\input texinfo @c -*-texinfo-*- @comment ======================================================== @comment %**start of header @setfilename autoconf.info @include version.texi @settitle Autoconf @documentencoding UTF-8 @set txicodequoteundirected @set txicodequotebacktick @setchapternewpage odd @finalout @c @ovar(ARG) @c ---------- @c The ARG is an optional argument. To be used for macro arguments in @c their documentation (@defmac). @macro ovar{varname} @r{[}@var{\varname\}@r{]} @end macro @c @dvar(ARG, DEFAULT) @c ------------------- @c The ARG is an optional argument, defaulting to DEFAULT. To be used @c for macro arguments in their documentation (@defmac). @macro dvar{varname, default} @r{[}@var{\varname\} = @samp{\default\}@r{]} @end macro @c @dvarv(ARG, DEFAULT-VAR) @c ------------------------ @c Same as @dvar{ARG, DEFAULT-VAR}, but with @var instead of @samp @c around DEFAULT-VAR. @macro dvarv{varname, default} @r{[}@var{\varname\} = @var{\default\}@r{]}@c @end macro @c Handling the indexes with Texinfo yields several different problems. @c @c Because we want to drop out the AC_ part of the macro names in the @c printed manual, but not in the other outputs, we need a layer above @c the usual @acindex{} etc. That's why we first define indexes such as @c acx meant to become the macro @acindex. First of all, using 'ac_' @c does not work with makeinfo, and using 'ac1' doesn't work with TeX. @c So use something more regular 'acx'. Then you finish with a printed @c index saying 'index is not existent'. Of course: you ought to use @c two letters :( So you use capitals. @c @c Second, when defining a macro in the TeX world, following spaces are @c eaten. But then, since we embed @acxindex commands that use the end @c of line as an end marker, the whole things wrecks itself. So make @c sure you do *force* an additional end of line, add a '@c'. @c @c Finally, you might want to get rid of TeX expansion, using --expand @c with texi2dvi. But then you wake up an old problem: we use macros @c in @defmac etc. where TeX does perform the expansion, but not makeinfo. @c Define an environment variable index, for variables users may set @c in their environment or on the configure command line. @defcodeindex ev @c Define an output variable index, for commonly AC_SUBST'ed variables. @defcodeindex ov @c Define a cache variable index, for variables matching *_cv_*. @defcodeindex CA @c Other shell variables not fitting the above categories should be @c listed in the predefined vrindex, which we merge in the concept index. @syncodeindex vr cp @c Define a CPP preprocessor macro index, for #define'd strings. @defcodeindex cv @c Define an Autoconf macro index that @defmac doesn't write to. @defcodeindex AC @c Define an Autotest macro index that @defmac doesn't write to. @defcodeindex AT @c Define an M4sugar macro index that @defmac doesn't write to. @defcodeindex MS @c Define an index for *foreign* programs: 'mv' etc. Used for the @c portability sections and so on. @defindex pr @c shortindexflag @c -------------- @c Shall we factor AC_ out of the Autoconf macro index etc.? @iftex @set shortindexflag @end iftex @c @acindex{MACRO} @c --------------- @c Registering an AC_\MACRO\. @ifset shortindexflag @macro acindex{macro} @ACindex \macro\ @c @end macro @end ifset @ifclear shortindexflag @macro acindex{macro} @ACindex AC_\macro\ @end macro @end ifclear @c @ahindex{MACRO} @c --------------- @c Registering an AH_\MACRO\. @macro ahindex{macro} @ACindex AH_\macro\ @c @end macro @c @asindex{MACRO} @c --------------- @c Registering an AS_\MACRO\. @ifset shortindexflag @macro asindex{macro} @MSindex \macro\ @c @end macro @end ifset @ifclear shortindexflag @macro asindex{macro} @MSindex AS_\macro\ @end macro @end ifclear @c @atindex{MACRO} @c --------------- @c Registering an AT_\MACRO\. @ifset shortindexflag @macro atindex{macro} @ATindex \macro\ @c @end macro @end ifset @ifclear shortindexflag @macro atindex{macro} @ATindex AT_\macro\ @end macro @end ifclear @c @auindex{MACRO} @c --------------- @c Registering an AU_\MACRO\. @macro auindex{macro} @ACindex AU_\macro\ @c @end macro @c @hdrindex{MACRO} @c ---------------- @c Indexing a header. @macro hdrindex{macro} @prindex @file{\macro\} @c @end macro @c @msindex{MACRO} @c --------------- @c Registering an m4_\MACRO\. @ifset shortindexflag @macro msindex{macro} @MSindex \macro\ @c @end macro @end ifset @ifclear shortindexflag @macro msindex{macro} @MSindex m4_\macro\ @end macro @end ifclear @c @caindex{VARIABLE} @c ------------------ @c Registering an ac_cv_\VARIABLE\ cache variable. @ifset shortindexflag @macro caindex{macro} @CAindex \macro\ @end macro @end ifset @ifclear shortindexflag @macro caindex{macro} @CAindex ac_cv_\macro\ @end macro @end ifclear @c Define an index for functions: `alloca' etc. Used for the @c portability sections and so on. We can't use `fn' (aka `fnindex), @c since `@defmac' goes into it => we'd get all the macros too. @c FIXME: Aaarg! It seems there are too many indices for TeX :( @c @c ! No room for a new @write . @c l.112 @defcodeindex fu @c @c so don't define yet another one :( Just put some tags before each @c @prindex which is actually a @funindex. @c @c @defcodeindex fu @c @c @c @c Put the programs and functions into their own index. @c @syncodeindex fu pr @comment %**end of header @comment ======================================================== @copying This manual (@value{UPDATED}) is for GNU Autoconf (version @value{VERSION}), a package for creating scripts to configure source code packages using templates and an M4 macro package. Copyright @copyright{} 1992--1996, 1998--2017, 2020 Free Software Foundation, Inc. @quotation Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover texts, and no Back-Cover Texts. A copy of the license is included in the section entitled ``GNU Free Documentation License.'' @end quotation @end copying @dircategory Software development @direntry * Autoconf: (autoconf). Create source code configuration scripts. @end direntry @dircategory Individual utilities @direntry * autoscan: (autoconf)autoscan Invocation. Semi-automatic @file{configure.ac} writing * ifnames: (autoconf)ifnames Invocation. Listing conditionals in source. * autoconf-invocation: (autoconf)autoconf Invocation. How to create configuration scripts * autoreconf: (autoconf)autoreconf Invocation. Remaking multiple @command{configure} scripts * autoheader: (autoconf)autoheader Invocation. How to create configuration templates * autom4te: (autoconf)autom4te Invocation. The Autoconf executables backbone * configure: (autoconf)configure Invocation. Configuring a package. * autoupdate: (autoconf)autoupdate Invocation. Automatic update of @file{configure.ac} * config.status: (autoconf)config.status Invocation. Recreating configurations. * testsuite: (autoconf)testsuite Invocation. Running an Autotest test suite. @end direntry @titlepage @title Autoconf @subtitle Creating Automatic Configuration Scripts @subtitle for version @value{VERSION}, @value{UPDATED} @author David MacKenzie @author Ben Elliston @author Akim Demaille @page @vskip 0pt plus 1filll @insertcopying @end titlepage @contents @ifnottex @node Top @top Autoconf @insertcopying @end ifnottex @c The master menu, created with texinfo-master-menu, goes here. @menu * Introduction:: Autoconf's purpose, strengths, and weaknesses * The GNU Build System:: A set of tools for portable software packages * Making configure Scripts:: How to organize and produce Autoconf scripts * Setup:: Initialization and output * Existing Tests:: Macros that check for particular features * Writing Tests:: How to write new feature checks * Results:: What to do with results from feature checks * Programming in M4:: Layers on top of which Autoconf is written * Programming in M4sh:: Shell portability layer * Writing Autoconf Macros:: Adding new macros to Autoconf * Portable Shell:: Shell script portability pitfalls * Portable Make:: Makefile portability pitfalls * Portable C and C++:: C and C++ portability pitfalls * Manual Configuration:: Selecting features that can't be guessed * Site Configuration:: Local defaults for @command{configure} * Running configure Scripts:: How to use the Autoconf output * config.status Invocation:: Recreating a configuration * Obsolete Constructs:: Kept for backward compatibility * Using Autotest:: Creating portable test suites * FAQ:: Frequent Autoconf Questions, with answers * History:: History of Autoconf * GNU Free Documentation License:: License for copying this manual * Indices:: Indices of symbols, concepts, etc. @detailmenu --- The Detailed Node Listing --- The GNU Build System * Automake:: Escaping makefile hell * Gnulib:: The GNU portability library * Libtool:: Building libraries portably * Pointers:: More info on the GNU build system Making @command{configure} Scripts * Writing Autoconf Input:: What to put in an Autoconf input file * autoscan Invocation:: Semi-automatic @file{configure.ac} writing * ifnames Invocation:: Listing the conditionals in source code * autoconf Invocation:: How to create configuration scripts * autoreconf Invocation:: Remaking multiple @command{configure} scripts Writing @file{configure.ac} * Shell Script Compiler:: Autoconf as solution of a problem * Autoconf Language:: Programming in Autoconf * Autoconf Input Layout:: Standard organization of @file{configure.ac} Initialization and Output Files * Initializing configure:: Option processing etc. * Versioning:: Dealing with Autoconf versions * Notices:: Copyright, version numbers in @command{configure} * Input:: Where Autoconf should find files * Output:: Outputting results from the configuration * Configuration Actions:: Preparing the output based on results * Configuration Files:: Creating output files * Makefile Substitutions:: Using output variables in makefiles * Configuration Headers:: Creating a configuration header file * Configuration Commands:: Running arbitrary instantiation commands * Configuration Links:: Links depending on the configuration * Subdirectories:: Configuring independent packages together * Default Prefix:: Changing the default installation prefix Substitutions in Makefiles * Preset Output Variables:: Output variables that are always set * Installation Directory Variables:: Other preset output variables * Changed Directory Variables:: Warnings about @file{datarootdir} * Build Directories:: Supporting multiple concurrent compiles * Automatic Remaking:: Makefile rules for configuring Configuration Header Files * Header Templates:: Input for the configuration headers * autoheader Invocation:: How to create configuration templates * Autoheader Macros:: How to specify CPP templates Existing Tests * Common Behavior:: Macros' standard schemes * Alternative Programs:: Selecting between alternative programs * Files:: Checking for the existence of files * Libraries:: Library archives that might be missing * Library Functions:: C library functions that might be missing * Header Files:: Header files that might be missing * Declarations:: Declarations that may be missing * Structures:: Structures or members that might be missing * Types:: Types that might be missing * Compilers and Preprocessors:: Checking for compiling programs * System Services:: Operating system services * C and Posix Variants:: Kludges for C and Posix variants * Erlang Libraries:: Checking for the existence of Erlang libraries Common Behavior * Standard Symbols:: Symbols defined by the macros * Default Includes:: Includes used by the generic macros Alternative Programs * Particular Programs:: Special handling to find certain programs * Generic Programs:: How to find other programs Library Functions * Function Portability:: Pitfalls with usual functions * Particular Functions:: Special handling to find certain functions * Generic Functions:: How to find other functions Header Files * Header Portability:: Collected knowledge on common headers * Particular Headers:: Special handling to find certain headers * Generic Headers:: How to find other headers Declarations * Particular Declarations:: Macros to check for certain declarations * Generic Declarations:: How to find other declarations Structures * Particular Structures:: Macros to check for certain structure members * Generic Structures:: How to find other structure members Types * Particular Types:: Special handling to find certain types * Generic Types:: How to find other types Compilers and Preprocessors * Specific Compiler Characteristics:: Some portability issues * Generic Compiler Characteristics:: Language independent tests and features * C Compiler:: Checking its characteristics * C++ Compiler:: Likewise * Objective C Compiler:: Likewise * Objective C++ Compiler:: Likewise * Erlang Compiler and Interpreter:: Likewise * Fortran Compiler:: Likewise * Go Compiler:: Likewise Writing Tests * Language Choice:: Selecting which language to use for testing * Writing Test Programs:: Forging source files for compilers * Running the Preprocessor:: Detecting preprocessor symbols * Running the Compiler:: Detecting language or header features * Running the Linker:: Detecting library features * Runtime:: Testing for runtime features * Systemology:: A zoology of operating systems * Multiple Cases:: Tests for several possible values Writing Test Programs * Guidelines:: General rules for writing test programs * Test Functions:: Avoiding pitfalls in test programs * Generating Sources:: Source program boilerplate Results of Tests * Defining Symbols:: Defining C preprocessor symbols * Setting Output Variables:: Replacing variables in output files * Special Chars in Variables:: Characters to beware of in variables * Caching Results:: Speeding up subsequent @command{configure} runs * Printing Messages:: Notifying @command{configure} users Caching Results * Cache Variable Names:: Shell variables used in caches * Cache Files:: Files @command{configure} uses for caching * Cache Checkpointing:: Loading and saving the cache file Programming in M4 * M4 Quotation:: Protecting macros from unwanted expansion * Using autom4te:: The Autoconf executables backbone * Programming in M4sugar:: Convenient pure M4 macros * Debugging via autom4te:: Figuring out what M4 was doing M4 Quotation * Active Characters:: Characters that change the behavior of M4 * One Macro Call:: Quotation and one macro call * Quoting and Parameters:: M4 vs. shell parameters * Quotation and Nested Macros:: Macros calling macros * Changequote is Evil:: Worse than INTERCAL: M4 + changequote * Quadrigraphs:: Another way to escape special characters * Balancing Parentheses:: Dealing with unbalanced parentheses * Quotation Rule Of Thumb:: One parenthesis, one quote Using @command{autom4te} * autom4te Invocation:: A GNU M4 wrapper * Customizing autom4te:: Customizing the Autoconf package Programming in M4sugar * Redefined M4 Macros:: M4 builtins changed in M4sugar * Diagnostic Macros:: Diagnostic messages from M4sugar * Diversion support:: Diversions in M4sugar * Conditional constructs:: Conditions in M4 * Looping constructs:: Iteration in M4 * Evaluation Macros:: More quotation and evaluation control * Text processing Macros:: String manipulation in M4 * Number processing Macros:: Arithmetic computation in M4 * Set manipulation Macros:: Set manipulation in M4 * Forbidden Patterns:: Catching unexpanded macros Programming in M4sh * Common Shell Constructs:: Portability layer for common shell constructs * Polymorphic Variables:: Support for indirect variable names * Initialization Macros:: Macros to establish a sane shell environment * File Descriptor Macros:: File descriptor macros for input and output Writing Autoconf Macros * Macro Definitions:: Basic format of an Autoconf macro * Macro Names:: What to call your new macros * Dependencies Between Macros:: What to do when macros depend on other macros * Obsoleting Macros:: Warning about old ways of doing things * Coding Style:: Writing Autoconf macros @`a la Autoconf Dependencies Between Macros * Prerequisite Macros:: Ensuring required information * Suggested Ordering:: Warning about possible ordering problems * One-Shot Macros:: Ensuring a macro is called only once Portable Shell Programming * Shellology:: A zoology of shells * Invoking the Shell:: Invoking the shell as a command * Here-Documents:: Quirks and tricks * File Descriptors:: FDs and redirections * Signal Handling:: Shells, signals, and headaches * File System Conventions:: File names * Shell Pattern Matching:: Pattern matching * Shell Substitutions:: Variable and command expansions * Assignments:: Varying side effects of assignments * Parentheses:: Parentheses in shell scripts * Slashes:: Slashes in shell scripts * Special Shell Variables:: Variables you should not change * Shell Functions:: What to look out for if you use them * Limitations of Builtins:: Portable use of not so portable /bin/sh * Limitations of Usual Tools:: Portable use of portable tools Portable Make Programming * $< in Ordinary Make Rules:: $< in ordinary rules * Failure in Make Rules:: Failing portably in rules * Special Chars in Names:: Special Characters in Macro Names * Backslash-Newline-Empty:: Empty lines after backslash-newline * Backslash-Newline Comments:: Spanning comments across line boundaries * Long Lines in Makefiles:: Line length limitations * Macros and Submakes:: @code{make macro=value} and submakes * The Make Macro MAKEFLAGS:: @code{$(MAKEFLAGS)} portability issues * The Make Macro SHELL:: @code{$(SHELL)} portability issues * Parallel Make:: Parallel @command{make} quirks * Comments in Make Rules:: Other problems with Make comments * Newlines in Make Rules:: Using literal newlines in rules * Comments in Make Macros:: Other problems with Make comments in macros * Trailing whitespace in Make Macros:: Macro substitution problems * Command-line Macros and whitespace:: Whitespace trimming of values * obj/ and Make:: Don't name a subdirectory @file{obj} * make -k Status:: Exit status of @samp{make -k} * VPATH and Make:: @code{VPATH} woes * Single Suffix Rules:: Single suffix rules and separated dependencies * Timestamps and Make:: Sub-second timestamp resolution @code{VPATH} and Make * Variables listed in VPATH:: @code{VPATH} must be literal on ancient hosts * VPATH and Double-colon:: Problems with @samp{::} on ancient hosts * $< in Explicit Rules:: @code{$<} does not work in ordinary rules * Automatic Rule Rewriting:: @code{VPATH} goes wild on Solaris * Tru64 Directory Magic:: @command{mkdir} goes wild on Tru64 * Make Target Lookup:: More details about @code{VPATH} lookup Portable C and C++ Programming * Varieties of Unportability:: How to make your programs unportable * Integer Overflow:: When integers get too large * Preprocessor Arithmetic:: @code{#if} expression problems * Null Pointers:: Properties of null pointers * Buffer Overruns:: Subscript errors and the like * Volatile Objects:: @code{volatile} and signals * Floating Point Portability:: Portable floating-point arithmetic * Exiting Portably:: Exiting and the exit status Integer Overflow * Integer Overflow Basics:: Why integer overflow is a problem * Signed Overflow Examples:: Examples of code assuming wraparound * Optimization and Wraparound:: Optimizations that break uses of wraparound * Signed Overflow Advice:: Practical advice for signed overflow issues * Signed Integer Division:: @code{INT_MIN / -1} and @code{INT_MIN % -1} Manual Configuration * Specifying Target Triplets:: Specifying target triplets * Canonicalizing:: Getting the canonical system type * Using System Type:: What to do with the system type Site Configuration * Help Formatting:: Customizing @samp{configure --help} * External Software:: Working with other optional software * Package Options:: Selecting optional features * Pretty Help Strings:: Formatting help string * Option Checking:: Controlling checking of @command{configure} options * Site Details:: Configuring site details * Transforming Names:: Changing program names when installing * Site Defaults:: Giving @command{configure} local defaults Transforming Program Names When Installing * Transformation Options:: @command{configure} options to transform names * Transformation Examples:: Sample uses of transforming names * Transformation Rules:: Makefile uses of transforming names Running @command{configure} Scripts * Basic Installation:: Instructions for typical cases * Compilers and Options:: Selecting compilers and optimization * Multiple Architectures:: Compiling for multiple architectures at once * Installation Names:: Installing in different directories * Optional Features:: Selecting optional features * Particular Systems:: Particular systems * System Type:: Specifying the system type * Sharing Defaults:: Setting site-wide defaults for @command{configure} * Defining Variables:: Specifying the compiler etc. * configure Invocation:: Changing how @command{configure} runs Obsolete Constructs * Obsolete config.status Use:: Obsolete convention for @command{config.status} * acconfig Header:: Additional entries in @file{config.h.in} * autoupdate Invocation:: Automatic update of @file{configure.ac} * Obsolete Macros:: Backward compatibility macros * Autoconf 1:: Tips for upgrading your files * Autoconf 2.13:: Some fresher tips Upgrading From Version 1 * Changed File Names:: Files you might rename * Changed Makefiles:: New things to put in @file{Makefile.in} * Changed Macros:: Macro calls you might replace * Changed Results:: Changes in how to check test results * Changed Macro Writing:: Better ways to write your own macros Upgrading From Version 2.13 * Changed Quotation:: Broken code which used to work * New Macros:: Interaction with foreign macros * Hosts and Cross-Compilation:: Bugward compatibility kludges * AC_LIBOBJ vs LIBOBJS:: LIBOBJS is a forbidden token * AC_ACT_IFELSE vs AC_TRY_ACT:: A more generic scheme for testing sources Generating Test Suites with Autotest * Using an Autotest Test Suite:: Autotest and the user * Writing Testsuites:: Autotest macros * testsuite Invocation:: Running @command{testsuite} scripts * Making testsuite Scripts:: Using autom4te to create @command{testsuite} Using an Autotest Test Suite * testsuite Scripts:: The concepts of Autotest * Autotest Logs:: Their contents Frequent Autoconf Questions, with answers * Distributing:: Distributing @command{configure} scripts * Why GNU M4:: Why not use the standard M4? * Bootstrapping:: Autoconf and GNU M4 require each other? * Why Not Imake:: Why GNU uses @command{configure} instead of Imake * Defining Directories:: Passing @code{datadir} to program * Autom4te Cache:: What is it? Can I remove it? * Present But Cannot Be Compiled:: Compiler and Preprocessor Disagree * Expanded Before Required:: Expanded Before Required * Debugging:: Debugging @command{configure} scripts History of Autoconf * Genesis:: Prehistory and naming of @command{configure} * Exodus:: The plagues of M4 and Perl * Leviticus:: The priestly code of portability arrives * Numbers:: Growth and contributors * Deuteronomy:: Approaching the promises of easy configuration Indices * Environment Variable Index:: Index of environment variables used * Output Variable Index:: Index of variables set in output files * Preprocessor Symbol Index:: Index of C preprocessor symbols defined * Cache Variable Index:: Index of documented cache variables * Autoconf Macro Index:: Index of Autoconf macros * M4 Macro Index:: Index of M4, M4sugar, and M4sh macros * Autotest Macro Index:: Index of Autotest macros * Program & Function Index:: Index of those with portability problems * Concept Index:: General index @end detailmenu @end menu @c ============================================================= Introduction. @node Introduction @chapter Introduction @cindex Introduction @flushright A physicist, an engineer, and a computer scientist were discussing the nature of God. ``Surely a Physicist,'' said the physicist, ``because early in the Creation, God made Light; and you know, Maxwell's equations, the dual nature of electromagnetic waves, the relativistic consequences@enddots{}'' ``An Engineer!,'' said the engineer, ``because before making Light, God split the Chaos into Land and Water; it takes a hell of an engineer to handle that big amount of mud, and orderly separation of solids from liquids@enddots{}'' The computer scientist shouted: ``And the Chaos, where do you think it was coming from, hmm?'' ---Anonymous @end flushright @c (via Franc,ois Pinard) Autoconf is a tool for producing shell scripts that automatically configure software source code packages to adapt to many kinds of Posix-like systems. The configuration scripts produced by Autoconf are independent of Autoconf when they are run, so their users do not need to have Autoconf. The configuration scripts produced by Autoconf require no manual user intervention when run; they do not normally even need an argument specifying the system type. Instead, they individually test for the presence of each feature that the software package they are for might need. (Before each check, they print a one-line message stating what they are checking for, so the user doesn't get too bored while waiting for the script to finish.) As a result, they deal well with systems that are hybrids or customized from the more common Posix variants. There is no need to maintain files that list the features supported by each release of each variant of Posix. For each software package that Autoconf is used with, it creates a configuration script from a template file that lists the system features that the package needs or can use. After the shell code to recognize and respond to a system feature has been written, Autoconf allows it to be shared by many software packages that can use (or need) that feature. If it later turns out that the shell code needs adjustment for some reason, it needs to be changed in only one place; all of the configuration scripts can be regenerated automatically to take advantage of the updated code. @c "Those who do not understand Unix are condemned to reinvent it, poorly." @c --Henry Spencer, 1987 (see https://en.wikipedia.org/wiki/Unix_philosophy) Those who do not understand Autoconf are condemned to reinvent it, poorly. The primary goal of Autoconf is making the @emph{user's} life easier; making the @emph{maintainer's} life easier is only a secondary goal. Put another way, the primary goal is not to make the generation of @file{configure} automatic for package maintainers (although patches along that front are welcome, since package maintainers form the user base of Autoconf); rather, the goal is to make @file{configure} painless, portable, and predictable for the end user of each @dfn{autoconfiscated} package. And to this degree, Autoconf is highly successful at its goal---most complaints to the Autoconf list are about difficulties in writing Autoconf input, and not in the behavior of the resulting @file{configure}. Even packages that don't use Autoconf will generally provide a @file{configure} script, and the most common complaint about these alternative home-grown scripts is that they fail to meet one or more of the GNU Coding Standards (@pxref{Configuration, , , standards, The GNU Coding Standards}) that users have come to expect from Autoconf-generated @file{configure} scripts. The Metaconfig package is similar in purpose to Autoconf, but the scripts it produces require manual user intervention, which is quite inconvenient when configuring large source trees. Unlike Metaconfig scripts, Autoconf scripts can support cross-compiling, if some care is taken in writing them. Autoconf does not solve all problems related to making portable software packages---for a more complete solution, it should be used in concert with other GNU build tools like Automake and Libtool. These other tools take on jobs like the creation of a portable, recursive makefile with all of the standard targets, linking of shared libraries, and so on. @xref{The GNU Build System}, for more information. Autoconf imposes some restrictions on the names of macros used with @code{#if} in C programs (@pxref{Preprocessor Symbol Index}). Autoconf requires GNU M4 version 1.4.6 or later in order to generate the scripts. It uses features that some versions of M4, including GNU M4 1.3, do not have. Autoconf works better with GNU M4 version 1.4.14 or later, though this is not required. @xref{Autoconf 1}, for information about upgrading from version 1. @xref{History}, for the story of Autoconf's development. @xref{FAQ}, for answers to some common questions about Autoconf. See the @uref{https://@/www.gnu.org/@/software/@/autoconf/, Autoconf web page} for up-to-date information, details on the mailing lists, pointers to a list of known bugs, etc. Mail suggestions to @email{autoconf@@gnu.org, the Autoconf mailing list}. Past suggestions are @uref{https://@/lists.gnu.org/@/archive/@/html/@/autoconf/, archived}. Mail bug reports to @email{bug-autoconf@@gnu.org, the Autoconf Bugs mailing list}. Past bug reports are @uref{https://@/lists.gnu.org/@/archive/@/html/@/bug-autoconf/, archived}. If possible, first check that your bug is not already solved in current development versions, and that it has not been reported yet. Be sure to include all the needed information and a short @file{configure.ac} that demonstrates the problem. Autoconf's development tree is accessible via @command{git}; see the @uref{https://@/savannah.gnu.org/@/projects/@/autoconf/, Autoconf Summary} for details, or view @uref{https://@/git.sv.gnu.org/@/gitweb/@/?p=autoconf.git, the actual repository}. Anonymous CVS access is also available, see @file{README} for more details. Patches relative to the current @command{git} version can be sent for review to the @email{autoconf-patches@@gnu.org, Autoconf Patches mailing list}, with discussion on prior patches @uref{https://@/lists.gnu.org/@/archive/@/html/@/autoconf-@/patches/, archived}; and all commits are posted in the read-only @email{autoconf-commit@@gnu.org, Autoconf Commit mailing list}, which is also @uref{https://@/lists.gnu.org/@/archive/@/html/@/autoconf-commit/, archived}. Because of its mission, the Autoconf package itself includes only a set of often-used macros that have already demonstrated their usefulness. Nevertheless, if you wish to share your macros, or find existing ones, see the @uref{https://@/www.gnu.org/@/software/@/autoconf-archive/, Autoconf Macro Archive}, which is kindly run by @email{simons@@cryp.to, Peter Simons}. @c ================================================= The GNU Build System @node The GNU Build System @chapter The GNU Build System @cindex GNU build system Autoconf solves an important problem---reliable discovery of system-specific build and runtime information---but this is only one piece of the puzzle for the development of portable software. To this end, the GNU project has developed a suite of integrated utilities to finish the job Autoconf started: the GNU build system, whose most important components are Autoconf, Automake, and Libtool. In this chapter, we introduce you to those tools, point you to sources of more information, and try to convince you to use the entire GNU build system for your software. @menu * Automake:: Escaping makefile hell * Gnulib:: The GNU portability library * Libtool:: Building libraries portably * Pointers:: More info on the GNU build system @end menu @node Automake @section Automake The ubiquity of @command{make} means that a makefile is almost the only viable way to distribute automatic build rules for software, but one quickly runs into its numerous limitations. Its lack of support for automatic dependency tracking, recursive builds in subdirectories, reliable timestamps (e.g., for network file systems), and so on, mean that developers must painfully (and often incorrectly) reinvent the wheel for each project. Portability is non-trivial, thanks to the quirks of @command{make} on many systems. On top of all this is the manual labor required to implement the many standard targets that users have come to expect (@code{make install}, @code{make distclean}, @code{make uninstall}, etc.). Since you are, of course, using Autoconf, you also have to insert repetitive code in your @file{Makefile.in} to recognize @code{@@CC@@}, @code{@@CFLAGS@@}, and other substitutions provided by @command{configure}. Into this mess steps @dfn{Automake}. @cindex Automake Automake allows you to specify your build needs in a @file{Makefile.am} file with a vastly simpler and more powerful syntax than that of a plain makefile, and then generates a portable @file{Makefile.in} for use with Autoconf. For example, the @file{Makefile.am} to build and install a simple ``Hello world'' program might look like: @example bin_PROGRAMS = hello hello_SOURCES = hello.c @end example @noindent The resulting @file{Makefile.in} (~400 lines) automatically supports all the standard targets, the substitutions provided by Autoconf, automatic dependency tracking, @code{VPATH} building, and so on. @command{make} builds the @code{hello} program, and @code{make install} installs it in @file{/usr/local/bin} (or whatever prefix was given to @command{configure}, if not @file{/usr/local}). The benefits of Automake increase for larger packages (especially ones with subdirectories), but even for small programs the added convenience and portability can be substantial. And that's not all@enddots{} @node Gnulib @section Gnulib GNU software has a well-deserved reputation for running on many different types of systems. While our primary goal is to write software for the GNU system, many users and developers have been introduced to us through the systems that they were already using. @cindex Gnulib Gnulib is a central location for common GNU code, intended to be shared among free software packages. Its components are typically shared at the source level, rather than being a library that gets built, installed, and linked against. The idea is to copy files from Gnulib into your own source tree. There is no distribution tarball; developers should just grab source modules from the repository. The source files are available online, under various licenses, mostly GNU GPL or GNU LGPL. Gnulib modules typically contain C source code along with Autoconf macros used to configure the source code. For example, the Gnulib @code{stdalign} module implements a @file{stdalign.h} header that nearly conforms to C11, even on old-fashioned hosts that lack @file{stdalign.h}. This module contains a source file for the replacement header, along with an Autoconf macro that arranges to use the replacement header on old-fashioned systems. @node Libtool @section Libtool Often, one wants to build not only programs, but libraries, so that other programs can benefit from the fruits of your labor. Ideally, one would like to produce @emph{shared} (dynamically linked) libraries, which can be used by multiple programs without duplication on disk or in memory and can be updated independently of the linked programs. Producing shared libraries portably, however, is the stuff of nightmares---each system has its own incompatible tools, compiler flags, and magic incantations. Fortunately, GNU provides a solution: @dfn{Libtool}. @cindex Libtool Libtool handles all the requirements of building shared libraries for you, and at this time seems to be the @emph{only} way to do so with any portability. It also handles many other headaches, such as: the interaction of Make rules with the variable suffixes of shared libraries, linking reliably with shared libraries before they are installed by the superuser, and supplying a consistent versioning system (so that different versions of a library can be installed or upgraded without breaking binary compatibility). Although Libtool, like Autoconf, can be used without Automake, it is most simply utilized in conjunction with Automake---there, Libtool is used automatically whenever shared libraries are needed, and you need not know its syntax. @node Pointers @section Pointers Developers who are used to the simplicity of @command{make} for small projects on a single system might be daunted at the prospect of learning to use Automake and Autoconf. As your software is distributed to more and more users, however, you otherwise quickly find yourself putting lots of effort into reinventing the services that the GNU build tools provide, and making the same mistakes that they once made and overcame. (Besides, since you're already learning Autoconf, Automake is a piece of cake.) There are a number of places that you can go to for more information on the GNU build tools. @itemize @minus @item Web The project home pages for @uref{https://@/www@/.gnu@/.org/@/software/@/autoconf/, Autoconf}, @uref{https://@/www@/.gnu@/.org/@/software/@/automake/, Automake}, @uref{https://@/www@/.gnu@/.org/@/software/@/gnulib/, Gnulib}, and @uref{https://@/www@/.gnu@/.org/@/software/@/libtool/, Libtool}. @item Automake Manual @xref{Top, , Automake, automake, GNU Automake}, for more information on Automake. @item Books The book @cite{GNU Autoconf, Automake and Libtool}@footnote{@cite{GNU Autoconf, Automake and Libtool}, by G. V. Vaughan, B. Elliston, T. Tromey, and I. L. Taylor. SAMS (originally New Riders), 2000, ISBN 1578701902.} describes the complete GNU build environment. You can also find @uref{https://@/www.sourceware.org/@/autobook/, the entire book on-line}. @end itemize @c ================================================= Making configure Scripts. @node Making configure Scripts @chapter Making @command{configure} Scripts @cindex @file{aclocal.m4} @cindex @command{configure} The configuration scripts that Autoconf produces are by convention called @command{configure}. When run, @command{configure} creates several files, replacing configuration parameters in them with appropriate values. The files that @command{configure} creates are: @itemize @minus @item one or more @file{Makefile} files, usually one in each subdirectory of the package (@pxref{Makefile Substitutions}); @item optionally, a C header file, the name of which is configurable, containing @code{#define} directives (@pxref{Configuration Headers}); @item a shell script called @file{config.status} that, when run, recreates the files listed above (@pxref{config.status Invocation}); @item an optional shell script normally called @file{config.cache} (created when using @samp{configure --config-cache}) that saves the results of running many of the tests (@pxref{Cache Files}); @item a file called @file{config.log} containing any messages produced by compilers, to help debugging if @command{configure} makes a mistake. @end itemize @cindex @file{configure.ac} To create a @command{configure} script with Autoconf, you need to write an Autoconf input file @file{configure.ac} and run @command{autoconf} on it. If you write your own feature tests to supplement those that come with Autoconf, you might also write files called @file{aclocal.m4} and @file{acsite.m4}. If you use a C header file to contain @code{#define} directives, you might also run @command{autoheader}, and you can distribute the generated file @file{config.h.in} with the package. Here is a diagram showing how the files that can be used in configuration are produced. Programs that are executed are suffixed by @samp{*}. Optional files are enclosed in square brackets (@samp{[]}). @command{autoconf} and @command{autoheader} also read the installed Autoconf macro files (by reading @file{autoconf.m4}). @noindent Files used in preparing a software package for distribution, when using just Autoconf: @example your source files --> [autoscan*] --> [configure.scan] --> configure.ac @group configure.ac --. | .------> autoconf* -----> configure [aclocal.m4] --+---+ | `-----> [autoheader*] --> [config.h.in] [acsite.m4] ---' @end group Makefile.in @end example @noindent Additionally, if you use Automake, the following additional productions come into play: @example @group [acinclude.m4] --. | [local macros] --+--> aclocal* --> aclocal.m4 | configure.ac ----' @end group @group configure.ac --. +--> automake* --> Makefile.in Makefile.am ---' @end group @end example @noindent Files used in configuring a software package: @example @group .-------------> [config.cache] configure* ------------+-------------> config.log | [config.h.in] -. v .-> [config.h] -. +--> config.status* -+ +--> make* Makefile.in ---' `-> Makefile ---' @end group @end example @menu * Writing Autoconf Input:: What to put in an Autoconf input file * autoscan Invocation:: Semi-automatic @file{configure.ac} writing * ifnames Invocation:: Listing the conditionals in source code * autoconf Invocation:: How to create configuration scripts * autoreconf Invocation:: Remaking multiple @command{configure} scripts @end menu @node Writing Autoconf Input @section Writing @file{configure.ac} To produce a @command{configure} script for a software package, create a file called @file{configure.ac} that contains invocations of the Autoconf macros that test the system features your package needs or can use. Autoconf macros already exist to check for many features; see @ref{Existing Tests}, for their descriptions. For most other features, you can use Autoconf template macros to produce custom checks; see @ref{Writing Tests}, for information about them. For especially tricky or specialized features, @file{configure.ac} might need to contain some hand-crafted shell commands; see @ref{Portable Shell, , Portable Shell Programming}. The @command{autoscan} program can give you a good start in writing @file{configure.ac} (@pxref{autoscan Invocation}, for more information). @cindex @file{configure.in} Previous versions of Autoconf promoted the name @file{configure.in}, which is somewhat ambiguous (the tool needed to process this file is not described by its extension), and introduces a slight confusion with @file{config.h.in} and so on (for which @samp{.in} means ``to be processed by @command{configure}''). Using @file{configure.ac} is now preferred, while the use of @file{configure.in} will cause warnings from @command{autoconf}. @menu * Shell Script Compiler:: Autoconf as solution of a problem * Autoconf Language:: Programming in Autoconf * Autoconf Input Layout:: Standard organization of @file{configure.ac} @end menu @node Shell Script Compiler @subsection A Shell Script Compiler Just as for any other computer language, in order to properly program @file{configure.ac} in Autoconf you must understand @emph{what} problem the language tries to address and @emph{how} it does so. The problem Autoconf addresses is that the world is a mess. After all, you are using Autoconf in order to have your package compile easily on all sorts of different systems, some of them being extremely hostile. Autoconf itself bears the price for these differences: @command{configure} must run on all those systems, and thus @command{configure} must limit itself to their lowest common denominator of features. Naturally, you might then think of shell scripts; who needs @command{autoconf}? A set of properly written shell functions is enough to make it easy to write @command{configure} scripts by hand. Sigh! Unfortunately, even in 2008, where shells without any function support are far and few between, there are pitfalls to avoid when making use of them. Also, finding a Bourne shell that accepts shell functions is not trivial, even though there is almost always one on interesting porting targets. So, what is really needed is some kind of compiler, @command{autoconf}, that takes an Autoconf program, @file{configure.ac}, and transforms it into a portable shell script, @command{configure}. How does @command{autoconf} perform this task? There are two obvious possibilities: creating a brand new language or extending an existing one. The former option is attractive: all sorts of optimizations could easily be implemented in the compiler and many rigorous checks could be performed on the Autoconf program (e.g., rejecting any non-portable construct). Alternatively, you can extend an existing language, such as the @code{sh} (Bourne shell) language. Autoconf does the latter: it is a layer on top of @code{sh}. It was therefore most convenient to implement @command{autoconf} as a macro expander: a program that repeatedly performs @dfn{macro expansions} on text input, replacing macro calls with macro bodies and producing a pure @code{sh} script in the end. Instead of implementing a dedicated Autoconf macro expander, it is natural to use an existing general-purpose macro language, such as M4, and implement the extensions as a set of M4 macros. @node Autoconf Language @subsection The Autoconf Language @cindex quotation The Autoconf language differs from many other computer languages because it treats actual code the same as plain text. Whereas in C, for instance, data and instructions have different syntactic status, in Autoconf their status is rigorously the same. Therefore, we need a means to distinguish literal strings from text to be expanded: quotation. When calling macros that take arguments, there must not be any white space between the macro name and the open parenthesis. @example AC_INIT ([oops], [1.0]) # incorrect AC_INIT([hello], [1.0]) # good @end example Arguments should be enclosed within the quote characters @samp{[} and @samp{]}, and be separated by commas. Any leading blanks or newlines in arguments are ignored, unless they are quoted. You should always quote an argument that might contain a macro name, comma, parenthesis, or a leading blank or newline. This rule applies recursively for every macro call, including macros called from other macros. For more details on quoting rules, see @ref{Programming in M4}. For instance: @example AC_CHECK_HEADER([stdio.h], [AC_DEFINE([HAVE_STDIO_H], [1], [Define to 1 if you have .])], [AC_MSG_ERROR([sorry, can't do anything for you])]) @end example @noindent is quoted properly. You may safely simplify its quotation to: @example AC_CHECK_HEADER([stdio.h], [AC_DEFINE([HAVE_STDIO_H], 1, [Define to 1 if you have .])], [AC_MSG_ERROR([sorry, can't do anything for you])]) @end example @noindent because @samp{1} cannot contain a macro call. Here, the argument of @code{AC_MSG_ERROR} must be quoted; otherwise, its comma would be interpreted as an argument separator. Also, the second and third arguments of @samp{AC_CHECK_HEADER} must be quoted, since they contain macro calls. The three arguments @samp{HAVE_STDIO_H}, @samp{stdio.h}, and @samp{Define to 1 if you have .} do not need quoting, but if you unwisely defined a macro with a name like @samp{Define} or @samp{stdio} then they would need quoting. Cautious Autoconf users would keep the quotes, but many Autoconf users find such precautions annoying, and would rewrite the example as follows: @example AC_CHECK_HEADER(stdio.h, [AC_DEFINE(HAVE_STDIO_H, 1, [Define to 1 if you have .])], [AC_MSG_ERROR([sorry, can't do anything for you])]) @end example @noindent This is safe, so long as you adopt good naming conventions and do not define macros with names like @samp{HAVE_STDIO_H}, @samp{stdio}, or @samp{h}. Though it is also safe here to omit the quotes around @samp{Define to 1 if you have .} this is not recommended, as message strings are more likely to inadvertently contain commas. The following example is wrong and dangerous, as it is underquoted: @example AC_CHECK_HEADER(stdio.h, AC_DEFINE(HAVE_STDIO_H, 1, Define to 1 if you have .), AC_MSG_ERROR([sorry, can't do anything for you])) @end example In other cases, you may want to use text that also resembles a macro call. You must quote that text (whether just the potential problem, or the entire line) even when it is not passed as a macro argument; and you may also have to use @code{m4_pattern_allow} (@pxref{Forbidden Patterns}), to declare your intention that the resulting configure file will have a literal that resembles what would otherwise be reserved for a macro name. For example: @example dnl Simulate a possible future autoconf macro m4_define([AC_DC], [oops]) dnl Underquoted: echo "Hard rock was here! --AC_DC" dnl Correctly quoted: m4_pattern_allow([AC_DC]) echo "Hard rock was here! --[AC_DC]" [echo "Hard rock was here! --AC_DC"] @end example @noindent which results in this text in @file{configure}: @example echo "Hard rock was here! --oops" echo "Hard rock was here! --AC_DC" echo "Hard rock was here! --AC_DC" @end example @noindent When you use the same text in a macro argument, you must therefore have an extra quotation level (since one is stripped away by the macro substitution). In general, then, it is a good idea to @emph{use double quoting for all literal string arguments}, either around just the problematic portions, or over the entire argument: @example m4_pattern_allow([AC_DC]) AC_MSG_WARN([[AC_DC] stinks --Iron Maiden]) AC_MSG_WARN([[AC_DC stinks --Iron Maiden]]) @end example It is also possible to avoid the problematic patterns in the first place, by the use of additional escaping (either a quadrigraph, or creative shell constructs), in which case it is no longer necessary to use @code{m4_pattern_allow}: @example echo "Hard rock was here! --AC""_DC" AC_MSG_WARN([[AC@@&t@@_DC stinks --Iron Maiden]]) @end example You are now able to understand one of the constructs of Autoconf that has been continually misunderstood@enddots{} The rule of thumb is that @emph{whenever you expect macro expansion, expect quote expansion}; i.e., expect one level of quotes to be lost. For instance: @example AC_COMPILE_IFELSE(AC_LANG_SOURCE([char b[10];]), [], [AC_MSG_ERROR([you lose])]) @end example @noindent is incorrect: here, the first argument of @code{AC_LANG_SOURCE} is @samp{char b[10];} and is expanded once, which results in @samp{char b10;}; and the @code{AC_LANG_SOURCE} is also expanded prior to being passed to @code{AC_COMPILE_IFELSE}. (There was an idiom common in Autoconf's past to address this issue via the M4 @code{changequote} primitive, but do not use it!) Let's take a closer look: the author meant the first argument to be understood as a literal, and therefore it must be quoted twice; likewise, the intermediate @code{AC_LANG_SOURCE} macro should be quoted once so that it is only expanded after the rest of the body of @code{AC_COMPILE_IFELSE} is in place: @example AC_COMPILE_IFELSE([AC_LANG_SOURCE([[char b[10];]])], [], [AC_MSG_ERROR([you lose])]) @end example @noindent Voil@`a, you actually produce @samp{char b[10];} this time! On the other hand, descriptions (e.g., the last parameter of @code{AC_DEFINE} or @code{AS_HELP_STRING}) are not literals---they are subject to line breaking, for example---and should not be double quoted. Even if these descriptions are short and are not actually broken, double quoting them yields weird results. Some macros take optional arguments, which this documentation represents as @ovar{arg} (not to be confused with the quote characters). You may just leave them empty, or use @samp{[]} to make the emptiness of the argument explicit, or you may simply omit the trailing commas. The three lines below are equivalent: @example AC_CHECK_HEADERS([stdio.h], [], [], []) AC_CHECK_HEADERS([stdio.h],,,) AC_CHECK_HEADERS([stdio.h]) @end example It is best to put each macro call on its own line in @file{configure.ac}. Most of the macros don't add extra newlines; they rely on the newline after the macro call to terminate the commands. This approach makes the generated @command{configure} script a little easier to read by not inserting lots of blank lines. It is generally safe to set shell variables on the same line as a macro call, because the shell allows assignments without intervening newlines. You can include comments in @file{configure.ac} files by starting them with the @samp{#}. For example, it is helpful to begin @file{configure.ac} files with a line like this: @example # Process this file with autoconf to produce a configure script. @end example @node Autoconf Input Layout @subsection Standard @file{configure.ac} Layout The order in which @file{configure.ac} calls the Autoconf macros is not important, with a few exceptions. Every @file{configure.ac} must contain a call to @code{AC_INIT} before the checks, and a call to @code{AC_OUTPUT} at the end (@pxref{Output}). Additionally, some macros rely on other macros having been called first, because they check previously set values of some variables to decide what to do. These macros are noted in the individual descriptions (@pxref{Existing Tests}), and they also warn you when @command{configure} is created if they are called out of order. To encourage consistency, here is a suggested order for calling the Autoconf macros. Generally speaking, the things near the end of this list are those that could depend on things earlier in it. For example, library functions could be affected by types and libraries. @display @group Autoconf requirements @code{AC_INIT(@var{package}, @var{version}, @var{bug-report-address})} information on the package checks for programs checks for libraries checks for header files checks for types checks for structures checks for compiler characteristics checks for library functions checks for system services @code{AC_CONFIG_FILES(@r{[}@var{file@dots{}}@r{]})} @code{AC_OUTPUT} @end group @end display @node autoscan Invocation @section Using @command{autoscan} to Create @file{configure.ac} @cindex @command{autoscan} The @command{autoscan} program can help you create and/or maintain a @file{configure.ac} file for a software package. @command{autoscan} examines source files in the directory tree rooted at a directory given as a command line argument, or the current directory if none is given. It searches the source files for common portability problems and creates a file @file{configure.scan} which is a preliminary @file{configure.ac} for that package, and checks a possibly existing @file{configure.ac} for completeness. When using @command{autoscan} to create a @file{configure.ac}, you should manually examine @file{configure.scan} before renaming it to @file{configure.ac}; it probably needs some adjustments. Occasionally, @command{autoscan} outputs a macro in the wrong order relative to another macro, so that @command{autoconf} produces a warning; you need to move such macros manually. Also, if you want the package to use a configuration header file, you must add a call to @code{AC_CONFIG_HEADERS} (@pxref{Configuration Headers}). You might also have to change or add some @code{#if} directives to your program in order to make it work with Autoconf (@pxref{ifnames Invocation}, for information about a program that can help with that job). When using @command{autoscan} to maintain a @file{configure.ac}, simply consider adding its suggestions. The file @file{autoscan.log} contains detailed information on why a macro is requested. @command{autoscan} uses several data files (installed along with Autoconf) to determine which macros to output when it finds particular symbols in a package's source files. These data files all have the same format: each line consists of a symbol, one or more blanks, and the Autoconf macro to output if that symbol is encountered. Lines starting with @samp{#} are comments. @command{autoscan} accepts the following options: @table @option @item --help @itemx -h Print a summary of the command line options and exit. @item --version @itemx -V Print the version number of Autoconf and exit. @item --verbose @itemx -v Print the names of the files it examines and the potentially interesting symbols it finds in them. This output can be voluminous. @item --debug @itemx -d Don't remove temporary files. @item --include=@var{dir} @itemx -I @var{dir} Append @var{dir} to the include path. Multiple invocations accumulate. @item --prepend-include=@var{dir} @itemx -B @var{dir} Prepend @var{dir} to the include path. Multiple invocations accumulate. @end table @node ifnames Invocation @section Using @command{ifnames} to List Conditionals @cindex @command{ifnames} @command{ifnames} can help you write @file{configure.ac} for a software package. It prints the identifiers that the package already uses in C preprocessor conditionals. If a package has already been set up to have some portability, @command{ifnames} can thus help you figure out what its @command{configure} needs to check for. It may help fill in some gaps in a @file{configure.ac} generated by @command{autoscan} (@pxref{autoscan Invocation}). @command{ifnames} scans all of the C source files named on the command line (or the standard input, if none are given) and writes to the standard output a sorted list of all the identifiers that appear in those files in @code{#if}, @code{#elif}, @code{#ifdef}, or @code{#ifndef} directives. It prints each identifier on a line, followed by a space-separated list of the files in which that identifier occurs. @noindent @command{ifnames} accepts the following options: @table @option @item --help @itemx -h Print a summary of the command line options and exit. @item --version @itemx -V Print the version number of Autoconf and exit. @end table @node autoconf Invocation @section Using @command{autoconf} to Create @command{configure} @cindex @command{autoconf} To create @command{configure} from @file{configure.ac}, run the @command{autoconf} program with no arguments. @command{autoconf} processes @file{configure.ac} with the M4 macro processor, using the Autoconf macros. If you give @command{autoconf} an argument, it reads that file instead of @file{configure.ac} and writes the configuration script to the standard output instead of to @command{configure}. If you give @command{autoconf} the argument @option{-}, it reads from the standard input instead of @file{configure.ac} and writes the configuration script to the standard output. The Autoconf macros are defined in several files. Some of the files are distributed with Autoconf; @command{autoconf} reads them first. Then it looks for the optional file @file{acsite.m4} in the directory that contains the distributed Autoconf macro files, and for the optional file @file{aclocal.m4} in the current directory. Those files can contain your site's or the package's own Autoconf macro definitions (@pxref{Writing Autoconf Macros}, for more information). If a macro is defined in more than one of the files that @command{autoconf} reads, the last definition it reads overrides the earlier ones. @command{autoconf} accepts the following options: @table @option @item --help @itemx -h Print a summary of the command line options and exit. @item --version @itemx -V Print the version number of Autoconf and exit. @item --verbose @itemx -v Report processing steps. @item --debug @itemx -d Don't remove the temporary files. @item --force @itemx -f Remake @file{configure} even if newer than its input files. @item --include=@var{dir} @itemx -I @var{dir} Append @var{dir} to the include path. Multiple invocations accumulate. @item --prepend-include=@var{dir} @itemx -B @var{dir} Prepend @var{dir} to the include path. Multiple invocations accumulate. @item --output=@var{file} @itemx -o @var{file} Save output (script or trace) to @var{file}. The file @option{-} stands for the standard output. @item --warnings=@var{category}[,@var{category}...] @itemx -W@var{category}[,@var{category}...] @evindex WARNINGS Enable or disable warnings related to each @var{category}. @xref{m4_warn}, for a comprehensive list of categories. Special values include: @table @samp @item all Enable all categories of warnings. @item none Disable all categories of warnings. @item error Treat all warnings as errors. @item no-@var{category} Disable warnings falling into @var{category}. @end table The enviroment variable @env{WARNINGS} may also be set to a comma-separated list of warning categories to enable or disable. It is interpreted exactly the same way as the argument of @option{--warnings}, but unknown categories are silently ignored. The command line takes precedence; for instance, if @env{WARNINGS} is set to @code{obsolete}, but @option{-Wnone} is given on the command line, no warnings will be issued. Some categories of warnings are on by default. Again, for details see @ref{m4_warn}. @item --trace=@var{macro}[:@var{format}] @itemx -t @var{macro}[:@var{format}] Do not create the @command{configure} script, but list the calls to @var{macro} according to the @var{format}. Multiple @option{--trace} arguments can be used to list several macros. Multiple @option{--trace} arguments for a single macro are not cumulative; instead, you should just make @var{format} as long as needed. The @var{format} is a regular string, with newlines if desired, and several special escape codes. It defaults to @samp{$f:$l:$n:$%}; see @ref{autom4te Invocation}, for details on the @var{format}. @item --initialization @itemx -i By default, @option{--trace} does not trace the initialization of the Autoconf macros (typically the @code{AC_DEFUN} definitions). This results in a noticeable speedup, but can be disabled by this option. @end table It is often necessary to check the content of a @file{configure.ac} file, but parsing it yourself is extremely fragile and error-prone. It is suggested that you rely upon @option{--trace} to scan @file{configure.ac}. For instance, to find the list of variables that are substituted, use: @example @group $ @kbd{autoconf -t AC_SUBST} configure.ac:2:AC_SUBST:ECHO_C configure.ac:2:AC_SUBST:ECHO_N configure.ac:2:AC_SUBST:ECHO_T @i{More traces deleted} @end group @end example @noindent The example below highlights the difference between @samp{$@@}, @samp{$*}, and @samp{$%}. @example @group $ @kbd{cat configure.ac} AC_DEFINE(This, is, [an [example]]) $ @kbd{autoconf -t 'AC_DEFINE:@@: $@@} *: $* %: $%' @@: [This],[is],[an [example]] *: This,is,an [example] %: This:is:an [example] @end group @end example @noindent The @var{format} gives you a lot of freedom: @example @group $ @kbd{autoconf -t 'AC_SUBST:$$ac_subst@{"$1"@} = "$f:$l";'} $ac_subst@{"ECHO_C"@} = "configure.ac:2"; $ac_subst@{"ECHO_N"@} = "configure.ac:2"; $ac_subst@{"ECHO_T"@} = "configure.ac:2"; @i{More traces deleted} @end group @end example @noindent A long @var{separator} can be used to improve the readability of complex structures, and to ease their parsing (for instance when no single character is suitable as a separator): @example @group $ @kbd{autoconf -t 'AM_MISSING_PROG:$@{|:::::|@}*'} ACLOCAL|:::::|aclocal|:::::|$missing_dir AUTOCONF|:::::|autoconf|:::::|$missing_dir AUTOMAKE|:::::|automake|:::::|$missing_dir @i{More traces deleted} @end group @end example @node autoreconf Invocation @section Using @command{autoreconf} to Update @command{configure} Scripts @cindex @command{autoreconf} Installing the various components of the GNU Build System can be tedious: running @command{autopoint} for Gettext, @command{automake} for @file{Makefile.in} etc.