDFLAGS=-s
+
+
+#---------------------------------------------------------------------------#
+# The next few lines are modified by "configure" to insert data that it is  #
+# given in its arguments, or which it finds out for itself.                 #
+#---------------------------------------------------------------------------#
+
+# BINDIR is the directory in which the pgrep command is installed.
+# INCDIR is the directory in which the public header file pcre.h is installed.
+# LIBDIR is the directory in which the libraries are installed.
+# MANDIR is the directory in which the man pages are installed.
+# The pcretest program, as it is a test program, does not get installed
+# anywhere.
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+BINDIR = @bindir@
+LIBDIR = @libdir@
+INCDIR = @includedir@
+MANDIR = @mandir@
+
+CC = @CC@
+CFLAGS = @CFLAGS@
+RANLIB = @RANLIB@
+
+# LIBTOOL defaults to "", which cuts out the building of shared libraries.
+# If "configure" is called with --enable-shared-libraries, then LIBTOOL is
+# set to "libtool", which causes shared libraries to be built, and LIBSUFFIX
+# is set to "la" instead of "a", which causes the shared libraries to be
+# installed.
+
+LIBTOOL = @LIBTOOL@
+LIBSUFFIX = @LIBSUFFIX@
+
+# These are the version numbers for the shared libraries
+
+PCRELIBVERSION = @PCRE_LIB_VERSION@
+PCREPOSIXLIBVERSION = @PCRE_POSIXLIB_VERSION@
+
+
+#---------------------------------------------------------------------------#
+# A copy of install-sh is in this distribution and is used by default.      #
+#---------------------------------------------------------------------------#
+
+INSTALL = ./install-sh -c
+INSTALL_DATA = ${INSTALL} -m 644
+
+
+#---------------------------------------------------------------------------#
+# For almost all systems, the command to create a library is "ar cq", but   #
+# there is at least one where it is different, to make this configurable.   #
+# However, I haven't got round to learning how to make "configure" find     #
+# this out for itself. It is necessary to use a command such as             #
+# "make AR='ar -rc'" if you need to vary this.                              #
+#---------------------------------------------------------------------------#
+
+AR = ar cq
+
+
+##############################################################################
+
+
+OBJ = maketables.o get.o study.o pcre.o
+LOBJ = maketables.lo get.lo study.lo pcre.lo
+
+all:            libtool libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) pcretest pgrep
+
+libtool:        config.guess config.sub ltconfig ltmain.sh
+		@if test "$(LIBTOOL)" = "libtool"; then \
+		  echo '--- Building libtool ---'; \
+		  ./ltconfig ./ltmain.sh; \
+		  echo '--- Built libtool ---'; fi
+
+pgrep:          libpcre.$(LIBSUFFIX) pgrep.o
+		  @echo ' '
+		  @echo '--- Building pgrep utility'
+		  @echo ' '
+		$(LIBTOOL) $(CC) $(CFLAGS) -o pgrep pgrep.o libpcre.$(LIBSUFFIX)
+
+pcretest:       libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) pcretest.o
+		  @echo ' '
+		  @echo '--- Building pcretest testing program'
+		  @echo ' '
+		$(LIBTOOL) $(PURIFY) $(CC) $(CFLAGS) -o pcretest pcretest.o \
+		  libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX)
+
+libpcre.a:      $(OBJ)
+		@echo ' '
+		@echo '--- Building static library: libpcre'
+		@echo ' '
+		-rm -f libpcre.a
+		$(AR) libpcre.a $(OBJ)
+		$(RANLIB) libpcre.a
+
+libpcre.la:     $(OBJ)
+		@echo ' '
+		@echo '--- Building shared library: libpcre'
+		@echo ' '
+		-rm -f libpcre.la
+		libtool $(CC) -version-info '$(PCRELIBVERSION)' -o libpcre.la -rpath $(LIBDIR) $(LOBJ)
+
+libpcreposix.a: pcreposix.o
+		@echo ' '
+		@echo '--- Building static library: libpcreposix'
+		@echo ' '
+		-rm -f libpcreposix.a
+		$(AR) libpcreposix.a pcreposix.o
+		$(RANLIB) libpcreposix.a
+
+libpcreposix.la: pcreposix.o
+		@echo ' '
+		@echo '--- Building shared library: libpcreposix'
+		@echo ' '
+		-rm -f libpcreposix.la
+		libtool $(CC) -version-info '$(PCREPOSIXLIBVERSION)' -o libpcreposix.la -rpath $(LIBDIR) pcreposix.lo
+
+pcre.o:         chartables.c pcre.c pcre.h internal.h config.h Makefile
+		$(LIBTOOL) $(CC) -c $(CFLAGS) pcre.c
+
+pcreposix.o:    pcreposix.c pcreposix.h internal.h pcre.h config.h Makefile
+		$(LIBTOOL) $(CC) -c $(CFLAGS) pcreposix.c
+
+maketables.o:   maketables.c pcre.h internal.h config.h Makefile
+		$(LIBTOOL) $(CC) -c $(CFLAGS) maketables.c
+
+get.o:          get.c pcre.h internal.h config.h Makefile
+		$(LIBTOOL) $(CC) -c $(CFLAGS) get.c
+
+study.o:        study.c pcre.h internal.h config.h Makefile
+		$(LIBTOOL) $(CC) -c $(CFLAGS) study.c
+
+pcretest.o:     pcretest.c pcre.h config.h Makefile
+		$(CC) -c $(CFLAGS) pcretest.c
+
+pgrep.o:        pgrep.c pcre.h Makefile config.h
+		$(CC) -c $(CFLAGS) pgrep.c
+
+# An auxiliary program makes the default character table source
+
+chartables.c:   dftables
+		./dftables >chartables.c
+
+dftables:       dftables.c maketables.c pcre.h internal.h config.h Makefile
+		$(CC) -o dftables $(CFLAGS) dftables.c
+
+install:        all
+		$(LIBTOOL) $(INSTALL_DATA) libpcre.$(LIBSUFFIX) $(LIBDIR)/libpcre.$(LIBSUFFIX)
+		$(LIBTOOL) $(INSTALL_DATA) libpcreposix.$(LIBSUFFIX) $(LIBDIR)/libpcreposix.$(LIBSUFFIX)
+		$(INSTALL_DATA) pcre.h $(INCDIR)/pcre.h
+		$(INSTALL_DATA) pcreposix.h $(INCDIR)/pcreposix.h
+		$(INSTALL_DATA) doc/pcre.3 $(MANDIR)/man3/pcre.3
+		$(INSTALL_DATA) doc/pcreposix.3 $(MANDIR)/man3/pcreposix.3
+		$(INSTALL_DATA) doc/pgrep.1 $(MANDIR)/man1/pgrep.1
+		@if test "$(LIBTOOL)" = "libtool"; then \
+		  echo ' '; \
+		  echo '--- Rebuilding pgrep to use installed shared library ---'; \
+		  echo $(CC) $(CFLAGS) -o pgrep pgrep.o -L$(LIBDIR) -lpcre; \
+		  $(CC) $(CFLAGS) -o pgrep pgrep.o -L$(LIBDIR) -lpcre; \
+		  echo '--- Rebuilding pcretest to use installed shared library ---'; \
+		  echo $(CC) $(CFLAGS) -o pcretest pcretest.o -L$(LIBDIR) -lpcre -lpcreposix; \
+		  $(CC) $(CFLAGS) -o pcretest pcretest.o -L$(LIBDIR) -lpcre -lpcreposix; \
+		fi
+		$(INSTALL)	pgrep $(BINDIR)/pgrep
+		$(INSTALL)	pcre-config $(BINDIR)/pcre-config
+
+# We deliberately omit dftables and chartables.c from 'make clean'; once made
+# chartables.c shouldn't change, and if people have edited the tables by hand,
+# you don't want to throw them away.
+
+clean:;         -rm -rf *.o *.lo *.a *.la .libs pcretest pgrep testtry
+
+# But "make distclean" should get back to a virgin distribution
+
+distclean:      clean
+		-rm -f chartables.c libtool pcre-config pcre.h \
+		Makefile config.h config.status config.log config.cache
+
+check:          runtest
+
+runtest:        all
+		./RunTest
+
+######## MINGW32 ############### MINGW32 ############### MINGW32 #############
+
+# This addition for mingw32 was contributed by  Paul Sokolovsky
+# <Paul.Sokolovsky@technologist.com>. I (PH) don't know anything about it!
+
+dll:            _dll libpcre.dll.a pgrep_d pcretest_d
+
+_dll:
+		$(MAKE) CFLAGS=-DSTATIC pcre.dll
+
+pcre.dll:       $(OBJ) pcreposix.o pcre.def
+libpcre.dll.a:  pcre.def
+
+pgrep_d:        libpcre.dll.a pgrep.o
+		$(CC) $(CFLAGS) -L. -o pgrep pgrep.o -lpcre.dll
+
+pcretest_d:     libpcre.dll.a pcretest.o
+		$(PURIFY) $(CC) $(CFLAGS) -L. -o pcretest pcretest.o -lpcre.dll
+
+# End
diff --git a/srclib/pcre/NEWS b/srclib/pcre/NEWS
new file mode 100644
index 0000000000..4c80bd6833
--- /dev/null
+++ b/srclib/pcre/NEWS
@@ -0,0 +1,46 @@
+News about PCRE releases
+------------------------
+
+Release 3.0 01-Feb-00
+---------------------
+
+1. A "configure" script is now used to configure PCRE for Unix systems. It
+builds a Makefile, a config.h file, and the pcre-config script.
+
+2. PCRE is built as a shared library by default.
+
+3. There is support for POSIX classes such as [:alpha:].
+
+5. There is an experimental recursion feature.
+
+----------------------------------------------------------------------------
+          IMPORTANT FOR THOSE UPGRADING FROM VERSIONS BEFORE 2.00
+
+Please note that there has been a change in the API such that a larger
+ovector is required at matching time, to provide some additional workspace.
+The new man page has details. This change was necessary in order to support
+some of the new functionality in Perl 5.005.
+
+          IMPORTANT FOR THOSE UPGRADING FROM VERSION 2.00
+
+Another (I hope this is the last!) change has been made to the API for the
+pcre_compile() function. An additional argument has been added to make it
+possible to pass over a pointer to character tables built in the current
+locale by pcre_maketables(). To use the default tables, this new arguement
+should be passed as NULL.
+
+          IMPORTANT FOR THOSE UPGRADING FROM VERSION 2.05
+
+Yet another (and again I hope this really is the last) change has been made
+to the API for the pcre_exec() function. An additional argument has been
+added to make it possible to start the match other than at the start of the
+subject string. This is important if there are lookbehinds. The new man
+page has the details, but you just want to convert existing programs, all
+you need to do is to stick in a new fifth argument to pcre_exec(), with a
+value of zero. For example, change
+
+  pcre_exec(pattern, extra, subject, length, options, ovec, ovecsize)
+to
+  pcre_exec(pattern, extra, subject, length, 0, options, ovec, ovecsize)
+
+****
diff --git a/srclib/pcre/NON-UNIX-USE b/srclib/pcre/NON-UNIX-USE
new file mode 100644
index 0000000000..09a743245b
--- /dev/null
+++ b/srclib/pcre/NON-UNIX-USE
@@ -0,0 +1,50 @@
+Compiling PCRE on non-Unix systems
+----------------------------------
+
+If you want to compile PCRE for a non-Unix system, note that it consists
+entirely of code written in Standard C, and so should compile successfully
+on any machine with a Standard C compiler and library, using normal compiling
+commands to do the following:
+
+(1) Copy or rename the file config.in as config.h, and change the macros that
+define HAVE_STRERROR and HAVE_MEMMOVE to define them as 1 rather than 0.
+Unfortunately, because of the way Unix autoconf works, the default setting has
+to be 0.
+
+(2) Copy or rename the file pcre.in as pcre.h, and change the macro definitions
+for PCRE_MAJOR, PCRE_MINOR, and PCRE_DATE near its start to the values set in
+configure.in.
+
+(3) Compile dftables.c as a stand-alone program, and then run it with
+the standard output sent to chartables.c. This generates a set of standard
+character tables.
+
+(4) Compile maketables.c, get.c, study.c and pcre.c and link them all
+together into an object library in whichever form your system keeps such
+libraries. This is the pcre library (chartables.c gets included by means of an
+#include directive).
+
+(5) Similarly, compile pcreposix.c and link it as the pcreposix library.
+
+(6) Compile the test program pcretest.c. This needs the functions in the
+pcre and pcreposix libraries when linking.
+
+(7) Run pcretest on the testinput files in the testdata directory, and check
+that the output matches the corresponding testoutput files. You must use the
+-i option when checking testinput2.
+
+If you have a system without "configure" but where you can use a Makefile, edit
+Makefile.in to create Makefile, substituting suitable values for the variables
+at the head of the file.
+
+Some help in building a Win32 DLL of PCRE in GnuWin32 environments was
+contributed by Paul.Sokolovsky@technologist.com. These environments are
+Mingw32 (http://www.xraylith.wisc.edu/~khan/software/gnu-win32/) and
+CygWin  (http://sourceware.cygnus.com/cygwin/). Paul comments:
+
+  For CygWin, set CFLAGS=-mno-cygwin, and do 'make dll'. You'll get
+  pcre.dll (containing pcreposix also), libpcre.dll.a, and dynamically
+  linked pgrep and pcretest. If you have /bin/sh, run RunTest (three
+  main test go ok, locale not supported).
+
+****
diff --git a/srclib/pcre/README b/srclib/pcre/README
new file mode 100644
index 0000000000..90aaf4d6a6
--- /dev/null
+++ b/srclib/pcre/README
@@ -0,0 +1,239 @@
+README file for PCRE (Perl-compatible regular expression library)
+-----------------------------------------------------------------
+
+The latest release of PCRE is always available from
+
+  ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-xxx.tar.gz
+
+Please read the NEWS file if you are upgrading from a previous release.
+
+
+Building PCRE on a Unix system
+------------------------------
+
+To build PCRE on a Unix system, run the "configure" command in the PCRE
+distribution directory. This is a standard GNU "autoconf" configuration script,
+for which generic instructions are supplied in INSTALL. On many systems just
+running "./configure" is sufficient, but the usual methods of changing standard
+defaults are available. For example
+
+CFLAGS='-O2 -Wall' ./configure --prefix=/opt/local
+
+specifies that the C compiler should be run with the flags '-O2 -Wall' instead
+of the default, and that "make install" should install PCRE under /opt/local
+instead of the default /usr/local. The "configure" script builds thre files:
+
+. Makefile is built by copying Makefile.in and making substitutions.
+. config.h is built by copying config.in and making substitutions.
+. pcre-config is built by copying pcre-config.in and making substitutions.
+
+Once "configure" has run, you can run "make". It builds two libraries called
+libpcre and libpcreposix, a test program called pcretest, and the pgrep
+command. You can use "make install" to copy these, and the public header file
+pcre.h, to appropriate live directories on your system, in the normal way.
+
+Running "make install" also installs the command pcre-config, which can be used
+to recall information about the PCRE configuration and installation. For
+example,
+
+  pcre-config --version
+
+prints the version number, and
+
+ pcre-config --libs
+
+outputs information about where the library is installed. This command can be
+included in makefiles for programs that use PCRE, saving the programmer from
+having to remember too many details.
+
+
+Shared libraries on Unix systems
+--------------------------------
+
+The default distribution builds PCRE as two shared libraries. This support is
+new and experimental and may not work on all systems. It relies on the
+"libtool" scripts - these are distributed with PCRE. It should build a
+"libtool" script and use this to compile and link shared libraries, which are
+placed in a subdirectory called .libs. The programs pcretest and pgrep are
+built to use these uninstalled libraries by means of wrapper scripts. When you
+use "make install" to install shared libraries, pgrep and pcretest are
+automatically re-built to use the newly installed libraries. However, only
+pgrep is installed, as pcretest is really just a test program.
+
+To build PCRE using static libraries you must use --disable-shared when
+configuring it. For example
+
+./configure --prefix=/usr/gnu --disable-shared
+
+Then run "make" in the usual way.
+
+
+Building on non-Unix systems
+----------------------------
+
+For a non-Unix system, read the comments in the file NON-UNIX-USE. PCRE has
+been compiled on Windows systems and on Macintoshes, but I don't know the
+details because I don't use those systems. It should be straightforward to
+build PCRE on any system that has a Standard C compiler, because it uses only
+Standard C functions.
+
+
+Testing PCRE
+------------
+
+To test PCRE on a Unix system, run the RunTest script in the pcre directory.
+(This can also be run by "make runtest" or "make check".) For other systems,
+see the instruction in NON-UNIX-USE.
+
+The script runs the pcretest test program (which is documented in
+doc/pcretest.txt) on each of the testinput files (in the testdata directory) in
+turn, and compares the output with the contents of the corresponding testoutput
+file. A file called testtry is used to hold the output from pcretest. To run
+pcretest on just one of the test files, give its number as an argument to
+RunTest, for example:
+
+  RunTest 3
+
+The first and third test files can also be fed directly into the perltest
+script to check that Perl gives the same results. The third file requires the
+additional features of release 5.005, which is why it is kept separate from the
+main test input, which needs only Perl 5.004. In the long run, when 5.005 is
+widespread, these two test files may get amalgamated.
+
+The second set of tests check pcre_info(), pcre_study(), pcre_copy_substring(),
+pcre_get_substring(), pcre_get_substring_list(), error detection and run-time
+flags that are specific to PCRE, as well as the POSIX wrapper API.
+
+The fourth set of tests checks pcre_maketables(), the facility for building a
+set of character tables for a specific locale and using them instead of the
+default tables. The tests make use of the "fr" (French) locale. Before running
+the test, the script checks for the presence of this locale by running the
+"locale" command. If that command fails, or if it doesn't include "fr" in the
+list of available locales, the fourth test cannot be run, and a comment is
+output to say why. If running this test produces instances of the error
+
+  ** Failed to set locale "fr"
+
+in the comparison output, it means that locale is not available on your system,
+despite being listed by "locale". This does not mean that PCRE is broken.
+
+PCRE has its own native API, but a set of "wrapper" functions that are based on
+the POSIX API are also supplied in the library libpcreposix.a. Note that this
+just provides a POSIX calling interface to PCRE: the regular expressions
+themselves still follow Perl syntax and semantics. The header file
+for the POSIX-style functions is called pcreposix.h. The official POSIX name is
+regex.h, but I didn't want to risk possible problems with existing files of
+that name by distributing it that way. To use it with an existing program that
+uses the POSIX API, it will have to be renamed or pointed at by a link.
+
+
+Character tables
+----------------
+
+PCRE uses four tables for manipulating and identifying characters. The final
+argument of the pcre_compile() function is a pointer to a block of memory
+containing the concatenated tables. A call to pcre_maketables() can be used to
+generate a set of tables in the current locale. If the final argument for
+pcre_compile() is passed as NULL, a set of default tables that is built into
+the binary is used.
+
+The source file called chartables.c contains the default set of tables. This is
+not supplied in the distribution, but is built by the program dftables
+(compiled from dftables.c), which uses the ANSI C character handling functions
+such as isalnum(), isalpha(), isupper(), islower(), etc. to build the table
+sources. This means that the default C locale which is set for your system will
+control the contents of these default tables. You can change the default tables
+by editing chartables.c and then re-building PCRE. If you do this, you should
+probably also edit Makefile to ensure that the file doesn't ever get
+re-generated.
+
+The first two 256-byte tables provide lower casing and case flipping functions,
+respectively. The next table consists of three 32-byte bit maps which identify
+digits, "word" characters, and white space, respectively. These are used when
+building 32-byte bit maps that represent character classes.
+
+The final 256-byte table has bits indicating various character types, as
+follows:
+
+    1   white space character
+    2   letter
+    4   decimal digit
+    8   hexadecimal digit
+   16   alphanumeric or '_'
+  128   regular expression metacharacter or binary zero
+
+You should not alter the set of characters that contain the 128 bit, as that
+will cause PCRE to malfunction.
+
+
+Manifest
+--------
+
+The distribution should contain the following files:
+
+(A) The actual source files of the PCRE library functions and their
+    headers:
+
+  dftables.c            auxiliary program for building chartables.c
+  get.c                 )
+  maketables.c          )
+  study.c               ) source of
+  pcre.c                )   the functions
+  pcreposix.c           )
+  pcre.in               "source" for the header for the external API; pcre.h
+                          is built from this by "configure"
+  pcreposix.h           header for the external POSIX wrapper API
+  internal.h            header for internal use
+  config.in             template for config.h, which is built by configure
+
+(B) Auxiliary files:
+
+  AUTHORS               information about the author of PCRE
+  ChangeLog             log of changes to the code
+  INSTALL               generic installation instructions
+  LICENCE               conditions for the use of PCRE
+  COPYING               the same, using GNU's standard name
+  Makefile.in           template for Unix Makefile, which is built by configure
+  NEWS                  important changes in this release
+  NON-UNIX-USE          notes on building PCRE on non-Unix systems
+  README                this file
+  RunTest               a Unix shell script for running tests
+  config.guess          ) files used by libtool,
+  config.sub            )   used only when building a shared library
+  configure             a configuring shell script (built by autoconf)
+  configure.in          the autoconf input used to build configure
+  doc/Tech.Notes        notes on the encoding
+  doc/pcre.3            man page source for the PCRE functions
+  doc/pcre.html         HTML version
+  doc/pcre.txt          plain text version
+  doc/pcreposix.3       man page source for the POSIX wrapper API
+  doc/pcreposix.html    HTML version
+  doc/pcreposix.txt     plain text version
+  doc/pcretest.txt      documentation of test program
+  doc/perltest.txt      documentation of Perl test program
+  doc/pgrep.1           man page source for the pgrep utility
+  doc/pgrep.html        HTML version
+  doc/pgrep.txt         plain text version
+  install-sh            a shell script for installing files
+  ltconfig              ) files used to build "libtool",
+  ltmain.sh             )   used only when building a shared library
+  pcretest.c            test program
+  perltest              Perl test program
+  pgrep.c               source of a grep utility that uses PCRE
+  pcre-config.in        source of script which retains PCRE information
+  testdata/testinput1   test data, compatible with Perl 5.004 and 5.005
+  testdata/testinput2   test data for error messages and non-Perl things
+  testdata/testinput3   test data, compatible with Perl 5.005
+  testdata/testinput4   test data for locale-specific tests
+  testdata/testoutput1  test results corresponding to testinput1
+  testdata/testoutput2  test results corresponding to testinput2
+  testdata/testoutput3  test results corresponding to testinput3
+  testdata/testoutput4  test results corresponding to testinput4
+
+(C) Auxiliary files for Win32 DLL
+
+  dll.mk
+  pcre.def
+
+Philip Hazel <ph10@cam.ac.uk>
+February 2000
diff --git a/srclib/pcre/RunTest b/srclib/pcre/RunTest
new file mode 100755
index 0000000000..85eeb6245e
--- /dev/null
+++ b/srclib/pcre/RunTest
@@ -0,0 +1,94 @@
+#! /bin/sh
+
+# Run PCRE tests
+
+cf=diff
+
+# Select which tests to run; if no selection, run all
+
+do1=no
+do2=no
+do3=no
+do4=no
+
+while [ $# -gt 0 ] ; do
+  case $1 in
+    1) do1=yes;;
+    2) do2=yes;;
+    3) do3=yes;;
+    4) do4=yes;;
+    *) echo "Unknown test number $1"; exit 1;;
+  esac
+  shift
+done
+
+if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no ] ; then
+  do1=yes
+  do2=yes
+  do3=yes
+  do4=yes
+fi
+
+# Primary test, Perl-compatible
+
+if [ $do1 = yes ] ; then
+  echo "Testing main functionality (Perl compatible)"
+  ./pcretest testdata/testinput1 testtry
+  if [ $? = 0 ] ; then
+    $cf testtry testdata/testoutput1
+    if [ $? != 0 ] ; then exit 1; fi
+  else exit 1
+  fi
+fi
+
+# PCRE tests that are not Perl-compatible - API & error tests, mostly
+
+if [ $do2 = yes ] ; then
+  echo "Testing API and error handling (not Perl compatible)"
+  ./pcretest -i testdata/testinput2 testtry
+  if [ $? = 0 ] ; then
+    $cf testtry testdata/testoutput2
+    if [ $? != 0 ] ; then exit 1; fi
+  else exit 1
+  fi
+fi
+
+# Additional Perl-compatible tests for Perl 5.005's new features
+
+if [ $do3 = yes ] ; then
+  echo "Testing Perl 5.005 features (Perl 5.005 compatible)"
+  ./pcretest testdata/testinput3 testtry
+  if [ $? = 0 ] ; then
+    $cf testtry testdata/testoutput3
+    if [ $? != 0 ] ; then exit 1; fi
+  else exit 1
+  fi
+fi
+
+if [ $do1 = yes -a $do2 = yes -a $do3 = yes ] ; then
+  echo "The three main tests all ran OK"
+  echo " " 
+fi
+
+# Locale-specific tests, provided the "fr" locale is available
+
+if [ $do4 = yes ] ; then
+  locale -a | grep '^fr$' >/dev/null
+  if [ $? -eq 0 ] ; then
+    echo "Testing locale-specific features (using 'fr' locale)"
+    ./pcretest testdata/testinput4 testtry
+    if [ $? = 0 ] ; then
+      $cf testtry testdata/testoutput4
+      if [ $? != 0 ] ; then exit 1; fi
+      echo "Locale test ran OK" 
+      echo " " 
+    else exit 1
+    fi
+  else
+    echo "Cannot test locale-specific features - 'fr' locale not found,"
+    echo "or the \"locale\" command is not available to check for it."
+    echo " " 
+  fi
+fi
+
+# End
diff --git a/srclib/pcre/config.guess b/srclib/pcre/config.guess
new file mode 100644
index 0000000000..e1b5871708
--- /dev/null
+++ b/srclib/pcre/config.guess
@@ -0,0 +1,1121 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
+#   Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# The master version of this file is at the FSF in /home/gd/gnu/lib.
+# Please send patches to <autoconf-patches@gnu.org>.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit system type (host/target name).
+#
+# Only a few systems have been added to this list; please add others
+# (but try to keep the structure clean).
+#
+
+# Use $HOST_CC if defined. $CC may point to a cross-compiler
+if test x"$CC_FOR_BUILD" = x; then
+  if test x"$HOST_CC" != x; then
+    CC_FOR_BUILD="$HOST_CC"
+  else
+    if test x"$CC" != x; then
+      CC_FOR_BUILD="$CC"
+    else
+      CC_FOR_BUILD=cc
+    fi
+  fi
+fi
+
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 8/24/94.)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+dummy=dummy-$$
+trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    alpha:OSF1:*:*)
+	if test $UNAME_RELEASE = "V4.0"; then
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+	fi
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	cat <<EOF >$dummy.s
+	.globl main
+	.ent main
+main:
+	.frame \$30,0,\$26,0
+	.prologue 0
+	.long 0x47e03d80 # implver $0
+	lda \$2,259
+	.long 0x47e20c21 # amask $2,$1
+	srl \$1,8,\$2
+	sll \$2,2,\$2
+	sll \$0,3,\$0
+	addl \$1,\$0,\$0
+	addl \$2,\$0,\$0
+	ret \$31,(\$26),1
+	.end main
+EOF
+	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+	if test "$?" = 0 ; then
+		./$dummy
+		case "$?" in
+			7)
+				UNAME_MACHINE="alpha"
+				;;
+			15)
+				UNAME_MACHINE="alphaev5"
+				;;
+			14)
+				UNAME_MACHINE="alphaev56"
+				;;
+			10)
+				UNAME_MACHINE="alphapca56"
+				;;
+			16)
+				UNAME_MACHINE="alphaev6"
+				;;
+		esac
+	fi
+	rm -f $dummy.s $dummy
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit 0 ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit 0 ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit 0 ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-cbm-sysv4
+	exit 0;;
+    amiga:NetBSD:*:*)
+      echo m68k-cbm-netbsd${UNAME_RELEASE}
+      exit 0 ;;
+    amiga:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit 0 ;;
+    arc64:OpenBSD:*:*)
+	echo mips64el-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hkmips:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sgi:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit 0 ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit 0;;
+    arm32:NetBSD:*:*)
+	echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    SR2?01:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit 0;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit 0 ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit 0 ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    i86pc:SunOS:5.*:*)
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit 0 ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit 0 ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:NetBSD:*:*)
+	echo m68k-atari-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor 
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit 0 ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit 0 ;;
+    sun3*:NetBSD:*:*)
+	echo m68k-sun-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sun3*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:NetBSD:*:*)
+	echo m68k-apple-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+	echo m88k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit 0 ;;
+    macppc:NetBSD:*:*)
+        echo powerpc-apple-netbsd${UNAME_RELEASE}
+        exit 0 ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit 0 ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit 0 ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD $dummy.c -o $dummy \
+	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+	  && rm $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit 0 ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit 0 ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit 0 ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit 0 ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+ 	exit 0 ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit 0 ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit 0 ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit 0 ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit 0 ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
+	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+    i?86:AIX:*:*)
+	echo i386-ibm-aix
+	exit 0 ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+		rm -f $dummy.c $dummy
+		echo rs6000-ibm-aix3.2.5
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit 0 ;;
+    *:AIX:*:4)
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=4.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit 0 ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit 0 ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit 0 ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC NetBSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit 0 ;;                           # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit 0 ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit 0 ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit 0 ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit 0 ;;
+    9000/[34678]??:HP-UX:*:*)
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+              sed 's/^              //' << EOF >$dummy.c
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+	rm -f $dummy.c $dummy
+	esac
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit 0 ;;
+    3050*:HI-UX:*:*)
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
+	echo unknown-hitachi-hiuxwe2
+	exit 0 ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit 0 ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit 0 ;;
+    *9??*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit 0 ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit 0 ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit 0 ;;
+    i?86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit 0 ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit 0 ;;
+    hppa*:OpenBSD:*:*)
+	echo hppa-unknown-openbsd
+	exit 0 ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit 0 ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit 0 ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit 0 ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit 0 ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit 0 ;;
+    CRAY*X-MP:*:*:*)
+	echo xmp-cray-unicos
+        exit 0 ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE}
+	exit 0 ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+	exit 0 ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE}
+	exit 0 ;;
+    CRAY*T3E:*:*:*)
+	echo alpha-cray-unicosmk${UNAME_RELEASE}
+	exit 0 ;;
+    CRAY-2:*:*:*)
+	echo cray2-cray-unicos
+        exit 0 ;;
+    F300:UNIX_System_V:*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit 0 ;;
+    F301:UNIX_System_V:*:*)
+       echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
+       exit 0 ;;
+    hp3[0-9][05]:NetBSD:*:*)
+	echo m68k-hp-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hp300:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    i?86:BSD/386:*:* | i?86:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:FreeBSD:*:*)
+	if test -x /usr/bin/objformat; then
+	    if test "elf" = "`/usr/bin/objformat`"; then
+		echo ${UNAME_MACHINE}-unknown-freebsdelf`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'`
+		exit 0
+	    fi
+	fi
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit 0 ;;
+    *:NetBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'`
+	exit 0 ;;
+    *:OpenBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit 0 ;;
+    i*:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit 0 ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i386-pc-interix
+	exit 0 ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit 0 ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit 0 ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    *:GNU:*:*)
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit 0 ;;
+    *:Linux:*:*)
+
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	ld_help_string=`cd /; ld --help 2>&1`
+	ld_supported_emulations=`echo $ld_help_string \
+			 | sed -ne '/supported emulations:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported emulations: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_emulations" in
+	  *ia64)
+		echo "${UNAME_MACHINE}-unknown-linux"
+		exit 0
+		;;
+	  i?86linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit 0
+		;;
+	  i?86coff)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit 0
+		;;
+	  sparclinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  armlinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  elf32arm*)
+		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+		exit 0
+		;;
+	  armelf_linux*)
+		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+		exit 0
+		;;
+	  m68klinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  elf32ppc)
+		# Determine Lib Version
+		cat >$dummy.c <<EOF
+#include <features.h>
+#if defined(__GLIBC__)
+extern char __libc_version[];
+extern char __libc_release[];
+#endif
+main(argc, argv)
+     int argc;
+     char *argv[];
+{
+#if defined(__GLIBC__)
+  printf("%s %s\n", __libc_version, __libc_release);
+#else
+  printf("unkown\n");
+#endif
+  return 0;
+}
+EOF
+		LIBC=""
+		$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
+		if test "$?" = 0 ; then
+			./$dummy | grep 1\.99 > /dev/null
+			if test "$?" = 0 ; then
+				LIBC="libc1"
+			fi
+		fi	
+		rm -f $dummy.c $dummy
+		echo powerpc-unknown-linux-gnu${LIBC}
+		exit 0
+		;;
+	esac
+
+	if test "${UNAME_MACHINE}" = "alpha" ; then
+		sed 's/^	//'  <<EOF >$dummy.s
+		.globl main
+		.ent main
+	main:
+		.frame \$30,0,\$26,0
+		.prologue 0
+		.long 0x47e03d80 # implver $0
+		lda \$2,259
+		.long 0x47e20c21 # amask $2,$1
+		srl \$1,8,\$2
+		sll \$2,2,\$2
+		sll \$0,3,\$0
+		addl \$1,\$0,\$0
+		addl \$2,\$0,\$0
+		ret \$31,(\$26),1
+		.end main
+EOF
+		LIBC=""
+		$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+		if test "$?" = 0 ; then
+			./$dummy
+			case "$?" in
+			7)
+				UNAME_MACHINE="alpha"
+				;;
+			15)
+				UNAME_MACHINE="alphaev5"
+				;;
+			14)
+				UNAME_MACHINE="alphaev56"
+				;;
+			10)
+				UNAME_MACHINE="alphapca56"
+				;;
+			16)
+				UNAME_MACHINE="alphaev6"
+				;;
+			esac
+
+			objdump --private-headers $dummy | \
+			  grep ld.so.1 > /dev/null
+			if test "$?" = 0 ; then
+				LIBC="libc1"
+			fi
+		fi
+		rm -f $dummy.s $dummy
+		echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
+	elif test "${UNAME_MACHINE}" = "mips" ; then
+	  cat >$dummy.c <<EOF
+#ifdef __cplusplus
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __MIPSEB__
+  printf ("%s-unknown-linux-gnu\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+  printf ("%sel-unknown-linux-gnu\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+	  rm -f $dummy.c $dummy
+	else
+	  # Either a pre-BFD a.out linker (linux-gnuoldld)
+	  # or one that does not give us useful --help.
+	  # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+	  # If ld does not provide *any* "supported emulations:"
+	  # that means it is gnuoldld.
+	  echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
+	  test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+
+	  case "${UNAME_MACHINE}" in
+	  i?86)
+	    VENDOR=pc;
+	    ;;
+	  *)
+	    VENDOR=unknown;
+	    ;;
+	  esac
+	  # Determine whether the default compiler is a.out or elf
+	  cat >$dummy.c <<EOF
+#include <features.h>
+#ifdef __cplusplus
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __ELF__
+# ifdef __GLIBC__
+#  if __GLIBC__ >= 2
+    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+#  else
+    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+#  endif
+# else
+   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+#else
+  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+	  rm -f $dummy.c $dummy
+	fi ;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+    i?86:DYNIX/ptx:4*:*)
+	echo i386-sequent-sysv4
+	exit 0 ;;
+    i?86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit 0 ;;
+    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit 0 ;;
+    i?86:*:5:7*)
+        # Fixed at (any) Pentium or better
+        UNAME_MACHINE=i586
+        if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
+	    echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
+	else
+	    echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+	fi
+	exit 0 ;;
+    i?86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit 0 ;;
+    pc:*:*:*)
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit 0 ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit 0 ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit 0 ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit 0 ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit 0 ;;
+    M68*:*:R3V[567]*:*)
+	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && echo i486-ncr-sysv4 && exit 0 ;;
+    m68*:LynxOS:2.*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit 0 ;;
+    i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit 0 ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit 0 ;;
+    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                           # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit 0 ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit 0 ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit 0 ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit 0 ;;
+    news*:NEWS-OS:*:6*)
+	echo mips-sony-newsos6
+	exit 0 ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit 0 ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit 0 ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit 0 ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit 0 ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:QNX:*:4*)
+	echo i386-qnx-qnx${UNAME_VERSION}
+	exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+  printf ("vax-dec-bsd\n"); exit (0);
+#else
+  printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
+rm -f $dummy.c $dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit 0 ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit 0 ;;
+    c34*)
+	echo c34-convex-bsd
+	exit 0 ;;
+    c38*)
+	echo c38-convex-bsd
+	exit 0 ;;
+    c4*)
+	echo c4-convex-bsd
+	exit 0 ;;
+    esac
+fi
+
+#echo '(Unable to guess system type)' 1>&2
+
+exit 1
diff --git a/srclib/pcre/config.in b/srclib/pcre/config.in
new file mode 100644
index 0000000000..7631d468cd
--- /dev/null
+++ b/srclib/pcre/config.in
@@ -0,0 +1,28 @@
+
+/* On Unix systems config.in is converted by configure into config.h. PCRE is
+written in Standard C, but there are a few non-standard things it can cope
+with, allowing it to run on SunOS4 and other "close to standard" systems.
+
+On a non-Unix system you should just copy this file into config.h and change
+the definitions of HAVE_STRERROR and HAVE_MEMMOVE to 1. Unfortunately, because
+of the way autoconf works, these cannot be made the defaults. */
+
+/* Define to empty if the keyword does not work. */
+
+#undef const
+
+/* Define to `unsigned' if <stddef.h> doesn't define size_t. */
+
+#undef size_t
+
+/* The following two definitions are mainly for the benefit of SunOS4, which
+doesn't have the strerror() or memmove() functions that should be present in
+all Standard C libraries. The macros should normally be defined with the value
+1 for other systems, but unfortunately we can't make this the default because
+"configure" files generated by autoconf will only change 0 to 1; they won't
+change 1 to 0 if the functions are not found. */
+
+#define HAVE_STRERROR 0
+#define HAVE_MEMMOVE  0
+
+/* End */
diff --git a/srclib/pcre/config.sub b/srclib/pcre/config.sub
new file mode 100644
index 0000000000..28426bb8fa
--- /dev/null
+++ b/srclib/pcre/config.sub
@@ -0,0 +1,1232 @@
+#! /bin/sh
+# Configuration validation subroutine script, version 1.1.
+#   Copyright (C) 1991, 92-97, 1998, 1999 Free Software Foundation, Inc.
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+if [ x$1 = x ]
+then
+	echo Configuration name missing. 1>&2
+	echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
+	echo "or     $0 ALIAS" 1>&2
+	echo where ALIAS is a recognized configuration type. 1>&2
+	exit 1
+fi
+
+# First pass through any local machine types.
+case $1 in
+	*local*)
+		echo $1
+		exit 0
+		;;
+	*)
+	;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  linux-gnu*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple)
+		os=
+		basic_machine=$1
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
+		| arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
+		| 580 | i960 | h8300 \
+		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+		| alpha | alphaev[4-7] | alphaev56 | alphapca5[67] \
+		| we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
+		| 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
+		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
+		| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+		| mips64vr5000 | miprs64vr5000el | mcore \
+		| sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
+		| thumb | d10v | fr30)
+		basic_machine=$basic_machine-unknown
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i[34567]86)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	# FIXME: clean up the formatting here.
+	vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
+	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
+	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+	      | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+	      | xmp-* | ymp-* \
+	      | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* | hppa2.0n-* \
+	      | alpha-* | alphaev[4-7]-* | alphaev56-* | alphapca5[67]-* \
+	      | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+	      | clipper-* | orion-* \
+	      | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+	      | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
+	      | mips64el-* | mips64orion-* | mips64orionel-* \
+	      | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+	      | mipstx39-* | mipstx39el-* | mcore-* \
+	      | f301-* | armv*-* | t3e-* \
+	      | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+	      | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* )
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-cbm
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-cbm
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-cbm
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	cray2)
+		basic_machine=cray2-cray
+		os=-unicos
+		;;
+	[ctj]90-cray)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i[34567]86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i[34567]86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i[34567]86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i[34567]86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	i386-go32 | go32)
+		basic_machine=i386-unknown
+		os=-go32
+		;;
+	i386-mingw32 | mingw32)
+		basic_machine=i386-unknown
+		os=-mingw32
+		;;
+	i386-qnx | qnx)
+		basic_machine=i386-qnx
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mipsel*-linux*)
+		basic_machine=mipsel-unknown
+		os=-linux-gnu
+		;;
+	mips*-linux*)
+		basic_machine=mips-unknown
+		os=-linux-gnu
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	msdos)
+		basic_machine=i386-unknown
+		os=-msdos
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+        pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pentium | p5 | k5 | k6 | nexen)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexen-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=rs6000-ibm
+		;;
+	ppc)	basic_machine=powerpc-unknown
+	        ;;
+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+	        ;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sparclite-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=t3e-cray
+		os=-unicos
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+               basic_machine=f301-fujitsu
+               ;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xmp)
+		basic_machine=xmp-cray
+		os=-unicos
+		;;
+        xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	mips)
+		if [ x$os = x-linux-gnu ]; then
+			basic_machine=mips-unknown
+		else
+			basic_machine=mips-mips
+		fi
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sparc | sparcv9)
+		basic_machine=sparc-sun
+		;;
+        cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	c4x*)
+		basic_machine=c4x-none
+		os=-coff
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -rhapsody* | -opened* | -openstep* | -oskit*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -macos* | -mpw* | -magic* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-ns2 )
+	        os=-nextstep2
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+        -qnx)
+		os=-qnx4
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+        -*mint | -*MiNT)
+	        os=-mint
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+        pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+        *-gould)
+		os=-sysv
+		;;
+        *-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+        *-sgi)
+		os=-irix
+		;;
+        *-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f301-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-vxsim* | -vxworks*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -*MiNT)
+				vendor=atari
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
diff --git a/srclib/pcre/configure.in b/srclib/pcre/configure.in
new file mode 100644
index 0000000000..a947f19d2d
--- /dev/null
+++ b/srclib/pcre/configure.in
@@ -0,0 +1,75 @@
+dnl Process this file with autoconf to produce a configure script.
+
+dnl This is required at the start; the name is the name of a file
+dnl it should be seeing, to verify it is in the same directory.
+
+AC_INIT(dftables.c)
+
+dnl Arrange to build config.h from config.in. Note that pcre.h is
+dnl built differently, as it is just a "substitution" file.
+dnl Manual says this macro should come right after AC_INIT.
+AC_CONFIG_HEADER(config.h:config.in)
+
+dnl Provide the current PCRE version information. Do not use numbers
+dnl with leading zeros for the minor version, as they end up in a C
+dnl macro, and may be treated as octal constants. Stick to single
+dnl digits for minor numbers less than 10. There are unlikely to be
+dnl that many releases anyway.
+
+PCRE_MAJOR=3
+PCRE_MINOR=1
+PCRE_DATE=09-Feb-2000
+PCRE_VERSION=${PCRE_MAJOR}.${PCRE_MINOR}
+
+dnl Provide versioning information for libtool shared libraries that
+dnl are built by default on Unix systems.
+
+PCRE_LIB_VERSION=0:0:0
+PCRE_POSIXLIB_VERSION=0:0:0
+
+dnl Checks for programs.
+
+AC_PROG_CC
+AC_PROG_RANLIB
+
+dnl Checks for header files.
+
+AC_HEADER_STDC
+AC_CHECK_HEADERS(limits.h)
+
+dnl Checks for typedefs, structures, and compiler characteristics.
+
+AC_C_CONST
+AC_TYPE_SIZE_T
+
+dnl Checks for library functions.
+
+AC_CHECK_FUNCS(memmove strerror)
+
+dnl Handle --enable-shared-libraries
+
+LIBTOOL=libtool
+LIBSUFFIX=la
+AC_ARG_ENABLE(shared,
+[  --disable-shared        build PCRE as a static library],
+if test "$enableval" = "no"; then
+  LIBTOOL=
+  LIBSUFFIX=a
+fi
+)
+
+dnl "Export" these variables
+
+AC_SUBST(HAVE_MEMMOVE)
+AC_SUBST(HAVE_STRERROR)
+AC_SUBST(LIBTOOL)
+AC_SUBST(LIBSUFFIX)
+AC_SUBST(PCRE_MAJOR)
+AC_SUBST(PCRE_MINOR)
+AC_SUBST(PCRE_DATE)
+AC_SUBST(PCRE_VERSION)
+AC_SUBST(PCRE_LIB_VERSION)
+AC_SUBST(PCRE_POSIXLIB_VERSION)
+
+dnl This must be last; it determines what files are written
+AC_OUTPUT(Makefile pcre.h:pcre.in pcre-config,[chmod a+x pcre-config])
diff --git a/srclib/pcre/dftables.c b/srclib/pcre/dftables.c
new file mode 100644
index 0000000000..d572dfd3e6
--- /dev/null
+++ b/srclib/pcre/dftables.c
@@ -0,0 +1,148 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+/*
+PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language.
+
+Written by: Philip Hazel <ph10@cam.ac.uk>
+
+           Copyright (c) 1997-2000 University of Cambridge
+
+-----------------------------------------------------------------------------
+Permission is granted to anyone to use this software for any purpose on any
+computer system, and to redistribute it freely, subject to the following
+restrictions:
+
+1. This software is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+2. The origin of this software must not be misrepresented, either by
+   explicit claim or by omission.
+
+3. Altered versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+
+4. If PCRE is embedded in any software that is released under the GNU
+   General Purpose Licence (GPL), then the terms of that licence shall
+   supersede any condition above with which it is incompatible.
+-----------------------------------------------------------------------------
+
+See the file Tech.Notes for some information on the internals.
+*/
+
+
+/* This is a support program to generate the file chartables.c, containing
+character tables of various kinds. They are built according to the default C
+locale and used as the default tables by PCRE. Now that pcre_maketables is
+a function visible to the outside world, we make use of its code from here in
+order to be consistent. */
+
+#include <ctype.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "internal.h"
+
+#define DFTABLES          /* maketables.c notices this */
+#include "maketables.c"
+
+
+int main(void)
+{
+int i;
+unsigned const char *tables = pcre_maketables();
+
+printf(
+  "/*************************************************\n"
+  "*      Perl-Compatible Regular Expressions       *\n"
+  "*************************************************/\n\n"
+  "/* This file is automatically written by the dftables auxiliary \n"
+  "program. If you edit it by hand, you might like to edit the Makefile to \n"
+  "prevent its ever being regenerated.\n\n"
+  "This file is #included in the compilation of pcre.c to build the default\n"
+  "character tables which are used when no tables are passed to the compile\n"
+  "function. */\n\n"
+  "static unsigned char pcre_default_tables[] = {\n\n"
+  "/* This table is a lower casing table. */\n\n");
+
+printf("  ");
+for (i = 0; i < 256; i++)
+  {
+  if ((i & 7) == 0 && i != 0) printf("\n  ");
+  printf("%3d", *tables++);
+  if (i != 255) printf(",");
+  }
+printf(",\n\n");
+
+printf("/* This table is a case flipping table. */\n\n");
+
+printf("  ");
+for (i = 0; i < 256; i++)
+  {
+  if ((i & 7) == 0 && i != 0) printf("\n  ");
+  printf("%3d", *tables++);
+  if (i != 255) printf(",");
+  }
+printf(",\n\n");
+
+printf(
+  "/* This table contains bit maps for various character classes.\n"
+  "Each map is 32 bytes long and the bits run from the least\n"
+  "significant end of each byte. The classes that have their own\n"
+  "maps are: space, xdigit, digit, upper, lower, word, graph\n"
+  "print, punct, and cntrl. Other classes are built from combinations. */\n\n");
+
+printf("  ");
+for (i = 0; i < cbit_length; i++)
+  {
+  if ((i & 7) == 0 && i != 0)
+    {
+    if ((i & 31) == 0) printf("\n");
+    printf("\n  ");
+    }
+  printf("0x%02x", *tables++);
+  if (i != cbit_length - 1) printf(",");
+  }
+printf(",\n\n");
+
+printf(
+  "/* This table identifies various classes of character by individual bits:\n"
+  "  0x%02x   white space character\n"
+  "  0x%02x   letter\n"
+  "  0x%02x   decimal digit\n"
+  "  0x%02x   hexadecimal digit\n"
+  "  0x%02x   alphanumeric or '_'\n"
+  "  0x%02x   regular expression metacharacter or binary zero\n*/\n\n",
+  ctype_space, ctype_letter, ctype_digit, ctype_xdigit, ctype_word,
+  ctype_meta);
+
+printf("  ");
+for (i = 0; i < 256; i++)
+  {
+  if ((i & 7) == 0 && i != 0)
+    {
+    printf(" /* ");
+    if (isprint(i-8)) printf(" %c -", i-8);
+      else printf("%3d-", i-8);
+    if (isprint(i-1)) printf(" %c ", i-1);
+      else printf("%3d", i-1);
+    printf(" */\n  ");
+    }
+  printf("0x%02x", *tables++);
+  if (i != 255) printf(",");
+  }
+
+printf("};/* ");
+if (isprint(i-8)) printf(" %c -", i-8);
+  else printf("%3d-", i-8);
+if (isprint(i-1)) printf(" %c ", i-1);
+  else printf("%3d", i-1);
+printf(" */\n\n/* End of chartables.c */\n");
+
+return 0;
+}
+
+/* End of dftables.c */
diff --git a/srclib/pcre/dll.mk b/srclib/pcre/dll.mk
new file mode 100644
index 0000000000..d8b728e57e
--- /dev/null
+++ b/srclib/pcre/dll.mk
@@ -0,0 +1,60 @@
+# dll.mk - auxilary Makefile to easy build dll's for mingw32 target
+# ver. 0.6 of 1999-03-25
+#
+# Homepage of this makefile - http://www.is.lg.ua/~paul/devel/
+# Homepage of original mingw32 project -
+#		      http://www.fu.is.saga-u.ac.jp/~colin/gcc.html
+#
+# How to use:
+# This makefile can:
+# 1. Create automatical .def file from list of objects
+# 2. Create .dll from objects and .def file, either automatical, or your
+#    hand-written (maybe) file, which must have same basename as dll
+# WARNING! There MUST be object, which name match dll's name. Make sux.
+# 3. Create import library from .def (as for .dll, only its name required,
+#    not dll itself)
+#    By convention implibs for dll have .dll.a suffix, e.g. libstuff.dll.a
+#    Why not just libstuff.a? 'Cos that's name for static lib, ok?
+# Process divided into 3 phases because:
+# 1. Pre-existent .def possible
+# 2. Generating implib is enough time-consuming
+#
+# Variables:
+#   DLL_LDLIBS  - libs for linking dll
+#   DLL_LDFLAGS - flags for linking dll
+#
+# By using $(DLL_SUFFIX) instead of 'dll', e.g. stuff.$(DLL_SUFFIX)
+# you may help porting makefiles to other platforms
+#
+# Put this file in your make's include path (e.g. main include dir, for
+# more information see include section in make doc). Put in the beginning
+# of your own Makefile line "include dll.mk". Specify dependences, e.g.:
+#
+# Do all stuff in one step
+# libstuff.dll.a: $(OBJECTS) stuff.def
+# stuff.def: $(OBJECTS)
+#
+# Steps separated, pre-provided .def, link with user32
+#
+# DLL_LDLIBS=-luser32
+# stuff.dll: $(OBJECTS)
+# libstuff.dll.a: $(OBJECTS)
+
+
+DLLWRAP=dllwrap
+DLLTOOL=dlltool
+
+DLL_SUFFIX=dll
+
+.SUFFIXES: .o .$(DLL_SUFFIX)
+
+_%.def: %.o
+      $(DLLTOOL) --export-all --output-def $@ $^
+
+%.$(DLL_SUFFIX): %.o
+      $(DLLWRAP) --dllname $(notdir $@) --driver-name $(CC) --def $*.def -o $@ $(filter %.o,$^) $(DLL_LDFLAGS) $(DLL_LDLIBS)
+
+lib%.$(DLL_SUFFIX).a:%.def
+      $(DLLTOOL) --dllname $(notdir $*.dll) --def $< --output-lib $@
+
+# End
diff --git a/srclib/pcre/doc/Tech.Notes b/srclib/pcre/doc/Tech.Notes
new file mode 100644
index 0000000000..03904db3cc
--- /dev/null
+++ b/srclib/pcre/doc/Tech.Notes
@@ -0,0 +1,242 @@
+Technical Notes about PCRE
+--------------------------
+
+Many years ago I implemented some regular expression functions to an algorithm
+suggested by Martin Richards. These were not Unix-like in form, and were quite
+restricted in what they could do by comparison with Perl. The interesting part
+about the algorithm was that the amount of space required to hold the compiled
+form of an expression was known in advance. The code to apply an expression did
+not operate by backtracking, as the Henry Spencer and Perl code does, but
+instead checked all possibilities simultaneously by keeping a list of current
+states and checking all of them as it advanced through the subject string. (In
+the terminology of Jeffrey Friedl's book, it was a "DFA algorithm".) When the
+pattern was all used up, all remaining states were possible matches, and the
+one matching the longest subset of the subject string was chosen. This did not
+necessarily maximize the individual wild portions of the pattern, as is
+expected in Unix and Perl-style regular expressions.
+
+By contrast, the code originally written by Henry Spencer and subsequently
+heavily modified for Perl actually compiles the expression twice: once in a
+dummy mode in order to find out how much store will be needed, and then for
+real. The execution function operates by backtracking and maximizing (or,
+optionally, minimizing in Perl) the amount of the subject that matches
+individual wild portions of the pattern. This is an "NFA algorithm" in Friedl's
+terminology.
+
+For the set of functions that forms PCRE (which are unrelated to those
+mentioned above), I tried at first to invent an algorithm that used an amount
+of store bounded by a multiple of the number of characters in the pattern, to
+save on compiling time. However, because of the greater complexity in Perl
+regular expressions, I couldn't do this. In any case, a first pass through the
+pattern is needed, in order to find internal flag settings like (?i) at top
+level. So PCRE works by running a very degenerate first pass to calculate a
+maximum store size, and then a second pass to do the real compile - which may
+use a bit less than the predicted amount of store. The idea is that this is
+going to turn out faster because the first pass is degenerate and the second
+pass can just store stuff straight into the vector. It does make the compiling
+functions bigger, of course, but they have got quite big anyway to handle all
+the Perl stuff.
+
+The compiled form of a pattern is a vector of bytes, containing items of
+variable length. The first byte in an item is an opcode, and the length of the
+item is either implicit in the opcode or contained in the data bytes which
+follow it. A list of all the opcodes follows:
+
+Opcodes with no following data
+------------------------------
+
+These items are all just one byte long
+
+  OP_END                 end of pattern
+  OP_ANY                 match any character
+  OP_SOD                 match start of data: \A
+  OP_CIRC                ^ (start of data, or after \n in multiline)
+  OP_NOT_WORD_BOUNDARY   \W
+  OP_WORD_BOUNDARY       \w
+  OP_NOT_DIGIT           \D
+  OP_DIGIT               \d
+  OP_NOT_WHITESPACE      \S
+  OP_WHITESPACE          \s
+  OP_NOT_WORDCHAR        \W
+  OP_WORDCHAR            \w
+  OP_EODN                match end of data or \n at end: \Z
+  OP_EOD                 match end of data: \z
+  OP_DOLL                $ (end of data, or before \n in multiline)
+  OP_RECURSE             match the pattern recursively
+
+
+Repeating single characters
+---------------------------
+
+The common repeats (*, +, ?) when applied to a single character appear as
+two-byte items using the following opcodes:
+
+  OP_STAR
+  OP_MINSTAR
+  OP_PLUS
+  OP_MINPLUS
+  OP_QUERY
+  OP_MINQUERY
+
+Those with "MIN" in their name are the minimizing versions. Each is followed by
+the character that is to be repeated. Other repeats make use of
+
+  OP_UPTO
+  OP_MINUPTO
+  OP_EXACT
+
+which are followed by a two-byte count (most significant first) and the
+repeated character. OP_UPTO matches from 0 to the given number. A repeat with a
+non-zero minimum and a fixed maximum is coded as an OP_EXACT followed by an
+OP_UPTO (or OP_MINUPTO).
+
+
+Repeating character types
+-------------------------
+
+Repeats of things like \d are done exactly as for single characters, except
+that instead of a character, the opcode for the type is stored in the data
+byte. The opcodes are:
+
+  OP_TYPESTAR
+  OP_TYPEMINSTAR
+  OP_TYPEPLUS
+  OP_TYPEMINPLUS
+  OP_TYPEQUERY
+  OP_TYPEMINQUERY
+  OP_TYPEUPTO
+  OP_TYPEMINUPTO
+  OP_TYPEEXACT
+
+
+Matching a character string
+---------------------------
+
+The OP_CHARS opcode is followed by a one-byte count and then that number of
+characters. If there are more than 255 characters in sequence, successive
+instances of OP_CHARS are used.
+
+
+Character classes
+-----------------
+
+OP_CLASS is used for a character class, provided there are at least two
+characters in the class. If there is only one character, OP_CHARS is used for a
+positive class, and OP_NOT for a negative one (that is, for something like
+[^a]). Another set of repeating opcodes (OP_NOTSTAR etc.) are used for a
+repeated, negated, single-character class. The normal ones (OP_STAR etc.) are
+used for a repeated positive single-character class.
+
+OP_CLASS is followed by a 32-byte bit map containing a 1 bit for every
+character that is acceptable. The bits are counted from the least significant
+end of each byte.
+
+
+Back references
+---------------
+
+OP_REF is followed by a single byte containing the reference number.
+
+
+Repeating character classes and back references
+-----------------------------------------------
+
+Single-character classes are handled specially (see above). This applies to
+OP_CLASS and OP_REF. In both cases, the repeat information follows the base
+item. The matching code looks at the following opcode to see if it is one of
+
+  OP_CRSTAR
+  OP_CRMINSTAR
+  OP_CRPLUS
+  OP_CRMINPLUS
+  OP_CRQUERY
+  OP_CRMINQUERY
+  OP_CRRANGE
+  OP_CRMINRANGE
+
+All but the last two are just single-byte items. The others are followed by
+four bytes of data, comprising the minimum and maximum repeat counts.
+
+
+Brackets and alternation
+------------------------
+
+A pair of non-capturing (round) brackets is wrapped round each expression at
+compile time, so alternation always happens in the context of brackets.
+Non-capturing brackets use the opcode OP_BRA, while capturing brackets use
+OP_BRA+1, OP_BRA+2, etc. [Note for North Americans: "bracket" to some English
+speakers, including myself, can be round, square, curly, or pointy. Hence this
+usage.]
+
+A bracket opcode is followed by two bytes which give the offset to the next
+alternative OP_ALT or, if there aren't any branches, to the matching KET
+opcode. Each OP_ALT is followed by two bytes giving the offset to the next one,
+or to the KET opcode.
+
+OP_KET is used for subpatterns that do not repeat indefinitely, while
+OP_KETRMIN and OP_KETRMAX are used for indefinite repetitions, minimally or
+maximally respectively. All three are followed by two bytes giving (as a
+positive number) the offset back to the matching BRA opcode.
+
+If a subpattern is quantified such that it is permitted to match zero times, it
+is preceded by one of OP_BRAZERO or OP_BRAMINZERO. These are single-byte
+opcodes which tell the matcher that skipping this subpattern entirely is a
+valid branch.
+
+A subpattern with an indefinite maximum repetition is replicated in the
+compiled data its minimum number of times (or once with a BRAZERO if the
+minimum is zero), with the final copy terminating with a KETRMIN or KETRMAX as
+appropriate.
+
+A subpattern with a bounded maximum repetition is replicated in a nested
+fashion up to the maximum number of times, with BRAZERO or BRAMINZERO before
+each replication after the minimum, so that, for example, (abc){2,5} is
+compiled as (abc)(abc)((abc)((abc)(abc)?)?)?. The 200-bracket limit does not
+apply to these internally generated brackets.
+
+
+Assertions
+----------
+
+Forward assertions are just like other subpatterns, but starting with one of
+the opcodes OP_ASSERT or OP_ASSERT_NOT. Backward assertions use the opcodes
+OP_ASSERTBACK and OP_ASSERTBACK_NOT, and the first opcode inside the assertion
+is OP_REVERSE, followed by a two byte count of the number of characters to move
+back the pointer in the subject string. A separate count is present in each
+alternative of a lookbehind assertion, allowing them to have different fixed
+lengths.
+
+
+Once-only subpatterns
+---------------------
+
+These are also just like other subpatterns, but they start with the opcode
+OP_ONCE.
+
+
+Conditional subpatterns
+-----------------------
+
+These are like other subpatterns, but they start with the opcode OP_COND. If
+the condition is a back reference, this is stored at the start of the
+subpattern using the opcode OP_CREF followed by one byte containing the
+reference number. Otherwise, a conditional subpattern will always start with
+one of the assertions.
+
+
+Changing options
+----------------
+
+If any of the /i, /m, or /s options are changed within a parenthesized group,
+an OP_OPT opcode is compiled, followed by one byte containing the new settings
+of these flags. If there are several alternatives in a group, there is an
+occurrence of OP_OPT at the start of all those following the first options
+change, to set appropriate options for the start of the alternative.
+Immediately after the end of the group there is another such item to reset the
+flags to their previous values. Other changes of flag within the pattern can be
+handled entirely at compile time, and so do not cause anything to be put into
+the compiled data.
+
+
+Philip Hazel
+February 2000
diff --git a/srclib/pcre/doc/pcre.3 b/srclib/pcre/doc/pcre.3
new file mode 100644
index 0000000000..bd435e9ecd
--- /dev/null
+++ b/srclib/pcre/doc/pcre.3
@@ -0,0 +1,1702 @@
+.TH PCRE 3
+.SH NAME
+pcre - Perl-compatible regular expressions.
+.SH SYNOPSIS
+.B #include <pcre.h>
+.PP
+.SM
+.br
+.B pcre *pcre_compile(const char *\fIpattern\fR, int \fIoptions\fR,
+.ti +5n
+.B const char **\fIerrptr\fR, int *\fIerroffset\fR,
+.ti +5n
+.B const unsigned char *\fItableptr\fR);
+.PP
+.br
+.B pcre_extra *pcre_study(const pcre *\fIcode\fR, int \fIoptions\fR,
+.ti +5n
+.B const char **\fIerrptr\fR);
+.PP
+.br
+.B int pcre_exec(const pcre *\fIcode\fR, "const pcre_extra *\fIextra\fR,"
+.ti +5n
+.B "const char *\fIsubject\fR," int \fIlength\fR, int \fIstartoffset\fR,
+.ti +5n
+.B int \fIoptions\fR, int *\fIovector\fR, int \fIovecsize\fR);
+.PP
+.br
+.B int pcre_copy_substring(const char *\fIsubject\fR, int *\fIovector\fR,
+.ti +5n
+.B int \fIstringcount\fR, int \fIstringnumber\fR, char *\fIbuffer\fR,
+.ti +5n
+.B int \fIbuffersize\fR);
+.PP
+.br
+.B int pcre_get_substring(const char *\fIsubject\fR, int *\fIovector\fR,
+.ti +5n
+.B int \fIstringcount\fR, int \fIstringnumber\fR,
+.ti +5n
+.B const char **\fIstringptr\fR);
+.PP
+.br
+.B int pcre_get_substring_list(const char *\fIsubject\fR,
+.ti +5n
+.B int *\fIovector\fR, int \fIstringcount\fR, "const char ***\fIlistptr\fR);"
+.PP
+.br
+.B const unsigned char *pcre_maketables(void);
+.PP
+.br
+.B int pcre_fullinfo(const pcre *\fIcode\fR, "const pcre_extra *\fIextra\fR,"
+.ti +5n
+.B int \fIwhat\fR, void *\fIwhere\fR);
+.PP
+.br
+.B int pcre_info(const pcre *\fIcode\fR, int *\fIoptptr\fR, int
+.B *\fIfirstcharptr\fR);
+.PP
+.br
+.B char *pcre_version(void);
+.PP
+.br
+.B void *(*pcre_malloc)(size_t);
+.PP
+.br
+.B void (*pcre_free)(void *);
+
+
+
+.SH DESCRIPTION
+The PCRE library is a set of functions that implement regular expression
+pattern matching using the same syntax and semantics as Perl 5, with just a few
+differences (see below). The current implementation corresponds to Perl 5.005,
+with some additional features from the Perl development release.
+
+PCRE has its own native API, which is described in this document. There is also
+a set of wrapper functions that correspond to the POSIX regular expression API.
+These are described in the \fBpcreposix\fR documentation.
+
+The native API function prototypes are defined in the header file \fBpcre.h\fR,
+and on Unix systems the library itself is called \fBlibpcre.a\fR, so can be
+accessed by adding \fB-lpcre\fR to the command for linking an application which
+calls it. The header file defines the macros PCRE_MAJOR and PCRE_MINOR to
+contain the major and minor release numbers for the library. Applications can
+use these to include support for different releases.
+
+The functions \fBpcre_compile()\fR, \fBpcre_study()\fR, and \fBpcre_exec()\fR
+are used for compiling and matching regular expressions, while
+\fBpcre_copy_substring()\fR, \fBpcre_get_substring()\fR, and
+\fBpcre_get_substring_list()\fR are convenience functions for extracting
+captured substrings from a matched subject string. The function
+\fBpcre_maketables()\fR is used (optionally) to build a set of character tables
+in the current locale for passing to \fBpcre_compile()\fR.
+
+The function \fBpcre_fullinfo()\fR is used to find out information about a
+compiled pattern; \fBpcre_info()\fR is an obsolete version which returns only
+some of the available information, but is retained for backwards compatibility.
+The function \fBpcre_version()\fR returns a pointer to a string containing the
+version of PCRE and its date of release.
+
+The global variables \fBpcre_malloc\fR and \fBpcre_free\fR initially contain
+the entry points of the standard \fBmalloc()\fR and \fBfree()\fR functions
+respectively. PCRE calls the memory management functions via these variables,
+so a calling program can replace them if it wishes to intercept the calls. This
+should be done before calling any PCRE functions.
+
+
+.SH MULTI-THREADING
+The PCRE functions can be used in multi-threading applications, with the
+proviso that the memory management functions pointed to by \fBpcre_malloc\fR
+and \fBpcre_free\fR are shared by all threads.
+
+The compiled form of a regular expression is not altered during matching, so
+the same compiled pattern can safely be used by several threads at once.
+
+
+.SH COMPILING A PATTERN
+The function \fBpcre_compile()\fR is called to compile a pattern into an
+internal form. The pattern is a C string terminated by a binary zero, and
+is passed in the argument \fIpattern\fR. A pointer to a single block of memory
+that is obtained via \fBpcre_malloc\fR is returned. This contains the
+compiled code and related data. The \fBpcre\fR type is defined for this for
+convenience, but in fact \fBpcre\fR is just a typedef for \fBvoid\fR, since the
+contents of the block are not externally defined. It is up to the caller to
+free the memory when it is no longer required.
+.PP
+The size of a compiled pattern is roughly proportional to the length of the
+pattern string, except that each character class (other than those containing
+just a single character, negated or not) requires 33 bytes, and repeat
+quantifiers with a minimum greater than one or a bounded maximum cause the
+relevant portions of the compiled pattern to be replicated.
+.PP
+The \fIoptions\fR argument contains independent bits that affect the
+compilation. It should be zero if no options are required. Some of the options,
+in particular, those that are compatible with Perl, can also be set and unset
+from within the pattern (see the detailed description of regular expressions
+below). For these options, the contents of the \fIoptions\fR argument specifies
+their initial settings at the start of compilation and execution. The
+PCRE_ANCHORED option can be set at the time of matching as well as at compile
+time.
+.PP
+If \fIerrptr\fR is NULL, \fBpcre_compile()\fR returns NULL immediately.
+Otherwise, if compilation of a pattern fails, \fBpcre_compile()\fR returns
+NULL, and sets the variable pointed to by \fIerrptr\fR to point to a textual
+error message. The offset from the start of the pattern to the character where
+the error was discovered is placed in the variable pointed to by
+\fIerroffset\fR, which must not be NULL. If it is, an immediate error is given.
+.PP
+If the final argument, \fItableptr\fR, is NULL, PCRE uses a default set of
+character tables which are built when it is compiled, using the default C
+locale. Otherwise, \fItableptr\fR must be the result of a call to
+\fBpcre_maketables()\fR. See the section on locale support below.
+.PP
+The following option bits are defined in the header file:
+
+  PCRE_ANCHORED
+
+If this bit is set, the pattern is forced to be "anchored", that is, it is
+constrained to match only at the start of the string which is being searched
+(the "subject string"). This effect can also be achieved by appropriate
+constructs in the pattern itself, which is the only way to do it in Perl.
+
+  PCRE_CASELESS
+
+If this bit is set, letters in the pattern match both upper and lower case
+letters. It is equivalent to Perl's /i option.
+
+  PCRE_DOLLAR_ENDONLY
+
+If this bit is set, a dollar metacharacter in the pattern matches only at the
+end of the subject string. Without this option, a dollar also matches
+immediately before the final character if it is a newline (but not before any
+other newlines). The PCRE_DOLLAR_ENDONLY option is ignored if PCRE_MULTILINE is
+set. There is no equivalent to this option in Perl.
+
+  PCRE_DOTALL
+
+If this bit is set, a dot metacharater in the pattern matches all characters,
+including newlines. Without it, newlines are excluded. This option is
+equivalent to Perl's /s option. A negative class such as [^a] always matches a
+newline character, independent of the setting of this option.
+
+  PCRE_EXTENDED
+
+If this bit is set, whitespace data characters in the pattern are totally
+ignored except when escaped or inside a character class, and characters between
+an unescaped # outside a character class and the next newline character,
+inclusive, are also ignored. This is equivalent to Perl's /x option, and makes
+it possible to include comments inside complicated patterns. Note, however,
+that this applies only to data characters. Whitespace characters may never
+appear within special character sequences in a pattern, for example within the
+sequence (?( which introduces a conditional subpattern.
+
+  PCRE_EXTRA
+
+This option was invented in order to turn on additional functionality of PCRE
+that is incompatible with Perl, but it is currently of very little use. When
+set, any backslash in a pattern that is followed by a letter that has no
+special meaning causes an error, thus reserving these combinations for future
+expansion. By default, as in Perl, a backslash followed by a letter with no
+special meaning is treated as a literal. There are at present no other features
+controlled by this option. It can also be set by a (?X) option setting within a
+pattern.
+
+  PCRE_MULTILINE
+
+By default, PCRE treats the subject string as consisting of a single "line" of
+characters (even if it actually contains several newlines). The "start of line"
+metacharacter (^) matches only at the start of the string, while the "end of
+line" metacharacter ($) matches only at the end of the string, or before a
+terminating newline (unless PCRE_DOLLAR_ENDONLY is set). This is the same as
+Perl.
+
+When PCRE_MULTILINE it is set, the "start of line" and "end of line" constructs
+match immediately following or immediately before any newline in the subject
+string, respectively, as well as at the very start and end. This is equivalent
+to Perl's /m option. If there are no "\\n" characters in a subject string, or
+no occurrences of ^ or $ in a pattern, setting PCRE_MULTILINE has no
+effect.
+
+  PCRE_UNGREEDY
+
+This option inverts the "greediness" of the quantifiers so that they are not
+greedy by default, but become greedy if followed by "?". It is not compatible
+with Perl. It can also be set by a (?U) option setting within the pattern.
+
+
+.SH STUDYING A PATTERN
+When a pattern is going to be used several times, it is worth spending more
+time analyzing it in order to speed up the time taken for matching. The
+function \fBpcre_study()\fR takes a pointer to a compiled pattern as its first
+argument, and returns a pointer to a \fBpcre_extra\fR block (another \fBvoid\fR
+typedef) containing additional information about the pattern; this can be
+passed to \fBpcre_exec()\fR. If no additional information is available, NULL
+is returned.
+
+The second argument contains option bits. At present, no options are defined
+for \fBpcre_study()\fR, and this argument should always be zero.
+
+The third argument for \fBpcre_study()\fR is a pointer to an error message. If
+studying succeeds (even if no data is returned), the variable it points to is
+set to NULL. Otherwise it points to a textual error message.
+
+At present, studying a pattern is useful only for non-anchored patterns that do
+not have a single fixed starting character. A bitmap of possible starting
+characters is created.
+
+
+.SH LOCALE SUPPORT
+PCRE handles caseless matching, and determines whether characters are letters,
+digits, or whatever, by reference to a set of tables. The library contains a
+default set of tables which is created in the default C locale when PCRE is
+compiled. This is used when the final argument of \fBpcre_compile()\fR is NULL,
+and is sufficient for many applications.
+
+An alternative set of tables can, however, be supplied. Such tables are built
+by calling the \fBpcre_maketables()\fR function, which has no arguments, in the
+relevant locale. The result can then be passed to \fBpcre_compile()\fR as often
+as necessary. For example, to build and use tables that are appropriate for the
+French locale (where accented characters with codes greater than 128 are
+treated as letters), the following code could be used:
+
+  setlocale(LC_CTYPE, "fr");
+  tables = pcre_maketables();
+  re = pcre_compile(..., tables);
+
+The tables are built in memory that is obtained via \fBpcre_malloc\fR. The
+pointer that is passed to \fBpcre_compile\fR is saved with the compiled
+pattern, and the same tables are used via this pointer by \fBpcre_study()\fR
+and \fBpcre_exec()\fR. Thus for any single pattern, compilation, studying and
+matching all happen in the same locale, but different patterns can be compiled
+in different locales. It is the caller's responsibility to ensure that the
+memory containing the tables remains available for as long as it is needed.
+
+
+.SH INFORMATION ABOUT A PATTERN
+The \fBpcre_fullinfo()\fR function returns information about a compiled
+pattern. It replaces the obsolete \fBpcre_info()\fR function, which is
+nevertheless retained for backwards compability (and is documented below).
+
+The first argument for \fBpcre_fullinfo()\fR is a pointer to the compiled
+pattern. The second argument is the result of \fBpcre_study()\fR, or NULL if
+the pattern was not studied. The third argument specifies which piece of
+information is required, while the fourth argument is a pointer to a variable
+to receive the data. The yield of the function is zero for success, or one of
+the following negative numbers:
+
+  PCRE_ERROR_NULL       the argument \fIcode\fR was NULL
+                        the argument \fIwhere\fR was NULL
+  PCRE_ERROR_BADMAGIC   the "magic number" was not found
+  PCRE_ERROR_BADOPTION  the value of \fIwhat\fR was invalid
+
+The possible values for the third argument are defined in \fBpcre.h\fR, and are
+as follows:
+
+  PCRE_INFO_OPTIONS
+
+Return a copy of the options with which the pattern was compiled. The fourth
+argument should point to au \fBunsigned long int\fR variable. These option bits
+are those specified in the call to \fBpcre_compile()\fR, modified by any
+top-level option settings within the pattern itself, and with the PCRE_ANCHORED
+bit forcibly set if the form of the pattern implies that it can match only at
+the start of a subject string.
+
+  PCRE_INFO_SIZE
+
+Return the size of the compiled pattern, that is, the value that was passed as
+the argument to \fBpcre_malloc()\fR when PCRE was getting memory in which to
+place the compiled data. The fourth argument should point to a \fBsize_t\fR
+variable.
+
+  PCRE_INFO_CAPTURECOUNT
+
+Return the number of capturing subpatterns in the pattern. The fourth argument
+should point to an \fbint\fR variable.
+
+  PCRE_INFO_BACKREFMAX
+
+Return the number of the highest back reference in the pattern. The fourth
+argument should point to an \fBint\fR variable. Zero is returned if there are
+no back references.
+
+  PCRE_INFO_FIRSTCHAR
+
+Return information about the first character of any matched string, for a
+non-anchored pattern. If there is a fixed first character, e.g. from a pattern
+such as (cat|cow|coyote), then it is returned in the integer pointed to by
+\fIwhere\fR. Otherwise, if either
+
+(a) the pattern was compiled with the PCRE_MULTILINE option, and every branch
+starts with "^", or
+
+(b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not set
+(if it were set, the pattern would be anchored),
+
+then -1 is returned, indicating that the pattern matches only at the
+start of a subject string or after any "\\n" within the string. Otherwise -2 is
+returned. For anchored patterns, -2 is returned.
+
+  PCRE_INFO_FIRSTTABLE
+
+If the pattern was studied, and this resulted in the construction of a 256-bit
+table indicating a fixed set of characters for the first character in any
+matching string, a pointer to the table is returned. Otherwise NULL is
+returned. The fourth argument should point to an \fBunsigned char *\fR
+variable.
+
+  PCRE_INFO_LASTLITERAL
+
+For a non-anchored pattern, return the value of the rightmost literal character
+which must exist in any matched string, other than at its start. The fourth
+argument should point to an \fBint\fR variable. If there is no such character,
+or if the pattern is anchored, -1 is returned. For example, for the pattern
+/a\\d+z\\d+/ the returned value is 'z'.
+
+The \fBpcre_info()\fR function is now obsolete because its interface is too
+restrictive to return all the available data about a compiled pattern. New
+programs should use \fBpcre_fullinfo()\fR instead. The yield of
+\fBpcre_info()\fR is the number of capturing subpatterns, or one of the
+following negative numbers:
+
+  PCRE_ERROR_NULL       the argument \fIcode\fR was NULL
+  PCRE_ERROR_BADMAGIC   the "magic number" was not found
+
+If the \fIoptptr\fR argument is not NULL, a copy of the options with which the
+pattern was compiled is placed in the integer it points to (see
+PCRE_INFO_OPTIONS above).
+
+If the pattern is not anchored and the \fIfirstcharptr\fR argument is not NULL,
+it is used to pass back information about the first character of any matched
+string (see PCRE_INFO_FIRSTCHAR above).
+
+
+.SH MATCHING A PATTERN
+The function \fBpcre_exec()\fR is called to match a subject string against a
+pre-compiled pattern, which is passed in the \fIcode\fR argument. If the
+pattern has been studied, the result of the study should be passed in the
+\fIextra\fR argument. Otherwise this must be NULL.
+
+The PCRE_ANCHORED option can be passed in the \fIoptions\fR argument, whose
+unused bits must be zero. However, if a pattern was compiled with
+PCRE_ANCHORED, or turned out to be anchored by virtue of its contents, it
+cannot be made unachored at matching time.
+
+There are also three further options that can be set only at matching time:
+
+  PCRE_NOTBOL
+
+The first character of the string is not the beginning of a line, so the
+circumflex metacharacter should not match before it. Setting this without
+PCRE_MULTILINE (at compile time) causes circumflex never to match.
+
+  PCRE_NOTEOL
+
+The end of the string is not the end of a line, so the dollar metacharacter
+should not match it nor (except in multiline mode) a newline immediately before
+it. Setting this without PCRE_MULTILINE (at compile time) causes dollar never
+to match.
+
+  PCRE_NOTEMPTY
+
+An empty string is not considered to be a valid match if this option is set. If
+there are alternatives in the pattern, they are tried. If all the alternatives
+match the empty string, the entire match fails. For example, if the pattern
+
+  a?b?
+
+is applied to a string not beginning with "a" or "b", it matches the empty
+string at the start of the subject. With PCRE_NOTEMPTY set, this match is not
+valid, so PCRE searches further into the string for occurrences of "a" or "b".
+
+Perl has no direct equivalent of PCRE_NOTEMPTY, but it does make a special case
+of a pattern match of the empty string within its \fBsplit()\fR function, and
+when using the /g modifier. It is possible to emulate Perl's behaviour after
+matching a null string by first trying the match again at the same offset with
+PCRE_NOTEMPTY set, and then if that fails by advancing the starting offset (see
+below) and trying an ordinary match again.
+
+The subject string is passed as a pointer in \fIsubject\fR, a length in
+\fIlength\fR, and a starting offset in \fIstartoffset\fR. Unlike the pattern
+string, it may contain binary zero characters. When the starting offset is
+zero, the search for a match starts at the beginning of the subject, and this
+is by far the most common case.
+
+A non-zero starting offset is useful when searching for another match in the
+same subject by calling \fBpcre_exec()\fR again after a previous success.
+Setting \fIstartoffset\fR differs from just passing over a shortened string and
+setting PCRE_NOTBOL in the case of a pattern that begins with any kind of
+lookbehind. For example, consider the pattern
+
+  \\Biss\\B
+
+which finds occurrences of "iss" in the middle of words. (\\B matches only if
+the current position in the subject is not a word boundary.) When applied to
+the string "Mississipi" the first call to \fBpcre_exec()\fR finds the first
+occurrence. If \fBpcre_exec()\fR is called again with just the remainder of the
+subject, namely "issipi", it does not match, because \\B is always false at the
+start of the subject, which is deemed to be a word boundary. However, if
+\fBpcre_exec()\fR is passed the entire string again, but with \fIstartoffset\fR
+set to 4, it finds the second occurrence of "iss" because it is able to look
+behind the starting point to discover that it is preceded by a letter.
+
+If a non-zero starting offset is passed when the pattern is anchored, one
+attempt to match at the given offset is tried. This can only succeed if the
+pattern does not require the match to be at the start of the subject.
+
+In general, a pattern matches a certain portion of the subject, and in
+addition, further substrings from the subject may be picked out by parts of the
+pattern. Following the usage in Jeffrey Friedl's book, this is called
+"capturing" in what follows, and the phrase "capturing subpattern" is used for
+a fragment of a pattern that picks out a substring. PCRE supports several other
+kinds of parenthesized subpattern that do not cause substrings to be captured.
+
+Captured substrings are returned to the caller via a vector of integer offsets
+whose address is passed in \fIovector\fR. The number of elements in the vector
+is passed in \fIovecsize\fR. The first two-thirds of the vector is used to pass
+back captured substrings, each substring using a pair of integers. The
+remaining third of the vector is used as workspace by \fBpcre_exec()\fR while
+matching capturing subpatterns, and is not available for passing back
+information. The length passed in \fIovecsize\fR should always be a multiple of
+three. If it is not, it is rounded down.
+
+When a match has been successful, information about captured substrings is
+returned in pairs of integers, starting at the beginning of \fIovector\fR, and
+continuing up to two-thirds of its length at the most. The first element of a
+pair is set to the offset of the first character in a substring, and the second
+is set to the offset of the first character after the end of a substring. The
+first pair, \fIovector[0]\fR and \fIovector[1]\fR, identify the portion of the
+subject string matched by the entire pattern. The next pair is used for the
+first capturing subpattern, and so on. The value returned by \fBpcre_exec()\fR
+is the number of pairs that have been set. If there are no capturing
+subpatterns, the return value from a successful match is 1, indicating that
+just the first pair of offsets has been set.
+
+Some convenience functions are provided for extracting the captured substrings
+as separate strings. These are described in the following section.
+
+It is possible for an capturing subpattern number \fIn+1\fR to match some
+part of the subject when subpattern \fIn\fR has not been used at all. For
+example, if the string "abc" is matched against the pattern (a|(z))(bc)
+subpatterns 1 and 3 are matched, but 2 is not. When this happens, both offset
+values corresponding to the unused subpattern are set to -1.
+
+If a capturing subpattern is matched repeatedly, it is the last portion of the
+string that it matched that gets returned.
+
+If the vector is too small to hold all the captured substrings, it is used as
+far as possible (up to two-thirds of its length), and the function returns a
+value of zero. In particular, if the substring offsets are not of interest,
+\fBpcre_exec()\fR may be called with \fIovector\fR passed as NULL and
+\fIovecsize\fR as zero. However, if the pattern contains back references and
+the \fIovector\fR isn't big enough to remember the related substrings, PCRE has
+to get additional memory for use during matching. Thus it is usually advisable
+to supply an \fIovector\fR.
+
+Note that \fBpcre_info()\fR can be used to find out how many capturing
+subpatterns there are in a compiled pattern. The smallest size for
+\fIovector\fR that will allow for \fIn\fR captured substrings in addition to
+the offsets of the substring matched by the whole pattern is (\fIn\fR+1)*3.
+
+If \fBpcre_exec()\fR fails, it returns a negative number. The following are
+defined in the header file:
+
+  PCRE_ERROR_NOMATCH        (-1)
+
+The subject string did not match the pattern.
+
+  PCRE_ERROR_NULL           (-2)
+
+Either \fIcode\fR or \fIsubject\fR was passed as NULL, or \fIovector\fR was
+NULL and \fIovecsize\fR was not zero.
+
+  PCRE_ERROR_BADOPTION      (-3)
+
+An unrecognized bit was set in the \fIoptions\fR argument.
+
+  PCRE_ERROR_BADMAGIC       (-4)
+
+PCRE stores a 4-byte "magic number" at the start of the compiled code, to catch
+the case when it is passed a junk pointer. This is the error it gives when the
+magic number isn't present.
+
+  PCRE_ERROR_UNKNOWN_NODE   (-5)
+
+While running the pattern match, an unknown item was encountered in the
+compiled pattern. This error could be caused by a bug in PCRE or by overwriting
+of the compiled pattern.
+
+  PCRE_ERROR_NOMEMORY       (-6)
+
+If a pattern contains back references, but the \fIovector\fR that is passed to
+\fBpcre_exec()\fR is not big enough to remember the referenced substrings, PCRE
+gets a block of memory at the start of matching to use for this purpose. If the
+call via \fBpcre_malloc()\fR fails, this error is given. The memory is freed at
+the end of matching.
+
+
+.SH EXTRACTING CAPTURED SUBSTRINGS
+Captured substrings can be accessed directly by using the offsets returned by
+\fBpcre_exec()\fR in \fIovector\fR. For convenience, the functions
+\fBpcre_copy_substring()\fR, \fBpcre_get_substring()\fR, and
+\fBpcre_get_substring_list()\fR are provided for extracting captured substrings
+as new, separate, zero-terminated strings. A substring that contains a binary
+zero is correctly extracted and has a further zero added on the end, but the
+result does not, of course, function as a C string.
+
+The first three arguments are the same for all three functions: \fIsubject\fR
+is the subject string which has just been successfully matched, \fIovector\fR
+is a pointer to the vector of integer offsets that was passed to
+\fBpcre_exec()\fR, and \fIstringcount\fR is the number of substrings that
+were captured by the match, including the substring that matched the entire
+regular expression. This is the value returned by \fBpcre_exec\fR if it
+is greater than zero. If \fBpcre_exec()\fR returned zero, indicating that it
+ran out of space in \fIovector\fR, then the value passed as
+\fIstringcount\fR should be the size of the vector divided by three.
+
+The functions \fBpcre_copy_substring()\fR and \fBpcre_get_substring()\fR
+extract a single substring, whose number is given as \fIstringnumber\fR. A
+value of zero extracts the substring that matched the entire pattern, while
+higher values extract the captured substrings. For \fBpcre_copy_substring()\fR,
+the string is placed in \fIbuffer\fR, whose length is given by
+\fIbuffersize\fR, while for \fBpcre_get_substring()\fR a new block of store is
+obtained via \fBpcre_malloc\fR, and its address is returned via
+\fIstringptr\fR. The yield of the function is the length of the string, not
+including the terminating zero, or one of
+
+  PCRE_ERROR_NOMEMORY       (-6)
+
+The buffer was too small for \fBpcre_copy_substring()\fR, or the attempt to get
+memory failed for \fBpcre_get_substring()\fR.
+
+  PCRE_ERROR_NOSUBSTRING    (-7)
+
+There is no substring whose number is \fIstringnumber\fR.
+
+The \fBpcre_get_substring_list()\fR function extracts all available substrings
+and builds a list of pointers to them. All this is done in a single block of
+memory which is obtained via \fBpcre_malloc\fR. The address of the memory block
+is returned via \fIlistptr\fR, which is also the start of the list of string
+pointers. The end of the list is marked by a NULL pointer. The yield of the
+function is zero if all went well, or
+
+  PCRE_ERROR_NOMEMORY       (-6)
+
+if the attempt to get the memory block failed.
+
+When any of these functions encounter a substring that is unset, which can
+happen when capturing subpattern number \fIn+1\fR matches some part of the
+subject, but subpattern \fIn\fR has not been used at all, they return an empty
+string. This can be distinguished from a genuine zero-length substring by
+inspecting the appropriate offset in \fIovector\fR, which is negative for unset
+substrings.
+
+
+
+.SH LIMITATIONS
+There are some size limitations in PCRE but it is hoped that they will never in
+practice be relevant.
+The maximum length of a compiled pattern is 65539 (sic) bytes.
+All values in repeating quantifiers must be less than 65536.
+The maximum number of capturing subpatterns is 99.
+The maximum number of all parenthesized subpatterns, including capturing
+subpatterns, assertions, and other types of subpattern, is 200.
+
+The maximum length of a subject string is the largest positive number that an
+integer variable can hold. However, PCRE uses recursion to handle subpatterns
+and indefinite repetition. This means that the available stack space may limit
+the size of a subject string that can be processed by certain patterns.
+
+
+.SH DIFFERENCES FROM PERL
+The differences described here are with respect to Perl 5.005.
+
+1. By default, a whitespace character is any character that the C library
+function \fBisspace()\fR recognizes, though it is possible to compile PCRE with
+alternative character type tables. Normally \fBisspace()\fR matches space,
+formfeed, newline, carriage return, horizontal tab, and vertical tab. Perl 5
+no longer includes vertical tab in its set of whitespace characters. The \\v
+escape that was in the Perl documentation for a long time was never in fact
+recognized. However, the character itself was treated as whitespace at least
+up to 5.002. In 5.004 and 5.005 it does not match \\s.
+
+2. PCRE does not allow repeat quantifiers on lookahead assertions. Perl permits
+them, but they do not mean what you might think. For example, (?!a){3} does
+not assert that the next three characters are not "a". It just asserts that the
+next character is not "a" three times.
+
+3. Capturing subpatterns that occur inside negative lookahead assertions are
+counted, but their entries in the offsets vector are never set. Perl sets its
+numerical variables from any such patterns that are matched before the
+assertion fails to match something (thereby succeeding), but only if the
+negative lookahead assertion contains just one branch.
+
+4. Though binary zero characters are supported in the subject string, they are
+not allowed in a pattern string because it is passed as a normal C string,
+terminated by zero. The escape sequence "\\0" can be used in the pattern to
+represent a binary zero.
+
+5. The following Perl escape sequences are not supported: \\l, \\u, \\L, \\U,
+\\E, \\Q. In fact these are implemented by Perl's general string-handling and
+are not part of its pattern matching engine.
+
+6. The Perl \\G assertion is not supported as it is not relevant to single
+pattern matches.
+
+7. Fairly obviously, PCRE does not support the (?{code}) and (?p{code})
+constructions. However, there is some experimental support for recursive
+patterns using the non-Perl item (?R).
+
+8. There are at the time of writing some oddities in Perl 5.005_02 concerned
+with the settings of captured strings when part of a pattern is repeated. For
+example, matching "aba" against the pattern /^(a(b)?)+$/ sets $2 to the value
+"b", but matching "aabbaa" against /^(aa(bb)?)+$/ leaves $2 unset. However, if
+the pattern is changed to /^(aa(b(b))?)+$/ then $2 (and $3) get set.
+
+In Perl 5.004 $2 is set in both cases, and that is also true of PCRE. If in the
+future Perl changes to a consistent state that is different, PCRE may change to
+follow.
+
+9. Another as yet unresolved discrepancy is that in Perl 5.005_02 the pattern
+/^(a)?(?(1)a|b)+$/ matches the string "a", whereas in PCRE it does not.
+However, in both Perl and PCRE /^(a)?a/ matched against "a" leaves $1 unset.
+
+10. PCRE provides some extensions to the Perl regular expression facilities:
+
+(a) Although lookbehind assertions must match fixed length strings, each
+alternative branch of a lookbehind assertion can match a different length of
+string. Perl 5.005 requires them all to have the same length.
+
+(b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is not set, the $ meta-
+character matches only at the very end of the string.
+
+(c) If PCRE_EXTRA is set, a backslash followed by a letter with no special
+meaning is faulted.
+
+(d) If PCRE_UNGREEDY is set, the greediness of the repetition quantifiers is
+inverted, that is, by default they are not greedy, but if followed by a
+question mark they are.
+
+(e) PCRE_ANCHORED can be used to force a pattern to be tried only at the start
+of the subject.
+
+(f) The PCRE_NOTBOL, PCRE_NOTEOL, and PCRE_NOTEMPTY options for
+\fBpcre_exec()\fR have no Perl equivalents.
+
+(g) The (?R) construct allows for recursive pattern matching (Perl 5.6 can do
+this using the (?p{code}) construct, which PCRE cannot of course support.)
+
+
+.SH REGULAR EXPRESSION DETAILS
+The syntax and semantics of the regular expressions supported by PCRE are
+described below. Regular expressions are also described in the Perl
+documentation and in a number of other books, some of which have copious
+examples. Jeffrey Friedl's "Mastering Regular Expressions", published by
+O'Reilly (ISBN 1-56592-257), covers them in great detail. The description
+here is intended as reference documentation.
+
+A regular expression is a pattern that is matched against a subject string from
+left to right. Most characters stand for themselves in a pattern, and match the
+corresponding characters in the subject. As a trivial example, the pattern
+
+  The quick brown fox
+
+matches a portion of a subject string that is identical to itself. The power of
+regular expressions comes from the ability to include alternatives and
+repetitions in the pattern. These are encoded in the pattern by the use of
+\fImeta-characters\fR, which do not stand for themselves but instead are
+interpreted in some special way.
+
+There are two different sets of meta-characters: those that are recognized
+anywhere in the pattern except within square brackets, and those that are
+recognized in square brackets. Outside square brackets, the meta-characters are
+as follows:
+
+  \\      general escape character with several uses
+  ^      assert start of subject (or line, in multiline mode)
+  $      assert end of subject (or line, in multiline mode)
+  .      match any character except newline (by default)
+  [      start character class definition
+  |      start of alternative branch
+  (      start subpattern
+  )      end subpattern
+  ?      extends the meaning of (
+         also 0 or 1 quantifier
+         also quantifier minimizer
+  *      0 or more quantifier
+  +      1 or more quantifier
+  {      start min/max quantifier
+
+Part of a pattern that is in square brackets is called a "character class". In
+a character class the only meta-characters are:
+
+  \\      general escape character
+  ^      negate the class, but only if the first character
+  -      indicates character range
+  ]      terminates the character class
+
+The following sections describe the use of each of the meta-characters.
+
+
+.SH BACKSLASH
+The backslash character has several uses. Firstly, if it is followed by a
+non-alphameric character, it takes away any special meaning that character may
+have. This use of backslash as an escape character applies both inside and
+outside character classes.
+
+For example, if you want to match a "*" character, you write "\\*" in the
+pattern. This applies whether or not the following character would otherwise be
+interpreted as a meta-character, so it is always safe to precede a
+non-alphameric with "\\" to specify that it stands for itself. In particular,
+if you want to match a backslash, you write "\\\\".
+
+If a pattern is compiled with the PCRE_EXTENDED option, whitespace in the
+pattern (other than in a character class) and characters between a "#" outside
+a character class and the next newline character are ignored. An escaping
+backslash can be used to include a whitespace or "#" character as part of the
+pattern.
+
+A second use of backslash provides a way of encoding non-printing characters
+in patterns in a visible manner. There is no restriction on the appearance of
+non-printing characters, apart from the binary zero that terminates a pattern,
+but when a pattern is being prepared by text editing, it is usually easier to
+use one of the following escape sequences than the binary character it
+represents:
+
+  \\a     alarm, that is, the BEL character (hex 07)
+  \\cx    "control-x", where x is any character
+  \\e     escape (hex 1B)
+  \\f     formfeed (hex 0C)
+  \\n     newline (hex 0A)
+  \\r     carriage return (hex 0D)
+  \\t     tab (hex 09)
+  \\xhh   character with hex code hh
+  \\ddd   character with octal code ddd, or backreference
+
+The precise effect of "\\cx" is as follows: if "x" is a lower case letter, it
+is converted to upper case. Then bit 6 of the character (hex 40) is inverted.
+Thus "\\cz" becomes hex 1A, but "\\c{" becomes hex 3B, while "\\c;" becomes hex
+7B.
+
+After "\\x", up to two hexadecimal digits are read (letters can be in upper or
+lower case).
+
+After "\\0" up to two further octal digits are read. In both cases, if there
+are fewer than two digits, just those that are present are used. Thus the
+sequence "\\0\\x\\07" specifies two binary zeros followed by a BEL character.
+Make sure you supply two digits after the initial zero if the character that
+follows is itself an octal digit.
+
+The handling of a backslash followed by a digit other than 0 is complicated.
+Outside a character class, PCRE reads it and any following digits as a decimal
+number. If the number is less than 10, or if there have been at least that many
+previous capturing left parentheses in the expression, the entire sequence is
+taken as a \fIback reference\fR. A description of how this works is given
+later, following the discussion of parenthesized subpatterns.
+
+Inside a character class, or if the decimal number is greater than 9 and there
+have not been that many capturing subpatterns, PCRE re-reads up to three octal
+digits following the backslash, and generates a single byte from the least
+significant 8 bits of the value. Any subsequent digits stand for themselves.
+For example:
+
+  \\040   is another way of writing a space
+  \\40    is the same, provided there are fewer than 40
+            previous capturing subpatterns
+  \\7     is always a back reference
+  \\11    might be a back reference, or another way of
+            writing a tab
+  \\011   is always a tab
+  \\0113  is a tab followed by the character "3"
+  \\113   is the character with octal code 113 (since there
+            can be no more than 99 back references)
+  \\377   is a byte consisting entirely of 1 bits
+  \\81    is either a back reference, or a binary zero
+            followed by the two characters "8" and "1"
+
+Note that octal values of 100 or greater must not be introduced by a leading
+zero, because no more than three octal digits are ever read.
+
+All the sequences that define a single byte value can be used both inside and
+outside character classes. In addition, inside a character class, the sequence
+"\\b" is interpreted as the backspace character (hex 08). Outside a character
+class it has a different meaning (see below).
+
+The third use of backslash is for specifying generic character types:
+
+  \\d     any decimal digit
+  \\D     any character that is not a decimal digit
+  \\s     any whitespace character
+  \\S     any character that is not a whitespace character
+  \\w     any "word" character
+  \\W     any "non-word" character
+
+Each pair of escape sequences partitions the complete set of characters into
+two disjoint sets. Any given character matches one, and only one, of each pair.
+
+A "word" character is any letter or digit or the underscore character, that is,
+any character which can be part of a Perl "word". The definition of letters and
+digits is controlled by PCRE's character tables, and may vary if locale-
+specific matching is taking place (see "Locale support" above). For example, in
+the "fr" (French) locale, some character codes greater than 128 are used for
+accented letters, and these are matched by \\w.
+
+These character type sequences can appear both inside and outside character
+classes. They each match one character of the appropriate type. If the current
+matching point is at the end of the subject string, all of them fail, since
+there is no character to match.
+
+The fourth use of backslash is for certain simple assertions. An assertion
+specifies a condition that has to be met at a particular point in a match,
+without consuming any characters from the subject string. The use of
+subpatterns for more complicated assertions is described below. The backslashed
+assertions are
+
+  \\b     word boundary
+  \\B     not a word boundary
+  \\A     start of subject (independent of multiline mode)
+  \\Z     end of subject or newline at end (independent of multiline mode)
+  \\z     end of subject (independent of multiline mode)
+
+These assertions may not appear in character classes (but note that "\\b" has a
+different meaning, namely the backspace character, inside a character class).
+
+A word boundary is a position in the subject string where the current character
+and the previous character do not both match \\w or \\W (i.e. one matches
+\\w and the other matches \\W), or the start or end of the string if the
+first or last character matches \\w, respectively.
+
+The \\A, \\Z, and \\z assertions differ from the traditional circumflex and
+dollar (described below) in that they only ever match at the very start and end
+of the subject string, whatever options are set. They are not affected by the
+PCRE_NOTBOL or PCRE_NOTEOL options. If the \fIstartoffset\fR argument of
+\fBpcre_exec()\fR is non-zero, \\A can never match. The difference between \\Z
+and \\z is that \\Z matches before a newline that is the last character of the
+string as well as at the end of the string, whereas \\z matches only at the
+end.
+
+
+.SH CIRCUMFLEX AND DOLLAR
+Outside a character class, in the default matching mode, the circumflex
+character is an assertion which is true only if the current matching point is
+at the start of the subject string. If the \fIstartoffset\fR argument of
+\fBpcre_exec()\fR is non-zero, circumflex can never match. Inside a character
+class, circumflex has an entirely different meaning (see below).
+
+Circumflex need not be the first character of the pattern if a number of
+alternatives are involved, but it should be the first thing in each alternative
+in which it appears if the pattern is ever to match that branch. If all
+possible alternatives start with a circumflex, that is, if the pattern is
+constrained to match only at the start of the subject, it is said to be an
+"anchored" pattern. (There are also other constructs that can cause a pattern
+to be anchored.)
+
+A dollar character is an assertion which is true only if the current matching
+point is at the end of the subject string, or immediately before a newline
+character that is the last character in the string (by default). Dollar need
+not be the last character of the pattern if a number of alternatives are
+involved, but it should be the last item in any branch in which it appears.
+Dollar has no special meaning in a character class.
+
+The meaning of dollar can be changed so that it matches only at the very end of
+the string, by setting the PCRE_DOLLAR_ENDONLY option at compile or matching
+time. This does not affect the \\Z assertion.
+
+The meanings of the circumflex and dollar characters are changed if the
+PCRE_MULTILINE option is set. When this is the case, they match immediately
+after and immediately before an internal "\\n" character, respectively, in
+addition to matching at the start and end of the subject string. For example,
+the pattern /^abc$/ matches the subject string "def\\nabc" in multiline mode,
+but not otherwise. Consequently, patterns that are anchored in single line mode
+because all branches start with "^" are not anchored in multiline mode, and a
+match for circumflex is possible when the \fIstartoffset\fR argument of
+\fBpcre_exec()\fR is non-zero. The PCRE_DOLLAR_ENDONLY option is ignored if
+PCRE_MULTILINE is set.
+
+Note that the sequences \\A, \\Z, and \\z can be used to match the start and
+end of the subject in both modes, and if all branches of a pattern start with
+\\A is it always anchored, whether PCRE_MULTILINE is set or not.
+
+
+.SH FULL STOP (PERIOD, DOT)
+Outside a character class, a dot in the pattern matches any one character in
+the subject, including a non-printing character, but not (by default) newline.
+If the PCRE_DOTALL option is set, then dots match newlines as well. The
+handling of dot is entirely independent of the handling of circumflex and
+dollar, the only relationship being that they both involve newline characters.
+Dot has no special meaning in a character class.
+
+
+.SH SQUARE BRACKETS
+An opening square bracket introduces a character class, terminated by a closing
+square bracket. A closing square bracket on its own is not special. If a
+closing square bracket is required as a member of the class, it should be the
+first data character in the class (after an initial circumflex, if present) or
+escaped with a backslash.
+
+A character class matches a single character in the subject; the character must
+be in the set of characters defined by the class, unless the first character in
+the class is a circumflex, in which case the subject character must not be in
+the set defined by the class. If a circumflex is actually required as a member
+of the class, ensure it is not the first character, or escape it with a
+backslash.
+
+For example, the character class [aeiou] matches any lower case vowel, while
+[^aeiou] matches any character that is not a lower case vowel. Note that a
+circumflex is just a convenient notation for specifying the characters which
+are in the class by enumerating those that are not. It is not an assertion: it
+still consumes a character from the subject string, and fails if the current
+pointer is at the end of the string.
+
+When caseless matching is set, any letters in a class represent both their
+upper case and lower case versions, so for example, a caseless [aeiou] matches
+"A" as well as "a", and a caseless [^aeiou] does not match "A", whereas a
+caseful version would.
+
+The newline character is never treated in any special way in character classes,
+whatever the setting of the PCRE_DOTALL or PCRE_MULTILINE options is. A class
+such as [^a] will always match a newline.
+
+The minus (hyphen) character can be used to specify a range of characters in a
+character class. For example, [d-m] matches any letter between d and m,
+inclusive. If a minus character is required in a class, it must be escaped with
+a backslash or appear in a position where it cannot be interpreted as
+indicating a range, typically as the first or last character in the class.
+
+It is not possible to have the literal character "]" as the end character of a
+range. A pattern such as [W-]46] is interpreted as a class of two characters
+("W" and "-") followed by a literal string "46]", so it would match "W46]" or
+"-46]". However, if the "]" is escaped with a backslash it is interpreted as
+the end of range, so [W-\\]46] is interpreted as a single class containing a
+range followed by two separate characters. The octal or hexadecimal
+representation of "]" can also be used to end a range.
+
+Ranges operate in ASCII collating sequence. They can also be used for
+characters specified numerically, for example [\\000-\\037]. If a range that
+includes letters is used when caseless matching is set, it matches the letters
+in either case. For example, [W-c] is equivalent to [][\\^_`wxyzabc], matched
+caselessly, and if character tables for the "fr" locale are in use,
+[\\xc8-\\xcb] matches accented E characters in both cases.
+
+The character types \\d, \\D, \\s, \\S, \\w, and \\W may also appear in a
+character class, and add the characters that they match to the class. For
+example, [\\dABCDEF] matches any hexadecimal digit. A circumflex can
+conveniently be used with the upper case character types to specify a more
+restricted set of characters than the matching lower case type. For example,
+the class [^\\W_] matches any letter or digit, but not underscore.
+
+All non-alphameric characters other than \\, -, ^ (at the start) and the
+terminating ] are non-special in character classes, but it does no harm if they
+are escaped.
+
+
+.SH POSIX CHARACTER CLASSES
+Perl 5.6 (not yet released at the time of writing) is going to support the
+POSIX notation for character classes, which uses names enclosed by [: and :]
+within the enclosing square brackets. PCRE supports this notation. For example,
+
+  [01[:alpha:]%]
+
+matches "0", "1", any alphabetic character, or "%". The supported class names
+are
+
+  alnum    letters and digits
+  alpha    letters
+  ascii    character codes 0 - 127
+  cntrl    control characters
+  digit    decimal digits (same as \\d)
+  graph    printing characters, excluding space
+  lower    lower case letters
+  print    printing characters, including space
+  punct    printing characters, excluding letters and digits
+  space    white space (same as \\s)
+  upper    upper case letters
+  word     "word" characters (same as \\w)
+  xdigit   hexadecimal digits
+
+The names "ascii" and "word" are Perl extensions. Another Perl extension is
+negation, which is indicated by a ^ character after the colon. For example,
+
+  [12[:^digit:]]
+
+matches "1", "2", or any non-digit. PCRE (and Perl) also recogize the POSIX
+syntax [.ch.] and [=ch=] where "ch" is a "collating element", but these are not
+supported, and an error is given if they are encountered.
+
+
+.SH VERTICAL BAR
+Vertical bar characters are used to separate alternative patterns. For example,
+the pattern
+
+  gilbert|sullivan
+
+matches either "gilbert" or "sullivan". Any number of alternatives may appear,
+and an empty alternative is permitted (matching the empty string).
+The matching process tries each alternative in turn, from left to right,
+and the first one that succeeds is used. If the alternatives are within a
+subpattern (defined below), "succeeds" means matching the rest of the main
+pattern as well as the alternative in the subpattern.
+
+
+.SH INTERNAL OPTION SETTING
+The settings of PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and PCRE_EXTENDED
+can be changed from within the pattern by a sequence of Perl option letters
+enclosed between "(?" and ")". The option letters are
+
+  i  for PCRE_CASELESS
+  m  for PCRE_MULTILINE
+  s  for PCRE_DOTALL
+  x  for PCRE_EXTENDED
+
+For example, (?im) sets caseless, multiline matching. It is also possible to
+unset these options by preceding the letter with a hyphen, and a combined
+setting and unsetting such as (?im-sx), which sets PCRE_CASELESS and
+PCRE_MULTILINE while unsetting PCRE_DOTALL and PCRE_EXTENDED, is also
+permitted. If a letter appears both before and after the hyphen, the option is
+unset.
+
+The scope of these option changes depends on where in the pattern the setting
+occurs. For settings that are outside any subpattern (defined below), the
+effect is the same as if the options were set or unset at the start of
+matching. The following patterns all behave in exactly the same way:
+
+  (?i)abc
+  a(?i)bc
+  ab(?i)c
+  abc(?i)
+
+which in turn is the same as compiling the pattern abc with PCRE_CASELESS set.
+In other words, such "top level" settings apply to the whole pattern (unless
+there are other changes inside subpatterns). If there is more than one setting
+of the same option at top level, the rightmost setting is used.
+
+If an option change occurs inside a subpattern, the effect is different. This
+is a change of behaviour in Perl 5.005. An option change inside a subpattern
+affects only that part of the subpattern that follows it, so
+
+  (a(?i)b)c
+
+matches abc and aBc and no other strings (assuming PCRE_CASELESS is not used).
+By this means, options can be made to have different settings in different
+parts of the pattern. Any changes made in one alternative do carry on
+into subsequent branches within the same subpattern. For example,
+
+  (a(?i)b|c)
+
+matches "ab", "aB", "c", and "C", even though when matching "C" the first
+branch is abandoned before the option setting. This is because the effects of
+option settings happen at compile time. There would be some very weird
+behaviour otherwise.
+
+The PCRE-specific options PCRE_UNGREEDY and PCRE_EXTRA can be changed in the
+same way as the Perl-compatible options by using the characters U and X
+respectively. The (?X) flag setting is special in that it must always occur
+earlier in the pattern than any of the additional features it turns on, even
+when it is at top level. It is best put at the start.
+
+
+.SH SUBPATTERNS
+Subpatterns are delimited by parentheses (round brackets), which can be nested.
+Marking part of a pattern as a subpattern does two things:
+
+1. It localizes a set of alternatives. For example, the pattern
+
+  cat(aract|erpillar|)
+
+matches one of the words "cat", "cataract", or "caterpillar". Without the
+parentheses, it would match "cataract", "erpillar" or the empty string.
+
+2. It sets up the subpattern as a capturing subpattern (as defined above).
+When the whole pattern matches, that portion of the subject string that matched
+the subpattern is passed back to the caller via the \fIovector\fR argument of
+\fBpcre_exec()\fR. Opening parentheses are counted from left to right (starting
+from 1) to obtain the numbers of the capturing subpatterns.
+
+For example, if the string "the red king" is matched against the pattern
+
+  the ((red|white) (king|queen))
+
+the captured substrings are "red king", "red", and "king", and are numbered 1,
+2, and 3.
+
+The fact that plain parentheses fulfil two functions is not always helpful.
+There are often times when a grouping subpattern is required without a
+capturing requirement. If an opening parenthesis is followed by "?:", the
+subpattern does not do any capturing, and is not counted when computing the
+number of any subsequent capturing subpatterns. For example, if the string "the
+white queen" is matched against the pattern
+
+  the ((?:red|white) (king|queen))
+
+the captured substrings are "white queen" and "queen", and are numbered 1 and
+2. The maximum number of captured substrings is 99, and the maximum number of
+all subpatterns, both capturing and non-capturing, is 200.
+
+As a convenient shorthand, if any option settings are required at the start of
+a non-capturing subpattern, the option letters may appear between the "?" and
+the ":". Thus the two patterns
+
+  (?i:saturday|sunday)
+  (?:(?i)saturday|sunday)
+
+match exactly the same set of strings. Because alternative branches are tried
+from left to right, and options are not reset until the end of the subpattern
+is reached, an option setting in one branch does affect subsequent branches, so
+the above patterns match "SUNDAY" as well as "Saturday".
+
+
+.SH REPETITION
+Repetition is specified by quantifiers, which can follow any of the following
+items:
+
+  a single character, possibly escaped
+  the . metacharacter
+  a character class
+  a back reference (see next section)
+  a parenthesized subpattern (unless it is an assertion - see below)
+
+The general repetition quantifier specifies a minimum and maximum number of
+permitted matches, by giving the two numbers in curly brackets (braces),
+separated by a comma. The numbers must be less than 65536, and the first must
+be less than or equal to the second. For example:
+
+  z{2,4}
+
+matches "zz", "zzz", or "zzzz". A closing brace on its own is not a special
+character. If the second number is omitted, but the comma is present, there is
+no upper limit; if the second number and the comma are both omitted, the
+quantifier specifies an exact number of required matches. Thus
+
+  [aeiou]{3,}
+
+matches at least 3 successive vowels, but may match many more, while
+
+  \\d{8}
+
+matches exactly 8 digits. An opening curly bracket that appears in a position
+where a quantifier is not allowed, or one that does not match the syntax of a
+quantifier, is taken as a literal character. For example, {,6} is not a
+quantifier, but a literal string of four characters.
+
+The quantifier {0} is permitted, causing the expression to behave as if the
+previous item and the quantifier were not present.
+
+For convenience (and historical compatibility) the three most common
+quantifiers have single-character abbreviations:
+
+  *    is equivalent to {0,}
+  +    is equivalent to {1,}
+  ?    is equivalent to {0,1}
+
+It is possible to construct infinite loops by following a subpattern that can
+match no characters with a quantifier that has no upper limit, for example:
+
+  (a?)*
+
+Earlier versions of Perl and PCRE used to give an error at compile time for
+such patterns. However, because there are cases where this can be useful, such
+patterns are now accepted, but if any repetition of the subpattern does in fact
+match no characters, the loop is forcibly broken.
+
+By default, the quantifiers are "greedy", that is, they match as much as
+possible (up to the maximum number of permitted times), without causing the
+rest of the pattern to fail. The classic example of where this gives problems
+is in trying to match comments in C programs. These appear between the
+sequences /* and */ and within the sequence, individual * and / characters may
+appear. An attempt to match C comments by applying the pattern
+
+  /\\*.*\\*/
+
+to the string
+
+  /* first command */  not comment  /* second comment */
+
+fails, because it matches the entire string due to the greediness of the .*
+item.
+
+However, if a quantifier is followed by a question mark, then it ceases to be
+greedy, and instead matches the minimum number of times possible, so the
+pattern
+
+  /\\*.*?\\*/
+
+does the right thing with the C comments. The meaning of the various
+quantifiers is not otherwise changed, just the preferred number of matches.
+Do not confuse this use of question mark with its use as a quantifier in its
+own right. Because it has two uses, it can sometimes appear doubled, as in
+
+  \\d??\\d
+
+which matches one digit by preference, but can match two if that is the only
+way the rest of the pattern matches.
