From e63927f462bf464fc9a2b3ca8a2e07413732a149 Mon Sep 17 00:00:00 2001 From: Yann Ylavic Date: Thu, 7 Nov 2019 12:09:29 +0000 Subject: Never checkin generated files applied to build/apr_common.m4. git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@1869500 13f79535-47bb-0310-9956-ffa450edef68 --- build/apr_common.m4 | 1023 --------------------------------------------------- 1 file changed, 1023 deletions(-) delete mode 100644 build/apr_common.m4 (limited to 'build') diff --git a/build/apr_common.m4 b/build/apr_common.m4 deleted file mode 100644 index f4e2dfd0a7..0000000000 --- a/build/apr_common.m4 +++ /dev/null @@ -1,1023 +0,0 @@ -dnl -------------------------------------------------------- -*- autoconf -*- -dnl Licensed to the Apache Software Foundation (ASF) under one or more -dnl contributor license agreements. See the NOTICE file distributed with -dnl this work for additional information regarding copyright ownership. -dnl The ASF licenses this file to You under the Apache License, Version 2.0 -dnl (the "License"); you may not use this file except in compliance with -dnl the License. You may obtain a copy of the License at -dnl -dnl http://www.apache.org/licenses/LICENSE-2.0 -dnl -dnl Unless required by applicable law or agreed to in writing, software -dnl distributed under the License is distributed on an "AS IS" BASIS, -dnl WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -dnl See the License for the specific language governing permissions and -dnl limitations under the License. - -dnl -dnl apr_common.m4: APR's general-purpose autoconf macros -dnl - -dnl -dnl APR_CONFIG_NICE(filename) -dnl -dnl Saves a snapshot of the configure command-line for later reuse -dnl -AC_DEFUN([APR_CONFIG_NICE], [ - rm -f $1 - cat >$1<> $1 - fi - if test -n "$CFLAGS"; then - echo "CFLAGS=\"$CFLAGS\"; export CFLAGS" >> $1 - fi - if test -n "$CPPFLAGS"; then - echo "CPPFLAGS=\"$CPPFLAGS\"; export CPPFLAGS" >> $1 - fi - if test -n "$LDFLAGS"; then - echo "LDFLAGS=\"$LDFLAGS\"; export LDFLAGS" >> $1 - fi - if test -n "$LTFLAGS"; then - echo "LTFLAGS=\"$LTFLAGS\"; export LTFLAGS" >> $1 - fi - if test -n "$LIBS"; then - echo "LIBS=\"$LIBS\"; export LIBS" >> $1 - fi - if test -n "$INCLUDES"; then - echo "INCLUDES=\"$INCLUDES\"; export INCLUDES" >> $1 - fi - if test -n "$NOTEST_CFLAGS"; then - echo "NOTEST_CFLAGS=\"$NOTEST_CFLAGS\"; export NOTEST_CFLAGS" >> $1 - fi - if test -n "$NOTEST_CPPFLAGS"; then - echo "NOTEST_CPPFLAGS=\"$NOTEST_CPPFLAGS\"; export NOTEST_CPPFLAGS" >> $1 - fi - if test -n "$NOTEST_LDFLAGS"; then - echo "NOTEST_LDFLAGS=\"$NOTEST_LDFLAGS\"; export NOTEST_LDFLAGS" >> $1 - fi - if test -n "$NOTEST_LIBS"; then - echo "NOTEST_LIBS=\"$NOTEST_LIBS\"; export NOTEST_LIBS" >> $1 - fi - - # Retrieve command-line arguments. - eval "set x $[0] $ac_configure_args" - shift - - for arg - do - APR_EXPAND_VAR(arg, $arg) - echo "\"[$]arg\" \\" >> $1 - done - echo '"[$]@"' >> $1 - chmod +x $1 -])dnl - -dnl APR_MKDIR_P_CHECK(fallback-mkdir-p) -dnl checks whether mkdir -p works -AC_DEFUN([APR_MKDIR_P_CHECK], [ - AC_CACHE_CHECK(for working mkdir -p, ac_cv_mkdir_p,[ - test -d conftestdir && rm -rf conftestdir - mkdir -p conftestdir/somedir >/dev/null 2>&1 - if test -d conftestdir/somedir; then - ac_cv_mkdir_p=yes - else - ac_cv_mkdir_p=no - fi - rm -rf conftestdir - ]) - if test "$ac_cv_mkdir_p" = "yes"; then - mkdir_p="mkdir -p" - else - mkdir_p="$1" - fi -]) - -dnl -dnl APR_SUBDIR_CONFIG(dir [, sub-package-cmdline-args, args-to-drop]) -dnl -dnl dir: directory to find configure in -dnl sub-package-cmdline-args: arguments to add to the invocation (optional) -dnl args-to-drop: arguments to drop from the invocation (optional) -dnl -dnl Note: This macro relies on ac_configure_args being set properly. -dnl -dnl The args-to-drop argument is shoved into a case statement, so -dnl multiple arguments can be separated with a |. -dnl -dnl Note: Older versions of autoconf do not single-quote args, while 2.54+ -dnl places quotes around every argument. So, if you want to drop the -dnl argument called --enable-layout, you must pass the third argument as: -dnl [--enable-layout=*|\'--enable-layout=*] -dnl -dnl Trying to optimize this is left as an exercise to the reader who wants -dnl to put up with more autoconf craziness. I give up. -dnl -AC_DEFUN([APR_SUBDIR_CONFIG], [ - # save our work to this point; this allows the sub-package to use it - AC_CACHE_SAVE - - echo "configuring package in $1 now" - ac_popdir=`pwd` - apr_config_subdirs="$1" - test -d $1 || $mkdir_p $1 - ac_abs_srcdir=`(cd $srcdir/$1 && pwd)` - cd $1 - -changequote(, )dnl - # A "../" for each directory in /$config_subdirs. - ac_dots=`echo $apr_config_subdirs|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'` -changequote([, ])dnl - - # Make the cache file pathname absolute for the subdirs - # required to correctly handle subdirs that might actually - # be symlinks - case "$cache_file" in - /*) # already absolute - ac_sub_cache_file=$cache_file ;; - *) # Was relative path. - ac_sub_cache_file="$ac_popdir/$cache_file" ;; - esac - - ifelse($3, [], [apr_configure_args=$ac_configure_args],[ - apr_configure_args= - apr_sep= - for apr_configure_arg in $ac_configure_args - do - case "$apr_configure_arg" in - $3) - continue ;; - esac - apr_configure_args="$apr_configure_args$apr_sep'$apr_configure_arg'" - apr_sep=" " - done - ]) - - dnl autoconf doesn't add --silent to ac_configure_args; explicitly pass it - test "x$silent" = "xyes" && apr_configure_args="$apr_configure_args --silent" - - dnl AC_CONFIG_SUBDIRS silences option warnings, emulate this for 2.62 - apr_configure_args="--disable-option-checking $apr_configure_args" - - dnl The eval makes quoting arguments work - specifically the second argument - dnl where the quoting mechanisms used is "" rather than []. - dnl - dnl We need to execute another shell because some autoconf/shell combinations - dnl will choke after doing repeated APR_SUBDIR_CONFIG()s. (Namely Solaris - dnl and autoconf-2.54+) - if eval $SHELL $ac_abs_srcdir/configure $apr_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_abs_srcdir $2 - then : - echo "$1 configured properly" - else - echo "configure failed for $1" - exit 1 - fi - - cd $ac_popdir - - # grab any updates from the sub-package - AC_CACHE_LOAD -])dnl - -dnl -dnl APR_SAVE_THE_ENVIRONMENT(variable_name) -dnl -dnl Stores the variable (usually a Makefile macro) for later restoration -dnl -AC_DEFUN([APR_SAVE_THE_ENVIRONMENT], [ - apr_ste_save_$1="$$1" -])dnl - -dnl -dnl APR_RESTORE_THE_ENVIRONMENT(variable_name, prefix_) -dnl -dnl Uses the previously saved variable content to figure out what configure -dnl has added to the variable, moving the new bits to prefix_variable_name -dnl and restoring the original variable contents. This makes it possible -dnl for a user to override configure when it does something stupid. -dnl -AC_DEFUN([APR_RESTORE_THE_ENVIRONMENT], [ -dnl Check whether $apr_ste_save_$1 is empty or -dnl only whitespace. The verbatim "X" is token number 1, -dnl the following whitespace will be ignored. -set X $apr_ste_save_$1 -if test ${#} -eq 1; then - $2$1="$$1" - $1= -else - if test "x$apr_ste_save_$1" = "x$$1"; then - $2$1= - else - $2$1=`echo "$$1" | sed -e "s%${apr_ste_save_$1}%%"` - $1="$apr_ste_save_$1" - fi -fi -if test "x$silent" != "xyes"; then - echo " restoring $1 to \"$$1\"" - echo " setting $2$1 to \"$$2$1\"" -fi -AC_SUBST($2$1) -])dnl - -dnl -dnl APR_SETIFNULL(variable, value) -dnl -dnl Set variable iff it's currently null -dnl -AC_DEFUN([APR_SETIFNULL], [ - if test -z "$$1"; then - test "x$silent" != "xyes" && echo " setting $1 to \"$2\"" - $1="$2" - fi -])dnl - -dnl -dnl APR_SETVAR(variable, value) -dnl -dnl Set variable no matter what -dnl -AC_DEFUN([APR_SETVAR], [ - test "x$silent" != "xyes" && echo " forcing $1 to \"$2\"" - $1="$2" -])dnl - -dnl -dnl APR_ADDTO(variable, value) -dnl -dnl Add value to variable -dnl -AC_DEFUN([APR_ADDTO], [ - if test "x$$1" = "x"; then - test "x$silent" != "xyes" && echo " setting $1 to \"$2\"" - $1="$2" - else - apr_addto_bugger="$2" - for i in $apr_addto_bugger; do - apr_addto_duplicate="0" - for j in $$1; do - if test "x$i" = "x$j"; then - apr_addto_duplicate="1" - break - fi - done - if test $apr_addto_duplicate = "0"; then - test "x$silent" != "xyes" && echo " adding \"$i\" to $1" - $1="$$1 $i" - fi - done - fi -])dnl - -dnl -dnl APR_REMOVEFROM(variable, value) -dnl -dnl Remove a value from a variable -dnl -AC_DEFUN([APR_REMOVEFROM], [ - if test "x$$1" = "x$2"; then - test "x$silent" != "xyes" && echo " nulling $1" - $1="" - else - apr_new_bugger="" - apr_removed=0 - for i in $$1; do - if test "x$i" != "x$2"; then - apr_new_bugger="$apr_new_bugger $i" - else - apr_removed=1 - fi - done - if test $apr_removed = "1"; then - test "x$silent" != "xyes" && echo " removed \"$2\" from $1" - $1=$apr_new_bugger - fi - fi -]) dnl - -dnl -dnl APR_CHECK_DEFINE_FILES( symbol, header_file [header_file ...] ) -dnl -AC_DEFUN([APR_CHECK_DEFINE_FILES], [ - AC_CACHE_CHECK([for $1 in $2],ac_cv_define_$1,[ - ac_cv_define_$1=no - for curhdr in $2 - do - AC_EGREP_CPP(YES_IS_DEFINED, [ -#include <$curhdr> -#ifdef $1 -YES_IS_DEFINED -#endif - ], ac_cv_define_$1=yes) - done - ]) - if test "$ac_cv_define_$1" = "yes"; then - AC_DEFINE(HAVE_$1, 1, [Define if $1 is defined]) - fi -]) - - -dnl -dnl APR_CHECK_DEFINE(symbol, header_file) -dnl -AC_DEFUN([APR_CHECK_DEFINE], [ - AC_CACHE_CHECK([for $1 in $2],ac_cv_define_$1,[ - AC_EGREP_CPP(YES_IS_DEFINED, [ -#include <$2> -#ifdef $1 -YES_IS_DEFINED -#endif - ], ac_cv_define_$1=yes, ac_cv_define_$1=no) - ]) - if test "$ac_cv_define_$1" = "yes"; then - AC_DEFINE(HAVE_$1, 1, [Define if $1 is defined in $2]) - fi -]) - -dnl -dnl APR_CHECK_APR_DEFINE( symbol ) -dnl -AC_DEFUN([APR_CHECK_APR_DEFINE], [ -apr_old_cppflags=$CPPFLAGS -CPPFLAGS="$CPPFLAGS $INCLUDES" -AC_EGREP_CPP(YES_IS_DEFINED, [ -#include -#if $1 -YES_IS_DEFINED -#endif -], ac_cv_define_$1=yes, ac_cv_define_$1=no) -CPPFLAGS=$apr_old_cppflags -]) - -dnl APR_CHECK_FILE(filename); set ac_cv_file_filename to -dnl "yes" if 'filename' is readable, else "no". -dnl @deprecated! - use AC_CHECK_FILE instead -AC_DEFUN([APR_CHECK_FILE], [ -dnl Pick a safe variable name -define([apr_cvname], ac_cv_file_[]translit([$1], [./+-], [__p_])) -AC_CACHE_CHECK([for $1], [apr_cvname], -[if test -r $1; then - apr_cvname=yes - else - apr_cvname=no - fi]) -]) - -define(APR_IFALLYES,[dnl -ac_rc=yes -for ac_spec in $1; do - ac_type=`echo "$ac_spec" | sed -e 's/:.*$//'` - ac_item=`echo "$ac_spec" | sed -e 's/^.*://'` - case $ac_type in - header ) - ac_item=`echo "$ac_item" | sed 'y%./+-%__p_%'` - ac_var="ac_cv_header_$ac_item" - ;; - file ) - ac_item=`echo "$ac_item" | sed 'y%./+-%__p_%'` - ac_var="ac_cv_file_$ac_item" - ;; - func ) ac_var="ac_cv_func_$ac_item" ;; - struct ) ac_var="ac_cv_struct_$ac_item" ;; - define ) ac_var="ac_cv_define_$ac_item" ;; - custom ) ac_var="$ac_item" ;; - esac - eval "ac_val=\$$ac_var" - if test ".$ac_val" != .yes; then - ac_rc=no - break - fi -done -if test ".$ac_rc" = .yes; then - : - $2 -else - : - $3 -fi -]) - - -define(APR_BEGIN_DECISION,[dnl -ac_decision_item='$1' -ac_decision_msg='FAILED' -ac_decision='' -]) - - -AC_DEFUN([APR_DECIDE],[dnl -dnl Define the flag (or not) in apr_private.h via autoheader -AH_TEMPLATE($1, [Define if $2 will be used]) -ac_decision='$1' -ac_decision_msg='$2' -ac_decision_$1=yes -ac_decision_$1_msg='$2' -]) - - -define(APR_DECISION_OVERRIDE,[dnl - ac_decision='' - for ac_item in $1; do - eval "ac_decision_this=\$ac_decision_${ac_item}" - if test ".$ac_decision_this" = .yes; then - ac_decision=$ac_item - eval "ac_decision_msg=\$ac_decision_${ac_item}_msg" - fi - done -]) - - -define(APR_DECISION_FORCE,[dnl -ac_decision="$1" -eval "ac_decision_msg=\"\$ac_decision_${ac_decision}_msg\"" -]) - - -define(APR_END_DECISION,[dnl -if test ".$ac_decision" = .; then - echo "[$]0:Error: decision on $ac_decision_item failed" 1>&2 - exit 1 -else - if test ".$ac_decision_msg" = .; then - ac_decision_msg="$ac_decision" - fi - AC_DEFINE_UNQUOTED(${ac_decision_item}) - AC_MSG_RESULT([decision on $ac_decision_item... $ac_decision_msg]) -fi -]) - - -dnl -dnl APR_CHECK_SIZEOF_EXTENDED(INCLUDES, TYPE [, CROSS_SIZE]) -dnl -dnl A variant of AC_CHECK_SIZEOF which allows the checking of -dnl sizes of non-builtin types -dnl -AC_DEFUN([APR_CHECK_SIZEOF_EXTENDED], -[changequote(<<, >>)dnl -dnl The name to #define. -define(<>, translit(sizeof_$2, [a-z *], [A-Z_P]))dnl -dnl The cache variable name. -define(<>, translit(ac_cv_sizeof_$2, [ *], [_p]))dnl -changequote([, ])dnl -AC_MSG_CHECKING(size of $2) -AC_CACHE_VAL(AC_CV_NAME, -[AC_TRY_RUN([#include -$1 -#ifdef WIN32 -#define binmode "b" -#else -#define binmode -#endif -main() -{ - FILE *f=fopen("conftestval", "w" binmode); - if (!f) exit(1); - fprintf(f, "%d\n", sizeof($2)); - exit(0); -}], AC_CV_NAME=`cat conftestval`, AC_CV_NAME=0, ifelse([$3],,, -AC_CV_NAME=$3))])dnl -AC_MSG_RESULT($AC_CV_NAME) -AC_DEFINE_UNQUOTED(AC_TYPE_NAME, $AC_CV_NAME, [The size of ]$2) -undefine([AC_TYPE_NAME])dnl -undefine([AC_CV_NAME])dnl -]) - - -dnl -dnl APR_TRY_COMPILE_NO_WARNING(INCLUDES, FUNCTION-BODY, -dnl [ACTIONS-IF-NO-WARNINGS], [ACTIONS-IF-WARNINGS]) -dnl -dnl Tries a compile test with warnings activated so that the result -dnl is false if the code doesn't compile cleanly. For compilers -dnl where it is not known how to activate a "fail-on-error" mode, -dnl it is undefined which of the sets of actions will be run. -dnl -AC_DEFUN([APR_TRY_COMPILE_NO_WARNING], -[apr_save_CFLAGS=$CFLAGS - CFLAGS="$CFLAGS $CFLAGS_WARN" - if test "$ac_cv_prog_gcc" = "yes"; then - CFLAGS="$CFLAGS -Werror" - fi - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [#include "confdefs.h" - ] - [[$1]] - [int main(int argc, const char *const *argv) {] - [[$2]] - [ return 0; }] - )], [CFLAGS=$apr_save_CFLAGS -$3], [CFLAGS=$apr_save_CFLAGS -$4]) -]) - -dnl -dnl APR_CHECK_STRERROR_R_RC -dnl -dnl Decide which style of retcode is used by this system's -dnl strerror_r(). It either returns int (0 for success, -1 -dnl for failure), or it returns a pointer to the error -dnl string. -dnl -dnl -AC_DEFUN([APR_CHECK_STRERROR_R_RC], [ -AC_MSG_CHECKING(for type of return code from strerror_r) -AC_TRY_RUN([ -#include -#include -#include -main() -{ - char buf[1024]; - if (strerror_r(ERANGE, buf, sizeof buf) < 1) { - exit(0); - } - else { - exit(1); - } -}], [ - ac_cv_strerror_r_rc_int=yes ], [ - ac_cv_strerror_r_rc_int=no ], [ - ac_cv_strerror_r_rc_int=no ] ) -if test "x$ac_cv_strerror_r_rc_int" = xyes; then - AC_DEFINE(STRERROR_R_RC_INT, 1, [Define if strerror returns int]) - msg="int" -else - msg="pointer" -fi -AC_MSG_RESULT([$msg]) -] ) - -dnl -dnl APR_CHECK_DIRENT_INODE -dnl -dnl Decide if d_fileno or d_ino are available in the dirent -dnl structure on this platform. Single UNIX Spec says d_ino, -dnl BSD uses d_fileno. Undef to find the real beast. -dnl -AC_DEFUN([APR_CHECK_DIRENT_INODE], [ -AC_CACHE_CHECK([for inode member of struct dirent], apr_cv_dirent_inode, [ -apr_cv_dirent_inode=no -AC_TRY_COMPILE([ -#include -#include -],[ -#ifdef d_ino -#undef d_ino -#endif -struct dirent de; de.d_fileno; -], apr_cv_dirent_inode=d_fileno) -if test "$apr_cv_dirent_inode" = "no"; then -AC_TRY_COMPILE([ -#include -#include -],[ -#ifdef d_fileno -#undef d_fileno -#endif -struct dirent de; de.d_ino; -], apr_cv_dirent_inode=d_ino) -fi -]) -if test "$apr_cv_dirent_inode" != "no"; then - AC_DEFINE_UNQUOTED(DIRENT_INODE, $apr_cv_dirent_inode, - [Define if struct dirent has an inode member]) -fi -]) - -dnl -dnl APR_CHECK_DIRENT_TYPE -dnl -dnl Decide if d_type is available in the dirent structure -dnl on this platform. Not part of the Single UNIX Spec. -dnl Note that this is worthless without DT_xxx macros, so -dnl look for one while we are at it. -dnl -AC_DEFUN([APR_CHECK_DIRENT_TYPE], [ -AC_CACHE_CHECK([for file type member of struct dirent], apr_cv_dirent_type,[ -apr_cv_dirent_type=no -AC_TRY_COMPILE([ -#include -#include -],[ -struct dirent de; de.d_type = DT_REG; -], apr_cv_dirent_type=d_type) -]) -if test "$apr_cv_dirent_type" != "no"; then - AC_DEFINE_UNQUOTED(DIRENT_TYPE, $apr_cv_dirent_type, - [Define if struct dirent has a d_type member]) -fi -]) - -dnl the following is a newline, a space, a tab, and a backslash (the -dnl backslash is used by the shell to skip newlines, but m4 sees it; -dnl treat it like whitespace). -dnl WARNING: don't reindent these lines, or the space/tab will be lost! -define([apr_whitespace],[ - \]) - -dnl -dnl APR_COMMA_ARGS(ARG1 ...) -dnl convert the whitespace-separated arguments into comman-separated -dnl arguments. -dnl -dnl APR_FOREACH(CODE-BLOCK, ARG1, ARG2, ...) -dnl subsitute CODE-BLOCK for each ARG[i]. "eachval" will be set to ARG[i] -dnl within each iteration. -dnl -changequote({,}) -define({APR_COMMA_ARGS},{patsubst([$}{1],[[}apr_whitespace{]+],[,])}) -define({APR_FOREACH}, - {ifelse($}{2,,, - [define([eachval], - $}{2)$}{1[]APR_FOREACH([$}{1], - builtin([shift], - builtin([shift], $}{@)))])}) -changequote([,]) - -dnl APR_FLAG_HEADERS(HEADER-FILE ... [, FLAG-TO-SET ] [, "yes" ]) -dnl we set FLAG-TO-SET to 1 if we find HEADER-FILE, otherwise we set to 0 -dnl if FLAG-TO-SET is null, we automagically determine it's name -dnl by changing all "/" to "_" in the HEADER-FILE and dropping -dnl all "." and "-" chars. If the 3rd parameter is "yes" then instead of -dnl setting to 1 or 0, we set FLAG-TO-SET to yes or no. -dnl -AC_DEFUN([APR_FLAG_HEADERS], [ -AC_CHECK_HEADERS($1) -for aprt_i in $1 -do - ac_safe=`echo "$aprt_i" | sed 'y%./+-%__p_%'` - aprt_2=`echo "$aprt_i" | sed -e 's%/%_%g' -e 's/\.//g' -e 's/-//g'` - if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - eval "ifelse($2,,$aprt_2,$2)=ifelse($3,yes,yes,1)" - else - eval "ifelse($2,,$aprt_2,$2)=ifelse($3,yes,no,0)" - fi -done -]) - -dnl APR_FLAG_FUNCS(FUNC ... [, FLAG-TO-SET] [, "yes" ]) -dnl if FLAG-TO-SET is null, we automagically determine it's name -dnl prepending "have_" to the function name in FUNC, otherwise -dnl we use what's provided as FLAG-TO-SET. If the 3rd parameter -dnl is "yes" then instead of setting to 1 or 0, we set FLAG-TO-SET -dnl to yes or no. -dnl -AC_DEFUN([APR_FLAG_FUNCS], [ -AC_CHECK_FUNCS($1) -for aprt_j in $1 -do - aprt_3="have_$aprt_j" - if eval "test \"`echo '$ac_cv_func_'$aprt_j`\" = yes"; then - eval "ifelse($2,,$aprt_3,$2)=ifelse($3,yes,yes,1)" - else - eval "ifelse($2,,$aprt_3,$2)=ifelse($3,yes,no,0)" - fi -done -]) - -dnl Iteratively interpolate the contents of the second argument -dnl until interpolation offers no new result. Then assign the -dnl final result to $1. -dnl -dnl Example: -dnl -dnl foo=1 -dnl bar='${foo}/2' -dnl