@: in each directory. It may be needed either because some tools such as @command{automake} have been updated on your system, or because some of the sources such as @file{configure.ac} have been updated, or finally, simply in order to install the GNU Build System in a fresh tree. @command{autoreconf} runs @command{autoconf}, @command{autoheader}, @command{aclocal}, @command{automake}, @command{libtoolize}, @command{intltoolize}, @command{gtkdocize}, and @command{autopoint} (when appropriate) repeatedly to update the GNU Build System in the specified directories and their subdirectories (@pxref{Subdirectories}). By default, it only remakes those files that are older than their sources. The environment variables @env{AUTOM4TE}, @env{AUTOCONF}, @env{AUTOHEADER}, @env{AUTOMAKE}, @env{ACLOCAL}, @env{AUTOPOINT}, @env{LIBTOOLIZE}, @env{INTLTOOLIZE}, @env{GTKDOCIZE}, @env{M4}, and @env{MAKE} may be used to override the invocation of the respective tools. If you install a new version of some tool, you can make @command{autoreconf} remake @emph{all} of the files by giving it the @option{--force} option. @xref{Automatic Remaking}, for Make rules to automatically rebuild @command{configure} scripts when their source files change. That method handles the timestamps of configuration header templates properly, but does not pass @option{--autoconf-dir=@var{dir}} or @option{--localdir=@var{dir}}. @cindex Gettext @cindex @command{autopoint} Gettext supplies the @command{autopoint} command to add translation infrastructure to a source package. If you use @command{autopoint}, your @file{configure.ac} should invoke @code{AM_GNU_GETTEXT} and one of @code{AM_GNU_GETTEXT_VERSION(@var{gettext-version})} or @code{AM_GNU_GETTEXT_REQUIRE_VERSION(@var{min-gettext-version})}. @xref{autopoint Invocation, , Invoking the @code{autopoint} Program, gettext, GNU @code{gettext} utilities}, for further details. @noindent @command{autoreconf} accepts the following options: @table @option @item --help @itemx -h Print a summary of the command line options and exit. @item --version @itemx -V Print the version number of Autoconf and exit. @item --verbose @itemx -v Print the name of each directory @command{autoreconf} examines and the commands it runs. If given two or more times, pass @option{--verbose} to subordinate tools that support it. @item --debug @itemx -d Don't remove the temporary files. @item --force @itemx -f Consider all generated and standard auxiliary files to be obsolete. This remakes even @file{configure} scripts and configuration headers that are newer than their input files (@file{configure.ac} and, if present, @file{aclocal.m4}). If deemed appropriate, this option triggers calls to @samp{automake --force-missing}. Passing both @option{--force} and @option{--install} to @command{autoreconf} will in turn undo any customizations to standard files. Note that the macro @code{AM_INIT_AUTOMAKE} has some options which change the set of files considered to be standard. @item --install @itemx -i Install any missing standard auxiliary files in the package. By default, files are copied; this can be changed with @option{--symlink}. If deemed appropriate, this option triggers calls to @samp{automake --add-missing}, @samp{libtoolize}, @samp{autopoint}, etc. @item --no-recursive Do not rebuild files in subdirectories to configure (see @ref{Subdirectories}, macro @code{AC_CONFIG_SUBDIRS}). @item --symlink @itemx -s When used with @option{--install}, install symbolic links to the missing auxiliary files instead of copying them. @item --make @itemx -m When the directories were configured, update the configuration by running @samp{./config.status --recheck && ./config.status}, and then run @samp{make}. @item --include=@var{dir} @itemx -I @var{dir} Append @var{dir} to the include path. Multiple invocations accumulate. Passed on to @command{aclocal}, @command{autoconf} and @command{autoheader} internally. @item --prepend-include=@var{dir} @itemx -B @var{dir} Prepend @var{dir} to the include path. Multiple invocations accumulate. Passed on to @command{autoconf} and @command{autoheader} internally. @item --warnings=@var{category}[,@var{category}...] @itemx -W@var{category}[,@var{category}...] @evindex WARNINGS Enable or disable warnings related to each @var{category}. @xref{m4_warn}, for a comprehensive list of categories. Special values include: @table @samp @item all Enable all categories of warnings. @item none Disable all categories of warnings. @item error Treat all warnings as errors. @item no-@var{category} Disable warnings falling into @var{category}. @end table The enviroment variable @env{WARNINGS} may also be set to a comma-separated list of warning categories to enable or disable. It is interpreted exactly the same way as the argument of @option{--warnings}, but unknown categories are silently ignored. The command line takes precedence; for instance, if @env{WARNINGS} is set to @code{obsolete}, but @option{-Wnone} is given on the command line, no warnings will be issued. Some categories of warnings are on by default. Again, for details see @ref{m4_warn}. @end table If you want @command{autoreconf} to pass flags that are not listed here on to @command{aclocal}, set @code{ACLOCAL_AMFLAGS} in your @file{Makefile.am}. Due to a limitation in the Autoconf implementation these flags currently must be set on a single line in @file{Makefile.am}, without any backslash-newlines. Also, be aware that future Automake releases might start flagging @code{ACLOCAL_AMFLAGS} as obsolescent, or even remove support for it. @c ========================================= Initialization and Output Files. @node Setup @chapter Initialization and Output Files Autoconf-generated @command{configure} scripts need some information about how to initialize, such as how to find the package's source files and about the output files to produce. The following sections describe the initialization and the creation of output files. @menu * Initializing configure:: Option processing etc. * Versioning:: Dealing with Autoconf versions * Notices:: Copyright, version numbers in @command{configure} * Input:: Where Autoconf should find files * Output:: Outputting results from the configuration * Configuration Actions:: Preparing the output based on results * Configuration Files:: Creating output files * Makefile Substitutions:: Using output variables in makefiles * Configuration Headers:: Creating a configuration header file * Configuration Commands:: Running arbitrary instantiation commands * Configuration Links:: Links depending on the configuration * Subdirectories:: Configuring independent packages together * Default Prefix:: Changing the default installation prefix @end menu @node Initializing configure @section Initializing @command{configure} Every @command{configure} script must call @code{AC_INIT} before doing anything else that produces output. Calls to silent macros, such as @code{AC_DEFUN}, may also occur prior to @code{AC_INIT}, although these are generally used via @file{aclocal.m4}, since that is implicitly included before the start of @file{configure.ac}. The only other required macro is @code{AC_OUTPUT} (@pxref{Output}). @anchor{AC_INIT} @defmac AC_INIT (@var{package}, @var{version}, @ovar{bug-report}, @ @ovar{tarname}, @ovar{url}) @acindex{INIT} Process any command-line arguments and perform initialization and verification. Set the name of the @var{package} and its @var{version}. These are typically used in @option{--version} support, including that of @command{configure}. The optional argument @var{bug-report} should be the email to which users should send bug reports. The package @var{tarname} differs from @var{package}: the latter designates the full package name (e.g., @samp{GNU Autoconf}), while the former is meant for distribution tar ball names (e.g., @samp{autoconf}). It defaults to @var{package} with @samp{GNU } stripped, lower-cased, and all characters other than alphanumerics and underscores are changed to @samp{-}. If provided, @var{url} should be the home page for the package. Leading and trailing whitespace is stripped from all the arguments to @code{AC_INIT}, and interior whitespace is collapsed to a single space. The arguments to @code{AC_INIT} may be computed by M4, when @command{autoconf} is run. For instance, it is fine for the @var{version} argument to be an invocation of @code{m4_esyscmd} that runs a command that determines the package's version from information stored in the package's version control system. However, they may not be computed by the shell, when @command{configure} is run; if they contain any construct that would cause computation by the shell, Autoconf will issue an error. This restriction is because the arguments to AC_INIT are written into @file{configure} several times, in different places, only some of which are subject to shell variable and command substitution. The @var{tarname} argument is used to construct filenames. It should not contain wildcard characters, white space, or anything else that could be troublesome as part of a file or directory name. The following M4 macros (e.g., @code{AC_PACKAGE_NAME}), output variables (e.g., @code{PACKAGE_NAME}), and preprocessor symbols (e.g., @code{PACKAGE_NAME}), are defined by @code{AC_INIT}: @table @asis @item @code{AC_PACKAGE_NAME}, @code{PACKAGE_NAME} @acindex{PACKAGE_NAME} @ovindex PACKAGE_NAME @cvindex PACKAGE_NAME Exactly @var{package}. @item @code{AC_PACKAGE_TARNAME}, @code{PACKAGE_TARNAME} @acindex{PACKAGE_TARNAME} @ovindex PACKAGE_TARNAME @cvindex PACKAGE_TARNAME Exactly @var{tarname}, possibly generated from @var{package}. @item @code{AC_PACKAGE_VERSION}, @code{PACKAGE_VERSION} @acindex{PACKAGE_VERSION} @ovindex PACKAGE_VERSION @cvindex PACKAGE_VERSION Exactly @var{version}. @item @code{AC_PACKAGE_STRING}, @code{PACKAGE_STRING} @acindex{PACKAGE_STRING} @ovindex PACKAGE_STRING @cvindex PACKAGE_STRING Exactly @samp{@var{package} @var{version}}. @item @code{AC_PACKAGE_BUGREPORT}, @code{PACKAGE_BUGREPORT} @acindex{PACKAGE_BUGREPORT} @ovindex PACKAGE_BUGREPORT @cvindex PACKAGE_BUGREPORT Exactly @var{bug-report}, if one was provided. Typically an email address, or URL to a bug management web page. @item @code{AC_PACKAGE_URL}, @code{PACKAGE_URL} @acindex{PACKAGE_URL} @ovindex PACKAGE_URL @cvindex PACKAGE_URL Exactly @var{url}, if one was provided. If @var{url} was empty, but @var{package} begins with @samp{GNU }, then this defaults to @samp{https://@/www.gnu.org/@/software/@/@var{tarname}/}, otherwise, no URL is assumed. @end table @end defmac If your @command{configure} script does its own option processing, it should inspect @samp{$@@} or @samp{$*} immediately after calling @code{AC_INIT}, because other Autoconf macros liberally use the @command{set} command to process strings, and this has the side effect of updating @samp{$@@} and @samp{$*}. However, we suggest that you use standard macros like @code{AC_ARG_ENABLE} instead of attempting to implement your own option processing. @xref{Site Configuration}. If you use the @code{AC_PACKAGE} M4 macros, beware that they may contain characters that are significant to M4. In almost all cases, you should refer to them using @code{m4_defn}. @xref{Programming in M4sugar}. @node Versioning @section Dealing with Autoconf versions @cindex Autoconf version @cindex version, Autoconf The following optional macros can be used to help choose the minimum version of Autoconf that can successfully compile a given @file{configure.ac}. @defmac AC_PREREQ (@var{version}) @acindex{PREREQ} @cindex Version Ensure that a recent enough version of Autoconf is being used. If the version of Autoconf being used to create @command{configure} is earlier than @var{version}, print an error message to the standard error output and exit with failure (exit status is 63). For example: @example AC_PREREQ([@value{VERSION}]) @end example This macro may be used before @code{AC_INIT}. @end defmac @defmac AC_AUTOCONF_VERSION @acindex{AUTOCONF_VERSION} This macro was introduced in Autoconf 2.62. It identifies the version of Autoconf that is currently parsing the input file, in a format suitable for @code{m4_version_compare} (@pxref{m4_version_compare}); in other words, for this release of Autoconf, its value is @samp{@value{VERSION}}. One potential use of this macro is for writing conditional fallbacks based on when a feature was added to Autoconf, rather than using @code{AC_PREREQ} to require the newer version of Autoconf. However, remember that the Autoconf philosophy favors feature checks over version checks. You should not expand this macro directly; use @samp{m4_defn([AC_AUTOCONF_VERSION])} instead. This is because some users might have a beta version of Autoconf installed, with arbitrary letters included in its version string. This means it is possible for the version string to contain the name of a defined macro, such that expanding @code{AC_AUTOCONF_VERSION} would trigger the expansion of that macro during rescanning, and change the version string to be different than what you intended to check. @end defmac @node Notices @section Notices in @command{configure} @cindex Notices in @command{configure} The following macros manage version numbers for @command{configure} scripts. Using them is optional. @defmac AC_COPYRIGHT (@var{copyright-notice}) @acindex{COPYRIGHT} @cindex Copyright Notice State that, in addition to the Free Software Foundation's copyright on the Autoconf macros, parts of your @command{configure} are covered by the @var{copyright-notice}. The @var{copyright-notice} shows up in both the head of @command{configure} and in @samp{configure --version}. @end defmac @defmac AC_REVISION (@var{revision-info}) @acindex{REVISION} @cindex Revision Copy revision stamp @var{revision-info} into the @command{configure} script, with any dollar signs or double-quotes removed. This macro lets you put a revision stamp from @file{configure.ac} into @command{configure} without RCS or CVS changing it when you check in @command{configure}. That way, you can determine easily which revision of @file{configure.ac} a particular @command{configure} corresponds to. For example, this line in @file{configure.ac}: @c The @w prevents RCS from changing the example in the manual. @example AC_REVISION([@w{$}Revision: 1.30 $]) @end example @noindent produces this in @command{configure}: @example #!/bin/sh # From configure.ac Revision: 1.30 @end example @end defmac @node Input @section Configure Input: Source Code, Macros, and Auxiliary Files The following macros help you manage the contents of your source tree. @anchor{AC_CONFIG_SRCDIR} @defmac AC_CONFIG_SRCDIR (@var{unique-file-in-source-dir}) @acindex{CONFIG_SRCDIR} Distinguish this package's source directory from other source directories that might happen to exist in the file system. @var{unique-file-in-source-dir} should name a file that is unique to this package. @command{configure} will verify that this file exists in @file{@var{srcdir}}, before it runs any other checks. Use of this macro is strongly recommended. It protects against people accidentally specifying the wrong directory with @option{--srcdir}. @xref{configure Invocation}, for more information. @end defmac Packages that use @command{aclocal} to generate @file{aclocal.m4} should declare where local macros can be found using @code{AC_CONFIG_MACRO_DIRS}. @defmac AC_CONFIG_MACRO_DIRS (@var{dir1} [@var{dir2} ... @var{dirN}]) @defmacx AC_CONFIG_MACRO_DIR (@var{dir}) @acindex{CONFIG_MACRO_DIRS} @acindex{CONFIG_MACRO_DIR} @acindex{CONFIG_MACRO_DIR_TRACE} Specify the given directories as the location of additional local Autoconf macros. These macros are intended for use by commands like @command{autoreconf} or @command{aclocal} that trace macro calls; they should be called directly from @file{configure.ac} so that tools that install macros for @command{aclocal} can find the macros' declarations. Tools that want to learn which directories have been selected should trace @code{AC_CONFIG_MACRO_DIR_TRACE}, which will be called once per directory. AC_CONFIG_MACRO_DIRS is the preferred form, and can be called multiple times and with multiple arguments; in such cases, directories in earlier calls are expected to be searched before directories in later calls, and directories appearing in the same call are expected to be searched in the order in which they appear in the call. For historical reasons, the macro AC_CONFIG_MACRO_DIR can also be used once, if it appears first, for tools such as older @command{libtool} that weren't prepared to handle multiple directories. For example, a usage like @smallexample AC_CONFIG_MACRO_DIR([dir1]) AC_CONFIG_MACRO_DIRS([dir2]) AC_CONFIG_MACRO_DIRS([dir3 dir4]) @end smallexample will cause the trace of AC_CONFIG_MACRO_DIR_TRACE to appear four times, and should cause the directories to be searched in this order: @samp{dir1 dir2 dir3 dir4}. Note that if you use @command{aclocal} from an Automake release prior to 1.13 to generate @file{aclocal.m4}, you must also set @code{ACLOCAL_AMFLAGS = -I @var{dir1} [-I @var{dir2} ... -I @var{dirN}]} in your top-level @file{Makefile.am}. Due to a limitation in the Autoconf implementation of @command{autoreconf}, these include directives currently must be set on a single line in @file{Makefile.am}, without any backslash-newlines. @end defmac @prindex @command{config.guess} @prindex @command{config.sub} @prindex @command{install-sh} Some Autoconf macros require auxiliary scripts. @code{AC_PROG_INSTALL} and @code{AC_PROG_@w{MKDIR_P}} (@pxref{Particular Programs}) require a fallback implementation of @command{install} called @file{install-sh}, and the @code{AC_CANONICAL} macros (@pxref{Manual Configuration}) require the system-identification scripts @file{config.sub} and @file{config.guess}. Third-party tools, such as Automake and Libtool, may require additional auxiliary scripts. By default, @command{configure} looks for these scripts next to itself, in @file{@var{srcdir}}. For convenience when working with subdirectories with their own configure scripts (@pxref{Subdirectories}), if the scripts are not in @file{@var{srcdir}} it will also look in @file{@var{srcdir}/..} and @file{@var{srcdir}/../..}. All of the scripts must be found in the same directory. If these default locations are not adequate, or simply to reduce clutter at the top level of the source tree, packages can use @code{AC_CONFIG_AUX_DIR} to declare where to look for auxiliary scripts. @defmac AC_CONFIG_AUX_DIR (@var{dir}) @acindex{CONFIG_AUX_DIR} Look for auxiliary scripts in @var{dir}. Normally, @var{dir} should be a relative path, which is taken as relative to @file{@var{srcdir}}. If @var{dir} is an absolute path or contains shell variables, however, it is used as-is. When the goal of using @code{AC_CONFIG_AUX_DIR} is to reduce clutter at the top level of the source tree, the conventional name for @var{dir} is @file{build-aux}. If you need portability to DOS variants, do not name the auxiliary directory @file{aux}. @xref{File System Conventions}. @end defmac @defmac AC_REQUIRE_AUX_FILE (@var{file}) @acindex{REQUIRE_AUX_FILE} @vrindex ac_aux_dir Declare that @var{file} is an auxiliary script needed by this configure script, and set the shell variable @code{ac_aux_dir} to the directory where it can be found. The value of @code{ac_aux_dir} is guaranteed to end with a @samp{/}. Macros that need auxiliary scripts must use this macro to register each script they need. @end defmac @command{configure} checks for all the auxiliary scripts it needs on startup, and exits with an error if any are missing. @command{autoreconf} also detects missing auxiliary scripts. When used with the @option{--install} option, @command{autoreconf} will try to add missing scripts to the directory specified by @code{AC_CONFIG_AUX_DIR}, or to the top level of the source tree if @code{AC_CONFIG_AUX_DIR} was not used. It can always do this for the scripts needed by Autoconf core macros: @file{install-sh}, @file{config.sub}, and @file{config.guess}. Many other commonly-needed scripts are installed by the third-party tools that @command{autoreconf} knows how to run, such as @file{missing} for Automake and @file{ltmain.sh} for Libtool. If you are using Automake, auxiliary scripts will automatically be included in the tarball created by @command{make dist}. If you are not using Automake you will need to arrange for auxiliary scripts to be included in tarballs yourself. Auxiliary scripts should normally @emph{not} be checked into a version control system, for the same reasons that @command{configure} shouldn't be. The scripts needed by Autoconf core macros can be found in @file{$(datadir)/autoconf/build-aux} of the Autoconf installation (@pxref{Installation Directory Variables}). @file{install-sh} can be downloaded from @url{https://git.savannah.gnu.org/cgit/automake.git/plain/lib/install-sh}. @file{config.sub} and @file{config.guess} can be downloaded from @url{https://git.savannah.gnu.org/cgit/config.git/tree/}. @node Output @section Outputting Files @cindex Outputting files Every Autoconf script, e.g., @file{configure.ac}, should finish by calling @code{AC_OUTPUT}. That is the macro that generates and runs @file{config.status}, which in turn creates the makefiles and any other files resulting from configuration. This is the only required macro besides @code{AC_INIT} (@pxref{Input}). @anchor{AC_OUTPUT} @defmac AC_OUTPUT @acindex{OUTPUT} @cindex Instantiation Generate @file{config.status} and launch it. Call this macro once, at the end of @file{configure.ac}. @file{config.status} performs all the configuration actions: all the output files (see @ref{Configuration Files}, macro @code{AC_CONFIG_FILES}), header files (see @ref{Configuration Headers}, macro @code{AC_CONFIG_HEADERS}), commands (see @ref{Configuration Commands}, macro @code{AC_CONFIG_COMMANDS}), links (see @ref{Configuration Links}, macro @code{AC_CONFIG_LINKS}), subdirectories to configure (see @ref{Subdirectories}, macro @code{AC_CONFIG_SUBDIRS}) are honored. The location of your @code{AC_OUTPUT} invocation is the exact point where configuration actions are taken: any code afterwards is executed by @command{configure} once @command{config.status} was run. If you want to bind actions to @command{config.status} itself (independently of whether @command{configure} is being run), see @ref{Configuration Commands, , Running Arbitrary Configuration Commands}. @end defmac Historically, the usage of @code{AC_OUTPUT} was somewhat different. @xref{Obsolete Macros}, for a description of the arguments that @code{AC_OUTPUT} used to support. If you run @command{make} in subdirectories, you should run it using the @command{make} variable @code{MAKE}. Most versions of @command{make} set @code{MAKE} to the name of the @command{make} program plus any options it was given. (But many do not include in it the values of any variables set on the command line, so those are not passed on automatically.) Some old versions of @command{make} do not set this variable. The following macro allows you to use it even with those versions. @anchor{AC_PROG_MAKE_SET} @defmac AC_PROG_MAKE_SET @acindex{PROG_MAKE_SET} @ovindex SET_MAKE If the Make command, @code{$MAKE} if set or else @samp{make}, predefines @code{$(MAKE)}, define output variable @code{SET_MAKE} to be empty. Otherwise, define @code{SET_MAKE} to a macro definition that sets @code{$(MAKE)}, such as @samp{MAKE=make}. Calls @code{AC_SUBST} for @code{SET_MAKE}. @end defmac If you use this macro, place a line like this in each @file{Makefile.in} that runs @command{MAKE} on other directories: @example @@SET_MAKE@@ @end example @node Configuration Actions @section Performing Configuration Actions @cindex Configuration actions @file{configure} is designed so that it appears to do everything itself, but there is actually a hidden slave: @file{config.status}. @file{configure} is in charge of examining your system, but it is @file{config.status} that actually takes the proper actions based on the results of @file{configure}. The most typical task of @file{config.status} is to @emph{instantiate} files. @acindex{CONFIG_@var{ITEMS}} This section describes the common behavior of the four standard instantiating macros: @code{AC_CONFIG_FILES}, @code{AC_CONFIG_HEADERS}, @code{AC_CONFIG_COMMANDS} and @code{AC_CONFIG_LINKS}. They all have this prototype: @c FIXME: Can't use @ovar here, Texinfo 4.0 goes lunatic and emits something @c awful. @example AC_CONFIG_@var{ITEMS}(@var{tag}@dots{}, @r{[}@var{commands}@r{]}, @r{[}@var{init-cmds}@r{]}) @end example @noindent where the arguments are: @table @var @item tag@dots{} A blank-or-newline-separated list of tags, which are typically the names of the files to instantiate. You are encouraged to use literals as @var{tags}. In particular, you should avoid @example @dots{} && my_foos="$my_foos fooo" @dots{} && my_foos="$my_foos foooo" AC_CONFIG_@var{ITEMS}([$my_foos]) @end example @noindent and use this instead: @example @dots{} && AC_CONFIG_@var{ITEMS}([fooo]) @dots{} && AC_CONFIG_@var{ITEMS}([foooo]) @end example The macros @code{AC_CONFIG_FILES} and @code{AC_CONFIG_HEADERS} use special @var{tag} values: they may have the form @samp{@var{output}} or @samp{@var{output}:@var{inputs}}. The file @var{output} is instantiated from its templates, @var{inputs} (defaulting to @samp{@var{output}.in}). @samp{AC_CONFIG_FILES([Makefile:boiler/top.mk:boiler/bot.mk])}, for example, asks for the creation of the file @file{Makefile} that contains the expansion of the output variables in the concatenation of @file{boiler/top.mk} and @file{boiler/bot.mk}. The special value @samp{-} might be used to denote the standard output when used in @var{output}, or the standard input when used in the @var{inputs}. You most probably don't need to use this in @file{configure.ac}, but it is convenient when using the command line interface of @file{./config.status}, see @ref{config.status Invocation}, for more details. The @var{inputs} may be absolute or relative file names. In the latter case they are first looked for in the build tree, and then in the source tree. Input files should be text files, and a line length below 2000 bytes should be safe. @item commands Shell commands output literally into @file{config.status}, and associated with a tag that the user can use to tell @file{config.status} which commands to run. The commands are run each time a @var{tag} request is given to @file{config.status}, typically each time the file @file{@var{tag}} is created. The variables set during the execution of @command{configure} are @emph{not} available here: you first need to set them via the @var{init-cmds}. Nonetheless the following variables are pre-computed: @table @code @item srcdir @vrindex srcdir The name of the top source directory, assuming that the working directory is the top build directory. This is what @command{configure}'s @option{--srcdir} option sets. @item ac_top_srcdir @vrindex ac_top_srcdir The name of the top source directory, assuming that the working directory is the current build directory. @item ac_top_build_prefix @vrindex ac_top_build_prefix The name of the top build directory, assuming that the working directory is the current build directory. It can be empty, or else ends with a slash, so that you may concatenate it. @item ac_srcdir @vrindex ac_srcdir The name of the corresponding source directory, assuming that the working directory is the current build directory. @item tmp @vrindex tmp The name of a temporary directory within the build tree, which you can use if you need to create additional temporary files. The directory is cleaned up when @command{config.status} is done or interrupted. Please use package-specific file name prefixes to avoid clashing with files that @command{config.status} may use internally. @end table @noindent The @dfn{current} directory refers to the directory (or pseudo-directory) containing the input part of @var{tags}. For instance, running @example AC_CONFIG_COMMANDS([deep/dir/out:in/in.in], [@dots{}], [@dots{}]) @end example @noindent with @option{--srcdir=../package} produces the following values: @example # Argument of --srcdir srcdir='../package' # Reversing deep/dir ac_top_build_prefix='../../' # Concatenation of $ac_top_build_prefix and srcdir ac_top_srcdir='../../../package' # Concatenation of $ac_top_srcdir and deep/dir ac_srcdir='../../../package/deep/dir' @end example @noindent independently of @samp{in/in.in}. @item init-cmds Shell commands output @emph{unquoted} near the beginning of @file{config.status}, and executed each time @file{config.status} runs (regardless of the tag). Because they are unquoted, for example, @samp{$var} is output as the value of @code{var}. @var{init-cmds} is typically used by @file{configure} to give @file{config.status} some variables it needs to run the @var{commands}. You should be extremely cautious in your variable names: all the @var{init-cmds} share the same name space and may overwrite each other in unpredictable ways. Sorry@enddots{} @end table All these macros can be called multiple times, with different @var{tag} values, of course! @node Configuration Files @section Creating Configuration Files @cindex Creating configuration files @cindex Configuration file creation Be sure to read the previous section, @ref{Configuration Actions}. @anchor{AC_CONFIG_FILES} @defmac AC_CONFIG_FILES (@var{file}@dots{}, @ovar{cmds}, @ovar{init-cmds}) @acindex{CONFIG_FILES} Make @code{AC_OUTPUT} create each @file{@var{file}} by copying an input file (by default @file{@var{file}.in}), substituting the output variable values. @c Before we used to have this feature, which was later rejected @c because it complicates the writing of makefiles: @c If the file would be unchanged, it is left untouched, to preserve @c timestamp. This macro is one of the instantiating macros; see @ref{Configuration Actions}. @xref{Makefile Substitutions}, for more information on using output variables. @xref{Setting Output Variables}, for more information on creating them. This macro creates the directory that the file is in if it doesn't exist. Usually, makefiles are created this way, but other files, such as @file{.gdbinit}, can be specified as well. Typical calls to @code{AC_CONFIG_FILES} look like this: @example AC_CONFIG_FILES([Makefile src/Makefile man/Makefile X/Imakefile]) AC_CONFIG_FILES([autoconf], [chmod +x autoconf]) @end example You can override an input file name by appending to @var{file} a colon-separated list of input files. Examples: @example AC_CONFIG_FILES([Makefile:boiler/top.mk:boiler/bot.mk] [lib/Makefile:boiler/lib.mk]) @end example @noindent Doing this allows you to keep your file names acceptable to DOS variants, or to prepend and/or append boilerplate to the file. The @var{file} names should not contain shell metacharacters. @xref{Special Chars in Variables}. @end defmac @node Makefile Substitutions @section Substitutions in Makefiles @cindex Substitutions in makefiles @cindex Makefile substitutions Each subdirectory in a distribution that contains something to be compiled or installed should come with a file @file{Makefile.in}, from which @command{configure} creates a file @file{Makefile} in that directory. To create @file{Makefile}, @command{configure} performs a simple variable substitution, replacing occurrences of @samp{@@@var{variable}@@} in @file{Makefile.in} with the value that @command{configure} has determined for that variable. Variables that are substituted into output files in this way are called @dfn{output variables}. They are ordinary shell variables that are set in @command{configure}. To make @command{configure} substitute a particular variable into the output files, the macro @code{AC_SUBST} must be called with that variable name as an argument. Any occurrences of @samp{@@@var{variable}@@} for other variables are left unchanged. @xref{Setting Output Variables}, for more information on creating output variables with @code{AC_SUBST}. A software package that uses a @command{configure} script should be distributed with a file @file{Makefile.in}, but no makefile; that way, the user has to properly configure the package for the local system before compiling it. @xref{Makefile Conventions, , Makefile Conventions, standards, The GNU Coding Standards}, for more information on what to put in makefiles. @menu * Preset Output Variables:: Output variables that are always set * Installation Directory Variables:: Other preset output variables * Changed Directory Variables:: Warnings about @file{datarootdir} * Build Directories:: Supporting multiple concurrent compiles * Automatic Remaking:: Makefile rules for configuring @end menu @node Preset Output Variables @subsection Preset Output Variables @cindex Output variables Some output variables are preset by the Autoconf macros. Some of the Autoconf macros set additional output variables, which are mentioned in the descriptions for those macros. @xref{Output Variable Index}, for a complete list of output variables. @xref{Installation Directory Variables}, for the list of the preset ones related to installation directories. Below are listed the other preset ones, many of which are precious variables (@pxref{Setting Output Variables}, @code{AC_ARG_VAR}). The preset variables which are available during @file{config.status} (@pxref{Configuration Actions}) may also be used during @command{configure} tests. For example, it is permissible to reference @samp{$srcdir} when constructing a list of directories to pass via the @option{-I} option during a compiler feature check. When used in this manner, coupled with the fact that @command{configure} is always run from the top build directory, it is sufficient to use just @samp{$srcdir} instead of @samp{$top_srcdir}. @c Just say no to ASCII sorting! We're humans, not computers. @c These variables are listed as they would be in a dictionary: @c actor @c Actress @c actress @defvar CFLAGS @evindex CFLAGS @ovindex CFLAGS Debugging and optimization options for the C compiler. If it is not set in the environment when @command{configure} runs, the default value is set when you call @code{AC_PROG_CC} (or empty if you don't). @command{configure} uses this variable when compiling or linking programs to test for C features. If a compiler option affects only the behavior of the preprocessor (e.g., @option{-D@var{name}}), it should be put into @code{CPPFLAGS} instead. If it affects only the linker (e.g., @option{-L@var{directory}}), it should be put into @code{LDFLAGS} instead. If it affects only the compiler proper, @code{CFLAGS} is the natural home for it. If an option affects multiple phases of the compiler, though, matters get tricky. One approach to put such options directly into @code{CC}, e.g., @code{CC='gcc -m64'}. Another is to put them into both @code{CPPFLAGS} and @code{LDFLAGS}, but not into @code{CFLAGS}. However, remember that some @file{Makefile} variables are reserved by the GNU Coding Standards for the use of the ``user''---the person building the package. For instance, @code{CFLAGS} is one such variable. Sometimes package developers are tempted to set user variables such as @code{CFLAGS} because it appears to make their job easier. However, the package itself should never set a user variable, particularly not to include switches that are required for proper compilation of the package. Since these variables are documented as being for the package builder, that person rightfully expects to be able to override any of these variables at build time. If the package developer needs to add switches without interfering with the user, the proper way to do that is to introduce an additional variable. Automake makes this easy by introducing @code{AM_CFLAGS} (@pxref{Flag Variables Ordering, , , automake, GNU Automake}), but the concept is the same even if Automake is not used. @end defvar @defvar configure_input @ovindex configure_input A comment saying that the file was generated automatically by @command{configure} and giving the name of the input file. @code{AC_OUTPUT} adds a comment line containing this variable to the top of every makefile it creates. For other files, you should reference this variable in a comment at the top of each input file. For example, an input shell script should begin like this: @example #!/bin/sh # @@configure_input@@ @end example @noindent The presence of that line also reminds people editing the file that it needs to be processed by @command{configure} in order to be used. @end defvar @defvar CPPFLAGS @evindex CPPFLAGS @ovindex CPPFLAGS Preprocessor options for the C, C++, Objective C, and Objective C++ preprocessors and compilers. If it is not set in the environment when @command{configure} runs, the default value is empty. @command{configure} uses this variable when preprocessing or compiling programs to test for C, C++, Objective C, and Objective C++ features. This variable's contents should contain options like @option{-I}, @option{-D}, and @option{-U} that affect only the behavior of the preprocessor. Please see the explanation of @code{CFLAGS} for what you can do if an option affects other phases of the compiler as well. Currently, @command{configure} always links as part of a single invocation of the compiler that also preprocesses and compiles, so it uses this variable also when linking programs. However, it is unwise to depend on this behavior because the GNU Coding Standards do not require it and many packages do not use @code{CPPFLAGS} when linking programs. @xref{Special Chars in Variables}, for limitations that @code{CPPFLAGS} might run into. @end defvar @defvar CXXFLAGS @evindex CXXFLAGS @ovindex CXXFLAGS Debugging and optimization options for the C++ compiler. It acts like @code{CFLAGS}, but for C++ instead of C. @end defvar @defvar DEFS @ovindex DEFS @option{-D} options to pass to the C compiler. If @code{AC_CONFIG_HEADERS} is called, @command{configure} replaces @samp{@@DEFS@@} with @option{-DHAVE_CONFIG_H} instead (@pxref{Configuration Headers}). This variable is not defined while @command{configure} is performing its tests, only when creating the output files. @xref{Setting Output Variables}, for how to check the results of previous tests. @end defvar @defvar ECHO_C @defvarx ECHO_N @defvarx ECHO_T @ovindex ECHO_C @ovindex ECHO_N @ovindex ECHO_T How does one suppress the trailing newline from @command{echo} for question-answer message pairs? These variables provide a way: @example echo $ECHO_N "And the winner is... $ECHO_C" sleep 100000000000 echo "$@{ECHO_T@}dead." @end example @noindent Some old and uncommon @command{echo} implementations offer no means to achieve this, in which case @code{ECHO_T} is set to tab. You might not want to use it. @end defvar @defvar ERLCFLAGS @evindex ERLCFLAGS @ovindex ERLCFLAGS Debugging and optimization options for the Erlang compiler. If it is not set in the environment when @command{configure} runs, the default value is empty. @command{configure} uses this variable when compiling programs to test for Erlang features. @end defvar @defvar FCFLAGS @evindex FCFLAGS @ovindex FCFLAGS Debugging and optimization options for the Fortran compiler. If it is not set in the environment when @command{configure} runs, the default value is set when you call @code{AC_PROG_FC} (or empty if you don't). @command{configure} uses this variable when compiling or linking programs to test for Fortran features. @end defvar @defvar FFLAGS @evindex FFLAGS @ovindex FFLAGS Debugging and optimization options for the Fortran 77 compiler. If it is not set in the environment when @command{configure} runs, the default value is set when you call @code{AC_PROG_F77} (or empty if you don't). @command{configure} uses this variable when compiling or linking programs to test for Fortran 77 features. @end defvar @defvar LDFLAGS @evindex LDFLAGS @ovindex LDFLAGS Options for the linker. If it is not set in the environment when @command{configure} runs, the default value is empty. @command{configure} uses this variable when linking programs to test for C, C++, Objective C, Objective C++, Fortran, and Go features. This variable's contents should contain options like @option{-s} and @option{-L} that affect only the behavior of the linker. Please see the explanation of @code{CFLAGS} for what you can do if an option also affects other phases of the compiler. Don't use this variable to pass library names (@option{-l}) to the linker; use @code{LIBS} instead. @end defvar @defvar LIBS @evindex LIBS @ovindex LIBS @option{-l} options to pass to the linker. The default value is empty, but some Autoconf macros may prepend extra libraries to this variable if those libraries are found and provide necessary functions, see @ref{Libraries}. @command{configure} uses this variable when linking programs to test for C, C++, Objective C, Objective C++, Fortran, and Go features. @end defvar @defvar OBJCFLAGS @evindex OBJCFLAGS @ovindex OBJCFLAGS Debugging and optimization options for the Objective C compiler. It acts like @code{CFLAGS}, but for Objective C instead of C. @end defvar @defvar OBJCXXFLAGS @evindex OBJCXXFLAGS @ovindex OBJCXXFLAGS Debugging and optimization options for the Objective C++ compiler. It acts like @code{CXXFLAGS}, but for Objective C++ instead of C++. @end defvar @defvar GOFLAGS @evindex GOFLAGS @ovindex GOFLAGS Debugging and optimization options for the Go compiler. It acts like @code{CFLAGS}, but for Go instead of C. @end defvar @defvar builddir @ovindex builddir Rigorously equal to @samp{.}. Added for symmetry only. @end defvar @defvar abs_builddir @ovindex abs_builddir Absolute name of @code{builddir}. @end defvar @defvar top_builddir @ovindex top_builddir The relative name of the top level of the current build tree. In the top-level directory, this is the same as @code{builddir}. @end defvar @defvar top_build_prefix @ovindex top_build_prefix The relative name of the top level of the current build tree with final slash if nonempty. This is the same as @code{top_builddir}, except that it contains zero or more runs of @code{../}, so it should not be appended with a slash for concatenation. This helps for @command{make} implementations that otherwise do not treat @file{./file} and @file{file} as equal in the top-level build directory. @end defvar @defvar abs_top_builddir @ovindex abs_top_builddir Absolute name of @code{top_builddir}. @end defvar @defvar srcdir @ovindex srcdir The name of the directory that contains the source code for that makefile. @end defvar @defvar abs_srcdir @ovindex abs_srcdir Absolute name of @code{srcdir}. @end defvar @defvar top_srcdir @ovindex top_srcdir The name of the top-level source code directory for the package. In the top-level directory, this is the same as @code{srcdir}. @end defvar @defvar abs_top_srcdir @ovindex abs_top_srcdir Absolute name of @code{top_srcdir}. @end defvar @node Installation Directory Variables @subsection Installation Directory Variables @cindex Installation directories @cindex Directories, installation The following variables specify the directories for package installation, see @ref{Directory Variables, , Variables for Installation Directories, standards, The GNU Coding Standards}, for more information. Each variable corresponds to an argument of @command{configure}; trailing slashes are stripped so that expressions such as @samp{$@{prefix@}/lib} expand with only one slash between directory names. See the end of this section for details on when and how to use these variables. @defvar bindir @ovindex bindir The directory for installing executables that users run. @end defvar @defvar datadir @ovindex datadir The directory for installing idiosyncratic read-only architecture-independent data. @end defvar @defvar datarootdir @ovindex datarootdir The root of the directory tree for read-only architecture-independent data files. @end defvar @defvar docdir @ovindex docdir The directory for installing documentation files (other than Info and man). @end defvar @defvar dvidir @ovindex dvidir The directory for installing documentation files in DVI format. @end defvar @defvar exec_prefix @ovindex exec_prefix The installation prefix for architecture-dependent files. By default it's the same as @code{prefix}. You should avoid installing anything directly to @code{exec_prefix}. However, the default value for directories containing architecture-dependent files should be relative to @code{exec_prefix}. @end defvar @defvar htmldir @ovindex htmldir The directory for installing HTML documentation. @end defvar @defvar includedir @ovindex includedir The directory for installing C header files. @end defvar @defvar infodir @ovindex infodir The directory for installing documentation in Info format. @end defvar @defvar libdir @ovindex libdir The directory for installing object code libraries. @end defvar @defvar libexecdir @ovindex libexecdir The directory for installing executables that other programs run. @end defvar @defvar localedir @ovindex localedir The directory for installing locale-dependent but architecture-independent data, such as message catalogs. This directory usually has a subdirectory per locale. @end defvar @defvar localstatedir @ovindex localstatedir The directory for installing modifiable single-machine data. Content in this directory typically survives a reboot. @end defvar @defvar runstatedir @ovindex runstatedir The directory for installing temporary modifiable single-machine data. Content in this directory survives as long as the process is running (such as pid files), as contrasted with @file{/tmp} that may be periodically cleaned. Conversely, this directory is typically cleaned on a reboot. By default, this is a subdirectory of @code{localstatedir}. @end defvar @defvar mandir @ovindex mandir The top-level directory for installing documentation in man format. @end defvar @defvar oldincludedir @ovindex oldincludedir The directory for installing C header files for non-GCC compilers. @end defvar @defvar pdfdir @ovindex pdfdir The directory for installing PDF documentation. @end defvar @defvar prefix @ovindex prefix The common installation prefix for all files. If @code{exec_prefix} is defined to a different value, @code{prefix} is used only for architecture-independent files. @end defvar @defvar psdir @ovindex psdir The directory for installing PostScript documentation. @end defvar @defvar sbindir @ovindex sbindir The directory for installing executables that system administrators run. @end defvar @defvar sharedstatedir @ovindex sharedstatedir The directory for installing modifiable architecture-independent data. @end defvar @defvar sysconfdir @ovindex sysconfdir The directory for installing read-only single-machine data. @end defvar Most of these variables have values that rely on @code{prefix} or @code{exec_prefix}. It is deliberate that the directory output variables keep them unexpanded: typically @samp{@@datarootdir@@} is replaced by @samp{$@{prefix@}/share}, not @samp{/usr/local/share}, and @samp{@@datadir@@} is replaced by @samp{$@{datarootdir@}}. This behavior is mandated by the GNU Coding Standards, so that when the user runs: @table @samp @item make she can still specify a different prefix from the one specified to @command{configure}, in which case, if needed, the package should hard code dependencies corresponding to the make-specified prefix. @item make install she can specify a different installation location, in which case the package @emph{must} still depend on the location which was compiled in (i.e., never recompile when @samp{make install} is run). This is an extremely important feature, as many people may decide to install all the files of a package grouped together, and then install links from the final locations to there. @end table In order to support these features, it is essential that @code{datarootdir} remains defined as @samp{$@{prefix@}/share}, so that its value can be expanded based on the current value of @code{prefix}. A corollary is that you should not use these variables except in makefiles. For instance, instead of trying to evaluate @code{datadir} in @file{configure} and hard-coding it in makefiles using e.g., @samp{AC_DEFINE_UNQUOTED([DATADIR], ["$datadir"], [Data directory.])}, you should add @option{-DDATADIR='$(datadir)'} to your makefile's definition of @code{CPPFLAGS} (@code{AM_CPPFLAGS} if you are also using Automake). Similarly, you should not rely on @code{AC_CONFIG_FILES} to replace @code{bindir} and friends in your shell scripts and other files; instead, let @command{make} manage their replacement. For instance Autoconf ships templates of its shell scripts ending with @samp{.in}, and uses a makefile snippet similar to the following to build scripts like @command{autoheader} and @command{autom4te}: @example @group edit = sed \ -e 's|@@bindir[@@]|$(bindir)|g' \ -e 's|@@pkgdatadir[@@]|$(pkgdatadir)|g' \ -e 's|@@prefix[@@]|$(prefix)|g' @end group @group autoheader autom4te: Makefile rm -f $@@ $@@.tmp srcdir=''; \ test -f ./$@@.in || srcdir=$(srcdir)/; \ $(edit) $$@{srcdir@}$@@.in >$@@.tmp @c $$ restore font-lock chmod +x $@@.tmp chmod a-w $@@.tmp mv $@@.tmp $@@ @end group @group autoheader: $(srcdir)/autoheader.in autom4te: $(srcdir)/autom4te.in @end group @end example Some details are noteworthy: @table @asis @item @samp{@@bindir[@@]} The brackets prevent @command{configure} from replacing @samp{@@bindir@@} in the Sed expression itself. Brackets are preferable to a backslash here, since Posix says @samp{\@@} is not portable. @item @samp{$(bindir)} Don't use @samp{@@bindir@@}! Use the matching makefile variable instead. @item @samp{$(pkgdatadir)} The example takes advantage of the variable @samp{$(pkgdatadir)} provided by Automake; it is equivalent to @samp{$(datadir)/$(PACKAGE)}. @item @samp{/} Don't use @samp{/} in the Sed expressions that replace file names since most likely the variables you use, such as @samp{$(bindir)}, contain @samp{/}. Use a shell metacharacter instead, such as @samp{|}. @item special characters File names, file name components, and the value of @code{VPATH} should not contain shell metacharacters or white space. @xref{Special Chars in Variables}. @item dependency on @file{Makefile} Since @code{edit} uses values that depend on the configuration specific values (@code{prefix}, etc.)@: and not only on @code{VERSION} and so forth, the output depends on @file{Makefile}, not @file{configure.ac}. @item @samp{$@@} The main rule is generic, and uses @samp{$@@} extensively to avoid the need for multiple copies of the rule. @item Separated dependencies and single suffix rules You can't use them! The above snippet cannot be (portably) rewritten as: @example autoconf autoheader: Makefile @group .in: rm -f $@@ $@@.tmp $(edit) $< >$@@.tmp chmod +x $@@.tmp mv $@@.tmp $@@ @end group @end example @xref{Single Suffix Rules}, for details. @item @samp{$(srcdir)} Be sure to specify the name of the source directory, otherwise the package won't support separated builds. @end table For the more specific installation of Erlang libraries, the following variables are defined: @defvar ERLANG_INSTALL_LIB_DIR @ovindex ERLANG_INSTALL_LIB_DIR @acindex{ERLANG_SUBST_INSTALL_LIB_DIR} The common parent directory of Erlang library installation directories. This variable is set by calling the @code{AC_ERLANG_SUBST_INSTALL_LIB_DIR} macro in @file{configure.ac}. @end defvar @defvar ERLANG_INSTALL_LIB_DIR_@var{library} @ovindex ERLANG_INSTALL_LIB_DIR_@var{library} @acindex{ERLANG_SUBST_INSTALL_LIB_SUBDIR} The installation directory for Erlang library @var{library}. This variable is set by using the @samp{AC_ERLANG_SUBST_INSTALL_LIB_SUBDIR} macro in @file{configure.ac}. @end defvar @xref{Erlang Libraries}, for details. @node Changed Directory Variables @subsection Changed Directory Variables @cindex @file{datarootdir} In Autoconf 2.60, the set of directory variables has changed, and the defaults of some variables have been adjusted (@pxref{Installation Directory Variables}) to changes in the GNU Coding Standards. Notably, @file{datadir}, @file{infodir}, and @file{mandir} are now expressed in terms of @file{datarootdir}. If you are upgrading from an earlier Autoconf version, you may need to adjust your files to ensure that the directory variables are substituted correctly (@pxref{Defining Directories}), and that a definition of @file{datarootdir} is in place. For example, in a @file{Makefile.in}, adding @example datarootdir = @@datarootdir@@ @end example @noindent is usually sufficient. If you use Automake to create @file{Makefile.in}, it will add this for you. To help with the transition, Autoconf warns about files that seem to use @code{datarootdir} without defining it. In some cases, it then expands the value of @code{$datarootdir} in substitutions of the directory variables. The following example shows such a warning: @example $ @kbd{cat configure.ac} AC_INIT AC_CONFIG_FILES([Makefile]) AC_OUTPUT $ @kbd{cat Makefile.in} prefix = @@prefix@@ datadir = @@datadir@@ $ @kbd{autoconf} $ @kbd{configure} configure: creating ./config.status config.status: creating Makefile config.status: WARNING: Makefile.in seems to ignore the --datarootdir setting $ @kbd{cat Makefile} prefix = /usr/local datadir = $@{prefix@}/share @end example Usually one can easily change the file to accommodate both older and newer Autoconf releases: @example $ @kbd{cat Makefile.in} prefix = @@prefix@@ datarootdir = @@datarootdir@@ datadir = @@datadir@@ $ @kbd{configure} configure: creating ./config.status config.status: creating Makefile $ @kbd{cat Makefile} prefix = /usr/local datarootdir = $@{prefix@}/share datadir = $@{datarootdir@} @end example @acindex{DATAROOTDIR_CHECKED} In some cases, however, the checks may not be able to detect that a suitable initialization of @code{datarootdir} is in place, or they may fail to detect that such an initialization is necessary in the output file. If, after auditing your package, there are still spurious @file{configure} warnings about @code{datarootdir}, you may add the line @example AC_DEFUN([AC_DATAROOTDIR_CHECKED]) @end example @noindent to your @file{configure.ac} to disable the warnings. This is an exception to the usual rule that you should not define a macro whose name begins with @code{AC_} (@pxref{Macro Names}). @node Build Directories @subsection Build Directories @cindex Build directories @cindex Directories, build You can support compiling a software package for several architectures simultaneously from the same copy of the source code. The object files for each architecture are kept in their own directory. To support doing this, @command{make} uses the @code{VPATH} variable to find the files that are in the source directory. GNU Make can do this. Most other recent @command{make} programs can do this as well, though they may have difficulties and it is often simpler to recommend GNU @command{make} (@pxref{VPATH and Make}). Older @command{make} programs do not support @code{VPATH}; when using them, the source code must be in the same directory as the object files. If you are using GNU Automake, the remaining details in this section are already covered for you, based on the contents of your @file{Makefile.am}. But if you are using Autoconf in isolation, then supporting @code{VPATH} requires the following in your @file{Makefile.in}: @example srcdir = @@srcdir@@ VPATH = @@srcdir@@ @end example Do not set @code{VPATH} to the value of another variable (@pxref{Variables listed in VPATH}. @command{configure} substitutes the correct value for @code{srcdir} when it produces @file{Makefile}. Do not use the @command{make} variable @code{$<}, which expands to the file name of the file in the source directory (found with @code{VPATH}), except in implicit rules. (An implicit rule is one such as @samp{.c.o}, which tells how to create a @file{.o} file from a @file{.c} file.) Some versions of @command{make} do not set @code{$<} in explicit rules; they expand it to an empty value. Instead, Make command lines should always refer to source files by prefixing them with @samp{$(srcdir)/}. It's safer to quote the source directory name, in case it contains characters that are special to the shell. Because @samp{$(srcdir)} is expanded by Make, single-quoting works and is safer than double-quoting. For example: @example time.info: time.texinfo $(MAKEINFO) '$(srcdir)/time.texinfo' @end example @node Automatic Remaking @subsection Automatic Remaking @cindex Automatic remaking @cindex Remaking automatically You can put rules like the following in the top-level @file{Makefile.in} for a package to automatically update the configuration information when you change the configuration files. This example includes all of the optional files, such as @file{aclocal.m4} and those related to configuration header files. Omit from the @file{Makefile.in} rules for any of these files that your package does not use. The @samp{$(srcdir)/} prefix is included because of limitations in the @code{VPATH} mechanism. The @file{stamp-} files are necessary because the timestamps of @file{config.h.in} and @file{config.h} are not changed if remaking them does not change their contents. This feature avoids unnecessary recompilation. You should include the file @file{stamp-h.in} in your package's distribution, so that @command{make} considers @file{config.h.in} up to date. Don't use @command{touch} (@pxref{touch, , Limitations of Usual Tools}); instead, use @command{echo} (using @command{date} would cause needless differences, hence CVS conflicts, etc.). @example @group $(srcdir)/configure: configure.ac aclocal.m4 cd '$(srcdir)' && autoconf # autoheader might not change config.h.in, so touch a stamp file. $(srcdir)/config.h.in: stamp-h.in ; $(srcdir)/stamp-h.in: configure.ac aclocal.m4 cd '$(srcdir)' && autoheader echo timestamp > '$(srcdir)/stamp-h.in' config.h: stamp-h ; stamp-h: config.h.in config.status ./config.status Makefile: Makefile.in config.status ./config.status config.status: configure ./config.status --recheck @end group @end example @noindent (Be careful if you copy these lines directly into your makefile, as you need to convert the indented lines to start with the tab character.) In addition, you should use @example AC_CONFIG_FILES([stamp-h], [echo timestamp > stamp-h]) @end example @noindent so @file{config.status} ensures that @file{config.h} is considered up to date. @xref{Output}, for more information about @code{AC_OUTPUT}. @xref{config.status Invocation}, for more examples of handling configuration-related dependencies. @node Configuration Headers @section Configuration Header Files @cindex Configuration Header @cindex @file{config.h} When a package contains more than a few tests that define C preprocessor symbols, the command lines to pass @option{-D} options to the compiler can get quite long. This causes two problems. One is that the @command{make} output is hard to visually scan for errors. More seriously, the command lines can exceed the length limits of some operating systems. As an alternative to passing @option{-D} options to the compiler, @command{configure} scripts can create a C header file containing @samp{#define} directives. The @code{AC_CONFIG_HEADERS} macro selects this kind of output. Though it can be called anywhere between @code{AC_INIT} and @code{AC_OUTPUT}, it is customary to call it right after @code{AC_INIT}. The package should @samp{#include} the configuration header file before any other header files, to prevent inconsistencies in declarations (for example, if it redefines @code{const}, or if it defines a macro like @code{_FILE_OFFSET_BITS} that affects the behavior of system headers). Note that it is okay to only include @file{config.h} from @file{.c} files; the project's @file{.h} files can rely on @file{config.h} already being included first by the corresponding @file{.c} file. To provide for VPATH builds, remember to pass the C compiler a @option{-I.} option (or @option{-I..