+
+If the PCRE_UNGREEDY option is set (an option which is not available in Perl)
+then the quantifiers are not greedy by default, but individual ones can be made
+greedy by following them with a question mark. In other words, it inverts the
+default behaviour.
+
+When a parenthesized subpattern is quantified with a minimum repeat count that
+is greater than 1 or with a limited maximum, more store is required for the
+compiled pattern, in proportion to the size of the minimum or maximum.
+
+If a pattern starts with .* or .{0,} and the PCRE_DOTALL option (equivalent
+to Perl's /s) is set, thus allowing the . to match newlines, then the pattern
+is implicitly anchored, because whatever follows will be tried against every
+character position in the subject string, so there is no point in retrying the
+overall match at any position after the first. PCRE treats such a pattern as
+though it were preceded by \\A. In cases where it is known that the subject
+string contains no newlines, it is worth setting PCRE_DOTALL when the pattern
+begins with .* in order to obtain this optimization, or alternatively using ^
+to indicate anchoring explicitly.
+
+When a capturing subpattern is repeated, the value captured is the substring
+that matched the final iteration. For example, after
+
+  (tweedle[dume]{3}\\s*)+
+
+has matched "tweedledum tweedledee" the value of the captured substring is
+"tweedledee". However, if there are nested capturing subpatterns, the
+corresponding captured values may have been set in previous iterations. For
+example, after
+
+  /(a|(b))+/
+
+matches "aba" the value of the second captured substring is "b".
+
+
+.SH BACK REFERENCES
+Outside a character class, a backslash followed by a digit greater than 0 (and
+possibly further digits) is a back reference to a capturing subpattern earlier
+(i.e. to its left) in the pattern, provided there have been that many previous
+capturing left parentheses.
+
+However, if the decimal number following the backslash is less than 10, it is
+always taken as a back reference, and causes an error only if there are not
+that many capturing left parentheses in the entire pattern. In other words, the
+parentheses that are referenced need not be to the left of the reference for
+numbers less than 10. See the section entitled "Backslash" above for further
+details of the handling of digits following a backslash.
+
+A back reference matches whatever actually matched the capturing subpattern in
+the current subject string, rather than anything matching the subpattern
+itself. So the pattern
+
+  (sens|respons)e and \\1ibility
+
+matches "sense and sensibility" and "response and responsibility", but not
+"sense and responsibility". If caseful matching is in force at the time of the
+back reference, then the case of letters is relevant. For example,
+
+  ((?i)rah)\\s+\\1
+
+matches "rah rah" and "RAH RAH", but not "RAH rah", even though the original
+capturing subpattern is matched caselessly.
+
+There may be more than one back reference to the same subpattern. If a
+subpattern has not actually been used in a particular match, then any back
+references to it always fail. For example, the pattern
+
+  (a|(bc))\\2
+
+always fails if it starts to match "a" rather than "bc". Because there may be
+up to 99 back references, all digits following the backslash are taken
+as part of a potential back reference number. If the pattern continues with a
+digit character, then some delimiter must be used to terminate the back
+reference. If the PCRE_EXTENDED option is set, this can be whitespace.
+Otherwise an empty comment can be used.
+
+A back reference that occurs inside the parentheses to which it refers fails
+when the subpattern is first used, so, for example, (a\\1) never matches.
+However, such references can be useful inside repeated subpatterns. For
+example, the pattern
+
+  (a|b\\1)+
+
+matches any number of "a"s and also "aba", "ababaa" etc. At each iteration of
+the subpattern, the back reference matches the character string corresponding
+to the previous iteration. In order for this to work, the pattern must be such
+that the first iteration does not need to match the back reference. This can be
+done using alternation, as in the example above, or by a quantifier with a
+minimum of zero.
+
+
+.SH ASSERTIONS
+An assertion is a test on the characters following or preceding the current
+matching point that does not actually consume any characters. The simple
+assertions coded as \\b, \\B, \\A, \\Z, \\z, ^ and $ are described above. More
+complicated assertions are coded as subpatterns. There are two kinds: those
+that look ahead of the current position in the subject string, and those that
+look behind it.
+
+An assertion subpattern is matched in the normal way, except that it does not
+cause the current matching position to be changed. Lookahead assertions start
+with (?= for positive assertions and (?! for negative assertions. For example,
+
+  \\w+(?=;)
+
+matches a word followed by a semicolon, but does not include the semicolon in
+the match, and
+
+  foo(?!bar)
+
+matches any occurrence of "foo" that is not followed by "bar". Note that the
+apparently similar pattern
+
+  (?!foo)bar
+
+does not find an occurrence of "bar" that is preceded by something other than
+"foo"; it finds any occurrence of "bar" whatsoever, because the assertion
+(?!foo) is always true when the next three characters are "bar". A
+lookbehind assertion is needed to achieve this effect.
+
+Lookbehind assertions start with (?<= for positive assertions and (?<! for
+negative assertions. For example,
+
+  (?<!foo)bar
+
+does find an occurrence of "bar" that is not preceded by "foo". The contents of
+a lookbehind assertion are restricted such that all the strings it matches must
+have a fixed length. However, if there are several alternatives, they do not
+all have to have the same fixed length. Thus
+
+  (?<=bullock|donkey)
+
+is permitted, but
+
+  (?<!dogs?|cats?)
+
+causes an error at compile time. Branches that match different length strings
+are permitted only at the top level of a lookbehind assertion. This is an
+extension compared with Perl 5.005, which requires all branches to match the
+same length of string. An assertion such as
+
+  (?<=ab(c|de))
+
+is not permitted, because its single top-level branch can match two different
+lengths, but it is acceptable if rewritten to use two top-level branches:
+
+  (?<=abc|abde)
+
+The implementation of lookbehind assertions is, for each alternative, to
+temporarily move the current position back by the fixed width and then try to
+match. If there are insufficient characters before the current position, the
+match is deemed to fail. Lookbehinds in conjunction with once-only subpatterns
+can be particularly useful for matching at the ends of strings; an example is
+given at the end of the section on once-only subpatterns.
+
+Several assertions (of any sort) may occur in succession. For example,
+
+  (?<=\\d{3})(?<!999)foo
+
+matches "foo" preceded by three digits that are not "999". Notice that each of
+the assertions is applied independently at the same point in the subject
+string. First there is a check that the previous three characters are all
+digits, then there is a check that the same three characters are not "999".
+This pattern does \fInot\fR match "foo" preceded by six characters, the first
+of which are digits and the last three of which are not "999". For example, it
+doesn't match "123abcfoo". A pattern to do that is
+
+  (?<=\\d{3}...)(?<!999)foo
+
+This time the first assertion looks at the preceding six characters, checking
+that the first three are digits, and then the second assertion checks that the
+preceding three characters are not "999".
+
+Assertions can be nested in any combination. For example,
+
+  (?<=(?<!foo)bar)baz
+
+matches an occurrence of "baz" that is preceded by "bar" which in turn is not
+preceded by "foo", while
+
+  (?<=\\d{3}(?!999)...)foo
+
+is another pattern which matches "foo" preceded by three digits and any three
+characters that are not "999".
+
+Assertion subpatterns are not capturing subpatterns, and may not be repeated,
+because it makes no sense to assert the same thing several times. If any kind
+of assertion contains capturing subpatterns within it, these are counted for
+the purposes of numbering the capturing subpatterns in the whole pattern.
+However, substring capturing is carried out only for positive assertions,
+because it does not make sense for negative assertions.
+
+Assertions count towards the maximum of 200 parenthesized subpatterns.
+
+
+.SH ONCE-ONLY SUBPATTERNS
+With both maximizing and minimizing repetition, failure of what follows
+normally causes the repeated item to be re-evaluated to see if a different
+number of repeats allows the rest of the pattern to match. Sometimes it is
+useful to prevent this, either to change the nature of the match, or to cause
+it fail earlier than it otherwise might, when the author of the pattern knows
+there is no point in carrying on.
+
+Consider, for example, the pattern \\d+foo when applied to the subject line
+
+  123456bar
+
+After matching all 6 digits and then failing to match "foo", the normal
+action of the matcher is to try again with only 5 digits matching the \\d+
+item, and then with 4, and so on, before ultimately failing. Once-only
+subpatterns provide the means for specifying that once a portion of the pattern
+has matched, it is not to be re-evaluated in this way, so the matcher would
+give up immediately on failing to match "foo" the first time. The notation is
+another kind of special parenthesis, starting with (?> as in this example:
+
+  (?>\\d+)bar
+
+This kind of parenthesis "locks up" the  part of the pattern it contains once
+it has matched, and a failure further into the pattern is prevented from
+backtracking into it. Backtracking past it to previous items, however, works as
+normal.
+
+An alternative description is that a subpattern of this type matches the string
+of characters that an identical standalone pattern would match, if anchored at
+the current point in the subject string.
+
+Once-only subpatterns are not capturing subpatterns. Simple cases such as the
+above example can be thought of as a maximizing repeat that must swallow
+everything it can. So, while both \\d+ and \\d+? are prepared to adjust the
+number of digits they match in order to make the rest of the pattern match,
+(?>\\d+) can only match an entire sequence of digits.
+
+This construction can of course contain arbitrarily complicated subpatterns,
+and it can be nested.
+
+Once-only subpatterns can be used in conjunction with lookbehind assertions to
+specify efficient matching at the end of the subject string. Consider a simple
+pattern such as
+
+  abcd$
+
+when applied to a long string which does not match. Because matching proceeds
+from left to right, PCRE will look for each "a" in the subject and then see if
+what follows matches the rest of the pattern. If the pattern is specified as
+
+  ^.*abcd$
+
+then the initial .* matches the entire string at first, but when this fails
+(because there is no following "a"), it backtracks to match all but the last
+character, then all but the last two characters, and so on. Once again the
+search for "a" covers the entire string, from right to left, so we are no
+better off. However, if the pattern is written as
+
+  ^(?>.*)(?<=abcd)
+
+then there can be no backtracking for the .* item; it can match only the entire
+string. The subsequent lookbehind assertion does a single test on the last four
+characters. If it fails, the match fails immediately. For long strings, this
+approach makes a significant difference to the processing time.
+
+When a pattern contains an unlimited repeat inside a subpattern that can itself
+be repeated an unlimited number of times, the use of a once-only subpattern is
+the only way to avoid some failing matches taking a very long time indeed.
+The pattern
+
+  (\\D+|<\\d+>)*[!?]
+
+matches an unlimited number of substrings that either consist of non-digits, or
+digits enclosed in <>, followed by either ! or ?. When it matches, it runs
+quickly. However, if it is applied to
+
+  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
+
+it takes a long time before reporting failure. This is because the string can
+be divided between the two repeats in a large number of ways, and all have to
+be tried. (The example used [!?] rather than a single character at the end,
+because both PCRE and Perl have an optimization that allows for fast failure
+when a single character is used. They remember the last single character that
+is required for a match, and fail early if it is not present in the string.)
+If the pattern is changed to
+
+  ((?>\\D+)|<\\d+>)*[!?]
+
+sequences of non-digits cannot be broken, and failure happens quickly.
+
+
+.SH CONDITIONAL SUBPATTERNS
+It is possible to cause the matching process to obey a subpattern
+conditionally or to choose between two alternative subpatterns, depending on
+the result of an assertion, or whether a previous capturing subpattern matched
+or not. The two possible forms of conditional subpattern are
+
+  (?(condition)yes-pattern)
+  (?(condition)yes-pattern|no-pattern)
+
+If the condition is satisfied, the yes-pattern is used; otherwise the
+no-pattern (if present) is used. If there are more than two alternatives in the
+subpattern, a compile-time error occurs.
+
+There are two kinds of condition. If the text between the parentheses consists
+of a sequence of digits, then the condition is satisfied if the capturing
+subpattern of that number has previously matched. Consider the following
+pattern, which contains non-significant white space to make it more readable
+(assume the PCRE_EXTENDED option) and to divide it into three parts for ease
+of discussion:
+
+  ( \\( )?    [^()]+    (?(1) \\) )
+
+The first part matches an optional opening parenthesis, and if that
+character is present, sets it as the first captured substring. The second part
+matches one or more characters that are not parentheses. The third part is a
+conditional subpattern that tests whether the first set of parentheses matched
+or not. If they did, that is, if subject started with an opening parenthesis,
+the condition is true, and so the yes-pattern is executed and a closing
+parenthesis is required. Otherwise, since no-pattern is not present, the
+subpattern matches nothing. In other words, this pattern matches a sequence of
+non-parentheses, optionally enclosed in parentheses.
+
+If the condition is not a sequence of digits, it must be an assertion. This may
+be a positive or negative lookahead or lookbehind assertion. Consider this
+pattern, again containing non-significant white space, and with the two
+alternatives on the second line:
+
+  (?(?=[^a-z]*[a-z])
+  \\d{2}-[a-z]{3}-\\d{2}  |  \\d{2}-\\d{2}-\\d{2} )
+
+The condition is a positive lookahead assertion that matches an optional
+sequence of non-letters followed by a letter. In other words, it tests for the
+presence of at least one letter in the subject. If a letter is found, the
+subject is matched against the first alternative; otherwise it is matched
+against the second. This pattern matches strings in one of the two forms
+dd-aaa-dd or dd-dd-dd, where aaa are letters and dd are digits.
+
+
+.SH COMMENTS
+The sequence (?# marks the start of a comment which continues up to the next
+closing parenthesis. Nested parentheses are not permitted. The characters
+that make up a comment play no part in the pattern matching at all.
+
+If the PCRE_EXTENDED option is set, an unescaped # character outside a
+character class introduces a comment that continues up to the next newline
+character in the pattern.
+
+
+.SH RECURSIVE PATTERNS
+Consider the problem of matching a string in parentheses, allowing for
+unlimited nested parentheses. Without the use of recursion, the best that can
+be done is to use a pattern that matches up to some fixed depth of nesting. It
+is not possible to handle an arbitrary nesting depth. Perl 5.6 has provided an
+experimental facility that allows regular expressions to recurse (amongst other
+things). It does this by interpolating Perl code in the expression at run time,
+and the code can refer to the expression itself. A Perl pattern to solve the
+parentheses problem can be created like this:
+
+  $re = qr{\\( (?: (?>[^()]+) | (?p{$re}) )* \\)}x;
+
+The (?p{...}) item interpolates Perl code at run time, and in this case refers
+recursively to the pattern in which it appears. Obviously, PCRE cannot support
+the interpolation of Perl code. Instead, the special item (?R) is provided for
+the specific case of recursion. This PCRE pattern solves the parentheses
+problem (assume the PCRE_EXTENDED option is set so that white space is
+ignored):
+
+  \\( ( (?>[^()]+) | (?R) )* \\)
+
+First it matches an opening parenthesis. Then it matches any number of
+substrings which can either be a sequence of non-parentheses, or a recursive
+match of the pattern itself (i.e. a correctly parenthesized substring). Finally
+there is a closing parenthesis.
+
+This particular example pattern contains nested unlimited repeats, and so the
+use of a once-only subpattern for matching strings of non-parentheses is
+important when applying the pattern to strings that do not match. For example,
+when it is applied to
+
+  (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()
+
+it yields "no match" quickly. However, if a once-only subpattern is not used,
+the match runs for a very long time indeed because there are so many different
+ways the + and * repeats can carve up the subject, and all have to be tested
+before failure can be reported.
+
+The values set for any capturing subpatterns are those from the outermost level
+of the recursion at which the subpattern value is set. If the pattern above is
+matched against
+
+  (ab(cd)ef)
+
+the value for the capturing parentheses is "ef", which is the last value taken
+on at the top level. If additional parentheses are added, giving
+
+  \\( ( ( (?>[^()]+) | (?R) )* ) \\)
+     ^                        ^
+     ^                        ^
+then the string they capture is "ab(cd)ef", the contents of the top level
+parentheses. If there are more than 15 capturing parentheses in a pattern, PCRE
+has to obtain extra memory to store data during a recursion, which it does by
+using \fBpcre_malloc\fR, freeing it via \fBpcre_free\fR afterwards. If no
+memory can be obtained, it saves data for the first 15 capturing parentheses
+only, as there is no way to give an out-of-memory error from within a
+recursion.
+
+
+.SH PERFORMANCE
+Certain items that may appear in patterns are more efficient than others. It is
+more efficient to use a character class like [aeiou] than a set of alternatives
+such as (a|e|i|o|u). In general, the simplest construction that provides the
+required behaviour is usually the most efficient. Jeffrey Friedl's book
+contains a lot of discussion about optimizing regular expressions for efficient
+performance.
+
+When a pattern begins with .* and the PCRE_DOTALL option is set, the pattern is
+implicitly anchored by PCRE, since it can match only at the start of a subject
+string. However, if PCRE_DOTALL is not set, PCRE cannot make this optimization,
+because the . metacharacter does not then match a newline, and if the subject
+string contains newlines, the pattern may match from the character immediately
+following one of them instead of from the very start. For example, the pattern
+
+  (.*) second
+
+matches the subject "first\\nand second" (where \\n stands for a newline
+character) with the first captured substring being "and". In order to do this,
+PCRE has to retry the match starting after every newline in the subject.
+
+If you are using such a pattern with subject strings that do not contain
+newlines, the best performance is obtained by setting PCRE_DOTALL, or starting
+the pattern with ^.* to indicate explicit anchoring. That saves PCRE from
+having to scan along the subject looking for a newline to restart at.
+
+Beware of patterns that contain nested indefinite repeats. These can take a
+long time to run when applied to a string that does not match. Consider the
+pattern fragment
+
+  (a+)*
+
+This can match "aaaa" in 33 different ways, and this number increases very
+rapidly as the string gets longer. (The * repeat can match 0, 1, 2, 3, or 4
+times, and for each of those cases other than 0, the + repeats can match
+different numbers of times.) When the remainder of the pattern is such that the
+entire match is going to fail, PCRE has in principle to try every possible
+variation, and this can take an extremely long time.
+
+An optimization catches some of the more simple cases such as
+
+  (a+)*b
+
+where a literal character follows. Before embarking on the standard matching
+procedure, PCRE checks that there is a "b" later in the subject string, and if
+there is not, it fails the match immediately. However, when there is no
+following literal this optimization cannot be used. You can see the difference
+by comparing the behaviour of
+
+  (a+)*\\d
+
+with the pattern above. The former gives a failure almost instantly when
+applied to a whole line of "a" characters, whereas the latter takes an
+appreciable time with strings longer than about 20 characters.
+
+.SH AUTHOR
+Philip Hazel <ph10@cam.ac.uk>
+.br
+University Computing Service,
+.br
+New Museums Site,
+.br
+Cambridge CB2 3QG, England.
+.br
+Phone: +44 1223 334714
+
+Last updated: 27 January 2000
+.br
+Copyright (c) 1997-2000 University of Cambridge.
diff --git a/srclib/pcre/doc/pcre.html b/srclib/pcre/doc/pcre.html
new file mode 100644
index 0000000000..2ce289007d
--- /dev/null
+++ b/srclib/pcre/doc/pcre.html
@@ -0,0 +1,2259 @@
+<HTML>
+<HEAD>
+<TITLE>pcre specification</TITLE>
+</HEAD>
+<body bgcolor="#FFFFFF" text="#00005A">
+<H1>pcre specification</H1>
+This HTML document has been generated automatically from the original man page.
+If there is any nonsense in it, please consult the man page in case the
+conversion went wrong.
+<UL>
+<LI><A NAME="TOC1" HREF="#SEC1">NAME</A>
+<LI><A NAME="TOC2" HREF="#SEC2">SYNOPSIS</A>
+<LI><A NAME="TOC3" HREF="#SEC3">DESCRIPTION</A>
+<LI><A NAME="TOC4" HREF="#SEC4">MULTI-THREADING</A>
+<LI><A NAME="TOC5" HREF="#SEC5">COMPILING A PATTERN</A>
+<LI><A NAME="TOC6" HREF="#SEC6">STUDYING A PATTERN</A>
+<LI><A NAME="TOC7" HREF="#SEC7">LOCALE SUPPORT</A>
+<LI><A NAME="TOC8" HREF="#SEC8">INFORMATION ABOUT A PATTERN</A>
+<LI><A NAME="TOC9" HREF="#SEC9">MATCHING A PATTERN</A>
+<LI><A NAME="TOC10" HREF="#SEC10">EXTRACTING CAPTURED SUBSTRINGS</A>
+<LI><A NAME="TOC11" HREF="#SEC11">LIMITATIONS</A>
+<LI><A NAME="TOC12" HREF="#SEC12">DIFFERENCES FROM PERL</A>
+<LI><A NAME="TOC13" HREF="#SEC13">REGULAR EXPRESSION DETAILS</A>
+<LI><A NAME="TOC14" HREF="#SEC14">BACKSLASH</A>
+<LI><A NAME="TOC15" HREF="#SEC15">CIRCUMFLEX AND DOLLAR</A>
+<LI><A NAME="TOC16" HREF="#SEC16">FULL STOP (PERIOD, DOT)</A>
+<LI><A NAME="TOC17" HREF="#SEC17">SQUARE BRACKETS</A>
+<LI><A NAME="TOC18" HREF="#SEC18">POSIX CHARACTER CLASSES</A>
+<LI><A NAME="TOC19" HREF="#SEC19">VERTICAL BAR</A>
+<LI><A NAME="TOC20" HREF="#SEC20">INTERNAL OPTION SETTING</A>
+<LI><A NAME="TOC21" HREF="#SEC21">SUBPATTERNS</A>
+<LI><A NAME="TOC22" HREF="#SEC22">REPETITION</A>
+<LI><A NAME="TOC23" HREF="#SEC23">BACK REFERENCES</A>
+<LI><A NAME="TOC24" HREF="#SEC24">ASSERTIONS</A>
+<LI><A NAME="TOC25" HREF="#SEC25">ONCE-ONLY SUBPATTERNS</A>
+<LI><A NAME="TOC26" HREF="#SEC26">CONDITIONAL SUBPATTERNS</A>
+<LI><A NAME="TOC27" HREF="#SEC27">COMMENTS</A>
+<LI><A NAME="TOC28" HREF="#SEC28">RECURSIVE PATTERNS</A>
+<LI><A NAME="TOC29" HREF="#SEC29">PERFORMANCE</A>
+<LI><A NAME="TOC30" HREF="#SEC30">AUTHOR</A>
+</UL>
+<LI><A NAME="SEC1" HREF="#TOC1">NAME</A>
+<P>
+pcre - Perl-compatible regular expressions.
+</P>
+<LI><A NAME="SEC2" HREF="#TOC1">SYNOPSIS</A>
+<P>
+<B>#include &#60;pcre.h&#62;</B>
+</P>
+<P>
+<B>pcre *pcre_compile(const char *<I>pattern</I>, int <I>options</I>,</B>
+<B>const char **<I>errptr</I>, int *<I>erroffset</I>,</B>
+<B>const unsigned char *<I>tableptr</I>);</B>
+</P>
+<P>
+<B>pcre_extra *pcre_study(const pcre *<I>code</I>, int <I>options</I>,</B>
+<B>const char **<I>errptr</I>);</B>
+</P>
+<P>
+<B>int pcre_exec(const pcre *<I>code</I>, const pcre_extra *<I>extra</I>,</B>
+<B>const char *<I>subject</I>, int <I>length</I>, int <I>startoffset</I>,</B>
+<B>int <I>options</I>, int *<I>ovector</I>, int <I>ovecsize</I>);</B>
+</P>
+<P>
+<B>int pcre_copy_substring(const char *<I>subject</I>, int *<I>ovector</I>,</B>
+<B>int <I>stringcount</I>, int <I>stringnumber</I>, char *<I>buffer</I>,</B>
+<B>int <I>buffersize</I>);</B>
+</P>
+<P>
+<B>int pcre_get_substring(const char *<I>subject</I>, int *<I>ovector</I>,</B>
+<B>int <I>stringcount</I>, int <I>stringnumber</I>,</B>
+<B>const char **<I>stringptr</I>);</B>
+</P>
+<P>
+<B>int pcre_get_substring_list(const char *<I>subject</I>,</B>
+<B>int *<I>ovector</I>, int <I>stringcount</I>, const char ***<I>listptr</I>);</B>
+</P>
+<P>
+<B>const unsigned char *pcre_maketables(void);</B>
+</P>
+<P>
+<B>int pcre_fullinfo(const pcre *<I>code</I>, const pcre_extra *<I>extra</I>,</B>
+<B>int <I>what</I>, void *<I>where</I>);</B>
+</P>
+<P>
+<B>int pcre_info(const pcre *<I>code</I>, int *<I>optptr</I>, int</B>
+<B>*<I>firstcharptr</I>);</B>
+</P>
+<P>
+<B>char *pcre_version(void);</B>
+</P>
+<P>
+<B>void *(*pcre_malloc)(size_t);</B>
+</P>
+<P>
+<B>void (*pcre_free)(void *);</B>
+</P>
+<LI><A NAME="SEC3" HREF="#TOC1">DESCRIPTION</A>
+<P>
+The PCRE library is a set of functions that implement regular expression
+pattern matching using the same syntax and semantics as Perl 5, with just a few
+differences (see below). The current implementation corresponds to Perl 5.005,
+with some additional features from the Perl development release.
+</P>
+<P>
+PCRE has its own native API, which is described in this document. There is also
+a set of wrapper functions that correspond to the POSIX regular expression API.
+These are described in the <B>pcreposix</B> documentation.
+</P>
+<P>
+The native API function prototypes are defined in the header file <B>pcre.h</B>,
+and on Unix systems the library itself is called <B>libpcre.a</B>, so can be
+accessed by adding <B>-lpcre</B> to the command for linking an application which
+calls it. The header file defines the macros PCRE_MAJOR and PCRE_MINOR to
+contain the major and minor release numbers for the library. Applications can
+use these to include support for different releases.
+</P>
+<P>
+The functions <B>pcre_compile()</B>, <B>pcre_study()</B>, and <B>pcre_exec()</B>
+are used for compiling and matching regular expressions, while
+<B>pcre_copy_substring()</B>, <B>pcre_get_substring()</B>, and
+<B>pcre_get_substring_list()</B> are convenience functions for extracting
+captured substrings from a matched subject string. The function
+<B>pcre_maketables()</B> is used (optionally) to build a set of character tables
+in the current locale for passing to <B>pcre_compile()</B>.
+</P>
+<P>
+The function <B>pcre_fullinfo()</B> is used to find out information about a
+compiled pattern; <B>pcre_info()</B> is an obsolete version which returns only
+some of the available information, but is retained for backwards compatibility.
+The function <B>pcre_version()</B> returns a pointer to a string containing the
+version of PCRE and its date of release.
+</P>
+<P>
+The global variables <B>pcre_malloc</B> and <B>pcre_free</B> initially contain
+the entry points of the standard <B>malloc()</B> and <B>free()</B> functions
+respectively. PCRE calls the memory management functions via these variables,
+so a calling program can replace them if it wishes to intercept the calls. This
+should be done before calling any PCRE functions.
+</P>
+<LI><A NAME="SEC4" HREF="#TOC1">MULTI-THREADING</A>
+<P>
+The PCRE functions can be used in multi-threading applications, with the
+proviso that the memory management functions pointed to by <B>pcre_malloc</B>
+and <B>pcre_free</B> are shared by all threads.
+</P>
+<P>
+The compiled form of a regular expression is not altered during matching, so
+the same compiled pattern can safely be used by several threads at once.
+</P>
+<LI><A NAME="SEC5" HREF="#TOC1">COMPILING A PATTERN</A>
+<P>
+The function <B>pcre_compile()</B> is called to compile a pattern into an
+internal form. The pattern is a C string terminated by a binary zero, and
+is passed in the argument <I>pattern</I>. A pointer to a single block of memory
+that is obtained via <B>pcre_malloc</B> is returned. This contains the
+compiled code and related data. The <B>pcre</B> type is defined for this for
+convenience, but in fact <B>pcre</B> is just a typedef for <B>void</B>, since the
+contents of the block are not externally defined. It is up to the caller to
+free the memory when it is no longer required.
+</P>
+<P>
+The size of a compiled pattern is roughly proportional to the length of the
+pattern string, except that each character class (other than those containing
+just a single character, negated or not) requires 33 bytes, and repeat
+quantifiers with a minimum greater than one or a bounded maximum cause the
+relevant portions of the compiled pattern to be replicated.
+</P>
+<P>
+The <I>options</I> argument contains independent bits that affect the
+compilation. It should be zero if no options are required. Some of the options,
+in particular, those that are compatible with Perl, can also be set and unset
+from within the pattern (see the detailed description of regular expressions
+below). For these options, the contents of the <I>options</I> argument specifies
+their initial settings at the start of compilation and execution. The
+PCRE_ANCHORED option can be set at the time of matching as well as at compile
+time.
+</P>
+<P>
+If <I>errptr</I> is NULL, <B>pcre_compile()</B> returns NULL immediately.
+Otherwise, if compilation of a pattern fails, <B>pcre_compile()</B> returns
+NULL, and sets the variable pointed to by <I>errptr</I> to point to a textual
+error message. The offset from the start of the pattern to the character where
+the error was discovered is placed in the variable pointed to by
+<I>erroffset</I>, which must not be NULL. If it is, an immediate error is given.
+</P>
+<P>
+If the final argument, <I>tableptr</I>, is NULL, PCRE uses a default set of
+character tables which are built when it is compiled, using the default C
+locale. Otherwise, <I>tableptr</I> must be the result of a call to
+<B>pcre_maketables()</B>. See the section on locale support below.
+</P>
+<P>
+The following option bits are defined in the header file:
+</P>
+<P>
+<PRE>
+  PCRE_ANCHORED
+</PRE>
+</P>
+<P>
+If this bit is set, the pattern is forced to be "anchored", that is, it is
+constrained to match only at the start of the string which is being searched
+(the "subject string"). This effect can also be achieved by appropriate
+constructs in the pattern itself, which is the only way to do it in Perl.
+</P>
+<P>
+<PRE>
+  PCRE_CASELESS
+</PRE>
+</P>
+<P>
+If this bit is set, letters in the pattern match both upper and lower case
+letters. It is equivalent to Perl's /i option.
+</P>
+<P>
+<PRE>
+  PCRE_DOLLAR_ENDONLY
+</PRE>
+</P>
+<P>
+If this bit is set, a dollar metacharacter in the pattern matches only at the
+end of the subject string. Without this option, a dollar also matches
+immediately before the final character if it is a newline (but not before any
+other newlines). The PCRE_DOLLAR_ENDONLY option is ignored if PCRE_MULTILINE is
+set. There is no equivalent to this option in Perl.
+</P>
+<P>
+<PRE>
+  PCRE_DOTALL
+</PRE>
+</P>
+<P>
+If this bit is set, a dot metacharater in the pattern matches all characters,
+including newlines. Without it, newlines are excluded. This option is
+equivalent to Perl's /s option. A negative class such as [^a] always matches a
+newline character, independent of the setting of this option.
+</P>
+<P>
+<PRE>
+  PCRE_EXTENDED
+</PRE>
+</P>
+<P>
+If this bit is set, whitespace data characters in the pattern are totally
+ignored except when escaped or inside a character class, and characters between
+an unescaped # outside a character class and the next newline character,
+inclusive, are also ignored. This is equivalent to Perl's /x option, and makes
+it possible to include comments inside complicated patterns. Note, however,
+that this applies only to data characters. Whitespace characters may never
+appear within special character sequences in a pattern, for example within the
+sequence (?( which introduces a conditional subpattern.
+</P>
+<P>
+<PRE>
+  PCRE_EXTRA
+</PRE>
+</P>
+<P>
+This option was invented in order to turn on additional functionality of PCRE
+that is incompatible with Perl, but it is currently of very little use. When
+set, any backslash in a pattern that is followed by a letter that has no
+special meaning causes an error, thus reserving these combinations for future
+expansion. By default, as in Perl, a backslash followed by a letter with no
+special meaning is treated as a literal. There are at present no other features
+controlled by this option. It can also be set by a (?X) option setting within a
+pattern.
+</P>
+<P>
+<PRE>
+  PCRE_MULTILINE
+</PRE>
+</P>
+<P>
+By default, PCRE treats the subject string as consisting of a single "line" of
+characters (even if it actually contains several newlines). The "start of line"
+metacharacter (^) matches only at the start of the string, while the "end of
+line" metacharacter ($) matches only at the end of the string, or before a
+terminating newline (unless PCRE_DOLLAR_ENDONLY is set). This is the same as
+Perl.
+</P>
+<P>
+When PCRE_MULTILINE it is set, the "start of line" and "end of line" constructs
+match immediately following or immediately before any newline in the subject
+string, respectively, as well as at the very start and end. This is equivalent
+to Perl's /m option. If there are no "\n" characters in a subject string, or
+no occurrences of ^ or $ in a pattern, setting PCRE_MULTILINE has no
+effect.
+</P>
+<P>
+<PRE>
+  PCRE_UNGREEDY
+</PRE>
+</P>
+<P>
+This option inverts the "greediness" of the quantifiers so that they are not
+greedy by default, but become greedy if followed by "?". It is not compatible
+with Perl. It can also be set by a (?U) option setting within the pattern.
+</P>
+<LI><A NAME="SEC6" HREF="#TOC1">STUDYING A PATTERN</A>
+<P>
+When a pattern is going to be used several times, it is worth spending more
+time analyzing it in order to speed up the time taken for matching. The
+function <B>pcre_study()</B> takes a pointer to a compiled pattern as its first
+argument, and returns a pointer to a <B>pcre_extra</B> block (another <B>void</B>
+typedef) containing additional information about the pattern; this can be
+passed to <B>pcre_exec()</B>. If no additional information is available, NULL
+is returned.
+</P>
+<P>
+The second argument contains option bits. At present, no options are defined
+for <B>pcre_study()</B>, and this argument should always be zero.
+</P>
+<P>
+The third argument for <B>pcre_study()</B> is a pointer to an error message. If
+studying succeeds (even if no data is returned), the variable it points to is
+set to NULL. Otherwise it points to a textual error message.
+</P>
+<P>
+At present, studying a pattern is useful only for non-anchored patterns that do
+not have a single fixed starting character. A bitmap of possible starting
+characters is created.
+</P>
+<LI><A NAME="SEC7" HREF="#TOC1">LOCALE SUPPORT</A>
+<P>
+PCRE handles caseless matching, and determines whether characters are letters,
+digits, or whatever, by reference to a set of tables. The library contains a
+default set of tables which is created in the default C locale when PCRE is
+compiled. This is used when the final argument of <B>pcre_compile()</B> is NULL,
+and is sufficient for many applications.
+</P>
+<P>
+An alternative set of tables can, however, be supplied. Such tables are built
+by calling the <B>pcre_maketables()</B> function, which has no arguments, in the
+relevant locale. The result can then be passed to <B>pcre_compile()</B> as often
+as necessary. For example, to build and use tables that are appropriate for the
+French locale (where accented characters with codes greater than 128 are
+treated as letters), the following code could be used:
+</P>
+<P>
+<PRE>
+  setlocale(LC_CTYPE, "fr");
+  tables = pcre_maketables();
+  re = pcre_compile(..., tables);
+</PRE>
+</P>
+<P>
+The tables are built in memory that is obtained via <B>pcre_malloc</B>. The
+pointer that is passed to <B>pcre_compile</B> is saved with the compiled
+pattern, and the same tables are used via this pointer by <B>pcre_study()</B>
+and <B>pcre_exec()</B>. Thus for any single pattern, compilation, studying and
+matching all happen in the same locale, but different patterns can be compiled
+in different locales. It is the caller's responsibility to ensure that the
+memory containing the tables remains available for as long as it is needed.
+</P>
+<LI><A NAME="SEC8" HREF="#TOC1">INFORMATION ABOUT A PATTERN</A>
+<P>
+The <B>pcre_fullinfo()</B> function returns information about a compiled
+pattern. It replaces the obsolete <B>pcre_info()</B> function, which is
+nevertheless retained for backwards compability (and is documented below).
+</P>
+<P>
+The first argument for <B>pcre_fullinfo()</B> is a pointer to the compiled
+pattern. The second argument is the result of <B>pcre_study()</B>, or NULL if
+the pattern was not studied. The third argument specifies which piece of
+information is required, while the fourth argument is a pointer to a variable
+to receive the data. The yield of the function is zero for success, or one of
+the following negative numbers:
+</P>
+<P>
+<PRE>
+  PCRE_ERROR_NULL       the argument <I>code</I> was NULL
+                        the argument <I>where</I> was NULL
+  PCRE_ERROR_BADMAGIC   the "magic number" was not found
+  PCRE_ERROR_BADOPTION  the value of <I>what</I> was invalid
+</PRE>
+</P>
+<P>
+The possible values for the third argument are defined in <B>pcre.h</B>, and are
+as follows:
+</P>
+<P>
+<PRE>
+  PCRE_INFO_OPTIONS
+</PRE>
+</P>
+<P>
+Return a copy of the options with which the pattern was compiled. The fourth
+argument should point to au <B>unsigned long int</B> variable. These option bits
+are those specified in the call to <B>pcre_compile()</B>, modified by any
+top-level option settings within the pattern itself, and with the PCRE_ANCHORED
+bit forcibly set if the form of the pattern implies that it can match only at
+the start of a subject string.
+</P>
+<P>
+<PRE>
+  PCRE_INFO_SIZE
+</PRE>
+</P>
+<P>
+Return the size of the compiled pattern, that is, the value that was passed as
+the argument to <B>pcre_malloc()</B> when PCRE was getting memory in which to
+place the compiled data. The fourth argument should point to a <B>size_t</B>
+variable.
+</P>
+<P>
+<PRE>
+  PCRE_INFO_CAPTURECOUNT
+</PRE>
+</P>
+<P>
+Return the number of capturing subpatterns in the pattern. The fourth argument
+should point to an \fbint\fR variable.
+</P>
+<P>
+<PRE>
+  PCRE_INFO_BACKREFMAX
+</PRE>
+</P>
+<P>
+Return the number of the highest back reference in the pattern. The fourth
+argument should point to an <B>int</B> variable. Zero is returned if there are
+no back references.
+</P>
+<P>
+<PRE>
+  PCRE_INFO_FIRSTCHAR
+</PRE>
+</P>
+<P>
+Return information about the first character of any matched string, for a
+non-anchored pattern. If there is a fixed first character, e.g. from a pattern
+such as (cat|cow|coyote), then it is returned in the integer pointed to by
+<I>where</I>. Otherwise, if either
+</P>
+<P>
+(a) the pattern was compiled with the PCRE_MULTILINE option, and every branch
+starts with "^", or
+</P>
+<P>
+(b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not set
+(if it were set, the pattern would be anchored),
+</P>
+<P>
+then -1 is returned, indicating that the pattern matches only at the
+start of a subject string or after any "\n" within the string. Otherwise -2 is
+returned. For anchored patterns, -2 is returned.
+</P>
+<P>
+<PRE>
+  PCRE_INFO_FIRSTTABLE
+</PRE>
+</P>
+<P>
+If the pattern was studied, and this resulted in the construction of a 256-bit
+table indicating a fixed set of characters for the first character in any
+matching string, a pointer to the table is returned. Otherwise NULL is
+returned. The fourth argument should point to an <B>unsigned char *</B>
+variable.
+</P>
+<P>
+<PRE>
+  PCRE_INFO_LASTLITERAL
+</PRE>
+</P>
+<P>
+For a non-anchored pattern, return the value of the rightmost literal character
+which must exist in any matched string, other than at its start. The fourth
+argument should point to an <B>int</B> variable. If there is no such character,
+or if the pattern is anchored, -1 is returned. For example, for the pattern
+/a\d+z\d+/ the returned value is 'z'.
+</P>
+<P>
+The <B>pcre_info()</B> function is now obsolete because its interface is too
+restrictive to return all the available data about a compiled pattern. New
+programs should use <B>pcre_fullinfo()</B> instead. The yield of
+<B>pcre_info()</B> is the number of capturing subpatterns, or one of the
+following negative numbers:
+</P>
+<P>
+<PRE>
+  PCRE_ERROR_NULL       the argument <I>code</I> was NULL
+  PCRE_ERROR_BADMAGIC   the "magic number" was not found
+</PRE>
+</P>
+<P>
+If the <I>optptr</I> argument is not NULL, a copy of the options with which the
+pattern was compiled is placed in the integer it points to (see
+PCRE_INFO_OPTIONS above).
+</P>
+<P>
+If the pattern is not anchored and the <I>firstcharptr</I> argument is not NULL,
+it is used to pass back information about the first character of any matched
+string (see PCRE_INFO_FIRSTCHAR above).
+</P>
+<LI><A NAME="SEC9" HREF="#TOC1">MATCHING A PATTERN</A>
+<P>
+The function <B>pcre_exec()</B> is called to match a subject string against a
+pre-compiled pattern, which is passed in the <I>code</I> argument. If the
+pattern has been studied, the result of the study should be passed in the
+<I>extra</I> argument. Otherwise this must be NULL.
+</P>
+<P>
+The PCRE_ANCHORED option can be passed in the <I>options</I> argument, whose
+unused bits must be zero. However, if a pattern was compiled with
+PCRE_ANCHORED, or turned out to be anchored by virtue of its contents, it
+cannot be made unachored at matching time.
+</P>
+<P>
+There are also three further options that can be set only at matching time:
+</P>
+<P>
+<PRE>
+  PCRE_NOTBOL
+</PRE>
+</P>
+<P>
+The first character of the string is not the beginning of a line, so the
+circumflex metacharacter should not match before it. Setting this without
+PCRE_MULTILINE (at compile time) causes circumflex never to match.
+</P>
+<P>
+<PRE>
+  PCRE_NOTEOL
+</PRE>
+</P>
+<P>
+The end of the string is not the end of a line, so the dollar metacharacter
+should not match it nor (except in multiline mode) a newline immediately before
+it. Setting this without PCRE_MULTILINE (at compile time) causes dollar never
+to match.
+</P>
+<P>
+<PRE>
+  PCRE_NOTEMPTY
+</PRE>
+</P>
+<P>
+An empty string is not considered to be a valid match if this option is set. If
+there are alternatives in the pattern, they are tried. If all the alternatives
+match the empty string, the entire match fails. For example, if the pattern
+</P>
+<P>
+<PRE>
+  a?b?
+</PRE>
+</P>
+<P>
+is applied to a string not beginning with "a" or "b", it matches the empty
+string at the start of the subject. With PCRE_NOTEMPTY set, this match is not
+valid, so PCRE searches further into the string for occurrences of "a" or "b".
+</P>
+<P>
+Perl has no direct equivalent of PCRE_NOTEMPTY, but it does make a special case
+of a pattern match of the empty string within its <B>split()</B> function, and
+when using the /g modifier. It is possible to emulate Perl's behaviour after
+matching a null string by first trying the match again at the same offset with
+PCRE_NOTEMPTY set, and then if that fails by advancing the starting offset (see
+below) and trying an ordinary match again.
+</P>
+<P>
+The subject string is passed as a pointer in <I>subject</I>, a length in
+<I>length</I>, and a starting offset in <I>startoffset</I>. Unlike the pattern
+string, it may contain binary zero characters. When the starting offset is
+zero, the search for a match starts at the beginning of the subject, and this
+is by far the most common case.
+</P>
+<P>
+A non-zero starting offset is useful when searching for another match in the
+same subject by calling <B>pcre_exec()</B> again after a previous success.
+Setting <I>startoffset</I> differs from just passing over a shortened string and
+setting PCRE_NOTBOL in the case of a pattern that begins with any kind of
+lookbehind. For example, consider the pattern
+</P>
+<P>
+<PRE>
+  \Biss\B
+</PRE>
+</P>
+<P>
+which finds occurrences of "iss" in the middle of words. (\B matches only if
+the current position in the subject is not a word boundary.) When applied to
+the string "Mississipi" the first call to <B>pcre_exec()</B> finds the first
+occurrence. If <B>pcre_exec()</B> is called again with just the remainder of the
+subject, namely "issipi", it does not match, because \B is always false at the
+start of the subject, which is deemed to be a word boundary. However, if
+<B>pcre_exec()</B> is passed the entire string again, but with <I>startoffset</I>
+set to 4, it finds the second occurrence of "iss" because it is able to look
+behind the starting point to discover that it is preceded by a letter.
+</P>
+<P>
+If a non-zero starting offset is passed when the pattern is anchored, one
+attempt to match at the given offset is tried. This can only succeed if the
+pattern does not require the match to be at the start of the subject.
+</P>
+<P>
+In general, a pattern matches a certain portion of the subject, and in
+addition, further substrings from the subject may be picked out by parts of the
+pattern. Following the usage in Jeffrey Friedl's book, this is called
+"capturing" in what follows, and the phrase "capturing subpattern" is used for
+a fragment of a pattern that picks out a substring. PCRE supports several other
+kinds of parenthesized subpattern that do not cause substrings to be captured.
+</P>
+<P>
+Captured substrings are returned to the caller via a vector of integer offsets
+whose address is passed in <I>ovector</I>. The number of elements in the vector
+is passed in <I>ovecsize</I>. The first two-thirds of the vector is used to pass
+back captured substrings, each substring using a pair of integers. The
+remaining third of the vector is used as workspace by <B>pcre_exec()</B> while
+matching capturing subpatterns, and is not available for passing back
+information. The length passed in <I>ovecsize</I> should always be a multiple of
+three. If it is not, it is rounded down.
+</P>
+<P>
+When a match has been successful, information about captured substrings is
+returned in pairs of integers, starting at the beginning of <I>ovector</I>, and
+continuing up to two-thirds of its length at the most. The first element of a
+pair is set to the offset of the first character in a substring, and the second
+is set to the offset of the first character after the end of a substring. The
+first pair, <I>ovector[0]</I> and <I>ovector[1]</I>, identify the portion of the
+subject string matched by the entire pattern. The next pair is used for the
+first capturing subpattern, and so on. The value returned by <B>pcre_exec()</B>
+is the number of pairs that have been set. If there are no capturing
+subpatterns, the return value from a successful match is 1, indicating that
+just the first pair of offsets has been set.
+</P>
+<P>
+Some convenience functions are provided for extracting the captured substrings
+as separate strings. These are described in the following section.
+</P>
+<P>
+It is possible for an capturing subpattern number <I>n+1</I> to match some
+part of the subject when subpattern <I>n</I> has not been used at all. For
+example, if the string "abc" is matched against the pattern (a|(z))(bc)
+subpatterns 1 and 3 are matched, but 2 is not. When this happens, both offset
+values corresponding to the unused subpattern are set to -1.
+</P>
+<P>
+If a capturing subpattern is matched repeatedly, it is the last portion of the
+string that it matched that gets returned.
+</P>
+<P>
+If the vector is too small to hold all the captured substrings, it is used as
+far as possible (up to two-thirds of its length), and the function returns a
+value of zero. In particular, if the substring offsets are not of interest,
+<B>pcre_exec()</B> may be called with <I>ovector</I> passed as NULL and
+<I>ovecsize</I> as zero. However, if the pattern contains back references and
+the <I>ovector</I> isn't big enough to remember the related substrings, PCRE has
+to get additional memory for use during matching. Thus it is usually advisable
+to supply an <I>ovector</I>.
+</P>
+<P>
+Note that <B>pcre_info()</B> can be used to find out how many capturing
+subpatterns there are in a compiled pattern. The smallest size for
+<I>ovector</I> that will allow for <I>n</I> captured substrings in addition to
+the offsets of the substring matched by the whole pattern is (<I>n</I>+1)*3.
+</P>
+<P>
+If <B>pcre_exec()</B> fails, it returns a negative number. The following are
+defined in the header file:
+</P>
+<P>
+<PRE>
+  PCRE_ERROR_NOMATCH        (-1)
+</PRE>
+</P>
+<P>
+The subject string did not match the pattern.
+</P>
+<P>
+<PRE>
+  PCRE_ERROR_NULL           (-2)
+</PRE>
+</P>
+<P>
+Either <I>code</I> or <I>subject</I> was passed as NULL, or <I>ovector</I> was
+NULL and <I>ovecsize</I> was not zero.
+</P>
+<P>
+<PRE>
+  PCRE_ERROR_BADOPTION      (-3)
+</PRE>
+</P>
+<P>
+An unrecognized bit was set in the <I>options</I> argument.
+</P>
+<P>
+<PRE>
+  PCRE_ERROR_BADMAGIC       (-4)
+</PRE>
+</P>
+<P>
+PCRE stores a 4-byte "magic number" at the start of the compiled code, to catch
+the case when it is passed a junk pointer. This is the error it gives when the
+magic number isn't present.
+</P>
+<P>
+<PRE>
+  PCRE_ERROR_UNKNOWN_NODE   (-5)
+</PRE>
+</P>
+<P>
+While running the pattern match, an unknown item was encountered in the
+compiled pattern. This error could be caused by a bug in PCRE or by overwriting
+of the compiled pattern.
+</P>
+<P>
+<PRE>
+  PCRE_ERROR_NOMEMORY       (-6)
+</PRE>
+</P>
+<P>
+If a pattern contains back references, but the <I>ovector</I> that is passed to
+<B>pcre_exec()</B> is not big enough to remember the referenced substrings, PCRE
+gets a block of memory at the start of matching to use for this purpose. If the
+call via <B>pcre_malloc()</B> fails, this error is given. The memory is freed at
+the end of matching.
+</P>
+<LI><A NAME="SEC10" HREF="#TOC1">EXTRACTING CAPTURED SUBSTRINGS</A>
+<P>
+Captured substrings can be accessed directly by using the offsets returned by
+<B>pcre_exec()</B> in <I>ovector</I>. For convenience, the functions
+<B>pcre_copy_substring()</B>, <B>pcre_get_substring()</B>, and
+<B>pcre_get_substring_list()</B> are provided for extracting captured substrings
+as new, separate, zero-terminated strings. A substring that contains a binary
+zero is correctly extracted and has a further zero added on the end, but the
+result does not, of course, function as a C string.
+</P>
+<P>
+The first three arguments are the same for all three functions: <I>subject</I>
+is the subject string which has just been successfully matched, <I>ovector</I>
+is a pointer to the vector of integer offsets that was passed to
+<B>pcre_exec()</B>, and <I>stringcount</I> is the number of substrings that
+were captured by the match, including the substring that matched the entire
+regular expression. This is the value returned by <B>pcre_exec</B> if it
+is greater than zero. If <B>pcre_exec()</B> returned zero, indicating that it
+ran out of space in <I>ovector</I>, then the value passed as
+<I>stringcount</I> should be the size of the vector divided by three.
+</P>
+<P>
+The functions <B>pcre_copy_substring()</B> and <B>pcre_get_substring()</B>
+extract a single substring, whose number is given as <I>stringnumber</I>. A
+value of zero extracts the substring that matched the entire pattern, while
+higher values extract the captured substrings. For <B>pcre_copy_substring()</B>,
+the string is placed in <I>buffer</I>, whose length is given by
+<I>buffersize</I>, while for <B>pcre_get_substring()</B> a new block of store is
+obtained via <B>pcre_malloc</B>, and its address is returned via
+<I>stringptr</I>. The yield of the function is the length of the string, not
+including the terminating zero, or one of
+</P>
+<P>
+<PRE>
+  PCRE_ERROR_NOMEMORY       (-6)
+</PRE>
+</P>
+<P>
+The buffer was too small for <B>pcre_copy_substring()</B>, or the attempt to get
+memory failed for <B>pcre_get_substring()</B>.
+</P>
+<P>
+<PRE>
+  PCRE_ERROR_NOSUBSTRING    (-7)
+</PRE>
+</P>
+<P>
+There is no substring whose number is <I>stringnumber</I>.
+</P>
+<P>
+The <B>pcre_get_substring_list()</B> function extracts all available substrings
+and builds a list of pointers to them. All this is done in a single block of
+memory which is obtained via <B>pcre_malloc</B>. The address of the memory block
+is returned via <I>listptr</I>, which is also the start of the list of string
+pointers. The end of the list is marked by a NULL pointer. The yield of the
+function is zero if all went well, or
+</P>
+<P>
+<PRE>
+  PCRE_ERROR_NOMEMORY       (-6)
+</PRE>
+</P>
+<P>
+if the attempt to get the memory block failed.
+</P>
+<P>
+When any of these functions encounter a substring that is unset, which can
+happen when capturing subpattern number <I>n+1</I> matches some part of the
+subject, but subpattern <I>n</I> has not been used at all, they return an empty
+string. This can be distinguished from a genuine zero-length substring by
+inspecting the appropriate offset in <I>ovector</I>, which is negative for unset
+substrings.
+</P>
+<LI><A NAME="SEC11" HREF="#TOC1">LIMITATIONS</A>
+<P>
+There are some size limitations in PCRE but it is hoped that they will never in
+practice be relevant.
+The maximum length of a compiled pattern is 65539 (sic) bytes.
+All values in repeating quantifiers must be less than 65536.
+The maximum number of capturing subpatterns is 99.
+The maximum number of all parenthesized subpatterns, including capturing
+subpatterns, assertions, and other types of subpattern, is 200.
+</P>
+<P>
+The maximum length of a subject string is the largest positive number that an
+integer variable can hold. However, PCRE uses recursion to handle subpatterns
+and indefinite repetition. This means that the available stack space may limit
+the size of a subject string that can be processed by certain patterns.
+</P>
+<LI><A NAME="SEC12" HREF="#TOC1">DIFFERENCES FROM PERL</A>
+<P>
+The differences described here are with respect to Perl 5.005.
+</P>
+<P>
+1. By default, a whitespace character is any character that the C library
+function <B>isspace()</B> recognizes, though it is possible to compile PCRE with
+alternative character type tables. Normally <B>isspace()</B> matches space,
+formfeed, newline, carriage return, horizontal tab, and vertical tab. Perl 5
+no longer includes vertical tab in its set of whitespace characters. The \v
+escape that was in the Perl documentation for a long time was never in fact
+recognized. However, the character itself was treated as whitespace at least
+up to 5.002. In 5.004 and 5.005 it does not match \s.
+</P>
+<P>
+2. PCRE does not allow repeat quantifiers on lookahead assertions. Perl permits
+them, but they do not mean what you might think. For example, (?!a){3} does
+not assert that the next three characters are not "a". It just asserts that the
+next character is not "a" three times.
+</P>
+<P>
+3. Capturing subpatterns that occur inside negative lookahead assertions are
+counted, but their entries in the offsets vector are never set. Perl sets its
+numerical variables from any such patterns that are matched before the
+assertion fails to match something (thereby succeeding), but only if the
+negative lookahead assertion contains just one branch.
+</P>
+<P>
+4. Though binary zero characters are supported in the subject string, they are
+not allowed in a pattern string because it is passed as a normal C string,
+terminated by zero. The escape sequence "\0" can be used in the pattern to
+represent a binary zero.
+</P>
+<P>
+5. The following Perl escape sequences are not supported: \l, \u, \L, \U,
+\E, \Q. In fact these are implemented by Perl's general string-handling and
+are not part of its pattern matching engine.
+</P>
+<P>
+6. The Perl \G assertion is not supported as it is not relevant to single
+pattern matches.
+</P>
+<P>
+7. Fairly obviously, PCRE does not support the (?{code}) and (?p{code})
+constructions. However, there is some experimental support for recursive
+patterns using the non-Perl item (?R).
+</P>
+<P>
+8. There are at the time of writing some oddities in Perl 5.005_02 concerned
+with the settings of captured strings when part of a pattern is repeated. For
+example, matching "aba" against the pattern /^(a(b)?)+$/ sets $2 to the value
+"b", but matching "aabbaa" against /^(aa(bb)?)+$/ leaves $2 unset. However, if
+the pattern is changed to /^(aa(b(b))?)+$/ then $2 (and $3) get set.
+</P>
+<P>
+In Perl 5.004 $2 is set in both cases, and that is also true of PCRE. If in the
+future Perl changes to a consistent state that is different, PCRE may change to
+follow.
+</P>
+<P>
+9. Another as yet unresolved discrepancy is that in Perl 5.005_02 the pattern
+/^(a)?(?(1)a|b)+$/ matches the string "a", whereas in PCRE it does not.
+However, in both Perl and PCRE /^(a)?a/ matched against "a" leaves $1 unset.
+</P>
+<P>
+10. PCRE provides some extensions to the Perl regular expression facilities:
+</P>
+<P>
+(a) Although lookbehind assertions must match fixed length strings, each
+alternative branch of a lookbehind assertion can match a different length of
+string. Perl 5.005 requires them all to have the same length.
+</P>
+<P>
+(b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is not set, the $ meta-
+character matches only at the very end of the string.
+</P>
+<P>
+(c) If PCRE_EXTRA is set, a backslash followed by a letter with no special
+meaning is faulted.
+</P>
+<P>
+(d) If PCRE_UNGREEDY is set, the greediness of the repetition quantifiers is
+inverted, that is, by default they are not greedy, but if followed by a
+question mark they are.
+</P>
+<P>
+(e) PCRE_ANCHORED can be used to force a pattern to be tried only at the start
+of the subject.
+</P>
+<P>
+(f) The PCRE_NOTBOL, PCRE_NOTEOL, and PCRE_NOTEMPTY options for
+<B>pcre_exec()</B> have no Perl equivalents.
+</P>
+<P>
+(g) The (?R) construct allows for recursive pattern matching (Perl 5.6 can do
+this using the (?p{code}) construct, which PCRE cannot of course support.)
+</P>
+<LI><A NAME="SEC13" HREF="#TOC1">REGULAR EXPRESSION DETAILS</A>
+<P>
+The syntax and semantics of the regular expressions supported by PCRE are
+described below. Regular expressions are also described in the Perl
+documentation and in a number of other books, some of which have copious
+examples. Jeffrey Friedl's "Mastering Regular Expressions", published by
+O'Reilly (ISBN 1-56592-257), covers them in great detail. The description
+here is intended as reference documentation.
+</P>
+<P>
+A regular expression is a pattern that is matched against a subject string from
+left to right. Most characters stand for themselves in a pattern, and match the
+corresponding characters in the subject. As a trivial example, the pattern
+</P>
+<P>
+<PRE>
+  The quick brown fox
+</PRE>
+</P>
+<P>
+matches a portion of a subject string that is identical to itself. The power of
+regular expressions comes from the ability to include alternatives and
+repetitions in the pattern. These are encoded in the pattern by the use of
+<I>meta-characters</I>, which do not stand for themselves but instead are
+interpreted in some special way.
+</P>
+<P>
+There are two different sets of meta-characters: those that are recognized
+anywhere in the pattern except within square brackets, and those that are
+recognized in square brackets. Outside square brackets, the meta-characters are
+as follows:
+</P>
+<P>
+<PRE>
+  \      general escape character with several uses
+  ^      assert start of subject (or line, in multiline mode)
+  $      assert end of subject (or line, in multiline mode)
+  .      match any character except newline (by default)
+  [      start character class definition
+  |      start of alternative branch
+  (      start subpattern
+  )      end subpattern
+  ?      extends the meaning of (
+         also 0 or 1 quantifier
+         also quantifier minimizer
+  *      0 or more quantifier
+  +      1 or more quantifier
+  {      start min/max quantifier
+</PRE>
+</P>
+<P>
+Part of a pattern that is in square brackets is called a "character class". In
+a character class the only meta-characters are:
+</P>
+<P>
+<PRE>
+  \      general escape character
+  ^      negate the class, but only if the first character
+  -      indicates character range
+  ]      terminates the character class
+</PRE>
+</P>
+<P>
+The following sections describe the use of each of the meta-characters.
+</P>
+<LI><A NAME="SEC14" HREF="#TOC1">BACKSLASH</A>
+<P>
+The backslash character has several uses. Firstly, if it is followed by a
+non-alphameric character, it takes away any special meaning that character may
+have. This use of backslash as an escape character applies both inside and
+outside character classes.
+</P>
+<P>
+For example, if you want to match a "*" character, you write "\*" in the
+pattern. This applies whether or not the following character would otherwise be
+interpreted as a meta-character, so it is always safe to precede a
+non-alphameric with "\" to specify that it stands for itself. In particular,
+if you want to match a backslash, you write "\\".
+</P>
+<P>
+If a pattern is compiled with the PCRE_EXTENDED option, whitespace in the
+pattern (other than in a character class) and characters between a "#" outside
+a character class and the next newline character are ignored. An escaping
+backslash can be used to include a whitespace or "#" character as part of the
+pattern.
+</P>
+<P>
+A second use of backslash provides a way of encoding non-printing characters
+in patterns in a visible manner. There is no restriction on the appearance of
+non-printing characters, apart from the binary zero that terminates a pattern,
+but when a pattern is being prepared by text editing, it is usually easier to
+use one of the following escape sequences than the binary character it
+represents:
+</P>
+<P>
+<PRE>
+  \a     alarm, that is, the BEL character (hex 07)
+  \cx    "control-x", where x is any character
+  \e     escape (hex 1B)
+  \f     formfeed (hex 0C)
+  \n     newline (hex 0A)
+  \r     carriage return (hex 0D)
+  \t     tab (hex 09)
+  \xhh   character with hex code hh
+  \ddd   character with octal code ddd, or backreference
+</PRE>
+</P>
+<P>
+The precise effect of "\cx" is as follows: if "x" is a lower case letter, it
+is converted to upper case. Then bit 6 of the character (hex 40) is inverted.
+Thus "\cz" becomes hex 1A, but "\c{" becomes hex 3B, while "\c;" becomes hex
+7B.
+</P>
+<P>
+After "\x", up to two hexadecimal digits are read (letters can be in upper or
+lower case).
+</P>
+<P>
+After "\0" up to two further octal digits are read. In both cases, if there
+are fewer than two digits, just those that are present are used. Thus the
+sequence "\0\x\07" specifies two binary zeros followed by a BEL character.
+Make sure you supply two digits after the initial zero if the character that
+follows is itself an octal digit.
+</P>
+<P>
+The handling of a backslash followed by a digit other than 0 is complicated.
+Outside a character class, PCRE reads it and any following digits as a decimal
+number. If the number is less than 10, or if there have been at least that many
+previous capturing left parentheses in the expression, the entire sequence is
+taken as a <I>back reference</I>. A description of how this works is given
+later, following the discussion of parenthesized subpatterns.
+</P>
+<P>
+Inside a character class, or if the decimal number is greater than 9 and there
+have not been that many capturing subpatterns, PCRE re-reads up to three octal
+digits following the backslash, and generates a single byte from the least
+significant 8 bits of the value. Any subsequent digits stand for themselves.
+For example:
+</P>
+<P>
+<PRE>
+  \040   is another way of writing a space
+  \40    is the same, provided there are fewer than 40
+            previous capturing subpatterns
+  \7     is always a back reference
+  \11    might be a back reference, or another way of
+            writing a tab
+  \011   is always a tab
+  \0113  is a tab followed by the character "3"
+  \113   is the character with octal code 113 (since there
+            can be no more than 99 back references)
+  \377   is a byte consisting entirely of 1 bits
+  \81    is either a back reference, or a binary zero
+            followed by the two characters "8" and "1"
+</PRE>
+</P>
+<P>
+Note that octal values of 100 or greater must not be introduced by a leading
+zero, because no more than three octal digits are ever read.
+</P>
+<P>
+All the sequences that define a single byte value can be used both inside and
+outside character classes. In addition, inside a character class, the sequence
+"\b" is interpreted as the backspace character (hex 08). Outside a character
+class it has a different meaning (see below).
+</P>
+<P>
+The third use of backslash is for specifying generic character types:
+</P>
+<P>
+<PRE>
+  \d     any decimal digit
+  \D     any character that is not a decimal digit
+  \s     any whitespace character
+  \S     any character that is not a whitespace character
+  \w     any "word" character
+  \W     any "non-word" character
+</PRE>
+</P>
+<P>
+Each pair of escape sequences partitions the complete set of characters into
+two disjoint sets. Any given character matches one, and only one, of each pair.
+</P>
+<P>
+A "word" character is any letter or digit or the underscore character, that is,
+any character which can be part of a Perl "word". The definition of letters and
+digits is controlled by PCRE's character tables, and may vary if locale-
+specific matching is taking place (see "Locale support" above). For example, in
+the "fr" (French) locale, some character codes greater than 128 are used for
+accented letters, and these are matched by \w.
+</P>
+<P>
+These character type sequences can appear both inside and outside character
+classes. They each match one character of the appropriate type. If the current
+matching point is at the end of the subject string, all of them fail, since
+there is no character to match.
+</P>
+<P>
+The fourth use of backslash is for certain simple assertions. An assertion
+specifies a condition that has to be met at a particular point in a match,
+without consuming any characters from the subject string. The use of
+subpatterns for more complicated assertions is described below. The backslashed
+assertions are
+</P>
+<P>
+<PRE>
+  \b     word boundary
+  \B     not a word boundary
+  \A     start of subject (independent of multiline mode)
+  \Z     end of subject or newline at end (independent of multiline mode)
+  \z     end of subject (independent of multiline mode)
+</PRE>
+</P>
+<P>
+These assertions may not appear in character classes (but note that "\b" has a
+different meaning, namely the backspace character, inside a character class).
+</P>
+<P>
+A word boundary is a position in the subject string where the current character
+and the previous character do not both match \w or \W (i.e. one matches
+\w and the other matches \W), or the start or end of the string if the
+first or last character matches \w, respectively.
+</P>
+<P>
+The \A, \Z, and \z assertions differ from the traditional circumflex and
+dollar (described below) in that they only ever match at the very start and end
+of the subject string, whatever options are set. They are not affected by the
+PCRE_NOTBOL or PCRE_NOTEOL options. If the <I>startoffset</I> argument of
+<B>pcre_exec()</B> is non-zero, \A can never match. The difference between \Z
+and \z is that \Z matches before a newline that is the last character of the
+string as well as at the end of the string, whereas \z matches only at the
+end.
+</P>
+<LI><A NAME="SEC15" HREF="#TOC1">CIRCUMFLEX AND DOLLAR</A>
+<P>
+Outside a character class, in the default matching mode, the circumflex
+character is an assertion which is true only if the current matching point is
+at the start of the subject string. If the <I>startoffset</I> argument of
+<B>pcre_exec()</B> is non-zero, circumflex can never match. Inside a character
+class, circumflex has an entirely different meaning (see below).
+</P>
+<P>
+Circumflex need not be the first character of the pattern if a number of
+alternatives are involved, but it should be the first thing in each alternative
+in which it appears if the pattern is ever to match that branch. If all
+possible alternatives start with a circumflex, that is, if the pattern is
+constrained to match only at the start of the subject, it is said to be an
+"anchored" pattern. (There are also other constructs that can cause a pattern
+to be anchored.)
+</P>
+<P>
+A dollar character is an assertion which is true only if the current matching
+point is at the end of the subject string, or immediately before a newline
+character that is the last character in the string (by default). Dollar need
+not be the last character of the pattern if a number of alternatives are
+involved, but it should be the last item in any branch in which it appears.
+Dollar has no special meaning in a character class.
+</P>
+<P>
+The meaning of dollar can be changed so that it matches only at the very end of
+the string, by setting the PCRE_DOLLAR_ENDONLY option at compile or matching
+time. This does not affect the \Z assertion.
+</P>
+<P>
+The meanings of the circumflex and dollar characters are changed if the
+PCRE_MULTILINE option is set. When this is the case, they match immediately
+after and immediately before an internal "\n" character, respectively, in
+addition to matching at the start and end of the subject string. For example,
+the pattern /^abc$/ matches the subject string "def\nabc" in multiline mode,
+but not otherwise. Consequently, patterns that are anchored in single line mode
+because all branches start with "^" are not anchored in multiline mode, and a
+match for circumflex is possible when the <I>startoffset</I> argument of
+<B>pcre_exec()</B> is non-zero. The PCRE_DOLLAR_ENDONLY option is ignored if
+PCRE_MULTILINE is set.
+</P>
+<P>
+Note that the sequences \A, \Z, and \z can be used to match the start and
+end of the subject in both modes, and if all branches of a pattern start with
+\A is it always anchored, whether PCRE_MULTILINE is set or not.
+</P>
+<LI><A NAME="SEC16" HREF="#TOC1">FULL STOP (PERIOD, DOT)</A>
+<P>
+Outside a character class, a dot in the pattern matches any one character in
+the subject, including a non-printing character, but not (by default) newline.
+If the PCRE_DOTALL option is set, then dots match newlines as well. The
+handling of dot is entirely independent of the handling of circumflex and
+dollar, the only relationship being that they both involve newline characters.
+Dot has no special meaning in a character class.
+</P>
+<LI><A NAME="SEC17" HREF="#TOC1">SQUARE BRACKETS</A>
+<P>
+An opening square bracket introduces a character class, terminated by a closing
+square bracket. A closing square bracket on its own is not special. If a
+closing square bracket is required as a member of the class, it should be the
+first data character in the class (after an initial circumflex, if present) or
+escaped with a backslash.
+</P>
+<P>
+A character class matches a single character in the subject; the character must
+be in the set of characters defined by the class, unless the first character in
+the class is a circumflex, in which case the subject character must not be in
+the set defined by the class. If a circumflex is actually required as a member
+of the class, ensure it is not the first character, or escape it with a
+backslash.
+</P>
+<P>
+For example, the character class [aeiou] matches any lower case vowel, while
+[^aeiou] matches any character that is not a lower case vowel. Note that a
+circumflex is just a convenient notation for specifying the characters which
+are in the class by enumerating those that are not. It is not an assertion: it
+still consumes a character from the subject string, and fails if the current
+pointer is at the end of the string.
+</P>
+<P>
+When caseless matching is set, any letters in a class represent both their
+upper case and lower case versions, so for example, a caseless [aeiou] matches
+"A" as well as "a", and a caseless [^aeiou] does not match "A", whereas a
+caseful version would.
+</P>
+<P>
+The newline character is never treated in any special way in character classes,
+whatever the setting of the PCRE_DOTALL or PCRE_MULTILINE options is. A class
+such as [^a] will always match a newline.
+</P>
+<P>
+The minus (hyphen) character can be used to specify a range of characters in a
+character class. For example, [d-m] matches any letter between d and m,
+inclusive. If a minus character is required in a class, it must be escaped with
+a backslash or appear in a position where it cannot be interpreted as
+indicating a range, typically as the first or last character in the class.
+</P>
+<P>
+It is not possible to have the literal character "]" as the end character of a
+range. A pattern such as [W-]46] is interpreted as a class of two characters
+("W" and "-") followed by a literal string "46]", so it would match "W46]" or
+"-46]". However, if the "]" is escaped with a backslash it is interpreted as
+the end of range, so [W-\]46] is interpreted as a single class containing a
+range followed by two separate characters. The octal or hexadecimal
+representation of "]" can also be used to end a range.
+</P>
+<P>
+Ranges operate in ASCII collating sequence. They can also be used for
+characters specified numerically, for example [\000-\037]. If a range that
+includes letters is used when caseless matching is set, it matches the letters
+in either case. For example, [W-c] is equivalent to [][\^_`wxyzabc], matched
+caselessly, and if character tables for the "fr" locale are in use,
+[\xc8-\xcb] matches accented E characters in both cases.
+</P>
+<P>
+The character types \d, \D, \s, \S, \w, and \W may also appear in a
+character class, and add the characters that they match to the class. For
+example, [\dABCDEF] matches any hexadecimal digit. A circumflex can
+conveniently be used with the upper case character types to specify a more
+restricted set of characters than the matching lower case type. For example,
+the class [^\W_] matches any letter or digit, but not underscore.
+</P>
+<P>
+All non-alphameric characters other than \, -, ^ (at the start) and the
+terminating ] are non-special in character classes, but it does no harm if they
+are escaped.
+</P>
+<LI><A NAME="SEC18" HREF="#TOC1">POSIX CHARACTER CLASSES</A>
+<P>
+Perl 5.6 (not yet released at the time of writing) is going to support the
+POSIX notation for character classes, which uses names enclosed by [: and :]
+within the enclosing square brackets. PCRE supports this notation. For example,
+</P>
+<P>
+<PRE>
+  [01[:alpha:]%]
+</PRE>
+</P>
+<P>
+matches "0", "1", any alphabetic character, or "%". The supported class names
+are
+</P>
+<P>
+<PRE>
+  alnum    letters and digits
+  alpha    letters
+  ascii    character codes 0 - 127
+  cntrl    control characters
+  digit    decimal digits (same as \d)
+  graph    printing characters, excluding space
+  lower    lower case letters
+  print    printing characters, including space
+  punct    printing characters, excluding letters and digits
+  space    white space (same as \s)
+  upper    upper case letters
+  word     "word" characters (same as \w)
+  xdigit   hexadecimal digits
+</PRE>
+</P>
+<P>
+The names "ascii" and "word" are Perl extensions. Another Perl extension is
+negation, which is indicated by a ^ character after the colon. For example,
+</P>
+<P>
+<PRE>
+  [12[:^digit:]]
+</PRE>
+</P>
+<P>
+matches "1", "2", or any non-digit. PCRE (and Perl) also recogize the POSIX
+syntax [.ch.] and [=ch=] where "ch" is a "collating element", but these are not
+supported, and an error is given if they are encountered.
+</P>
+<LI><A NAME="SEC19" HREF="#TOC1">VERTICAL BAR</A>
+<P>
+Vertical bar characters are used to separate alternative patterns. For example,
+the pattern
+</P>
+<P>
+<PRE>
+  gilbert|sullivan
+</PRE>
+</P>
+<P>
+matches either "gilbert" or "sullivan". Any number of alternatives may appear,
+and an empty alternative is permitted (matching the empty string).
+The matching process tries each alternative in turn, from left to right,
+and the first one that succeeds is used. If the alternatives are within a
+subpattern (defined below), "succeeds" means matching the rest of the main
+pattern as well as the alternative in the subpattern.
+</P>
+<LI><A NAME="SEC20" HREF="#TOC1">INTERNAL OPTION SETTING</A>
+<P>
+The settings of PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and PCRE_EXTENDED
+can be changed from within the pattern by a sequence of Perl option letters
+enclosed between "(?" and ")". The option letters are
+</P>
+<P>
+<PRE>
+  i  for PCRE_CASELESS
+  m  for PCRE_MULTILINE
+  s  for PCRE_DOTALL
+  x  for PCRE_EXTENDED
+</PRE>
+</P>
+<P>
+For example, (?im) sets caseless, multiline matching. It is also possible to
+unset these options by preceding the letter with a hyphen, and a combined
+setting and unsetting such as (?im-sx), which sets PCRE_CASELESS and
+PCRE_MULTILINE while unsetting PCRE_DOTALL and PCRE_EXTENDED, is also
+permitted. If a letter appears both before and after the hyphen, the option is
+unset.
+</P>
+<P>
+The scope of these option changes depends on where in the pattern the setting
+occurs. For settings that are outside any subpattern (defined below), the
+effect is the same as if the options were set or unset at the start of
+matching. The following patterns all behave in exactly the same way:
+</P>
+<P>
+<PRE>
+  (?i)abc
+  a(?i)bc
+  ab(?i)c
+  abc(?i)
+</PRE>
+</P>
+<P>
+which in turn is the same as compiling the pattern abc with PCRE_CASELESS set.
+In other words, such "top level" settings apply to the whole pattern (unless
+there are other changes inside subpatterns). If there is more than one setting
+of the same option at top level, the rightmost setting is used.
+</P>
+<P>
+If an option change occurs inside a subpattern, the effect is different. This
+is a change of behaviour in Perl 5.005. An option change inside a subpattern
+affects only that part of the subpattern that follows it, so
+</P>
+<P>
+<PRE>
+  (a(?i)b)c
+</PRE>
+</P>
+<P>
+matches abc and aBc and no other strings (assuming PCRE_CASELESS is not used).
+By this means, options can be made to have different settings in different
+parts of the pattern. Any changes made in one alternative do carry on
+into subsequent branches within the same subpattern. For example,
+</P>
+<P>
+<PRE>
+  (a(?i)b|c)
+</PRE>
+</P>
+<P>
+matches "ab", "aB", "c", and "C", even though when matching "C" the first
+branch is abandoned before the option setting. This is because the effects of
+option settings happen at compile time. There would be some very weird
+behaviour otherwise.
+</P>
+<P>
+The PCRE-specific options PCRE_UNGREEDY and PCRE_EXTRA can be changed in the
+same way as the Perl-compatible options by using the characters U and X
+respectively. The (?X) flag setting is special in that it must always occur
+earlier in the pattern than any of the additional features it turns on, even
+when it is at top level. It is best put at the start.
+</P>
+<LI><A NAME="SEC21" HREF="#TOC1">SUBPATTERNS</A>
+<P>
+Subpatterns are delimited by parentheses (round brackets), which can be nested.
+Marking part of a pattern as a subpattern does two things:
+</P>
+<P>
+1. It localizes a set of alternatives. For example, the pattern
+</P>
+<P>
+<PRE>
+  cat(aract|erpillar|)
+</PRE>
+</P>
+<P>
+matches one of the words "cat", "cataract", or "caterpillar". Without the
+parentheses, it would match "cataract", "erpillar" or the empty string.
+</P>
+<P>
+2. It sets up the subpattern as a capturing subpattern (as defined above).
+When the whole pattern matches, that portion of the subject string that matched
+the subpattern is passed back to the caller via the <I>ovector</I> argument of
+<B>pcre_exec()</B>. Opening parentheses are counted from left to right (starting
+from 1) to obtain the numbers of the capturing subpatterns.
+</P>
+<P>
+For example, if the string "the red king" is matched against the pattern
+</P>
+<P>
+<PRE>
+  the ((red|white) (king|queen))
+</PRE>
+</P>
+<P>
+the captured substrings are "red king", "red", and "king", and are numbered 1,
+2, and 3.
+</P>
+<P>
+The fact that plain parentheses fulfil two functions is not always helpful.
+There are often times when a grouping subpattern is required without a
+capturing requirement. If an opening parenthesis is followed by "?:", the
+subpattern does not do any capturing, and is not counted when computing the
+number of any subsequent capturing subpatterns. For example, if the string "the
+white queen" is matched against the pattern
+</P>
+<P>
+<PRE>
+  the ((?:red|white) (king|queen))
+</PRE>
+</P>
+<P>
+the captured substrings are "white queen" and "queen", and are numbered 1 and
+2. The maximum number of captured substrings is 99, and the maximum number of
+all subpatterns, both capturing and non-capturing, is 200.
+</P>
+<P>
+As a convenient shorthand, if any option settings are required at the start of
+a non-capturing subpattern, the option letters may appear between the "?" and
+the ":". Thus the two patterns
+</P>
+<P>
+<PRE>
+  (?i:saturday|sunday)
+  (?:(?i)saturday|sunday)
+</PRE>
+</P>
+<P>
+match exactly the same set of strings. Because alternative branches are tried
+from left to right, and options are not reset until the end of the subpattern
+is reached, an option setting in one branch does affect subsequent branches, so
+the above patterns match "SUNDAY" as well as "Saturday".
+</P>
+<LI><A NAME="SEC22" HREF="#TOC1">REPETITION</A>
+<P>
+Repetition is specified by quantifiers, which can follow any of the following
+items:
+</P>
+<P>
+<PRE>
+  a single character, possibly escaped
+  the . metacharacter
+  a character class
+  a back reference (see next section)
+  a parenthesized subpattern (unless it is an assertion - see below)
+</PRE>
+</P>
+<P>
+The general repetition quantifier specifies a minimum and maximum number of
+permitted matches, by giving the two numbers in curly brackets (braces),
+separated by a comma. The numbers must be less than 65536, and the first must
+be less than or equal to the second. For example:
+</P>
+<P>
+<PRE>
+  z{2,4}
+</PRE>
+</P>
+<P>
+matches "zz", "zzz", or "zzzz". A closing brace on its own is not a special
+character. If the second number is omitted, but the comma is present, there is
+no upper limit; if the second number and the comma are both omitted, the
+quantifier specifies an exact number of required matches. Thus
+</P>
+<P>
+<PRE>
+  [aeiou]{3,}
+</PRE>
+</P>
+<P>
+matches at least 3 successive vowels, but may match many more, while
+</P>
+<P>
+<PRE>
+  \d{8}
+</PRE>
+</P>
+<P>
+matches exactly 8 digits. An opening curly bracket that appears in a position
+where a quantifier is not allowed, or one that does not match the syntax of a
+quantifier, is taken as a literal character. For example, {,6} is not a
+quantifier, but a literal string of four characters.
+</P>
+<P>
+The quantifier {0} is permitted, causing the expression to behave as if the
+previous item and the quantifier were not present.
+</P>
+<P>
+For convenience (and historical compatibility) the three most common
+quantifiers have single-character abbreviations:
+</P>
+<P>
+<PRE>
+  *    is equivalent to {0,}
+  +    is equivalent to {1,}
+  ?    is equivalent to {0,1}
+</PRE>
+</P>
+<P>
+It is possible to construct infinite loops by following a subpattern that can
+match no characters with a quantifier that has no upper limit, for example:
+</P>
+<P>
+<PRE>
+  (a?)*
+</PRE>
+</P>
+<P>
+Earlier versions of Perl and PCRE used to give an error at compile time for
+such patterns. However, because there are cases where this can be useful, such
+patterns are now accepted, but if any repetition of the subpattern does in fact
+match no characters, the loop is forcibly broken.
+</P>
+<P>
+By default, the quantifiers are "greedy", that is, they match as much as
+possible (up to the maximum number of permitted times), without causing the
+rest of the pattern to fail. The classic example of where this gives problems
+is in trying to match comments in C programs. These appear between the
+sequences /* and */ and within the sequence, individual * and / characters may
+appear. An attempt to match C comments by applying the pattern
+</P>
+<P>
+<PRE>
+  /\*.*\*/
+</PRE>
+</P>
+<P>
+to the string
+</P>
+<P>
+<PRE>
+  /* first command */  not comment  /* second comment */
+</PRE>
+</P>
+<P>
+fails, because it matches the entire string due to the greediness of the .*
+item.
+</P>
+<P>
+However, if a quantifier is followed by a question mark, then it ceases to be
+greedy, and instead matches the minimum number of times possible, so the
+pattern
+</P>
+<P>
+<PRE>
+  /\*.*?\*/
+</PRE>
+</P>
+<P>
+does the right thing with the C comments. The meaning of the various
+quantifiers is not otherwise changed, just the preferred number of matches.
+Do not confuse this use of question mark with its use as a quantifier in its
+own right. Because it has two uses, it can sometimes appear doubled, as in
+</P>
+<P>
+<PRE>
+  \d??\d
+</PRE>
+</P>
+<P>
+which matches one digit by preference, but can match two if that is the only
+way the rest of the pattern matches.
+</P>
+<P>
+If the PCRE_UNGREEDY option is set (an option which is not available in Perl)
+then the quantifiers are not greedy by default, but individual ones can be made
+greedy by following them with a question mark. In other words, it inverts the
+default behaviour.
+</P>
+<P>
+When a parenthesized subpattern is quantified with a minimum repeat count that
+is greater than 1 or with a limited maximum, more store is required for the
+compiled pattern, in proportion to the size of the minimum or maximum.
+</P>
+<P>
+If a pattern starts with .* or .{0,} and the PCRE_DOTALL option (equivalent
+to Perl's /s) is set, thus allowing the . to match newlines, then the pattern
+is implicitly anchored, because whatever follows will be tried against every
+character position in the subject string, so there is no point in retrying the
+overall match at any position after the first. PCRE treats such a pattern as
+though it were preceded by \A. In cases where it is known that the subject
+string contains no newlines, it is worth setting PCRE_DOTALL when the pattern
+begins with .* in order to obtain this optimization, or alternatively using ^
+to indicate anchoring explicitly.
+</P>
+<P>
+When a capturing subpattern is repeated, the value captured is the substring
+that matched the final iteration. For example, after
+</P>
+<P>
+<PRE>
+  (tweedle[dume]{3}\s*)+
+</PRE>
+</P>
+<P>
+has matched "tweedledum tweedledee" the value of the captured substring is
+"tweedledee". However, if there are nested capturing subpatterns, the
+corresponding captured values may have been set in previous iterations. For
+example, after
+</P>
+<P>
+<PRE>
+  /(a|(b))+/
+</PRE>
+</P>
+<P>
+matches "aba" the value of the second captured substring is "b".
+</P>
+<LI><A NAME="SEC23" HREF="#TOC1">BACK REFERENCES</A>
+<P>
+Outside a character class, a backslash followed by a digit greater than 0 (and
+possibly further digits) is a back reference to a capturing subpattern earlier
+(i.e. to its left) in the pattern, provided there have been that many previous
+capturing left parentheses.
+</P>
+<P>
+However, if the decimal number following the backslash is less than 10, it is
+always taken as a back reference, and causes an error only if there are not
+that many capturing left parentheses in the entire pattern. In other words, the
+parentheses that are referenced need not be to the left of the reference for
+numbers less than 10. See the section entitled "Backslash" above for further
+details of the handling of digits following a backslash.
+</P>
+<P>
+A back reference matches whatever actually matched the capturing subpattern in
+the current subject string, rather than anything matching the subpattern
+itself. So the pattern
+</P>
+<P>
+<PRE>
+  (sens|respons)e and \1ibility
+</PRE>
+</P>
+<P>
+matches "sense and sensibility" and "response and responsibility", but not
+"sense and responsibility". If caseful matching is in force at the time of the
+back reference, then the case of letters is relevant. For example,
+</P>
+<P>
+<PRE>
+  ((?i)rah)\s+\1
+</PRE>
+</P>
+<P>
+matches "rah rah" and "RAH RAH", but not "RAH rah", even though the original
+capturing subpattern is matched caselessly.
+</P>
+<P>
+There may be more than one back reference to the same subpattern. If a
+subpattern has not actually been used in a particular match, then any back
+references to it always fail. For example, the pattern
+</P>
+<P>
+<PRE>
+  (a|(bc))\2
+</PRE>
+</P>
+<P>
+always fails if it starts to match "a" rather than "bc". Because there may be
+up to 99 back references, all digits following the backslash are taken
+as part of a potential back reference number. If the pattern continues with a
+digit character, then some delimiter must be used to terminate the back
+reference. If the PCRE_EXTENDED option is set, this can be whitespace.
+Otherwise an empty comment can be used.
+</P>
+<P>
+A back reference that occurs inside the parentheses to which it refers fails
+when the subpattern is first used, so, for example, (a\1) never matches.
+However, such references can be useful inside repeated subpatterns. For
+example, the pattern
+</P>
+<P>
+<PRE>
+  (a|b\1)+
+</PRE>
+</P>
+<P>
+matches any number of "a"s and also "aba", "ababaa" etc. At each iteration of
+the subpattern, the back reference matches the character string corresponding
+to the previous iteration. In order for this to work, the pattern must be such
+that the first iteration does not need to match the back reference. This can be
+done using alternation, as in the example above, or by a quantifier with a
+minimum of zero.
+</P>
+<LI><A NAME="SEC24" HREF="#TOC1">ASSERTIONS</A>
+<P>
+An assertion is a test on the characters following or preceding the current
+matching point that does not actually consume any characters. The simple
+assertions coded as \b, \B, \A, \Z, \z, ^ and $ are described above. More
+complicated assertions are coded as subpatterns. There are two kinds: those
+that look ahead of the current position in the subject string, and those that
+look behind it.
+</P>
+<P>
+An assertion subpattern is matched in the normal way, except that it does not
+cause the current matching position to be changed. Lookahead assertions start
+with (?= for positive assertions and (?! for negative assertions. For example,
+</P>
+<P>
+<PRE>
+  \w+(?=;)
+</PRE>
+</P>
+<P>
+matches a word followed by a semicolon, but does not include the semicolon in
+the match, and
+</P>
+<P>
+<PRE>
+  foo(?!bar)
+</PRE>
+</P>
+<P>
+matches any occurrence of "foo" that is not followed by "bar". Note that the
+apparently similar pattern
+</P>
+<P>
+<PRE>
+  (?!foo)bar
+</PRE>
+</P>
+<P>
+does not find an occurrence of "bar" that is preceded by something other than
+"foo"; it finds any occurrence of "bar" whatsoever, because the assertion
+(?!foo) is always true when the next three characters are "bar". A
+lookbehind assertion is needed to achieve this effect.
+</P>
+<P>
+Lookbehind assertions start with (?&#60;= for positive assertions and (?&#60;! for
+negative assertions. For example,
+</P>
+<P>
+<PRE>
+  (?&#60;!foo)bar
+</PRE>
+</P>
+<P>
+does find an occurrence of "bar" that is not preceded by "foo". The contents of
+a lookbehind assertion are restricted such that all the strings it matches must
+have a fixed length. However, if there are several alternatives, they do not
+all have to have the same fixed length. Thus
+</P>
+<P>
+<PRE>
+  (?&#60;=bullock|donkey)
+</PRE>
+</P>
+<P>
+is permitted, but
+</P>
+<P>
+<PRE>
+  (?&#60;!dogs?|cats?)
+</PRE>
+</P>
+<P>
+causes an error at compile time. Branches that match different length strings
+are permitted only at the top level of a lookbehind assertion. This is an
+extension compared with Perl 5.005, which requires all branches to match the
+same length of string. An assertion such as
+</P>
+<P>
+<PRE>
+  (?&#60;=ab(c|de))
+</PRE>
+</P>
+<P>
+is not permitted, because its single top-level branch can match two different
+lengths, but it is acceptable if rewritten to use two top-level branches:
+</P>
+<P>
+<PRE>
+  (?&#60;=abc|abde)
+</PRE>
+</P>
+<P>
+The implementation of lookbehind assertions is, for each alternative, to
+temporarily move the current position back by the fixed width and then try to
+match. If there are insufficient characters before the current position, the
+match is deemed to fail. Lookbehinds in conjunction with once-only subpatterns
+can be particularly useful for matching at the ends of strings; an example is
+given at the end of the section on once-only subpatterns.
+</P>
+<P>
+Several assertions (of any sort) may occur in succession. For example,
+</P>
+<P>
+<PRE>
+  (?&#60;=\d{3})(?&#60;!999)foo
+</PRE>
+</P>
+<P>
+matches "foo" preceded by three digits that are not "999". Notice that each of
+the assertions is applied independently at the same point in the subject
+string. First there is a check that the previous three characters are all
+digits, then there is a check that the same three characters are not "999".
+This pattern does <I>not</I> match "foo" preceded by six characters, the first
+of which are digits and the last three of which are not "999". For example, it
+doesn't match "123abcfoo". A pattern to do that is
+</P>
+<P>
+<PRE>
+  (?&#60;=\d{3}...)(?&#60;!999)foo
+</PRE>
+</P>
+<P>
+This time the first assertion looks at the preceding six characters, checking
+that the first three are digits, and then the second assertion checks that the
+preceding three characters are not "999".
+</P>
+<P>
+Assertions can be nested in any combination. For example,
+</P>
+<P>
+<PRE>
+  (?&#60;=(?&#60;!foo)bar)baz
+</PRE>
+</P>
+<P>
+matches an occurrence of "baz" that is preceded by "bar" which in turn is not
+preceded by "foo", while
+</P>
+<P>
+<PRE>
+  (?&#60;=\d{3}(?!999)...)foo
+</PRE>
+</P>
+<P>
+is another pattern which matches "foo" preceded by three digits and any three
+characters that are not "999".
+</P>
+<P>
+Assertion subpatterns are not capturing subpatterns, and may not be repeated,
+because it makes no sense to assert the same thing several times. If any kind
+of assertion contains capturing subpatterns within it, these are counted for
+the purposes of numbering the capturing subpatterns in the whole pattern.
+However, substring capturing is carried out only for positive assertions,
+because it does not make sense for negative assertions.
+</P>
+<P>
+Assertions count towards the maximum of 200 parenthesized subpatterns.
+</P>
+<LI><A NAME="SEC25" HREF="#TOC1">ONCE-ONLY SUBPATTERNS</A>
+<P>
+With both maximizing and minimizing repetition, failure of what follows
+normally causes the repeated item to be re-evaluated to see if a different
+number of repeats allows the rest of the pattern to match. Sometimes it is
+useful to prevent this, either to change the nature of the match, or to cause
+it fail earlier than it otherwise might, when the author of the pattern knows
+there is no point in carrying on.
+</P>
+<P>
+Consider, for example, the pattern \d+foo when applied to the subject line
+</P>
+<P>
+<PRE>
+  123456bar
+</PRE>
+</P>
+<P>
+After matching all 6 digits and then failing to match "foo", the normal
+action of the matcher is to try again with only 5 digits matching the \d+
+item, and then with 4, and so on, before ultimately failing. Once-only
+subpatterns provide the means for specifying that once a portion of the pattern
+has matched, it is not to be re-evaluated in this way, so the matcher would
+give up immediately on failing to match "foo" the first time. The notation is
+another kind of special parenthesis, starting with (?&#62; as in this example:
+</P>
+<P>
+<PRE>
+  (?&#62;\d+)bar
+</PRE>
+</P>
+<P>
+This kind of parenthesis "locks up" the  part of the pattern it contains once
+it has matched, and a failure further into the pattern is prevented from
+backtracking into it. Backtracking past it to previous items, however, works as
+normal.
+</P>
+<P>
+An alternative description is that a subpattern of this type matches the string
+of characters that an identical standalone pattern would match, if anchored at
+the current point in the subject string.
+</P>
+<P>
+Once-only subpatterns are not capturing subpatterns. Simple cases such as the
+above example can be thought of as a maximizing repeat that must swallow
+everything it can. So, while both \d+ and \d+? are prepared to adjust the
+number of digits they match in order to make the rest of the pattern match,
+(?&#62;\d+) can only match an entire sequence of digits.
+</P>
+<P>
+This construction can of course contain arbitrarily complicated subpatterns,
+and it can be nested.
+</P>
+<P>
+Once-only subpatterns can be used in conjunction with lookbehind assertions to
+specify efficient matching at the end of the subject string. Consider a simple
+pattern such as
+</P>
+<P>
+<PRE>
+  abcd$
+</PRE>
+</P>
+<P>
+when applied to a long string which does not match. Because matching proceeds
+from left to right, PCRE will look for each "a" in the subject and then see if
+what follows matches the rest of the pattern. If the pattern is specified as
+</P>
+<P>
+<PRE>
+  ^.*abcd$
+</PRE>
+</P>
+<P>
+then the initial .* matches the entire string at first, but when this fails
+(because there is no following "a"), it backtracks to match all but the last
+character, then all but the last two characters, and so on. Once again the
+search for "a" covers the entire string, from right to left, so we are no
+better off. However, if the pattern is written as
+</P>
+<P>
+<PRE>
+  ^(?&#62;.*)(?&#60;=abcd)
+</PRE>
+</P>
+<P>
+then there can be no backtracking for the .* item; it can match only the entire
+string. The subsequent lookbehind assertion does a single test on the last four
+characters. If it fails, the match fails immediately. For long strings, this
+approach makes a significant difference to the processing time.
+</P>
+<P>
+When a pattern contains an unlimited repeat inside a subpattern that can itself
+be repeated an unlimited number of times, the use of a once-only subpattern is
+the only way to avoid some failing matches taking a very long time indeed.
+The pattern
+</P>
+<P>
+<PRE>
+  (\D+|&#60;\d+&#62;)*[!?]
+</PRE>
+</P>
+<P>
+matches an unlimited number of substrings that either consist of non-digits, or
+digits enclosed in &#60;&#62;, followed by either ! or ?. When it matches, it runs
+quickly. However, if it is applied to
+</P>
+<P>
+<PRE>
+  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
+</PRE>
+</P>
+<P>
+it takes a long time before reporting failure. This is because the string can
+be divided between the two repeats in a large number of ways, and all have to
+be tried. (The example used [!?] rather than a single character at the end,
+because both PCRE and Perl have an optimization that allows for fast failure
+when a single character is used. They remember the last single character that
+is required for a match, and fail early if it is not present in the string.)
+If the pattern is changed to
+</P>
+<P>
+<PRE>
+  ((?&#62;\D+)|&#60;\d+&#62;)*[!?]
+</PRE>
+</P>
+<P>
+sequences of non-digits cannot be broken, and failure happens quickly.
+</P>
+<LI><A NAME="SEC26" HREF="#TOC1">CONDITIONAL SUBPATTERNS</A>
+<P>
+It is possible to cause the matching process to obey a subpattern
+conditionally or to choose between two alternative subpatterns, depending on
+the result of an assertion, or whether a previous capturing subpattern matched
+or not. The two possible forms of conditional subpattern are
+</P>
+<P>
+<PRE>
+  (?(condition)yes-pattern)
+  (?(condition)yes-pattern|no-pattern)
+</PRE>
+</P>
+<P>
+If the condition is satisfied, the yes-pattern is used; otherwise the
+no-pattern (if present) is used. If there are more than two alternatives in the
+subpattern, a compile-time error occurs.
+</P>
+<P>
+There are two kinds of condition. If the text between the parentheses consists
+of a sequence of digits, then the condition is satisfied if the capturing
+subpattern of that number has previously matched. Consider the following
+pattern, which contains non-significant white space to make it more readable
+(assume the PCRE_EXTENDED option) and to divide it into three parts for ease
+of discussion:
+</P>
+<P>
+<PRE>
+  ( \( )?    [^()]+    (?(1) \) )
+</PRE>
+</P>
+<P>
+The first part matches an optional opening parenthesis, and if that
+character is present, sets it as the first captured substring. The second part
+matches one or more characters that are not parentheses. The third part is a
+conditional subpattern that tests whether the first set of parentheses matched
+or not. If they did, that is, if subject started with an opening parenthesis,
+the condition is true, and so the yes-pattern is executed and a closing
+parenthesis is required. Otherwise, since no-pattern is not present, the
+subpattern matches nothing. In other words, this pattern matches a sequence of
+non-parentheses, optionally enclosed in parentheses.
+</P>
+<P>
+If the condition is not a sequence of digits, it must be an assertion. This may
+be a positive or negative lookahead or lookbehind assertion. Consider this
+pattern, again containing non-significant white space, and with the two
+alternatives on the second line:
+</P>
+<P>
+<PRE>
+  (?(?=[^a-z]*[a-z])
+  \d{2}-[a-z]{3}-\d{2}  |  \d{2}-\d{2}-\d{2} )
+</PRE>
+</P>
+<P>
+The condition is a positive lookahead assertion that matches an optional
+sequence of non-letters followed by a letter. In other words, it tests for the
+presence of at least one letter in the subject. If a letter is found, the
+subject is matched against the first alternative; otherwise it is matched
+against the second. This pattern matches strings in one of the two forms
+dd-aaa-dd or dd-dd-dd, where aaa are letters and dd are digits.
+</P>
+<LI><A NAME="SEC27" HREF="#TOC1">COMMENTS</A>
+<P>
+The sequence (?# marks the start of a comment which continues up to the next
+closing parenthesis. Nested parentheses are not permitted. The characters
+that make up a comment play no part in the pattern matching at all.
+</P>
+<P>
+If the PCRE_EXTENDED option is set, an unescaped # character outside a
+character class introduces a comment that continues up to the next newline
+character in the pattern.
+</P>
+<LI><A NAME="SEC28" HREF="#TOC1">RECURSIVE PATTERNS</A>
+<P>
+Consider the problem of matching a string in parentheses, allowing for
+unlimited nested parentheses. Without the use of recursion, the best that can
+be done is to use a pattern that matches up to some fixed depth of nesting. It
+is not possible to handle an arbitrary nesting depth. Perl 5.6 has provided an
+experimental facility that allows regular expressions to recurse (amongst other
+things). It does this by interpolating Perl code in the expression at run time,
+and the code can refer to the expression itself. A Perl pattern to solve the
+parentheses problem can be created like this:
+</P>
+<P>
+<PRE>
+  $re = qr{\( (?: (?&#62;[^()]+) | (?p{$re}) )* \)}x;
+</PRE>
+</P>
+<P>
+The (?p{...}) item interpolates Perl code at run time, and in this case refers
+recursively to the pattern in which it appears. Obviously, PCRE cannot support
+the interpolation of Perl code. Instead, the special item (?R) is provided for
+the specific case of recursion. This PCRE pattern solves the parentheses
+problem (assume the PCRE_EXTENDED option is set so that white space is
+ignored):
+</P>
+<P>
+<PRE>
+  \( ( (?&#62;[^()]+) | (?R) )* \)
+</PRE>
+</P>
+<P>
+First it matches an opening parenthesis. Then it matches any number of
+substrings which can either be a sequence of non-parentheses, or a recursive
+match of the pattern itself (i.e. a correctly parenthesized substring). Finally
+there is a closing parenthesis.
+</P>
+<P>
+This particular example pattern contains nested unlimited repeats, and so the
+use of a once-only subpattern for matching strings of non-parentheses is
+important when applying the pattern to strings that do not match. For example,
+when it is applied to
+</P>
+<P>
+<PRE>
+  (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()
+</PRE>
+</P>
+<P>
+it yields "no match" quickly. However, if a once-only subpattern is not used,
+the match runs for a very long time indeed because there are so many different
+ways the + and * repeats can carve up the subject, and all have to be tested
+before failure can be reported.
+</P>
+<P>
+The values set for any capturing subpatterns are those from the outermost level
+of the recursion at which the subpattern value is set. If the pattern above is
+matched against
+</P>
+<P>
+<PRE>
+  (ab(cd)ef)
+</PRE>
+</P>
+<P>
+the value for the capturing parentheses is "ef", which is the last value taken
+on at the top level. If additional parentheses are added, giving
+</P>
+<P>
+<PRE>
+  \( ( ( (?&#62;[^()]+) | (?R) )* ) \)
+     ^                        ^
+     ^                        ^
+</PRE>
+then the string they capture is "ab(cd)ef", the contents of the top level
+parentheses. If there are more than 15 capturing parentheses in a pattern, PCRE
+has to obtain extra memory to store data during a recursion, which it does by
+using <B>pcre_malloc</B>, freeing it via <B>pcre_free</B> afterwards. If no
+memory can be obtained, it saves data for the first 15 capturing parentheses
+only, as there is no way to give an out-of-memory error from within a
+recursion.
+</P>
+<LI><A NAME="SEC29" HREF="#TOC1">PERFORMANCE</A>
+<P>
+Certain items that may appear in patterns are more efficient than others. It is
+more efficient to use a character class like [aeiou] than a set of alternatives
+such as (a|e|i|o|u). In general, the simplest construction that provides the
+required behaviour is usually the most efficient. Jeffrey Friedl's book
+contains a lot of discussion about optimizing regular expressions for efficient
+performance.
+</P>
+<P>
+When a pattern begins with .* and the PCRE_DOTALL option is set, the pattern is
+implicitly anchored by PCRE, since it can match only at the start of a subject
+string. However, if PCRE_DOTALL is not set, PCRE cannot make this optimization,
+because the . metacharacter does not then match a newline, and if the subject
+string contains newlines, the pattern may match from the character immediately
+following one of them instead of from the very start. For example, the pattern
+</P>
+<P>
+<PRE>
+  (.*) second
+</PRE>
+</P>
+<P>
+matches the subject "first\nand second" (where \n stands for a newline
+character) with the first captured substring being "and". In order to do this,
+PCRE has to retry the match starting after every newline in the subject.
+</P>
+<P>
+If you are using such a pattern with subject strings that do not contain
+newlines, the best performance is obtained by setting PCRE_DOTALL, or starting
+the pattern with ^.* to indicate explicit anchoring. That saves PCRE from
+having to scan along the subject looking for a newline to restart at.
+</P>
+<P>
+Beware of patterns that contain nested indefinite repeats. These can take a
+long time to run when applied to a string that does not match. Consider the
+pattern fragment
+</P>
+<P>
+<PRE>
+  (a+)*
+</PRE>
+</P>
+<P>
+This can match "aaaa" in 33 different ways, and this number increases very
+rapidly as the string gets longer. (The * repeat can match 0, 1, 2, 3, or 4
+times, and for each of those cases other than 0, the + repeats can match
+different numbers of times.) When the remainder of the pattern is such that the
+entire match is going to fail, PCRE has in principle to try every possible
+variation, and this can take an extremely long time.
+</P>
+<P>
+An optimization catches some of the more simple cases such as
+</P>
+<P>
+<PRE>
+  (a+)*b
+</PRE>
+</P>
+<P>
+where a literal character follows. Before embarking on the standard matching
+procedure, PCRE checks that there is a "b" later in the subject string, and if
+there is not, it fails the match immediately. However, when there is no
+following literal this optimization cannot be used. You can see the difference
+by comparing the behaviour of
+</P>
+<P>
+<PRE>
+  (a+)*\d
+</PRE>
+</P>
+<P>
+with the pattern above. The former gives a failure almost instantly when
+applied to a whole line of "a" characters, whereas the latter takes an
+appreciable time with strings longer than about 20 characters.
+</P>
+<LI><A NAME="SEC30" HREF="#TOC1">AUTHOR</A>
+<P>
+Philip Hazel &#60;ph10@cam.ac.uk&#62;
+<BR>
+University Computing Service,
+<BR>
+New Museums Site,
+<BR>
+Cambridge CB2 3QG, England.
+<BR>
+Phone: +44 1223 334714
+</P>
+<P>
+Last updated: 27 January 2000
+<BR>
+Copyright (c) 1997-2000 University of Cambridge.
diff --git a/srclib/pcre/doc/pcre.txt b/srclib/pcre/doc/pcre.txt
new file mode 100644
index 0000000000..f28ee99e8b
--- /dev/null
+++ b/srclib/pcre/doc/pcre.txt
@@ -0,0 +1,1978 @@
+NAME
+     pcre - Perl-compatible regular expressions.
+
+
+
+SYNOPSIS
+     #include <pcre.h>
+
+     pcre *pcre_compile(const char *pattern, int options,
+          const char **errptr, int *erroffset,
+          const unsigned char *tableptr);
+
+     pcre_extra *pcre_study(const pcre *code, int options,
+          const char **errptr);
+
+     int pcre_exec(const pcre *code, const pcre_extra *extra,
+          const char *subject, int length, int startoffset,
+          int options, int *ovector, int ovecsize);
+
+     int pcre_copy_substring(const char *subject, int *ovector,
+          int stringcount, int stringnumber, char *buffer,
+          int buffersize);
+
+     int pcre_get_substring(const char *subject, int *ovector,
+          int stringcount, int stringnumber,
+          const char **stringptr);
+
+     int pcre_get_substring_list(const char *subject,
+          int *ovector, int stringcount, const char ***listptr);
+
+     const unsigned char *pcre_maketables(void);
+
+     int pcre_fullinfo(const pcre *code, const pcre_extra *extra,
+          int what, void *where);
+
+     int pcre_info(const pcre *code, int *optptr, *firstcharptr);
+
+     char *pcre_version(void);
+
+     void *(*pcre_malloc)(size_t);
+
+     void (*pcre_free)(void *);
+
+
+
+
+DESCRIPTION
+     The PCRE library is a set of functions that implement  regu-
+     lar  expression  pattern  matching using the same syntax and
+     semantics as Perl  5,  with  just  a  few  differences  (see
+     below).  The  current  implementation  corresponds  to  Perl
+     5.005, with some additional features from the Perl  develop-
+     ment release.
+
+     PCRE has its own native API,  which  is  described  in  this
+     document.  There  is  also  a  set of wrapper functions that
+     correspond to the POSIX regular expression API.   These  are
+     described in the pcreposix documentation.
+
+     The native API function prototypes are defined in the header
+     file  pcre.h,  and  on  Unix  systems  the library itself is
+     called libpcre.a, so can be accessed by adding -lpcre to the
+     command  for  linking  an  application  which  calls it. The
+     header file defines the macros PCRE_MAJOR and PCRE_MINOR  to
+     contain the major and minor release numbers for the library.
+     Applications can use these to include support for  different
+     releases.
+
+     The functions pcre_compile(), pcre_study(), and  pcre_exec()
+     are  used  for  compiling  and matching regular expressions,
+     while   pcre_copy_substring(),   pcre_get_substring(),   and
+     pcre_get_substring_list()   are  convenience  functions  for
+     extracting  captured  substrings  from  a  matched   subject
+     string.  The function pcre_maketables() is used (optionally)
+     to build a set of character tables in the current locale for
+     passing to pcre_compile().
+
+     The function pcre_fullinfo() is used to find out information
+     about a compiled pattern; pcre_info() is an obsolete version
+     which returns only some of the available information, but is
+     retained   for   backwards   compatibility.    The  function
+     pcre_version() returns a pointer to a string containing  the
+     version of PCRE and its date of release.
+
+     The global variables  pcre_malloc  and  pcre_free  initially
+     contain the entry points of the standard malloc() and free()
+     functions respectively. PCRE  calls  the  memory  management
+     functions  via  these  variables,  so  a calling program can
+     replace them if it  wishes  to  intercept  the  calls.  This
+     should be done before calling any PCRE functions.
+
+
+
+MULTI-THREADING
+     The PCRE functions can be used in  multi-threading  applica-
+     tions, with the proviso that the memory management functions
+     pointed to by pcre_malloc and pcre_free are  shared  by  all
+     threads.
+
+     The compiled form of a regular  expression  is  not  altered
+     during  matching, so the same compiled pattern can safely be
+     used by several threads at once.
+
+
+
+
+COMPILING A PATTERN
+     The function pcre_compile() is called to compile  a  pattern
+     into  an internal form. The pattern is a C string terminated
+     by a binary zero, and is passed in the argument  pattern.  A
+     pointer  to  a  single  block of memory that is obtained via
+     pcre_malloc is returned. This contains the compiled code and
+     related data. The pcre type is defined for this for conveni-
+     ence, but in fact pcre is just a typedef for void, since the
+     contents  of  the block are not externally defined. It is up
+     to the caller to free  the  memory  when  it  is  no  longer
+     required.
+
+     The size of a compiled pattern is  roughly  proportional  to
+     the length of the pattern string, except that each character
+     class (other than those containing just a single  character,
+     negated  or  not)  requires 33 bytes, and repeat quantifiers
+     with a minimum greater than one or a bounded  maximum  cause
+     the  relevant  portions of the compiled pattern to be repli-
+     cated.
+
+     The options argument contains independent bits  that  affect
+     the  compilation.  It  should  be  zero  if  no  options are
+     required. Some of the options, in particular, those that are
+     compatible  with Perl, can also be set and unset from within
+     the pattern (see the detailed description of regular expres-
+     sions below). For these options, the contents of the options
+     argument specifies their initial settings at  the  start  of
+     compilation  and  execution. The PCRE_ANCHORED option can be
+     set at the time of matching as well as at compile time.
+
+     If errptr is NULL, pcre_compile() returns NULL  immediately.
+     Otherwise, if compilation of a pattern fails, pcre_compile()
+     returns NULL, and sets the variable pointed to by errptr  to
+     point  to a textual error message. The offset from the start
+     of  the  pattern  to  the  character  where  the  error  was
+     discovered   is   placed  in  the  variable  pointed  to  by
+     erroffset, which must not be NULL. If it  is,  an  immediate
+     error is given.
+
+     If the final  argument,  tableptr,  is  NULL,  PCRE  uses  a
+     default  set  of character tables which are built when it is
+     compiled, using the default C  locale.  Otherwise,  tableptr
+     must  be  the result of a call to pcre_maketables(). See the
+     section on locale support below.
+
+     The following option bits are defined in the header file:
+
+       PCRE_ANCHORED
+
+     If this bit is set, the pattern is forced to be  "anchored",
+     that is, it is constrained to match only at the start of the
+     string which is being searched (the "subject string").  This
+     effect can also be achieved by appropriate constructs in the
+     pattern itself, which is the only way to do it in Perl.
+
+       PCRE_CASELESS
+
+     If this bit is set, letters in the pattern match both  upper
+     and  lower  case  letters.  It  is  equivalent  to Perl's /i
+     option.
+
+       PCRE_DOLLAR_ENDONLY
+
+     If this bit is set, a dollar metacharacter  in  the  pattern
+     matches  only at the end of the subject string. Without this
+     option, a dollar also matches immediately before  the  final
+     character  if it is a newline (but not before any other new-
+     lines).  The  PCRE_DOLLAR_ENDONLY  option  is   ignored   if
+     PCRE_MULTILINE is set. There is no equivalent to this option
+     in Perl.
+
+       PCRE_DOTALL
+
+     If this bit is  set,  a  dot  metacharater  in  the  pattern
+     matches all characters, including newlines. Without it, new-
+     lines are excluded. This option is equivalent to  Perl's  /s
+     option.  A negative class such as [^a] always matches a new-
+     line character, independent of the setting of this option.
+
+       PCRE_EXTENDED
+
+     If this bit is set, whitespace data characters in  the  pat-
+     tern  are  totally  ignored  except when escaped or inside a
+     character class, and characters between an unescaped #  out-
+     side  a  character  class  and  the  next newline character,
+     inclusive, are also ignored. This is equivalent to Perl's /x
+     option,  and  makes  it  possible to include comments inside
+     complicated patterns. Note, however, that this applies  only
+     to  data  characters. Whitespace characters may never appear
+     within special character sequences in a pattern, for example
+     within  the sequence (?( which introduces a conditional sub-
+     pattern.
+
+       PCRE_EXTRA
+
+     This option was invented in  order  to  turn  on  additional
+     functionality of PCRE that is incompatible with Perl, but it
+     is currently of very little use. When set, any backslash  in
+     a  pattern  that is followed by a letter that has no special
+     meaning causes an error, thus reserving  these  combinations
+     for  future  expansion.  By default, as in Perl, a backslash
+     followed by a letter with no special meaning is treated as a
+     literal.  There  are at present no other features controlled
+     by this option. It can also be set by a (?X) option  setting
+     within a pattern.
+
+       PCRE_MULTILINE
+
+     By default, PCRE treats the subject string as consisting  of
+     a  single "line" of characters (even if it actually contains
+     several newlines). The "start  of  line"  metacharacter  (^)
+     matches  only  at the start of the string, while the "end of
+     line" metacharacter ($) matches  only  at  the  end  of  the
+     string,    or   before   a   terminating   newline   (unless
+     PCRE_DOLLAR_ENDONLY is set). This is the same as Perl.
+
+     When PCRE_MULTILINE it is set, the "start of line" and  "end
+     of  line"  constructs match immediately following or immedi-
+     ately before any newline  in  the  subject  string,  respec-
+     tively,  as  well  as  at  the  very  start and end. This is
+     equivalent to Perl's /m option. If there are no "\n" charac-
+     ters  in  a subject string, or no occurrences of ^ or $ in a
+     pattern, setting PCRE_MULTILINE has no effect.