baz='${bar}/3' -dnl APR_EXPAND_VAR(fraz, $baz) -dnl $fraz is now "1/2/3" -dnl -AC_DEFUN([APR_EXPAND_VAR], [ -ap_last= -ap_cur="$2" -while test "x${ap_cur}" != "x${ap_last}"; -do - ap_last="${ap_cur}" - ap_cur=`eval "echo ${ap_cur}"` -done -$1="${ap_cur}" -]) - -dnl -dnl Removes the value of $3 from the string in $2, strips of any leading -dnl slashes, and returns the value in $1. -dnl -dnl Example: -dnl orig_path="${prefix}/bar" -dnl APR_PATH_RELATIVE(final_path, $orig_path, $prefix) -dnl $final_path now contains "bar" -AC_DEFUN([APR_PATH_RELATIVE], [ -ap_stripped=`echo $2 | sed -e "s#^$3##"` -# check if the stripping was successful -if test "x$2" != "x${ap_stripped}"; then - # it was, so strip of any leading slashes - $1="`echo ${ap_stripped} | sed -e 's#^/*##'`" -else - # it wasn't so return the original - $1="$2" -fi -]) - -dnl APR_HELP_STRING(LHS, RHS) -dnl Autoconf 2.50 can not handle substr correctly. It does have -dnl AC_HELP_STRING, so let's try to call it if we can. -dnl Note: this define must be on one line so that it can be properly returned -dnl as the help string. When using this macro with a multi-line RHS, ensure -dnl that you surround the macro invocation with []s -AC_DEFUN([APR_HELP_STRING], [ifelse(regexp(AC_ACVERSION, 2\.1), -1, AC_HELP_STRING([$1],[$2]),[ ][$1] substr([ ],len($1))[$2])]) - -dnl -dnl APR_LAYOUT(configlayout, layoutname [, extravars]) -dnl -AC_DEFUN([APR_LAYOUT], [ - if test ! -f $srcdir/config.layout; then - echo "** Error: Layout file $srcdir/config.layout not found" - echo "** Error: Cannot use undefined layout '$LAYOUT'" - exit 1 - fi - # Catch layout names including a slash which will otherwise - # confuse the heck out of the sed script. - case $2 in - */*) - echo "** Error: $2 is not a valid layout name" - exit 1 ;; - esac - pldconf=./config.pld - changequote({,}) - sed -e "1s/[ ]*<[lL]ayout[ ]*$2[ ]*>[ ]*//;1t" \ - -e "1,/[ ]*<[lL]ayout[ ]*$2[ ]*>[ ]*/d" \ - -e '/[ ]*<\/Layout>[ ]*/,$d' \ - -e "s/^[ ]*//g" \ - -e "s/:[ ]*/=\'/g" \ - -e "s/[ ]*$/'/g" \ - $1 > $pldconf - layout_name=$2 - if test ! -s $pldconf; then - echo "** Error: unable to find layout $layout_name" - exit 1 - fi - . $pldconf - rm $pldconf - for var in prefix exec_prefix bindir sbindir libexecdir mandir \ - sysconfdir datadir includedir localstatedir runtimedir \ - logfiledir libdir installbuilddir libsuffix $3; do - eval "val=\"\$$var\"" - case $val in - *+) - val=`echo $val | sed -e 's;\+$;;'` - eval "$var=\"\$val\"" - autosuffix=yes - ;; - *) - autosuffix=no - ;; - esac - val=`echo $val | sed -e 's:\(.\)/*$:\1:'` - val=`echo $val | sed -e 's:[\$]\([a-z_]*\):${\1}:g'` - if test "$autosuffix" = "yes"; then - if echo $val | grep apache >/dev/null; then - addtarget=no - else - addtarget=yes - fi - if test "$addtarget" = "yes"; then - val="$val/apache2" - fi - fi - eval "$var='$val'" - done - changequote([,]) -])dnl - -dnl -dnl APR_ENABLE_LAYOUT(default layout name [, extra vars]) -dnl -AC_DEFUN([APR_ENABLE_LAYOUT], [ -AC_ARG_ENABLE(layout, -[ --enable-layout=LAYOUT],[ - LAYOUT=$enableval -]) - -if test -z "$LAYOUT"; then - LAYOUT="$1" -fi -APR_LAYOUT($srcdir/config.layout, $LAYOUT, $2) - -AC_MSG_CHECKING(for chosen layout) -AC_MSG_RESULT($layout_name) -]) - - -dnl -dnl APR_PARSE_ARGUMENTS -dnl a reimplementation of autoconf's argument parser, -dnl used here to allow us to co-exist layouts and argument based -dnl set ups. -AC_DEFUN([APR_PARSE_ARGUMENTS], [ -ac_prev= -# Retrieve the command-line arguments. The eval is needed because -# the arguments are quoted to preserve accuracy. -eval "set x $ac_configure_args" -shift -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - ac_optarg=`expr "x$ac_option" : 'x[[^=]]*=\(.*\)'` - - case $ac_option in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir="$ac_optarg" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; - - esac -done - -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [[\\/$]]* | ?:[[\\/]]* | NONE | '' ) ;; - *) AC_MSG_ERROR([expected an absolute path for --$ac_var: $ac_val]);; - esac -done - -])dnl - -dnl -dnl APR_CHECK_DEPEND -dnl -dnl Determine what program we can use to generate .deps-style dependencies -dnl -AC_DEFUN([APR_CHECK_DEPEND], [ -dnl Try to determine what depend program we can use -dnl All GCC-variants should have -MM. -dnl If not, then we can check on those, too. -if test "$GCC" = "yes"; then - MKDEP='$(CC) -MM' -else - rm -f conftest.c -dnl should be available everywhere! - cat > conftest.c < - int main() { return 0; } -EOF - MKDEP="true" - for i in "$CC -MM" "$CC -M" "$CPP -MM" "$CPP -M" "cpp -M"; do - AC_MSG_CHECKING([if $i can create proper make dependencies]) - if $i conftest.c 2>/dev/null | grep 'conftest.o: conftest.c' >/dev/null; then - MKDEP=$i - AC_MSG_RESULT(yes) - break; - fi - AC_MSG_RESULT(no) - done - rm -f conftest.c -fi - -AC_SUBST(MKDEP) -]) - -dnl -dnl APR_CHECK_TYPES_FMT_COMPATIBLE(TYPE-1, TYPE-2, FMT-TAG, -dnl [ACTION-IF-TRUE], [ACTION-IF-FALSE]) -dnl -dnl Try to determine whether two types are the same and accept the given -dnl printf formatter (bare token, e.g. literal d, ld, etc). -dnl -AC_DEFUN([APR_CHECK_TYPES_FMT_COMPATIBLE], [ -define([apr_cvname], apr_cv_typematch_[]translit([$1], [ ], [_])_[]translit([$2], [ ], [_])_[][$3]) -AC_CACHE_CHECK([whether $1 and $2 use fmt %$3], apr_cvname, [ -APR_TRY_COMPILE_NO_WARNING([#include -#include -#ifdef HAVE_STDINT_H -#include -#endif -], [ - $1 chk1, *ptr1; - $2 chk2, *ptr2 = &chk1; - ptr1 = &chk2; - *ptr1 = *ptr2 = 0; - printf("%$3 %$3", chk1, chk2); -], [apr_cvname=yes], [apr_cvname=no])]) -if test "$apr_cvname" = "yes"; then - : - $4 -else - : - $5 -fi -]) - -dnl -dnl APR_CHECK_TYPES_COMPATIBLE(TYPE-1, TYPE-2, [ACTION-IF-TRUE]) -dnl -dnl Try to determine whether two types are the same. Only works -dnl for gcc and icc. -dnl -dnl @deprecated @see APR_CHECK_TYPES_FMT_COMPATIBLE -dnl -AC_DEFUN([APR_CHECK_TYPES_COMPATIBLE], [ -define([apr_cvname], apr_cv_typematch_[]translit([$1], [ ], [_])_[]translit([$2], [ ], [_])) -AC_CACHE_CHECK([whether $1 and $2 are the same], apr_cvname, [ -AC_TRY_COMPILE(AC_INCLUDES_DEFAULT, [ - int foo[0 - !__builtin_types_compatible_p($1, $2)]; -], [apr_cvname=yes -$3], [apr_cvname=no])]) -]) -- cgit v1.2.1