}; whichever directory contains @file{config.h}). Even if you use @samp{#include "config.h"}, the preprocessor searches only the directory of the currently read file, i.e., the source directory, not the build directory. With the appropriate @option{-I} option, you can use @samp{#include }. Actually, it's a good habit to use it, because in the rare case when the source directory contains another @file{config.h}, the build directory should be searched first. @defmac AC_CONFIG_HEADERS (@var{header} @dots{}, @ovar{cmds}, @ovar{init-cmds}) @acindex{CONFIG_HEADERS} @cvindex HAVE_CONFIG_H This macro is one of the instantiating macros; see @ref{Configuration Actions}. Make @code{AC_OUTPUT} create the file(s) in the blank-or-newline-separated list @var{header} containing C preprocessor @code{#define} statements, and replace @samp{@@DEFS@@} in generated files with @option{-DHAVE_CONFIG_H} instead of the value of @code{DEFS}. The usual name for @var{header} is @file{config.h}; @var{header} should not contain shell metacharacters. @xref{Special Chars in Variables}. If @var{header} already exists and its contents are identical to what @code{AC_OUTPUT} would put in it, it is left alone. Doing this allows making some changes in the configuration without needlessly causing object files that depend on the header file to be recompiled. Usually the input file is named @file{@var{header}.in}; however, you can override the input file name by appending to @var{header} a colon-separated list of input files. For example, you might need to make the input file name acceptable to DOS variants: @example AC_CONFIG_HEADERS([config.h:config.hin]) @end example @end defmac @defmac AH_HEADER @ahindex{HEADER} This macro is defined as the name of the first declared config header and undefined if no config headers have been declared up to this point. A third-party macro may, for example, require use of a config header without invoking AC_CONFIG_HEADERS twice, like this: @example AC_CONFIG_COMMANDS_PRE( [m4_ifndef([AH_HEADER], [AC_CONFIG_HEADERS([config.h])])]) @end example @end defmac @xref{Configuration Actions}, for more details on @var{header}. @menu * Header Templates:: Input for the configuration headers * autoheader Invocation:: How to create configuration templates * Autoheader Macros:: How to specify CPP templates @end menu @node Header Templates @subsection Configuration Header Templates @cindex Configuration Header Template @cindex Header templates @cindex @file{config.h.in} Your distribution should contain a template file that looks as you want the final header file to look, including comments, with @code{#undef} statements which are used as hooks. For example, suppose your @file{configure.ac} makes these calls: @example AC_CONFIG_HEADERS([conf.h]) AC_CHECK_HEADERS([unistd.h]) @end example @noindent Then you could have code like the following in @file{conf.h.in}. The @file{conf.h} created by @command{configure} defines @samp{HAVE_UNISTD_H} to 1, if and only if the system has @file{unistd.h}. @example @group /* Define as 1 if you have unistd.h. */ #undef HAVE_UNISTD_H @end group @end example The format of the template file is stricter than what the C preprocessor is required to accept. A directive line should contain only whitespace, @samp{#undef}, and @samp{HAVE_UNISTD_H}. The use of @samp{#define} instead of @samp{#undef}, or of comments on the same line as @samp{#undef}, is strongly discouraged. Each hook should only be listed once. Other preprocessor lines, such as @samp{#ifdef} or @samp{#include}, are copied verbatim from the template into the generated header. Since it is a tedious task to keep a template header up to date, you may use @command{autoheader} to generate it, see @ref{autoheader Invocation}. During the instantiation of the header, each @samp{#undef} line in the template file for each symbol defined by @samp{AC_DEFINE} is changed to an appropriate @samp{#define}. If the corresponding @samp{AC_DEFINE} has not been executed during the @command{configure} run, the @samp{#undef} line is commented out. (This is important, e.g., for @samp{_POSIX_SOURCE}: on many systems, it can be implicitly defined by the compiler, and undefining it in the header would then break compilation of subsequent headers.) Currently, @emph{all} remaining @samp{#undef} lines in the header template are commented out, whether or not there was a corresponding @samp{AC_DEFINE} for the macro name; but this behavior is not guaranteed for future releases of Autoconf. Generally speaking, since you should not use @samp{#define}, and you cannot guarantee whether a @samp{#undef} directive in the header template will be converted to a @samp{#define} or commented out in the generated header file, the template file cannot be used for conditional definition effects. Consequently, if you need to use the construct @example @group #ifdef THIS # define THAT #endif @end group @end example @noindent you must place it outside of the template. If you absolutely need to hook it to the config header itself, please put the directives to a separate file, and @samp{#include} that file from the config header template. If you are using @command{autoheader}, you would probably use @samp{AH_BOTTOM} to append the @samp{#include} directive. @node autoheader Invocation @subsection Using @command{autoheader} to Create @file{config.h.in} @cindex @command{autoheader} The @command{autoheader} program can create a template file of C @samp{#define} statements for @command{configure} to use. It searches for the first invocation of @code{AC_CONFIG_HEADERS} in @file{configure} sources to determine the name of the template. (If the first call of @code{AC_CONFIG_HEADERS} specifies more than one input file name, @command{autoheader} uses the first one.) It is recommended that only one input file is used. If you want to append a boilerplate code, it is preferable to use @samp{AH_BOTTOM([#include ])}. File @file{conf_post.h} is not processed during the configuration then, which make things clearer. Analogically, @code{AH_TOP} can be used to prepend a boilerplate code. In order to do its job, @command{autoheader} needs you to document all of the symbols that you might use. Typically this is done via an @code{AC_DEFINE} or @code{AC_DEFINE_UNQUOTED} call whose first argument is a literal symbol and whose third argument describes the symbol (@pxref{Defining Symbols}). Alternatively, you can use @code{AH_TEMPLATE} (@pxref{Autoheader Macros}), or you can supply a suitable input file for a subsequent configuration header file. Symbols defined by Autoconf's builtin tests are already documented properly; you need to document only those that you define yourself. You might wonder why @command{autoheader} is needed: after all, why would @command{configure} need to ``patch'' a @file{config.h.in} to produce a @file{config.h} instead of just creating @file{config.h} from scratch? Well, when everything rocks, the answer is just that we are wasting our time maintaining @command{autoheader}: generating @file{config.h} directly is all that is needed. When things go wrong, however, you'll be thankful for the existence of @command{autoheader}. The fact that the symbols are documented is important in order to @emph{check} that @file{config.h} makes sense. The fact that there is a well-defined list of symbols that should be defined (or not) is also important for people who are porting packages to environments where @command{configure} cannot be run: they just have to @emph{fill in the blanks}. But let's come back to the point: the invocation of @command{autoheader}@dots{} If you give @command{autoheader} an argument, it uses that file instead of @file{configure.ac} and writes the header file to the standard output instead of to @file{config.h.in}. If you give @command{autoheader} an argument of @option{-}, it reads the standard input instead of @file{configure.ac} and writes the header file to the standard output. @command{autoheader} accepts the following options: @table @option @item --help @itemx -h Print a summary of the command line options and exit. @item --version @itemx -V Print the version number of Autoconf and exit. @item --verbose @itemx -v Report processing steps. @item --debug @itemx -d Don't remove the temporary files. @item --force @itemx -f Remake the template file even if newer than its input files. @item --include=@var{dir} @itemx -I @var{dir} Append @var{dir} to the include path. Multiple invocations accumulate. @item --prepend-include=@var{dir} @itemx -B @var{dir} Prepend @var{dir} to the include path. Multiple invocations accumulate. @item --warnings=@var{category}[,@var{category}...] @itemx -W@var{category}[,@var{category}...] @evindex WARNINGS Enable or disable warnings related to each @var{category}. @xref{m4_warn}, for a comprehensive list of categories. Special values include: @table @samp @item all Enable all categories of warnings. @item none Disable all categories of warnings. @item error Treat all warnings as errors. @item no-@var{category} Disable warnings falling into @var{category}. @end table The enviroment variable @env{WARNINGS} may also be set to a comma-separated list of warning categories to enable or disable. It is interpreted exactly the same way as the argument of @option{--warnings}, but unknown categories are silently ignored. The command line takes precedence; for instance, if @env{WARNINGS} is set to @code{obsolete}, but @option{-Wnone} is given on the command line, no warnings will be issued. Some categories of warnings are on by default. Again, for details see @ref{m4_warn}. @end table @node Autoheader Macros @subsection Autoheader Macros @cindex Autoheader macros @command{autoheader} scans @file{configure.ac} and figures out which C preprocessor symbols it might define. It knows how to generate templates for symbols defined by @code{AC_CHECK_HEADERS}, @code{AC_CHECK_FUNCS} etc., but if you @code{AC_DEFINE} any additional symbol, you must define a template for it. If there are missing templates, @command{autoheader} fails with an error message. The template for a @var{symbol} is created by @command{autoheader} from the @var{description} argument to an @code{AC_DEFINE}; see @ref{Defining Symbols}. For special needs, you can use the following macros. @defmac AH_TEMPLATE (@var{key}, @var{description}) @ahindex{TEMPLATE} Tell @command{autoheader} to generate a template for @var{key}. This macro generates standard templates just like @code{AC_DEFINE} when a @var{description} is given. For example: @example AH_TEMPLATE([NULL_DEVICE], [Name of the file to open to get a null file, or a data sink.]) @end example @noindent generates the following template, with the description properly justified. @example /* Name of the file to open to get a null file, or a data sink. */ #undef NULL_DEVICE @end example @end defmac @defmac AH_VERBATIM (@var{key}, @var{template}) @ahindex{VERBATIM} Tell @command{autoheader} to include the @var{template} as-is in the header template file. This @var{template} is associated with the @var{key}, which is used to sort all the different templates and guarantee their uniqueness. It should be a symbol that can be defined via @code{AC_DEFINE}. @end defmac @defmac AH_TOP (@var{text}) @ahindex{TOP} Include @var{text} at the top of the header template file. @end defmac @defmac AH_BOTTOM (@var{text}) @ahindex{BOTTOM} Include @var{text} at the bottom of the header template file. @end defmac Please note that @var{text} gets included ``verbatim'' to the template file, not to the resulting config header, so it can easily get mangled when the template is processed. There is rarely a need for something other than @example AH_BOTTOM([#include ]) @end example @node Configuration Commands @section Running Arbitrary Configuration Commands @cindex Configuration commands @cindex Commands for configuration You can execute arbitrary commands before, during, and after @file{config.status} is run. The three following macros accumulate the commands to run when they are called multiple times. @code{AC_CONFIG_COMMANDS} replaces the obsolete macro @code{AC_OUTPUT_COMMANDS}; see @ref{Obsolete Macros}, for details. @anchor{AC_CONFIG_COMMANDS} @defmac AC_CONFIG_COMMANDS (@var{tag}@dots{}, @ovar{cmds}, @ovar{init-cmds}) @acindex{CONFIG_COMMANDS} Specify additional shell commands to run at the end of @file{config.status}, and shell commands to initialize any variables from @command{configure}. Associate the commands with @var{tag}. Since typically the @var{cmds} create a file, @var{tag} should naturally be the name of that file. If needed, the directory hosting @var{tag} is created. The @var{tag} should not contain shell metacharacters. @xref{Special Chars in Variables}. This macro is one of the instantiating macros; see @ref{Configuration Actions}. Here is an unrealistic example: @example fubar=42 AC_CONFIG_COMMANDS([fubar], [echo this is extra $fubar, and so on.], [fubar=$fubar]) @end example Here is a better one: @example AC_CONFIG_COMMANDS([timestamp], [date >timestamp]) @end example @end defmac The following two macros look similar, but in fact they are not of the same breed: they are executed directly by @file{configure}, so you cannot use @file{config.status} to rerun them. @c Yet it is good to leave them here. The user sees them together and @c decides which best fits their needs. @defmac AC_CONFIG_COMMANDS_PRE (@var{cmds}) @acindex{CONFIG_COMMANDS_PRE} Execute the @var{cmds} right before creating @file{config.status}. This macro presents the last opportunity to call @code{AC_SUBST}, @code{AC_DEFINE}, or @code{AC_CONFIG_@var{ITEMS}} macros. @end defmac @defmac AC_CONFIG_COMMANDS_POST (@var{cmds}) @acindex{CONFIG_COMMANDS_POST} Execute the @var{cmds} right after creating @file{config.status}. @end defmac @node Configuration Links @section Creating Configuration Links @cindex Configuration links @cindex Links for configuration You may find it convenient to create links whose destinations depend upon results of tests. One can use @code{AC_CONFIG_COMMANDS} but the creation of relative symbolic links can be delicate when the package is built in a directory different from the source directory. @anchor{AC_CONFIG_LINKS} @defmac AC_CONFIG_LINKS (@var{dest}:@var{source}@dots{}, @ovar{cmds}, @ @ovar{init-cmds}) @acindex{CONFIG_LINKS} @cindex Links Make @code{AC_OUTPUT} link each of the existing files @var{source} to the corresponding link name @var{dest}. Makes a symbolic link if possible, otherwise a hard link if possible, otherwise a copy. The @var{dest} and @var{source} names should be relative to the top level source or build directory, and should not contain shell metacharacters. @xref{Special Chars in Variables}. This macro is one of the instantiating macros; see @ref{Configuration Actions}. For example, this call: @example AC_CONFIG_LINKS([host.h:config/$machine.h object.h:config/$obj_format.h]) @end example @noindent creates in the current directory @file{host.h} as a link to @file{@var{srcdir}/config/$machine.h}, and @file{object.h} as a link to @file{@var{srcdir}/config/$obj_format.h}. The tempting value @samp{.} for @var{dest} is invalid: it makes it impossible for @samp{config.status} to guess the links to establish. One can then run: @example ./config.status host.h object.h @end example @noindent to create the links. @end defmac @node Subdirectories @section Configuring Other Packages in Subdirectories @cindex Configure subdirectories @cindex Subdirectory configure In most situations, calling @code{AC_OUTPUT} is sufficient to produce makefiles in subdirectories. However, @command{configure} scripts that control more than one independent package can use @code{AC_CONFIG_SUBDIRS} to run @command{configure} scripts for other packages in subdirectories. @defmac AC_CONFIG_SUBDIRS (@var{dir} @dots{}) @acindex{CONFIG_SUBDIRS} @ovindex subdirs Make @code{AC_OUTPUT} run @command{configure} in each subdirectory @var{dir} in the given blank-or-newline-separated list. Each @var{dir} should be a literal, i.e., please do not use: @example @c If you change this example, adjust tests/torture.at:Non-literal AC_CONFIG_SUBDIRS. if test "x$package_foo_enabled" = xyes; then my_subdirs="$my_subdirs foo" fi AC_CONFIG_SUBDIRS([$my_subdirs]) @end example @noindent because this prevents @samp{./configure --help=recursive} from displaying the options of the package @code{foo}. Instead, you should write: @example if test "x$package_foo_enabled" = xyes; then AC_CONFIG_SUBDIRS([foo]) fi @end example If a given @var{dir} is not found at @command{configure} run time, a warning is reported; if the subdirectory is optional, write: @example if test -d "$srcdir/foo"; then AC_CONFIG_SUBDIRS([foo]) fi @end example If a given @var{dir} contains @command{configure.gnu}, it is run instead of @command{configure}. This is for packages that might use a non-Autoconf script @command{Configure}, which can't be called through a wrapper @command{configure} since it would be the same file on case-insensitive file systems. The subdirectory @command{configure} scripts are given the same command line options that were given to this @command{configure} script, with minor changes if needed, which include: @itemize @minus @item adjusting a relative name for the cache file; @item adjusting a relative name for the source directory; @item propagating the current value of @code{$prefix}, including if it was defaulted, and if the default values of the top level and of the subdirectory @file{configure} differ. @end itemize This macro also sets the output variable @code{subdirs} to the list of directories @samp{@var{dir} @dots{}}. Make rules can use this variable to determine which subdirectories to recurse into. This macro may be called multiple times. @end defmac @node Default Prefix @section Default Prefix @cindex Install prefix @cindex Prefix for install By default, @command{configure} sets the prefix for files it installs to @file{/usr/local}. The user of @command{configure} can select a different prefix using the @option{--prefix} and @option{--exec-prefix} options. There are two ways to change the default: when creating @command{configure}, and when running it. Some software packages might want to install in a directory other than @file{/usr/local} by default. To accomplish that, use the @code{AC_PREFIX_DEFAULT} macro. @defmac AC_PREFIX_DEFAULT (@var{prefix}) @acindex{PREFIX_DEFAULT} Set the default installation prefix to @var{prefix} instead of @file{/usr/local}. @end defmac It may be convenient for users to have @command{configure} guess the installation prefix from the location of a related program that they have already installed. If you wish to do that, you can call @code{AC_PREFIX_PROGRAM}. @anchor{AC_PREFIX_PROGRAM} @defmac AC_PREFIX_PROGRAM (@var{program}) @acindex{PREFIX_PROGRAM} If the user did not specify an installation prefix (using the @option{--prefix} option), guess a value for it by looking for @var{program} in @env{PATH}, the way the shell does. If @var{program} is found, set the prefix to the parent of the directory containing @var{program}, else default the prefix as described above (@file{/usr/local} or @code{AC_PREFIX_DEFAULT}). For example, if @var{program} is @code{gcc} and the @env{PATH} contains @file{/usr/local/gnu/bin/gcc}, set the prefix to @file{/usr/local/gnu}. @end defmac @c ======================================================== Existing tests @node Existing Tests @chapter Existing Tests These macros test for particular system features that packages might need or want to use. If you need to test for a kind of feature that none of these macros check for, you can probably do it by calling primitive test macros with appropriate arguments (@pxref{Writing Tests}). These tests print messages telling the user which feature they're checking for, and what they find. They cache their results for future @command{configure} runs (@pxref{Caching Results}). Some of these macros set output variables. @xref{Makefile Substitutions}, for how to get their values. The phrase ``define @var{name}'' is used below as a shorthand to mean ``define the C preprocessor symbol @var{name} to the value 1''. @xref{Defining Symbols}, for how to get those symbol definitions into your program. @menu * Common Behavior:: Macros' standard schemes * Alternative Programs:: Selecting between alternative programs * Files:: Checking for the existence of files * Libraries:: Library archives that might be missing * Library Functions:: C library functions that might be missing * Header Files:: Header files that might be missing * Declarations:: Declarations that may be missing * Structures:: Structures or members that might be missing * Types:: Types that might be missing * Compilers and Preprocessors:: Checking for compiling programs * System Services:: Operating system services * C and Posix Variants:: Kludges for C and Posix variants * Erlang Libraries:: Checking for the existence of Erlang libraries @end menu @node Common Behavior @section Common Behavior @cindex Common autoconf behavior Much effort has been expended to make Autoconf easy to learn. The most obvious way to reach this goal is simply to enforce standard interfaces and behaviors, avoiding exceptions as much as possible. Because of history and inertia, unfortunately, there are still too many exceptions in Autoconf; nevertheless, this section describes some of the common rules. @menu * Standard Symbols:: Symbols defined by the macros * Default Includes:: Includes used by the generic macros @end menu @node Standard Symbols @subsection Standard Symbols @cindex Standard symbols All the generic macros that @code{AC_DEFINE} a symbol as a result of their test transform their @var{argument} values to a standard alphabet. First, @var{argument} is converted to upper case and any asterisks (@samp{*}) are each converted to @samp{P}. Any remaining characters that are not alphanumeric are converted to underscores. For instance, @example AC_CHECK_TYPES([struct $Expensive*]) @end example @noindent defines the symbol @samp{HAVE_STRUCT__EXPENSIVEP} if the check succeeds. @node Default Includes @subsection Default Includes @cindex Default includes @cindex Includes, default @hdrindex{assert.h} @hdrindex{ctype.h} @hdrindex{errno.h} @hdrindex{float.h} @hdrindex{iso646.h} @hdrindex{limits.h} @hdrindex{locale.h} @hdrindex{math.h} @hdrindex{setjmp.h} @hdrindex{signal.h} @hdrindex{stdarg.h} @hdrindex{stddef.h} @hdrindex{stdio.h} @hdrindex{stdlib.h} @hdrindex{string.h} @hdrindex{time.h} @hdrindex{wchar.h} @hdrindex{wctype.h} Test programs frequently need to include headers that may or may not be available on the system whose features are being tested. Each test can use all the preprocessor macros that have been @code{AC_DEFINE}d by previous tests, so for example one may write @example @group #include #ifdef HAVE_SYS_TIME_H # include #endif @end group @end example @noindent if @file{sys/time.h} has already been tested for. All hosted environments that are still of interest for portable code provide all of the headers specified in ISO C90 (as amended in 1995): @file{assert.h}, @file{ctype.h}, @file{errno.h}, @file{float.h}, @file{iso646.h}, @file{limits.h}, @file{locale.h}, @file{math.h}, @file{setjmp.h}, @file{signal.h}, @file{stdarg.h}, @file{stddef.h}, @file{stdio.h}, @file{stdlib.h}, @file{string.h}, @file{time.h}, @file{wchar.h}, and @file{wctype.h}. Most programs can safely include these headers unconditionally. All other headers, including all headers from later revisions of the C standard, need to be tested for (@pxref{Header Files}). If your program needs to be portable to a @emph{freestanding} environment, such as an embedded OS that doesn't provide all of the facilities of the C90 standard library, you may need to test for some of the above headers as well. Note that many Autoconf macros internally assume that the complete set of C90 headers are available. Most generic macros use the following macro to provide a default set of includes: @defmac AC_INCLUDES_DEFAULT (@ovar{include-directives}) @acindex{INCLUDES_DEFAULT} Expand to @var{include-directives} if present and nonempty, otherwise to: @example @group #include #include #include #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif @end group @end example Using this macro without @var{include-directives} has the side effect of checking for @file{sys/types.h}, @file{sys/stat.h}, @file{strings.h}, @file{inttypes.h}, @file{stdint.h}, and @file{unistd.h}, as if by @code{AC_CHECK_HEADERS}. For backward compatibility's sake, it also unconditionally defines @code{HAVE_STRING_H}, @code{HAVE_STDLIB_H}, and @code{STDC_HEADERS}. New code should not make use of these preprocessor macros. @end defmac @defmac AC_CHECK_INCLUDES_DEFAULT @acindex{CHECK_INCLUDES_DEFAULT} Check for all the headers that @code{AC_INCLUDES_DEFAULT} would check for as a side-effect, if this has not already happened. This macro mainly exists so that @code{autoupdate} can replace certain obsolete constructs with it. You should not need to use it yourself; in fact, it is likely to be safe to delete it from any script in which it appears. (@code{autoupdate} does not know whether preprocessor macros such as @code{HAVE_STDINT_H} are used in the program, nor whether they would get defined as a side-effect of other checks.) @end defmac @node Alternative Programs @section Alternative Programs @cindex Programs, checking These macros check for the presence or behavior of particular programs. They are used to choose between several alternative programs and to decide what to do once one has been chosen. If there is no macro specifically defined to check for a program you need, and you don't need to check for any special properties of it, then you can use one of the general program-check macros. @menu * Particular Programs:: Special handling to find certain programs * Generic Programs:: How to find other programs @end menu @node Particular Programs @subsection Particular Program Checks These macros check for particular programs---whether they exist, and in some cases whether they support certain features. @defmac AC_PROG_AWK @acindex{PROG_AWK} @ovindex AWK @caindex prog_AWK Check for @code{gawk}, @code{mawk}, @code{nawk}, and @code{awk}, in that order, and set output variable @code{AWK} to the first one that is found. It tries @code{gawk} first because that is reported to be the best implementation. The result can be overridden by setting the variable @code{AWK} or the cache variable @code{ac_cv_prog_AWK}. Using this macro is sufficient to avoid the pitfalls of traditional @command{awk} (@pxref{awk, , Limitations of Usual Tools}). @end defmac @defmac AC_PROG_GREP @acindex{PROG_GREP} @ovindex GREP @caindex prog_GREP Look for the best available @code{grep} or @code{ggrep} that accepts the longest input lines possible, and that supports multiple @option{-e} options. Set the output variable @code{GREP} to whatever is chosen. @xref{grep, , Limitations of Usual Tools}, for more information about portability problems with the @command{grep} command family. The result can be overridden by setting the @code{GREP} variable and is cached in the @code{ac_cv_path_GREP} variable. @end defmac @defmac AC_PROG_EGREP @acindex{PROG_EGREP} @ovindex EGREP @caindex prog_EGREP Check whether @code{$GREP -E} works, or else look for the best available @code{egrep} or @code{gegrep} that accepts the longest input lines possible. Set the output variable @code{EGREP} to whatever is chosen. The result can be overridden by setting the @code{EGREP} variable and is cached in the @code{ac_cv_path_EGREP} variable. @end defmac @defmac AC_PROG_FGREP @acindex{PROG_FGREP} @ovindex FGREP @caindex prog_FGREP Check whether @code{$GREP -F} works, or else look for the best available @code{fgrep} or @code{gfgrep} that accepts the longest input lines possible. Set the output variable @code{FGREP} to whatever is chosen. The result can be overridden by setting the @code{FGREP} variable and is cached in the @code{ac_cv_path_FGREP} variable. @end defmac @defmac AC_PROG_INSTALL @acindex{PROG_INSTALL} @ovindex INSTALL @ovindex INSTALL_PROGRAM @ovindex INSTALL_DATA @ovindex INSTALL_SCRIPT @caindex path_install @prindex @command{install-sh} Set output variable @code{INSTALL} to the name of a BSD-compatible @command{install} program, if one is found in the current @env{PATH}. Otherwise, set @code{INSTALL} to @samp{@var{dir}/install-sh -c}, checking the directories specified to @code{AC_CONFIG_AUX_DIR} (or its default directories) to determine @var{dir} (@pxref{Output}). Also set the variables @code{INSTALL_PROGRAM} and @code{INSTALL_SCRIPT} to @samp{$@{INSTALL@}} and @code{INSTALL_DATA} to @samp{$@{INSTALL@} -m 644}. @samp{@@INSTALL@@} is special, as its value may vary for different configuration files. This macro screens out various instances of @command{install} known not to work. It prefers to find a C program rather than a shell script, for speed. Instead of @file{install-sh}, it can also use @file{install.sh}, but that name is obsolete because some @command{make} programs have a rule that creates @file{install} from it if there is no makefile. Further, this macro requires @command{install} to be able to install multiple files into a target directory in a single invocation. Autoconf comes with a copy of @file{install-sh} that you can use. If you use @code{AC_PROG_INSTALL}, you must include @file{install-sh} in your distribution; otherwise @command{autoreconf} and @command{configure} will produce an error message saying they can't find it---even if the system you're on has a good @command{install} program. This check is a safety measure to prevent you from accidentally leaving that file out, which would prevent your package from installing on systems that don't have a BSD-compatible @command{install} program. If you need to use your own installation program because it has features not found in standard @command{install} programs, there is no reason to use @code{AC_PROG_INSTALL}; just put the file name of your program into your @file{Makefile.in} files. The result of the test can be overridden by setting the variable @code{INSTALL} or the cache variable @code{ac_cv_path_install}. @end defmac @defmac AC_PROG_MKDIR_P @acindex{PROG_MKDIR_P} @ovindex MKDIR_P @caindex path_mkdir @prindex @command{install-sh} Set output variable @code{MKDIR_P} to a program that ensures that for each argument, a directory named by this argument exists, creating it and its parent directories if needed, and without race conditions when two instances of the program attempt to make the same directory at nearly the same time. This macro uses the @samp{mkdir -p} command if possible. Otherwise, it falls back on invoking @command{install-sh} with the @option{-d} option, so your package should contain @file{install-sh} as described under @code{AC_PROG_INSTALL}. An @file{install-sh} file that predates Autoconf 2.60 or Automake 1.10 is vulnerable to race conditions, so if you want to support parallel installs from different packages into the same directory you need to make sure you have an up-to-date @file{install-sh}. In particular, be careful about using @samp{autoreconf -if} if your Automake predates Automake 1.10. This macro is related to the @code{AS_MKDIR_P} macro (@pxref{Programming in M4sh}), but it sets an output variable intended for use in other files, whereas @code{AS_MKDIR_P} is intended for use in scripts like @command{configure}. Also, @code{AS_MKDIR_P} does not accept options, but @code{MKDIR_P} supports the @option{-m} option, e.g., a makefile might invoke @code{$(MKDIR_P) -m 0 dir} to create an inaccessible directory, and conversely a makefile should use @code{$(MKDIR_P) -- $(FOO)} if @var{FOO} might yield a value that begins with @samp{-}. Finally, @code{AS_MKDIR_P} does not check for race condition vulnerability, whereas @code{AC_PROG_MKDIR_P} does. @samp{@@MKDIR_P@@} is special, as its value may vary for different configuration files. The result of the test can be overridden by setting the variable @code{MKDIR_P} or the cache variable @code{ac_cv_path_mkdir}. @end defmac @anchor{AC_PROG_LEX} @defmac AC_PROG_LEX (@var{options}) @acindex{PROG_LEX} @ovindex LEX @ovindex LEXLIB @cvindex YYTEXT_POINTER @ovindex LEX_OUTPUT_ROOT @caindex prog_LEX Search for a lexical analyzer generator, preferring @code{flex} to plain @code{lex}. Output variable @code{LEX} is set to whichever program is available. If neither program is available, @code{LEX} is set to @samp{:}; for packages that ship the generated @file{file.yy.c} alongside the source @file{file.l}, this default allows users without a lexer generator to still build the package even if the timestamp for @file{file.l} is inadvertently changed. The name of the program to use can be overridden by setting the output variable @code{LEX} or the cache variable @code{ac_cv_prog_LEX} when running @command{configure}. If a lexical analyzer generator is found, this macro performs additional checks for common portability pitfalls. If these additional checks fail, @code{LEX} is reset to @samp{:}; otherwise the following additional macros and variables are provided. Preprocessor macro @code{YYTEXT_POINTER} is defined if the lexer skeleton, by default, declares @code{yytext} as a @samp{@w{char *}} rather than a @samp{@w{char []}}. Output variable @code{LEX_OUTPUT_ROOT} is set to the base of the file name that the lexer generates; this is usually either @file{lex.yy} or @file{lexyy}. If generated lexers need a library to work, output variable @code{LEXLIB} is set to a link option for that library (e.g., @option{-ll}), otherwise it is set to empty. The @var{options} argument modifies the behavior of @code{AC_PROG_LEX}. It should be a whitespace-separated list of options. Currently there are only two options, and they are mutually exclusive: @table @code @item yywrap Indicate that the library in @code{LEXLIB} needs to define the function @code{yywrap}. If a library that defines this function cannot be found, @code{LEX} will be reset to @samp{:}. @item noyywrap Indicate that the library in @code{LEXLIB} does not need to define the function @code{yywrap}. @command{configure} will not search for it at all. @end table Prior to Autoconf 2.70, @code{AC_PROG_LEX} did not take any arguments, and its behavior was different from either of the above possibilities: it would search for a library that defines @code{yywrap}, and would set @code{LEXLIB} to that library if it finds one. However, if a library that defines this function could not be found, @code{LEXLIB} would be left empty and @code{LEX} would @emph{not} be reset. This behavior was due to a bug, but several packages came to depend on it, so @code{AC_PROG_LEX} still does this if neither the @code{yywrap} nor the @code{noyywrap} option is given. Usage of @code{AC_PROG_LEX} without choosing one of the @code{yywrap} or @code{noyywrap} options is deprecated. It is usually better to use @code{noyywrap} and define the @code{yywrap} function yourself, as this almost always renders the @code{LEXLIB} unnecessary. @strong{Caution:} As a side-effect of the test, this macro may delete any file in the configure script's current working directory named @file{lex.yy.c} or @file{lexyy.c}. @strong{Caution:} Packages that ship a generated @file{lex.yy.c} cannot assume that the definition of @code{YYTEXT_POINTER} matches the code in that file. They also cannot assume that @code{LEXLIB} provides the library routines required by the code in that file. If you use Flex to generate @file{lex.yy.c}, you can work around these limitations by defining @code{yywrap} and @code{main} yourself (rendering @code{-lfl} unnecessary), and by using either the @option{--array} or @option{--pointer} options to control how @code{yytext} is declared. The code generated by Flex is also more portable than the code generated by historical versions of Lex. If you have used Flex to generate @file{lex.yy.c}, and especially if your scanner depends on Flex features, we recommend you use this Autoconf snippet to prevent the scanner being regenerated with historical Lex: @example AC_PROG_LEX if test "x$LEX" != xflex; then LEX="$SHELL $missing_dir/missing flex" AC_SUBST([LEX_OUTPUT_ROOT], [lex.yy]) AC_SUBST([LEXLIB], ['']) fi @end example The shell script @command{missing} can be found in the Automake distribution. Remember that the user may have supplied an alternate location in @env{LEX}, so if Flex is required, it is better to check that the user provided something sufficient by parsing the output of @samp{$LEX --version} than by simply relying on @code{test "x$LEX" = xflex}. @end defmac @anchor{AC_PROG_LN_S} @defmac AC_PROG_LN_S @acindex{PROG_LN_S} @ovindex LN_S If @samp{ln -s} works on the current file system (the operating system and file system support symbolic links), set the output variable @code{LN_S} to @samp{ln -s}; otherwise, if @samp{ln} works, set @code{LN_S} to @samp{ln}, and otherwise set it to @samp{cp -pR}. If you make a link in a directory other than the current directory, its meaning depends on whether @samp{ln} or @samp{ln -s} is used. To safely create links using @samp{$(LN_S)}, either find out which form is used and adjust the arguments, or always invoke @code{ln} in the directory where the link is to be created. In other words, it does not work to do: @example $(LN_S) foo /x/bar @end example Instead, do: @example (cd /x && $(LN_S) foo bar) @end example @end defmac @defmac AC_PROG_RANLIB @acindex{PROG_RANLIB} @ovindex RANLIB @c @caindex prog_RANLIB @c @caindex prog_ac_ct_RANLIB Set output variable @code{RANLIB} to @samp{ranlib} if @code{ranlib} is found, and otherwise to @samp{:} (do nothing). @end defmac @defmac AC_PROG_SED @acindex{PROG_SED} @ovindex SED @caindex path_SED Set output variable @code{SED} to a Sed implementation that conforms to Posix and does not have arbitrary length limits. Report an error if no acceptable Sed is found. @xref{sed, , Limitations of Usual Tools}, for more information about portability problems with Sed. The result of this test can be overridden by setting the @code{SED} variable and is cached in the @code{ac_cv_path_SED} variable. @end defmac @defmac AC_PROG_YACC @acindex{PROG_YACC} @evindex YACC @evindex YFLAGS @ovindex YACC @caindex prog_YACC If @code{bison} is found, set output variable @code{YACC} to @samp{bison -y}. Otherwise, if @code{byacc} is found, set @code{YACC} to @samp{byacc}. Otherwise set @code{YACC} to @samp{yacc}. The result of this test can be influenced by setting the variable @code{YACC} or the cache variable @code{ac_cv_prog_YACC}. @end defmac @node Generic Programs @subsection Generic Program and File Checks These macros are used to find programs not covered by the ``particular'' test macros. If you need to check the behavior of a program as well as find out whether it is present, you have to write your own test for it (@pxref{Writing Tests}). By default, these macros use the environment variable @env{PATH}. If you need to check for a program that might not be in the user's @env{PATH}, you can pass a modified path to use instead, like this: @example AC_PATH_PROG([INETD], [inetd], [/usr/libexec/inetd], [$PATH$PATH_SEPARATOR/usr/libexec$PATH_SEPARATOR]dnl [/usr/sbin$PATH_SEPARATOR/usr/etc$PATH_SEPARATOR/etc]) @end example You are strongly encouraged to declare the @var{variable} passed to @code{AC_CHECK_PROG} etc.@: as precious. @xref{Setting Output Variables}, @code{AC_ARG_VAR}, for more details. @anchor{AC_CHECK_PROG} @defmac AC_CHECK_PROG (@var{variable}, @var{prog-to-check-for}, @ @var{value-if-found}, @ovar{value-if-not-found}, @dvar{path, $PATH}, @ @ovar{reject}) @acindex{CHECK_PROG} @caindex prog_@var{variable} Check whether program @var{prog-to-check-for} exists in @var{path}. If it is found, set @var{variable} to @var{value-if-found}, otherwise to @var{value-if-not-found}, if given. Always pass over @var{reject} (an absolute file name) even if it is the first found in the search path; in that case, set @var{variable} using the absolute file name of the @var{prog-to-check-for} found that is not @var{reject}. If @var{variable} was already set, do nothing. Calls @code{AC_SUBST} for @var{variable}. The result of this test can be overridden by setting the @var{variable} variable or the cache variable @code{ac_cv_prog_@var{variable}}. @end defmac @anchor{AC_CHECK_PROGS} @defmac AC_CHECK_PROGS (@var{variable}, @var{progs-to-check-for}, @ @ovar{value-if-not-found}, @dvar{path, $PATH}) @acindex{CHECK_PROGS} @caindex prog_@var{variable} Check for each program in the blank-separated list @var{progs-to-check-for} existing in the @var{path}. If one is found, set @var{variable} to the name of that program. Otherwise, continue checking the next program in the list. If none of the programs in the list are found, set @var{variable} to @var{value-if-not-found}; if @var{value-if-not-found} is not specified, the value of @var{variable} is not changed. Calls @code{AC_SUBST} for @var{variable}. The result of this test can be overridden by setting the @var{variable} variable or the cache variable @code{ac_cv_prog_@var{variable}}. @end defmac @defmac AC_CHECK_TARGET_TOOL (@var{variable}, @var{prog-to-check-for}, @ @ovar{value-if-not-found}, @dvar{path, $PATH}) @acindex{CHECK_TARGET_TOOL} Like @code{AC_CHECK_PROG}, but first looks for @var{prog-to-check-for} with a prefix of the target type as determined by @code{AC_CANONICAL_TARGET}, followed by a dash (@pxref{Canonicalizing}). If the tool cannot be found with a prefix, and if the build and target types are equal, then it is also searched for without a prefix. As noted in @ref{Specifying Target Triplets}, the target is rarely specified, because most of the time it is the same as the host: it is the type of system for which any compiler tool in the package produces code. What this macro looks for is, for example, @emph{a tool @r{(assembler, linker, etc.)}@: that the compiler driver @r{(@command{gcc} for the GNU C Compiler)} uses to produce objects, archives or executables}. @end defmac @defmac AC_CHECK_TOOL (@var{variable}, @var{prog-to-check-for}, @ @ovar{value-if-not-found}, @dvar{path, $PATH}) @acindex{CHECK_TOOL} @c @caindex prog_@var{VARIABLE} @c @caindex prog_ac_ct_@var{VARIABLE} Like @code{AC_CHECK_PROG}, but first looks for @var{prog-to-check-for} with a prefix of the host type as specified by @option{--host}, followed by a dash. For example, if the user runs @samp{configure --build=x86_64-gnu --host=aarch64-linux-gnu}, then this call: @example AC_CHECK_TOOL([RANLIB], [ranlib], [:]) @end example @noindent sets @code{RANLIB} to @file{aarch64-linux-gnu-ranlib} if that program exists in @var{path}, or otherwise to @samp{ranlib} if that program exists in @var{path}, or to @samp{:} if neither program exists. When cross-compiling, this macro will issue a warning if no program prefixed with the host type could be found. For more information, see @ref{Specifying Target Triplets}. @end defmac @defmac AC_CHECK_TARGET_TOOLS (@var{variable}, @var{progs-to-check-for}, @ @ovar{value-if-not-found}, @dvar{path, $PATH}) @acindex{CHECK_TARGET_TOOLS} Like @code{AC_CHECK_TARGET_TOOL}, each of the tools in the list @var{progs-to-check-for} are checked with a prefix of the target type as determined by @code{AC_CANONICAL_TARGET}, followed by a dash (@pxref{Canonicalizing}). If none of the tools can be found with a prefix, and if the build and target types are equal, then the first one without a prefix is used. If a tool is found, set @var{variable} to the name of that program. If none of the tools in the list are found, set @var{variable} to @var{value-if-not-found}; if @var{value-if-not-found} is not specified, the value of @var{variable} is not changed. Calls @code{AC_SUBST} for @var{variable}. @end defmac @defmac AC_CHECK_TOOLS (@var{variable}, @var{progs-to-check-for}, @ @ovar{value-if-not-found}, @dvar{path, $PATH}) @acindex{CHECK_TOOLS} Like @code{AC_CHECK_TOOL}, each of the tools in the list @var{progs-to-check-for} are checked with a prefix of the host type as determined by @code{AC_CANONICAL_HOST}, followed by a dash (@pxref{Canonicalizing}). If none of the tools can be found with a prefix, then the first one without a prefix is used. If a tool is found, set @var{variable} to the name of that program. If none of the tools in the list are found, set @var{variable} to @var{value-if-not-found}; if @var{value-if-not-found} is not specified, the value of @var{variable} is not changed. Calls @code{AC_SUBST} for @var{variable}. When cross-compiling, this macro will issue a warning if no program prefixed with the host type could be found. For more information, see @ref{Specifying Target Triplets}. @end defmac @anchor{AC_PATH_PROG} @defmac AC_PATH_PROG (@var{variable}, @var{prog-to-check-for}, @ @ovar{value-if-not-found}, @dvar{path, $PATH}) @acindex{PATH_PROG} @caindex path_@var{variable} Like @code{AC_CHECK_PROG}, but set @var{variable} to the absolute name of @var{prog-to-check-for} if found. The result of this test can be overridden by setting the @var{variable} variable. A positive result of this test is cached in the @code{ac_cv_path_@var{variable}} variable. @end defmac @anchor{AC_PATH_PROGS} @defmac AC_PATH_PROGS (@var{variable}, @var{progs-to-check-for}, @ @ovar{value-if-not-found}, @dvar{path, $PATH}) @acindex{PATH_PROGS} @caindex path_@var{variable} Like @code{AC_CHECK_PROGS}, but if any of @var{progs-to-check-for} are found, set @var{variable} to the absolute name of the program found. The result of this test can be overridden by setting the @var{variable} variable. A positive result of this test is cached in the @code{ac_cv_path_@var{variable}} variable. @end defmac @defmac AC_PATH_PROGS_FEATURE_CHECK (@var{variable}, @ @var{progs-to-check-for}, @var{feature-test}, @ @ovar{action-if-not-found}, @dvar{path, $PATH}) @acindex{PATH_PROGS_FEATURE_CHECK} @caindex path_@var{variable} @vrindex ac_path_@var{variable} @vrindex ac_path_@var{variable}_found This macro was introduced in Autoconf 2.62. If @var{variable} is not empty, then set the cache variable @code{ac_cv_path_@var{variable}} to its value. Otherwise, check for each program in the blank-separated list @var{progs-to-check-for} existing in @var{path}. For each program found, execute @var{feature-test} with @code{ac_path_@var{variable}} set to the absolute name of the candidate program. If no invocation of @var{feature-test} sets the shell variable @code{ac_cv_path_@var{variable}}, then @var{action-if-not-found} is executed. @var{feature-test} will be run even when @code{ac_cv_path_@var{variable}} is set, to provide the ability to choose a better candidate found later in @var{path}; to accept the current setting and bypass all further checks, @var{feature-test} can execute @code{ac_path_@var{variable}_found=:}. Note that this macro has some subtle differences from @code{AC_CHECK_PROGS}. It is designed to be run inside @code{AC_CACHE_VAL}, therefore, it should have no side effects. In particular, @var{variable} is not set to the final value of @code{ac_cv_path_@var{variable}}, nor is @code{AC_SUBST} automatically run. Also, on failure, any action can be performed, whereas @code{AC_CHECK_PROGS} only performs @code{@var{variable}=@var{value-if-not-found}}. Here is an example, similar to what Autoconf uses in its own configure script. It will search for an implementation of @command{m4} that supports the @code{indir} builtin, even if it goes by the name @command{gm4} or is not the first implementation on @env{PATH}. @example AC_CACHE_CHECK([for m4 that supports indir], [ac_cv_path_M4], [AC_PATH_PROGS_FEATURE_CHECK([M4], [m4 gm4], [[m4out=`echo 'changequote([,])indir([divnum])' | $ac_path_M4` test "x$m4out" = x0 \ && ac_cv_path_M4=$ac_path_M4 ac_path_M4_found=:]], [AC_MSG_ERROR([could not find m4 that supports indir])])]) AC_SUBST([M4], [$ac_cv_path_M4]) @end example @end defmac @defmac AC_PATH_TARGET_TOOL (@var{variable}, @var{prog-to-check-for}, @ @ovar{value-if-not-found}, @dvar{path, $PATH}) @acindex{PATH_TARGET_TOOL} Like @code{AC_CHECK_TARGET_TOOL}, but set @var{variable} to the absolute name of the program if it is found. @end defmac @defmac AC_PATH_TOOL (@var{variable}, @var{prog-to-check-for}, @ @ovar{value-if-not-found}, @dvar{path, $PATH}) @acindex{PATH_TOOL} Like @code{AC_CHECK_TOOL}, but set @var{variable} to the absolute name of the program if it is found. When cross-compiling, this macro will issue a warning if no program prefixed with the host type could be found. For more information, see @ref{Specifying Target Triplets}. @end defmac @node Files @section Files @cindex File, checking You might also need to check for the existence of files. Before using these macros, ask yourself whether a runtime test might not be a better solution. Be aware that, like most Autoconf macros, they test a feature of the host machine, and therefore, they die when cross-compiling. @defmac AC_CHECK_FILE (@var{file}, @ovar{action-if-found}, @ @ovar{action-if-not-found}) @acindex{CHECK_FILE} @caindex file_@var{file} Check whether file @var{file} exists on the native system. If it is found, execute @var{action-if-found}, otherwise do @var{action-if-not-found}, if given. Cache the result of this test in the @code{ac_cv_file_@var{file}} variable, with characters not suitable for a variable name mapped to underscores. @end defmac @defmac AC_CHECK_FILES (@var{files}, @ovar{action-if-found}, @ @ovar{action-if-not-found}) @acindex{CHECK_FILES} @caindex file_@var{file} For each file listed in @var{files}, execute @code{AC_CHECK_FILE} and perform either @var{action-if-found} or @var{action-if-not-found}. Like @code{AC_CHECK_FILE}, this defines @samp{HAVE_@var{file}} (@pxref{Standard Symbols}) for each file found and caches the results of each test in the @code{ac_cv_file_@var{file}} variable, with characters not suitable for a variable name mapped to underscores. @end defmac @node Libraries @section Library Files @cindex Library, checking The following macros check for the presence of certain C, C++, Fortran, or Go library archive files. @anchor{AC_CHECK_LIB} @defmac AC_CHECK_LIB (@var{library}, @var{function}, @ @ovar{action-if-found}, @ovar{action-if-not-found}, @ovar{other-libraries}) @acindex{CHECK_LIB} @caindex lib_@var{library}_@var{function} Test whether the library @var{library} is available by trying to link a test program that calls function @var{function} with the library. @var{function} should be a function provided by the library. Use the base name of the library; e.g., to check for @option{-lmp}, use @samp{mp} as the @var{library} argument. @var{action-if-found} is a list of shell commands to run if the link with the library succeeds; @var{action-if-not-found} is a list of shell commands to run if the link fails. If @var{action-if-found} is not specified, the default action prepends @option{-l@var{library}} to @code{LIBS} and defines @samp{HAVE_LIB@var{library}} (in all capitals). This macro is intended to support building @code{LIBS} in a right-to-left (least-dependent to most-dependent) fashion such that library dependencies are satisfied as a natural side effect of consecutive tests. Linkers are sensitive to library ordering so the order in which @code{LIBS} is generated is important to reliable detection of libraries. If linking with @var{library} results in unresolved symbols that would be resolved by linking with additional libraries, give those libraries as the @var{other-libraries} argument, separated by spaces: e.g., @option{-lXt -lX11}. Otherwise, this macro may fail to detect that @var{library} is present, because linking the test program can fail with unresolved symbols. The @var{other-libraries} argument should be limited to cases where it is desirable to test for one library in the presence of another that is not already in @code{LIBS}. @code{AC_CHECK_LIB} requires some care in usage, and should be avoided in some common cases. Many standard functions like @code{gethostbyname} appear in the standard C library on some hosts, and in special libraries like @code{nsl} on other hosts. On some hosts the special libraries contain variant implementations that you may not want to use. These days it is normally better to use @code{AC_SEARCH_LIBS([gethostbyname], [nsl])} instead of @code{AC_CHECK_LIB([nsl], [gethostbyname])}. The result of this test is cached in the @code{ac_cv_lib_@var{library}_@var{function}} variable. @end defmac @anchor{AC_SEARCH_LIBS} @defmac AC_SEARCH_LIBS (@var{function}, @var{search-libs}, @ @ovar{action-if-found}, @ovar{action-if-not-found}, @ovar{other-libraries}) @acindex{SEARCH_LIBS} @caindex search_@var{function} Search for a library defining @var{function} if it's not already available. This equates to calling @samp{AC_LINK_IFELSE([AC_LANG_CALL([], [@var{function}])])} first with no libraries, then for each library listed in @var{search-libs}. Prepend @option{-l@var{library}} to @code{LIBS} for the first library found to contain @var{function}, and run @var{action-if-found}. If the function is not found, run @var{action-if-not-found}. If linking with @var{library} results in unresolved symbols that would be resolved by linking with additional libraries, give those libraries as the @var{other-libraries} argument, separated by spaces: e.g., @option{-lXt -lX11}. Otherwise, this macro fails to detect that @var{function} is present, because linking the test program always fails with unresolved symbols. The result of this test is cached in the @code{ac_cv_search_@var{function}} variable as @samp{none required} if @var{function} is already available, as @samp{no} if no library containing @var{function} was found, otherwise as the @option{-l@var{library}} option that needs to be prepended to @code{LIBS}. @end defmac @node Library Functions @section Library Functions The following macros check for particular C library functions. If there is no macro specifically defined to check for a function you need, and you don't need to check for any special properties of it, then you can use one of the general function-check macros. @menu * Function Portability:: Pitfalls with usual functions * Particular Functions:: Special handling to find certain functions * Generic Functions:: How to find other functions @end menu @node Function Portability @subsection Portability of C Functions @cindex Portability of C functions @cindex C function portability Most usual functions can either be missing, or be buggy, or be limited on some architectures. This section tries to make an inventory of these portability issues. By definition, this list always requires additions. A much more complete list is maintained by the Gnulib project (@pxref{Gnulib}), covering @ref{Function Substitutes, , Current Posix Functions, gnulib, Gnulib}, @ref{Legacy Function Substitutes, , Legacy Functions, gnulib, Gnulib}, and @ref{Glibc Function Substitutes, , Glibc Functions, gnulib, Gnulib}. Please help us keep the Gnulib list as complete as possible. @table @asis @item @code{exit} @c @fuindex exit @prindex @code{exit} On ancient hosts, @code{exit} returned @code{int}. This is because @code{exit} predates @code{void}, and there was a long tradition of it returning @code{int}. On current hosts, the problem more likely is that @code{exit} is not declared, due to C++ problems of some sort or another. For this reason we suggest that test programs not invoke @code{exit}, but return from @code{main} instead. @item @code{free} @c @fuindex free @prindex @code{free} The C standard says a call @code{free (NULL)} does nothing, but some old systems don't support this (e.g., NextStep). @item @code{isinf} @itemx @code{isnan} @c @fuindex isinf @c @fuindex isnan @prindex @code{isinf} @prindex @code{isnan} In C99 and later, @code{isinf} and @code{isnan} are macros. On some systems just macros are available (e.g., HP-UX and Solaris 10), on some systems both macros and functions (e.g., glibc 2.3.2), and on some systems only functions (e.g., IRIX 6 and Solaris 9). In some cases these functions are declared in nonstandard headers like @code{} and defined in non-default libraries like @option{-lm} or @option{-lsunmath}. In C99 and later, @code{isinf} and @code{isnan} macros work correctly with @code{long double} arguments, but pre-C99 systems that use functions typically assume @code{double} arguments. On such a system, @code{isinf} incorrectly returns true for a finite @code{long double} argument that is outside the range of @code{double}. The best workaround for these issues is to use Gnulib modules @code{isinf} and @code{isnan} (@pxref{Gnulib}). But a lighter weight solution involves code like the following. @smallexample #include #ifndef isnan # define isnan(x) \ (sizeof (x) == sizeof (long double) ? isnan_ld (x) \ : sizeof (x) == sizeof (double) ? isnan_d (x) \ : isnan_f (x)) static int isnan_f (float x) @{ return x != x; @} static int isnan_d (double x) @{ return x != x; @} static int isnan_ld (long double x) @{ return x != x; @} #endif #ifndef isinf # define isinf(x) \ (sizeof (x) == sizeof (long double) ? isinf_ld (x) \ : sizeof (x) == sizeof (double) ? isinf_d (x) \ : isinf_f (x)) static int isinf_f (float x) @{ return !isnan (x) && isnan (x - x); @} static int isinf_d (double x) @{ return !isnan (x) && isnan (x - x); @} static int isinf_ld (long double x) @{ return !isnan (x) && isnan (x - x); @} #endif @end smallexample Some optimizing compilers mishandle these definitions, but systems with that bug typically have many other floating point corner-case compliance problems anyway, so it's probably not worth worrying about. @item @code{malloc} @c @fuindex malloc @prindex @code{malloc} The C standard says a call @code{malloc (0)} is implementation dependent. It can return either @code{NULL} or a new non-null pointer. The latter is more common (e.g., the GNU C Library) but is by no means universal. @code{AC_FUNC_MALLOC} can be used to insist on non-@code{NULL} (@pxref{Particular Functions}). @item @code{putenv} @c @fuindex putenv @prindex @code{putenv} Posix prefers @code{setenv} to @code{putenv}; among other things, @code{putenv} is not required of all Posix implementations, but @code{setenv} is. Posix specifies that @code{putenv} puts the given string directly in @code{environ}, but some systems make a copy of it instead (e.g., glibc 2.0, or BSD). And when a copy is made, @code{unsetenv} might not free it, causing a memory leak (e.g., FreeBSD 4). On some systems @code{putenv ("FOO")} removes @samp{FOO} from the environment, but this is not standard usage and it dumps core on some systems (e.g., AIX). On MinGW, a call @code{putenv ("FOO=")} removes @samp{FOO} from the environment, rather than inserting it with an empty value. @item @code{realloc} @c @fuindex realloc @prindex @code{realloc} The C standard says a call @code{realloc (NULL, size)} is equivalent to @code{malloc (size)}, but some old systems don't support this (e.g., NextStep). @item @code{signal} handler @c @fuindex signal @prindex @code{signal} @prindex @code{sigaction} Normally @code{signal} takes a handler function with a return type of @code{void}, but some old systems required @code{int} instead. Any actual @code{int} value returned is not used; this is only a difference in the function prototype demanded. All systems we know of in current use return @code{void}. The @code{int} was to support K&R C, where of course @code{void} is not available. The obsolete macro @code{AC_TYPE_SIGNAL} (@pxref{AC_TYPE_SIGNAL}) can be used to establish the correct type in all cases. In most cases, it is more robust to use @code{sigaction} when it is available, rather than @code{signal}. @item @code{snprintf} @c @fuindex snprintf @prindex @code{snprintf} @c @fuindex vsnprintf @prindex @code{vsnprintf} In C99 and later, if the output array isn't big enough and if no other errors occur, @code{snprintf} and @code{vsnprintf} truncate the output and return the number of bytes that ought to have been produced. Some older systems return the truncated length (e.g., GNU C Library 2.0.x or IRIX 6.5), some a negative value (e.g., earlier GNU C Library versions), and some the buffer length without truncation (e.g., 32-bit Solaris 7). Also, some buggy older systems ignore the length and overrun the buffer (e.g., 64-bit Solaris 7). @item @code{sprintf} @c @fuindex sprintf @prindex @code{sprintf} @c @fuindex vsprintf @prindex @code{vsprintf} The C standard says @code{sprintf} and @code{vsprintf} return the number of bytes written. On some ancient systems (SunOS 4 for instance) they return the buffer pointer instead, but these no longer need to be worried about. @item @code{sscanf} @c @fuindex sscanf @prindex @code{sscanf} On various old systems, e.g., HP-UX 9, @code{sscanf} requires that its input string be writable (though it doesn't actually change it). This can be a problem when using @command{gcc} since it normally puts constant strings in read-only memory (@pxref{Incompatibilities, Incompatibilities of GCC, , gcc, Using and Porting the GNU Compiler Collection}). Apparently in some cases even having format strings read-only can be a problem. @item @code{strerror_r} @c @fuindex strerror_r @prindex @code{strerror_r} Posix specifies that @code{strerror_r} returns an @code{int}, but many systems (e.g., GNU C Library version 2.2.4) provide a different version returning a @code{char *}. @code{AC_FUNC_STRERROR_R} can detect which is in use (@pxref{Particular Functions}). @item @code{strnlen} @c @fuindex strnlen @prindex @code{strnlen} AIX 4.3 provides a broken version which produces the following results: @example strnlen ("foobar", 0) = 0 strnlen ("foobar", 1) = 3 strnlen ("foobar", 2) = 2 strnlen ("foobar", 3) = 1 strnlen ("foobar", 4) = 0 strnlen ("foobar", 5) = 6 strnlen ("foobar", 6) = 6 strnlen ("foobar", 7) = 6 strnlen ("foobar", 8) = 6 strnlen ("foobar", 9) = 6 @end example @item @code{sysconf} @c @fuindex sysconf @prindex @code{sysconf} @code{_SC_PAGESIZE} is standard, but some older systems (e.g., HP-UX 9) have @code{_SC_PAGE_SIZE} instead. This can be tested with @code{#ifdef}. @item @code{unlink} @c @fuindex unlink @prindex @code{unlink} The Posix spec says that @code{unlink} causes the given file to be removed only after there are no more open file handles for it. Some non-Posix hosts have trouble with this requirement, though, and some DOS variants even corrupt the file system. @item @code{unsetenv} @c @fuindex unsetenv @prindex @code{unsetenv} On MinGW, @code{unsetenv} is not available, but a variable @samp{FOO} can be removed with a call @code{putenv ("FOO=")}, as described under @code{putenv} above. @item @code{va_copy} @c @fuindex va_copy @prindex @code{va_copy} C99 and later provide @code{va_copy} for copying @code{va_list} variables. It may be available in older environments too, though possibly as @code{__va_copy} (e.g., @command{gcc} in strict pre-C99 mode). These can be tested with @code{#ifdef}. A fallback to @code{memcpy (&dst, &src, sizeof (va_list))} gives maximum portability. @item @code{va_list} @c @fuindex va_list @prindex @code{va_list} @code{va_list} is not necessarily just a pointer. It can be a @code{struct} (e.g., @command{gcc} on Alpha), which means @code{NULL} is not portable. Or it can be an array (e.g., @command{gcc} in some PowerPC configurations), which means as a function parameter it can be effectively call-by-reference and library routines might modify the value back in the caller (e.g., @code{vsnprintf} in the GNU C Library 2.1). @item Signed @code{>>} Normally the C @code{>>} right shift of a signed type replicates the high bit, giving a so-called ``arithmetic'' shift. But care should be taken since Standard C doesn't require that behavior. On those few processors without a native arithmetic shift (for instance Cray vector systems) zero bits may be shifted in, the same as a shift of an unsigned type. @item Integer @code{/} C divides signed integers by truncating their quotient toward zero, yielding the same result as Fortran. However, before C99 the standard allowed C implementations to take the floor or ceiling of the quotient in some cases. Hardly any implementations took advantage of this freedom, though, and it's probably not worth worrying about this issue nowadays. @end table @node Particular Functions @subsection Particular Function Checks @cindex Function, checking These macros check for particular C functions---whether they exist, and in some cases how they respond when given certain arguments. @anchor{AC_FUNC_ALLOCA} @defmac AC_FUNC_ALLOCA @acindex{FUNC_ALLOCA} @cvindex C_ALLOCA @cvindex HAVE_ALLOCA_H @ovindex ALLOCA @c @fuindex alloca @prindex @code{alloca} @hdrindex{alloca.h} @c @caindex working_alloca_h Check for the @code{alloca} function. Define @code{HAVE_ALLOCA_H} if @file{alloca.h} defines a working @code{alloca}. If not, look for a builtin alternative. If either method succeeds, define @code{HAVE_ALLOCA}. Otherwise, set the output variable @code{ALLOCA} to @samp{$@{LIBOBJDIR@}alloca.o} and define @code{C_ALLOCA} (so programs can periodically call @samp{alloca (0)} to garbage collect). This variable is separate from @code{LIBOBJS} so multiple programs can share the value of @code{ALLOCA} without needing to create an actual library, in case only some of them use the code in @code{LIBOBJS}. The @samp{$@{LIBOBJDIR@}} prefix serves the same purpose as in @code{LIBOBJS} (@pxref{AC_LIBOBJ vs LIBOBJS}). Source files that use @code{alloca} should start with a piece of code like the following, to declare it properly. @example @group #include #include #ifdef HAVE_ALLOCA_H # include #elif !defined alloca # ifdef __GNUC__ # define alloca __builtin_alloca # elif defined _MSC_VER # include # define alloca _alloca # elif !defined HAVE_ALLOCA # ifdef __cplusplus extern "C" # endif void *alloca (size_t); # endif #endif @end group @end example If you don't want to maintain this piece of code in your package manually, you can instead use the Gnulib module @code{alloca-opt} or @code{alloca}. @xref{Gnulib}. @end defmac @defmac AC_FUNC_CHOWN @acindex{FUNC_CHOWN} @cvindex HAVE_CHOWN @c @fuindex chown @prindex @code{chown} @caindex func_chown_works If the @code{chown} function is available and works (in particular, it should accept @option{-1} for @code{uid} and @code{gid}), define @code{HAVE_CHOWN}. The result of this macro is cached in the @code{ac_cv_func_chown_works} variable. If you want a workaround, that is, a @code{chown} function that is available and works, you can use the Gnulib module @code{chown}. @xref{Gnulib}. @end defmac @anchor{AC_FUNC_CLOSEDIR_VOID} @defmac AC_FUNC_CLOSEDIR_VOID @acindex{FUNC_CLOSEDIR_VOID} @cvindex CLOSEDIR_VOID @c @fuindex closedir @prindex @code{closedir} @caindex func_closedir_void If the @code{closedir} function does not return a meaningful value, define @code{CLOSEDIR_VOID}. Otherwise, callers ought to check its return value for an error indicator. Currently this test is implemented by running a test program. When cross compiling the pessimistic assumption that @code{closedir} does not return a meaningful value is made. The result of this macro is cached in the @code{ac_cv_func_closedir_void} variable. This macro is obsolescent, as @code{closedir} returns a meaningful value on current systems. New programs need not use this macro. @end defmac @defmac AC_FUNC_ERROR_AT_LINE @acindex{FUNC_ERROR_AT_LINE} @c @fuindex error_at_line @prindex @code{error_at_line} @caindex lib_error_at_line If the @code{error_at_line} function is not found, require an @code{AC_LIBOBJ} replacement of @samp{error}. The result of this macro is cached in the @code{ac_cv_lib_error_at_line} variable. The @code{AC_FUNC_ERROR_AT_LINE} macro is obsolescent. New programs should use Gnulib's @code{error} module. @xref{Gnulib}. @end defmac @defmac AC_FUNC_FNMATCH @acindex{FUNC_FNMATCH} @c @fuindex fnmatch @prindex @code{fnmatch} @caindex func_fnmatch_works If the @code{fnmatch} function conforms to Posix, define @code{HAVE_FNMATCH}. Detect common implementation bugs, for example, the bugs in Solaris 2.4. Unlike the other specific @code{AC_FUNC} macros, @code{AC_FUNC_FNMATCH} does not replace a broken/missing @code{fnmatch}. This is for historical reasons. See @code{AC_REPLACE_FNMATCH} below. The result of this macro is cached in the @code{ac_cv_func_fnmatch_works} variable. This macro is obsolescent. New programs should use Gnulib's @code{fnmatch-posix} module. @xref{Gnulib}. @end defmac @defmac AC_FUNC_FNMATCH_GNU @acindex{FUNC_FNMATCH_GNU} @c @fuindex fnmatch @prindex @code{fnmatch} @caindex func_fnmatch_gnu Behave like @code{AC_REPLACE_FNMATCH} (@emph{replace}) but also test whether @code{fnmatch} supports GNU extensions. Detect common implementation bugs, for example, the bugs in the GNU C Library 2.1. The result of this macro is cached in the @code{ac_cv_func_fnmatch_gnu} variable. This macro is obsolescent. New programs should use Gnulib's @code{fnmatch-gnu} module. @xref{Gnulib}. @end defmac @anchor{AC_FUNC_FORK} @defmac AC_FUNC_FORK @acindex{FUNC_FORK} @cvindex HAVE_VFORK_H @cvindex HAVE_WORKING_FORK @cvindex HAVE_WORKING_VFORK @cvindex vfork @c @fuindex fork @prindex @code{fork} @c @fuindex vfork @prindex @code{vfork} @hdrindex{vfork.h} @c @caindex func_fork @c @caindex func_fork_works This macro checks for the @code{fork} and @code{vfork} functions. If a working @code{fork} is found, define @code{HAVE_WORKING_FORK}. This macro checks whether @code{fork} is just a stub by trying to run it. If @file{vfork.h} is found, define @code{HAVE_VFORK_H}. If a working @code{vfork} is found, define @code{HAVE_WORKING_VFORK}. Otherwise, define @code{vfork} to be @code{fork} for backward compatibility with previous versions of @command{autoconf}. This macro checks for several known errors in implementations of @code{vfork} and considers the system to not have a working @code{vfork} if it detects any of them. Since this macro defines @code{vfork} only for backward compatibility with previous versions of @command{autoconf} you're encouraged to define it yourself in new code: @example @group #ifndef HAVE_WORKING_VFORK # define vfork fork #endif @end group @end example The results of this macro are cached in the @code{ac_cv_func_fork_works} and @code{ac_cv_func_vfork_works} variables. In order to override the test, you also need to set the @code{ac_cv_func_fork} and @code{ac_cv_func_vfork} variables. @end defmac @defmac AC_FUNC_FSEEKO @acindex{FUNC_FSEEKO} @cvindex _LARGEFILE_SOURCE @cvindex HAVE_FSEEKO @c @fuindex fseeko @prindex @code{fseeko} @c @fuindex ftello @prindex @code{ftello} @c @caindex sys_largefile_source If the @code{fseeko} function is available, define @code{HAVE_FSEEKO}. Define @code{_LARGEFILE_SOURCE} if necessary to make the prototype visible on some systems (e.g., glibc 2.2). Otherwise linkage problems may occur when compiling with @code{AC_SYS_LARGEFILE} on largefile-sensitive systems where @code{off_t} does not default to a 64bit entity. All systems with @code{fseeko} also supply @code{ftello}. The Gnulib module @code{fseeko} invokes @code{AC_FUNC_FSEEKO} and also contains workarounds for other portability problems of @code{fseeko}. @xref{Gnulib}. @end defmac @defmac AC_FUNC_GETGROUPS @acindex{FUNC_GETGROUPS} @cvindex HAVE_GETGROUPS @ovindex GETGROUPS_LIBS @c @fuindex getgroups @prindex @code{getgroups} @caindex func_getgroups_works If the @code{getgroups} function is available and works (unlike on Ultrix 4.3 and NeXTstep 3.2, where @samp{getgroups (0, 0)} always fails), define @code{HAVE_GETGROUPS}. Set @code{GETGROUPS_LIBS} to any libraries needed to get that function. This macro runs @code{AC_TYPE_GETGROUPS}. This macro is obsolescent. New programs need not use this macro. But they may want to use the Gnulib module @code{getgroups}, which provides workarounds to other portability problems of this function. @end defmac @anchor{AC_FUNC_GETLOADAVG} @defmac AC_FUNC_GETLOADAVG @acindex{FUNC_GETLOADAVG} @cvindex SVR4 @cvindex DGUX @cvindex UMAX @cvindex UMAX4_3 @cvindex HAVE_NLIST_H @cvindex NLIST_NAME_UNION @cvindex GETLOADAVG_PRIVILEGED @cvindex NEED_SETGID @cvindex C_GETLOADAVG @ovindex LIBOBJS @ovindex NEED_SETGID @ovindex KMEM_GROUP @ovindex GETLOADAVG_LIBS @c @fuindex getloadavg @prindex @code{getloadavg} Check how to get the system load averages. To perform its tests properly, this macro needs the file @file{getloadavg.c}; therefore, be sure to set the @code{AC_LIBOBJ} replacement directory properly (see @ref{Generic Functions}, @code{AC_CONFIG_LIBOBJ_DIR}). If the system has the @code{getloadavg} function, define @code{HAVE_GETLOADAVG}, and set @code{GETLOADAVG_LIBS} to any libraries necessary to get that function. Also add @code{GETLOADAVG_LIBS} to @code{LIBS}. Otherwise, require an @code{AC_LIBOBJ} replacement for @samp{getloadavg} and possibly define several other C preprocessor macros and output variables: @enumerate @item Define @code{C_GETLOADAVG}. @item Define @code{SVR4}, @code{DGUX}, @code{UMAX}, or @code{UMAX4_3} if on those systems. @item @hdrindex{nlist.h} If @file{nlist.h} is found, define @code{HAVE_NLIST_H}. @item If @samp{struct nlist} has an @samp{n_un.n_name} member, define @code{HAVE_STRUCT_NLIST_N_UN_N_NAME}. The obsolete symbol @code{NLIST_NAME_UNION} is still defined, but do not depend upon it. @item Programs may need to be installed set-group-ID (or set-user-ID) for @code{getloadavg} to work. In this case, define @code{GETLOADAVG_PRIVILEGED}, set the output variable @code{NEED_SETGID} to @samp{true} (and otherwise to @samp{false}), and set @code{KMEM_GROUP} to the name of the group that should own the installed program. @end enumerate The @code{AC_FUNC_GETLOADAVG} macro is obsolescent. New programs should use Gnulib's @code{getloadavg} module. @xref{Gnulib}. @end defmac @anchor{AC_FUNC_GETMNTENT} @defmac AC_FUNC_GETMNTENT @acindex{FUNC_GETMNTENT} @cvindex HAVE_GETMNTENT @c @fuindex getmntent @prindex @code{getmntent} @caindex search_getmntent Check for @code{getmntent} in the standard C library, and then in the @file{sun}, @file{seq}, and @file{gen} libraries, for UNICOS, IRIX 4, PTX, and UnixWare, respectively. Then, if @code{getmntent} is available, define @code{HAVE_GETMNTENT} and set @code{ac_cv_func_getmntent} to @code{yes}. Otherwise set @code{ac_cv_func_getmntent} to @code{no}. The result of this macro can be overridden by setting the cache variable @code{ac_cv_search_getmntent}. The @code{AC_FUNC_GETMNTENT} macro is obsolescent. New programs should use Gnulib's @code{mountlist} module. @xref{Gnulib}. @end defmac @defmac AC_FUNC_GETPGRP @acindex{FUNC_GETPGRP} @cvindex GETPGRP_VOID @c @fuindex getpgid @c @fuindex getpgrp @prindex @code{getpgid} @prindex @code{getpgrp} @caindex func_getpgrp_void Define @code{GETPGRP_VOID} if it is an error to pass 0 to @code{getpgrp}; this is the Posix behavior. On older BSD systems, you must pass 0 to @code{getpgrp}, as it takes an argument and behaves like Posix's @code{getpgid}. @example #ifdef GETPGRP_VOID pid = getpgrp (); #else pid = getpgrp (0); #endif @end example This macro does not check whether @code{getpgrp} exists at all; if you need to work in that situation, first call @code{AC_CHECK_FUNC} for @code{getpgrp}. The result of this macro is cached in the @code{ac_cv_func_getpgrp_void} variable. This macro is obsolescent, as current systems have a @code{getpgrp} whose signature conforms to Posix. New programs need not use this macro. @end defmac @defmac AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK @acindex{FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK} @cvindex LSTAT_FOLLOWS_SLASHED_SYMLINK @c @fuindex lstat @prindex @code{lstat} @caindex func_lstat_dereferences_slashed_symlink If @file{link} is a symbolic link, then @code{lstat} should treat @file{link/} the same as @file{link/.