+
+       PCRE_UNGREEDY
+
+     This option inverts the "greediness" of the  quantifiers  so
+     that  they  are  not greedy by default, but become greedy if
+     followed by "?". It is not compatible with Perl. It can also
+     be set by a (?U) option setting within the pattern.
+
+
+
+STUDYING A PATTERN
+     When a pattern is going to be  used  several  times,  it  is
+     worth  spending  more time analyzing it in order to speed up
+     the time taken for matching. The function pcre_study() takes
+     a  pointer  to a compiled pattern as its first argument, and
+     returns a  pointer  to  a  pcre_extra  block  (another  void
+     typedef)  containing  additional  information about the pat-
+     tern; this can be passed to pcre_exec().  If  no  additional
+     information is available, NULL is returned.
+
+     The second argument contains option  bits.  At  present,  no
+     options  are  defined  for  pcre_study(),  and this argument
+     should always be zero.
+
+     The third argument for pcre_study() is a pointer to an error
+     message. If studying succeeds (even if no data is returned),
+     the variable it points to  is  set  to  NULL.  Otherwise  it
+     points to a textual error message.
+
+     At present, studying a  pattern  is  useful  only  for  non-
+     anchored  patterns  that do not have a single fixed starting
+     character. A  bitmap  of  possible  starting  characters  is
+     created.
+
+
+
+LOCALE SUPPORT
+     PCRE handles caseless matching, and determines whether char-
+     acters  are  letters, digits, or whatever, by reference to a
+     set of tables. The library contains a default set of  tables
+     which  is  created in the default C locale when PCRE is com-
+     piled.  This  is   used   when   the   final   argument   of
+     pcre_compile()  is NULL, and is sufficient for many applica-
+     tions.
+
+     An alternative set of tables can, however, be supplied. Such
+     tables  are built by calling the pcre_maketables() function,
+     which has no arguments, in the relevant locale.  The  result
+     can  then be passed to pcre_compile() as often as necessary.
+     For example, to build and use tables  that  are  appropriate
+     for  the French locale (where accented characters with codes
+     greater than 128 are treated as letters), the following code
+     could be used:
+
+       setlocale(LC_CTYPE, "fr");
+       tables = pcre_maketables();
+       re = pcre_compile(..., tables);
+
+     The  tables  are  built  in  memory  that  is  obtained  via
+     pcre_malloc.  The  pointer that is passed to pcre_compile is
+     saved with the compiled pattern, and  the  same  tables  are
+     used  via this pointer by pcre_study() and pcre_exec(). Thus
+     for any single pattern, compilation, studying  and  matching
+     all happen in the same locale, but different patterns can be
+     compiled in different locales. It is the caller's  responsi-
+     bility  to  ensure  that  the  memory  containing the tables
+     remains available for as long as it is needed.
+
+
+
+INFORMATION ABOUT A PATTERN
+     The pcre_fullinfo() function  returns  information  about  a
+     compiled pattern. It replaces the obsolete pcre_info() func-
+     tion, which is nevertheless retained for backwards compabil-
+     ity (and is documented below).
+
+     The first argument for pcre_fullinfo() is a pointer  to  the
+     compiled  pattern.  The  second  argument  is  the result of
+     pcre_study(), or NULL if the pattern was  not  studied.  The
+     third  argument  specifies  which  piece  of  information is
+     required, while the fourth argument is a pointer to a  vari-
+     able  to receive the data. The yield of the function is zero
+     for success, or one of the following negative numbers:
+
+       PCRE_ERROR_NULL       the argument code was NULL
+                             the argument where was NULL
+       PCRE_ERROR_BADMAGIC   the "magic number" was not found
+       PCRE_ERROR_BADOPTION  the value of what was invalid
+
+     The possible values for the third argument  are  defined  in
+     pcre.h, and are as follows:
+
+       PCRE_INFO_OPTIONS
+
+     Return a copy of the options with which the pattern was com-
+     piled.  The fourth argument should point to au unsigned long
+     int variable. These option bits are those specified  in  the
+     call  to  pcre_compile(),  modified  by any top-level option
+     settings  within  the   pattern   itself,   and   with   the
+     PCRE_ANCHORED  bit  forcibly  set if the form of the pattern
+     implies that it can match only at the  start  of  a  subject
+     string.
+
+       PCRE_INFO_SIZE
+
+     Return the size of the compiled pattern, that is, the  value
+     that  was  passed as the argument to pcre_malloc() when PCRE
+     was getting memory in which to place the compiled data.  The
+     fourth argument should point to a size_t variable.
+
+       PCRE_INFO_CAPTURECOUNT
+
+     Return the number of capturing subpatterns in  the  pattern.
+     The fourth argument should point to an int variable.
+
+       PCRE_INFO_BACKREFMAX
+
+     Return the number of the highest back reference in the  pat-
+     tern.  The  fourth argument should point to an int variable.
+     Zero is returned if there are no back references.
+
+       PCRE_INFO_FIRSTCHAR
+
+     Return information about the first character of any  matched
+     string,  for  a  non-anchored  pattern.  If there is a fixed
+     first   character,   e.g.   from   a   pattern    such    as
+     (cat|cow|coyote), then it is returned in the integer pointed
+     to by where. Otherwise, if either
+
+     (a) the pattern was compiled with the PCRE_MULTILINE option,
+     and every branch starts with "^", or
+
+     (b) every  branch  of  the  pattern  starts  with  ".*"  and
+     PCRE_DOTALL is not set (if it were set, the pattern would be
+     anchored),
+
+     then -1 is returned, indicating  that  the  pattern  matches
+     only  at  the  start  of  a subject string or after any "\n"
+     within the string. Otherwise -2 is  returned.  For  anchored
+     patterns, -2 is returned.
+
+       PCRE_INFO_FIRSTTABLE
+
+     If the pattern was studied, and this resulted  in  the  con-
+     struction of a 256-bit table indicating a fixed set of char-
+     acters for the first character in  any  matching  string,  a
+     pointer   to  the  table  is  returned.  Otherwise  NULL  is
+     returned. The fourth argument should point  to  an  unsigned
+     char * variable.
+
+       PCRE_INFO_LASTLITERAL
+
+     For a non-anchored pattern, return the value of  the  right-
+     most  literal  character  which  must  exist  in any matched
+     string, other than at its start. The fourth argument  should
+     point  to an int variable. If there is no such character, or
+     if the pattern is anchored, -1 is returned. For example, for
+     the pattern /a\d+z\d+/ the returned value is 'z'.
+
+     The pcre_info() function is now obsolete because its  inter-
+     face  is  too  restrictive  to return all the available data
+     about  a  compiled  pattern.   New   programs   should   use
+     pcre_fullinfo()  instead.  The  yield  of pcre_info() is the
+     number of capturing subpatterns, or  one  of  the  following
+     negative numbers:
+
+       PCRE_ERROR_NULL       the argument code was NULL
+       PCRE_ERROR_BADMAGIC   the "magic number" was not found
+
+     If the optptr argument is not NULL, a copy  of  the  options
+     with which the pattern was compiled is placed in the integer
+     it points to (see PCRE_INFO_OPTIONS above).
+
+     If the pattern is not anchored and the firstcharptr argument
+     is  not  NULL, it is used to pass back information about the
+     first    character    of    any    matched    string    (see
+     PCRE_INFO_FIRSTCHAR above).
+
+
+
+MATCHING A PATTERN
+     The function pcre_exec() is called to match a subject string
+     against  a pre-compiled pattern, which is passed in the code
+     argument. If the pattern has been studied, the result of the
+     study should be passed in the extra argument. Otherwise this
+     must be NULL.
+
+     The PCRE_ANCHORED option can be passed in the options  argu-
+     ment,  whose unused bits must be zero. However, if a pattern
+     was  compiled  with  PCRE_ANCHORED,  or  turned  out  to  be
+     anchored  by  virtue  of  its  contents,  it  cannot be made
+     unachored at matching time.
+
+     There are also three further options that can be set only at
+     matching time:
+
+       PCRE_NOTBOL
+
+     The first character of the string is not the beginning of  a
+     line,  so  the  circumflex  metacharacter  should  not match
+     before it. Setting this without PCRE_MULTILINE  (at  compile
+     time) causes circumflex never to match.
+
+       PCRE_NOTEOL
+
+     The end of the string is not the end of a line, so the  dol-
+     lar  metacharacter should not match it nor (except in multi-
+     line mode) a newline immediately  before  it.  Setting  this
+     without PCRE_MULTILINE (at compile time) causes dollar never
+     to match.
+
+       PCRE_NOTEMPTY
+
+     An empty string is not considered to be  a  valid  match  if
+     this  option  is  set. If there are alternatives in the pat-
+     tern, they are tried. If  all  the  alternatives  match  the
+     empty  string,  the  entire match fails. For example, if the
+     pattern
+
+       a?b?
+
+     is applied to a string not beginning with  "a"  or  "b",  it
+     matches  the  empty string at the start of the subject. With
+     PCRE_NOTEMPTY set, this match is not valid, so PCRE searches
+     further into the string for occurrences of "a" or "b".
+
+     Perl has no direct equivalent of PCRE_NOTEMPTY, but it  does
+     make  a  special case of a pattern match of the empty string
+     within its split() function, and when using the /g modifier.
+     It  is possible to emulate Perl's behaviour after matching a
+     null string by first trying the  match  again  at  the  same
+     offset  with  PCRE_NOTEMPTY  set,  and then if that fails by
+     advancing the starting offset  (see  below)  and  trying  an
+     ordinary match again.
+
+     The subject string is passed as  a  pointer  in  subject,  a
+     length  in  length,  and  a  starting offset in startoffset.
+     Unlike the pattern string, it may contain binary zero  char-
+     acters.  When  the starting offset is zero, the search for a
+     match starts at the beginning of the subject, and this is by
+     far the most common case.
+
+     A non-zero starting offset  is  useful  when  searching  for
+     another  match  in  the  same subject by calling pcre_exec()
+     again after a previous success.  Setting startoffset differs
+     from  just  passing  over  a  shortened  string  and setting
+     PCRE_NOTBOL in the case of a pattern that  begins  with  any
+     kind of lookbehind. For example, consider the pattern
+
+       \Biss\B
+
+     which finds occurrences of "iss" in the middle of words. (\B
+     matches only if the current position in the subject is not a
+     word boundary.) When applied to the string "Mississipi"  the
+     first  call  to  pcre_exec()  finds the first occurrence. If
+     pcre_exec() is called again with just the remainder  of  the
+     subject,  namely  "issipi", it does not match, because \B is
+     always false at the start of the subject, which is deemed to
+     be  a  word  boundary. However, if pcre_exec() is passed the
+     entire string again, but with startoffset set to 4, it finds
+     the  second  occurrence  of "iss" because it is able to look
+     behind the starting point to discover that it is preceded by
+     a letter.
+
+     If a non-zero starting offset is passed when the pattern  is
+     anchored, one attempt to match at the given offset is tried.
+     This can only succeed if the pattern does  not  require  the
+     match to be at the start of the subject.
+
+     In general, a pattern matches a certain portion of the  sub-
+     ject,  and  in addition, further substrings from the subject
+     may be picked out by parts of  the  pattern.  Following  the
+     usage  in  Jeffrey Friedl's book, this is called "capturing"
+     in what follows, and the phrase  "capturing  subpattern"  is
+     used for a fragment of a pattern that picks out a substring.
+     PCRE supports several other kinds of  parenthesized  subpat-
+     tern that do not cause substrings to be captured.
+
+     Captured substrings are returned to the caller via a  vector
+     of  integer  offsets whose address is passed in ovector. The
+     number of elements in the vector is passed in ovecsize.  The
+     first two-thirds of the vector is used to pass back captured
+     substrings, each substring using a  pair  of  integers.  The
+     remaining  third  of  the  vector  is  used  as workspace by
+     pcre_exec() while matching capturing subpatterns, and is not
+     available for passing back information. The length passed in
+     ovecsize should always be a multiple of three. If it is not,
+     it is rounded down.
+
+     When a match has been successful, information about captured
+     substrings is returned in pairs of integers, starting at the
+     beginning of ovector, and continuing up to two-thirds of its
+     length  at  the  most. The first element of a pair is set to
+     the offset of the first character in a  substring,  and  the
+     second is set to the offset of the first character after the
+     end of a substring. The first  pair,  ovector[0]  and  ovec-
+     tor[1],  identify  the portion of the subject string matched
+     by the entire pattern. The next pair is used for  the  first
+     capturing  subpattern,  and  so  on.  The  value returned by
+     pcre_exec() is the number of pairs that have  been  set.  If
+     there  are no capturing subpatterns, the return value from a
+     successful match is 1, indicating that just the  first  pair
+     of offsets has been set.
+
+     Some convenience functions are provided for  extracting  the
+     captured substrings as separate strings. These are described
+     in the following section.
+
+     It is possible for an capturing  subpattern  number  n+1  to
+     match  some  part  of  the subject when subpattern n has not
+     been used at all.  For  example,  if  the  string  "abc"  is
+     matched  against the pattern (a|(z))(bc) subpatterns 1 and 3
+     are matched, but 2 is not. When this  happens,  both  offset
+     values corresponding to the unused subpattern are set to -1.
+
+     If a capturing subpattern is matched repeatedly, it  is  the
+     last  portion  of  the  string  that  it  matched  that gets
+     returned.
+
+     If the vector is too small to hold  all  the  captured  sub-
+     strings,  it is used as far as possible (up to two-thirds of
+     its length), and the function returns a value  of  zero.  In
+     particular,  if  the  substring offsets are not of interest,
+     pcre_exec() may be called with ovector passed  as  NULL  and
+     ovecsize  as  zero.  However,  if  the pattern contains back
+     references and the ovector isn't big enough to remember  the
+     related  substrings,  PCRE  has to get additional memory for
+     use during matching. Thus it is usually advisable to  supply
+     an ovector.
+
+     Note that pcre_info() can be used to find out how many  cap-
+     turing  subpatterns  there  are  in  a compiled pattern. The
+     smallest size for ovector that will  allow  for  n  captured
+     substrings  in  addition  to  the  offsets  of the substring
+     matched by the whole pattern is (n+1)*3.
+
+     If pcre_exec() fails, it returns a negative number. The fol-
+     lowing are defined in the header file:
+
+       PCRE_ERROR_NOMATCH        (-1)
+
+     The subject string did not match the pattern.
+
+       PCRE_ERROR_NULL           (-2)
+
+     Either code or subject was passed as NULL,  or  ovector  was
+     NULL and ovecsize was not zero.
+
+       PCRE_ERROR_BADOPTION      (-3)
+
+     An unrecognized bit was set in the options argument.
+
+       PCRE_ERROR_BADMAGIC       (-4)
+
+     PCRE stores a 4-byte "magic number" at the start of the com-
+     piled  code,  to  catch  the  case  when it is passed a junk
+     pointer. This is the error it gives when  the  magic  number
+     isn't present.
+
+       PCRE_ERROR_UNKNOWN_NODE   (-5)
+
+     While running the pattern match, an unknown item was encoun-
+     tered in the compiled pattern. This error could be caused by
+     a bug in PCRE or by overwriting of the compiled pattern.
+
+       PCRE_ERROR_NOMEMORY       (-6)
+
+     If a pattern contains back references, but the ovector  that
+     is  passed  to pcre_exec() is not big enough to remember the
+     referenced substrings, PCRE gets a block of  memory  at  the
+     start  of  matching to use for this purpose. If the call via
+     pcre_malloc() fails, this error  is  given.  The  memory  is
+     freed at the end of matching.
+
+
+
+EXTRACTING CAPTURED SUBSTRINGS
+     Captured substrings can be accessed directly  by  using  the
+     offsets returned by pcre_exec() in ovector. For convenience,
+     the functions  pcre_copy_substring(),  pcre_get_substring(),
+     and  pcre_get_substring_list()  are  provided for extracting
+     captured  substrings  as  new,   separate,   zero-terminated
+     strings.   A  substring  that  contains  a  binary  zero  is
+     correctly extracted and has a further zero added on the end,
+     but the result does not, of course, function as a C string.
+
+     The first three arguments are the same for all  three  func-
+     tions:  subject  is  the  subject string which has just been
+     successfully matched, ovector is a pointer to the vector  of
+     integer   offsets   that  was  passed  to  pcre_exec(),  and
+     stringcount is the number of substrings that  were  captured
+     by  the  match,  including  the  substring  that matched the
+     entire regular expression. This is  the  value  returned  by
+     pcre_exec  if  it  is  greater  than  zero.  If  pcre_exec()
+     returned zero, indicating that it ran out of space in  ovec-
+     tor, then the value passed as stringcount should be the size
+     of the vector divided by three.
+
+     The functions pcre_copy_substring() and pcre_get_substring()
+     extract a single substring, whose number is given as string-
+     number. A value of zero extracts the substring that  matched
+     the entire pattern, while higher values extract the captured
+     substrings. For pcre_copy_substring(), the string is  placed
+     in  buffer,  whose  length is given by buffersize, while for
+     pcre_get_substring() a new block of store  is  obtained  via
+     pcre_malloc,  and its address is returned via stringptr. The
+     yield of the function is  the  length  of  the  string,  not
+     including the terminating zero, or one of
+
+       PCRE_ERROR_NOMEMORY       (-6)
+
+     The buffer was too small for pcre_copy_substring(),  or  the
+     attempt to get memory failed for pcre_get_substring().
+
+       PCRE_ERROR_NOSUBSTRING    (-7)
+
+     There is no substring whose number is stringnumber.
+
+     The pcre_get_substring_list() function extracts  all  avail-
+     able  substrings  and builds a list of pointers to them. All
+     this is done in a single block of memory which  is  obtained
+     via pcre_malloc. The address of the memory block is returned
+     via listptr, which is also the start of the list  of  string
+     pointers.  The  end of the list is marked by a NULL pointer.
+     The yield of the function is zero if all went well, or
+
+       PCRE_ERROR_NOMEMORY       (-6)
+
+     if the attempt to get the memory block failed.
+
+     When any of these functions encounter a  substring  that  is
+     unset, which can happen when capturing subpattern number n+1
+     matches some part of the subject, but subpattern n  has  not
+     been  used  at all, they return an empty string. This can be
+     distinguished  from  a  genuine  zero-length  substring   by
+     inspecting the appropriate offset in ovector, which is nega-
+     tive for unset substrings.
+
+
+
+
+LIMITATIONS
+     There are some size limitations in PCRE but it is hoped that
+     they will never in practice be relevant.  The maximum length
+     of a compiled pattern is 65539 (sic) bytes.  All  values  in
+     repeating  quantifiers must be less than 65536.  The maximum
+     number of capturing subpatterns is 99.  The  maximum  number
+     of  all  parenthesized subpatterns, including capturing sub-
+     patterns, assertions, and other types of subpattern, is 200.
+
+     The maximum length of a subject string is the largest  posi-
+     tive number that an integer variable can hold. However, PCRE
+     uses recursion to handle subpatterns and indefinite  repeti-
+     tion.  This  means  that the available stack space may limit
+     the size of a subject string that can be processed  by  cer-
+     tain patterns.
+
+
+
+DIFFERENCES FROM PERL
+     The differences described here  are  with  respect  to  Perl
+     5.005.
+
+     1. By default, a whitespace character is any character  that
+     the  C  library  function isspace() recognizes, though it is
+     possible to compile PCRE  with  alternative  character  type
+     tables. Normally isspace() matches space, formfeed, newline,
+     carriage return, horizontal tab, and vertical tab. Perl 5 no
+     longer  includes vertical tab in its set of whitespace char-
+     acters. The \v escape that was in the Perl documentation for
+     a long time was never in fact recognized. However, the char-
+     acter itself was treated as whitespace at least up to 5.002.
+     In 5.004 and 5.005 it does not match \s.
+
+     2. PCRE does  not  allow  repeat  quantifiers  on  lookahead
+     assertions. Perl permits them, but they do not mean what you
+     might think. For example, (?!a){3} does not assert that  the
+     next  three characters are not "a". It just asserts that the
+     next character is not "a" three times.
+
+     3. Capturing subpatterns that occur inside  negative  looka-
+     head  assertions  are  counted,  but  their  entries  in the
+     offsets vector are never set. Perl sets its numerical  vari-
+     ables  from  any  such  patterns that are matched before the
+     assertion fails to match something (thereby succeeding), but
+     only  if  the negative lookahead assertion contains just one
+     branch.
+
+     4. Though binary zero characters are supported in  the  sub-
+     ject  string,  they  are  not  allowed  in  a pattern string
+     because it is passed as a normal  C  string,  terminated  by
+     zero. The escape sequence "\0" can be used in the pattern to
+     represent a binary zero.
+
+     5. The following Perl escape sequences  are  not  supported:
+     \l,  \u,  \L,  \U,  \E, \Q. In fact these are implemented by
+     Perl's general string-handling and are not part of its  pat-
+     tern matching engine.
+
+     6. The Perl \G assertion is  not  supported  as  it  is  not
+     relevant to single pattern matches.
+
+     7. Fairly obviously, PCRE does not support the (?{code}) and
+     (?p{code})  constructions. However, there is some experimen-
+     tal support for recursive patterns using the  non-Perl  item
+     (?R).
+     8. There are at the time of writing some  oddities  in  Perl
+     5.005_02  concerned  with  the  settings of captured strings
+     when part of a pattern is repeated.  For  example,  matching
+     "aba"  against the pattern /^(a(b)?)+$/ sets $2 to the value
+     "b", but matching "aabbaa" against /^(aa(bb)?)+$/ leaves  $2
+     unset.    However,    if   the   pattern   is   changed   to
+     /^(aa(b(b))?)+$/ then $2 (and $3) get set.
+
+     In Perl 5.004 $2 is set in both cases, and that is also true
+     of PCRE. If in the future Perl changes to a consistent state
+     that is different, PCRE may change to follow.
+
+     9. Another as yet unresolved discrepancy  is  that  in  Perl
+     5.005_02  the  pattern /^(a)?(?(1)a|b)+$/ matches the string
+     "a", whereas in PCRE it does not.  However, in both Perl and
+     PCRE /^(a)?a/ matched against "a" leaves $1 unset.
+
+     10. PCRE  provides  some  extensions  to  the  Perl  regular
+     expression facilities:
+
+     (a) Although lookbehind assertions must match  fixed  length
+     strings,  each  alternative branch of a lookbehind assertion
+     can match a different length of string. Perl 5.005  requires
+     them all to have the same length.
+
+     (b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is  not
+     set,  the  $ meta- character matches only at the very end of
+     the string.
+
+     (c) If PCRE_EXTRA is set, a backslash followed by  a  letter
+     with no special meaning is faulted.
+
+     (d) If PCRE_UNGREEDY is set, the greediness of  the  repeti-
+     tion  quantifiers  is inverted, that is, by default they are
+     not greedy, but if followed by a question mark they are.
+
+     (e) PCRE_ANCHORED can be used to force a pattern to be tried
+     only at the start of the subject.
+
+     (f) The PCRE_NOTBOL, PCRE_NOTEOL, and PCRE_NOTEMPTY  options
+     for pcre_exec() have no Perl equivalents.
+
+     (g) The (?R) construct allows for recursive pattern matching
+     (Perl  5.6 can do this using the (?p{code}) construct, which
+     PCRE cannot of course support.)
+
+
+
+REGULAR EXPRESSION DETAILS
+     The syntax and semantics of  the  regular  expressions  sup-
+     ported  by PCRE are described below. Regular expressions are
+     also described in the Perl documentation and in a number  of
+
+     other  books,  some  of which have copious examples. Jeffrey
+     Friedl's  "Mastering  Regular  Expressions",  published   by
+     O'Reilly  (ISBN  1-56592-257),  covers them in great detail.
+     The description here is intended as reference documentation.
+
+     A regular expression is a pattern that is matched against  a
+     subject string from left to right. Most characters stand for
+     themselves in a pattern, and match the corresponding charac-
+     ters in the subject. As a trivial example, the pattern
+
+       The quick brown fox
+
+     matches a portion of a subject string that is  identical  to
+     itself.  The  power  of  regular  expressions comes from the
+     ability to include alternatives and repetitions in the  pat-
+     tern.  These  are encoded in the pattern by the use of meta-
+     characters, which do not stand for  themselves  but  instead
+     are interpreted in some special way.
+
+     There are two different sets of meta-characters: those  that
+     are  recognized anywhere in the pattern except within square
+     brackets, and those that are recognized in square  brackets.
+     Outside square brackets, the meta-characters are as follows:
+
+       \      general escape character with several uses
+       ^      assert start of  subject  (or  line,  in  multiline
+     mode)
+       $      assert end of subject (or line, in multiline mode)
+       .      match any character except newline (by default)
+       [      start character class definition
+       |      start of alternative branch
+       (      start subpattern
+       )      end subpattern
+       ?      extends the meaning of (
+              also 0 or 1 quantifier
+              also quantifier minimizer
+       *      0 or more quantifier
+       +      1 or more quantifier
+       {      start min/max quantifier
+
+     Part of a pattern that is in square  brackets  is  called  a
+     "character  class".  In  a  character  class  the only meta-
+     characters are:
+
+       \      general escape character
+       ^      negate the class, but only if the first character
+       -      indicates character range
+       ]      terminates the character class
+
+     The following sections describe  the  use  of  each  of  the
+     meta-characters.
+
+
+
+BACKSLASH
+     The backslash character has several uses. Firstly, if it  is
+     followed  by  a  non-alphameric character, it takes away any
+     special  meaning  that  character  may  have.  This  use  of
+     backslash  as  an  escape  character applies both inside and
+     outside character classes.
+
+     For example, if you want to match a "*" character, you write
+     "\*" in the pattern. This applies whether or not the follow-
+     ing character would otherwise  be  interpreted  as  a  meta-
+     character,  so it is always safe to precede a non-alphameric
+     with "\" to specify that it stands for itself.  In  particu-
+     lar, if you want to match a backslash, you write "\\".
+
+     If a pattern is compiled with the PCRE_EXTENDED option, whi-
+     tespace in the pattern (other than in a character class) and
+     characters between a "#" outside a character class  and  the
+     next  newline  character  are ignored. An escaping backslash
+     can be used to include a whitespace or "#" character as part
+     of the pattern.
+
+     A second use of backslash provides a way  of  encoding  non-
+     printing  characters  in patterns in a visible manner. There
+     is no restriction on the appearance of non-printing  charac-
+     ters,  apart from the binary zero that terminates a pattern,
+     but when a pattern is being prepared by text editing, it  is
+     usually  easier to use one of the following escape sequences
+     than the binary character it represents:
+
+       \a     alarm, that is, the BEL character (hex 07)
+       \cx    "control-x", where x is any character
+       \e     escape (hex 1B)
+       \f     formfeed (hex 0C)
+       \n     newline (hex 0A)
+       \r     carriage return (hex 0D)
+       \t     tab (hex 09)
+       \xhh   character with hex code hh
+       \ddd   character with octal code ddd, or backreference
+
+     The precise effect of "\cx" is as follows: if "x" is a lower
+     case  letter,  it  is converted to upper case. Then bit 6 of
+     the character (hex 40) is inverted.  Thus "\cz" becomes  hex
+     1A, but "\c{" becomes hex 3B, while "\c;" becomes hex 7B.
+
+     After "\x", up to two hexadecimal digits are  read  (letters
+     can be in upper or lower case).
+
+     After "\0" up to two further octal digits are read. In  both
+     cases,  if  there are fewer than two digits, just those that
+     are present are used. Thus the sequence "\0\x\07"  specifies
+     two binary zeros followed by a BEL character.  Make sure you
+     supply two digits after the initial zero  if  the  character
+     that follows is itself an octal digit.
+
+     The handling of a backslash followed by a digit other than 0
+     is  complicated.   Outside  a character class, PCRE reads it
+     and any following digits as a decimal number. If the  number
+     is  less  than  10, or if there have been at least that many
+     previous capturing left parentheses in the  expression,  the
+     entire  sequence is taken as a back reference. A description
+     of how this works is given later, following  the  discussion
+     of parenthesized subpatterns.
+
+     Inside a character  class,  or  if  the  decimal  number  is
+     greater  than  9 and there have not been that many capturing
+     subpatterns, PCRE re-reads up to three octal digits  follow-
+     ing  the  backslash,  and  generates  a single byte from the
+     least significant 8 bits of the value. Any subsequent digits
+     stand for themselves.  For example:
+
+       \040   is another way of writing a space
+       \40    is the same, provided there are fewer than 40
+                 previous capturing subpatterns
+       \7     is always a back reference
+       \11    might be a back reference, or another way of
+                 writing a tab
+       \011   is always a tab
+       \0113  is a tab followed by the character "3"
+       \113   is the character with octal code 113 (since there
+                 can be no more than 99 back references)
+       \377   is a byte consisting entirely of 1 bits
+       \81    is either a back reference, or a binary zero
+                 followed by the two characters "8" and "1"
+
+     Note that octal values of 100 or greater must not be  intro-
+     duced  by  a  leading zero, because no more than three octal
+     digits are ever read.
+
+     All the sequences that define a single  byte  value  can  be
+     used both inside and outside character classes. In addition,
+     inside a character class, the sequence "\b"  is  interpreted
+     as  the  backspace  character  (hex 08). Outside a character
+     class it has a different meaning (see below).
+
+     The third use of backslash is for specifying generic charac-
+     ter types:
+
+       \d     any decimal digit
+       \D     any character that is not a decimal digit
+       \s     any whitespace character
+       \S     any character that is not a whitespace character
+       \w     any "word" character
+       \W     any "non-word" character
+
+     Each pair of escape sequences partitions the complete set of
+     characters  into  two  disjoint  sets.  Any  given character
+     matches one, and only one, of each pair.
+
+     A "word" character is any letter or digit or the  underscore
+     character,  that  is,  any  character which can be part of a
+     Perl "word". The definition of letters and  digits  is  con-
+     trolled  by PCRE's character tables, and may vary if locale-
+     specific matching is  taking  place  (see  "Locale  support"
+     above). For example, in the "fr" (French) locale, some char-
+     acter codes greater than 128 are used for accented  letters,
+     and these are matched by \w.
+
+     These character type sequences can appear  both  inside  and
+     outside  character classes. They each match one character of
+     the appropriate type. If the current matching  point  is  at
+     the end of the subject string, all of them fail, since there
+     is no character to match.
+
+     The fourth use of backslash is  for  certain  simple  asser-
+     tions. An assertion specifies a condition that has to be met
+     at a particular point in  a  match,  without  consuming  any
+     characters  from  the subject string. The use of subpatterns
+     for more complicated  assertions  is  described  below.  The
+     backslashed assertions are
+
+       \b     word boundary
+       \B     not a word boundary
+       \A     start of subject (independent of multiline mode)
+       \Z     end of subject or newline at  end  (independent  of
+     multiline mode)
+       \z     end of subject (independent of multiline mode)
+
+     These assertions may not appear in  character  classes  (but
+     note that "\b" has a different meaning, namely the backspace
+     character, inside a character class).
+
+     A word boundary is a position in the  subject  string  where
+     the current character and the previous character do not both
+     match \w or \W (i.e. one matches \w and  the  other  matches
+     \W),  or the start or end of the string if the first or last
+     character matches \w, respectively.
+
+     The \A, \Z, and \z assertions differ  from  the  traditional
+     circumflex  and  dollar  (described below) in that they only
+     ever match at the very start and end of the subject  string,
+     whatever  options  are  set.  They  are  not affected by the
+     PCRE_NOTBOL or PCRE_NOTEOL options. If the startoffset argu-
+     ment  of  pcre_exec()  is  non-zero, \A can never match. The
+     difference between \Z and \z is that  \Z  matches  before  a
+     newline  that is the last character of the string as well as
+     at the end of the string, whereas \z  matches  only  at  the
+     end.
+
+
+
+CIRCUMFLEX AND DOLLAR
+     Outside a character class, in the default matching mode, the
+     circumflex  character  is an assertion which is true only if
+     the current matching point is at the start  of  the  subject
+     string.  If  the startoffset argument of pcre_exec() is non-
+     zero, circumflex can never match. Inside a character  class,
+     circumflex has an entirely different meaning (see below).
+
+     Circumflex need not be the first character of the pattern if
+     a  number of alternatives are involved, but it should be the
+     first thing in each alternative in which it appears  if  the
+     pattern is ever to match that branch. If all possible alter-
+     natives start with a circumflex, that is, if the pattern  is
+     constrained to match only at the start of the subject, it is
+     said to be an "anchored" pattern. (There are also other con-
+     structs that can cause a pattern to be anchored.)
+
+     A dollar character is an assertion which is true only if the
+     current  matching point is at the end of the subject string,
+     or immediately before a newline character that is  the  last
+     character in the string (by default). Dollar need not be the
+     last character of the pattern if a  number  of  alternatives
+     are  involved,  but it should be the last item in any branch
+     in which it appears.  Dollar has no  special  meaning  in  a
+     character class.
+
+     The meaning of dollar can be changed so that it matches only
+     at   the   very   end   of   the   string,  by  setting  the
+     PCRE_DOLLAR_ENDONLY option at compile or matching time. This
+     does not affect the \Z assertion.
+
+     The meanings of the circumflex  and  dollar  characters  are
+     changed  if  the  PCRE_MULTILINE option is set. When this is
+     the case,  they  match  immediately  after  and  immediately
+     before an internal "\n" character, respectively, in addition
+     to matching at the start and end of the subject string.  For
+     example,  the  pattern  /^abc$/  matches  the subject string
+     "def\nabc" in multiline  mode,  but  not  otherwise.  Conse-
+     quently,  patterns  that  are  anchored  in single line mode
+     because all branches start with "^" are not anchored in mul-
+     tiline mode, and a match for circumflex is possible when the
+     startoffset  argument  of  pcre_exec()  is   non-zero.   The
+     PCRE_DOLLAR_ENDONLY  option  is ignored if PCRE_MULTILINE is
+     set.
+
+     Note that the sequences \A, \Z, and \z can be used to  match
+     the  start  and end of the subject in both modes, and if all
+     branches of a pattern start with \A is it  always  anchored,
+     whether PCRE_MULTILINE is set or not.
+
+
+
+FULL STOP (PERIOD, DOT)
+     Outside a character class, a dot in the pattern matches  any
+     one character in the subject, including a non-printing char-
+     acter, but not (by default)  newline.   If  the  PCRE_DOTALL
+     option  is  set,  then dots match newlines as well. The han-
+     dling of dot is entirely independent of the handling of cir-
+     cumflex  and  dollar,  the only relationship being that they
+     both involve newline characters.  Dot has no special meaning
+     in a character class.
+
+
+
+SQUARE BRACKETS
+     An opening square bracket introduces a character class, ter-
+     minated  by  a  closing  square  bracket.  A  closing square
+     bracket on its own is  not  special.  If  a  closing  square
+     bracket  is  required as a member of the class, it should be
+     the first data character in the class (after an initial cir-
+     cumflex, if present) or escaped with a backslash.
+
+     A character class matches a single character in the subject;
+     the  character  must  be in the set of characters defined by
+     the class, unless the first character in the class is a cir-
+     cumflex,  in which case the subject character must not be in
+     the set defined by the class. If a  circumflex  is  actually
+     required  as  a  member  of  the class, ensure it is not the
+     first character, or escape it with a backslash.
+
+     For example, the character class [aeiou] matches  any  lower
+     case vowel, while [^aeiou] matches any character that is not
+     a lower case vowel. Note that a circumflex is  just  a  con-
+     venient  notation for specifying the characters which are in
+     the class by enumerating those that are not. It  is  not  an
+     assertion:  it  still  consumes a character from the subject
+     string, and fails if the current pointer is at  the  end  of
+     the string.
+
+     When caseless matching  is  set,  any  letters  in  a  class
+     represent  both their upper case and lower case versions, so
+     for example, a caseless [aeiou] matches "A" as well as  "a",
+     and  a caseless [^aeiou] does not match "A", whereas a case-
+     ful version would.
+
+     The newline character is never treated in any special way in
+     character  classes,  whatever the setting of the PCRE_DOTALL
+     or PCRE_MULTILINE options is. A  class  such  as  [^a]  will
+     always match a newline.
+
+     The minus (hyphen) character can be used to specify a  range
+     of  characters  in  a  character  class.  For example, [d-m]
+     matches any letter between d and m, inclusive.  If  a  minus
+     character  is required in a class, it must be escaped with a
+     backslash or appear in a position where it cannot be  inter-
+     preted as indicating a range, typically as the first or last
+     character in the class.
+
+     It is not possible to have the literal character "]" as  the
+     end  character  of  a  range.  A  pattern such as [W-]46] is
+     interpreted as a class of two characters ("W" and "-")  fol-
+     lowed by a literal string "46]", so it would match "W46]" or
+     "-46]". However, if the "]" is escaped with a  backslash  it
+     is  interpreted  as  the end of range, so [W-\]46] is inter-
+     preted as a single class containing a range followed by  two
+     separate characters. The octal or hexadecimal representation
+     of "]" can also be used to end a range.
+
+     Ranges operate in ASCII collating sequence. They can also be
+     used  for  characters  specified  numerically,  for  example
+     [\000-\037]. If a range that includes letters is  used  when
+     caseless  matching  is set, it matches the letters in either
+     case. For example, [W-c] is equivalent  to  [][\^_`wxyzabc],
+     matched  caselessly,  and  if  character tables for the "fr"
+     locale are in use, [\xc8-\xcb] matches accented E characters
+     in both cases.
+
+     The character types \d, \D, \s, \S,  \w,  and  \W  may  also
+     appear  in  a  character  class, and add the characters that
+     they match to the class. For example, [\dABCDEF] matches any
+     hexadecimal  digit.  A  circumflex  can conveniently be used
+     with the upper case character types to specify a  more  res-
+     tricted set of characters than the matching lower case type.
+     For example, the class [^\W_] matches any letter  or  digit,
+     but not underscore.
+
+     All non-alphameric characters other than \,  -,  ^  (at  the
+     start)  and  the  terminating ] are non-special in character
+     classes, but it does no harm if they are escaped.
+
+
+
+POSIX CHARACTER CLASSES
+     Perl 5.6 (not yet released at the time of writing) is  going
+     to  support  the POSIX notation for character classes, which
+     uses names enclosed by  [:  and  :]   within  the  enclosing
+     square brackets. PCRE supports this notation. For example,
+
+       [01[:alpha:]%]
+
+     matches "0", "1", any alphabetic character, or "%". The sup-
+     ported class names are
+
+       alnum    letters and digits
+       alpha    letters
+       ascii    character codes 0 - 127
+       cntrl    control characters
+       digit    decimal digits (same as \d)
+       graph    printing characters, excluding space
+       lower    lower case letters
+       print    printing characters, including space
+       punct    printing characters, excluding letters and digits
+       space    white space (same as \s)
+       upper    upper case letters
+       word     "word" characters (same as \w)
+       xdigit   hexadecimal digits
+
+     The names "ascii" and "word" are  Perl  extensions.  Another
+     Perl  extension is negation, which is indicated by a ^ char-
+     acter after the colon. For example,
+
+       [12[:^digit:]]
+
+     matches "1", "2", or any non-digit.  PCRE  (and  Perl)  also
+     recogize  the POSIX syntax [.ch.] and [=ch=] where "ch" is a
+     "collating element", but these are  not  supported,  and  an
+     error is given if they are encountered.
+
+
+
+VERTICAL BAR
+     Vertical bar characters are  used  to  separate  alternative
+     patterns. For example, the pattern
+
+       gilbert|sullivan
+
+     matches either "gilbert" or "sullivan". Any number of alter-
+     natives  may  appear,  and an empty alternative is permitted
+     (matching the empty string).   The  matching  process  tries
+     each  alternative in turn, from left to right, and the first
+     one that succeeds is used. If the alternatives are within  a
+     subpattern  (defined  below),  "succeeds" means matching the
+     rest of the main pattern as well as the alternative  in  the
+     subpattern.
+
+
+
+INTERNAL OPTION SETTING
+     The settings of PCRE_CASELESS, PCRE_MULTILINE,  PCRE_DOTALL,
+     and  PCRE_EXTENDED can be changed from within the pattern by
+     a sequence of Perl option letters enclosed between "(?"  and
+     ")". The option letters are
+
+       i  for PCRE_CASELESS
+       m  for PCRE_MULTILINE
+       s  for PCRE_DOTALL
+       x  for PCRE_EXTENDED
+
+     For example, (?im) sets caseless, multiline matching. It  is
+     also possible to unset these options by preceding the letter
+     with a hyphen, and a combined setting and unsetting such  as
+     (?im-sx),  which sets PCRE_CASELESS and PCRE_MULTILINE while
+     unsetting PCRE_DOTALL and PCRE_EXTENDED, is also  permitted.
+     If  a  letter  appears both before and after the hyphen, the
+     option is unset.
+
+     The scope of these option changes depends on  where  in  the
+     pattern  the  setting  occurs. For settings that are outside
+     any subpattern (defined below), the effect is the same as if
+     the  options were set or unset at the start of matching. The
+     following patterns all behave in exactly the same way:
+
+       (?i)abc
+       a(?i)bc
+       ab(?i)c
+       abc(?i)
+
+     which in turn is the same as compiling the pattern abc  with
+     PCRE_CASELESS  set.   In  other words, such "top level" set-
+     tings apply to the whole pattern  (unless  there  are  other
+     changes  inside subpatterns). If there is more than one set-
+     ting of the same option at top level, the rightmost  setting
+     is used.
+
+     If an option change occurs inside a subpattern,  the  effect
+     is  different.  This is a change of behaviour in Perl 5.005.
+     An option change inside a subpattern affects only that  part
+     of the subpattern that follows it, so
+
+       (a(?i)b)c
+
+     matches  abc  and  aBc  and  no  other   strings   (assuming
+     PCRE_CASELESS  is  not used).  By this means, options can be
+     made to have different settings in different  parts  of  the
+     pattern.  Any  changes  made  in one alternative do carry on
+     into subsequent branches within  the  same  subpattern.  For
+     example,
+
+       (a(?i)b|c)
+
+     matches "ab", "aB", "c", and "C", even though when  matching
+     "C" the first branch is abandoned before the option setting.
+     This is because the effects of  option  settings  happen  at
+     compile  time. There would be some very weird behaviour oth-
+     erwise.
+
+     The PCRE-specific options PCRE_UNGREEDY and  PCRE_EXTRA  can
+     be changed in the same way as the Perl-compatible options by
+     using the characters U and X  respectively.  The  (?X)  flag
+     setting  is  special in that it must always occur earlier in
+     the pattern than any of the additional features it turns on,
+     even when it is at top level. It is best put at the start.
+
+
+
+SUBPATTERNS
+     Subpatterns are delimited by parentheses  (round  brackets),
+     which can be nested.  Marking part of a pattern as a subpat-
+     tern does two things:
+
+     1. It localizes a set of alternatives. For example, the pat-
+     tern
+
+       cat(aract|erpillar|)
+
+     matches one of the words "cat",  "cataract",  or  "caterpil-
+     lar".  Without  the  parentheses, it would match "cataract",
+     "erpillar" or the empty string.
+
+     2. It sets up the subpattern as a capturing  subpattern  (as
+     defined  above).   When the whole pattern matches, that por-
+     tion of the subject string that matched  the  subpattern  is
+     passed  back  to  the  caller  via  the  ovector argument of
+     pcre_exec(). Opening parentheses are counted  from  left  to
+     right (starting from 1) to obtain the numbers of the captur-
+     ing subpatterns.
+
+     For example, if the string "the red king" is matched against
+     the pattern
+
+       the ((red|white) (king|queen))
+
+     the captured substrings are "red king", "red",  and  "king",
+     and are numbered 1, 2, and 3.
+
+     The fact that plain parentheses fulfil two functions is  not
+     always  helpful.  There are often times when a grouping sub-
+     pattern is required without a capturing requirement.  If  an
+     opening parenthesis is followed by "?:", the subpattern does
+     not do any capturing, and is not counted when computing  the
+     number of any subsequent capturing subpatterns. For example,
+     if the string "the white queen" is matched against the  pat-
+     tern
+
+       the ((?:red|white) (king|queen))
+
+     the captured substrings are "white queen" and  "queen",  and
+     are  numbered  1  and 2. The maximum number of captured sub-
+     strings is 99, and the maximum number  of  all  subpatterns,
+     both capturing and non-capturing, is 200.
+
+     As a  convenient  shorthand,  if  any  option  settings  are
+     required  at  the  start  of a non-capturing subpattern, the
+     option letters may appear between the "?" and the ":".  Thus
+     the two patterns
+
+       (?i:saturday|sunday)
+       (?:(?i)saturday|sunday)
+
+     match exactly the same set of strings.  Because  alternative
+     branches  are  tried from left to right, and options are not
+     reset until the end of the subpattern is reached, an  option
+     setting  in  one  branch does affect subsequent branches, so
+     the above patterns match "SUNDAY" as well as "Saturday".
+
+
+
+REPETITION
+     Repetition is specified by quantifiers, which can follow any
+     of the following items:
+
+       a single character, possibly escaped
+       the . metacharacter
+       a character class
+       a back reference (see next section)
+       a parenthesized subpattern (unless it is  an  assertion  -
+     see below)
+
+     The general repetition quantifier specifies  a  minimum  and
+     maximum  number  of  permitted  matches,  by  giving the two
+     numbers in curly brackets (braces), separated  by  a  comma.
+     The  numbers  must be less than 65536, and the first must be
+     less than or equal to the second. For example:
+
+       z{2,4}
+
+     matches "zz", "zzz", or "zzzz". A closing brace on  its  own
+     is not a special character. If the second number is omitted,
+     but the comma is present, there is no upper  limit;  if  the
+     second number and the comma are both omitted, the quantifier
+     specifies an exact number of required matches. Thus
+
+       [aeiou]{3,}
+
+     matches at least 3 successive vowels,  but  may  match  many
+     more, while
+
+       \d{8}
+
+     matches exactly 8 digits.  An  opening  curly  bracket  that
+     appears  in a position where a quantifier is not allowed, or
+     one that does not match the syntax of a quantifier, is taken
+     as  a literal character. For example, {,6} is not a quantif-
+     ier, but a literal string of four characters.
+
+     The quantifier {0} is permitted, causing the  expression  to
+     behave  as  if the previous item and the quantifier were not
+     present.
+
+     For convenience (and  historical  compatibility)  the  three
+     most common quantifiers have single-character abbreviations:
+
+       *    is equivalent to {0,}
+       +    is equivalent to {1,}
+       ?    is equivalent to {0,1}
+
+     It is possible to construct infinite loops  by  following  a
+     subpattern  that  can  match no characters with a quantifier
+     that has no upper limit, for example:
+
+       (a?)*
+
+     Earlier versions of Perl and PCRE used to give an  error  at
+     compile  time  for such patterns. However, because there are
+     cases where this  can  be  useful,  such  patterns  are  now
+     accepted,  but  if  any repetition of the subpattern does in
+     fact match no characters, the loop is forcibly broken.
+
+     By default, the quantifiers  are  "greedy",  that  is,  they
+     match  as much as possible (up to the maximum number of per-
+     mitted times), without causing the rest of  the  pattern  to
+     fail. The classic example of where this gives problems is in
+     trying to match comments in C programs. These appear between
+     the  sequences /* and */ and within the sequence, individual
+     * and / characters may appear. An attempt to  match  C  com-
+     ments by applying the pattern
+
+       /\*.*\*/
+
+     to the string
+
+       /* first command */  not comment  /* second comment */
+
+     fails, because it matches  the  entire  string  due  to  the
+     greediness of the .*  item.
+
+     However, if a quantifier is followed  by  a  question  mark,
+     then it ceases to be greedy, and instead matches the minimum
+     number of times possible, so the pattern
+
+       /\*.*?\*/
+
+     does the right thing with the C comments. The meaning of the
+     various  quantifiers is not otherwise changed, just the pre-
+     ferred number of matches.  Do not confuse this use of  ques-
+     tion  mark  with  its  use as a quantifier in its own right.
+     Because it has two uses, it can sometimes appear doubled, as
+     in
+
+       \d??\d
+
+     which matches one digit by preference, but can match two  if
+     that is the only way the rest of the pattern matches.
+
+     If the PCRE_UNGREEDY option is set (an option which  is  not
+     available  in  Perl)  then the quantifiers are not greedy by
+     default, but individual ones can be made greedy by following
+     them  with  a  question mark. In other words, it inverts the
+     default behaviour.
+
+     When a parenthesized subpattern is quantified with a minimum
+     repeat  count  that is greater than 1 or with a limited max-
+     imum, more store is required for the  compiled  pattern,  in
+     proportion to the size of the minimum or maximum.
+
+     If a pattern starts with .* or  .{0,}  and  the  PCRE_DOTALL
+     option (equivalent to Perl's /s) is set, thus allowing the .
+     to match newlines, then the pattern is implicitly  anchored,
+     because whatever follows will be tried against every charac-
+     ter position in the subject string, so there is no point  in
+     retrying  the overall match at any position after the first.
+     PCRE treats such a pattern as though it were preceded by \A.
+     In  cases where it is known that the subject string contains
+     no newlines, it is worth setting PCRE_DOTALL when  the  pat-
+     tern begins with .* in order to obtain this optimization, or
+     alternatively using ^ to indicate anchoring explicitly.
+
+     When a capturing subpattern is repeated, the value  captured
+     is the substring that matched the final iteration. For exam-
+     ple, after
+
+       (tweedle[dume]{3}\s*)+
+
+     has matched "tweedledum tweedledee" the value  of  the  cap-
+     tured  substring  is  "tweedledee".  However,  if  there are
+     nested capturing  subpatterns,  the  corresponding  captured
+     values  may  have been set in previous iterations. For exam-
+     ple, after
+
+       /(a|(b))+/
+
+     matches "aba" the value of the second captured substring  is
+     "b".
+
+
+
+BACK REFERENCES
+     Outside a character class, a backslash followed by  a  digit
+     greater  than  0  (and  possibly  further  digits) is a back
+     reference to a capturing subpattern  earlier  (i.e.  to  its
+     left)  in  the  pattern,  provided there have been that many
+     previous capturing left parentheses.
+
+     However, if the decimal number following  the  backslash  is
+     less  than  10,  it is always taken as a back reference, and
+     causes an error only if there are not  that  many  capturing
+     left  parentheses in the entire pattern. In other words, the
+     parentheses that are referenced need not be to the  left  of
+     the  reference  for  numbers  less  than 10. See the section
+     entitled "Backslash" above for further details of  the  han-
+     dling of digits following a backslash.
+
+     A back reference matches whatever actually matched the  cap-
+     turing subpattern in the current subject string, rather than
+     anything matching the subpattern itself. So the pattern
+
+       (sens|respons)e and \1ibility
+
+     matches "sense and sensibility" and "response and  responsi-
+     bility",  but  not  "sense  and  responsibility". If caseful
+     matching is in force at the time of the back reference, then
+     the case of letters is relevant. For example,
+
+       ((?i)rah)\s+\1
+
+     matches "rah rah" and "RAH RAH", but  not  "RAH  rah",  even
+     though  the  original  capturing subpattern is matched case-
+     lessly.
+
+     There may be more than one back reference to the  same  sub-
+     pattern.  If  a  subpattern  has not actually been used in a
+     particular match, then any  back  references  to  it  always
+     fail. For example, the pattern
+
+       (a|(bc))\2
+
+     always fails if it starts to match  "a"  rather  than  "bc".
+     Because  there  may  be up to 99 back references, all digits
+     following the backslash are taken as  part  of  a  potential
+     back reference number. If the pattern continues with a digit
+     character, then some delimiter must be used to terminate the
+     back reference. If the PCRE_EXTENDED option is set, this can
+     be whitespace.  Otherwise an empty comment can be used.
+
+     A back reference that occurs inside the parentheses to which
+     it  refers  fails when the subpattern is first used, so, for
+     example, (a\1) never matches.  However, such references  can
+     be  useful  inside  repeated  subpatterns.  For example, the
+     pattern
+
+       (a|b\1)+
+
+     matches any number of "a"s and also "aba", "ababaa" etc.  At
+     each iteration of the subpattern, the back reference matches
+     the character string corresponding to  the  previous  itera-
+     tion.  In  order  for this to work, the pattern must be such
+     that the first iteration does not need  to  match  the  back
+     reference.  This  can  be  done using alternation, as in the
+     example above, or by a quantifier with a minimum of zero.
+
+
+
+ASSERTIONS
+     An assertion is  a  test  on  the  characters  following  or
+     preceding  the current matching point that does not actually
+     consume any characters. The simple assertions coded  as  \b,
+     \B,  \A,  \Z,  \z, ^ and $ are described above. More compli-
+     cated assertions are coded as  subpatterns.  There  are  two
+     kinds:  those that look ahead of the current position in the
+     subject string, and those that look behind it.
+
+     An assertion subpattern is matched in the normal way, except
+     that  it  does not cause the current matching position to be
+     changed. Lookahead assertions start with  (?=  for  positive
+     assertions and (?! for negative assertions. For example,
+
+       \w+(?=;)
+
+     matches a word followed by a semicolon, but does not include
+     the semicolon in the match, and
+
+       foo(?!bar)
+
+     matches any occurrence of "foo"  that  is  not  followed  by
+     "bar". Note that the apparently similar pattern
+
+       (?!foo)bar
+
+     does not find an occurrence of "bar"  that  is  preceded  by
+     something other than "foo"; it finds any occurrence of "bar"
+     whatsoever, because the assertion  (?!foo)  is  always  true
+     when  the  next  three  characters  are  "bar". A lookbehind
+     assertion is needed to achieve this effect.
+
+     Lookbehind assertions start with (?<=  for  positive  asser-
+     tions and (?<! for negative assertions. For example,
+
+       (?<!foo)bar
+
+     does find an occurrence of "bar" that  is  not  preceded  by
+     "foo". The contents of a lookbehind assertion are restricted
+     such that all the strings  it  matches  must  have  a  fixed
+     length.  However, if there are several alternatives, they do
+     not all have to have the same fixed length. Thus
+
+       (?<=bullock|donkey)
+
+     is permitted, but
+
+       (?<!dogs?|cats?)
+
+     causes an error at compile time. Branches  that  match  dif-
+     ferent length strings are permitted only at the top level of
+     a lookbehind assertion. This is an extension  compared  with
+     Perl  5.005,  which  requires all branches to match the same
+     length of string. An assertion such as
+
+       (?<=ab(c|de))
+
+     is not permitted, because its single  top-level  branch  can
+     match two different lengths, but it is acceptable if rewrit-
+     ten to use two top-level branches:
+
+       (?<=abc|abde)
+
+     The implementation of lookbehind  assertions  is,  for  each
+     alternative,  to  temporarily move the current position back
+     by the fixed width and then  try  to  match.  If  there  are
+     insufficient  characters  before  the  current position, the
+     match is deemed to fail.  Lookbehinds  in  conjunction  with
+     once-only  subpatterns can be particularly useful for match-
+     ing at the ends of strings; an example is given at  the  end
+     of the section on once-only subpatterns.
+
+     Several assertions (of any sort) may  occur  in  succession.
+     For example,
+
+       (?<=\d{3})(?<!999)foo
+
+     matches "foo" preceded by three digits that are  not  "999".
+     Notice  that each of the assertions is applied independently
+     at the same point in the subject string. First  there  is  a
+     check  that  the  previous  three characters are all digits,
+     then there is a check that the same three characters are not
+     "999".   This  pattern  does not match "foo" preceded by six
+     characters, the first of which are digits and the last three
+     of  which  are  not  "999".  For  example,  it doesn't match
+     "123abcfoo". A pattern to do that is
+
+       (?<=\d{3}...)(?<!999)foo
+
+     This time the first assertion looks  at  the  preceding  six
+     characters,  checking  that  the first three are digits, and
+     then the second assertion checks that  the  preceding  three
+     characters are not "999".
+
+     Assertions can be nested in any combination. For example,
+
+       (?<=(?<!foo)bar)baz
+
+     matches an occurrence of "baz" that  is  preceded  by  "bar"
+     which in turn is not preceded by "foo", while
+
+       (?<=\d{3}(?!999)...)foo
+
+     is another pattern which matches  "foo"  preceded  by  three
+     digits and any three characters that are not "999".
+
+     Assertion subpatterns are not capturing subpatterns, and may
+     not  be  repeated,  because  it makes no sense to assert the
+     same thing several times. If any kind of assertion  contains
+     capturing  subpatterns  within it, these are counted for the
+     purposes of numbering the capturing subpatterns in the whole
+     pattern.   However,  substring capturing is carried out only
+     for positive assertions, because it does not make sense  for
+     negative assertions.
+
+     Assertions count towards the maximum  of  200  parenthesized
+     subpatterns.
+
+
+
+ONCE-ONLY SUBPATTERNS
+     With both maximizing and minimizing repetition,  failure  of
+     what  follows  normally  causes  the repeated item to be re-
+     evaluated to see if a different number of repeats allows the
+     rest  of  the  pattern  to  match. Sometimes it is useful to
+     prevent this, either to change the nature of the  match,  or
+     to  cause  it fail earlier than it otherwise might, when the
+     author of the pattern knows there is no  point  in  carrying
+     on.
+
+     Consider, for example, the pattern \d+foo  when  applied  to
+     the subject line
+
+       123456bar
+
+     After matching all 6 digits and then failing to match "foo",
+     the normal action of the matcher is to try again with only 5
+     digits matching the \d+ item, and then with 4,  and  so  on,
+     before ultimately failing. Once-only subpatterns provide the
+     means for specifying that once a portion of the pattern  has
+     matched,  it  is  not to be re-evaluated in this way, so the
+     matcher would give up immediately on failing to match  "foo"
+     the  first  time.  The  notation  is another kind of special
+     parenthesis, starting with (?> as in this example:
+
+       (?>\d+)bar
+
+     This kind of parenthesis "locks up" the  part of the pattern
+     it  contains once it has matched, and a failure further into
+     the pattern is prevented from backtracking  into  it.  Back-
+     tracking  past  it to previous items, however, works as nor-
+     mal.
+
+     An alternative description is that a subpattern of this type
+     matches  the  string  of  characters that an identical stan-
+     dalone pattern would match, if anchored at the current point
+     in the subject string.
+
+     Once-only subpatterns are not capturing subpatterns.  Simple
+     cases  such as the above example can be thought of as a max-
+     imizing repeat that must  swallow  everything  it  can.  So,
+     while both \d+ and \d+? are prepared to adjust the number of
+     digits they match in order to make the rest of  the  pattern
+     match, (?>\d+) can only match an entire sequence of digits.
+
+     This construction can of course contain arbitrarily  compli-
+     cated subpatterns, and it can be nested.
+
+     Once-only subpatterns can be used in conjunction with  look-
+     behind  assertions  to specify efficient matching at the end
+     of the subject string. Consider a simple pattern such as
+
+       abcd$
+
+     when applied to a long string which does not match.  Because
+     matching  proceeds  from  left  to right, PCRE will look for
+     each "a" in the subject and then see if what follows matches
+     the rest of the pattern. If the pattern is specified as
+
+       ^.*abcd$
+
+     then the initial .* matches the entire string at first,  but
+     when  this  fails  (because  there  is no following "a"), it
+     backtracks to match all but the last character, then all but
+     the  last  two  characters, and so on. Once again the search
+     for "a" covers the entire string, from right to left, so  we
+     are no better off. However, if the pattern is written as
+
+       ^(?>.*)(?<=abcd)
+
+     then there can be no backtracking for the .*  item;  it  can
+     match  only  the  entire  string.  The subsequent lookbehind
+     assertion does a single test on the last four characters. If
+     it  fails,  the  match  fails immediately. For long strings,
+     this approach makes a significant difference to the process-
+     ing time.
+
+     When a pattern contains an unlimited repeat inside a subpat-
+     tern  that  can  itself  be  repeated an unlimited number of
+     times, the use of a once-only subpattern is the only way  to
+     avoid  some  failing matches taking a very long time indeed.
+     The pattern
+
+       (\D+|<\d+>)*[!?]
+
+     matches an unlimited number of substrings that  either  con-
+     sist  of  non-digits,  or digits enclosed in <>, followed by
+     either ! or ?. When it matches, it runs quickly. However, if
+     it is applied to
+
+       aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
+
+     it takes a long  time  before  reporting  failure.  This  is
+     because the string can be divided between the two repeats in
+     a large number of ways, and all have to be tried. (The exam-
+     ple  used  [!?]  rather  than a single character at the end,
+     because both PCRE and Perl have an optimization that  allows
+     for  fast  failure  when  a  single  character is used. They
+     remember the last single character that is  required  for  a
+     match,  and  fail early if it is not present in the string.)
+     If the pattern is changed to
+
+       ((?>\D+)|<\d+>)*[!?]
+
+     sequences of non-digits cannot be broken, and  failure  hap-
+     pens quickly.
+
+
+
+CONDITIONAL SUBPATTERNS
+     It is possible to cause the matching process to obey a  sub-
+     pattern  conditionally  or to choose between two alternative
+     subpatterns, depending on the result  of  an  assertion,  or
+     whether  a previous capturing subpattern matched or not. The
+     two possible forms of conditional subpattern are
+
+       (?(condition)yes-pattern)
+       (?(condition)yes-pattern|no-pattern)
+
+     If the condition is satisfied, the yes-pattern is used; oth-
+     erwise  the  no-pattern  (if  present) is used. If there are
+     more than two alternatives in the subpattern, a compile-time
+     error occurs.
+
+     There are two kinds of condition. If the  text  between  the
+     parentheses  consists  of  a  sequence  of  digits, then the
+     condition is satisfied if the capturing subpattern  of  that
+     number  has  previously matched. Consider the following pat-
+     tern, which contains non-significant white space to make  it
+     more  readable  (assume  the  PCRE_EXTENDED  option)  and to
+     divide it into three parts for ease of discussion:
+
+       ( \( )?    [^()]+    (?(1) \) )
+
+     The first part matches an optional opening parenthesis,  and
+     if  that character is present, sets it as the first captured
+     substring. The second part matches one  or  more  characters
+     that  are  not  parentheses. The third part is a conditional
+     subpattern that tests whether the first set  of  parentheses
+     matched  or  not.  If  they did, that is, if subject started
+     with an opening parenthesis, the condition is true,  and  so
+     the  yes-pattern  is  executed  and a closing parenthesis is
+     required. Otherwise, since no-pattern is  not  present,  the
+     subpattern  matches  nothing.  In  other words, this pattern
+     matches a sequence of non-parentheses,  optionally  enclosed
+     in parentheses.
+
+     If the condition is not a sequence of digits, it must be  an
+     assertion.  This  may be a positive or negative lookahead or
+     lookbehind assertion. Consider this pattern, again  contain-
+     ing  non-significant  white space, and with the two alterna-
+     tives on the second line:
+
+       (?(?=[^a-z]*[a-z])
+       \d{2}-[a-z]{3}-\d{2}  |  \d{2}-\d{2}-\d{2} )
+
+     The condition is a positive lookahead assertion that matches
+     an optional sequence of non-letters followed by a letter. In
+     other words, it tests for  the  presence  of  at  least  one
+     letter  in the subject. If a letter is found, the subject is
+     matched against  the  first  alternative;  otherwise  it  is
+     matched  against the second. This pattern matches strings in
+     one of the two forms dd-aaa-dd or dd-dd-dd,  where  aaa  are
+     letters and dd are digits.
+
+
+
+COMMENTS
+     The sequence (?# marks the start of a comment which  contin-
+     ues  up  to the next closing parenthesis. Nested parentheses
+     are not permitted. The characters that  make  up  a  comment
+     play no part in the pattern matching at all.
+
+     If the PCRE_EXTENDED option is set, an unescaped # character
+     outside  a character class introduces a comment that contin-
+     ues up to the next newline character in the pattern.
+
+
+
+RECURSIVE PATTERNS
+     Consider the problem of matching a  string  in  parentheses,
+     allowing  for  unlimited nested parentheses. Without the use
+     of recursion, the best that can be done is to use a  pattern
+     that  matches  up  to some fixed depth of nesting. It is not
+     possible to handle an arbitrary nesting depth. Perl 5.6  has
+     provided   an  experimental  facility  that  allows  regular
+     expressions to recurse (amongst other things). It does  this
+     by  interpolating  Perl  code in the expression at run time,
+     and the code can refer to the expression itself. A Perl pat-
+     tern  to  solve  the parentheses problem can be created like
+     this:
+
+       $re = qr{\( (?: (?>[^()]+) | (?p{$re}) )* \)}x;
+
+     The (?p{...}) item interpolates Perl code at run  time,  and
+     in  this  case refers recursively to the pattern in which it
+     appears. Obviously, PCRE cannot support the interpolation of
+     Perl  code.  Instead,  the special item (?R) is provided for
+     the specific case of recursion. This PCRE pattern solves the
+     parentheses  problem (assume the PCRE_EXTENDED option is set
+     so that white space is ignored):
+
+       \( ( (?>[^()]+) | (?R) )* \)
+
+     First it matches an opening parenthesis. Then it matches any
+     number  of substrings which can either be a sequence of non-
+     parentheses, or a recursive  match  of  the  pattern  itself
+     (i.e. a correctly parenthesized substring). Finally there is
+     a closing parenthesis.
+
+     This particular example pattern  contains  nested  unlimited
+     repeats, and so the use of a once-only subpattern for match-
+     ing strings of non-parentheses is  important  when  applying
+     the  pattern to strings that do not match. For example, when
+     it is applied to
+
+       (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()
+
+     it yields "no match" quickly. However, if a  once-only  sub-
+     pattern  is  not  used,  the match runs for a very long time
+     indeed because there are so many different ways the + and  *
+     repeats  can carve up the subject, and all have to be tested
+     before failure can be reported.
+
+     The values set for any capturing subpatterns are those  from
+     the outermost level of the recursion at which the subpattern
+     value is set. If the pattern above is matched against
+
+       (ab(cd)ef)
+
+     the value for the capturing parentheses is  "ef",  which  is
+     the  last  value  taken  on  at the top level. If additional
+     parentheses are added, giving
+
+       \( ( ( (?>[^()]+) | (?R) )* ) \)
+          ^                        ^
+          ^                        ^ then the string they capture
+     is "ab(cd)ef", the contents of the top level parentheses. If
+     there are more than 15 capturing parentheses in  a  pattern,
+     PCRE  has  to  obtain  extra  memory  to store data during a
+     recursion, which it does by using  pcre_malloc,  freeing  it
+     via  pcre_free  afterwards. If no memory can be obtained, it
+     saves data for the first 15 capturing parentheses  only,  as
+     there is no way to give an out-of-memory error from within a
+     recursion.
+
+
+
+PERFORMANCE
+     Certain items that may appear in patterns are more efficient
+     than  others.  It is more efficient to use a character class
+     like [aeiou] than a set of alternatives such as (a|e|i|o|u).
+     In  general,  the  simplest  construction  that provides the
+     required behaviour is usually the  most  efficient.  Jeffrey
+     Friedl's  book contains a lot of discussion about optimizing
+     regular expressions for efficient performance.
+
+     When a pattern begins with .* and the PCRE_DOTALL option  is
+     set,  the  pattern  is implicitly anchored by PCRE, since it
+     can match only at the start of a subject string. However, if
+     PCRE_DOTALL  is not set, PCRE cannot make this optimization,
+     because the . metacharacter does not then match  a  newline,
+     and if the subject string contains newlines, the pattern may
+     match from the character immediately following one  of  them
+     instead of from the very start. For example, the pattern
+
+       (.*) second
+
+     matches the subject "first\nand second" (where \n stands for
+     a newline character) with the first captured substring being
+     "and". In order to do this, PCRE  has  to  retry  the  match
+     starting after every newline in the subject.
+
+     If you are using such a pattern with subject strings that do
+     not  contain  newlines,  the best performance is obtained by
+     setting PCRE_DOTALL, or starting the  pattern  with  ^.*  to
+     indicate  explicit anchoring. That saves PCRE from having to
+     scan along the subject looking for a newline to restart at.
+
+     Beware of patterns that contain nested  indefinite  repeats.
+     These  can  take a long time to run when applied to a string
+     that does not match. Consider the pattern fragment
+
+       (a+)*
+
+     This can match "aaaa" in 33 different ways, and this  number
+     increases  very  rapidly  as  the string gets longer. (The *
+     repeat can match 0, 1, 2, 3, or 4 times,  and  for  each  of
+     those  cases other than 0, the + repeats can match different
+     numbers of times.) When the remainder of the pattern is such
+     that  the entire match is going to fail, PCRE has in princi-
+     ple to try every possible variation, and this  can  take  an
+     extremely long time.
+
+     An optimization catches some of the more simple  cases  such
+     as
+
+       (a+)*b
+
+     where a literal character follows. Before embarking  on  the
+     standard matching procedure, PCRE checks that there is a "b"
+     later in the subject string, and if there is not,  it  fails
+     the  match  immediately. However, when there is no following
+     literal this optimization cannot be used. You  can  see  the
+     difference by comparing the behaviour of
+
+       (a+)*\d
+
+     with the pattern above. The former gives  a  failure  almost
+     instantly  when  applied  to a whole line of "a" characters,
+     whereas the latter takes an appreciable  time  with  strings
+     longer than about 20 characters.
+
+
+
+AUTHOR
+     Philip Hazel <ph10@cam.ac.uk>
+     University Computing Service,
+     New Museums Site,
+     Cambridge CB2 3QG, England.
+     Phone: +44 1223 334714
+
+     Last updated: 27 January 2000
+     Copyright (c) 1997-2000 University of Cambridge.
diff --git a/srclib/pcre/doc/pcreposix.3 b/srclib/pcre/doc/pcreposix.3
new file mode 100644
index 0000000000..1be5d9ac6f
--- /dev/null
+++ b/srclib/pcre/doc/pcreposix.3
@@ -0,0 +1,141 @@
+.TH PCRE 3
+.SH NAME
+pcreposix - POSIX API for Perl-compatible regular expressions.
+.SH SYNOPSIS
+.B #include <pcreposix.h>
+.PP
+.SM
+.br
+.B int regcomp(regex_t *\fIpreg\fR, const char *\fIpattern\fR,
+.ti +5n
+.B int \fIcflags\fR);
+.PP
+.br
+.B int regexec(regex_t *\fIpreg\fR, const char *\fIstring\fR,
+.ti +5n
+.B size_t \fInmatch\fR, regmatch_t \fIpmatch\fR[], int \fIeflags\fR);
+.PP
+.br
+.B size_t regerror(int \fIerrcode\fR, const regex_t *\fIpreg\fR,
+.ti +5n
+.B char *\fIerrbuf\fR, size_t \fIerrbuf_size\fR);
+.PP
+.br
+.B void regfree(regex_t *\fIpreg\fR);
+
+
+.SH DESCRIPTION
+This set of functions provides a POSIX-style API to the PCRE regular expression
+package. See the \fBpcre\fR documentation for a description of the native API,
+which contains additional functionality.
+
+The functions described here are just wrapper functions that ultimately call
+the native API. Their prototypes are defined in the \fBpcreposix.h\fR header
+file, and on Unix systems the library itself is called \fBpcreposix.a\fR, so
+can be accessed by adding \fB-lpcreposix\fR to the command for linking an
+application which uses them. Because the POSIX functions call the native ones,
+it is also necessary to add \fR-lpcre\fR.
+
+I have implemented only those option bits that can be reasonably mapped to PCRE
+native options. In addition, the options REG_EXTENDED and REG_NOSUB are defined
+with the value zero. They have no effect, but since programs that are written
+to the POSIX interface often use them, this makes it easier to slot in PCRE as
+a replacement library. Other POSIX options are not even defined.
+
+When PCRE is called via these functions, it is only the API that is POSIX-like
+in style. The syntax and semantics of the regular expressions themselves are
+still those of Perl, subject to the setting of various PCRE options, as
+described below.
+
+The header for these functions is supplied as \fBpcreposix.h\fR to avoid any
+potential clash with other POSIX libraries. It can, of course, be renamed or
+aliased as \fBregex.h\fR, which is the "correct" name. It provides two
+structure types, \fIregex_t\fR for compiled internal forms, and
+\fIregmatch_t\fR for returning captured substrings. It also defines some
+constants whose names start with "REG_"; these are used for setting options and
+identifying error codes.
+
+
+.SH COMPILING A PATTERN
+
+The function \fBregcomp()\fR is called to compile a pattern into an
+internal form. The pattern is a C string terminated by a binary zero, and
+is passed in the argument \fIpattern\fR. The \fIpreg\fR argument is a pointer
+to a regex_t structure which is used as a base for storing information about
+the compiled expression.
+
+The argument \fIcflags\fR is either zero, or contains one or more of the bits
+defined by the following macros:
+
+  REG_ICASE
+
+The PCRE_CASELESS option is set when the expression is passed for compilation
+to the native function.
+
+  REG_NEWLINE
+
+The PCRE_MULTILINE option is set when the expression is passed for compilation
+to the native function.
+
+The yield of \fBregcomp()\fR is zero on success, and non-zero otherwise. The
+\fIpreg\fR structure is filled in on success, and one member of the structure
+is publicized: \fIre_nsub\fR contains the number of capturing subpatterns in
+the regular expression. Various error codes are defined in the header file.
+
+
+.SH MATCHING A PATTERN
+The function \fBregexec()\fR is called to match a pre-compiled pattern
+\fIpreg\fR against a given \fIstring\fR, which is terminated by a zero byte,
+subject to the options in \fIeflags\fR. These can be:
+
+  REG_NOTBOL
+
+The PCRE_NOTBOL option is set when calling the underlying PCRE matching
+function.
+
+  REG_NOTEOL
+
+The PCRE_NOTEOL option is set when calling the underlying PCRE matching
+function.
+
+The portion of the string that was matched, and also any captured substrings,
+are returned via the \fIpmatch\fR argument, which points to an array of
+\fInmatch\fR structures of type \fIregmatch_t\fR, containing the members
+\fIrm_so\fR and \fIrm_eo\fR. These contain the offset to the first character of
+each substring and the offset to the first character after the end of each
+substring, respectively. The 0th element of the vector relates to the entire
+portion of \fIstring\fR that was matched; subsequent elements relate to the
+capturing subpatterns of the regular expression. Unused entries in the array
+have both structure members set to -1.
+
+A successful match yields a zero return; various error codes are defined in the
+header file, of which REG_NOMATCH is the "expected" failure code.
+
+
+.SH ERROR MESSAGES
+The \fBregerror()\fR function maps a non-zero errorcode from either
+\fBregcomp\fR or \fBregexec\fR to a printable message. If \fIpreg\fR is not
+NULL, the error should have arisen from the use of that structure. A message
+terminated by a binary zero is placed in \fIerrbuf\fR. The length of the
+message, including the zero, is limited to \fIerrbuf_size\fR. The yield of the
+function is the size of buffer needed to hold the whole message.
+
+
+.SH STORAGE
+Compiling a regular expression causes memory to be allocated and associated
+with the \fIpreg\fR structure. The function \fBregfree()\fR frees all such
+memory, after which \fIpreg\fR may no longer be used as a compiled expression.
+
+
+.SH AUTHOR
+Philip Hazel <ph10@cam.ac.uk>
+.br
+University Computing Service,
+.br
+New Museums Site,
+.br
+Cambridge CB2 3QG, England.
+.br
+Phone: +44 1223 334714
+
+Copyright (c) 1997-1999 University of Cambridge.
diff --git a/srclib/pcre/doc/pcreposix.html b/srclib/pcre/doc/pcreposix.html
new file mode 100644
index 0000000000..121d90f867
--- /dev/null
+++ b/srclib/pcre/doc/pcreposix.html
@@ -0,0 +1,182 @@
+<HTML>
+<HEAD>
+<TITLE>pcreposix specification</TITLE>
+</HEAD>
+<body bgcolor="#FFFFFF" text="#00005A">
+<H1>pcreposix specification</H1>
+This HTML document has been generated automatically from the original man page.
+If there is any nonsense in it, please consult the man page in case the
+conversion went wrong.
+<UL>
+<LI><A NAME="TOC1" HREF="#SEC1">NAME</A>
+<LI><A NAME="TOC2" HREF="#SEC2">SYNOPSIS</A>
+<LI><A NAME="TOC3" HREF="#SEC3">DESCRIPTION</A>
+<LI><A NAME="TOC4" HREF="#SEC4">COMPILING A PATTERN</A>
+<LI><A NAME="TOC5" HREF="#SEC5">MATCHING A PATTERN</A>
+<LI><A NAME="TOC6" HREF="#SEC6">ERROR MESSAGES</A>
+<LI><A NAME="TOC7" HREF="#SEC7">STORAGE</A>
+<LI><A NAME="TOC8" HREF="#SEC8">AUTHOR</A>
+</UL>
+<LI><A NAME="SEC1" HREF="#TOC1">NAME</A>
+<P>
+pcreposix - POSIX API for Perl-compatible regular expressions.
+</P>
+<LI><A NAME="SEC2" HREF="#TOC1">SYNOPSIS</A>
+<P>
+<B>#include &#60;pcreposix.h&#62;</B>
+</P>
+<P>
+<B>int regcomp(regex_t *<I>preg</I>, const char *<I>pattern</I>,</B>
+<B>int <I>cflags</I>);</B>
+</P>
+<P>
+<B>int regexec(regex_t *<I>preg</I>, const char *<I>string</I>,</B>
+<B>size_t <I>nmatch</I>, regmatch_t <I>pmatch</I>[], int <I>eflags</I>);</B>
+</P>
+<P>
+<B>size_t regerror(int <I>errcode</I>, const regex_t *<I>preg</I>,</B>
+<B>char *<I>errbuf</I>, size_t <I>errbuf_size</I>);</B>
+</P>
+<P>
+<B>void regfree(regex_t *<I>preg</I>);</B>
+</P>
+<LI><A NAME="SEC3" HREF="#TOC1">DESCRIPTION</A>
+<P>
+This set of functions provides a POSIX-style API to the PCRE regular expression
+package. See the <B>pcre</B> documentation for a description of the native API,
+which contains additional functionality.
+</P>
+<P>
+The functions described here are just wrapper functions that ultimately call
+the native API. Their prototypes are defined in the <B>pcreposix.h</B> header
+file, and on Unix systems the library itself is called <B>pcreposix.a</B>, so
+can be accessed by adding <B>-lpcreposix</B> to the command for linking an
+application which uses them. Because the POSIX functions call the native ones,
+it is also necessary to add \fR-lpcre\fR.
+</P>
+<P>
+I have implemented only those option bits that can be reasonably mapped to PCRE
+native options. In addition, the options REG_EXTENDED and REG_NOSUB are defined
+with the value zero. They have no effect, but since programs that are written
+to the POSIX interface often use them, this makes it easier to slot in PCRE as
+a replacement library. Other POSIX options are not even defined.
+</P>
+<P>
+When PCRE is called via these functions, it is only the API that is POSIX-like
+in style. The syntax and semantics of the regular expressions themselves are
+still those of Perl, subject to the setting of various PCRE options, as
+described below.
+</P>
+<P>
+The header for these functions is supplied as <B>pcreposix.h</B> to avoid any
+potential clash with other POSIX libraries. It can, of course, be renamed or
+aliased as <B>regex.h</B>, which is the "correct" name. It provides two
+structure types, <I>regex_t</I> for compiled internal forms, and
+<I>regmatch_t</I> for returning captured substrings. It also defines some
+constants whose names start with "REG_"; these are used for setting options and
+identifying error codes.
+</P>
+<LI><A NAME="SEC4" HREF="#TOC1">COMPILING A PATTERN</A>
+<P>
+The function <B>regcomp()</B> is called to compile a pattern into an
+internal form. The pattern is a C string terminated by a binary zero, and
+is passed in the argument <I>pattern</I>. The <I>preg</I> argument is a pointer
+to a regex_t structure which is used as a base for storing information about
+the compiled expression.
+</P>
+<P>
+The argument <I>cflags</I> is either zero, or contains one or more of the bits
+defined by the following macros:
+</P>
+<P>
+<PRE>
+  REG_ICASE
+</PRE>
+</P>
+<P>
+The PCRE_CASELESS option is set when the expression is passed for compilation
+to the native function.
+</P>
+<P>
+<PRE>
+  REG_NEWLINE
+</PRE>
+</P>
+<P>
+The PCRE_MULTILINE option is set when the expression is passed for compilation
+to the native function.
+</P>
+<P>
+The yield of <B>regcomp()</B> is zero on success, and non-zero otherwise. The
+<I>preg</I> structure is filled in on success, and one member of the structure
+is publicized: <I>re_nsub</I> contains the number of capturing subpatterns in
+the regular expression. Various error codes are defined in the header file.
+</P>
+<LI><A NAME="SEC5" HREF="#TOC1">MATCHING A PATTERN</A>
+<P>
+The function <B>regexec()</B> is called to match a pre-compiled pattern
+<I>preg</I> against a given <I>string</I>, which is terminated by a zero byte,
+subject to the options in <I>eflags</I>. These can be:
+</P>
+<P>
+<PRE>
+  REG_NOTBOL
+</PRE>
+</P>
+<P>
+The PCRE_NOTBOL option is set when calling the underlying PCRE matching
+function.
+</P>
+<P>
+<PRE>
+  REG_NOTEOL
+</PRE>
+</P>
+<P>
+The PCRE_NOTEOL option is set when calling the underlying PCRE matching
+function.
+</P>
+<P>
+The portion of the string that was matched, and also any captured substrings,
+are returned via the <I>pmatch</I> argument, which points to an array of
+<I>nmatch</I> structures of type <I>regmatch_t</I>, containing the members
+<I>rm_so</I> and <I>rm_eo</I>. These contain the offset to the first character of
+each substring and the offset to the first character after the end of each
+substring, respectively. The 0th element of the vector relates to the entire
+portion of <I>string</I> that was matched; subsequent elements relate to the
+capturing subpatterns of the regular expression. Unused entries in the array
+have both structure members set to -1.
+</P>
+<P>
+A successful match yields a zero return; various error codes are defined in the
+header file, of which REG_NOMATCH is the "expected" failure code.
+</P>
+<LI><A NAME="SEC6" HREF="#TOC1">ERROR MESSAGES</A>
+<P>
+The <B>regerror()</B> function maps a non-zero errorcode from either
+<B>regcomp</B> or <B>regexec</B> to a printable message. If <I>preg</I> is not
+NULL, the error should have arisen from the use of that structure. A message
+terminated by a binary zero is placed in <I>errbuf</I>. The length of the
+message, including the zero, is limited to <I>errbuf_size</I>. The yield of the
+function is the size of buffer needed to hold the whole message.
+</P>
+<LI><A NAME="SEC7" HREF="#TOC1">STORAGE</A>
+<P>
+Compiling a regular expression causes memory to be allocated and associated
+with the <I>preg</I> structure. The function <B>regfree()</B> frees all such
+memory, after which <I>preg</I> may no longer be used as a compiled expression.
+</P>
+<LI><A NAME="SEC8" HREF="#TOC1">AUTHOR</A>
+<P>
+Philip Hazel &#60;ph10@cam.ac.uk&#62;
+<BR>
+University Computing Service,
+<BR>
+New Museums Site,
+<BR>
+Cambridge CB2 3QG, England.
+<BR>
+Phone: +44 1223 334714
+</P>
+<P>
+Copyright (c) 1997-1999 University of Cambridge.
diff --git a/srclib/pcre/doc/pcreposix.txt b/srclib/pcre/doc/pcreposix.txt
new file mode 100644
index 0000000000..4a7036f340
--- /dev/null
+++ b/srclib/pcre/doc/pcreposix.txt
@@ -0,0 +1,150 @@
+NAME
+     pcreposix - POSIX API for  Perl-compatible  regular  expres-
+     sions.
+
+
+
+SYNOPSIS
+     #include <pcreposix.h>
+
+     int regcomp(regex_t *preg, const char *pattern,
+          int cflags);
+
+     int regexec(regex_t *preg, const char *string,
+          size_t nmatch, regmatch_t pmatch[], int eflags);
+
+     size_t regerror(int errcode, const regex_t *preg,
+          char *errbuf, size_t errbuf_size);
+
+     void regfree(regex_t *preg);
+
+
+
+DESCRIPTION
+     This set of functions provides a POSIX-style API to the PCRE
+     regular expression package. See the pcre documentation for a
+     description of the native  API,  which  contains  additional
+     functionality.
+
+     The functions described here are just wrapper functions that
+     ultimately call the native API. Their prototypes are defined
+     in the pcreposix.h header file,  and  on  Unix  systems  the
+     library  itself is called pcreposix.a, so can be accessed by
+     adding -lpcreposix to the command for linking an application
+     which uses them. Because the POSIX functions call the native
+     ones, it is also necessary to add -lpcre.
+
+     I have implemented only those option bits that can  be  rea-
+     sonably  mapped  to  PCRE  native  options. In addition, the
+     options REG_EXTENDED and  REG_NOSUB  are  defined  with  the
+     value zero. They have no effect, but since programs that are
+     written to the POSIX interface often use them, this makes it
+     easier to slot in PCRE as a replacement library. Other POSIX
+     options are not even defined.
+
+     When PCRE is called via these functions, it is only the  API
+     that is POSIX-like in style. The syntax and semantics of the
+     regular expressions themselves are still those of Perl, sub-
+     ject  to  the  setting of various PCRE options, as described
+     below.
+
+     The header for these functions is supplied as pcreposix.h to
+     avoid  any  potential  clash  with other POSIX libraries. It
+     can, of course, be renamed or aliased as regex.h,  which  is
+     the "correct" name. It provides two structure types, regex_t
+     for compiled internal forms, and  regmatch_t  for  returning
+     captured  substrings.  It  also defines some constants whose
+     names start with "REG_"; these are used for setting  options
+     and identifying error codes.
+
+
+
+COMPILING A PATTERN
+     The function regcomp() is called to compile a  pattern  into
+     an  internal form. The pattern is a C string terminated by a
+     binary zero, and is passed in the argument pattern. The preg
+     argument  is  a pointer to a regex_t structure which is used
+     as a base for storing information about the compiled expres-
+     sion.
+
+     The argument cflags is either zero, or contains one or  more
+     of the bits defined by the following macros:
+
+       REG_ICASE
+
+     The PCRE_CASELESS option  is  set  when  the  expression  is
+     passed for compilation to the native function.
+
+       REG_NEWLINE
+
+     The PCRE_MULTILINE option is  set  when  the  expression  is
+     passed for compilation to the native function.
+
+     The yield of regcomp() is zero on success, and non-zero oth-
+     erwise.  The preg structure is filled in on success, and one
+     member of the structure is publicized: re_nsub contains  the
+     number  of  capturing subpatterns in the regular expression.
+     Various error codes are defined in the header file.
+
+
+
+MATCHING A PATTERN
+     The function regexec() is called  to  match  a  pre-compiled
+     pattern  preg against a given string, which is terminated by
+     a zero byte, subject to the options in eflags. These can be:
+
+       REG_NOTBOL
+
+     The PCRE_NOTBOL option is set when  calling  the  underlying
+     PCRE matching function.
+
+       REG_NOTEOL
+
+     The PCRE_NOTEOL option is set when  calling  the  underlying
+     PCRE matching function.
+
+     The portion of the string that was  matched,  and  also  any
+     captured  substrings,  are returned via the pmatch argument,
+     which points to  an  array  of  nmatch  structures  of  type
+     regmatch_t,  containing  the  members rm_so and rm_eo. These
+     contain the offset to the first character of each  substring
+     and  the offset to the first character after the end of each
+     substring, respectively.  The  0th  element  of  the  vector
+     relates  to  the  entire portion of string that was matched;
+     subsequent elements relate to the capturing  subpatterns  of
+     the  regular  expression.  Unused  entries in the array have
+     both structure members set to -1.
+
+     A successful match yields a zero return; various error codes
+     are  defined in the header file, of which REG_NOMATCH is the
+     "expected" failure code.
+
+
+
+ERROR MESSAGES
+     The regerror()  function  maps  a  non-zero  errorcode  from
+     either regcomp or regexec to a printable message. If preg is
+     not NULL, the error should have arisen from the use of  that
+     structure.  A  message terminated by a binary zero is placed
+     in errbuf. The length of the message, including the zero, is
+     limited  to  errbuf_size.  The  yield of the function is the
+     size of buffer needed to hold the whole message.
+
+
+
+STORAGE
+     Compiling a regular expression causes memory to be allocated
+     and  associated  with  the preg structure. The function reg-
+     free() frees all such memory, after which preg may no longer
+     be used as a compiled expression.
+
+
+
+AUTHOR
+     Philip Hazel <ph10@cam.ac.uk>
+     University Computing Service,
+     New Museums Site,
+     Cambridge CB2 3QG, England.
+     Phone: +44 1223 334714
+
+     Copyright (c) 1997-1999 University of Cambridge.
diff --git a/srclib/pcre/doc/pcretest.txt b/srclib/pcre/doc/pcretest.txt
new file mode 100644
index 0000000000..831fdac987
--- /dev/null
+++ b/srclib/pcre/doc/pcretest.txt
@@ -0,0 +1,216 @@
+The pcretest program
+--------------------
+
+This program is intended for testing PCRE, but it can also be used for
+experimenting with regular expressions.
+
+If it is given two filename arguments, it reads from the first and writes to
+the second. If it is given only one filename argument, it reads from that file
+and writes to stdout. Otherwise, it reads from stdin and writes to stdout, and
+prompts for each line of input, using "re>" to prompt for regular expressions,
+and "data>" to prompt for data lines.
+
+The program handles any number of sets of input on a single input file. Each
+set starts with a regular expression, and continues with any number of data
+lines to be matched against the pattern. An empty line signals the end of the
+data lines, at which point a new regular expression is read. The regular
+expressions are given enclosed in any non-alphameric delimiters other than
+backslash, for example
+
+  /(a|bc)x+yz/
+
+White space before the initial delimiter is ignored. A regular expression may
+be continued over several input lines, in which case the newline characters are
+included within it. See the test input files in the testdata directory for many
+examples. It is possible to include the delimiter within the pattern by
+escaping it, for example
+
+  /abc\/def/
+
+If you do so, the escape and the delimiter form part of the pattern, but since
+delimiters are always non-alphameric, this does not affect its interpretation.
+If the terminating delimiter is immediately followed by a backslash, for
+example,
+
+  /abc/\
+
+then a backslash is added to the end of the pattern. This is done to provide a
+way of testing the error condition that arises if a pattern finishes with a
+backslash, because
+
+  /abc\/
+
+is interpreted as the first line of a pattern that starts with "abc/", causing
+pcretest to read the next line as a continuation of the regular expression.
+
+The pattern may be followed by i, m, s, or x to set the PCRE_CASELESS,
+PCRE_MULTILINE, PCRE_DOTALL, or PCRE_EXTENDED options, respectively. For
+example:
+
+  /caseless/i
+
+These modifier letters have the same effect as they do in Perl. There are
+others which set PCRE options that do not correspond to anything in Perl: /A,
+/E, and /X set PCRE_ANCHORED, PCRE_DOLLAR_ENDONLY, and PCRE_EXTRA respectively.
+
+Searching for all possible matches within each subject string can be requested
+by the /g or /G modifier. After finding a match, PCRE is called again to search
+the remainder of the subject string. The difference between /g and /G is that
+the former uses the startoffset argument to pcre_exec() to start searching at
+a new point within the entire string (which is in effect what Perl does),
+whereas the latter passes over a shortened substring. This makes a difference
+to the matching process if the pattern begins with a lookbehind assertion
+(including \b or \B).
+
+If any call to pcre_exec() in a /g or /G sequence matches an empty string, the
+next call is done with the PCRE_NOTEMPTY flag set so that it cannot match an
+empty string again at the same point. If however, this second match fails, the
+start offset is advanced by one, and the match is retried. This imitates the
+way Perl handles such cases when using the /g modifier or the split() function.
+
+There are a number of other modifiers for controlling the way pcretest
+operates.
+
+The /+ modifier requests that as well as outputting the substring that matched
+the entire pattern, pcretest should in addition output the remainder of the
+subject string. This is useful for tests where the subject contains multiple
+copies of the same substring.
+
+The /L modifier must be followed directly by the name of a locale, for example,
+
+  /pattern/Lfr
+
+For this reason, it must be the last modifier letter. The given locale is set,
+pcre_maketables() is called to build a set of character tables for the locale,
+and this is then passed to pcre_compile() when compiling the regular
+expression. Without an /L modifier, NULL is passed as the tables pointer; that
+is, /L applies only to the expression on which it appears.
+
+The /I modifier requests that pcretest output information about the compiled
+expression (whether it is anchored, has a fixed first character, and so on). It
+does this by calling pcre_fullinfo() after compiling an expression, and
+outputting the information it gets back. If the pattern is studied, the results
+of that are also output.
+
+The /D modifier is a PCRE debugging feature, which also assumes /I. It causes
+the internal form of compiled regular expressions to be output after
+compilation.
+
+The /S modifier causes pcre_study() to be called after the expression has been
+compiled, and the results used when the expression is matched.
+
+The /M modifier causes the size of memory block used to hold the compiled
+pattern to be output.
+
+Finally, the /P modifier causes pcretest to call PCRE via the POSIX wrapper API
+rather than its native API. When this is done, all other modifiers except /i,
+/m, and /+ are ignored. REG_ICASE is set if /i is present, and REG_NEWLINE is
+set if /m is present. The wrapper functions force PCRE_DOLLAR_ENDONLY always,
+and PCRE_DOTALL unless REG_NEWLINE is set.
+
+Before each data line is passed to pcre_exec(), leading and trailing whitespace
+is removed, and it is then scanned for \ escapes. The following are recognized:
+
+  \a     alarm (= BEL)
+  \b     backspace
+  \e     escape
+  \f     formfeed
+  \n     newline
+  \r     carriage return
+  \t     tab
+  \v     vertical tab
+  \nnn   octal character (up to 3 octal digits)
+  \xhh   hexadecimal character (up to 2 hex digits)
+
+  \A     pass the PCRE_ANCHORED option to pcre_exec()
+  \B     pass the PCRE_NOTBOL option to pcre_exec()
+  \Cdd   call pcre_copy_substring() for substring dd after a successful match
+           (any decimal number less than 32)
+  \Gdd   call pcre_get_substring() for substring dd after a successful match
+           (any decimal number less than 32)
+  \L     call pcre_get_substringlist() after a successful match
+  \N     pass the PCRE_NOTEMPTY option to pcre_exec()
+  \Odd   set the size of the output vector passed to pcre_exec() to dd
+           (any number of decimal digits)
+  \Z     pass the PCRE_NOTEOL option to pcre_exec()
+
+A backslash followed by anything else just escapes the anything else. If the
+very last character is a backslash, it is ignored. This gives a way of passing
+an empty line as data, since a real empty line terminates the data input.
+
+If /P was present on the regex, causing the POSIX wrapper API to be used, only
+\B, and \Z have any effect, causing REG_NOTBOL and REG_NOTEOL to be passed to
+regexec() respectively.
+
+When a match succeeds, pcretest outputs the list of captured substrings that
+pcre_exec() returns, starting with number 0 for the string that matched the
+whole pattern. Here is an example of an interactive pcretest run.
+
+  $ pcretest
+  PCRE version 2.06 08-Jun-1999
+
+    re> /^abc(\d+)/
+  data> abc123
+   0: abc123
+   1: 123
+  data> xyz
+  No match
+
+If the strings contain any non-printing characters, they are output as \0x
+escapes. If the pattern has the /+ modifier, then the output for substring 0 is
+followed by the the rest of the subject string, identified by "0+" like this:
+
+    re> /cat/+
+  data> cataract
+   0: cat
+   0+ aract
+
+If the pattern has the /g or /G modifier, the results of successive matching
+attempts are output in sequence, like this:
+
+    re> /\Bi(\w\w)/g
+  data> Mississippi
+   0: iss
+   1: ss
+   0: iss
+   1: ss
+   0: ipp
+   1: pp
+
+"No match" is output only if the first match attempt fails.
+
+If any of \C, \G, or \L are present in a data line that is successfully
+matched, the substrings extracted by the convenience functions are output with
+C, G, or L after the string number instead of a colon. This is in addition to
+the normal full list. The string length (that is, the return from the
+extraction function) is given in parentheses after each string for \C and \G.
+
+Note that while patterns can be continued over several lines (a plain ">"
+prompt is used for continuations), data lines may not. However newlines can be
+included in data by means of the \n escape.
+
+If the -p option is given to pcretest, it is equivalent to adding /P to each
+regular expression: the POSIX wrapper API is used to call PCRE. None of the
+following flags has any effect in this case.
+
+If the option -d is given to pcretest, it is equivalent to adding /D to each
+regular expression: the internal form is output after compilation.
+
+If the option -i is given to pcretest, it is equivalent to adding /I to each
+regular expression: information about the compiled pattern is given after
+compilation.
+
+If the option -m is given to pcretest, it outputs the size of each compiled
+pattern after it has been compiled. It is equivalent to adding /M to each
+regular expression. For compatibility with earlier versions of pcretest, -s is
+a synonym for -m.
+
+If the -t option is given, each compile, study, and match is run 20000 times
+while being timed, and the resulting time per compile or match is output in
+milliseconds. Do not set -t with -s, because you will then get the size output
+20000 times and the timing will be distorted. If you want to change the number
+of repetitions used for timing, edit the definition of LOOPREPEAT at the top of
+pcretest.c
+
+Philip Hazel <ph10@cam.ac.uk>
+January 2000
diff --git a/srclib/pcre/doc/perltest.txt b/srclib/pcre/doc/perltest.txt
new file mode 100644
index 0000000000..6c38ebe19f
--- /dev/null
+++ b/srclib/pcre/doc/perltest.txt
@@ -0,0 +1,23 @@
+The perltest program
+--------------------
+
+The perltest program tests Perl's regular expressions; it has the same
+specification as pcretest, and so can be given identical input, except that
+input patterns can be followed only by Perl's lower case modifiers and /+ (as
+used by pcretest), which is recognized and handled by the program.
+
+The data lines are processed as Perl double-quoted strings, so if they contain
+" \ $ or @ characters, these have to be escaped. For this reason, all such
+characters in testinput1 and testinput3 are escaped so that they can be used
+for perltest as well as for pcretest, and the special upper case modifiers such
+as /A that pcretest recognizes are not used in these files. The output should
+be identical, apart from the initial identifying banner.
+
+The testinput2 and testinput4 files are not suitable for feeding to perltest,
+since they do make use of the special upper case modifiers and escapes that
+pcretest uses to test some features of PCRE. The first of these files also
+contains malformed regular expressions, in order to check that PCRE diagnoses
+them correctly.
+
+Philip Hazel <ph10@cam.ac.uk>
+January 2000
diff --git a/srclib/pcre/doc/pgrep.1 b/srclib/pcre/doc/pgrep.1
new file mode 100644
index 0000000000..d9e9b575e0
--- /dev/null
+++ b/srclib/pcre/doc/pgrep.1
@@ -0,0 +1,76 @@
+.TH PGREP 1
+.SH NAME
+pgrep - a grep with Perl-compatible regular expressions.
+.SH SYNOPSIS
+.B pgrep [-Vchilnsvx] pattern [file] ...
+
+
+.SH DESCRIPTION
+\fBpgrep\fR searches files for character patterns, in the same way as other
+grep commands do, but it uses the PCRE regular expression library to support
+patterns that are compatible with the regular expressions of Perl 5. See
+\fBpcre(3)\fR for a full description of syntax and semantics.
+
+If no files are specified, \fBpgrep\fR reads the standard input. By default,
+each line that matches the pattern is copied to the standard output, and if
+there is more than one file, the file name is printed before each line of
+output. However, there are options that can change how \fBpgrep\fR behaves.
+
+Lines are limited to BUFSIZ characters. BUFSIZ is defined in \fB<stdio.h>\fR.
+The newline character is removed from the end of each line before it is matched
+against the pattern.
+
+
+.SH OPTIONS
+.TP 10
+\fB-V\fR
+Write the version number of the PCRE library being used to the standard error
+stream.
+.TP
+\fB-c\fR
+Do not print individual lines; instead just print a count of the number of
+lines that would otherwise have been printed. If several files are given, a
+count is printed for each of them.
+.TP
+\fB-h\fR
+Suppress printing of filenames when searching multiple files.
+.TP
+\fB-i\fR
+Ignore upper/lower case distinctions during comparisons.
+.TP
+\fB-l\fR
+Instead of printing lines from the files, just print the names of the files
+containing lines that would have been printed. Each file name is printed
+once, on a separate line.
+.TP
+\fB-n\fR
+Precede each line by its line number in the file.
+.TP
+\fB-s\fR
+Work silently, that is, display nothing except error messages.
+The exit status indicates whether any matches were found.
+.TP
+\fB-v\fR
+Invert the sense of the match, so that lines which do \fInot\fR match the
+pattern are now the ones that are found.
+.TP
+\fB-x\fR
+Force the pattern to be anchored (it must start matching at the beginning of
+the line) and in addition, require it to match the entire line. This is
+equivalent to having ^ and $ characters at the start and end of each
+alternative branch in the regular expression.
+
+
+.SH SEE ALSO
+\fBpcre(3)\fR, Perl 5 documentation
+
+
+.SH DIAGNOSTICS
+Exit status is 0 if any matches were found, 1 if no matches were found, and 2
+for syntax errors or inacessible files (even if matches were found).
+
+
+.SH AUTHOR
+Philip Hazel <ph10@cam.ac.uk>
+.br
+Copyright (c) 1997-1999 University of Cambridge.
diff --git a/srclib/pcre/doc/pgrep.html b/srclib/pcre/doc/pgrep.html
new file mode 100644
index 0000000000..54efed6785
--- /dev/null
+++ b/srclib/pcre/doc/pgrep.html
@@ -0,0 +1,105 @@
+<HTML>
+<HEAD>
+<TITLE>pgrep specification</TITLE>
+</HEAD>
+<body bgcolor="#FFFFFF" text="#00005A">
+<H1>pgrep specification</H1>
+This HTML document has been generated automatically from the original man page.
+If there is any nonsense in it, please consult the man page in case the
+conversion went wrong.
+<UL>
+<LI><A NAME="TOC1" HREF="#SEC1">NAME</A>
+<LI><A NAME="TOC2" HREF="#SEC2">SYNOPSIS</A>
+<LI><A NAME="TOC3" HREF="#SEC3">DESCRIPTION</A>
+<LI><A NAME="TOC4" HREF="#SEC4">OPTIONS</A>
+<LI><A NAME="TOC5" HREF="#SEC5">SEE ALSO</A>
+<LI><A NAME="TOC6" HREF="#SEC6">DIAGNOSTICS</A>
+<LI><A NAME="TOC7" HREF="#SEC7">AUTHOR</A>
+</UL>
+<LI><A NAME="SEC1" HREF="#TOC1">NAME</A>
+<P>
+pgrep - a grep with Perl-compatible regular expressions.
+</P>
+<LI><A NAME="SEC2" HREF="#TOC1">SYNOPSIS</A>
+<P>
+<B>pgrep [-Vchilnsvx] pattern [file] ...</B>
+</P>
+<LI><A NAME="SEC3" HREF="#TOC1">DESCRIPTION</A>
+<P>
+<B>pgrep</B> searches files for character patterns, in the same way as other
+grep commands do, but it uses the PCRE regular expression library to support
+patterns that are compatible with the regular expressions of Perl 5. See
+<B>pcre(3)</B> for a full description of syntax and semantics.
+</P>
+<P>
+If no files are specified, <B>pgrep</B> reads the standard input. By default,
+each line that matches the pattern is copied to the standard output, and if
+there is more than one file, the file name is printed before each line of
+output. However, there are options that can change how <B>pgrep</B> behaves.
+</P>
+<P>
+Lines are limited to BUFSIZ characters. BUFSIZ is defined in <B>&#60;stdio.h&#62;</B>.
+The newline character is removed from the end of each line before it is matched
+against the pattern.
+</P>
+<LI><A NAME="SEC4" HREF="#TOC1">OPTIONS</A>
+<P>
+<B>-V</B>
+Write the version number of the PCRE library being used to the standard error
+stream.
+</P>
+<P>
+<B>-c</B>
+Do not print individual lines; instead just print a count of the number of
+lines that would otherwise have been printed. If several files are given, a
+count is printed for each of them.
+</P>
+<P>
+<B>-h</B>
+Suppress printing of filenames when searching multiple files.
+</P>
+<P>
+<B>-i</B>
+Ignore upper/lower case distinctions during comparisons.
+</P>
+<P>
+<B>-l</B>
+Instead of printing lines from the files, just print the names of the files
+containing lines that would have been printed. Each file name is printed
+once, on a separate line.
+</P>
+<P>
+<B>-n</B>
+Precede each line by its line number in the file.
+</P>
+<P>
+<B>-s</B>
+Work silently, that is, display nothing except error messages.
+The exit status indicates whether any matches were found.
+</P>
+<P>
+<B>-v</B>
+Invert the sense of the match, so that lines which do <I>not</I> match the
+pattern are now the ones that are found.
+</P>
+<P>
+<B>-x</B>
+Force the pattern to be anchored (it must start matching at the beginning of
+the line) and in addition, require it to match the entire line. This is
+equivalent to having ^ and $ characters at the start and end of each
+alternative branch in the regular expression.
+</P>
+<LI><A NAME="SEC5" HREF="#TOC1">SEE ALSO</A>
+<P>
+<B>pcre(3)</B>, Perl 5 documentation
+</P>
+<LI><A NAME="SEC6" HREF="#TOC1">DIAGNOSTICS</A>
+<P>
+Exit status is 0 if any matches were found, 1 if no matches were found, and 2
+for syntax errors or inacessible files (even if matches were found).
+</P>
+<LI><A NAME="SEC7" HREF="#TOC1">AUTHOR</A>
+<P>
+Philip Hazel &#60;ph10@cam.ac.uk&#62;
+<BR>
+Copyright (c) 1997-1999 University of Cambridge.
diff --git a/srclib/pcre/doc/pgrep.txt b/srclib/pcre/doc/pgrep.txt
new file mode 100644
index 0000000000..bcd08c0aab
--- /dev/null
+++ b/srclib/pcre/doc/pgrep.txt
@@ -0,0 +1,86 @@
+NAME
+     pgrep - a grep with Perl-compatible regular expressions.
+
+
+
+SYNOPSIS
+     pgrep [-Vchilnsvx] pattern [file] ...
+
+
+
+DESCRIPTION
+     pgrep searches files for character patterns, in the same way
+     as  other  grep  commands  do,  but it uses the PCRE regular
+     expression library to support patterns that  are  compatible
+     with  the  regular  expressions of Perl 5. See pcre(3) for a
+     full description of syntax and semantics.
+
+     If no files are specified, pgrep reads the  standard  input.
+     By  default, each line that matches the pattern is copied to
+     the standard output, and if there is more than one file, the
+     file  name  is  printed before each line of output. However,
+     there are options that can change how pgrep behaves.
+
+     Lines are limited to BUFSIZ characters. BUFSIZ is defined in
+     <stdio.h>.  The newline character is removed from the end of
+     each line before it is matched against the pattern.
+
+
+
+OPTIONS
+     -V        Write the version number of the PCRE library being
+               used to the standard error stream.
+
+     -c        Do not print individual lines; instead just  print
+               a  count  of the number of lines that would other-
+               wise have  been  printed.  If  several  files  are
+               given, a count is printed for each of them.
+
+     -h        Suppress printing of filenames when searching mul-
+               tiple files.
+
+     -i        Ignore upper/lower case distinctions  during  com-
+               parisons.
+
+     -l        Instead of printing lines  from  the  files,  just
+               print the names of the files containing lines that
+               would have been printed. Each file name is printed
+               once, on a separate line.
+
+     -n        Precede each line by its line number in the file.
+
+     -s        Work silently, that  is,  display  nothing  except
+               error messages.  The exit status indicates whether
+               any matches were found.
+
+     -v        Invert the sense of the match, so that lines which
+               do not match the pattern are now the ones that are
+               found.
+
+     -x        Force the pattern to be anchored  (it  must  start
+               matching  at  the  beginning  of  the line) and in
+               addition, require it to  match  the  entire  line.
+               This is equivalent to having ^ and $ characters at
+               the start and end of each  alternative  branch  in
+               the regular expression.
+
+
+
+SEE ALSO
+     pcre(3), Perl 5 documentation
+
+
+
+
+
+DIAGNOSTICS
+     Exit status is 0 if any matches were found, 1 if no  matches
+     were  found,  and  2  for syntax errors or inacessible files
+     (even if matches were found).
+
+
+
+AUTHOR
+     Philip Hazel <ph10@cam.ac.uk>
+     Copyright (c) 1997-1999 University of Cambridge.
+
diff --git a/srclib/pcre/get.c b/srclib/pcre/get.c
new file mode 100644
index 0000000000..035668e301
--- /dev/null
+++ b/srclib/pcre/get.c
@@ -0,0 +1,189 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+/*
+This is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language. See
+the file Tech.Notes for some information on the internals.
+
+Written by: Philip Hazel <ph10@cam.ac.uk>
+
+           Copyright (c) 1997-1999 University of Cambridge
+
+-----------------------------------------------------------------------------
+Permission is granted to anyone to use this software for any purpose on any
+computer system, and to redistribute it freely, subject to the following
+restrictions:
+
+1. This software is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+2. The origin of this software must not be misrepresented, either by
+   explicit claim or by omission.
+
+3. Altered versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+
+4. If PCRE is embedded in any software that is released under the GNU
+   General Purpose Licence (GPL), then the terms of that licence shall
+   supersede any condition above with which it is incompatible.
+-----------------------------------------------------------------------------
+*/
+
+/* This module contains some convenience functions for extracting substrings
+from the subject string after a regex match has succeeded. The original idea
+for these functions came from Scott Wimer <scottw@cgibuilder.com>. */
+
+
+/* Include the internals header, which itself includes Standard C headers plus
+the external pcre header. */
+
+#include "internal.h"
+
+
+
+/*************************************************
+*      Copy captured string to given buffer      *
+*************************************************/
+
+/* This function copies a single captured substring into a given buffer.
+Note that we use memcpy() rather than strncpy() in case there are binary zeros
+in the string.
+
+Arguments:
+  subject        the subject string that was matched
+  ovector        pointer to the offsets table
+  stringcount    the number of substrings that were captured
+                   (i.e. the yield of the pcre_exec call, unless
+                   that was zero, in which case it should be 1/3
+                   of the offset table size)
+  stringnumber   the number of the required substring
+  buffer         where to put the substring
+  size           the size of the buffer
+
+Returns:         if successful:
+                   the length of the copied string, not including the zero
+                   that is put on the end; can be zero
+                 if not successful:
+                   PCRE_ERROR_NOMEMORY (-6) buffer too small
+                   PCRE_ERROR_NOSUBSTRING (-7) no such captured substring
+*/
+
+int
+pcre_copy_substring(const char *subject, int *ovector, int stringcount,
+  int stringnumber, char *buffer, int size)
+{
+int yield;
+if (stringnumber < 0 || stringnumber >= stringcount)
+  return PCRE_ERROR_NOSUBSTRING;
+stringnumber *= 2;
+yield = ovector[stringnumber+1] - ovector[stringnumber];
+if (size < yield + 1) return PCRE_ERROR_NOMEMORY;
+memcpy(buffer, subject + ovector[stringnumber], yield);
+buffer[yield] = 0;
+return yield;
+}
+
+
+
+/*************************************************
+*      Copy all captured strings to new store    *
+*************************************************/
+
+/* This function gets one chunk of store and builds a list of pointers and all
+of the captured substrings in it. A NULL pointer is put on the end of the list.
+
+Arguments:
+  subject        the subject string that was matched
+  ovector        pointer to the offsets table
+  stringcount    the number of substrings that were captured
+                   (i.e. the yield of the pcre_exec call, unless
+                   that was zero, in which case it should be 1/3
+                   of the offset table size)
+  listptr        set to point to the list of pointers
+
+Returns:         if successful: 0
+                 if not successful:
+                   PCRE_ERROR_NOMEMORY (-6) failed to get store
+*/
+
+int
+pcre_get_substring_list(const char *subject, int *ovector, int stringcount,
+  const char ***listptr)
+{
+int i;
+int size = sizeof(char *);
+int double_count = stringcount * 2;
+char **stringlist;
+char *p;
+
+for (i = 0; i < double_count; i += 2)
+  size += sizeof(char *) + ovector[i+1] - ovector[i] + 1;
+
+stringlist = (char **)(pcre_malloc)(size);
+if (stringlist == NULL) return PCRE_ERROR_NOMEMORY;
+
+*listptr = (const char **)stringlist;
+p = (char *)(stringlist + stringcount + 1);
+
+for (i = 0; i < double_count; i += 2)
+  {
+  int len = ovector[i+1] - ovector[i];
+  memcpy(p, subject + ovector[i], len);
+  *stringlist++ = p;
+  p += len;
+  *p++ = 0;
+  }
+
+*stringlist = NULL;
+return 0;
+}
+
+
+
+/*************************************************
+*      Copy captured string to new store         *
+*************************************************/
+
+/* This function copies a single captured substring into a piece of new
+store
+
+Arguments:
+  subject        the subject string that was matched
+  ovector        pointer to the offsets table
+  stringcount    the number of substrings that were captured
+                   (i.e. the yield of the pcre_exec call, unless
+                   that was zero, in which case it should be 1/3
+                   of the offset table size)
+  stringnumber   the number of the required substring
+  stringptr      where to put a pointer to the substring
+
+Returns:         if successful:
+                   the length of the string, not including the zero that
+                   is put on the end; can be zero
+                 if not successful:
+                   PCRE_ERROR_NOMEMORY (-6) failed to get store
+                   PCRE_ERROR_NOSUBSTRING (-7) substring not present
+*/
+
+int
+pcre_get_substring(const char *subject, int *ovector, int stringcount,
+  int stringnumber, const char **stringptr)
+{
+int yield;
+char *substring;
+if (stringnumber < 0 || stringnumber >= stringcount)
+  return PCRE_ERROR_NOSUBSTRING;
+stringnumber *= 2;
+yield = ovector[stringnumber+1] - ovector[stringnumber];
+substring = (char *)(pcre_malloc)(yield + 1);
+if (substring == NULL) return PCRE_ERROR_NOMEMORY;
+memcpy(substring, subject + ovector[stringnumber], yield);
+substring[yield] = 0;
+*stringptr = substring;
+return yield;
+}
+
+/* End of get.c */
diff --git a/srclib/pcre/install-sh b/srclib/pcre/install-sh
new file mode 100755
index 0000000000..e9de23842d
--- /dev/null
+++ b/srclib/pcre/install-sh
@@ -0,0 +1,251 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0
diff --git a/srclib/pcre/internal.h b/srclib/pcre/internal.h
new file mode 100644
index 0000000000..91ff3018f1
--- /dev/null
+++ b/srclib/pcre/internal.h
@@ -0,0 +1,360 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+
+/* This is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language. See
+the file Tech.Notes for some information on the internals.
+
+Written by: Philip Hazel <ph10@cam.ac.uk>
+
+           Copyright (c) 1997-2000 University of Cambridge
+
+-----------------------------------------------------------------------------
+Permission is granted to anyone to use this software for any purpose on any
+computer system, and to redistribute it freely, subject to the following
+restrictions:
+
+1. This software is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+2. The origin of this software must not be misrepresented, either by
+   explicit claim or by omission.
+
+3. Altered versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+
+4. If PCRE is embedded in any software that is released under the GNU
+   General Purpose Licence (GPL), then the terms of that licence shall
+   supersede any condition above with which it is incompatible.
+-----------------------------------------------------------------------------
+*/
+
+/* This header contains definitions that are shared between the different
+modules, but which are not relevant to the outside. */
+
+/* Get the definitions provided by running "configure" */
+
+#include "config.h"
+
+/* To cope with SunOS4 and other systems that lack memmove() but have bcopy(),
+define a macro for memmove() if HAVE_MEMMOVE is false. */
+
+#if ! HAVE_MEMMOVE
+#undef  memmove        /* some systems may have a macro */
+#define memmove(a, b, c) bcopy(b, a, c)
+#endif
+
+/* Standard C headers plus the external interface definition */
+
+#include <ctype.h>
+#include <limits.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "pcre.h"
+
+/* In case there is no definition of offsetof() provided - though any proper
+Standard C system should have one. */
+
+#ifndef offsetof
+#define offsetof(p_type,field) ((size_t)&(((p_type *)0)->field))
+#endif
+
+/* These are the public options that can change during matching. */
+
+#define PCRE_IMS (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL)
+
+/* Private options flags start at the most significant end of the four bytes,
+but skip the top bit so we can use ints for convenience without getting tangled
+with negative values. The public options defined in pcre.h start at the least
+significant end. Make sure they don't overlap, though now that we have expanded
+to four bytes there is plenty of space. */
+
+#define PCRE_FIRSTSET      0x40000000  /* first_char is set */
+#define PCRE_REQCHSET      0x20000000  /* req_char is set */
+#define PCRE_STARTLINE     0x10000000  /* start after \n for multiline */
+#define PCRE_INGROUP       0x08000000  /* compiling inside a group */
+#define PCRE_ICHANGED      0x04000000  /* i option changes within regex */
+
+/* Options for the "extra" block produced by pcre_study(). */
+
+#define PCRE_STUDY_MAPPED   0x01     /* a map of starting chars exists */
+
+/* Masks for identifying the public options which are permitted at compile
+time, run time or study time, respectively. */
+
+#define PUBLIC_OPTIONS \
+  (PCRE_CASELESS|PCRE_EXTENDED|PCRE_ANCHORED|PCRE_MULTILINE| \
+   PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY)
+
+#define PUBLIC_EXEC_OPTIONS \
+  (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY)
+
+#define PUBLIC_STUDY_OPTIONS 0   /* None defined */
+
+/* Magic number to provide a small check against being handed junk. */
+
+#define MAGIC_NUMBER  0x50435245UL   /* 'PCRE' */
+
+/* Miscellaneous definitions */
+
+typedef int BOOL;
+
+#define FALSE   0
+#define TRUE    1
+
+/* These are escaped items that aren't just an encoding of a particular data
+value such as \n. They must have non-zero values, as check_escape() returns
+their negation. Also, they must appear in the same order as in the opcode
+definitions below, up to ESC_z. The final one must be ESC_REF as subsequent
+values are used for \1, \2, \3, etc. There is a test in the code for an escape
+greater than ESC_b and less than ESC_X to detect the types that may be
+repeated. If any new escapes are put in-between that don't consume a character,
+that code will have to change. */
+
+enum { ESC_A = 1, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s, ESC_W, ESC_w,
+       ESC_Z, ESC_z, ESC_REF };
+
+/* Opcode table: OP_BRA must be last, as all values >= it are used for brackets
+that extract substrings. Starting from 1 (i.e. after OP_END), the values up to
+OP_EOD must correspond in order to the list of escapes immediately above. */
+
+enum {
+  OP_END,            /* End of pattern */
+
+  /* Values corresponding to backslashed metacharacters */
+
+  OP_SOD,            /* Start of data: \A */
+  OP_NOT_WORD_BOUNDARY,  /* \B */
+  OP_WORD_BOUNDARY,      /* \b */
+  OP_NOT_DIGIT,          /* \D */
+  OP_DIGIT,              /* \d */
+  OP_NOT_WHITESPACE,     /* \S */
+  OP_WHITESPACE,         /* \s */
+  OP_NOT_WORDCHAR,       /* \W */
+  OP_WORDCHAR,           /* \w */
+  OP_EODN,           /* End of data or \n at end of data: \Z. */
+  OP_EOD,            /* End of data: \z */
+
+  OP_OPT,            /* Set runtime options */
+  OP_CIRC,           /* Start of line - varies with multiline switch */
+  OP_DOLL,           /* End of line - varies with multiline switch */
+  OP_ANY,            /* Match any character */
+  OP_CHARS,          /* Match string of characters */
+  OP_NOT,            /* Match anything but the following char */
+
+  OP_STAR,           /* The maximizing and minimizing versions of */
+  OP_MINSTAR,        /* all these opcodes must come in pairs, with */
+  OP_PLUS,           /* the minimizing one second. */
+  OP_MINPLUS,        /* This first set applies to single characters */
+  OP_QUERY,
+  OP_MINQUERY,
+  OP_UPTO,           /* From 0 to n matches */
+  OP_MINUPTO,
+  OP_EXACT,          /* Exactly n matches */
+
+  OP_NOTSTAR,        /* The maximizing and minimizing versions of */
+  OP_NOTMINSTAR,     /* all these opcodes must come in pairs, with */
+  OP_NOTPLUS,        /* the minimizing one second. */
+  OP_NOTMINPLUS,     /* This first set applies to "not" single characters */
+  OP_NOTQUERY,
+  OP_NOTMINQUERY,
+  OP_NOTUPTO,        /* From 0 to n matches */
+  OP_NOTMINUPTO,
+  OP_NOTEXACT,       /* Exactly n matches */
+
+  OP_TYPESTAR,       /* The maximizing and minimizing versions of */
+  OP_TYPEMINSTAR,    /* all these opcodes must come in pairs, with */
+  OP_TYPEPLUS,       /* the minimizing one second. These codes must */
+  OP_TYPEMINPLUS,    /* be in exactly the same order as those above. */
+  OP_TYPEQUERY,      /* This set applies to character types such as \d */
+  OP_TYPEMINQUERY,
+  OP_TYPEUPTO,       /* From 0 to n matches */
+  OP_TYPEMINUPTO,
+  OP_TYPEEXACT,      /* Exactly n matches */
+
+  OP_CRSTAR,         /* The maximizing and minimizing versions of */
+  OP_CRMINSTAR,      /* all these opcodes must come in pairs, with */
+  OP_CRPLUS,         /* the minimizing one second. These codes must */
+  OP_CRMINPLUS,      /* be in exactly the same order as those above. */
+  OP_CRQUERY,        /* These are for character classes and back refs */
+  OP_CRMINQUERY,
+  OP_CRRANGE,        /* These are different to the three seta above. */
+  OP_CRMINRANGE,
+
+  OP_CLASS,          /* Match a character class */
+  OP_REF,            /* Match a back reference */
+  OP_RECURSE,        /* Match this pattern recursively */
+
+  OP_ALT,            /* Start of alternation */
+  OP_KET,            /* End of group that doesn't have an unbounded repeat */
+  OP_KETRMAX,        /* These two must remain together and in this */
+  OP_KETRMIN,        /* order. They are for groups the repeat for ever. */
+
+  /* The assertions must come before ONCE and COND */
+
+  OP_ASSERT,         /* Positive lookahead */
+  OP_ASSERT_NOT,     /* Negative lookahead */
+  OP_ASSERTBACK,     /* Positive lookbehind */
+  OP_ASSERTBACK_NOT, /* Negative lookbehind */
+  OP_REVERSE,        /* Move pointer back - used in lookbehind assertions */
+
+  /* ONCE and COND must come after the assertions, with ONCE first, as there's
+  a test for >= ONCE for a subpattern that isn't an assertion. */
+
+  OP_ONCE,           /* Once matched, don't back up into the subpattern */
+  OP_COND,           /* Conditional group */
+  OP_CREF,           /* Used to hold an extraction string number */
+
+  OP_BRAZERO,        /* These two must remain together and in this */
+  OP_BRAMINZERO,     /* order. */
+
+  OP_BRA             /* This and greater values are used for brackets that
+                        extract substrings. */
+};
+
+/* The highest extraction number. This is limited by the number of opcodes
+left after OP_BRA, i.e. 255 - OP_BRA. We actually set it somewhat lower. */
+
+#define EXTRACT_MAX  99
+
+/* The texts of compile-time error messages are defined as macros here so that
+they can be accessed by the POSIX wrapper and converted into error codes.  Yes,
+I could have used error codes in the first place, but didn't feel like changing
+just to accommodate the POSIX wrapper. */
+
+#define ERR1  "\\ at end of pattern"
+#define ERR2  "\\c at end of pattern"
+#define ERR3  "unrecognized character follows \\"
+#define ERR4  "numbers out of order in {} quantifier"
+#define ERR5  "number too big in {} quantifier"
+#define ERR6  "missing terminating ] for character class"
+#define ERR7  "invalid escape sequence in character class"
+#define ERR8  "range out of order in character class"
+#define ERR9  "nothing to repeat"
+#define ERR10 "operand of unlimited repeat could match the empty string"
+#define ERR11 "internal error: unexpected repeat"
+#define ERR12 "unrecognized character after (?"
+#define ERR13 "too many capturing parenthesized sub-patterns"
+#define ERR14 "missing )"
+#define ERR15 "back reference to non-existent subpattern"
+#define ERR16 "erroffset passed as NULL"
+#define ERR17 "unknown option bit(s) set"
+#define ERR18 "missing ) after comment"
+#define ERR19 "too many sets of parentheses"
+#define ERR20 "regular expression too large"
+#define ERR21 "failed to get memory"
+#define ERR22 "unmatched parentheses"
+#define ERR23 "internal error: code overflow"
+#define ERR24 "unrecognized character after (?<"
+#define ERR25 "lookbehind assertion is not fixed length"
+#define ERR26 "malformed number after (?("
+#define ERR27 "conditional group contains more than two branches"
+#define ERR28 "assertion expected after (?("
+#define ERR29 "(?p must be followed by )"
+#define ERR30 "unknown POSIX class name"
+#define ERR31 "POSIX collating elements are not supported"
+
+/* All character handling must be done as unsigned characters. Otherwise there
+are problems with top-bit-set characters and functions such as isspace().
+However, we leave the interface to the outside world as char *, because that
+should make things easier for callers. We define a short type for unsigned char
+to save lots of typing. I tried "uchar", but it causes problems on Digital
+Unix, where it is defined in sys/types, so use "uschar" instead. */
+
+typedef unsigned char uschar;
+
+/* The real format of the start of the pcre block; the actual code vector
+runs on as long as necessary after the end. */
+
+typedef struct real_pcre {
+  unsigned long int magic_number;
+  size_t size;
+  const unsigned char *tables;
+  unsigned long int options;
+  uschar top_bracket;
+  uschar top_backref;
+  uschar first_char;
+  uschar req_char;
+  uschar code[1];
+} real_pcre;
+
+/* The real format of the extra block returned by pcre_study(). */
+
+typedef struct real_pcre_extra {
+  uschar options;
+  uschar start_bits[32];
+} real_pcre_extra;
+
+
+/* Structure for passing "static" information around between the functions
+doing the compiling, so that they are thread-safe. */
+
+typedef struct compile_data {
+  const uschar *lcc;            /* Points to lower casing table */
+  const uschar *fcc;            /* Points to case-flipping table */
+  const uschar *cbits;          /* Points to character type table */
+  const uschar *ctypes;         /* Points to table of type maps */
+} compile_data;
+
+/* Structure for passing "static" information around between the functions
+doing the matching, so that they are thread-safe. */
+
+typedef struct match_data {
+  int    errorcode;             /* As it says */
+  int   *offset_vector;         /* Offset vector */
+  int    offset_end;            /* One past the end */
+  int    offset_max;            /* The maximum usable for return data */
+  const uschar *lcc;            /* Points to lower casing table */
+  const uschar *ctypes;         /* Points to table of type maps */
+  BOOL   offset_overflow;       /* Set if too many extractions */
+  BOOL   notbol;                /* NOTBOL flag */
+  BOOL   noteol;                /* NOTEOL flag */
+  BOOL   endonly;               /* Dollar not before final \n */
+  BOOL   notempty;              /* Empty string match not wanted */
+  const uschar *start_pattern;  /* For use when recursing */
+  const uschar *start_subject;  /* Start of the subject string */
+  const uschar *end_subject;    /* End of the subject string */
+  const uschar *start_match;    /* Start of this match attempt */
+  const uschar *end_match_ptr;  /* Subject position at end match */
+  int    end_offset_top;        /* Highwater mark at end of match */
+} match_data;
+
+/* Bit definitions for entries in the pcre_ctypes table. */
+
+#define ctype_space   0x01
+#define ctype_letter  0x02
+#define ctype_digit   0x04
+#define ctype_xdigit  0x08
+#define ctype_word    0x10   /* alphameric or '_' */
+#define ctype_meta    0x80   /* regexp meta char or zero (end pattern) */
+
+/* Offsets for the bitmap tables in pcre_cbits. Each table contains a set
+of bits for a class map. Some classes are built by combining these tables. */
+
+#define cbit_space     0      /* [:space:] or \s */
+#define cbit_xdigit   32      /* [:xdigit:] */
+#define cbit_digit    64      /* [:digit:] or \d */
+#define cbit_upper    96      /* [:upper:] */
+#define cbit_lower   128      /* [:lower:] */
+#define cbit_word    160      /* [:word:] or \w */
+#define cbit_graph   192      /* [:graph:] */
+#define cbit_print   224      /* [:print:] */
+#define cbit_punct   256      /* [:punct:] */
+#define cbit_cntrl   288      /* [:cntrl:] */
+#define cbit_length  320      /* Length of the cbits table */
+
+/* Offsets of the various tables from the base tables pointer, and
+total length. */
+
+#define lcc_offset      0
+#define fcc_offset    256
+#define cbits_offset  512
+#define ctypes_offset (cbits_offset + cbit_length)
+#define tables_length (ctypes_offset + 256)
+
+/* End of internal.h */
diff --git a/srclib/pcre/ltconfig b/srclib/pcre/ltconfig
new file mode 100755
index 0000000000..a01334f921
--- /dev/null
+++ b/srclib/pcre/ltconfig
@@ -0,0 +1,3078 @@
+#! /bin/sh
+
+# ltconfig - Create a system-specific libtool.
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A lot of this script is taken from autoconf-2.10.
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+echo=echo
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec "$SHELL" "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# Find the correct PATH separator.  Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+  UNAME=${UNAME-`uname 2>/dev/null`}
+  case X$UNAME in
+    *-DOS) PATH_SEPARATOR=';' ;;
+    *)     PATH_SEPARATOR=':' ;;
+  esac
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test "X${echo_test_string+set}" != Xset; then
+  # find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+       echo_test_string="`eval $cmd`" &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" != 'X\t' ||
+   test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+  for dir in $PATH /usr/ucb; do
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running ltconfig again with it.
+      ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
+    else
+      # Try using printf.
+      echo='printf "%s\n"'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
+	   test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+	CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
+	   test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "$0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# The name of this program.
+progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
+
+# Constants:
+PROGRAM=ltconfig
+PACKAGE=libtool
+VERSION=1.3.4
+TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)"
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+rm="rm -f"
+
+help="Try \`$progname --help' for more information."
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+enable_shared=yes
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+enable_static=yes
+enable_fast_install=yes
+enable_dlopen=unknown
+enable_win32_dll=no
+ltmain=
+silent=
+srcdir=
+ac_config_guess=
+ac_config_sub=
+host=
+nonopt=
+ofile="$default_ofile"
+verify_host=yes
+with_gcc=no
+with_gnu_ld=no
+need_locks=yes
+ac_ext=c
+objext=o
+libext=a
+exeext=
+cache_file=
+
+old_AR="$AR"
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+old_CPPFLAGS="$CPPFLAGS"
+old_LDFLAGS="$LDFLAGS"
+old_LD="$LD"
+old_LN_S="$LN_S"
+old_LIBS="$LIBS"
+old_NM="$NM"
+old_RANLIB="$RANLIB"
+old_DLLTOOL="$DLLTOOL"
+old_OBJDUMP="$OBJDUMP"
+old_AS="$AS"
+
+# Parse the command line options.
+args=
+prev=
+for option
+do
+  case "$option" in
+  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    eval "$prev=\$option"
+    prev=
+    continue
+  fi
+
+  case "$option" in
+  --help) cat <<EOM
+Usage: $progname [OPTION]... [HOST [LTMAIN]]
+
+Generate a system-specific libtool script.
+
+    --debug                enable verbose shell tracing
+    --disable-shared       do not build shared libraries
+    --disable-static       do not build static libraries
+    --disable-fast-install do not optimize for fast installation
+    --enable-dlopen        enable dlopen support
+    --enable-win32-dll     enable building dlls on win32 hosts
+    --help                 display this help and exit
+    --no-verify            do not verify that HOST is a valid host type
+-o, --output=FILE          specify the output file [default=$default_ofile]
+    --quiet                same as \`--silent'
+    --silent               do not print informational messages
+    --srcdir=DIR           find \`config.guess' in DIR
+    --version              output version information and exit
+    --with-gcc             assume that the GNU C compiler will be used
+    --with-gnu-ld          assume that the C compiler uses the GNU linker
+    --disable-lock         disable file locking
+    --cache-file=FILE      configure cache file
+
+LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
+that provides basic libtool functionality.
+
+HOST is the canonical host system name [default=guessed].
+EOM
+  exit 0
+  ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --disable-shared) enable_shared=no ;;
+
+  --disable-static) enable_static=no ;;
+
+  --disable-fast-install) enable_fast_install=no ;;
+
+  --enable-dlopen) enable_dlopen=yes ;;
+
+  --enable-win32-dll) enable_win32_dll=yes ;;
+
+  --quiet | --silent) silent=yes ;;
+
+  --srcdir) prev=srcdir ;;
+  --srcdir=*) srcdir="$optarg" ;;
+
+  --no-verify) verify_host=no ;;
+
+  --output | -o) prev=ofile ;;
+  --output=*) ofile="$optarg" ;;
+
+  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;
+
+  --with-gcc) with_gcc=yes ;;
+  --with-gnu-ld) with_gnu_ld=yes ;;
+
+  --disable-lock) need_locks=no ;;
+
+  --cache-file=*) cache_file="$optarg" ;;
+
+  -*)
+    echo "$progname: unrecognized option \`$option'" 1>&2
+    echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    if test -z "$ltmain"; then
+      ltmain="$option"
+    elif test -z "$host"; then
+# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
+#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
+#        echo "$progname: warning \`$option' is not a valid host type" 1>&2
+#      fi
+      host="$option"
+    else
+      echo "$progname: too many arguments" 1>&2
+      echo "$help" 1>&2
+      exit 1
+    fi ;;
+  esac
+done
+
+if test -z "$ltmain"; then
+  echo "$progname: you must specify a LTMAIN file" 1>&2
+  echo "$help" 1>&2
+  exit 1
+fi
+
+if test ! -f "$ltmain"; then
+  echo "$progname: \`$ltmain' does not exist" 1>&2
+  echo "$help" 1>&2
+  exit 1
+fi
+
+# Quote any args containing shell metacharacters.
+ltconfig_args=
+for arg
+do
+  case "$arg" in
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ltconfig_args="$ltconfig_args '$arg'" ;;
+  *) ltconfig_args="$ltconfig_args $arg" ;;
+  esac
+done
+
+# A relevant subset of AC_INIT.
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 5 compiler messages saved in config.log
+# 6 checking for... messages and results
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>>./config.log
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
+if test "X${LANG+set}"   = Xset; then LANG=C;   export LANG;   fi
+
+if test -n "$cache_file" && test -r "$cache_file"; then
+  echo "loading cache $cache_file within ltconfig"
+  . $cache_file
+fi
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+if test -z "$srcdir"; then
+  # Assume the source directory is the same one as the path to LTMAIN.
+  srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
+  test "$srcdir" = "$ltmain" && srcdir=.
+fi
+
+trap "$rm conftest*; exit 1" 1 2 15
+if test "$verify_host" = yes; then
+  # Check for config.guess and config.sub.
+  ac_aux_dir=
+  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+    if test -f $ac_dir/config.guess; then
+      ac_aux_dir=$ac_dir
+      break
+    fi
+  done
+  if test -z "$ac_aux_dir"; then
+    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
+    echo "$help" 1>&2
+    exit 1
+  fi
+  ac_config_guess=$ac_aux_dir/config.guess
+  ac_config_sub=$ac_aux_dir/config.sub
+
+  # Make sure we can run config.sub.
+  if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
+  else
+    echo "$progname: cannot run $ac_config_sub" 1>&2
+    echo "$help" 1>&2
+    exit 1
+  fi
+
+  echo $ac_n "checking host system type""... $ac_c" 1>&6
+
+  host_alias=$host
+  case "$host_alias" in
+  "")
+    if host_alias=`$SHELL $ac_config_guess`; then :
+    else
+      echo "$progname: cannot guess host type; you must specify one" 1>&2
+      echo "$help" 1>&2
+      exit 1
+    fi ;;
+  esac
+  host=`$SHELL $ac_config_sub $host_alias`
+  echo "$ac_t$host" 1>&6
+
+  # Make sure the host verified.
+  test -z "$host" && exit 1
+
+elif test -z "$host"; then
+  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
+  echo "$help" 1>&2
+  exit 1
+else
+  host_alias=$host
+fi
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case "$host_os" in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+case "$host_os" in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR cru $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+# Set a sane default for `AR'.
+test -z "$AR" && AR=ar
+
+# Set a sane default for `OBJDUMP'.
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+# If RANLIB is not set, then run the test.
+if test "${RANLIB+set}" != "set"; then
+  result=no
+
+  echo $ac_n "checking for ranlib... $ac_c" 1>&6
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+  for dir in $PATH; do
+    test -z "$dir" && dir=.
+    if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then
+      RANLIB="ranlib"
+      result="ranlib"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  echo "$ac_t$result" 1>&6
+fi
+
+if test -n "$RANLIB"; then
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+fi
+
+# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin.
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$AS" && AS=as
+
+# Check to see if we are using GCC.
+if test "$with_gcc" != yes || test -z "$CC"; then
+  # If CC is not set, then try to find GCC or a usable CC.
+  if test -z "$CC"; then
+    echo $ac_n "checking for gcc... $ac_c" 1>&6
+    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    for dir in $PATH; do
+      test -z "$dir" && dir=.
+      if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then
+	CC="gcc"
+	break
+      fi
+    done
+    IFS="$save_ifs"
+
+    if test -n "$CC"; then
+      echo "$ac_t$CC" 1>&6
+    else
+      echo "$ac_t"no 1>&6
+    fi
+  fi
+
+  # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
+  if test -z "$CC"; then
+    echo $ac_n "checking for cc... $ac_c" 1>&6
+    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    cc_rejected=no
+    for dir in $PATH; do
+      test -z "$dir" && dir=.
+      if test -f $dir/cc || test -f $dir/cc$ac_exeext; then
+	if test "$dir/cc" = "/usr/ucb/cc"; then
+	  cc_rejected=yes
+	  continue
+	fi
+	CC="cc"
+	break
+      fi
+    done
+    IFS="$save_ifs"
+    if test $cc_rejected = yes; then
+      # We found a bogon in the path, so make sure we never use it.
+      set dummy $CC
+      shift
+      if test $# -gt 0; then
+	# We chose a different compiler from the bogus one.
+	# However, it has the same name, so the bogon will be chosen
+	# first if we set CC to just the name; use the full file name.
+	shift
+	set dummy "$dir/cc" "$@"
+	shift
+	CC="$@"
+      fi
+    fi
+
+    if test -n "$CC"; then
+      echo "$ac_t$CC" 1>&6
+    else
+      echo "$ac_t"no 1>&6
+    fi
+
+    if test -z "$CC"; then
+      echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
+      exit 1
+    fi
+  fi
+
+  # Now see if the compiler is really GCC.
+  with_gcc=no
+  echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
+  echo "$progname:581: checking whether we are using GNU C" >&5
+
+  $rm conftest.c
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+  if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:589: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+    with_gcc=yes
+  fi
+  $rm conftest.c
+  echo "$ac_t$with_gcc" 1>&6
+fi
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="$2"
+
+echo $ac_n "checking for object suffix... $ac_c" 1>&6
+$rm conftest*
+echo 'int i = 1;' > conftest.c
+echo "$progname:603: checking for object suffix" >& 5
+if { (eval echo $progname:604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
+  # Append any warnings to the config.log.
+  cat conftest.err 1>&5
+
+  for ac_file in conftest.*; do
+    case $ac_file in
+    *.c) ;;
+    *) objext=`echo $ac_file | sed -e s/conftest.//` ;;
+    esac
+  done
+else
+  cat conftest.err 1>&5
+  echo "$progname: failed program was:" >&5
+  cat conftest.c >&5
+fi
+$rm conftest*
+echo "$ac_t$objext" 1>&6
+
+echo $ac_n "checking for executable suffix... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_exeext="no"
+  $rm conftest*
+  echo 'main () { return 0; }' > conftest.c
+  echo "$progname:629: checking for executable suffix" >& 5
+  if { (eval echo $progname:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>conftest.err; }; then
+    # Append any warnings to the config.log.
+    cat conftest.err 1>&5
+
+    for ac_file in conftest.*; do
+      case $ac_file in
+      *.c | *.err | *.$objext ) ;;
+      *) ac_cv_exeext=.`echo $ac_file | sed -e s/conftest.//` ;;
+      esac
+    done
+  else
+    cat conftest.err 1>&5
+    echo "$progname: failed program was:" >&5
+    cat conftest.c >&5
+  fi
+  $rm conftest*
+fi
+if test "X$ac_cv_exeext" = Xno; then
+  exeext=""
+else
+  exeext="$ac_cv_exeext"
+fi
+echo "$ac_t$ac_cv_exeext" 1>&6
+
+echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
+pic_flag=
+special_shlib_compile_flags=
+wl=
+link_static_flag=
+no_builtin_flag=
+
+if test "$with_gcc" = yes; then
+  wl='-Wl,'
+  link_static_flag='-static'
+
+  case "$host_os" in
+  beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+    # PIC is the default for these OSes.
+    ;;
+  aix*)
+    # Below there is a dirty hack to force normal static linking with -ldl
+    # The problem is because libdl dynamically linked with both libc and
+    # libC (AIX C++ library), which obviously doesn't included in libraries
+    # list by gcc. This cause undefined symbols with -static flags.
+    # This hack allows C programs to be linked with "-static -ldl", but
+    # we not sure about C++ programs.
+    link_static_flag="$link_static_flag ${wl}-lC"
+    ;;
+  cygwin* | mingw* | os2*)
+    # We can build DLLs from non-PIC.
+    ;;
+  amigaos*)
+    # FIXME: we need at least 68020 code to build shared libraries, but
+    # adding the `-m68020' flag to GCC prevents building anything better,
+    # like `-m68040'.
+    pic_flag='-m68020 -resident32 -malways-restore-a4'
+    ;;
+  sysv4*MP*)
+    if test -d /usr/nec; then
+       pic_flag=-Kconform_pic
+    fi
+    ;;
+  *)
+    pic_flag='-fPIC'
+    ;;
+  esac
+else
+  # PORTME Check for PIC flags for the system compiler.
+  case "$host_os" in
+  aix3* | aix4*)
+    # All AIX code is PIC.
+    link_static_flag='-bnso -bI:/lib/syscalls.exp'
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    # Is there a better link_static_flag that works with the bundled CC?
+    wl='-Wl,'
+    link_static_flag="${wl}-a ${wl}archive"
+    pic_flag='+Z'
+    ;;
+
+  irix5* | irix6*)
+    wl='-Wl,'
+    link_static_flag='-non_shared'
+    # PIC (with -KPIC) is the default.
+    ;;
+
+  cygwin* | mingw* | os2*)
+    # We can build DLLs from non-PIC.
+    ;;
+
+  osf3* | osf4* | osf5*)
+    # All OSF/1 code is PIC.
+    wl='-Wl,'
+    link_static_flag='-non_shared'
+    ;;
+
+  sco3.2v5*)
+    pic_flag='-Kpic'
+    link_static_flag='-dn'
+    special_shlib_compile_flags='-belf'
+    ;;
+
+  solaris*)
+    pic_flag='-KPIC'
+    link_static_flag='-Bstatic'
+    wl='-Wl,'
+    ;;
+
+  sunos4*)
+    pic_flag='-PIC'
+    link_static_flag='-Bstatic'
+    wl='-Qoption ld '
+    ;;
+
+  sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    pic_flag='-KPIC'
+    link_static_flag='-Bstatic'
+    wl='-Wl,'
+    ;;
+
+  uts4*)
+    pic_flag='-pic'
+    link_static_flag='-Bstatic'
+    ;;
+  sysv4*MP*)
+    if test -d /usr/nec ;then
+      pic_flag='-Kconform_pic'
+      link_static_flag='-Bstatic'
+    fi
+    ;;
+  *)
+    can_build_shared=no
+    ;;
+  esac
+fi
+
+if test -n "$pic_flag"; then
+  echo "$ac_t$pic_flag" 1>&6
+
+  # Check to make sure the pic_flag actually works.
+  echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS $pic_flag -DPIC"
+  echo "$progname:776: checking if $compiler PIC flag $pic_flag works" >&5
+  if { (eval echo $progname:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+    # Append any warnings to the config.log.
+    cat conftest.err 1>&5
+    
+    case "$host_os" in
+    hpux9* | hpux10* | hpux11*)
+      # On HP-UX, both CC and GCC only warn that PIC is supported... then they
+      # create non-PIC objects.  So, if there were any warnings, we assume that
+      # PIC is not supported.
+      if test -s conftest.err; then
+	echo "$ac_t"no 1>&6
+	can_build_shared=no
+	pic_flag=
+      else
+	echo "$ac_t"yes 1>&6
+	pic_flag=" $pic_flag"
+      fi
+      ;;
+    *)
+      echo "$ac_t"yes 1>&6
+      pic_flag=" $pic_flag"
+      ;;
+    esac
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    can_build_shared=no
+    pic_flag=
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+else
+  echo "$ac_t"none 1>&6
+fi
+
+# Check to see if options -o and -c are simultaneously supported by compiler
+echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+$rm conftest*
+echo "int some_variable = 0;" > conftest.c
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory.  Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
+save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -o out/conftest2.o"
+echo "$progname:829: checking if $compiler supports -c -o file.o" >&5
+if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then
+
+  # The compiler can only warn and ignore the option if not recognized
+  # So say no if there are warnings
+    if test -s out/conftest.err; then
+      echo "$ac_t"no 1>&6
+      compiler_c_o=no
+    else
+      echo "$ac_t"yes 1>&6
+      compiler_c_o=yes
+    fi
+else
+  # Append any errors to the config.log.
+  cat out/conftest.err 1>&5
+  compiler_c_o=no
+  echo "$ac_t"no 1>&6
+fi
+CFLAGS="$save_CFLAGS"
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
+
+if test x"$compiler_c_o" = x"yes"; then
+  # Check to see if we can write to a .lo
+  echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -c -o conftest.lo"
+  echo "$progname:862: checking if $compiler supports -c -o file.lo" >&5
+if { (eval echo $progname:863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
+
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+      if test -s conftest.err; then
+	echo "$ac_t"no 1>&6
+	compiler_o_lo=no
+      else
+	echo "$ac_t"yes 1>&6
+	compiler_o_lo=yes
+      fi
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    compiler_o_lo=no
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+else
+  compiler_o_lo=no
+fi
+
+# Check to see if we can do hard links to lock some files if needed
+hard_links="nottested"
+if test "$compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$ac_t$hard_links" 1>&6
+  $rm conftest*
+  if test "$hard_links" = no; then
+    echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+if test "$with_gcc" = yes; then
+  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c"
+  echo "$progname:914: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+  if { (eval echo $progname:915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
+
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+      if test -s conftest.err; then
+	echo "$ac_t"no 1>&6
+	compiler_rtti_exceptions=no
+      else
+	echo "$ac_t"yes 1>&6
+	compiler_rtti_exceptions=yes
+      fi
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    compiler_rtti_exceptions=no
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+
+  if test "$compiler_rtti_exceptions" = "yes"; then
+    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+  else
+    no_builtin_flag=' -fno-builtin'
+  fi
+  
+fi
+
+# Check for any special shared library compilation flags.
+if test -n "$special_shlib_compile_flags"; then
+  echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
+  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$special_shlib_compile_flags[ 	]" >/dev/null; then :
+  else
+    echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
+    can_build_shared=no
+  fi
+fi
+
+echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
+$rm conftest*
+echo 'main(){return(0);}' > conftest.c
+save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $link_static_flag"
+echo "$progname:958: checking if $compiler static flag $link_static_flag works" >&5
+if { (eval echo $progname:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  echo "$ac_t$link_static_flag" 1>&6
+else
+  echo "$ac_t"none 1>&6
+  link_static_flag=
+fi
+LDFLAGS="$save_LDFLAGS"
+$rm conftest*
+
+if test -z "$LN_S"; then
+  # Check to see if we can use ln -s, or we need hard links.
+  echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
+  $rm conftest.dat
+  if ln -s X conftest.dat 2>/dev/null; then
+    $rm conftest.dat
+    LN_S="ln -s"
+  else
+    LN_S=ln
+  fi
+  if test "$LN_S" = "ln -s"; then
+    echo "$ac_t"yes 1>&6
+  else
+    echo "$ac_t"no 1>&6
+  fi
+fi
+
+# Make sure LD is an absolute path.
+if test -z "$LD"; then
+  ac_prog=ld
+  if test "$with_gcc" = yes; then
+    # Check if gcc -print-prog-name=ld gives a path.
+    echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
+    echo "$progname:991: checking for ld used by GCC" >&5
+    ac_prog=`($CC -print-prog-name=ld) 2>&5`
+    case "$ac_prog" in
+    # Accept absolute paths.
+    [\\/]* | [A-Za-z]:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+    "")
+      # If it fails, then pretend we are not using GCC.
+      ac_prog=ld
+      ;;
+    *)
+      # If it is relative, then search for the first ld in PATH.
+      with_gnu_ld=unknown
+      ;;
+    esac
+  elif test "$with_gnu_ld" = yes; then
+    echo $ac_n "checking for GNU ld... $ac_c" 1>&6
+    echo "$progname:1015: checking for GNU ld" >&5
+  else
+    echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+    echo "$progname:1018: checking for non-GNU ld" >&5
+  fi
+
+  if test -z "$LD"; then
+    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    for ac_dir in $PATH; do
+      test -z "$ac_dir" && ac_dir=.
+      if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+	LD="$ac_dir/$ac_prog"
+	# Check to see if the program is GNU ld.  I'd rather use --version,
+	# but apparently some GNU ld's only accept -v.
+	# Break only if it was the GNU/non-GNU ld that we prefer.
+	if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	  test "$with_gnu_ld" != no && break
+	else
+	  test "$with_gnu_ld" != yes && break
+	fi
+      fi
+    done
+    IFS="$ac_save_ifs"
+  fi
+
+  if test -n "$LD"; then
+    echo "$ac_t$LD" 1>&6
+  else
+    echo "$ac_t"no 1>&6
+  fi
+
+  if test -z "$LD"; then
+    echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
+    exit 1
+  fi
+fi
+
+# Check to see if it really is or is not GNU ld.
+echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
+# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+echo "$ac_t$with_gnu_ld" 1>&6
+
+# See if the linker supports building shared libraries.
+echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
+
+allow_undefined_flag=
+no_undefined_flag=
+need_lib_prefix=unknown
+need_version=unknown
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+archive_cmds=
+archive_expsym_cmds=
+old_archive_from_new_cmds=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+thread_safe_flag_spec=
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+always_export_symbols=no
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+include_expsyms=
+# exclude_expsyms can be an egrep regular expression of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced.  Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+
+case "$host_os" in
+cygwin* | mingw*)
+  # FIXME: the MSVC++ port hasn't been tested in a loooong time
+  # When not using gcc, we currently assume that we are using
+  # Microsoft Visual C++.
+  if test "$with_gcc" != yes; then
+    with_gnu_ld=no
+  fi
+  ;;
+
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # If archive_cmds runs LD, not CC, wlarc should be empty
+  wlarc='${wl}'
+
+  # See if GNU ld supports shared libraries.
+  case "$host_os" in
+  aix3* | aix4*)
+    # On AIX, the GNU linker is very broken
+    ld_shlibs=no
+    cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+
+    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+    # that the semantics of dynamic libraries on AmigaOS, at least up
+    # to version 4, is to share data among multiple programs linked
+    # with the same dynamic library.  Since this doesn't match the
+    # behavior of shared libraries on other platforms, we can use
+    # them.
+    ld_shlibs=no
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  cygwin* | mingw*)
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec='-L$libdir'
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+
+    # Extract the symbol export list from an `--export-all' def file,
+    # then regenerate the def file from the symbol export list, so that
+    # the compiled dll only exports the symbol export list.
+    export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
+      $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def  $objdir/$soname-ltdll.$objext $libobjs $convenience~
+      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols'
+
+    archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
+      _lt_hint=1;
+      for symbol in `cat $export_symbols`; do
+	echo "	\$symbol @ \$_lt_hint ; " >> $objdir/$soname-def;
+	_lt_hint=`expr 1 + \$_lt_hint`;
+      done~
+      test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
+      $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
+      $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
+      $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts'
+
+      old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a' 
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib'
+      # can we support soname and/or expsyms with a.out? -oliva
+    fi
+    ;;
+
+  solaris* | sysv5*)
+    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+      ld_shlibs=no
+      cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;      
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    wlarc=
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+  esac
+
+  if test "$ld_shlibs" = yes; then
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    case $host_os in
+    cygwin* | mingw*)
+      # dlltool doesn't understand --whole-archive et. al.
+      whole_archive_flag_spec=
+      ;;
+    *)
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+        whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+        whole_archive_flag_spec=
+      fi
+      ;;
+    esac
+  fi
+else
+  # PORTME fill in a description of your system's linker (not GNU ld)
+  case "$host_os" in
+  aix3*)
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+    archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname'
+    # Note: this linker hardcodes the directories in LIBPATH if there
+    # are no directories specified by -L.
+    hardcode_minus_L=yes
+    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
+      # Neither direct hardcoding nor static linking is supported with a
+      # broken collect2.
+      hardcode_direct=unsupported
+    fi
+    ;;
+
+  aix4*)
+    hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
+    hardcode_libdir_separator=':'
+    if test "$with_gcc" = yes; then
+      collect2name=`${CC} -print-prog-name=collect2`
+      if test -f "$collect2name" && \
+	 strings "$collect2name" | grep resolve_lib_name >/dev/null
+      then
+	# We have reworked collect2
+	hardcode_direct=yes
+      else
+	# We have old collect2
+	hardcode_direct=unsupported
+	# It fails to find uninstalled libraries when the uninstalled
+	# path is not listed in the libpath.  Setting hardcode_minus_L
+	# to unsupported forces relinking
+	hardcode_minus_L=yes
+	hardcode_libdir_flag_spec='-L$libdir'
+	hardcode_libdir_separator=
+      fi
+      shared_flag='-shared'
+    else
+      shared_flag='${wl}-bM:SRE'
+      hardcode_direct=yes
+    fi
+    allow_undefined_flag=' ${wl}-berok'
+    archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
+    archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
+    case "$host_os" in aix4.[01]|aix4.[01].*)
+      # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
+      always_export_symbols=yes ;;
+    esac
+   ;;
+
+  amigaos*)
+    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    # see comment about different semantics on the GNU ld section
+    ld_shlibs=no
+    ;;
+
+  cygwin* | mingw*)
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec=' '
+    allow_undefined_flag=unsupported
+    # Tell ltmain to make .lib files, not .a files.
+    libext=lib
+    # FIXME: Setting linknames here is a bad hack.
+    archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+    # The linker will automatically build a .lib file if we build a DLL.
+    old_archive_from_new_cmds='true'
+    # FIXME: Should let the user specify the lib program.
+    old_archive_cmds='lib /OUT:$oldlib$oldobjs'
+    fix_srcfile_path='`cygpath -w $srcfile`'
+    ;;
+
+  freebsd1*)
+    ld_shlibs=no
+    ;;
+
+  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+  # support.  Future versions do this automatically, but an explicit c++rt0.o
+  # does not break anything, and helps significantly (at the cost of a little
+  # extra space).
+  freebsd2.2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+  freebsd2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+  freebsd*)
+    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    case "$host_os" in
+    hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;;
+    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;;
+    esac
+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_direct=yes
+    hardcode_minus_L=yes # Not in the search PATH, but as the default
+			 # location of the library.
+    export_dynamic_flag_spec='${wl}-E'
+    ;;
+
+  irix5* | irix6*)
+    if test "$with_gcc" = yes; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'  # a.out
+    else
+      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts'      # ELF
+    fi
+    hardcode_libdir_flag_spec='${wl}-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  openbsd*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  os2*)
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    allow_undefined_flag=unsupported
+    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def'
+    old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
+    ;;
+
+  osf3*)
+    if test "$with_gcc" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  osf4* | osf5*)  # As osf3* with the addition of the -msym flag
+    if test "$with_gcc" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  sco3.2v5*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_shlibpath_var=no
+    runpath_var=LD_RUN_PATH
+    hardcode_runpath_var=yes
+    ;;
+
+  solaris*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_shlibpath_var=no
+    case "$host_os" in
+    solaris2.[0-5] | solaris2.[0-5].*) ;;
+    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+    esac
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    hardcode_direct=no #Motorola manual says yes, but my tests say they lie 
+    ;;  
+
+  sysv4.3*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_shlibpath_var=no
+    export_dynamic_flag_spec='-Bexport'
+    ;;
+
+  sysv5*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+    hardcode_libdir_flag_spec=
+    hardcode_shlibpath_var=no
+    runpath_var='LD_RUN_PATH'
+    ;;
+
+  uts4*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  dgux*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4*MP*)
+    if test -d /usr/nec; then
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+      hardcode_shlibpath_var=no
+      runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
+      ld_shlibs=yes
+    fi
+    ;;
+
+  sysv4.2uw2*)
+    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts'
+    hardcode_direct=yes
+    hardcode_minus_L=no
+    hardcode_shlibpath_var=no
+    hardcode_runpath_var=yes
+    runpath_var=LD_RUN_PATH
+    ;;
+
+  unixware7*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    ld_shlibs=no
+    ;;
+  esac
+fi
+echo "$ac_t$ld_shlibs" 1>&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+if test -z "$NM"; then
+  echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
+  case "$NM" in
+  [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path.
+  *)
+    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do
+      test -z "$ac_dir" && ac_dir=.
+      if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	  NM="$ac_dir/nm -B"
+	  break
+	elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	  NM="$ac_dir/nm -p"
+	  break
+	else
+	  NM=${NM="$ac_dir/nm"} # keep the first match, but
+	  continue # so that we can try to find one that supports BSD flags
+	fi
+      fi
+    done
+    IFS="$ac_save_ifs"
+    test -z "$NM" && NM=nm
+    ;;
+  esac
+  echo "$ac_t$NM" 1>&6
+fi
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Define system-specific variables.
+case "$host_os" in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+  ;;
+irix*)
+  symcode='[BCDEGRST]'
+  ;;
+solaris*)
+  symcode='[BDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+  symcode='[ABCDGISTW]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Write the raw and C identifiers.
+  global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode\)[ 	][ 	]*\($ac_symprfx\)$sympat$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+  $rm conftest*
+  cat > conftest.c <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  echo "$progname:1635: checking if global_symbol_pipe works" >&5
+  if { (eval echo $progname:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { echo "$progname:1639: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.c
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c'
+
+	  cat <<EOF >> conftest.c
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+	  sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c
+	  cat <<\EOF >> conftest.c
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$objext conftstm.$objext
+	  save_LIBS="$LIBS"
+	  save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$objext"
+	  CFLAGS="$CFLAGS$no_builtin_flag"
+	  if { (eval echo $progname:1691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+	    pipe_works=yes
+	  else
+	    echo "$progname: failed program was:" >&5
+	    cat conftest.c >&5
+	  fi
+	  LIBS="$save_LIBS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.c >&5
+  fi
+  $rm conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    global_symbol_pipe=
+  fi
+done
+if test "$pipe_works" = yes; then
+  echo "${ac_t}ok" 1>&6
+else
+  echo "${ac_t}failed" 1>&6
+fi
+
+if test -z "$global_symbol_pipe"; then
+  global_symbol_to_cdecl=
+fi
+
+# Check hardcoding attributes.
+echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var"; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$hardcode_shlibpath_var" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+echo "$ac_t$hardcode_action" 1>&6
+
+
+reload_flag=
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
+# PORTME Some linkers may need a different reload flag.
+reload_flag='-r'
+echo "$ac_t$reload_flag" 1>&6
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+# PORTME Fill in your ld.so characteristics
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+file_magic_cmd=
+file_magic_test_file=
+deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
+case "$host_os" in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}.so$major'
+  ;;
+
+aix4*)
+  version_type=linux
+  # AIX has no versioning support, so currently we can not hardcode correct
+  # soname into executable. Probably we can add versioning support to
+  # collect2, so additional links can be useful in future.
+  # We preserve .a as extension for shared libraries though AIX4.2
+  # and later linker supports .so
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a'
+  shlibpath_var=LIBPATH
+  deplibs_check_method=pass_all
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}.so'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  deplibs_check_method=pass_all
+  lt_cv_dlopen="load_add_on"
+  lt_cv_dlopen_libs=
+  lt_cv_dlopen_self=yes
+  ;;
+
+bsdi4*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=/shlib/libc.so
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  export_dynamic_flag_spec=-rdynamic
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw*)
+  version_type=windows
+  need_version=no
+  need_lib_prefix=no
+  if test "$with_gcc" = yes; then
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a'
+  else
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
+  fi
+  dynamic_linker='Win32 ld.exe'
+  deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  file_magic_cmd='${OBJDUMP} -f'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  lt_cv_dlopen="LoadLibrary"
+  lt_cv_dlopen_libs=
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+  
+freebsd*)
+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+  version_type=freebsd-$objformat
+  case "$version_type" in
+    freebsd-elf*)
+      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+      file_magic_cmd=/usr/bin/file
+      file_magic_test_file=`echo /usr/lib/libc.so*`
+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      deplibs_check_method=unknown
+      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case "$host_os" in
+  freebsd2* | freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  *) # from 3.2 on
+    shlibpath_overrides_runpath=no
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  dynamic_linker="$host_os dld.sl"
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  shlibpath_var=SHLIB_PATH
+  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+  soname_spec='${libname}${release}.sl$major'
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+irix5* | irix6*)
+  version_type=irix
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}.so.$major'
+  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so'
+  case "$host_os" in
+  irix5*)
+    libsuff= shlibsuff=
+    # this will be overridden with pass_all, but let us keep it just in case
+    deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case "$LD" in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  deplibs_check_method='pass_all'
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+
+  if test -f /lib/ld.so.1; then
+    dynamic_linker='GNU ld.so'
+  else
+    # Only the GNU ld.so supports shared libraries on MkLinux.
+    case "$host_cpu" in
+    powerpc*) dynamic_linker=no ;;
+    *) dynamic_linker='Linux ld.so' ;;
+    esac
+  fi
+  ;;
+
+netbsd*)
+  version_type=sunos
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+    soname_spec='${libname}${release}.so$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+openbsd*)
+  version_type=sunos
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+    need_version=no
+  fi
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+os2*)
+  libname_spec='$name'
+  need_lib_prefix=no
+  library_names_spec='$libname.dll $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_version=no
+  soname_spec='${libname}${release}.so'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  # this will be overridden with pass_all, but let us keep it just in case
+  deplibs_check_method='file_magic COFF format alpha shared library'
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=/shlib/libc.so
+  deplibs_check_method='pass_all'
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib"
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=/lib/libc.so
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case "$host_vendor" in
+    ncr)
+      deplibs_check_method='pass_all'
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+      file_magic_cmd=/usr/bin/file
+      file_magic_test_file=`echo /usr/lib/libc.so*`
+      ;;
+  esac
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+    soname_spec='$libname.so.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$ac_t$dynamic_linker" 1>&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+# Report the final consequences.
+echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
+
+# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
+# configure.in, otherwise build static only libraries.
+case "$host_os" in
+cygwin* | mingw* | os2*)
+  if test x$can_build_shared = xyes; then
+    test x$enable_win32_dll = xno && can_build_shared=no
+    echo "checking if package supports dlls... $can_build_shared" 1>&6
+  fi
+;;
+esac
+
+if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then
+  case "$deplibs_check_method" in
+  "file_magic "*)
+    file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+    if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+       egrep "$file_magic_regex" > /dev/null; then
+      :
+    else
+      cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+    fi ;;
+  esac
+fi
+
+echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4*)
+  test "$enable_shared" = yes && enable_static=no
+  ;;
+esac
+
+echo "$ac_t$enable_shared" 1>&6
+
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+
+echo "checking whether to build static libraries... $enable_static" 1>&6
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+echo $ac_n "checking for objdir... $ac_c" 1>&6
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+echo "$ac_t$objdir" 1>&6
+
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
+  lt_cv_dlopen=no lt_cv_dlopen_libs=
+echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "$progname:2212: checking for dlopen in -ldl" >&5
+ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldl  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2220 "ltconfig"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo $progname:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlopen""... $ac_c" 1>&6
+echo "$progname:2252: checking for dlopen" >&5
+if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2257 "ltconfig"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char dlopen(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+dlopen();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:2282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_dlopen=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_dlopen=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dlopen"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
+echo "$progname:2299: checking for dld_link in -ldld" >&5
+ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldld  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2307 "ltconfig"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link();
+
+int main() {
+dld_link()
+; return 0; }
+EOF
+if { (eval echo $progname:2320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load""... $ac_c" 1>&6
+echo "$progname:2339: checking for shl_load" >&5
+if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2344 "ltconfig"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char shl_load(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+shl_load();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:2369: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_shl_load=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_shl_load=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="shl_load"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+echo "$progname:2387: checking for shl_load in -ldld" >&5
+ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldld  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2395 "ltconfig"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load();
+
+int main() {
+shl_load()
+; return 0; }
+EOF
+if { (eval echo $progname:2409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+fi
+
+    
+fi
+
+  
+fi
+
+
+fi
+
+fi
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  fi
+
+  case "$lt_cv_dlopen" in
+  dlopen)
+for ac_hdr in dlfcn.h; do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "$progname:2452: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2457 "ltconfig"
+#include <$ac_hdr>
+int fnord = 0;
+EOF
+ac_try="$ac_compile >/dev/null 2>conftest.out"
+{ (eval echo $progname:2462: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+    if test "x$ac_cv_header_dlfcn_h" = xyes; then
+      CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+    fi
+    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+  echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:2490: checking whether a program can dlopen itself" >&5
+if test "${lt_cv_dlopen_self+set}" = set; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+    lt_cv_dlopen_self=cross
+  else
+    cat > conftest.c <<EOF
+#line 2498 "ltconfig"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL	RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+#  define LTDL_GLOBAL	DL_GLOBAL
+# else
+#  define LTDL_GLOBAL	0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+#  define LTDL_LAZY_OR_NOW	RTLD_LAZY
+# else
+#  ifdef DL_LAZY
+#   define LTDL_LAZY_OR_NOW	DL_LAZY
+#  else
+#   ifdef RTLD_NOW
+#    define LTDL_LAZY_OR_NOW	RTLD_NOW
+#   else
+#    ifdef DL_NOW
+#     define LTDL_LAZY_OR_NOW	DL_NOW
+#    else
+#     define LTDL_LAZY_OR_NOW	0
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+fnord() { int i=42;}
+main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+	       if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
+
+EOF
+if { (eval echo $progname:2544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+  lt_cv_dlopen_self=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  lt_cv_dlopen_self=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self" 1>&6
+
+  if test "$lt_cv_dlopen_self" = yes; then
+    LDFLAGS="$LDFLAGS $link_static_flag"
+  echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:2563: checking whether a statically linked program can dlopen itself" >&5
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+    lt_cv_dlopen_self_static=cross
+  else
+    cat > conftest.c <<EOF
+#line 2571 "ltconfig"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL	RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+#  define LTDL_GLOBAL	DL_GLOBAL
+# else
+#  define LTDL_GLOBAL	0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+#  define LTDL_LAZY_OR_NOW	RTLD_LAZY
+# else
+#  ifdef DL_LAZY
+#   define LTDL_LAZY_OR_NOW	DL_LAZY
+#  else
+#   ifdef RTLD_NOW
+#    define LTDL_LAZY_OR_NOW	RTLD_NOW
+#   else
+#    ifdef DL_NOW
+#     define LTDL_LAZY_OR_NOW	DL_NOW
+#    else
+#     define LTDL_LAZY_OR_NOW	0
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+fnord() { int i=42;}
+main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+    if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
+
+EOF
+if { (eval echo $progname:2617: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+  lt_cv_dlopen_self_static=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  lt_cv_dlopen_self_static=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
+fi
+    ;;
+  esac
+
+  case "$lt_cv_dlopen_self" in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case "$lt_cv_dlopen_self_static" in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+# Copy echo and quote the copy, instead of the original, because it is
+# used later.
+ltecho="$echo"
+if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   ltecho="$CONFIG_SHELL \$0 --fallback-echo"
+fi
+LTSHELL="$SHELL"
+
+LTCONFIG_VERSION="$VERSION"
+
+# Only quote variables if we're using ltmain.sh.
+case "$ltmain" in
+*.sh)
+  # Now quote all the things that may contain metacharacters.
+  for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \
+    old_LD old_LDFLAGS old_LIBS \
+    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \
+    AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
+    reload_flag reload_cmds wl \
+    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+    library_names_spec soname_spec \
+    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \
+    file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \
+    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+    hardcode_libdir_flag_spec hardcode_libdir_separator  \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+
+    case "$var" in
+    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case "$ltecho" in
+  *'\$0 --fallback-echo"')
+    ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+  trap "$rm \"$ofile\"; exit 1" 1 2 15
+  echo "creating $ofile"
+  $rm "$ofile"
+  cat <<EOF > "$ofile"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
+#
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="sed -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+### BEGIN LIBTOOL CONFIG
+EOF
+  cfgfile="$ofile"
+  ;;
+
+*)
+  # Double-quote the variables that need it (for aesthetics).
+  for var in old_CC old_CFLAGS old_CPPFLAGS \
+    old_LD old_LDFLAGS old_LIBS \
+    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do
+    eval "$var=\\\"\$var\\\""
+  done
+
+  # Just create a config file.
+  cfgfile="$ofile.cfg"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  echo "creating $cfgfile"
+  $rm "$cfgfile"
+  cat <<EOF > "$cfgfile"
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+EOF
+  ;;
+esac
+
+cat <<EOF >> "$cfgfile"
+# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
+# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
+# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
+# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\
+#   $0$ltconfig_args
+#
+# Compiler and other test output produced by $progname, useful for
+# debugging $progname, is in ./config.log if it exists.
+
+# The version of $progname that generated this script.
+LTCONFIG_VERSION=$LTCONFIG_VERSION
+
+# Shell to use when invoking shell scripts.
+SHELL=$LTSHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$ltecho
+
+# The archiver.
+AR=$AR
+
+# The default C compiler.
+CC=$CC
+
+# The linker used to build libraries.
+LD=$LD
+
+# Whether we need hard or soft links.
+LN_S=$LN_S
+
+# A BSD-compatible nm program.
+NM=$NM
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$reload_flag
+reload_cmds=$reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$wl
+
+# Object file suffix (normally "o").
+objext="$objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$pic_flag
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$compiler_c_o
+
+# Can we write directly to a .lo ?
+compiler_o_lo=$compiler_o_lo
+
+# Must we lock files when doing compilation ?
+need_locks=$need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$link_static_flag
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$RANLIB
+old_archive_cmds=$old_archive_cmds
+old_postinstall_cmds=$old_postinstall_cmds
+old_postuninstall_cmds=$old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$old_archive_from_new_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$archive_cmds
+archive_expsym_cmds=$archive_expsym_cmds
+postinstall_cmds=$postinstall_cmds
+postuninstall_cmds=$postuninstall_cmds
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$global_symbol_to_cdecl
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$include_expsyms
+
+EOF
+
+case "$ltmain" in
+*.sh)
+  echo '### END LIBTOOL CONFIG' >> "$ofile"
+  echo >> "$ofile"
+  case "$host_os" in
+  aix3*)
+    cat <<\EOF >> "$ofile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  # Append the ltmain.sh script.
+  sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+
+  chmod +x "$ofile"
+  ;;
+
+*)
+  # Compile the libtool program.
+  echo "FIXME: would compile $ltmain"
+  ;;
+esac
+
+test -n "$cache_file" || exit 0
+
+# AC_CACHE_SAVE
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/srclib/pcre/ltmain.sh b/srclib/pcre/ltmain.sh
new file mode 100644
index 0000000000..50515ad0b9
--- /dev/null
+++ b/srclib/pcre/ltmain.sh
@@ -0,0 +1,4012 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun ltconfig.
+#
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# The name of this program.
+progname=`$echo "$0" | sed 's%^.*/%%'`
+modename="$progname"
+
+# Constants.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.3.4
+TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)"
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+SP2NL='tr \040 \012'
+NL2SP='tr \015\012 \040\040'
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+  save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+if test "$LTCONFIG_VERSION" != "$VERSION"; then
+  echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  echo "$modename: not configured to build any kind of library" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+
+# Parse our command line options once, thoroughly.
+while test $# -gt 0
+do
+  arg="$1"
+  shift
+
+  case "$arg" in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case "$prev" in
+    execute_dlfiles)
+      eval "$prev=\"\$$prev \$arg\""
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case "$arg" in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+    exit 0
+    ;;
+
+  --config)
+    sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
+    exit 0
+    ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+    exit 0
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --quiet | --silent)
+    show=:
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+fi
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    case "$nonopt" in
+    *cc | *++ | gcc* | *-gcc*)
+      mode=link
+      for arg
+      do
+	case "$arg" in
+	-c)
+	   mode=compile
+	   break
+	   ;;
+	esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+	if test -n "$nonopt"; then
+	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+	else
+	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+	fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case "$mode" in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    lastarg=
+    srcfile="$nonopt"
+    suppress_output=
+
+    user_target=no
+    for arg
+    do
+      # Accept any command-line options.
+      case "$arg" in
+      -o)
+	if test "$user_target" != "no"; then
+	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+	  exit 1
+	fi
+	user_target=next
+	;;
+
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+      esac
+
+      case "$user_target" in
+      next)
+	# The next one is the -o target name
+	user_target=yes
+	continue
+	;;
+      yes)
+	# We got the output file
+	user_target=set
+	libobj="$arg"
+	continue
+	;;
+      esac
+
+      # Accept the current argument as the source file.
+      lastarg="$srcfile"
+      srcfile="$arg"
+
+      # Aesthetically quote the previous argument.
+
+      # Backslashify any backslashes, double quotes, and dollar signs.
+      # These are the only characters that are still specially
+      # interpreted inside of double-quoted scrings.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly in scan
+      # sets, so we specify it separately.
+      case "$lastarg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	lastarg="\"$lastarg\""
+	;;
+      esac
+
+      # Add the previous argument to base_compile.
+      if test -z "$base_compile"; then
+	base_compile="$lastarg"
+      else
+	base_compile="$base_compile $lastarg"
+      fi
+    done
+
+    case "$user_target" in
+    set)
+      ;;
+    no)
+      # Get the name of the library object.
+      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      ;;
+    *)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    xform='[cCFSfmso]'
+    case "$libobj" in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.f90) xform=f90 ;;
+    *.for) xform=for ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case "$libobj" in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $libobj"
+    else
+      removelist="$libobj"
+    fi
+
+    $run $rm $removelist
+    trap "$run $rm $removelist; exit 1" 1 2 15
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+      removelist="$removelist $output_obj $lockfile"
+      trap "$run $rm $removelist; exit 1" 1 2 15
+    else
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until ln "$0" "$lockfile" 2>/dev/null; do
+	$show "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+      echo $srcfile > "$lockfile"
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      # All platforms use -DPIC, to notify preprocessed assembler code.
+      command="$base_compile $srcfile $pic_flag -DPIC"
+      if test "$build_old_libs" = yes; then
+	lo_libobj="$libobj"
+	dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$dir" = "X$libobj"; then
+	  dir="$objdir"
+	else
+	  dir="$dir/$objdir"
+	fi
+	libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+
+	if test -d "$dir"; then
+	  $show "$rm $libobj"
+	  $run $rm $libobj
+	else
+	  $show "$mkdir $dir"
+	  $run $mkdir $dir
+	  status=$?
+	  if test $status -ne 0 && test ! -d $dir; then
+	    exit $status
+	  fi
+	fi
+      fi
+      if test "$compiler_o_lo" = yes; then
+	output_obj="$libobj"
+	command="$command -o $output_obj"
+      elif test "$compiler_c_o" = yes; then
+	output_obj="$obj"
+	command="$command -o $output_obj"
+      fi
+
+      $run $rm "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	test -n "$output_obj" && $run $rm $removelist
+	exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+	echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test x"$output_obj" != x"$libobj"; then
+	$show "$mv $output_obj $libobj"
+	if $run $mv $output_obj $libobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # If we have no pic_flag, then copy the object into place and finish.
+      if test -z "$pic_flag" && test "$build_old_libs" = yes; then
+	# Rename the .lo from within objdir to obj
+	if test -f $obj; then
+	  $show $rm $obj
+	  $run $rm $obj
+	fi
+
+	$show "$mv $libobj $obj"
+	if $run $mv $libobj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+
+	xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$xdir" = "X$obj"; then
+	  xdir="."
+	else
+	  xdir="$xdir"
+	fi
+	baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
+	libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+	# Now arrange that obj and lo_libobj become the same file
+	$show "(cd $xdir && $LN_S $baseobj $libobj)"
+	if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
+	  exit 0
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Allow error messages only from the first compilation.
+      suppress_output=' >/dev/null 2>&1'
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      command="$base_compile $srcfile"
+      if test "$compiler_c_o" = yes; then
+	command="$command -o $obj"
+	output_obj="$obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      command="$command$suppress_output"
+      $run $rm "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	$run $rm $removelist
+	exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+	echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+
+      # Just move the object if needed
+      if test x"$output_obj" != x"$obj"; then
+	$show "$mv $output_obj $obj"
+	if $run $mv $output_obj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Create an invalid libtool object if no PIC, so that we do not
+      # accidentally link it into a program.
+      if test "$build_libtool_libs" != yes; then
+	$show "echo timestamp > $libobj"
+	$run eval "echo timestamp > \$libobj" || exit $?
+      else
+	# Move the .lo from within objdir
+	$show "$mv $libobj $lo_libobj"
+	if $run $mv $libobj $lo_libobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+    fi
+
+    # Unlock the critical section if it was locked
+    if test "$need_locks" != no; then
+      $rm "$lockfile"
+    fi
+
+    exit 0
+    ;;
+
+  # libtool link mode
+  link)
+    modename="$modename: link"
+    case "$host" in
+    *-*-cygwin* | *-*-mingw* | *-*-os2*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invokation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+
+      # This is a source program that is used to create dlls on Windows
+      # Don't remove nor modify the starting and closing comments
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+      # This is a source program that is used to create import libraries
+      # on Windows for dlls which lack them. Don't remove nor modify the
+      # starting and closing comments
+# /* impgen.c starts here */
+# /*   Copyright (C) 1999 Free Software Foundation, Inc.
+# 
+#  This file is part of GNU libtool.
+# 
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+# 
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+# 
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#  */
+# 
+#  #include <stdio.h>		/* for printf() */
+#  #include <unistd.h>		/* for open(), lseek(), read() */
+#  #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
+#  #include <string.h>		/* for strdup() */
+# 
+#  static unsigned int
+#  pe_get16 (fd, offset)
+#       int fd;
+#       int offset;
+#  {
+#    unsigned char b[2];
+#    lseek (fd, offset, SEEK_SET);
+#    read (fd, b, 2);
+#    return b[0] + (b[1]<<8);
+#  }
+# 
+#  static unsigned int
+#  pe_get32 (fd, offset)
+#      int fd;
+#      int offset;
+#  {
+#    unsigned char b[4];
+#    lseek (fd, offset, SEEK_SET);
+#    read (fd, b, 4);
+#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+#  }
+# 
+#  static unsigned int
+#  pe_as32 (ptr)
+#       void *ptr;
+#  {
+#    unsigned char *b = ptr;
+#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+#  }
+# 
+#  int
+#  main (argc, argv)
+#      int argc;
+#      char *argv[];
+#  {
+#      int dll;
+#      unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+#      unsigned long export_rva, export_size, nsections, secptr, expptr;
+#      unsigned long name_rvas, nexp;
+#      unsigned char *expdata, *erva;
+#      char *filename, *dll_name;
+# 
+#      filename = argv[1];
+# 
+#      dll = open(filename, O_RDONLY|O_BINARY);
+#      if (!dll)
+#  	return 1;
+# 
+#      dll_name = filename;
+#    
+#      for (i=0; filename[i]; i++)
+#  	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
+#  	    dll_name = filename + i +1;
+# 
+#      pe_header_offset = pe_get32 (dll, 0x3c);
+#      opthdr_ofs = pe_header_offset + 4 + 20;
+#      num_entries = pe_get32 (dll, opthdr_ofs + 92);
+# 
+#      if (num_entries < 1) /* no exports */
+#  	return 1;
+# 
+#      export_rva = pe_get32 (dll, opthdr_ofs + 96);
+#      export_size = pe_get32 (dll, opthdr_ofs + 100);
+#      nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+#      secptr = (pe_header_offset + 4 + 20 +
+#  	      pe_get16 (dll, pe_header_offset + 4 + 16));
+# 
+#      expptr = 0;
+#      for (i = 0; i < nsections; i++)
+#      {
+#  	char sname[8];
+#  	unsigned long secptr1 = secptr + 40 * i;
+#  	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+#  	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+#  	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+#  	lseek(dll, secptr1, SEEK_SET);
+#  	read(dll, sname, 8);
+#  	if (vaddr <= export_rva && vaddr+vsize > export_rva)
+#  	{
+#  	    expptr = fptr + (export_rva - vaddr);
+#  	    if (export_rva + export_size > vaddr + vsize)
+#  		export_size = vsize - (export_rva - vaddr);
+#  	    break;
+#  	}
+#      }
+# 
+#      expdata = (unsigned char*)malloc(export_size);
+#      lseek (dll, expptr, SEEK_SET);
+#      read (dll, expdata, export_size);
+#      erva = expdata - export_rva;
+# 
+#      nexp = pe_as32 (expdata+24);
+#      name_rvas = pe_as32 (expdata+32);
+# 
+#      printf ("EXPORTS\n");
+#      for (i = 0; i<nexp; i++)
+#      {
+#  	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+#  	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+#      }
+# 
+#      return 0;
+#  }
+# /* impgen.c ends here */
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    compile_command="$nonopt"
+    finalize_command="$nonopt"
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    linkopts=
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      lib_search_path=
+    fi
+    # now prepend the system-specific ones
+    eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+    
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    link_against_libtool_libs=
+    ltlibs=
+    module=no
+    objs=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case "$arg" in
+      -all-static | -static)
+	if test "X$arg" = "X-all-static"; then
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	else
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	fi
+	build_libtool_libs=no
+	build_old_libs=yes
+	prefer_static_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test $# -gt 0; do
+      arg="$1"
+      shift
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case "$prev" in
+	output)
+	  compile_command="$compile_command @OUTPUT@"
+	  finalize_command="$finalize_command @OUTPUT@"
+	  ;;
+	esac
+
+	case "$prev" in
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    compile_command="$compile_command @SYMFILE@"
+	    finalize_command="$finalize_command @SYMFILE@"
+	    preload=yes
+	  fi
+	  case "$arg" in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      dlfiles="$dlfiles $arg"
+	    else
+	      dlprefiles="$dlprefiles $arg"
+	    fi
+	    prev=
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  if test ! -f "$arg"; then
+	    $echo "$modename: symbol file \`$arg' does not exist"
+	    exit 1
+	  fi
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case "$arg" in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+	    exit 1
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) rpath="$rpath $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) xrpath="$xrpath $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi
+
+      prevarg="$arg"
+
+      case "$arg" in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+	continue
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  $echo "$modename: not more than one -exported-symbols argument allowed"
+	  exit 1
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -L*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	# We need an absolute path.
+	case "$dir" in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  if test -z "$absdir"; then
+	    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    absdir="$dir"
+	  fi
+	  dir="$absdir"
+	  ;;
+	esac
+	case " $deplibs " in
+	*" $arg "*) ;;
+	*) deplibs="$deplibs $arg";;
+	esac
+	case " $lib_search_path " in
+	*" $dir "*) ;;
+	*) lib_search_path="$lib_search_path $dir";;
+	esac
+	case "$host" in
+	*-*-cygwin* | *-*-mingw* | *-*-os2*)
+	  dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
+	  case ":$dllsearchpath:" in
+	  ::) dllsearchpath="$dllsearchdir";;
+	  *":$dllsearchdir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$dllsearchdir";;
+	  esac
+	  ;;
+	esac
+	;;
+
+      -l*)
+	if test "$arg" = "-lc"; then
+	  case "$host" in
+	  *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
+	    # These systems don't actually have c library (as such)
+	    continue
+	    ;;
+	  esac
+	elif test "$arg" = "-lm"; then
+	  case "$host" in
+	  *-*-cygwin* | *-*-beos*)
+	    # These systems don't actually have math library (as such)
+	    continue
+	    ;;
+	  esac
+	fi
+	deplibs="$deplibs $arg"
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	# We need an absolute path.
+	case "$dir" in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+	  exit 1
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) xrpath="$xrpath $dir" ;;
+	esac
+	continue
+	;;
+
+      -static)
+	# If we have no pic_flag, then this is the same as -all-static.
+	if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	  compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+	fi
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case "$arg" in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+
+      *.o | *.obj | *.a | *.lib)
+	# A standard object.
+	objs="$objs $arg"
+	;;
+
+      *.lo)
+	# A library object.
+	if test "$prev" = dlfiles; then
+	  dlfiles="$dlfiles $arg"
+	  if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then
+	    prev=
+	    continue
+	  else
+	    # If libtool objects are unsupported, then we need to preload.
+	    prev=dlprefiles
+	  fi
+	fi
+
+	if test "$prev" = dlprefiles; then
+	  # Preload the old-style object.
+	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
+	  prev=
+	fi
+	libobjs="$libobjs $arg"
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	dlname=
+	libdir=
+	library_names=
+	old_library=
+
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
+	  exit 1
+	fi
+
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variable installed.
+	installed=yes
+
+	# Read the .la file
+	# If there is no directory component, then add one.
+	case "$arg" in
+	*/* | *\\*) . $arg ;;
+	*) . ./$arg ;;
+	esac
+
+	# Get the name of the library we link against.
+	linklib=
+	for l in $old_library $library_names; do
+	  linklib="$l"
+	done
+
+	if test -z "$linklib"; then
+	  $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
+	  exit 1
+	fi
+
+	# Find the relevant object directory and library name.
+	name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
+
+	if test "X$installed" = Xyes; then
+	  dir="$libdir"
+	else
+	  dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$dir" = "X$arg"; then
+	    dir="$objdir"
+	  else
+	    dir="$dir/$objdir"
+	  fi
+	fi
+
+	if test -n "$dependency_libs"; then
+	  # Extract -R and -L from dependency_libs
+	  temp_deplibs=
+	  for deplib in $dependency_libs; do
+	    case "$deplib" in
+	    -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+		 case " $rpath $xrpath " in
+		 *" $temp_xrpath "*) ;;
+		 *) xrpath="$xrpath $temp_xrpath";;
+		 esac;;
+	    -L*) case "$compile_command $temp_deplibs " in
+		 *" $deplib "*) ;;
+		 *) temp_deplibs="$temp_deplibs $deplib";;
+		 esac
+		 temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+		 case " $lib_search_path " in
+		 *" $temp_dir "*) ;;
+		 *) lib_search_path="$lib_search_path $temp_dir";;
+		 esac
+		 ;;
+	    *) temp_deplibs="$temp_deplibs $deplib";;
+	    esac
+	  done
+	  dependency_libs="$temp_deplibs"
+	fi
+
+	if test -z "$libdir"; then
+	  # It is a libtool convenience library, so add in its objects.
+	  convenience="$convenience $dir/$old_library"
+	  old_convenience="$old_convenience $dir/$old_library"
+	  deplibs="$deplibs$dependency_libs"
+	  compile_command="$compile_command $dir/$old_library$dependency_libs"
+	  finalize_command="$finalize_command $dir/$old_library$dependency_libs"
+	  continue
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$prev" = dlfiles; then
+	  dlfiles="$dlfiles $arg"
+	  if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking statically,
+	    # we need to preload.
+	    prev=dlprefiles
+	  else
+	    # We should not create a dependency on this library, but we
+	    # may need any libraries it requires.
+	    compile_command="$compile_command$dependency_libs"
+	    finalize_command="$finalize_command$dependency_libs"
+	    prev=
+	    continue
+	  fi
+	fi
+
+	# The library was specified with -dlpreopen.
+	if test "$prev" = dlprefiles; then
+	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+	  # are required to link).
+	  if test -n "$old_library"; then
+	    dlprefiles="$dlprefiles $dir/$old_library"
+	  else
+	    dlprefiles="$dlprefiles $dir/$linklib"
+	  fi
+	  prev=
+	fi
+
+	if test -n "$library_names" &&
+	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	  link_against_libtool_libs="$link_against_libtool_libs $arg"
+	  if test -n "$shlibpath_var"; then
+	    # Make sure the rpath contains only unique directories.
+	    case "$temp_rpath " in
+	    *" $dir "*) ;;
+	    *) temp_rpath="$temp_rpath $dir" ;;
+	    esac
+	  fi
+
+	  # We need an absolute path.
+	  case "$dir" in
+	  [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+	  *)
+	    absdir=`cd "$dir" && pwd`
+	    if test -z "$absdir"; then
+	      $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+	      $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	      absdir="$dir"
+	    fi
+	    ;;
+	  esac
+	  
+	  # This is the magic to use -rpath.
+	  # Skip directories that are in the system default run-time
+	  # search path, unless they have been requested with -R.
+	  case " $sys_lib_dlsearch_path " in
+	  *" $absdir "*) ;;
+	  *)
+	    case "$compile_rpath " in
+	    *" $absdir "*) ;;
+	    *) compile_rpath="$compile_rpath $absdir" 
+	    esac
+	    ;;
+	  esac
+
+	  case " $sys_lib_dlsearch_path " in
+	  *" $libdir "*) ;;
+	  *)
+	    case "$finalize_rpath " in
+	    *" $libdir "*) ;;
+	    *) finalize_rpath="$finalize_rpath $libdir"
+	    esac
+	    ;;
+	  esac
+
+	  lib_linked=yes
+	  case "$hardcode_action" in
+	  immediate | unsupported)
+	    if test "$hardcode_direct" = no; then
+	      compile_command="$compile_command $dir/$linklib"
+	      deplibs="$deplibs $dir/$linklib"
+	      case "$host" in
+	      *-*-cygwin* | *-*-mingw* | *-*-os2*)
+		dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
+		if test -n "$dllsearchpath"; then
+		  dllsearchpath="$dllsearchpath:$dllsearchdir"
+		else
+		  dllsearchpath="$dllsearchdir"
+		fi
+		;;
+	      esac
+	    elif test "$hardcode_minus_L" = no; then
+	      case "$host" in
+	      *-*-sunos*)
+		compile_shlibpath="$compile_shlibpath$dir:"
+		;;
+	      esac
+	      case "$compile_command " in
+	      *" -L$dir "*) ;;
+	      *) compile_command="$compile_command -L$dir";;
+	      esac
+	      compile_command="$compile_command -l$name"
+	      deplibs="$deplibs -L$dir -l$name"
+	    elif test "$hardcode_shlibpath_var" = no; then
+	      case ":$compile_shlibpath:" in
+	      *":$dir:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$dir:";;
+	      esac
+	      compile_command="$compile_command -l$name"
+	      deplibs="$deplibs -l$name"
+	    else
+	      lib_linked=no
+	    fi
+	    ;;
+
+	  relink)
+	    if test "$hardcode_direct" = yes; then
+	      compile_command="$compile_command $absdir/$linklib"
+	      deplibs="$deplibs $absdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      case "$compile_command " in
+	      *" -L$absdir "*) ;;
+	      *) compile_command="$compile_command -L$absdir";;
+	      esac
+	      compile_command="$compile_command -l$name"
+	      deplibs="$deplibs -L$absdir -l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case ":$compile_shlibpath:" in
+	      *":$absdir:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$absdir:";;
+	      esac
+	      compile_command="$compile_command -l$name"
+	      deplibs="$deplibs -l$name"
+	    else
+	      lib_linked=no
+	    fi
+	    ;;
+
+	  *)
+	    lib_linked=no
+	    ;;
+	  esac
+
+	  if test "$lib_linked" != yes; then
+	    $echo "$modename: configuration error: unsupported hardcode properties"
+	    exit 1
+	  fi
+
+	  # Finalize command for both is simple: just hardcode it.
+	  if test "$hardcode_direct" = yes; then
+	    finalize_command="$finalize_command $libdir/$linklib"
+	  elif test "$hardcode_minus_L" = yes; then
+	    case "$finalize_command " in
+	    *" -L$libdir "*) ;;
+	    *) finalize_command="$finalize_command -L$libdir";;
+	    esac
+	    finalize_command="$finalize_command -l$name"
+	  elif test "$hardcode_shlibpath_var" = yes; then
+	    case ":$finalize_shlibpath:" in
+	    *":$libdir:"*) ;;
+	    *) finalize_shlibpath="$finalize_shlibpath$libdir:";;
+	    esac
+	    finalize_command="$finalize_command -l$name"
+	  else
+	    # We cannot seem to hardcode it, guess we'll fake it.
+	    case "$finalize_command " in
+	    *" -L$dir "*) ;;
+	    *) finalize_command="$finalize_command -L$libdir";;
+	    esac
+	    finalize_command="$finalize_command -l$name"
+	  fi
+	else
+	  # Transform directly to old archives if we don't build new libraries.
+	  if test -n "$pic_flag" && test -z "$old_library"; then
+	    $echo "$modename: cannot find static library for \`$arg'" 1>&2
+	    exit 1
+	  fi
+
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_command="$compile_command $dir/$linklib"
+	    finalize_command="$finalize_command $dir/$linklib"
+	  else
+	    case "$compile_command " in
+	    *" -L$dir "*) ;;
+	    *) compile_command="$compile_command -L$dir";;
+	    esac
+	    compile_command="$compile_command -l$name"
+	    case "$finalize_command " in
+	    *" -L$dir "*) ;;
+	    *) finalize_command="$finalize_command -L$dir";;
+	    esac
+	    finalize_command="$finalize_command -l$name"
+	  fi
+	fi
+
+	# Add in any libraries that this one depends upon.
+	compile_command="$compile_command$dependency_libs"
+	finalize_command="$finalize_command$dependency_libs"
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case "$arg" in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+      esac
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+      fi
+    done
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    case "$output" in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+      ;;
+
+    *.a | *.lib)
+      if test -n "$link_against_libtool_libs"; then
+	$echo "$modename: error: cannot link libtool libraries into archives" 1>&2
+	exit 1
+      fi
+
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      ;;
+
+    *.la)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case "$outputname" in
+      lib*)
+	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	if test "$module" = no; then
+	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  eval libname=\"$libname_spec\"
+	else
+	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	fi
+	;;
+      esac
+
+      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$output_objdir" = "X$output"; then
+	output_objdir="$objdir"
+      else
+	output_objdir="$output_objdir/$objdir"
+      fi
+
+      if test -n "$objs"; then
+	$echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
+	exit 1
+      fi
+
+      # How the heck are we supposed to write a wrapper for a shared library?
+      if test -n "$link_against_libtool_libs"; then
+	 $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
+	 exit 1
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test $# -gt 2; then
+	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  libext=al
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+	dependency_libs="$deplibs"
+
+	if test -n "$vinfo"; then
+	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+	fi
+
+	if test -n "$release"; then
+	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+	fi
+      else
+
+	# Parse the version information argument.
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	IFS="$save_ifs"
+
+	if test -n "$8"; then
+	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	current="$2"
+	revision="$3"
+	age="$4"
+
+	# Check that each of the things are valid numbers.
+	case "$current" in
+	0 | [1-9] | [1-9][0-9]*) ;;
+	*)
+	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case "$revision" in
+	0 | [1-9] | [1-9][0-9]*) ;;
+	*)
+	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case "$age" in
+	0 | [1-9] | [1-9][0-9]*) ;;
+	*)
+	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	if test $age -gt $current; then
+	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case "$version_type" in
+	none) ;;
+
+	irix)
+	  major=`expr $current - $age + 1`
+	  versuffix="$major.$revision"
+	  verstring="sgi$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test $loop != 0; do
+	    iface=`expr $revision - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="sgi$major.$iface:$verstring"
+	  done
+	  ;;
+
+	linux)
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  major=`expr $current - $age`
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test $loop != 0; do
+	    iface=`expr $current - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  verstring="$verstring:${current}.0"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current";
+	  ;;
+
+	windows)
+	  # Like Linux, but with '-' rather than '.', since we only
+	  # want one extension on Windows 95.
+	  major=`expr $current - $age`
+	  versuffix="-$major-$age-$revision"
+	  ;;
+
+	*)
+	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  verstring="0.0"
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+	
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+
+	dependency_libs="$deplibs"
+	case "$host" in
+	*-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
+	  # these systems don't actually have a c library (as such)!
+	  ;;
+	*)
+	  # Add libc to deplibs on all other systems.
+	  deplibs="$deplibs -lc"
+	  ;;
+	esac
+      fi
+
+      # Create the output directory, or remove our outputs if we need to.
+      if test -d $output_objdir; then
+	$show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
+	$run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
+      else
+	$show "$mkdir $output_objdir"
+	$run $mkdir $output_objdir
+	status=$?
+	if test $status -ne 0 && test ! -d $output_objdir; then
+	  exit $status
+	fi
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+      fi
+
+      if test "$build_libtool_libs" = yes; then
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case "$deplibs_check_method" in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behaviour.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $rm conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $rm conftest
+	  $CC -o conftest conftest.c $deplibs
+	  if test $? -eq 0 ; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      name="`expr $i : '-l\(.*\)'`"
+	      # If $name is empty we are operating on a -L argument.
+	      if test "$name" != "" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		set dummy $deplib_matches
+		deplib_match=$2
+		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		  newdeplibs="$newdeplibs $i"
+		else
+		  droppeddeps=yes
+		  echo
+		  echo "*** Warning: This library needs some functionality provided by $i."
+		  echo "*** I have the capability to make that library automatically link in when"
+		  echo "*** you link to this library.  But I can only do this if you have a"
+		  echo "*** shared version of the library, which you do not appear to have."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  else
+	    # Error occured in the first compile.  Let's try to salvage the situation:
+	    # Compile a seperate program for each library.
+	    for i in $deplibs; do
+	      name="`expr $i : '-l\(.*\)'`"
+	     # If $name is empty we are operating on a -L argument.
+	      if test "$name" != "" ; then
+		$rm conftest
+		$CC -o conftest conftest.c $i
+		# Did it work?
+		if test $? -eq 0 ; then
+		  ldd_output=`ldd conftest`
+		  libname=`eval \\$echo \"$libname_spec\"`
+		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  set dummy $deplib_matches
+		  deplib_match=$2
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    echo "*** Warning: This library needs some functionality provided by $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which you do not appear to have."
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "***  make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`"
+	  for a_deplib in $deplibs; do
+	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    # If $name is empty we are operating on a -L argument.
+	    if test "$name" != "" ; then
+	      libname=`eval \\$echo \"$libname_spec\"`
+	      for i in $lib_search_path; do
+		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		    for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null \
+			 | grep " -> " >/dev/null; then
+			continue 
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
+			case "$potliblink" in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+			 | sed 10q \
+			 | egrep "$file_magic_regex" > /dev/null; then
+			newdeplibs="$newdeplibs $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		    done
+	      done
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		echo "*** Warning: This library needs some functionality provided by $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have."
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
+	     grep . >/dev/null; then
+	    echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	  fi
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+      
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	# Get the real and link names of the library.
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	realname="$2"
+	shift; shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+
+	lib="$output_objdir/$realname"
+	for link
+	do
+	  linknames="$linknames $link"
+	done
+
+	# Ensure that we have .o objects for linkers which dislike .lo
+	# (e.g. aix) in case we are running --disable-static
+	for obj in $libobjs; do
+	  xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$xdir" = "X$obj"; then
+	    xdir="."
+	  else
+	    xdir="$xdir"
+	  fi
+	  baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	  oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+	  if test ! -f $xdir/$oldobj; then
+	    $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
+	    $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
+	  fi
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    eval cmds=\"$export_symbols_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd" || exit $?
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex"; then
+	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	fi
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    $show "${rm}r $gentop"
+	    $run ${rm}r "$gentop"
+	    $show "mkdir $gentop"
+	    $run mkdir "$gentop"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$gentop"; then
+	      exit $status
+	    fi
+	    generated="$generated $gentop"
+
+	    for xlib in $convenience; do
+	      # Extract the objects.
+	      case "$xlib" in
+	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	      *) xabs=`pwd`"/$xlib" ;;
+	      esac
+	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	      xdir="$gentop/$xlib"
+
+	      $show "${rm}r $xdir"
+	      $run ${rm}r "$xdir"
+	      $show "mkdir $xdir"
+	      $run mkdir "$xdir"
+	      status=$?
+	      if test $status -ne 0 && test ! -d "$xdir"; then
+		exit $status
+	      fi
+	      $show "(cd $xdir && $AR x $xabs)"
+	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	      libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+	    done
+	  fi
+	fi
+
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  linkopts="$linkopts $flag"
+	fi
+
+	# Do each of the archive commands.
+	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	  eval cmds=\"$archive_expsym_cmds\"
+	else
+	  eval cmds=\"$archive_cmds\"
+	fi
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    *.lo | *.o | *.obj)
+      if test -n "$link_against_libtool_libs"; then
+	$echo "$modename: error: cannot link libtool libraries into objects" 1>&2
+	exit 1
+      fi
+
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+      fi
+
+      case "$output" in
+      *.lo)
+	if test -n "$objs"; then
+	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+	  exit 1
+	fi
+	libobj="$output"
+	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec
+      wl= 
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	else
+	  gentop="$output_objdir/${obj}x"
+	  $show "${rm}r $gentop"
+	  $run ${rm}r "$gentop"
+	  $show "mkdir $gentop"
+	  $run mkdir "$gentop"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$gentop"; then
+	    exit $status
+	  fi
+	  generated="$generated $gentop"
+
+	  for xlib in $convenience; do
+	    # Extract the objects.
+	    case "$xlib" in
+	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	    *) xabs=`pwd`"/$xlib" ;;
+	    esac
+	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	    xdir="$gentop/$xlib"
+
+	    $show "${rm}r $xdir"
+	    $run ${rm}r "$xdir"
+	    $show "mkdir $xdir"
+	    $run mkdir "$xdir"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$xdir"; then
+	      exit $status
+	    fi
+	    $show "(cd $xdir && $AR x $xabs)"
+	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	    reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+	  done
+	fi
+      fi
+
+      # Create the old-style object.
+      reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs"
+
+      output="$obj"
+      eval cmds=\"$reload_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	exit 0
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	$show "echo timestamp > $libobj"
+	$run eval "echo timestamp > $libobj" || exit $?
+	exit 0
+      fi
+
+      if test -n "$pic_flag"; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	eval cmds=\"$reload_cmds\"
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+      else
+	# Just create a symlink.
+	$show $rm $libobj
+	$run $rm $libobj
+	xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$xdir" = "X$libobj"; then
+	  xdir="."
+	else
+	  xdir="$xdir"
+	fi
+	baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+	oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+	$show "(cd $xdir && $LN_S $oldobj $baseobj)"
+	$run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
+      fi
+
+      if test -n "$gentop"; then
+	$show "${rm}r $gentop"
+	$run ${rm}r $gentop
+      fi
+
+      exit 0
+      ;;
+
+    # Anything else should be a program.
+    *)
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+      fi
+
+      if test "$preload" = yes; then
+	if test "$dlopen" = unknown && test "$dlopen_self" = unknown &&
+	   test "$dlopen_self_static" = unknown; then
+	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+	fi 
+      fi
+    
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$compile_rpath " in
+	  *" $libdir "*) ;;
+	  *) compile_rpath="$compile_rpath $libdir" ;;
+	  esac
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) perm_rpath="$perm_rpath $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$output_objdir" = "X$output"; then
+	output_objdir="$objdir"
+      else
+	output_objdir="$output_objdir/$objdir"
+      fi
+
+      # Create the binary in the object directory, then wrap it.
+      if test ! -d $output_objdir; then
+	$show "$mkdir $output_objdir"
+	$run $mkdir $output_objdir
+	status=$?
+	if test $status -ne 0 && test ! -d $output_objdir; then
+	  exit $status
+	fi
+      fi
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+      fi
+
+      dlsyms=
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	  dlsyms="${outputname}S.c"
+	else
+	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+	fi
+      fi
+
+      if test -n "$dlsyms"; then
+	case "$dlsyms" in
+	"") ;;
+	*.c)
+	  # Discover the nlist of each of the dlfiles.
+	  nlist="$output_objdir/${outputname}.nm"
+
+	  $show "$rm $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Parse the name list into a source file.
+	  $show "creating $output_objdir/$dlsyms"
+
+	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+	  if test "$dlself" = yes; then
+	    $show "generating symbol list for \`$output'"
+
+	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+	    # Add our own program objects to the symbol list.
+	    progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	    for arg in $progfiles; do
+	      $show "extracting global C symbols from \`$arg'"
+	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	    done
+
+	    if test -n "$exclude_expsyms"; then
+	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+	    
+	    if test -n "$export_symbols_regex"; then
+	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    # Prepare the list of exported symbols
+	    if test -z "$export_symbols"; then
+	      export_symbols="$output_objdir/$output.exp"
+	      $run $rm $export_symbols
+	      $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	    else
+	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+	      $run eval 'mv "$nlist"T "$nlist"'
+	    fi
+	  fi
+
+	  for arg in $dlprefiles; do
+	    $show "extracting global C symbols from \`$arg'"
+	    name=`echo "$arg" | sed -e 's%^.*/%%'`
+	    $run eval 'echo ": $name " >> "$nlist"'
+	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -z "$run"; then
+	    # Make sure we have at least an empty file.
+	    test -f "$nlist" || : > "$nlist"
+
+	    if test -n "$exclude_expsyms"; then
+	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	      $mv "$nlist"T "$nlist"
+	    fi
+
+	    # Try sorting and uniquifying the output.
+	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
+	      :
+	    else
+	      grep -v "^: " < "$nlist" > "$nlist"S
+	    fi
+
+	    if test -f "$nlist"S; then
+	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+	    else
+	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+	    sed -n -e 's/^: \([^ ]*\) $/  {\"\1\", (lt_ptr_t) 0},/p' \
+		-e 's/^. \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr_t) \&\2},/p' \
+		  < "$nlist" >> "$output_objdir/$dlsyms"
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+  {0, (lt_ptr_t) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	  fi
+
+	  pic_flag_for_symtable=
+	  case "$host" in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)

+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
+	    esac;;
+	  *-*-hpux*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DPIC";;
+	    esac
+	  esac
+
+	  # Now compile the dynamic symbol file.
+	  $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+	  # Clean up the generated files.
+	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Transform the symbol file into the correct name.
+	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  ;;
+	*)
+	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+	  exit 1
+	  ;;
+	esac
+      else
+	# We keep going just in case the user didn't refer to
+	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+	# really was required.
+
+	# Nullify the symbol file.
+	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
+	# Replace the output file specification.
+	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	$show "$link_command"
+	$run eval "$link_command"
+	status=$?
+	
+	# Delete the generated files.
+	if test -n "$dlsyms"; then
+	  $show "$rm $output_objdir/${outputname}S.${objext}"
+	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	fi
+
+	exit $status
+      fi
+
+      if test -n "$shlibpath_var"; then
+	# We should set the shlibpath_var
+	rpath=
+	for dir in $temp_rpath; do
+	  case "$dir" in
+	  [\\/]* | [A-Za-z]:[\\/]*)
+	    # Absolute path.
+	    rpath="$rpath$dir:"
+	    ;;
+	  *)
+	    # Relative path: add a thisdir entry.
+	    rpath="$rpath\$thisdir/$dir:"
+	    ;;
+	  esac
+	done
+	temp_rpath="$rpath"
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+	
+	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      
+      # Delete the old output files.
+      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      $show "$link_command"
+      $run eval "$link_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Quote $echo for shipping.
+      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+	case "$0" in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+	esac
+	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+	esac
+	$rm $output
+	trap "$rm $output; exit 1" 1 2 15
+
+	$echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variable:
+  link_against_libtool_libs='$link_against_libtool_libs'
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    echo=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$echo works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$echo will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+	$echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  echo >> $output "\
+  program=lt-'$outputname'
+  progdir=\"\$thisdir/$objdir\"
+  
+  if test ! -f \"\$progdir/\$program\" || \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $mkdir \"\$progdir\"
+    else
+      $rm \"\$progdir/\$file\"
+    fi"
+
+	  echo >> $output "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if (cd \"\$thisdir\" && eval \$relink_command); then :
+      else
+	$rm \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $rm \"\$progdir/\$program\";
+      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $rm \"\$progdir/\$file\"
+  fi"
+	else
+	  echo >> $output "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	echo >> $output "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $echo >> $output "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	$echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+	case $host in
+	*-*-cygwin* | *-*-mingw | *-*-os2*)
+	  # win32 systems need to use the prog path for dll
+	  # lookup to work
+	  $echo >> $output "\
+      exec \$progdir\\\\\$program \${1+\"\$@\"}
+"
+	  ;;
+	*)
+	  $echo >> $output "\
+      # Export the path to the program.
+      PATH=\"\$progdir:\$PATH\"
+      export PATH
+
+      exec \$program \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$echo >> $output "\
+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+	chmod +x $output
+      fi
+      exit 0
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	$show "${rm}r $gentop"
+	$run ${rm}r "$gentop"
+	$show "mkdir $gentop"
+	$run mkdir "$gentop"
+	status=$?
+	if test $status -ne 0 && test ! -d "$gentop"; then
+	  exit $status
+	fi
+	generated="$generated $gentop"
+	  
+	# Add in members from convenience archives.
+	for xlib in $addlibs; do
+	  # Extract the objects.
+	  case "$xlib" in
+	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	  *) xabs=`pwd`"/$xlib" ;;
+	  esac
+	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	  xdir="$gentop/$xlib"
+
+	  $show "${rm}r $xdir"
+	  $run ${rm}r "$xdir"
+	  $show "mkdir $xdir"
+	  $run mkdir "$xdir"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$xdir"; then
+	    exit $status
+	  fi
+	  $show "(cd $xdir && $AR x $xabs)"
+	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+	done
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	eval cmds=\"$old_archive_from_new_cmds\"
+      else
+	# Ensure that we have .o objects in place in case we decided
+	# not to build a shared library, and have fallen back to building
+	# static libs even though --disable-static was passed!
+	for oldobj in $oldobjs; do
+	  if test ! -f $oldobj; then
+	    xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
+	    if test "X$xdir" = "X$oldobj"; then
+	      xdir="."
+	    else
+	      xdir="$xdir"
+	    fi
+	    baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
+	    obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+	    $show "(cd $xdir && ${LN_S} $obj $baseobj)"
+	    $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+	  fi
+	done
+
+	eval cmds=\"$old_archive_cmds\"
+      fi
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$generated"; then
+      $show "${rm}r$generated"
+      $run ${rm}r$generated
+    fi
+
+    # Now create the libtool archive.
+    case "$output" in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      $show "creating $output"
+
+      if test -n "$xrpath"; then
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  temp_xrpath="$temp_xrpath -R$libdir"
+	done
+	dependency_libs="$temp_xrpath $dependency_libs"
+      fi
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	  fi
+	  $rm $output
+	  $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$dlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'\
+"
+	done
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+      $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $?
+      ;;
+    esac
+    exit 0
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case "$arg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg="$nonopt"
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case "$arg" in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest="$arg"
+	continue
+      fi
+
+      case "$arg" in
+      -d) isdir=yes ;;
+      -f) prev="-f" ;;
+      -g) prev="-g" ;;
+      -m) prev="-m" ;;
+      -o) prev="-o" ;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*) ;;
+
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest="$arg"
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case "$arg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	$echo "$modename: no file or destination specified" 1>&2
+      else
+	$echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test $# -gt 2; then
+	$echo "$modename: \`$dest' is not a directory" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+    fi
+    case "$destdir" in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case "$file" in
+	*.lo) ;;
+	*)
+	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case "$file" in
+      *.a | *.lib)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	library_names=
+	old_library=
+	# If there is no directory component, then add one.
+	case "$file" in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+
+	dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
+	test "X$dir" = "X$file/" && dir=
+	dir="$dir$objdir"
+
+	# See the names of the shared library.
+	set dummy $library_names
+	if test -n "$2"; then
+	  realname="$2"
+	  shift
+	  shift
+
+	  # Install the shared library and build the symlinks.
+	  $show "$install_prog $dir/$realname $destdir/$realname"
+	  $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
+
+	  if test $# -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    for linkname
+	    do
+	      if test "$linkname" != "$realname"; then
+		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+	      fi
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  eval cmds=\"$postinstall_cmds\"
+	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || exit $?
+	  done
+	  IFS="$save_ifs"
+	fi
+
+	# Install the pseudo-library for information purposes.
+	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	instname="$dir/$name"i
+	$show "$install_prog $instname $destdir/$name"
+	$run eval "$install_prog $instname $destdir/$name" || exit $?
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case "$destfile" in
+	*.lo)
+	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+	  ;;
+	*.o | *.obj)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	if test -n "$destfile"; then
+	  $show "$install_prog $file $destfile"
+	  $run eval "$install_prog $file $destfile" || exit $?
+	fi
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+	  $show "$install_prog $staticobj $staticdest"
+	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+	fi
+	exit 0
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Do a test to see if this is really a libtool program.
+	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  link_against_libtool_libs=
+	  relink_command=
+
+	  # If there is no directory component, then add one.
+	  case "$file" in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Check the variables that should have been set.
+	  if test -z "$link_against_libtool_libs"; then
+	    $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+	    exit 1
+	  fi
+
+	  finalize=yes
+	  for lib in $link_against_libtool_libs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      # If there is no directory component, then add one.
+	      case "$lib" in
+	      */* | *\\*) . $lib ;;
+	      *) . ./$lib ;;
+	      esac
+	    fi
+	    libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+	      finalize=no
+	    fi
+	  done
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    if test "$finalize" = yes && test -z "$run"; then
+	      tmpdir="/tmp"
+	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
+	      tmpdir="$tmpdir/libtool-$$"
+	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+	      else
+		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+		continue
+	      fi
+	      outputname="$tmpdir/$file"
+	      # Replace the output file specification.
+	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+	      $show "$relink_command"
+	      if $run eval "$relink_command"; then :
+	      else
+		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+		${rm}r "$tmpdir"
+		continue
+	      fi
+	      file="$outputname"
+	    else
+	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
+	    fi
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	$show "$install_prog$stripme $file $destfile"
+	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+	test -n "$outputname" && ${rm}r "$tmpdir"
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      # Do each command in the postinstall commands.
+      eval cmds=\"$old_postinstall_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec $SHELL $0 --finish$current_libdirs
+      exit 1
+    fi
+
+    exit 0
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  eval cmds=\"$finish_cmds\"
+	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || admincmds="$admincmds
+       $cmd"
+	  done
+	  IFS="$save_ifs"
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $run eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    test "$show" = : && exit 0
+
+    echo "----------------------------------------------------------------------"
+    echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      echo "   $libdir"
+    done
+    echo
+    echo "If you ever happen to want to link against installed libraries"
+    echo "in a given directory, LIBDIR, you must either use libtool, and"
+    echo "specify the full pathname of the library, or use \`-LLIBDIR'"
+    echo "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      echo "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      echo "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    echo
+    echo "See any operating system documentation about shared libraries for"
+    echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    echo "----------------------------------------------------------------------"
+    exit 0
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit 1
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test ! -f "$file"; then
+	$echo "$modename: \`$file' is not a file" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+
+      dir=
+      case "$file" in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+
+	# If there is no directory component, then add one.
+	case "$file" in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	  exit 1
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+	;;
+
+      *)
+	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case "$file" in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  # If there is no directory component, then add one.
+	  case "$file" in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      if test -n "$shlibpath_var"; then
+        # Export the shlibpath_var.
+        eval "export $shlibpath_var"
+      fi
+
+      # Restore saved enviroment variables
+      if test "${save_LC_ALL+set}" = set; then
+	LC_ALL="$save_LC_ALL"; export LC_ALL
+      fi
+      if test "${save_LANG+set}" = set; then
+	LANG="$save_LANG"; export LANG
+      fi
+
+      # Now actually exec the command.
+      eval "exec \$cmd$args"
+
+      $echo "$modename: cannot exec \$cmd$args"
+      exit 1
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+        eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+        $echo "export $shlibpath_var"
+      fi
+      $echo "$cmd$args"
+      exit 0
+    fi
+    ;;
+
+  # libtool uninstall mode
+  uninstall)
+    modename="$modename: uninstall"
+    rm="$nonopt"
+    files=
+
+    for arg
+    do
+      case "$arg" in
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$dir" = "X$file" && dir=.
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      rmfiles="$file"
+
+      case "$name" in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  . $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    rmfiles="$rmfiles $dir/$n"
+	  done
+	  test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
+
+	  $show "$rm $rmfiles"
+	  $run $rm $rmfiles
+
+	  if test -n "$library_names"; then
+	    # Do each command in the postuninstall commands.
+	    eval cmds=\"$postuninstall_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd"
+	    done
+	    IFS="$save_ifs"
+	  fi
+
+	  if test -n "$old_library"; then
+	    # Do each command in the old_postuninstall commands.
+	    eval cmds=\"$old_postuninstall_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd"
+	    done
+	    IFS="$save_ifs"
+	  fi
+
+	  # FIXME: should reinstall the best remaining shared library.
+	fi
+	;;
+
+      *.lo)
+	if test "$build_old_libs" = yes; then
+	  oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
+	  rmfiles="$rmfiles $dir/$oldobj"
+	fi
+	$show "$rm $rmfiles"
+	$run $rm $rmfiles
+	;;
+
+      *)
+	$show "$rm $rmfiles"
+	$run $rm $rmfiles
+	;;
+      esac
+    done
+    exit 0
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit 1
+    ;;
+  esac
+
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$generic_help" 1>&2
+  exit 1
+fi # test -z "$show_help"
+
+# We need to display help for each of the modes.
+case "$mode" in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+    --config          show all configuration variables
+    --debug           enable verbose shell tracing
+-n, --dry-run         display commands without modifying any files
+    --features        display basic configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --version         print version information
+
+MODE must be one of the following:
+
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE."
+  exit 0
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -static           always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+		    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+		    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -static           do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+		    specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+  ;;
+esac
+
+echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/srclib/pcre/maketables.c b/srclib/pcre/maketables.c
new file mode 100644
index 0000000000..c0f06c0375
--- /dev/null
+++ b/srclib/pcre/maketables.c
@@ -0,0 +1,132 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+/*
+PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language.
+
+Written by: Philip Hazel <ph10@cam.ac.uk>
+
+           Copyright (c) 1997-2000 University of Cambridge
+
+-----------------------------------------------------------------------------
+Permission is granted to anyone to use this software for any purpose on any
+computer system, and to redistribute it freely, subject to the following
+restrictions:
+
+1. This software is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+2. The origin of this software must not be misrepresented, either by
+   explicit claim or by omission.
+
+3. Altered versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+
+4. If PCRE is embedded in any software that is released under the GNU
+   General Purpose Licence (GPL), then the terms of that licence shall
+   supersede any condition above with which it is incompatible.
+-----------------------------------------------------------------------------
+
+See the file Tech.Notes for some information on the internals.
+*/
+
+
+/* This file is compiled on its own as part of the PCRE library. However,
+it is also included in the compilation of dftables.c, in which case the macro
+DFTABLES is defined. */
+
+#ifndef DFTABLES
+#include "internal.h"
+#endif
+
+
+
+/*************************************************
+*           Create PCRE character tables         *
+*************************************************/
+
+/* This function builds a set of character tables for use by PCRE and returns
+a pointer to them. They are build using the ctype functions, and consequently
+their contents will depend upon the current locale setting. When compiled as
+part of the library, the store is obtained via pcre_malloc(), but when compiled
+inside dftables, use malloc().
+
+Arguments:   none
+Returns:     pointer to the contiguous block of data
+*/
+
+unsigned const char *
+pcre_maketables(void)
+{
+unsigned char *yield, *p;
+int i;
+
+#ifndef DFTABLES
+yield = (unsigned char*)(pcre_malloc)(tables_length);
+#else
+yield = (unsigned char*)malloc(tables_length);
+#endif
+
+if (yield == NULL) return NULL;
+p = yield;
+
+/* First comes the lower casing table */
+
+for (i = 0; i < 256; i++) *p++ = tolower(i);
+
+/* Next the case-flipping table */
+
+for (i = 0; i < 256; i++) *p++ = islower(i)? toupper(i) : tolower(i);
+
+/* Then the character class tables. Don't try to be clever and save effort
+on exclusive ones - in some locales things may be different. */
+
+memset(p, 0, cbit_length);
+for (i = 0; i < 256; i++)
+  {
+  if (isdigit(i))
+    {
+    p[cbit_digit  + i/8] |= 1 << (i&7);
+    p[cbit_word   + i/8] |= 1 << (i&7);
+    }
+  if (isupper(i))
+    {
+    p[cbit_upper  + i/8] |= 1 << (i&7);
+    p[cbit_word   + i/8] |= 1 << (i&7);
+    }
+  if (islower(i))
+    {
+    p[cbit_lower  + i/8] |= 1 << (i&7);
+    p[cbit_word   + i/8] |= 1 << (i&7);
+    }
+  if (i == '_')   p[cbit_word   + i/8] |= 1 << (i&7);
+  if (isspace(i)) p[cbit_space  + i/8] |= 1 << (i&7);
+  if (isxdigit(i))p[cbit_xdigit + i/8] |= 1 << (i&7);
+  if (isgraph(i)) p[cbit_graph  + i/8] |= 1 << (i&7);
+  if (isprint(i)) p[cbit_print  + i/8] |= 1 << (i&7);
+  if (ispunct(i)) p[cbit_punct  + i/8] |= 1 << (i&7);
+  if (iscntrl(i)) p[cbit_cntrl  + i/8] |= 1 << (i&7);
+  }
+p += cbit_length;
+
+/* Finally, the character type table */
+
+for (i = 0; i < 256; i++)
+  {
+  int x = 0;
+  if (isspace(i)) x += ctype_space;
+  if (isalpha(i)) x += ctype_letter;
+  if (isdigit(i)) x += ctype_digit;
+  if (isxdigit(i)) x += ctype_xdigit;
+  if (isalnum(i) || i == '_') x += ctype_word;
+  if (strchr("*+?{^.$|()[", i) != 0) x += ctype_meta;
+  *p++ = x;
+  }
+
+return yield;
+}
+
+/* End of maketables.c */
diff --git a/srclib/pcre/pcre-config.in b/srclib/pcre/pcre-config.in
new file mode 100644
index 0000000000..8daded9fe1
--- /dev/null
+++ b/srclib/pcre/pcre-config.in
@@ -0,0 +1,59 @@
+#!/bin/sh
+
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+exec_prefix_set=no
+
+usage="\
+Usage: pcre-config [--prefix] [--exec-prefix] [--version] [--libs] [--libs-posix] [--cflags] [--cflags-posix]"
+
+if test $# -eq 0; then
+      echo "${usage}" 1>&2
+      exit 1
+fi
+
+while test $# -gt 0; do
+  case "$1" in
+  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  case $1 in
+    --prefix=*)
+      prefix=$optarg
+      if test $exec_prefix_set = no ; then
+        exec_prefix=$optarg
+      fi
+      ;;
+    --prefix)
+      echo $prefix
+      ;;
+    --exec-prefix=*)
+      exec_prefix=$optarg
+      exec_prefix_set=yes
+      ;;
+    --exec-prefix)
+      echo $exec_prefix
+      ;;
+    --version)
+      echo @PCRE_VERSION@
+      ;;
+    --cflags | --cflags-posix)
+      if test @includedir@ != /usr/include ; then
+        includes=-I@includedir@
+      fi
+      echo $includes
+      ;;
+    --libs-posix)
+      echo -L@libdir@ -lpcreposix -lpcre
+      ;;
+    --libs)
+      echo -L@libdir@ -lpcre
+      ;;
+    *)
+      echo "${usage}" 1>&2
+      exit 1
+      ;;
+  esac
+  shift
+done
diff --git a/srclib/pcre/pcre.c b/srclib/pcre/pcre.c
new file mode 100644
index 0000000000..e45dee8d96
--- /dev/null
+++ b/srclib/pcre/pcre.c
@@ -0,0 +1,4769 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+/*
+This is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language. See
+the file Tech.Notes for some information on the internals.
+
+Written by: Philip Hazel <ph10@cam.ac.uk>
+
+           Copyright (c) 1997-2000 University of Cambridge
+
+-----------------------------------------------------------------------------
+Permission is granted to anyone to use this software for any purpose on any
+computer system, and to redistribute it freely, subject to the following
+restrictions:
+
+1. This software is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+2. The origin of this software must not be misrepresented, either by
+   explicit claim or by omission.
+
+3. Altered versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+
+4. If PCRE is embedded in any software that is released under the GNU
+   General Purpose Licence (GPL), then the terms of that licence shall
+   supersede any condition above with which it is incompatible.