}. However, many older @code{lstat} implementations incorrectly ignore trailing slashes. It is safe to assume that if @code{lstat} incorrectly ignores trailing slashes, then other symbolic-link-aware functions like @code{unlink} also incorrectly ignore trailing slashes. If @code{lstat} behaves properly, define @code{LSTAT_FOLLOWS_SLASHED_SYMLINK}, otherwise require an @code{AC_LIBOBJ} replacement of @code{lstat}. The result of this macro is cached in the @code{ac_cv_func_lstat_dereferences_slashed_symlink} variable. The @code{AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK} macro is obsolescent. New programs should use Gnulib's @code{lstat} module. @xref{Gnulib}. @end defmac @defmac AC_FUNC_MALLOC @acindex{FUNC_MALLOC} @cvindex HAVE_MALLOC @cvindex malloc @c @fuindex malloc @prindex @code{malloc} @caindex func_malloc_0_nonnull If the @code{malloc} function is compatible with the GNU C library @code{malloc} (i.e., @samp{malloc (0)} returns a valid pointer), define @code{HAVE_MALLOC} to 1. Otherwise define @code{HAVE_MALLOC} to 0, ask for an @code{AC_LIBOBJ} replacement for @samp{malloc}, and define @code{malloc} to @code{rpl_malloc} so that the native @code{malloc} is not used in the main project. Typically, the replacement file @file{malloc.c} should look like (note the @samp{#undef malloc}): @verbatim #include #undef malloc #include void *malloc (); /* Allocate an N-byte block of memory from the heap. If N is zero, allocate a 1-byte block. */ void * rpl_malloc (size_t n) { if (n == 0) n = 1; return malloc (n); } @end verbatim The result of this macro is cached in the @code{ac_cv_func_malloc_0_nonnull} variable. If you don't want to maintain a @code{malloc.c} file in your package manually, you can instead use the Gnulib module @code{malloc-gnu}. @end defmac @defmac AC_FUNC_MBRTOWC @acindex{FUNC_MBRTOWC} @cvindex HAVE_MBRTOWC @c @fuindex mbrtowc @prindex @code{mbrtowc} @caindex func_mbrtowc Define @code{HAVE_MBRTOWC} to 1 if the function @code{mbrtowc} and the type @code{mbstate_t} are properly declared. The result of this macro is cached in the @code{ac_cv_func_mbrtowc} variable. The Gnulib module @code{mbrtowc} not only ensures that the function is declared, but also works around other portability problems of this function. @end defmac @defmac AC_FUNC_MEMCMP @acindex{FUNC_MEMCMP} @ovindex LIBOBJS @c @fuindex memcmp @prindex @code{memcmp} @caindex func_memcmp_working If the @code{memcmp} function is not available, or does not work on 8-bit data (like the one on SunOS 4.1.3), or fails when comparing 16 bytes or more and with at least one buffer not starting on a 4-byte boundary (such as the one on NeXT x86 OpenStep), require an @code{AC_LIBOBJ} replacement for @samp{memcmp}. The result of this macro is cached in the @code{ac_cv_func_memcmp_working} variable. This macro is obsolescent, as current systems have a working @code{memcmp}. New programs need not use this macro. @end defmac @defmac AC_FUNC_MKTIME @acindex{FUNC_MKTIME} @ovindex LIBOBJS @c @fuindex mktime @prindex @code{mktime} @caindex func_working_mktime If the @code{mktime} function is not available, or does not work correctly, require an @code{AC_LIBOBJ} replacement for @samp{mktime}. For the purposes of this test, @code{mktime} should conform to the Posix standard and should be the inverse of @code{localtime}. The result of this macro is cached in the @code{ac_cv_func_working_mktime} variable. The @code{AC_FUNC_MKTIME} macro is obsolescent. New programs should use Gnulib's @code{mktime} module. @xref{Gnulib}. @end defmac @anchor{AC_FUNC_MMAP} @defmac AC_FUNC_MMAP @acindex{FUNC_MMAP} @cvindex HAVE_MMAP @c @fuindex mmap @prindex @code{mmap} @caindex func_mmap_fixed_mapped If the @code{mmap} function exists and works correctly, define @code{HAVE_MMAP}. This checks only private fixed mapping of already-mapped memory. The result of this macro is cached in the @code{ac_cv_func_mmap_fixed_mapped} variable. Note: This macro asks for more than what an average program needs from @code{mmap}. In particular, the use of @code{MAP_FIXED} fails on HP-UX 11, whereas @code{mmap} otherwise works fine on this platform. @end defmac @defmac AC_FUNC_OBSTACK @acindex{FUNC_OBSTACK} @cvindex HAVE_OBSTACK @cindex obstack @caindex func_obstack If the obstacks are found, define @code{HAVE_OBSTACK}, else require an @code{AC_LIBOBJ} replacement for @samp{obstack}. The result of this macro is cached in the @code{ac_cv_func_obstack} variable. The @code{AC_FUNC_OBSTACK} macro is obsolescent. New programs should use Gnulib's @code{obstack} module. @xref{Gnulib}. @end defmac @defmac AC_FUNC_REALLOC @acindex{FUNC_REALLOC} @cvindex HAVE_REALLOC @cvindex realloc @c @fuindex realloc @prindex @code{realloc} @caindex func_realloc_0_nonnull If the @code{realloc} function is compatible with the GNU C library @code{realloc} (i.e., @samp{realloc (NULL, 0)} returns a valid pointer), define @code{HAVE_REALLOC} to 1. Otherwise define @code{HAVE_REALLOC} to 0, ask for an @code{AC_LIBOBJ} replacement for @samp{realloc}, and define @code{realloc} to @code{rpl_realloc} so that the native @code{realloc} is not used in the main project. See @code{AC_FUNC_MALLOC} for details. The result of this macro is cached in the @code{ac_cv_func_realloc_0_nonnull} variable. If you don't want to maintain a @code{realloc.c} file in your package manually, you can instead use the Gnulib module @code{realloc-gnu}. @end defmac @defmac AC_FUNC_SELECT_ARGTYPES @acindex{FUNC_SELECT_ARGTYPES} @cvindex SELECT_TYPE_ARG1 @cvindex SELECT_TYPE_ARG234 @cvindex SELECT_TYPE_ARG5 @c @fuindex select @prindex @code{select} @c @caindex func_select_args Determines the correct type to be passed for each of the @code{select} function's arguments, and defines those types in @code{SELECT_TYPE_ARG1}, @code{SELECT_TYPE_ARG234}, and @code{SELECT_TYPE_ARG5} respectively. @code{SELECT_TYPE_ARG1} defaults to @samp{int}, @code{SELECT_TYPE_ARG234} defaults to @samp{int *}, and @code{SELECT_TYPE_ARG5} defaults to @samp{struct timeval *}. This macro is obsolescent, as current systems have a @code{select} whose signature conforms to Posix. New programs need not use this macro. @end defmac @defmac AC_FUNC_SETPGRP @acindex{FUNC_SETPGRP} @cvindex SETPGRP_VOID @c @fuindex setpgrp @prindex @code{setpgrp} @caindex func_setpgrp_void If @code{setpgrp} takes no argument (the Posix version), define @code{SETPGRP_VOID}. Otherwise, it is the BSD version, which takes two process IDs as arguments. This macro does not check whether @code{setpgrp} exists at all; if you need to work in that situation, first call @code{AC_CHECK_FUNC} for @code{setpgrp}. The result of this macro is cached in the @code{ac_cv_func_setpgrp_void} variable. This macro is obsolescent, as current systems have a @code{setpgrp} whose signature conforms to Posix. New programs need not use this macro. @end defmac @defmac AC_FUNC_STAT @defmacx AC_FUNC_LSTAT @acindex{FUNC_STAT} @acindex{FUNC_LSTAT} @cvindex HAVE_STAT_EMPTY_STRING_BUG @cvindex HAVE_LSTAT_EMPTY_STRING_BUG @c @fuindex stat @prindex @code{stat} @c @fuindex lstat @prindex @code{lstat} @caindex func_stat_empty_string_bug @caindex func_lstat_empty_string_bug Determine whether @code{stat} or @code{lstat} have the bug that it succeeds when given the zero-length file name as argument. The @code{stat} and @code{lstat} from SunOS 4.1.4 and the Hurd (as of 1998-11-01) do this. If it does, then define @code{HAVE_STAT_EMPTY_STRING_BUG} (or @code{HAVE_LSTAT_EMPTY_STRING_BUG}) and ask for an @code{AC_LIBOBJ} replacement of it. The results of these macros are cached in the @code{ac_cv_func_stat_empty_string_bug} and the @code{ac_cv_func_lstat_empty_string_bug} variables, respectively. These macros are obsolescent, as no current systems have the bug. New programs need not use these macros. @end defmac @anchor{AC_FUNC_STRCOLL} @defmac AC_FUNC_STRCOLL @acindex{FUNC_STRCOLL} @cvindex HAVE_STRCOLL @c @fuindex strcoll @prindex @code{strcoll} @caindex func_strcoll_works If the @code{strcoll} function exists and works correctly, define @code{HAVE_STRCOLL}. This does a bit more than @samp{AC_CHECK_FUNCS(strcoll)}, because some systems have incorrect definitions of @code{strcoll} that should not be used. But it does not check against a known bug of this function on Solaris 10. The result of this macro is cached in the @code{ac_cv_func_strcoll_works} variable. @end defmac @defmac AC_FUNC_STRERROR_R @acindex{FUNC_STRERROR_R} @cvindex HAVE_STRERROR_R @cvindex HAVE_DECL_STRERROR_R @cvindex STRERROR_R_CHAR_P @c @fuindex strerror_r @caindex func_strerror_r_char_p @prindex @code{strerror_r} If @code{strerror_r} is available, define @code{HAVE_STRERROR_R}, and if it is declared, define @code{HAVE_DECL_STRERROR_R}. If it returns a @code{char *} message, define @code{STRERROR_R_CHAR_P}; otherwise it returns an @code{int} error number. The Thread-Safe Functions option of Posix requires @code{strerror_r} to return @code{int}, but many systems (including, for example, version 2.2.4 of the GNU C Library) return a @code{char *} value that is not necessarily equal to the buffer argument. The result of this macro is cached in the @code{ac_cv_func_strerror_r_char_p} variable. The Gnulib module @code{strerror_r} not only ensures that the function has the return type specified by Posix, but also works around other portability problems of this function. @end defmac @anchor{AC_FUNC_STRFTIME} @defmac AC_FUNC_STRFTIME @acindex{FUNC_STRFTIME} @cvindex HAVE_STRFTIME @c @fuindex strftime @prindex @code{strftime} Check for @code{strftime} in the @file{intl} library, for SCO Unix. Then, if @code{strftime} is available, define @code{HAVE_STRFTIME}. This macro is obsolescent, as no current systems require the @file{intl} library for @code{strftime}. New programs need not use this macro. @end defmac @defmac AC_FUNC_STRTOD @acindex{FUNC_STRTOD} @ovindex POW_LIB @c @fuindex strtod @prindex @code{strtod} @caindex func_strtod @caindex func_pow If the @code{strtod} function does not exist or doesn't work correctly, ask for an @code{AC_LIBOBJ} replacement of @samp{strtod}. In this case, because @file{strtod.c} is likely to need @samp{pow}, set the output variable @code{POW_LIB} to the extra library needed. This macro caches its result in the @code{ac_cv_func_strtod} variable and depends upon the result in the @code{ac_cv_func_pow} variable. The @code{AC_FUNC_STRTOD} macro is obsolescent. New programs should use Gnulib's @code{strtod} module. @xref{Gnulib}. @end defmac @defmac AC_FUNC_STRTOLD @acindex{FUNC_STRTOLD} @cvindex HAVE_STRTOLD @prindex @code{strtold} @caindex func_strtold If the @code{strtold} function exists and conforms to C99 or later, define @code{HAVE_STRTOLD}. This macro caches its result in the @code{ac_cv_func_strtold} variable. The Gnulib module @code{strtold} not only ensures that the function exists, but also works around other portability problems of this function. @end defmac @defmac AC_FUNC_STRNLEN @acindex{FUNC_STRNLEN} @cvindex HAVE_STRNLEN @c @fuindex strnlen @prindex @code{strnlen} @caindex func_strnlen_working If the @code{strnlen} function is not available, or is buggy (like the one from AIX 4.3), require an @code{AC_LIBOBJ} replacement for it. This macro caches its result in the @code{ac_cv_func_strnlen_working} variable. The @code{AC_FUNC_STRNLEN} macro is obsolescent. New programs should use Gnulib's @code{strnlen} module. @xref{Gnulib}. @end defmac @anchor{AC_FUNC_UTIME_NULL} @defmac AC_FUNC_UTIME_NULL @acindex{FUNC_UTIME_NULL} @cvindex HAVE_UTIME_NULL @c @fuindex utime @prindex @code{utime} @caindex func_utime_null If @samp{utime (@var{file}, NULL)} sets @var{file}'s timestamp to the present, define @code{HAVE_UTIME_NULL}. This macro caches its result in the @code{ac_cv_func_utime_null} variable. This macro is obsolescent, as all current systems have a @code{utime} that behaves this way. New programs need not use this macro. @end defmac @anchor{AC_FUNC_VPRINTF} @defmac AC_FUNC_VPRINTF @acindex{FUNC_VPRINTF} @cvindex HAVE_VPRINTF @cvindex HAVE_DOPRNT @c @fuindex vprintf @prindex @code{vprintf} @c @fuindex vsprintf @prindex @code{vsprintf} If @code{vprintf} is found, define @code{HAVE_VPRINTF}. Otherwise, if @code{_doprnt} is found, define @code{HAVE_DOPRNT}. (If @code{vprintf} is available, you may assume that @code{vfprintf} and @code{vsprintf} are also available.) This macro is obsolescent, as all current systems have @code{vprintf}. New programs need not use this macro. @end defmac @defmac AC_REPLACE_FNMATCH @acindex{REPLACE_FNMATCH} @c @fuindex fnmatch @prindex @code{fnmatch} @hdrindex{fnmatch.h} @caindex func_fnmatch_works If the @code{fnmatch} function does not conform to Posix (see @code{AC_FUNC_FNMATCH}), ask for its @code{AC_LIBOBJ} replacement. The files @file{fnmatch.c}, @file{fnmatch_loop.c}, and @file{fnmatch_.h} in the @code{AC_LIBOBJ} replacement directory are assumed to contain a copy of the source code of GNU @code{fnmatch}. If necessary, this source code is compiled as an @code{AC_LIBOBJ} replacement, and the @file{fnmatch_.h} file is linked to @file{fnmatch.h} so that it can be included in place of the system @code{}. This macro caches its result in the @code{ac_cv_func_fnmatch_works} variable. This macro is obsolescent, as it assumes the use of particular source files. New programs should use Gnulib's @code{fnmatch-posix} module, which provides this macro along with the source files. @xref{Gnulib}. @end defmac @node Generic Functions @subsection Generic Function Checks These macros are used to find functions not covered by the ``particular'' test macros. If the functions might be in libraries other than the default C library, first call @code{AC_CHECK_LIB} for those libraries. If you need to check the behavior of a function as well as find out whether it is present, you have to write your own test for it (@pxref{Writing Tests}). @anchor{AC_CHECK_FUNC} @defmac AC_CHECK_FUNC (@var{function}, @ovar{action-if-found}, @ @ovar{action-if-not-found}) @acindex{CHECK_FUNC} @caindex func_@var{function} If C function @var{function} is available, run shell commands @var{action-if-found}, otherwise @var{action-if-not-found}. If you just want to define a symbol if the function is available, consider using @code{AC_CHECK_FUNCS} instead. This macro checks for functions with C linkage even when @code{AC_LANG(C++)} has been called, since C is more standardized than C++. (@pxref{Language Choice}, for more information about selecting the language for checks.) This macro caches its result in the @code{ac_cv_func_@var{function}} variable. @end defmac @anchor{AC_CHECK_FUNCS} @defmac AC_CHECK_FUNCS (@var{function}@dots{}, @ovar{action-if-found}, @ @ovar{action-if-not-found}) @acindex{CHECK_FUNCS} @cvindex HAVE_@var{function} For each @var{function} enumerated in the blank-or-newline-separated argument list, define @code{HAVE_@var{function}} (in all capitals) if it is available. If @var{action-if-found} is given, it is additional shell code to execute when one of the functions is found. You can give it a value of @samp{break} to break out of the loop on the first match. If @var{action-if-not-found} is given, it is executed when one of the functions is not found. Results are cached for each @var{function} as in @code{AC_CHECK_FUNC}. @end defmac @defmac AC_CHECK_FUNCS_ONCE (@var{function}@dots{}) @acindex{CHECK_FUNCS_ONCE} @cvindex HAVE_@var{function} For each @var{function} enumerated in the blank-or-newline-separated argument list, define @code{HAVE_@var{function}} (in all capitals) if it is available. This is a once-only variant of @code{AC_CHECK_FUNCS}. It generates the checking code at most once, so that @command{configure} is smaller and faster; but the checks cannot be conditionalized and are always done once, early during the @command{configure} run. @end defmac @sp 1 Autoconf follows a philosophy that was formed over the years by those who have struggled for portability: isolate the portability issues in specific files, and then program as if you were in a Posix environment. Some functions may be missing or unfixable, and your package must be ready to replace them. Suitable replacements for many such problem functions are available from Gnulib (@pxref{Gnulib}). @defmac AC_LIBOBJ (@var{function}) @acindex{LIBOBJ} @ovindex LIBOBJS Specify that @samp{@var{function}.c} must be included in the executables to replace a missing or broken implementation of @var{function}. @vrindex ac_objext Technically, it adds @samp{@var{function}.$ac_objext} to the output variable @code{LIBOBJS} if it is not already in, and calls @code{AC_LIBSOURCE} for @samp{@var{function}.c}. You should not directly change @code{LIBOBJS}, since this is not traceable. @end defmac @defmac AC_LIBSOURCE (@var{file}) @acindex{LIBSOURCE} Specify that @var{file} might be needed to compile the project. If you need to know what files might be needed by a @file{configure.ac}, you should trace @code{AC_LIBSOURCE}. @var{file} must be a literal. This macro is called automatically from @code{AC_LIBOBJ}, but you must call it explicitly if you pass a shell variable to @code{AC_LIBOBJ}. In that case, since shell variables cannot be traced statically, you must pass to @code{AC_LIBSOURCE} any possible files that the shell variable might cause @code{AC_LIBOBJ} to need. For example, if you want to pass a variable @code{$foo_or_bar} to @code{AC_LIBOBJ} that holds either @code{"foo"} or @code{"bar"}, you should do: @example AC_LIBSOURCE([foo.c]) AC_LIBSOURCE([bar.c]) AC_LIBOBJ([$foo_or_bar]) @end example @noindent There is usually a way to avoid this, however, and you are encouraged to simply call @code{AC_LIBOBJ} with literal arguments. Note that this macro replaces the obsolete @code{AC_LIBOBJ_DECL}, with slightly different semantics: the old macro took the function name, e.g., @code{foo}, as its argument rather than the file name. @end defmac @defmac AC_LIBSOURCES (@var{files}) @acindex{LIBSOURCES} Like @code{AC_LIBSOURCE}, but accepts one or more @var{files} in a comma-separated M4 list. Thus, the above example might be rewritten: @example AC_LIBSOURCES([foo.c, bar.c]) AC_LIBOBJ([$foo_or_bar]) @end example @end defmac @defmac AC_CONFIG_LIBOBJ_DIR (@var{directory}) @acindex{CONFIG_LIBOBJ_DIR} Specify that @code{AC_LIBOBJ} replacement files are to be found in @var{directory}, a name relative to the top level of the source tree. The replacement directory defaults to @file{.}, the top level directory, and the most typical value is @file{lib}, corresponding to @samp{AC_CONFIG_LIBOBJ_DIR([lib])}. @command{configure} might need to know the replacement directory for the following reasons: (i) some checks use the replacement files, (ii) some macros bypass broken system headers by installing links to the replacement headers (iii) when used in conjunction with Automake, within each makefile, @var{directory} is used as a relative path from @code{$(top_srcdir)} to each object named in @code{LIBOBJS} and @code{LTLIBOBJS}, etc. @end defmac @sp 1 It is common to merely check for the existence of a function, and ask for its @code{AC_LIBOBJ} replacement if missing. The following macro is a convenient shorthand. @defmac AC_REPLACE_FUNCS (@var{function}@dots{}) @acindex{REPLACE_FUNCS} @cvindex HAVE_@var{function} @ovindex LIBOBJS Like @code{AC_CHECK_FUNCS}, but uses @samp{AC_LIBOBJ(@var{function})} as @var{action-if-not-found}. You can declare your replacement function by enclosing the prototype in @samp{#ifndef HAVE_@var{function}}. If the system has the function, it probably declares it in a header file you should be including, so you shouldn't redeclare it lest your declaration conflict. @end defmac @node Header Files @section Header Files @cindex Header, checking The following macros check for the presence of certain C header files. If there is no macro specifically defined to check for a header file you need, and you don't need to check for any special properties of it, then you can use one of the general header-file check macros. @menu * Header Portability:: Collected knowledge on common headers * Particular Headers:: Special handling to find certain headers * Generic Headers:: How to find other headers @end menu @node Header Portability @subsection Portability of Headers @cindex Portability of headers @cindex Header portability This section documents some collected knowledge about common headers, and the problems they cause. By definition, this list always requires additions. A much more complete list is maintained by the Gnulib project (@pxref{Gnulib}), covering @ref{Header File Substitutes, , Posix Headers, gnulib, Gnulib} and @ref{Glibc Header File Substitutes, , Glibc Headers, gnulib, Gnulib}. Please help us keep the Gnulib list as complete as possible. When we say that a header ``may require'' some set of other headers, we mean that it may be necessary for you to manually include those other headers first, or the contents of the header under test will fail to compile. When checking for these headers, you must provide the potentially-required headers in the @var{includes} argument to @code{AC_CHECK_HEADER} or @code{AC_CHECK_HEADERS}, or the check will fail spuriously. @code{AC_INCLUDES_DEFAULT} (@pxref{Default Includes}) arranges to include a number of common requirements and should normally come first in your @var{includes}. For example, @file{net/if.h} may require @file{sys/types.h}, @file{sys/socket.h}, or both, and @code{AC_INCLUDES_DEFAULT} handles @file{sys/types.h} but not @file{sys/socket.h}, so you should check for it like this: @example AC_CHECK_HEADERS([sys/socket.h]) AC_CHECK_HEADERS([net/if.h], [], [], [AC_INCLUDES_DEFAULT[ #ifdef HAVE_SYS_SOCKET_H # include #endif ]]) @end example Note that the example mixes single quoting (for@code{AC_INCLUDES_DEFAULT}, so that it gets expanded) and double quoting (to ensure that each preprocessor @code{#} gets treated as a literal string rather than a comment). @table @asis @item @file{limits.h} In C99 and later, @file{limits.h} defines @code{LLONG_MIN}, @code{LLONG_MAX}, and @code{ULLONG_MAX}, but many almost-C99 environments (e.g., default GCC 4.0.2 + glibc 2.4) do not define them. @item @file{memory.h} @hdrindex{memory.h} This header file is obsolete; use @file{string.h} instead. @item @file{strings.h} @hdrindex{strings.h} On some systems, this is the only header that declares @code{strcasecmp}, @code{strncasecmp}, and @code{ffs}. This header may or may not include @file{string.h} for you. However, on all recent systems it is safe to include both @file{string.h} and @file{strings.h}, in either order, in the same source file. @item @file{inttypes.h} vs.@: @file{stdint.h} @hdrindex{inttypes.h} @hdrindex{stdint.h} C99 specifies that @file{inttypes.h} includes @file{stdint.h}, so there's no need to include @file{stdint.h} separately in a standard environment. However, some implementations have @file{inttypes.h} but not @file{stdint.h} (e.g., Solaris 7), and some have @file{stdint.h} but not @file{inttypes.h} (e.g. MSVC 2012). Therefore, it is necessary to check for each and include each only if available. @item @file{linux/irda.h} @hdrindex{linux/irda.h} This header may require @file{linux/types.h} and/or @file{sys/socket.h}. @item @file{linux/random.h} @hdrindex{linux/random.h} This header may require @file{linux/types.h}. @item @file{net/if.h} @hdrindex{net/if.h} This header may require @file{sys/types.h} and/or @file{sys/socket.h}. @item @file{netinet/if_ether.h} @hdrindex{netinet/if_ether.h} This header may require some combination of @file{sys/types.h}, @file{sys/socket.h}, @file{netinet/in.h}, and @file{net/if.h}. @item @file{sys/mount.h} @hdrindex{sys/mount.h} This header may require @file{sys/params.h}. @item @file{sys/ptem.h} @hdrindex{sys/ptem.h} This header may require @file{sys/stream.h}. @item @file{sys/socket.h} @hdrindex{sys/socket.h} This header may require @file{sys/types.h}. @item @file{sys/ucred.h} @hdrindex{sys/ucred.h} This header may require @file{sys/types.h}. @item @file{X11/extensions/scrnsaver.h} @hdrindex{X11/extensions/scrnsaver.h} Using XFree86, this header requires @file{X11/Xlib.h}, which is probably so required that you might not even consider looking for it. @end table @node Particular Headers @subsection Particular Header Checks These macros check for particular system header files---whether they exist, and in some cases whether they declare certain symbols. @defmac AC_CHECK_HEADER_STDBOOL @acindex{CHECK_HEADER_STDBOOL} @cvindex HAVE__BOOL @hdrindex{stdbool.h} @caindex header_stdbool_h Check whether @file{stdbool.h} exists and conforms to C99 or later, and cache the result in the @code{ac_cv_header_stdbool_h} variable. If the type @code{_Bool} is defined, define @code{HAVE__BOOL} to 1. This macro is intended for use by Gnulib (@pxref{Gnulib}) and other packages that supply a substitute @file{stdbool.h} on platforms lacking a conforming one. The @code{AC_HEADER_STDBOOL} macro is better for code that explicitly checks for @file{stdbool.h}. @end defmac @defmac AC_HEADER_ASSERT @acindex{HEADER_ASSERT} @cvindex NDEBUG @hdrindex{assert.h} Check whether to enable assertions in the style of @file{assert.h}. Assertions are enabled by default, but the user can override this by invoking @command{configure} with the @option{--disable-assert} option. @end defmac @anchor{AC_HEADER_DIRENT} @defmac AC_HEADER_DIRENT @acindex{HEADER_DIRENT} @cvindex HAVE_DIRENT_H @cvindex HAVE_NDIR_H @cvindex HAVE_SYS_DIR_H @cvindex HAVE_SYS_NDIR_H @hdrindex{dirent.h} @hdrindex{sys/ndir.h} @hdrindex{sys/dir.h} @hdrindex{ndir.h} Check for the following header files. For the first one that is found and defines @samp{DIR}, define the listed C preprocessor macro: @multitable {@file{sys/ndir.h}} {@code{HAVE_SYS_NDIR_H}} @item @file{dirent.h} @tab @code{HAVE_DIRENT_H} @item @file{sys/ndir.h} @tab @code{HAVE_SYS_NDIR_H} @item @file{sys/dir.h} @tab @code{HAVE_SYS_DIR_H} @item @file{ndir.h} @tab @code{HAVE_NDIR_H} @end multitable The directory-library declarations in your source code should look something like the following: @example @group #include #ifdef HAVE_DIRENT_H # include # define NAMLEN(dirent) strlen ((dirent)->d_name) #else # define dirent direct # define NAMLEN(dirent) ((dirent)->d_namlen) # ifdef HAVE_SYS_NDIR_H # include # endif # ifdef HAVE_SYS_DIR_H # include # endif # ifdef HAVE_NDIR_H # include # endif #endif @end group @end example Using the above declarations, the program would declare variables to be of type @code{struct dirent}, not @code{struct direct}, and would access the length of a directory entry name by passing a pointer to a @code{struct dirent} to the @code{NAMLEN} macro. This macro also checks for the SCO Xenix @file{dir} and @file{x} libraries. This macro is obsolescent, as all current systems with directory libraries have @code{}. New programs need not use this macro. Also see @code{AC_STRUCT_DIRENT_D_INO} and @code{AC_STRUCT_DIRENT_D_TYPE} (@pxref{Particular Structures}). @end defmac @anchor{AC_HEADER_MAJOR} @defmac AC_HEADER_MAJOR @acindex{HEADER_MAJOR} @cvindex MAJOR_IN_MKDEV @cvindex MAJOR_IN_SYSMACROS @hdrindex{sys/mkdev.h} @hdrindex{sys/sysmacros.h} Detect the headers required to use @code{makedev}, @code{major}, and @code{minor}. These functions may be defined by @file{sys/mkdev.h}, @code{sys/sysmacros.h}, or @file{sys/types.h}. @code{AC_HEADER_MAJOR} defines @code{MAJOR_IN_MKDEV} if they are in @file{sys/mkdev.h}, or @code{MAJOR_IN_SYSMACROS} if they are in @file{sys/sysmacros.h}. If neither macro is defined, they are either in @file{sys/types.h} or unavailable. To properly use these functions, your code should contain something like: @verbatim #include #ifdef MAJOR_IN_MKDEV # include #elif defined MAJOR_IN_SYSMACROS # include #endif @end verbatim Note: Configure scripts built with Autoconf 2.69 or earlier will not detect a problem if @file{sys/types.h} contains definitions of @code{major}, @code{minor}, and/or @code{makedev} that trigger compiler warnings upon use. This is known to occur with GNU libc 2.25, where those definitions are being deprecated to reduce namespace pollution. If it is not practical to use Autoconf 2.70 to regenerate the configure script of affected software, you can work around the problem by setting @samp{ac_cv_header_sys_types_h_makedev=no}, as an argument to @command{configure} or as part of a @file{config.site} site default file (@pxref{Site Defaults}). @end defmac @defmac AC_HEADER_RESOLV @acindex{HEADER_RESOLV} @cvindex HAVE_RESOLV_H @hdrindex{resolv.h} Checks for header @file{resolv.h}, checking for prerequisites first. To properly use @file{resolv.h}, your code should contain something like the following: @verbatim #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_NETINET_IN_H # include /* inet_ functions / structs */ #endif #ifdef HAVE_ARPA_NAMESER_H # include /* DNS HEADER struct */ #endif #ifdef HAVE_NETDB_H # include #endif #include @end verbatim @end defmac @anchor{AC_HEADER_STAT} @defmac AC_HEADER_STAT @acindex{HEADER_STAT} @cvindex STAT_MACROS_BROKEN @hdrindex{sys/stat.h} If the macros @code{S_ISDIR}, @code{S_ISREG}, etc.@: defined in @file{sys/stat.h} do not work properly (returning false positives), define @code{STAT_MACROS_BROKEN}. This is the case on Tektronix UTekV, Amdahl UTS and Motorola System V/88. This macro is obsolescent, as no current systems have the bug. New programs need not use this macro. @end defmac @defmac AC_HEADER_STDBOOL @acindex{HEADER_STDBOOL} @cvindex HAVE_STDBOOL_H @cvindex HAVE__BOOL @hdrindex{stdbool.h} @caindex header_stdbool_h If @file{stdbool.h} exists and conforms to C99 or later, define @code{HAVE_STDBOOL_H} to 1; if the type @code{_Bool} is defined, define @code{HAVE__BOOL} to 1. To fulfill the standard's requirements, your program could contain the following code: @example @group #ifdef HAVE_STDBOOL_H # include #else # ifndef HAVE__BOOL # ifdef __cplusplus typedef bool _Bool; # else # define _Bool signed char # endif # endif # define bool _Bool # define false 0 # define true 1 # define __bool_true_false_are_defined 1 #endif @end group @end example Alternatively you can use the @samp{stdbool} package of Gnulib (@pxref{Gnulib}). It simplifies your code so that it can say just @code{#include }, and it adds support for less-common platforms. This macro caches its result in the @code{ac_cv_header_stdbool_h} variable. This macro differs from @code{AC_CHECK_HEADER_STDBOOL} only in that it defines @code{HAVE_STDBOOL_H} whereas @code{AC_CHECK_HEADER_STDBOOL} does not. @end defmac @anchor{AC_HEADER_STDC} @defmac AC_HEADER_STDC @acindex{HEADER_STDC} @cvindex STDC_HEADERS @caindex header_stdc This macro is obsolescent. Its sole effect is to make sure that all the headers that are included by @code{AC_INCLUDES_DEFAULT} (@pxref{Default Includes}), but not part of ISO C90, have been checked for. All hosted environments that are still of interest for portable code provide all of the headers specified in ISO C90 (as amended in 1995). @end defmac @defmac AC_HEADER_SYS_WAIT @acindex{HEADER_SYS_WAIT} @cvindex HAVE_SYS_WAIT_H @hdrindex{sys/wait.h} @caindex header_sys_wait_h If @file{sys/wait.h} exists and is compatible with Posix, define @code{HAVE_SYS_WAIT_H}. Incompatibility can occur if @file{sys/wait.h} does not exist, or if it uses the old BSD @code{union wait} instead of @code{int} to store a status value. If @file{sys/wait.h} is not Posix compatible, then instead of including it, define the Posix macros with their usual interpretations. Here is an example: @example @group #include #ifdef HAVE_SYS_WAIT_H # include #endif #ifndef WEXITSTATUS # define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8) #endif #ifndef WIFEXITED # define WIFEXITED(stat_val) (((stat_val) & 255) == 0) #endif @end group @end example @noindent This macro caches its result in the @code{ac_cv_header_sys_wait_h} variable. This macro is obsolescent, as current systems are compatible with Posix. New programs need not use this macro. @end defmac @cvindex _POSIX_VERSION @hdrindex{unistd.h} @code{_POSIX_VERSION} is defined when @file{unistd.h} is included on Posix systems. If there is no @file{unistd.h}, it is definitely not a Posix system. However, some non-Posix systems do have @file{unistd.h}. The way to check whether the system supports Posix is: @example @group #ifdef HAVE_UNISTD_H # include # include #endif #ifdef _POSIX_VERSION /* Code for Posix systems. */ #endif @end group @end example @defmac AC_HEADER_TIOCGWINSZ @acindex{HEADER_TIOCGWINSZ} @cvindex GWINSZ_IN_SYS_IOCTL @hdrindex{sys/ioctl.h} @hdrindex{termios.h} @c FIXME: I need clarifications from Jim. If the use of @code{TIOCGWINSZ} requires @file{}, then define @code{GWINSZ_IN_SYS_IOCTL}. Otherwise @code{TIOCGWINSZ} can be found in @file{}. Use: @example @group #ifdef HAVE_TERMIOS_H # include #endif #ifdef GWINSZ_IN_SYS_IOCTL # include #endif @end group @end example @end defmac @node Generic Headers @subsection Generic Header Checks These macros are used to find system header files not covered by the ``particular'' test macros. If you need to check the contents of a header as well as find out whether it is present, you have to write your own test for it (@pxref{Writing Tests}). @anchor{AC_CHECK_HEADER} @defmac AC_CHECK_HEADER (@var{header-file}, @ovar{action-if-found}, @ @ovar{action-if-not-found}, @ovar{includes}) @acindex{CHECK_HEADER} @caindex header_@var{header-file} If the system header file @var{header-file} is compilable, execute shell commands @var{action-if-found}, otherwise execute @var{action-if-not-found}. If you just want to define a symbol if the header file is available, consider using @code{AC_CHECK_HEADERS} instead. @var{includes} should be the appropriate @dfn{prerequisite} code, i.e.@: whatever might be required to appear above @samp{#include <@var{header-file}>} for it to compile without error. This can be anything, but will normally be additional @samp{#include} directives. If @var{includes} is omitted or empty, @file{configure} will use the contents of the macro @code{AC_INCLUDES_DEFAULT}. @xref{Default Includes}. This macro used to check only for the @emph{presence} of a header, not whether its contents were acceptable to the compiler. Some older @command{configure} scripts rely on this behavior, so it is still available by specifying @samp{-} as @var{includes}. This mechanism is deprecated as of Autoconf 2.70; situations where a preprocessor-only check is required should use @code{AC_PREPROC_IFELSE}. @xref{Running the Preprocessor}. This macro caches its result in the @code{ac_cv_header_@var{header-file}} variable, with characters not suitable for a variable name mapped to underscores. @end defmac @anchor{AC_CHECK_HEADERS} @defmac AC_CHECK_HEADERS (@var{header-file}@dots{}, @ @ovar{action-if-found}, @ovar{action-if-not-found}, @ @ovar{includes}) @acindex{CHECK_HEADERS} @cvindex HAVE_@var{header} @caindex header_@var{header-file} For each given system header file @var{header-file} in the blank-separated argument list that exists, define @code{HAVE_@var{header-file}} (in all capitals). If @var{action-if-found} is given, it is additional shell code to execute when one of the header files is found. You can give it a value of @samp{break} to break out of the loop on the first match. If @var{action-if-not-found} is given, it is executed when one of the header files is not found. @var{includes} is interpreted as in @code{AC_CHECK_HEADER}, in order to choose the set of preprocessor directives supplied before the header under test. This macro caches its result in the @code{ac_cv_header_@var{header-file}} variable, with characters not suitable for a variable name mapped to underscores. @end defmac @defmac AC_CHECK_HEADERS_ONCE (@var{header-file}@dots{}) @acindex{CHECK_HEADERS_ONCE} @cvindex HAVE_@var{header} For each given system header file @var{header-file} in the blank-separated argument list that exists, define @code{HAVE_@var{header-file}} (in all capitals). If you do not need the full power of @code{AC_CHECK_HEADERS}, this variant generates smaller, faster @command{configure} files. All headers passed to @code{AC_CHECK_HEADERS_ONCE} are checked for in one pass, early during the @command{configure} run. The checks cannot be conditionalized, you cannot specify an @var{action-if-found} or @var{action-if-not-found}, and @code{AC_INCLUDES_DEFAULT} is always used for the prerequisites. @end defmac In previous versions of Autoconf, these macros merely checked whether the header was accepted by the preprocessor. This was changed because the old test was inappropriate for typical uses. Headers are typically used to compile, not merely to preprocess, and the old behavior sometimes accepted headers that clashed at compile-time (@pxref{Present But Cannot Be Compiled}). If for some reason it is inappropriate to check whether a header is compilable, you should use @code{AC_PREPROC_IFELSE} (@pxref{Running the Preprocessor}) instead of these macros. Requiring each header to compile improves the robustness of the test, but it also requires you to make sure that the @var{includes} are correct. Most system headers nowadays make sure to @code{#include} whatever they require, or else have their dependencies satisfied by @code{AC_INCLUDES_DEFAULT} (@pxref{Default Includes}), but @pxref{Header Portability}, for known exceptions. In general, if you are looking for @file{bar.h}, which requires that @file{foo.h} be included first if it exists, you should do something like this: @example AC_CHECK_HEADERS([foo.h]) AC_CHECK_HEADERS([bar.h], [], [], [#ifdef HAVE_FOO_H # include #endif ]) @end example @node Declarations @section Declarations @cindex Declaration, checking The following macros check for the declaration of variables and functions. If there is no macro specifically defined to check for a symbol you need, then you can use the general macros (@pxref{Generic Declarations}) or, for more complex tests, you may use @code{AC_COMPILE_IFELSE} (@pxref{Running the Compiler}). @menu * Particular Declarations:: Macros to check for certain declarations * Generic Declarations:: How to find other declarations @end menu @node Particular Declarations @subsection Particular Declaration Checks There are no specific macros for declarations. @node Generic Declarations @subsection Generic Declaration Checks These macros are used to find declarations not covered by the ``particular'' test macros. @defmac AC_CHECK_DECL (@var{symbol}, @ovar{action-if-found}, @ @ovar{action-if-not-found}, @dvar{includes, AC_INCLUDES_DEFAULT}) @acindex{CHECK_DECL} @caindex have_decl_@var{symbol} If @var{symbol} (a function, variable, or constant) is not declared in @var{includes} and a declaration is needed, run the shell commands @var{action-if-not-found}, otherwise @var{action-if-found}. @var{includes} is a series of include directives, defaulting to @code{AC_INCLUDES_DEFAULT} (@pxref{Default Includes}), which are used prior to the declaration under test. This macro actually tests whether @var{symbol} is defined as a macro or can be used as an r-value, not whether it is really declared, because it is much safer to avoid introducing extra declarations when they are not needed. In order to facilitate use of C++ and overloaded function declarations, it is possible to specify function argument types in parentheses for types which can be zero-initialized: @example AC_CHECK_DECL([basename(char *)]) @end example Some compilers don't indicate every missing declaration by the error status. This macro checks the standard error from such compilers and considers a declaration missing if any warnings have been reported. For most compilers, though, warnings do not affect this macro's outcome unless @code{AC_LANG_WERROR} is also specified. This macro caches its result in the @code{ac_cv_have_decl_@var{symbol}} variable, with characters not suitable for a variable name mapped to underscores. @end defmac @anchor{AC_CHECK_DECLS} @defmac AC_CHECK_DECLS (@var{symbols}, @ovar{action-if-found}, @ @ovar{action-if-not-found}, @dvar{includes, AC_INCLUDES_DEFAULT}) @acindex{CHECK_DECLS} @cvindex HAVE_DECL_@var{symbol} @caindex have_decl_@var{symbol} For each of the @var{symbols} (@emph{comma}-separated list with optional function argument types for C++ overloads), define @code{HAVE_DECL_@var{symbol}} (in all capitals) to @samp{1} if @var{symbol} is declared, otherwise to @samp{0}. If @var{action-if-not-found} is given, it is additional shell code to execute when one of the function declarations is needed, otherwise @var{action-if-found} is executed. @var{includes} is a series of include directives, defaulting to @code{AC_INCLUDES_DEFAULT} (@pxref{Default Includes}), which are used prior to the declarations under test. This macro uses an M4 list as first argument: @example AC_CHECK_DECLS([strdup]) AC_CHECK_DECLS([strlen]) AC_CHECK_DECLS([malloc, realloc, calloc, free]) AC_CHECK_DECLS([j0], [], [], [[#include ]]) AC_CHECK_DECLS([[basename(char *)], [dirname(char *)]]) @end example Unlike the other @samp{AC_CHECK_*S} macros, when a @var{symbol} is not declared, @code{HAVE_DECL_@var{symbol}} is defined to @samp{0} instead of leaving @code{HAVE_DECL_@var{symbol}} undeclared. When you are @emph{sure} that the check was performed, use @code{HAVE_DECL_@var{symbol}} in @code{#if}: @example #if !HAVE_DECL_SYMBOL extern char *symbol; #endif @end example @noindent If the test may have not been performed, however, because it is safer @emph{not} to declare a symbol than to use a declaration that conflicts with the system's one, you should use: @example #if defined HAVE_DECL_MALLOC && !HAVE_DECL_MALLOC void *malloc (size_t *s); #endif @end example @noindent You fall into the second category only in extreme situations: either your files may be used without being configured, or they are used during the configuration. In most cases the traditional approach is enough. Some compilers don't indicate every missing declaration by the error status. This macro checks the standard error from such compilers and considers a declaration missing if any warnings have been reported. For most compilers, though, warnings do not affect this macro's outcome unless @code{AC_LANG_WERROR} is also specified. This macro caches its results in @code{ac_cv_have_decl_@var{symbol}} variables, with characters not suitable for a variable name mapped to underscores. @end defmac @defmac AC_CHECK_DECLS_ONCE (@var{symbols}) @acindex{CHECK_DECLS_ONCE} @cvindex HAVE_DECL_@var{symbol} For each of the @var{symbols} (@emph{comma}-separated list), define @code{HAVE_DECL_@var{symbol}} (in all capitals) to @samp{1} if @var{symbol} is declared in the default include files, otherwise to @samp{0}. This is a once-only variant of @code{AC_CHECK_DECLS}. It generates the checking code at most once, so that @command{configure} is smaller and faster; but the checks cannot be conditionalized and are always done once, early during the @command{configure} run. @end defmac @node Structures @section Structures @cindex Structure, checking The following macros check for the presence of certain members in C structures. If there is no macro specifically defined to check for a member you need, then you can use the general structure-member macros (@pxref{Generic Structures}) or, for more complex tests, you may use @code{AC_COMPILE_IFELSE} (@pxref{Running the Compiler}). @menu * Particular Structures:: Macros to check for certain structure members * Generic Structures:: How to find other structure members @end menu @node Particular Structures @subsection Particular Structure Checks The following macros check for certain structures or structure members. @defmac AC_STRUCT_DIRENT_D_INO @acindex{STRUCT_DIRENT_D_INO} @cvindex HAVE_STRUCT_DIRENT_D_INO @c @caindex header_dirent_dirent_h @c @caindex member_struct_dirent_d_ino Perform all the actions of @code{AC_HEADER_DIRENT} (@pxref{Particular Headers}). Then, if @code{struct dirent} contains a @code{d_ino} member, define @code{HAVE_STRUCT_DIRENT_D_INO}. @code{HAVE_STRUCT_DIRENT_D_INO} indicates only the presence of @code{d_ino}, not whether its contents are always reliable. Traditionally, a zero @code{d_ino} indicated a deleted directory entry, though current systems hide this detail from the user and never return zero @code{d_ino} values. Many current systems report an incorrect @code{d_ino} for a directory entry that is a mount point. @end defmac @defmac AC_STRUCT_DIRENT_D_TYPE @acindex{STRUCT_DIRENT_D_TYPE} @cvindex HAVE_STRUCT_DIRENT_D_TYPE @c @caindex header_dirent_dirent_h @c @caindex member_struct_dirent_d_type Perform all the actions of @code{AC_HEADER_DIRENT} (@pxref{Particular Headers}). Then, if @code{struct dirent} contains a @code{d_type} member, define @code{HAVE_STRUCT_DIRENT_D_TYPE}. @end defmac @anchor{AC_STRUCT_ST_BLOCKS} @defmac AC_STRUCT_ST_BLOCKS @acindex{STRUCT_ST_BLOCKS} @cvindex HAVE_STRUCT_STAT_ST_BLOCKS @cvindex HAVE_ST_BLOCKS @ovindex LIBOBJS @caindex member_struct_stat_st_blocks If @code{struct stat} contains an @code{st_blocks} member, define @code{HAVE_STRUCT_STAT_ST_BLOCKS}. Otherwise, require an @code{AC_LIBOBJ} replacement of @samp{fileblocks}. The former name, @code{HAVE_ST_BLOCKS} is to be avoided, as its support will cease in the future. This macro caches its result in the @code{ac_cv_member_struct_stat_st_blocks} variable. @end defmac @defmac AC_STRUCT_TM @acindex{STRUCT_TM} @cvindex TM_IN_SYS_TIME @hdrindex{time.h} @hdrindex{sys/time.h} If @file{time.h} does not define @code{struct tm}, define @code{TM_IN_SYS_TIME}, which means that including @file{sys/time.h} had better define @code{struct tm}. This macro is obsolescent, as @file{time.h} defines @code{struct tm} in current systems. New programs need not use this macro. @end defmac @anchor{AC_STRUCT_TIMEZONE} @defmac AC_STRUCT_TIMEZONE @acindex{STRUCT_TIMEZONE} @cvindex HAVE_DECL_TZNAME @cvindex HAVE_STRUCT_TM_TM_ZONE @cvindex HAVE_TM_ZONE @cvindex HAVE_TZNAME @c @caindex member_struct_tm_tm_zone @c @caindex struct_tm Figure out how to get the current timezone. If @code{struct tm} has a @code{tm_zone} member, define @code{HAVE_STRUCT_TM_TM_ZONE} (and the obsoleted @code{HAVE_TM_ZONE}). Otherwise, if the external array @code{tzname} is found, define @code{HAVE_TZNAME}; if it is declared, define @code{HAVE_DECL_TZNAME}. @end defmac @node Generic Structures @subsection Generic Structure Checks These macros are used to find structure members not covered by the ``particular'' test macros. @defmac AC_CHECK_MEMBER (@var{aggregate}.@var{member}, @ @ovar{action-if-found}, @ovar{action-if-not-found}, @ @dvar{includes, AC_INCLUDES_DEFAULT}) @acindex{CHECK_MEMBER} @caindex member_@var{aggregate}_@var{member} Check whether @var{member} is a member of the aggregate @var{aggregate}. If no @var{includes} are specified, the default includes are used (@pxref{Default Includes}). @example AC_CHECK_MEMBER([struct passwd.pw_gecos], [], [AC_MSG_ERROR([we need 'passwd.pw_gecos'])], [[#include ]]) @end example You can use this macro for submembers: @example AC_CHECK_MEMBER(struct top.middle.bot) @end example This macro caches its result in the @code{ac_cv_member_@var{aggregate}_@var{member}} variable, with characters not suitable for a variable name mapped to underscores. @end defmac @anchor{AC_CHECK_MEMBERS} @defmac AC_CHECK_MEMBERS (@var{members}, @ovar{action-if-found}, @ @ovar{action-if-not-found}, @dvar{includes, AC_INCLUDES_DEFAULT}) @acindex{CHECK_MEMBERS} @cvindex HAVE_@var{aggregate}_@var{member} Check for the existence of each @samp{@var{aggregate}.@var{member}} of @var{members} using the previous macro. When @var{member} belongs to @var{aggregate}, define @code{HAVE_@var{aggregate}_@var{member}} (in all capitals, with spaces and dots replaced by underscores). If @var{action-if-found} is given, it is executed for each of the found members. If @var{action-if-not-found} is given, it is executed for each of the members that could not be found. @var{includes} is a series of include directives, defaulting to @code{AC_INCLUDES_DEFAULT} (@pxref{Default Includes}), which are used prior to the members under test. This macro uses M4 lists: @example AC_CHECK_MEMBERS([struct stat.st_rdev, struct stat.st_blksize]) @end example @end defmac @node Types @section Types @cindex Types @cindex C types The following macros check for C types, either builtin or typedefs. If there is no macro specifically defined to check for a type you need, and you don't need to check for any special properties of it, then you can use a general type-check macro. @menu * Particular Types:: Special handling to find certain types * Generic Types:: How to find other types @end menu @node Particular Types @subsection Particular Type Checks @hdrindex{sys/types.h} @hdrindex{stdlib.h} @hdrindex{stdint.h} @hdrindex{inttypes.h} These macros check for particular C types in @file{sys/types.h}, @file{stdlib.h}, @file{stdint.h}, @file{inttypes.h} and others, if they exist. The Gnulib @code{stdint} module is an alternate way to define many of these symbols; it is useful if you prefer your code to assume a C99-or-better environment. @xref{Gnulib}. @anchor{AC_TYPE_GETGROUPS} @defmac AC_TYPE_GETGROUPS @acindex{TYPE_GETGROUPS} @cvindex GETGROUPS_T @caindex type_getgroups Define @code{GETGROUPS_T} to be whichever of @code{gid_t} or @code{int} is the base type of the array argument to @code{getgroups}. This macro caches the base type in the @code{ac_cv_type_getgroups} variable. @end defmac @defmac AC_TYPE_INT8_T @acindex{TYPE_INT8_T} @cvindex HAVE_INT8_T @cvindex int8_t @caindex c_int8_t If @file{stdint.h} or @file{inttypes.h} does not define the type @code{int8_t}, define @code{int8_t} to a signed integer type that is exactly 8 bits wide and that uses two's complement representation, if such a type exists. If you are worried about porting to hosts that lack such a type, you can use the results of this macro in C89-or-later code as follows: @example #if HAVE_STDINT_H # include #endif #if defined INT8_MAX || defined int8_t @emph{code using int8_t} #else @emph{complicated alternative using >8-bit 'signed char'} #endif @end example This macro caches the type in the @code{ac_cv_c_int8_t} variable. @end defmac @defmac AC_TYPE_INT16_T @acindex{TYPE_INT16_T} @cvindex HAVE_INT16_T @cvindex int16_t @caindex c_int16_t This is like @code{AC_TYPE_INT8_T}, except for 16-bit integers. @end defmac @defmac AC_TYPE_INT32_T @acindex{TYPE_INT32_T} @cvindex HAVE_INT32_T @cvindex int32_t @caindex c_int32_t This is like @code{AC_TYPE_INT8_T}, except for 32-bit integers. @end defmac @defmac AC_TYPE_INT64_T @acindex{TYPE_INT64_T} @cvindex HAVE_INT64_T @cvindex int64_t @caindex c_int64_t This is like @code{AC_TYPE_INT8_T}, except for 64-bit integers. @end defmac @defmac AC_TYPE_INTMAX_T @acindex{TYPE_INTMAX_T} @cvindex HAVE_INTMAX_T @cvindex intmax_t @c @caindex type_intmax_t If @file{stdint.h} or @file{inttypes.h} defines the type @code{intmax_t}, define @code{HAVE_INTMAX_T}. Otherwise, define @code{intmax_t} to the widest signed integer type. @end defmac @defmac AC_TYPE_INTPTR_T @acindex{TYPE_INTPTR_T} @cvindex HAVE_INTPTR_T @cvindex intptr_t @c @caindex type_intptr_t If @file{stdint.h} or @file{inttypes.h} defines the type @code{intptr_t}, define @code{HAVE_INTPTR_T}. Otherwise, define @code{intptr_t} to a signed integer type wide enough to hold a pointer, if such a type exists. @end defmac @defmac AC_TYPE_LONG_DOUBLE @acindex{TYPE_LONG_DOUBLE} @cvindex HAVE_LONG_DOUBLE @caindex type_long_double If the C compiler supports a working @code{long double} type, define @code{HAVE_LONG_DOUBLE}. The @code{long double} type might have the same range and precision as @code{double}. This macro caches its result in the @code{ac_cv_type_long_double} variable. This macro is obsolescent, as current C compilers support @code{long double}. New programs need not use this macro. @end defmac @defmac AC_TYPE_LONG_DOUBLE_WIDER @acindex{TYPE_LONG_DOUBLE_WIDER} @cvindex HAVE_LONG_DOUBLE_WIDER @caindex type_long_double_wider If the C compiler supports a working @code{long double} type with more range or precision than the @code{double} type, define @code{HAVE_LONG_DOUBLE_WIDER}. This macro caches its result in the @code{ac_cv_type_long_double_wider} variable. @end defmac @defmac AC_TYPE_LONG_LONG_INT @acindex{TYPE_LONG_LONG_INT} @cvindex HAVE_LONG_LONG_INT @caindex type_long_long_int If the C compiler supports a working @code{long long int} type, define @code{HAVE_LONG_LONG_INT}. However, this test does not test @code{long long int} values in preprocessor @code{#if} expressions, because too many compilers mishandle such expressions. @xref{Preprocessor Arithmetic}. This macro caches its result in the @code{ac_cv_type_long_long_int} variable. @end defmac @defmac AC_TYPE_MBSTATE_T @acindex{TYPE_MBSTATE_T} @cvindex mbstate_t @hdrindex{wchar.h} @caindex type_mbstate_t Define @code{HAVE_MBSTATE_T} if @code{} declares the @code{mbstate_t} type. Also, define @code{mbstate_t} to be a type if @code{} does not declare it. This macro caches its result in the @code{ac_cv_type_mbstate_t} variable. @end defmac @anchor{AC_TYPE_MODE_T} @defmac AC_TYPE_MODE_T @acindex{TYPE_MODE_T} @cvindex mode_t @caindex type_mode_t Define @code{mode_t} to a suitable type, if standard headers do not define it. This macro caches its result in the @code{ac_cv_type_mode_t} variable. @end defmac @anchor{AC_TYPE_OFF_T} @defmac AC_TYPE_OFF_T @acindex{TYPE_OFF_T} @cvindex off_t @caindex type_off_t Define @code{off_t} to a suitable type, if standard headers do not define it. This macro caches its result in the @code{ac_cv_type_off_t} variable. @end defmac @anchor{AC_TYPE_PID_T} @defmac AC_TYPE_PID_T @acindex{TYPE_PID_T} @cvindex pid_t @caindex type_pid_t Define @code{pid_t} to a suitable type, if standard headers do not define it. This macro caches its result in the @code{ac_cv_type_pid_t} variable. @end defmac @anchor{AC_TYPE_SIZE_T} @defmac AC_TYPE_SIZE_T @acindex{TYPE_SIZE_T} @cvindex size_t @caindex type_size_t Define @code{size_t} to a suitable type, if standard headers do not define it. This macro caches its result in the @code{ac_cv_type_size_t} variable. @end defmac @defmac AC_TYPE_SSIZE_T @acindex{TYPE_SSIZE_T} @cvindex ssize_t @caindex type_ssize_t Define @code{ssize_t} to a suitable type, if standard headers do not define it. This macro caches its result in the @code{ac_cv_type_ssize_t} variable. @end defmac @anchor{AC_TYPE_UID_T} @defmac AC_TYPE_UID_T @acindex{TYPE_UID_T} @cvindex uid_t @cvindex gid_t @caindex type_uid_t Define @code{uid_t} and @code{gid_t} to suitable types, if standard headers do not define them. This macro caches its result in the @code{ac_cv_type_uid_t} variable. @end defmac @defmac AC_TYPE_UINT8_T @acindex{TYPE_UINT8_T} @cvindex HAVE_UINT8_T @cvindex uint8_t @caindex c_uint8_t If @file{stdint.h} or @file{inttypes.h} does not define the type @code{uint8_t}, define @code{uint8_t} to an unsigned integer type that is exactly 8 bits wide, if such a type exists. This is like @code{AC_TYPE_INT8_T}, except for unsigned integers. @end defmac @defmac AC_TYPE_UINT16_T @acindex{TYPE_UINT16_T} @cvindex HAVE_UINT16_T @cvindex uint16_t @caindex c_uint16_t This is like @code{AC_TYPE_UINT8_T}, except for 16-bit integers. @end defmac @defmac AC_TYPE_UINT32_T @acindex{TYPE_UINT32_T} @cvindex HAVE_UINT32_T @cvindex uint32_t @caindex c_uint32_t This is like @code{AC_TYPE_UINT8_T}, except for 32-bit integers. @end defmac @defmac AC_TYPE_UINT64_T @acindex{TYPE_UINT64_T} @cvindex HAVE_UINT64_T @cvindex uint64_t @caindex c_uint64_t This is like @code{AC_TYPE_UINT8_T}, except for 64-bit integers. @end defmac @defmac AC_TYPE_UINTMAX_T @acindex{TYPE_UINTMAX_T} @cvindex HAVE_UINTMAX_T @cvindex uintmax_t @c @caindex type_uintmax_t If @file{stdint.h} or @file{inttypes.h} defines the type @code{uintmax_t}, define @code{HAVE_UINTMAX_T}. Otherwise, define @code{uintmax_t} to the widest unsigned integer type. @end defmac @defmac AC_TYPE_UINTPTR_T @acindex{TYPE_UINTPTR_T} @cvindex HAVE_UINTPTR_T @cvindex uintptr_t @c @caindex type_uintptr_t If @file{stdint.h} or @file{inttypes.h} defines the type @code{uintptr_t}, define @code{HAVE_UINTPTR_T}. Otherwise, define @code{uintptr_t} to an unsigned integer type wide enough to hold a pointer, if such a type exists. @end defmac @defmac AC_TYPE_UNSIGNED_LONG_LONG_INT @acindex{TYPE_UNSIGNED_LONG_LONG_INT} @cvindex HAVE_UNSIGNED_LONG_LONG_INT @caindex type_unsigned_long_long_int If the C compiler supports a working @code{unsigned long long int} type, define @code{HAVE_UNSIGNED_LONG_LONG_INT}. However, this test does not test @code{unsigned long long int} values in preprocessor @code{#if} expressions, because too many compilers mishandle such expressions. @xref{Preprocessor Arithmetic}. This macro caches its result in the @code{ac_cv_type_unsigned_long_long_int} variable. @end defmac @node Generic Types @subsection Generic Type Checks These macros are used to check for types not covered by the ``particular'' test macros. @defmac AC_CHECK_TYPE (@var{type}, @ovar{action-if-found}, @ @ovar{action-if-not-found}, @dvar{includes, AC_INCLUDES_DEFAULT}) @acindex{CHECK_TYPE} @caindex type_@var{type} Check whether @var{type} is defined. It may be a compiler builtin type or defined by the @var{includes}. @var{includes} is a series of include directives, defaulting to @code{AC_INCLUDES_DEFAULT} (@pxref{Default Includes}), which are used prior to the type under test. In C, @var{type} must be a type-name, so that the expression @samp{sizeof (@var{type})} is valid (but @samp{sizeof ((@var{type}))} is not). The same test is applied when compiling for C++, which means that in C++ @var{type} should be a type-id and should not be an anonymous @samp{struct} or @samp{union}. This macro caches its result in the @code{ac_cv_type_@var{type}} variable, with @samp{*} mapped to @samp{p} and other characters not suitable for a variable name mapped to underscores. @end defmac @defmac AC_CHECK_TYPES (@var{types}, @ovar{action-if-found}, @ @ovar{action-if-not-found}, @dvar{includes, AC_INCLUDES_DEFAULT}) @acindex{CHECK_TYPES} @cvindex HAVE_@var{type} For each @var{type} of the @var{types} that is defined, define @code{HAVE_@var{type}} (in all capitals). Each @var{type} must follow the rules of @code{AC_CHECK_TYPE}. If no @var{includes} are specified, the default includes are used (@pxref{Default Includes}). If @var{action-if-found} is given, it is additional shell code to execute when one of the types is found. If @var{action-if-not-found} is given, it is executed when one of the types is not found. This macro uses M4 lists: @example AC_CHECK_TYPES([ptrdiff_t]) AC_CHECK_TYPES([unsigned long long int, uintmax_t]) AC_CHECK_TYPES([float_t], [], [], [[#include ]]) @end example @end defmac Autoconf, up to 2.13, used to provide to another version of @code{AC_CHECK_TYPE}, broken by design. In order to keep backward compatibility, a simple heuristic, quite safe but not totally, is implemented. In case of doubt, read the documentation of the former @code{AC_CHECK_TYPE}, see @ref{Obsolete Macros}. @node Compilers and Preprocessors @section Compilers and Preprocessors @cindex Compilers @cindex Preprocessors @ovindex EXEEXT All the tests for compilers (@code{AC_PROG_CC}, @code{AC_PROG_CXX}, @code{AC_PROG_F77}) define the output variable @code{EXEEXT} based on the output of the compiler, typically to the empty string if Posix and @samp{.exe} if a DOS variant. @ovindex OBJEXT They also define the output variable @code{OBJEXT} based on the output of the compiler, after @file{.c} files have been excluded, typically to @samp{o} if Posix, @samp{obj} if a DOS variant. If the compiler being used does not produce executables, the tests fail. If the executables can't be run, and cross-compilation is not enabled, they fail too. @xref{Manual Configuration}, for more on support for cross compiling. @menu * Specific Compiler Characteristics:: Some portability issues * Generic Compiler Characteristics:: Language independent tests and features * C Compiler:: Checking its characteristics * C++ Compiler:: Likewise * Objective C Compiler:: Likewise * Objective C++ Compiler:: Likewise * Erlang Compiler and Interpreter:: Likewise * Fortran Compiler:: Likewise * Go Compiler:: Likewise @end menu @node Specific Compiler Characteristics @subsection Specific Compiler Characteristics Some compilers exhibit different behaviors. @table @asis @item Static/Dynamic Expressions Autoconf relies on a trick to extract one bit of information from the C compiler: using negative array sizes. For instance the following excerpt of a C source demonstrates how to test whether @samp{int} objects are 4 bytes wide: @example static int test_array[sizeof (int) == 4 ? 