+-----------------------------------------------------------------------------
+*/
+
+
+/* Define DEBUG to get debugging output on stdout. */
+
+/* #define DEBUG */
+
+/* Use a macro for debugging printing, 'cause that eliminates the use of #ifdef
+inline, and there are *still* stupid compilers about that don't like indented
+pre-processor statements. I suppose it's only been 10 years... */
+
+#ifdef DEBUG
+#define DPRINTF(p) printf p
+#else
+#define DPRINTF(p) /*nothing*/
+#endif
+
+/* Include the internals header, which itself includes Standard C headers plus
+the external pcre header. */
+
+#include "internal.h"
+
+
+/* Allow compilation as C++ source code, should anybody want to do that. */
+
+#ifdef __cplusplus
+#define class pcre_class
+#endif
+
+
+/* Number of items on the nested bracket stacks at compile time. This should
+not be set greater than 200. */
+
+#define BRASTACK_SIZE 200
+
+
+/* Min and max values for the common repeats; for the maxima, 0 => infinity */
+
+static const char rep_min[] = { 0, 0, 1, 1, 0, 0 };
+static const char rep_max[] = { 0, 0, 0, 0, 1, 1 };
+
+/* Text forms of OP_ values and things, for debugging (not all used) */
+
+#ifdef DEBUG
+static const char *OP_names[] = {
+  "End", "\\A", "\\B", "\\b", "\\D", "\\d",
+  "\\S", "\\s", "\\W", "\\w", "\\Z", "\\z",
+  "Opt", "^", "$", "Any", "chars", "not",
+  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",
+  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",
+  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",
+  "*", "*?", "+", "+?", "?", "??", "{", "{",
+  "class", "Ref", "Recurse",
+  "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not",
+  "AssertB", "AssertB not", "Reverse", "Once", "Cond", "Cref",
+  "Brazero", "Braminzero", "Bra"
+};
+#endif
+
+/* Table for handling escaped characters in the range '0'-'z'. Positive returns
+are simple data values; negative values are for special things like \d and so
+on. Zero means further processing is needed (for things like \x), or the escape
+is invalid. */
+
+static const short int escapes[] = {
+    0,      0,      0,      0,      0,      0,      0,      0,   /* 0 - 7 */
+    0,      0,    ':',    ';',    '<',    '=',    '>',    '?',   /* 8 - ? */
+  '@', -ESC_A, -ESC_B,      0, -ESC_D,      0,      0,      0,   /* @ - G */
+    0,      0,      0,      0,      0,      0,      0,      0,   /* H - O */
+    0,      0,      0, -ESC_S,      0,      0,      0, -ESC_W,   /* P - W */
+    0,      0, -ESC_Z,    '[',   '\\',    ']',    '^',    '_',   /* X - _ */
+  '`',      7, -ESC_b,      0, -ESC_d,     27,   '\f',      0,   /* ` - g */
+    0,      0,      0,      0,      0,      0,   '\n',      0,   /* h - o */
+    0,      0,   '\r', -ESC_s,   '\t',      0,      0, -ESC_w,   /* p - w */
+    0,      0, -ESC_z                                            /* x - z */
+};
+
+/* Tables of names of POSIX character classes and their lengths. The list is
+terminated by a zero length entry. The first three must be alpha, upper, lower,
+as this is assumed for handling case independence. */
+
+static const char *posix_names[] = {
+  "alpha", "lower", "upper",
+  "alnum", "ascii", "cntrl", "digit", "graph",
+  "print", "punct", "space", "word",  "xdigit" };
+
+static const uschar posix_name_lengths[] = {
+  5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 };
+
+/* Table of class bit maps for each POSIX class; up to three may be combined
+to form the class. */
+
+static const int posix_class_maps[] = {
+  cbit_lower, cbit_upper, -1,             /* alpha */
+  cbit_lower, -1,         -1,             /* lower */
+  cbit_upper, -1,         -1,             /* upper */
+  cbit_digit, cbit_lower, cbit_upper,     /* alnum */
+  cbit_print, cbit_cntrl, -1,             /* ascii */
+  cbit_cntrl, -1,         -1,             /* cntrl */
+  cbit_digit, -1,         -1,             /* digit */
+  cbit_graph, -1,         -1,             /* graph */
+  cbit_print, -1,         -1,             /* print */
+  cbit_punct, -1,         -1,             /* punct */
+  cbit_space, -1,         -1,             /* space */
+  cbit_word,  -1,         -1,             /* word */
+  cbit_xdigit,-1,         -1              /* xdigit */
+};
+
+
+/* Definition to allow mutual recursion */
+
+static BOOL
+  compile_regex(int, int, int *, uschar **, const uschar **, const char **,
+    BOOL, int, int *, int *, compile_data *);
+
+
+
+/*************************************************
+*               Global variables                 *
+*************************************************/
+
+/* PCRE is thread-clean and doesn't use any global variables in the normal
+sense. However, it calls memory allocation and free functions via the two
+indirections below, which are can be changed by the caller, but are shared
+between all threads. */
+
+void *(*pcre_malloc)(size_t) = malloc;
+void  (*pcre_free)(void *) = free;
+
+
+
+
+/*************************************************
+*             Default character tables           *
+*************************************************/
+
+/* A default set of character tables is included in the PCRE binary. Its source
+is built by the maketables auxiliary program, which uses the default C ctypes
+functions, and put in the file chartables.c. These tables are used by PCRE
+whenever the caller of pcre_compile() does not provide an alternate set of
+tables. */
+
+#include "chartables.c"
+
+
+
+/*************************************************
+*          Return version string                 *
+*************************************************/
+
+#define STRING(a)  # a
+#define XSTRING(s) STRING(s)
+
+const char *
+pcre_version(void)
+{
+return XSTRING(PCRE_MAJOR) "." XSTRING(PCRE_MINOR) " " XSTRING(PCRE_DATE);
+}
+
+
+
+
+/*************************************************
+* (Obsolete) Return info about compiled pattern  *
+*************************************************/
+
+/* This is the original "info" function. It picks potentially useful data out
+of the private structure, but its interface was too rigid. It remains for
+backwards compatibility. The public options are passed back in an int - though
+the re->options field has been expanded to a long int, all the public options
+at the low end of it, and so even on 16-bit systems this will still be OK.
+Therefore, I haven't changed the API for pcre_info().
+
+Arguments:
+  external_re   points to compiled code
+  optptr        where to pass back the options
+  first_char    where to pass back the first character,
+                or -1 if multiline and all branches start ^,
+                or -2 otherwise
+
+Returns:        number of capturing subpatterns
+                or negative values on error
+*/
+
+int
+pcre_info(const pcre *external_re, int *optptr, int *first_char)
+{
+const real_pcre *re = (const real_pcre *)external_re;
+if (re == NULL) return PCRE_ERROR_NULL;
+if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC;
+if (optptr != NULL) *optptr = (int)(re->options & PUBLIC_OPTIONS);
+if (first_char != NULL)
+  *first_char = ((re->options & PCRE_FIRSTSET) != 0)? re->first_char :
+     ((re->options & PCRE_STARTLINE) != 0)? -1 : -2;
+return re->top_bracket;
+}
+
+
+
+/*************************************************
+*        Return info about compiled pattern      *
+*************************************************/
+
+/* This is a newer "info" function which has an extensible interface so
+that additional items can be added compatibly.
+
+Arguments:
+  external_re      points to compiled code
+  external_study   points to study data, or NULL
+  what             what information is required
+  where            where to put the information
+
+Returns:           0 if data returned, negative on error
+*/
+
+int
+pcre_fullinfo(const pcre *external_re, const pcre_extra *study_data, int what,
+  void *where)
+{
+const real_pcre *re = (const real_pcre *)external_re;
+const real_pcre_extra *study = (const real_pcre_extra *)study_data;
+
+if (re == NULL || where == NULL) return PCRE_ERROR_NULL;
+if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC;
+
+switch (what)
+  {
+  case PCRE_INFO_OPTIONS:
+  *((unsigned long int *)where) = re->options & PUBLIC_OPTIONS;
+  break;
+
+  case PCRE_INFO_SIZE:
+  *((size_t *)where) = re->size;
+  break;
+
+  case PCRE_INFO_CAPTURECOUNT:
+  *((int *)where) = re->top_bracket;
+  break;
+
+  case PCRE_INFO_BACKREFMAX:
+  *((int *)where) = re->top_backref;
+  break;
+
+  case PCRE_INFO_FIRSTCHAR:
+  *((int *)where) =
+    ((re->options & PCRE_FIRSTSET) != 0)? re->first_char :
+    ((re->options & PCRE_STARTLINE) != 0)? -1 : -2;
+  break;
+
+  case PCRE_INFO_FIRSTTABLE:
+  *((const uschar **)where) =
+    (study != NULL && (study->options & PCRE_STUDY_MAPPED) != 0)?
+      study->start_bits : NULL;
+  break;
+
+  case PCRE_INFO_LASTLITERAL:
+  *((int *)where) =
+    ((re->options & PCRE_REQCHSET) != 0)? re->req_char : -1;
+  break;
+
+  default: return PCRE_ERROR_BADOPTION;
+  }
+
+return 0;
+}
+
+
+
+#ifdef DEBUG
+/*************************************************
+*        Debugging function to print chars       *
+*************************************************/
+
+/* Print a sequence of chars in printable format, stopping at the end of the
+subject if the requested.
+
+Arguments:
+  p           points to characters
+  length      number to print
+  is_subject  TRUE if printing from within md->start_subject
+  md          pointer to matching data block, if is_subject is TRUE
+
+Returns:     nothing
+*/
+
+static void
+pchars(const uschar *p, int length, BOOL is_subject, match_data *md)
+{
+int c;
+if (is_subject && length > md->end_subject - p) length = md->end_subject - p;
+while (length-- > 0)
+  if (isprint(c = *(p++))) printf("%c", c); else printf("\\x%02x", c);
+}
+#endif
+
+
+
+
+/*************************************************
+*            Handle escapes                      *
+*************************************************/
+
+/* This function is called when a \ has been encountered. It either returns a
+positive value for a simple escape such as \n, or a negative value which
+encodes one of the more complicated things such as \d. On entry, ptr is
+pointing at the \. On exit, it is on the final character of the escape
+sequence.
+
+Arguments:
+  ptrptr     points to the pattern position pointer
+  errorptr   points to the pointer to the error message
+  bracount   number of previous extracting brackets
+  options    the options bits
+  isclass    TRUE if inside a character class
+  cd         pointer to char tables block
+
+Returns:     zero or positive => a data character
+             negative => a special escape sequence
+             on error, errorptr is set
+*/
+
+static int
+check_escape(const uschar **ptrptr, const char **errorptr, int bracount,
+  int options, BOOL isclass, compile_data *cd)
+{
+const uschar *ptr = *ptrptr;
+int c, i;
+
+c = *(++ptr) & 255;   /* Ensure > 0 on signed-char systems */
+if (c == 0) *errorptr = ERR1;
+
+/* Digits or letters may have special meaning; all others are literals. */
+
+else if (c < '0' || c > 'z') {}
+
+/* Do an initial lookup in a table. A non-zero result is something that can be
+returned immediately. Otherwise further processing may be required. */
+
+else if ((i = escapes[c - '0']) != 0) c = i;
+
+/* Escapes that need further processing, or are illegal. */
+
+else
+  {
+  const uschar *oldptr;
+  switch (c)
+    {
+    /* The handling of escape sequences consisting of a string of digits
+    starting with one that is not zero is not straightforward. By experiment,
+    the way Perl works seems to be as follows:
+
+    Outside a character class, the digits are read as a decimal number. If the
+    number is less than 10, or if there are that many previous extracting
+    left brackets, then it is a back reference. Otherwise, up to three octal
+    digits are read to form an escaped byte. Thus \123 is likely to be octal
+    123 (cf \0123, which is octal 012 followed by the literal 3). If the octal
+    value is greater than 377, the least significant 8 bits are taken. Inside a
+    character class, \ followed by a digit is always an octal number. */
+
+    case '1': case '2': case '3': case '4': case '5':
+    case '6': case '7': case '8': case '9':
+
+    if (!isclass)
+      {
+      oldptr = ptr;
+      c -= '0';
+      while ((cd->ctypes[ptr[1]] & ctype_digit) != 0)
+        c = c * 10 + *(++ptr) - '0';
+      if (c < 10 || c <= bracount)
+        {
+        c = -(ESC_REF + c);
+        break;
+        }
+      ptr = oldptr;      /* Put the pointer back and fall through */
+      }
+
+    /* Handle an octal number following \. If the first digit is 8 or 9, Perl
+    generates a binary zero byte and treats the digit as a following literal.
+    Thus we have to pull back the pointer by one. */
+
+    if ((c = *ptr) >= '8')
+      {
+      ptr--;
+      c = 0;
+      break;
+      }
+
+    /* \0 always starts an octal number, but we may drop through to here with a
+    larger first octal digit */
+
+    case '0':
+    c -= '0';
+    while(i++ < 2 && (cd->ctypes[ptr[1]] & ctype_digit) != 0 &&
+      ptr[1] != '8' && ptr[1] != '9')
+        c = c * 8 + *(++ptr) - '0';
+    break;
+
+    /* Special escapes not starting with a digit are straightforward */
+
+    case 'x':
+    c = 0;
+    while (i++ < 2 && (cd->ctypes[ptr[1]] & ctype_xdigit) != 0)
+      {
+      ptr++;
+      c = c * 16 + cd->lcc[*ptr] -
+        (((cd->ctypes[*ptr] & ctype_digit) != 0)? '0' : 'W');
+      }
+    break;
+
+    case 'c':
+    c = *(++ptr);
+    if (c == 0)
+      {
+      *errorptr = ERR2;
+      return 0;
+      }
+
+    /* A letter is upper-cased; then the 0x40 bit is flipped */
+
+    if (c >= 'a' && c <= 'z') c = cd->fcc[c];
+    c ^= 0x40;
+    break;
+
+    /* PCRE_EXTRA enables extensions to Perl in the matter of escapes. Any
+    other alphameric following \ is an error if PCRE_EXTRA was set; otherwise,
+    for Perl compatibility, it is a literal. This code looks a bit odd, but
+    there used to be some cases other than the default, and there may be again
+    in future, so I haven't "optimized" it. */
+
+    default:
+    if ((options & PCRE_EXTRA) != 0) switch(c)
+      {
+      default:
+      *errorptr = ERR3;
+      break;
+      }
+    break;
+    }
+  }
+
+*ptrptr = ptr;
+return c;
+}
+
+
+
+/*************************************************
+*            Check for counted repeat            *
+*************************************************/
+
+/* This function is called when a '{' is encountered in a place where it might
+start a quantifier. It looks ahead to see if it really is a quantifier or not.
+It is only a quantifier if it is one of the forms {ddd} {ddd,} or {ddd,ddd}
+where the ddds are digits.
+
+Arguments:
+  p         pointer to the first char after '{'
+  cd        pointer to char tables block
+
+Returns:    TRUE or FALSE
+*/
+
+static BOOL
+is_counted_repeat(const uschar *p, compile_data *cd)
+{
+if ((cd->ctypes[*p++] & ctype_digit) == 0) return FALSE;
+while ((cd->ctypes[*p] & ctype_digit) != 0) p++;
+if (*p == '}') return TRUE;
+
+if (*p++ != ',') return FALSE;
+if (*p == '}') return TRUE;
+
+if ((cd->ctypes[*p++] & ctype_digit) == 0) return FALSE;
+while ((cd->ctypes[*p] & ctype_digit) != 0) p++;
+return (*p == '}');
+}
+
+
+
+/*************************************************
+*         Read repeat counts                     *
+*************************************************/
+
+/* Read an item of the form {n,m} and return the values. This is called only
+after is_counted_repeat() has confirmed that a repeat-count quantifier exists,
+so the syntax is guaranteed to be correct, but we need to check the values.
+
+Arguments:
+  p          pointer to first char after '{'
+  minp       pointer to int for min
+  maxp       pointer to int for max
+             returned as -1 if no max
+  errorptr   points to pointer to error message
+  cd         pointer to character tables clock
+
+Returns:     pointer to '}' on success;
+             current ptr on error, with errorptr set
+*/
+
+static const uschar *
+read_repeat_counts(const uschar *p, int *minp, int *maxp,
+  const char **errorptr, compile_data *cd)
+{
+int min = 0;
+int max = -1;
+
+while ((cd->ctypes[*p] & ctype_digit) != 0) min = min * 10 + *p++ - '0';
+
+if (*p == '}') max = min; else
+  {
+  if (*(++p) != '}')
+    {
+    max = 0;
+    while((cd->ctypes[*p] & ctype_digit) != 0) max = max * 10 + *p++ - '0';
+    if (max < min)
+      {
+      *errorptr = ERR4;
+      return p;
+      }
+    }
+  }
+
+/* Do paranoid checks, then fill in the required variables, and pass back the
+pointer to the terminating '}'. */
+
+if (min > 65535 || max > 65535)
+  *errorptr = ERR5;
+else
+  {
+  *minp = min;
+  *maxp = max;
+  }
+return p;
+}
+
+
+
+/*************************************************
+*        Find the fixed length of a pattern      *
+*************************************************/
+
+/* Scan a pattern and compute the fixed length of subject that will match it,
+if the length is fixed. This is needed for dealing with backward assertions.
+
+Arguments:
+  code     points to the start of the pattern (the bracket)
+
+Returns:   the fixed length, or -1 if there is no fixed length
+*/
+
+static int
+find_fixedlength(uschar *code)
+{
+int length = -1;
+
+register int branchlength = 0;
+register uschar *cc = code + 3;
+
+/* Scan along the opcodes for this branch. If we get to the end of the
+branch, check the length against that of the other branches. */
+
+for (;;)
+  {
+  int d;
+  register int op = *cc;
+  if (op >= OP_BRA) op = OP_BRA;
+
+  switch (op)
+    {
+    case OP_BRA:
+    case OP_ONCE:
+    case OP_COND:
+    d = find_fixedlength(cc);
+    if (d < 0) return -1;
+    branchlength += d;
+    do cc += (cc[1] << 8) + cc[2]; while (*cc == OP_ALT);
+    cc += 3;
+    break;
+
+    /* Reached end of a branch; if it's a ket it is the end of a nested
+    call. If it's ALT it is an alternation in a nested call. If it is
+    END it's the end of the outer call. All can be handled by the same code. */
+
+    case OP_ALT:
+    case OP_KET:
+    case OP_KETRMAX:
+    case OP_KETRMIN:
+    case OP_END:
+    if (length < 0) length = branchlength;
+      else if (length != branchlength) return -1;
+    if (*cc != OP_ALT) return length;
+    cc += 3;
+    branchlength = 0;
+    break;
+
+    /* Skip over assertive subpatterns */
+
+    case OP_ASSERT:
+    case OP_ASSERT_NOT:
+    case OP_ASSERTBACK:
+    case OP_ASSERTBACK_NOT:
+    do cc += (cc[1] << 8) + cc[2]; while (*cc == OP_ALT);
+    cc += 3;
+    break;
+
+    /* Skip over things that don't match chars */
+
+    case OP_REVERSE:
+    cc++;
+    /* Fall through */
+
+    case OP_CREF:
+    case OP_OPT:
+    cc++;
+    /* Fall through */
+
+    case OP_SOD:
+    case OP_EOD:
+    case OP_EODN:
+    case OP_CIRC:
+    case OP_DOLL:
+    case OP_NOT_WORD_BOUNDARY:
+    case OP_WORD_BOUNDARY:
+    cc++;
+    break;
+
+    /* Handle char strings */
+
+    case OP_CHARS:
+    branchlength += *(++cc);
+    cc += *cc + 1;
+    break;
+
+    /* Handle exact repetitions */
+
+    case OP_EXACT:
+    case OP_TYPEEXACT:
+    branchlength += (cc[1] << 8) + cc[2];
+    cc += 4;
+    break;
+
+    /* Handle single-char matchers */
+
+    case OP_NOT_DIGIT:
+    case OP_DIGIT:
+    case OP_NOT_WHITESPACE:
+    case OP_WHITESPACE:
+    case OP_NOT_WORDCHAR:
+    case OP_WORDCHAR:
+    case OP_ANY:
+    branchlength++;
+    cc++;
+    break;
+
+
+    /* Check a class for variable quantification */
+
+    case OP_CLASS:
+    cc += (*cc == OP_REF)? 2 : 33;
+
+    switch (*cc)
+      {
+      case OP_CRSTAR:
+      case OP_CRMINSTAR:
+      case OP_CRQUERY:
+      case OP_CRMINQUERY:
+      return -1;
+
+      case OP_CRRANGE:
+      case OP_CRMINRANGE:
+      if ((cc[1] << 8) + cc[2] != (cc[3] << 8) + cc[4]) return -1;
+      branchlength += (cc[1] << 8) + cc[2];
+      cc += 5;
+      break;
+
+      default:
+      branchlength++;
+      }
+    break;
+
+    /* Anything else is variable length */
+
+    default:
+    return -1;
+    }
+  }
+/* Control never gets here */
+}
+
+
+
+
+/*************************************************
+*           Check for POSIX class syntax         *
+*************************************************/
+
+/* This function is called when the sequence "[:" or "[." or "[=" is
+encountered in a character class. It checks whether this is followed by an
+optional ^ and then a sequence of letters, terminated by a matching ":]" or
+".]" or "=]".
+
+Argument:
+  ptr      pointer to the initial [
+  endptr   where to return the end pointer
+  cd       pointer to compile data
+
+Returns:   TRUE or FALSE
+*/
+
+static BOOL
+check_posix_syntax(const uschar *ptr, const uschar **endptr, compile_data *cd)
+{
+int terminator;          /* Don't combine these lines; the Solaris cc */
+terminator = *(++ptr);   /* compiler warns about "non-constant" initializer. */
+if (*(++ptr) == '^') ptr++;
+while ((cd->ctypes[*ptr] & ctype_letter) != 0) ptr++;
+if (*ptr == terminator && ptr[1] == ']')
+  {
+  *endptr = ptr;
+  return TRUE;
+  }
+return FALSE;
+}
+
+
+
+
+/*************************************************
+*          Check POSIX class name                *
+*************************************************/
+
+/* This function is called to check the name given in a POSIX-style class entry
+such as [:alnum:].
+
+Arguments:
+  ptr        points to the first letter
+  len        the length of the name
+
+Returns:     a value representing the name, or -1 if unknown
+*/
+
+static int
+check_posix_name(const uschar *ptr, int len)
+{
+register int yield = 0;
+while (posix_name_lengths[yield] != 0)
+  {
+  if (len == posix_name_lengths[yield] &&
+    strncmp((const char *)ptr, posix_names[yield], len) == 0) return yield;
+  yield++;
+  }
+return -1;
+}
+
+
+
+
+/*************************************************
+*           Compile one branch                   *
+*************************************************/
+
+/* Scan the pattern, compiling it into the code vector.
+
+Arguments:
+  options      the option bits
+  brackets     points to number of brackets used
+  code         points to the pointer to the current code point
+  ptrptr       points to the current pattern pointer
+  errorptr     points to pointer to error message
+  optchanged   set to the value of the last OP_OPT item compiled
+  reqchar      set to the last literal character required, else -1
+  countlits    set to count of mandatory literal characters
+  cd           contains pointers to tables
+
+Returns:       TRUE on success
+               FALSE, with *errorptr set on error
+*/
+
+static BOOL
+compile_branch(int options, int *brackets, uschar **codeptr,
+  const uschar **ptrptr, const char **errorptr, int *optchanged,
+  int *reqchar, int *countlits, compile_data *cd)
+{
+int repeat_type, op_type;
+int repeat_min, repeat_max;
+int bravalue, length;
+int greedy_default, greedy_non_default;
+int prevreqchar;
+int condcount = 0;
+int subcountlits = 0;
+register int c;
+register uschar *code = *codeptr;
+uschar *tempcode;
+const uschar *ptr = *ptrptr;
+const uschar *tempptr;
+uschar *previous = NULL;
+uschar class[32];
+
+/* Set up the default and non-default settings for greediness */
+
+greedy_default = ((options & PCRE_UNGREEDY) != 0);
+greedy_non_default = greedy_default ^ 1;
+
+/* Initialize no required char, and count of literals */
+
+*reqchar = prevreqchar = -1;
+*countlits = 0;
+
+/* Switch on next character until the end of the branch */
+
+for (;; ptr++)
+  {
+  BOOL negate_class;
+  int class_charcount;
+  int class_lastchar;
+  int newoptions;
+  int condref;
+  int subreqchar;
+
+  c = *ptr;
+  if ((options & PCRE_EXTENDED) != 0)
+    {
+    if ((cd->ctypes[c] & ctype_space) != 0) continue;
+    if (c == '#')
+      {
+      while ((c = *(++ptr)) != 0 && c != '\n');
+      continue;
+      }
+    }
+
+  switch(c)
+    {
+    /* The branch terminates at end of string, |, or ). */
+
+    case 0:
+    case '|':
+    case ')':
+    *codeptr = code;
+    *ptrptr = ptr;
+    return TRUE;
+
+    /* Handle single-character metacharacters */
+
+    case '^':
+    previous = NULL;
+    *code++ = OP_CIRC;
+    break;
+
+    case '$':
+    previous = NULL;
+    *code++ = OP_DOLL;
+    break;
+
+    case '.':
+    previous = code;
+    *code++ = OP_ANY;
+    break;
+
+    /* Character classes. These always build a 32-byte bitmap of the permitted
+    characters, except in the special case where there is only one character.
+    For negated classes, we build the map as usual, then invert it at the end.
+    */
+
+    case '[':
+    previous = code;
+    *code++ = OP_CLASS;
+
+    /* If the first character is '^', set the negation flag and skip it. */
+
+    if ((c = *(++ptr)) == '^')
+      {
+      negate_class = TRUE;
+      c = *(++ptr);
+      }
+    else negate_class = FALSE;
+
+    /* Keep a count of chars so that we can optimize the case of just a single
+    character. */
+
+    class_charcount = 0;
+    class_lastchar = -1;
+
+    /* Initialize the 32-char bit map to all zeros. We have to build the
+    map in a temporary bit of store, in case the class contains only 1
+    character, because in that case the compiled code doesn't use the
+    bit map. */
+
+    memset(class, 0, 32 * sizeof(uschar));
+
+    /* Process characters until ] is reached. By writing this as a "do" it
+    means that an initial ] is taken as a data character. */
+
+    do
+      {
+      if (c == 0)
+        {
+        *errorptr = ERR6;
+        goto FAILED;
+        }
+
+      /* Handle POSIX class names. Perl allows a negation extension of the
+      form [:^name]. A square bracket that doesn't match the syntax is
+      treated as a literal. We also recognize the POSIX constructions
+      [.ch.] and [=ch=] ("collating elements") and fault them, as Perl
+      5.6 does. */
+
+      if (c == '[' &&
+          (ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
+          check_posix_syntax(ptr, &tempptr, cd))
+        {
+        BOOL local_negate = FALSE;
+        int posix_class, i;
+        register const uschar *cbits = cd->cbits;
+
+        if (ptr[1] != ':')
+          {
+          *errorptr = ERR31;
+          goto FAILED;
+          }
+
+        ptr += 2;
+        if (*ptr == '^')
+          {
+          local_negate = TRUE;
+          ptr++;
+          }
+
+        posix_class = check_posix_name(ptr, tempptr - ptr);
+        if (posix_class < 0)
+          {
+          *errorptr = ERR30;
+          goto FAILED;
+          }
+
+        /* If matching is caseless, upper and lower are converted to
+        alpha. This relies on the fact that the class table starts with
+        alpha, lower, upper as the first 3 entries. */
+
+        if ((options & PCRE_CASELESS) != 0 && posix_class <= 2)
+          posix_class = 0;
+
+        /* Or into the map we are building up to 3 of the static class
+        tables, or their negations. */
+
+        posix_class *= 3;
+        for (i = 0; i < 3; i++)
+          {
+          int taboffset = posix_class_maps[posix_class + i];
+          if (taboffset < 0) break;
+          if (local_negate)
+            for (c = 0; c < 32; c++) class[c] |= ~cbits[c+taboffset];
+          else
+            for (c = 0; c < 32; c++) class[c] |= cbits[c+taboffset];
+          }
+
+        ptr = tempptr + 1;
+        class_charcount = 10;  /* Set > 1; assumes more than 1 per class */
+        continue;
+        }
+
+      /* Backslash may introduce a single character, or it may introduce one
+      of the specials, which just set a flag. Escaped items are checked for
+      validity in the pre-compiling pass. The sequence \b is a special case.
+      Inside a class (and only there) it is treated as backspace. Elsewhere
+      it marks a word boundary. Other escapes have preset maps ready to
+      or into the one we are building. We assume they have more than one
+      character in them, so set class_count bigger than one. */
+
+      if (c == '\\')
+        {
+        c = check_escape(&ptr, errorptr, *brackets, options, TRUE, cd);
+        if (-c == ESC_b) c = '\b';
+        else if (c < 0)
+          {
+          register const uschar *cbits = cd->cbits;
+          class_charcount = 10;
+          switch (-c)
+            {
+            case ESC_d:
+            for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_digit];
+            continue;
+
+            case ESC_D:
+            for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_digit];
+            continue;
+
+            case ESC_w:
+            for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_word];
+            continue;
+
+            case ESC_W:
+            for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_word];
+            continue;
+
+            case ESC_s:
+            for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_space];
+            continue;
+
+            case ESC_S:
+            for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_space];
+            continue;
+
+            default:
+            *errorptr = ERR7;
+            goto FAILED;
+            }
+          }
+        /* Fall through if single character */
+        }
+
+      /* A single character may be followed by '-' to form a range. However,
+      Perl does not permit ']' to be the end of the range. A '-' character
+      here is treated as a literal. */
+
+      if (ptr[1] == '-' && ptr[2] != ']')
+        {
+        int d;
+        ptr += 2;
+        d = *ptr;
+
+        if (d == 0)
+          {
+          *errorptr = ERR6;
+          goto FAILED;
+          }
+
+        /* The second part of a range can be a single-character escape, but
+        not any of the other escapes. */
+
+        if (d == '\\')
+          {
+          d = check_escape(&ptr, errorptr, *brackets, options, TRUE, cd);
+          if (d < 0)
+            {
+            if (d == -ESC_b) d = '\b'; else
+              {
+              *errorptr = ERR7;
+              goto FAILED;
+              }
+            }
+          }
+
+        if (d < c)
+          {
+          *errorptr = ERR8;
+          goto FAILED;
+          }
+
+        for (; c <= d; c++)
+          {
+          class[c/8] |= (1 << (c&7));
+          if ((options & PCRE_CASELESS) != 0)
+            {
+            int uc = cd->fcc[c];           /* flip case */
+            class[uc/8] |= (1 << (uc&7));
+            }
+          class_charcount++;                /* in case a one-char range */
+          class_lastchar = c;
+          }
+        continue;   /* Go get the next char in the class */
+        }
+
+      /* Handle a lone single character - we can get here for a normal
+      non-escape char, or after \ that introduces a single character. */
+
+      class [c/8] |= (1 << (c&7));
+      if ((options & PCRE_CASELESS) != 0)
+        {
+        c = cd->fcc[c];   /* flip case */
+        class[c/8] |= (1 << (c&7));
+        }
+      class_charcount++;
+      class_lastchar = c;
+      }
+
+    /* Loop until ']' reached; the check for end of string happens inside the
+    loop. This "while" is the end of the "do" above. */
+
+    while ((c = *(++ptr)) != ']');
+
+    /* If class_charcount is 1 and class_lastchar is not negative, we saw
+    precisely one character. This doesn't need the whole 32-byte bit map.
+    We turn it into a 1-character OP_CHAR if it's positive, or OP_NOT if
+    it's negative. */
+
+    if (class_charcount == 1 && class_lastchar >= 0)
+      {
+      if (negate_class)
+        {
+        code[-1] = OP_NOT;
+        }
+      else
+        {
+        code[-1] = OP_CHARS;
+        *code++ = 1;
+        }
+      *code++ = class_lastchar;
+      }
+
+    /* Otherwise, negate the 32-byte map if necessary, and copy it into
+    the code vector. */
+
+    else
+      {
+      if (negate_class)
+        for (c = 0; c < 32; c++) code[c] = ~class[c];
+      else
+        memcpy(code, class, 32);
+      code += 32;
+      }
+    break;
+
+    /* Various kinds of repeat */
+
+    case '{':
+    if (!is_counted_repeat(ptr+1, cd)) goto NORMAL_CHAR;
+    ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorptr, cd);
+    if (*errorptr != NULL) goto FAILED;
+    goto REPEAT;
+
+    case '*':
+    repeat_min = 0;
+    repeat_max = -1;
+    goto REPEAT;
+
+    case '+':
+    repeat_min = 1;
+    repeat_max = -1;
+    goto REPEAT;
+
+    case '?':
+    repeat_min = 0;
+    repeat_max = 1;
+
+    REPEAT:
+    if (previous == NULL)
+      {
+      *errorptr = ERR9;
+      goto FAILED;
+      }
+
+    /* If the next character is '?' this is a minimizing repeat, by default,
+    but if PCRE_UNGREEDY is set, it works the other way round. Advance to the
+    next character. */
+
+    if (ptr[1] == '?')
+      { repeat_type = greedy_non_default; ptr++; }
+    else repeat_type = greedy_default;
+
+    /* If previous was a string of characters, chop off the last one and use it
+    as the subject of the repeat. If there was only one character, we can
+    abolish the previous item altogether. A repeat with a zero minimum wipes
+    out any reqchar setting, backing up to the previous value. We must also
+    adjust the countlits value. */
+
+    if (*previous == OP_CHARS)
+      {
+      int len = previous[1];
+
+      if (repeat_min == 0) *reqchar = prevreqchar;
+      *countlits += repeat_min - 1;
+
+      if (len == 1)
+        {
+        c = previous[2];
+        code = previous;
+        }
+      else
+        {
+        c = previous[len+1];
+        previous[1]--;
+        code--;
+        }
+      op_type = 0;                 /* Use single-char op codes */
+      goto OUTPUT_SINGLE_REPEAT;   /* Code shared with single character types */
+      }
+
+    /* If previous was a single negated character ([^a] or similar), we use
+    one of the special opcodes, replacing it. The code is shared with single-
+    character repeats by adding a suitable offset into repeat_type. */
+
+    else if ((int)*previous == OP_NOT)
+      {
+      op_type = OP_NOTSTAR - OP_STAR;  /* Use "not" opcodes */
+      c = previous[1];
+      code = previous;
+      goto OUTPUT_SINGLE_REPEAT;
+      }
+
+    /* If previous was a character type match (\d or similar), abolish it and
+    create a suitable repeat item. The code is shared with single-character
+    repeats by adding a suitable offset into repeat_type. */
+
+    else if ((int)*previous < OP_EODN || *previous == OP_ANY)
+      {
+      op_type = OP_TYPESTAR - OP_STAR;  /* Use type opcodes */
+      c = *previous;
+      code = previous;
+
+      OUTPUT_SINGLE_REPEAT:
+
+      /* If the maximum is zero then the minimum must also be zero; Perl allows
+      this case, so we do too - by simply omitting the item altogether. */
+
+      if (repeat_max == 0) goto END_REPEAT;
+
+      /* Combine the op_type with the repeat_type */
+
+      repeat_type += op_type;
+
+      /* A minimum of zero is handled either as the special case * or ?, or as
+      an UPTO, with the maximum given. */
+
+      if (repeat_min == 0)
+        {
+        if (repeat_max == -1) *code++ = OP_STAR + repeat_type;
+          else if (repeat_max == 1) *code++ = OP_QUERY + repeat_type;
+        else
+          {
+          *code++ = OP_UPTO + repeat_type;
+          *code++ = repeat_max >> 8;
+          *code++ = (repeat_max & 255);
+          }
+        }
+
+      /* The case {1,} is handled as the special case + */
+
+      else if (repeat_min == 1 && repeat_max == -1)
+        *code++ = OP_PLUS + repeat_type;
+
+      /* The case {n,n} is just an EXACT, while the general case {n,m} is
+      handled as an EXACT followed by an UPTO. An EXACT of 1 is optimized. */
+
+      else
+        {
+        if (repeat_min != 1)
+          {
+          *code++ = OP_EXACT + op_type;  /* NB EXACT doesn't have repeat_type */
+          *code++ = repeat_min >> 8;
+          *code++ = (repeat_min & 255);
+          }
+
+        /* If the mininum is 1 and the previous item was a character string,
+        we either have to put back the item that got cancelled if the string
+        length was 1, or add the character back onto the end of a longer
+        string. For a character type nothing need be done; it will just get
+        put back naturally. Note that the final character is always going to
+        get added below. */
+
+        else if (*previous == OP_CHARS)
+          {
+          if (code == previous) code += 2; else previous[1]++;
+          }
+
+        /*  For a single negated character we also have to put back the
+        item that got cancelled. */
+
+        else if (*previous == OP_NOT) code++;
+
+        /* If the maximum is unlimited, insert an OP_STAR. */
+
+        if (repeat_max < 0)
+          {
+          *code++ = c;
+          *code++ = OP_STAR + repeat_type;
+          }
+
+        /* Else insert an UPTO if the max is greater than the min. */
+
+        else if (repeat_max != repeat_min)
+          {
+          *code++ = c;
+          repeat_max -= repeat_min;
+          *code++ = OP_UPTO + repeat_type;
+          *code++ = repeat_max >> 8;
+          *code++ = (repeat_max & 255);
+          }
+        }
+
+      /* The character or character type itself comes last in all cases. */
+
+      *code++ = c;
+      }
+
+    /* If previous was a character class or a back reference, we put the repeat
+    stuff after it, but just skip the item if the repeat was {0,0}. */
+
+    else if (*previous == OP_CLASS || *previous == OP_REF)
+      {
+      if (repeat_max == 0)
+        {
+        code = previous;
+        goto END_REPEAT;
+        }
+      if (repeat_min == 0 && repeat_max == -1)
+        *code++ = OP_CRSTAR + repeat_type;
+      else if (repeat_min == 1 && repeat_max == -1)
+        *code++ = OP_CRPLUS + repeat_type;
+      else if (repeat_min == 0 && repeat_max == 1)
+        *code++ = OP_CRQUERY + repeat_type;
+      else
+        {
+        *code++ = OP_CRRANGE + repeat_type;
+        *code++ = repeat_min >> 8;
+        *code++ = repeat_min & 255;
+        if (repeat_max == -1) repeat_max = 0;  /* 2-byte encoding for max */
+        *code++ = repeat_max >> 8;
+        *code++ = repeat_max & 255;
+        }
+      }
+
+    /* If previous was a bracket group, we may have to replicate it in certain
+    cases. */
+
+    else if ((int)*previous >= OP_BRA || (int)*previous == OP_ONCE ||
+             (int)*previous == OP_COND)
+      {
+      register int i;
+      int ketoffset = 0;
+      int len = code - previous;
+      uschar *bralink = NULL;
+
+      /* If the maximum repeat count is unlimited, find the end of the bracket
+      by scanning through from the start, and compute the offset back to it
+      from the current code pointer. There may be an OP_OPT setting following
+      the final KET, so we can't find the end just by going back from the code
+      pointer. */
+
+      if (repeat_max == -1)
+        {
+        register uschar *ket = previous;
+        do ket += (ket[1] << 8) + ket[2]; while (*ket != OP_KET);
+        ketoffset = code - ket;
+        }
+
+      /* The case of a zero minimum is special because of the need to stick
+      OP_BRAZERO in front of it, and because the group appears once in the
+      data, whereas in other cases it appears the minimum number of times. For
+      this reason, it is simplest to treat this case separately, as otherwise
+      the code gets far too mess. There are several special subcases when the
+      minimum is zero. */
+
+      if (repeat_min == 0)
+        {
+        /* If we set up a required char from the bracket, we must back off
+        to the previous value and reset the countlits value too. */
+
+        if (subcountlits > 0)
+          {
+          *reqchar = prevreqchar;
+          *countlits -= subcountlits;
+          }
+
+        /* If the maximum is also zero, we just omit the group from the output
+        altogether. */
+
+        if (repeat_max == 0)
+          {
+          code = previous;
+          goto END_REPEAT;
+          }
+
+        /* If the maximum is 1 or unlimited, we just have to stick in the
+        BRAZERO and do no more at this point. */
+
+        if (repeat_max <= 1)
+          {
+          memmove(previous+1, previous, len);
+          code++;
+          *previous++ = OP_BRAZERO + repeat_type;
+          }
+
+        /* If the maximum is greater than 1 and limited, we have to replicate
+        in a nested fashion, sticking OP_BRAZERO before each set of brackets.
+        The first one has to be handled carefully because it's the original
+        copy, which has to be moved up. The remainder can be handled by code
+        that is common with the non-zero minimum case below. We just have to
+        adjust the value or repeat_max, since one less copy is required. */
+
+        else
+          {
+          int offset;
+          memmove(previous+4, previous, len);
+          code += 4;
+          *previous++ = OP_BRAZERO + repeat_type;
+          *previous++ = OP_BRA;
+
+          /* We chain together the bracket offset fields that have to be
+          filled in later when the ends of the brackets are reached. */
+
+          offset = (bralink == NULL)? 0 : previous - bralink;
+          bralink = previous;
+          *previous++ = offset >> 8;
+          *previous++ = offset & 255;
+          }
+
+        repeat_max--;
+        }
+
+      /* If the minimum is greater than zero, replicate the group as many
+      times as necessary, and adjust the maximum to the number of subsequent
+      copies that we need. */
+
+      else
+        {
+        for (i = 1; i < repeat_min; i++)
+          {
+          memcpy(code, previous, len);
+          code += len;
+          }
+        if (repeat_max > 0) repeat_max -= repeat_min;
+        }
+
+      /* This code is common to both the zero and non-zero minimum cases. If
+      the maximum is limited, it replicates the group in a nested fashion,
+      remembering the bracket starts on a stack. In the case of a zero minimum,
+      the first one was set up above. In all cases the repeat_max now specifies
+      the number of additional copies needed. */
+
+      if (repeat_max >= 0)
+        {
+        for (i = repeat_max - 1; i >= 0; i--)
+          {
+          *code++ = OP_BRAZERO + repeat_type;
+
+          /* All but the final copy start a new nesting, maintaining the
+          chain of brackets outstanding. */
+
+          if (i != 0)
+            {
+            int offset;
+            *code++ = OP_BRA;
+            offset = (bralink == NULL)? 0 : code - bralink;
+            bralink = code;
+            *code++ = offset >> 8;
+            *code++ = offset & 255;
+            }
+
+          memcpy(code, previous, len);
+          code += len;
+          }
+
+        /* Now chain through the pending brackets, and fill in their length
+        fields (which are holding the chain links pro tem). */
+
+        while (bralink != NULL)
+          {
+          int oldlinkoffset;
+          int offset = code - bralink + 1;
+          uschar *bra = code - offset;
+          oldlinkoffset = (bra[1] << 8) + bra[2];
+          bralink = (oldlinkoffset == 0)? NULL : bralink - oldlinkoffset;
+          *code++ = OP_KET;
+          *code++ = bra[1] = offset >> 8;
+          *code++ = bra[2] = (offset & 255);
+          }
+        }
+
+      /* If the maximum is unlimited, set a repeater in the final copy. We
+      can't just offset backwards from the current code point, because we
+      don't know if there's been an options resetting after the ket. The
+      correct offset was computed above. */
+
+      else code[-ketoffset] = OP_KETRMAX + repeat_type;
+      }
+
+    /* Else there's some kind of shambles */
+
+    else
+      {
+      *errorptr = ERR11;
+      goto FAILED;
+      }
+
+    /* In all case we no longer have a previous item. */
+
+    END_REPEAT:
+    previous = NULL;
+    break;
+
+
+    /* Start of nested bracket sub-expression, or comment or lookahead or
+    lookbehind or option setting or condition. First deal with special things
+    that can come after a bracket; all are introduced by ?, and the appearance
+    of any of them means that this is not a referencing group. They were
+    checked for validity in the first pass over the string, so we don't have to
+    check for syntax errors here.  */
+
+    case '(':
+    newoptions = options;
+    condref = -1;
+
+    if (*(++ptr) == '?')
+      {
+      int set, unset;
+      int *optset;
+
+      switch (*(++ptr))
+        {
+        case '#':                 /* Comment; skip to ket */
+        ptr++;
+        while (*ptr != ')') ptr++;
+        continue;
+
+        case ':':                 /* Non-extracting bracket */
+        bravalue = OP_BRA;
+        ptr++;
+        break;
+
+        case '(':
+        bravalue = OP_COND;       /* Conditional group */
+        if ((cd->ctypes[*(++ptr)] & ctype_digit) != 0)
+          {
+          condref = *ptr - '0';
+          while (*(++ptr) != ')') condref = condref*10 + *ptr - '0';
+          ptr++;
+          }
+        else ptr--;
+        break;
+
+        case '=':                 /* Positive lookahead */
+        bravalue = OP_ASSERT;
+        ptr++;
+        break;
+
+        case '!':                 /* Negative lookahead */
+        bravalue = OP_ASSERT_NOT;
+        ptr++;
+        break;
+
+        case '<':                 /* Lookbehinds */
+        switch (*(++ptr))
+          {
+          case '=':               /* Positive lookbehind */
+          bravalue = OP_ASSERTBACK;
+          ptr++;
+          break;
+
+          case '!':               /* Negative lookbehind */
+          bravalue = OP_ASSERTBACK_NOT;
+          ptr++;
+          break;
+
+          default:                /* Syntax error */
+          *errorptr = ERR24;
+          goto FAILED;
+          }
+        break;
+
+        case '>':                 /* One-time brackets */
+        bravalue = OP_ONCE;
+        ptr++;
+        break;
+
+        case 'R':                 /* Pattern recursion */
+        *code++ = OP_RECURSE;
+        ptr++;
+        continue;
+
+        default:                  /* Option setting */
+        set = unset = 0;
+        optset = &set;
+
+        while (*ptr != ')' && *ptr != ':')
+          {
+          switch (*ptr++)
+            {
+            case '-': optset = &unset; break;
+
+            case 'i': *optset |= PCRE_CASELESS; break;
+            case 'm': *optset |= PCRE_MULTILINE; break;
+            case 's': *optset |= PCRE_DOTALL; break;
+            case 'x': *optset |= PCRE_EXTENDED; break;
+            case 'U': *optset |= PCRE_UNGREEDY; break;
+            case 'X': *optset |= PCRE_EXTRA; break;
+
+            default:
+            *errorptr = ERR12;
+            goto FAILED;
+            }
+          }
+
+        /* Set up the changed option bits, but don't change anything yet. */
+
+        newoptions = (options | set) & (~unset);
+
+        /* If the options ended with ')' this is not the start of a nested
+        group with option changes, so the options change at this level. At top
+        level there is nothing else to be done (the options will in fact have
+        been set from the start of compiling as a result of the first pass) but
+        at an inner level we must compile code to change the ims options if
+        necessary, and pass the new setting back so that it can be put at the
+        start of any following branches, and when this group ends, a resetting
+        item can be compiled. */
+
+        if (*ptr == ')')
+          {
+          if ((options & PCRE_INGROUP) != 0 &&
+              (options & PCRE_IMS) != (newoptions & PCRE_IMS))
+            {
+            *code++ = OP_OPT;
+            *code++ = *optchanged = newoptions & PCRE_IMS;
+            }
+          options = newoptions;  /* Change options at this level */
+          previous = NULL;       /* This item can't be repeated */
+          continue;              /* It is complete */
+          }
+
+        /* If the options ended with ':' we are heading into a nested group
+        with possible change of options. Such groups are non-capturing and are
+        not assertions of any kind. All we need to do is skip over the ':';
+        the newoptions value is handled below. */
+
+        bravalue = OP_BRA;
+        ptr++;
+        }
+      }
+
+    /* Else we have a referencing group; adjust the opcode. */
+
+    else
+      {
+      if (++(*brackets) > EXTRACT_MAX)
+        {
+        *errorptr = ERR13;
+        goto FAILED;
+        }
+      bravalue = OP_BRA + *brackets;
+      }
+
+    /* Process nested bracketed re. Assertions may not be repeated, but other
+    kinds can be. We copy code into a non-register variable in order to be able
+    to pass its address because some compilers complain otherwise. Pass in a
+    new setting for the ims options if they have changed. */
+
+    previous = (bravalue >= OP_ONCE)? code : NULL;
+    *code = bravalue;
+    tempcode = code;
+
+    if (!compile_regex(
+         options | PCRE_INGROUP,       /* Set for all nested groups */
+         ((options & PCRE_IMS) != (newoptions & PCRE_IMS))?
+           newoptions & PCRE_IMS : -1, /* Pass ims options if changed */
+         brackets,                     /* Bracket level */
+         &tempcode,                    /* Where to put code (updated) */
+         &ptr,                         /* Input pointer (updated) */
+         errorptr,                     /* Where to put an error message */
+         (bravalue == OP_ASSERTBACK ||
+          bravalue == OP_ASSERTBACK_NOT), /* TRUE if back assert */
+         condref,                      /* Condition reference number */
+         &subreqchar,                  /* For possible last char */
+         &subcountlits,                /* For literal count */
+         cd))                          /* Tables block */
+      goto FAILED;
+
+    /* At the end of compiling, code is still pointing to the start of the
+    group, while tempcode has been updated to point past the end of the group
+    and any option resetting that may follow it. The pattern pointer (ptr)
+    is on the bracket. */
+
+    /* If this is a conditional bracket, check that there are no more than
+    two branches in the group. */
+
+    if (bravalue == OP_COND)
+      {
+      uschar *tc = code;
+      condcount = 0;
+
+      do {
+         condcount++;
+         tc += (tc[1] << 8) | tc[2];
+         }
+      while (*tc != OP_KET);
+
+      if (condcount > 2)
+        {
+        *errorptr = ERR27;
+        goto FAILED;
+        }
+      }
+
+    /* Handle updating of the required character. If the subpattern didn't
+    set one, leave it as it was. Otherwise, update it for normal brackets of
+    all kinds, forward assertions, and conditions with two branches. Don't
+    update the literal count for forward assertions, however. If the bracket
+    is followed by a quantifier with zero repeat, we have to back off. Hence
+    the definition of prevreqchar and subcountlits outside the main loop so
+    that they can be accessed for the back off. */
+
+    if (subreqchar > 0 &&
+         (bravalue >= OP_BRA || bravalue == OP_ONCE || bravalue == OP_ASSERT ||
+         (bravalue == OP_COND && condcount == 2)))
+      {
+      prevreqchar = *reqchar;
+      *reqchar = subreqchar;
+      if (bravalue != OP_ASSERT) *countlits += subcountlits;
+      }
+
+    /* Now update the main code pointer to the end of the group. */
+
+    code = tempcode;
+
+    /* Error if hit end of pattern */
+
+    if (*ptr != ')')
+      {
+      *errorptr = ERR14;
+      goto FAILED;
+      }
+    break;
+
+    /* Check \ for being a real metacharacter; if not, fall through and handle
+    it as a data character at the start of a string. Escape items are checked
+    for validity in the pre-compiling pass. */
+
+    case '\\':
+    tempptr = ptr;
+    c = check_escape(&ptr, errorptr, *brackets, options, FALSE, cd);
+
+    /* Handle metacharacters introduced by \. For ones like \d, the ESC_ values
+    are arranged to be the negation of the corresponding OP_values. For the
+    back references, the values are ESC_REF plus the reference number. Only
+    back references and those types that consume a character may be repeated.
+    We can test for values between ESC_b and ESC_Z for the latter; this may
+    have to change if any new ones are ever created. */
+
+    if (c < 0)
+      {
+      if (-c >= ESC_REF)
+        {
+        previous = code;
+        *code++ = OP_REF;
+        *code++ = -c - ESC_REF;
+        }
+      else
+        {
+        previous = (-c > ESC_b && -c < ESC_Z)? code : NULL;
+        *code++ = -c;
+        }
+      continue;
+      }
+
+    /* Data character: reset and fall through */
+
+    ptr = tempptr;
+    c = '\\';
+
+    /* Handle a run of data characters until a metacharacter is encountered.
+    The first character is guaranteed not to be whitespace or # when the
+    extended flag is set. */
+
+    NORMAL_CHAR:
+    default:
+    previous = code;
+    *code = OP_CHARS;
+    code += 2;
+    length = 0;
+
+    do
+      {
+      if ((options & PCRE_EXTENDED) != 0)
+        {
+        if ((cd->ctypes[c] & ctype_space) != 0) continue;
+        if (c == '#')
+          {
+          while ((c = *(++ptr)) != 0 && c != '\n');
+          if (c == 0) break;
+          continue;
+          }
+        }
+
+      /* Backslash may introduce a data char or a metacharacter. Escaped items
+      are checked for validity in the pre-compiling pass. Stop the string
+      before a metaitem. */
+
+      if (c == '\\')
+        {
+        tempptr = ptr;
+        c = check_escape(&ptr, errorptr, *brackets, options, FALSE, cd);
+        if (c < 0) { ptr = tempptr; break; }
+        }
+
+      /* Ordinary character or single-char escape */
+
+      *code++ = c;
+      length++;
+      }
+
+    /* This "while" is the end of the "do" above. */
+
+    while (length < 255 && (cd->ctypes[c = *(++ptr)] & ctype_meta) == 0);
+
+    /* Update the last character and the count of literals */
+
+    prevreqchar = (length > 1)? code[-2] : *reqchar;
+    *reqchar = code[-1];
+    *countlits += length;
+
+    /* Compute the length and set it in the data vector, and advance to
+    the next state. */
+
+    previous[1] = length;
+    if (length < 255) ptr--;
+    break;
+    }
+  }                   /* end of big loop */
+
+/* Control never reaches here by falling through, only by a goto for all the
+error states. Pass back the position in the pattern so that it can be displayed
+to the user for diagnosing the error. */
+
+FAILED:
+*ptrptr = ptr;
+return FALSE;
+}
+
+
+
+
+/*************************************************
+*     Compile sequence of alternatives           *
+*************************************************/
+
+/* On entry, ptr is pointing past the bracket character, but on return
+it points to the closing bracket, or vertical bar, or end of string.
+The code variable is pointing at the byte into which the BRA operator has been
+stored. If the ims options are changed at the start (for a (?ims: group) or
+during any branch, we need to insert an OP_OPT item at the start of every
+following branch to ensure they get set correctly at run time, and also pass
+the new options into every subsequent branch compile.
+
+Argument:
+  options     the option bits
+  optchanged  new ims options to set as if (?ims) were at the start, or -1
+               for no change
+  brackets    -> int containing the number of extracting brackets used
+  codeptr     -> the address of the current code pointer
+  ptrptr      -> the address of the current pattern pointer
+  errorptr    -> pointer to error message
+  lookbehind  TRUE if this is a lookbehind assertion
+  condref     > 0 for OPT_CREF setting at start of conditional group
+  reqchar     -> place to put the last required character, or a negative number
+  countlits   -> place to put the shortest literal count of any branch
+  cd          points to the data block with tables pointers
+
+Returns:      TRUE on success
+*/
+
+static BOOL
+compile_regex(int options, int optchanged, int *brackets, uschar **codeptr,
+  const uschar **ptrptr, const char **errorptr, BOOL lookbehind, int condref,
+  int *reqchar, int *countlits, compile_data *cd)
+{
+const uschar *ptr = *ptrptr;
+uschar *code = *codeptr;
+uschar *last_branch = code;
+uschar *start_bracket = code;
+uschar *reverse_count = NULL;
+int oldoptions = options & PCRE_IMS;
+int branchreqchar, branchcountlits;
+
+*reqchar = -1;
+*countlits = INT_MAX;
+code += 3;
+
+/* At the start of a reference-based conditional group, insert the reference
+number as an OP_CREF item. */
+
+if (condref > 0)
+  {
+  *code++ = OP_CREF;
+  *code++ = condref;
+  }
+
+/* Loop for each alternative branch */
+
+for (;;)
+  {
+  int length;
+
+  /* Handle change of options */
+
+  if (optchanged >= 0)
+    {
+    *code++ = OP_OPT;
+    *code++ = optchanged;
+    options = (options & ~PCRE_IMS) | optchanged;
+    }
+
+  /* Set up dummy OP_REVERSE if lookbehind assertion */
+
+  if (lookbehind)
+    {
+    *code++ = OP_REVERSE;
+    reverse_count = code;
+    *code++ = 0;
+    *code++ = 0;
+    }
+
+  /* Now compile the branch */
+
+  if (!compile_branch(options, brackets, &code, &ptr, errorptr, &optchanged,
+      &branchreqchar, &branchcountlits, cd))
+    {
+    *ptrptr = ptr;
+    return FALSE;
+    }
+
+  /* Fill in the length of the last branch */
+
+  length = code - last_branch;
+  last_branch[1] = length >> 8;
+  last_branch[2] = length & 255;
+
+  /* Save the last required character if all branches have the same; a current
+  value of -1 means unset, while -2 means "previous branch had no last required
+  char".  */
+
+  if (*reqchar != -2)
+    {
+    if (branchreqchar >= 0)
+      {
+      if (*reqchar == -1) *reqchar = branchreqchar;
+      else if (*reqchar != branchreqchar) *reqchar = -2;
+      }
+    else *reqchar = -2;
+    }
+
+  /* Keep the shortest literal count */
+
+  if (branchcountlits < *countlits) *countlits = branchcountlits;
+  DPRINTF(("literal count = %d min=%d\n", branchcountlits, *countlits));
+
+  /* If lookbehind, check that this branch matches a fixed-length string,
+  and put the length into the OP_REVERSE item. Temporarily mark the end of
+  the branch with OP_END. */
+
+  if (lookbehind)
+    {
+    *code = OP_END;
+    length = find_fixedlength(last_branch);
+    DPRINTF(("fixed length = %d\n", length));
+    if (length < 0)
+      {
+      *errorptr = ERR25;
+      *ptrptr = ptr;
+      return FALSE;
+      }
+    reverse_count[0] = (length >> 8);
+    reverse_count[1] = length & 255;
+    }
+
+  /* Reached end of expression, either ')' or end of pattern. Insert a
+  terminating ket and the length of the whole bracketed item, and return,
+  leaving the pointer at the terminating char. If any of the ims options
+  were changed inside the group, compile a resetting op-code following. */
+
+  if (*ptr != '|')
+    {
+    length = code - start_bracket;
+    *code++ = OP_KET;
+    *code++ = length >> 8;
+    *code++ = length & 255;
+    if (optchanged >= 0)
+      {
+      *code++ = OP_OPT;
+      *code++ = oldoptions;
+      }
+    *codeptr = code;
+    *ptrptr = ptr;
+    return TRUE;
+    }
+
+  /* Another branch follows; insert an "or" node and advance the pointer. */
+
+  *code = OP_ALT;
+  last_branch = code;
+  code += 3;
+  ptr++;
+  }
+/* Control never reaches here */
+}
+
+
+
+
+/*************************************************
+*      Find first significant op code            *
+*************************************************/
+
+/* This is called by several functions that scan a compiled expression looking
+for a fixed first character, or an anchoring op code etc. It skips over things
+that do not influence this. For one application, a change of caseless option is
+important.
+
+Arguments:
+  code       pointer to the start of the group
+  options    pointer to external options
+  optbit     the option bit whose changing is significant, or
+             zero if none are
+  optstop    TRUE to return on option change, otherwise change the options
+               value and continue
+
+Returns:     pointer to the first significant opcode
+*/
+
+static const uschar*
+first_significant_code(const uschar *code, int *options, int optbit,
+  BOOL optstop)
+{
+for (;;)
+  {
+  switch ((int)*code)
+    {
+    case OP_OPT:
+    if (optbit > 0 && ((int)code[1] & optbit) != (*options & optbit))
+      {
+      if (optstop) return code;
+      *options = (int)code[1];
+      }
+    code += 2;
+    break;
+
+    case OP_CREF:
+    code += 2;
+    break;
+
+    case OP_WORD_BOUNDARY:
+    case OP_NOT_WORD_BOUNDARY:
+    code++;
+    break;
+
+    case OP_ASSERT_NOT:
+    case OP_ASSERTBACK:
+    case OP_ASSERTBACK_NOT:
+    do code += (code[1] << 8) + code[2]; while (*code == OP_ALT);
+    code += 3;
+    break;
+
+    default:
+    return code;
+    }
+  }
+/* Control never reaches here */
+}
+
+
+
+
+/*************************************************
+*          Check for anchored expression         *
+*************************************************/
+
+/* Try to find out if this is an anchored regular expression. Consider each
+alternative branch. If they all start with OP_SOD or OP_CIRC, or with a bracket
+all of whose alternatives start with OP_SOD or OP_CIRC (recurse ad lib), then
+it's anchored. However, if this is a multiline pattern, then only OP_SOD
+counts, since OP_CIRC can match in the middle.
+
+A branch is also implicitly anchored if it starts with .* and DOTALL is set,
+because that will try the rest of the pattern at all possible matching points,
+so there is no point trying them again.
+
+Arguments:
+  code       points to start of expression (the bracket)
+  options    points to the options setting
+
+Returns:     TRUE or FALSE
+*/
+
+static BOOL
+is_anchored(register const uschar *code, int *options)
+{
+do {
+   const uschar *scode = first_significant_code(code + 3, options,
+     PCRE_MULTILINE, FALSE);
+   register int op = *scode;
+   if (op >= OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND)
+     { if (!is_anchored(scode, options)) return FALSE; }
+   else if ((op == OP_TYPESTAR || op == OP_TYPEMINSTAR) &&
+            (*options & PCRE_DOTALL) != 0)
+     { if (scode[1] != OP_ANY) return FALSE; }
+   else if (op != OP_SOD &&
+           ((*options & PCRE_MULTILINE) != 0 || op != OP_CIRC))
+     return FALSE;
+   code += (code[1] << 8) + code[2];
+   }
+while (*code == OP_ALT);
+return TRUE;
+}
+
+
+
+/*************************************************
+*         Check for starting with ^ or .*        *
+*************************************************/
+
+/* This is called to find out if every branch starts with ^ or .* so that
+"first char" processing can be done to speed things up in multiline
+matching and for non-DOTALL patterns that start with .* (which must start at
+the beginning or after \n).
+
+Argument:  points to start of expression (the bracket)
+Returns:   TRUE or FALSE
+*/
+
+static BOOL
+is_startline(const uschar *code)
+{
+do {
+   const uschar *scode = first_significant_code(code + 3, NULL, 0, FALSE);
+   register int op = *scode;
+   if (op >= OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND)
+     { if (!is_startline(scode)) return FALSE; }
+   else if (op == OP_TYPESTAR || op == OP_TYPEMINSTAR)
+     { if (scode[1] != OP_ANY) return FALSE; }
+   else if (op != OP_CIRC) return FALSE;
+   code += (code[1] << 8) + code[2];
+   }
+while (*code == OP_ALT);
+return TRUE;
+}
+
+
+
+/*************************************************
+*          Check for fixed first char            *
+*************************************************/
+
+/* Try to find out if there is a fixed first character. This is called for
+unanchored expressions, as it speeds up their processing quite considerably.
+Consider each alternative branch. If they all start with the same char, or with
+a bracket all of whose alternatives start with the same char (recurse ad lib),
+then we return that char, otherwise -1.
+
+Arguments:
+  code       points to start of expression (the bracket)
+  options    pointer to the options (used to check casing changes)
+
+Returns:     -1 or the fixed first char
+*/
+
+static int
+find_firstchar(const uschar *code, int *options)
+{
+register int c = -1;
+do {
+   int d;
+   const uschar *scode = first_significant_code(code + 3, options,
+     PCRE_CASELESS, TRUE);
+   register int op = *scode;
+
+   if (op >= OP_BRA) op = OP_BRA;
+
+   switch(op)
+     {
+     default:
+     return -1;
+
+     case OP_BRA:
+     case OP_ASSERT:
+     case OP_ONCE:
+     case OP_COND:
+     if ((d = find_firstchar(scode, options)) < 0) return -1;
+     if (c < 0) c = d; else if (c != d) return -1;
+     break;
+
+     case OP_EXACT:       /* Fall through */
+     scode++;
+
+     case OP_CHARS:       /* Fall through */
+     scode++;
+
+     case OP_PLUS:
+     case OP_MINPLUS:
+     if (c < 0) c = scode[1]; else if (c != scode[1]) return -1;
+     break;
+     }
+
+   code += (code[1] << 8) + code[2];
+   }
+while (*code == OP_ALT);
+return c;
+}
+
+
+
+
+
+/*************************************************
+*        Compile a Regular Expression            *
+*************************************************/
+
+/* This function takes a string and returns a pointer to a block of store
+holding a compiled version of the expression.
+
+Arguments:
+  pattern      the regular expression
+  options      various option bits
+  errorptr     pointer to pointer to error text
+  erroroffset  ptr offset in pattern where error was detected
+  tables       pointer to character tables or NULL
+
+Returns:       pointer to compiled data block, or NULL on error,
+               with errorptr and erroroffset set
+*/
+
+pcre *
+pcre_compile(const char *pattern, int options, const char **errorptr,
+  int *erroroffset, const unsigned char *tables)
+{
+real_pcre *re;
+int length = 3;      /* For initial BRA plus length */
+int runlength;
+int c, reqchar, countlits;
+int bracount = 0;
+int top_backref = 0;
+int branch_extra = 0;
+int branch_newextra;
+unsigned int brastackptr = 0;
+size_t size;
+uschar *code;
+const uschar *ptr;
+compile_data compile_block;
+int brastack[BRASTACK_SIZE];
+uschar bralenstack[BRASTACK_SIZE];
+
+#ifdef DEBUG
+uschar *code_base, *code_end;
+#endif
+
+/* We can't pass back an error message if errorptr is NULL; I guess the best we
+can do is just return NULL. */
+
+if (errorptr == NULL) return NULL;
+*errorptr = NULL;
+
+/* However, we can give a message for this error */
+
+if (erroroffset == NULL)
+  {
+  *errorptr = ERR16;
+  return NULL;
+  }
+*erroroffset = 0;
+
+if ((options & ~PUBLIC_OPTIONS) != 0)
+  {
+  *errorptr = ERR17;
+  return NULL;
+  }
+
+/* Set up pointers to the individual character tables */
+
+if (tables == NULL) tables = pcre_default_tables;
+compile_block.lcc = tables + lcc_offset;
+compile_block.fcc = tables + fcc_offset;
+compile_block.cbits = tables + cbits_offset;
+compile_block.ctypes = tables + ctypes_offset;
+
+/* Reflect pattern for debugging output */
+
+DPRINTF(("------------------------------------------------------------------\n"));
+DPRINTF(("%s\n", pattern));
+
+/* The first thing to do is to make a pass over the pattern to compute the
+amount of store required to hold the compiled code. This does not have to be
+perfect as long as errors are overestimates. At the same time we can detect any
+internal flag settings. Make an attempt to correct for any counted white space
+if an "extended" flag setting appears late in the pattern. We can't be so
+clever for #-comments. */
+
+ptr = (const uschar *)(pattern - 1);
+while ((c = *(++ptr)) != 0)
+  {
+  int min, max;
+  int class_charcount;
+
+  if ((options & PCRE_EXTENDED) != 0)
+    {
+    if ((compile_block.ctypes[c] & ctype_space) != 0) continue;
+    if (c == '#')
+      {
+      while ((c = *(++ptr)) != 0 && c != '\n');
+      continue;
+      }
+    }
+
+  switch(c)
+    {
+    /* A backslashed item may be an escaped "normal" character or a
+    character type. For a "normal" character, put the pointers and
+    character back so that tests for whitespace etc. in the input
+    are done correctly. */
+
+    case '\\':
+      {
+      const uschar *save_ptr = ptr;
+      c = check_escape(&ptr, errorptr, bracount, options, FALSE, &compile_block);
+      if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
+      if (c >= 0)
+        {
+        ptr = save_ptr;
+        c = '\\';
+        goto NORMAL_CHAR;
+        }
+      }
+    length++;
+
+    /* A back reference needs an additional char, plus either one or 5
+    bytes for a repeat. We also need to keep the value of the highest
+    back reference. */
+
+    if (c <= -ESC_REF)
+      {
+      int refnum = -c - ESC_REF;
+      if (refnum > top_backref) top_backref = refnum;
+      length++;   /* For single back reference */
+      if (ptr[1] == '{' && is_counted_repeat(ptr+2, &compile_block))
+        {
+        ptr = read_repeat_counts(ptr+2, &min, &max, errorptr, &compile_block);
+        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
+        if ((min == 0 && (max == 1 || max == -1)) ||
+          (min == 1 && max == -1))
+            length++;
+        else length += 5;
+        if (ptr[1] == '?') ptr++;
+        }
+      }
+    continue;
+
+    case '^':
+    case '.':
+    case '$':
+    case '*':     /* These repeats won't be after brackets; */
+    case '+':     /* those are handled separately */
+    case '?':
+    length++;
+    continue;
+
+    /* This covers the cases of repeats after a single char, metachar, class,
+    or back reference. */
+
+    case '{':
+    if (!is_counted_repeat(ptr+1, &compile_block)) goto NORMAL_CHAR;
+    ptr = read_repeat_counts(ptr+1, &min, &max, errorptr, &compile_block);
+    if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
+    if ((min == 0 && (max == 1 || max == -1)) ||
+      (min == 1 && max == -1))
+        length++;
+    else
+      {
+      length--;   /* Uncount the original char or metachar */
+      if (min == 1) length++; else if (min > 0) length += 4;
+      if (max > 0) length += 4; else length += 2;
+      }
+    if (ptr[1] == '?') ptr++;
+    continue;
+
+    /* An alternation contains an offset to the next branch or ket. If any ims
+    options changed in the previous branch(es), and/or if we are in a
+    lookbehind assertion, extra space will be needed at the start of the
+    branch. This is handled by branch_extra. */
+
+    case '|':
+    length += 3 + branch_extra;
+    continue;
+
+    /* A character class uses 33 characters. Don't worry about character types
+    that aren't allowed in classes - they'll get picked up during the compile.
+    A character class that contains only one character uses 2 or 3 bytes,
+    depending on whether it is negated or not. Notice this where we can. */
+
+    case '[':
+    class_charcount = 0;
+    if (*(++ptr) == '^') ptr++;
+    do
+      {
+      if (*ptr == '\\')
+        {
+        int ch = check_escape(&ptr, errorptr, bracount, options, TRUE,
+          &compile_block);
+        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
+        if (-ch == ESC_b) class_charcount++; else class_charcount = 10;
+        }
+      else class_charcount++;
+      ptr++;
+      }
+    while (*ptr != 0 && *ptr != ']');
+
+    /* Repeats for negated single chars are handled by the general code */
+
+    if (class_charcount == 1) length += 3; else
+      {
+      length += 33;
+
+      /* A repeat needs either 1 or 5 bytes. */
+
+      if (*ptr != 0 && ptr[1] == '{' && is_counted_repeat(ptr+2, &compile_block))
+        {
+        ptr = read_repeat_counts(ptr+2, &min, &max, errorptr, &compile_block);
+        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
+        if ((min == 0 && (max == 1 || max == -1)) ||
+          (min == 1 && max == -1))
+            length++;
+        else length += 5;
+        if (ptr[1] == '?') ptr++;
+        }
+      }
+    continue;
+
+    /* Brackets may be genuine groups or special things */
+
+    case '(':
+    branch_newextra = 0;
+
+    /* Handle special forms of bracket, which all start (? */
+
+    if (ptr[1] == '?')
+      {
+      int set, unset;
+      int *optset;
+
+      switch (c = ptr[2])
+        {
+        /* Skip over comments entirely */
+        case '#':
+        ptr += 3;
+        while (*ptr != 0 && *ptr != ')') ptr++;
+        if (*ptr == 0)
+          {
+          *errorptr = ERR18;
+          goto PCRE_ERROR_RETURN;
+          }
+        continue;
+
+        /* Non-referencing groups and lookaheads just move the pointer on, and
+        then behave like a non-special bracket, except that they don't increment
+        the count of extracting brackets. Ditto for the "once only" bracket,
+        which is in Perl from version 5.005. */
+
+        case ':':
+        case '=':
+        case '!':
+        case '>':
+        ptr += 2;
+        break;
+
+        /* A recursive call to the regex is an extension, to provide the
+        facility which can be obtained by $(?p{perl-code}) in Perl 5.6. */
+
+        case 'R':
+        if (ptr[3] != ')')
+          {
+          *errorptr = ERR29;
+          goto PCRE_ERROR_RETURN;
+          }
+        ptr += 3;
+        length += 1;
+        break;
+
+        /* Lookbehinds are in Perl from version 5.005 */
+
+        case '<':
+        if (ptr[3] == '=' || ptr[3] == '!')
+          {
+          ptr += 3;
+          branch_newextra = 3;
+          length += 3;         /* For the first branch */
+          break;
+          }
+        *errorptr = ERR24;
+        goto PCRE_ERROR_RETURN;
+
+        /* Conditionals are in Perl from version 5.005. The bracket must either
+        be followed by a number (for bracket reference) or by an assertion
+        group. */
+
+        case '(':
+        if ((compile_block.ctypes[ptr[3]] & ctype_digit) != 0)
+          {
+          ptr += 4;
+          length += 2;
+          while ((compile_block.ctypes[*ptr] & ctype_digit) != 0) ptr++;
+          if (*ptr != ')')
+            {
+            *errorptr = ERR26;
+            goto PCRE_ERROR_RETURN;
+            }
+          }
+        else   /* An assertion must follow */
+          {
+          ptr++;   /* Can treat like ':' as far as spacing is concerned */
+
+          if (ptr[2] != '?' || strchr("=!<", ptr[3]) == NULL)
+            {
+            ptr += 2;    /* To get right offset in message */
+            *errorptr = ERR28;
+            goto PCRE_ERROR_RETURN;
+            }
+          }
+        break;
+
+        /* Else loop checking valid options until ) is met. Anything else is an
+        error. If we are without any brackets, i.e. at top level, the settings
+        act as if specified in the options, so massage the options immediately.
+        This is for backward compatibility with Perl 5.004. */
+
+        default:
+        set = unset = 0;
+        optset = &set;
+        ptr += 2;
+
+        for (;; ptr++)
+          {
+          c = *ptr;
+          switch (c)
+            {
+            case 'i':
+            *optset |= PCRE_CASELESS;
+            continue;
+
+            case 'm':
+            *optset |= PCRE_MULTILINE;
+            continue;
+
+            case 's':
+            *optset |= PCRE_DOTALL;
+            continue;
+
+            case 'x':
+            *optset |= PCRE_EXTENDED;
+            continue;
+
+            case 'X':
+            *optset |= PCRE_EXTRA;
+            continue;
+
+            case 'U':
+            *optset |= PCRE_UNGREEDY;
+            continue;
+
+            case '-':
+            optset = &unset;
+            continue;
+
+            /* A termination by ')' indicates an options-setting-only item;
+            this is global at top level; otherwise nothing is done here and
+            it is handled during the compiling process on a per-bracket-group
+            basis. */
+
+            case ')':
+            if (brastackptr == 0)
+              {
+              options = (options | set) & (~unset);
+              set = unset = 0;     /* To save length */
+              }
+            /* Fall through */
+
+            /* A termination by ':' indicates the start of a nested group with
+            the given options set. This is again handled at compile time, but
+            we must allow for compiled space if any of the ims options are
+            set. We also have to allow for resetting space at the end of
+            the group, which is why 4 is added to the length and not just 2.
+            If there are several changes of options within the same group, this
+            will lead to an over-estimate on the length, but this shouldn't
+            matter very much. We also have to allow for resetting options at
+            the start of any alternations, which we do by setting
+            branch_newextra to 2. Finally, we record whether the case-dependent
+            flag ever changes within the regex. This is used by the "required
+            character" code. */
+
+            case ':':
+            if (((set|unset) & PCRE_IMS) != 0)
+              {
+              length += 4;
+              branch_newextra = 2;
+              if (((set|unset) & PCRE_CASELESS) != 0) options |= PCRE_ICHANGED;
+              }
+            goto END_OPTIONS;
+
+            /* Unrecognized option character */
+
+            default:
+            *errorptr = ERR12;
+            goto PCRE_ERROR_RETURN;
+            }
+          }
+
+        /* If we hit a closing bracket, that's it - this is a freestanding
+        option-setting. We need to ensure that branch_extra is updated if
+        necessary. The only values branch_newextra can have here are 0 or 2.
+        If the value is 2, then branch_extra must either be 2 or 5, depending
+        on whether this is a lookbehind group or not. */
+
+        END_OPTIONS:
+        if (c == ')')
+          {
+          if (branch_newextra == 2 && (branch_extra == 0 || branch_extra == 3))
+            branch_extra += branch_newextra;
+          continue;
+          }
+
+        /* If options were terminated by ':' control comes here. Fall through
+        to handle the group below. */
+        }
+      }
+
+    /* Extracting brackets must be counted so we can process escapes in a
+    Perlish way. */
+
+    else bracount++;
+
+    /* Non-special forms of bracket. Save length for computing whole length
+    at end if there's a repeat that requires duplication of the group. Also
+    save the current value of branch_extra, and start the new group with
+    the new value. If non-zero, this will either be 2 for a (?imsx: group, or 3
+    for a lookbehind assertion. */
+
+    if (brastackptr >= sizeof(brastack)/sizeof(int))
+      {
+      *errorptr = ERR19;
+      goto PCRE_ERROR_RETURN;
+      }
+
+    bralenstack[brastackptr] = branch_extra;
+    branch_extra = branch_newextra;
+
+    brastack[brastackptr++] = length;
+    length += 3;
+    continue;
+
+    /* Handle ket. Look for subsequent max/min; for certain sets of values we
+    have to replicate this bracket up to that many times. If brastackptr is
+    0 this is an unmatched bracket which will generate an error, but take care
+    not to try to access brastack[-1] when computing the length and restoring
+    the branch_extra value. */
+
+    case ')':
+    length += 3;
+      {
+      int minval = 1;
+      int maxval = 1;
+      int duplength;
+
+      if (brastackptr > 0)
+        {
+        duplength = length - brastack[--brastackptr];
+        branch_extra = bralenstack[brastackptr];
+        }
+      else duplength = 0;
+
+      /* Leave ptr at the final char; for read_repeat_counts this happens
+      automatically; for the others we need an increment. */
+
+      if ((c = ptr[1]) == '{' && is_counted_repeat(ptr+2, &compile_block))
+        {
+        ptr = read_repeat_counts(ptr+2, &minval, &maxval, errorptr,
+          &compile_block);
+        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
+        }
+      else if (c == '*') { minval = 0; maxval = -1; ptr++; }
+      else if (c == '+') { maxval = -1; ptr++; }
+      else if (c == '?') { minval = 0; ptr++; }
+
+      /* If the minimum is zero, we have to allow for an OP_BRAZERO before the
+      group, and if the maximum is greater than zero, we have to replicate
+      maxval-1 times; each replication acquires an OP_BRAZERO plus a nesting
+      bracket set - hence the 7. */
+
+      if (minval == 0)
+        {
+        length++;
+        if (maxval > 0) length += (maxval - 1) * (duplength + 7);
+        }
+
+      /* When the minimum is greater than zero, 1 we have to replicate up to
+      minval-1 times, with no additions required in the copies. Then, if
+      there is a limited maximum we have to replicate up to maxval-1 times
+      allowing for a BRAZERO item before each optional copy and nesting
+      brackets for all but one of the optional copies. */
+
+      else
+        {
+        length += (minval - 1) * duplength;
+        if (maxval > minval)   /* Need this test as maxval=-1 means no limit */
+          length += (maxval - minval) * (duplength + 7) - 6;
+        }
+      }
+    continue;
+
+    /* Non-special character. For a run of such characters the length required
+    is the number of characters + 2, except that the maximum run length is 255.
+    We won't get a skipped space or a non-data escape or the start of a #
+    comment as the first character, so the length can't be zero. */
+
+    NORMAL_CHAR:
+    default:
+    length += 2;
+    runlength = 0;
+    do
+      {
+      if ((options & PCRE_EXTENDED) != 0)
+        {
+        if ((compile_block.ctypes[c] & ctype_space) != 0) continue;
+        if (c == '#')
+          {
+          while ((c = *(++ptr)) != 0 && c != '\n');
+          continue;
+          }
+        }
+
+      /* Backslash may introduce a data char or a metacharacter; stop the
+      string before the latter. */
+
+      if (c == '\\')
+        {
+        const uschar *saveptr = ptr;
+        c = check_escape(&ptr, errorptr, bracount, options, FALSE,
+          &compile_block);
+        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
+        if (c < 0) { ptr = saveptr; break; }
+        }
+
+      /* Ordinary character or single-char escape */
+
+      runlength++;
+      }
+
+    /* This "while" is the end of the "do" above. */
+
+    while (runlength < 255 &&
+      (compile_block.ctypes[c = *(++ptr)] & ctype_meta) == 0);
+
+    ptr--;
+    length += runlength;
+    continue;
+    }
+  }
+
+length += 4;    /* For final KET and END */
+
+if (length > 65539)
+  {
+  *errorptr = ERR20;
+  return NULL;
+  }
+
+/* Compute the size of data block needed and get it, either from malloc or
+externally provided function. We specify "code[0]" in the offsetof() expression
+rather than just "code", because it has been reported that one broken compiler
+fails on "code" because it is also an independent variable. It should make no
+difference to the value of the offsetof(). */
+
+size = length + offsetof(real_pcre, code[0]);
+re = (real_pcre *)(pcre_malloc)(size);
+
+if (re == NULL)
+  {
+  *errorptr = ERR21;
+  return NULL;
+  }
+
+/* Put in the magic number, and save the size, options, and table pointer */
+
+re->magic_number = MAGIC_NUMBER;
+re->size = size;
+re->options = options;
+re->tables = tables;
+
+/* Set up a starting, non-extracting bracket, then compile the expression. On
+error, *errorptr will be set non-NULL, so we don't need to look at the result
+of the function here. */
+
+ptr = (const uschar *)pattern;
+code = re->code;
+*code = OP_BRA;
+bracount = 0;
+(void)compile_regex(options, -1, &bracount, &code, &ptr, errorptr, FALSE, -1,
+  &reqchar, &countlits, &compile_block);
+re->top_bracket = bracount;
+re->top_backref = top_backref;
+
+/* If not reached end of pattern on success, there's an excess bracket. */
+
+if (*errorptr == NULL && *ptr != 0) *errorptr = ERR22;
+
+/* Fill in the terminating state and check for disastrous overflow, but
+if debugging, leave the test till after things are printed out. */
+
+*code++ = OP_END;
+
+#ifndef DEBUG
+if (code - re->code > length) *errorptr = ERR23;
+#endif
+
+/* Give an error if there's back reference to a non-existent capturing
+subpattern. */
+
+if (top_backref > re->top_bracket) *errorptr = ERR15;
+
+/* Failed to compile */
+
+if (*errorptr != NULL)
+  {
+  (pcre_free)(re);
+  PCRE_ERROR_RETURN:
+  *erroroffset = ptr - (const uschar *)pattern;
+  return NULL;
+  }
+
+/* If the anchored option was not passed, set flag if we can determine that the
+pattern is anchored by virtue of ^ characters or \A or anything else (such as
+starting with .* when DOTALL is set).
+
+Otherwise, see if we can determine what the first character has to be, because
+that speeds up unanchored matches no end. If not, see if we can set the
+PCRE_STARTLINE flag. This is helpful for multiline matches when all branches
+start with ^. and also when all branches start with .* for non-DOTALL matches.
+*/
+
+if ((options & PCRE_ANCHORED) == 0)
+  {
+  int temp_options = options;
+  if (is_anchored(re->code, &temp_options))
+    re->options |= PCRE_ANCHORED;
+  else
+    {
+    int ch = find_firstchar(re->code, &temp_options);
+    if (ch >= 0)
+      {
+      re->first_char = ch;
+      re->options |= PCRE_FIRSTSET;
+      }
+    else if (is_startline(re->code))
+      re->options |= PCRE_STARTLINE;
+    }
+  }
+
+/* Save the last required character if there are at least two literal
+characters on all paths, or if there is no first character setting. */
+
+if (reqchar >= 0 && (countlits > 1 || (re->options & PCRE_FIRSTSET) == 0))
+  {
+  re->req_char = reqchar;
+  re->options |= PCRE_REQCHSET;
+  }
+
+/* Print out the compiled data for debugging */
+
+#ifdef DEBUG
+
+printf("Length = %d top_bracket = %d top_backref = %d\n",
+  length, re->top_bracket, re->top_backref);
+
+if (re->options != 0)
+  {
+  printf("%s%s%s%s%s%s%s%s%s\n",
+    ((re->options & PCRE_ANCHORED) != 0)? "anchored " : "",
+    ((re->options & PCRE_CASELESS) != 0)? "caseless " : "",
+    ((re->options & PCRE_ICHANGED) != 0)? "case state changed " : "",
+    ((re->options & PCRE_EXTENDED) != 0)? "extended " : "",
+    ((re->options & PCRE_MULTILINE) != 0)? "multiline " : "",
+    ((re->options & PCRE_DOTALL) != 0)? "dotall " : "",
+    ((re->options & PCRE_DOLLAR_ENDONLY) != 0)? "endonly " : "",
+    ((re->options & PCRE_EXTRA) != 0)? "extra " : "",
+    ((re->options & PCRE_UNGREEDY) != 0)? "ungreedy " : "");
+  }
+
+if ((re->options & PCRE_FIRSTSET) != 0)
+  {
+  if (isprint(re->first_char)) printf("First char = %c\n", re->first_char);
+    else printf("First char = \\x%02x\n", re->first_char);
+  }
+
+if ((re->options & PCRE_REQCHSET) != 0)
+  {
+  if (isprint(re->req_char)) printf("Req char = %c\n", re->req_char);
+    else printf("Req char = \\x%02x\n", re->req_char);
+  }
+
+code_end = code;
+code_base = code = re->code;
+
+while (code < code_end)
+  {
+  int charlength;
+
+  printf("%3d ", code - code_base);
+
+  if (*code >= OP_BRA)
+    {
+    printf("%3d Bra %d", (code[1] << 8) + code[2], *code - OP_BRA);
+    code += 2;
+    }
+
+  else switch(*code)
+    {
+    case OP_OPT:
+    printf(" %.2x %s", code[1], OP_names[*code]);
+    code++;
+    break;
+
+    case OP_COND:
+    printf("%3d Cond", (code[1] << 8) + code[2]);
+    code += 2;
+    break;
+
+    case OP_CREF:
+    printf(" %.2d %s", code[1], OP_names[*code]);
+    code++;
+    break;
+
+    case OP_CHARS:
+    charlength = *(++code);
+    printf("%3d ", charlength);
+    while (charlength-- > 0)
+      if (isprint(c = *(++code))) printf("%c", c); else printf("\\x%02x", c);
+    break;
+
+    case OP_KETRMAX:
+    case OP_KETRMIN:
+    case OP_ALT:
+    case OP_KET:
+    case OP_ASSERT:
+    case OP_ASSERT_NOT:
+    case OP_ASSERTBACK:
+    case OP_ASSERTBACK_NOT:
+    case OP_ONCE:
+    printf("%3d %s", (code[1] << 8) + code[2], OP_names[*code]);
+    code += 2;
+    break;
+
+    case OP_REVERSE:
+    printf("%3d %s", (code[1] << 8) + code[2], OP_names[*code]);
+    code += 2;
+    break;
+
+    case OP_STAR:
+    case OP_MINSTAR:
+    case OP_PLUS:
+    case OP_MINPLUS:
+    case OP_QUERY:
+    case OP_MINQUERY:
+    case OP_TYPESTAR:
+    case OP_TYPEMINSTAR:
+    case OP_TYPEPLUS:
+    case OP_TYPEMINPLUS:
+    case OP_TYPEQUERY:
+    case OP_TYPEMINQUERY:
+    if (*code >= OP_TYPESTAR)
+      printf("    %s", OP_names[code[1]]);
+    else if (isprint(c = code[1])) printf("    %c", c);
+      else printf("    \\x%02x", c);
+    printf("%s", OP_names[*code++]);
+    break;
+
+    case OP_EXACT:
+    case OP_UPTO:
+    case OP_MINUPTO:
+    if (isprint(c = code[3])) printf("    %c{", c);
+      else printf("    \\x%02x{", c);
+    if (*code != OP_EXACT) printf("0,");
+    printf("%d}", (code[1] << 8) + code[2]);
+    if (*code == OP_MINUPTO) printf("?");
+    code += 3;
+    break;
+
+    case OP_TYPEEXACT:
+    case OP_TYPEUPTO:
+    case OP_TYPEMINUPTO:
+    printf("    %s{", OP_names[code[3]]);
+    if (*code != OP_TYPEEXACT) printf(",");
+    printf("%d}", (code[1] << 8) + code[2]);
+    if (*code == OP_TYPEMINUPTO) printf("?");
+    code += 3;
+    break;
+
+    case OP_NOT:
+    if (isprint(c = *(++code))) printf("    [^%c]", c);
+      else printf("    [^\\x%02x]", c);
+    break;
+
+    case OP_NOTSTAR:
+    case OP_NOTMINSTAR:
+    case OP_NOTPLUS:
+    case OP_NOTMINPLUS:
+    case OP_NOTQUERY:
+    case OP_NOTMINQUERY:
+    if (isprint(c = code[1])) printf("    [^%c]", c);
+      else printf("    [^\\x%02x]", c);
+    printf("%s", OP_names[*code++]);
+    break;
+
+    case OP_NOTEXACT:
+    case OP_NOTUPTO:
+    case OP_NOTMINUPTO:
+    if (isprint(c = code[3])) printf("    [^%c]{", c);
+      else printf("    [^\\x%02x]{", c);
+    if (*code != OP_NOTEXACT) printf(",");
+    printf("%d}", (code[1] << 8) + code[2]);
+    if (*code == OP_NOTMINUPTO) printf("?");
+    code += 3;
+    break;
+
+    case OP_REF:
+    printf("    \\%d", *(++code));
+    code ++;
+    goto CLASS_REF_REPEAT;
+
+    case OP_CLASS:
+      {
+      int i, min, max;
+      code++;
+      printf("    [");
+
+      for (i = 0; i < 256; i++)
+        {
+        if ((code[i/8] & (1 << (i&7))) != 0)
+          {
+          int j;
+          for (j = i+1; j < 256; j++)
+            if ((code[j/8] & (1 << (j&7))) == 0) break;
+          if (i == '-' || i == ']') printf("\\");
+          if (isprint(i)) printf("%c", i); else printf("\\x%02x", i);
+          if (--j > i)
+            {
+            printf("-");
+            if (j == '-' || j == ']') printf("\\");
+            if (isprint(j)) printf("%c", j); else printf("\\x%02x", j);
+            }
+          i = j;
+          }
+        }
+      printf("]");
+      code += 32;
+
+      CLASS_REF_REPEAT:
+
+      switch(*code)
+        {
+        case OP_CRSTAR:
+        case OP_CRMINSTAR:
+        case OP_CRPLUS:
+        case OP_CRMINPLUS:
+        case OP_CRQUERY:
+        case OP_CRMINQUERY:
+        printf("%s", OP_names[*code]);
+        break;
+
+        case OP_CRRANGE:
+        case OP_CRMINRANGE:
+        min = (code[1] << 8) + code[2];
+        max = (code[3] << 8) + code[4];
+        if (max == 0) printf("{%d,}", min);
+        else printf("{%d,%d}", min, max);
+        if (*code == OP_CRMINRANGE) printf("?");
+        code += 4;
+        break;
+
+        default:
+        code--;
+        }
+      }
+    break;
+
+    /* Anything else is just a one-node item */
+
+    default:
+    printf("    %s", OP_names[*code]);
+    break;
+    }
+
+  code++;
+  printf("\n");
+  }
+printf("------------------------------------------------------------------\n");
+
+/* This check is done here in the debugging case so that the code that
+was compiled can be seen. */
+
+if (code - re->code > length)
+  {
+  *errorptr = ERR23;
+  (pcre_free)(re);
+  *erroroffset = ptr - (uschar *)pattern;
+  return NULL;
+  }
+#endif
+
+return (pcre *)re;
+}
+
+
+
+/*************************************************
+*          Match a back-reference                *
+*************************************************/
+
+/* If a back reference hasn't been set, the length that is passed is greater
+than the number of characters left in the string, so the match fails.
+
+Arguments:
+  offset      index into the offset vector
+  eptr        points into the subject
+  length      length to be matched
+  md          points to match data block
+  ims         the ims flags
+
+Returns:      TRUE if matched
+*/
+
+static BOOL
+match_ref(int offset, register const uschar *eptr, int length, match_data *md,
+  unsigned long int ims)
+{
+const uschar *p = md->start_subject + md->offset_vector[offset];
+
+#ifdef DEBUG
+if (eptr >= md->end_subject)
+  printf("matching subject <null>");
+else
+  {
+  printf("matching subject ");
+  pchars(eptr, length, TRUE, md);
+  }
+printf(" against backref ");
+pchars(p, length, FALSE, md);
+printf("\n");
+#endif
+
+/* Always fail if not enough characters left */
+
+if (length > md->end_subject - eptr) return FALSE;
+
+/* Separate the caselesss case for speed */
+
+if ((ims & PCRE_CASELESS) != 0)
+  {
+  while (length-- > 0)
+    if (md->lcc[*p++] != md->lcc[*eptr++]) return FALSE;
+  }
+else
+  { while (length-- > 0) if (*p++ != *eptr++) return FALSE; }
+
+return TRUE;
+}
+
+
+
+/*************************************************
+*         Match from current position            *
+*************************************************/
+
+/* On entry ecode points to the first opcode, and eptr to the first character
+in the subject string, while eptrb holds the value of eptr at the start of the
+last bracketed group - used for breaking infinite loops matching zero-length
+strings.
+
+Arguments:
+   eptr        pointer in subject
+   ecode       position in code
+   offset_top  current top pointer
+   md          pointer to "static" info for the match
+   ims         current /i, /m, and /s options
+   condassert  TRUE if called to check a condition assertion
+   eptrb       eptr at start of last bracket
+
+Returns:       TRUE if matched
+*/
+
+static BOOL
+match(register const uschar *eptr, register const uschar *ecode,
+  int offset_top, match_data *md, unsigned long int ims, BOOL condassert,
+  const uschar *eptrb)
+{
+unsigned long int original_ims = ims;   /* Save for resetting on ')' */
+
+for (;;)
+  {
+  int op = (int)*ecode;
+  int min, max, ctype;
+  register int i;
+  register int c;
+  BOOL minimize = FALSE;
+
+  /* Opening capturing bracket. If there is space in the offset vector, save
+  the current subject position in the working slot at the top of the vector. We
+  mustn't change the current values of the data slot, because they may be set
+  from a previous iteration of this group, and be referred to by a reference
+  inside the group.
+
+  If the bracket fails to match, we need to restore this value and also the
+  values of the final offsets, in case they were set by a previous iteration of
+  the same bracket.
+
+  If there isn't enough space in the offset vector, treat this as if it were a
+  non-capturing bracket. Don't worry about setting the flag for the error case
+  here; that is handled in the code for KET. */
+
+  if (op > OP_BRA)
+    {
+    int number = op - OP_BRA;
+    int offset = number << 1;
+
+#ifdef DEBUG
+    printf("start bracket %d subject=", number);
+    pchars(eptr, 16, TRUE, md);
+    printf("\n");
+#endif
+
+    if (offset < md->offset_max)
+      {
+      int save_offset1 = md->offset_vector[offset];
+      int save_offset2 = md->offset_vector[offset+1];
+      int save_offset3 = md->offset_vector[md->offset_end - number];
+
+      DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3));
+      md->offset_vector[md->offset_end - number] = eptr - md->start_subject;
+
+      do
+        {
+        if (match(eptr, ecode+3, offset_top, md, ims, FALSE, eptr)) return TRUE;
+        ecode += (ecode[1] << 8) + ecode[2];
+        }
+      while (*ecode == OP_ALT);
+
+      DPRINTF(("bracket %d failed\n", number));
+
+      md->offset_vector[offset] = save_offset1;
+      md->offset_vector[offset+1] = save_offset2;
+      md->offset_vector[md->offset_end - number] = save_offset3;
+      return FALSE;
+      }
+
+    /* Insufficient room for saving captured contents */
+
+    else op = OP_BRA;
+    }
+
+  /* Other types of node can be handled by a switch */
+
+  switch(op)
+    {
+    case OP_BRA:     /* Non-capturing bracket: optimized */
+    DPRINTF(("start bracket 0\n"));
+    do
+      {
+      if (match(eptr, ecode+3, offset_top, md, ims, FALSE, eptr)) return TRUE;
+      ecode += (ecode[1] << 8) + ecode[2];
+      }
+    while (*ecode == OP_ALT);
+    DPRINTF(("bracket 0 failed\n"));
+    return FALSE;
+
+    /* Conditional group: compilation checked that there are no more than
+    two branches. If the condition is false, skipping the first branch takes us
+    past the end if there is only one branch, but that's OK because that is
+    exactly what going to the ket would do. */
+
+    case OP_COND:
+    if (ecode[3] == OP_CREF)         /* Condition is extraction test */
+      {
+      int offset = ecode[4] << 1;    /* Doubled reference number */
+      return match(eptr,
+        ecode + ((offset < offset_top && md->offset_vector[offset] >= 0)?
+          5 : 3 + (ecode[1] << 8) + ecode[2]),
+        offset_top, md, ims, FALSE, eptr);
+      }
+
+    /* The condition is an assertion. Call match() to evaluate it - setting
+    the final argument TRUE causes it to stop at the end of an assertion. */
+
+    else
+      {
+      if (match(eptr, ecode+3, offset_top, md, ims, TRUE, NULL))
+        {
+        ecode += 3 + (ecode[4] << 8) + ecode[5];
+        while (*ecode == OP_ALT) ecode += (ecode[1] << 8) + ecode[2];
+        }
+      else ecode += (ecode[1] << 8) + ecode[2];
+      return match(eptr, ecode+3, offset_top, md, ims, FALSE, eptr);
+      }
+    /* Control never reaches here */
+
+    /* Skip over conditional reference data if encountered (should not be) */
+
+    case OP_CREF:
+    ecode += 2;
+    break;
+
+    /* End of the pattern. If PCRE_NOTEMPTY is set, fail if we have matched
+    an empty string - recursion will then try other alternatives, if any. */
+
+    case OP_END:
+    if (md->notempty && eptr == md->start_match) return FALSE;
+    md->end_match_ptr = eptr;          /* Record where we ended */
+    md->end_offset_top = offset_top;   /* and how many extracts were taken */
+    return TRUE;
+
+    /* Change option settings */
+
+    case OP_OPT:
+    ims = ecode[1];
+    ecode += 2;
+    DPRINTF(("ims set to %02lx\n", ims));
+    break;
+
+    /* Assertion brackets. Check the alternative branches in turn - the
+    matching won't pass the KET for an assertion. If any one branch matches,
+    the assertion is true. Lookbehind assertions have an OP_REVERSE item at the
+    start of each branch to move the current point backwards, so the code at
+    this level is identical to the lookahead case. */
+
+    case OP_ASSERT:
+    case OP_ASSERTBACK:
+    do
+      {
+      if (match(eptr, ecode+3, offset_top, md, ims, FALSE, NULL)) break;
+      ecode += (ecode[1] << 8) + ecode[2];
+      }
+    while (*ecode == OP_ALT);
+    if (*ecode == OP_KET) return FALSE;
+
+    /* If checking an assertion for a condition, return TRUE. */
+
+    if (condassert) return TRUE;
+
+    /* Continue from after the assertion, updating the offsets high water
+    mark, since extracts may have been taken during the assertion. */
+
+    do ecode += (ecode[1] << 8) + ecode[2]; while (*ecode == OP_ALT);
+    ecode += 3;
+    offset_top = md->end_offset_top;
+    continue;
+
+    /* Negative assertion: all branches must fail to match */
+
+    case OP_ASSERT_NOT:
+    case OP_ASSERTBACK_NOT:
+    do
+      {
+      if (match(eptr, ecode+3, offset_top, md, ims, FALSE, NULL)) return FALSE;
+      ecode += (ecode[1] << 8) + ecode[2];
+      }
+    while (*ecode == OP_ALT);
+
+    if (condassert) return TRUE;
+    ecode += 3;
+    continue;
+
+    /* Move the subject pointer back. This occurs only at the start of
+    each branch of a lookbehind assertion. If we are too close to the start to
+    move back, this match function fails. */
+
+    case OP_REVERSE:
+    eptr -= (ecode[1] << 8) + ecode[2];
+    if (eptr < md->start_subject) return FALSE;
+    ecode += 3;
+    break;
+
+    /* Recursion matches the current regex, nested. If there are any capturing
+    brackets started but not finished, we have to save their starting points
+    and reinstate them after the recursion. However, we don't know how many
+    such there are (offset_top records the completed total) so we just have
+    to save all the potential data. There may be up to 99 such values, which
+    is a bit large to put on the stack, but using malloc for small numbers
+    seems expensive. As a compromise, the stack is used when there are fewer
+    than 16 values to store; otherwise malloc is used. A problem is what to do
+    if the malloc fails ... there is no way of returning to the top level with
+    an error. Save the top 15 values on the stack, and accept that the rest
+    may be wrong. */
+
+    case OP_RECURSE:
+      {
+      BOOL rc;
+      int *save;
+      int stacksave[15];
+
+      c = md->offset_max;
+
+      if (c < 16) save = stacksave; else
+        {
+        save = (int *)(pcre_malloc)((c+1) * sizeof(int));
+        if (save == NULL)
+          {
+          save = stacksave;
+          c = 15;
+          }
+        }
+
+      for (i = 1; i <= c; i++)
+        save[i] = md->offset_vector[md->offset_end - i];
+      rc = match(eptr, md->start_pattern, offset_top, md, ims, FALSE, eptrb);
+      for (i = 1; i <= c; i++)
+        md->offset_vector[md->offset_end - i] = save[i];
+      if (save != stacksave) (pcre_free)(save);
+      if (!rc) return FALSE;
+
+      /* In case the recursion has set more capturing values, save the final
+      number, then move along the subject till after the recursive match,
+      and advance one byte in the pattern code. */
+
+      offset_top = md->end_offset_top;
+      eptr = md->end_match_ptr;
+      ecode++;
+      }
+    break;
+
+    /* "Once" brackets are like assertion brackets except that after a match,
+    the point in the subject string is not moved back. Thus there can never be
+    a move back into the brackets. Check the alternative branches in turn - the
+    matching won't pass the KET for this kind of subpattern. If any one branch
+    matches, we carry on as at the end of a normal bracket, leaving the subject
+    pointer. */
+
+    case OP_ONCE:
+      {
+      const uschar *prev = ecode;
+
+      do
+        {
+        if (match(eptr, ecode+3, offset_top, md, ims, FALSE, eptr)) break;
+        ecode += (ecode[1] << 8) + ecode[2];
+        }
+      while (*ecode == OP_ALT);
+
+      /* If hit the end of the group (which could be repeated), fail */
+
+      if (*ecode != OP_ONCE && *ecode != OP_ALT) return FALSE;
+
+      /* Continue as from after the assertion, updating the offsets high water
+      mark, since extracts may have been taken. */
+
+      do ecode += (ecode[1] << 8) + ecode[2]; while (*ecode == OP_ALT);
+
+      offset_top = md->end_offset_top;
+      eptr = md->end_match_ptr;
+
+      /* For a non-repeating ket, just continue at this level. This also
+      happens for a repeating ket if no characters were matched in the group.
+      This is the forcible breaking of infinite loops as implemented in Perl
+      5.005. If there is an options reset, it will get obeyed in the normal
+      course of events. */
+
+      if (*ecode == OP_KET || eptr == eptrb)
+        {
+        ecode += 3;
+        break;
+        }
+
+      /* The repeating kets try the rest of the pattern or restart from the
+      preceding bracket, in the appropriate order. We need to reset any options
+      that changed within the bracket before re-running it, so check the next
+      opcode. */
+
+      if (ecode[3] == OP_OPT)
+        {
+        ims = (ims & ~PCRE_IMS) | ecode[4];
+        DPRINTF(("ims set to %02lx at group repeat\n", ims));
+        }
+
+      if (*ecode == OP_KETRMIN)
+        {
+        if (match(eptr, ecode+3, offset_top, md, ims, FALSE, eptr) ||
+            match(eptr, prev, offset_top, md, ims, FALSE, eptr)) return TRUE;
+        }
+      else  /* OP_KETRMAX */
+        {
+        if (match(eptr, prev, offset_top, md, ims, FALSE, eptr) ||
+            match(eptr, ecode+3, offset_top, md, ims, FALSE, eptr)) return TRUE;
+        }
+      }
+    return FALSE;
+
+    /* An alternation is the end of a branch; scan along to find the end of the
+    bracketed group and go to there. */
+
+    case OP_ALT:
+    do ecode += (ecode[1] << 8) + ecode[2]; while (*ecode == OP_ALT);
+    break;
+
+    /* BRAZERO and BRAMINZERO occur just before a bracket group, indicating
+    that it may occur zero times. It may repeat infinitely, or not at all -
+    i.e. it could be ()* or ()? in the pattern. Brackets with fixed upper
+    repeat limits are compiled as a number of copies, with the optional ones
+    preceded by BRAZERO or BRAMINZERO. */
+
+    case OP_BRAZERO:
+      {
+      const uschar *next = ecode+1;
+      if (match(eptr, next, offset_top, md, ims, FALSE, eptr)) return TRUE;
+      do next += (next[1] << 8) + next[2]; while (*next == OP_ALT);
+      ecode = next + 3;
+      }
+    break;
+
+    case OP_BRAMINZERO:
+      {
+      const uschar *next = ecode+1;
+      do next += (next[1] << 8) + next[2]; while (*next == OP_ALT);
+      if (match(eptr, next+3, offset_top, md, ims, FALSE, eptr)) return TRUE;
+      ecode++;
+      }
+    break;
+
+    /* End of a group, repeated or non-repeating. If we are at the end of
+    an assertion "group", stop matching and return TRUE, but record the
+    current high water mark for use by positive assertions. Do this also
+    for the "once" (not-backup up) groups. */
+
+    case OP_KET:
+    case OP_KETRMIN:
+    case OP_KETRMAX:
+      {
+      const uschar *prev = ecode - (ecode[1] << 8) - ecode[2];
+
+      if (*prev == OP_ASSERT || *prev == OP_ASSERT_NOT ||
+          *prev == OP_ASSERTBACK || *prev == OP_ASSERTBACK_NOT ||
+          *prev == OP_ONCE)
+        {
+        md->end_match_ptr = eptr;      /* For ONCE */
+        md->end_offset_top = offset_top;
+        return TRUE;
+        }
+
+      /* In all other cases except a conditional group we have to check the
+      group number back at the start and if necessary complete handling an
+      extraction by setting the offsets and bumping the high water mark. */
+
+      if (*prev != OP_COND)
+        {
+        int number = *prev - OP_BRA;
+        int offset = number << 1;
+
+        DPRINTF(("end bracket %d\n", number));
+
+        if (number > 0)
+          {
+          if (offset >= md->offset_max) md->offset_overflow = TRUE; else
+            {
+            md->offset_vector[offset] =
+              md->offset_vector[md->offset_end - number];
+            md->offset_vector[offset+1] = eptr - md->start_subject;
+            if (offset_top <= offset) offset_top = offset + 2;
+            }
+          }
+        }
+
+      /* Reset the value of the ims flags, in case they got changed during
+      the group. */
+
+      ims = original_ims;
+      DPRINTF(("ims reset to %02lx\n", ims));
+
+      /* For a non-repeating ket, just continue at this level. This also
+      happens for a repeating ket if no characters were matched in the group.
+      This is the forcible breaking of infinite loops as implemented in Perl
+      5.005. If there is an options reset, it will get obeyed in the normal
+      course of events. */
+
+      if (*ecode == OP_KET || eptr == eptrb)
+        {
+        ecode += 3;
+        break;
+        }
+
+      /* The repeating kets try the rest of the pattern or restart from the
+      preceding bracket, in the appropriate order. */
+
+      if (*ecode == OP_KETRMIN)
+        {
+        if (match(eptr, ecode+3, offset_top, md, ims, FALSE, eptr) ||
+            match(eptr, prev, offset_top, md, ims, FALSE, eptr)) return TRUE;
+        }
+      else  /* OP_KETRMAX */
+        {
+        if (match(eptr, prev, offset_top, md, ims, FALSE, eptr) ||
+            match(eptr, ecode+3, offset_top, md, ims, FALSE, eptr)) return TRUE;
+        }
+      }
+    return FALSE;
+
+    /* Start of subject unless notbol, or after internal newline if multiline */
+
+    case OP_CIRC:
+    if (md->notbol && eptr == md->start_subject) return FALSE;
+    if ((ims & PCRE_MULTILINE) != 0)
+      {
+      if (eptr != md->start_subject && eptr[-1] != '\n') return FALSE;
+      ecode++;
+      break;
+      }
+    /* ... else fall through */
+
+    /* Start of subject assertion */
+
+    case OP_SOD:
+    if (eptr != md->start_subject) return FALSE;
+    ecode++;
+    break;
+
+    /* Assert before internal newline if multiline, or before a terminating
+    newline unless endonly is set, else end of subject unless noteol is set. */
+
+    case OP_DOLL:
+    if ((ims & PCRE_MULTILINE) != 0)
+      {
+      if (eptr < md->end_subject) { if (*eptr != '\n') return FALSE; }
+        else { if (md->noteol) return FALSE; }
+      ecode++;
+      break;
+      }
+    else
+      {
+      if (md->noteol) return FALSE;
+      if (!md->endonly)
+        {
+        if (eptr < md->end_subject - 1 ||
+           (eptr == md->end_subject - 1 && *eptr != '\n')) return FALSE;
+
+        ecode++;
+        break;
+        }
+      }
+    /* ... else fall through */
+
+    /* End of subject assertion (\z) */
+
+    case OP_EOD:
+    if (eptr < md->end_subject) return FALSE;
+    ecode++;
+    break;
+
+    /* End of subject or ending \n assertion (\Z) */
+
+    case OP_EODN:
+    if (eptr < md->end_subject - 1 ||
+       (eptr == md->end_subject - 1 && *eptr != '\n')) return FALSE;
+    ecode++;
+    break;
+
+    /* Word boundary assertions */
+
+    case OP_NOT_WORD_BOUNDARY:
+    case OP_WORD_BOUNDARY:
+      {
+      BOOL prev_is_word = (eptr != md->start_subject) &&
+        ((md->ctypes[eptr[-1]] & ctype_word) != 0);
+      BOOL cur_is_word = (eptr < md->end_subject) &&
+        ((md->ctypes[*eptr] & ctype_word) != 0);
+      if ((*ecode++ == OP_WORD_BOUNDARY)?
+           cur_is_word == prev_is_word : cur_is_word != prev_is_word)
+        return FALSE;
+      }
+    break;
+
+    /* Match a single character type; inline for speed */
+
+    case OP_ANY:
+    if ((ims & PCRE_DOTALL) == 0 && eptr < md->end_subject && *eptr == '\n')
+      return FALSE;
+    if (eptr++ >= md->end_subject) return FALSE;
+    ecode++;
+    break;
+
+    case OP_NOT_DIGIT:
+    if (eptr >= md->end_subject ||
+       (md->ctypes[*eptr++] & ctype_digit) != 0)
+      return FALSE;
+    ecode++;
+    break;
+
+    case OP_DIGIT:
+    if (eptr >= md->end_subject ||
+       (md->ctypes[*eptr++] & ctype_digit) == 0)
+      return FALSE;
+    ecode++;
+    break;
+
+    case OP_NOT_WHITESPACE:
+    if (eptr >= md->end_subject ||
+       (md->ctypes[*eptr++] & ctype_space) != 0)
+      return FALSE;
+    ecode++;
+    break;
+
+    case OP_WHITESPACE:
+    if (eptr >= md->end_subject ||
+       (md->ctypes[*eptr++] & ctype_space) == 0)
+      return FALSE;
+    ecode++;
+    break;
+
+    case OP_NOT_WORDCHAR:
+    if (eptr >= md->end_subject ||
+       (md->ctypes[*eptr++] & ctype_word) != 0)
+      return FALSE;
+    ecode++;
+    break;
+
+    case OP_WORDCHAR:
+    if (eptr >= md->end_subject ||
+       (md->ctypes[*eptr++] & ctype_word) == 0)
+      return FALSE;
+    ecode++;
+    break;
+
+    /* Match a back reference, possibly repeatedly. Look past the end of the
+    item to see if there is repeat information following. The code is similar
+    to that for character classes, but repeated for efficiency. Then obey
+    similar code to character type repeats - written out again for speed.
+    However, if the referenced string is the empty string, always treat
+    it as matched, any number of times (otherwise there could be infinite
+    loops). */
+
+    case OP_REF:
+      {
+      int length;
+      int offset = ecode[1] << 1;                /* Doubled reference number */
+      ecode += 2;                                /* Advance past the item */
+
+      /* If the reference is unset, set the length to be longer than the amount
+      of subject left; this ensures that every attempt at a match fails. We
+      can't just fail here, because of the possibility of quantifiers with zero
+      minima. */
+
+      length = (offset >= offset_top || md->offset_vector[offset] < 0)?
+        md->end_subject - eptr + 1 :
+        md->offset_vector[offset+1] - md->offset_vector[offset];
+
+      /* Set up for repetition, or handle the non-repeated case */
+
+      switch (*ecode)
+        {
+        case OP_CRSTAR:
+        case OP_CRMINSTAR:
+        case OP_CRPLUS:
+        case OP_CRMINPLUS:
+        case OP_CRQUERY:
+        case OP_CRMINQUERY:
+        c = *ecode++ - OP_CRSTAR;
+        minimize = (c & 1) != 0;
+        min = rep_min[c];                 /* Pick up values from tables; */
+        max = rep_max[c];                 /* zero for max => infinity */
+        if (max == 0) max = INT_MAX;
+        break;
+
+        case OP_CRRANGE:
+        case OP_CRMINRANGE:
+        minimize = (*ecode == OP_CRMINRANGE);
+        min = (ecode[1] << 8) + ecode[2];
+        max = (ecode[3] << 8) + ecode[4];
+        if (max == 0) max = INT_MAX;
+        ecode += 5;
+        break;
+
+        default:               /* No repeat follows */
+        if (!match_ref(offset, eptr, length, md, ims)) return FALSE;
+        eptr += length;
+        continue;              /* With the main loop */
+        }
+
+      /* If the length of the reference is zero, just continue with the
+      main loop. */
+
+      if (length == 0) continue;
+
+      /* First, ensure the minimum number of matches are present. We get back
+      the length of the reference string explicitly rather than passing the
+      address of eptr, so that eptr can be a register variable. */
+
+      for (i = 1; i <= min; i++)
+        {
+        if (!match_ref(offset, eptr, length, md, ims)) return FALSE;
+        eptr += length;
+        }
+
+      /* If min = max, continue at the same level without recursion.
+      They are not both allowed to be zero. */
+
+      if (min == max) continue;
+
+      /* If minimizing, keep trying and advancing the pointer */
+
+      if (minimize)
+        {
+        for (i = min;; i++)
+          {
+          if (match(eptr, ecode, offset_top, md, ims, FALSE, eptrb))
+            return TRUE;
+          if (i >= max || !match_ref(offset, eptr, length, md, ims))
+            return FALSE;
+          eptr += length;
+          }
+        /* Control never gets here */
+        }
+
+      /* If maximizing, find the longest string and work backwards */
+
+      else
+        {
+        const uschar *pp = eptr;
+        for (i = min; i < max; i++)
+          {
+          if (!match_ref(offset, eptr, length, md, ims)) break;
+          eptr += length;
+          }
+        while (eptr >= pp)
+          {
+          if (match(eptr, ecode, offset_top, md, ims, FALSE, eptrb))
+            return TRUE;
+          eptr -= length;
+          }
+        return FALSE;
+        }
+      }
+    /* Control never gets here */
+
+
+
+    /* Match a character class, possibly repeatedly. Look past the end of the
+    item to see if there is repeat information following. Then obey similar
+    code to character type repeats - written out again for speed. */
+
+    case OP_CLASS:
+      {
+      const uschar *data = ecode + 1;  /* Save for matching */
+      ecode += 33;                     /* Advance past the item */
+
+      switch (*ecode)
+        {
+        case OP_CRSTAR:
+        case OP_CRMINSTAR:
+        case OP_CRPLUS:
+        case OP_CRMINPLUS:
+        case OP_CRQUERY:
+        case OP_CRMINQUERY:
+        c = *ecode++ - OP_CRSTAR;
+        minimize = (c & 1) != 0;
+        min = rep_min[c];                 /* Pick up values from tables; */
+        max = rep_max[c];                 /* zero for max => infinity */
+        if (max == 0) max = INT_MAX;
+        break;
+
+        case OP_CRRANGE:
+        case OP_CRMINRANGE:
+        minimize = (*ecode == OP_CRMINRANGE);
+        min = (ecode[1] << 8) + ecode[2];
+        max = (ecode[3] << 8) + ecode[4];
+        if (max == 0) max = INT_MAX;
+        ecode += 5;
+        break;
+
+        default:               /* No repeat follows */
+        min = max = 1;
+        break;
+        }
+
+      /* First, ensure the minimum number of matches are present. */
+
+      for (i = 1; i <= min; i++)
+        {
+        if (eptr >= md->end_subject) return FALSE;
+        c = *eptr++;
+        if ((data[c/8] & (1 << (c&7))) != 0) continue;
+        return FALSE;
+        }
+
+      /* If max == min we can continue with the main loop without the
+      need to recurse. */
+
+      if (min == max) continue;
+
+      /* If minimizing, keep testing the rest of the expression and advancing
+      the pointer while it matches the class. */
+
+      if (minimize)
+        {
+        for (i = min;; i++)
+          {
+          if (match(eptr, ecode, offset_top, md, ims, FALSE, eptrb))
+            return TRUE;
+          if (i >= max || eptr >= md->end_subject) return FALSE;
+          c = *eptr++;
+          if ((data[c/8] & (1 << (c&7))) != 0) continue;
+          return FALSE;
+          }
+        /* Control never gets here */
+        }
+
+      /* If maximizing, find the longest possible run, then work backwards. */
+
+      else
+        {
+        const uschar *pp = eptr;
+        for (i = min; i < max; eptr++, i++)
+          {
+          if (eptr >= md->end_subject) break;
+          c = *eptr;
+          if ((data[c/8] & (1 << (c&7))) != 0) continue;
+          break;
+          }
+
+        while (eptr >= pp)
+          if (match(eptr--, ecode, offset_top, md, ims, FALSE, eptrb))
+            return TRUE;
+        return FALSE;
+        }
+      }
+    /* Control never gets here */
+
+    /* Match a run of characters */
+
+    case OP_CHARS:
+      {
+      register int length = ecode[1];
+      ecode += 2;
+
+#ifdef DEBUG    /* Sigh. Some compilers never learn. */
+      if (eptr >= md->end_subject)
+        printf("matching subject <null> against pattern ");
+      else
+        {
+        printf("matching subject ");
+        pchars(eptr, length, TRUE, md);
+        printf(" against pattern ");
+        }
+      pchars(ecode, length, FALSE, md);
+      printf("\n");
+#endif
+
+      if (length > md->end_subject - eptr) return FALSE;
+      if ((ims & PCRE_CASELESS) != 0)
+        {
+        while (length-- > 0)
+          if (md->lcc[*ecode++] != md->lcc[*eptr++])
+            return FALSE;
+        }
+      else
+        {
+        while (length-- > 0) if (*ecode++ != *eptr++) return FALSE;
+        }
+      }
+    break;
+
+    /* Match a single character repeatedly; different opcodes share code. */
+
+    case OP_EXACT:
+    min = max = (ecode[1] << 8) + ecode[2];
+    ecode += 3;
+    goto REPEATCHAR;
+
+    case OP_UPTO:
+    case OP_MINUPTO:
+    min = 0;
+    max = (ecode[1] << 8) + ecode[2];
+    minimize = *ecode == OP_MINUPTO;
+    ecode += 3;
+    goto REPEATCHAR;
+
+    case OP_STAR:
+    case OP_MINSTAR:
+    case OP_PLUS:
+    case OP_MINPLUS:
+    case OP_QUERY:
+    case OP_MINQUERY:
+    c = *ecode++ - OP_STAR;
+    minimize = (c & 1) != 0;
+    min = rep_min[c];                 /* Pick up values from tables; */
+    max = rep_max[c];                 /* zero for max => infinity */
+    if (max == 0) max = INT_MAX;
+
+    /* Common code for all repeated single-character matches. We can give
+    up quickly if there are fewer than the minimum number of characters left in
+    the subject. */
+
+    REPEATCHAR:
+    if (min > md->end_subject - eptr) return FALSE;
+    c = *ecode++;
+
+    /* The code is duplicated for the caseless and caseful cases, for speed,
+    since matching characters is likely to be quite common. First, ensure the
+    minimum number of matches are present. If min = max, continue at the same
+    level without recursing. Otherwise, if minimizing, keep trying the rest of
+    the expression and advancing one matching character if failing, up to the
+    maximum. Alternatively, if maximizing, find the maximum number of
+    characters and work backwards. */
+
+    DPRINTF(("matching %c{%d,%d} against subject %.*s\n", c, min, max,
+      max, eptr));
+
+    if ((ims & PCRE_CASELESS) != 0)
+      {
+      c = md->lcc[c];
+      for (i = 1; i <= min; i++)
+        if (c != md->lcc[*eptr++]) return FALSE;
+      if (min == max) continue;
+      if (minimize)
+        {
+        for (i = min;; i++)
+          {
+          if (match(eptr, ecode, offset_top, md, ims, FALSE, eptrb))
+            return TRUE;
+          if (i >= max || eptr >= md->end_subject ||
+              c != md->lcc[*eptr++])
+            return FALSE;
+          }
+        /* Control never gets here */
+        }
+      else
+        {
+        const uschar *pp = eptr;
+        for (i = min; i < max; i++)
+          {
+          if (eptr >= md->end_subject || c != md->lcc[*eptr]) break;
+          eptr++;
+          }
+        while (eptr >= pp)
+          if (match(eptr--, ecode, offset_top, md, ims, FALSE, eptrb))
+            return TRUE;
+        return FALSE;
+        }
+      /* Control never gets here */
+      }
+
+    /* Caseful comparisons */
+
+    else
+      {
+      for (i = 1; i <= min; i++) if (c != *eptr++) return FALSE;
+      if (min == max) continue;
+      if (minimize)
+        {
+        for (i = min;; i++)
+          {
+          if (match(eptr, ecode, offset_top, md, ims, FALSE, eptrb))
+            return TRUE;
+          if (i >= max || eptr >= md->end_subject || c != *eptr++) return FALSE;
+          }
+        /* Control never gets here */
+        }
+      else
+        {
+        const uschar *pp = eptr;
+        for (i = min; i < max; i++)
+          {
+          if (eptr >= md->end_subject || c != *eptr) break;
+          eptr++;
+          }
+        while (eptr >= pp)
+         if (match(eptr--, ecode, offset_top, md, ims, FALSE, eptrb))
+           return TRUE;
+        return FALSE;
+        }
+      }
+    /* Control never gets here */
+
+    /* Match a negated single character */
+
+    case OP_NOT:
+    if (eptr >= md->end_subject) return FALSE;
+    ecode++;
+    if ((ims & PCRE_CASELESS) != 0)
+      {
+      if (md->lcc[*ecode++] == md->lcc[*eptr++]) return FALSE;
+      }
+    else
+      {
+      if (*ecode++ == *eptr++) return FALSE;
+      }
+    break;
+
+    /* Match a negated single character repeatedly. This is almost a repeat of
+    the code for a repeated single character, but I haven't found a nice way of
+    commoning these up that doesn't require a test of the positive/negative
+    option for each character match. Maybe that wouldn't add very much to the
+    time taken, but character matching *is* what this is all about... */
+
+    case OP_NOTEXACT:
+    min = max = (ecode[1] << 8) + ecode[2];
+    ecode += 3;
+    goto REPEATNOTCHAR;
+
+    case OP_NOTUPTO:
+    case OP_NOTMINUPTO:
+    min = 0;
+    max = (ecode[1] << 8) + ecode[2];
+    minimize = *ecode == OP_NOTMINUPTO;
+    ecode += 3;
+    goto REPEATNOTCHAR;
+
+    case OP_NOTSTAR:
+    case OP_NOTMINSTAR:
+    case OP_NOTPLUS:
+    case OP_NOTMINPLUS:
+    case OP_NOTQUERY:
+    case OP_NOTMINQUERY:
+    c = *ecode++ - OP_NOTSTAR;
+    minimize = (c & 1) != 0;
+    min = rep_min[c];                 /* Pick up values from tables; */
+    max = rep_max[c];                 /* zero for max => infinity */
+    if (max == 0) max = INT_MAX;
+
+    /* Common code for all repeated single-character matches. We can give
+    up quickly if there are fewer than the minimum number of characters left in
+    the subject. */
+
+    REPEATNOTCHAR:
+    if (min > md->end_subject - eptr) return FALSE;
+    c = *ecode++;
+
+    /* The code is duplicated for the caseless and caseful cases, for speed,
+    since matching characters is likely to be quite common. First, ensure the
+    minimum number of matches are present. If min = max, continue at the same
+    level without recursing. Otherwise, if minimizing, keep trying the rest of
+    the expression and advancing one matching character if failing, up to the
+    maximum. Alternatively, if maximizing, find the maximum number of
+    characters and work backwards. */
+
+    DPRINTF(("negative matching %c{%d,%d} against subject %.*s\n", c, min, max,
+      max, eptr));
+
+    if ((ims & PCRE_CASELESS) != 0)
+      {
+      c = md->lcc[c];
+      for (i = 1; i <= min; i++)
+        if (c == md->lcc[*eptr++]) return FALSE;
+      if (min == max) continue;
+      if (minimize)
+        {
+        for (i = min;; i++)
+          {
+          if (match(eptr, ecode, offset_top, md, ims, FALSE, eptrb))
+            return TRUE;
+          if (i >= max || eptr >= md->end_subject ||
+              c == md->lcc[*eptr++])
+            return FALSE;
+          }
+        /* Control never gets here */
+        }
+      else
+        {
+        const uschar *pp = eptr;
+        for (i = min; i < max; i++)
+          {
+          if (eptr >= md->end_subject || c == md->lcc[*eptr]) break;
+          eptr++;
+          }
+        while (eptr >= pp)
+          if (match(eptr--, ecode, offset_top, md, ims, FALSE, eptrb))
+            return TRUE;
+        return FALSE;
+        }
+      /* Control never gets here */
+      }
+
+    /* Caseful comparisons */
+
+    else
+      {
+      for (i = 1; i <= min; i++) if (c == *eptr++) return FALSE;
+      if (min == max) continue;
+      if (minimize)
+        {
+        for (i = min;; i++)
+          {
+          if (match(eptr, ecode, offset_top, md, ims, FALSE, eptrb))
+            return TRUE;
+          if (i >= max || eptr >= md->end_subject || c == *eptr++) return FALSE;
+          }
+        /* Control never gets here */
+        }
+      else
+        {
+        const uschar *pp = eptr;
+        for (i = min; i < max; i++)
+          {
+          if (eptr >= md->end_subject || c == *eptr) break;
+          eptr++;
+          }
+        while (eptr >= pp)
+         if (match(eptr--, ecode, offset_top, md, ims, FALSE, eptrb))
+           return TRUE;
+        return FALSE;
+        }
+      }
+    /* Control never gets here */
+
+    /* Match a single character type repeatedly; several different opcodes
+    share code. This is very similar to the code for single characters, but we
+    repeat it in the interests of efficiency. */
+
+    case OP_TYPEEXACT:
+    min = max = (ecode[1] << 8) + ecode[2];
+    minimize = TRUE;
+    ecode += 3;
+    goto REPEATTYPE;
+
+    case OP_TYPEUPTO:
+    case OP_TYPEMINUPTO:
+    min = 0;
+    max = (ecode[1] << 8) + ecode[2];
+    minimize = *ecode == OP_TYPEMINUPTO;
+    ecode += 3;
+    goto REPEATTYPE;
+
+    case OP_TYPESTAR:
+    case OP_TYPEMINSTAR:
+    case OP_TYPEPLUS:
+    case OP_TYPEMINPLUS:
+    case OP_TYPEQUERY:
+    case OP_TYPEMINQUERY:
+    c = *ecode++ - OP_TYPESTAR;
+    minimize = (c & 1) != 0;
+    min = rep_min[c];                 /* Pick up values from tables; */
+    max = rep_max[c];                 /* zero for max => infinity */
+    if (max == 0) max = INT_MAX;
+
+    /* Common code for all repeated single character type matches */
+
+    REPEATTYPE:
+    ctype = *ecode++;      /* Code for the character type */
+
+    /* First, ensure the minimum number of matches are present. Use inline
+    code for maximizing the speed, and do the type test once at the start
+    (i.e. keep it out of the loop). Also test that there are at least the
+    minimum number of characters before we start. */
+
+    if (min > md->end_subject - eptr) return FALSE;
+    if (min > 0) switch(ctype)
+      {
+      case OP_ANY:
+      if ((ims & PCRE_DOTALL) == 0)
+        { for (i = 1; i <= min; i++) if (*eptr++ == '\n') return FALSE; }
+      else eptr += min;
+      break;
+
+      case OP_NOT_DIGIT:
+      for (i = 1; i <= min; i++)
+        if ((md->ctypes[*eptr++] & ctype_digit) != 0) return FALSE;
+      break;
+
+      case OP_DIGIT:
+      for (i = 1; i <= min; i++)
+        if ((md->ctypes[*eptr++] & ctype_digit) == 0) return FALSE;
+      break;
+
+      case OP_NOT_WHITESPACE:
+      for (i = 1; i <= min; i++)
+        if ((md->ctypes[*eptr++] & ctype_space) != 0) return FALSE;
+      break;
+
+      case OP_WHITESPACE:
+      for (i = 1; i <= min; i++)
+        if ((md->ctypes[*eptr++] & ctype_space) == 0) return FALSE;
+      break;
+
+      case OP_NOT_WORDCHAR:
+      for (i = 1; i <= min; i++)
+        if ((md->ctypes[*eptr++] & ctype_word) != 0)
+          return FALSE;
+      break;
+
+      case OP_WORDCHAR:
+      for (i = 1; i <= min; i++)
+        if ((md->ctypes[*eptr++] & ctype_word) == 0)
+          return FALSE;
+      break;
+      }
+
+    /* If min = max, continue at the same level without recursing */
+
+    if (min == max) continue;
+
+    /* If minimizing, we have to test the rest of the pattern before each
+    subsequent match. */
+
+    if (minimize)
+      {
+      for (i = min;; i++)
+        {
+        if (match(eptr, ecode, offset_top, md, ims, FALSE, eptrb)) return TRUE;
+        if (i >= max || eptr >= md->end_subject) return FALSE;
+
+        c = *eptr++;
+        switch(ctype)
+          {
+          case OP_ANY:
+          if ((ims & PCRE_DOTALL) == 0 && c == '\n') return FALSE;
+          break;
+
+          case OP_NOT_DIGIT:
+          if ((md->ctypes[c] & ctype_digit) != 0) return FALSE;
+          break;
+
+          case OP_DIGIT:
+          if ((md->ctypes[c] & ctype_digit) == 0) return FALSE;
+          break;
+
+          case OP_NOT_WHITESPACE:
+          if ((md->ctypes[c] & ctype_space) != 0) return FALSE;
+          break;
+
+          case OP_WHITESPACE:
+          if  ((md->ctypes[c] & ctype_space) == 0) return FALSE;
+          break;
+
+          case OP_NOT_WORDCHAR:
+          if ((md->ctypes[c] & ctype_word) != 0) return FALSE;
+          break;
+
+          case OP_WORDCHAR:
+          if ((md->ctypes[c] & ctype_word) == 0) return FALSE;
+          break;
+          }
+        }
+      /* Control never gets here */
+      }
+
+    /* If maximizing it is worth using inline code for speed, doing the type
+    test once at the start (i.e. keep it out of the loop). */
+
+    else
+      {
+      const uschar *pp = eptr;
+      switch(ctype)
+        {
+        case OP_ANY:
+        if ((ims & PCRE_DOTALL) == 0)
+          {
+          for (i = min; i < max; i++)
+            {
+            if (eptr >= md->end_subject || *eptr == '\n') break;
+            eptr++;
+            }
+          }
+        else
+          {
+          c = max - min;
+          if (c > md->end_subject - eptr) c = md->end_subject - eptr;
+          eptr += c;
+          }
+        break;
+
+        case OP_NOT_DIGIT:
+        for (i = min; i < max; i++)
+          {
+          if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_digit) != 0)
+            break;
+          eptr++;
+          }
+        break;
+
+        case OP_DIGIT:
+        for (i = min; i < max; i++)
+          {
+          if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_digit) == 0)
+            break;
+          eptr++;
+          }
+        break;
+
+        case OP_NOT_WHITESPACE:
+        for (i = min; i < max; i++)
+          {
+          if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_space) != 0)
+            break;
+          eptr++;
+          }
+        break;
+
+        case OP_WHITESPACE:
+        for (i = min; i < max; i++)
+          {
+          if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_space) == 0)
+            break;
+          eptr++;
+          }
+        break;
+
+        case OP_NOT_WORDCHAR:
+        for (i = min; i < max; i++)
+          {
+          if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_word) != 0)
+            break;
+          eptr++;
+          }
+        break;
+
+        case OP_WORDCHAR:
+        for (i = min; i < max; i++)
+          {
+          if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_word) == 0)
+            break;
+          eptr++;
+          }
+        break;
+        }
+
+      while (eptr >= pp)
+        if (match(eptr--, ecode, offset_top, md, ims, FALSE, eptrb))
+          return TRUE;
+      return FALSE;
+      }
+    /* Control never gets here */
+
+    /* There's been some horrible disaster. */
+
+    default:
+    DPRINTF(("Unknown opcode %d\n", *ecode));
+    md->errorcode = PCRE_ERROR_UNKNOWN_NODE;
+    return FALSE;
+    }
+
+  /* Do not stick any code in here without much thought; it is assumed
+  that "continue" in the code above comes out to here to repeat the main
+  loop. */
+
+  }             /* End of main loop */
+/* Control never reaches here */
+}
+
+
+
+
+/*************************************************
+*         Execute a Regular Expression           *
+*************************************************/
+
+/* This function applies a compiled re to a subject string and picks out
+portions of the string if it matches. Two elements in the vector are set for
+each substring: the offsets to the start and end of the substring.
+
+Arguments:
+  external_re     points to the compiled expression
+  external_extra  points to "hints" from pcre_study() or is NULL
+  subject         points to the subject string
+  length          length of subject string (may contain binary zeros)
+  start_offset    where to start in the subject string
+  options         option bits
+  offsets         points to a vector of ints to be filled in with offsets
+  offsetcount     the number of elements in the vector
+
+Returns:          > 0 => success; value is the number of elements filled in
+                  = 0 => success, but offsets is not big enough
+                   -1 => failed to match
+                 < -1 => some kind of unexpected problem
+*/
+
+int
+pcre_exec(const pcre *external_re, const pcre_extra *external_extra,
+  const char *subject, int length, int start_offset, int options, int *offsets,
+  int offsetcount)
+{
+int resetcount, ocount;
+int first_char = -1;
+int req_char = -1;
+int req_char2 = -1;
+unsigned long int ims = 0;
+match_data match_block;
+const uschar *start_bits = NULL;
+const uschar *start_match = (const uschar *)subject + start_offset;
+const uschar *end_subject;
+const uschar *req_char_ptr = start_match - 1;
+const real_pcre *re = (const real_pcre *)external_re;
+const real_pcre_extra *extra = (const real_pcre_extra *)external_extra;
+BOOL using_temporary_offsets = FALSE;
+BOOL anchored = ((re->options | options) & PCRE_ANCHORED) != 0;
+BOOL startline = (re->options & PCRE_STARTLINE) != 0;
+
+if ((options & ~PUBLIC_EXEC_OPTIONS) != 0) return PCRE_ERROR_BADOPTION;
+
+if (re == NULL || subject == NULL ||
+   (offsets == NULL && offsetcount > 0)) return PCRE_ERROR_NULL;
+if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC;
+
+match_block.start_pattern = re->code;
+match_block.start_subject = (const uschar *)subject;
+match_block.end_subject = match_block.start_subject + length;
+end_subject = match_block.end_subject;
+
+match_block.endonly = (re->options & PCRE_DOLLAR_ENDONLY) != 0;
+
+match_block.notbol = (options & PCRE_NOTBOL) != 0;
+match_block.noteol = (options & PCRE_NOTEOL) != 0;
+match_block.notempty = (options & PCRE_NOTEMPTY) != 0;
+
+match_block.errorcode = PCRE_ERROR_NOMATCH;     /* Default error */
+
+match_block.lcc = re->tables + lcc_offset;
+match_block.ctypes = re->tables + ctypes_offset;
+
+/* The ims options can vary during the matching as a result of the presence
+of (?ims) items in the pattern. They are kept in a local variable so that
+restoring at the exit of a group is easy. */
+
+ims = re->options & (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL);
+
+/* If the expression has got more back references than the offsets supplied can
+hold, we get a temporary bit of working store to use during the matching.
+Otherwise, we can use the vector supplied, rounding down its size to a multiple
+of 3. */
+
+ocount = offsetcount - (offsetcount % 3);
+
+if (re->top_backref > 0 && re->top_backref >= ocount/3)
+  {
+  ocount = re->top_backref * 3 + 3;
+  match_block.offset_vector = (int *)(pcre_malloc)(ocount * sizeof(int));
+  if (match_block.offset_vector == NULL) return PCRE_ERROR_NOMEMORY;
+  using_temporary_offsets = TRUE;
+  DPRINTF(("Got memory to hold back references\n"));
+  }
+else match_block.offset_vector = offsets;
+
+match_block.offset_end = ocount;
+match_block.offset_max = (2*ocount)/3;
+match_block.offset_overflow = FALSE;
+
+/* Compute the minimum number of offsets that we need to reset each time. Doing
+this makes a huge difference to execution time when there aren't many brackets
+in the pattern. */
+
+resetcount = 2 + re->top_bracket * 2;
+if (resetcount > offsetcount) resetcount = ocount;
+
+/* Reset the working variable associated with each extraction. These should
+never be used unless previously set, but they get saved and restored, and so we
+initialize them to avoid reading uninitialized locations. */
+
+if (match_block.offset_vector != NULL)
+  {
+  register int *iptr = match_block.offset_vector + ocount;
+  register int *iend = iptr - resetcount/2 + 1;
+  while (--iptr >= iend) *iptr = -1;
+  }
+
+/* Set up the first character to match, if available. The first_char value is
+never set for an anchored regular expression, but the anchoring may be forced
+at run time, so we have to test for anchoring. The first char may be unset for
+an unanchored pattern, of course. If there's no first char and the pattern was
+studied, there may be a bitmap of possible first characters. */
+
+if (!anchored)
+  {
+  if ((re->options & PCRE_FIRSTSET) != 0)
+    {
+    first_char = re->first_char;
+    if ((ims & PCRE_CASELESS) != 0) first_char = match_block.lcc[first_char];
+    }
+  else
+    if (!startline && extra != NULL &&
+      (extra->options & PCRE_STUDY_MAPPED) != 0)
+        start_bits = extra->start_bits;
+  }
+
+/* For anchored or unanchored matches, there may be a "last known required
+character" set. If the PCRE_CASELESS is set, implying that the match starts
+caselessly, or if there are any changes of this flag within the regex, set up
+both cases of the character. Otherwise set the two values the same, which will
+avoid duplicate testing (which takes significant time). This covers the vast
+majority of cases. It will be suboptimal when the case flag changes in a regex
+and the required character in fact is caseful. */
+
+if ((re->options & PCRE_REQCHSET) != 0)
+  {
+  req_char = re->req_char;
+  req_char2 = ((re->options & (PCRE_CASELESS | PCRE_ICHANGED)) != 0)?
+    (re->tables + fcc_offset)[req_char] : req_char;
+  }
+
+/* Loop for handling unanchored repeated matching attempts; for anchored regexs
+the loop runs just once. */
+
+do
+  {
+  int rc;
+  register int *iptr = match_block.offset_vector;
+  register int *iend = iptr + resetcount;
+
+  /* Reset the maximum number of extractions we might see. */
+
+  while (iptr < iend) *iptr++ = -1;
+
+  /* Advance to a unique first char if possible */
+
+  if (first_char >= 0)
+    {
+    if ((ims & PCRE_CASELESS) != 0)
+      while (start_match < end_subject &&
+             match_block.lcc[*start_match] != first_char)
+        start_match++;
+    else
+      while (start_match < end_subject && *start_match != first_char)
+        start_match++;
+    }
+
+  /* Or to just after \n for a multiline match if possible */
+
+  else if (startline)
+    {
+    if (start_match > match_block.start_subject + start_offset)
+      {
+      while (start_match < end_subject && start_match[-1] != '\n')
+        start_match++;
+      }
+    }
+
+  /* Or to a non-unique first char after study */
+
+  else if (start_bits != NULL)
+    {
+    while (start_match < end_subject)
+      {
+      register int c = *start_match;
+      if ((start_bits[c/8] & (1 << (c&7))) == 0) start_match++; else break;
+      }
+    }
+
+#ifdef DEBUG  /* Sigh. Some compilers never learn. */
+  printf(">>>> Match against: ");
+  pchars(start_match, end_subject - start_match, TRUE, &match_block);
+  printf("\n");
+#endif
+
+  /* If req_char is set, we know that that character must appear in the subject
+  for the match to succeed. If the first character is set, req_char must be
+  later in the subject; otherwise the test starts at the match point. This
+  optimization can save a huge amount of backtracking in patterns with nested
+  unlimited repeats that aren't going to match. We don't know what the state of
+  case matching may be when this character is hit, so test for it in both its
+  cases if necessary. However, the different cased versions will not be set up
+  unless PCRE_CASELESS was given or the casing state changes within the regex.
+  Writing separate code makes it go faster, as does using an autoincrement and
+  backing off on a match. */
+
+  if (req_char >= 0)
+    {
+    register const uschar *p = start_match + ((first_char >= 0)? 1 : 0);
+
+    /* We don't need to repeat the search if we haven't yet reached the
+    place we found it at last time. */
+
+    if (p > req_char_ptr)
+      {
+      /* Do a single test if no case difference is set up */
+
+      if (req_char == req_char2)
+        {
+        while (p < end_subject)
+          {
+          if (*p++ == req_char) { p--; break; }
+          }
+        }
+
+      /* Otherwise test for either case */
+
+      else
+        {
+        while (p < end_subject)
+          {
+          register int pp = *p++;
+          if (pp == req_char || pp == req_char2) { p--; break; }
+          }
+        }
+
+      /* If we can't find the required character, break the matching loop */
+
+      if (p >= end_subject) break;
+
+      /* If we have found the required character, save the point where we
+      found it, so that we don't search again next time round the loop if
+      the start hasn't passed this character yet. */
+
+      req_char_ptr = p;
+      }
+    }
+
+  /* When a match occurs, substrings will be set for all internal extractions;
+  we just need to set up the whole thing as substring 0 before returning. If
+  there were too many extractions, set the return code to zero. In the case
+  where we had to get some local store to hold offsets for backreferences, copy
+  those back references that we can. In this case there need not be overflow
+  if certain parts of the pattern were not used. */
+
+  match_block.start_match = start_match;
+  if (!match(start_match, re->code, 2, &match_block, ims, FALSE, start_match))
+    continue;
+
+  /* Copy the offset information from temporary store if necessary */
+
+  if (using_temporary_offsets)
+    {
+    if (offsetcount >= 4)
+      {
+      memcpy(offsets + 2, match_block.offset_vector + 2,
+        (offsetcount - 2) * sizeof(int));
+      DPRINTF(("Copied offsets from temporary memory\n"));
+      }
+    if (match_block.end_offset_top > offsetcount)
+      match_block.offset_overflow = TRUE;
+
+    DPRINTF(("Freeing temporary memory\n"));
+    (pcre_free)(match_block.offset_vector);
+    }
+
+  rc = match_block.offset_overflow? 0 : match_block.end_offset_top/2;
+
+  if (match_block.offset_end < 2) rc = 0; else
+    {
+    offsets[0] = start_match - match_block.start_subject;
+    offsets[1] = match_block.end_match_ptr - match_block.start_subject;
+    }
+
+  DPRINTF((">>>> returning %d\n", rc));
+  return rc;
+  }
+
+/* This "while" is the end of the "do" above */
+
+while (!anchored &&
+       match_block.errorcode == PCRE_ERROR_NOMATCH &&
+       start_match++ < end_subject);
+
+if (using_temporary_offsets)
+  {
+  DPRINTF(("Freeing temporary memory\n"));
+  (pcre_free)(match_block.offset_vector);
+  }
+
+DPRINTF((">>>> returning %d\n", match_block.errorcode));
+
+return match_block.errorcode;
+}
+
+/* End of pcre.c */
diff --git a/srclib/pcre/pcre.def b/srclib/pcre/pcre.def
new file mode 100644
index 0000000000..0e8cf3f442
--- /dev/null
+++ b/srclib/pcre/pcre.def
@@ -0,0 +1,19 @@
+EXPORTS
+
+pcre_malloc DATA
+pcre_free DATA
+
+pcre_compile
+pcre_copy_substring
+pcre_exec
+pcre_get_substring
+pcre_get_substring_list
+pcre_info
+pcre_maketables
+pcre_study
+pcre_version
+
+regcomp
+regexec
+regerror
+regfree
diff --git a/srclib/pcre/pcre.in b/srclib/pcre/pcre.in
new file mode 100644
index 0000000000..74b0cfc579
--- /dev/null
+++ b/srclib/pcre/pcre.in
@@ -0,0 +1,105 @@
+/*************************************************
+*       Perl-Compatible Regular Expressions      *
+*************************************************/
+
+/* Copyright (c) 1997-2000 University of Cambridge */
+
+#ifndef _PCRE_H
+#define _PCRE_H
+
+#define PCRE_MAJOR @PCRE_MAJOR@
+#define PCRE_MINOR @PCRE_MINOR@
+#define PCRE_DATE  @PCRE_DATE@
+
+/* Win32 uses DLL by default */
+
+#ifdef _WIN32
+# ifdef STATIC
+#  define PCRE_DL_IMPORT
+# else
+#  define PCRE_DL_IMPORT __declspec(dllimport)
+# endif
+#else
+# define PCRE_DL_IMPORT
+#endif
+
+/* Have to include stdlib.h in order to ensure that size_t is defined;
+it is needed here for malloc. */
+
+#include <sys/types.h>
+#include <stdlib.h>
+
+/* Allow for C++ users */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Options */
+
+#define PCRE_CASELESS        0x0001
+#define PCRE_MULTILINE       0x0002
+#define PCRE_DOTALL          0x0004
+#define PCRE_EXTENDED        0x0008
+#define PCRE_ANCHORED        0x0010
+#define PCRE_DOLLAR_ENDONLY  0x0020
+#define PCRE_EXTRA           0x0040
+#define PCRE_NOTBOL          0x0080
+#define PCRE_NOTEOL          0x0100
+#define PCRE_UNGREEDY        0x0200
+#define PCRE_NOTEMPTY        0x0400
+
+/* Exec-time and get-time error codes */
+
+#define PCRE_ERROR_NOMATCH        (-1)
+#define PCRE_ERROR_NULL           (-2)
+#define PCRE_ERROR_BADOPTION      (-3)
+#define PCRE_ERROR_BADMAGIC       (-4)
+#define PCRE_ERROR_UNKNOWN_NODE   (-5)
+#define PCRE_ERROR_NOMEMORY       (-6)
+#define PCRE_ERROR_NOSUBSTRING    (-7)
+
+/* Request types for pcre_fullinfo() */
+
+#define PCRE_INFO_OPTIONS         0
+#define PCRE_INFO_SIZE            1
+#define PCRE_INFO_CAPTURECOUNT    2
+#define PCRE_INFO_BACKREFMAX      3
+#define PCRE_INFO_FIRSTCHAR       4
+#define PCRE_INFO_FIRSTTABLE      5
+#define PCRE_INFO_LASTLITERAL     6
+
+/* Types */
+
+typedef void pcre;
+typedef void pcre_extra;
+
+/* Store get and free functions. These can be set to alternative malloc/free
+functions if required. Some magic is required for Win32 DLL; it is null on
+other OS. */
+
+PCRE_DL_IMPORT extern void *(*pcre_malloc)(size_t);
+PCRE_DL_IMPORT extern void  (*pcre_free)(void *);
+
+#undef PCRE_DL_IMPORT
+
+/* Functions */
+
+extern pcre *pcre_compile(const char *, int, const char **, int *,
+  const unsigned char *);
+extern int pcre_copy_substring(const char *, int *, int, int, char *, int);
+extern int pcre_exec(const pcre *, const pcre_extra *, const char *,
+  int, int, int, int *, int);
+extern int pcre_get_substring(const char *, int *, int, int, const char **);
+extern int pcre_get_substring_list(const char *, int *, int, const char ***);
+extern int pcre_info(const pcre *, int *, int *);
+extern int pcre_fullinfo(const pcre *, const pcre_extra *, int, void *);
+extern unsigned const char *pcre_maketables(void);
+extern pcre_extra *pcre_study(const pcre *, int, const char **);
+extern const char *pcre_version(void);
+
+#ifdef __cplusplus
+}  /* extern "C" */
+#endif
+
+#endif /* End of pcre.h */
diff --git a/srclib/pcre/pcreposix.c b/srclib/pcre/pcreposix.c
new file mode 100644
index 0000000000..7c66ccec89
--- /dev/null
+++ b/srclib/pcre/pcreposix.c
@@ -0,0 +1,276 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+/*
+This is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language. See
+the file Tech.Notes for some information on the internals.
+
+This module is a wrapper that provides a POSIX API to the underlying PCRE
+functions.
+
+Written by: Philip Hazel <ph10@cam.ac.uk>
+
+           Copyright (c) 1997-2000 University of Cambridge
+
+-----------------------------------------------------------------------------
+Permission is granted to anyone to use this software for any purpose on any
+computer system, and to redistribute it freely, subject to the following
+restrictions:
+
+1. This software is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+2. The origin of this software must not be misrepresented, either by
+   explicit claim or by omission.
+
+3. Altered versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+
+4. If PCRE is embedded in any software that is released under the GNU
+   General Purpose Licence (GPL), then the terms of that licence shall
+   supersede any condition above with which it is incompatible.
+-----------------------------------------------------------------------------
+*/
+
+#include "internal.h"
+#include "pcreposix.h"
+#include "stdlib.h"
+
+
+
+/* Corresponding tables of PCRE error messages and POSIX error codes. */
+
+static const char *estring[] = {
+  ERR1,  ERR2,  ERR3,  ERR4,  ERR5,  ERR6,  ERR7,  ERR8,  ERR9,  ERR10,
+  ERR11, ERR12, ERR13, ERR14, ERR15, ERR16, ERR17, ERR18, ERR19, ERR20,
+  ERR21, ERR22, ERR23, ERR24, ERR25, ERR26, ERR27, ERR29, ERR29, ERR30,
+  ERR31 };
+
+static int eint[] = {
+  REG_EESCAPE, /* "\\ at end of pattern" */
+  REG_EESCAPE, /* "\\c at end of pattern" */
+  REG_EESCAPE, /* "unrecognized character follows \\" */
+  REG_BADBR,   /* "numbers out of order in {} quantifier" */
+  REG_BADBR,   /* "number too big in {} quantifier" */
+  REG_EBRACK,  /* "missing terminating ] for character class" */
+  REG_ECTYPE,  /* "invalid escape sequence in character class" */
+  REG_ERANGE,  /* "range out of order in character class" */
+  REG_BADRPT,  /* "nothing to repeat" */
+  REG_BADRPT,  /* "operand of unlimited repeat could match the empty string" */
+  REG_ASSERT,  /* "internal error: unexpected repeat" */
+  REG_BADPAT,  /* "unrecognized character after (?" */
+  REG_ESIZE,   /* "too many capturing parenthesized sub-patterns" */
+  REG_EPAREN,  /* "missing )" */
+  REG_ESUBREG, /* "back reference to non-existent subpattern" */
+  REG_INVARG,  /* "erroffset passed as NULL" */
+  REG_INVARG,  /* "unknown option bit(s) set" */
+  REG_EPAREN,  /* "missing ) after comment" */
+  REG_ESIZE,   /* "too many sets of parentheses" */
+  REG_ESIZE,   /* "regular expression too large" */
+  REG_ESPACE,  /* "failed to get memory" */
+  REG_EPAREN,  /* "unmatched brackets" */
+  REG_ASSERT,  /* "internal error: code overflow" */
+  REG_BADPAT,  /* "unrecognized character after (?<" */
+  REG_BADPAT,  /* "lookbehind assertion is not fixed length" */
+  REG_BADPAT,  /* "malformed number after (?(" */
+  REG_BADPAT,  /* "conditional group containe more than two branches" */
+  REG_BADPAT,  /* "assertion expected after (?(" */
+  REG_BADPAT,  /* "(?p must be followed by )" */
+  REG_ECTYPE,  /* "unknown POSIX class name" */
+  REG_BADPAT   /* "POSIX collating elements are not supported" */
+};
+
+/* Table of texts corresponding to POSIX error codes */
+
+static const char *pstring[] = {
+  "",                                /* Dummy for value 0 */
+  "internal error",                  /* REG_ASSERT */
+  "invalid repeat counts in {}",     /* BADBR      */
+  "pattern error",                   /* BADPAT     */
+  "? * + invalid",                   /* BADRPT     */
+  "unbalanced {}",                   /* EBRACE     */
+  "unbalanced []",                   /* EBRACK     */
+  "collation error - not relevant",  /* ECOLLATE   */
+  "bad class",                       /* ECTYPE     */
+  "bad escape sequence",             /* EESCAPE    */
+  "empty expression",                /* EMPTY      */
+  "unbalanced ()",                   /* EPAREN     */
+  "bad range inside []",             /* ERANGE     */
+  "expression too big",              /* ESIZE      */
+  "failed to get memory",            /* ESPACE     */
+  "bad back reference",              /* ESUBREG    */
+  "bad argument",                    /* INVARG     */
+  "match failed"                     /* NOMATCH    */
+};
+
+
+
+
+/*************************************************
+*          Translate PCRE text code to int       *
+*************************************************/
+
+/* PCRE compile-time errors are given as strings defined as macros. We can just
+look them up in a table to turn them into POSIX-style error codes. */
+
+static int
+pcre_posix_error_code(const char *s)
+{
+size_t i;
+for (i = 0; i < sizeof(estring)/sizeof(char *); i++)
+  if (strcmp(s, estring[i]) == 0) return eint[i];
+return REG_ASSERT;
+}
+
+
+
+/*************************************************
+*          Translate error code to string        *
+*************************************************/
+
+size_t
+regerror(int errcode, const regex_t *preg, char *errbuf, size_t errbuf_size)
+{
+const char *message, *addmessage;
+size_t length, addlength;
+
+message = (errcode >= (int)(sizeof(pstring)/sizeof(char *)))?
+  "unknown error code" : pstring[errcode];
+length = strlen(message) + 1;
+
+addmessage = " at offset ";
+addlength = (preg != NULL && (int)preg->re_erroffset != -1)?
+  strlen(addmessage) + 6 : 0;
+
+if (errbuf_size > 0)
+  {
+  if (addlength > 0 && errbuf_size >= length + addlength)
+    sprintf(errbuf, "%s%s%-6d", message, addmessage, (int)preg->re_erroffset);
+  else
+    {
+    strncpy(errbuf, message, errbuf_size - 1);
+    errbuf[errbuf_size-1] = 0;
+    }
+  }
+
+return length + addlength;
+}
+
+
+
+
+/*************************************************
+*           Free store held by a regex           *
+*************************************************/
+
+void
+regfree(regex_t *preg)
+{
+(pcre_free)(preg->re_pcre);
+}
+
+
+
+
+/*************************************************
+*            Compile a regular expression        *
+*************************************************/
+
+/*
+Arguments:
+  preg        points to a structure for recording the compiled expression
+  pattern     the pattern to compile
+  cflags      compilation flags
+
+Returns:      0 on success
+              various non-zero codes on failure
+*/
+
+int
+regcomp(regex_t *preg, const char *pattern, int cflags)
+{
+const char *errorptr;
+int erroffset;
+int options = 0;
+
+if ((cflags & REG_ICASE) != 0) options |= PCRE_CASELESS;
+if ((cflags & REG_NEWLINE) != 0) options |= PCRE_MULTILINE;
+
+preg->re_pcre = pcre_compile(pattern, options, &errorptr, &erroffset, NULL);
+preg->re_erroffset = erroffset;
+
+if (preg->re_pcre == NULL) return pcre_posix_error_code(errorptr);
+
+preg->re_nsub = pcre_info(preg->re_pcre, NULL, NULL);
+return 0;
+}
+
+
+
+
+/*************************************************
+*              Match a regular expression        *
+*************************************************/
+
+/* Unfortunately, PCRE requires 3 ints of working space for each captured
+substring, so we have to get and release working store instead of just using
+the POSIX structures as was done in earlier releases when PCRE needed only 2
+ints. */
+
+int
+regexec(regex_t *preg, const char *string, size_t nmatch,
+  regmatch_t pmatch[], int eflags)
+{
+int rc;
+int options = 0;
+int *ovector = NULL;
+
+if ((eflags & REG_NOTBOL) != 0) options |= PCRE_NOTBOL;
+if ((eflags & REG_NOTEOL) != 0) options |= PCRE_NOTEOL;
+
+preg->re_erroffset = (size_t)(-1);   /* Only has meaning after compile */
+
+if (nmatch > 0)
+  {
+  ovector = (int *)malloc(sizeof(int) * nmatch * 3);
+  if (ovector == NULL) return REG_ESPACE;
+  }
+
+rc = pcre_exec(preg->re_pcre, NULL, string, (int)strlen(string), 0, options,
+  ovector, nmatch * 3);
+
+if (rc == 0) rc = nmatch;    /* All captured slots were filled in */
+
+if (rc >= 0)
+  {
+  size_t i;
+  for (i = 0; i < rc; i++)
+    {
+    pmatch[i].rm_so = ovector[i*2];
+    pmatch[i].rm_eo = ovector[i*2+1];
+    }
+  if (ovector != NULL) free(ovector);
+  for (; i < nmatch; i++) pmatch[i].rm_so = pmatch[i].rm_eo = -1;
+  return 0;
+  }
+
+else
+  {
+  if (ovector != NULL) free(ovector);
+  switch(rc)
+    {
+    case PCRE_ERROR_NOMATCH: return REG_NOMATCH;
+    case PCRE_ERROR_NULL: return REG_INVARG;
+    case PCRE_ERROR_BADOPTION: return REG_INVARG;
+    case PCRE_ERROR_BADMAGIC: return REG_INVARG;
+    case PCRE_ERROR_UNKNOWN_NODE: return REG_ASSERT;
+    case PCRE_ERROR_NOMEMORY: return REG_ESPACE;
+    default: return REG_ASSERT;
+    }
+  }
+}
+
+/* End of pcreposix.c */
diff --git a/srclib/pcre/pcreposix.h b/srclib/pcre/pcreposix.h
new file mode 100644
index 0000000000..7660acbd55
--- /dev/null
+++ b/srclib/pcre/pcreposix.h
@@ -0,0 +1,88 @@
+/*************************************************
+*       Perl-Compatible Regular Expressions      *
+*************************************************/
+
+/* Copyright (c) 1997-2000 University of Cambridge */
+
+#ifndef _PCREPOSIX_H
+#define _PCREPOSIX_H
+
+/* This is the header for the POSIX wrapper interface to the PCRE Perl-
+Compatible Regular Expression library. It defines the things POSIX says should
+be there. I hope. */
+
+/* Have to include stdlib.h in order to ensure that size_t is defined. */
+
+#include <stdlib.h>
+
+/* Allow for C++ users */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Options defined by POSIX. */
+
+#define REG_ICASE     0x01
+#define REG_NEWLINE   0x02
+#define REG_NOTBOL    0x04
+#define REG_NOTEOL    0x08
+
+/* These are not used by PCRE, but by defining them we make it easier
+to slot PCRE into existing programs that make POSIX calls. */
+
+#define REG_EXTENDED  0
+#define REG_NOSUB     0
+
+/* Error values. Not all these are relevant or used by the wrapper. */
+
+enum {
+  REG_ASSERT = 1,  /* internal error ? */
+  REG_BADBR,       /* invalid repeat counts in {} */
+  REG_BADPAT,      /* pattern error */
+  REG_BADRPT,      /* ? * + invalid */
+  REG_EBRACE,      /* unbalanced {} */
+  REG_EBRACK,      /* unbalanced [] */
+  REG_ECOLLATE,    /* collation error - not relevant */
+  REG_ECTYPE,      /* bad class */
+  REG_EESCAPE,     /* bad escape sequence */
+  REG_EMPTY,       /* empty expression */
+  REG_EPAREN,      /* unbalanced () */
+  REG_ERANGE,      /* bad range inside [] */
+  REG_ESIZE,       /* expression too big */
+  REG_ESPACE,      /* failed to get memory */
+  REG_ESUBREG,     /* bad back reference */
+  REG_INVARG,      /* bad argument */
+  REG_NOMATCH      /* match failed */
+};
+
+
+/* The structure representing a compiled regular expression. */
+
+typedef struct {
+  void *re_pcre;
+  size_t re_nsub;
+  size_t re_erroffset;
+} regex_t;
+
+/* The structure in which a captured offset is returned. */
+
+typedef int regoff_t;
+
+typedef struct {
+  regoff_t rm_so;
+  regoff_t rm_eo;
+} regmatch_t;
+
+/* The functions */
+
+extern int regcomp(regex_t *, const char *, int);
+extern int regexec(regex_t *, const char *, size_t, regmatch_t *, int);
+extern size_t regerror(int, const regex_t *, char *, size_t);
+extern void regfree(regex_t *);
+
+#ifdef __cplusplus
+}   /* extern "C" */
+#endif
+
+#endif /* End of pcreposix.h */
diff --git a/srclib/pcre/pcretest.c b/srclib/pcre/pcretest.c
new file mode 100644
index 0000000000..85569fbeb7
--- /dev/null
+++ b/srclib/pcre/pcretest.c
@@ -0,0 +1,1071 @@
+/*************************************************
+*             PCRE testing program               *
+*************************************************/
+
+#include <ctype.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <time.h>
+#include <locale.h>
+
+/* Use the internal info for displaying the results of pcre_study(). */
+
+#include "internal.h"
+
+/* It is possible to compile this test program without including support for
+testing the POSIX interface, though this is not available via the standard
+Makefile. */
+
+#if !defined NOPOSIX
+#include "pcreposix.h"
+#endif
+
+#ifndef CLOCKS_PER_SEC
+#ifdef CLK_TCK
+#define CLOCKS_PER_SEC CLK_TCK
+#else
+#define CLOCKS_PER_SEC 100
+#endif
+#endif
+
+#define LOOPREPEAT 20000
+
+
+static FILE *outfile;
+static int log_store = 0;
+static size_t gotten_store;
+
+
+
+/* Debugging function to print the internal form of the regex. This is the same
+code as contained in pcre.c under the DEBUG macro. */
+
+static const char *OP_names[] = {
+  "End", "\\A", "\\B", "\\b", "\\D", "\\d",
+  "\\S", "\\s", "\\W", "\\w", "\\Z", "\\z",
+  "Opt", "^", "$", "Any", "chars", "not",
+  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",
+  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",
+  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",
+  "*", "*?", "+", "+?", "?", "??", "{", "{",
+  "class", "Ref", "Recurse",
+  "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not",
+  "AssertB", "AssertB not", "Reverse", "Once", "Cond", "Cref",
+  "Brazero", "Braminzero", "Bra"
+};
+
+
+static void print_internals(pcre *re)
+{
+unsigned char *code = ((real_pcre *)re)->code;
+
+fprintf(outfile, "------------------------------------------------------------------\n");
+
+for(;;)
+  {
+  int c;
+  int charlength;
+
+  fprintf(outfile, "%3d ", (int)(code - ((real_pcre *)re)->code));
+
+  if (*code >= OP_BRA)
+    {
+    fprintf(outfile, "%3d Bra %d", (code[1] << 8) + code[2], *code - OP_BRA);
+    code += 2;
+    }
+
+  else switch(*code)
+    {
+    case OP_END:
+    fprintf(outfile, "    %s\n", OP_names[*code]);
+    fprintf(outfile, "------------------------------------------------------------------\n");
+    return;
+
+    case OP_OPT:
+    fprintf(outfile, " %.2x %s", code[1], OP_names[*code]);
+    code++;
+    break;
+
+    case OP_COND:
+    fprintf(outfile, "%3d Cond", (code[1] << 8) + code[2]);
+    code += 2;
+    break;
+
+    case OP_CREF:
+    fprintf(outfile, " %.2d %s", code[1], OP_names[*code]);
+    code++;
+    break;
+
+    case OP_CHARS:
+    charlength = *(++code);
+    fprintf(outfile, "%3d ", charlength);
+    while (charlength-- > 0)
+      if (isprint(c = *(++code))) fprintf(outfile, "%c", c);
+        else fprintf(outfile, "\\x%02x", c);
+    break;
+
+    case OP_KETRMAX:
+    case OP_KETRMIN:
+    case OP_ALT:
+    case OP_KET:
+    case OP_ASSERT:
+    case OP_ASSERT_NOT:
+    case OP_ASSERTBACK:
+    case OP_ASSERTBACK_NOT:
+    case OP_ONCE:
+    fprintf(outfile, "%3d %s", (code[1] << 8) + code[2], OP_names[*code]);
+    code += 2;
+    break;
+
+    case OP_REVERSE:
+    fprintf(outfile, "%3d %s", (code[1] << 8) + code[2], OP_names[*code]);
+    code += 2;
+    break;
+
+    case OP_STAR:
+    case OP_MINSTAR:
+    case OP_PLUS:
+    case OP_MINPLUS:
+    case OP_QUERY:
+    case OP_MINQUERY:
+    case OP_TYPESTAR:
+    case OP_TYPEMINSTAR:
+    case OP_TYPEPLUS:
+    case OP_TYPEMINPLUS:
+    case OP_TYPEQUERY:
+    case OP_TYPEMINQUERY:
+    if (*code >= OP_TYPESTAR)
+      fprintf(outfile, "    %s", OP_names[code[1]]);
+    else if (isprint(c = code[1])) fprintf(outfile, "    %c", c);
+      else fprintf(outfile, "    \\x%02x", c);
+    fprintf(outfile, "%s", OP_names[*code++]);
+    break;
+
+    case OP_EXACT:
+    case OP_UPTO:
+    case OP_MINUPTO:
+    if (isprint(c = code[3])) fprintf(outfile, "    %c{", c);
+      else fprintf(outfile, "    \\x%02x{", c);
+    if (*code != OP_EXACT) fprintf(outfile, ",");
+    fprintf(outfile, "%d}", (code[1] << 8) + code[2]);
+    if (*code == OP_MINUPTO) fprintf(outfile, "?");
+    code += 3;
+    break;
+
+    case OP_TYPEEXACT:
+    case OP_TYPEUPTO:
+    case OP_TYPEMINUPTO:
+    fprintf(outfile, "    %s{", OP_names[code[3]]);
+    if (*code != OP_TYPEEXACT) fprintf(outfile, "0,");
+    fprintf(outfile, "%d}", (code[1] << 8) + code[2]);
+    if (*code == OP_TYPEMINUPTO) fprintf(outfile, "?");
+    code += 3;
+    break;
+
+    case OP_NOT:
+    if (isprint(c = *(++code))) fprintf(outfile, "    [^%c]", c);
+      else fprintf(outfile, "    [^\\x%02x]", c);
+    break;
+
+    case OP_NOTSTAR:
+    case OP_NOTMINSTAR:
+    case OP_NOTPLUS:
+    case OP_NOTMINPLUS:
+    case OP_NOTQUERY:
+    case OP_NOTMINQUERY:
+    if (isprint(c = code[1])) fprintf(outfile, "    [^%c]", c);
+      else fprintf(outfile, "    [^\\x%02x]", c);
+    fprintf(outfile, "%s", OP_names[*code++]);
+    break;
+
+    case OP_NOTEXACT:
+    case OP_NOTUPTO:
+    case OP_NOTMINUPTO:
+    if (isprint(c = code[3])) fprintf(outfile, "    [^%c]{", c);
+      else fprintf(outfile, "    [^\\x%02x]{", c);
+    if (*code != OP_NOTEXACT) fprintf(outfile, ",");
+    fprintf(outfile, "%d}", (code[1] << 8) + code[2]);
+    if (*code == OP_NOTMINUPTO) fprintf(outfile, "?");
+    code += 3;
+    break;
+
+    case OP_REF:
+    fprintf(outfile, "    \\%d", *(++code));
+    code++;
+    goto CLASS_REF_REPEAT;
+
+    case OP_CLASS:
+      {
+      int i, min, max;
+      code++;
+      fprintf(outfile, "    [");
+
+      for (i = 0; i < 256; i++)
+        {
+        if ((code[i/8] & (1 << (i&7))) != 0)
+          {
+          int j;
+          for (j = i+1; j < 256; j++)
+            if ((code[j/8] & (1 << (j&7))) == 0) break;
+          if (i == '-' || i == ']') fprintf(outfile, "\\");
+          if (isprint(i)) fprintf(outfile, "%c", i); else fprintf(outfile, "\\x%02x", i);
+          if (--j > i)
+            {
+            fprintf(outfile, "-");
+            if (j == '-' || j == ']') fprintf(outfile, "\\");
+            if (isprint(j)) fprintf(outfile, "%c", j); else fprintf(outfile, "\\x%02x", j);
+            }
+          i = j;
+          }
+        }
+      fprintf(outfile, "]");
+      code += 32;
+
+      CLASS_REF_REPEAT:
+
+      switch(*code)
+        {
+        case OP_CRSTAR:
+        case OP_CRMINSTAR:
+        case OP_CRPLUS:
+        case OP_CRMINPLUS:
+        case OP_CRQUERY:
+        case OP_CRMINQUERY:
+        fprintf(outfile, "%s", OP_names[*code]);
+        break;
+
+        case OP_CRRANGE:
+        case OP_CRMINRANGE:
+        min = (code[1] << 8) + code[2];
+        max = (code[3] << 8) + code[4];
+        if (max == 0) fprintf(outfile, "{%d,}", min);
+        else fprintf(outfile, "{%d,%d}", min, max);
+        if (*code == OP_CRMINRANGE) fprintf(outfile, "?");
+        code += 4;
+        break;
+
+        default:
+        code--;
+        }
+      }
+    break;
+
+    /* Anything else is just a one-node item */
+
+    default:
+    fprintf(outfile, "    %s", OP_names[*code]);
+    break;
+    }
+
+  code++;
+  fprintf(outfile, "\n");
+  }
+}
+
+
+
+/* Character string printing function. */
+
+static void pchars(unsigned char *p, int length)
+{
+int c;
+while (length-- > 0)
+  if (isprint(c = *(p++))) fprintf(outfile, "%c", c);
+    else fprintf(outfile, "\\x%02x", c);
+}
+
+
+
+/* Alternative malloc function, to test functionality and show the size of the
+compiled re. */
+
+static void *new_malloc(size_t size)
+{
+gotten_store = size;
+if (log_store)
+  fprintf(outfile, "Memory allocation (code space): %d\n",
+    (int)((int)size - offsetof(real_pcre, code[0])));
+return malloc(size);
+}
+
+
+
+
+/* Get one piece of information from the pcre_fullinfo() function */
+
+static void new_info(pcre *re, pcre_extra *study, int option, void *ptr)
+{
+int rc;
+if ((rc = pcre_fullinfo(re, study, option, ptr)) < 0)
+  fprintf(outfile, "Error %d from pcre_fullinfo(%d)\n", rc, option);
+}
+
+
+
+
+/* Read lines from named file or stdin and write to named file or stdout; lines
+consist of a regular expression, in delimiters and optionally followed by
+options, followed by a set of test data, terminated by an empty line. */
+
+int main(int argc, char **argv)
+{
+FILE *infile = stdin;
+int options = 0;
+int study_options = 0;
+int op = 1;
+int timeit = 0;
+int showinfo = 0;
+int showstore = 0;
+int posix = 0;
+int debug = 0;
+int done = 0;
+unsigned char buffer[30000];
+unsigned char dbuffer[1024];
+
+/* Static so that new_malloc can use it. */
+
+outfile = stdout;
+
+/* Scan options */
+
+while (argc > 1 && argv[op][0] == '-')
+  {
+  if (strcmp(argv[op], "-s") == 0 || strcmp(argv[op], "-m") == 0)
+    showstore = 1;
+  else if (strcmp(argv[op], "-t") == 0) timeit = 1;
+  else if (strcmp(argv[op], "-i") == 0) showinfo = 1;
+  else if (strcmp(argv[op], "-d") == 0) showinfo = debug = 1;
+  else if (strcmp(argv[op], "-p") == 0) posix = 1;
+  else
+    {
+    printf("*** Unknown option %s\n", argv[op]);
+    printf("Usage: pcretest [-d] [-i] [-p] [-s] [-t] [<input> [<output>]]\n");
+    printf("  -d   debug: show compiled code; implies -i\n"
+           "  -i   show information about compiled pattern\n"
+           "  -p   use POSIX interface\n"
+           "  -s   output store information\n"
+           "  -t   time compilation and execution\n");
+    return 1;
+    }
+  op++;
+  argc--;
+  }
+
+/* Sort out the input and output files */
+
+if (argc > 1)
+  {
+  infile = fopen(argv[op], "r");
+  if (infile == NULL)
+    {
+    printf("** Failed to open %s\n", argv[op]);
+    return 1;
+    }
+  }
+
+if (argc > 2)
+  {
+  outfile = fopen(argv[op+1], "w");
+  if (outfile == NULL)
+    {
+    printf("** Failed to open %s\n", argv[op+1]);
+    return 1;
+    }
+  }
+
+/* Set alternative malloc function */
+
+pcre_malloc = new_malloc;
+
+/* Heading line, then prompt for first regex if stdin */
+
+fprintf(outfile, "PCRE version %s\n\n", pcre_version());
+
+/* Main loop */
+
+while (!done)
+  {
+  pcre *re = NULL;
+  pcre_extra *extra = NULL;
+
+#if !defined NOPOSIX  /* There are still compilers that require no indent */
+  regex_t preg;
+  int do_posix = 0;
+#endif
+
+  const char *error;
+  unsigned char *p, *pp, *ppp;
+  unsigned const char *tables = NULL;
+  int do_study = 0;
+  int do_debug = debug;
+  int do_G = 0;
+  int do_g = 0;
+  int do_showinfo = showinfo;
+  int do_showrest = 0;
+  int erroroffset, len, delimiter;
+
+  if (infile == stdin) printf("  re> ");
+  if (fgets((char *)buffer, sizeof(buffer), infile) == NULL) break;
+  if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
+
+  p = buffer;
+  while (isspace(*p)) p++;
+  if (*p == 0) continue;
+
+  /* Get the delimiter and seek the end of the pattern; if is isn't
+  complete, read more. */
+
+  delimiter = *p++;
+
+  if (isalnum(delimiter) || delimiter == '\\')
+    {
+    fprintf(outfile, "** Delimiter must not be alphameric or \\\n");
+    goto SKIP_DATA;
+    }
+
+  pp = p;
+
+  for(;;)
+    {
+    while (*pp != 0)
+      {
+      if (*pp == '\\' && pp[1] != 0) pp++;
+        else if (*pp == delimiter) break;
+      pp++;
+      }
+    if (*pp != 0) break;
+
+    len = sizeof(buffer) - (pp - buffer);
+    if (len < 256)
+      {
+      fprintf(outfile, "** Expression too long - missing delimiter?\n");
+      goto SKIP_DATA;
+      }
+
+    if (infile == stdin) printf("    > ");
+    if (fgets((char *)pp, len, infile) == NULL)
+      {
+      fprintf(outfile, "** Unexpected EOF\n");
+      done = 1;
+      goto CONTINUE;
+      }
+    if (infile != stdin) fprintf(outfile, "%s", (char *)pp);
+    }
+
+  /* If the first character after the delimiter is backslash, make
+  the pattern end with backslash. This is purely to provide a way
+  of testing for the error message when a pattern ends with backslash. */
+
+  if (pp[1] == '\\') *pp++ = '\\';
+
+  /* Terminate the pattern at the delimiter */
+
+  *pp++ = 0;
+
+  /* Look for options after final delimiter */
+
+  options = 0;
+  study_options = 0;
+  log_store = showstore;  /* default from command line */
+
+  while (*pp != 0)
+    {
+    switch (*pp++)
+      {
+      case 'g': do_g = 1; break;
+      case 'i': options |= PCRE_CASELESS; break;
+      case 'm': options |= PCRE_MULTILINE; break;
+      case 's': options |= PCRE_DOTALL; break;
+      case 'x': options |= PCRE_EXTENDED; break;
+
+      case '+': do_showrest = 1; break;
+      case 'A': options |= PCRE_ANCHORED; break;
+      case 'D': do_debug = do_showinfo = 1; break;
+      case 'E': options |= PCRE_DOLLAR_ENDONLY; break;
+      case 'G': do_G = 1; break;
+      case 'I': do_showinfo = 1; break;
+      case 'M': log_store = 1; break;
+
+#if !defined NOPOSIX
+      case 'P': do_posix = 1; break;
+#endif
+
+      case 'S': do_study = 1; break;
+      case 'U': options |= PCRE_UNGREEDY; break;
+      case 'X': options |= PCRE_EXTRA; break;
+
+      case 'L':
+      ppp = pp;
+      while (*ppp != '\n' && *ppp != ' ') ppp++;
+      *ppp = 0;
+      if (setlocale(LC_CTYPE, (const char *)pp) == NULL)
+        {
+        fprintf(outfile, "** Failed to set locale \"%s\"\n", pp);
+        goto SKIP_DATA;
+        }
+      tables = pcre_maketables();
+      pp = ppp;
+      break;
+
+      case '\n': case ' ': break;
+      default:
+      fprintf(outfile, "** Unknown option '%c'\n", pp[-1]);
+      goto SKIP_DATA;
+      }
+    }
+
+  /* Handle compiling via the POSIX interface, which doesn't support the
+  timing, showing, or debugging options, nor the ability to pass over
+  local character tables. */
+
+#if !defined NOPOSIX
+  if (posix || do_posix)
+    {
+    int rc;
+    int cflags = 0;
+    if ((options & PCRE_CASELESS) != 0) cflags |= REG_ICASE;
+    if ((options & PCRE_MULTILINE) != 0) cflags |= REG_NEWLINE;
+    rc = regcomp(&preg, (char *)p, cflags);
+
+    /* Compilation failed; go back for another re, skipping to blank line
+    if non-interactive. */
+
+    if (rc != 0)
+      {
+      (void)regerror(rc, &preg, (char *)buffer, sizeof(buffer));
+      fprintf(outfile, "Failed: POSIX code %d: %s\n", rc, buffer);
+      goto SKIP_DATA;
+      }
+    }
+
+  /* Handle compiling via the native interface */
+
+  else
+#endif  /* !defined NOPOSIX */
+
+    {
+    if (timeit)
+      {
+      register int i;
+      clock_t time_taken;
+      clock_t start_time = clock();
+      for (i = 0; i < LOOPREPEAT; i++)
+        {
+        re = pcre_compile((char *)p, options, &error, &erroroffset, tables);
+        if (re != NULL) free(re);
+        }
+      time_taken = clock() - start_time;
+      fprintf(outfile, "Compile time %.3f milliseconds\n",
+        ((double)time_taken * 1000.0) /
+        ((double)LOOPREPEAT * (double)CLOCKS_PER_SEC));
+      }
+
+    re = pcre_compile((char *)p, options, &error, &erroroffset, tables);
+
+    /* Compilation failed; go back for another re, skipping to blank line
+    if non-interactive. */
+
+    if (re == NULL)
+      {
+      fprintf(outfile, "Failed: %s at offset %d\n", error, erroroffset);
+      SKIP_DATA:
+      if (infile != stdin)
+        {
+        for (;;)
+          {
+          if (fgets((char *)buffer, sizeof(buffer), infile) == NULL)
+            {
+            done = 1;
+            goto CONTINUE;
+            }
+          len = (int)strlen((char *)buffer);
+          while (len > 0 && isspace(buffer[len-1])) len--;
+          if (len == 0) break;
+          }
+        fprintf(outfile, "\n");
+        }
+      goto CONTINUE;
+      }
+
+    /* Compilation succeeded; print data if required. There are now two
+    info-returning functions. The old one has a limited interface and
+    returns only limited data. Check that it agrees with the newer one. */
+
+    if (do_showinfo)
+      {
+      int old_first_char, old_options, old_count;
+      int count, backrefmax, first_char, need_char;
+      size_t size;
+
+      if (do_debug) print_internals(re);
+
+      new_info(re, NULL, PCRE_INFO_OPTIONS, &options);
+      new_info(re, NULL, PCRE_INFO_SIZE, &size);
+      new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count);
+      new_info(re, NULL, PCRE_INFO_BACKREFMAX, &backrefmax);
+      new_info(re, NULL, PCRE_INFO_FIRSTCHAR, &first_char);
+      new_info(re, NULL, PCRE_INFO_LASTLITERAL, &need_char);
+
+      old_count = pcre_info(re, &old_options, &old_first_char);
+      if (count < 0) fprintf(outfile,
+        "Error %d from pcre_info()\n", count);
+      else
+        {
+        if (old_count != count) fprintf(outfile,
+          "Count disagreement: pcre_fullinfo=%d pcre_info=%d\n", count,
+            old_count);
+
+        if (old_first_char != first_char) fprintf(outfile,
+          "First char disagreement: pcre_fullinfo=%d pcre_info=%d\n",
+            first_char, old_first_char);
+
+        if (old_options != options) fprintf(outfile,
+          "Options disagreement: pcre_fullinfo=%d pcre_info=%d\n", options,
+            old_options);
+        }
+
+      if (size != gotten_store) fprintf(outfile,
+        "Size disagreement: pcre_fullinfo=%d call to malloc for %d\n",
+        size, gotten_store);
+
+      fprintf(outfile, "Capturing subpattern count = %d\n", count);
+      if (backrefmax > 0)
+        fprintf(outfile, "Max back reference = %d\n", backrefmax);
+      if (options == 0) fprintf(outfile, "No options\n");
+        else fprintf(outfile, "Options:%s%s%s%s%s%s%s%s\n",
+          ((options & PCRE_ANCHORED) != 0)? " anchored" : "",
+          ((options & PCRE_CASELESS) != 0)? " caseless" : "",
+          ((options & PCRE_EXTENDED) != 0)? " extended" : "",
+          ((options & PCRE_MULTILINE) != 0)? " multiline" : "",
+          ((options & PCRE_DOTALL) != 0)? " dotall" : "",
+          ((options & PCRE_DOLLAR_ENDONLY) != 0)? " dollar_endonly" : "",
+          ((options & PCRE_EXTRA) != 0)? " extra" : "",
+          ((options & PCRE_UNGREEDY) != 0)? " ungreedy" : "");
+
+      if (((((real_pcre *)re)->options) & PCRE_ICHANGED) != 0)
+        fprintf(outfile, "Case state changes\n");
+
+      if (first_char == -1)
+        {
+        fprintf(outfile, "First char at start or follows \\n\n");
+        }
+      else if (first_char < 0)
+        {
+        fprintf(outfile, "No first char\n");
+        }
+      else
+        {
+        if (isprint(first_char))
+          fprintf(outfile, "First char = \'%c\'\n", first_char);
+        else
+          fprintf(outfile, "First char = %d\n", first_char);
+        }
+
+      if (need_char < 0)
+        {
+        fprintf(outfile, "No need char\n");
+        }
+      else
+        {
+        if (isprint(need_char))
+          fprintf(outfile, "Need char = \'%c\'\n", need_char);
+        else
+          fprintf(outfile, "Need char = %d\n", need_char);
+        }
+      }
+
+    /* If /S was present, study the regexp to generate additional info to
+    help with the matching. */
+
+    if (do_study)
+      {
+      if (timeit)
+        {
+        register int i;
+        clock_t time_taken;
+        clock_t start_time = clock();
+        for (i = 0; i < LOOPREPEAT; i++)
+          extra = pcre_study(re, study_options, &error);
+        time_taken = clock() - start_time;
+        if (extra != NULL) free(extra);
+        fprintf(outfile, "  Study time %.3f milliseconds\n",
+          ((double)time_taken * 1000.0)/
+          ((double)LOOPREPEAT * (double)CLOCKS_PER_SEC));
+        }
+
+      extra = pcre_study(re, study_options, &error);
+      if (error != NULL)
+        fprintf(outfile, "Failed to study: %s\n", error);
+      else if (extra == NULL)
+        fprintf(outfile, "Study returned NULL\n");
+
+      else if (do_showinfo)
+        {
+        uschar *start_bits = NULL;
+        new_info(re, extra, PCRE_INFO_FIRSTTABLE, &start_bits);
+        if (start_bits == NULL)
+          fprintf(outfile, "No starting character set\n");
+        else
+          {
+          int i;
+          int c = 24;
+          fprintf(outfile, "Starting character set: ");
+          for (i = 0; i < 256; i++)
+            {
+            if ((start_bits[i/8] & (1<<(i%8))) != 0)
+              {
+              if (c > 75)
+                {
+                fprintf(outfile, "\n  ");
+                c = 2;
+                }
+              if (isprint(i) && i != ' ')
+                {
+                fprintf(outfile, "%c ", i);
+                c += 2;
+                }
+              else
+                {
+                fprintf(outfile, "\\x%02x ", i);
+                c += 5;
+                }
+              }
+            }
+          fprintf(outfile, "\n");
+          }
+        }
+      }
+    }
+
+  /* Read data lines and test them */
+
+  for (;;)
+    {
+    unsigned char *q;
+    unsigned char *bptr = dbuffer;
+    int count, c;
+    int copystrings = 0;
+    int getstrings = 0;
+    int getlist = 0;
+    int gmatched = 0;
+    int start_offset = 0;
+    int g_notempty = 0;
+    int offsets[45];
+    int size_offsets = sizeof(offsets)/sizeof(int);
+
+    options = 0;
+
+    if (infile == stdin) printf("data> ");
+    if (fgets((char *)buffer, sizeof(buffer), infile) == NULL)
+      {
+      done = 1;
+      goto CONTINUE;
+      }
+    if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
+
+    len = (int)strlen((char *)buffer);
+    while (len > 0 && isspace(buffer[len-1])) len--;
+    buffer[len] = 0;
+    if (len == 0) break;
+
+    p = buffer;
+    while (isspace(*p)) p++;
+
+    q = dbuffer;
+    while ((c = *p++) != 0)
+      {
+      int i = 0;
+      int n = 0;
+      if (c == '\\') switch ((c = *p++))
+        {
+        case 'a': c =    7; break;
+        case 'b': c = '\b'; break;
+        case 'e': c =   27; break;
+        case 'f': c = '\f'; break;
+        case 'n': c = '\n'; break;
+        case 'r': c = '\r'; break;
+        case 't': c = '\t'; break;
+        case 'v': c = '\v'; break;
+
+        case '0': case '1': case '2': case '3':
+        case '4': case '5': case '6': case '7':
+        c -= '0';
+        while (i++ < 2 && isdigit(*p) && *p != '8' && *p != '9')
+          c = c * 8 + *p++ - '0';
+        break;
+
+        case 'x':
+        c = 0;
+        while (i++ < 2 && isxdigit(*p))
+          {
+          c = c * 16 + tolower(*p) - ((isdigit(*p))? '0' : 'W');
+          p++;
+          }
+        break;
+
+        case 0:   /* Allows for an empty line */
+        p--;
+        continue;
+
+        case 'A':  /* Option setting */
+        options |= PCRE_ANCHORED;
+        continue;
+
+        case 'B':
+        options |= PCRE_NOTBOL;
+        continue;
+
+        case 'C':
+        while(isdigit(*p)) n = n * 10 + *p++ - '0';
+        copystrings |= 1 << n;
+        continue;
+
+        case 'G':
+        while(isdigit(*p)) n = n * 10 + *p++ - '0';
+        getstrings |= 1 << n;
+        continue;
+
+        case 'L':
+        getlist = 1;
+        continue;
+
+        case 'N':
+        options |= PCRE_NOTEMPTY;
+        continue;
+
+        case 'O':
+        while(isdigit(*p)) n = n * 10 + *p++ - '0';
+        if (n <= (int)(sizeof(offsets)/sizeof(int))) size_offsets = n;
+        continue;
+
+        case 'Z':
+        options |= PCRE_NOTEOL;
+        continue;
+        }
+      *q++ = c;
+      }
+    *q = 0;
+    len = q - dbuffer;
+
+    /* Handle matching via the POSIX interface, which does not
+    support timing. */
+
+#if !defined NOPOSIX
+    if (posix || do_posix)
+      {
+      int rc;
+      int eflags = 0;
+      regmatch_t pmatch[sizeof(offsets)/sizeof(int)];
+      if ((options & PCRE_NOTBOL) != 0) eflags |= REG_NOTBOL;
+      if ((options & PCRE_NOTEOL) != 0) eflags |= REG_NOTEOL;
+
+      rc = regexec(&preg, (const char *)bptr, size_offsets, pmatch, eflags);
+
+      if (rc != 0)
+        {
+        (void)regerror(rc, &preg, (char *)buffer, sizeof(buffer));
+        fprintf(outfile, "No match: POSIX code %d: %s\n", rc, buffer);
+        }
+      else
+        {
+        size_t i;
+        for (i = 0; i < size_offsets; i++)
+          {
+          if (pmatch[i].rm_so >= 0)
+            {
+            fprintf(outfile, "%2d: ", (int)i);
+            pchars(dbuffer + pmatch[i].rm_so,
+              pmatch[i].rm_eo - pmatch[i].rm_so);
+            fprintf(outfile, "\n");
+            if (i == 0 && do_showrest)
+              {
+              fprintf(outfile, " 0+ ");
+              pchars(dbuffer + pmatch[i].rm_eo, len - pmatch[i].rm_eo);
+              fprintf(outfile, "\n");
+              }
+            }
+          }
+        }
+      }
+
+    /* Handle matching via the native interface - repeats for /g and /G */
+
+    else
+#endif  /* !defined NOPOSIX */
+
+    for (;; gmatched++)    /* Loop for /g or /G */
+      {
+      if (timeit)
+        {
+        register int i;
+        clock_t time_taken;
+        clock_t start_time = clock();
+        for (i = 0; i < LOOPREPEAT; i++)
+          count = pcre_exec(re, extra, (char *)bptr, len,
+            start_offset, options | g_notempty, offsets, size_offsets);
+        time_taken = clock() - start_time;
+        fprintf(outfile, "Execute time %.3f milliseconds\n",
+          ((double)time_taken * 1000.0)/
+          ((double)LOOPREPEAT * (double)CLOCKS_PER_SEC));
+        }
+
+      count = pcre_exec(re, extra, (char *)bptr, len,
+        start_offset, options | g_notempty, offsets, size_offsets);
+
+      if (count == 0)
+        {
+        fprintf(outfile, "Matched, but too many substrings\n");
+        count = size_offsets/3;
+        }
+
+      /* Matched */
+
+      if (count >= 0)
+        {
+        int i;
+        for (i = 0; i < count * 2; i += 2)
+          {
+          if (offsets[i] < 0)
+            fprintf(outfile, "%2d: <unset>\n", i/2);
+          else
+            {
+            fprintf(outfile, "%2d: ", i/2);
+            pchars(bptr + offsets[i], offsets[i+1] - offsets[i]);
+            fprintf(outfile, "\n");
+            if (i == 0)
+              {
+              if (do_showrest)
+                {
+                fprintf(outfile, " 0+ ");
+                pchars(bptr + offsets[i+1], len - offsets[i+1]);
+                fprintf(outfile, "\n");
+                }
+              }
+            }
+          }
+
+        for (i = 0; i < 32; i++)
+          {
+          if ((copystrings & (1 << i)) != 0)
+            {
+            char copybuffer[16];
+            int rc = pcre_copy_substring((char *)bptr, offsets, count,
+              i, copybuffer, sizeof(copybuffer));
+            if (rc < 0)
+              fprintf(outfile, "copy substring %d failed %d\n", i, rc);
+            else
+              fprintf(outfile, "%2dC %s (%d)\n", i, copybuffer, rc);
+            }
+          }
+
+        for (i = 0; i < 32; i++)
+          {
+          if ((getstrings & (1 << i)) != 0)
+            {
+            const char *substring;
+            int rc = pcre_get_substring((char *)bptr, offsets, count,
+              i, &substring);
+            if (rc < 0)
+              fprintf(outfile, "get substring %d failed %d\n", i, rc);
+            else
+              {
+              fprintf(outfile, "%2dG %s (%d)\n", i, substring, rc);
+              free((void *)substring);
+              }
+            }
+          }
+
+        if (getlist)
+          {
+          const char **stringlist;
+          int rc = pcre_get_substring_list((char *)bptr, offsets, count,
+            &stringlist);
+          if (rc < 0)
+            fprintf(outfile, "get substring list failed %d\n", rc);
+          else
+            {
+            for (i = 0; i < count; i++)
+              fprintf(outfile, "%2dL %s\n", i, stringlist[i]);
+            if (stringlist[i] != NULL)
+              fprintf(outfile, "string list not terminated by NULL\n");
+            free((void *)stringlist);
+            }
+          }
+        }
+
+      /* Failed to match. If this is a /g or /G loop and we previously set
+      PCRE_NOTEMPTY after a null match, this is not necessarily the end.
+      We want to advance the start offset, and continue. Fudge the offset
+      values to achieve this. We won't be at the end of the string - that
+      was checked before setting PCRE_NOTEMPTY. */
+
+      else
+        {
+        if (g_notempty != 0)
+          {
+          offsets[0] = start_offset;
+          offsets[1] = start_offset + 1;
+          }
+        else
+          {
+          if (gmatched == 0)   /* Error if no previous matches */
+            {
+            if (count == -1) fprintf(outfile, "No match\n");
+              else fprintf(outfile, "Error %d\n", count);
+            }
+          break;  /* Out of the /g loop */
+          }
+        }
+
+      /* If not /g or /G we are done */
+
+      if (!do_g && !do_G) break;
+
+      /* If we have matched an empty string, first check to see if we are at
+      the end of the subject. If so, the /g loop is over. Otherwise, mimic
+      what Perl's /g options does. This turns out to be rather cunning. First
+      we set PCRE_NOTEMPTY and try the match again at the same point. If this
+      fails (picked up above) we advance to the next character. */
+
+      g_notempty = 0;
+      if (offsets[0] == offsets[1])
+        {
+        if (offsets[0] == len) break;
+        g_notempty = PCRE_NOTEMPTY;
+        }
+
+      /* For /g, update the start offset, leaving the rest alone */
+
+      if (do_g) start_offset = offsets[1];
+
+      /* For /G, update the pointer and length */
+
+      else
+        {
+        bptr += offsets[1];
+        len -= offsets[1];
+        }
+      }  /* End of loop for /g and /G */
+    }    /* End of loop for data lines */
+
+  CONTINUE:
+
+#if !defined NOPOSIX
+  if (posix || do_posix) regfree(&preg);
+#endif
+
+  if (re != NULL) free(re);
+  if (extra != NULL) free(extra);
+  if (tables != NULL)
+    {
+    free((void *)tables);
+    setlocale(LC_CTYPE, "C");
+    }
+  }
+
+fprintf(outfile, "\n");
+return 0;
+}
+
+/* End */
diff --git a/srclib/pcre/perltest b/srclib/pcre/perltest
new file mode 100755
index 0000000000..1e96c792b9
--- /dev/null
+++ b/srclib/pcre/perltest
@@ -0,0 +1,169 @@
+#! /usr/bin/perl
+
+# Program for testing regular expressions with perl to check that PCRE handles
+# them the same.
+
+
+# Function for turning a string into a string of printing chars
+
+sub pchars {
+my($t) = "";
+
+foreach $c (split(//, @_[0]))
+  {
+  if (ord $c >= 32 && ord $c < 127) { $t .= $c; }
+    else { $t .= sprintf("\\x%02x", ord $c); }
+  }
+$t;
+}
+
+
+
+# Read lines from named file or stdin and write to named file or stdout; lines
+# consist of a regular expression, in delimiters and optionally followed by
+# options, followed by a set of test data, terminated by an empty line.
+
+# Sort out the input and output files
+
+if (@ARGV > 0)
+  {
+  open(INFILE, "<$ARGV[0]") || die "Failed to open $ARGV[0]\n";
+  $infile = "INFILE";
+  }
+else { $infile = "STDIN"; }
+
+if (@ARGV > 1)
+  {
+  open(OUTFILE, ">$ARGV[1]") || die "Failed to open $ARGV[1]\n";
+  $outfile = "OUTFILE";
+  }
+else { $outfile = "STDOUT"; }
+
+printf($outfile "Perl $] Regular Expressions\n\n");
+
+# Main loop
+
+NEXT_RE:
+for (;;)
+  {
+  printf "  re> " if $infile eq "STDIN";
+  last if ! ($_ = <$infile>);
+  printf $outfile "$_" if $infile ne "STDIN";
+  next if ($_ eq "");
+
+  $pattern = $_;
+
+  while ($pattern !~ /^\s*(.).*\1/s)
+    {
+    printf "    > " if $infile eq "STDIN";
+    last if ! ($_ = <$infile>);
+    printf $outfile "$_" if $infile ne "STDIN";
+    $pattern .= $_;
+    }
+
+   chomp($pattern);
+   $pattern =~ s/\s+$//;
+
+  # The private /+ modifier means "print $' afterwards". We use it
+  # only on the end of patterns to make it easy to chop off here.
+
+  $showrest = ($pattern =~ s/\+(?=[a-z]*$)//);
+
+  # Check that the pattern is valid
+
+  eval "\$_ =~ ${pattern}";
+  if ($@)
+    {
+    printf $outfile "Error: $@";
+    next NEXT_RE;
+    }
+
+  # If the /g modifier is present, we want to put a loop round the matching;
+  # otherwise just a single "if".
+
+  $cmd = ($pattern =~ /g[a-z]*$/)? "while" : "if";
+
+  # If the pattern is actually the null string, Perl uses the most recently
+  # executed (and successfully compiled) regex is used instead. This is a
+  # nasty trap for the unwary! The PCRE test suite does contain null strings
+  # in places - if they are allowed through here all sorts of weird and
+  # unexpected effects happen. To avoid this, we replace such patterns with
+  # a non-null pattern that has the same effect.
+
+  $pattern = "/(?#)/$2" if ($pattern =~ /^(.)\1(.*)$/);
+
+  # Read data lines and test them
+
+  for (;;)
+    {
+    printf "data> " if $infile eq "STDIN";
+    last NEXT_RE if ! ($_ = <$infile>);
+    chomp;
+    printf $outfile "$_\n" if $infile ne "STDIN";
+
+    s/\s+$//;
+    s/^\s+//;
+
+    last if ($_ eq "");
+
+    $x = eval "\"$_\"";   # To get escapes processed
+
+    # Empty array for holding results, then do the matching.
+
+    @subs = ();
+
+    eval "${cmd} (\$x =~ ${pattern}) {" .
+         "push \@subs,\$&;" .
+         "push \@subs,\$1;" .
+         "push \@subs,\$2;" .
+         "push \@subs,\$3;" .
+         "push \@subs,\$4;" .
+         "push \@subs,\$5;" .
+         "push \@subs,\$6;" .
+         "push \@subs,\$7;" .
+         "push \@subs,\$8;" .
+         "push \@subs,\$9;" .
+         "push \@subs,\$10;" .
+         "push \@subs,\$11;" .
+         "push \@subs,\$12;" .
+         "push \@subs,\$13;" .
+         "push \@subs,\$14;" .
+         "push \@subs,\$15;" .
+         "push \@subs,\$16;" .
+         "push \@subs,\$'; }";
+
+    if ($@)
+      {
+      printf $outfile "Error: $@\n";
+      next NEXT_RE;
+      }
+    elsif (scalar(@subs) == 0)
+      {
+      printf $outfile "No match\n";
+      }
+    else
+      {
+      while (scalar(@subs) != 0)
+        {
+        printf $outfile (" 0: %s\n", &pchars($subs[0]));
+        printf $outfile (" 0+ %s\n", &pchars($subs[17])) if $showrest;
+        $last_printed = 0;
+        for ($i = 1; $i <= 16; $i++)
+          {
+          if (defined $subs[$i])
+            {
+            while ($last_printed++ < $i-1)
+              { printf $outfile ("%2d: <unset>\n", $last_printed); }
+            printf $outfile ("%2d: %s\n", $i, &pchars($subs[$i]));
+            $last_printed = $i;
+            }
+          }
+        splice(@subs, 0, 18);
+        }
+      }
+    }
+  }
+
+printf $outfile "\n";
+
+# End
diff --git a/srclib/pcre/pgrep.c b/srclib/pcre/pgrep.c
new file mode 100644
index 0000000000..ad1b87eae9
--- /dev/null
+++ b/srclib/pcre/pgrep.c
@@ -0,0 +1,225 @@
+/*************************************************
+*               PCRE grep program                *
+*************************************************/
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <errno.h>
+#include "config.h"
+#include "pcre.h"
+
+#define FALSE 0
+#define TRUE 1
+
+typedef int BOOL;
+
+
+
+/*************************************************
+*               Global variables                 *
+*************************************************/
+
+static pcre *pattern;
+static pcre_extra *hints;
+
+static BOOL count_only = FALSE;
+static BOOL filenames_only = FALSE;
+static BOOL invert = FALSE;
+static BOOL number = FALSE;
+static BOOL silent = FALSE;
+static BOOL whole_lines = FALSE;
+
+
+
+#if ! HAVE_STRERROR
+/*************************************************
+*     Provide strerror() for non-ANSI libraries  *
+*************************************************/
+
+/* Some old-fashioned systems still around (e.g. SunOS4) don't have strerror()
+in their libraries, but can provide the same facility by this simple
+alternative function. */
+
+extern int   sys_nerr;
+extern char *sys_errlist[];
+
+char *
+strerror(int n)
+{
+if (n < 0 || n >= sys_nerr) return "unknown error number";
+return sys_errlist[n];
+}
+#endif /* HAVE_STRERROR */
+
+
+
+/*************************************************
+*              Grep an individual file           *
+*************************************************/
+
+static int
+pgrep(FILE *in, char *name)
+{
+int rc = 1;
+int linenumber = 0;
+int count = 0;
+int offsets[99];
+char buffer[BUFSIZ];
+
+while (fgets(buffer, sizeof(buffer), in) != NULL)
+  {
+  BOOL match;
+  int length = (int)strlen(buffer);
+  if (length > 0 && buffer[length-1] == '\n') buffer[--length] = 0;
+  linenumber++;
+
+  match = pcre_exec(pattern, hints, buffer, length, 0, 0, offsets, 99) >= 0;
+  if (match && whole_lines && offsets[1] != length) match = FALSE;
+
+  if (match != invert)
+    {
+    if (count_only) count++;
+
+    else if (filenames_only)
+      {
+      fprintf(stdout, "%s\n", (name == NULL)? "<stdin>" : name);
+      return 0;
+      }
+
+    else if (silent) return 0;
+
+    else
+      {
+      if (name != NULL) fprintf(stdout, "%s:", name);
+      if (number) fprintf(stdout, "%d:", linenumber);
+      fprintf(stdout, "%s\n", buffer);
+      }
+
+    rc = 0;
+    }
+  }
+
+if (count_only)
+  {
+  if (name != NULL) fprintf(stdout, "%s:", name);
+  fprintf(stdout, "%d\n", count);
+  }
+
+return rc;
+}
+
+
+
+
+/*************************************************
+*                Usage function                  *
+*************************************************/
+
+static int
+usage(int rc)
+{
+fprintf(stderr, "Usage: pgrep [-Vchilnsvx] pattern [file] ...\n");
+return rc;
+}
+
+
+
+
+/*************************************************
+*                Main program                    *
+*************************************************/
+
+int
+main(int argc, char **argv)
+{
+int i;
+int rc = 1;
+int options = 0;
+int errptr;
+const char *error;
+BOOL filenames = TRUE;
+
+/* Process the options */
+
+for (i = 1; i < argc; i++)
+  {
+  char *s;
+  if (argv[i][0] != '-') break;
+  s = argv[i] + 1;
+  while (*s != 0)
+    {
+    switch (*s++)
+      {
+      case 'c': count_only = TRUE; break;
+      case 'h': filenames = FALSE; break;
+      case 'i': options |= PCRE_CASELESS; break;
+      case 'l': filenames_only = TRUE;
+      case 'n': number = TRUE; break;
+      case 's': silent = TRUE; break;
+      case 'v': invert = TRUE; break;
+      case 'x': whole_lines = TRUE; options |= PCRE_ANCHORED; break;
+
+      case 'V':
+      fprintf(stderr, "PCRE version %s\n", pcre_version());
+      break;
+
+      default:
+      fprintf(stderr, "pgrep: unknown option %c\n", s[-1]);
+      return usage(2);
+      }
+    }
+  }
+
+/* There must be at least a regexp argument */
+
+if (i >= argc) return usage(0);
+
+/* Compile the regular expression. */
+
+pattern = pcre_compile(argv[i++], options, &error, &errptr, NULL);
+if (pattern == NULL)
+  {
+  fprintf(stderr, "pgrep: error in regex at offset %d: %s\n", errptr, error);
+  return 2;
+  }
+
+/* Study the regular expression, as we will be running it may times */
+
+hints = pcre_study(pattern, 0, &error);
+if (error != NULL)
+  {
+  fprintf(stderr, "pgrep: error while studing regex: %s\n", error);
+  return 2;
+  }
+
+/* If there are no further arguments, do the business on stdin and exit */
+
+if (i >= argc) return pgrep(stdin, NULL);
+
+/* Otherwise, work through the remaining arguments as files. If there is only
+one, don't give its name on the output. */
+
+if (i == argc - 1) filenames = FALSE;
+if (filenames_only) filenames = TRUE;
+
+for (; i < argc; i++)
+  {
+  FILE *in = fopen(argv[i], "r");
+  if (in == NULL)
+    {
+    fprintf(stderr, "%s: failed to open: %s\n", argv[i], strerror(errno));
+    rc = 2;
+    }
+  else
+    {
+    int frc = pgrep(in, filenames? argv[i] : NULL);
+    if (frc == 0 && rc == 1) rc = 0;
+    fclose(in);
+    }
+  }
+
+return rc;
+}
+
+/* End */
diff --git a/srclib/pcre/study.c b/srclib/pcre/study.c
new file mode 100644
index 0000000000..676db94665
--- /dev/null
+++ b/srclib/pcre/study.c
@@ -0,0 +1,397 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+/*
+This is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language. See
+the file Tech.Notes for some information on the internals.
+
+Written by: Philip Hazel <ph10@cam.ac.uk>
+
+           Copyright (c) 1997-2000 University of Cambridge
+
+-----------------------------------------------------------------------------
+Permission is granted to anyone to use this software for any purpose on any
+computer system, and to redistribute it freely, subject to the following
+restrictions:
+
+1. This software is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+2. The origin of this software must not be misrepresented, either by
+   explicit claim or by omission.
+
+3. Altered versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+
+4. If PCRE is embedded in any software that is released under the GNU
+   General Purpose Licence (GPL), then the terms of that licence shall
+   supersede any condition above with which it is incompatible.
+-----------------------------------------------------------------------------
+*/
+
+
+/* Include the internals header, which itself includes Standard C headers plus
+the external pcre header. */
+
+#include "internal.h"
+
+
+
+/*************************************************
+*      Set a bit and maybe its alternate case    *
+*************************************************/
+
+/* Given a character, set its bit in the table, and also the bit for the other
+version of a letter if we are caseless.
+
+Arguments:
+  start_bits    points to the bit map
+  c             is the character
+  caseless      the caseless flag
+  cd            the block with char table pointers
+
+Returns:        nothing
+*/
+
+static void
+set_bit(uschar *start_bits, int c, BOOL caseless, compile_data *cd)
+{
+start_bits[c/8] |= (1 << (c&7));
+if (caseless && (cd->ctypes[c] & ctype_letter) != 0)
+  start_bits[cd->fcc[c]/8] |= (1 << (cd->fcc[c]&7));
+}
+
+
+
+/*************************************************
+*          Create bitmap of starting chars       *
+*************************************************/
+
+/* This function scans a compiled unanchored expression and attempts to build a
+bitmap of the set of initial characters. If it can't, it returns FALSE. As time
+goes by, we may be able to get more clever at doing this.
+
+Arguments:
+  code         points to an expression
+  start_bits   points to a 32-byte table, initialized to 0
+  caseless     the current state of the caseless flag
+  cd           the block with char table pointers
+
+Returns:       TRUE if table built, FALSE otherwise
+*/
+
+static BOOL
+set_start_bits(const uschar *code, uschar *start_bits, BOOL caseless,
+  compile_data *cd)
+{
+register int c;
+
+/* This next statement and the later reference to dummy are here in order to
+trick the optimizer of the IBM C compiler for OS/2 into generating correct
+code. Apparently IBM isn't going to fix the problem, and we would rather not
+disable optimization (in this module it actually makes a big difference, and
+the pcre module can use all the optimization it can get). */
+
+volatile int dummy;
+
+do
+  {
+  const uschar *tcode = code + 3;
+  BOOL try_next = TRUE;
+
+  while (try_next)
+    {
+    try_next = FALSE;
+
+    /* If a branch starts with a bracket or a positive lookahead assertion,
+    recurse to set bits from within them. That's all for this branch. */
+
+    if ((int)*tcode >= OP_BRA || *tcode == OP_ASSERT)
+      {
+      if (!set_start_bits(tcode, start_bits, caseless, cd))
+        return FALSE;
+      }
+
+    else switch(*tcode)
+      {
+      default:
+      return FALSE;
+
+      /* Skip over lookbehind and negative lookahead assertions */
+
+      case OP_ASSERT_NOT:
+      case OP_ASSERTBACK:
+      case OP_ASSERTBACK_NOT:
+      try_next = TRUE;
+      do tcode += (tcode[1] << 8) + tcode[2]; while (*tcode == OP_ALT);
+      tcode += 3;
+      break;
+
+      /* Skip over an option setting, changing the caseless flag */
+
+      case OP_OPT:
+      caseless = (tcode[1] & PCRE_CASELESS) != 0;
+      tcode += 2;
+      try_next = TRUE;
+      break;
+
+      /* BRAZERO does the bracket, but carries on. */
+
+      case OP_BRAZERO:
+      case OP_BRAMINZERO:
+      if (!set_start_bits(++tcode, start_bits, caseless, cd))
+        return FALSE;
+      dummy = 1;
+      do tcode += (tcode[1] << 8) + tcode[2]; while (*tcode == OP_ALT);
+      tcode += 3;
+      try_next = TRUE;
+      break;
+
+      /* Single-char * or ? sets the bit and tries the next item */
+
+      case OP_STAR:
+      case OP_MINSTAR:
+      case OP_QUERY:
+      case OP_MINQUERY:
+      set_bit(start_bits, tcode[1], caseless, cd);
+      tcode += 2;
+      try_next = TRUE;
+      break;
+
+      /* Single-char upto sets the bit and tries the next */
+
+      case OP_UPTO:
+      case OP_MINUPTO:
+      set_bit(start_bits, tcode[3], caseless, cd);
+      tcode += 4;
+      try_next = TRUE;
+      break;
+
+      /* At least one single char sets the bit and stops */
+
+      case OP_EXACT:       /* Fall through */
+      tcode++;
+
+      case OP_CHARS:       /* Fall through */
+      tcode++;
+
+      case OP_PLUS:
+      case OP_MINPLUS:
+      set_bit(start_bits, tcode[1], caseless, cd);
+      break;
+
+      /* Single character type sets the bits and stops */
+
+      case OP_NOT_DIGIT:
+      for (c = 0; c < 32; c++)
+        start_bits[c] |= ~cd->cbits[c+cbit_digit];
+      break;
+
+      case OP_DIGIT:
+      for (c = 0; c < 32; c++)
+        start_bits[c] |= cd->cbits[c+cbit_digit];
+      break;
+
+      case OP_NOT_WHITESPACE:
+      for (c = 0; c < 32; c++)
+        start_bits[c] |= ~cd->cbits[c+cbit_space];
+      break;
+
+      case OP_WHITESPACE:
+      for (c = 0; c < 32; c++)
+        start_bits[c] |= cd->cbits[c+cbit_space];
+      break;
+
+      case OP_NOT_WORDCHAR:
+      for (c = 0; c < 32; c++)
+        start_bits[c] |= ~cd->cbits[c+cbit_word];
+      break;
+
+      case OP_WORDCHAR:
+      for (c = 0; c < 32; c++)
+        start_bits[c] |= cd->cbits[c+cbit_word];
+      break;
+
+      /* One or more character type fudges the pointer and restarts, knowing
+      it will hit a single character type and stop there. */
+
+      case OP_TYPEPLUS:
+      case OP_TYPEMINPLUS:
+      tcode++;
+      try_next = TRUE;
+      break;
+
+      case OP_TYPEEXACT:
+      tcode += 3;
+      try_next = TRUE;
+      break;
+
+      /* Zero or more repeats of character types set the bits and then
+      try again. */
+
+      case OP_TYPEUPTO:
+      case OP_TYPEMINUPTO:
+      tcode += 2;               /* Fall through */
+
+      case OP_TYPESTAR:
+      case OP_TYPEMINSTAR:
+      case OP_TYPEQUERY:
+      case OP_TYPEMINQUERY:
+      switch(tcode[1])
+        {
+        case OP_NOT_DIGIT:
+        for (c = 0; c < 32; c++)
+          start_bits[c] |= ~cd->cbits[c+cbit_digit];
+        break;
+
+        case OP_DIGIT:
+        for (c = 0; c < 32; c++)
+          start_bits[c] |= cd->cbits[c+cbit_digit];
+        break;
+
+        case OP_NOT_WHITESPACE:
+        for (c = 0; c < 32; c++)
+          start_bits[c] |= ~cd->cbits[c+cbit_space];
+        break;
+
+        case OP_WHITESPACE:
+        for (c = 0; c < 32; c++)
+          start_bits[c] |= cd->cbits[c+cbit_space];
+        break;
+
+        case OP_NOT_WORDCHAR:
+        for (c = 0; c < 32; c++)
+          start_bits[c] |= ~cd->cbits[c+cbit_word];
+        break;
+
+        case OP_WORDCHAR:
+        for (c = 0; c < 32; c++)
+          start_bits[c] |= cd->cbits[c+cbit_word];
+        break;
+        }
+
+      tcode += 2;
+      try_next = TRUE;
+      break;
+
+      /* Character class: set the bits and either carry on or not,
+      according to the repeat count. */
+
+      case OP_CLASS:
+        {
+        tcode++;
+        for (c = 0; c < 32; c++) start_bits[c] |= tcode[c];
+        tcode += 32;
+        switch (*tcode)
+          {
+          case OP_CRSTAR:
+          case OP_CRMINSTAR:
+          case OP_CRQUERY:
+          case OP_CRMINQUERY:
+          tcode++;
+          try_next = TRUE;
+          break;
+
+          case OP_CRRANGE:
+          case OP_CRMINRANGE:
+          if (((tcode[1] << 8) + tcode[2]) == 0)
+            {
+            tcode += 5;
+            try_next = TRUE;
+            }
+          break;
+          }
+        }
+      break; /* End of class handling */
+
+      }      /* End of switch */
+    }        /* End of try_next loop */
+
+  code += (code[1] << 8) + code[2];   /* Advance to next branch */
+  }
+while (*code == OP_ALT);
+return TRUE;
+}
+
+
+
+/*************************************************
+*          Study a compiled expression           *
+*************************************************/
+
+/* This function is handed a compiled expression that it must study to produce
+information that will speed up the matching. It returns a pcre_extra block
+which then gets handed back to pcre_exec().
+
+Arguments:
+  re        points to the compiled expression
+  options   contains option bits
+  errorptr  points to where to place error messages;
+            set NULL unless error
+
+Returns:    pointer to a pcre_extra block,
+            NULL on error or if no optimization possible
+*/
+
+pcre_extra *
+pcre_study(const pcre *external_re, int options, const char **errorptr)
+{
+uschar start_bits[32];
+real_pcre_extra *extra;
+const real_pcre *re = (const real_pcre *)external_re;
+compile_data compile_block;
+
+*errorptr = NULL;
+
+if (re == NULL || re->magic_number != MAGIC_NUMBER)
+  {
+  *errorptr = "argument is not a compiled regular expression";
+  return NULL;
+  }
+
+if ((options & ~PUBLIC_STUDY_OPTIONS) != 0)
+  {
+  *errorptr = "unknown or incorrect option bit(s) set";
+  return NULL;
+  }
+
+/* For an anchored pattern, or an unchored pattern that has a first char, or a
+multiline pattern that matches only at "line starts", no further processing at
+present. */
+
+if ((re->options & (PCRE_ANCHORED|PCRE_FIRSTSET|PCRE_STARTLINE)) != 0)
+  return NULL;
+
+/* Set the character tables in the block which is passed around */
+
+compile_block.lcc = re->tables + lcc_offset;
+compile_block.fcc = re->tables + fcc_offset;
+compile_block.cbits = re->tables + cbits_offset;
+compile_block.ctypes = re->tables + ctypes_offset;
+
+/* See if we can find a fixed set of initial characters for the pattern. */
+
+memset(start_bits, 0, 32 * sizeof(uschar));
+if (!set_start_bits(re->code, start_bits, (re->options & PCRE_CASELESS) != 0,
+  &compile_block)) return NULL;
+
+/* Get an "extra" block and put the information therein. */
+
+extra = (real_pcre_extra *)(pcre_malloc)(sizeof(real_pcre_extra));
+
+if (extra == NULL)
+  {
+  *errorptr = "failed to get memory";
+  return NULL;
+  }
+
+extra->options = PCRE_STUDY_MAPPED;
+memcpy(extra->start_bits, start_bits, sizeof(start_bits));
+
+return (pcre_extra *)extra;
+}
+
+/* End of study.c */
diff --git a/srclib/pcre/testdata/testinput1 b/srclib/pcre/testdata/testinput1
new file mode 100644
index 0000000000..d72a2c580b
--- /dev/null
+++ b/srclib/pcre/testdata/testinput1
@@ -0,0 +1,1901 @@
+/the quick brown fox/
+    the quick brown fox
+    The quick brown FOX
+    What do you know about the quick brown fox?
+    What do you know about THE QUICK BROWN FOX?
+
+/The quick brown fox/i
+    the quick brown fox
+    The quick brown FOX
+    What do you know about the quick brown fox?
+    What do you know about THE QUICK BROWN FOX?
+
+/abcd\t\n\r\f\a\e\071\x3b\$\\\?caxyz/
+    abcd\t\n\r\f\a\e9;\$\\?caxyz
+
+/a*abc?xyz+pqr{3}ab{2,}xy{4,5}pq{0,6}AB{0,}zz/
+    abxyzpqrrrabbxyyyypqAzz
+    abxyzpqrrrabbxyyyypqAzz
+    aabxyzpqrrrabbxyyyypqAzz
+    aaabxyzpqrrrabbxyyyypqAzz
+    aaaabxyzpqrrrabbxyyyypqAzz
+    abcxyzpqrrrabbxyyyypqAzz
+    aabcxyzpqrrrabbxyyyypqAzz
+    aaabcxyzpqrrrabbxyyyypAzz
+    aaabcxyzpqrrrabbxyyyypqAzz
+    aaabcxyzpqrrrabbxyyyypqqAzz
+    aaabcxyzpqrrrabbxyyyypqqqAzz
+    aaabcxyzpqrrrabbxyyyypqqqqAzz
+    aaabcxyzpqrrrabbxyyyypqqqqqAzz
+    aaabcxyzpqrrrabbxyyyypqqqqqqAzz
+    aaaabcxyzpqrrrabbxyyyypqAzz
+    abxyzzpqrrrabbxyyyypqAzz
+    aabxyzzzpqrrrabbxyyyypqAzz
+    aaabxyzzzzpqrrrabbxyyyypqAzz
+    aaaabxyzzzzpqrrrabbxyyyypqAzz
+    abcxyzzpqrrrabbxyyyypqAzz
+    aabcxyzzzpqrrrabbxyyyypqAzz
+    aaabcxyzzzzpqrrrabbxyyyypqAzz
+    aaaabcxyzzzzpqrrrabbxyyyypqAzz
+    aaaabcxyzzzzpqrrrabbbxyyyypqAzz
+    aaaabcxyzzzzpqrrrabbbxyyyyypqAzz
+    aaabcxyzpqrrrabbxyyyypABzz
+    aaabcxyzpqrrrabbxyyyypABBzz
+    >>>aaabxyzpqrrrabbxyyyypqAzz
+    >aaaabxyzpqrrrabbxyyyypqAzz
+    >>>>abcxyzpqrrrabbxyyyypqAzz
+    *** Failers
+    abxyzpqrrabbxyyyypqAzz
+    abxyzpqrrrrabbxyyyypqAzz
+    abxyzpqrrrabxyyyypqAzz
+    aaaabcxyzzzzpqrrrabbbxyyyyyypqAzz
+    aaaabcxyzzzzpqrrrabbbxyyypqAzz
+    aaabcxyzpqrrrabbxyyyypqqqqqqqAzz
+
+/^(abc){1,2}zz/
+    abczz
+    abcabczz
+    *** Failers
+    zz
+    abcabcabczz
+    >>abczz
+
+/^(b+?|a){1,2}?c/
+    bc
+    bbc
+    bbbc
+    bac
+    bbac
+    aac
+    abbbbbbbbbbbc
+    bbbbbbbbbbbac
+    *** Failers
+    aaac
+    abbbbbbbbbbbac
+
+/^(b+|a){1,2}c/
+    bc
+    bbc
+    bbbc
+    bac
+    bbac
+    aac
+    abbbbbbbbbbbc
+    bbbbbbbbbbbac
+    *** Failers
+    aaac
+    abbbbbbbbbbbac
+
+/^(b+|a){1,2}?bc/
+    bbc
+
+/^(b*|ba){1,2}?bc/
+    babc
+    bbabc
+    bababc
+    *** Failers
+    bababbc
+    babababc
+
+/^(ba|b*){1,2}?bc/
+    babc
+    bbabc
+    bababc
+    *** Failers
+    bababbc
+    babababc
+
+/^\ca\cA\c[\c{\c:/
+    \x01\x01\e;z
+
+/^[ab\]cde]/
+    athing
+    bthing
+    ]thing
+    cthing
+    dthing
+    ething
+    *** Failers
+    fthing
+    [thing
+    \\thing
+
+/^[]cde]/
+    ]thing
+    cthing
+    dthing
+    ething
+    *** Failers
+    athing
+    fthing
+
+/^[^ab\]cde]/
+    fthing
+    [thing
+    \\thing
+    *** Failers
+    athing
+    bthing
+    ]thing
+    cthing
+    dthing
+    ething
+
+/^[^]cde]/
+    athing
+    fthing
+    *** Failers
+    ]thing
+    cthing
+    dthing
+    ething
+
+/^\�/
+    �
+
+/^�/
+    �
+
+/^[0-9]+$/
+    0
+    1
+    2
+    3
+    4
+    5
+    6
+    7
+    8
+    9
+    10
+    100
+    *** Failers
+    abc
+
+/^.*nter/
+    enter
+    inter
+    uponter
+
+/^xxx[0-9]+$/
+    xxx0
+    xxx1234
+    *** Failers
+    xxx
+
+/^.+[0-9][0-9][0-9]$/
+    x123
+    xx123
+    123456
+    *** Failers
+    123
+    x1234
+
+/^.+?[0-9][0-9][0-9]$/
+    x123
+    xx123
+    123456
+    *** Failers
+    123
+    x1234
+
+/^([^!]+)!(.+)=apquxz\.ixr\.zzz\.ac\.uk$/
+    abc!pqr=apquxz.ixr.zzz.ac.uk
+    *** Failers
+    !pqr=apquxz.ixr.zzz.ac.uk
+    abc!=apquxz.ixr.zzz.ac.uk
+    abc!pqr=apquxz:ixr.zzz.ac.uk
+    abc!pqr=apquxz.ixr.zzz.ac.ukk
+
+/:/
+    Well, we need a colon: somewhere
+    *** Fail if we don't
+
+/([\da-f:]+)$/i
+    0abc
+    abc
+    fed
+    E
+    ::
+    5f03:12C0::932e
+    fed def
+    Any old stuff
+    *** Failers
+    0zzz
+    gzzz
+    fed\x20
+    Any old rubbish
+
+/^.*\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})$/
+    .1.2.3
+    A.12.123.0
+    *** Failers
+    .1.2.3333
+    1.2.3
+    1234.2.3
+
+/^(\d+)\s+IN\s+SOA\s+(\S+)\s+(\S+)\s*\(\s*$/
+    1 IN SOA non-sp1 non-sp2(
+    1    IN    SOA    non-sp1    non-sp2   (
+    *** Failers
+    1IN SOA non-sp1 non-sp2(
+
+/^[a-zA-Z\d][a-zA-Z\d\-]*(\.[a-zA-Z\d][a-zA-z\d\-]*)*\.$/
+    a.
+    Z.
+    2.
+    ab-c.pq-r.
+    sxk.zzz.ac.uk.
+    x-.y-.
+    *** Failers
+    -abc.peq.
+
+/^\*\.[a-z]([a-z\-\d]*[a-z\d]+)?(\.[a-z]([a-z\-\d]*[a-z\d]+)?)*$/
+    *.a
+    *.b0-a
+    *.c3-b.c
+    *.c-a.b-c
+    *** Failers
+    *.0
+    *.a-
+    *.a-b.c-
+    *.c-a.0-c
+
+/^(?=ab(de))(abd)(e)/
+    abde
+
+/^(?!(ab)de|x)(abd)(f)/
+    abdf
+
+/^(?=(ab(cd)))(ab)/
+    abcd
+
+/^[\da-f](\.[\da-f])*$/i
+    a.b.c.d
+    A.B.C.D
+    a.b.c.1.2.3.C
+
+/^\".*\"\s*(;.*)?$/
+    \"1234\"
+    \"abcd\" ;
+    \"\" ; rhubarb
+    *** Failers
+    \"1234\" : things
+
+/^$/
+    \
+    *** Failers
+
+/   ^    a   (?# begins with a)  b\sc (?# then b c) $ (?# then end)/x
+    ab c
+    *** Failers
+    abc
+    ab cde
+
+/(?x)   ^    a   (?# begins with a)  b\sc (?# then b c) $ (?# then end)/
+    ab c
+    *** Failers
+    abc
+    ab cde
+
+/^   a\ b[c ]d       $/x
+    a bcd
+    a b d
+    *** Failers
+    abcd
+    ab d
+
+/^(a(b(c)))(d(e(f)))(h(i(j)))(k(l(m)))$/
+    abcdefhijklm
+
+/^(?:a(b(c)))(?:d(e(f)))(?:h(i(j)))(?:k(l(m)))$/
+    abcdefhijklm
+
+/^[\w][\W][\s][\S][\d][\D][\b][\n][\c]][\022]/
+    a+ Z0+\x08\n\x1d\x12
+
+/^[.^$|()*+?{,}]+/
+    .^\$(*+)|{?,?}
+
+/^a*\w/
+    z
+    az
+    aaaz
+    a
+    aa
+    aaaa
+    a+
+    aa+
+
+/^a*?\w/
+    z
+    az
+    aaaz
+    a
+    aa
+    aaaa
+    a+
+    aa+
+
+/^a+\w/
+    az
+    aaaz
+    aa
+    aaaa
+    aa+
+
+/^a+?\w/
+    az
+    aaaz
+    aa
+    aaaa
+    aa+
+
+/^\d{8}\w{2,}/
+    1234567890
+    12345678ab
+    12345678__
+    *** Failers
+    1234567
+
+/^[aeiou\d]{4,5}$/
+    uoie
+    1234
+    12345
+    aaaaa
+    *** Failers
+    123456
+
+/^[aeiou\d]{4,5}?/
+    uoie
+    1234
+    12345
+    aaaaa
+    123456
+
+/\A(abc|def)=(\1){2,3}\Z/
+    abc=abcabc
+    def=defdefdef
+    *** Failers
+    abc=defdef
+
+/^(a)(b)(c)(d)(e)(f)(g)(h)(i)(j)(k)\11*(\3\4)\1(?#)2$/
+    abcdefghijkcda2
+    abcdefghijkkkkcda2
+
+/(cat(a(ract|tonic)|erpillar)) \1()2(3)/
+    cataract cataract23
+    catatonic catatonic23
+    caterpillar caterpillar23
+
+
+/^From +([^ ]+) +[a-zA-Z][a-zA-Z][a-zA-Z] +[a-zA-Z][a-zA-Z][a-zA-Z] +[0-9]?[0-9] +[0-9][0-9]:[0-9][0-9]/
+    From abcd  Mon Sep 01 12:33:02 1997
+
+/^From\s+\S+\s+([a-zA-Z]{3}\s+){2}\d{1,2}\s+\d\d:\d\d/
+    From abcd  Mon Sep 01 12:33:02 1997
+    From abcd  Mon Sep  1 12:33:02 1997
+    *** Failers
+    From abcd  Sep 01 12:33:02 1997
+
+/^12.34/s
+    12\n34
+    12\r34
+
+/\w+(?=\t)/
+    the quick brown\t fox
+
+/foo(?!bar)(.*)/
+    foobar is foolish see?
+
+/(?:(?!foo)...|^.{0,2})bar(.*)/
+    foobar crowbar etc
+    barrel
+    2barrel
+    A barrel
+
+/^(\D*)(?=\d)(?!123)/
+    abc456
+    *** Failers
+    abc123
+
+/^1234(?# test newlines
+  inside)/
+    1234
+
+/^1234 #comment in extended re
+  /x
+    1234
+
+/#rhubarb
+  abcd/x
+    abcd
+
+/^abcd#rhubarb/x
+    abcd
+
+/^(a)\1{2,3}(.)/
+    aaab
+    aaaab
+    aaaaab
+    aaaaaab
+
+/(?!^)abc/
+    the abc
+    *** Failers
+    abc
+
+/(?=^)abc/
+    abc
+    *** Failers
+    the abc
+
+/^[ab]{1,3}(ab*|b)/
+    aabbbbb
+
+/^[ab]{1,3}?(ab*|b)/
+    aabbbbb
+
+/^[ab]{1,3}?(ab*?|b)/
+    aabbbbb
+
+/^[ab]{1,3}(ab*?|b)/
+    aabbbbb
+
+/  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*                          # optional leading comment
+(?:    (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+" (?:                      # opening quote...
+[^\\\x80-\xff\n\015"]                #   Anything except backslash and quote
+|                     #    or
+\\ [^\x80-\xff]           #   Escaped something (something != CR)
+)* "  # closing quote
+)                    # initial word
+(?:  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  \.  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*   (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+" (?:                      # opening quote...