1 : -1]; @end example @noindent To our knowledge, there is a single compiler that does not support this trick: the HP C compilers (the real ones, not only the ``bundled'') on HP-UX 11.00. They incorrectly reject the above program with the diagnostic ``Variable-length arrays cannot have static storage.'' This bug comes from HP compilers' mishandling of @code{sizeof (int)}, not from the @code{? 1 : -1}, and Autoconf works around this problem by casting @code{sizeof (int)} to @code{long int} before comparing it. @end table @node Generic Compiler Characteristics @subsection Generic Compiler Characteristics @anchor{AC_CHECK_SIZEOF} @defmac AC_CHECK_SIZEOF (@var{type-or-expr}, @ovar{unused}, @ @dvar{includes, AC_INCLUDES_DEFAULT}) @acindex{CHECK_SIZEOF} @cvindex SIZEOF_@var{type-or-expr} @caindex sizeof_@var{type-or-expr} Define @code{SIZEOF_@var{type-or-expr}} (@pxref{Standard Symbols}) to be the size in bytes of @var{type-or-expr}, which may be either a type or an expression returning a value that has a size. If the expression @samp{sizeof (@var{type-or-expr})} is invalid, the result is 0. @var{includes} is a series of include directives, defaulting to @code{AC_INCLUDES_DEFAULT} (@pxref{Default Includes}), which are used prior to the expression under test. This macro now works even when cross-compiling. The @var{unused} argument was used when cross-compiling. For example, the call @example @c If you change this example, adjust tests/semantics.at:AC_CHECK_SIZEOF struct. AC_CHECK_SIZEOF([int *]) @end example @noindent defines @code{SIZEOF_INT_P} to be 8 on DEC Alpha AXP systems. This macro caches its result in the @code{ac_cv_sizeof_@var{type-or-expr}} variable, with @samp{*} mapped to @samp{p} and other characters not suitable for a variable name mapped to underscores. @end defmac @defmac AC_CHECK_ALIGNOF (@var{type}, @dvar{includes, AC_INCLUDES_DEFAULT}) @acindex{CHECK_ALIGNOF} @cvindex ALIGNOF_@var{type} @caindex alignof_@var{type-or-expr} Define @code{ALIGNOF_@var{type}} (@pxref{Standard Symbols}) to be the alignment in bytes of @var{type}. @samp{@var{type} y;} must be valid as a structure member declaration. If @samp{type} is unknown, the result is 0. If no @var{includes} are specified, the default includes are used (@pxref{Default Includes}). This macro caches its result in the @code{ac_cv_alignof_@var{type-or-expr}} variable, with @samp{*} mapped to @samp{p} and other characters not suitable for a variable name mapped to underscores. @end defmac @defmac AC_COMPUTE_INT (@var{var}, @var{expression}, @ @dvar{includes, AC_INCLUDES_DEFAULT}, @ovar{action-if-fails}) @acindex{COMPUTE_INT} Store into the shell variable @var{var} the value of the integer @var{expression}. The value should fit in an initializer in a C variable of type @code{signed long}. To support cross compilation (in which case, the macro only works on hosts that use twos-complement arithmetic), it should be possible to evaluate the expression at compile-time. If no @var{includes} are specified, the default includes are used (@pxref{Default Includes}). Execute @var{action-if-fails} if the value cannot be determined correctly. @end defmac @defmac AC_LANG_WERROR @acindex{LANG_WERROR} Normally Autoconf ignores warnings generated by the compiler, linker, and preprocessor. If this macro is used, warnings count as fatal errors for the current language. This macro is useful when the results of configuration are used where warnings are unacceptable; for instance, if parts of a program are built with the GCC @option{-Werror} option. If the whole program is built using @option{-Werror} it is often simpler to put @option{-Werror} in the compiler flags (@code{CFLAGS}, etc.). @end defmac @defmac AC_OPENMP @acindex{OPENMP} @cvindex _OPENMP @ovindex OPENMP_CFLAGS @ovindex OPENMP_CXXFLAGS @ovindex OPENMP_FFLAGS @ovindex OPENMP_FCFLAGS @caindex prog_c_openmp @caindex prog_cxx_openmp @caindex prog_f77_openmp @caindex prog_fc_openmp @uref{http://@/www.openmp.org/, OpenMP} specifies extensions of C, C++, and Fortran that simplify optimization of shared memory parallelism, which is a common problem on multi-core CPUs. If the current language is C, the macro @code{AC_OPENMP} sets the variable @code{OPENMP_CFLAGS} to the C compiler flags needed for supporting OpenMP@. @code{OPENMP_CFLAGS} is set to empty if the compiler already supports OpenMP, if it has no way to activate OpenMP support, or if the user rejects OpenMP support by invoking @samp{configure} with the @samp{--disable-openmp} option. @code{OPENMP_CFLAGS} needs to be used when compiling programs, when preprocessing program source, and when linking programs. Therefore you need to add @code{$(OPENMP_CFLAGS)} to the @code{CFLAGS} of C programs that use OpenMP@. If you preprocess OpenMP-specific C code, you also need to add @code{$(OPENMP_CFLAGS)} to @code{CPPFLAGS}. The presence of OpenMP support is revealed at compile time by the preprocessor macro @code{_OPENMP}. Linking a program with @code{OPENMP_CFLAGS} typically adds one more shared library to the program's dependencies, so its use is recommended only on programs that actually require OpenMP. If the current language is C++, @code{AC_OPENMP} sets the variable @code{OPENMP_CXXFLAGS}, suitably for the C++ compiler. The same remarks hold as for C. If the current language is Fortran 77 or Fortran, @code{AC_OPENMP} sets the variable @code{OPENMP_FFLAGS} or @code{OPENMP_FCFLAGS}, respectively. Similar remarks as for C hold, except that @code{CPPFLAGS} is not used for Fortran, and no preprocessor macro signals OpenMP support. For portability, it is best to avoid spaces between @samp{#} and @samp{pragma omp}. That is, write @samp{#pragma omp}, not @samp{# pragma omp}. The Sun WorkShop 6.2 C compiler chokes on the latter. This macro caches its result in the @code{ac_cv_prog_c_openmp}, @code{ac_cv_prog_cxx_openmp}, @code{ac_cv_prog_f77_openmp}, or @code{ac_cv_prog_fc_openmp} variable, depending on the current language. @strong{Caution:} Some of the compiler options that @code{AC_OPENMP} tests, mean ``enable OpenMP'' to one compiler, but ``write output to a file named @file{mp} or @file{penmp}'' to other compilers. We cannot guarantee that the implementation of @code{AC_OPENMP} will not overwrite an existing file with either of these names. Therefore, as a defensive measure, a @command{configure} script that uses @code{AC_OPENMP} will issue an error and stop (before doing any of the operations that might overwrite these files) upon encountering either of these files in its working directory. @command{autoconf} will also issue an error if it finds either of these files in the same directory as a @file{configure.ac} that uses @code{AC_OPENMP}. If you have files with either of these names at the top level of your source tree, and you need to use @code{AC_OPENMP}, we recommend you either change their names or move them into a subdirectory. @end defmac @node C Compiler @subsection C Compiler Characteristics The following macros provide ways to find and exercise a C Compiler. There are a few constructs that ought to be avoided, but do not deserve being checked for, since they can easily be worked around. @table @asis @item Don't use lines containing solitary backslashes They tickle a bug in the HP-UX C compiler (checked on HP-UX 10.20, 11.00, and 11i). When given the following source: @example #ifdef __STDC__ /\ * A comment with backslash-newlines in it. %@{ %@} *\ \ / char str[] = "\\ " A string with backslash-newlines in it %@{ %@} \\ ""; char apostrophe = '\\ \ '\ '; #endif @end example @noindent the compiler incorrectly fails with the diagnostics ``Non-terminating comment at end of file'' and ``Missing @samp{#endif} at end of file.'' Removing the lines with solitary backslashes solves the problem. @item Don't compile several files at once if output matters to you Some compilers, such as HP's, report names of files being compiled when given more than one file operand. For instance: @example $ @kbd{cc a.c b.c} a.c: b.c: @end example @noindent This can cause problems if you observe the output of the compiler to detect failures. Invoking @samp{cc -c a.c && cc -c b.c && cc -o c a.o b.o} solves the issue. @item Don't rely on @code{#error} failing The IRIX C compiler does not fail when #error is preprocessed; it simply emits a diagnostic and continues, exiting successfully. So, instead of an error directive like @code{#error "Unsupported word size"} it is more portable to use an invalid directive like @code{#Unsupported word size} in Autoconf tests. In ordinary source code, @code{#error} is OK, since installers with inadequate compilers like IRIX can simply examine these compilers' diagnostic output. @item Don't rely on correct @code{#line} support On Solaris, @command{c89} (at least Sun C 5.3 through 5.8) diagnoses @code{#line} directives whose line numbers are greater than 32767. Nothing in Posix makes this invalid. That is why Autoconf stopped issuing @code{#line} directives. @end table @anchor{AC_PROG_CC} @defmac AC_PROG_CC (@ovar{compiler-search-list}) @acindex{PROG_CC} @evindex CC @evindex CFLAGS @ovindex CC @ovindex CFLAGS @caindex prog_cc_stdc Determine a C compiler to use. If @code{CC} is not already set in the environment, check for @code{gcc} and @code{cc}, then for other C compilers. Set output variable @code{CC} to the name of the compiler found. This macro may, however, be invoked with an optional first argument which, if specified, must be a blank-separated list of C compilers to search for. This just gives the user an opportunity to specify an alternative search list for the C compiler. For example, if you didn't like the default order, then you could invoke @code{AC_PROG_CC} like this: @example AC_PROG_CC([gcc cl cc]) @end example If necessary, add an option to output variable @code{CC} to enable support for ISO Standard C features with extensions. Prefer the newest C standard that is supported. Currently the newest standard is ISO C11, with ISO C99 and ANSI C89 (ISO C90) being the older versions. After calling this macro you can check whether the C compiler has been set to accept Standard C; if not, the shell variable @code{ac_cv_prog_cc_stdc} is set to @samp{no}. When attempting to add compiler options, prefer extended functionality to strict conformance: the goal is to enable whatever standard features that are available, not to check for full conformance to the standard or to prohibit incompatible extensions. Test for C11 support by checking for @code{_Alignas}, @code{_Alignof}, @code{_Noreturn}, @code{_Static_assert}, UTF-8 string literals, duplicate @code{typedef}s, and anonymous structures and unions. Test for C99 support by checking for @code{_Bool}, @code{//} comments, flexible array members, @code{inline}, signed and unsigned @code{long long int}, mixed code and declarations, named initialization of structs, @code{restrict}, @code{va_copy}, varargs macros, variable declarations in @code{for} loops, and variable length arrays. Test for C89 support by checking for function prototypes. If using a compiler that supports GNU C, set shell variable @code{GCC} to @samp{yes}. If output variable @code{CFLAGS} was not already set, set it to @option{-g -O2} for a GNU C compiler (@option{-O2} on systems where the compiler does not accept @option{-g}), or @option{-g} for other compilers. If your package does not like this default, then it is acceptable to insert the line @samp{: $@{CFLAGS=""@}} after @code{AC_INIT} and before @code{AC_PROG_CC} to select an empty default instead. Many Autoconf macros use a compiler, and thus call @samp{AC_REQUIRE([AC_PROG_CC])} to ensure that the compiler has been determined before the body of the outermost @code{AC_DEFUN} macro. @code{AC_PROG_CC} is therefore defined via @code{AC_DEFUN_ONCE} to avoid needless reexpansion (@pxref{One-Shot Macros}). @end defmac @anchor{AC_PROG_CC_C_O} @defmac AC_PROG_CC_C_O @acindex{PROG_CC_C_O} @cvindex NO_MINUS_C_MINUS_O @caindex prog_cc_@var{compiler}_c_o If the C compiler does not accept the @option{-c} and @option{-o} options simultaneously, define @code{NO_MINUS_C_MINUS_O}. This macro actually tests both the compiler found by @code{AC_PROG_CC}, and, if different, the first @code{cc} in the path. The test fails if one fails. This macro was created for GNU Make to choose the default C compilation rule. For the compiler @var{compiler}, this macro caches its result in the @code{ac_cv_prog_cc_@var{compiler}_c_o} variable. @end defmac @defmac AC_PROG_CPP @acindex{PROG_CPP} @evindex CPP @ovindex CPP Set output variable @code{CPP} to a command that runs the C preprocessor. If @samp{$CC -E} doesn't work, tries @code{cpp} and @file{/lib/cpp}, in that order. It is only portable to run @code{CPP} on files with a @file{.c} extension. Some preprocessors don't indicate missing include files by the error status. For such preprocessors an internal variable is set that causes other macros to check the standard error from the preprocessor and consider the test failed if any warnings have been reported. For most preprocessors, though, warnings do not cause include-file tests to fail unless @code{AC_PROG_CPP_WERROR} is also specified. @end defmac @defmac AC_PROG_CPP_WERROR @acindex{PROG_CPP_WERROR} @ovindex CPP This acts like @code{AC_PROG_CPP}, except it treats warnings from the preprocessor as errors even if the preprocessor exit status indicates success. This is useful for avoiding headers that generate mandatory warnings, such as deprecation notices. @end defmac The following macros check for C compiler or machine architecture features. To check for characteristics not listed here, use @code{AC_COMPILE_IFELSE} (@pxref{Running the Compiler}) or @code{AC_RUN_IFELSE} (@pxref{Runtime}). @defmac AC_C_BACKSLASH_A @acindex{C_BACKSLASH_A} @cvindex HAVE_C_BACKSLASH_A Define @samp{HAVE_C_BACKSLASH_A} to 1 if the C compiler understands @samp{\a}. This macro is obsolescent, as current C compilers understand @samp{\a}. New programs need not use this macro. @end defmac @anchor{AC_C_BIGENDIAN} @defmac AC_C_BIGENDIAN (@ovar{action-if-true}, @ovar{action-if-false}, @ @ovar{action-if-unknown}, @ovar{action-if-universal}) @acindex{C_BIGENDIAN} @cvindex WORDS_BIGENDIAN @cindex Endianness If words are stored with the most significant byte first (like Motorola and SPARC CPUs), execute @var{action-if-true}. If words are stored with the least significant byte first (like Intel and VAX CPUs), execute @var{action-if-false}. This macro runs a test-case if endianness cannot be determined from the system header files. When cross-compiling, the test-case is not run but grep'ed for some magic values. @var{action-if-unknown} is executed if the latter case fails to determine the byte sex of the host system. In some cases a single run of a compiler can generate code for multiple architectures. This can happen, for example, when generating Mac OS X universal binary files, which work on both PowerPC and Intel architectures. In this case, the different variants might be for architectures with differing endianness. If @command{configure} detects this, it executes @var{action-if-universal} instead of @var{action-if-unknown}. The default for @var{action-if-true} is to define @samp{WORDS_BIGENDIAN}. The default for @var{action-if-false} is to do nothing. The default for @var{action-if-unknown} is to abort configure and tell the installer how to bypass this test. And finally, the default for @var{action-if-universal} is to ensure that @samp{WORDS_BIGENDIAN} is defined if and only if a universal build is detected and the current code is big-endian; this default works only if @command{autoheader} is used (@pxref{autoheader Invocation}). If you use this macro without specifying @var{action-if-universal}, you should also use @code{AC_CONFIG_HEADERS}; otherwise @samp{WORDS_BIGENDIAN} may be set incorrectly for Mac OS X universal binary files. @end defmac @anchor{AC_C_CONST} @defmac AC_C_CONST @acindex{C_CONST} @cvindex const @caindex c_const If the C compiler does not fully support the @code{const} keyword, define @code{const} to be empty. Some C compilers that do not define @code{__STDC__} do support @code{const}; some compilers that define @code{__STDC__} do not completely support @code{const}. Programs can simply use @code{const} as if every C compiler supported it; for those that don't, the makefile or configuration header file defines it as empty. Occasionally installers use a C++ compiler to compile C code, typically because they lack a C compiler. This causes problems with @code{const}, because C and C++ treat @code{const} differently. For example: @example const int foo; @end example @noindent is valid in C but not in C++. These differences unfortunately cannot be papered over by defining @code{const} to be empty. If @command{autoconf} detects this situation, it leaves @code{const} alone, as this generally yields better results in practice. However, using a C++ compiler to compile C code is not recommended or supported, and installers who run into trouble in this area should get a C compiler like GCC to compile their C code. This macro caches its result in the @code{ac_cv_c_const} variable. This macro is obsolescent, as current C compilers support @code{const}. New programs need not use this macro. @end defmac @defmac AC_C__GENERIC @acindex{C__GENERIC} @cvindex _Generic If the C compiler supports C11-style generic selection using the @code{_Generic} keyword, define @code{HAVE_C__GENERIC}. @end defmac @defmac AC_C_RESTRICT @acindex{C_RESTRICT} @cvindex restrict @caindex c_restrict If the C compiler recognizes a variant spelling for the @code{restrict} keyword (@code{__restrict}, @code{__restrict__}, or @code{_Restrict}), then define @code{restrict} to that; this is more likely to do the right thing with compilers that support language variants where plain @code{restrict} is not a keyword. Otherwise, if the C compiler recognizes the @code{restrict} keyword, don't do anything. Otherwise, define @code{restrict} to be empty. Thus, programs may simply use @code{restrict} as if every C compiler supported it; for those that do not, the makefile or configuration header defines it away. Although support in C++ for the @code{restrict} keyword is not required, several C++ compilers do accept the keyword. This macro works for them, too. This macro caches @samp{no} in the @code{ac_cv_c_restrict} variable if @code{restrict} is not supported, and a supported spelling otherwise. @end defmac @defmac AC_C_VOLATILE @acindex{C_VOLATILE} @cvindex volatile If the C compiler does not understand the keyword @code{volatile}, define @code{volatile} to be empty. Programs can simply use @code{volatile} as if every C compiler supported it; for those that do not, the makefile or configuration header defines it as empty. If the correctness of your program depends on the semantics of @code{volatile}, simply defining it to be empty does, in a sense, break your code. However, given that the compiler does not support @code{volatile}, you are at its mercy anyway. At least your program compiles, when it wouldn't before. @xref{Volatile Objects}, for more about @code{volatile}. In general, the @code{volatile} keyword is a standard C feature, so you might expect that @code{volatile} is available only when @code{__STDC__} is defined. However, Ultrix 4.3's native compiler does support volatile, but does not define @code{__STDC__}. This macro is obsolescent, as current C compilers support @code{volatile}. New programs need not use this macro. @end defmac @anchor{AC_C_INLINE} @defmac AC_C_INLINE @acindex{C_INLINE} @cvindex inline If the C compiler supports the keyword @code{inline}, do nothing. Otherwise define @code{inline} to @code{__inline__} or @code{__inline} if it accepts one of those, otherwise define @code{inline} to be empty. @end defmac @anchor{AC_C_CHAR_UNSIGNED} @defmac AC_C_CHAR_UNSIGNED @acindex{C_CHAR_UNSIGNED} @cvindex __CHAR_UNSIGNED__ If the C type @code{char} is unsigned, define @code{__CHAR_UNSIGNED__}, unless the C compiler predefines it. These days, using this macro is not necessary. The same information can be determined by this portable alternative, thus avoiding the use of preprocessor macros in the namespace reserved for the implementation. @example #include #if CHAR_MIN == 0 # define CHAR_UNSIGNED 1 #endif @end example @end defmac @defmac AC_C_STRINGIZE @acindex{C_STRINGIZE} @cvindex HAVE_STRINGIZE If the C preprocessor supports the stringizing operator, define @code{HAVE_STRINGIZE}. The stringizing operator is @samp{#} and is found in macros such as this: @example #define x(y) #y @end example This macro is obsolescent, as current C compilers support the stringizing operator. New programs need not use this macro. @end defmac @defmac AC_C_FLEXIBLE_ARRAY_MEMBER @acindex{C_FLEXIBLE_ARRAY_MEMBER} @cvindex FLEXIBLE_ARRAY_MEMBER If the C compiler supports flexible array members, define @code{FLEXIBLE_ARRAY_MEMBER} to nothing; otherwise define it to 1. That way, a declaration like this: @example struct s @{ size_t n_vals; double val[FLEXIBLE_ARRAY_MEMBER]; @}; @end example @noindent will let applications use the ``struct hack'' even with compilers that do not support flexible array members. To allocate and use such an object, you can use code like this: @example size_t i; size_t n = compute_value_count (); struct s *p = malloc (offsetof (struct s, val) + n * sizeof (double)); p->n_vals = n; for (i = 0; i < n; i++) p->val[i] = compute_value (i); @end example @end defmac @defmac AC_C_VARARRAYS @acindex{C_VARARRAYS} @cvindex __STDC_NO_VLA__ @cvindex HAVE_C_VARARRAYS If the C compiler does not support variable-length arrays, define the macro @code{__STDC_NO_VLA__} to be 1 if it is not already defined. A variable-length array is an array of automatic storage duration whose length is determined at run time, when the array is declared. For backward compatibility this macro also defines @code{HAVE_C_VARARRAYS} if the C compiler supports variable-length arrays, but this usage is obsolescent and new programs should use @code{__STDC_NO_VLA__}. @end defmac @defmac AC_C_TYPEOF @acindex{C_TYPEOF} @cvindex HAVE_TYPEOF @cvindex typeof If the C compiler supports GNU C's @code{typeof} syntax either directly or through a different spelling of the keyword (e.g., @code{__typeof__}), define @code{HAVE_TYPEOF}. If the support is available only through a different spelling, define @code{typeof} to that spelling. @end defmac @defmac AC_C_PROTOTYPES @acindex{C_PROTOTYPES} @cvindex PROTOTYPES @cvindex __PROTOTYPES @cvindex PARAMS If function prototypes are understood by the compiler (as determined by @code{AC_PROG_CC}), define @code{PROTOTYPES} and @code{__PROTOTYPES}. Defining @code{__PROTOTYPES} is for the benefit of header files that cannot use macros that infringe on user name space. This macro is obsolescent, as current C compilers support prototypes. New programs need not use this macro. @end defmac @anchor{AC_PROG_GCC_TRADITIONAL} @defmac AC_PROG_GCC_TRADITIONAL @acindex{PROG_GCC_TRADITIONAL} @ovindex CC Add @option{-traditional} to output variable @code{CC} if using a GNU C compiler and @code{ioctl} does not work properly without @option{-traditional}. That usually happens when the fixed header files have not been installed on an old system. This macro is obsolescent, since current versions of the GNU C compiler fix the header files automatically when installed. @end defmac @node C++ Compiler @subsection C++ Compiler Characteristics @defmac AC_PROG_CXX (@ovar{compiler-search-list}) @acindex{PROG_CXX} @evindex CXX @evindex CXXFLAGS @ovindex CXX @ovindex CXXFLAGS Determine a C++ compiler to use. If either the environment variable @code{CXX} or the environment variable @code{CCC} is set, its value will be taken as the name of a C++ compiler. If both are set, @code{CXX} is preferred. If neither are set, search for a C++ compiler under a series of likely names, trying @code{g++} and @code{c++} first. Regardless, the output variable @code{CXX} is set to the chosen compiler. If the optional first argument to the macro is used, it must be a whitespace-separated list of potential names for a C++ compiler, which overrides the built-in list. If no C++ compiler can be found, as a last resort @code{CXX} is set to @code{g++} (and subsequent tests will probably fail). If the selected C++ compiler is found to be GNU C++ (regardless of its name), the shell variable @code{GXX} will be set to @samp{yes}. If the shell variable @code{CXXFLAGS} was not already set, it is set to @option{-g -O2} for the GNU C++ compiler (@option{-O2} on systems where G++ does not accept @option{-g}), or @option{-g} for other compilers. @code{CXXFLAGS} is then made an output variable. You can override the default for @code{CXXFLAGS} by inserting a shell default assignment between @code{AC_INIT} and @code{AC_PROG_CXX}: @example : $@{CXXFLAGS="@var{options}"@} @end example where @var{options} are the appropriate set of options to use by default. (It is important to use this construct rather than a normal assignment, so that @code{CXXFLAGS} can still be overridden by the person building the package. @xref{Preset Output Variables}.) If necessary, options are added to @code{CXX} to enable support for ISO Standard C++ features with extensions. ISO C++ 2011 is preferred if the compiler supports it. After calling this macro, you can check whether the C++ compiler has been set to accept standard C++ by inspecting cache variables. If @code{ac_cv_prog_cxx_cxx11} is set to any value other than @samp{no} (including the empty string), then @code{CXX} can compile code as standard C++ 2011, and this mode has been enabled. Otherwise, if @code{ac_cv_prog_cxx_cxx98} is set to any value other than @samp{no} (including the empty string), then @code{CXX} can compile code as standard C++ 1998, and this mode has been enabled. Finally, if both variables are set to @samp{no}, then @code{CXX} cannot compile standard C++ at all. The tests for standard conformance are not comprehensive. They test the value of @code{__cplusplus} and a representative sample of the language features added in each version of the C++ standard. They do not exercise the C++ standard library, because this can be extremely slow. If you need to know whether a particular C++ standard header exists, use @code{AC_CHECK_HEADER}. None of the options that may be added to @code{CXX} by this macro enable @emph{strict} conformance to the C++ standard. In particular, system-specific extensions are not disabled. (For example, for GNU C++, the @option{-std=gnu++@var{nn}} options may be used, but not the @option{-std=c++@var{nn}} options.) @end defmac @defmac AC_PROG_CXXCPP @acindex{PROG_CXXCPP} @evindex CXXCPP @ovindex CXXCPP Set output variable @code{CXXCPP} to a command that runs the C++ preprocessor. If @samp{$CXX -E} doesn't work, tries @code{cpp} and @file{/lib/cpp}, in that order. Because of this fallback, @code{CXXCPP} may or may not set C++-specific predefined macros (such as @code{__cplusplus}). It is portable to run @code{CXXCPP} only on files with a @file{.c}, @file{.C}, @file{.cc}, or @file{.cpp} extension. Some preprocessors don't indicate missing include files by the error status. For such preprocessors an internal variable is set that causes other macros to check the standard error from the preprocessor and consider the test failed if any warnings have been reported. However, it is not known whether such broken preprocessors exist for C++. @end defmac @defmac AC_PROG_CXX_C_O @acindex{PROG_CXX_C_O} @cvindex CXX_NO_MINUS_C_MINUS_O Test whether the C++ compiler accepts the options @option{-c} and @option{-o} simultaneously, and define @code{CXX_NO_MINUS_C_MINUS_O}, if it does not. @end defmac @node Objective C Compiler @subsection Objective C Compiler Characteristics @defmac AC_PROG_OBJC (@ovar{compiler-search-list}) @acindex{PROG_OBJC} @evindex OBJC @evindex OBJCFLAGS @ovindex OBJC @ovindex OBJCFLAGS Determine an Objective C compiler to use. If @code{OBJC} is not already set in the environment, check for Objective C compilers. Set output variable @code{OBJC} to the name of the compiler found. This macro may, however, be invoked with an optional first argument which, if specified, must be a blank-separated list of Objective C compilers to search for. This just gives the user an opportunity to specify an alternative search list for the Objective C compiler. For example, if you didn't like the default order, then you could invoke @code{AC_PROG_OBJC} like this: @example AC_PROG_OBJC([gcc objcc objc]) @end example If using a compiler that supports GNU Objective C, set shell variable @code{GOBJC} to @samp{yes}. If output variable @code{OBJCFLAGS} was not already set, set it to @option{-g -O2} for a GNU Objective C compiler (@option{-O2} on systems where the compiler does not accept @option{-g}), or @option{-g} for other compilers. @end defmac @defmac AC_PROG_OBJCPP @acindex{PROG_OBJCPP} @evindex OBJCPP @ovindex OBJCPP Set output variable @code{OBJCPP} to a command that runs the Objective C preprocessor. If @samp{$OBJC -E} doesn't work, tries @code{cpp} and @file{/lib/cpp}, in that order. Because of this fallback, @code{CXXCPP} may or may not set Objective-C-specific predefined macros (such as @code{__OBJC__}). @end defmac @node Objective C++ Compiler @subsection Objective C++ Compiler Characteristics @defmac AC_PROG_OBJCXX (@ovar{compiler-search-list}) @acindex{PROG_OBJCXX} @evindex OBJCXX @evindex OBJCXXFLAGS @ovindex OBJCXX @ovindex OBJCXXFLAGS Determine an Objective C++ compiler to use. If @code{OBJCXX} is not already set in the environment, check for Objective C++ compilers. Set output variable @code{OBJCXX} to the name of the compiler found. This macro may, however, be invoked with an optional first argument which, if specified, must be a blank-separated list of Objective C++ compilers to search for. This just gives the user an opportunity to specify an alternative search list for the Objective C++ compiler. For example, if you didn't like the default order, then you could invoke @code{AC_PROG_OBJCXX} like this: @example AC_PROG_OBJCXX([gcc g++ objcc++ objcxx]) @end example If using a compiler that supports GNU Objective C++, set shell variable @code{GOBJCXX} to @samp{yes}. If output variable @code{OBJCXXFLAGS} was not already set, set it to @option{-g -O2} for a GNU Objective C++ compiler (@option{-O2} on systems where the compiler does not accept @option{-g}), or @option{-g} for other compilers. @end defmac @defmac AC_PROG_OBJCXXCPP @acindex{PROG_OBJCXXCPP} @evindex OBJCXXCPP @ovindex OBJCXXCPP Set output variable @code{OBJCXXCPP} to a command that runs the Objective C++ preprocessor. If @samp{$OBJCXX -E} doesn't work, tries @code{cpp} and @file{/lib/cpp}, in that order. Because of this fallback, @code{CXXCPP} may or may not set Objective-C++-specific predefined macros (such as @code{__cplusplus} and @code{__OBJC__}). @end defmac @node Erlang Compiler and Interpreter @subsection Erlang Compiler and Interpreter Characteristics @cindex Erlang Autoconf defines the following macros for determining paths to the essential Erlang/OTP programs: @defmac AC_ERLANG_PATH_ERLC (@ovar{value-if-not-found}, @dvar{path, $PATH}) @acindex{ERLANG_PATH_ERLC} @evindex ERLC @evindex ERLCFLAGS @ovindex ERLC @ovindex ERLCFLAGS Determine an Erlang compiler to use. If @code{ERLC} is not already set in the environment, check for @command{erlc}. Set output variable @code{ERLC} to the complete path of the compiler command found. In addition, if @code{ERLCFLAGS} is not set in the environment, set it to an empty value. The two optional arguments have the same meaning as the two last arguments of macro @code{AC_PATH_PROG} for looking for the @command{erlc} program. For example, to look for @command{erlc} only in the @file{/usr/lib/erlang/bin} directory: @example AC_ERLANG_PATH_ERLC([not found], [/usr/lib/erlang/bin]) @end example @end defmac @defmac AC_ERLANG_NEED_ERLC (@dvar{path, $PATH}) @acindex{ERLANG_NEED_ERLC} A simplified variant of the @code{AC_ERLANG_PATH_ERLC} macro, that prints an error message and exits the @command{configure} script if the @command{erlc} program is not found. @end defmac @defmac AC_ERLANG_PATH_ERL (@ovar{value-if-not-found}, @dvar{path, $PATH}) @acindex{ERLANG_PATH_ERL} @evindex ERL @ovindex ERL Determine an Erlang interpreter to use. If @code{ERL} is not already set in the environment, check for @command{erl}. Set output variable @code{ERL} to the complete path of the interpreter command found. The two optional arguments have the same meaning as the two last arguments of macro @code{AC_PATH_PROG} for looking for the @command{erl} program. For example, to look for @command{erl} only in the @file{/usr/lib/erlang/bin} directory: @example AC_ERLANG_PATH_ERL([not found], [/usr/lib/erlang/bin]) @end example @end defmac @defmac AC_ERLANG_NEED_ERL (@dvar{path, $PATH}) @acindex{ERLANG_NEED_ERL} A simplified variant of the @code{AC_ERLANG_PATH_ERL} macro, that prints an error message and exits the @command{configure} script if the @command{erl} program is not found. @end defmac @node Fortran Compiler @subsection Fortran Compiler Characteristics @cindex Fortran @cindex F77 The Autoconf Fortran support is divided into two categories: legacy Fortran 77 macros (@code{F77}), and modern Fortran macros (@code{FC}). The former are intended for traditional Fortran 77 code, and have output variables like @code{F77}, @code{FFLAGS}, and @code{FLIBS}. The latter are for newer programs that can (or must) compile under the newer Fortran standards, and have output variables like @code{FC}, @code{FCFLAGS}, and @code{FCLIBS}. Except for the macros @code{AC_FC_SRCEXT}, @code{AC_FC_FREEFORM}, @code{AC_FC_FIXEDFORM}, and @code{AC_FC_LINE_LENGTH} (see below), the @code{FC} and @code{F77} macros behave almost identically, and so they are documented together in this section. @defmac AC_PROG_F77 (@ovar{compiler-search-list}) @acindex{PROG_F77} @evindex F77 @evindex FFLAGS @ovindex F77 @ovindex FFLAGS @caindex f77_compiler_gnu @caindex prog_f77_g Determine a Fortran 77 compiler to use. If @code{F77} is not already set in the environment, then check for @code{g77} and @code{f77}, and then some other names. Set the output variable @code{F77} to the name of the compiler found. This macro may, however, be invoked with an optional first argument which, if specified, must be a blank-separated list of Fortran 77 compilers to search for. This just gives the user an opportunity to specify an alternative search list for the Fortran 77 compiler. For example, if you didn't like the default order, then you could invoke @code{AC_PROG_F77} like this: @example AC_PROG_F77([fl32 f77 fort77 xlf g77 f90 xlf90]) @end example If using a compiler that supports GNU Fortran 77, set the shell variable @code{G77} to @samp{yes}. If the output variable @code{FFLAGS} was not already set in the environment, set it to @option{-g -02} for @code{g77} (or @option{-O2} where the GNU Fortran 77 compiler does not accept @option{-g}), or @option{-g} for other compilers. The result of the GNU test is cached in the @code{ac_cv_f77_compiler_gnu} variable, acceptance of @option{-g} in the @code{ac_cv_prog_f77_g} variable. @end defmac @defmac AC_PROG_FC (@ovar{compiler-search-list}, @ovar{dialect}) @acindex{PROG_FC} @evindex FC @evindex FCFLAGS @ovindex FC @ovindex FCFLAGS @caindex fc_compiler_gnu @caindex prog_fc_g Determine a Fortran compiler to use. If @code{FC} is not already set in the environment, then @code{dialect} is a hint to indicate what Fortran dialect to search for; the default is to search for the newest available dialect. Set the output variable @code{FC} to the name of the compiler found. By default, newer dialects are preferred over older dialects, but if @code{dialect} is specified then older dialects are preferred starting with the specified dialect. @code{dialect} can currently be one of Fortran 77, Fortran 90, or Fortran 95. However, this is only a hint of which compiler @emph{name} to prefer (e.g., @code{f90} or @code{f95}), and no attempt is made to guarantee that a particular language standard is actually supported. Thus, it is preferable that you avoid the @code{dialect} option, and use AC_PROG_FC only for code compatible with the latest Fortran standard. This macro may, alternatively, be invoked with an optional first argument which, if specified, must be a blank-separated list of Fortran compilers to search for, just as in @code{AC_PROG_F77}. If using a compiler that supports GNU Fortran, set the shell variable @code{GFC} to @samp{yes}. If the output variable @code{FCFLAGS} was not already set in the environment, then set it to @option{-g -02} for a GNU Fortran compiler (or @option{-O2} where the compiler does not accept @option{-g}), or @option{-g} for other compilers. The result of the GNU test is cached in the @code{ac_cv_fc_compiler_gnu} variable, acceptance of @option{-g} in the @code{ac_cv_prog_fc_g} variable. @end defmac @defmac AC_PROG_F77_C_O @defmacx AC_PROG_FC_C_O @acindex{PROG_F77_C_O} @acindex{PROG_FC_C_O} @cvindex F77_NO_MINUS_C_MINUS_O @cvindex FC_NO_MINUS_C_MINUS_O @caindex prog_f77_c_o @caindex prog_fc_c_o Test whether the Fortran compiler accepts the options @option{-c} and @option{-o} simultaneously, and define @code{F77_NO_MINUS_C_MINUS_O} or @code{FC_NO_MINUS_C_MINUS_O}, respectively, if it does not. The result of the test is cached in the @code{ac_cv_prog_f77_c_o} or @code{ac_cv_prog_fc_c_o} variable, respectively. @end defmac The following macros check for Fortran compiler characteristics. To check for characteristics not listed here, use @code{AC_COMPILE_IFELSE} (@pxref{Running the Compiler}) or @code{AC_RUN_IFELSE} (@pxref{Runtime}), making sure to first set the current language to Fortran 77 or Fortran via @code{AC_LANG([Fortran 77])} or @code{AC_LANG(Fortran)} (@pxref{Language Choice}). @defmac AC_F77_LIBRARY_LDFLAGS @defmacx AC_FC_LIBRARY_LDFLAGS @acindex{F77_LIBRARY_LDFLAGS} @ovindex FLIBS @acindex{FC_LIBRARY_LDFLAGS} @ovindex FCLIBS @caindex prog_f77_v @caindex prog_fc_v @caindex f77_libs @caindex fc_libs Determine the linker flags (e.g., @option{-L} and @option{-l}) for the @dfn{Fortran intrinsic and runtime libraries} that are required to successfully link a Fortran program or shared library. The output variable @code{FLIBS} or @code{FCLIBS} is set to these flags (which should be included after @code{LIBS} when linking). This macro is intended to be used in those situations when it is necessary to mix, e.g., C++ and Fortran source code in a single program or shared library (@pxref{Mixing Fortran 77 With C and C++, , , automake, GNU Automake}). For example, if object files from a C++ and Fortran compiler must be linked together, then the C++ compiler/linker must be used for linking (since special C++-ish things need to happen at link time like calling global constructors, instantiating templates, enabling exception support, etc.). However, the Fortran intrinsic and runtime libraries must be linked in as well, but the C++ compiler/linker doesn't know by default how to add these Fortran 77 libraries. Hence, this macro was created to determine these Fortran libraries. The macros @code{AC_F77_DUMMY_MAIN} and @code{AC_FC_DUMMY_MAIN} or @code{AC_F77_MAIN} and @code{AC_FC_MAIN} are probably also necessary to link C/C++ with Fortran; see below. Further, it is highly recommended that you use @code{AC_CONFIG_HEADERS} (@pxref{Configuration Headers}) because the complex defines that the function wrapper macros create may not work with C/C++ compiler drivers. These macros internally compute the flag needed to verbose linking output and cache it in @code{ac_cv_prog_f77_v} or @code{ac_cv_prog_fc_v} variables, respectively. The computed linker flags are cached in @code{ac_cv_f77_libs} or @code{ac_cv_fc_libs}, respectively. @end defmac @defmac AC_F77_DUMMY_MAIN (@ovar{action-if-found}, @ @dvar{action-if-not-found, AC_MSG_FAILURE}) @defmacx AC_FC_DUMMY_MAIN (@ovar{action-if-found}, @ @dvar{action-if-not-found, AC_MSG_FAILURE}) @acindex{F77_DUMMY_MAIN} @cvindex F77_DUMMY_MAIN @acindex{FC_DUMMY_MAIN} @cvindex FC_DUMMY_MAIN @caindex f77_dummy_main @caindex fc_dummy_main With many compilers, the Fortran libraries detected by @code{AC_F77_LIBRARY_LDFLAGS} or @code{AC_FC_LIBRARY_LDFLAGS} provide their own @code{main} entry function that initializes things like Fortran I/O, and which then calls a user-provided entry function named (say) @code{MAIN__} to run the user's program. The @code{AC_F77_DUMMY_MAIN} and @code{AC_FC_DUMMY_MAIN} or @code{AC_F77_MAIN} and @code{AC_FC_MAIN} macros figure out how to deal with this interaction. When using Fortran for purely numerical functions (no I/O, etc.)@: often one prefers to provide one's own @code{main} and skip the Fortran library initializations. In this case, however, one may still need to provide a dummy @code{MAIN__} routine in order to prevent linking errors on some systems. @code{AC_F77_DUMMY_MAIN} or @code{AC_FC_DUMMY_MAIN} detects whether any such routine is @emph{required} for linking, and what its name is; the shell variable @code{F77_DUMMY_MAIN} or @code{FC_DUMMY_MAIN} holds this name, @code{unknown} when no solution was found, and @code{none} when no such dummy main is needed. By default, @var{action-if-found} defines @code{F77_DUMMY_MAIN} or @code{FC_DUMMY_MAIN} to the name of this routine (e.g., @code{MAIN__}) @emph{if} it is required. @var{action-if-not-found} defaults to exiting with an error. In order to link with Fortran routines, the user's C/C++ program should then include the following code to define the dummy main if it is needed: @example @c If you change this example, adjust tests/fortran.at:AC_F77_DUMMY_MAIN usage. #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN () @{ return 1; @} #endif @end example (Replace @code{F77} with @code{FC} for Fortran instead of Fortran 77.) Note that this macro is called automatically from @code{AC_F77_WRAPPERS} or @code{AC_FC_WRAPPERS}; there is generally no need to call it explicitly unless one wants to change the default actions. The result of this macro is cached in the @code{ac_cv_f77_dummy_main} or @code{ac_cv_fc_dummy_main} variable, respectively. @end defmac @defmac AC_F77_MAIN @defmacx AC_FC_MAIN @acindex{F77_MAIN} @cvindex F77_MAIN @acindex{FC_MAIN} @cvindex FC_MAIN @caindex f77_main @caindex fc_main As discussed above, many Fortran libraries allow you to provide an entry point called (say) @code{MAIN__} instead of the usual @code{main}, which is then called by a @code{main} function in the Fortran libraries that initializes things like Fortran I/O@. The @code{AC_F77_MAIN} and @code{AC_FC_MAIN} macros detect whether it is @emph{possible} to utilize such an alternate main function, and defines @code{F77_MAIN} and @code{FC_MAIN} to the name of the function. (If no alternate main function name is found, @code{F77_MAIN} and @code{FC_MAIN} are simply defined to @code{main}.) Thus, when calling Fortran routines from C that perform things like I/O, one should use this macro and declare the "main" function like so: @example @c If you change this example, adjust tests/fortran.at:AC_F77_DUMMY_MAIN usage. #ifdef __cplusplus extern "C" #endif int F77_MAIN (int argc, char *argv[]); @end example (Again, replace @code{F77} with @code{FC} for Fortran instead of Fortran 77.) The result of this macro is cached in the @code{ac_cv_f77_main} or @code{ac_cv_fc_main} variable, respectively. @end defmac @defmac AC_F77_WRAPPERS @defmacx AC_FC_WRAPPERS @acindex{F77_WRAPPERS} @cvindex F77_FUNC @cvindex F77_FUNC_ @acindex{FC_WRAPPERS} @cvindex FC_FUNC @cvindex FC_FUNC_ @caindex f77_mangling @caindex fc_mangling Defines C macros @code{F77_FUNC (name, NAME)}, @code{FC_FUNC (name, NAME)}, @code{F77_FUNC_(name, NAME)}, and @code{FC_FUNC_(name, NAME)} to properly mangle the names of C/C++ identifiers, and identifiers with underscores, respectively, so that they match the name-mangling scheme used by the Fortran compiler. Fortran is case-insensitive, and in order to achieve this the Fortran compiler converts all identifiers into a canonical case and format. To call a Fortran subroutine from C or to write a C function that is callable from Fortran, the C program must explicitly use identifiers in the format expected by the Fortran compiler. In order to do this, one simply wraps all C identifiers in one of the macros provided by @code{AC_F77_WRAPPERS} or @code{AC_FC_WRAPPERS}. For example, suppose you have the following Fortran 77 subroutine: @example @c If you change this example, adjust tests/fortran.at:AC_F77_DUMMY_MAIN usage. subroutine foobar (x, y) double precision x, y y = 3.14159 * x return end @end example You would then declare its prototype in C or C++ as: @example @c If you change this example, adjust tests/fortran.at:AC_F77_DUMMY_MAIN usage. #define FOOBAR_F77 F77_FUNC (foobar, FOOBAR) #ifdef __cplusplus extern "C" /* prevent C++ name mangling */ #endif void FOOBAR_F77 (double *x, double *y); @end example Note that we pass both the lowercase and uppercase versions of the function name to @code{F77_FUNC} so that it can select the right one. Note also that all parameters to Fortran 77 routines are passed as pointers (@pxref{Mixing Fortran 77 With C and C++, , , automake, GNU Automake}). (Replace @code{F77} with @code{FC} for Fortran instead of Fortran 77.) Although Autoconf tries to be intelligent about detecting the name-mangling scheme of the Fortran compiler, there may be Fortran compilers that it doesn't support yet. In this case, the above code generates a compile-time error, but some other behavior (e.g., disabling Fortran-related features) can be induced by checking whether @code{F77_FUNC} or @code{FC_FUNC} is defined. Now, to call that routine from a C program, we would do something like: @example @c If you change this example, adjust tests/fortran.at:AC_F77_DUMMY_MAIN usage. @{ double x = 2.7183, y; FOOBAR_F77 (&x, &y); @} @end example If the Fortran identifier contains an underscore (e.g., @code{foo_bar}), you should use @code{F77_FUNC_} or @code{FC_FUNC_} instead of @code{F77_FUNC} or @code{FC_FUNC} (with the same arguments). This is because some Fortran compilers mangle names differently if they contain an underscore. The name mangling scheme is encoded in the @code{ac_cv_f77_mangling} or @code{ac_cv_fc_mangling} cache variable, respectively, and also used for the @code{AC_F77_FUNC} and @code{AC_FC_FUNC} macros described below. @end defmac @defmac AC_F77_FUNC (@var{name}, @ovar{shellvar}) @defmacx AC_FC_FUNC (@var{name}, @ovar{shellvar}) @acindex{F77_FUNC} @acindex{FC_FUNC} Given an identifier @var{name}, set the shell variable @var{shellvar} to hold the mangled version @var{name} according to the rules of the Fortran linker (see also @code{AC_F77_WRAPPERS} or @code{AC_FC_WRAPPERS}). @var{shellvar} is optional; if it is not supplied, the shell variable is simply @var{name}. The purpose of this macro is to give the caller a way to access the name-mangling information other than through the C preprocessor as above, for example, to call Fortran routines from some language other than C/C++. @end defmac @defmac AC_FC_SRCEXT (@var{ext}, @ovar{action-if-success}, @ @dvar{action-if-failure, AC_MSG_FAILURE}) @defmacx AC_FC_PP_SRCEXT (@var{ext}, @ovar{action-if-success}, @ @dvar{action-if-failure, AC_MSG_FAILURE}) @acindex{FC_SRCEXT} @acindex{FC_PP_SRCEXT} @caindex fc_srcext_@var{ext} @caindex fc_pp_srcext_@var{ext} By default, the @code{FC} macros perform their tests using a @file{.f} extension for source-code files. Some compilers, however, only enable newer language features for appropriately named files, e.g., Fortran 90 features only for @file{.f90} files, or preprocessing only with @file{.F} files or maybe other upper-case extensions. On the other hand, some other compilers expect all source files to end in @file{.f} and require special flags to support other file name extensions. The @code{AC_FC_SRCEXT} and @code{AC_FC_PP_SRCEXT} macros deal with these issues. The @code{AC_FC_SRCEXT} macro tries to get the @code{FC} compiler to accept files ending with the extension @file{.@var{ext}} (i.e., @var{ext} does @emph{not} contain the dot). If any special compiler flags are needed for this, it stores them in the output variable @code{FCFLAGS_@var{ext}}. This extension and these flags are then used for all subsequent @code{FC} tests (until @code{AC_FC_SRCEXT} or @code{AC_FC_PP_SRCEXT} is called another time). For example, you would use @code{AC_FC_SRCEXT(f90)} to employ the @file{.f90} extension in future tests, and it would set the @code{FCFLAGS_f90} output variable with any extra flags that are needed to compile such files. Similarly, the @code{AC_FC_PP_SRCEXT} macro tries to get the @code{FC} compiler to preprocess and compile files with the extension @file{.@var{ext}}. When both @command{fpp} and @command{cpp} style preprocessing are provided, the former is preferred, as the latter may treat continuation lines, @code{//} tokens, and white space differently from what some Fortran dialects expect. Conversely, if you do not want files to be preprocessed, use only lower-case characters in the file name extension. Like with @code{AC_FC_SRCEXT(f90)}, any needed flags are stored in the @code{FCFLAGS_@var{ext}} variable. The @code{FCFLAGS_@var{ext}} flags can @emph{not} be simply absorbed into @code{FCFLAGS}, for two reasons based on the limitations of some compilers. First, only one @code{FCFLAGS_@var{ext}} can be used at a time, so files with different extensions must be compiled separately. Second, @code{FCFLAGS_@var{ext}} must appear @emph{immediately} before the source-code file name when compiling. So, continuing the example above, you might compile a @file{foo.f90} file in your makefile with the command: @example foo.o: foo.f90 $(FC) -c $(FCFLAGS) $(FCFLAGS_f90) '$(srcdir)/foo.f90' @end example If @code{AC_FC_SRCEXT} or @code{AC_FC_PP_SRCEXT} succeeds in compiling files with the @var{ext} extension, it calls @var{action-if-success} (defaults to nothing). If it fails, and cannot find a way to make the @code{FC} compiler accept such files, it calls @var{action-if-failure} (defaults to exiting with an error message). The @code{AC_FC_SRCEXT} and @code{AC_FC_PP_SRCEXT} macros cache their results in @code{ac_cv_fc_srcext_@var{ext}} and @code{ac_cv_fc_pp_srcext_@var{ext}} variables, respectively. @end defmac @defmac AC_FC_PP_DEFINE (@ovar{action-if-success}, @ @dvar{action-if-failure, AC_MSG_FAILURE}) @acindex{FC_PP_DEFINE} @caindex fc_pp_define Find a flag to specify defines for preprocessed Fortran. Not all Fortran compilers use @option{-D}. Substitute @code{FC_DEFINE} with the result and call @var{action-if-success} (defaults to nothing) if successful, and @var{action-if-failure} (defaults to failing with an error message) if not. This macro calls @code{AC_FC_PP_SRCEXT([F])} in order to learn how to preprocess a @file{conftest.F} file, but restores a previously used Fortran source file extension afterwards again. The result of this test is cached in the @code{ac_cv_fc_pp_define} variable. @end defmac @defmac AC_FC_FREEFORM (@ovar{action-if-success}, @ @dvar{action-if-failure, AC_MSG_FAILURE}) @acindex{FC_FREEFORM} @caindex fc_freeform Try to ensure that the Fortran compiler (@code{$FC}) allows free-format source code (as opposed to the older fixed-format style from Fortran 77). If necessary, it may add some additional flags to @code{FCFLAGS}. This macro is most important if you are using the default @file{.f} extension, since many compilers interpret this extension as indicating fixed-format source unless an additional flag is supplied. If you specify a different extension with @code{AC_FC_SRCEXT}, such as @file{.f90}, then @code{AC_FC_FREEFORM} ordinarily succeeds without modifying @code{FCFLAGS}. For extensions which the compiler does not know about, the flag set by the @code{AC_FC_SRCEXT} macro might let the compiler assume Fortran 77 by default, however. If @code{AC_FC_FREEFORM} succeeds in compiling free-form source, it calls @var{action-if-success} (defaults to nothing). If it fails, it calls @var{action-if-failure} (defaults to exiting with an error message). The result of this test, or @samp{none} or @samp{unknown}, is cached in the @code{ac_cv_fc_freeform} variable. @end defmac @defmac AC_FC_FIXEDFORM (@ovar{action-if-success}, @ @dvar{action-if-failure, AC_MSG_FAILURE}) @acindex{FC_FIXEDFORM} @caindex fc_fixedform Try to ensure that the Fortran compiler (@code{$FC}) allows the old fixed-format source code (as opposed to free-format style). If necessary, it may add some additional flags to @code{FCFLAGS}. This macro is needed for some compilers alias names like @command{xlf95} which assume free-form source code by default, and in case you want to use fixed-form source with an extension like @file{.f90} which many compilers interpret as free-form by default. If you specify a different extension with @code{AC_FC_SRCEXT}, such as @file{.f}, then @code{AC_FC_FIXEDFORM} ordinarily succeeds without modifying @code{FCFLAGS}. If @code{AC_FC_FIXEDFORM} succeeds in compiling fixed-form source, it calls @var{action-if-success} (defaults to nothing). If it fails, it calls @var{action-if-failure} (defaults to exiting with an error message). The result of this test, or @samp{none} or @samp{unknown}, is cached in the @code{ac_cv_fc_fixedform} variable. @end defmac @defmac AC_FC_LINE_LENGTH (@ovar{length}, @ovar{action-if-success}, @ @dvar{action-if-failure, AC_MSG_FAILURE}) @acindex{FC_LINE_LENGTH} @caindex fc_line_length Try to ensure that the Fortran compiler (@code{$FC}) accepts long source code lines. The @var{length} argument may be given as 80, 132, or unlimited, and defaults to 132. Note that line lengths above 250 columns are not portable, and some compilers do not accept more than 132 columns at least for fixed format source. If necessary, it may add some additional flags to @code{FCFLAGS}. If @code{AC_FC_LINE_LENGTH} succeeds in compiling fixed-form source, it calls @var{action-if-success} (defaults to nothing). If it fails, it calls @var{action-if-failure} (defaults to exiting with an error message). The result of this test, or @samp{none} or @samp{unknown}, is cached in the @code{ac_cv_fc_line_length} variable. @end defmac @defmac AC_FC_CHECK_BOUNDS (@ovar{action-if-success}, @ @dvar{action-if-failure, AC_MSG_FAILURE}) @acindex{FC_CHECK_BOUNDS} @caindex fc_check_bounds The @code{AC_FC_CHECK_BOUNDS} macro tries to enable array bounds checking in the Fortran compiler. If successful, the @var{action-if-success} is called and any needed flags are added to @code{FCFLAGS}. Otherwise, @var{action-if-failure} is called, which defaults to failing with an error message. The macro currently requires Fortran 90 or a newer dialect. The result of the macro is cached in the @code{ac_cv_fc_check_bounds} variable. @end defmac @defmac AC_F77_IMPLICIT_NONE (@ovar{action-if-success}, @ @dvar{action-if-failure, AC_MSG_FAILURE}) @defmacx AC_FC_IMPLICIT_NONE (@ovar{action-if-success}, @ @dvar{action-if-failure, AC_MSG_FAILURE}) @acindex{F77_IMPLICIT_NONE} @acindex{FC_IMPLICIT_NONE} @caindex f77_implicit_none @caindex fc_implicit_none Try to disallow implicit declarations in the Fortran compiler. If successful, @var{action-if-success} is called and any needed flags are added to @code{FFLAGS} or @code{FCFLAGS}, respectively. Otherwise, @var{action-if-failure} is called, which defaults to failing with an error message. The result of these macros are cached in the @code{ac_cv_f77_implicit_none} and @code{ac_cv_fc_implicit_none} variables, respectively. @end defmac @defmac AC_FC_MODULE_EXTENSION @acindex{FC_MODULE_EXTENSION} @caindex fc_module_ext @ovindex FC_MODEXT Find the Fortran 90 module file name extension. Most Fortran 90 compilers store module information in files separate from the object files. The module files are usually named after the name of the module rather than the source file name, with characters possibly turned to upper case, plus an extension, often @file{.mod}. Not all compilers use module files at all, or by default. The Cray Fortran compiler requires @option{-e m} in order to store and search module information in @file{.mod} files rather than in object files. Likewise, the Fujitsu Fortran compilers uses the @option{-Am} option to indicate how module information is stored. The @code{AC_FC_MODULE_EXTENSION} macro computes the module extension without the leading dot, and stores that in the @code{FC_MODEXT} variable. If the compiler does not produce module files, or the extension cannot be determined, @code{FC_MODEXT} is empty. Typically, the result of this macro may be used in cleanup @command{make} rules as follows: @example clean-modules: -test -z "$(FC_MODEXT)" || rm -f *.