+[^\\\x80-\xff\n\015"]                #   Anything except backslash and quote
+|                     #    or
+\\ [^\x80-\xff]           #   Escaped something (something != CR)
+)* "  # closing quote
+)  )* # further okay, if led by a period
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  @  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*    (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                           # initial subdomain
+(?:                                  #
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  \.                        # if led by a period...
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*   (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                     #   ...further okay
+)*
+# address
+|                     #  or
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+" (?:                      # opening quote...
+[^\\\x80-\xff\n\015"]                #   Anything except backslash and quote
+|                     #    or
+\\ [^\x80-\xff]           #   Escaped something (something != CR)
+)* "  # closing quote
+)             # one word, optionally followed by....
+(?:
+[^()<>@,;:".\\\[\]\x80-\xff\000-\010\012-\037]  |  # atom and space parts, or...
+\(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)       |  # comments, or...
+
+" (?:                      # opening quote...
+[^\\\x80-\xff\n\015"]                #   Anything except backslash and quote
+|                     #    or
+\\ [^\x80-\xff]           #   Escaped something (something != CR)
+)* "  # closing quote
+# quoted strings
+)*
+<  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*                     # leading <
+(?:  @  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*    (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                           # initial subdomain
+(?:                                  #
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  \.                        # if led by a period...
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*   (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                     #   ...further okay
+)*
+
+(?:  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  ,  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  @  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*    (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                           # initial subdomain
+(?:                                  #
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  \.                        # if led by a period...
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*   (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                     #   ...further okay
+)*
+)* # further okay, if led by comma
+:                                # closing colon
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  )? #       optional route
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+" (?:                      # opening quote...
+[^\\\x80-\xff\n\015"]                #   Anything except backslash and quote
+|                     #    or
+\\ [^\x80-\xff]           #   Escaped something (something != CR)
+)* "  # closing quote
+)                    # initial word
+(?:  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  \.  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*   (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+" (?:                      # opening quote...
+[^\\\x80-\xff\n\015"]                #   Anything except backslash and quote
+|                     #    or
+\\ [^\x80-\xff]           #   Escaped something (something != CR)
+)* "  # closing quote
+)  )* # further okay, if led by a period
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  @  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*    (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                           # initial subdomain
+(?:                                  #
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  \.                        # if led by a period...
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*   (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                     #   ...further okay
+)*
+#       address spec
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  > #                  trailing >
+# name and address
+)  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*                       # optional trailing comment
+/x
+    Alan Other <user\@dom.ain>
+    <user\@dom.ain>
+    user\@dom.ain
+    \"A. Other\" <user.1234\@dom.ain> (a comment)
+    A. Other <user.1234\@dom.ain> (a comment)
+    \"/s=user/ou=host/o=place/prmd=uu.yy/admd= /c=gb/\"\@x400-re.lay
+    A missing angle <user\@some.where
+    *** Failers
+    The quick brown fox
+
+/[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional leading comment
+(?:
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+# Atom
+|                       #  or
+"                                     # "
+[^\\\x80-\xff\n\015"] *                            #   normal
+(?:  \\ [^\x80-\xff]  [^\\\x80-\xff\n\015"] * )*        #   ( special normal* )*
+"                                     #        "
+# Quoted string
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+\.
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+# Atom
+|                       #  or
+"                                     # "
+[^\\\x80-\xff\n\015"] *                            #   normal
+(?:  \\ [^\x80-\xff]  [^\\\x80-\xff\n\015"] * )*        #   ( special normal* )*
+"                                     #        "
+# Quoted string
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# additional words
+)*
+@
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+(?:
+\.
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+)*
+# address
+|                             #  or
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+# Atom
+|                       #  or
+"                                     # "
+[^\\\x80-\xff\n\015"] *                            #   normal
+(?:  \\ [^\x80-\xff]  [^\\\x80-\xff\n\015"] * )*        #   ( special normal* )*
+"                                     #        "
+# Quoted string
+)
+# leading word
+[^()<>@,;:".\\\[\]\x80-\xff\000-\010\012-\037] *               # "normal" atoms and or spaces
+(?:
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+|
+"                                     # "
+[^\\\x80-\xff\n\015"] *                            #   normal
+(?:  \\ [^\x80-\xff]  [^\\\x80-\xff\n\015"] * )*        #   ( special normal* )*
+"                                     #        "
+) # "special" comment or quoted string
+[^()<>@,;:".\\\[\]\x80-\xff\000-\010\012-\037] *            #  more "normal"
+)*
+<
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# <
+(?:
+@
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+(?:
+\.
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+)*
+(?: ,
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+@
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+(?:
+\.
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+)*
+)*  # additional domains
+:
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+)?     #       optional route
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+# Atom
+|                       #  or
+"                                     # "
+[^\\\x80-\xff\n\015"] *                            #   normal
+(?:  \\ [^\x80-\xff]  [^\\\x80-\xff\n\015"] * )*        #   ( special normal* )*
+"                                     #        "
+# Quoted string
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+\.
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+# Atom
+|                       #  or
+"                                     # "
+[^\\\x80-\xff\n\015"] *                            #   normal
+(?:  \\ [^\x80-\xff]  [^\\\x80-\xff\n\015"] * )*        #   ( special normal* )*
+"                                     #        "
+# Quoted string
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# additional words
+)*
+@
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+(?:
+\.
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+)*
+#       address spec
+>                    #                 >
+# name and address
+)
+/x
+    Alan Other <user\@dom.ain>
+    <user\@dom.ain>
+    user\@dom.ain
+    \"A. Other\" <user.1234\@dom.ain> (a comment)
+    A. Other <user.1234\@dom.ain> (a comment)
+    \"/s=user/ou=host/o=place/prmd=uu.yy/admd= /c=gb/\"\@x400-re.lay
+    A missing angle <user\@some.where
+    *** Failers
+    The quick brown fox
+
+/abc\0def\00pqr\000xyz\0000AB/
+    abc\0def\00pqr\000xyz\0000AB
+    abc456 abc\0def\00pqr\000xyz\0000ABCDE
+
+/abc\x0def\x00pqr\x000xyz\x0000AB/
+    abc\x0def\x00pqr\x000xyz\x0000AB
+    abc456 abc\x0def\x00pqr\x000xyz\x0000ABCDE
+
+/^[\000-\037]/
+    \0A
+    \01B
+    \037C
+
+/\0*/
+    \0\0\0\0
+
+/A\x0{2,3}Z/
+    The A\x0\x0Z
+    An A\0\x0\0Z
+    *** Failers
+    A\0Z
+    A\0\x0\0\x0Z
+
+/^(cow|)\1(bell)/
+    cowcowbell
+    bell
+    *** Failers
+    cowbell
+
+/^\s/
+    \040abc
+    \x0cabc
+    \nabc
+    \rabc
+    \tabc
+    *** Failers
+    abc
+
+/^a	b
+  
    c/x
+    abc
+
+/^(a|)\1*b/
+    ab
+    aaaab
+    b
+    *** Failers
+    acb
+
+/^(a|)\1+b/
+    aab
+    aaaab
+    b
+    *** Failers
+    ab
+
+/^(a|)\1?b/
+    ab
+    aab
+    b
+    *** Failers
+    acb
+
+/^(a|)\1{2}b/
+    aaab
+    b
+    *** Failers
+    ab
+    aab
+    aaaab
+
+/^(a|)\1{2,3}b/
+    aaab
+    aaaab
+    b
+    *** Failers
+    ab
+    aab
+    aaaaab
+
+/ab{1,3}bc/
+    abbbbc
+    abbbc
+    abbc
+    *** Failers
+    abc
+    abbbbbc
+
+/([^.]*)\.([^:]*):[T ]+(.*)/
+    track1.title:TBlah blah blah
+
+/([^.]*)\.([^:]*):[T ]+(.*)/i
+    track1.title:TBlah blah blah
+
+/([^.]*)\.([^:]*):[t ]+(.*)/i
+    track1.title:TBlah blah blah
+
+/^[W-c]+$/
+    WXY_^abc
+    ***Failers
+    wxy
+
+/^[W-c]+$/i
+    WXY_^abc
+    wxy_^ABC
+
+/^[\x3f-\x5F]+$/i
+    WXY_^abc
+    wxy_^ABC
+
+/^abc$/m
+    abc
+    qqq\nabc
+    abc\nzzz
+    qqq\nabc\nzzz
+
+/^abc$/
+    abc
+    *** Failers
+    qqq\nabc
+    abc\nzzz
+    qqq\nabc\nzzz
+
+/\Aabc\Z/m
+    abc
+    abc\n 
+    *** Failers
+    qqq\nabc
+    abc\nzzz
+    qqq\nabc\nzzz
+    
+/\A(.)*\Z/s
+    abc\ndef
+
+/\A(.)*\Z/m
+    *** Failers
+    abc\ndef
+
+/(?:b)|(?::+)/
+    b::c
+    c::b
+
+/[-az]+/
+    az-
+    *** Failers
+    b
+
+/[az-]+/
+    za-
+    *** Failers
+    b
+
+/[a\-z]+/
+    a-z
+    *** Failers
+    b
+
+/[a-z]+/
+    abcdxyz
+
+/[\d-]+/
+    12-34
+    *** Failers
+    aaa
+
+/[\d-z]+/
+    12-34z
+    *** Failers
+    aaa
+
+/\x5c/
+    \\
+
+/\x20Z/
+    the Zoo
+    *** Failers
+    Zulu
+
+/(abc)\1/i
+    abcabc
+    ABCabc
+    abcABC
+
+/(main(O)?)+/
+    mainmain
+    mainOmain
+
+/ab{3cd/
+    ab{3cd
+
+/ab{3,cd/
+    ab{3,cd
+
+/ab{3,4a}cd/
+    ab{3,4a}cd
+
+/{4,5a}bc/
+    {4,5a}bc
+
+/^a.b/
+    a\rb
+    *** Failers
+    a\nb
+
+/abc$/
+    abc
+    abc\n
+    *** Failers
+    abc\ndef
+
+/(abc)\123/
+    abc\x53
+
+/(abc)\223/
+    abc\x93
+
+/(abc)\323/
+    abc\xd3
+
+/(abc)\500/
+    abc\x40
+    abc\100
+
+/(abc)\5000/
+    abc\x400
+    abc\x40\x30
+    abc\1000
+    abc\100\x30
+    abc\100\060
+    abc\100\60
+
+/abc\81/
+    abc\081
+    abc\0\x38\x31
+
+/abc\91/
+    abc\091
+    abc\0\x39\x31
+
+/(a)(b)(c)(d)(e)(f)(g)(h)(i)(j)(k)(l)\12\123/
+    abcdefghijkllS
+
+/(a)(b)(c)(d)(e)(f)(g)(h)(i)(j)(k)\12\123/
+    abcdefghijk\12S
+
+/ab\gdef/
+    abgdef
+
+/a{0}bc/
+    bc
+
+/(a|(bc)){0,0}?xyz/
+    xyz
+
+/abc[\10]de/
+    abc\010de
+
+/abc[\1]de/
+    abc\1de
+
+/(abc)[\1]de/
+    abc\1de
+
+/a.b(?s)/
+    a\nb
+
+/^([^a])([^\b])([^c]*)([^d]{3,4})/
+    baNOTccccd
+    baNOTcccd
+    baNOTccd
+    bacccd
+    *** Failers
+    anything
+    b\bc   
+    baccd
+
+/[^a]/
+    Abc
+  
+/[^a]/i
+    Abc 
+
+/[^a]+/
+    AAAaAbc
+  
+/[^a]+/i
+    AAAaAbc 
+
+/[^a]+/
+    bbb\nccc
+   
+/[^k]$/
+    abc
+    *** Failers
+    abk   
+   
+/[^k]{2,3}$/
+    abc
+    kbc
+    kabc 
+    *** Failers
+    abk
+    akb
+    akk 
+
+/^\d{8,}\@.+[^k]$/
+    12345678\@a.b.c.d
+    123456789\@x.y.z
+    *** Failers
+    12345678\@x.y.uk
+    1234567\@a.b.c.d       
+
+/(a)\1{8,}/
+    aaaaaaaaa
+    aaaaaaaaaa
+    *** Failers
+    aaaaaaa   
+
+/[^a]/
+    aaaabcd
+    aaAabcd 
+
+/[^a]/i
+    aaaabcd
+    aaAabcd 
+
+/[^az]/
+    aaaabcd
+    aaAabcd 
+
+/[^az]/i
+    aaaabcd
+    aaAabcd 
+
+/\000\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037\040\041\042\043\044\045\046\047\050\051\052\053\054\055\056\057\060\061\062\063\064\065\066\067\070\071\072\073\074\075\076\077\100\101\102\103\104\105\106\107\110\111\112\113\114\115\116\117\120\121\122\123\124\125\126\127\130\131\132\133\134\135\136\137\140\141\142\143\144\145\146\147\150\151\152\153\154\155\156\157\160\161\162\163\164\165\166\167\170\171\172\173\174\175\176\177\200\201\202\203\204\205\206\207\210\211\212\213\214\215\216\217\220\221\222\223\224\225\226\227\230\231\232\233\234\235\236\237\240\241\242\243\244\245\246\247\250\251\252\253\254\255\256\257\260\261\262\263\264\265\266\267\270\271\272\273\274\275\276\277\300\301\302\303\304\305\306\307\310\311\312\313\314\315\316\317\320\321\322\323\324\325\326\327\330\331\332\333\334\335\336\337\340\341\342\343\344\345\346\347\350\351\352\353\354\355\356\357\360\361\362\363\364\365\366\367\370\371\372\373\374\375\376\377/
+ \000\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037\040\041\042\043\044\045\046\047\050\051\052\053\054\055\056\057\060\061\062\063\064\065\066\067\070\071\072\073\074\075\076\077\100\101\102\103\104\105\106\107\110\111\112\113\114\115\116\117\120\121\122\123\124\125\126\127\130\131\132\133\134\135\136\137\140\141\142\143\144\145\146\147\150\151\152\153\154\155\156\157\160\161\162\163\164\165\166\167\170\171\172\173\174\175\176\177\200\201\202\203\204\205\206\207\210\211\212\213\214\215\216\217\220\221\222\223\224\225\226\227\230\231\232\233\234\235\236\237\240\241\242\243\244\245\246\247\250\251\252\253\254\255\256\257\260\261\262\263\264\265\266\267\270\271\272\273\274\275\276\277\300\301\302\303\304\305\306\307\310\311\312\313\314\315\316\317\320\321\322\323\324\325\326\327\330\331\332\333\334\335\336\337\340\341\342\343\344\345\346\347\350\351\352\353\354\355\356\357\360\361\362\363\364\365\366\367\370\371\372\373\374\375\376\377
+
+/P[^*]TAIRE[^*]{1,6}?LL/
+    xxxxxxxxxxxPSTAIREISLLxxxxxxxxx
+
+/P[^*]TAIRE[^*]{1,}?LL/
+    xxxxxxxxxxxPSTAIREISLLxxxxxxxxx
+
+/(\.\d\d[1-9]?)\d+/
+    1.230003938
+    1.875000282   
+    1.235  
+                  
+/(\.\d\d((?=0)|\d(?=\d)))/
+    1.230003938      
+    1.875000282
+    *** Failers 
+    1.235 
+    
+/a(?)b/
+    ab 
+ 
+/\b(foo)\s+(\w+)/i
+    Food is on the foo table
+    
+/foo(.*)bar/
+    The food is under the bar in the barn.
+    
+/foo(.*?)bar/  
+    The food is under the bar in the barn.
+
+/(.*)(\d*)/
+    I have 2 numbers: 53147
+    
+/(.*)(\d+)/
+    I have 2 numbers: 53147
+ 
+/(.*?)(\d*)/
+    I have 2 numbers: 53147
+
+/(.*?)(\d+)/
+    I have 2 numbers: 53147
+
+/(.*)(\d+)$/
+    I have 2 numbers: 53147
+
+/(.*?)(\d+)$/
+    I have 2 numbers: 53147
+
+/(.*)\b(\d+)$/
+    I have 2 numbers: 53147
+
+/(.*\D)(\d+)$/
+    I have 2 numbers: 53147
+
+/^\D*(?!123)/
+    ABC123
+     
+/^(\D*)(?=\d)(?!123)/
+    ABC445
+    *** Failers
+    ABC123
+    
+/^[W-]46]/
+    W46]789 
+    -46]789
+    *** Failers
+    Wall
+    Zebra
+    42
+    [abcd] 
+    ]abcd[
+       
+/^[W-\]46]/
+    W46]789 
+    Wall
+    Zebra
+    Xylophone  
+    42
+    [abcd] 
+    ]abcd[
+    \\backslash 
+    *** Failers
+    -46]789
+    well
+    
+/\d\d\/\d\d\/\d\d\d\d/
+    01/01/2000
+
+/word (?:[a-zA-Z0-9]+ ){0,10}otherword/
+  word cat dog elephant mussel cow horse canary baboon snake shark otherword
+  word cat dog elephant mussel cow horse canary baboon snake shark
+
+/word (?:[a-zA-Z0-9]+ ){0,300}otherword/
+  word cat dog elephant mussel cow horse canary baboon snake shark the quick brown fox and the lazy dog and several other words getting close to thirty by now I hope
+
+/^(a){0,0}/
+    bcd
+    abc
+    aab     
+
+/^(a){0,1}/
+    bcd
+    abc
+    aab  
+
+/^(a){0,2}/
+    bcd
+    abc
+    aab  
+
+/^(a){0,3}/
+    bcd
+    abc
+    aab
+    aaa   
+
+/^(a){0,}/
+    bcd
+    abc
+    aab
+    aaa
+    aaaaaaaa    
+
+/^(a){1,1}/
+    bcd
+    abc
+    aab  
+
+/^(a){1,2}/
+    bcd
+    abc
+    aab  
+
+/^(a){1,3}/
+    bcd
+    abc
+    aab
+    aaa   
+
+/^(a){1,}/
+    bcd
+    abc
+    aab
+    aaa
+    aaaaaaaa    
+
+/.*\.gif/
+    borfle\nbib.gif\nno
+
+/.{0,}\.gif/
+    borfle\nbib.gif\nno
+
+/.*\.gif/m
+    borfle\nbib.gif\nno
+
+/.*\.gif/s
+    borfle\nbib.gif\nno
+
+/.*\.gif/ms
+    borfle\nbib.gif\nno
+    
+/.*$/
+    borfle\nbib.gif\nno
+
+/.*$/m
+    borfle\nbib.gif\nno
+
+/.*$/s
+    borfle\nbib.gif\nno
+
+/.*$/ms
+    borfle\nbib.gif\nno
+    
+/.*$/
+    borfle\nbib.gif\nno\n
+
+/.*$/m
+    borfle\nbib.gif\nno\n
+
+/.*$/s
+    borfle\nbib.gif\nno\n
+
+/.*$/ms
+    borfle\nbib.gif\nno\n
+    
+/(.*X|^B)/
+    abcde\n1234Xyz
+    BarFoo 
+    *** Failers
+    abcde\nBar  
+
+/(.*X|^B)/m
+    abcde\n1234Xyz
+    BarFoo 
+    abcde\nBar  
+
+/(.*X|^B)/s
+    abcde\n1234Xyz
+    BarFoo 
+    *** Failers
+    abcde\nBar  
+
+/(.*X|^B)/ms
+    abcde\n1234Xyz
+    BarFoo 
+    abcde\nBar  
+
+/(?s)(.*X|^B)/
+    abcde\n1234Xyz
+    BarFoo 
+    *** Failers 
+    abcde\nBar  
+
+/(?s:.*X|^B)/
+    abcde\n1234Xyz
+    BarFoo 
+    *** Failers 
+    abcde\nBar  
+
+/^.*B/
+    **** Failers
+    abc\nB
+     
+/(?s)^.*B/
+    abc\nB
+
+/(?m)^.*B/
+    abc\nB
+     
+/(?ms)^.*B/
+    abc\nB
+
+/(?ms)^B/
+    abc\nB
+
+/(?s)B$/
+    B\n
+
+/^[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]/
+    123456654321
+  
+/^\d\d\d\d\d\d\d\d\d\d\d\d/
+    123456654321 
+
+/^[\d][\d][\d][\d][\d][\d][\d][\d][\d][\d][\d][\d]/
+    123456654321
+  
+/^[abc]{12}/
+    abcabcabcabc
+    
+/^[a-c]{12}/
+    abcabcabcabc
+    
+/^(a|b|c){12}/
+    abcabcabcabc 
+
+/^[abcdefghijklmnopqrstuvwxy0123456789]/
+    n
+    *** Failers 
+    z 
+
+/abcde{0,0}/
+    abcd
+    *** Failers
+    abce  
+
+/ab[cd]{0,0}e/
+    abe
+    *** Failers
+    abcde 
+    
+/ab(c){0,0}d/
+    abd
+    *** Failers
+    abcd   
+
+/a(b*)/
+    a
+    ab
+    abbbb
+    *** Failers
+    bbbbb    
+    
+/ab\d{0}e/
+    abe
+    *** Failers
+    ab1e   
+    
+/"([^\\"]+|\\.)*"/
+    the \"quick\" brown fox
+    \"the \\\"quick\\\" brown fox\" 
+
+/.*?/g+
+    abc
+  
+/\b/g+
+    abc 
+
+/\b/+g
+    abc 
+
+//g
+    abc
+
+/ End of test input /
diff --git a/srclib/pcre/testdata/testinput2 b/srclib/pcre/testdata/testinput2
new file mode 100644
index 0000000000..1d9504cec2
--- /dev/null
+++ b/srclib/pcre/testdata/testinput2
@@ -0,0 +1,710 @@
+/(a)b|/
+
+/abc/
+    abc
+    defabc
+    \Aabc
+    *** Failers
+    \Adefabc
+    ABC
+
+/^abc/
+    abc
+    \Aabc
+    *** Failers
+    defabc
+    \Adefabc
+
+/a+bc/
+
+/a*bc/
+
+/a{3}bc/
+
+/(abc|a+z)/
+
+/^abc$/
+    abc
+    *** Failers
+    def\nabc
+
+/ab\gdef/X
+
+/(?X)ab\gdef/X
+
+/x{5,4}/
+
+/z{65536}/
+
+/[abcd/
+
+/[\B]/
+
+/[a-\w]/
+
+/[z-a]/
+
+/^*/
+
+/(abc/
+
+/(?# abc/
+
+/(?z)abc/
+
+/.*b/
+
+/.*?b/
+
+/cat|dog|elephant/
+    this sentence eventually mentions a cat
+    this sentences rambles on and on for a while and then reaches elephant
+
+/cat|dog|elephant/S
+    this sentence eventually mentions a cat
+    this sentences rambles on and on for a while and then reaches elephant
+
+/cat|dog|elephant/iS
+    this sentence eventually mentions a CAT cat
+    this sentences rambles on and on for a while to elephant ElePhant
+
+/a|[bcd]/S
+
+/(a|[^\dZ])/S
+
+/(a|b)*[\s]/S
+
+/(ab\2)/
+
+/{4,5}abc/
+
+/(a)(b)(c)\2/
+    abcb
+    \O0abcb
+    \O3abcb
+    \O6abcb
+    \O9abcb
+    \O12abcb 
+
+/(a)bc|(a)(b)\2/
+    abc
+    \O0abc
+    \O3abc
+    \O6abc
+    aba
+    \O0aba
+    \O3aba
+    \O6aba
+    \O9aba
+    \O12aba
+
+/abc$/E
+    abc
+    *** Failers
+    abc\n
+    abc\ndef
+
+/(a)(b)(c)(d)(e)\6/
+
+/the quick brown fox/
+    the quick brown fox
+    this is a line with the quick brown fox
+
+/the quick brown fox/A
+    the quick brown fox
+    *** Failers
+    this is a line with the quick brown fox
+
+/ab(?z)cd/
+
+/^abc|def/
+    abcdef
+    abcdef\B
+
+/.*((abc)$|(def))/
+    defabc
+    \Zdefabc
+
+/abc/P
+    abc
+    *** Failers
+    
+/^abc|def/P
+    abcdef
+    abcdef\B
+
+/.*((abc)$|(def))/P
+    defabc
+    \Zdefabc
+  
+/the quick brown fox/P
+    the quick brown fox
+    *** Failers 
+    The Quick Brown Fox 
+
+/the quick brown fox/Pi
+    the quick brown fox
+    The Quick Brown Fox 
+
+/abc.def/P
+    *** Failers
+    abc\ndef
+    
+/abc$/P
+    abc
+    abc\n 
+
+/(abc)\2/P
+
+/(abc\1)/P
+    abc
+
+/)/
+
+/a[]b/
+
+/[^aeiou ]{3,}/
+    co-processors, and for 
+    
+/<.*>/
+    abc<def>ghi<klm>nop
+
+/<.*?>/
+    abc<def>ghi<klm>nop
+
+/<.*>/U
+    abc<def>ghi<klm>nop
+    
+/<.*>(?U)/
+    abc<def>ghi<klm>nop
+
+/<.*?>/U
+    abc<def>ghi<klm>nop
+    
+/={3,}/U
+    abc========def
+    
+/(?U)={3,}?/
+    abc========def
+    
+/(?<!bar|cattle)foo/
+    foo
+    catfoo 
+    *** Failers
+    the barfoo
+    and cattlefoo   
+
+/(?<=a+)b/
+
+/(?<=aaa|b{0,3})b/
+
+/(?<!(foo)a\1)bar/
+
+/(?i)abc/
+
+/(a|(?m)a)/
+
+/(?i)^1234/
+
+/(^b|(?i)^d)/
+
+/(?s).*/
+
+/[abcd]/S
+
+/(?i)[abcd]/S
+
+/(?m)[xy]|(b|c)/S
+
+/(^a|^b)/m
+
+/(?i)(^a|^b)/m
+
+/(a)(?(1)a|b|c)/
+
+/(?(?=a)a|b|c)/
+
+/(?(1a)/
+
+/(?(?i))/
+
+/(?(abc))/
+
+/(?(?<ab))/
+
+/((?s)blah)\s+\1/
+
+/((?i)blah)\s+\1/
+
+/((?i)b)/DS
+
+/(a*b|(?i:c*(?-i)d))/S
+
+/a$/
+    a
+    a\n
+    *** Failers 
+    \Za
+    \Za\n   
+
+/a$/m
+    a
+    a\n
+    \Za\n   
+    *** Failers 
+    \Za
+    
+/\Aabc/m
+
+/^abc/m 
+
+/^((a+)(?U)([ab]+)(?-U)([bc]+)(\w*))/
+  aaaaabbbbbcccccdef
+
+/(?<=foo)[ab]/S
+
+/(?<!foo)(alpha|omega)/S
+
+/(?!alphabet)[ab]/S
+
+/(?<=foo\n)^bar/m
+
+/(?>^abc)/m
+    abc
+    def\nabc
+    *** Failers
+    defabc   
+
+/(?<=ab(c+)d)ef/
+
+/(?<=ab(?<=c+)d)ef/
+
+/(?<=ab(c|de)f)g/
+
+/The next three are in testinput2 because they have variable length branches/
+
+/(?<=bullock|donkey)-cart/
+    the bullock-cart
+    a donkey-cart race
+    *** Failers
+    cart
+    horse-and-cart    
+      
+/(?<=ab(?i)x|y|z)/
+
+/(?>.*)(?<=(abcd)|(xyz))/
+    alphabetabcd
+    endingxyz
+
+/(?<=ab(?i)x(?-i)y|(?i)z|b)ZZ/
+    abxyZZ
+    abXyZZ
+    ZZZ
+    zZZ
+    bZZ
+    BZZ     
+    *** Failers
+    ZZ 
+    abXYZZ 
+    zzz
+    bzz  
+
+/(?<!(foo)a)bar/
+    bar
+    foobbar 
+    *** Failers
+    fooabar  
+
+/This one is here because Perl 5.005_02 doesn't fail it/
+
+/^(a)?(?(1)a|b)+$/
+    *** Failers
+    a 
+
+/This one is here because I think Perl 5.005_02 gets the setting of $1 wrong/
+
+/^(a\1?){4}$/
+    aaaaaa
+    
+/These are syntax tests from Perl 5.005/
+
+/a[b-a]/
+
+/a[]b/
+
+/a[/
+
+/*a/
+
+/(*)b/
+
+/abc)/
+
+/(abc/
+
+/a**/
+
+/)(/
+
+/\1/
+
+/\2/
+
+/(a)|\2/
+
+/a[b-a]/i
+
+/a[]b/i
+
+/a[/i
+
+/*a/i
+
+/(*)b/i
+
+/abc)/i
+
+/(abc/i
+
+/a**/i
+
+/)(/i
+
+/:(?:/
+
+/(?<%)b/
+
+/a(?{)b/
+
+/a(?{{})b/
+
+/a(?{}})b/
+
+/a(?{"{"})b/
+
+/a(?{"{"}})b/
+
+/(?(1?)a|b)/
+
+/(?(1)a|b|c)/
+
+/[a[:xyz:/
+
+/(?<=x+)y/
+
+/a{37,17}/
+
+/abc/\
+
+/abc/\P
+
+/abc/\i
+
+/(a)bc(d)/
+    abcd
+    abcd\C2
+    abcd\C5
+     
+/(.{20})/
+    abcdefghijklmnopqrstuvwxyz
+    abcdefghijklmnopqrstuvwxyz\C1
+    abcdefghijklmnopqrstuvwxyz\G1
+     
+/(.{15})/
+    abcdefghijklmnopqrstuvwxyz
+    abcdefghijklmnopqrstuvwxyz\C1\G1
+
+/(.{16})/
+    abcdefghijklmnopqrstuvwxyz
+    abcdefghijklmnopqrstuvwxyz\C1\G1\L
+    
+/^(a|(bc))de(f)/
+    adef\G1\G2\G3\G4\L 
+    bcdef\G1\G2\G3\G4\L 
+    adefghijk\C0 
+    
+/^abc\00def/
+    abc\00def\L\C0 
+    
+/word ((?:[a-zA-Z0-9]+ )((?:[a-zA-Z0-9]+ )((?:[a-zA-Z0-9]+ )((?:[a-zA-Z0-9]+ 
+)((?:[a-zA-Z0-9]+ )((?:[a-zA-Z0-9]+ )((?:[a-zA-Z0-9]+ )((?:[a-zA-Z0-9]+ 
+)?)?)?)?)?)?)?)?)?otherword/M
+
+/.*X/D
+
+/.*X/Ds
+
+/(.*X|^B)/D
+
+/(.*X|^B)/Ds
+    
+/(?s)(.*X|^B)/D
+
+/(?s:.*X|^B)/D
+
+/\Biss\B/+
+    Mississippi
+
+/\Biss\B/+P
+    Mississippi
+
+/iss/G+
+    Mississippi
+
+/\Biss\B/G+
+    Mississippi
+
+/\Biss\B/g+
+    Mississippi
+    *** Failers
+    Mississippi\A
+
+/(?<=[Ms])iss/g+
+    Mississippi
+
+/(?<=[Ms])iss/G+
+    Mississippi
+
+/^iss/g+
+    ississippi
+    
+/.*iss/g+
+    abciss\nxyzisspqr 
+
+/.i./+g
+    Mississippi
+    Mississippi\A
+    Missouri river
+    Missouri river\A  
+
+/^.is/+g
+    Mississippi
+
+/^ab\n/g+
+    ab\nab\ncd
+
+/^ab\n/mg+
+    ab\nab\ncd
+
+/abc/
+
+/abc|bac/
+
+/(abc|bac)/
+
+/(abc|(c|dc))/
+
+/(abc|(d|de)c)/
+
+/a*/
+
+/a+/
+
+/(baa|a+)/
+
+/a{0,3}/
+
+/baa{3,}/
+
+/"([^\\"]+|\\.)*"/
+
+/(abc|ab[cd])/
+
+/(a|.)/
+
+/a|ba|\w/
+
+/abc(?=pqr)/
+
+/...(?<=abc)/
+
+/abc(?!pqr)/
+
+/ab./
+
+/ab[xyz]/
+
+/abc*/
+
+/ab.c*/
+
+/a.c*/
+
+/.c*/
+
+/ac*/
+
+/(a.c*|b.c*)/
+
+/a.c*|aba/
+
+/.+a/
+
+/(?=abcda)a.*/
+
+/(?=a)a.*/
+
+/a(b)*/
+
+/a\d*/
+
+/ab\d*/
+
+/a(\d)*/
+
+/abcde{0,0}/
+
+/ab\d+/
+
+/a(?(1)b)/
+
+/a(?(1)bag|big)/
+
+/a(?(1)bag|big)*/
+
+/a(?(1)bag|big)+/
+
+/a(?(1)b..|b..)/
+
+/ab\d{0}e/
+
+/a?b?/
+    a
+    b
+    ab
+    \
+    *** Failers
+    \N     
+    
+/|-/
+    abcd
+    -abc
+    \Nab-c
+    *** Failers
+    \Nabc     
+
+/a*(b+)(z)(z)/P
+    aaaabbbbzzzz
+    aaaabbbbzzzz\O0
+    aaaabbbbzzzz\O1
+    aaaabbbbzzzz\O2
+    aaaabbbbzzzz\O3
+    aaaabbbbzzzz\O4
+    aaaabbbbzzzz\O5
+    
+/^.?abcd/S 
+
+/\(             # ( at start
+  (?:           # Non-capturing bracket
+  (?>[^()]+)    # Either a sequence of non-brackets (no backtracking)
+  |             # Or
+  (?R)          # Recurse - i.e. nested bracketed string
+  )*            # Zero or more contents
+  \)            # Closing )
+  /x
+    (abcd)
+    (abcd)xyz
+    xyz(abcd)
+    (ab(xy)cd)pqr 
+    (ab(xycd)pqr 
+    () abc () 
+    12(abcde(fsh)xyz(foo(bar))lmno)89
+    *** Failers
+    abcd 
+    abcd)
+    (abcd  
+
+/\(  ( (?>[^()]+) | (?R) )* \) /xg
+    (ab(xy)cd)pqr 
+    1(abcd)(x(y)z)pqr
+
+/\(  (?: (?>[^()]+) | (?R) ) \) /x
+    (abcd)
+    (ab(xy)cd)
+    (a(b(c)d)e) 
+    ((ab)) 
+    *** Failers
+    ()   
+
+/\(  (?: (?>[^()]+) | (?R) )? \) /x
+    ()
+    12(abcde(fsh)xyz(foo(bar))lmno)89
+
+/\(  ( (?>[^()]+) | (?R) )* \) /x
+    (ab(xy)cd)
+
+/\( ( ( (?>[^()]+) | (?R) )* ) \) /x
+    (ab(xy)cd)
+
+/\( (123)? ( ( (?>[^()]+) | (?R) )* ) \) /x
+    (ab(xy)cd)
+    (123ab(xy)cd)
+
+/\( ( (123)? ( (?>[^()]+) | (?R) )* ) \) /x
+    (ab(xy)cd)
+    (123ab(xy)cd)
+
+/\( (((((((((( ( (?>[^()]+) | (?R) )* )))))))))) \) /x
+    (ab(xy)cd)
+
+/\( ( ( (?>[^()<>]+) | ((?>[^()]+)) | (?R) )* ) \) /x
+    (abcd(xyz<p>qrs)123)
+
+/\( ( ( (?>[^()]+) | ((?R)) )* ) \) /x
+    (ab(cd)ef)
+    (ab(cd(ef)gh)ij)
+
+/^[[:alnum:]]/D
+
+/^[[:alpha:]]/D
+             
+/^[[:ascii:]]/D
+
+/^[[:cntrl:]]/D
+
+/^[[:digit:]]/D
+
+/^[[:graph:]]/D
+
+/^[[:lower:]]/D
+
+/^[[:print:]]/D
+
+/^[[:punct:]]/D
+
+/^[[:space:]]/D
+
+/^[[:upper:]]/D
+
+/^[[:xdigit:]]/D
+
+/^[[:word:]]/D
+
+/^[[:^cntrl:]]/D
+
+/^[12[:^digit:]]/D
+
+/[01[:alpha:]%]/D
+
+/[[.ch.]]/
+
+/[[=ch=]]/
+
+/[[:rhubarb:]]/
+
+/[[:upper:]]/i
+    A
+    a 
+    
+/[[:lower:]]/i
+    A
+    a 
+
+/((?-i)[[:lower:]])[[:lower:]]/i
+    ab
+    aB
+    *** Failers
+    Ab
+    AB        
+
+/ End of test input /
diff --git a/srclib/pcre/testdata/testinput3 b/srclib/pcre/testdata/testinput3
new file mode 100644
index 0000000000..0c884d3b7c
--- /dev/null
+++ b/srclib/pcre/testdata/testinput3
@@ -0,0 +1,1692 @@
+/(?<!bar)foo/
+    foo
+    catfood
+    arfootle
+    rfoosh
+    *** Failers
+    barfoo
+    towbarfoo
+
+/\w{3}(?<!bar)foo/
+    catfood
+    *** Failers
+    foo
+    barfoo
+    towbarfoo
+
+/(?<=(foo)a)bar/
+    fooabar
+    *** Failers
+    bar
+    foobbar
+      
+/\Aabc\z/m
+    abc
+    *** Failers
+    abc\n   
+    qqq\nabc
+    abc\nzzz
+    qqq\nabc\nzzz
+
+"(?>.*/)foo"
+    /this/is/a/very/long/line/in/deed/with/very/many/slashes/in/it/you/see/
+
+"(?>.*/)foo"
+    /this/is/a/very/long/line/in/deed/with/very/many/slashes/in/and/foo
+
+/(?>(\.\d\d[1-9]?))\d+/
+    1.230003938
+    1.875000282
+    *** Failers 
+    1.235 
+
+/^((?>\w+)|(?>\s+))*$/
+    now is the time for all good men to come to the aid of the party
+    *** Failers
+    this is not a line with only words and spaces!
+    
+/(\d+)(\w)/
+    12345a
+    12345+ 
+
+/((?>\d+))(\w)/
+    12345a
+    *** Failers
+    12345+ 
+
+/(?>a+)b/
+    aaab
+
+/((?>a+)b)/
+    aaab
+
+/(?>(a+))b/
+    aaab
+
+/(?>b)+/
+    aaabbbccc
+
+/(?>a+|b+|c+)*c/
+    aaabbbbccccd
+
+/((?>[^()]+)|\([^()]*\))+/
+    ((abc(ade)ufh()()x
+    
+/\(((?>[^()]+)|\([^()]+\))+\)/ 
+    (abc)
+    (abc(def)xyz)
+    *** Failers
+    ((()aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa   
+
+/a(?-i)b/i
+    ab
+    *** Failers 
+    Ab
+    aB
+    AB
+        
+/(a (?x)b c)d e/
+    a bcd e
+    *** Failers
+    a b cd e
+    abcd e   
+    a bcde 
+ 
+/(a b(?x)c d (?-x)e f)/
+    a bcde f
+    *** Failers
+    abcdef  
+
+/(a(?i)b)c/
+    abc
+    aBc
+    *** Failers
+    abC
+    aBC  
+    Abc
+    ABc
+    ABC
+    AbC
+    
+/a(?i:b)c/
+    abc
+    aBc
+    *** Failers 
+    ABC
+    abC
+    aBC
+    
+/a(?i:b)*c/
+    aBc
+    aBBc
+    *** Failers 
+    aBC
+    aBBC
+    
+/a(?=b(?i)c)\w\wd/
+    abcd
+    abCd
+    *** Failers
+    aBCd
+    abcD     
+    
+/(?s-i:more.*than).*million/i
+    more than million
+    more than MILLION
+    more \n than Million 
+    *** Failers
+    MORE THAN MILLION    
+    more \n than \n million 
+
+/(?:(?s-i)more.*than).*million/i
+    more than million
+    more than MILLION
+    more \n than Million 
+    *** Failers
+    MORE THAN MILLION    
+    more \n than \n million 
+    
+/(?>a(?i)b+)+c/ 
+    abc
+    aBbc
+    aBBc 
+    *** Failers
+    Abc
+    abAb    
+    abbC 
+    
+/(?=a(?i)b)\w\wc/
+    abc
+    aBc
+    *** Failers
+    Ab 
+    abC
+    aBC     
+    
+/(?<=a(?i)b)(\w\w)c/
+    abxxc
+    aBxxc
+    *** Failers
+    Abxxc
+    ABxxc
+    abxxC      
+
+/(?:(a)|b)(?(1)A|B)/
+    aA
+    bB
+    *** Failers
+    aB
+    bA    
+
+/^(a)?(?(1)a|b)+$/
+    aa
+    b
+    bb  
+    *** Failers
+    ab   
+
+/^(?(?=abc)\w{3}:|\d\d)$/
+    abc:
+    12
+    *** Failers
+    123
+    xyz    
+
+/^(?(?!abc)\d\d|\w{3}:)$/
+    abc:
+    12
+    *** Failers
+    123
+    xyz    
+    
+/(?(?<=foo)bar|cat)/
+    foobar
+    cat
+    fcat
+    focat   
+    *** Failers
+    foocat  
+
+/(?(?<!foo)cat|bar)/
+    foobar
+    cat
+    fcat
+    focat   
+    *** Failers
+    foocat  
+
+/( \( )? [^()]+ (?(1) \) |) /x
+    abcd
+    (abcd)
+    the quick (abcd) fox
+    (abcd   
+
+/( \( )? [^()]+ (?(1) \) ) /x
+    abcd
+    (abcd)
+    the quick (abcd) fox
+    (abcd   
+
+/^(?(2)a|(1)(2))+$/
+    12
+    12a
+    12aa
+    *** Failers
+    1234    
+
+/((?i)blah)\s+\1/
+    blah blah
+    BLAH BLAH
+    Blah Blah
+    blaH blaH
+    *** Failers
+    blah BLAH
+    Blah blah      
+    blaH blah 
+
+/((?i)blah)\s+(?i:\1)/
+    blah blah
+    BLAH BLAH
+    Blah Blah
+    blaH blaH
+    blah BLAH
+    Blah blah      
+    blaH blah 
+
+/(?>a*)*/
+    a
+    aa
+    aaaa
+    
+/(abc|)+/
+    abc
+    abcabc
+    abcabcabc
+    xyz      
+
+/([a]*)*/
+    a
+    aaaaa 
+ 
+/([ab]*)*/
+    a
+    b
+    ababab
+    aaaabcde
+    bbbb    
+ 
+/([^a]*)*/
+    b
+    bbbb
+    aaa   
+ 
+/([^ab]*)*/
+    cccc
+    abab  
+ 
+/([a]*?)*/
+    a
+    aaaa 
+ 
+/([ab]*?)*/
+    a
+    b
+    abab
+    baba   
+ 
+/([^a]*?)*/
+    b
+    bbbb
+    aaa   
+ 
+/([^ab]*?)*/
+    c
+    cccc
+    baba   
+ 
+/(?>a*)*/
+    a
+    aaabcde 
+ 
+/((?>a*))*/
+    aaaaa
+    aabbaa 
+ 
+/((?>a*?))*/
+    aaaaa
+    aabbaa 
+
+/(?(?=[^a-z]+[a-z])  \d{2}-[a-z]{3}-\d{2}  |  \d{2}-\d{2}-\d{2} ) /x
+    12-sep-98
+    12-09-98
+    *** Failers
+    sep-12-98
+        
+/(?<=(foo))bar\1/
+    foobarfoo
+    foobarfootling 
+    *** Failers
+    foobar
+    barfoo   
+
+/(?i:saturday|sunday)/
+    saturday
+    sunday
+    Saturday
+    Sunday
+    SATURDAY
+    SUNDAY
+    SunDay
+    
+/(a(?i)bc|BB)x/
+    abcx
+    aBCx
+    bbx
+    BBx
+    *** Failers
+    abcX
+    aBCX
+    bbX
+    BBX               
+
+/^([ab](?i)[cd]|[ef])/
+    ac
+    aC
+    bD
+    elephant
+    Europe 
+    frog
+    France
+    *** Failers
+    Africa     
+
+/^(ab|a(?i)[b-c](?m-i)d|x(?i)y|z)/
+    ab
+    aBd
+    xy
+    xY
+    zebra
+    Zambesi
+    *** Failers
+    aCD  
+    XY  
+
+/(?<=foo\n)^bar/m
+    foo\nbar
+    *** Failers
+    bar
+    baz\nbar   
+
+/(?<=(?<!foo)bar)baz/
+    barbaz
+    barbarbaz 
+    koobarbaz 
+    *** Failers
+    baz
+    foobarbaz 
+
+/The case of aaaaaa is missed out below because I think Perl 5.005_02 gets/
+/it wrong; it sets $1 to aaa rather than aa. Compare the following test,/
+/where it does set $1 to aa when matching aaaaaa./
+
+/^(a\1?){4}$/
+    a
+    aa
+    aaa
+    aaaa
+    aaaaa
+    aaaaaaa
+    aaaaaaaa
+    aaaaaaaaa
+    aaaaaaaaaa
+    aaaaaaaaaaa
+    aaaaaaaaaaaa
+    aaaaaaaaaaaaa
+    aaaaaaaaaaaaaa
+    aaaaaaaaaaaaaaa
+    aaaaaaaaaaaaaaaa               
+
+/^(a\1?)(a\1?)(a\2?)(a\3?)$/
+    a
+    aa
+    aaa
+    aaaa
+    aaaaa
+    aaaaaa
+    aaaaaaa
+    aaaaaaaa
+    aaaaaaaaa
+    aaaaaaaaaa
+    aaaaaaaaaaa
+    aaaaaaaaaaaa
+    aaaaaaaaaaaaa
+    aaaaaaaaaaaaaa
+    aaaaaaaaaaaaaaa
+    aaaaaaaaaaaaaaaa               
+
+/The following tests are taken from the Perl 5.005 test suite; some of them/
+/are compatible with 5.004, but I'd rather not have to sort them out./
+
+/abc/
+    abc
+    xabcy
+    ababc
+    *** Failers
+    xbc
+    axc
+    abx
+
+/ab*c/
+    abc
+
+/ab*bc/
+    abc
+    abbc
+    abbbbc
+
+/.{1}/
+    abbbbc
+
+/.{3,4}/
+    abbbbc
+
+/ab{0,}bc/
+    abbbbc
+
+/ab+bc/
+    abbc
+    *** Failers
+    abc
+    abq
+
+/ab{1,}bc/
+
+/ab+bc/
+    abbbbc
+
+/ab{1,}bc/
+    abbbbc
+
+/ab{1,3}bc/
+    abbbbc
+
+/ab{3,4}bc/
+    abbbbc
+
+/ab{4,5}bc/
+    *** Failers
+    abq
+    abbbbc
+
+/ab?bc/
+    abbc
+    abc
+
+/ab{0,1}bc/
+    abc
+
+/ab?bc/
+
+/ab?c/
+    abc
+
+/ab{0,1}c/
+    abc
+
+/^abc$/
+    abc
+    *** Failers
+    abbbbc
+    abcc
+
+/^abc/
+    abcc
+
+/^abc$/
+
+/abc$/
+    aabc
+    *** Failers
+    aabc
+    aabcd
+
+/^/
+    abc
+
+/$/
+    abc
+
+/a.c/
+    abc
+    axc
+
+/a.*c/
+    axyzc
+
+/a[bc]d/
+    abd
+    *** Failers
+    axyzd
+    abc
+
+/a[b-d]e/
+    ace
+
+/a[b-d]/
+    aac
+
+/a[-b]/
+    a-
+
+/a[b-]/
+    a-
+
+/a]/
+    a]
+
+/a[]]b/
+    a]b
+
+/a[^bc]d/
+    aed
+    *** Failers
+    abd
+    abd
+
+/a[^-b]c/
+    adc
+
+/a[^]b]c/
+    adc
+    *** Failers
+    a-c
+    a]c
+
+/\ba\b/
+    a-
+    -a
+    -a-
+
+/\by\b/
+    *** Failers
+    xy
+    yz
+    xyz
+
+/\Ba\B/
+    *** Failers
+    a-
+    -a
+    -a-
+
+/\By\b/
+    xy
+
+/\by\B/
+    yz
+
+/\By\B/
+    xyz
+
+/\w/
+    a
+
+/\W/
+    -
+    *** Failers
+    -
+    a
+
+/a\sb/
+    a b
+
+/a\Sb/
+    a-b
+    *** Failers
+    a-b
+    a b
+
+/\d/
+    1
+
+/\D/
+    -
+    *** Failers
+    -
+    1
+
+/[\w]/
+    a
+
+/[\W]/
+    -
+    *** Failers
+    -
+    a
+
+/a[\s]b/
+    a b
+
+/a[\S]b/
+    a-b
+    *** Failers
+    a-b
+    a b
+
+/[\d]/
+    1
+
+/[\D]/
+    -
+    *** Failers
+    -
+    1
+
+/ab|cd/
+    abc
+    abcd
+
+/()ef/
+    def
+
+/$b/
+
+/a\(b/
+    a(b
+
+/a\(*b/
+    ab
+    a((b
+
+/a\\b/
+    a\b
+
+/((a))/
+    abc
+
+/(a)b(c)/
+    abc
+
+/a+b+c/
+    aabbabc
+
+/a{1,}b{1,}c/
+    aabbabc
+
+/a.+?c/
+    abcabc
+
+/(a+|b)*/
+    ab
+
+/(a+|b){0,}/
+    ab
+
+/(a+|b)+/
+    ab
+
+/(a+|b){1,}/
+    ab
+
+/(a+|b)?/
+    ab
+
+/(a+|b){0,1}/
+    ab
+
+/[^ab]*/
+    cde
+
+/abc/
+    *** Failers
+    b
+    
+
+/a*/
+    
+
+/([abc])*d/
+    abbbcd
+
+/([abc])*bcd/
+    abcd
+
+/a|b|c|d|e/
+    e
+
+/(a|b|c|d|e)f/
+    ef
+
+/abcd*efg/
+    abcdefg
+
+/ab*/
+    xabyabbbz
+    xayabbbz
+
+/(ab|cd)e/
+    abcde
+
+/[abhgefdc]ij/
+    hij
+
+/^(ab|cd)e/
+
+/(abc|)ef/
+    abcdef
+
+/(a|b)c*d/
+    abcd
+
+/(ab|ab*)bc/
+    abc
+
+/a([bc]*)c*/
+    abc
+
+/a([bc]*)(c*d)/
+    abcd
+
+/a([bc]+)(c*d)/
+    abcd
+
+/a([bc]*)(c+d)/
+    abcd
+
+/a[bcd]*dcdcde/
+    adcdcde
+
+/a[bcd]+dcdcde/
+    *** Failers
+    abcde
+    adcdcde
+
+/(ab|a)b*c/
+    abc
+
+/((a)(b)c)(d)/
+    abcd
+
+/[a-zA-Z_][a-zA-Z0-9_]*/
+    alpha
+
+/^a(bc+|b[eh])g|.h$/
+    abh
+
+/(bc+d$|ef*g.|h?i(j|k))/
+    effgz
+    ij
+    reffgz
+    *** Failers
+    effg
+    bcdd
+
+/((((((((((a))))))))))/
+    a
+
+/((((((((((a))))))))))\10/
+    aa
+
+/(((((((((a)))))))))/
+    a
+
+/multiple words of text/
+    *** Failers
+    aa
+    uh-uh
+
+/multiple words/
+    multiple words, yeah
+
+/(.*)c(.*)/
+    abcde
+
+/\((.*), (.*)\)/
+    (a, b)
+
+/[k]/
+
+/abcd/
+    abcd
+
+/a(bc)d/
+    abcd
+
+/a[-]?c/
+    ac
+
+/(abc)\1/
+    abcabc
+
+/([a-c]*)\1/
+    abcabc
+
+/(a)|\1/
+    a
+    *** Failers
+    ab
+    x
+
+/(([a-c])b*?\2)*/
+    ababbbcbc
+
+/(([a-c])b*?\2){3}/
+    ababbbcbc
+
+/((\3|b)\2(a)x)+/
+    aaaxabaxbaaxbbax
+
+/((\3|b)\2(a)){2,}/
+    bbaababbabaaaaabbaaaabba
+
+/abc/i
+    ABC
+    XABCY
+    ABABC
+    *** Failers
+    aaxabxbaxbbx
+    XBC
+    AXC
+    ABX
+
+/ab*c/i
+    ABC
+
+/ab*bc/i
+    ABC
+    ABBC
+
+/ab*?bc/i
+    ABBBBC
+
+/ab{0,}?bc/i
+    ABBBBC
+
+/ab+?bc/i
+    ABBC
+
+/ab+bc/i
+    *** Failers
+    ABC
+    ABQ
+
+/ab{1,}bc/i
+
+/ab+bc/i
+    ABBBBC
+
+/ab{1,}?bc/i
+    ABBBBC
+
+/ab{1,3}?bc/i
+    ABBBBC
+
+/ab{3,4}?bc/i
+    ABBBBC
+
+/ab{4,5}?bc/i
+    *** Failers
+    ABQ
+    ABBBBC
+
+/ab??bc/i
+    ABBC
+    ABC
+
+/ab{0,1}?bc/i
+    ABC
+
+/ab??bc/i
+
+/ab??c/i
+    ABC
+
+/ab{0,1}?c/i
+    ABC
+
+/^abc$/i
+    ABC
+    *** Failers
+    ABBBBC
+    ABCC
+
+/^abc/i
+    ABCC
+
+/^abc$/i
+
+/abc$/i
+    AABC
+
+/^/i
+    ABC
+
+/$/i
+    ABC
+
+/a.c/i
+    ABC
+    AXC
+
+/a.*?c/i
+    AXYZC
+
+/a.*c/i
+    *** Failers
+    AABC
+    AXYZD
+
+/a[bc]d/i
+    ABD
+
+/a[b-d]e/i
+    ACE
+    *** Failers
+    ABC
+    ABD
+
+/a[b-d]/i
+    AAC
+
+/a[-b]/i
+    A-
+
+/a[b-]/i
+    A-
+
+/a]/i
+    A]
+
+/a[]]b/i
+    A]B
+
+/a[^bc]d/i
+    AED
+
+/a[^-b]c/i
+    ADC
+    *** Failers
+    ABD
+    A-C
+
+/a[^]b]c/i
+    ADC
+
+/ab|cd/i
+    ABC
+    ABCD
+
+/()ef/i
+    DEF
+
+/$b/i
+    *** Failers
+    A]C
+    B
+
+/a\(b/i
+    A(B
+
+/a\(*b/i
+    AB
+    A((B
+
+/a\\b/i
+    A\B
+
+/((a))/i
+    ABC
+
+/(a)b(c)/i
+    ABC
+
+/a+b+c/i
+    AABBABC
+
+/a{1,}b{1,}c/i
+    AABBABC
+
+/a.+?c/i
+    ABCABC
+
+/a.*?c/i
+    ABCABC
+
+/a.{0,5}?c/i
+    ABCABC
+
+/(a+|b)*/i
+    AB
+
+/(a+|b){0,}/i
+    AB
+
+/(a+|b)+/i
+    AB
+
+/(a+|b){1,}/i
+    AB
+
+/(a+|b)?/i
+    AB
+
+/(a+|b){0,1}/i
+    AB
+
+/(a+|b){0,1}?/i
+    AB
+
+/[^ab]*/i
+    CDE
+
+/abc/i
+
+/a*/i
+    
+
+/([abc])*d/i
+    ABBBCD
+
+/([abc])*bcd/i
+    ABCD
+
+/a|b|c|d|e/i
+    E
+
+/(a|b|c|d|e)f/i
+    EF
+
+/abcd*efg/i
+    ABCDEFG
+
+/ab*/i
+    XABYABBBZ
+    XAYABBBZ
+
+/(ab|cd)e/i
+    ABCDE
+
+/[abhgefdc]ij/i
+    HIJ
+
+/^(ab|cd)e/i
+    ABCDE
+
+/(abc|)ef/i
+    ABCDEF
+
+/(a|b)c*d/i
+    ABCD
+
+/(ab|ab*)bc/i
+    ABC
+
+/a([bc]*)c*/i
+    ABC
+
+/a([bc]*)(c*d)/i
+    ABCD
+
+/a([bc]+)(c*d)/i
+    ABCD
+
+/a([bc]*)(c+d)/i
+    ABCD
+
+/a[bcd]*dcdcde/i
+    ADCDCDE
+
+/a[bcd]+dcdcde/i
+
+/(ab|a)b*c/i
+    ABC
+
+/((a)(b)c)(d)/i
+    ABCD
+
+/[a-zA-Z_][a-zA-Z0-9_]*/i
+    ALPHA
+
+/^a(bc+|b[eh])g|.h$/i
+    ABH
+
+/(bc+d$|ef*g.|h?i(j|k))/i
+    EFFGZ
+    IJ
+    REFFGZ
+    *** Failers
+    ADCDCDE
+    EFFG
+    BCDD
+
+/((((((((((a))))))))))/i
+    A
+
+/((((((((((a))))))))))\10/i
+    AA
+
+/(((((((((a)))))))))/i
+    A
+
+/(?:(?:(?:(?:(?:(?:(?:(?:(?:(a))))))))))/i
+    A
+
+/(?:(?:(?:(?:(?:(?:(?:(?:(?:(a|b|c))))))))))/i
+    C
+
+/multiple words of text/i
+    *** Failers
+    AA
+    UH-UH
+
+/multiple words/i
+    MULTIPLE WORDS, YEAH
+
+/(.*)c(.*)/i
+    ABCDE
+
+/\((.*), (.*)\)/i
+    (A, B)
+
+/[k]/i
+
+/abcd/i
+    ABCD
+
+/a(bc)d/i
+    ABCD
+
+/a[-]?c/i
+    AC
+
+/(abc)\1/i
+    ABCABC
+
+/([a-c]*)\1/i
+    ABCABC
+
+/a(?!b)./
+    abad
+
+/a(?=d)./
+    abad
+
+/a(?=c|d)./
+    abad
+
+/a(?:b|c|d)(.)/
+    ace
+
+/a(?:b|c|d)*(.)/
+    ace
+
+/a(?:b|c|d)+?(.)/
+    ace
+    acdbcdbe
+
+/a(?:b|c|d)+(.)/
+    acdbcdbe
+
+/a(?:b|c|d){2}(.)/
+    acdbcdbe
+
+/a(?:b|c|d){4,5}(.)/
+    acdbcdbe
+
+/a(?:b|c|d){4,5}?(.)/
+    acdbcdbe
+
+/((foo)|(bar))*/
+    foobar
+
+/a(?:b|c|d){6,7}(.)/
+    acdbcdbe
+
+/a(?:b|c|d){6,7}?(.)/
+    acdbcdbe
+
+/a(?:b|c|d){5,6}(.)/
+    acdbcdbe
+
+/a(?:b|c|d){5,6}?(.)/
+    acdbcdbe
+
+/a(?:b|c|d){5,7}(.)/
+    acdbcdbe
+
+/a(?:b|c|d){5,7}?(.)/
+    acdbcdbe
+
+/a(?:b|(c|e){1,2}?|d)+?(.)/
+    ace
+
+/^(.+)?B/
+    AB
+
+/^([^a-z])|(\^)$/
+    .
+
+/^[<>]&/
+    <&OUT
+
+/^(a\1?){4}$/
+    aaaaaaaaaa
+    *** Failers
+    AB
+    aaaaaaaaa
+    aaaaaaaaaaa
+
+/^(a(?(1)\1)){4}$/
+    aaaaaaaaaa
+    *** Failers
+    aaaaaaaaa
+    aaaaaaaaaaa
+
+/(?:(f)(o)(o)|(b)(a)(r))*/
+    foobar
+
+/(?<=a)b/
+    ab
+    *** Failers
+    cb
+    b
+
+/(?<!c)b/
+    ab
+    b
+    b
+
+/(?:..)*a/
+    aba
+
+/(?:..)*?a/
+    aba
+
+/^(?:b|a(?=(.)))*\1/
+    abc
+
+/^(){3,5}/
+    abc
+
+/^(a+)*ax/
+    aax
+
+/^((a|b)+)*ax/
+    aax
+
+/^((a|bc)+)*ax/
+    aax
+
+/(a|x)*ab/
+    cab
+
+/(a)*ab/
+    cab
+
+/(?:(?i)a)b/
+    ab
+
+/((?i)a)b/
+    ab
+
+/(?:(?i)a)b/
+    Ab
+
+/((?i)a)b/
+    Ab
+
+/(?:(?i)a)b/
+    *** Failers
+    cb
+    aB
+
+/((?i)a)b/
+
+/(?i:a)b/
+    ab
+
+/((?i:a))b/
+    ab
+
+/(?i:a)b/
+    Ab
+
+/((?i:a))b/
+    Ab
+
+/(?i:a)b/
+    *** Failers
+    aB
+    aB
+
+/((?i:a))b/
+
+/(?:(?-i)a)b/i
+    ab
+
+/((?-i)a)b/i
+    ab
+
+/(?:(?-i)a)b/i
+    aB
+
+/((?-i)a)b/i
+    aB
+
+/(?:(?-i)a)b/i
+    *** Failers
+    aB
+    Ab
+
+/((?-i)a)b/i
+
+/(?:(?-i)a)b/i
+    aB
+
+/((?-i)a)b/i
+    aB
+
+/(?:(?-i)a)b/i
+    *** Failers
+    Ab
+    AB
+
+/((?-i)a)b/i
+
+/(?-i:a)b/i
+    ab
+
+/((?-i:a))b/i
+    ab
+
+/(?-i:a)b/i
+    aB
+
+/((?-i:a))b/i
+    aB
+
+/(?-i:a)b/i
+    *** Failers
+    AB
+    Ab
+
+/((?-i:a))b/i
+
+/(?-i:a)b/i
+    aB
+
+/((?-i:a))b/i
+    aB
+
+/(?-i:a)b/i
+    *** Failers
+    Ab
+    AB
+
+/((?-i:a))b/i
+
+/((?-i:a.))b/i
+    *** Failers
+    AB
+    a\nB
+
+/((?s-i:a.))b/i
+    a\nB
+
+/(?:c|d)(?:)(?:a(?:)(?:b)(?:b(?:))(?:b(?:)(?:b)))/
+    cabbbb
+
+/(?:c|d)(?:)(?:aaaaaaaa(?:)(?:bbbbbbbb)(?:bbbbbbbb(?:))(?:bbbbbbbb(?:)(?:bbbbbbbb)))/
+    caaaaaaaabbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
+
+/(ab)\d\1/i
+    Ab4ab
+    ab4Ab
+
+/foo\w*\d{4}baz/
+    foobar1234baz
+
+/x(~~)*(?:(?:F)?)?/
+    x~~
+
+/^a(?#xxx){3}c/
+    aaac
+
+/^a (?#xxx) (?#yyy) {3}c/x
+    aaac
+
+/(?<![cd])b/
+    *** Failers
+    B\nB
+    dbcb
+
+/(?<![cd])[ab]/
+    dbaacb
+
+/(?<!(c|d))b/
+
+/(?<!(c|d))[ab]/
+    dbaacb
+
+/(?<!cd)[ab]/
+    cdaccb
+
+/^(?:a?b?)*$/
+    *** Failers
+    dbcb
+    a--
+
+/((?s)^a(.))((?m)^b$)/
+    a\nb\nc\n
+
+/((?m)^b$)/
+    a\nb\nc\n
+
+/(?m)^b/
+    a\nb\n
+
+/(?m)^(b)/
+    a\nb\n
+
+/((?m)^b)/
+    a\nb\n
+
+/\n((?m)^b)/
+    a\nb\n
+
+/((?s).)c(?!.)/
+    a\nb\nc\n
+    a\nb\nc\n
+
+/((?s)b.)c(?!.)/
+    a\nb\nc\n
+    a\nb\nc\n
+
+/^b/
+
+/()^b/
+    *** Failers
+    a\nb\nc\n
+    a\nb\nc\n
+
+/((?m)^b)/
+    a\nb\nc\n
+
+/(?(1)a|b)/
+
+/(?(1)b|a)/
+    a
+
+/(x)?(?(1)a|b)/
+    *** Failers
+    a
+    a
+
+/(x)?(?(1)b|a)/
+    a
+
+/()?(?(1)b|a)/
+    a
+
+/()(?(1)b|a)/
+
+/()?(?(1)a|b)/
+    a
+
+/^(\()?blah(?(1)(\)))$/
+    (blah)
+    blah
+    *** Failers
+    a
+    blah)
+    (blah
+
+/^(\(+)?blah(?(1)(\)))$/
+    (blah)
+    blah
+    *** Failers
+    blah)
+    (blah
+
+/(?(?!a)a|b)/
+
+/(?(?!a)b|a)/
+    a
+
+/(?(?=a)b|a)/
+    *** Failers
+    a
+    a
+
+/(?(?=a)a|b)/
+    a
+
+/(?=(a+?))(\1ab)/
+    aaab
+
+/^(?=(a+?))\1ab/
+
+/(\w+:)+/
+    one:
+
+/$(?<=^(a))/
+    a
+
+/(?=(a+?))(\1ab)/
+    aaab
+
+/^(?=(a+?))\1ab/
+    *** Failers
+    aaab
+    aaab
+
+/([\w:]+::)?(\w+)$/
+    abcd
+    xy:z:::abcd
+
+/^[^bcd]*(c+)/
+    aexycd
+
+/(a*)b+/
+    caab
+
+/([\w:]+::)?(\w+)$/
+    abcd
+    xy:z:::abcd
+    *** Failers
+    abcd:
+    abcd:
+
+/^[^bcd]*(c+)/
+    aexycd
+
+/(>a+)ab/
+
+/(?>a+)b/
+    aaab
+
+/([[:]+)/
+    a:[b]:
+
+/([[=]+)/
+    a=[b]=
+
+/([[.]+)/
+    a.[b].
+
+/((?>a+)b)/
+    aaab
+
+/(?>(a+))b/
+    aaab
+
+/((?>[^()]+)|\([^()]*\))+/
+    ((abc(ade)ufh()()x
+
+/a\Z/
+    *** Failers
+    aaab
+    a\nb\n
+
+/b\Z/
+    a\nb\n
+
+/b\z/
+
+/b\Z/
+    a\nb
+
+/b\z/
+    a\nb
+    *** Failers
+    
+/^(?>(?(1)\.|())[^\W_](?>[a-z0-9-]*[^\W_])?)+$/
+    a
+    abc
+    a-b
+    0-9 
+    a.b
+    5.6.7  
+    the.quick.brown.fox
+    a100.b200.300c  
+    12-ab.1245 
+    ***Failers
+    \
+    .a
+    -a
+    a-
+    a.  
+    a_b 
+    a.-
+    a..  
+    ab..bc 
+    the.quick.brown.fox-
+    the.quick.brown.fox.
+    the.quick.brown.fox_
+    the.quick.brown.fox+       
+
+/(?>.*)(?<=(abcd|wxyz))/
+    alphabetabcd
+    endingwxyz
+    *** Failers
+    a rather long string that doesn't end with one of them
+
+/word (?>(?:(?!otherword)[a-zA-Z0-9]+ ){0,30})otherword/
+    word cat dog elephant mussel cow horse canary baboon snake shark otherword
+    word cat dog elephant mussel cow horse canary baboon snake shark
+  
+/word (?>[a-zA-Z0-9]+ ){0,30}otherword/
+    word cat dog elephant mussel cow horse canary baboon snake shark the quick brown fox and the lazy dog and several other words getting close to thirty by now I hope
+
+/(?<=\d{3}(?!999))foo/
+    999foo
+    123999foo 
+    *** Failers
+    123abcfoo
+    
+/(?<=(?!...999)\d{3})foo/
+    999foo
+    123999foo 
+    *** Failers
+    123abcfoo
+
+/(?<=\d{3}(?!999)...)foo/
+    123abcfoo
+    123456foo 
+    *** Failers
+    123999foo  
+    
+/(?<=\d{3}...)(?<!999)foo/
+    123abcfoo   
+    123456foo 
+    *** Failers
+    123999foo  
+
+/<a[\s]+href[\s]*=[\s]*          # find <a href=
+ ([\"\'])?                       # find single or double quote
+ (?(1) (.*?)\1 | ([^\s]+))       # if quote found, match up to next matching
+                                 # quote, otherwise match up to next space
+/isx
+    <a href=abcd xyz
+    <a href=\"abcd xyz pqr\" cats
+    <a href=\'abcd xyz pqr\' cats
+
+/<a\s+href\s*=\s*                # find <a href=
+ (["'])?                         # find single or double quote
+ (?(1) (.*?)\1 | (\S+))          # if quote found, match up to next matching
+                                 # quote, otherwise match up to next space
+/isx
+    <a href=abcd xyz
+    <a href=\"abcd xyz pqr\" cats
+    <a href       =       \'abcd xyz pqr\' cats
+
+/<a\s+href(?>\s*)=(?>\s*)        # find <a href=
+ (["'])?                         # find single or double quote
+ (?(1) (.*?)\1 | (\S+))          # if quote found, match up to next matching
+                                 # quote, otherwise match up to next space
+/isx
+    <a href=abcd xyz
+    <a href=\"abcd xyz pqr\" cats
+    <a href       =       \'abcd xyz pqr\' cats
+
+/ End of test input /       
diff --git a/srclib/pcre/testdata/testinput4 b/srclib/pcre/testdata/testinput4
new file mode 100644
index 0000000000..c23b52aceb
--- /dev/null
+++ b/srclib/pcre/testdata/testinput4
@@ -0,0 +1,64 @@
+/^[\w]+/
+    *** Failers
+    �cole
+
+/^[\w]+/Lfr
+    �cole
+
+/^[\w]+/
+    *** Failers
+    �cole
+
+/^[\W]+/
+    �cole
+
+/^[\W]+/Lfr
+    *** Failers
+    �cole
+
+/[\b]/
+    \b
+    *** Failers
+    a
+
+/[\b]/Lfr
+    \b
+    *** Failers
+    a
+
+/^\w+/
+    *** Failers
+    �cole
+
+/^\w+/Lfr
+    �cole
+
+/(.+)\b(.+)/
+    �cole
+
+/(.+)\b(.+)/Lfr
+    *** Failers
+    �cole
+
+/�cole/i
+    �cole
+    *** Failers
+    �cole
+
+/�cole/iLfr
+    �cole
+    �cole
+
+/\w/IS
+
+/\w/ISLfr
+
+/^[\xc8-\xc9]/iLfr
+    �cole
+    �cole
+
+/^[\xc8-\xc9]/Lfr
+    �cole
+    *** Failers 
+    �cole
+
diff --git a/srclib/pcre/testdata/testoutput1 b/srclib/pcre/testdata/testoutput1
new file mode 100644
index 0000000000..affb475aa5
--- /dev/null
+++ b/srclib/pcre/testdata/testoutput1
@@ -0,0 +1,2924 @@
+PCRE version 3.1 09-Feb-2000
+
+/the quick brown fox/
+    the quick brown fox
+ 0: the quick brown fox
+    The quick brown FOX
+No match
+    What do you know about the quick brown fox?
+ 0: the quick brown fox
+    What do you know about THE QUICK BROWN FOX?
+No match
+
+/The quick brown fox/i
+    the quick brown fox
+ 0: the quick brown fox
+    The quick brown FOX
+ 0: The quick brown FOX
+    What do you know about the quick brown fox?
+ 0: the quick brown fox
+    What do you know about THE QUICK BROWN FOX?
+ 0: THE QUICK BROWN FOX
+
+/abcd\t\n\r\f\a\e\071\x3b\$\\\?caxyz/
+    abcd\t\n\r\f\a\e9;\$\\?caxyz
+ 0: abcd\x09\x0a\x0d\x0c\x07\x1b9;$\?caxyz
+
+/a*abc?xyz+pqr{3}ab{2,}xy{4,5}pq{0,6}AB{0,}zz/
+    abxyzpqrrrabbxyyyypqAzz
+ 0: abxyzpqrrrabbxyyyypqAzz
+    abxyzpqrrrabbxyyyypqAzz
+ 0: abxyzpqrrrabbxyyyypqAzz
+    aabxyzpqrrrabbxyyyypqAzz
+ 0: aabxyzpqrrrabbxyyyypqAzz
+    aaabxyzpqrrrabbxyyyypqAzz
+ 0: aaabxyzpqrrrabbxyyyypqAzz
+    aaaabxyzpqrrrabbxyyyypqAzz
+ 0: aaaabxyzpqrrrabbxyyyypqAzz
+    abcxyzpqrrrabbxyyyypqAzz
+ 0: abcxyzpqrrrabbxyyyypqAzz
+    aabcxyzpqrrrabbxyyyypqAzz
+ 0: aabcxyzpqrrrabbxyyyypqAzz
+    aaabcxyzpqrrrabbxyyyypAzz
+ 0: aaabcxyzpqrrrabbxyyyypAzz
+    aaabcxyzpqrrrabbxyyyypqAzz
+ 0: aaabcxyzpqrrrabbxyyyypqAzz
+    aaabcxyzpqrrrabbxyyyypqqAzz
+ 0: aaabcxyzpqrrrabbxyyyypqqAzz
+    aaabcxyzpqrrrabbxyyyypqqqAzz
+ 0: aaabcxyzpqrrrabbxyyyypqqqAzz
+    aaabcxyzpqrrrabbxyyyypqqqqAzz
+ 0: aaabcxyzpqrrrabbxyyyypqqqqAzz
+    aaabcxyzpqrrrabbxyyyypqqqqqAzz
+ 0: aaabcxyzpqrrrabbxyyyypqqqqqAzz
+    aaabcxyzpqrrrabbxyyyypqqqqqqAzz
+ 0: aaabcxyzpqrrrabbxyyyypqqqqqqAzz
+    aaaabcxyzpqrrrabbxyyyypqAzz
+ 0: aaaabcxyzpqrrrabbxyyyypqAzz
+    abxyzzpqrrrabbxyyyypqAzz
+ 0: abxyzzpqrrrabbxyyyypqAzz
+    aabxyzzzpqrrrabbxyyyypqAzz
+ 0: aabxyzzzpqrrrabbxyyyypqAzz
+    aaabxyzzzzpqrrrabbxyyyypqAzz
+ 0: aaabxyzzzzpqrrrabbxyyyypqAzz
+    aaaabxyzzzzpqrrrabbxyyyypqAzz
+ 0: aaaabxyzzzzpqrrrabbxyyyypqAzz
+    abcxyzzpqrrrabbxyyyypqAzz
+ 0: abcxyzzpqrrrabbxyyyypqAzz
+    aabcxyzzzpqrrrabbxyyyypqAzz
+ 0: aabcxyzzzpqrrrabbxyyyypqAzz
+    aaabcxyzzzzpqrrrabbxyyyypqAzz
+ 0: aaabcxyzzzzpqrrrabbxyyyypqAzz
+    aaaabcxyzzzzpqrrrabbxyyyypqAzz
+ 0: aaaabcxyzzzzpqrrrabbxyyyypqAzz
+    aaaabcxyzzzzpqrrrabbbxyyyypqAzz
+ 0: aaaabcxyzzzzpqrrrabbbxyyyypqAzz
+    aaaabcxyzzzzpqrrrabbbxyyyyypqAzz
+ 0: aaaabcxyzzzzpqrrrabbbxyyyyypqAzz
+    aaabcxyzpqrrrabbxyyyypABzz
+ 0: aaabcxyzpqrrrabbxyyyypABzz
+    aaabcxyzpqrrrabbxyyyypABBzz
+ 0: aaabcxyzpqrrrabbxyyyypABBzz
+    >>>aaabxyzpqrrrabbxyyyypqAzz
+ 0: aaabxyzpqrrrabbxyyyypqAzz
+    >aaaabxyzpqrrrabbxyyyypqAzz
+ 0: aaaabxyzpqrrrabbxyyyypqAzz
+    >>>>abcxyzpqrrrabbxyyyypqAzz
+ 0: abcxyzpqrrrabbxyyyypqAzz
+    *** Failers
+No match
+    abxyzpqrrabbxyyyypqAzz
+No match
+    abxyzpqrrrrabbxyyyypqAzz
+No match
+    abxyzpqrrrabxyyyypqAzz
+No match
+    aaaabcxyzzzzpqrrrabbbxyyyyyypqAzz
+No match
+    aaaabcxyzzzzpqrrrabbbxyyypqAzz
+No match
+    aaabcxyzpqrrrabbxyyyypqqqqqqqAzz
+No match
+
+/^(abc){1,2}zz/
+    abczz
+ 0: abczz
+ 1: abc
+    abcabczz
+ 0: abcabczz
+ 1: abc
+    *** Failers
+No match
+    zz
+No match
+    abcabcabczz
+No match
+    >>abczz
+No match
+
+/^(b+?|a){1,2}?c/
+    bc
+ 0: bc
+ 1: b
+    bbc
+ 0: bbc
+ 1: b
+    bbbc
+ 0: bbbc
+ 1: bb
+    bac
+ 0: bac
+ 1: a
+    bbac
+ 0: bbac
+ 1: a
+    aac
+ 0: aac
+ 1: a
+    abbbbbbbbbbbc
+ 0: abbbbbbbbbbbc
+ 1: bbbbbbbbbbb
+    bbbbbbbbbbbac
+ 0: bbbbbbbbbbbac
+ 1: a
+    *** Failers
+No match
+    aaac
+No match
+    abbbbbbbbbbbac
+No match
+
+/^(b+|a){1,2}c/
+    bc
+ 0: bc
+ 1: b
+    bbc
+ 0: bbc
+ 1: bb
+    bbbc
+ 0: bbbc
+ 1: bbb
+    bac
+ 0: bac
+ 1: a
+    bbac
+ 0: bbac
+ 1: a
+    aac
+ 0: aac
+ 1: a
+    abbbbbbbbbbbc
+ 0: abbbbbbbbbbbc
+ 1: bbbbbbbbbbb
+    bbbbbbbbbbbac
+ 0: bbbbbbbbbbbac
+ 1: a
+    *** Failers
+No match
+    aaac
+No match
+    abbbbbbbbbbbac
+No match
+
+/^(b+|a){1,2}?bc/
+    bbc
+ 0: bbc
+ 1: b
+
+/^(b*|ba){1,2}?bc/
+    babc
+ 0: babc
+ 1: ba
+    bbabc
+ 0: bbabc
+ 1: ba
+    bababc
+ 0: bababc
+ 1: ba
+    *** Failers
+No match
+    bababbc
+No match
+    babababc
+No match
+
+/^(ba|b*){1,2}?bc/
+    babc
+ 0: babc
+ 1: ba
+    bbabc
+ 0: bbabc
+ 1: ba
+    bababc
+ 0: bababc
+ 1: ba
+    *** Failers
+No match
+    bababbc
+No match
+    babababc
+No match
+
+/^\ca\cA\c[\c{\c:/
+    \x01\x01\e;z
+ 0: \x01\x01\x1b;z
+
+/^[ab\]cde]/
+    athing
+ 0: a
+    bthing
+ 0: b
+    ]thing
+ 0: ]
+    cthing
+ 0: c
+    dthing
+ 0: d
+    ething
+ 0: e
+    *** Failers
+No match
+    fthing
+No match
+    [thing
+No match
+    \\thing
+No match
+
+/^[]cde]/
+    ]thing
+ 0: ]
+    cthing
+ 0: c
+    dthing
+ 0: d
+    ething
+ 0: e
+    *** Failers
+No match
+    athing
+No match
+    fthing
+No match
+
+/^[^ab\]cde]/
+    fthing
+ 0: f
+    [thing
+ 0: [
+    \\thing
+ 0: \
+    *** Failers
+ 0: *
+    athing
+No match
+    bthing
+No match
+    ]thing
+No match
+    cthing
+No match
+    dthing
+No match
+    ething
+No match
+
+/^[^]cde]/
+    athing
+ 0: a
+    fthing
+ 0: f
+    *** Failers
+ 0: *
+    ]thing
+No match
+    cthing
+No match
+    dthing
+No match
+    ething
+No match
+
+/^\�/
+    �
+ 0: \x81
+
+/^�/
+    �
+ 0: \xff
+
+/^[0-9]+$/
+    0
+ 0: 0
+    1
+ 0: 1
+    2
+ 0: 2
+    3
+ 0: 3
+    4
+ 0: 4
+    5
+ 0: 5
+    6
+ 0: 6
+    7
+ 0: 7
+    8
+ 0: 8
+    9
+ 0: 9
+    10
+ 0: 10
+    100
+ 0: 100
+    *** Failers
+No match
+    abc
+No match
+
+/^.*nter/
+    enter
+ 0: enter
+    inter
+ 0: inter
+    uponter
+ 0: uponter
+
+/^xxx[0-9]+$/
+    xxx0
+ 0: xxx0
+    xxx1234
+ 0: xxx1234
+    *** Failers
+No match
+    xxx
+No match
+
+/^.+[0-9][0-9][0-9]$/
+    x123
+ 0: x123
+    xx123
+ 0: xx123
+    123456
+ 0: 123456
+    *** Failers
+No match
+    123
+No match
+    x1234
+ 0: x1234
+
+/^.+?[0-9][0-9][0-9]$/
+    x123
+ 0: x123
+    xx123
+ 0: xx123
+    123456
+ 0: 123456
+    *** Failers
+No match
+    123
+No match
+    x1234
+ 0: x1234
+
+/^([^!]+)!(.+)=apquxz\.ixr\.zzz\.ac\.uk$/
+    abc!pqr=apquxz.ixr.zzz.ac.uk
+ 0: abc!pqr=apquxz.ixr.zzz.ac.uk
+ 1: abc
+ 2: pqr
+    *** Failers
+No match
+    !pqr=apquxz.ixr.zzz.ac.uk
+No match
+    abc!=apquxz.ixr.zzz.ac.uk
+No match
+    abc!pqr=apquxz:ixr.zzz.ac.uk
+No match
+    abc!pqr=apquxz.ixr.zzz.ac.ukk
+No match
+
+/:/
+    Well, we need a colon: somewhere
+ 0: :
+    *** Fail if we don't
+No match
+
+/([\da-f:]+)$/i
+    0abc
+ 0: 0abc
+ 1: 0abc
+    abc
+ 0: abc
+ 1: abc
+    fed
+ 0: fed
+ 1: fed
+    E
+ 0: E
+ 1: E
+    ::
+ 0: ::
+ 1: ::
+    5f03:12C0::932e
+ 0: 5f03:12C0::932e
+ 1: 5f03:12C0::932e
+    fed def
+ 0: def
+ 1: def
+    Any old stuff
+ 0: ff
+ 1: ff
+    *** Failers
+No match
+    0zzz
+No match
+    gzzz
+No match
+    fed\x20
+No match
+    Any old rubbish
+No match
+
+/^.*\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})$/
+    .1.2.3
+ 0: .1.2.3
+ 1: 1
+ 2: 2
+ 3: 3
+    A.12.123.0
+ 0: A.12.123.0
+ 1: 12
+ 2: 123
+ 3: 0
+    *** Failers
+No match
+    .1.2.3333
+No match
+    1.2.3
+No match
+    1234.2.3
+No match
+
+/^(\d+)\s+IN\s+SOA\s+(\S+)\s+(\S+)\s*\(\s*$/
+    1 IN SOA non-sp1 non-sp2(
+ 0: 1 IN SOA non-sp1 non-sp2(
+ 1: 1
+ 2: non-sp1
+ 3: non-sp2
+    1    IN    SOA    non-sp1    non-sp2   (
+ 0: 1    IN    SOA    non-sp1    non-sp2   (
+ 1: 1
+ 2: non-sp1
+ 3: non-sp2
+    *** Failers
+No match
+    1IN SOA non-sp1 non-sp2(
+No match
+
+/^[a-zA-Z\d][a-zA-Z\d\-]*(\.[a-zA-Z\d][a-zA-z\d\-]*)*\.$/
+    a.
+ 0: a.
+    Z.
+ 0: Z.
+    2.
+ 0: 2.
+    ab-c.pq-r.
+ 0: ab-c.pq-r.
+ 1: .pq-r
+    sxk.zzz.ac.uk.
+ 0: sxk.zzz.ac.uk.
+ 1: .uk
+    x-.y-.
+ 0: x-.y-.
+ 1: .y-
+    *** Failers
+No match
+    -abc.peq.
+No match
+
+/^\*\.[a-z]([a-z\-\d]*[a-z\d]+)?(\.[a-z]([a-z\-\d]*[a-z\d]+)?)*$/
+    *.a
+ 0: *.a
+    *.b0-a
+ 0: *.b0-a
+ 1: 0-a
+    *.c3-b.c
+ 0: *.c3-b.c
+ 1: 3-b
+ 2: .c
+    *.c-a.b-c
+ 0: *.c-a.b-c
+ 1: -a
+ 2: .b-c
+ 3: -c
+    *** Failers
+No match
+    *.0
+No match
+    *.a-
+No match
+    *.a-b.c-
+No match
+    *.c-a.0-c
+No match
+
+/^(?=ab(de))(abd)(e)/
+    abde
+ 0: abde
+ 1: de
+ 2: abd
+ 3: e
+
+/^(?!(ab)de|x)(abd)(f)/
+    abdf
+ 0: abdf
+ 1: <unset>
+ 2: abd
+ 3: f
+
+/^(?=(ab(cd)))(ab)/
+    abcd
+ 0: ab
+ 1: abcd
+ 2: cd
+ 3: ab
+
+/^[\da-f](\.[\da-f])*$/i
+    a.b.c.d
+ 0: a.b.c.d
+ 1: .d
+    A.B.C.D
+ 0: A.B.C.D
+ 1: .D
+    a.b.c.1.2.3.C
+ 0: a.b.c.1.2.3.C
+ 1: .C
+
+/^\".*\"\s*(;.*)?$/
+    \"1234\"
+ 0: "1234"
+    \"abcd\" ;
+ 0: "abcd" ;
+ 1: ;
+    \"\" ; rhubarb
+ 0: "" ; rhubarb
+ 1: ; rhubarb
+    *** Failers
+No match
+    \"1234\" : things
+No match
+
+/^$/
+    \
+ 0: 
+    *** Failers
+No match
+
+/   ^    a   (?# begins with a)  b\sc (?# then b c) $ (?# then end)/x
+    ab c
+ 0: ab c
+    *** Failers
+No match
+    abc
+No match
+    ab cde
+No match
+
+/(?x)   ^    a   (?# begins with a)  b\sc (?# then b c) $ (?# then end)/
+    ab c
+ 0: ab c
+    *** Failers
+No match
+    abc
+No match
+    ab cde
+No match
+
+/^   a\ b[c ]d       $/x
+    a bcd
+ 0: a bcd
+    a b d
+ 0: a b d
+    *** Failers
+No match
+    abcd
+No match
+    ab d
+No match
+
+/^(a(b(c)))(d(e(f)))(h(i(j)))(k(l(m)))$/
+    abcdefhijklm
+ 0: abcdefhijklm
+ 1: abc
+ 2: bc
+ 3: c
+ 4: def
+ 5: ef
+ 6: f
+ 7: hij
+ 8: ij
+ 9: j
+10: klm
+11: lm
+12: m
+
+/^(?:a(b(c)))(?:d(e(f)))(?:h(i(j)))(?:k(l(m)))$/
+    abcdefhijklm
+ 0: abcdefhijklm
+ 1: bc
+ 2: c
+ 3: ef
+ 4: f
+ 5: ij
+ 6: j
+ 7: lm
+ 8: m
+
+/^[\w][\W][\s][\S][\d][\D][\b][\n][\c]][\022]/
+    a+ Z0+\x08\n\x1d\x12
+ 0: a+ Z0+\x08\x0a\x1d\x12
+
+/^[.^$|()*+?{,}]+/
+    .^\$(*+)|{?,?}
+ 0: .^$(*+)|{?,?}
+
+/^a*\w/
+    z
+ 0: z
+    az
+ 0: az
+    aaaz
+ 0: aaaz
+    a
+ 0: a
+    aa
+ 0: aa
+    aaaa
+ 0: aaaa
+    a+
+ 0: a
+    aa+
+ 0: aa
+
+/^a*?\w/
+    z
+ 0: z
+    az
+ 0: a
+    aaaz
+ 0: a
+    a
+ 0: a
+    aa
+ 0: a
+    aaaa
+ 0: a
+    a+
+ 0: a
+    aa+
+ 0: a
+
+/^a+\w/
+    az
+ 0: az
+    aaaz
+ 0: aaaz
+    aa
+ 0: aa
+    aaaa
+ 0: aaaa
+    aa+
+ 0: aa
+
+/^a+?\w/
+    az
+ 0: az
+    aaaz
+ 0: aa
+    aa
+ 0: aa
+    aaaa
+ 0: aa
+    aa+
+ 0: aa
+
+/^\d{8}\w{2,}/
+    1234567890
+ 0: 1234567890
+    12345678ab
+ 0: 12345678ab
+    12345678__
+ 0: 12345678__
+    *** Failers
+No match
+    1234567
+No match
+
+/^[aeiou\d]{4,5}$/
+    uoie
+ 0: uoie
+    1234
+ 0: 1234
+    12345
+ 0: 12345
+    aaaaa
+ 0: aaaaa
+    *** Failers
+No match
+    123456
+No match
+
+/^[aeiou\d]{4,5}?/
+    uoie
+ 0: uoie
+    1234
+ 0: 1234
+    12345
+ 0: 1234
+    aaaaa
+ 0: aaaa
+    123456
+ 0: 1234
+
+/\A(abc|def)=(\1){2,3}\Z/
+    abc=abcabc
+ 0: abc=abcabc
+ 1: abc
+ 2: abc
+    def=defdefdef
+ 0: def=defdefdef
+ 1: def
+ 2: def
+    *** Failers
+No match
+    abc=defdef
+No match
+
+/^(a)(b)(c)(d)(e)(f)(g)(h)(i)(j)(k)\11*(\3\4)\1(?#)2$/
+    abcdefghijkcda2
+ 0: abcdefghijkcda2
+ 1: a
+ 2: b
+ 3: c
+ 4: d
+ 5: e
+ 6: f
+ 7: g
+ 8: h
+ 9: i
+10: j
+11: k
+12: cd
+    abcdefghijkkkkcda2
+ 0: abcdefghijkkkkcda2
+ 1: a
+ 2: b
+ 3: c
+ 4: d
+ 5: e
+ 6: f
+ 7: g
+ 8: h
+ 9: i
+10: j
+11: k
+12: cd
+
+/(cat(a(ract|tonic)|erpillar)) \1()2(3)/
+    cataract cataract23
+ 0: cataract cataract23
+ 1: cataract
+ 2: aract
+ 3: ract
+ 4: 
+ 5: 3
+    catatonic catatonic23
+ 0: catatonic catatonic23
+ 1: catatonic
+ 2: atonic
+ 3: tonic
+ 4: 
+ 5: 3
+    caterpillar caterpillar23
+ 0: caterpillar caterpillar23
+ 1: caterpillar
+ 2: erpillar
+ 3: <unset>
+ 4: 
+ 5: 3
+
+
+/^From +([^ ]+) +[a-zA-Z][a-zA-Z][a-zA-Z] +[a-zA-Z][a-zA-Z][a-zA-Z] +[0-9]?[0-9] +[0-9][0-9]:[0-9][0-9]/
+    From abcd  Mon Sep 01 12:33:02 1997
+ 0: From abcd  Mon Sep 01 12:33
+ 1: abcd
+
+/^From\s+\S+\s+([a-zA-Z]{3}\s+){2}\d{1,2}\s+\d\d:\d\d/
+    From abcd  Mon Sep 01 12:33:02 1997
+ 0: From abcd  Mon Sep 01 12:33
+ 1: Sep 
+    From abcd  Mon Sep  1 12:33:02 1997
+ 0: From abcd  Mon Sep  1 12:33
+ 1: Sep  
+    *** Failers
+No match
+    From abcd  Sep 01 12:33:02 1997
+No match
+
+/^12.34/s
+    12\n34
+ 0: 12\x0a34
+    12\r34
+ 0: 12\x0d34
+
+/\w+(?=\t)/
+    the quick brown\t fox
+ 0: brown
+
+/foo(?!bar)(.*)/
+    foobar is foolish see?
+ 0: foolish see?
+ 1: lish see?
+
+/(?:(?!foo)...|^.{0,2})bar(.*)/
+    foobar crowbar etc
+ 0: rowbar etc
+ 1:  etc
+    barrel
+ 0: barrel
+ 1: rel
+    2barrel
+ 0: 2barrel
+ 1: rel
+    A barrel
+ 0: A barrel
+ 1: rel
+
+/^(\D*)(?=\d)(?!123)/
+    abc456
+ 0: abc
+ 1: abc
+    *** Failers
+No match
+    abc123
+No match
+
+/^1234(?# test newlines
+  inside)/
+    1234
+ 0: 1234
+
+/^1234 #comment in extended re
+  /x
+    1234
+ 0: 1234
+
+/#rhubarb
+  abcd/x
+    abcd
+ 0: abcd
+
+/^abcd#rhubarb/x
+    abcd
+ 0: abcd
+
+/^(a)\1{2,3}(.)/
+    aaab
+ 0: aaab
+ 1: a
+ 2: b
+    aaaab
+ 0: aaaab
+ 1: a
+ 2: b
+    aaaaab
+ 0: aaaaa
+ 1: a
+ 2: a
+    aaaaaab
+ 0: aaaaa
+ 1: a
+ 2: a
+
+/(?!^)abc/
+    the abc
+ 0: abc
+    *** Failers
+No match
+    abc
+No match
+
+/(?=^)abc/
+    abc
+ 0: abc
+    *** Failers
+No match
+    the abc
+No match
+
+/^[ab]{1,3}(ab*|b)/
+    aabbbbb
+ 0: aabb
+ 1: b
+
+/^[ab]{1,3}?(ab*|b)/
+    aabbbbb
+ 0: aabbbbb
+ 1: abbbbb
+
+/^[ab]{1,3}?(ab*?|b)/
+    aabbbbb
+ 0: aa
+ 1: a
+
+/^[ab]{1,3}(ab*?|b)/
+    aabbbbb
+ 0: aabb
+ 1: b
+
+/  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*                          # optional leading comment
+(?:    (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+" (?:                      # opening quote...
+[^\\\x80-\xff\n\015"]                #   Anything except backslash and quote
+|                     #    or
+\\ [^\x80-\xff]           #   Escaped something (something != CR)
+)* "  # closing quote
+)                    # initial word
+(?:  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  \.  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*   (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+" (?:                      # opening quote...
+[^\\\x80-\xff\n\015"]                #   Anything except backslash and quote
+|                     #    or
+\\ [^\x80-\xff]           #   Escaped something (something != CR)
+)* "  # closing quote
+)  )* # further okay, if led by a period
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  @  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*    (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                           # initial subdomain
+(?:                                  #
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  \.                        # if led by a period...
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*   (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                     #   ...further okay
+)*
+# address
+|                     #  or
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+" (?:                      # opening quote...
+[^\\\x80-\xff\n\015"]                #   Anything except backslash and quote
+|                     #    or
+\\ [^\x80-\xff]           #   Escaped something (something != CR)
+)* "  # closing quote
+)             # one word, optionally followed by....
+(?:
+[^()<>@,;:".\\\[\]\x80-\xff\000-\010\012-\037]  |  # atom and space parts, or...
+\(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)       |  # comments, or...
+
+" (?:                      # opening quote...
+[^\\\x80-\xff\n\015"]                #   Anything except backslash and quote
+|                     #    or
+\\ [^\x80-\xff]           #   Escaped something (something != CR)
+)* "  # closing quote
+# quoted strings
+)*
+<  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*                     # leading <
+(?:  @  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*    (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                           # initial subdomain
+(?:                                  #
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  \.                        # if led by a period...
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*   (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                     #   ...further okay
+)*
+
+(?:  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  ,  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  @  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*    (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                           # initial subdomain
+(?:                                  #
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  \.                        # if led by a period...
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*   (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                     #   ...further okay
+)*
+)* # further okay, if led by comma
+:                                # closing colon
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  )? #       optional route
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+" (?:                      # opening quote...
+[^\\\x80-\xff\n\015"]                #   Anything except backslash and quote
+|                     #    or
+\\ [^\x80-\xff]           #   Escaped something (something != CR)
+)* "  # closing quote
+)                    # initial word
+(?:  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  \.  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*   (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+" (?:                      # opening quote...
+[^\\\x80-\xff\n\015"]                #   Anything except backslash and quote
+|                     #    or
+\\ [^\x80-\xff]           #   Escaped something (something != CR)
+)* "  # closing quote
+)  )* # further okay, if led by a period
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  @  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*    (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                           # initial subdomain
+(?:                                  #
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  \.                        # if led by a period...
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*   (?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|   \[                         # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*    #    stuff
+\]                        #           ]
+)                     #   ...further okay
+)*
+#       address spec
+(?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*  > #                  trailing >
+# name and address
+)  (?: [\040\t] |  \(
+(?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  |  \( (?:  [^\\\x80-\xff\n\015()]  |  \\ [^\x80-\xff]  )* \)  )*
+\)  )*                       # optional trailing comment
+/x
+    Alan Other <user\@dom.ain>
+ 0: Alan Other <user@dom.ain>
+    <user\@dom.ain>
+ 0: user@dom.ain
+    user\@dom.ain
+ 0: user@dom.ain
+    \"A. Other\" <user.1234\@dom.ain> (a comment)
+ 0: "A. Other" <user.1234@dom.ain> (a comment)
+    A. Other <user.1234\@dom.ain> (a comment)
+ 0:  Other <user.1234@dom.ain> (a comment)
+    \"/s=user/ou=host/o=place/prmd=uu.yy/admd= /c=gb/\"\@x400-re.lay
+ 0: "/s=user/ou=host/o=place/prmd=uu.yy/admd= /c=gb/"@x400-re.lay
+    A missing angle <user\@some.where
+ 0: user@some.where
+    *** Failers
+No match
+    The quick brown fox
+No match
+
+/[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional leading comment
+(?:
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+# Atom
+|                       #  or
+"                                     # "
+[^\\\x80-\xff\n\015"] *                            #   normal
+(?:  \\ [^\x80-\xff]  [^\\\x80-\xff\n\015"] * )*        #   ( special normal* )*
+"                                     #        "
+# Quoted string
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+\.
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+# Atom
+|                       #  or
+"                                     # "
+[^\\\x80-\xff\n\015"] *                            #   normal
+(?:  \\ [^\x80-\xff]  [^\\\x80-\xff\n\015"] * )*        #   ( special normal* )*
+"                                     #        "
+# Quoted string
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# additional words
+)*
+@
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+(?:
+\.
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+)*
+# address
+|                             #  or
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+# Atom
+|                       #  or
+"                                     # "
+[^\\\x80-\xff\n\015"] *                            #   normal
+(?:  \\ [^\x80-\xff]  [^\\\x80-\xff\n\015"] * )*        #   ( special normal* )*
+"                                     #        "
+# Quoted string
+)
+# leading word
+[^()<>@,;:".\\\[\]\x80-\xff\000-\010\012-\037] *               # "normal" atoms and or spaces
+(?:
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+|
+"                                     # "
+[^\\\x80-\xff\n\015"] *                            #   normal
+(?:  \\ [^\x80-\xff]  [^\\\x80-\xff\n\015"] * )*        #   ( special normal* )*
+"                                     #        "
+) # "special" comment or quoted string
+[^()<>@,;:".\\\[\]\x80-\xff\000-\010\012-\037] *            #  more "normal"
+)*
+<
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# <
+(?:
+@
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+(?:
+\.
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+)*
+(?: ,
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+@
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+(?:
+\.
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+)*
+)*  # additional domains
+:
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+)?     #       optional route
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+# Atom
+|                       #  or
+"                                     # "
+[^\\\x80-\xff\n\015"] *                            #   normal
+(?:  \\ [^\x80-\xff]  [^\\\x80-\xff\n\015"] * )*        #   ( special normal* )*
+"                                     #        "
+# Quoted string
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+\.
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+# Atom
+|                       #  or
+"                                     # "
+[^\\\x80-\xff\n\015"] *                            #   normal
+(?:  \\ [^\x80-\xff]  [^\\\x80-\xff\n\015"] * )*        #   ( special normal* )*
+"                                     #        "
+# Quoted string
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# additional words
+)*
+@
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+(?:
+\.
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+(?:
+[^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]+    # some number of atom characters...
+(?![^(\040)<>@,;:".\\\[\]\000-\037\x80-\xff]) # ..not followed by something that could be part of an atom
+|
+\[                            # [
+(?: [^\\\x80-\xff\n\015\[\]] |  \\ [^\x80-\xff]  )*     #    stuff
+\]                           #           ]
+)
+[\040\t]*                    # Nab whitespace.
+(?:
+\(                              #  (
+[^\\\x80-\xff\n\015()] *                             #     normal*
+(?:                                 #       (
+(?:  \\ [^\x80-\xff]  |
+\(                            #  (
+[^\\\x80-\xff\n\015()] *                            #     normal*
+(?:  \\ [^\x80-\xff]   [^\\\x80-\xff\n\015()] * )*        #     (special normal*)*
+\)                           #                       )
+)    #         special
+[^\\\x80-\xff\n\015()] *                         #         normal*
+)*                                  #            )*
+\)                             #                )
+[\040\t]* )*    # If comment found, allow more spaces.
+# optional trailing comments
+)*
+#       address spec
+>                    #                 >
+# name and address
+)
+/x
+    Alan Other <user\@dom.ain>
+ 0: Alan Other <user@dom.ain>
+    <user\@dom.ain>
+ 0: user@dom.ain
+    user\@dom.ain
+ 0: user@dom.ain
+    \"A. Other\" <user.1234\@dom.ain> (a comment)
+ 0: "A. Other" <user.1234@dom.ain>
+    A. Other <user.1234\@dom.ain> (a comment)
+ 0:  Other <user.1234@dom.ain>
+    \"/s=user/ou=host/o=place/prmd=uu.yy/admd= /c=gb/\"\@x400-re.lay
+ 0: "/s=user/ou=host/o=place/prmd=uu.yy/admd= /c=gb/"@x400-re.lay
+    A missing angle <user\@some.where
+ 0: user@some.where
+    *** Failers
+No match
+    The quick brown fox
+No match
+
+/abc\0def\00pqr\000xyz\0000AB/
+    abc\0def\00pqr\000xyz\0000AB
+ 0: abc\x00def\x00pqr\x00xyz\x000AB
+    abc456 abc\0def\00pqr\000xyz\0000ABCDE
+ 0: abc\x00def\x00pqr\x00xyz\x000AB
+
+/abc\x0def\x00pqr\x000xyz\x0000AB/
+    abc\x0def\x00pqr\x000xyz\x0000AB
+ 0: abc\x0def\x00pqr\x000xyz\x0000AB
+    abc456 abc\x0def\x00pqr\x000xyz\x0000ABCDE
+ 0: abc\x0def\x00pqr\x000xyz\x0000AB
+
+/^[\000-\037]/
+    \0A
+ 0: \x00
+    \01B
+ 0: \x01
+    \037C
+ 0: \x1f
+
+/\0*/
+    \0\0\0\0
+ 0: \x00\x00\x00\x00
+
+/A\x0{2,3}Z/
+    The A\x0\x0Z
+ 0: A\x00\x00Z
+    An A\0\x0\0Z
+ 0: A\x00\x00\x00Z
+    *** Failers
+No match
+    A\0Z
+No match
+    A\0\x0\0\x0Z
+No match
+
+/^(cow|)\1(bell)/
+    cowcowbell
+ 0: cowcowbell
+ 1: cow
+ 2: bell
+    bell
+ 0: bell
+ 1: 
+ 2: bell
+    *** Failers
+No match
+    cowbell
+No match
+
+/^\s/
+    \040abc
+ 0:  
+    \x0cabc
+ 0: \x0c
+    \nabc
+ 0: \x0a
+    \rabc
+ 0: \x0d
+    \tabc
+ 0: \x09
+    *** Failers
+No match
+    abc
+No match
+
+/^a	b
+  
    c/x
+    abc
+ 0: abc
+
+/^(a|)\1*b/
+    ab
+ 0: ab
+ 1: a
+    aaaab
+ 0: aaaab
+ 1: a
+    b
+ 0: b
+ 1: 
+    *** Failers
+No match
+    acb
+No match
+
+/^(a|)\1+b/
+    aab
+ 0: aab
+ 1: a
+    aaaab
+ 0: aaaab
+ 1: a
+    b
+ 0: b
+ 1: 
+    *** Failers
+No match
+    ab
+No match
+
+/^(a|)\1?b/
+    ab
+ 0: ab
+ 1: a
+    aab
+ 0: aab
+ 1: a
+    b
+ 0: b
+ 1: 
+    *** Failers
+No match
+    acb
+No match
+
+/^(a|)\1{2}b/
+    aaab
+ 0: aaab
+ 1: a
+    b
+ 0: b
+ 1: 
+    *** Failers
+No match
+    ab
+No match
+    aab
+No match
+    aaaab
+No match
+
+/^(a|)\1{2,3}b/
+    aaab
+ 0: aaab
+ 1: a
+    aaaab
+ 0: aaaab
+ 1: a
+    b
+ 0: b
+ 1: 
+    *** Failers
+No match
+    ab
+No match
+    aab
+No match
+    aaaaab
+No match
+
+/ab{1,3}bc/
+    abbbbc
+ 0: abbbbc
+    abbbc
+ 0: abbbc
+    abbc
+ 0: abbc
+    *** Failers
+No match
+    abc
+No match
+    abbbbbc
+No match
+
+/([^.]*)\.([^:]*):[T ]+(.*)/
+    track1.title:TBlah blah blah
+ 0: track1.title:TBlah blah blah
+ 1: track1
+ 2: title
+ 3: Blah blah blah
+
+/([^.]*)\.([^:]*):[T ]+(.*)/i
+    track1.title:TBlah blah blah
+ 0: track1.title:TBlah blah blah
+ 1: track1
+ 2: title
+ 3: Blah blah blah
+
+/([^.]*)\.([^:]*):[t ]+(.*)/i
+    track1.title:TBlah blah blah
+ 0: track1.title:TBlah blah blah
+ 1: track1
+ 2: title
+ 3: Blah blah blah
+
+/^[W-c]+$/
+    WXY_^abc
+ 0: WXY_^abc
+    ***Failers
+No match
+    wxy
+No match
+
+/^[W-c]+$/i
+    WXY_^abc
+ 0: WXY_^abc
+    wxy_^ABC
+ 0: wxy_^ABC
+
+/^[\x3f-\x5F]+$/i
+    WXY_^abc
+ 0: WXY_^abc
+    wxy_^ABC
+ 0: wxy_^ABC
+
+/^abc$/m
+    abc
+ 0: abc
+    qqq\nabc
+ 0: abc
+    abc\nzzz
+ 0: abc
+    qqq\nabc\nzzz
+ 0: abc
+
+/^abc$/
+    abc
+ 0: abc
+    *** Failers
+No match
+    qqq\nabc
+No match
+    abc\nzzz
+No match
+    qqq\nabc\nzzz
+No match
+
+/\Aabc\Z/m
+    abc
+ 0: abc
+    abc\n 
+ 0: abc
+    *** Failers
+No match
+    qqq\nabc
+No match
+    abc\nzzz
+No match
+    qqq\nabc\nzzz
+No match
+    
+/\A(.)*\Z/s
+    abc\ndef
+ 0: abc\x0adef
+ 1: f
+
+/\A(.)*\Z/m
+    *** Failers
+ 0: *** Failers
+ 1: s
+    abc\ndef
+No match
+
+/(?:b)|(?::+)/
+    b::c
+ 0: b
+    c::b
+ 0: ::
+
+/[-az]+/
+    az-
+ 0: az-
+    *** Failers
+ 0: a
+    b
+No match
+
+/[az-]+/
+    za-
+ 0: za-
+    *** Failers
+ 0: a
+    b
+No match
+
+/[a\-z]+/
+    a-z
+ 0: a-z
+    *** Failers
+ 0: a
+    b
+No match
+
+/[a-z]+/
+    abcdxyz
+ 0: abcdxyz
+
+/[\d-]+/
+    12-34
+ 0: 12-34
+    *** Failers
+No match
+    aaa
+No match
+
+/[\d-z]+/
+    12-34z
+ 0: 12-34z
+    *** Failers
+No match
+    aaa
+No match
+
+/\x5c/
+    \\
+ 0: \
+
+/\x20Z/
+    the Zoo
+ 0:  Z
+    *** Failers
+No match
+    Zulu
+No match
+
+/(abc)\1/i
+    abcabc
+ 0: abcabc
+ 1: abc
+    ABCabc
+ 0: ABCabc
+ 1: ABC
+    abcABC
+ 0: abcABC
+ 1: abc
+
+/(main(O)?)+/
+    mainmain
+ 0: mainmain
+ 1: main
+    mainOmain
+ 0: mainOmain
+ 1: main
+ 2: O
+
+/ab{3cd/
+    ab{3cd
+ 0: ab{3cd
+
+/ab{3,cd/
+    ab{3,cd
+ 0: ab{3,cd
+
+/ab{3,4a}cd/
+    ab{3,4a}cd
+ 0: ab{3,4a}cd
+
+/{4,5a}bc/
+    {4,5a}bc
+ 0: {4,5a}bc
+
+/^a.b/
+    a\rb
+ 0: a\x0db
+    *** Failers
+No match
+    a\nb
+No match
+
+/abc$/
+    abc
+ 0: abc
+    abc\n
+ 0: abc
+    *** Failers
+No match
+    abc\ndef
+No match
+
+/(abc)\123/
+    abc\x53
+ 0: abcS
+ 1: abc
+
+/(abc)\223/
+    abc\x93
+ 0: abc\x93
+ 1: abc
+
+/(abc)\323/
+    abc\xd3
+ 0: abc\xd3
+ 1: abc
+
+/(abc)\500/
+    abc\x40
+ 0: abc@
+ 1: abc
+    abc\100
+ 0: abc@
+ 1: abc
+
+/(abc)\5000/
+    abc\x400
+ 0: abc@0
+ 1: abc
+    abc\x40\x30
+ 0: abc@0
+ 1: abc
+    abc\1000
+ 0: abc@0
+ 1: abc
+    abc\100\x30
+ 0: abc@0
+ 1: abc
+    abc\100\060
+ 0: abc@0
+ 1: abc
+    abc\100\60
+ 0: abc@0
+ 1: abc
+
+/abc\81/
+    abc\081
+ 0: abc\x0081
+    abc\0\x38\x31
+ 0: abc\x0081
+
+/abc\91/
+    abc\091
+ 0: abc\x0091
+    abc\0\x39\x31
+ 0: abc\x0091
+
+/(a)(b)(c)(d)(e)(f)(g)(h)(i)(j)(k)(l)\12\123/
+    abcdefghijkllS
+ 0: abcdefghijkllS
+ 1: a
+ 2: b
+ 3: c
+ 4: d
+ 5: e
+ 6: f
+ 7: g
+ 8: h
+ 9: i
+10: j
+11: k
+12: l
+
+/(a)(b)(c)(d)(e)(f)(g)(h)(i)(j)(k)\12\123/
+    abcdefghijk\12S
+ 0: abcdefghijk\x0aS
+ 1: a
+ 2: b
+ 3: c
+ 4: d
+ 5: e
+ 6: f
+ 7: g
+ 8: h
+ 9: i
+10: j
+11: k
+
+/ab\gdef/
+    abgdef
+ 0: abgdef
+
+/a{0}bc/
+    bc
+ 0: bc
+
+/(a|(bc)){0,0}?xyz/
+    xyz
+ 0: xyz
+
+/abc[\10]de/
+    abc\010de
+ 0: abc\x08de
+
+/abc[\1]de/
+    abc\1de
+ 0: abc\x01de
+
+/(abc)[\1]de/
+    abc\1de
+ 0: abc\x01de
+ 1: abc
+
+/a.b(?s)/
+    a\nb
+ 0: a\x0ab
+
+/^([^a])([^\b])([^c]*)([^d]{3,4})/
+    baNOTccccd
+ 0: baNOTcccc
+ 1: b
+ 2: a
+ 3: NOT
+ 4: cccc
+    baNOTcccd
+ 0: baNOTccc
+ 1: b
+ 2: a
+ 3: NOT
+ 4: ccc
+    baNOTccd
+ 0: baNOTcc
+ 1: b
+ 2: a
+ 3: NO
+ 4: Tcc
+    bacccd
+ 0: baccc
+ 1: b
+ 2: a
+ 3: 
+ 4: ccc
+    *** Failers
+ 0: *** Failers
+ 1: *
+ 2: *
+ 3: * Fail
+ 4: ers
+    anything
+No match
+    b\bc   
+No match
+    baccd
+No match
+
+/[^a]/
+    Abc
+ 0: A
+  
+/[^a]/i
+    Abc 
+ 0: b
+
+/[^a]+/
+    AAAaAbc
+ 0: AAA
+  
+/[^a]+/i
+    AAAaAbc 
+ 0: bc
+
+/[^a]+/
+    bbb\nccc
+ 0: bbb\x0accc
+   
+/[^k]$/
+    abc
+ 0: c
+    *** Failers
+ 0: s
+    abk   
+No match
+   
+/[^k]{2,3}$/
+    abc
+ 0: abc
+    kbc
+ 0: bc
+    kabc 
+ 0: abc
+    *** Failers
+ 0: ers
+    abk
+No match
+    akb
+No match
+    akk 
+No match
+
+/^\d{8,}\@.+[^k]$/
+    12345678\@a.b.c.d
+ 0: 12345678@a.b.c.d
+    123456789\@x.y.z
+ 0: 123456789@x.y.z
+    *** Failers
+No match
+    12345678\@x.y.uk
+No match
+    1234567\@a.b.c.d       
+No match
+
+/(a)\1{8,}/
+    aaaaaaaaa
+ 0: aaaaaaaaa
+ 1: a
+    aaaaaaaaaa
+ 0: aaaaaaaaaa
+ 1: a
+    *** Failers
+No match
+    aaaaaaa   
+No match
+
+/[^a]/
+    aaaabcd
+ 0: b
+    aaAabcd 
+ 0: A
+
+/[^a]/i
+    aaaabcd
+ 0: b
+    aaAabcd 
+ 0: b
+
+/[^az]/
+    aaaabcd
+ 0: b
+    aaAabcd 
+ 0: A
+
+/[^az]/i
+    aaaabcd
+ 0: b
+    aaAabcd 
+ 0: b
+
+/\000\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037\040\041\042\043\044\045\046\047\050\051\052\053\054\055\056\057\060\061\062\063\064\065\066\067\070\071\072\073\074\075\076\077\100\101\102\103\104\105\106\107\110\111\112\113\114\115\116\117\120\121\122\123\124\125\126\127\130\131\132\133\134\135\136\137\140\141\142\143\144\145\146\147\150\151\152\153\154\155\156\157\160\161\162\163\164\165\166\167\170\171\172\173\174\175\176\177\200\201\202\203\204\205\206\207\210\211\212\213\214\215\216\217\220\221\222\223\224\225\226\227\230\231\232\233\234\235\236\237\240\241\242\243\244\245\246\247\250\251\252\253\254\255\256\257\260\261\262\263\264\265\266\267\270\271\272\273\274\275\276\277\300\301\302\303\304\305\306\307\310\311\312\313\314\315\316\317\320\321\322\323\324\325\326\327\330\331\332\333\334\335\336\337\340\341\342\343\344\345\346\347\350\351\352\353\354\355\356\357\360\361\362\363\364\365\366\367\370\371\372\373\374\375\376\377/
+ \000\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037\040\041\042\043\044\045\046\047\050\051\052\053\054\055\056\057\060\061\062\063\064\065\066\067\070\071\072\073\074\075\076\077\100\101\102\103\104\105\106\107\110\111\112\113\114\115\116\117\120\121\122\123\124\125\126\127\130\131\132\133\134\135\136\137\140\141\142\143\144\145\146\147\150\151\152\153\154\155\156\157\160\161\162\163\164\165\166\167\170\171\172\173\174\175\176\177\200\201\202\203\204\205\206\207\210\211\212\213\214\215\216\217\220\221\222\223\224\225\226\227\230\231\232\233\234\235\236\237\240\241\242\243\244\245\246\247\250\251\252\253\254\255\256\257\260\261\262\263\264\265\266\267\270\271\272\273\274\275\276\277\300\301\302\303\304\305\306\307\310\311\312\313\314\315\316\317\320\321\322\323\324\325\326\327\330\331\332\333\334\335\336\337\340\341\342\343\344\345\346\347\350\351\352\353\354\355\356\357\360\361\362\363\364\365\366\367\370\371\372\373\374\375\376\377
+ 0: \x00\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f\x10\x11\x12\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~\x7f\x80\x81\x82\x83\x84\x85\x86\x87\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f\x90\x91\x92\x93\x94\x95\x96\x97\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7\xe8\xe9\xea\xeb\xec\xed\xee\xef\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff
+
+/P[^*]TAIRE[^*]{1,6}?LL/
+    xxxxxxxxxxxPSTAIREISLLxxxxxxxxx
+ 0: PSTAIREISLL
+
+/P[^*]TAIRE[^*]{1,}?LL/
+    xxxxxxxxxxxPSTAIREISLLxxxxxxxxx
+ 0: PSTAIREISLL
+
+/(\.\d\d[1-9]?)\d+/
+    1.230003938
+ 0: .230003938
+ 1: .23
+    1.875000282   
+ 0: .875000282
+ 1: .875
+    1.235  
+ 0: .235
+ 1: .23
+                  
+/(\.\d\d((?=0)|\d(?=\d)))/
+    1.230003938      
+ 0: .23
+ 1: .23
+ 2: 
+    1.875000282
+ 0: .875
+ 1: .875
+ 2: 5
+    *** Failers 
+No match
+    1.235 
+No match
+    
+/a(?)b/
+    ab 
+ 0: ab
+ 
+/\b(foo)\s+(\w+)/i
+    Food is on the foo table
+ 0: foo table
+ 1: foo
+ 2: table
+    
+/foo(.*)bar/
+    The food is under the bar in the barn.
+ 0: food is under the bar in the bar
+ 1: d is under the bar in the 
+    
+/foo(.*?)bar/  
+    The food is under the bar in the barn.
+ 0: food is under the bar
+ 1: d is under the 
+
+/(.*)(\d*)/
+    I have 2 numbers: 53147
+ 0: I have 2 numbers: 53147
+ 1: I have 2 numbers: 53147
+ 2: 
+    
+/(.*)(\d+)/
+    I have 2 numbers: 53147
+ 0: I have 2 numbers: 53147
+ 1: I have 2 numbers: 5314
+ 2: 7
+ 
+/(.*?)(\d*)/
+    I have 2 numbers: 53147
+ 0: 
+ 1: 
+ 2: 
+
+/(.*?)(\d+)/
+    I have 2 numbers: 53147
+ 0: I have 2
+ 1: I have 
+ 2: 2
+
+/(.*)(\d+)$/
+    I have 2 numbers: 53147
+ 0: I have 2 numbers: 53147
+ 1: I have 2 numbers: 5314
+ 2: 7
+
+/(.*?)(\d+)$/
+    I have 2 numbers: 53147
+ 0: I have 2 numbers: 53147
+ 1: I have 2 numbers: 
+ 2: 53147
+
+/(.*)\b(\d+)$/
+    I have 2 numbers: 53147
+ 0: I have 2 numbers: 53147
+ 1: I have 2 numbers: 
+ 2: 53147
+
+/(.*\D)(\d+)$/
+    I have 2 numbers: 53147
+ 0: I have 2 numbers: 53147
+ 1: I have 2 numbers: 
+ 2: 53147
+
+/^\D*(?!123)/
+    ABC123
+ 0: AB
+     
+/^(\D*)(?=\d)(?!123)/
+    ABC445
+ 0: ABC
+ 1: ABC
+    *** Failers
+No match
+    ABC123
+No match
+    
+/^[W-]46]/
+    W46]789 
+ 0: W46]
+    -46]789
+ 0: -46]
+    *** Failers
+No match
+    Wall
+No match
+    Zebra
+No match
+    42
+No match
+    [abcd] 
+No match
+    ]abcd[
+No match
+       
+/^[W-\]46]/
+    W46]789 
+ 0: W
+    Wall
+ 0: W
+    Zebra
+ 0: Z
+    Xylophone  
+ 0: X
+    42
+ 0: 4
+    [abcd] 
+ 0: [
+    ]abcd[
+ 0: ]
+    \\backslash 
+ 0: \
+    *** Failers
+No match
+    -46]789
+No match
+    well
+No match
+    
+/\d\d\/\d\d\/\d\d\d\d/
+    01/01/2000
+ 0: 01/01/2000
+
+/word (?:[a-zA-Z0-9]+ ){0,10}otherword/
+  word cat dog elephant mussel cow horse canary baboon snake shark otherword
+ 0: word cat dog elephant mussel cow horse canary baboon snake shark otherword
+  word cat dog elephant mussel cow horse canary baboon snake shark
+No match
+
+/word (?:[a-zA-Z0-9]+ ){0,300}otherword/
+  word cat dog elephant mussel cow horse canary baboon snake shark the quick brown fox and the lazy dog and several other words getting close to thirty by now I hope
+No match
+
+/^(a){0,0}/
+    bcd
+ 0: 
+    abc
+ 0: 
+    aab     
+ 0: 
+
+/^(a){0,1}/
+    bcd
+ 0: 
+    abc
+ 0: a
+ 1: a
+    aab  
+ 0: a
+ 1: a
+
+/^(a){0,2}/
+    bcd
+ 0: 
+    abc
+ 0: a
+ 1: a
+    aab  
+ 0: aa
+ 1: a
+
+/^(a){0,3}/
+    bcd
+ 0: 
+    abc
+ 0: a
+ 1: a
+    aab
+ 0: aa
+ 1: a
+    aaa   
+ 0: aaa
+ 1: a
+
+/^(a){0,}/
+    bcd
+ 0: 
+    abc
+ 0: a
+ 1: a
+    aab
+ 0: aa
+ 1: a
+    aaa
+ 0: aaa
+ 1: a
+    aaaaaaaa    
+ 0: aaaaaaaa
+ 1: a
+
+/^(a){1,1}/
+    bcd
+No match
+    abc
+ 0: a
+ 1: a
+    aab  
+ 0: a
+ 1: a
+
+/^(a){1,2}/
+    bcd
+No match
+    abc
+ 0: a
+ 1: a
+    aab  
+ 0: aa
+ 1: a
+
+/^(a){1,3}/
+    bcd
+No match
+    abc
+ 0: a
+ 1: a
+    aab
+ 0: aa
+ 1: a
+    aaa   
+ 0: aaa
+ 1: a
+
+/^(a){1,}/
+    bcd
+No match
+    abc
+ 0: a
+ 1: a
+    aab
+ 0: aa
+ 1: a
+    aaa
+ 0: aaa
+ 1: a
+    aaaaaaaa    
+ 0: aaaaaaaa
+ 1: a
+
+/.*\.gif/
+    borfle\nbib.gif\nno
+ 0: bib.gif
+
+/.{0,}\.gif/
+    borfle\nbib.gif\nno
+ 0: bib.gif
+
+/.*\.gif/m
+    borfle\nbib.gif\nno
+ 0: bib.gif
+
+/.*\.gif/s
+    borfle\nbib.gif\nno
+ 0: borfle\x0abib.gif
+
+/.*\.gif/ms
+    borfle\nbib.gif\nno
+ 0: borfle\x0abib.gif
+    
+/.*$/
+    borfle\nbib.gif\nno
+ 0: no
+
+/.*$/m
+    borfle\nbib.gif\nno
+ 0: borfle
+
+/.*$/s
+    borfle\nbib.gif\nno
+ 0: borfle\x0abib.gif\x0ano
+
+/.*$/ms
+    borfle\nbib.gif\nno
+ 0: borfle\x0abib.gif\x0ano
+    
+/.*$/
+    borfle\nbib.gif\nno\n
+ 0: no
+
+/.*$/m
+    borfle\nbib.gif\nno\n
+ 0: borfle
+
+/.*$/s
+    borfle\nbib.gif\nno\n
+ 0: borfle\x0abib.gif\x0ano\x0a
+
+/.*$/ms
+    borfle\nbib.gif\nno\n
+ 0: borfle\x0abib.gif\x0ano\x0a
+    
+/(.*X|^B)/
+    abcde\n1234Xyz
+ 0: 1234X
+ 1: 1234X
+    BarFoo 
+ 0: B
+ 1: B
+    *** Failers
+No match
+    abcde\nBar  
+No match
+
+/(.*X|^B)/m
+    abcde\n1234Xyz
+ 0: 1234X
+ 1: 1234X
+    BarFoo 
+ 0: B
+ 1: B
+    abcde\nBar  
+ 0: B
+ 1: B
+
+/(.*X|^B)/s
+    abcde\n1234Xyz
+ 0: abcde\x0a1234X
+ 1: abcde\x0a1234X
+    BarFoo 
+ 0: B
+ 1: B
+    *** Failers
+No match
+    abcde\nBar  
+No match
+
+/(.*X|^B)/ms
+    abcde\n1234Xyz
+ 0: abcde\x0a1234X
+ 1: abcde\x0a1234X
+    BarFoo 
+ 0: B
+ 1: B
+    abcde\nBar  
+ 0: B
+ 1: B
+
+/(?s)(.*X|^B)/
+    abcde\n1234Xyz
+ 0: abcde\x0a1234X
+ 1: abcde\x0a1234X
+    BarFoo 
+ 0: B
+ 1: B
+    *** Failers 
+No match
+    abcde\nBar  
+No match
+
+/(?s:.*X|^B)/
+    abcde\n1234Xyz
+ 0: abcde\x0a1234X
+    BarFoo 
+ 0: B
+    *** Failers 
+No match
+    abcde\nBar  
+No match
+
+/^.*B/
+    **** Failers
+No match
+    abc\nB
+No match
+     
+/(?s)^.*B/
+    abc\nB
+ 0: abc\x0aB
+
+/(?m)^.*B/
+    abc\nB
+ 0: B
+     
+/(?ms)^.*B/
+    abc\nB
+ 0: abc\x0aB
+
+/(?ms)^B/
+    abc\nB
+ 0: B
+
+/(?s)B$/
+    B\n
+ 0: B
+
+/^[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]/
+    123456654321
+ 0: 123456654321
+  
+/^\d\d\d\d\d\d\d\d\d\d\d\d/
+    123456654321 
+ 0: 123456654321
+
+/^[\d][\d][\d][\d][\d][\d][\d][\d][\d][\d][\d][\d]/
+    123456654321
+ 0: 123456654321
+  
+/^[abc]{12}/
+    abcabcabcabc
+ 0: abcabcabcabc
+    
+/^[a-c]{12}/
+    abcabcabcabc
+ 0: abcabcabcabc
+    
+/^(a|b|c){12}/
+    abcabcabcabc 
+ 0: abcabcabcabc
+ 1: c
+
+/^[abcdefghijklmnopqrstuvwxy0123456789]/
+    n
+ 0: n
+    *** Failers 
+No match
+    z 
+No match
+
+/abcde{0,0}/
+    abcd
+ 0: abcd
+    *** Failers
+No match
+    abce  
+No match
+
+/ab[cd]{0,0}e/
+    abe
+ 0: abe
+    *** Failers
+No match
+    abcde 
+No match
+    
+/ab(c){0,0}d/
+    abd
+ 0: abd
+    *** Failers
+No match
+    abcd   
+No match
+
+/a(b*)/
+    a
+ 0: a
+ 1: 
+    ab
+ 0: ab
+ 1: b
+    abbbb
+ 0: abbbb
+ 1: bbbb
+    *** Failers
+ 0: a
+ 1: 
+    bbbbb    
+No match
+    
+/ab\d{0}e/
+    abe
+ 0: abe
+    *** Failers
+No match
+    ab1e   
+No match
+    
+/"([^\\"]+|\\.)*"/
+    the \"quick\" brown fox
+ 0: "quick"
+ 1: quick
+    \"the \\\"quick\\\" brown fox\" 
+ 0: "the \"quick\" brown fox"
+ 1:  brown fox
+
+/.*?/g+
+    abc
+ 0: 
+ 0+ abc
+ 0: a
+ 0+ bc
+ 0: 
+ 0+ bc
+ 0: b
+ 0+ c
+ 0: 
+ 0+ c
+ 0: c
+ 0+ 
+ 0: 
+ 0+ 
+  
+/\b/g+
+    abc 
+ 0: 
+ 0+ abc
+ 0: 
+ 0+ 
+
+/\b/+g
+    abc 
+ 0: 
+ 0+ abc
+ 0: 
+ 0+ 
+
+//g
+    abc
+ 0: 
+ 0: 
+ 0: 
+ 0: 
+
+/ End of test input /
+
diff --git a/srclib/pcre/testdata/testoutput2 b/srclib/pcre/testdata/testoutput2
new file mode 100644
index 0000000000..d0fc036f0f
--- /dev/null
+++ b/srclib/pcre/testdata/testoutput2
@@ -0,0 +1,2072 @@
+PCRE version 3.1 09-Feb-2000
+
+/(a)b|/
+Capturing subpattern count = 1
+No options
+No first char
+No need char
+
+/abc/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'c'
+    abc
+ 0: abc
+    defabc
+ 0: abc
+    \Aabc
+ 0: abc
+    *** Failers
+No match
+    \Adefabc
+No match
+    ABC
+No match
+
+/^abc/
+Capturing subpattern count = 0
+Options: anchored
+No first char
+Need char = 'c'
+    abc
+ 0: abc
+    \Aabc
+ 0: abc
+    *** Failers
+No match
+    defabc
+No match
+    \Adefabc
+No match
+
+/a+bc/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'c'
+
+/a*bc/
+Capturing subpattern count = 0
+No options
+No first char
+Need char = 'c'
+
+/a{3}bc/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'c'
+
+/(abc|a+z)/
+Capturing subpattern count = 1
+No options
+First char = 'a'
+No need char
+
+/^abc$/
+Capturing subpattern count = 0
+Options: anchored
+No first char
+Need char = 'c'
+    abc
+ 0: abc
+    *** Failers
+No match
+    def\nabc
+No match
+
+/ab\gdef/X
+Failed: unrecognized character follows \ at offset 3
+
+/(?X)ab\gdef/X
+Failed: unrecognized character follows \ at offset 7
+
+/x{5,4}/
+Failed: numbers out of order in {} quantifier at offset 5
+
+/z{65536}/
+Failed: number too big in {} quantifier at offset 7
+
+/[abcd/
+Failed: missing terminating ] for character class at offset 5
+
+/[\B]/
+Failed: invalid escape sequence in character class at offset 2
+
+/[a-\w]/
+Failed: invalid escape sequence in character class at offset 4
+
+/[z-a]/
+Failed: range out of order in character class at offset 3
+
+/^*/
+Failed: nothing to repeat at offset 1
+
+/(abc/
+Failed: missing ) at offset 4
+
+/(?# abc/
+Failed: missing ) after comment at offset 7
+
+/(?z)abc/
+Failed: unrecognized character after (? at offset 2
+
+/.*b/
+Capturing subpattern count = 0
+No options
+First char at start or follows \n
+Need char = 'b'
+
+/.*?b/
+Capturing subpattern count = 0
+No options
+First char at start or follows \n
+Need char = 'b'
+
+/cat|dog|elephant/
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+    this sentence eventually mentions a cat
+ 0: cat
+    this sentences rambles on and on for a while and then reaches elephant
+ 0: elephant
+
+/cat|dog|elephant/S
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+Starting character set: c d e 
+    this sentence eventually mentions a cat
+ 0: cat
+    this sentences rambles on and on for a while and then reaches elephant
+ 0: elephant
+
+/cat|dog|elephant/iS
+Capturing subpattern count = 0
+Options: caseless
+No first char
+No need char
+Starting character set: C D E c d e 
+    this sentence eventually mentions a CAT cat
+ 0: CAT
+    this sentences rambles on and on for a while to elephant ElePhant
+ 0: elephant
+
+/a|[bcd]/S
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+Starting character set: a b c d 
+
+/(a|[^\dZ])/S
+Capturing subpattern count = 1
+No options
+No first char
+No need char
+Starting character set: \x00 \x01 \x02 \x03 \x04 \x05 \x06 \x07 \x08 \x09 \x0a 
+  \x0b \x0c \x0d \x0e \x0f \x10 \x11 \x12 \x13 \x14 \x15 \x16 \x17 \x18 \x19 
+  \x1a \x1b \x1c \x1d \x1e \x1f \x20 ! " # $ % & ' ( ) * + , - . / : ; < = > 
+  ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y [ \ ] ^ _ ` a b c d 
+  e f g h i j k l m n o p q r s t u v w x y z { | } ~ \x7f \x80 \x81 \x82 \x83 
+  \x84 \x85 \x86 \x87 \x88 \x89 \x8a \x8b \x8c \x8d \x8e \x8f \x90 \x91 \x92 
+  \x93 \x94 \x95 \x96 \x97 \x98 \x99 \x9a \x9b \x9c \x9d \x9e \x9f \xa0 \xa1 
+  \xa2 \xa3 \xa4 \xa5 \xa6 \xa7 \xa8 \xa9 \xaa \xab \xac \xad \xae \xaf \xb0 
+  \xb1 \xb2 \xb3 \xb4 \xb5 \xb6 \xb7 \xb8 \xb9 \xba \xbb \xbc \xbd \xbe \xbf 
+  \xc0 \xc1 \xc2 \xc3 \xc4 \xc5 \xc6 \xc7 \xc8 \xc9 \xca \xcb \xcc \xcd \xce 
+  \xcf \xd0 \xd1 \xd2 \xd3 \xd4 \xd5 \xd6 \xd7 \xd8 \xd9 \xda \xdb \xdc \xdd 
+  \xde \xdf \xe0 \xe1 \xe2 \xe3 \xe4 \xe5 \xe6 \xe7 \xe8 \xe9 \xea \xeb \xec 
+  \xed \xee \xef \xf0 \xf1 \xf2 \xf3 \xf4 \xf5 \xf6 \xf7 \xf8 \xf9 \xfa \xfb 
+  \xfc \xfd \xfe \xff 
+
+/(a|b)*[\s]/S
+Capturing subpattern count = 1
+No options
+No first char
+No need char
+Starting character set: \x09 \x0a \x0b \x0c \x0d \x20 a b 
+
+/(ab\2)/
+Failed: back reference to non-existent subpattern at offset 6
+
+/{4,5}abc/
+Failed: nothing to repeat at offset 4
+
+/(a)(b)(c)\2/
+Capturing subpattern count = 3
+Max back reference = 2
+No options
+First char = 'a'
+Need char = 'c'
+    abcb
+ 0: abcb
+ 1: a
+ 2: b
+ 3: c
+    \O0abcb
+Matched, but too many substrings
+    \O3abcb
+Matched, but too many substrings
+ 0: abcb
+    \O6abcb
+Matched, but too many substrings
+ 0: abcb
+ 1: a
+    \O9abcb
+Matched, but too many substrings
+ 0: abcb
+ 1: a
+ 2: b
+    \O12abcb 
+ 0: abcb
+ 1: a
+ 2: b
+ 3: c
+
+/(a)bc|(a)(b)\2/
+Capturing subpattern count = 3
+Max back reference = 2
+No options
+First char = 'a'
+No need char
+    abc
+ 0: abc
+ 1: a
+    \O0abc
+Matched, but too many substrings
+    \O3abc
+Matched, but too many substrings
+ 0: abc
+    \O6abc
+ 0: abc
+ 1: a
+    aba
+ 0: aba
+ 1: <unset>
+ 2: a
+ 3: b
+    \O0aba
+Matched, but too many substrings
+    \O3aba
+Matched, but too many substrings
+ 0: aba
+    \O6aba
+Matched, but too many substrings
+ 0: aba
+ 1: <unset>
+    \O9aba
+Matched, but too many substrings
+ 0: aba
+ 1: <unset>
+ 2: a
+    \O12aba
+ 0: aba
+ 1: <unset>
+ 2: a
+ 3: b
+
+/abc$/E
+Capturing subpattern count = 0
+Options: dollar_endonly
+First char = 'a'
+Need char = 'c'
+    abc
+ 0: abc
+    *** Failers
+No match
+    abc\n
+No match
+    abc\ndef
+No match
+
+/(a)(b)(c)(d)(e)\6/
+Failed: back reference to non-existent subpattern at offset 17
+
+/the quick brown fox/
+Capturing subpattern count = 0
+No options
+First char = 't'
+Need char = 'x'
+    the quick brown fox
+ 0: the quick brown fox
+    this is a line with the quick brown fox
+ 0: the quick brown fox
+
+/the quick brown fox/A
+Capturing subpattern count = 0
+Options: anchored
+No first char
+Need char = 'x'
+    the quick brown fox
+ 0: the quick brown fox
+    *** Failers
+No match
+    this is a line with the quick brown fox
+No match
+
+/ab(?z)cd/
+Failed: unrecognized character after (? at offset 4
+
+/^abc|def/
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+    abcdef
+ 0: abc
+    abcdef\B
+ 0: def
+
+/.*((abc)$|(def))/
+Capturing subpattern count = 3
+No options
+First char at start or follows \n
+No need char
+    defabc
+ 0: defabc
+ 1: abc
+ 2: abc
+    \Zdefabc
+ 0: def
+ 1: def
+ 2: <unset>
+ 3: def
+
+/abc/P
+    abc
+ 0: abc
+    *** Failers
+No match: POSIX code 17: match failed
+    
+/^abc|def/P
+    abcdef
+ 0: abc
+    abcdef\B
+ 0: def
+
+/.*((abc)$|(def))/P
+    defabc
+ 0: defabc
+ 1: abc
+ 2: abc
+    \Zdefabc
+ 0: def
+ 1: def
+ 3: def
+  
+/the quick brown fox/P
+    the quick brown fox
+ 0: the quick brown fox
+    *** Failers 
+No match: POSIX code 17: match failed
+    The Quick Brown Fox 
+No match: POSIX code 17: match failed
+
+/the quick brown fox/Pi
+    the quick brown fox
+ 0: the quick brown fox
+    The Quick Brown Fox 
+ 0: The Quick Brown Fox
+
+/abc.def/P
+    *** Failers
+No match: POSIX code 17: match failed
+    abc\ndef
+No match: POSIX code 17: match failed
+    
+/abc$/P
+    abc
+ 0: abc
+    abc\n 
+ 0: abc
+
+/(abc)\2/P
+Failed: POSIX code 15: bad back reference at offset 7     
+
+/(abc\1)/P
+    abc
+No match: POSIX code 17: match failed
+
+/)/
+Failed: unmatched parentheses at offset 0
+
+/a[]b/
+Failed: missing terminating ] for character class at offset 4
+
+/[^aeiou ]{3,}/
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+    co-processors, and for 
+ 0: -pr
+    
+/<.*>/
+Capturing subpattern count = 0
+No options
+First char = '<'
+Need char = '>'
+    abc<def>ghi<klm>nop
+ 0: <def>ghi<klm>
+
+/<.*?>/
+Capturing subpattern count = 0
+No options
+First char = '<'
+Need char = '>'
+    abc<def>ghi<klm>nop
+ 0: <def>
+
+/<.*>/U
+Capturing subpattern count = 0
+Options: ungreedy
+First char = '<'
+Need char = '>'
+    abc<def>ghi<klm>nop
+ 0: <def>
+    
+/<.*>(?U)/
+Capturing subpattern count = 0
+Options: ungreedy
+First char = '<'
+Need char = '>'
+    abc<def>ghi<klm>nop
+ 0: <def>
+
+/<.*?>/U
+Capturing subpattern count = 0
+Options: ungreedy
+First char = '<'
+Need char = '>'
+    abc<def>ghi<klm>nop
+ 0: <def>ghi<klm>
+    
+/={3,}/U
+Capturing subpattern count = 0
+Options: ungreedy
+First char = '='
+Need char = '='
+    abc========def
+ 0: ===
+    
+/(?U)={3,}?/
+Capturing subpattern count = 0
+Options: ungreedy
+First char = '='
+Need char = '='
+    abc========def
+ 0: ========
+    
+/(?<!bar|cattle)foo/
+Capturing subpattern count = 0
+No options
+First char = 'f'
+Need char = 'o'
+    foo
+ 0: foo
+    catfoo 
+ 0: foo
+    *** Failers
+No match
+    the barfoo
+No match
+    and cattlefoo   
+No match
+
+/(?<=a+)b/
+Failed: lookbehind assertion is not fixed length at offset 6
+
+/(?<=aaa|b{0,3})b/
+Failed: lookbehind assertion is not fixed length at offset 14
+
+/(?<!(foo)a\1)bar/
+Failed: lookbehind assertion is not fixed length at offset 12
+
+/(?i)abc/
+Capturing subpattern count = 0
+Options: caseless
+First char = 'a'
+Need char = 'c'
+
+/(a|(?m)a)/
+Capturing subpattern count = 1
+No options
+First char = 'a'
+No need char
+
+/(?i)^1234/
+Capturing subpattern count = 0
+Options: anchored caseless
+No first char
+Need char = '4'
+
+/(^b|(?i)^d)/
+Capturing subpattern count = 1
+Options: anchored
+Case state changes
+No first char
+No need char
+
+/(?s).*/
+Capturing subpattern count = 0
+Options: anchored dotall
+No first char
+No need char
+
+/[abcd]/S
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+Starting character set: a b c d 
+
+/(?i)[abcd]/S
+Capturing subpattern count = 0
+Options: caseless
+No first char
+No need char
+Starting character set: A B C D a b c d 
+
+/(?m)[xy]|(b|c)/S
+Capturing subpattern count = 1
+Options: multiline
+No first char
+No need char
+Starting character set: b c x y 
+
+/(^a|^b)/m
+Capturing subpattern count = 1
+Options: multiline
+First char at start or follows \n
+No need char
+
+/(?i)(^a|^b)/m
+Capturing subpattern count = 1
+Options: caseless multiline
+First char at start or follows \n
+No need char
+
+/(a)(?(1)a|b|c)/
+Failed: conditional group contains more than two branches at offset 13
+
+/(?(?=a)a|b|c)/
+Failed: conditional group contains more than two branches at offset 12
+
+/(?(1a)/
+Failed: malformed number after (?( at offset 4
+
+/(?(?i))/
+Failed: assertion expected after (?( at offset 3
+
+/(?(abc))/
+Failed: assertion expected after (?( at offset 3
+
+/(?(?<ab))/
+Failed: unrecognized character after (?< at offset 2
+
+/((?s)blah)\s+\1/
+Capturing subpattern count = 1
+Max back reference = 1
+No options
+First char = 'b'
+Need char = 'h'
+
+/((?i)blah)\s+\1/
+Capturing subpattern count = 1
+Max back reference = 1
+No options
+Case state changes
+No first char
+Need char = 'h'
+
+/((?i)b)/DS
+------------------------------------------------------------------
+  0  16 Bra 0
+  3   8 Bra 1
+  6  01 Opt
+  8   1 b
+ 11   8 Ket
+ 14  00 Opt
+ 16  16 Ket
+ 19     End
+------------------------------------------------------------------
+Capturing subpattern count = 1
+No options
+Case state changes
+No first char
+Need char = 'b'
+Starting character set: B b 
+
+/(a*b|(?i:c*(?-i)d))/S
+Capturing subpattern count = 1
+No options
+Case state changes
+No first char
+No need char
+Starting character set: C a b c d 
+
+/a$/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+No need char
+    a
+ 0: a
+    a\n
+ 0: a
+    *** Failers 
+No match
+    \Za
+No match
+    \Za\n   
+No match
+
+/a$/m
+Capturing subpattern count = 0
+Options: multiline
+First char = 'a'
+No need char
+    a
+ 0: a
+    a\n
+ 0: a
+    \Za\n   
+ 0: a
+    *** Failers 
+No match
+    \Za
+No match
+    
+/\Aabc/m
+Capturing subpattern count = 0
+Options: anchored multiline
+No first char
+Need char = 'c'
+
+/^abc/m 
+Capturing subpattern count = 0
+Options: multiline
+First char at start or follows \n
+Need char = 'c'
+
+/^((a+)(?U)([ab]+)(?-U)([bc]+)(\w*))/
+Capturing subpattern count = 5
+Options: anchored
+No first char
+Need char = 'a'
+  aaaaabbbbbcccccdef
+ 0: aaaaabbbbbcccccdef
+ 1: aaaaabbbbbcccccdef
+ 2: aaaaa
+ 3: b
+ 4: bbbbccccc
+ 5: def
+
+/(?<=foo)[ab]/S
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+Starting character set: a b 
+
+/(?<!foo)(alpha|omega)/S
+Capturing subpattern count = 1
+No options
+No first char
+Need char = 'a'
+Starting character set: a o 
+
+/(?!alphabet)[ab]/S
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+Starting character set: a b 
+
+/(?<=foo\n)^bar/m
+Capturing subpattern count = 0
+Options: multiline
+First char at start or follows \n
+Need char = 'r'
+
+/(?>^abc)/m
+Capturing subpattern count = 0
+Options: multiline
+First char at start or follows \n
+Need char = 'c'
+    abc
+ 0: abc
+    def\nabc
+ 0: abc
+    *** Failers
+No match
+    defabc   
+No match
+
+/(?<=ab(c+)d)ef/
+Failed: lookbehind assertion is not fixed length at offset 11
+
+/(?<=ab(?<=c+)d)ef/
+Failed: lookbehind assertion is not fixed length at offset 12
+
+/(?<=ab(c|de)f)g/
+Failed: lookbehind assertion is not fixed length at offset 13
+
+/The next three are in testinput2 because they have variable length branches/
+Capturing subpattern count = 0
+No options
+First char = 'T'
+Need char = 's'
+
+/(?<=bullock|donkey)-cart/
+Capturing subpattern count = 0
+No options
+First char = '-'
+Need char = 't'
+    the bullock-cart
+ 0: -cart
+    a donkey-cart race
+ 0: -cart
+    *** Failers
+No match
+    cart
+No match
+    horse-and-cart    
+No match
+      
+/(?<=ab(?i)x|y|z)/
+Capturing subpattern count = 0
+No options
+Case state changes
+No first char
+No need char
+
+/(?>.*)(?<=(abcd)|(xyz))/
+Capturing subpattern count = 2
+No options
+First char at start or follows \n
+No need char
+    alphabetabcd
+ 0: alphabetabcd
+ 1: abcd
+    endingxyz
+ 0: endingxyz
+ 1: <unset>
+ 2: xyz
+
+/(?<=ab(?i)x(?-i)y|(?i)z|b)ZZ/
+Capturing subpattern count = 0
+No options
+Case state changes
+First char = 'Z'
+Need char = 'Z'
+    abxyZZ
+ 0: ZZ
+    abXyZZ
+ 0: ZZ
+    ZZZ
+ 0: ZZ
+    zZZ
+ 0: ZZ
+    bZZ
+ 0: ZZ
+    BZZ     
+ 0: ZZ
+    *** Failers
+No match
+    ZZ 
+No match
+    abXYZZ 
+No match
+    zzz
+No match
+    bzz  
+No match
+
+/(?<!(foo)a)bar/
+Capturing subpattern count = 1
+No options
+First char = 'b'
+Need char = 'r'
+    bar
+ 0: bar
+    foobbar 
+ 0: bar
+    *** Failers
+No match
+    fooabar  
+No match
+
+/This one is here because Perl 5.005_02 doesn't fail it/
+Capturing subpattern count = 0
+No options
+First char = 'T'
+Need char = 't'
+
+/^(a)?(?(1)a|b)+$/
+Capturing subpattern count = 1
+Options: anchored
+No first char
+No need char
+    *** Failers
+No match
+    a 
+No match
+
+/This one is here because I think Perl 5.005_02 gets the setting of $1 wrong/
+Capturing subpattern count = 0
+No options
+First char = 'T'
+Need char = 'g'
+
+/^(a\1?){4}$/
+Capturing subpattern count = 1
+Max back reference = 1
+Options: anchored
+No first char
+Need char = 'a'
+    aaaaaa
+ 0: aaaaaa
+ 1: aa
+    
+/These are syntax tests from Perl 5.005/
+Capturing subpattern count = 0
+No options
+First char = 'T'
+Need char = '5'
+
+/a[b-a]/
+Failed: range out of order in character class at offset 4
+
+/a[]b/
+Failed: missing terminating ] for character class at offset 4
+
+/a[/
+Failed: missing terminating ] for character class at offset 2
+
+/*a/
+Failed: nothing to repeat at offset 0
+
+/(*)b/
+Failed: nothing to repeat at offset 1
+
+/abc)/
+Failed: unmatched parentheses at offset 3
+
+/(abc/
+Failed: missing ) at offset 4
+
+/a**/
+Failed: nothing to repeat at offset 2
+
+/)(/
+Failed: unmatched parentheses at offset 0
+
+/\1/
+Failed: back reference to non-existent subpattern at offset 2
+
+/\2/
+Failed: back reference to non-existent subpattern at offset 2
+
+/(a)|\2/
+Failed: back reference to non-existent subpattern at offset 6
+
+/a[b-a]/i
+Failed: range out of order in character class at offset 4
+
+/a[]b/i
+Failed: missing terminating ] for character class at offset 4
+
+/a[/i
+Failed: missing terminating ] for character class at offset 2
+
+/*a/i
+Failed: nothing to repeat at offset 0
+
+/(*)b/i
+Failed: nothing to repeat at offset 1
+
+/abc)/i
+Failed: unmatched parentheses at offset 3
+
+/(abc/i
+Failed: missing ) at offset 4
+
+/a**/i
+Failed: nothing to repeat at offset 2
+
+/)(/i
+Failed: unmatched parentheses at offset 0
+
+/:(?:/
+Failed: missing ) at offset 4
+
+/(?<%)b/
+Failed: unrecognized character after (?< at offset 0
+
+/a(?{)b/
+Failed: unrecognized character after (? at offset 3
+
+/a(?{{})b/
+Failed: unrecognized character after (? at offset 3
+
+/a(?{}})b/
+Failed: unrecognized character after (? at offset 3
+
+/a(?{"{"})b/
+Failed: unrecognized character after (? at offset 3
+
+/a(?{"{"}})b/
+Failed: unrecognized character after (? at offset 3
+
+/(?(1?)a|b)/
+Failed: malformed number after (?( at offset 4
+
+/(?(1)a|b|c)/
+Failed: conditional group contains more than two branches at offset 10
+
+/[a[:xyz:/
+Failed: missing terminating ] for character class at offset 8
+
+/(?<=x+)y/
+Failed: lookbehind assertion is not fixed length at offset 6
+
+/a{37,17}/
+Failed: numbers out of order in {} quantifier at offset 7
+
+/abc/\
+Failed: \ at end of pattern at offset 4
+
+/abc/\P
+Failed: POSIX code 9: bad escape sequence at offset 4     
+
+/abc/\i
+Failed: \ at end of pattern at offset 4
+
+/(a)bc(d)/
+Capturing subpattern count = 2
+No options
+First char = 'a'
+Need char = 'd'
+    abcd
+ 0: abcd
+ 1: a
+ 2: d
+    abcd\C2
+ 0: abcd
+ 1: a
+ 2: d
+ 2C d (1)
+    abcd\C5
+ 0: abcd
+ 1: a
+ 2: d
+copy substring 5 failed -7
+     
+/(.{20})/
+Capturing subpattern count = 1
+No options
+No first char
+No need char
+    abcdefghijklmnopqrstuvwxyz
+ 0: abcdefghijklmnopqrst
+ 1: abcdefghijklmnopqrst
+    abcdefghijklmnopqrstuvwxyz\C1
+ 0: abcdefghijklmnopqrst
+ 1: abcdefghijklmnopqrst
+copy substring 1 failed -6
+    abcdefghijklmnopqrstuvwxyz\G1
+ 0: abcdefghijklmnopqrst
+ 1: abcdefghijklmnopqrst
+ 1G abcdefghijklmnopqrst (20)
+     
+/(.{15})/
+Capturing subpattern count = 1
+No options
+No first char
+No need char
+    abcdefghijklmnopqrstuvwxyz
+ 0: abcdefghijklmno
+ 1: abcdefghijklmno
+    abcdefghijklmnopqrstuvwxyz\C1\G1
+ 0: abcdefghijklmno
+ 1: abcdefghijklmno
+ 1C abcdefghijklmno (15)
+ 1G abcdefghijklmno (15)
+
+/(.{16})/
+Capturing subpattern count = 1
+No options
+No first char
+No need char
+    abcdefghijklmnopqrstuvwxyz
+ 0: abcdefghijklmnop
+ 1: abcdefghijklmnop
+    abcdefghijklmnopqrstuvwxyz\C1\G1\L
+ 0: abcdefghijklmnop
+ 1: abcdefghijklmnop
+copy substring 1 failed -6
+ 1G abcdefghijklmnop (16)
+ 0L abcdefghijklmnop
+ 1L abcdefghijklmnop
+    
+/^(a|(bc))de(f)/
+Capturing subpattern count = 3
+Options: anchored
+No first char
+Need char = 'f'
+    adef\G1\G2\G3\G4\L 
+ 0: adef
+ 1: a
+ 2: <unset>
+ 3: f
+ 1G a (1)
+ 2G  (0)
+ 3G f (1)
+get substring 4 failed -7
+ 0L adef
+ 1L a
+ 2L 
+ 3L f
+    bcdef\G1\G2\G3\G4\L 
+ 0: bcdef
+ 1: bc
+ 2: bc
+ 3: f
+ 1G bc (2)
+ 2G bc (2)
+ 3G f (1)
+get substring 4 failed -7
+ 0L bcdef
+ 1L bc
+ 2L bc
+ 3L f
+    adefghijk\C0 
+ 0: adef
+ 1: a
+ 2: <unset>
+ 3: f
+ 0C adef (4)
+    
+/^abc\00def/
+Capturing subpattern count = 0
+Options: anchored
+No first char
+Need char = 'f'
+    abc\00def\L\C0 
+ 0: abc\x00def
+ 0C abc (7)
+ 0L abc
+    
+/word ((?:[a-zA-Z0-9]+ )((?:[a-zA-Z0-9]+ )((?:[a-zA-Z0-9]+ )((?:[a-zA-Z0-9]+ 
+)((?:[a-zA-Z0-9]+ )((?:[a-zA-Z0-9]+ )((?:[a-zA-Z0-9]+ )((?:[a-zA-Z0-9]+ 
+)?)?)?)?)?)?)?)?)?otherword/M
+Memory allocation (code space): 428
+Capturing subpattern count = 8
+No options
+First char = 'w'
+Need char = 'd'
+
+/.*X/D
+------------------------------------------------------------------
+  0   8 Bra 0
+  3     Any*
+  5   1 X
+  8   8 Ket
+ 11     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+No options
+First char at start or follows \n
+Need char = 'X'
+
+/.*X/Ds
+------------------------------------------------------------------
+  0   8 Bra 0
+  3     Any*
+  5   1 X
+  8   8 Ket
+ 11     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored dotall
+No first char
+Need char = 'X'
+
+/(.*X|^B)/D
+------------------------------------------------------------------
+  0  21 Bra 0
+  3   8 Bra 1
+  6     Any*
+  8   1 X
+ 11   7 Alt
+ 14     ^
+ 15   1 B
+ 18  15 Ket
+ 21  21 Ket
+ 24     End
+------------------------------------------------------------------
+Capturing subpattern count = 1
+No options
+First char at start or follows \n
+No need char
+
+/(.*X|^B)/Ds
+------------------------------------------------------------------
+  0  21 Bra 0
+  3   8 Bra 1
+  6     Any*
+  8   1 X
+ 11   7 Alt
+ 14     ^
+ 15   1 B
+ 18  15 Ket
+ 21  21 Ket
+ 24     End
+------------------------------------------------------------------
+Capturing subpattern count = 1
+Options: anchored dotall
+No first char
+No need char
+    
+/(?s)(.*X|^B)/D
+------------------------------------------------------------------
+  0  21 Bra 0
+  3   8 Bra 1
+  6     Any*
+  8   1 X
+ 11   7 Alt
+ 14     ^
+ 15   1 B
+ 18  15 Ket
+ 21  21 Ket
+ 24     End
+------------------------------------------------------------------
+Capturing subpattern count = 1
+Options: anchored dotall
+No first char
+No need char
+
+/(?s:.*X|^B)/D
+------------------------------------------------------------------
+  0  27 Bra 0
+  3  10 Bra 0
+  6  04 Opt
+  8     Any*
+ 10   1 X
+ 13   9 Alt
+ 16  04 Opt
+ 18     ^
+ 19   1 B
+ 22  19 Ket
+ 25  00 Opt
+ 27  27 Ket
+ 30     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+No options
+First char at start or follows \n
+No need char
+
+/\Biss\B/+
+Capturing subpattern count = 0
+No options
+First char = 'i'
+Need char = 's'
+    Mississippi
+ 0: iss
+ 0+ issippi
+
+/\Biss\B/+P
+    Mississippi
+ 0: iss
+ 0+ issippi
+
+/iss/G+
+Capturing subpattern count = 0
+No options
+First char = 'i'
+Need char = 's'
+    Mississippi
+ 0: iss
+ 0+ issippi
+ 0: iss
+ 0+ ippi
+
+/\Biss\B/G+
+Capturing subpattern count = 0
+No options
+First char = 'i'
+Need char = 's'
+    Mississippi
+ 0: iss
+ 0+ issippi
+
+/\Biss\B/g+
+Capturing subpattern count = 0
+No options
+First char = 'i'
+Need char = 's'
+    Mississippi
+ 0: iss
+ 0+ issippi
+ 0: iss
+ 0+ ippi
+    *** Failers
+No match
+    Mississippi\A
+No match
+
+/(?<=[Ms])iss/g+
+Capturing subpattern count = 0
+No options
+First char = 'i'
+Need char = 's'
+    Mississippi
+ 0: iss
+ 0+ issippi
+ 0: iss
+ 0+ ippi
+
+/(?<=[Ms])iss/G+
+Capturing subpattern count = 0
+No options
+First char = 'i'
+Need char = 's'
+    Mississippi
+ 0: iss
+ 0+ issippi
+
+/^iss/g+
+Capturing subpattern count = 0
+Options: anchored
+No first char
+Need char = 's'
+    ississippi
+ 0: iss
+ 0+ issippi
+    
+/.*iss/g+
+Capturing subpattern count = 0
+No options
+First char at start or follows \n
+Need char = 's'
+    abciss\nxyzisspqr 
+ 0: abciss
+ 0+ \x0axyzisspqr
+ 0: xyziss
+ 0+ pqr
+
+/.i./+g
+Capturing subpattern count = 0
+No options
+No first char
+Need char = 'i'
+    Mississippi
+ 0: Mis
+ 0+ sissippi
+ 0: sis
+ 0+ sippi
+ 0: sip
+ 0+ pi
+    Mississippi\A
+ 0: Mis
+ 0+ sissippi
+ 0: sis
+ 0+ sippi
+ 0: sip
+ 0+ pi
+    Missouri river
+ 0: Mis
+ 0+ souri river
+ 0: ri 
+ 0+ river
+ 0: riv
+ 0+ er
+    Missouri river\A  
+ 0: Mis
+ 0+ souri river
+
+/^.is/+g
+Capturing subpattern count = 0
+Options: anchored
+No first char
+Need char = 's'
+    Mississippi
+ 0: Mis
+ 0+ sissippi
+
+/^ab\n/g+
+Capturing subpattern count = 0
+Options: anchored
+No first char
+Need char = 10
+    ab\nab\ncd
+ 0: ab\x0a
+ 0+ ab\x0acd
+
+/^ab\n/mg+
+Capturing subpattern count = 0
+Options: multiline
+First char at start or follows \n
+Need char = 10
+    ab\nab\ncd
+ 0: ab\x0a
+ 0+ ab\x0acd
+ 0: ab\x0a
+ 0+ cd
+
+/abc/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'c'
+
+/abc|bac/
+Capturing subpattern count = 0
+No options
+No first char
+Need char = 'c'
+
+/(abc|bac)/
+Capturing subpattern count = 1
+No options
+No first char
+Need char = 'c'
+
+/(abc|(c|dc))/
+Capturing subpattern count = 2
+No options
+No first char
+Need char = 'c'
+
+/(abc|(d|de)c)/
+Capturing subpattern count = 2
+No options
+No first char
+Need char = 'c'
+
+/a*/
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+
+/a+/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+No need char
+
+/(baa|a+)/
+Capturing subpattern count = 1
+No options
+No first char
+Need char = 'a'
+
+/a{0,3}/
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+
+/baa{3,}/
+Capturing subpattern count = 0
+No options
+First char = 'b'
+Need char = 'a'
+
+/"([^\\"]+|\\.)*"/
+Capturing subpattern count = 1
+No options
+First char = '"'
+Need char = '"'
+
+/(abc|ab[cd])/
+Capturing subpattern count = 1
+No options
+First char = 'a'
+No need char
+
+/(a|.)/
+Capturing subpattern count = 1
+No options
+No first char
+No need char
+
+/a|ba|\w/
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+
+/abc(?=pqr)/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'r'
+
+/...(?<=abc)/
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+
+/abc(?!pqr)/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'c'
+
+/ab./
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'b'
+
+/ab[xyz]/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'b'
+
+/abc*/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'b'
+
+/ab.c*/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'b'
+
+/a.c*/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+No need char
+
+/.c*/
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+
+/ac*/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+No need char
+
+/(a.c*|b.c*)/
+Capturing subpattern count = 1
+No options
+No first char
+No need char
+
+/a.c*|aba/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+No need char
+
+/.+a/
+Capturing subpattern count = 0
+No options
+No first char
+Need char = 'a'
+
+/(?=abcda)a.*/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+No need char
+
+/(?=a)a.*/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+No need char
+
+/a(b)*/
+Capturing subpattern count = 1
+No options
+First char = 'a'
+No need char
+
+/a\d*/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+No need char
+
+/ab\d*/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'b'
+
+/a(\d)*/
+Capturing subpattern count = 1
+No options
+First char = 'a'
+No need char
+
+/abcde{0,0}/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'd'
+
+/ab\d+/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'b'
+
+/a(?(1)b)/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+No need char
+
+/a(?(1)bag|big)/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'g'
+
+/a(?(1)bag|big)*/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+No need char
+
+/a(?(1)bag|big)+/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'g'
+
+/a(?(1)b..|b..)/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'b'
+
+/ab\d{0}e/
+Capturing subpattern count = 0
+No options
+First char = 'a'
+Need char = 'e'
+
+/a?b?/
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+    a
+ 0: a
+    b
+ 0: b
+    ab
+ 0: ab
+    \
+ 0: 
+    *** Failers
+ 0: 
+    \N     
+No match
+    
+/|-/
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+    abcd
+ 0: 
+    -abc
+ 0: 
+    \Nab-c
+ 0: -
+    *** Failers
+ 0: 
+    \Nabc     
+No match
+
+/a*(b+)(z)(z)/P
+    aaaabbbbzzzz
+ 0: aaaabbbbzz
+ 1: bbbb
+ 2: z
+ 3: z
+    aaaabbbbzzzz\O0
+    aaaabbbbzzzz\O1
+ 0: aaaabbbbzz
+    aaaabbbbzzzz\O2
+ 0: aaaabbbbzz
+ 1: bbbb
+    aaaabbbbzzzz\O3
+ 0: aaaabbbbzz
+ 1: bbbb
+ 2: z
+    aaaabbbbzzzz\O4
+ 0: aaaabbbbzz
+ 1: bbbb
+ 2: z
+ 3: z
+    aaaabbbbzzzz\O5
+ 0: aaaabbbbzz
+ 1: bbbb
+ 2: z
+ 3: z
+    
+/^.?abcd/S 
+Capturing subpattern count = 0
+Options: anchored
+No first char
+Need char = 'd'
+Study returned NULL
+
+/\(             # ( at start
+  (?:           # Non-capturing bracket
+  (?>[^()]+)    # Either a sequence of non-brackets (no backtracking)
+  |             # Or
+  (?R)          # Recurse - i.e. nested bracketed string
+  )*            # Zero or more contents
+  \)            # Closing )
+  /x
+Capturing subpattern count = 0
+Options: extended
+First char = '('
+Need char = ')'
+    (abcd)
+ 0: (abcd)
+    (abcd)xyz
+ 0: (abcd)
+    xyz(abcd)
+ 0: (abcd)
+    (ab(xy)cd)pqr 
+ 0: (ab(xy)cd)
+    (ab(xycd)pqr 
+ 0: (xycd)
+    () abc () 
+ 0: ()
+    12(abcde(fsh)xyz(foo(bar))lmno)89
+ 0: (abcde(fsh)xyz(foo(bar))lmno)
+    *** Failers
+No match
+    abcd 
+No match
+    abcd)
+No match
+    (abcd  
+No match
+
+/\(  ( (?>[^()]+) | (?R) )* \) /xg
+Capturing subpattern count = 1
+Options: extended
+First char = '('
+Need char = ')'
+    (ab(xy)cd)pqr 
+ 0: (ab(xy)cd)
+ 1: cd
+    1(abcd)(x(y)z)pqr
+ 0: (abcd)
+ 1: abcd
+ 0: (x(y)z)
+ 1: z
+
+/\(  (?: (?>[^()]+) | (?R) ) \) /x
+Capturing subpattern count = 0
+Options: extended
+First char = '('
+Need char = ')'
+    (abcd)
+ 0: (abcd)
+    (ab(xy)cd)
+ 0: (xy)
+    (a(b(c)d)e) 
+ 0: (c)
+    ((ab)) 
+ 0: ((ab))
+    *** Failers
+No match
+    ()   
+No match
+
+/\(  (?: (?>[^()]+) | (?R) )? \) /x
+Capturing subpattern count = 0
+Options: extended
+First char = '('
+Need char = ')'
+    ()
+ 0: ()
+    12(abcde(fsh)xyz(foo(bar))lmno)89
+ 0: (fsh)
+
+/\(  ( (?>[^()]+) | (?R) )* \) /x
+Capturing subpattern count = 1
+Options: extended
+First char = '('
+Need char = ')'
+    (ab(xy)cd)
+ 0: (ab(xy)cd)
+ 1: cd
+
+/\( ( ( (?>[^()]+) | (?R) )* ) \) /x
+Capturing subpattern count = 2
+Options: extended
+First char = '('
+Need char = ')'
+    (ab(xy)cd)
+ 0: (ab(xy)cd)
+ 1: ab(xy)cd
+ 2: cd
+
+/\( (123)? ( ( (?>[^()]+) | (?R) )* ) \) /x
+Capturing subpattern count = 3
+Options: extended
+First char = '('
+Need char = ')'
+    (ab(xy)cd)
+ 0: (ab(xy)cd)
+ 1: <unset>
+ 2: ab(xy)cd
+ 3: cd
+    (123ab(xy)cd)
+ 0: (123ab(xy)cd)
+ 1: 123
+ 2: ab(xy)cd
+ 3: cd
+
+/\( ( (123)? ( (?>[^()]+) | (?R) )* ) \) /x
+Capturing subpattern count = 3
+Options: extended
+First char = '('
+Need char = ')'
+    (ab(xy)cd)
+ 0: (ab(xy)cd)
+ 1: ab(xy)cd
+ 2: <unset>
+ 3: cd
+    (123ab(xy)cd)
+ 0: (123ab(xy)cd)
+ 1: 123ab(xy)cd
+ 2: 123
+ 3: cd
+
+/\( (((((((((( ( (?>[^()]+) | (?R) )* )))))))))) \) /x
+Capturing subpattern count = 11
+Options: extended
+First char = '('
+Need char = ')'
+    (ab(xy)cd)
+ 0: (ab(xy)cd)
+ 1: ab(xy)cd
+ 2: ab(xy)cd
+ 3: ab(xy)cd
+ 4: ab(xy)cd
+ 5: ab(xy)cd
+ 6: ab(xy)cd
+ 7: ab(xy)cd
+ 8: ab(xy)cd
+ 9: ab(xy)cd
+10: ab(xy)cd
+11: cd
+
+/\( ( ( (?>[^()<>]+) | ((?>[^()]+)) | (?R) )* ) \) /x
+Capturing subpattern count = 3
+Options: extended
+First char = '('
+Need char = ')'
+    (abcd(xyz<p>qrs)123)
+ 0: (abcd(xyz<p>qrs)123)
+ 1: abcd(xyz<p>qrs)123
+ 2: 123
+ 3: <p>qrs
+
+/\( ( ( (?>[^()]+) | ((?R)) )* ) \) /x
+Capturing subpattern count = 3
+Options: extended
+First char = '('
+Need char = ')'
+    (ab(cd)ef)
+ 0: (ab(cd)ef)
+ 1: ab(cd)ef
+ 2: ef
+ 3: (cd)
+    (ab(cd(ef)gh)ij)
+ 0: (ab(cd(ef)gh)ij)
+ 1: ab(cd(ef)gh)ij
+ 2: ij
+ 3: (cd(ef)gh)
+
+/^[[:alnum:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [0-9A-Za-z]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[[:alpha:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [A-Za-z]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+             
+/^[[:ascii:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [\x00-\x7f]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[[:cntrl:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [\x00-\x1f\x7f]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[[:digit:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [0-9]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[[:graph:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [!-~]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[[:lower:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [a-z]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[[:print:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [ -~]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[[:punct:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [!-/:-@[-`{-~]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[[:space:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [\x09-\x0d ]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[[:upper:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [A-Z]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[[:xdigit:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [0-9A-Fa-f]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[[:word:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [0-9A-Z_a-z]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[[:^cntrl:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [ -~\x80-\xff]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/^[12[:^digit:]]/D
+------------------------------------------------------------------
+  0  37 Bra 0
+  3     ^
+  4     [\x00-/1-2:-\xff]
+ 37  37 Ket
+ 40     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Options: anchored
+No first char
+No need char
+
+/[01[:alpha:]%]/D
+------------------------------------------------------------------
+  0  36 Bra 0
+  3     [%0-1A-Za-z]
+ 36  36 Ket
+ 39     End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+
+/[[.ch.]]/
+Failed: POSIX collating elements are not supported at offset 1
+
+/[[=ch=]]/
+Failed: POSIX collating elements are not supported at offset 1
+
+/[[:rhubarb:]]/
+Failed: unknown POSIX class name at offset 3
+
+/[[:upper:]]/i
+Capturing subpattern count = 0
+Options: caseless
+No first char
+No need char
+    A
+ 0: A
+    a 
+ 0: a
+    
+/[[:lower:]]/i
+Capturing subpattern count = 0
+Options: caseless
+No first char
+No need char
+    A
+ 0: A
+    a 
+ 0: a
+
+/((?-i)[[:lower:]])[[:lower:]]/i
+Capturing subpattern count = 1
+Options: caseless
+Case state changes
+No first char
+No need char
+    ab
+ 0: ab
+ 1: a
+    aB
+ 0: aB
+ 1: a
+    *** Failers
+ 0: ai
+ 1: a
+    Ab
+No match
+    AB        
+No match
+
+/ End of test input /
+Capturing subpattern count = 0
+No options
+First char = ' '
+Need char = ' '
+
diff --git a/srclib/pcre/testdata/testoutput3 b/srclib/pcre/testdata/testoutput3
new file mode 100644
index 0000000000..8eb215eb59
--- /dev/null
+++ b/srclib/pcre/testdata/testoutput3
@@ -0,0 +1,2929 @@
+PCRE version 3.1 09-Feb-2000
+
+/(?<!bar)foo/
+    foo
+ 0: foo
+    catfood
+ 0: foo
+    arfootle
+ 0: foo
+    rfoosh
+ 0: foo
+    *** Failers
+No match
+    barfoo
+No match
+    towbarfoo
+No match
+
+/\w{3}(?<!bar)foo/
+    catfood
+ 0: catfoo
+    *** Failers
+No match
+    foo
+No match
+    barfoo
+No match
+    towbarfoo
+No match
+
+/(?<=(foo)a)bar/
+    fooabar
+ 0: bar
+ 1: foo
+    *** Failers
+No match
+    bar
+No match
+    foobbar
+No match
+      
+/\Aabc\z/m
+    abc
+ 0: abc
+    *** Failers
+No match
+    abc\n   
+No match
+    qqq\nabc
+No match
+    abc\nzzz
+No match
+    qqq\nabc\nzzz
+No match
+
+"(?>.*/)foo"
+    /this/is/a/very/long/line/in/deed/with/very/many/slashes/in/it/you/see/
+No match
+
+"(?>.*/)foo"
+    /this/is/a/very/long/line/in/deed/with/very/many/slashes/in/and/foo
+ 0: /this/is/a/very/long/line/in/deed/with/very/many/slashes/in/and/foo
+
+/(?>(\.\d\d[1-9]?))\d+/
+    1.230003938
+ 0: .230003938
+ 1: .23
+    1.875000282
+ 0: .875000282
+ 1: .875
+    *** Failers 
+No match
+    1.235 
+No match
+
+/^((?>\w+)|(?>\s+))*$/
+    now is the time for all good men to come to the aid of the party
+ 0: now is the time for all good men to come to the aid of the party
+ 1: party
+    *** Failers
+No match
+    this is not a line with only words and spaces!
+No match
+    
+/(\d+)(\w)/
+    12345a
+ 0: 12345a
+ 1: 12345
+ 2: a
+    12345+ 
+ 0: 12345
+ 1: 1234
+ 2: 5
+
+/((?>\d+))(\w)/
+    12345a
+ 0: 12345a
+ 1: 12345
+ 2: a
+    *** Failers
+No match
+    12345+ 
+No match
+
+/(?>a+)b/
+    aaab
+ 0: aaab
+
+/((?>a+)b)/
+    aaab
+ 0: aaab
+ 1: aaab
+
+/(?>(a+))b/
+    aaab
+ 0: aaab
+ 1: aaa
+
+/(?>b)+/
+    aaabbbccc
+ 0: bbb
+
+/(?>a+|b+|c+)*c/
+    aaabbbbccccd
+ 0: aaabbbbc
+
+/((?>[^()]+)|\([^()]*\))+/
+    ((abc(ade)ufh()()x
+ 0: abc(ade)ufh()()x
+ 1: x
+    
+/\(((?>[^()]+)|\([^()]+\))+\)/ 
+    (abc)
+ 0: (abc)
+ 1: abc
+    (abc(def)xyz)
+ 0: (abc(def)xyz)
+ 1: xyz
+    *** Failers
+No match
+    ((()aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa   
+No match
+
+/a(?-i)b/i
+    ab
+ 0: ab
+    *** Failers 
+No match
+    Ab
+No match
+    aB
+No match
+    AB
+No match
+        
+/(a (?x)b c)d e/
+    a bcd e
+ 0: a bcd e
+ 1: a bc
+    *** Failers
+No match
+    a b cd e
+No match
+    abcd e   
+No match
+    a bcde 
+No match
+ 
+/(a b(?x)c d (?-x)e f)/
+    a bcde f
+ 0: a bcde f
+ 1: a bcde f
+    *** Failers
+No match
+    abcdef  
+No match
+
+/(a(?i)b)c/
+    abc
+ 0: abc
+ 1: ab
+    aBc
+ 0: aBc
+ 1: aB
+    *** Failers
+No match
+    abC
+No match
+    aBC  
+No match
+    Abc
+No match
+    ABc
+No match
+    ABC
+No match
+    AbC
+No match
+    
+/a(?i:b)c/
+    abc
+ 0: abc
+    aBc
+ 0: aBc
+    *** Failers 
+No match
+    ABC
+No match
+    abC
+No match
+    aBC
+No match
+    
+/a(?i:b)*c/
+    aBc
+ 0: aBc
+    aBBc
+ 0: aBBc
+    *** Failers 
+No match
+    aBC
+No match
+    aBBC
+No match
+    
+/a(?=b(?i)c)\w\wd/
+    abcd
+ 0: abcd
+    abCd
+ 0: abCd
+    *** Failers
+No match
+    aBCd
+No match
+    abcD     
+No match
+    
+/(?s-i:more.*than).*million/i
+    more than million
+ 0: more than million
+    more than MILLION
+ 0: more than MILLION
+    more \n than Million 
+ 0: more \x0a than Million
+    *** Failers
+No match
+    MORE THAN MILLION    
+No match
+    more \n than \n million 
+No match
+
+/(?:(?s-i)more.*than).*million/i
+    more than million
+ 0: more than million
+    more than MILLION
+ 0: more than MILLION
+    more \n than Million 
+ 0: more \x0a than Million
+    *** Failers
+No match
+    MORE THAN MILLION    
+No match
+    more \n than \n million 
+No match
+    
+/(?>a(?i)b+)+c/ 
+    abc
+ 0: abc
+    aBbc
+ 0: aBbc
+    aBBc 
+ 0: aBBc
+    *** Failers
+No match
+    Abc
+No match
+    abAb    
+No match
+    abbC 
+No match
+    
+/(?=a(?i)b)\w\wc/
+    abc
+ 0: abc
+    aBc
+ 0: aBc
+    *** Failers
+No match
+    Ab 
+No match
+    abC
+No match
+    aBC     
+No match
+    
+/(?<=a(?i)b)(\w\w)c/
+    abxxc
+ 0: xxc
+ 1: xx
+    aBxxc
+ 0: xxc
+ 1: xx
+    *** Failers
+No match
+    Abxxc
+No match
+    ABxxc
+No match
+    abxxC      
+No match
+
+/(?:(a)|b)(?(1)A|B)/
+    aA
+ 0: aA
+ 1: a
+    bB
+ 0: bB
+    *** Failers
+No match
+    aB
+No match
+    bA    
+No match
+
+/^(a)?(?(1)a|b)+$/
+    aa
+ 0: aa
+ 1: a
+    b
+ 0: b
+    bb  
+ 0: bb
+    *** Failers
+No match
+    ab   
+No match
+
+/^(?(?=abc)\w{3}:|\d\d)$/
+    abc:
+ 0: abc:
+    12
+ 0: 12
+    *** Failers
+No match
+    123
+No match
+    xyz    
+No match
+
+/^(?(?!abc)\d\d|\w{3}:)$/
+    abc:
+ 0: abc:
+    12
+ 0: 12
+    *** Failers
+No match
+    123
+No match
+    xyz    
+No match
+    
+/(?(?<=foo)bar|cat)/
+    foobar
+ 0: bar
+    cat
+ 0: cat
+    fcat
+ 0: cat
+    focat   
+ 0: cat
+    *** Failers
+No match
+    foocat  
+No match
+
+/(?(?<!foo)cat|bar)/
+    foobar
+ 0: bar
+    cat
+ 0: cat
+    fcat
+ 0: cat
+    focat   
+ 0: cat
+    *** Failers
+No match
+    foocat  
+No match
+
+/( \( )? [^()]+ (?(1) \) |) /x
+    abcd
+ 0: abcd
+    (abcd)
+ 0: (abcd)
+ 1: (
+    the quick (abcd) fox
+ 0: the quick 
+    (abcd   
+ 0: abcd
+
+/( \( )? [^()]+ (?(1) \) ) /x
+    abcd
+ 0: abcd
+    (abcd)
+ 0: (abcd)
+ 1: (
+    the quick (abcd) fox
+ 0: the quick 
+    (abcd   
+ 0: abcd
+
+/^(?(2)a|(1)(2))+$/
+    12
+ 0: 12
+ 1: 1
+ 2: 2
+    12a
+ 0: 12a
+ 1: 1
+ 2: 2
+    12aa
+ 0: 12aa
+ 1: 1
+ 2: 2
+    *** Failers
+No match
+    1234    
+No match
+
+/((?i)blah)\s+\1/
+    blah blah
+ 0: blah blah
+ 1: blah
+    BLAH BLAH
+ 0: BLAH BLAH
+ 1: BLAH
+    Blah Blah
+ 0: Blah Blah
+ 1: Blah
+    blaH blaH
+ 0: blaH blaH
+ 1: blaH
+    *** Failers
+No match
+    blah BLAH
+No match
+    Blah blah      
+No match
+    blaH blah 
+No match
+
+/((?i)blah)\s+(?i:\1)/
+    blah blah
+ 0: blah blah
+ 1: blah
+    BLAH BLAH
+ 0: BLAH BLAH
+ 1: BLAH
+    Blah Blah
+ 0: Blah Blah
+ 1: Blah
+    blaH blaH
+ 0: blaH blaH
+ 1: blaH
+    blah BLAH
+ 0: blah BLAH
+ 1: blah
+    Blah blah      
+ 0: Blah blah
+ 1: Blah
+    blaH blah 
+ 0: blaH blah
+ 1: blaH
+
+/(?>a*)*/
+    a
+ 0: a
+    aa
+ 0: aa
+    aaaa
+ 0: aaaa
+    
+/(abc|)+/
+    abc
+ 0: abc
+ 1: 
+    abcabc
+ 0: abcabc
+ 1: 
+    abcabcabc
+ 0: abcabcabc
+ 1: 
+    xyz      
+ 0: 
+ 1: 
+
+/([a]*)*/
+    a
+ 0: a
+ 1: 
+    aaaaa 
+ 0: aaaaa
+ 1: 
+ 
+/([ab]*)*/
+    a
+ 0: a
+ 1: 
+    b
+ 0: b
+ 1: 
+    ababab
+ 0: ababab
+ 1: 
+    aaaabcde
+ 0: aaaab
+ 1: 
+    bbbb    
+ 0: bbbb
+ 1: 
+ 
+/([^a]*)*/
+    b
+ 0: b
+ 1: 
+    bbbb
+ 0: bbbb
+ 1: 
+    aaa   
+ 0: 
+ 1: 
+ 
+/([^ab]*)*/
+    cccc
+ 0: cccc
+ 1: 
+    abab  
+ 0: 
+ 1: 
+ 
+/([a]*?)*/
+    a
+ 0: 
+ 1: 
+    aaaa 
+ 0: 
+ 1: 
+ 
+/([ab]*?)*/
+    a
+ 0: 
+ 1: 
+    b
+ 0: 
+ 1: 
+    abab
+ 0: 
+ 1: 
+    baba   
+ 0: 
+ 1: 
+ 
+/([^a]*?)*/
+    b
+ 0: 
+ 1: 
+    bbbb
+ 0: 
+ 1: 
+    aaa   
+ 0: 
+ 1: 
+ 
+/([^ab]*?)*/
+    c
+ 0: 
+ 1: 
+    cccc
+ 0: 
+ 1: 
+    baba   
+ 0: 
+ 1: 
+ 
+/(?>a*)*/
+    a
+ 0: a
+    aaabcde 
+ 0: aaa
+ 
+/((?>a*))*/
+    aaaaa
+ 0: aaaaa
+ 1: 
+    aabbaa 
+ 0: aa
+ 1: 
+ 
+/((?>a*?))*/
+    aaaaa
+ 0: 
+ 1: 
+    aabbaa 
+ 0: 
+ 1: 
+
+/(?(?=[^a-z]+[a-z])  \d{2}-[a-z]{3}-\d{2}  |  \d{2}-\d{2}-\d{2} ) /x
+    12-sep-98
+ 0: 12-sep-98
+    12-09-98
+ 0: 12-09-98
+    *** Failers
+No match
+    sep-12-98
+No match
+        
+/(?<=(foo))bar\1/
+    foobarfoo
+ 0: barfoo
+ 1: foo
+    foobarfootling 
+ 0: barfoo
+ 1: foo
+    *** Failers
+No match
+    foobar
+No match
+    barfoo   
+No match
+
+/(?i:saturday|sunday)/
+    saturday
+ 0: saturday
+    sunday
+ 0: sunday
+    Saturday
+ 0: Saturday
+    Sunday
+ 0: Sunday
+    SATURDAY
+ 0: SATURDAY
+    SUNDAY
+ 0: SUNDAY
+    SunDay
+ 0: SunDay
+    
+/(a(?i)bc|BB)x/
+    abcx
+ 0: abcx
+ 1: abc
+    aBCx
+ 0: aBCx
+ 1: aBC
+    bbx
+ 0: bbx
+ 1: bb
+    BBx
+ 0: BBx
+ 1: BB
+    *** Failers
+No match
+    abcX
+No match
+    aBCX
+No match
+    bbX
+No match
+    BBX               
+No match
+
+/^([ab](?i)[cd]|[ef])/
+    ac
+ 0: ac
+ 1: ac
+    aC
+ 0: aC
+ 1: aC
+    bD
+ 0: bD
+ 1: bD
+    elephant
+ 0: e
+ 1: e
+    Europe 
+ 0: E
+ 1: E
+    frog
+ 0: f
+ 1: f
+    France
+ 0: F
+ 1: F
+    *** Failers
+No match
+    Africa     
+No match
+
+/^(ab|a(?i)[b-c](?m-i)d|x(?i)y|z)/
+    ab
+ 0: ab
+ 1: ab
+    aBd
+ 0: aBd
+ 1: aBd
+    xy
+ 0: xy
+ 1: xy
+    xY
+ 0: xY
+ 1: xY
+    zebra
+ 0: z
+ 1: z
+    Zambesi
+ 0: Z
+ 1: Z
+    *** Failers
+No match
+    aCD  
+No match
+    XY  
+No match
+
+/(?<=foo\n)^bar/m
+    foo\nbar
+ 0: bar
+    *** Failers
+No match
+    bar
+No match
+    baz\nbar   
+No match
+
+/(?<=(?<!foo)bar)baz/
+    barbaz
+ 0: baz
+    barbarbaz 
+ 0: baz
+    koobarbaz 
+ 0: baz
+    *** Failers
+No match
+    baz
+No match
+    foobarbaz 
+No match
+
+/The case of aaaaaa is missed out below because I think Perl 5.005_02 gets/
+/it wrong; it sets $1 to aaa rather than aa. Compare the following test,/
+No match
+/where it does set $1 to aa when matching aaaaaa./
+No match
+
+/^(a\1?){4}$/
+    a
+No match
+    aa
+No match
+    aaa
+No match
+    aaaa
+ 0: aaaa
+ 1: a
+    aaaaa
+ 0: aaaaa
+ 1: a
+    aaaaaaa
+ 0: aaaaaaa
+ 1: a
+    aaaaaaaa
+No match
+    aaaaaaaaa
+No match
+    aaaaaaaaaa
+ 0: aaaaaaaaaa
+ 1: aaaa
+    aaaaaaaaaaa
+No match
+    aaaaaaaaaaaa
+No match
+    aaaaaaaaaaaaa
+No match
+    aaaaaaaaaaaaaa
+No match
+    aaaaaaaaaaaaaaa
+No match
+    aaaaaaaaaaaaaaaa               
+No match
+
+/^(a\1?)(a\1?)(a\2?)(a\3?)$/
+    a
+No match
+    aa
+No match
+    aaa
+No match
+    aaaa
+ 0: aaaa
+ 1: a
+ 2: a
+ 3: a
+ 4: a
+    aaaaa
+ 0: aaaaa
+ 1: a
+ 2: aa
+ 3: a
+ 4: a
+    aaaaaa
+ 0: aaaaaa
+ 1: a
+ 2: aa
+ 3: a
+ 4: aa
+    aaaaaaa
+ 0: aaaaaaa
+ 1: a
+ 2: aa
+ 3: aaa
+ 4: a
+    aaaaaaaa
+No match
+    aaaaaaaaa
+No match
+    aaaaaaaaaa
+ 0: aaaaaaaaaa
+ 1: a
+ 2: aa
+ 3: aaa
+ 4: aaaa
+    aaaaaaaaaaa
+No match
+    aaaaaaaaaaaa
+No match
+    aaaaaaaaaaaaa
+No match
+    aaaaaaaaaaaaaa
+No match
+    aaaaaaaaaaaaaaa
+No match
+    aaaaaaaaaaaaaaaa               
+No match
+
+/The following tests are taken from the Perl 5.005 test suite; some of them/
+/are compatible with 5.004, but I'd rather not have to sort them out./
+No match
+
+/abc/
+    abc
+ 0: abc
+    xabcy
+ 0: abc
+    ababc
+ 0: abc
+    *** Failers
+No match
+    xbc
+No match
+    axc
+No match
+    abx
+No match
+
+/ab*c/
+    abc
+ 0: abc
+
+/ab*bc/
+    abc
+ 0: abc
+    abbc
+ 0: abbc
+    abbbbc
+ 0: abbbbc
+
+/.{1}/
+    abbbbc
+ 0: a
+
+/.{3,4}/
+    abbbbc
+ 0: abbb
+
+/ab{0,}bc/
+    abbbbc
+ 0: abbbbc
+
+/ab+bc/
+    abbc
+ 0: abbc
+    *** Failers
+No match
+    abc
+No match
+    abq
+No match
+
+/ab{1,}bc/
+
+/ab+bc/
+    abbbbc
+ 0: abbbbc
+
+/ab{1,}bc/
+    abbbbc
+ 0: abbbbc
+
+/ab{1,3}bc/
+    abbbbc
+ 0: abbbbc
+
+/ab{3,4}bc/
+    abbbbc
+ 0: abbbbc
+
+/ab{4,5}bc/
+    *** Failers
+No match
+    abq
+No match
+    abbbbc
+No match
+
+/ab?bc/
+    abbc
+ 0: abbc
+    abc
+ 0: abc
+
+/ab{0,1}bc/
+    abc
+ 0: abc
+
+/ab?bc/
+
+/ab?c/
+    abc
+ 0: abc
+
+/ab{0,1}c/
+    abc
+ 0: abc
+
+/^abc$/
+    abc
+ 0: abc
+    *** Failers
+No match
+    abbbbc
+No match
+    abcc
+No match
+
+/^abc/
+    abcc
+ 0: abc
+
+/^abc$/
+
+/abc$/
+    aabc
+ 0: abc
+    *** Failers
+No match
+    aabc
+ 0: abc
+    aabcd
+No match
+
+/^/
+    abc
+ 0: 
+
+/$/
+    abc
+ 0: 
+
+/a.c/
+    abc
+ 0: abc
+    axc
+ 0: axc
+
+/a.*c/
+    axyzc
+ 0: axyzc
+
+/a[bc]d/
+    abd
+ 0: abd
+    *** Failers
+No match
+    axyzd
+No match
+    abc
+No match
+
+/a[b-d]e/
+    ace
+ 0: ace
+
+/a[b-d]/
+    aac
+ 0: ac
+
+/a[-b]/
+    a-
+ 0: a-
+
+/a[b-]/
+    a-
+ 0: a-
+
+/a]/
+    a]
+ 0: a]
+
+/a[]]b/
+    a]b
+ 0: a]b
+
+/a[^bc]d/
+    aed
+ 0: aed
+    *** Failers
+No match
+    abd
+No match
+    abd
+No match
+
+/a[^-b]c/
+    adc
+ 0: adc
+
+/a[^]b]c/
+    adc
+ 0: adc
+    *** Failers
+No match
+    a-c
+ 0: a-c
+    a]c
+No match
+
+/\ba\b/
+    a-
+ 0: a
+    -a
+ 0: a
+    -a-
+ 0: a
+
+/\by\b/
+    *** Failers
+No match
+    xy
+No match
+    yz
+No match
+    xyz
+No match
+
+/\Ba\B/
+    *** Failers
+ 0: a
+    a-
+No match
+    -a
+No match
+    -a-
+No match
+
+/\By\b/
+    xy
+ 0: y
+
+/\by\B/
+    yz
+ 0: y
+
+/\By\B/
+    xyz
+ 0: y
+
+/\w/
+    a
+ 0: a
+
+/\W/
+    -
+ 0: -
+    *** Failers
+ 0: *
+    -
+ 0: -
+    a
+No match
+
+/a\sb/
+    a b
+ 0: a b
+
+/a\Sb/
+    a-b
+ 0: a-b
+    *** Failers
+No match
+    a-b
+ 0: a-b
+    a b
+No match
+
+/\d/
+    1
+ 0: 1
+
+/\D/
+    -
+ 0: -
+    *** Failers
+ 0: *
+    -
+ 0: -
+    1
+No match
+
+/[\w]/
+    a
+ 0: a
+
+/[\W]/
+    -
+ 0: -
+    *** Failers
+ 0: *
+    -
+ 0: -
+    a
+No match
+
+/a[\s]b/
+    a b
+ 0: a b
+
+/a[\S]b/
+    a-b
+ 0: a-b
+    *** Failers
+No match
+    a-b
+ 0: a-b
+    a b
+No match
+
+/[\d]/
+    1
+ 0: 1
+
+/[\D]/
+    -
+ 0: -
+    *** Failers
+ 0: *
+    -
+ 0: -
+    1
+No match
+
+/ab|cd/
+    abc
+ 0: ab
+    abcd
+ 0: ab
+
+/()ef/
+    def
+ 0: ef
+ 1: 
+
+/$b/
+
+/a\(b/
+    a(b
+ 0: a(b
+
+/a\(*b/
+    ab
+ 0: ab
+    a((b
+ 0: a((b
+
+/a\\b/
+    a\b
+No match
+
+/((a))/
+    abc
+ 0: a
+ 1: a
+ 2: a
+
+/(a)b(c)/
+    abc
+ 0: abc
+ 1: a
+ 2: c
+
+/a+b+c/
+    aabbabc
+ 0: abc
+
+/a{1,}b{1,}c/
+    aabbabc
+ 0: abc
+
+/a.+?c/
+    abcabc
+ 0: abc
+
+/(a+|b)*/
+    ab
+ 0: ab
+ 1: b
+
+/(a+|b){0,}/
+    ab
+ 0: ab
+ 1: b
+
+/(a+|b)+/
+    ab
+ 0: ab
+ 1: b
+
+/(a+|b){1,}/
+    ab
+ 0: ab
+ 1: b
+
+/(a+|b)?/
+    ab
+ 0: a
+ 1: a
+
+/(a+|b){0,1}/
+    ab
+ 0: a
+ 1: a
+
+/[^ab]*/
+    cde
+ 0: cde
+
+/abc/
+    *** Failers
+No match
+    b
+No match
+    
+
+/a*/
+    
+
+/([abc])*d/
+    abbbcd
+ 0: abbbcd
+ 1: c
+
+/([abc])*bcd/
+    abcd
+ 0: abcd
+ 1: a
+
+/a|b|c|d|e/
+    e
+ 0: e
+
+/(a|b|c|d|e)f/
+    ef
+ 0: ef
+ 1: e
+
+/abcd*efg/
+    abcdefg
+ 0: abcdefg
+
+/ab*/
+    xabyabbbz
+ 0: ab
+    xayabbbz
+ 0: a
+
+/(ab|cd)e/
+    abcde
+ 0: cde
+ 1: cd
+
+/[abhgefdc]ij/
+    hij
+ 0: hij
+
+/^(ab|cd)e/
+
+/(abc|)ef/
+    abcdef
+ 0: ef
+ 1: 
+
+/(a|b)c*d/
+    abcd
+ 0: bcd
+ 1: b
+
+/(ab|ab*)bc/
+    abc
+ 0: abc
+ 1: a
+
+/a([bc]*)c*/
+    abc
+ 0: abc
+ 1: bc
+
+/a([bc]*)(c*d)/
+    abcd
+ 0: abcd
+ 1: bc
+ 2: d
+
+/a([bc]+)(c*d)/
+    abcd
+ 0: abcd
+ 1: bc
+ 2: d
+
+/a([bc]*)(c+d)/
+    abcd
+ 0: abcd
+ 1: b
+ 2: cd
+
+/a[bcd]*dcdcde/
+    adcdcde
+ 0: adcdcde
+
+/a[bcd]+dcdcde/
+    *** Failers
+No match
+    abcde
+No match
+    adcdcde
+No match
+
+/(ab|a)b*c/
+    abc
+ 0: abc
+ 1: ab
+
+/((a)(b)c)(d)/
+    abcd
+ 0: abcd
+ 1: abc
+ 2: a
+ 3: b
+ 4: d
+
+/[a-zA-Z_][a-zA-Z0-9_]*/
+    alpha
+ 0: alpha
+
+/^a(bc+|b[eh])g|.h$/
+    abh
+ 0: bh
+
+/(bc+d$|ef*g.|h?i(j|k))/
+    effgz
+ 0: effgz
+ 1: effgz
+    ij
+ 0: ij
+ 1: ij
+ 2: j
+    reffgz
+ 0: effgz
+ 1: effgz
+    *** Failers
+No match
+    effg
+No match
+    bcdd
+No match
+
+/((((((((((a))))))))))/
+    a
+ 0: a
+ 1: a
+ 2: a
+ 3: a
+ 4: a
+ 5: a
+ 6: a
+ 7: a
+ 8: a
+ 9: a
+10: a
+
+/((((((((((a))))))))))\10/
+    aa
+ 0: aa
+ 1: a
+ 2: a
+ 3: a
+ 4: a
+ 5: a
+ 6: a
+ 7: a
+ 8: a
+ 9: a
+10: a
+
+/(((((((((a)))))))))/
+    a
+ 0: a
+ 1: a
+ 2: a
+ 3: a
+ 4: a
+ 5: a
+ 6: a
+ 7: a
+ 8: a
+ 9: a
+
+/multiple words of text/
+    *** Failers
+No match
+    aa
+No match
+    uh-uh
+No match
+
+/multiple words/
+    multiple words, yeah
+ 0: multiple words
+
+/(.*)c(.*)/
+    abcde
+ 0: abcde
+ 1: ab
+ 2: de
+
+/\((.*), (.*)\)/
+    (a, b)
+ 0: (a, b)
+ 1: a
+ 2: b
+
+/[k]/
+
+/abcd/
+    abcd
+ 0: abcd
+
+/a(bc)d/
+    abcd
+ 0: abcd
+ 1: bc
+
+/a[-]?c/
+    ac
+ 0: ac
+
+/(abc)\1/
+    abcabc
+ 0: abcabc
+ 1: abc
+
+/([a-c]*)\1/
+    abcabc
+ 0: abcabc
+ 1: abc
+
+/(a)|\1/
+    a
+ 0: a
+ 1: a
+    *** Failers
+ 0: a
+ 1: a
+    ab
+ 0: a
+ 1: a
+    x
+No match
+
+/(([a-c])b*?\2)*/
+    ababbbcbc
+ 0: ababb
+ 1: bb
+ 2: b
+
+/(([a-c])b*?\2){3}/
+    ababbbcbc
+ 0: ababbbcbc
+ 1: cbc
+ 2: c
+
+/((\3|b)\2(a)x)+/
+    aaaxabaxbaaxbbax
+ 0: bbax
+ 1: bbax
+ 2: b
+ 3: a
+
+/((\3|b)\2(a)){2,}/
+    bbaababbabaaaaabbaaaabba
+ 0: bbaaaabba
+ 1: bba
+ 2: b
+ 3: a
+
+/abc/i
+    ABC
+ 0: ABC
+    XABCY
+ 0: ABC
+    ABABC
+ 0: ABC
+    *** Failers
+No match
+    aaxabxbaxbbx
+No match
+    XBC
+No match
+    AXC
+No match
+    ABX
+No match
+
+/ab*c/i
+    ABC
+ 0: ABC
+
+/ab*bc/i
+    ABC
+ 0: ABC
+    ABBC
+ 0: ABBC
+
+/ab*?bc/i
+    ABBBBC
+ 0: ABBBBC
+
+/ab{0,}?bc/i
+    ABBBBC
+ 0: ABBBBC
+
+/ab+?bc/i
+    ABBC
+ 0: ABBC
+
+/ab+bc/i
+    *** Failers
+No match
+    ABC
+No match
+    ABQ
+No match
+
+/ab{1,}bc/i
+
+/ab+bc/i
+    ABBBBC
+ 0: ABBBBC
+
+/ab{1,}?bc/i
+    ABBBBC
+ 0: ABBBBC
+
+/ab{1,3}?bc/i
+    ABBBBC
+ 0: ABBBBC
+
+/ab{3,4}?bc/i
+    ABBBBC
+ 0: ABBBBC
+
+/ab{4,5}?bc/i
+    *** Failers
+No match
+    ABQ
+No match
+    ABBBBC
+No match
+
+/ab??bc/i
+    ABBC
+ 0: ABBC
+    ABC
+ 0: ABC
+
+/ab{0,1}?bc/i
+    ABC
+ 0: ABC
+
+/ab??bc/i
+
+/ab??c/i
+    ABC
+ 0: ABC
+
+/ab{0,1}?c/i
+    ABC
+ 0: ABC
+
+/^abc$/i
+    ABC
+ 0: ABC
+    *** Failers
+No match
+    ABBBBC
+No match
+    ABCC
+No match
+
+/^abc/i
+    ABCC
+ 0: ABC
+
+/^abc$/i
+
+/abc$/i
+    AABC
+ 0: ABC
+
+/^/i
+    ABC
+ 0: 
+
+/$/i
+    ABC
+ 0: 
+
+/a.c/i
+    ABC
+ 0: ABC
+    AXC
+ 0: AXC
+
+/a.*?c/i
+    AXYZC
+ 0: AXYZC
+
+/a.*c/i
+    *** Failers
+No match
+    AABC
+ 0: AABC
+    AXYZD
+No match
+
+/a[bc]d/i
+    ABD
+ 0: ABD
+
+/a[b-d]e/i
+    ACE
+ 0: ACE
+    *** Failers
+No match
+    ABC
+No match
+    ABD
+No match
+
+/a[b-d]/i
+    AAC
+ 0: AC
+
+/a[-b]/i
+    A-
+ 0: A-
+
+/a[b-]/i
+    A-
+ 0: A-
+
+/a]/i
+    A]
+ 0: A]
+
+/a[]]b/i
+    A]B
+ 0: A]B
+
+/a[^bc]d/i
+    AED
+ 0: AED
+
+/a[^-b]c/i
+    ADC
+ 0: ADC
+    *** Failers
+No match
+    ABD
+No match
+    A-C
+No match
+
+/a[^]b]c/i
+    ADC
+ 0: ADC
+
+/ab|cd/i
+    ABC
+ 0: AB
+    ABCD
+ 0: AB
+
+/()ef/i
+    DEF
+ 0: EF
+ 1: 
+
+/$b/i
+    *** Failers
+No match
+    A]C
+No match
+    B
+No match
+
+/a\(b/i
+    A(B
+ 0: A(B
+
+/a\(*b/i
+    AB
+ 0: AB
+    A((B
+ 0: A((B
+
+/a\\b/i
+    A\B
+No match
+
+/((a))/i
+    ABC
+ 0: A
+ 1: A
+ 2: A
+
+/(a)b(c)/i
+    ABC
+ 0: ABC
+ 1: A
+ 2: C
+
+/a+b+c/i
+    AABBABC
+ 0: ABC
+
+/a{1,}b{1,}c/i
+    AABBABC
+ 0: ABC
+
+/a.+?c/i
+    ABCABC
+ 0: ABC
+
+/a.*?c/i
+    ABCABC
+ 0: ABC
+
+/a.{0,5}?c/i
+    ABCABC
+ 0: ABC
+
+/(a+|b)*/i
+    AB
+ 0: AB
+ 1: B
+
+/(a+|b){0,}/i
+    AB
+ 0: AB
+ 1: B
+
+/(a+|b)+/i
+    AB
+ 0: AB
+ 1: B
+
+/(a+|b){1,}/i
+    AB
+ 0: AB
+ 1: B
+
+/(a+|b)?/i
+    AB
+ 0: A
+ 1: A
+
+/(a+|b){0,1}/i
+    AB
+ 0: A
+ 1: A
+
+/(a+|b){0,1}?/i
+    AB
+ 0: 
+
+/[^ab]*/i
+    CDE
+ 0: CDE
+
+/abc/i
+
+/a*/i
+    
+
+/([abc])*d/i
+    ABBBCD
+ 0: ABBBCD
+ 1: C
+
+/([abc])*bcd/i
+    ABCD
+ 0: ABCD
+ 1: A
+
+/a|b|c|d|e/i
+    E
+ 0: E
+
+/(a|b|c|d|e)f/i
+    EF
+ 0: EF
+ 1: E
+
+/abcd*efg/i
+    ABCDEFG
+ 0: ABCDEFG
+
+/ab*/i
+    XABYABBBZ
+ 0: AB
+    XAYABBBZ
+ 0: A
+
+/(ab|cd)e/i
+    ABCDE
+ 0: CDE
+ 1: CD
+
+/[abhgefdc]ij/i
+    HIJ
+ 0: HIJ
+
+/^(ab|cd)e/i
+    ABCDE
+No match
+
+/(abc|)ef/i
+    ABCDEF
+ 0: EF
+ 1: 
+
+/(a|b)c*d/i
+    ABCD
+ 0: BCD
+ 1: B
+
+/(ab|ab*)bc/i
+    ABC
+ 0: ABC
+ 1: A
+
+/a([bc]*)c*/i
+    ABC
+ 0: ABC
+ 1: BC
+
+/a([bc]*)(c*d)/i
+    ABCD
+ 0: ABCD
+ 1: BC
+ 2: D
+
+/a([bc]+)(c*d)/i
+    ABCD
+ 0: ABCD
+ 1: BC
+ 2: D
+
+/a([bc]*)(c+d)/i
+    ABCD
+ 0: ABCD
+ 1: B
+ 2: CD
+
+/a[bcd]*dcdcde/i
+    ADCDCDE
+ 0: ADCDCDE
+
+/a[bcd]+dcdcde/i
+
+/(ab|a)b*c/i
+    ABC
+ 0: ABC
+ 1: AB
+
+/((a)(b)c)(d)/i
+    ABCD
+ 0: ABCD
+ 1: ABC
+ 2: A
+ 3: B
+ 4: D
+
+/[a-zA-Z_][a-zA-Z0-9_]*/i
+    ALPHA
+ 0: ALPHA
+
+/^a(bc+|b[eh])g|.h$/i
+    ABH
+ 0: BH
+
+/(bc+d$|ef*g.|h?i(j|k))/i
+    EFFGZ
+ 0: EFFGZ
+ 1: EFFGZ
+    IJ
+ 0: IJ
+ 1: IJ
+ 2: J
+    REFFGZ
+ 0: EFFGZ
+ 1: EFFGZ
+    *** Failers
+No match
+    ADCDCDE
+No match
+    EFFG
+No match
+    BCDD
+No match
+
+/((((((((((a))))))))))/i
+    A
+ 0: A
+ 1: A
+ 2: A
+ 3: A
+ 4: A
+ 5: A
+ 6: A
+ 7: A
+ 8: A
+ 9: A
+10: A
+
+/((((((((((a))))))))))\10/i
+    AA
+ 0: AA
+ 1: A
+ 2: A
+ 3: A
+ 4: A
+ 5: A
+ 6: A
+ 7: A
+ 8: A
+ 9: A
+10: A
+
+/(((((((((a)))))))))/i
+    A
+ 0: A
+ 1: A
+ 2: A
+ 3: A
+ 4: A
+ 5: A
+ 6: A
+ 7: A
+ 8: A
+ 9: A
+
+/(?:(?:(?:(?:(?:(?:(?:(?:(?:(a))))))))))/i
+    A
+ 0: A
+ 1: A
+
+/(?:(?:(?:(?:(?:(?:(?:(?:(?:(a|b|c))))))))))/i
+    C
+ 0: C
+ 1: C
+
+/multiple words of text/i
+    *** Failers
+No match
+    AA
+No match
+    UH-UH
+No match
+
+/multiple words/i
+    MULTIPLE WORDS, YEAH
+ 0: MULTIPLE WORDS
+
+/(.*)c(.*)/i
+    ABCDE
+ 0: ABCDE
+ 1: AB
+ 2: DE
+
+/\((.*), (.*)\)/i
+    (A, B)
+ 0: (A, B)
+ 1: A
+ 2: B
+
+/[k]/i
+
+/abcd/i
+    ABCD
+ 0: ABCD
+
+/a(bc)d/i
+    ABCD
+ 0: ABCD
+ 1: BC
+
+/a[-]?c/i
+    AC
+ 0: AC
+
+/(abc)\1/i
+    ABCABC
+ 0: ABCABC
+ 1: ABC
+
+/([a-c]*)\1/i
+    ABCABC
+ 0: ABCABC
+ 1: ABC
+
+/a(?!b)./
+    abad
+ 0: ad
+
+/a(?=d)./
+    abad
+ 0: ad
+
+/a(?=c|d)./
+    abad
+ 0: ad
+
+/a(?:b|c|d)(.)/
+    ace
+ 0: ace
+ 1: e
+
+/a(?:b|c|d)*(.)/
+    ace
+ 0: ace
+ 1: e
+
+/a(?:b|c|d)+?(.)/
+    ace
+ 0: ace
+ 1: e
+    acdbcdbe
+ 0: acd
+ 1: d
+
+/a(?:b|c|d)+(.)/
+    acdbcdbe
+ 0: acdbcdbe
+ 1: e
+
+/a(?:b|c|d){2}(.)/
+    acdbcdbe
+ 0: acdb
+ 1: b
+
+/a(?:b|c|d){4,5}(.)/
+    acdbcdbe
+ 0: acdbcdb
+ 1: b
+
+/a(?:b|c|d){4,5}?(.)/
+    acdbcdbe
+ 0: acdbcd
+ 1: d
+
+/((foo)|(bar))*/
+    foobar
+ 0: foobar
+ 1: bar
+ 2: foo
+ 3: bar
+
+/a(?:b|c|d){6,7}(.)/
+    acdbcdbe
+ 0: acdbcdbe
+ 1: e
+
+/a(?:b|c|d){6,7}?(.)/
+    acdbcdbe
+ 0: acdbcdbe
+ 1: e
+
+/a(?:b|c|d){5,6}(.)/
+    acdbcdbe
+ 0: acdbcdbe
+ 1: e
+
+/a(?:b|c|d){5,6}?(.)/
+    acdbcdbe
+ 0: acdbcdb
+ 1: b
+
+/a(?:b|c|d){5,7}(.)/
+    acdbcdbe
+ 0: acdbcdbe
+ 1: e
+
+/a(?:b|c|d){5,7}?(.)/
+    acdbcdbe
+ 0: acdbcdb
+ 1: b
+
+/a(?:b|(c|e){1,2}?|d)+?(.)/
+    ace
+ 0: ace
+ 1: c
+ 2: e
+
+/^(.+)?B/
+    AB
+ 0: AB
+ 1: A
+
+/^([^a-z])|(\^)$/
+    .
+ 0: .
+ 1: .
+
+/^[<>]&/
+    <&OUT
+ 0: <&
+
+/^(a\1?){4}$/
+    aaaaaaaaaa
+ 0: aaaaaaaaaa
+ 1: aaaa
+    *** Failers
+No match
+    AB
+No match
+    aaaaaaaaa
+No match
+    aaaaaaaaaaa
+No match
+
+/^(a(?(1)\1)){4}$/
+    aaaaaaaaaa
+ 0: aaaaaaaaaa
+ 1: aaaa
+    *** Failers
+No match
+    aaaaaaaaa
+No match
+    aaaaaaaaaaa
+No match
+
+/(?:(f)(o)(o)|(b)(a)(r))*/
+    foobar
+ 0: foobar
+ 1: f
+ 2: o
+ 3: o
+ 4: b
+ 5: a
+ 6: r
+
+/(?<=a)b/
+    ab
+ 0: b
+    *** Failers
+No match
+    cb
+No match
+    b
+No match
+
+/(?<!c)b/
+    ab
+ 0: b
+    b
+ 0: b
+    b
+ 0: b
+
+/(?:..)*a/
+    aba
+ 0: aba
+
+/(?:..)*?a/
+    aba
+ 0: a
+
+/^(?:b|a(?=(.)))*\1/
+    abc
+ 0: ab
+ 1: b
+
+/^(){3,5}/
+    abc
+ 0: 
+ 1: 
+
+/^(a+)*ax/
+    aax
+ 0: aax
+ 1: a
+
+/^((a|b)+)*ax/
+    aax
+ 0: aax
+ 1: a
+ 2: a
+
+/^((a|bc)+)*ax/
+    aax
+ 0: aax
+ 1: a
+ 2: a
+
+/(a|x)*ab/
+    cab
+ 0: ab
+
+/(a)*ab/
+    cab
+ 0: ab
+
+/(?:(?i)a)b/
+    ab
+ 0: ab
+
+/((?i)a)b/
+    ab
+ 0: ab
+ 1: a
+
+/(?:(?i)a)b/
+    Ab
+ 0: Ab
+
+/((?i)a)b/
+    Ab
+ 0: Ab
+ 1: A
+
+/(?:(?i)a)b/
+    *** Failers
+No match
+    cb
+No match
+    aB
+No match
+
+/((?i)a)b/
+
+/(?i:a)b/
+    ab
+ 0: ab
+
+/((?i:a))b/
+    ab
+ 0: ab
+ 1: a
+
+/(?i:a)b/
+    Ab
+ 0: Ab
+
+/((?i:a))b/
+    Ab
+ 0: Ab
+ 1: A
+
+/(?i:a)b/
+    *** Failers
+No match
+    aB
+No match
+    aB
+No match
+
+/((?i:a))b/
+
+/(?:(?-i)a)b/i
+    ab
+ 0: ab
+
+/((?-i)a)b/i
+    ab
+ 0: ab
+ 1: a
+
+/(?:(?-i)a)b/i
+    aB
+ 0: aB
+
+/((?-i)a)b/i
+    aB
+ 0: aB
+ 1: a
+
+/(?:(?-i)a)b/i
+    *** Failers
+No match
+    aB
+ 0: aB
+    Ab
+No match
+
+/((?-i)a)b/i
+
+/(?:(?-i)a)b/i
+    aB
+ 0: aB
+
+/((?-i)a)b/i
+    aB
+ 0: aB
+ 1: a
+
+/(?:(?-i)a)b/i
+    *** Failers
+No match
+    Ab
+No match
+    AB
+No match
+
+/((?-i)a)b/i
+
+/(?-i:a)b/i
+    ab
+ 0: ab
+
+/((?-i:a))b/i
+    ab
+ 0: ab
+ 1: a
+
+/(?-i:a)b/i
+    aB
+ 0: aB
+
+/((?-i:a))b/i
+    aB
+ 0: aB
+ 1: a
+
+/(?-i:a)b/i
+    *** Failers
+No match
+    AB
+No match
+    Ab
+No match
+
+/((?-i:a))b/i
+
+/(?-i:a)b/i
+    aB
+ 0: aB
+
+/((?-i:a))b/i
+    aB
+ 0: aB
+ 1: a
+
+/(?-i:a)b/i
+    *** Failers
+No match
+    Ab
+No match
+    AB
+No match
+
+/((?-i:a))b/i
+
+/((?-i:a.))b/i
+    *** Failers
+No match
+    AB
+No match
+    a\nB
+No match
+
+/((?s-i:a.))b/i
+    a\nB
+ 0: a\x0aB
+ 1: a\x0a
+
+/(?:c|d)(?:)(?:a(?:)(?:b)(?:b(?:))(?:b(?:)(?:b)))/
+    cabbbb
+ 0: cabbbb
+
+/(?:c|d)(?:)(?:aaaaaaaa(?:)(?:bbbbbbbb)(?:bbbbbbbb(?:))(?:bbbbbbbb(?:)(?:bbbbbbbb)))/
+    caaaaaaaabbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
+ 0: caaaaaaaabbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
+
+/(ab)\d\1/i
+    Ab4ab
+ 0: Ab4ab
+ 1: Ab
+    ab4Ab
+ 0: ab4Ab
+ 1: ab
+
+/foo\w*\d{4}baz/
+    foobar1234baz
+ 0: foobar1234baz
+
+/x(~~)*(?:(?:F)?)?/
+    x~~
+ 0: x~~
+ 1: ~~
+
+/^a(?#xxx){3}c/
+    aaac
+ 0: aaac
+
+/^a (?#xxx) (?#yyy) {3}c/x
+    aaac
+ 0: aaac
+
+/(?<![cd])b/
+    *** Failers
+No match
+    B\nB
+No match
+    dbcb
+No match
+
+/(?<![cd])[ab]/
+    dbaacb
+ 0: a
+
+/(?<!(c|d))b/
+
+/(?<!(c|d))[ab]/
+    dbaacb
+ 0: a
+
+/(?<!cd)[ab]/
+    cdaccb
+ 0: b
+
+/^(?:a?b?)*$/
+    *** Failers
+No match
+    dbcb
+No match
+    a--
+No match
+
+/((?s)^a(.))((?m)^b$)/
+    a\nb\nc\n
+ 0: a\x0ab
+ 1: a\x0a
+ 2: \x0a
+ 3: b
+
+/((?m)^b$)/
+    a\nb\nc\n
+ 0: b
+ 1: b
+
+/(?m)^b/
+    a\nb\n
+ 0: b
+
+/(?m)^(b)/
+    a\nb\n
+ 0: b
+ 1: b
+
+/((?m)^b)/
+    a\nb\n
+ 0: b
+ 1: b
+
+/\n((?m)^b)/
+    a\nb\n
+ 0: \x0ab
+ 1: b
+
+/((?s).)c(?!.)/
+    a\nb\nc\n
+ 0: \x0ac
+ 1: \x0a
+    a\nb\nc\n
+ 0: \x0ac
+ 1: \x0a
+
+/((?s)b.)c(?!.)/
+    a\nb\nc\n
+ 0: b\x0ac
+ 1: b\x0a
+    a\nb\nc\n
+ 0: b\x0ac
+ 1: b\x0a
+
+/^b/
+
+/()^b/
+    *** Failers
+No match
+    a\nb\nc\n
+No match
+    a\nb\nc\n
+No match
+
+/((?m)^b)/
+    a\nb\nc\n
+ 0: b
+ 1: b
+
+/(?(1)a|b)/
+
+/(?(1)b|a)/
+    a
+ 0: a
+
+/(x)?(?(1)a|b)/
+    *** Failers
+No match
+    a
+No match
+    a
+No match
+
+/(x)?(?(1)b|a)/
+    a
+ 0: a
+
+/()?(?(1)b|a)/
+    a
+ 0: a
+
+/()(?(1)b|a)/
+
+/()?(?(1)a|b)/
+    a
+ 0: a
+ 1: 
+
+/^(\()?blah(?(1)(\)))$/
+    (blah)
+ 0: (blah)
+ 1: (
+ 2: )
+    blah
+ 0: blah
+    *** Failers
+No match
+    a
+No match
+    blah)
+No match
+    (blah
+No match
+
+/^(\(+)?blah(?(1)(\)))$/
+    (blah)
+ 0: (blah)
+ 1: (
+ 2: )
+    blah
+ 0: blah
+    *** Failers
+No match
+    blah)
+No match
+    (blah
+No match
+
+/(?(?!a)a|b)/
+
+/(?(?!a)b|a)/
+    a
+ 0: a
+
+/(?(?=a)b|a)/
+    *** Failers
+No match
+    a
+No match
+    a
+No match
+
+/(?(?=a)a|b)/
+    a
+ 0: a
+
+/(?=(a+?))(\1ab)/
+    aaab
+ 0: aab
+ 1: a
+ 2: aab
+
+/^(?=(a+?))\1ab/
+
+/(\w+:)+/
+    one:
+ 0: one:
+ 1: one:
+
+/$(?<=^(a))/
+    a
+ 0: 
+ 1: a
+
+/(?=(a+?))(\1ab)/
+    aaab
+ 0: aab
+ 1: a
+ 2: aab
+
+/^(?=(a+?))\1ab/
+    *** Failers
+No match
+    aaab
+No match
+    aaab
+No match
+
+/([\w:]+::)?(\w+)$/
+    abcd
+ 0: abcd
+ 1: <unset>
+ 2: abcd
+    xy:z:::abcd
+ 0: xy:z:::abcd
+ 1: xy:z:::
+ 2: abcd
+
+/^[^bcd]*(c+)/
+    aexycd
+ 0: aexyc
+ 1: c
+
+/(a*)b+/
+    caab
+ 0: aab
+ 1: aa
+
+/([\w:]+::)?(\w+)$/
+    abcd
+ 0: abcd
+ 1: <unset>
+ 2: abcd
+    xy:z:::abcd
+ 0: xy:z:::abcd
+ 1: xy:z:::
+ 2: abcd
+    *** Failers
+ 0: Failers
+ 1: <unset>
+ 2: Failers
+    abcd:
+No match
+    abcd:
+No match
+
+/^[^bcd]*(c+)/
+    aexycd
+ 0: aexyc
+ 1: c
+
+/(>a+)ab/
+
+/(?>a+)b/
+    aaab
+ 0: aaab
+
+/([[:]+)/
+    a:[b]:
+ 0: :[
+ 1: :[
+
+/([[=]+)/
+    a=[b]=
+ 0: =[
+ 1: =[
+
+/([[.]+)/
+    a.[b].
+ 0: .[
+ 1: .[
+
+/((?>a+)b)/
+    aaab
+ 0: aaab
+ 1: aaab
+
+/(?>(a+))b/
+    aaab
+ 0: aaab
+ 1: aaa
+
+/((?>[^()]+)|\([^()]*\))+/
+    ((abc(ade)ufh()()x
+ 0: abc(ade)ufh()()x
+ 1: x
+
+/a\Z/
+    *** Failers
+No match
+    aaab
+No match
+    a\nb\n
+No match
+
+/b\Z/
+    a\nb\n
+ 0: b
+
+/b\z/
+
+/b\Z/
+    a\nb
+ 0: b
+
+/b\z/
+    a\nb
+ 0: b
+    *** Failers
+No match
+    
+/^(?>(?(1)\.|())[^\W_](?>[a-z0-9-]*[^\W_])?)+$/
+    a
+ 0: a
+ 1: 
+    abc
+ 0: abc
+ 1: 
+    a-b
+ 0: a-b
+ 1: 
+    0-9 
+ 0: 0-9
+ 1: 
+    a.b
+ 0: a.b
+ 1: 
+    5.6.7  
+ 0: 5.6.7
+ 1: 
+    the.quick.brown.fox
+ 0: the.quick.brown.fox
+ 1: 
+    a100.b200.300c  
+ 0: a100.b200.300c
+ 1: 
+    12-ab.1245 
+ 0: 12-ab.1245
+ 1: 
+    ***Failers
+No match
+    \
+No match
+    .a
+No match
+    -a
+No match
+    a-
+No match
+    a.  
+No match
+    a_b 
+No match
+    a.-
+No match
+    a..  
+No match
+    ab..bc 
+No match
+    the.quick.brown.fox-
+No match
+    the.quick.brown.fox.
+No match
+    the.quick.brown.fox_
+No match
+    the.quick.brown.fox+       
+No match
+
+/(?>.*)(?<=(abcd|wxyz))/
+    alphabetabcd
+ 0: alphabetabcd
+ 1: abcd
+    endingwxyz
+ 0: endingwxyz
+ 1: wxyz
+    *** Failers
+No match
+    a rather long string that doesn't end with one of them
+No match
+
+/word (?>(?:(?!otherword)[a-zA-Z0-9]+ ){0,30})otherword/
+    word cat dog elephant mussel cow horse canary baboon snake shark otherword
+ 0: word cat dog elephant mussel cow horse canary baboon snake shark otherword
+    word cat dog elephant mussel cow horse canary baboon snake shark
+No match
+  
+/word (?>[a-zA-Z0-9]+ ){0,30}otherword/
+    word cat dog elephant mussel cow horse canary baboon snake shark the quick brown fox and the lazy dog and several other words getting close to thirty by now I hope
+No match
+
+/(?<=\d{3}(?!999))foo/
+    999foo
+ 0: foo
+    123999foo 
+ 0: foo
+    *** Failers
+No match
+    123abcfoo
+No match
+    
+/(?<=(?!...999)\d{3})foo/
+    999foo
+ 0: foo
+    123999foo 
+ 0: foo
+    *** Failers
+No match
+    123abcfoo
+No match
+
+/(?<=\d{3}(?!999)...)foo/
+    123abcfoo
+ 0: foo
+    123456foo 
+ 0: foo
+    *** Failers
+No match
+    123999foo  
+No match
+    
+/(?<=\d{3}...)(?<!999)foo/
+    123abcfoo   
+ 0: foo
+    123456foo 
+ 0: foo
+    *** Failers
+No match
+    123999foo  
+No match
+
+/<a[\s]+href[\s]*=[\s]*          # find <a href=
+ ([\"\'])?                       # find single or double quote
+ (?(1) (.*?)\1 | ([^\s]+))       # if quote found, match up to next matching
+                                 # quote, otherwise match up to next space
+/isx
+    <a href=abcd xyz
+ 0: <a href=abcd
+ 1: <unset>
+ 2: <unset>
+ 3: abcd
+    <a href=\"abcd xyz pqr\" cats
+ 0: <a href="abcd xyz pqr"
+ 1: "
+ 2: abcd xyz pqr
+    <a href=\'abcd xyz pqr\' cats
+ 0: <a href='abcd xyz pqr'
+ 1: '
+ 2: abcd xyz pqr
+
+/<a\s+href\s*=\s*                # find <a href=
+ (["'])?                         # find single or double quote
+ (?(1) (.*?)\1 | (\S+))          # if quote found, match up to next matching
+                                 # quote, otherwise match up to next space
+/isx
+    <a href=abcd xyz
+ 0: <a href=abcd
+ 1: <unset>
+ 2: <unset>
+ 3: abcd
+    <a href=\"abcd xyz pqr\" cats
+ 0: <a href="abcd xyz pqr"
+ 1: "
+ 2: abcd xyz pqr
+    <a href       =       \'abcd xyz pqr\' cats
+ 0: <a href       =       'abcd xyz pqr'
+ 1: '
+ 2: abcd xyz pqr
+
+/<a\s+href(?>\s*)=(?>\s*)        # find <a href=
+ (["'])?                         # find single or double quote
+ (?(1) (.*?)\1 | (\S+))          # if quote found, match up to next matching
+                                 # quote, otherwise match up to next space
+/isx
+    <a href=abcd xyz
+ 0: <a href=abcd
+ 1: <unset>
+ 2: <unset>
+ 3: abcd
+    <a href=\"abcd xyz pqr\" cats
+ 0: <a href="abcd xyz pqr"
+ 1: "
+ 2: abcd xyz pqr
+    <a href       =       \'abcd xyz pqr\' cats
+ 0: <a href       =       'abcd xyz pqr'
+ 1: '
+ 2: abcd xyz pqr
+
+/ End of test input /       
+
diff --git a/srclib/pcre/testdata/testoutput4 b/srclib/pcre/testdata/testoutput4
new file mode 100644
index 0000000000..d951b48861
--- /dev/null
+++ b/srclib/pcre/testdata/testoutput4
@@ -0,0 +1,115 @@
+PCRE version 3.1 09-Feb-2000
+
+/^[\w]+/
+    *** Failers
+No match
+    �cole
+No match
+
+/^[\w]+/Lfr
+    �cole
+ 0: �cole
+
+/^[\w]+/
+    *** Failers
+No match
+    �cole
+No match
+
+/^[\W]+/
+    �cole
+ 0: \xc9
+
+/^[\W]+/Lfr
+    *** Failers
+ 0: *** 
+    �cole
+No match
+
+/[\b]/
+    \b
+ 0: \x08
+    *** Failers
+No match
+    a
+No match
+
+/[\b]/Lfr
+    \b
+ 0: \x08
+    *** Failers
+No match
+    a
+No match
+
+/^\w+/
+    *** Failers
+No match
+    �cole
+No match
+
+/^\w+/Lfr
+    �cole
+ 0: �cole
+
+/(.+)\b(.+)/
+    �cole
+ 0: \xc9cole
+ 1: \xc9
+ 2: cole
+
+/(.+)\b(.+)/Lfr
+    *** Failers
+ 0: *** Failers
+ 1: *** 
+ 2: Failers
+    �cole
+No match
+
+/�cole/i
+    �cole
+ 0: \xc9cole
+    *** Failers
+No match
+    �cole
+No match
+
+/�cole/iLfr
+    �cole
+ 0: �cole
+    �cole
+ 0: �cole
+
+/\w/IS
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+Starting character set: 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P 
+  Q R S T U V W X Y Z _ a b c d e f g h i j k l m n o p q r s t u v w x y z 
+
+/\w/ISLfr
+Capturing subpattern count = 0
+No options
+No first char
+No need char
+Starting character set: 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P 
+  Q R S T U V W X Y Z _ a b c d e f g h i j k l m n o p q r s t u v w x y z 
+  � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 
+  � � � � � � � � � � � � � � � � � � � � � � � � � 
+
+/^[\xc8-\xc9]/iLfr
+    �cole
+ 0: �
+    �cole
+ 0: �
+
+/^[\xc8-\xc9]/Lfr
+    �cole
+ 0: �
+    *** Failers 
+No match
+    �cole
+No match
+
+