$(FC_MODEXT) @end example The extension, or @samp{unknown}, is cached in the @code{ac_cv_fc_module_ext} variable. @end defmac @defmac AC_FC_MODULE_FLAG (@ovar{action-if-success}, @ @dvar{action-if-failure, AC_MSG_FAILURE}) @acindex{FC_MODULE_FLAG} @caindex fc_module_flag @ovindex FC_MODINC @ovindex ac_empty Find the compiler flag to include Fortran 90 module information from another directory, and store that in the @code{FC_MODINC} variable. Call @var{action-if-success} (defaults to nothing) if successful, and set @code{FC_MODINC} to empty and call @var{action-if-failure} (defaults to exiting with an error message) if not. Most Fortran 90 compilers provide a way to specify module directories. Some have separate flags for the directory to write module files to, and directories to search them in, whereas others only allow writing to the current directory or to the first directory specified in the include path. Further, with some compilers, the module search path and the preprocessor search path can only be modified with the same flag. Thus, for portability, write module files to the current directory only and list that as first directory in the search path. There may be no whitespace between @code{FC_MODINC} and the following directory name, but @code{FC_MODINC} may contain trailing white space. For example, if you use Automake and would like to search @file{../lib} for module files, you can use the following: @example AM_FCFLAGS = $(FC_MODINC). $(FC_MODINC)../lib @end example Inside @command{configure} tests, you can use: @example if test -n "$FC_MODINC"; then FCFLAGS="$FCFLAGS $FC_MODINC. $FC_MODINC../lib" fi @end example The flag is cached in the @code{ac_cv_fc_module_flag} variable. The substituted value of @code{FC_MODINC} may refer to the @code{ac_empty} dummy placeholder empty variable, to avoid losing the significant trailing whitespace in a @file{Makefile}. @end defmac @defmac AC_FC_MODULE_OUTPUT_FLAG (@ovar{action-if-success}, @ @dvar{action-if-failure, AC_MSG_FAILURE}) @acindex{FC_MODULE_OUTPUT_FLAG} @caindex fc_module_output_flag @ovindex FC_MODOUT Find the compiler flag to write Fortran 90 module information to another directory, and store that in the @code{FC_MODOUT} variable. Call @var{action-if-success} (defaults to nothing) if successful, and set @code{FC_MODOUT} to empty and call @var{action-if-failure} (defaults to exiting with an error message) if not. Not all Fortran 90 compilers write module files, and of those that do, not all allow writing to a directory other than the current one, nor do all have separate flags for writing and reading; see the description of @code{AC_FC_MODULE_FLAG} above. If you need to be able to write to another directory, for maximum portability use @code{FC_MODOUT} before any @code{FC_MODINC} and include both the current directory and the one you write to in the search path: @example AM_FCFLAGS = $(FC_MODOUT)../mod $(FC_MODINC)../mod $(FC_MODINC). @dots{} @end example The flag is cached in the @code{ac_cv_fc_module_output_flag} variable. The substituted value of @code{FC_MODOUT} may refer to the @code{ac_empty} dummy placeholder empty variable, to avoid losing the significant trailing whitespace in a @file{Makefile}. @end defmac @node Go Compiler @subsection Go Compiler Characteristics @cindex Go Autoconf provides basic support for the Go programming language when using the @code{gccgo} compiler (there is currently no support for the @code{6g} and @code{8g} compilers). @defmac AC_PROG_GO (@ovar{compiler-search-list}) Find the Go compiler to use. Check whether the environment variable @code{GOC} is set; if so, then set output variable @code{GOC} to its value. Otherwise, if the macro is invoked without an argument, then search for a Go compiler named @code{gccgo}. If it is not found, then as a last resort set @code{GOC} to @code{gccgo}. This macro may be invoked with an optional first argument which, if specified, must be a blank-separated list of Go compilers to search for. If output variable @code{GOFLAGS} was not already set, set it to @option{-g -O2}. If your package does not like this default, @code{GOFLAGS} may be set before @code{AC_PROG_GO}. @end defmac @node System Services @section System Services The following macros check for operating system services or capabilities. @anchor{AC_PATH_X} @defmac AC_PATH_X @acindex{PATH_X} @evindex XMKMF @cindex X Window System Try to locate the X Window System include files and libraries. If the user gave the command line options @option{--x-includes=@var{dir}} and @option{--x-libraries=@var{dir}}, use those directories. If either or both were not given, get the missing values by running @code{xmkmf} (or an executable pointed to by the @code{XMKMF} environment variable) on a trivial @file{Imakefile} and examining the makefile that it produces. Setting @code{XMKMF} to @samp{false} disables this method. If this method fails to find the X Window System, @command{configure} looks for the files in several directories where they often reside. If either method is successful, set the shell variables @code{x_includes} and @code{x_libraries} to their locations, unless they are in directories the compiler searches by default. If both methods fail, or the user gave the command line option @option{--without-x}, set the shell variable @code{no_x} to @samp{yes}; otherwise set it to the empty string. @end defmac @anchor{AC_PATH_XTRA} @defmac AC_PATH_XTRA @acindex{PATH_XTRA} @ovindex X_CFLAGS @ovindex X_LIBS @ovindex X_EXTRA_LIBS @ovindex X_PRE_LIBS @cvindex X_DISPLAY_MISSING An enhanced version of @code{AC_PATH_X}. It adds the C compiler flags that X needs to output variable @code{X_CFLAGS}, and the X linker flags to @code{X_LIBS}. Define @code{X_DISPLAY_MISSING} if X is not available. This macro also checks for special libraries that some systems need in order to compile X programs. It adds any that the system needs to output variable @code{X_EXTRA_LIBS}. And it checks for special X11R6 libraries that need to be linked with before @option{-lX11}, and adds any found to the output variable @code{X_PRE_LIBS}. @c This is an incomplete kludge. Make a real way to do it. @c If you need to check for other X functions or libraries yourself, then @c after calling this macro, add the contents of @code{X_EXTRA_LIBS} to @c @code{LIBS} temporarily, like this: (FIXME - add example) @end defmac @anchor{AC_SYS_INTERPRETER} @defmac AC_SYS_INTERPRETER @acindex{SYS_INTERPRETER} Check whether the system supports starting scripts with a line of the form @samp{#!/bin/sh} to select the interpreter to use for the script. After running this macro, shell code in @file{configure.ac} can check the shell variable @code{interpval}; it is set to @samp{yes} if the system supports @samp{#!}, @samp{no} if not. @end defmac @defmac AC_SYS_LARGEFILE @acindex{SYS_LARGEFILE} @cvindex _FILE_OFFSET_BITS @cvindex _LARGE_FILES @ovindex CC @cindex Large file support @cindex LFS Arrange for 64-bit file offsets, known as @uref{http://@/www.unix.org/@/version2/@/whatsnew/@/lfs20mar.html, large-file support}. On some hosts, one must use special compiler options to build programs that can access large files. Append any such options to the output variable @code{CC}. Define @code{_FILE_OFFSET_BITS} and @code{_LARGE_FILES} if necessary. Large-file support can be disabled by configuring with the @option{--disable-largefile} option. If you use this macro, check that your program works even when @code{off_t} is wider than @code{long int}, since this is common when large-file support is enabled. For example, it is not correct to print an arbitrary @code{off_t} value @code{X} with @code{printf ("%ld", (long int) X)}. Also, when using this macro in concert with @code{AC_CONFIG_HEADERS}, be sure that @file{config.h} is included before any system header. The LFS introduced the @code{fseeko} and @code{ftello} functions to replace their C counterparts @code{fseek} and @code{ftell} that do not use @code{off_t}. Take care to use @code{AC_FUNC_FSEEKO} to make their prototypes available when using them and large-file support is enabled. @end defmac @anchor{AC_SYS_LONG_FILE_NAMES} @defmac AC_SYS_LONG_FILE_NAMES @acindex{SYS_LONG_FILE_NAMES} @cvindex HAVE_LONG_FILE_NAMES If the system supports file names longer than 14 characters, define @code{HAVE_LONG_FILE_NAMES}. @end defmac @defmac AC_SYS_POSIX_TERMIOS @acindex{SYS_POSIX_TERMIOS} @cindex Posix termios headers @cindex termios Posix headers @caindex sys_posix_termios Check to see if the Posix termios headers and functions are available on the system. If so, set the shell variable @code{ac_cv_sys_posix_termios} to @samp{yes}. If not, set the variable to @samp{no}. @end defmac @node C and Posix Variants @section C and Posix Variants The following macro makes it possible to use C language and library extensions defined by the C standards committee, features of Posix that are extensions to C, and platform extensions not defined by Posix. @anchor{AC_USE_SYSTEM_EXTENSIONS} @defmac AC_USE_SYSTEM_EXTENSIONS @acindex{USE_SYSTEM_EXTENSIONS} If possible, enable extensions to C or Posix on hosts that normally disable the extensions, typically due to standards-conformance namespace issues. This should be called before any macros that run the C compiler. Also, when using this macro in concert with @code{AC_CONFIG_HEADERS}, be sure that @file{config.h} is included before any system header. The following preprocessor macros are defined where appropriate: @table @code @item _GNU_SOURCE @cvindex _GNU_SOURCE Enable extensions on GNU/Linux. @item _ALL_SOURCE @cvindex _ALL_SOURCE Enable extensions for AIX 3, and for Interix. @item _DARWIN_C_SOURCE @cvindex _DARWIN_C_SOURCE Enable extensions for macOS. @item _MINIX @cvindex _MINIX Identify Minix platform. This particular preprocessor macro is obsolescent, and may be removed in a future release of Autoconf. @item _NETBSD_SOURCE @cvindex _NETBSD_SOURCE Enable NetBSD-related extensions for Minix. @item _POSIX_1_SOURCE @cvindex _POSIX_1_SOURCE Enable additional Posix functions for Minix. @item _POSIX_PTHREAD_SEMANTICS @cvindex _POSIX_PTHREAD_SEMANTICS Enable threading extensions on Solaris. @item _POSIX_SOURCE @cvindex _POSIX_SOURCE Enable Posix functions for Minix. @item _TANDEM_SOURCE @cvindex _TANDEM_SOURCE Enable extensions for the HP NonStop platform. @item _XOPEN_SOURCE @cvindex _XOPEN_SOURCE Enable X/Open extensions for HP-UX. @item __EXTENSIONS__ @cvindex __EXTENSIONS__ Enable general extensions on Solaris. @item __STDC_WANT_IEC_60559_ATTRIBS_EXT__ @cvindex __STDC_WANT_IEC_60559_ATTRIBS_EXT__ Enable extensions specified by ISO/IEC TS 18661-5:2014. @item __STDC_WANT_IEC_60559_BFP_EXT__ @cvindex __STDC_WANT_IEC_60559_BFP_EXT__ Enable extensions specified by ISO/IEC TS 18661-1:2014. @item __STDC_WANT_IEC_60559_DFP_EXT__ @cvindex __STDC_WANT_IEC_60559_DFP_EXT__ Enable extensions specified by ISO/IEC TS 18661-2:2015. @item __STDC_WANT_IEC_60559_FUNCS_EXT__ @cvindex __STDC_WANT_IEC_60559_FUNCS_EXT__ Enable extensions specified by ISO/IEC TS 18661-4:2015. @item __STDC_WANT_IEC_60559_TYPES_EXT__ @cvindex __STDC_WANT_IEC_60559_TYPES_EXT__ Enable extensions specified by ISO/IEC TS 18661-3:2015. @item __STDC_WANT_LIB_EXT2__ @cvindex __STDC_WANT_LIB_EXT2__ Enable extensions specified by ISO/IEC TR 24731-2:2010. @item __STDC_WANT_MATH_SPEC_FUNCS__ @cvindex __STDC_WANT_MATH_SPEC_FUNCS__ Enable extensions specified by ISO/IEC 24747:2009. @end table @cvindex __STDC_WANT_DEC_FP__ The C preprocessor macro @code{__STDC_WANT_DEC_FP__} is not defined. ISO/IEC TR 24732:2009 was superseded by ISO/IEC TS 18661-2:2015. @cvindex __STDC_WANT_LIB_EXT1__ The C preprocessor macro @code{__STDC_WANT_LIB_EXT1__} is not defined, as C11 Annex K is problematic. See: O'Donell C, Sebor M. @uref{http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1967.htm, Field Experience With Annex K---Bounds Checking Interfaces}. The Autoconf macro @code{AC_USE_SYSTEM_EXTENSIONS} was introduced in Autoconf 2.60. @end defmac @node Erlang Libraries @section Erlang Libraries @cindex Erlang, Library, checking The following macros check for an installation of Erlang/OTP, and for the presence of certain Erlang libraries. All those macros require the configuration of an Erlang interpreter and an Erlang compiler (@pxref{Erlang Compiler and Interpreter}). @defmac AC_ERLANG_SUBST_ERTS_VER @acindex{ERLANG_SUBST_ERTS_VER} @ovindex ERLANG_ERTS_VER Set the output variable @code{ERLANG_ERTS_VER} to the version of the Erlang runtime system (as returned by Erlang's @code{erlang:system_info(version)} function). The result of this test is cached if caching is enabled when running @command{configure}. The @code{ERLANG_ERTS_VER} variable is not intended to be used for testing for features of specific ERTS versions, but to be used for substituting the ERTS version in Erlang/OTP release resource files (@code{.rel} files), as shown below. @end defmac @defmac AC_ERLANG_SUBST_ROOT_DIR @acindex{ERLANG_SUBST_ROOT_DIR} @ovindex ERLANG_ROOT_DIR Set the output variable @code{ERLANG_ROOT_DIR} to the path to the base directory in which Erlang/OTP is installed (as returned by Erlang's @code{code:root_dir/0} function). The result of this test is cached if caching is enabled when running @command{configure}. @end defmac @defmac AC_ERLANG_SUBST_LIB_DIR @acindex{ERLANG_SUBST_LIB_DIR} @ovindex ERLANG_LIB_DIR Set the output variable @code{ERLANG_LIB_DIR} to the path of the library directory of Erlang/OTP (as returned by Erlang's @code{code:lib_dir/0} function), which subdirectories each contain an installed Erlang/OTP library. The result of this test is cached if caching is enabled when running @command{configure}. @end defmac @defmac AC_ERLANG_CHECK_LIB (@var{library}, @ovar{action-if-found}, @ @ovar{action-if-not-found}) @acindex{ERLANG_CHECK_LIB} @ovindex ERLANG_LIB_DIR_@var{library} @ovindex ERLANG_LIB_VER_@var{library} Test whether the Erlang/OTP library @var{library} is installed by calling Erlang's @code{code:lib_dir/1} function. The result of this test is cached if caching is enabled when running @command{configure}. @var{action-if-found} is a list of shell commands to run if the library is installed; @var{action-if-not-found} is a list of shell commands to run if it is not. Additionally, if the library is installed, the output variable @samp{ERLANG_LIB_DIR_@var{library}} is set to the path to the library installation directory, and the output variable @samp{ERLANG_LIB_VER_@var{library}} is set to the version number that is part of the subdirectory name, if it is in the standard form (@code{@var{library}-@var{version}}). If the directory name does not have a version part, @samp{ERLANG_LIB_VER_@var{library}} is set to the empty string. If the library is not installed, @samp{ERLANG_LIB_DIR_@var{library}} and @samp{ERLANG_LIB_VER_@var{library}} are set to @code{"not found"}. For example, to check if library @code{stdlib} is installed: @example AC_ERLANG_CHECK_LIB([stdlib], [echo "stdlib version \"$ERLANG_LIB_VER_stdlib\"" echo "is installed in \"$ERLANG_LIB_DIR_stdlib\""], [AC_MSG_ERROR([stdlib was not found!])]) @end example The @samp{ERLANG_LIB_VER_@var{library}} variables (set by @code{AC_ERLANG_CHECK_LIB}) and the @code{ERLANG_ERTS_VER} variable (set by @code{AC_ERLANG_SUBST_ERTS_VER}) are not intended to be used for testing for features of specific versions of libraries or of the Erlang runtime system. Those variables are intended to be substituted in Erlang release resource files (@code{.rel} files). For instance, to generate a @file{example.rel} file for an application depending on the @code{stdlib} library, @file{configure.ac} could contain: @example AC_ERLANG_SUBST_ERTS_VER AC_ERLANG_CHECK_LIB([stdlib], [], [AC_MSG_ERROR([stdlib was not found!])]) AC_CONFIG_FILES([example.rel]) @end example @noindent The @file{example.rel.in} file used to generate @file{example.rel} should contain: @example @{release, @{"@@PACKAGE@@", "@@VERSION@@"@}, @{erts, "@@ERLANG_ERTS_VER@@"@}, [@{stdlib, "@@ERLANG_LIB_VER_stdlib@@"@}, @{@@PACKAGE@@, "@@VERSION@@"@}]@}. @end example @end defmac In addition to the above macros, which test installed Erlang libraries, the following macros determine the paths to the directories into which newly built Erlang libraries are to be installed: @defmac AC_ERLANG_SUBST_INSTALL_LIB_DIR @acindex{ERLANG_SUBST_INSTALL_LIB_DIR} @ovindex ERLANG_INSTALL_LIB_DIR Set the @code{ERLANG_INSTALL_LIB_DIR} output variable to the directory into which every built Erlang library should be installed in a separate subdirectory. If this variable is not set in the environment when @command{configure} runs, its default value is @code{$@{libdir@}/erlang/lib}. @end defmac @defmac AC_ERLANG_SUBST_INSTALL_LIB_SUBDIR (@var{library}, @var{version}) @acindex{ERLANG_SUBST_INSTALL_LIB_SUBDIR} @ovindex ERLANG_INSTALL_LIB_DIR_@var{library} Set the @samp{ERLANG_INSTALL_LIB_DIR_@var{library}} output variable to the directory into which the built Erlang library @var{library} version @var{version} should be installed. If this variable is not set in the environment when @command{configure} runs, its default value is @samp{$ERLANG_INSTALL_LIB_DIR/@var{library}-@var{version}}, the value of the @code{ERLANG_INSTALL_LIB_DIR} variable being set by the @code{AC_ERLANG_SUBST_INSTALL_LIB_DIR} macro. @end defmac @c ========================================================= Writing Tests @node Writing Tests @chapter Writing Tests If the existing feature tests don't do something you need, you have to write new ones. These macros are the building blocks. They provide ways for other macros to check whether various kinds of features are available and report the results. This chapter contains some suggestions and some of the reasons why the existing tests are written the way they are. You can also learn a lot about how to write Autoconf tests by looking at the existing ones. If something goes wrong in one or more of the Autoconf tests, this information can help you understand the assumptions behind them, which might help you figure out how to best solve the problem. These macros check the output of the compiler system of the current language (@pxref{Language Choice}). They do not cache the results of their tests for future use (@pxref{Caching Results}), because they don't know enough about the information they are checking for to generate a cache variable name. They also do not print any messages, for the same reason. The checks for particular kinds of features call these macros and do cache their results and print messages about what they're checking for. When you write a feature test that could be applicable to more than one software package, the best thing to do is encapsulate it in a new macro. @xref{Writing Autoconf Macros}, for how to do that. @menu * Language Choice:: Selecting which language to use for testing * Writing Test Programs:: Forging source files for compilers * Running the Preprocessor:: Detecting preprocessor symbols * Running the Compiler:: Detecting language or header features * Running the Linker:: Detecting library features * Runtime:: Testing for runtime features * Systemology:: A zoology of operating systems * Multiple Cases:: Tests for several possible values @end menu @node Language Choice @section Language Choice @cindex Language Autoconf-generated @command{configure} scripts check for the C compiler and its features by default. Packages that use other programming languages (maybe more than one, e.g., C and C++) need to test features of the compilers for the respective languages. The following macros determine which programming language is used in the subsequent tests in @file{configure.ac}. @anchor{AC_LANG} @defmac AC_LANG (@var{language}) @acindex{LANG} Do compilation tests using the compiler, preprocessor, and file extensions for the specified @var{language}. Supported languages are: @table @samp @item C Do compilation tests using @code{CC} and @code{CPP} and use extension @file{.c} for test programs. Use compilation flags: @code{CPPFLAGS} with @code{CPP}, and both @code{CPPFLAGS} and @code{CFLAGS} with @code{CC}. @item C++ Do compilation tests using @code{CXX} and @code{CXXCPP} and use extension @file{.C} for test programs. Use compilation flags: @code{CPPFLAGS} with @code{CXXCPP}, and both @code{CPPFLAGS} and @code{CXXFLAGS} with @code{CXX}. @item Fortran 77 Do compilation tests using @code{F77} and use extension @file{.f} for test programs. Use compilation flags: @code{FFLAGS}. @item Fortran Do compilation tests using @code{FC} and use extension @file{.f} (or whatever has been set by @code{AC_FC_SRCEXT}) for test programs. Use compilation flags: @code{FCFLAGS}. @item Erlang @ovindex ERLC @ovindex ERL @ovindex ERLCFLAGS Compile and execute tests using @code{ERLC} and @code{ERL} and use extension @file{.erl} for test Erlang modules. Use compilation flags: @code{ERLCFLAGS}. @item Objective C Do compilation tests using @code{OBJC} and @code{OBJCPP} and use extension @file{.m} for test programs. Use compilation flags: @code{CPPFLAGS} with @code{OBJCPP}, and both @code{CPPFLAGS} and @code{OBJCFLAGS} with @code{OBJC}. @item Objective C++ Do compilation tests using @code{OBJCXX} and @code{OBJCXXCPP} and use extension @file{.mm} for test programs. Use compilation flags: @code{CPPFLAGS} with @code{OBJCXXCPP}, and both @code{CPPFLAGS} and @code{OBJCXXFLAGS} with @code{OBJCXX}. @item Go Do compilation tests using @code{GOC} and use extension @file{.go} for test programs. Use compilation flags @code{GOFLAGS}. @end table @end defmac @anchor{AC_LANG_PUSH} @defmac AC_LANG_PUSH (@var{language}) @acindex{LANG_PUSH} Remember the current language (as set by @code{AC_LANG}) on a stack, and then select the @var{language}. Use this macro and @code{AC_LANG_POP} in macros that need to temporarily switch to a particular language. @end defmac @defmac AC_LANG_POP (@ovar{language}) @acindex{LANG_POP} Select the language that is saved on the top of the stack, as set by @code{AC_LANG_PUSH}, and remove it from the stack. If given, @var{language} specifies the language we just @emph{quit}. It is a good idea to specify it when it's known (which should be the case@dots{}), since Autoconf detects inconsistencies. @example AC_LANG_PUSH([Fortran 77]) # Perform some tests on Fortran 77. # @dots{} AC_LANG_POP([Fortran 77]) @end example @end defmac @defmac AC_LANG_ASSERT (@var{language}) @acindex{LANG_ASSERT} Check statically that the current language is @var{language}. You should use this in your language specific macros to avoid that they be called with an inappropriate language. This macro runs only at @command{autoconf} time, and incurs no cost at @command{configure} time. Sadly enough and because Autoconf is a two layer language @footnote{Because M4 is not aware of Sh code, especially conditionals, some optimizations that look nice statically may produce incorrect results at runtime.}, the macros @code{AC_LANG_PUSH} and @code{AC_LANG_POP} cannot be ``optimizing'', therefore as much as possible you ought to avoid using them to wrap your code, rather, require from the user to run the macro with a correct current language, and check it with @code{AC_LANG_ASSERT}. And anyway, that may help the user understand she is running a Fortran macro while expecting a result about her Fortran 77 compiler@enddots{} @end defmac @defmac AC_REQUIRE_CPP @acindex{REQUIRE_CPP} Ensure that whichever preprocessor would currently be used for tests has been found. Calls @code{AC_REQUIRE} (@pxref{Prerequisite Macros}) with an argument of either @code{AC_PROG_CPP} or @code{AC_PROG_CXXCPP}, depending on which language is current. @end defmac @node Writing Test Programs @section Writing Test Programs Autoconf tests follow a common scheme: feed some program with some input, and most of the time, feed a compiler with some source file. This section is dedicated to these source samples. @menu * Guidelines:: General rules for writing test programs * Test Functions:: Avoiding pitfalls in test programs * Generating Sources:: Source program boilerplate @end menu @node Guidelines @subsection Guidelines for Test Programs The most important rule to follow when writing testing samples is: @center @emph{Look for realism.} This motto means that testing samples must be written with the same strictness as real programs are written. In particular, you should avoid ``shortcuts'' and simplifications. Don't just play with the preprocessor if you want to prepare a compilation. For instance, using @command{cpp} to check whether a header is functional might let your @command{configure} accept a header which causes some @emph{compiler} error. Do not hesitate to check a header with other headers included before, especially required headers. Make sure the symbols you use are properly defined, i.e., refrain from simply declaring a function yourself instead of including the proper header. Test programs should not write to standard output. They should exit with status 0 if the test succeeds, and with status 1 otherwise, so that success can be distinguished easily from a core dump or other failure; segmentation violations and other failures produce a nonzero exit status. Unless you arrange for @code{exit} to be declared, test programs should @code{return}, not @code{exit}, from @code{main}, because on many systems @code{exit} is not declared by default. Test programs can use @code{#if} or @code{#ifdef} to check the values of preprocessor macros defined by tests that have already run. For example, if you call @code{AC_HEADER_STDBOOL}, then later on in @file{configure.ac} you can have a test program that includes @file{stdbool.h} conditionally: @example @group #ifdef HAVE_STDBOOL_H # include #endif @end group @end example Both @code{#if HAVE_STDBOOL_H} and @code{#ifdef HAVE_STDBOOL_H} will work with any standard C compiler. Some developers prefer @code{#if} because it is easier to read, while others prefer @code{#ifdef} because it avoids diagnostics with picky compilers like GCC with the @option{-Wundef} option. If a test program needs to use or create a data file, give it a name that starts with @file{conftest}, such as @file{conftest.data}. The @command{configure} script cleans up by running @samp{rm -f -r conftest*} after running test programs and if the script is interrupted. @node Test Functions @subsection Test Functions These days it's safe to assume support for function prototypes (introduced in C89). Functions that test programs declare should also be conditionalized for C++, which requires @samp{extern "C"} prototypes. Make sure to not include any header files containing clashing prototypes. @example #ifdef __cplusplus extern "C" #endif void *valloc (size_t); @end example If a test program calls a function with invalid parameters (just to see whether it exists), organize the program to ensure that it never invokes that function. You can do this by calling it in another function that is never invoked. You can't do it by putting it after a call to @code{exit}, because GCC version 2 knows that @code{exit} never returns and optimizes out any code that follows it in the same block. If you include any header files, be sure to call the functions relevant to them with the correct number of arguments, even if they are just 0, to avoid compilation errors due to prototypes. GCC version 2 has internal prototypes for several functions that it automatically inlines; for example, @code{memcpy}. To avoid errors when checking for them, either pass them the correct number of arguments or redeclare them with a different return type (such as @code{char}). @node Generating Sources @subsection Generating Sources Autoconf provides a set of macros that can be used to generate test source files. They are written to be language generic, i.e., they actually depend on the current language (@pxref{Language Choice}) to ``format'' the output properly. @defmac AC_LANG_CONFTEST (@var{source}) @acindex{LANG_CONFTEST} Save the @var{source} text in the current test source file: @file{conftest.@var{extension}} where the @var{extension} depends on the current language. As of Autoconf 2.63b, the source file also contains the results of all of the @code{AC_DEFINE} performed so far. Note that the @var{source} is evaluated exactly once, like regular Autoconf macro arguments, and therefore (i) you may pass a macro invocation, (ii) if not, be sure to double quote if needed. This macro issues a warning during @command{autoconf} processing if @var{source} does not include an expansion of the macro @code{AC_LANG_DEFINES_PROVIDED} (note that both @code{AC_LANG_SOURCE} and @code{AC_LANG_PROGRAM} call this macro, and thus avoid the warning). This macro is seldom called directly, but is used under the hood by more common macros such as @code{AC_COMPILE_IFELSE} and @code{AC_RUN_IFELSE}. @end defmac @defmac AC_LANG_DEFINES_PROVIDED @acindex{LANG_DEFINES_PROVIDED} This macro is called as a witness that the file @file{conftest.@var{extension}} appropriate for the current language is complete, including all previously determined results from @code{AC_DEFINE}. This macro is seldom called directly, but exists if you have a compelling reason to write a conftest file without using @code{AC_LANG_SOURCE}, yet still want to avoid a syntax warning from @code{AC_LANG_CONFTEST}. @end defmac @defmac AC_LANG_SOURCE (@var{source}) @acindex{LANG_SOURCE} Expands into the @var{source}, with the definition of all the @code{AC_DEFINE} performed so far. This macro includes an expansion of @code{AC_LANG_DEFINES_PROVIDED}. In many cases, you may find it more convenient to use the wrapper @code{AC_LANG_PROGRAM}. @end defmac For instance, executing (observe the double quotation!): @example @c If you change this example, adjust tests/compile.at:AC_LANG_SOURCE example. AC_INIT([Hello], [1.0], [bug-hello@@example.org], [], [https://www.example.org/]) AC_DEFINE([HELLO_WORLD], ["Hello, World\n"], [Greetings string.]) AC_LANG([C]) AC_LANG_CONFTEST( [AC_LANG_SOURCE([[const char hw[] = "Hello, World\n";]])]) gcc -E -dD conftest.c @end example @noindent on a system with @command{gcc} installed, results in: @example @c If you change this example, adjust tests/compile.at:AC_LANG_SOURCE example. @dots{} @asis{#} 1 "conftest.c" #define PACKAGE_NAME "Hello" #define PACKAGE_TARNAME "hello" #define PACKAGE_VERSION "1.0" #define PACKAGE_STRING "Hello 1.0" #define PACKAGE_BUGREPORT "bug-hello@@example.org" #define PACKAGE_URL "https://www.example.org/" #define HELLO_WORLD "Hello, World\n" const char hw[] = "Hello, World\n"; @end example When the test language is Fortran, Erlang, or Go, the @code{AC_DEFINE} definitions are not automatically translated into constants in the source code by this macro. @defmac AC_LANG_PROGRAM (@var{prologue}, @var{body}) @acindex{LANG_PROGRAM} Expands into a source file which consists of the @var{prologue}, and then @var{body} as body of the main function (e.g., @code{main} in C). Since it uses @code{AC_LANG_SOURCE}, the features of the latter are available. @end defmac For instance: @example @c If you change this example, adjust tests/compile.at:AC_LANG_PROGRAM example. AC_INIT([Hello], [1.0], [bug-hello@@example.org], [], [https://www.example.org/]) AC_DEFINE([HELLO_WORLD], ["Hello, World\n"], [Greetings string.]) AC_LANG_CONFTEST( [AC_LANG_PROGRAM([[const char hw[] = "Hello, World\n";]], [[fputs (hw, stdout);]])]) gcc -E -dD conftest.c @end example @noindent on a system with @command{gcc} installed, results in: @example @c If you change this example, adjust tests/compile.at:AC_LANG_PROGRAM example. @dots{} @asis{#} 1 "conftest.c" #define PACKAGE_NAME "Hello" #define PACKAGE_TARNAME "hello" #define PACKAGE_VERSION "1.0" #define PACKAGE_STRING "Hello 1.0" #define PACKAGE_BUGREPORT "bug-hello@@example.org" #define PACKAGE_URL "https://www.example.org/" #define HELLO_WORLD "Hello, World\n" const char hw[] = "Hello, World\n"; int main (void) @{ fputs (hw, stdout); ; return 0; @} @end example In Erlang tests, the created source file is that of an Erlang module called @code{conftest} (@file{conftest.erl}). This module defines and exports at least one @code{start/0} function, which is called to perform the test. The @var{prologue} is optional code that is inserted between the module header and the @code{start/0} function definition. @var{body} is the body of the @code{start/0} function without the final period (@pxref{Runtime}, about constraints on this function's behavior). For instance: @example AC_INIT([Hello], [1.0], [bug-hello@@example.org]) AC_LANG(Erlang) AC_LANG_CONFTEST( [AC_LANG_PROGRAM([[-define(HELLO_WORLD, "Hello, world!").]], [[io:format("~s~n", [?HELLO_WORLD])]])]) cat conftest.erl @end example @noindent results in: @example -module(conftest). -export([start/0]). -define(HELLO_WORLD, "Hello, world!"). start() -> io:format("~s~n", [?HELLO_WORLD]) . @end example @defmac AC_LANG_CALL (@var{prologue}, @var{function}) @acindex{LANG_CALL} Expands into a source file which consists of the @var{prologue}, and then a call to the @var{function} as body of the main function (e.g., @code{main} in C). Since it uses @code{AC_LANG_PROGRAM}, the feature of the latter are available. This function will probably be replaced in the future by a version which would enable specifying the arguments. The use of this macro is not encouraged, as it violates strongly the typing system. This macro cannot be used for Erlang tests. @end defmac @defmac AC_LANG_FUNC_LINK_TRY (@var{function}) @acindex{LANG_FUNC_LINK_TRY} Expands into a source file which uses the @var{function} in the body of the main function (e.g., @code{main} in C). Since it uses @code{AC_LANG_PROGRAM}, the features of the latter are available. As @code{AC_LANG_CALL}, this macro is documented only for completeness. It is considered to be severely broken, and in the future will be removed in favor of actual function calls (with properly typed arguments). This macro cannot be used for Erlang tests. @end defmac @node Running the Preprocessor @section Running the Preprocessor Sometimes one might need to run the preprocessor on some source file. @emph{Usually it is a bad idea}, as you typically need to @emph{compile} your project, not merely run the preprocessor on it; therefore you certainly want to run the compiler, not the preprocessor. Resist the temptation of following the easiest path. Nevertheless, if you need to run the preprocessor, then use @code{AC_PREPROC_IFELSE}. The macros described in this section cannot be used for tests in Erlang, Fortran, or Go, since those languages require no preprocessor. @anchor{AC_PREPROC_IFELSE} @defmac AC_PREPROC_IFELSE (@var{input}, @ovar{action-if-true}, @ @ovar{action-if-false}) @acindex{PREPROC_IFELSE} Run the preprocessor of the current language (@pxref{Language Choice}) on the @var{input}, run the shell commands @var{action-if-true} on success, @var{action-if-false} otherwise. The @var{input} can be made by @code{AC_LANG_PROGRAM} and friends. This macro uses @code{CPPFLAGS}, but not @code{CFLAGS}, because @option{-g}, @option{-O}, etc.@: are not valid options to many C preprocessors. It is customary to report unexpected failures with @code{AC_MSG_FAILURE}. If needed, @var{action-if-true} can further access the preprocessed output in the file @file{conftest.i}. @end defmac For instance: @example AC_INIT([Hello], [1.0], [bug-hello@@example.org]) AC_DEFINE([HELLO_WORLD], ["Hello, World\n"], [Greetings string.]) AC_PREPROC_IFELSE( [AC_LANG_PROGRAM([[const char hw[] = "Hello, World\n";]], [[fputs (hw, stdout);]])], [AC_MSG_RESULT([OK])], [AC_MSG_FAILURE([unexpected preprocessor failure])]) @end example @noindent might result in: @example checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... -std=gnu11 checking how to run the C preprocessor... gcc -std=gnu11 -E OK @end example @sp 1 The macro @code{AC_TRY_CPP} (@pxref{Obsolete Macros}) used to play the role of @code{AC_PREPROC_IFELSE}, but double quotes its argument, making it impossible to use it to elaborate sources. You are encouraged to get rid of your old use of the macro @code{AC_TRY_CPP} in favor of @code{AC_PREPROC_IFELSE}, but, in the first place, are you sure you need to run the @emph{preprocessor} and not the compiler? @anchor{AC_EGREP_HEADER} @defmac AC_EGREP_HEADER (@var{pattern}, @var{header-file}, @ @var{action-if-found}, @ovar{action-if-not-found}) @acindex{EGREP_HEADER} If the output of running the preprocessor on the system header file @var{header-file} matches the extended regular expression @var{pattern}, execute shell commands @var{action-if-found}, otherwise execute @var{action-if-not-found}. See below for some problems involving this macro. @end defmac @anchor{AC_EGREP_CPP} @defmac AC_EGREP_CPP (@var{pattern}, @var{program}, @ @ovar{action-if-found}, @ovar{action-if-not-found}) @acindex{EGREP_CPP} @var{program} is the text of a C or C++ program, on which shell variable, back quote, and backslash substitutions are performed. If the output of running the preprocessor on @var{program} matches the extended regular expression @var{pattern}, execute shell commands @var{action-if-found}, otherwise execute @var{action-if-not-found}. See below for some problems involving this macro. @end defmac @code{AC_EGREP_CPP} and @code{AC_EGREP_HEADER} should be used with care, as preprocessors can insert line breaks between output tokens. For example, the preprocessor might transform this: @example #define MAJOR 2 #define MINOR 23 Version MAJOR . MINOR @end example @noindent into this: @example Version 2 . 23 @end example @noindent Because preprocessors are allowed to insert white space, change escapes in string contants, insert backlash-newline pairs, or do any of a number of things that do not change the meaning of the preprocessed program, it is better to rely on @code{AC_PREPROC_IFELSE} than to resort to @code{AC_EGREP_CPP} or @code{AC_EGREP_HEADER}. @node Running the Compiler @section Running the Compiler To check for a syntax feature of the current language's (@pxref{Language Choice}) compiler, such as whether it recognizes a certain keyword, or simply to try some library feature, use @code{AC_COMPILE_IFELSE} to try to compile a small program that uses that feature. @defmac AC_COMPILE_IFELSE (@var{input}, @ovar{action-if-true}, @ @ovar{action-if-false}) @acindex{COMPILE_IFELSE} Run the compiler and compilation flags of the current language (@pxref{Language Choice}) on the @var{input}, run the shell commands @var{action-if-true} on success, @var{action-if-false} otherwise. The @var{input} can be made by @code{AC_LANG_PROGRAM} and friends. It is customary to report unexpected failures with @code{AC_MSG_FAILURE}. This macro does not try to link; use @code{AC_LINK_IFELSE} if you need to do that (@pxref{Running the Linker}). If needed, @var{action-if-true} can further access the just-compiled object file @file{conftest.$OBJEXT}. This macro uses @code{AC_REQUIRE} for the compiler associated with the current language, which means that if the compiler has not yet been determined, the compiler determination will be made prior to the body of the outermost @code{AC_DEFUN} macro that triggered this macro to expand (@pxref{Expanded Before Required}). @end defmac @ovindex ERL For tests in Erlang, the @var{input} must be the source code of a module named @code{conftest}. @code{AC_COMPILE_IFELSE} generates a @file{conftest.beam} file that can be interpreted by the Erlang virtual machine (@code{ERL}). It is recommended to use @code{AC_LANG_PROGRAM} to specify the test program, to ensure that the Erlang module has the right name. @node Running the Linker @section Running the Linker To check for a library, a function, or a global variable, Autoconf @command{configure} scripts try to compile and link a small program that uses it. This is unlike Metaconfig, which by default uses @code{nm} or @code{ar} on the C library to try to figure out which functions are available. Trying to link with the function is usually a more reliable approach because it avoids dealing with the variations in the options and output formats of @code{nm} and @code{ar} and in the location of the standard libraries. It also allows configuring for cross-compilation or checking a function's runtime behavior if needed. On the other hand, it can be slower than scanning the libraries once, but accuracy is more important than speed. @code{AC_LINK_IFELSE} is used to compile test programs to test for functions and global variables. It is also used by @code{AC_CHECK_LIB} to check for libraries (@pxref{Libraries}), by adding the library being checked for to @code{LIBS} temporarily and trying to link a small program. @anchor{AC_LINK_IFELSE} @defmac AC_LINK_IFELSE (@var{input}, @ovar{action-if-true}, @ @ovar{action-if-false}) @acindex{LINK_IFELSE} Run the compiler (and compilation flags) and the linker of the current language (@pxref{Language Choice}) on the @var{input}, run the shell commands @var{action-if-true} on success, @var{action-if-false} otherwise. The @var{input} can be made by @code{AC_LANG_PROGRAM} and friends. If needed, @var{action-if-true} can further access the just-linked program file @file{conftest$EXEEXT}. @code{LDFLAGS} and @code{LIBS} are used for linking, in addition to the current compilation flags. It is customary to report unexpected failures with @code{AC_MSG_FAILURE}. This macro does not try to execute the program; use @code{AC_RUN_IFELSE} if you need to do that (@pxref{Runtime}). @end defmac The @code{AC_LINK_IFELSE} macro cannot be used for Erlang tests, since Erlang programs are interpreted and do not require linking. @node Runtime @section Checking Runtime Behavior Sometimes you need to find out how a system performs at runtime, such as whether a given function has a certain capability or bug. If you can, make such checks when your program runs instead of when it is configured. You can check for things like the machine's endianness when your program initializes itself. If you really need to test for a runtime behavior while configuring, you can write a test program to determine the result, and compile and run it using @code{AC_RUN_IFELSE}. Avoid running test programs if possible, because this prevents people from configuring your package for cross-compiling. @anchor{AC_RUN_IFELSE} @defmac AC_RUN_IFELSE (@var{input}, @ovar{action-if-true}, @ @ovar{action-if-false}, @dvar{action-if-cross-compiling, AC_MSG_FAILURE}) @acindex{RUN_IFELSE} Run the compiler (and compilation flags) and the linker of the current language (@pxref{Language Choice}) on the @var{input}, then execute the resulting program. If the program returns an exit status of 0 when executed, run shell commands @var{action-if-true}. Otherwise, run shell commands @var{action-if-false}. The @var{input} can be made by @code{AC_LANG_PROGRAM} and friends. @code{LDFLAGS} and @code{LIBS} are used for linking, in addition to the compilation flags of the current language (@pxref{Language Choice}). Additionally, @var{action-if-true} can run @command{./conftest$EXEEXT} for further testing. In the @var{action-if-false} section, the failing exit status is available in the shell variable @samp{$?}. This exit status might be that of a failed compilation, or it might be that of a failed program execution. If cross-compilation mode is enabled (this is the case if either the compiler being used does not produce executables that run on the system where @command{configure} is being run, or if the options @code{--build} and @code{--host} were both specified and their values are different), then the test program is not run. If the optional shell commands @var{action-if-cross-compiling} are given, those commands are run instead; typically these commands provide pessimistic defaults that allow cross-compilation to work even if the guess was wrong. If the fourth argument is empty or omitted, but cross-compilation is detected, then @command{configure} prints an error message and exits. If you want your package to be useful in a cross-compilation scenario, you @emph{should} provide a non-empty @var{action-if-cross-compiling} clause, as well as wrap the @code{AC_RUN_IFELSE} compilation inside an @code{AC_CACHE_CHECK} (@pxref{Caching Results}) which allows the user to override the pessimistic default if needed. It is customary to report unexpected failures with @code{AC_MSG_FAILURE}. @end defmac @command{autoconf} prints a warning message when creating @command{configure} each time it encounters a call to @code{AC_RUN_IFELSE} with no @var{action-if-cross-compiling} argument given. If you are not concerned about users configuring your package for cross-compilation, you may ignore the warning. A few of the macros distributed with Autoconf produce this warning message; but if this is a problem for you, please report it as a bug, along with an appropriate pessimistic guess to use instead. To configure for cross-compiling you can also choose a value for those parameters based on the canonical system name (@pxref{Manual Configuration}). Alternatively, set up a test results cache file with the correct values for the host system (@pxref{Caching Results}). @ovindex cross_compiling To provide a default for calls of @code{AC_RUN_IFELSE} that are embedded in other macros, including a few of the ones that come with Autoconf, you can test whether the shell variable @code{cross_compiling} is set to @samp{yes}, and then use an alternate method to get the results instead of calling the macros. It is also permissible to temporarily assign to @code{cross_compiling} in order to force tests to behave as though they are in a cross-compilation environment, particularly since this provides a way to test your @var{action-if-cross-compiling} even when you are not using a cross-compiler. @example # We temporarily set cross-compile mode to force AC_COMPUTE_INT # to use the slow link-only method save_cross_compiling=$cross_compiling cross_compiling=yes AC_COMPUTE_INT([@dots{}]) cross_compiling=$save_cross_compiling @end example A C or C++ runtime test should be portable. @xref{Portable C and C++}. Erlang tests must exit themselves the Erlang VM by calling the @code{halt/1} function: the given status code is used to determine the success of the test (status is @code{0}) or its failure (status is different than @code{0}), as explained above. It must be noted that data output through the standard output (e.g., using @code{io:format/2}) may be truncated when halting the VM. Therefore, if a test must output configuration information, it is recommended to create and to output data into the temporary file named @file{conftest.out}, using the functions of module @code{file}. The @code{conftest.out} file is automatically deleted by the @code{AC_RUN_IFELSE} macro. For instance, a simplified implementation of Autoconf's @code{AC_ERLANG_SUBST_LIB_DIR} macro is: @example AC_INIT([LibdirTest], [1.0], [bug-libdirtest@@example.org]) AC_ERLANG_NEED_ERL AC_LANG(Erlang) AC_RUN_IFELSE( [AC_LANG_PROGRAM([], [dnl file:write_file("conftest.out", code:lib_dir()), halt(0)])], [echo "code:lib_dir() returned: `cat conftest.out`"], [AC_MSG_FAILURE([test Erlang program execution failed])]) @end example @node Systemology @section Systemology @cindex Systemology This section aims at presenting some systems and pointers to documentation. It may help you addressing particular problems reported by users. @uref{https://@/en.wikipedia.org/@/wiki/@/POSIX, Posix-conforming systems} are derived from the @uref{https://@/en.wikipedia.org/@/wiki/@/Unix, Unix operating system}. The @uref{http://@/bhami.com/@/rosetta.html, Rosetta Stone for Unix} contains a table correlating the features of various Posix-conforming systems. @uref{https://@/www.levenez.com/@/unix/, Unix History} is a simplified diagram of how many Unix systems were derived from each other. @uref{http://@/heirloom.sourceforge.net/, The Heirloom Project} provides some variants of traditional implementations of Unix utilities. @table @asis @item Darwin @cindex Darwin Darwin is also known as Mac OS X@. Beware that the file system @emph{can} be case-preserving, but case insensitive. This can cause nasty problems, since for instance the installation attempt for a package having an @file{INSTALL} file can result in @samp{make install} report that nothing was to be done! That's all dependent on whether the file system is a UFS (case sensitive) or HFS+ (case preserving). By default Apple wants you to install the OS on HFS+. Unfortunately, there are some pieces of software which really need to be built on UFS@. We may want to rebuild Darwin to have both UFS and HFS+ available (and put the /local/build tree on the UFS). @item QNX 4.25 @cindex QNX 4.25 @c FIXME: Please, if you feel like writing something more precise, @c it'd be great. In particular, I can't understand the difference with @c QNX Neutrino. QNX is a realtime operating system running on Intel architecture meant to be scalable from the small embedded systems to the hundred processor super-computer. It claims to be Posix certified. More information is available on the @uref{https://@/blackberry.qnx.com/@/en, QNX home page}. @item Unix version 7 @cindex Unix version 7 @cindex V7 Officially this was called the ``Seventh Edition'' of ``the UNIX time-sharing system'' but we use the more-common name ``Unix version 7''. Documentation is available in the @uref{https://@/s3.amazonaws.com/@/plan9-bell-labs/@/7thEdMan/@/index.html, Unix Seventh Edition Manual}. Previous versions of Unix are called ``Unix version 6'', etc., but they were not as widely used. @end table @node Multiple Cases @section Multiple Cases Some operations are accomplished in several possible ways, depending on the OS variant. Checking for them essentially requires a ``case statement''. Autoconf does not directly provide one; however, it is easy to simulate by using a shell variable to keep track of whether a way to perform the operation has been found yet. Here is an example that uses the shell variable @code{fstype} to keep track of whether the remaining cases need to be checked. Note that since the value of @code{fstype} is under our control, we don't have to use the longer @samp{test "x$fstype" = xno}. @example @group AC_MSG_CHECKING([how to get file system type]) fstype=no # The order of these tests is important. AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include #include ]])], [AC_DEFINE([FSTYPE_STATVFS], [1], [Define if statvfs exists.]) fstype=SVR4]) if test $fstype = no; then AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include #include ]])], [AC_DEFINE([FSTYPE_USG_STATFS], [1], [Define if USG statfs.]) fstype=SVR3]) fi if test $fstype = no; then AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include #include ]])]), [AC_DEFINE([FSTYPE_AIX_STATFS], [1], [Define if AIX statfs.]) fstype=AIX]) fi # (more cases omitted here) AC_MSG_RESULT([$fstype]) @end group @end example @c ====================================================== Results of Tests. @node Results @chapter Results of Tests Once @command{configure} has determined whether a feature exists, what can it do to record that information? There are four sorts of things it can do: define a C preprocessor symbol, set a variable in the output files, save the result in a cache file for future @command{configure} runs, and print a message letting the user know the result of the test. @menu * Defining Symbols:: Defining C preprocessor symbols * Setting Output Variables:: Replacing variables in output files * Special Chars in Variables:: Characters to beware of in variables * Caching Results:: Speeding up subsequent @command{configure} runs * Printing Messages:: Notifying @command{configure} users @end menu @node Defining Symbols @section Defining C Preprocessor Symbols A common action to take in response to a feature test is to define a C preprocessor symbol indicating the results of the test. That is done by calling @code{AC_DEFINE} or @code{AC_DEFINE_UNQUOTED}. By default, @code{AC_OUTPUT} places the symbols defined by these macros into the output variable @code{DEFS}, which contains an option @option{-D@var{symbol}=@var{value}} for each symbol defined. Unlike in Autoconf version 1, there is no variable @code{DEFS} defined while @command{configure} is running. To check whether Autoconf macros have already defined a certain C preprocessor symbol, test the value of the appropriate cache variable, as in this example: @example AC_CHECK_FUNC([vprintf], [AC_DEFINE([HAVE_VPRINTF], [1], [Define if vprintf exists.])]) if test "x$ac_cv_func_vprintf" != xyes; then AC_CHECK_FUNC([_doprnt], [AC_DEFINE([HAVE_DOPRNT], [1], [Define if _doprnt exists.])]) fi @end example If @code{AC_CONFIG_HEADERS} has been called, then instead of creating @code{DEFS}, @code{AC_OUTPUT} creates a header file by substituting the correct values into @code{#define} statements in a template file. @xref{Configuration Headers}, for more information about this kind of output. @defmac AC_DEFINE (@var{variable}, @var{value}, @ovar{description}) @defmacx AC_DEFINE (@var{variable}) @cvindex @var{variable} @acindex{DEFINE} Define @var{variable} to @var{value} (verbatim), by defining a C preprocessor macro for @var{variable}. @var{variable} should be a C identifier, optionally suffixed by a parenthesized argument list to define a C preprocessor macro with arguments. The macro argument list, if present, should be a comma-separated list of C identifiers, possibly terminated by an ellipsis @samp{...} if C99-or-later syntax is employed. @var{variable} should not contain comments, white space, trigraphs, backslash-newlines, universal character names, or non-ASCII characters. @var{value} may contain backslash-escaped newlines, which will be preserved if you use @code{AC_CONFIG_HEADERS} but flattened if passed via @code{@@DEFS@@} (with no effect on the compilation, since the preprocessor sees only one line in the first place). @var{value} should not contain raw newlines. If you are not using @code{AC_CONFIG_HEADERS}, @var{value} should not contain any @samp{#} characters, as @command{make} tends to eat them. To use a shell variable, use @code{AC_DEFINE_UNQUOTED} instead. @var{description} is only useful if you are using @code{AC_CONFIG_HEADERS}. In this case, @var{description} is put into the generated @file{config.h.in} as the comment before the macro define. The following example defines the C preprocessor variable @code{EQUATION} to be the string constant @samp{"$a > $b"}: @example AC_DEFINE([EQUATION], ["$a > $b"], [Equation string.]) @end example If neither @var{value} nor @var{description} are given, then @var{value} defaults to 1 instead of to the empty string. This is for backwards compatibility with older versions of Autoconf, but this usage is obsolescent and may be withdrawn in future versions of Autoconf. If the @var{variable} is a literal string, it is passed to @code{m4_pattern_allow} (@pxref{Forbidden Patterns}). If multiple @code{AC_DEFINE} statements are executed for the same @var{variable} name (not counting any parenthesized argument list), the last one wins. @end defmac @defmac AC_DEFINE_UNQUOTED (@var{variable}, @var{value}, @ovar{description}) @defmacx AC_DEFINE_UNQUOTED (@var{variable}) @acindex{DEFINE_UNQUOTED} @cvindex @var{variable} Like @code{AC_DEFINE}, but three shell expansions are performed---once---on @var{variable} and @var{value}: variable expansion (@samp{$}), command substitution (@samp{`}), and backslash escaping (@samp{\}), as if in an unquoted here-document. Single and double quote characters in the value have no special meaning. Use this macro instead of @code{AC_DEFINE} when @var{variable} or @var{value} is a shell variable. Examples: @example AC_DEFINE_UNQUOTED([config_machfile], ["$machfile"], [Configuration machine file.]) AC_DEFINE_UNQUOTED([GETGROUPS_T], [$ac_cv_type_getgroups], [getgroups return type.]) AC_DEFINE_UNQUOTED([$ac_tr_hdr], [1], [Translated header name.]) @end example @end defmac Due to a syntactical oddity of the Bourne shell, do not use semicolons to separate @code{AC_DEFINE} or @code{AC_DEFINE_UNQUOTED} calls from other macro calls or shell code; that can cause syntax errors in the resulting @command{configure} script. Use either blanks or newlines. That is, do this: @example AC_CHECK_HEADER([elf.h], [AC_DEFINE([SVR4], [1], [System V Release 4]) LIBS="-lelf $LIBS"]) @end example @noindent or this: @example AC_CHECK_HEADER([elf.h], [AC_DEFINE([SVR4], [1], [System V Release 4]) LIBS="-lelf $LIBS"]) @end example @noindent instead of this: @example AC_CHECK_HEADER([elf.h], [AC_DEFINE([SVR4], [1], [System V Release 4]); LIBS="-lelf $LIBS"]) @end example @node Setting Output Variables @section Setting Output Variables @cindex Output variables Another way to record the results of tests is to set @dfn{output variables}, which are shell variables whose values are substituted into files that @command{configure} outputs. The two macros below create new output variables. @xref{Preset Output Variables}, for a list of output variables that are always available. @defmac AC_SUBST (@var{variable}, @ovar{value}) @acindex{SUBST} Create an output variable from a shell variable. Make @code{AC_OUTPUT} substitute the variable @var{variable} into output files (typically one or more makefiles). This means that @code{AC_OUTPUT} replaces instances of @samp{@@@var{variable}@@} in input files with the value that the shell variable @var{variable} has when @code{AC_OUTPUT} is called. The value can contain any non-@code{NUL} character, including newline. If you are using Automake 1.11 or newer, for newlines in values you might want to consider using @code{AM_SUBST_NOTMAKE} to prevent @command{automake} from adding a line @code{@var{variable} = @@@var{variable}@@} to the @file{Makefile.in} files (@pxref{Optional, , Automake, automake, Other things Automake recognizes}). Variable occurrences should not overlap: e.g., an input file should not contain @samp{@@@var{var1}@@@var{var2}@@} if @var{var1} and @var{var2} are variable names. The substituted value is not rescanned for more output variables; occurrences of @samp{@@@var{variable}@@} in the value are inserted literally into the output file. (The algorithm uses the special marker @code{|#_!!_#|} internally, so neither the substituted value nor the output file may contain @code{|#_!!_#|}.) If @var{value} is given, in addition assign it to @var{variable}. The string @var{variable} is passed to @code{m4_pattern_allow} (@pxref{Forbidden Patterns}). @var{variable} is not further expanded, even if there is another macro by the same name. @end defmac @defmac AC_SUBST_FILE (@var{variable}) @acindex{SUBST_FILE} Another way to create an output variable from a shell variable. Make @code{AC_OUTPUT} insert (without substitutions) the contents of the file named by shell variable @var{variable} into output files. This means that @code{AC_OUTPUT} replaces instances of @samp{@@@var{variable}@@} in output files (such as @file{Makefile.in}) with the contents of the file that the shell variable @var{variable} names when @code{AC_OUTPUT} is called. Set the variable to @file{/dev/null} for cases that do not have a file to insert. This substitution occurs only when the @samp{@@@var{variable}@@} is on a line by itself, optionally surrounded by spaces and tabs. The substitution replaces the whole line, including the spaces, tabs, and the terminating newline. This macro is useful for inserting makefile fragments containing special dependencies or other @command{make} directives for particular host or target types into makefiles. For example, @file{configure.ac} could contain: @example AC_SUBST_FILE([host_frag]) host_frag=$srcdir/conf/sun4.mh @end example @noindent and then a @file{Makefile.in} could contain: @example @@host_frag@@ @end example The string @var{variable} is passed to @code{m4_pattern_allow} (@pxref{Forbidden Patterns}). @end defmac @cindex Precious Variable @cindex Variable, Precious Running @command{configure} in varying environments can be extremely dangerous. If for instance the user runs @samp{CC=bizarre-cc ./configure}, then the cache, @file{config.h}, and many other output files depend upon @command{bizarre-cc} being the C compiler. If for some reason the user runs @command{./configure} again, or if it is run via @samp{./config.status --recheck}, (@xref{Automatic Remaking}, and @pxref{config.status Invocation}), then the configuration can be inconsistent, composed of results depending upon two different compilers. Environment variables that affect this situation, such as @samp{CC} above, are called @dfn{precious variables}, and can be declared as such by @code{AC_ARG_VAR}. @defmac AC_ARG_VAR (@var{variable}, @var{description}) @acindex{ARG_VAR} Declare @var{variable} is a precious variable, and include its @var{description} in the variable section of @samp{./configure --help}. Being precious means that @itemize @minus @item @var{variable} is substituted via @code{AC_SUBST}. @item The value of @var{variable} when @command{configure} was launched is saved in the cache, including if it was not specified on the command line but via the environment. Indeed, while @command{configure} can notice the definition of @code{CC} in @samp{./configure CC=bizarre-cc}, it is impossible to notice it in @samp{CC=bizarre-cc ./configure}, which, unfortunately, is what most users do. We emphasize that it is the @emph{initial} value of @var{variable} which is saved, not that found during the execution of @command{configure}. Indeed, specifying @samp{./configure FOO=foo} and letting @samp{./configure} guess that @code{FOO} is @code{foo} can be two different things. @item @var{variable} is checked for consistency between two @command{configure} runs. For instance: @example $ @kbd{./configure --silent --config-cache} $ @kbd{CC=cc ./configure --silent --config-cache} configure: error: 'CC' was not set in the previous run configure: error: changes in the environment can compromise \ the build configure: error: run 'make distclean' and/or \ 'rm config.cache' and start over @end example @noindent and similarly if the variable is unset, or if its content is changed. If the content has white space changes only, then the error is degraded to a warning only, but the old value is reused. @item @var{variable} is kept during automatic reconfiguration (@pxref{config.status Invocation}) as if it had been passed as a command line argument, including when no cache is used: @example $ @kbd{CC=/usr/bin/cc ./configure var=raboof --silent} $ @kbd{./config.status --recheck} running CONFIG_SHELL=/bin/sh /bin/sh ./configure var=raboof \ CC=/usr/bin/cc --no-create --no-recursion @end example @end itemize @end defmac @node Special Chars in Variables @section Special Characters in Output Variables @cindex Output variables, special characters in Many output variables are intended to be evaluated both by @command{make} and by the shell. Some characters are expanded differently in these two contexts, so to avoid confusion these variables' values should not contain any of the following characters: @example " # $ & ' ( ) * ; < > ? [ \ ^ ` | @end example Also, these variables' values should neither contain newlines, nor start with @samp{~}, nor contain white space or @samp{:} immediately followed by @samp{~}. The values can contain nonempty sequences of white space characters like tabs and spaces, but each such sequence might arbitrarily be replaced by a single space during substitution. These restrictions apply both to the values that @command{configure} computes, and to the values set directly by the user. For example, the following invocations of @command{configure} are problematic, since they attempt to use special characters within @code{CPPFLAGS} and white space within @code{$(srcdir)}: @example CPPFLAGS='-DOUCH="&\"#$*?"' '../My Source/ouch-1.0/configure' '../My Source/ouch-1.0/configure' CPPFLAGS='-DOUCH="&\"#$*?"' @end example @node Caching Results @section Caching Results @cindex Cache To avoid checking for the same features repeatedly in various @command{configure} scripts (or in repeated runs of one script), @command{configure} can optionally save the results of many checks in a @dfn{cache file} (@pxref{Cache Files}). If a @command{configure} script runs with caching enabled and finds a cache file, it reads the results of previous runs from the cache and avoids rerunning those checks. As a result, @command{configure} can then run much faster than if it had to perform all of the checks every time. @defmac AC_CACHE_VAL (@var{cache-id}, @var{commands-to-set-it}) @acindex{CACHE_VAL} Ensure that the results of the check identified by @var{cache-id} are available. If the results of the check were in the cache file that was read, and @command{configure} was not given the @option{--quiet} or @option{--silent} option, print a message saying that the result was cached; otherwise, run the shell commands @var{commands-to-set-it}. If the shell commands are run to determine the value, the value is saved in the cache file just before @command{configure} creates its output files. @xref{Cache Variable Names}, for how to choose the name of the @var{cache-id} variable. The @var{commands-to-set-it} @emph{must have no side effects} except for setting the variable @var{cache-id}, see below. @end defmac @defmac AC_CACHE_CHECK (@var{message}, @var{cache-id}, @ @var{commands-to-set-it}) @acindex{CACHE_CHECK} A wrapper for @code{AC_CACHE_VAL} that takes care of printing the messages. This macro provides a convenient shorthand for the most common way to use these macros. It calls @code{AC_MSG_CHECKING} for @var{message}, then @code{AC_CACHE_VAL} with the @var{cache-id} and @var{commands} arguments, and @code{AC_MSG_RESULT} with @var{cache-id}. The @var{commands-to-set-it} @emph{must have no side effects} except for setting the variable @var{cache-id}, see below. @end defmac It is common to find buggy macros using @code{AC_CACHE_VAL} or @code{AC_CACHE_CHECK}, because people are tempted to call @code{AC_DEFINE} in the @var{commands-to-set-it}. Instead, the code that @emph{follows} the call to @code{AC_CACHE_VAL} should call @code{AC_DEFINE}, by examining the value of the cache variable. For instance, the following macro is broken: @example @c If you change this example, adjust tests/base.at:AC_CACHE_CHECK. @group AC_DEFUN([AC_SHELL_TRUE], [AC_CACHE_CHECK([whether true(1) works], [my_cv_shell_true_works], [my_cv_shell_true_works=no (true) 2>/dev/null && my_cv_shell_true_works=yes if test "x$my_cv_shell_true_works" = xyes; then AC_DEFINE([TRUE_WORKS], [1], [Define if 'true(1)' works properly.]) fi]) ]) @end group @end example @noindent This fails if the cache is enabled: the second time this macro is run, @code{TRUE_WORKS} @emph{will not be defined}. The proper implementation is: @example @c If you change this example, adjust tests/base.at:AC_CACHE_CHECK. @group AC_DEFUN([AC_SHELL_TRUE], [AC_CACHE_CHECK([whether true(1) works], [my_cv_shell_true_works], [my_cv_shell_true_works=no (true) 2>/dev/null && my_cv_shell_true_works=yes]) if test "x$my_cv_shell_true_works" = xyes; then AC_DEFINE([TRUE_WORKS], [1], [Define if 'true(1)' works properly.]) fi ]) @end group @end example Also, @var{commands-to-set-it} should not print any messages, for example with @code{AC_MSG_CHECKING}; do that before calling @code{AC_CACHE_VAL}, so the messages are printed regardless of whether the results of the check are retrieved from the cache or determined by running the shell commands. @menu * Cache Variable Names:: Shell variables used in caches * Cache Files:: Files @command{configure} uses for caching * Cache Checkpointing:: Loading and saving the cache file @end menu @node Cache Variable Names @subsection Cache Variable Names @cindex Cache variable The names of cache variables should have the following format: @example @var{package-prefix}_cv_@var{value-type}_@var{specific-value}_@ovar{additional-options} @end example @noindent for example, @samp{ac_cv_header_stat_broken} or @samp{ac_cv_prog_gcc_traditional}. The parts of the variable name are: @table @asis @item @var{package-prefix} An abbreviation for your package or organization; the same prefix you begin local Autoconf macros with, except lowercase by convention. For cache values used by the distributed Autoconf macros, this value is @samp{ac}. @item @code{_cv_} Indicates that this shell variable is a cache value. This string @emph{must} be present in the variable name, including the leading underscore. @item @var{value-type} A convention for classifying cache values, to produce a rational naming system. The values used in Autoconf are listed in @ref{Macro Names}. @item @var{specific-value} Which member of the class of cache values this test applies to. For example, which function (@samp{alloca}), program (@samp{gcc}), or output variable (@samp{INSTALL}). @item @var{additional-options} Any particular behavior of the specific member that this test applies to. For example, @samp{broken} or @samp{set}. This part of the name may be omitted if it does not apply. @end table The values assigned to cache variables may not contain newlines. Usually, their values are Boolean (@samp{yes} or @samp{no}) or the names of files or functions; so this is not an important restriction. @ref{Cache Variable Index} for an index of cache variables with documented semantics. @node Cache Files @subsection Cache Files A cache file is a shell script that caches the results of configure tests run on one system so they can be shared between configure scripts and configure runs. It is not useful on other systems. If its contents are invalid for some reason, the user may delete or edit it, or override documented cache variables on the @command{configure} command line. By default, @command{configure} uses no cache file, to avoid problems caused by accidental use of stale cache files. To enable caching, @command{configure} accepts @option{--config-cache} (or @option{-C}) to cache results in the file @file{config.cache}. Alternatively, @option{--cache-file=@var{file}} specifies that @var{file} be the cache file. The cache file is created if it does not exist already. When @command{configure} calls @command{configure} scripts in subdirectories, it uses the @option{--cache-file} argument so that they share the same cache. @xref{Subdirectories}, for information on configuring subdirectories with the @code{AC_CONFIG_SUBDIRS} macro. @file{config.status} only pays attention to the cache file if it is given the @option{--recheck} option, which makes it rerun @command{configure}. It is wrong to try to distribute cache files for particular system types. There is too much room for error in doing that, and too much administrative overhead in maintaining them. For any features that can't be guessed automatically, use the standard method of the canonical system type and linking files (@pxref{Manual Configuration}). The site initialization script can specify a site-wide cache file to use, instead of the usual per-program cache. In this case, the cache file gradually accumulates information whenever someone runs a new @command{configure} script. (Running @command{configure} merges the new cache results with the existing cache file.) This may cause problems, however, if the system configuration (e.g., the installed libraries or compilers) changes and the stale cache file is not deleted. If @command{configure} is interrupted at the right time when it updates a cache file outside of the build directory where the @command{configure} script is run, it may leave behind a temporary file named after the cache file with digits following it. You may safely delete such a file. @node Cache Checkpointing @subsection Cache Checkpointing If your configure script, or a macro called from @file{configure.ac}, happens to abort the configure process, it may be useful to checkpoint the cache a few times at key points using @code{AC_CACHE_SAVE}. Doing so reduces the amount of time it takes to rerun the configure script with (hopefully) the error that caused the previous abort corrected. @c FIXME: Do we really want to document this guy? @defmac AC_CACHE_LOAD @acindex{CACHE_LOAD} Loads values from existing cache file, or creates a new cache file if a cache file is not found. Called automatically from @code{AC_INIT}. @end defmac @defmac AC_CACHE_SAVE @acindex{CACHE_SAVE} Flushes all cached values to the cache file. Called automatically from @code{AC_OUTPUT}, but it can be quite useful to call @code{AC_CACHE_SAVE} at key points in @file{configure.ac}. @end defmac For instance: @example @r{ @dots{} AC_INIT, etc. @dots{}} @group # Checks for programs. AC_PROG_CC AC_PROG_AWK @r{ @dots{} more program checks @dots{}} AC_CACHE_SAVE @end group @group # Checks for libraries. AC_CHECK_LIB([nsl], [gethostbyname]) AC_CHECK_LIB([socket], [connect]) @r{ @dots{} more lib checks @dots{}} AC_CACHE_SAVE @end group @group # Might abort@dots{} AM_PATH_GTK([1.0.2], [], [AC_MSG_ERROR([GTK not in path])]) AM_PATH_GTKMM([0.9.5], [], [AC_MSG_ERROR([GTK not in path])]) @end group @r{ @dots{} AC_OUTPUT, etc. @dots{}} @end example @node Printing Messages @section Printing Messages @cindex Messages, from @command{configure} @command{configure} scripts need to give users running them several kinds of information. The following macros print messages in ways appropriate for each kind. The arguments to all of them get enclosed in shell double quotes, so the shell performs variable and back-quote substitution on them. These macros are all wrappers around the @command{echo} shell command. They direct output to the appropriate file descriptor (@pxref{File Descriptor Macros}). @command{configure} scripts should rarely need to run @command{echo} directly to print messages for the user. Using these macros makes it easy to change how and when each kind of message is printed; such changes need only be made to the macro definitions and all the callers change automatically. To diagnose static issues, i.e., when @command{autoconf} is run, see @ref{Diagnostic Macros}. @defmac AC_MSG_CHECKING (@var{feature-description}) @acindex{MSG_CHECKING} Notify the user that @command{configure} is checking for a particular feature. This macro prints a message that starts with @samp{checking } and ends with @samp{...} and no newline. It must be followed by a call to @code{AC_MSG_RESULT} to print the result of the check and the newline. The @var{feature-description} should be something like @samp{whether the Fortran compiler accepts C++ comments} or @samp{for _Alignof}. This macro prints nothing if @command{configure} is run with the @option{--quiet} or @option{--silent} option. @end defmac @anchor{AC_MSG_RESULT} @defmac AC_MSG_RESULT (@var{result-description}) @acindex{MSG_RESULT} Notify the user of the results of a check. @var{result-description} is almost always the value of the cache variable for the check, typically @samp{yes}, @samp{no}, or a file name. This macro should follow a call to @code{AC_MSG_CHECKING}, and the @var{result-description} should be the completion of the message printed by the call to @code{AC_MSG_CHECKING}. This macro prints nothing if @command{configure} is run with the @option{--quiet} or @option{--silent} option. @end defmac @anchor{AC_MSG_NOTICE} @defmac AC_MSG_NOTICE (@var{message}) @acindex{MSG_NOTICE} Deliver the @var{message} to the user. It is useful mainly to print a general description of the overall purpose of a group of feature checks, e.g., @example AC_MSG_NOTICE([checking if stack overflow is detectable]) @end example This macro prints nothing if @command{configure} is run with the @option{--quiet} or @option{--silent} option. @end defmac @anchor{AC_MSG_ERROR} @defmac AC_MSG_ERROR (@var{error-description}, @dvar{exit-status, $?/1}) @acindex{MSG_ERROR} Notify the user of an error that prevents @command{configure} from completing. This macro prints an error message to the standard error output and exits @command{configure} with @var{exit-status} (@samp{$?} by default, except that @samp{0} is converted to @samp{1}). @var{error-description} should be something like @samp{invalid value $HOME for \$HOME}. The @var{error-description} should start with a lower-case letter, and ``cannot'' is preferred to ``can't''. @end defmac @defmac AC_MSG_FAILURE (@var{error-description}, @ovar{exit-status}) @acindex{MSG_FAILURE} This @code{AC_MSG_ERROR} wrapper notifies the user of an error that prevents @command{configure} from completing @emph{and} that additional details are provided in @file{config.log}. This is typically used when abnormal results are found during a compilation. @end defmac @anchor{AC_MSG_WARN} @defmac AC_MSG_WARN (@var{problem-description}) @acindex{MSG_WARN} Notify the @command{configure} user of a possible problem. This macro prints the message to the standard error output; @command{configure} continues running afterward, so macros that call @code{AC_MSG_WARN} should provide a default (back-up) behavior for the situations they warn about. @var{problem-description} should be something like @samp{ln -s seems to make hard links}. @end defmac @c ====================================================== Programming in M4. @node Programming in M4 @chapter Programming in M4 @cindex M4 Autoconf is written on top of two layers: @dfn{M4sugar}, which provides convenient macros for pure M4 programming, and @dfn{M4sh}, which provides macros dedicated to shell script generation. As of this version of Autoconf, these two layers still contain experimental macros, whose interface might change in the future. As a matter of fact, @emph{anything that is not documented must not be used}. @menu * M4 Quotation:: Protecting macros from unwanted expansion * Using autom4te:: The Autoconf executables backbone * Programming in M4sugar:: Convenient pure M4 macros * Debugging via autom4te:: Figuring out what M4 was doing @end menu @node M4 Quotation @section M4 Quotation @cindex M4 quotation @cindex quotation The most common problem with existing macros is an improper quotation. This section, which users of Autoconf can skip, but which macro writers @emph{must} read, first justifies the quotation scheme that was chosen for Autoconf and then ends with a rule of thumb. Understanding the former helps one to follow the latter. @menu * Active Characters:: Characters that change the behavior of M4 * One Macro Call:: Quotation and one macro call * Quoting and Parameters:: M4 vs. shell parameters * Quotation and Nested Macros:: Macros calling macros * Changequote is Evil:: Worse than INTERCAL: M4 + changequote * Quadrigraphs:: Another way to escape special characters * Balancing Parentheses:: Dealing with unbalanced parentheses * Quotation Rule Of Thumb:: One parenthesis, one quote @end menu @node Active Characters @subsection Active Characters To fully understand where proper quotation is important, you first need to know what the special characters are in Autoconf: @samp{#} introduces a comment inside which no macro expansion is performed, @samp{,} separates arguments, @samp{[} and @samp{]} are the quotes themselves@footnote{By itself, M4 uses @samp{`} and @samp{'}; it is the M4sugar layer that sets up the preferred quotes of @samp{[} and @samp{]}.}, @samp{(} and @samp{)} (which M4 tries to match by pairs), and finally @samp{$} inside a macro definition. In order to understand the delicate case of macro calls, we first have to present some obvious failures. Below they are ``obvious-ified'', but when you find them in real life, they are usually in disguise. Comments, introduced by a hash and running up to the newline, are opaque tokens to the top level: active characters are turned off, and there is no macro expansion: @example # define([def], ine) @result{}# define([def], ine) @end example Each time there can be a macro expansion, there is a quotation expansion, i.e., one level of quotes is stripped: @example int tab[10]; @result{}int tab10; [int tab[10];] @result{}int tab[10]; @end example Without this in mind, the reader might try hopelessly to use her macro @code{array}: @example define([array], [int tab[10];]) array @result{}int tab10; [array] @result{}array @end example @noindent How can you correctly output the intended results@footnote{Using @code{defn}.}? @node One Macro Call @subsection One Macro Call Let's proceed on the interaction between active characters and macros with this small macro, which just returns its first argument: @example define([car], [$1]) @end example @noindent The two pairs of quotes above are not part of the arguments of @code{define}; rather, they are understood by the top level when it tries to find the arguments of @code{define}. Therefore, assuming @code{car} is not already defined, it is equivalent to write: @example define(car, $1) @end example @noindent But, while it is acceptable for a @file{configure.ac} to avoid unnecessary quotes, it is bad practice for Autoconf macros which must both be more robust and also advocate perfect style. At the top level, there are only two possibilities: either you quote or you don't: @example car(foo, bar, baz) @result{}foo [car(foo, bar, baz)] @result{}car(foo, bar, baz) @end example Let's pay attention to the special characters: @example car(#) @error{}EOF in argument list @end example The closing parenthesis is hidden in the comment; with a hypothetical quoting, the top level understood it this way: @example car([#)] @end example @noindent Proper quotation, of course, fixes the problem: @example car([#]) @result{}# @end example Here are more examples: @example car(foo, bar) @result{}foo car([foo, bar]) @result{}foo, bar car((foo, bar)) @result{}(foo, bar) car([(foo], [bar)]) @result{}(foo define([a], [b]) @result{} car(a) @result{}b car([a]) @result{}b car([[a]]) @result{}a car([[[a]]]) @result{}[a] @end example @node Quoting and Parameters @subsection Quoting and Parameters When M4 encounters @samp{$} within a macro definition, followed immediately by a character it recognizes (@samp{0}@dots{}@samp{9}, @samp{#}, @samp{@@}, or @samp{*}), it will perform M4 parameter expansion. This happens regardless of how many layers of quotes the parameter expansion is nested within, or even if it occurs in text that will be rescanned as a comment. @example define([none], [$1]) @result{} define([one], [[$1]]) @result{} define([two], [[[$1]]]) @result{} define([comment], [# $1]) @result{} define([active], [ACTIVE]) @result{} none([active]) @result{}ACTIVE one([active]) @result{}active two([active]) @result{}[active] comment([active]) @result{}# active @end example On the other hand, since autoconf generates shell code, you often want to output shell variable expansion, rather than performing M4 parameter expansion. To do this, you must use M4 quoting to separate the @samp{$} from the next character in the definition of your macro. If the macro definition occurs in single-quoted text, then insert another level of quoting; if the usage is already inside a double-quoted string, then split it into concatenated strings. @example define([foo], [a single-quoted $[]1 definition]) @result{} define([bar], [[a double-quoted $][1 definition]]) @result{} foo @result{}a single-quoted $1 definition bar @result{}a double-quoted $1 definition @end example Posix states that M4 implementations are free to provide implementation extensions when @samp{$@{} is encountered in a macro definition. Autoconf reserves the longer sequence @samp{$@{@{} for use with planned extensions that will be available in the future GNU M4 2.0, but guarantees that all other instances of @samp{$@{} will be output literally. Therefore, this idiom can also be used to output shell code parameter references: @example define([first], [$@{1@}])first @result{}$@{1@} @end example Posix also states that @samp{$11} should expand to the first parameter concatenated with a literal @samp{1}, although some versions of GNU M4 expand the eleventh parameter instead. For portability, you should only use single-digit M4 parameter expansion. With this in mind, we can explore the cases where macros invoke macros@enddots{} @node Quotation and Nested Macros @subsection Quotation and Nested Macros The examples below use the following macros: @example define([car], [$1]) define([active], [ACT, IVE]) define([array], [int tab[10]]) @end example Each additional embedded macro call introduces other possible interesting quotations: @example car(active) @result{}ACT car([active]) @result{}ACT, IVE car([[active]]) @result{}active @end example In the first case, the top level looks for the arguments of @code{car}, and finds @samp{active}. Because M4 evaluates its arguments before applying the macro, @samp{active} is expanded, which results in: @example car(ACT, IVE) @result{}ACT @end example @noindent In the second case, the top level gives @samp{active} as first and only argument of @code{car}, which results in: @example active @result{}ACT, IVE @end example @noindent i.e., the argument is evaluated @emph{after} the macro that invokes it. In the third case, @code{car} receives @samp{[active]}, which results in: @example [active] @result{}active @end example @noindent exactly as we already saw above. The example above, applied to a more realistic example, gives: @example car(int tab[10];) @result{}int tab10; car([int tab[10];]) @result{}int tab10; car([[int tab[10];]]) @result{}int tab[10]; @end example @noindent Huh? The first case is easily understood, but why is the second wrong, and the third right? To understand that, you must know that after M4 expands a macro, the resulting text is immediately subjected to macro expansion and quote removal. This means that the quote removal occurs twice---first before the argument is passed to the @code{car} macro, and second after the @code{car} macro expands to the first argument. As the author of the Autoconf macro @code{car}, you then consider it to be incorrect that your users have to double-quote the arguments of @code{car}, so you ``fix'' your macro. Let's call it @code{qar} for quoted car: @example define([qar], [[$1]]) @end example @noindent and check that @code{qar} is properly fixed: @example qar([int tab[10];]) @result{}int tab[10]; @end example @noindent Ahhh! That's much better. But note what you've done: now that the result of @code{qar} is always a literal string, the only time a user can use nested macros is if she relies on an @emph{unquoted} macro call: @example qar(active) @result{}ACT qar([active]) @result{}active @end example @noindent leaving no way for her to reproduce what she used to do with @code{car}: @example car([active]) @result{}ACT, IVE @end example @noindent Worse yet: she wants to use a macro that produces a set of @code{cpp} macros: @example define([my_includes], [#include ]) car([my_includes]) @result{}#include qar(my_includes) @error{}EOF in argument list @end example This macro, @code{qar}, because it double quotes its arguments, forces its users to leave their macro calls unquoted, which is dangerous. Commas and other active symbols are interpreted by M4 before they are given to the macro, often not in the way the users expect. Also, because @code{qar} behaves differently from the other macros, it's an exception that should be avoided in Autoconf. @node Changequote is Evil @subsection @code{changequote} is Evil @cindex @code{changequote} The temptation is often high to bypass proper quotation, in particular when it's late at night. Then, many experienced Autoconf hackers finally surrender to the dark side of the force and use the ultimate weapon: @code{changequote}. The M4 builtin @code{changequote} belongs to a set of primitives that allow one to adjust the syntax of the language to adjust it to one's needs. For instance, by default M4 uses @samp{`} and @samp{'} as quotes, but in the context of shell programming (and actually of most programming languages), that's about the worst choice one can make: because of strings and back-quoted expressions in shell code (such as @samp{'this'} and @samp{`that`}), and because of literal characters in usual programming languages (as in @samp{'0'}), there are many unbalanced @samp{`} and @samp{'}. Proper M4 quotation then becomes a nightmare, if not impossible. In order to make M4 useful in such a context, its designers have equipped it with @code{changequote}, which makes it possible to choose another pair of quotes. M4sugar, M4sh, Autoconf, and Autotest all have chosen to use @samp{[} and @samp{]}. Not especially because they are unlikely characters, but @emph{because they are characters unlikely to be unbalanced}. There are other magic primitives, such as @code{changecom} to specify what syntactic forms are comments (it is common to see @samp{changecom()} when M4 is used to produce HTML pages), @code{changeword} and @code{changesyntax} to change other syntactic details (such as the character to denote the @var{n}th argument, @samp{$} by default, the parentheses around arguments, etc.). These primitives are really meant to make M4 more useful for specific domains: they should be considered like command line options: @option{--quotes}, @option{--comments}, @option{--words}, and @option{--syntax}. Nevertheless, they are implemented as M4 builtins, as it makes M4 libraries self contained (no need for additional options). There lies the problem@enddots{} @sp 1 The problem is that it is then tempting to use them in the middle of an M4 script, as opposed to its initialization. This, if not carefully thought out, can lead to disastrous effects: @emph{you are changing the language in the middle of the execution}. Changing and restoring the syntax is often not enough: if you happened to invoke macros in between, these macros are lost, as the current syntax is probably not the one they were implemented with. @c FIXME: I've been looking for a short, real case example, but I @c lost them all :( @node Quadrigraphs @subsection Quadrigraphs @cindex quadrigraphs @cindex @samp{@@S|@@} @cindex @samp{@@&t@@} @c Info cannot handle ':' in index entries. @ifnotinfo @cindex @samp{@@<:@@} @cindex @samp{@@:>@@} @cindex @samp{@@%:@@} @cindex @samp{@@@{:@@} @cindex @samp{@@:@}@@} @end ifnotinfo When writing an Autoconf macro you may occasionally need to generate special characters that are difficult to express with the standard Autoconf quoting rules. For example, you may need to output the regular expression @samp{[^[]}, which matches any character other than @samp{[}. This expression contains unbalanced brackets so it cannot be put easily into an M4 macro. Additionally, there are a few m4sugar macros (such as @code{m4_split} and @code{m4_expand}) which internally use special markers in addition to the regular quoting characters. If the arguments to these macros contain the literal strings @samp{-=<@{(} or @samp{)@}>=-}, the macros might behave incorrectly. You can work around these problems by using one of the following @dfn{quadrigraphs}: @table @samp @item @@<:@@ @samp{[} @item @@:>@@ @samp{]} @item @@S|@@ @samp{$} @item @@%:@@ @samp{#} @item @@@{:@@ @samp{(} @item @@:@}@@ @samp{)} @item @@&t@@ Expands to nothing. @end table Quadrigraphs are replaced at a late stage of the translation process, after @command{m4} is run, so they do not get in the way of M4 quoting. For example, the string @samp{^@@<:@@}, independently of its quotation, appears as @samp{^[} in the output. The empty quadrigraph can be used: @itemize @minus @item to mark trailing spaces explicitly Trailing spaces are smashed by @command{autom4te}. This is a feature. @item to produce quadrigraphs and other strings reserved by m4sugar For instance @samp{@@<@@&t@@:@@} produces @samp{@@<:@@}. For a more contrived example: @example m4_define([a], [A])m4_define([b], [B])m4_define([c], [C])dnl m4_split([a )@}>=- b -=<@{( c]) @result{}[a], [], [B], [], [c] m4_split([a )@}@@&t@@>=- b -=<@@&t@@@{( c]) @result{}[a], [)@}>=-], [b], [-=<@{(], [c] @end example @item to escape @emph{occurrences} of forbidden patterns For instance you might want to mention @code{AC_FOO} in a comment, while still being sure that @command{autom4te} still catches unexpanded @samp{AC_*}. Then write @samp{AC@@&t@@_FOO}. @end itemize The name @samp{@@&t@@} was suggested by Paul Eggert: @quotation I should give some credit to the @samp{@@&t@@} pun. The @samp{&} is my own invention, but the @samp{t} came from the source code of the ALGOL68C compiler, written by Steve Bourne (of Bourne shell fame), and which used @samp{mt} to denote the empty string. In C, it would have looked like something like: @example char const mt[] = ""; @end example @noindent but of course the source code was written in Algol 68. I don't know where he got @samp{mt} from: it could have been his own invention, and I suppose it could have been a common pun around the Cambridge University computer lab at the time. @end quotation @node Balancing Parentheses @subsection Dealing with unbalanced parentheses @cindex balancing parentheses @cindex parentheses, balancing @cindex unbalanced parentheses, managing One of the pitfalls of portable shell programming is that if you intend your script to run with obsolescent shells, @command{case} statements require unbalanced parentheses. @xref{case, , Limitations of Shell Builtins}. With syntax highlighting editors, the presence of unbalanced @samp{)} can interfere with editors that perform syntax highlighting of macro contents based on finding the matching @samp{(}. Another concern is how much editing must be done when transferring code snippets between shell scripts and macro definitions. But most importantly, the presence of unbalanced parentheses can introduce expansion bugs. For an example, here is an underquoted attempt to use the macro @code{my_case}, which happens to expand to a portable @command{case} statement: @example AC_DEFUN([my_case], [case $file_name in *.c) echo "C source code";; esac]) AS_IF(:, my_case) @end example @noindent In the above example, the @code{AS_IF} call under-quotes its arguments. As a result, the unbalanced @samp{)} generated by the premature expansion of @code{my_case} results in expanding @code{AS_IF} with a truncated parameter, and the expansion is syntactically invalid: @example if :; then case $file_name in *.c fi echo "C source code";; esac) @end example If nothing else, this should emphasize the importance of the quoting arguments to macro calls. On the other hand, there are several variations for defining @code{my_case} to be more robust, even when used without proper quoting, each with some benefits and some drawbacks. @itemize @w{} @item Use left parenthesis before pattern @example AC_DEFUN([my_case], [case $file_name in (*.c) echo "C source code";; esac]) @end example @noindent This is simple and provides balanced parentheses. Although this is not portable to obsolescent shells (notably Solaris 10 @command{/bin/sh}), platforms with these shells invariably have a more-modern shell available somewhere so this approach typically suffices nowadays. @item Creative literal shell comment @example AC_DEFUN([my_case], [case $file_name in #( *.c) echo "C source code";; esac]) @end example @noindent This version provides balanced parentheses to several editors, and can be copied and pasted into a terminal as is. Unfortunately, it is still unbalanced as an Autoconf argument, since @samp{#(} is an M4 comment that masks the normal properties of @samp{(}. @item Quadrigraph shell comment @example AC_DEFUN([my_case], [case $file_name in @@%:@@( *.c) echo "C source code";; esac]) @end example @noindent This version provides balanced parentheses to even more editors, and can be used as a balanced Autoconf argument. Unfortunately, it requires some editing before it can be copied and pasted into a terminal, and the use of the quadrigraph @samp{@@%:@@} for @samp{#} reduces readability. @item Quoting just the parenthesis @example AC_DEFUN([my_case], [case $file_name in *.c[)] echo "C source code";; esac]) @end example @noindent This version quotes the @samp{)}, so that it can be used as a balanced Autoconf argument. As written, this is not balanced to an editor, but it can be coupled with @samp{[#(]} to meet that need, too. However, it still requires some edits before it can be copied and pasted into a terminal. @item Double-quoting the entire statement @example AC_DEFUN([my_case], [[case $file_name in #( *.c) echo "C source code";; esac]]) @end example @noindent Since the entire macro is double-quoted, there is no problem with using this as an Autoconf argument; and since the double-quoting is over the entire statement, this code can be easily copied and pasted into a terminal. However, the double quoting prevents the expansion of any macros inside the case statement, which may cause its own set of problems. @item Using @code{AS_CASE} @example AC_DEFUN([my_case], [AS_CASE([$file_name], [*.c], [echo "C source code"])]) @end example @noindent This version avoids the balancing issue altogether, by relying on @code{AS_CASE} (@pxref{Common Shell Constructs}); it also allows for the expansion of @code{AC_REQUIRE} to occur prior to the entire case statement, rather than within a branch of the case statement that might not be taken. However, the abstraction comes with a penalty that it is no longer a quick copy, paste, and edit to get back to shell code. @end itemize @node Quotation Rule Of Thumb @subsection Quotation Rule Of Thumb To conclude, the quotation rule of thumb is: @center @emph{One pair of quotes per pair of parentheses.} Never over-quote, never under-quote, in particular in the definition of macros. In the few places where the macros need to use brackets (usually in C program text or regular expressions), properly quote @emph{the arguments}! It is common to read Autoconf programs with snippets like: @example AC_TRY_LINK( changequote(<<, >>)dnl <<#include #ifndef tzname /* For SGI. */ extern char *tzname[]; /* RS6000 and others reject char **tzname. */ #endif>>, changequote([, ])dnl [atoi (*tzname);], ac_cv_var_tzname=yes, ac_cv_var_tzname=no) @end example @noindent which is incredibly useless since @code{AC_TRY_LINK} is @emph{already} double quoting, so you just need: @example AC_TRY_LINK( [#include #ifndef tzname /* For SGI. */ extern char *tzname[]; /* RS6000 and others reject char **tzname. */ #endif], [atoi (*tzname);], [ac_cv_var_tzname=yes], [ac_cv_var_tzname=no]) @end example @noindent The M4-fluent reader might note that these two examples are rigorously equivalent, since M4 swallows both the @samp{changequote(<<, >>)} and @samp{<<} @samp{>>} when it @dfn{collects} the arguments: these quotes are not part of the arguments! Simplified, the example above is just doing this: @example changequote(<<, >>)dnl <<[]>> changequote([, ])dnl @end example @noindent instead of simply: @example [[]] @end example With macros that do not double quote their arguments (which is the rule), double-quote the (risky) literals: @example AC_LINK_IFELSE([AC_LANG_PROGRAM( [[#include #ifndef tzname /* For SGI. */ extern char *tzname[]; /* RS6000 and others reject char **tzname. */ #endif]], [atoi (*tzname);])], [ac_cv_var_tzname=yes], [ac_cv_var_tzname=no]) @end example Please note that the macro @code{AC_TRY_LINK} is obsolete, so you really should be using @code{AC_LINK_IFELSE} instead. @xref{Quadrigraphs}, for what to do if you run into a hopeless case where quoting does not suffice. When you create a @command{configure} script using newly written macros, examine it carefully to check whether you need to add more quotes in your macros. If one or more words have disappeared in the M4 output, you need more quotes. When in doubt, quote. However, it's also possible to put on too many layers of quotes. If this happens, the resulting @command{configure} script may contain unexpanded macros. The @command{autoconf} program checks for this problem by looking for the string @samp{AC_} in @file{configure}. However, this heuristic does not work in general: for example, it does not catch overquoting in @code{AC_DEFINE} descriptions. @c ---------------------------------------- Using autom4te @node Using autom4te @section Using @command{autom4te} The Autoconf suite, including M4sugar, M4sh, and Autotest, in addition to Autoconf per se, heavily rely on M4. All these different uses revealed common needs factored into a layer over M4: @command{autom4te}@footnote{ @c Yet another great name from Lars J. Aas. @c }. @command{autom4te} is a preprocessor that is like @command{m4}. It supports M4 extensions designed for use in tools like Autoconf. @menu * autom4te Invocation:: A GNU M4 wrapper * Customizing autom4te:: Customizing the Autoconf package @end menu @node autom4te Invocation @subsection Invoking @command{autom4te} The command line arguments are modeled after M4's: @example autom4te @var{options} @var{files} @end example @noindent @evindex M4 where the @var{files} are directly passed to @command{m4}. By default, GNU M4 is found during configuration, but the environment variable @env{M4} can be set to tell @command{autom4te} where to look. In addition to the regular expansion, it handles the replacement of the quadrigraphs (@pxref{Quadrigraphs}), and of @samp{__oline__}, the current line in the output. It supports an extended syntax for the @var{files}: @table @file @item @var{file}.m4f This file is an M4 frozen file. Note that @emph{all the previous files are ignored}. See the @option{--melt} option for the rationale. @item @var{file}? If found in the library path, the @var{file} is included for expansion, otherwise it is ignored instead of triggering a failure. @end table @sp 1 Of course, it supports the Autoconf common subset of options: @table @option @item --help @itemx -h Print a summary of the command line options and exit. @item --version @itemx -V Print the version number of Autoconf and exit. @item --verbose @itemx -v Report processing steps. @item --debug @itemx -d Don't remove the temporary files and be even more verbose. @item --include=@var{dir} @itemx -I @var{dir} Also look for input files in @var{dir}. Multiple invocations accumulate. @item --output=@var{file} @itemx -o @var{file} Save output (script or trace) to @var{file}. The file @option{-} stands for the standard output. @end table @sp 1 As an extension of @command{m4}, it includes the following options: @table @option @item --warnings=@var{category}[,@var{category}...] @itemx -W@var{category}[,@var{category}...] @evindex WARNINGS Enable or disable warnings related to each @var{category}. @xref{m4_warn}, for a comprehensive list of categories. Special values include: @table @samp @item all Enable all categories of warnings. @item none Disable all categories of warnings. @item error Treat all warnings as errors. @item no-@var{category} Disable warnings falling into @var{category}. @end table The enviroment variable @env{WARNINGS} may also be set to a comma-separated list of warning categories to enable or disable. It is interpreted exactly the same way as the argument of @option{--warnings}, but unknown categories are silently ignored. The command line takes precedence; for instance, if @env{WARNINGS} is set to @code{obsolete}, but @option{-Wnone} is given on the command line, no warnings will be issued. Some categories of warnings are on by default. Again, for details see @ref{m4_warn}. @item --melt @itemx -M Do not use frozen files. Any argument @code{@var{file}.m4f} is replaced by @code{@var{file}.m4}. This helps tracing the macros which are executed only when the files are frozen, typically @code{m4_define}. For instance, running: @example autom4te --melt 1.m4 2.m4f 3.m4 4.m4f input.m4 @end example @noindent is roughly equivalent to running: @example m4 1.m4 2.m4 3.m4 4.m4 input.m4 @end example @noindent while @example autom4te 1.m4 2.m4f 3.m4 4.m4f input.m4 @end example @noindent is equivalent to: @example m4 --reload-state=4.m4f input.m4 @end example @item --freeze @itemx -F Produce a frozen state file. @command{autom4te} freezing is stricter than M4's: it must produce no warnings, and no output other than empty lines (a line with white space is @emph{not} empty) and comments (starting with @samp{#}). Unlike @command{m4}'s similarly-named option, this option takes no argument: @example autom4te 1.m4 2.m4 3.m4 --freeze --output=3.m4f @end example @noindent corresponds to @example m4 1.m4 2.m4 3.m4 --freeze-state=3.m4f @end example @item --mode=@var{octal-mode} @itemx -m @var{octal-mode} Set the mode of the non-traces output to @var{octal-mode}; by default @samp{0666}. @end table @sp 1 @cindex @file{autom4te.cache} As another additional feature over @command{m4}, @command{autom4te} caches its results. GNU M4 is able to produce a regular output and traces at the same time. Traces are heavily used in the GNU Build System: @command{autoheader} uses them to build @file{config.h.in}, @command{autoreconf} to determine what GNU Build System components are used, @command{automake} to ``parse'' @file{configure.ac} etc. To avoid recomputation, traces are cached while performing regular expansion, and conversely. This cache is (actually, the caches are) stored in the directory @file{autom4te.cache}. @emph{It can safely be removed} at any moment (especially if for some reason @command{autom4te} considers it trashed). @table @option @item --cache=@var{directory} @itemx -C @var{directory} Specify the name of the directory where the result should be cached. Passing an empty value disables caching. Be sure to pass a relative file name, as for the time being, global caches are not supported. @item --no-cache Don't cache the results. @item --force @itemx -f If a cache is used, consider it obsolete (but update it anyway). @end table @sp 1 Because traces are so important to the GNU Build System, @command{autom4te} provides high level tracing features as compared to M4, and helps exploiting the cache: @table @option @item --trace=@var{macro}[:@var{format}] @itemx -t @var{macro}[:@var{format}] Trace the invocations of @var{macro} according to the @var{format}. Multiple @option{--trace} arguments can be used to list several macros. Multiple @option{--trace} arguments for a single macro are not cumulative; instead, you should just make @var{format} as long as needed. The @var{format} is a regular string, with newlines if desired, and several special escape codes. It defaults to @samp{$f:$l:$n:$%}. It can use the following special escapes: @table @samp @item $$ @c $$ restore font-lock The character @samp{$}. @item $f The file name from which @var{macro} is called. @item $l The line number from which @var{macro} is called. @item $d The depth of the @var{macro} call. This is an M4 technical detail that you probably don't want to know about. @item $n The name of the @var{macro}. @item $@var{num} The @var{num}th argument of the call to @var{macro}. @item $@@ @itemx $@var{sep}@@ @itemx $@{@var{separator}@}@@ All the arguments passed to @var{macro}, separated by the character @var{sep} or the string @var{separator} (@samp{,} by default). Each argument is quoted, i.e., enclosed in a pair of square brackets. @item $* @itemx $@var{sep}* @itemx $@{@var{separator}@}* As above, but the arguments are not quoted. @item $% @itemx $@var{sep}% @itemx $@{@var{separator}@}% As above, but the arguments are not quoted, all new line characters in the arguments are smashed, and the default separator is @samp{:}. The escape @samp{$%} produces single-line trace outputs (unless you put newlines in the @samp{separator}), while @samp{$@@} and @samp{$*} do not. @end table @xref{autoconf Invocation}, for examples of trace uses. @item --preselect=@var{macro} @itemx -p @var{macro} Cache the traces of @var{macro}, but do not enable traces. This is especially important to save CPU cycles in the future. For instance, when invoked, @command{autoconf} pre-selects all the macros that @command{autoheader}, @command{automake}, @command{autoreconf}, etc., trace, so that running @command{m4} is not needed to trace them: the cache suffices. This results in a huge speed-up. @end table @sp 1 @cindex Autom4te Library Finally, @command{autom4te} introduces the concept of @dfn{Autom4te libraries}. They consists in a powerful yet extremely simple feature: sets of combined command line arguments: @table @option @item --language=@var{language} @itemx -l @var{language} Use the @var{language} Autom4te library. Current languages include: @table @code @item M4sugar create M4sugar output. @item M4sh create M4sh executable shell scripts. @item Autotest create Autotest executable test suites. @item Autoconf-without-aclocal-m4 create Autoconf executable configure scripts without reading @file{aclocal.m4}. @item Autoconf create Autoconf executable configure scripts. This language inherits all the characteristics of @code{Autoconf-without-aclocal-m4} and additionally reads @file{aclocal.m4}. @end table @item --prepend-include=@var{dir} @itemx -B @var{dir} Prepend directory @var{dir} to the search path. This is used to include the language-specific files before any third-party macros. @end table @cindex @file{autom4te.cfg} As an example, if Autoconf is installed in its default location, @file{/usr/local}, the command @samp{autom4te -l m4sugar foo.m4} is strictly equivalent to the command: @example autom4te --prepend-include /usr/local/share/autoconf \ m4sugar/m4sugar.m4f foo.m4 @end example @noindent Recursive expansion applies here: the command @samp{autom4te -l m4sh foo.m4} is the same as @samp{autom4te --language M4sugar m4sugar/m4sh.m4f foo.m4}, i.e.: @example autom4te --prepend-include /usr/local/share/autoconf \ m4sugar/m4sugar.m4f m4sugar/m4sh.m4f --mode 777 foo.m4 @end example @noindent The definition of the languages is stored in @file{autom4te.cfg}. @node Customizing autom4te @subsection Customizing @command{autom4te} One can customize @command{autom4te} via @file{~/.autom4te.cfg} (i.e., as found in the user home directory), and @file{./.autom4te.cfg} (i.e., as found in the directory from which @command{autom4te} is run). The order is first reading @file{autom4te.cfg}, then @file{~/.autom4te.cfg}, then @file{./.autom4te.cfg}, and finally the command line arguments. In these text files, comments are introduced with @code{#}, and empty lines are ignored. Customization is performed on a per-language basis, wrapped in between a @samp{begin-language: "@var{language}"}, @samp{end-language: "@var{language}"} pair. Customizing a language stands for appending options (@pxref{autom4te Invocation}) to the current definition of the language. Options, and more generally arguments, are introduced by @samp{args: @var{arguments}}. You may use the traditional shell syntax to quote the @var{arguments}. As an example, to disable Autoconf caches (@file{autom4te.cache}) globally, include the following lines in @file{~/.autom4te.cfg}: @verbatim ## ------------------ ## ## User Preferences. ## ## ------------------ ## begin-language: "Autoconf-without-aclocal-m4" args: --no-cache end-language: "Autoconf-without-aclocal-m4" @end verbatim @node Programming in M4sugar @section Programming in M4sugar @cindex M4sugar M4 by itself provides only a small, but sufficient, set of all-purpose macros. M4sugar introduces additional generic macros. Its name was coined by Lars J. Aas: ``Readability And Greater Understanding Stands 4 M4sugar''. M4sugar reserves the macro namespace @samp{^_m4_} for internal use, and the macro namespace @samp{^m4_} for M4sugar macros. You should not define your own macros into these namespaces. @menu * Redefined M4 Macros:: M4 builtins changed in M4sugar * Diagnostic Macros:: Diagnostic messages from M4sugar * Diversion support:: Diversions in M4sugar * Conditional constructs:: Conditions in M4 * Looping constructs:: Iteration in M4 * Evaluation Macros:: More quotation and evaluation control * Text processing Macros:: String manipulation in M4 * Number processing Macros:: Arithmetic computation in M4 * Set manipulation Macros:: Set manipulation in M4 * Forbidden Patterns:: Catching unexpanded macros @end menu @node Redefined M4 Macros @subsection Redefined M4 Macros @msindex{builtin} @msindex{changecom} @msindex{changequote} @msindex{debugfile} @msindex{debugmode} @msindex{decr} @msindex{define} @msindex{divnum} @msindex{errprint} @msindex{esyscmd} @msindex{eval} @msindex{format} @msindex{ifdef} @msindex{incr} @msindex{index} @msindex{indir} @msindex{len} @msindex{pushdef} @msindex{shift} @msindex{substr} @msindex{syscmd} @msindex{sysval} @msindex{traceoff} @msindex{traceon} @msindex{translit} With a few exceptions, all the M4 native macros are moved in the @samp{m4_} pseudo-namespace, e.g., M4sugar renames @code{define} as @code{m4_define} etc. The list of macros unchanged from M4, except for their name, is: @itemize @minus @item m4_builtin @item m4_changecom @item m4_changequote @item m4_debugfile @item m4_debugmode @item m4_decr @item m4_define @item m4_divnum @item m4_errprint @item m4_esyscmd @item m4_eval @item m4_format @item m4_ifdef @item m4_incr @item m4_index @item m4_indir @item m4_len @item m4_pushdef @item m4_shift @item m4_substr @item m4_syscmd @item m4_sysval @item m4_traceoff @item m4_traceon @item m4_translit @end itemize Some M4 macros are redefined, and are slightly incompatible with their native equivalent. @defmac __file__ @defmacx __line__ @MSindex __file__ @MSindex __line__ All M4 macros starting with @samp{__} retain their original name: for example, no @code{m4__file__} is defined. @end defmac @defmac __oline__ @MSindex __oline__ This is not technically a macro, but a feature of Autom4te. The sequence @code{__oline__} can be used similarly to the other m4sugar location macros, but rather than expanding to the location of the input file, it is translated to the line number where it appears in the output file after all other M4 expansions. @end defmac @defmac dnl @MSindex dnl This macro kept its original name: no @code{m4_dnl} is defined. @end defmac @defmac m4_bpatsubst (@var{string}, @var{regexp}, @ovar{replacement}) @msindex{bpatsubst} This macro corresponds to @code{patsubst}. The name @code{m4_patsubst} is kept for future versions of M4sugar, once GNU M4 2.0 is released and supports extended regular expression syntax. @end defmac @defmac m4_bregexp (@var{string}, @var{regexp}, @ovar{replacement}) @msindex{bregexp} This macro corresponds to @code{regexp}. The name @code{m4_regexp} is kept for future versions of M4sugar, once GNU M4 2.0 is released and supports extended regular expression syntax. @end defmac @defmac m4_copy (@var{source}, @var{dest}) @defmacx m4_copy_force (@var{source}, @var{dest}) @defmacx m4_rename (@var{source}, @var{dest}) @defmacx m4_rename_force (@var{source}, @var{dest}) @msindex{copy} @msindex{copy_force} @msindex{rename} @msindex{rename_force} These macros aren't directly builtins, but are closely related to @code{m4_pushdef} and @code{m4_defn}. @code{m4_copy} and @code{m4_rename} ensure that @var{dest} is undefined, while @code{m4_copy_force} and @code{m4_rename_force} overwrite any existing definition. All four macros then proceed to copy the entire pushdef stack of definitions of @var{source} over to @var{dest}. @code{m4_copy} and @code{m4_copy_force} preserve the source (including in the special case where @var{source} is undefined), while @code{m4_rename} and @code{m4_rename_force} undefine the original macro name (making it an error to rename an undefined @var{source}). Note that attempting to invoke a renamed macro might not work, since the macro may have a dependence on helper macros accessed via composition of @samp{$0} but that were not also renamed; likewise, other macros may have a hard-coded dependence on @var{source} and could break if @var{source} has been deleted. On the other hand, it is always safe to rename a macro to temporarily move it out of the way, then rename it back later to restore original semantics. @end defmac @defmac m4_defn (@var{macro}@dots{}) @msindex{defn} This macro fails if @var{macro} is not defined, even when using older versions of M4 that did not warn. See @code{m4_undefine}. Unfortunately, in order to support these older versions of M4, there are some situations involving unbalanced quotes where concatenating multiple macros together will work in newer M4 but not in m4sugar; use quadrigraphs to work around this. @end defmac @defmac m4_divert (@var{diversion}) @msindex{divert} M4sugar relies heavily on diversions, so rather than behaving as a primitive, @code{m4_divert} behaves like: @example m4_divert_pop()m4_divert_push([@var{diversion}]) @end example @noindent @xref{Diversion support}, for more details about the use of the diversion stack. In particular, this implies that @var{diversion} should be a named diversion rather than a raw number. But be aware that it is seldom necessary to explicitly change the diversion stack, and that when done incorrectly, it can lead to syntactically invalid scripts. @end defmac @defmac m4_dumpdef (@var{name}@dots{}) @defmacx m4_dumpdefs (@var{name}@dots{}) @msindex{dumpdef} @msindex{dumpdefs} @code{m4_dumpdef} is like the M4 builtin, except that this version requires at least one argument, output always goes to standard error rather than the current debug file, no sorting is done on multiple arguments, and an error is issued if any @var{name} is undefined. @code{m4_dumpdefs} is a convenience macro that calls @code{m4_dumpdef} for all of the @code{m4_pushdef} stack of definitions, starting with the current, and silently does nothing if @var{name} is undefined. Unfortunately, due to a limitation in M4 1.4.x, any macro defined as a builtin is output as the empty string. This behavior is rectified by using M4 1.6 or newer. However, this behavior difference means that @code{m4_dumpdef} should only be used while developing m4sugar macros, and never in the final published form of a macro. @end defmac @defmac m4_esyscmd_s (@var{command}) @msindex{esyscmd_s} Like @code{m4_esyscmd}, this macro expands to the result of running @var{command} in a shell. The difference is that any trailing newlines are removed, so that the output behaves more like shell command substitution. @end defmac @defmac m4_exit (@var{exit-status}) @msindex{exit} This macro corresponds to @code{m4exit}. @end defmac @defmac m4_if (@var{comment}) @defmacx m4_if (@var{string-1}, @var{string-2}, @var{equal}, @ovar{not-equal}) @defmacx m4_if (@var{string-1}, @var{string-2}, @var{equal-1}, @ @var{string-3}, @var{string-4}, @var{equal-2}, @dots{}, @ovar{not-equal}) @msindex{if} This macro corresponds to @code{ifelse}. @var{string-1} and @var{string-2} are compared literally, so usually one of the two arguments is passed unquoted. @xref{Conditional constructs}, for more conditional idioms. @end defmac @defmac m4_include (@var{file}) @defmacx m4_sinclude (@var{file}) @msindex{include} @msindex{sinclude} Like the M4 builtins, but warn against multiple inclusions of @var{file}. @end defmac @defmac m4_mkstemp (@var{template}) @defmacx m4_maketemp (@var{template}) @msindex{maketemp} @msindex{mkstemp} Posix requires @code{maketemp} to replace the trailing @samp{X} characters in @var{template} with the process id, without regards to the existence of a file by that name, but this a security hole. When this was pointed out to the Posix folks, they agreed to invent a new macro @code{mkstemp} that always creates a uniquely named file, but not all versions of GNU M4 support the new macro. In M4sugar, @code{m4_maketemp} and @code{m4_mkstemp} are synonyms for each other, and both have the secure semantics regardless of which macro the underlying M4 provides. @end defmac @defmac m4_popdef (@var{macro}@dots{}) @msindex{popdef} This macro fails if @var{macro} is not defined, even when using older versions of M4 that did not warn. See @code{m4_undefine}. @end defmac @defmac m4_undefine (@var{macro}@dots{}) @msindex{undefine} This macro fails if @var{macro} is not defined, even when using older versions of M4 that did not warn. Use @example m4_ifdef([@var{macro}], [m4_undefine([@var{macro}])]) @end example @noindent if you are not sure whether @var{macro} is defined. @end defmac @defmac m4_undivert (@var{diversion}@dots{}) @msindex{undivert} Unlike the M4 builtin, at least one @var{diversion} must be specified. Also, since the M4sugar diversion stack prefers named diversions, the use of @code{m4_undivert} to include files is risky. @xref{Diversion support}, for more details about the use of the diversion stack. But be aware that it is seldom necessary to explicitly change the diversion stack, and that when done incorrectly, it can lead to syntactically invalid scripts. @end defmac @defmac m4_wrap (@var{text}) @defmacx m4_wrap_lifo (@var{text}) @msindex{wrap} @msindex{wrap_lifo} These macros correspond to @code{m4wrap}. Posix requires arguments of multiple wrap calls to be reprocessed at EOF in the same order as the original calls (first-in, first-out). GNU M4 versions through 1.4.10, however, reprocess them in reverse order (last-in, first-out). Both orders are useful, therefore, you can rely on @code{m4_wrap} to provide FIFO semantics and @code{m4_wrap_lifo} for LIFO semantics, regardless of the underlying GNU M4 version. Unlike the GNU M4 builtin, these macros only recognize one argument, and avoid token pasting between consecutive invocations. On the other hand, nested calls to @code{m4_wrap} from within wrapped text work just as in the builtin. @end defmac @node Diagnostic Macros @subsection Diagnostic messages from M4sugar @cindex Messages, from @command{M4sugar} When macros statically diagnose abnormal situations, benign or fatal, they should report them using these macros. For issuing dynamic issues, i.e., when @command{configure} is run, see @ref{Printing Messages}. @defmac m4_assert (@var{expression}, @dvar{exit-status, 1}) @msindex{assert} Assert that the arithmetic @var{expression} evaluates to non-zero. Otherwise, issue a fatal error, and exit @command{autom4te} with @var{exit-status}. @end defmac @defmac m4_errprintn (@var{message}) @msindex{errprintn} Similar to the builtin @code{m4_errprint}, except that a newline is guaranteed after @var{message}. @end defmac @anchor{m4_fatal} @defmac m4_fatal (@var{message}) @msindex{fatal} Report a severe error @var{message} prefixed with the current location, and have @command{autom4te} die. @end defmac @defmac m4_location @msindex{location} Useful as a prefix in a message line. Short for: @example __file__:__line__ @end example @end defmac @anchor{m4_warn} @defmac m4_warn (@var{category}, @var{message}) @msindex{warn} Report @var{message} as a warning (or as an error if requested by the user) if warnings of the @var{category} are turned on. If the message is emitted, it is prefixed with the current location, and followed by a call trace of all macros defined via @code{AC_DEFUN} used to get to the current expansion. The @var{category} must be one of: @table @samp @item cross Warnings about constructs that may interfere with cross-compilation, such as using @code{AC_RUN_IFELSE} without a default. @item gnu Warnings related to the GNU Coding Standards (@pxref{Top,,, standards, The GNU Coding Standards}). On by default. @item obsolete Warnings about obsolete features. On by default. @item override Warnings about redefinitions of Autoconf internals. @item portability Warnings about non-portable constructs. @item portability-recursive Warnings about recursive Make variable expansions (@code{$(foo$(x))}). @item extra-portability Extra warnings about non-portable constructs, covering rarely-used tools. @item syntax Warnings about questionable syntactic constructs, incorrectly ordered macro calls, typos, etc. On by default. @item unsupported Warnings about unsupported features. On by default. @end table @strong{Hacking Note:} The set of categories is defined by code in @command{autom4te}, not by M4sugar itself. Additions should be coordinated with Automake, so that both sets of tools accept the same options. @end defmac @node Diversion support @subsection Diversion support M4sugar makes heavy use of diversions under the hood, because it is often the case that text that must appear early in the output is not discovered until late in the input. Additionally, some of the topological sorting algorithms used in resolving macro dependencies use diversions. However, most macros should not need to change diversions directly, but rather rely on higher-level M4sugar macros to manage diversions transparently. If you change diversions improperly, you risk generating a syntactically invalid script, because an incorrect diversion will violate assumptions made by many macros about whether prerequisite text has been previously output. In short, if you manually change the diversion, you should not expect any macros provided by the Autoconf package to work until you have restored the diversion stack back to its original state. In the rare case that it is necessary to write a macro that explicitly outputs text to a different diversion, it is important to be aware of an M4 limitation regarding diversions: text only goes to a diversion if it is not part of argument collection. Therefore, any macro that changes the current diversion cannot be used as an unquoted argument to another macro, but must be expanded at the top level. The macro @code{m4_expand} will diagnose any attempt to change diversions, since it is generally useful only as an argument to another macro. The following example shows what happens when diversion manipulation is attempted within macro arguments: @example m4_do([normal text] m4_divert_push([KILL])unwanted[]m4_divert_pop([KILL]) [m4_divert_push([KILL])discarded[]m4_divert_pop([KILL])])dnl @result{}normal text @result{}unwanted @end example @noindent Notice that the unquoted text @code{unwanted} is output, even though it was processed while the current diversion was @code{KILL}, because it was collected as part of the argument to @code{m4_do}. However, the text @code{discarded} disappeared as desired, because the diversion changes were single-quoted, and were not expanded until the top-level rescan of the output of @code{m4_do}. To make diversion management easier, M4sugar uses the concept of named diversions. Rather than using diversion numbers directly, it is nicer to associate a name with each diversion. The diversion number associated with a particular diversion name is an implementation detail, and a syntax warning is issued if a diversion number is used instead of a name. In general, you should not output text to a named diversion until after calling the appropriate initialization routine for your language (@code{m4_init}, @code{AS_INIT}, @code{AT_INIT}, @dots{}), although there are some exceptions documented below. M4sugar defines two named diversions. @table @code @item KILL Text written to this diversion is discarded. This is the default diversion once M4sugar is initialized. @item GROW This diversion is used behind the scenes by topological sorting macros, such as @code{AC_REQUIRE}. @end table M4sh adds several more named diversions. @table @code @item BINSH This diversion is reserved for the @samp{#!} interpreter line. @item HEADER-REVISION This diversion holds text from @code{AC_REVISION}. @item HEADER-COMMENT This diversion holds comments about the purpose of a file. @item HEADER-COPYRIGHT This diversion is managed by @code{AC_COPYRIGHT}. @item M4SH-SANITIZE This diversion contains M4sh sanitization code, used to ensure M4sh is executing in a reasonable shell environment. @item M4SH-INIT This diversion contains M4sh initialization code, initializing variables that are required by other M4sh macros. @item BODY This diversion contains the body of the shell code, and is the default diversion once M4sh is initialized. @end table Autotest inherits diversions from M4sh, and changes the default diversion from @code{BODY} back to @code{KILL}. It also adds several more named diversions, with the following subset designed for developer use. @table @code @item PREPARE_TESTS This diversion contains initialization sequences which are executed after @file{atconfig} and @file{atlocal}, and after all command line arguments have been parsed, but prior to running any tests. It can be used to set up state that is required across all tests. This diversion will work even before @code{AT_INIT}. @end table Autoconf inherits diversions from M4sh, and adds the following named diversions which developers can utilize. @table @code @item DEFAULTS This diversion contains shell variable assignments to set defaults that must be in place before arguments are parsed. This diversion is placed early enough in @file{configure} that it is unsafe to expand any autoconf macros into this diversion. @item HELP_ENABLE If @code{AC_PRESERVE_HELP_ORDER} was used, then text placed in this diversion will be included as part of a quoted here-doc providing all of the @option{--help} output of @file{configure} related to options created by @code{AC_ARG_WITH} and @code{AC_ARG_ENABLE}. @item INIT_PREPARE This diversion occurs after all command line options have been parsed, but prior to the main body of the @file{configure} script. This diversion is the last chance to insert shell code such as variable assignments or shell function declarations that will used by the expansion of other macros. @end table For now, the remaining named diversions of Autoconf, Autoheader, and Autotest are not documented. In other words, intentionally outputting text into an undocumented diversion is subject to breakage in a future release of Autoconf. @defmac m4_cleardivert (@var{diversion}@dots{}) @msindex{cleardivert} Permanently discard any text that has been diverted into @var{diversion}. @end defmac @defmac m4_divert_once (@var{diversion}, @ovar{content}) @msindex{divert_once} Similar to @code{m4_divert_text}, except that @var{content} is only output to @var{diversion} if this is the first time that @code{m4_divert_once} has been called with its particular arguments. @end defmac @defmac m4_divert_pop (@ovar{diversion}) @msindex{divert_pop} If provided, check that the current diversion is indeed @var{diversion}. Then change to the diversion located earlier on the stack, giving an error if an attempt is made to pop beyond the initial m4sugar diversion of @code{KILL}. @end defmac @defmac m4_divert_push (@var{diversion}) @msindex{divert_push} Remember the former diversion on the diversion stack, and output subsequent text into @var{diversion}. M4sugar maintains a diversion stack, and issues an error if there is not a matching pop for every push. @end defmac @anchor{m4_divert_text} @defmac m4_divert_text (@var{diversion}, @ovar{content}) @msindex{divert_text} Output @var{content} and a newline into @var{diversion}, without affecting the current diversion. Shorthand for: @example m4_divert_push([@var{diversion}])@var{content} m4_divert_pop([@var{diversion}])dnl @end example One use of @code{m4_divert_text} is to develop two related macros, where macro @samp{MY_A} does the work, but adjusts what work is performed based on whether the optional macro @samp{MY_B} has also been expanded. Of course, it is possible to use @code{AC_BEFORE} within @code{MY_A} to require that @samp{MY_B} occurs first, if it occurs at all. But this imposes an ordering restriction on the user; it would be nicer if macros @samp{MY_A} and @samp{MY_B} can be invoked in either order. The trick is to let @samp{MY_B} leave a breadcrumb in an early diversion, which @samp{MY_A} can then use to determine whether @samp{MY_B} has been expanded. @example AC_DEFUN([MY_A], [# various actions if test -n "$b_was_used"; then # extra action fi]) AC_DEFUN([MY_B], [AC_REQUIRE([MY_A])dnl m4_divert_text([INIT_PREPARE], [b_was_used=true])]) @end example @end defmac @defmac m4_init @msindex{init} Initialize the M4sugar environment, setting up the default named diversion to be @code{KILL}. @end defmac @node Conditional constructs @subsection Conditional constructs The following macros provide additional conditional constructs as convenience wrappers around @code{m4_if}. @defmac m4_bmatch (@var{string}, @var{regex-1}, @var{value-1}, @ @ovar{regex-2}, @ovar{value-2}, @dots{}, @ovar{default}) @msindex{bmatch} The string @var{string} is repeatedly compared against a series of @var{regex} arguments; if a match is found, the expansion is the corresponding @var{value}, otherwise, the macro moves on to the next @var{regex}. If no @var{regex} match, then the result is the optional @var{default}, or nothing. @end defmac @defmac m4_bpatsubsts (@var{string}, @var{regex-1}, @var{subst-1}, @ @ovar{regex-2}, @ovar{subst-2}, @dots{}) @msindex{bpatsubsts} The string @var{string} is altered by @var{regex-1} and @var{subst-1}, as if by: @example m4_bpatsubst([[@var{string}]], [@var{regex}], [@var{subst}]) @end example @noindent The result of the substitution is then passed through the next set of @var{regex} and @var{subst}, and so forth. An empty @var{subst} implies deletion of any matched portions in the current string. Note that this macro over-quotes @var{string}; this behavior is intentional, so that the result of each step of the recursion remains as a quoted string. However, it means that anchors (@samp{^} and @samp{$} in the @var{regex} will line up with the extra quotations, and not the characters of the original string. The overquoting is removed after the final substitution. @end defmac @defmac m4_case (@var{string}, @var{value-1}, @var{if-value-1}, @ @ovar{value-2}, @ovar{if-value-2}, @dots{}, @ovar{default}) @msindex{case} Test @var{string} against multiple @var{value} possibilities, resulting in the first @var{if-value} for a match, or in the optional @var{default}. This is shorthand for: @example m4_if([@var{string}], [@var{value-1}], [@var{if-value-1}], [@var{string}], [@var{value-2}], [@var{if-value-2}], @dots{}, [@var{default}]) @end example @end defmac @defmac m4_cond (@var{test-1}, @var{value-1}, @var{if-value-1}, @ @ovar{test-2}, @ovar{value-2}, @ovar{if-value-2}, @dots{}, @ovar{default}) @msindex{cond} This macro was introduced in Autoconf 2.62. Similar to @code{m4_if}, except that each @var{test} is expanded only when it is encountered. This is useful for short-circuiting expensive tests; while @code{m4_if} requires all its strings to be expanded up front before doing comparisons, @code{m4_cond} only expands a @var{test} when all earlier tests have failed. For an example, these two sequences give the same result, but in the case where @samp{$1} does not contain a backslash, the @code{m4_cond} version only expands @code{m4_index} once, instead of five times, for faster computation if this is a common case for @samp{$1}. Notice that every third argument is unquoted for @code{m4_if}, and quoted for @code{m4_cond}: @example m4_if(m4_index([$1], [\]), [-1], [$2], m4_eval(m4_index([$1], [\\]) >= 0), [1], [$2], m4_eval(m4_index([$1], [\$]) >= 0), [1], [$2], m4_eval(m4_index([$1], [\`]) >= 0), [1], [$3], m4_eval(m4_index([$1], [\"]) >= 0), [1], [$3], [$2]) m4_cond([m4_index([$1], [\])], [-1], [$2], [m4_eval(m4_index([$1], [\\]) >= 0)], [1], [$2], [m4_eval(m4_index([$1], [\$]) >= 0)], [1], [$2], [m4_eval(m4_index([$1], [\`]) >= 0)], [1], [$3], [m4_eval(m4_index([$1], [\"]) >= 0)], [1], [$3], [$2]) @end example @end defmac @defmac m4_default (@var{expr-1}, @var{expr-2}) @defmacx m4_default_quoted (@var{expr-1}, @var{expr-2}) @defmacx m4_default_nblank (@var{expr-1}, @ovar{expr-2}) @defmacx m4_default_nblank_quoted (@var{expr-1}, @ovar{expr-2}) @msindex{default} @msindex{default_quoted} @msindex{default_nblank} @msindex{default_nblank_quoted} If @var{expr-1} contains text, use it. Otherwise, select @var{expr-2}. @code{m4_default} expands the result, while @code{m4_default_quoted} does not. Useful for providing a fixed default if the expression that results in @var{expr-1} would otherwise be empty. The difference between @code{m4_default} and @code{m4_default_nblank} is whether an argument consisting of just blanks (space, tab, newline) is significant. When using the expanding versions, note that an argument may contain text but still expand to an empty string. @example m4_define([active], [ACTIVE])dnl m4_define([empty], [])dnl m4_define([demo1], [m4_default([$1], [$2])])dnl m4_define([demo2], [m4_default_quoted([$1], [$2])])dnl m4_define([demo3], [m4_default_nblank([$1], [$2])])dnl m4_define([demo4], [m4_default_nblank_quoted([$1], [$2])])dnl demo1([active], [default]) @result{}ACTIVE demo1([], [active]) @result{}ACTIVE demo1([empty], [text]) @result{} -demo1([ ], [active])- @result{}- - demo2([active], [default]) @result{}active demo2([], [active]) @result{}active demo2([empty], [text]) @result{}empty -demo2([ ], [active])- @result{}- - demo3([active], [default]) @result{}ACTIVE demo3([], [active]) @result{}ACTIVE demo3([empty], [text]) @result{} -demo3([ ], [active])- @result{}-ACTIVE- demo4([active], [default]) @result{}active demo4([], [active]) @result{}active demo4([empty], [text]) @result{}empty -demo4([ ], [active])- @result{}-active- @end example @end defmac @defmac m4_define_default (@var{macro}, @ovar{default-definition}) @msindex{define_default} If @var{macro} does not already have a definition, then define it to @var{default-definition}. @end defmac @defmac m4_ifblank (@var{cond}, @ovar{if-blank}, @ovar{if-text}) @defmacx m4_ifnblank (@var{cond}, @ovar{if-text}, @ovar{if-blank}) @msindex{ifblank} @msindex{ifnblank} If @var{cond} is empty or consists only of blanks (space, tab, newline), then expand @var{if-blank}; otherwise, expand @var{if-text}. Two variants exist, in order to make it easier to select the correct logical sense when using only two parameters. Note that this is more efficient than the equivalent behavior of: @example m4_ifval(m4_normalize([@var{cond}]), @var{if-text}, @var{if-blank}) @end example @end defmac @defmac m4_ifndef (@var{macro}, @var{if-not-defined}, @ovar{if-defined}) @msindex{ifndef} This is shorthand for: @example m4_ifdef([@var{macro}], [@var{if-defined}], [@var{if-not-defined}]) @end example @end defmac @defmac m4_ifset (@var{macro}, @ovar{if-true}, @ovar{if-false}) @msindex{ifset} If @var{macro} is undefined, or is defined as the empty string, expand to @var{if-false}. Otherwise, expands to @var{if-true}. Similar to: @example m4_ifval(m4_defn([@var{macro}]), [@var{if-true}], [@var{if-false}]) @end example @noindent except that it is not an error if @var{macro} is undefined. @end defmac @defmac m4_ifval (@var{cond}, @ovar{if-true}, @ovar{if-false}) @msindex{ifval} Expands to @var{if-true} if @var{cond} is not empty, otherwise to @var{if-false}. This is shorthand for: @example m4_if([@var{cond}], [], [@var{if-false}], [@var{if-true}]) @end example @end defmac @defmac m4_ifvaln (@var{cond}, @ovar{if-true}, @ovar{if-false}) @msindex{ifvaln} Similar to @code{m4_ifval}, except guarantee that a newline is present after any non-empty expansion. Often followed by @code{dnl}. @end defmac @defmac m4_n (@var{text}) @msindex{n} Expand to @var{text}, and add a newline if @var{text} is not empty. Often followed by @code{dnl}. @end defmac @node Looping constructs @subsection Looping constructs The following macros are useful in implementing recursive algorithms in M4, including loop operations. An M4 list is formed by quoting a list of quoted elements; generally the lists are comma-separated, although @code{m4_foreach_w} is whitespace-separated. For example, the list @samp{[[a], [b,c]]} contains two elements: @samp{[a]} and @samp{[b,c]}. It is common to see lists with unquoted elements when those elements are not likely to be macro names, as in @samp{[fputc_unlocked, fgetc_unlocked]}. Although not generally recommended, it is possible for quoted lists to have side effects; all side effects are expanded only once, and prior to visiting any list element. On the other hand, the fact that unquoted macros are expanded exactly once means that macros without side effects can be used to generate lists. For example, @example m4_foreach([i], [[1], [2], [3]m4_errprintn([hi])], [i]) @error{}hi @result{}123 m4_define([list], [[1], [2], [3]]) @result{} m4_foreach([i], [list], [i]) @result{}123 @end example @defmac m4_argn (@var{n}, @ovar{arg}@dots{}) @msindex{argn} Extracts argument @var{n} (larger than 0) from the remaining arguments. If there are too few arguments, the empty string is used. For any @var{n} besides 1, this is more efficient than the similar @samp{m4_car(m4_shiftn([@var{n}], [], [@var{arg}@dots{}]))}. @end defmac @defmac m4_car (@var{arg}@dots{}) @msindex{car} Expands to the quoted first @var{arg}. Can be used with @code{m4_cdr} to recursively iterate through a list. Generally, when using quoted lists of quoted elements, @code{m4_car} should be called without any extra quotes. @end defmac @defmac m4_cdr (@var{arg}@dots{}) @msindex{cdr} Expands to a quoted list of all but the first @var{arg}, or the empty string if there was only one argument. Generally, when using quoted lists of quoted elements, @code{m4_cdr} should be called without any extra quotes. For example, this is a simple implementation of @code{m4_map}; note how each iteration checks for the end of recursion, then merely applies the first argument to the first element of the list, then repeats with the rest of the list. (The actual implementation in M4sugar is a bit more involved, to gain some speed and share code with @code{m4_map_sep}, and also to avoid expanding side effects in @samp{$2} twice). @example m4_define([m4_map], [m4_ifval([$2], [m4_apply([$1], m4_car($2))[]$0([$1], m4_cdr($2))])])dnl m4_map([ m4_eval], [[[1]], [[1+1]], [[10],[16]]]) @result{} 1 2 a @end example @end defmac @defmac m4_for (@var{var}, @var{first}, @var{last}, @ovar{step}, @ @var{expression}) @msindex{for} Loop over the numeric values between @var{first} and @var{last} including bounds by increments of @var{step}. For each iteration, expand @var{expression} with the numeric value assigned to @var{var}. If @var{step} is omitted, it defaults to @samp{1} or @samp{-1} depending on the order of the limits. If given, @var{step} has to match this order. The number of iterations is determined independently from definition of @var{var}; iteration cannot be short-circuited or lengthened by modifying @var{var} from within @var{expression}. @end defmac @defmac m4_foreach (@var{var}, @var{list}, @var{expression}) @msindex{foreach} Loop over the comma-separated M4 list @var{list}, assigning each value to @var{var}, and expand @var{expression}. The following example outputs two lines: @example m4_foreach([myvar], [[foo], [bar, baz]], [echo myvar ])dnl @result{}echo foo @result{}echo bar, baz @end example Note that for some forms of @var{expression}, it may be faster to use @code{m4_map_args}. @end defmac @anchor{m4_foreach_w} @defmac m4_foreach_w (@var{var}, @var{list}, @var{expression}) @msindex{foreach_w} Loop over the white-space-separated list @var{list}, assigning each value to @var{var}, and expand @var{expression}. If @var{var} is only referenced once in @var{expression}, it is more efficient to use @code{m4_map_args_w}. The deprecated macro @code{AC_FOREACH} is an alias of @code{m4_foreach_w}. @end defmac @defmac m4_map (@var{macro}, @var{list}) @defmacx m4_mapall (@var{macro}, @var{list}) @defmacx m4_map_sep (@var{macro}, @var{separator}, @var{list}) @defmacx m4_mapall_sep (@var{macro}, @var{separator}, @var{list}) @msindex{map} @msindex{mapall} @msindex{map_sep} @msindex{mapall_sep} Loop over the comma separated quoted list of argument descriptions in @var{list}, and invoke @var{macro} with the arguments. An argument description is in turn a comma-separated quoted list of quoted elements, suitable for @code{m4_apply}. The macros @code{m4_map} and @code{m4_map_sep} ignore empty argument descriptions, while @code{m4_mapall} and @code{m4_mapall_sep} invoke @var{macro} with no arguments. The macros @code{m4_map_sep} and @code{m4_mapall_sep} additionally expand @var{separator} between invocations of @var{macro}. Note that @var{separator} is expanded, unlike in @code{m4_join}. When separating output with commas, this means that the map result can be used as a series of arguments, by using a single-quoted comma as @var{separator}, or as a single string, by using a double-quoted comma. @example m4_map([m4_count], []) @result{} m4_map([ m4_count], [[], [[1]], [[1], [2]]]) @result{} 1 2 m4_mapall([ m4_count], [[], [[1]], [[1], [2]]]) @result{} 0 1 2 m4_map_sep([m4_eval], [,], [[[1+2]], [[10], [16]]]) @result{}3,a m4_map_sep([m4_echo], [,], [[[a]], [[b]]]) @result{}a,b m4_count(m4_map_sep([m4_echo], [,], [[[a]], [[b]]])) @result{}2 m4_map_sep([m4_echo], [[,]], [[[a]], [[b]]]) @result{}a,b m4_count(m4_map_sep([m4_echo], [[,]], [[[a]], [[b]]])) @result{}1 @end example @end defmac @defmac m4_map_args (@var{macro}, @var{arg}@dots{}) @msindex{map_args} Repeatedly invoke @var{macro} with each successive @var{arg} as its only argument. In the following example, three solutions are presented with the same expansion; the solution using @code{m4_map_args} is the most efficient. @example m4_define([active], [ACTIVE])dnl m4_foreach([var], [[plain], [active]], [ m4_echo(m4_defn([var]))]) @result{} plain active m4_map([ m4_echo], [[[plain]], [[active]]]) @result{} plain active m4_map_args([ m4_echo], [plain], [active]) @result{} plain active @end example In cases where it is useful to operate on additional parameters besides the list elements, the macro @code{m4_curry} can be used in @var{macro} to supply the argument currying necessary to generate the desired argument list. In the following example, @code{list_add_n} is more efficient than @code{list_add_x}. On the other hand, using @code{m4_map_args_sep} can be even more efficient. @example m4_define([list], [[1], [2], [3]])dnl m4_define([add], [m4_eval(([$1]) + ([$2]))])dnl dnl list_add_n(N, ARG...) dnl Output a list consisting of each ARG added to N m4_define([list_add_n], [m4_shift(m4_map_args([,m4_curry([add], [$1])], m4_shift($@@)))])dnl list_add_n([1], list) @result{}2,3,4 list_add_n([2], list) @result{}3,4,5 m4_define([list_add_x], [m4_shift(m4_foreach([var], m4_dquote(m4_shift($@@)), [,add([$1],m4_defn([var]))]))])dnl list_add_x([1], list) @result{}2,3,4 @end example @end defmac @defmac m4_map_args_pair (@var{macro}, @dvarv{macro-end, macro}, @ @var{arg}@dots{}) @msindex{map_args_pair} For every pair of arguments @var{arg}, invoke @var{macro} with two arguments. If there is an odd number of arguments, invoke @var{macro-end}, which defaults to @var{macro}, with the remaining argument. @example m4_map_args_pair([, m4_reverse], [], [1], [2], [3]) @result{}, 2, 1, 3 m4_map_args_pair([, m4_reverse], [, m4_dquote], [1], [2], [3]) @result{}, 2, 1, [3] m4_map_args_pair([, m4_reverse], [, m4_dquote], [1], [2], [3], [4]) @result{}, 2, 1, 4, 3 @end example @end defmac @defmac m4_map_args_sep (@ovar{pre}, @ovar{post}, @ovar{sep}, @var{arg}@dots{}) @msindex{map_args_sep} Expand the sequence @code{@var{pre}[@var{arg}]@var{post}} for each argument, additionally expanding @var{sep} between arguments. One common use of this macro is constructing a macro call, where the opening and closing parentheses are split between @var{pre} and @var{post}; in particular, @code{m4_map_args([@var{macro}], [@var{arg}])} is equivalent to @code{m4_map_args_sep([@var{macro}(], [)], [], [@var{arg}])}. This macro provides the most efficient means for iterating over an arbitrary list of arguments, particularly when repeatedly constructing a macro call with more arguments than @var{arg}. @end defmac @defmac m4_map_args_w (@var{string}, @ovar{pre}, @ovar{post}, @ovar{sep}) @msindex{map_args_w} Expand the sequence @code{@var{pre}[word]@var{post}} for each word in the whitespace-separated @var{string}, additionally expanding @var{sep} between words. This macro provides the most efficient means for iterating over a whitespace-separated string. In particular, @code{m4_map_args_w([@var{string}], [@var{action}(], [)])} is more efficient than @code{m4_foreach_w([var], [@var{string}], [@var{action}(m4_defn([var]))])}. @end defmac @defmac m4_shiftn (@var{count}, @dots{}) @defmacx m4_shift2 (@dots{}) @defmacx m4_shift3 (@dots{}) @msindex{shift2} @msindex{shift3} @msindex{shiftn} @code{m4_shiftn} performs @var{count} iterations of @code{m4_shift}, along with validation that enough arguments were passed in to match the shift count, and that the count is positive. @code{m4_shift2} and @code{m4_shift3} are specializations of @code{m4_shiftn}, introduced in Autoconf 2.62, and are more efficient for two and three shifts, respectively. @end defmac @defmac m4_stack_foreach (@var{macro}, @var{action}) @defmacx m4_stack_foreach_lifo (@var{macro}, @var{action}) @msindex{stack_foreach} @msindex{stack_foreach_lifo} For each of the @code{m4_pushdef} definitions of @var{macro}, expand @var{action} with the single argument of a definition of @var{macro}. @code{m4_stack_foreach} starts with the oldest definition, while @code{m4_stack_foreach_lifo} starts with the current definition. @var{action} should not push or pop definitions of @var{macro}, nor is there any guarantee that the current definition of @var{macro} matches the argument that was passed to @var{action}. The macro @code{m4_curry} can be used if @var{action} needs more than one argument, although in that case it is more efficient to use @var{m4_stack_foreach_sep}. Due to technical limitations, there are a few low-level m4sugar functions, such as @code{m4_pushdef}, that cannot be used as the @var{macro} argument. @example m4_pushdef([a], [1])m4_pushdef([a], [2])dnl m4_stack_foreach([a], [ m4_incr]) @result{} 2 3 m4_stack_foreach_lifo([a], [ m4_curry([m4_substr], [abcd])]) @result{} cd bcd @end example @end defmac @defmac m4_stack_foreach_sep (@var{macro}, @ovar{pre}, @ovar{post}, @ovar{sep}) @defmacx m4_stack_foreach_sep_lifo (@var{macro}, @ovar{pre}, @ovar{post}, @ @ovar{sep}) @msindex{stack_foreach_sep} @msindex{stack_foreach_sep_lifo} Expand the sequence @code{@var{pre}[definition]@var{post}} for each @code{m4_pushdef} definition of @var{macro}, additionally expanding @var{sep} between definitions. @code{m4_stack_foreach_sep} visits the oldest definition first, while @code{m4_stack_foreach_sep_lifo} visits the current definition first. This macro provides the most efficient means for iterating over a pushdef stack. In particular, @code{m4_stack_foreach([@var{macro}], [@var{action}])} is short for @code{m4_stack_foreach_sep([@var{macro}], [@var{action}(], [)])}. @end defmac @node Evaluation Macros @subsection Evaluation Macros The following macros give some control over the order of the evaluation by adding or removing levels of quotes. @defmac m4_apply (@var{macro}, @var{list}) @msindex{apply} Apply the elements of the quoted, comma-separated @var{list} as the arguments to @var{macro}. If @var{list} is empty, invoke @var{macro} without arguments. Note the difference between @code{m4_indir}, which expects its first argument to be a macro name but can use names that are otherwise invalid, and @code{m4_apply}, where @var{macro} can contain other text, but must end in a valid macro name. @example m4_apply([m4_count], []) @result{}0 m4_apply([m4_count], [[]]) @result{}1 m4_apply([m4_count], [[1], [2]]) @result{}2 m4_apply([m4_join], [[|], [1], [2]]) @result{}1|2 @end example @end defmac @defmac m4_count (@var{arg}, @dots{}) @msindex{count} This macro returns the decimal count of the number of arguments it was passed. @end defmac @defmac m4_curry (@var{macro}, @var{arg}@dots{}) @msindex{curry} This macro performs argument currying. The expansion of this macro is another macro name that expects exactly one argument; that argument is then appended to the @var{arg} list, and then @var{macro} is expanded with the resulting argument list. @example m4_curry([m4_curry], [m4_reverse], [1])([2])([3]) @result{}3, 2, 1 @end example Unfortunately, due to a limitation in M4 1.4.x, it is not possible to pass the definition of a builtin macro as the argument to the output of @code{m4_curry}; the empty string is used instead of the builtin token. This behavior is rectified by using M4 1.6 or newer. @end defmac @defmac m4_do (@var{arg}, @dots{}) @msindex{do} This macro loops over its arguments and expands each @var{arg} in sequence. Its main use is for readability; it allows the use of indentation and fewer @code{dnl} to result in the same expansion. This macro guarantees that no expansion will be concatenated with subsequent text; to achieve full concatenation, use @code{m4_unquote(m4_join([], @var{arg@dots{}}))}. @example m4_define([ab],[1])m4_define([bc],[2])m4_define([abc],[3])dnl m4_do([a],[b])c @result{}abc m4_unquote(m4_join([],[a],[b]))c @result{}3 m4_define([a],[A])m4_define([b],[B])m4_define([c],[C])dnl m4_define([AB],[4])m4_define([BC],[5])m4_define([ABC],[6])dnl m4_do([a],[b])c @result{}ABC m4_unquote(m4_join([],[a],[b]))c @result{}3 @end example @end defmac @defmac m4_dquote (@var{arg}, @dots{}) @msindex{dquote} Return the arguments as a quoted list of quoted arguments. Conveniently, if there is just one @var{arg}, this effectively adds a level of quoting. @end defmac @defmac m4_dquote_elt (@var{arg}, @dots{}) @msindex{dquote_elt} Return the arguments as a series of double-quoted arguments. Whereas @code{m4_dquote} returns a single argument, @code{m4_dquote_elt} returns as many arguments as it was passed. @end defmac @defmac m4_echo (@var{arg}, @dots{}) @msindex{echo} Return the arguments, with the same level of quoting. Other than discarding whitespace after unquoted commas, this macro is a no-op. @end defmac @defmac m4_expand (@var{arg}) @msindex{expand} Return the expansion of @var{arg} as a quoted string. Whereas @code{m4_quote} is designed to collect expanded text into a single argument, @code{m4_expand} is designed to perform one level of expansion on quoted text. One distinction is in the treatment of whitespace following a comma in the original @var{arg}. Any time multiple arguments are collected into one with @code{m4_quote}, the M4 argument collection rules discard the whitespace. However, with @code{m4_expand}, whitespace is preserved, even after the expansion of macros contained in @var{arg}. Additionally, @code{m4_expand} is able to expand text that would involve an unterminated comment, whereas expanding that same text as the argument to @code{m4_quote} runs into difficulty in finding the end of the argument. Since manipulating diversions during argument collection is inherently unsafe, @code{m4_expand} issues an error if @var{arg} attempts to change the current diversion (@pxref{Diversion support}). @example m4_define([active], [ACT, IVE])dnl m4_define([active2], [[ACT, IVE]])dnl m4_quote(active, active) @result{}ACT,IVE,ACT,IVE m4_expand([active, active]) @result{}ACT, IVE, ACT, IVE m4_quote(active2, active2) @result{}ACT, IVE,ACT, IVE m4_expand([active2, active2]) @result{}ACT, IVE, ACT, IVE m4_expand([# m4_echo]) @result{}# m4_echo m4_quote(# m4_echo) ) @result{}# m4_echo) @result{} @end example Note that @code{m4_expand} cannot handle an @var{arg} that expands to literal unbalanced quotes, but that quadrigraphs can be used when unbalanced output is necessary. Likewise, unbalanced parentheses should be supplied with double quoting or a quadrigraph. @example m4_define([pattern], [[!@@<:@@]])dnl m4_define([bar], [BAR])dnl m4_expand([case $foo in m4_defn([pattern])@@:@}@@ bar ;; *[)] blah ;; esac]) @result{}case $foo in @result{} [![]) BAR ;; @result{} *) blah ;; @result{}esac @end example @end defmac @defmac m4_ignore (@dots{}) @msindex{ignore} This macro was introduced in Autoconf 2.62. Expands to nothing, ignoring all of its arguments. By itself, this isn't very useful. However, it can be used to conditionally ignore an arbitrary number of arguments, by deciding which macro name to apply to a list of arguments. @example dnl foo outputs a message only if [debug] is defined. m4_define([foo], [m4_ifdef([debug],[AC_MSG_NOTICE],[m4_ignore])([debug message])]) @end example Note that for earlier versions of Autoconf, the macro @code{__gnu__} can serve the same purpose, although it is less readable. @end defmac @defmac m4_make_list (@var{arg}, @dots{}) @msindex{make_list} This macro exists to aid debugging of M4sugar algorithms. Its net effect is similar to @code{m4_dquote}---it produces a quoted list of quoted arguments, for each @var{arg}. The difference is that this version uses a comma-newline separator instead of just comma, to improve readability of the list; with the result that it is less efficient than @code{m4_dquote}. @example m4_define([zero],[0])m4_define([one],[1])m4_define([two],[2])dnl m4_dquote(zero, [one], [[two]]) @result{}[0],[one],[[two]] m4_make_list(zero, [one], [[two]]) @result{}[0], @result{}[one], @result{}[[two]] m4_foreach([number], m4_dquote(zero, [one], [[two]]), [ number]) @result{} 0 1 two m4_foreach([number], m4_make_list(zero, [one], [[two]]), [ number]) @result{} 0 1 two @end example @end defmac @c m4_noquote is too dangerous to document - it invokes macros that @c probably rely on @samp{[]} nested quoting for proper operation. The @c user should generally prefer m4_unquote instead. @defmac m4_quote (@var{arg}, @dots{}) @msindex{quote} Return the arguments as a single entity, i.e., wrap them into a pair of quotes. This effectively collapses multiple arguments into one, although it loses whitespace after unquoted commas in the process. @end defmac @defmac m4_reverse (@var{arg}, @dots{}) @msindex{reverse} Outputs each argument with the same level of quoting, but in reverse order, and with space following each comma for readability. @example m4_define([active], [ACT,IVE]) @result{} m4_reverse(active, [active]) @result{}active, IVE, ACT @end example @end defmac @defmac m4_unquote (@var{arg}, @dots{}) @msindex{unquote} This macro was introduced in Autoconf 2.62. Expand each argument, separated by commas. For a single @var{arg}, this effectively removes a layer of quoting, and @code{m4_unquote([@var{arg}])} is more efficient than the equivalent @code{m4_do([@var{arg}])}. For multiple arguments, this results in an unquoted list of expansions. This is commonly used with @code{m4_split}, in order to convert a single quoted list into a series of quoted elements. @end defmac The following example aims at emphasizing the difference between several scenarios: not using these macros, using @code{m4_defn}, using @code{m4_quote}, using @code{m4_dquote}, and using @code{m4_expand}. @example $ @kbd{cat example.m4} dnl Overquote, so that quotes are visible. m4_define([show], [$[]1 = [$1], $[]@@ = [$@@]]) m4_define([a], [A]) m4_define([mkargs], [1, 2[,] 3]) m4_define([arg1], [[$1]]) m4_divert([0])dnl show(a, b) show([a, b]) show(m4_quote(a, b)) show(m4_dquote(a, b)) show(m4_expand([a, b])) arg1(mkargs) arg1([mkargs]) arg1(m4_defn([mkargs])) arg1(m4_quote(mkargs)) arg1(m4_dquote(mkargs)) arg1(m4_expand([mkargs])) $ @kbd{autom4te -l m4sugar example.m4} $1 = A, $@@ = [A],[b] $1 = a, b, $@@ = [a, b] $1 = A,b, $@@ = [A,b] $1 = [A],[b], $@@ = [[A],[b]] $1 = A, b, $@@ = [A, b] 1 mkargs 1, 2[,] 3 1,2, 3 [1],[2, 3] 1, 2, 3 @end example @node Text processing Macros @subsection String manipulation in M4 The following macros may be used to manipulate strings in M4. Many of the macros in this section intentionally result in quoted strings as output, rather than subjecting the arguments to further expansions. As a result, if you are manipulating text that contains active M4 characters, the arguments are passed with single quoting rather than double. @defmac m4_append (@var{macro-name}, @var{string}, @ovar{separator}) @defmacx m4_append_uniq (@var{macro-name}, @var{string}, @ovar{separator} @ @ovar{if-uniq}, @ovar{if-duplicate}) @msindex{append} @msindex{append_uniq} Redefine @var{macro-name} to its former contents with @var{separator} and @var{string} added at the end. If @var{macro-name} was undefined before (but not if it was defined but empty), then no @var{separator} is added. As of Autoconf 2.62, neither @var{string} nor @var{separator} are expanded during this macro; instead, they are expanded when @var{macro-name} is invoked. @code{m4_append} can be used to grow strings, and @code{m4_append_uniq} to grow strings without duplicating substrings. Additionally, @code{m4_append_uniq} takes two optional parameters as of Autoconf 2.62; @var{if-uniq} is expanded if @var{string} was appended, and @var{if-duplicate} is expanded if @var{string} was already present. Also, @code{m4_append_uniq} warns if @var{separator} is not empty, but occurs within @var{string}, since that can lead to duplicates. Note that @code{m4_append} can scale linearly in the length of the final string, depending on the quality of the underlying M4 implementation, while @code{m4_append_uniq} has an inherent quadratic scaling factor. If an algorithm can tolerate duplicates in the final string, use the former for speed. If duplicates must be avoided, consider using @code{m4_set_add} instead (@pxref{Set manipulation Macros}). @example m4_define([active], [ACTIVE])dnl m4_append([sentence], [This is an])dnl m4_append([sentence], [ active ])dnl m4_append([sentence], [symbol.])dnl sentence @result{}This is an ACTIVE symbol. m4_undefine([active])dnl @result{}This is an active symbol. m4_append_uniq([list], [one], [, ], [new], [existing]) @result{}new m4_append_uniq([list], [one], [, ], [new], [existing]) @result{}existing m4_append_uniq([list], [two], [, ], [new], [existing]) @result{}new m4_append_uniq([list], [three], [, ], [new], [existing]) @result{}new m4_append_uniq([list], [two], [, ], [new], [existing]) @result{}existing list @result{}one, two, three m4_dquote(list) @result{}[one],[two],[three] m4_append([list2], [one], [[, ]])dnl m4_append_uniq([list2], [two], [[, ]])dnl m4_append([list2], [three], [[, ]])dnl list2 @result{}one, two, three m4_dquote(list2) @result{}[one, two, three] @end example @end defmac @defmac m4_append_uniq_w (@var{macro-name}, @var{strings}) @msindex{append_uniq_w} This macro was introduced in Autoconf 2.62. It is similar to @code{m4_append_uniq}, but treats @var{strings} as a whitespace separated list of words to append, and only appends unique words. @var{macro-name} is updated with a single space between new words. @example m4_append_uniq_w([numbers], [1 1 2])dnl m4_append_uniq_w([numbers], [ 2 3 ])dnl numbers @result{}1 2 3 @end example @end defmac @defmac m4_chomp (@var{string}) @defmacx m4_chomp_all (@var{string}) @msindex{chomp} @msindex{chomp_all} Output @var{string} in quotes, but without a trailing newline. The macro @code{m4_chomp} is slightly faster, and removes at most one newline; the macro @code{m4_chomp_all} removes all consecutive trailing newlines. Unlike @code{m4_flatten}, embedded newlines are left intact, and backslash does not influence the result. @end defmac @defmac m4_combine (@ovar{separator}, @var{prefix-list}, @ovar{infix}, @ @var{suffix-1}, @ovar{suffix-2}, @dots{}) @msindex{combine} This macro produces a quoted string containing the pairwise combination of every element of the quoted, comma-separated @var{prefix-list}, and every element from the @var{suffix} arguments. Each pairwise combination is joined with @var{infix} in the middle, and successive pairs are joined by @var{separator}. No expansion occurs on any of the arguments. No output occurs if either the @var{prefix} or @var{suffix} list is empty, but the lists can contain empty elements. @example m4_define([a], [oops])dnl m4_combine([, ], [[a], [b], [c]], [-], [1], [2], [3]) @result{}a-1, a-2, a-3, b-1, b-2, b-3, c-1, c-2, c-3 m4_combine([, ], [[a], [b]], [-]) @result{} m4_combine([, ], [[a], [b]], [-], []) @result{}a-, b- m4_combine([, ], [], [-], [1], [2]) @result{} m4_combine([, ], [[]], [-], [1], [2]) @result{}-1, -2 @end example @end defmac @defmac m4_escape (@var{string}) @msindex{escape} Convert all instances of @samp{[}, @samp{]}, @samp{#}, and @samp{$} within @var{string} into their respective quadrigraphs. The result is still a quoted string. @end defmac @defmac m4_flatten (@var{string}) @msindex{flatten} Flatten @var{string} into a single line. Delete all backslash-newline pairs, and replace all remaining newlines with a space. The result is still a quoted string. @end defmac @defmac m4_join (@ovar{separator}, @var{args}@dots{}) @defmacx m4_joinall (@ovar{separator}, @var{args}@dots{}) @msindex{join} @msindex{joinall} Concatenate each @var{arg}, separated by @var{separator}. @code{joinall} uses every argument, while @code{join} omits empty arguments so that there are no back-to-back separators in the output. The result is a quoted string. @example m4_define([active], [ACTIVE])dnl m4_join([|], [one], [], [active], [two]) @result{}one|active|two m4_joinall([|], [one], [], [active], [two]) @result{}one||active|two @end example Note that if all you intend to do is join @var{args} with commas between them, to form a quoted list suitable for @code{m4_foreach}, it is more efficient to use @code{m4_dquote}. @end defmac @defmac m4_newline (@ovar{text}) @msindex{newline} This macro was introduced in Autoconf 2.62, and expands to a newline, followed by any @var{text}. It is primarily useful for maintaining macro formatting, and ensuring that M4 does not discard leading whitespace during argument collection. @end defmac @defmac m4_normalize (@var{string}) @msindex{normalize} Remove leading and trailing spaces and tabs, sequences of backslash-then-newline, and replace multiple spaces, tabs, and newlines with a single space. This is a combination of @code{m4_flatten} and @code{m4_strip}. To determine if @var{string} consists only of bytes that would be removed by @code{m4_normalize}, you can use @code{m4_ifblank}. @end defmac @defmac m4_re_escape (@var{string}) @msindex{re_escape} Backslash-escape all characters in @var{string} that are active in regexps. @end defmac @c We cannot use @dvar because the macro expansion mistreats backslashes. @defmac m4_split (@var{string}, @r{[}@var{regexp} = @samp{[\t ]+}@r{]}) @msindex{split} Split @var{string} into an M4 list of elements quoted by @samp{[} and @samp{]}, while keeping white space at the beginning and at the end. If @var{regexp} is given, use it instead of @samp{[\t ]+} for splitting. If @var{string} is empty, the result is an empty list. @end defmac @defmac m4_strip (@var{string}) @msindex{strip} Strip whitespace from @var{string}. Sequences of spaces and tabs are reduced to a single space, then leading and trailing spaces are removed. The result is still a quoted string. Note that this does not interfere with newlines; if you want newlines stripped as well, consider @code{m4_flatten}, or do it all at once with @code{m4_normalize}. To quickly test if @var{string} has only whitespace, use @code{m4_ifblank}. @end defmac @defmac m4_text_box (@var{message}, @dvar{frame, -}) @msindex{text_box} Add a text box around @var{message}, using @var{frame} as the border character above and below the message. The @var{frame} argument must be a single byte, and does not support quadrigraphs. The frame correctly accounts for the subsequent expansion of @var{message}. For example: @example m4_define([macro], [abc])dnl m4_text_box([macro]) @result{}## --- ## @result{}## abc ## @result{}## --- ## @end example The @var{message} must contain balanced quotes and parentheses, although quadrigraphs can be used to work around this. @end defmac @defmac m4_text_wrap (@var{string}, @ovar{prefix}, @ @dvarv{prefix1, prefix}, @dvar{width, 79}) @msindex{text_wrap} Break @var{string} into a series of whitespace-separated words, then output those words separated by spaces, and wrapping lines any time the output would exceed @var{width} columns. If given, @var{prefix1} begins the first line, and @var{prefix} begins all wrapped lines. If @var{prefix1} is longer than @var{prefix}, then the first line consists of just @var{prefix1}. If @var{prefix} is longer than @var{prefix1}, padding is inserted so that the first word of @var{string} begins at the same indentation as all wrapped lines. Note that using literal tab characters in any of the arguments will interfere with the calculation of width. No expansions occur on @var{prefix}, @var{prefix1}, or the words of @var{string}, although quadrigraphs are recognized. For some examples: @example m4_text_wrap([Short string */], [ ], [/* ], [20]) @result{}/* Short string */ m4_text_wrap([Much longer string */], [ ], [/* ], [20]) @result{}/* Much longer @result{} string */ m4_text_wrap([Short doc.], [ ], [ --short ], [30]) @result{} --short Short doc. m4_text_wrap([Short doc.], [ ], [ --too-wide ], [30]) @result{} --too-wide @result{} Short doc. m4_text_wrap([Super long documentation.], [ ], [ --too-wide ], 30) @result{} --too-wide @result{} Super long @result{} documentation. @end example @end defmac @defmac m4_tolower (@var{string}) @defmacx m4_toupper (@var{string}) @msindex{tolower} @msindex{toupper} Return @var{string} with letters converted to upper or lower case, respectively. @end defmac @node Number processing Macros @subsection Arithmetic computation in M4 The following macros facilitate integer arithmetic operations. Where a parameter is documented as taking an arithmetic expression, you can use anything that can be parsed by @code{m4_eval}. @defmac m4_cmp (@var{expr-1}, @var{expr-2}) @msindex{cmp} Compare the arithmetic expressions @var{expr-1} and @var{expr-2}, and expand to @samp{-1} if @var{expr-1} is smaller, @samp{0} if they are equal, and @samp{1} if @var{expr-1} is larger. @end defmac @defmac m4_list_cmp (@var{list-1}, @var{list-2}) @msindex{list_cmp} Compare the two M4 lists consisting of comma-separated arithmetic expressions, left to right. Expand to @samp{-1} for the first element pairing where the value from @var{list-1} is smaller, @samp{1} where the value from @var{list-2} is smaller, or @samp{0} if both lists have the same values. If one list is shorter than the other, the remaining elements of the longer list are compared against zero. @example m4_list_cmp([1, 0], [1]) @result{}0 m4_list_cmp([1, [1 * 0]], [1, 0]) @result{}0 m4_list_cmp([1, 2], [1, 0]) @result{}1 m4_list_cmp([1, [1+1], 3],[1, 2]) @result{}1 m4_list_cmp([1, 2, -3], [1, 2]) @result{}-1 m4_list_cmp([1, 0], [1, 2]) @result{}-1 m4_list_cmp([1], [1, 2]) @result{}-1 @end example @end defmac @defmac m4_max (@var{arg}, @dots{}) @msindex{max} This macro was introduced in Autoconf 2.62. Expand to the decimal value of the maximum arithmetic expression among all the arguments. @end defmac @defmac m4_min (@var{arg}, @dots{}) @msindex{min} This macro was introduced in Autoconf 2.62. Expand to the decimal value of the minimum arithmetic expression among all the arguments. @end defmac @defmac m4_sign (@var{expr}) @msindex{sign} Expand to @samp{-1} if the arithmetic expression @var{expr} is negative, @samp{1} if it is positive, and @samp{0} if it is zero. @end defmac @anchor{m4_version_compare} @defmac m4_version_compare (@var{version-1}, @var{version-2}) @msindex{version_compare} This macro was introduced in Autoconf 2.53, but had a number of usability limitations that were not lifted until Autoconf 2.62. Compare the version strings @var{version-1} and @var{version-2}, and expand to @samp{-1} if @var{version-1} is smaller, @samp{0} if they are the same, or @samp{1} @var{version-2} is smaller. Version strings must be a list of elements separated by @samp{.}, @samp{,} or @samp{-}, where each element is a number along with optional case-insensitive letters designating beta releases. The comparison stops at the leftmost element that contains a difference, although a 0 element compares equal to a missing element. It is permissible to include commit identifiers in @var{version}, such as an abbreviated SHA1 of the commit, provided there is still a monotonically increasing prefix to allow for accurate version-based comparisons. For example, this paragraph was written when the development snapshot of autoconf claimed to be at version @samp{2.61a-248-dc51}, or 248 commits after the 2.61a release, with an abbreviated commit identification of @samp{dc51}. @example m4_version_compare([1.1], [2.0]) @result{}-1 m4_version_compare([2.0b], [2.0a]) @result{}1 m4_version_compare([1.1.1], [1.1.1a]) @result{}-1 m4_version_compare([1.2], [1.1.1a]) @result{}1 m4_version_compare([1.0], [1]) @result{}0 m4_version_compare([1.1pre], [1.1PRE]) @result{}0 m4_version_compare([1.1a], [1,10]) @result{}-1 m4_version_compare([2.61a], [2.61a-248-dc51]) @result{}-1 m4_version_compare([2.61b], [2.61a-248-dc51]) @result{}1 @end example @end defmac @defmac m4_version_prereq (@var{version}, @ovar{if-new-enough}, @ @dvar{if-old, m4_fatal}) @msindex{version_prereq} Compares @var{version} against the version of Autoconf currently running. If the running version is at @var{version} or newer, expand @var{if-new-enough}, but if @var{version} is larger than the version currently executing, expand @var{if-old}, which defaults to printing an error message and exiting m4sugar with status 63. When given only one argument, this behaves like @code{AC_PREREQ} (@pxref{Versioning}). Remember that the autoconf philosophy favors feature checks over version checks. @end defmac @node Set manipulation Macros @subsection Set manipulation in M4 @cindex Set manipulation @cindex Data structure, set @cindex Unordered set manipulation Sometimes, it is necessary to track a set of data, where the order does not matter and where there are no duplicates in the set. The following macros facilitate set manipulations. Each set is an opaque object, which can only be accessed via these basic operations. The underlying implementation guarantees linear scaling for set creation, which is more efficient than using the quadratic @code{m4_append_uniq}. Both set names and values can be arbitrary strings, except for unbalanced quotes. This implementation ties up memory for removed elements until the next operation that must traverse all the elements of a set; and although that may slow down some operations until the memory for removed elements is pruned, it still guarantees linear performance. @defmac m4_set_add (@var{set}, @var{value}, @ovar{if-uniq}, @ovar{if-dup}) @msindex{set_add} Adds the string @var{value} as a member of set @var{set}. Expand @var{if-uniq} if the element was added, or @var{if-dup} if it was previously in the set. Operates in amortized constant time, so that set creation scales linearly. @end defmac @defmac m4_set_add_all (@var{set}, @var{value}@dots{}) @msindex{set_add_all} Adds each @var{value} to the set @var{set}. This is slightly more efficient than repeatedly invoking @code{m4_set_add}. @end defmac @defmac m4_set_contains (@var{set}, @var{value}, @ovar{if-present}, @ @ovar{if-absent}) @msindex{set_contains} Expands @var{if-present} if the string @var{value} is a member of @var{set}, otherwise @var{if-absent}. @example m4_set_contains([a], [1], [yes], [no]) @result{}no m4_set_add([a], [1], [added], [dup]) @result{}added m4_set_add([a], [1], [added], [dup]) @result{}dup m4_set_contains([a], [1], [yes], [no]) @result{}yes m4_set_remove([a], [1], [removed], [missing]) @result{}removed m4_set_contains([a], [1], [yes], [no]) @result{}no m4_set_remove([a], [1], [removed], [missing]) @result{}missing @end example @end defmac @defmac m4_set_contents (@var{set}, @ovar{sep}) @defmacx m4_set_dump (@var{set}, @ovar{sep}) @msindex{set_contents} @msindex{set_dump} Expands to a single string consisting of all the members of the set @var{set}, each separated by @var{sep}, which is not expanded. @code{m4_set_contents} leaves the elements in @var{set} but reclaims any memory occupied by removed elements, while @code{m4_set_dump} is a faster one-shot action that also deletes the set. No provision is made for disambiguating members that contain a non-empty @var{sep} as a substring; use @code{m4_set_empty} to distinguish between an empty set and the set containing only the empty string. The order of the output is unspecified; in the current implementation, part of the speed of @code{m4_set_dump} results from using a different output order than @code{m4_set_contents}. These macros scale linearly in the size of the set before memory pruning, and @code{m4_set_contents([@var{set}], [@var{sep}])} is faster than @code{m4_joinall([@var{sep}]m4_set_listc([@var{set}]))}. @example m4_set_add_all([a], [1], [2], [3]) @result{} m4_set_contents([a], [-]) @result{}1-2-3 m4_joinall([-]m4_set_listc([a])) @result{}1-2-3 m4_set_dump([a], [-]) @result{}3-2-1 m4_set_contents([a]) @result{} m4_set_add([a], []) @result{} m4_set_contents([a], [-]) @result{} @end example @end defmac @defmac m4_set_delete (@var{set}) @msindex{set_delete} Delete all elements and memory associated with @var{set}. This is linear in the set size, and faster than removing one element at a time. @end defmac @defmac m4_set_difference (@var{seta}, @var{setb}) @defmacx m4_set_intersection (@var{seta}, @var{setb}) @defmacx m4_set_union (@var{seta}, @var{setb}) @msindex{set_difference} @msindex{set_intersection} @msindex{set_union} Compute the relation between @var{seta} and @var{setb}, and output the result as a list of quoted arguments without duplicates and with a leading comma. Set difference selects the elements in @var{seta} but not @var{setb}, intersection selects only elements in both sets, and union selects elements in either set. These actions are linear in the sum of the set sizes. The leading comma is necessary to distinguish between no elements and the empty string as the only element. @example m4_set_add_all([a], [1], [2], [3]) @result{} m4_set_add_all([b], [3], [], [4]) @result{} m4_set_difference([a], [b]) @result{},1,2 m4_set_difference([b], [a]) @result{},,4 m4_set_intersection([a], [b]) @result{},3 m4_set_union([a], [b]) @result{},1,2,3,,4 @end example @end defmac @defmac m4_set_empty (@var{set}, @ovar{if-empty}, @ovar{if-elements}) @msindex{set_empty} Expand @var{if-empty} if the set @var{set} has no elements, otherwise expand @var{if-elements}. This macro operates in constant time. Using this macro can help disambiguate output from @code{m4_set_contents} or @code{m4_set_list}. @end defmac @defmac m4_set_foreach (@var{set}, @var{variable}, @var{action}) @msindex{set_foreach} For each element in the set @var{set}, expand @var{action} with the macro @var{variable} defined as the set element. Behavior is unspecified if @var{action} recursively lists the contents of @var{set} (although listing other sets is acceptable), or if it modifies the set in any way other than removing the element currently contained in @var{variable}. This macro is faster than the corresponding @code{m4_foreach([@var{variable}], m4_indir([m4_dquote]m4_set_listc([@var{set}])), [@var{action}])}, although @code{m4_set_map} might be faster still. @example m4_set_add_all([a]m4_for([i], [1], [5], [], [,i])) @result{} m4_set_contents([a]) @result{}12345 m4_set_foreach([a], [i], [m4_if(m4_eval(i&1), [0], [m4_set_remove([a], i, [i])])]) @result{}24 m4_set_contents([a]) @result{}135 @end example @end defmac @defmac m4_set_list (@var{set}) @defmacx m4_set_listc (@var{set}) @msindex{set_list} @msindex{set_listc} Produce a list of arguments, where each argument is a quoted element from the set @var{set}. The variant @code{m4_set_listc} is unambiguous, by adding a leading comma if there are any set elements, whereas the variant @code{m4_set_list} cannot distinguish between an empty set and a set containing only the empty string. These can be directly used in macros that take multiple arguments, such as @code{m4_join} or @code{m4_set_add_all}, or wrapped by @code{m4_dquote} for macros that take a quoted list, such as @code{m4_map} or @code{m4_foreach}. Any memory occupied by removed elements is reclaimed during these macros. @example m4_set_add_all([a], [1], [2], [3]) @result{} m4_set_list([a]) @result{}1,2,3 m4_set_list([b]) @result{} m4_set_listc([b]) @result{} m4_count(m4_set_list([b])) @result{}1 m4_set_empty([b], [0], [m4_count(m4_set_list([b]))]) @result{}0 m4_set_add([b], []) @result{} m4_set_list([b]) @result{} m4_set_listc([b]) @result{}, m4_count(m4_set_list([b])) @result{}1 m4_set_empty([b], [0], [m4_count(m4_set_list([b]))]) @result{}1 @end example @end defmac @defmac m4_set_map (@var{set}, @var{action}) @msindex{set_map} For each element in the set @var{set}, expand @var{action} with a single argument of the set element. Behavior is unspecified if @var{action} recursively lists the contents of @var{set} (although listing other sets is acceptable), or if it modifies the set in any way other than removing the element passed as an argument. This macro is faster than either corresponding counterpart of @code{m4_map_args([@var{action}]m4_set_listc([@var{set}]))} or @code{m4_set_foreach([@var{set}], [var], [@var{action}(m4_defn([var]))])}. It is possible to use @code{m4_curry} if more than one argument is needed for @var{action}, although it is more efficient to use @code{m4_set_map_sep} in that case. @end defmac @defmac m4_set_map_sep (@var{set}, @ovar{pre}, @ovar{post}, @ovar{sep}) @msindex{set_map_sep} For each element in the set @var{set}, expand @code{@var{pre}[element]@var{post}}, additionally expanding @var{sep} between elements. Behavior is unspecified if the expansion recursively lists the contents of @var{set} (although listing other sets is acceptable), or if it modifies the set in any way other than removing the element visited by the expansion. This macro provides the most efficient means for non-destructively visiting the elements of a set; in particular, @code{m4_set_map([@var{set}], [@var{action}])} is equivalent to @code{m4_set_map_sep([@var{set}], [@var{action}(], [)])}. @end defmac @defmac m4_set_remove (@var{set}, @var{value}, @ovar{if-present}, @ @ovar{if-absent}) @msindex{set_remove} If @var{value} is an element in the set @var{set}, then remove it and expand @var{if-present}. Otherwise expand @var{if-absent}. This macro operates in constant time so that multiple removals will scale linearly rather than quadratically; but when used outside of @code{m4_set_foreach} or @code{m4_set_map}, it leaves memory occupied until the set is later compacted by @code{m4_set_contents} or @code{m4_set_list}. Several other set operations are then less efficient between the time of element removal and subsequent memory compaction, but still maintain their guaranteed scaling performance. @end defmac @defmac m4_set_size (@var{set}) @msindex{set_size} Expand to the size of the set @var{set}. This implementation operates in constant time, and is thus more efficient than @code{m4_eval(m4_count(m4_set_listc([set])) - 1)}. @end defmac @node Forbidden Patterns @subsection Forbidden Patterns @cindex Forbidden patterns @cindex Patterns, forbidden M4sugar provides a means to define suspicious patterns, patterns describing tokens which should not be found in the output. For instance, if an Autoconf @file{configure} script includes tokens such as @samp{AC_DEFINE}, or @samp{dnl}, then most probably something went wrong (typically a macro was not evaluated because of overquotation). M4sugar forbids all the tokens matching @samp{^_?m4_} and @samp{^dnl$}. Additional layers, such as M4sh and Autoconf, add additional forbidden patterns to the list. @defmac m4_pattern_forbid (@var{pattern}) @msindex{pattern_forbid} Declare that no token matching @var{pattern} must be found in the output. The output file is (temporarily) split into one word per line as part of the @command{autom4te} post-processing, with each line (and therefore word) then being checked against the Perl regular expression @var{pattern}. If the regular expression matches, and @code{m4_pattern_allow} does not also match, then an error is raised. Comments are not checked; this can be a problem if, for instance, you have some macro left unexpanded after an @samp{#include}. No consensus is currently found in the Autoconf community, as some people consider it should be valid to name macros in comments (which doesn't make sense to the authors of this documentation: input, such as macros, should be documented by @samp{dnl} comments; reserving @samp{#}-comments to document the output). As an example, if you define your own macros that begin with @samp{M_} and are composed from capital letters and underscores, the specification of @code{m4_pattern_forbid([^M_[A-Z_]+])} will ensure all your macros are expanded when not used in comments. As an example of a common use of this macro, consider what happens in packages that want to use the @command{pkg-config} script via the third-party @code{PKG_CHECK_MODULES} macro. By default, if a developer checks out the development tree but has not yet installed the pkg-config macros locally, they can manage to successfully run @command{autoconf} on the package, but the resulting @file{configure} file will likely result in a confusing shell message about a syntax error on the line mentioning the unexpanded @code{PKG_CHECK_MODULES} macro. On the other hand, if @file{configure.ac} includes @code{m4_pattern_forbid([^PKG_])}, the missing pkg-config macros will be detected immediately without allowing @command{autoconf} to succeed. @end defmac Of course, you might encounter exceptions to these generic rules, for instance you might have to refer to @samp{$m4_flags}. @defmac m4_pattern_allow (@var{pattern}) @msindex{pattern_allow} Any token matching @var{pattern} is allowed, including if it matches an @code{m4_pattern_forbid} pattern. For example, Gnulib uses @code{m4_pattern_forbid([^gl_])} to reserve the @code{gl_} namespace for itself, but also uses @code{m4_pattern_allow([^gl_ES$])} to avoid a false negative on the valid locale name. @end defmac @node Debugging via autom4te @section Debugging via autom4te @cindex debugging tips @cindex autom4te debugging tips @cindex m4sugar debugging tips At times, it is desirable to see what was happening inside m4, to see why output was not matching expectations. However, post-processing done by @command{autom4te} means that directly using the m4 builtin @code{m4_traceon} is likely to interfere with operation. Also, frequent diversion changes and the concept of forbidden tokens make it difficult to use @code{m4_defn} to generate inline comments in the final output. There are a couple of tools to help with this. One is the use of the @option{--trace} option provided by @command{autom4te} (as well as each of the programs that wrap @command{autom4te}, such as @command{autoconf}), in order to inspect when a macro is called and with which arguments. For example, when this paragraph was written, the autoconf version could be found by: @example $ @kbd{autoconf --trace=AC_INIT} configure.ac:23:AC_INIT:GNU Autoconf:2.63b.95-3963:bug-autoconf@@gnu.org $ @kbd{autoconf --trace='AC_INIT:version is $2'} version is 2.63b.95-3963 @end example Another trick is to print out the expansion of various m4 expressions to standard error or to an independent file, with no further m4 expansion, and without interfering with diversion changes or the post-processing done to standard output. @code{m4_errprintn} shows a given expression on standard error. For example, if you want to see the expansion of an autoconf primitive or of one of your autoconf macros, you can do it like this: @example $ @kbd{cat <<\EOF > configure.ac} AC_INIT m4_errprintn([The definition of AC_DEFINE_UNQUOTED:]) m4_errprintn(m4_defn([AC_DEFINE_UNQUOTED])) AC_OUTPUT EOF $ @kbd{autoconf} @error{}The definition of AC_DEFINE_UNQUOTED: @error{}_AC_DEFINE_Q([], $@@) @end example @node Programming in M4sh @chapter Programming in M4sh M4sh, pronounced ``mash'', is aiming at producing portable Bourne shell scripts. This name was coined by Lars J. Aas, who notes that, according to the Webster's Revised Unabridged Dictionary (1913): @quotation Mash \Mash\, n. [Akin to G. meisch, maisch, meische, maische, mash, wash, and prob.@: to AS. miscian to mix. See ``Mix''.] @enumerate 1 @item A mass of mixed ingredients reduced to a soft pulpy state by beating or pressure@enddots{} @item A mixture of meal or bran and water fed to animals. @item A mess; trouble. [Obs.] --Beau.@: & Fl. @end enumerate @end quotation M4sh reserves the M4 macro namespace @samp{^_AS_} for internal use, and the namespace @samp{^AS_} for M4sh macros. It also reserves the shell and environment variable namespace @samp{^as_}, and the here-document delimiter namespace @samp{^_AS[A-Z]} in the output file. You should not define your own macros or output shell code that conflicts with these namespaces. @menu * Common Shell Constructs:: Portability layer for common shell constructs * Polymorphic Variables:: Support for indirect variable names * Initialization Macros:: Macros to establish a sane shell environment * File Descriptor Macros:: File descriptor macros for input and output @end menu @node Common Shell Constructs @section Common Shell Constructs M4sh provides portable alternatives for some common shell constructs that unfortunately are not portable in practice. @c Deprecated, to be replaced by a better API @ignore @defmac AS_BASENAME (@var{file-name}) @asindex{BASENAME} Output the non-directory portion of @var{file-name}. For example, if @code{$file} is @samp{/one/two/three}, the command @code{base=`AS_BASENAME(["$file"])`} sets @code{base} to @samp{three}. @end defmac @end ignore @defmac AS_BOX (@var{text}, @dvar{char, -}) @asindex{BOX} Expand into shell code that will output @var{text} surrounded by a box with @var{char} in the top and bottom border. @var{text} should not contain a newline, but may contain shell expansions valid for unquoted here-documents. @var{char} defaults to @samp{-}, but can be any character except @samp{/}, @samp{'}, @samp{"}, @samp{\}, @samp{&}, or @samp{`}. This is useful for outputting a comment box into log files to separate distinct phases of script operation. @end defmac @defmac AS_CASE (@var{word}, @ovar{pattern1}, @ovar{if-matched1}, @ @dots{}, @ovar{default}) @asindex{CASE} Expand into a shell @samp{case} statement, where @var{word} is matched against one or more patterns. @var{if-matched} is run if the corresponding pattern matched @var{word}, else @var{default} is run. @xref{Prerequisite Macros} for why this macro should be used instead of plain @samp{case} in code outside of an @code{AC_DEFUN} macro, when the contents of the @samp{case} use @code{AC_REQUIRE} directly or indirectly. @xref{case, , Limitations of Shell Builtins}, for how this macro avoids some portability issues. @xref{Balancing Parentheses} for how this macro lets you write code with balanced parentheses even if your code must run on obsolescent shells. @end defmac @c Deprecated, to be replaced by a better API @defmac AS_DIRNAME (@var{file-name}) @asindex{DIRNAME} Output the directory portion of @var{file-name}. For example, if @code{$file} is @samp{/one/two/three}, the command @code{dir=`AS_DIRNAME(["$file"])`} sets @code{dir} to @samp{/one/two}. This interface may be improved in the future to avoid forks and losing trailing newlines. @end defmac @defmac AS_ECHO (@var{word}) @asindex{ECHO} Emits @var{word} to the standard output, followed by a newline. @var{word} must be a single shell word (typically a quoted string). The bytes of @var{word} are output as-is, even if it starts with "-" or contains "\". Redirections can be placed outside the macro invocation. This is much more portable than using @command{echo} (@pxref{echo, , Limitations of Shell Builtins}). @end defmac @defmac AS_ECHO_N (@var{word}) @asindex{ECHO_N} Emits @var{word} to the standard output, without a following newline. @var{word} must be a single shell word (typically a quoted string) and, for portability, should not include more than one newline. The bytes of @var{word} are output as-is, even if it starts with "-" or contains "\". Redirections can be placed outside the macro invocation. @end defmac @c We cannot use @dvar because the macro expansion mistreats backslashes. @defmac AS_ESCAPE (@var{string}, @r{[}@var{chars} = @samp{`\"$}@r{]}) @asindex{ESCAPE} Expands to @var{string}, with any characters in @var{chars} escaped with a backslash (@samp{\}). @var{chars} should be at most four bytes long, and only contain characters from the set @samp{`\"$}; however, characters may be safely listed more than once in @var{chars} for the sake of syntax highlighting editors. The current implementation expands @var{string} after adding escapes; if @var{string} contains macro calls that in turn expand to text needing shell quoting, you can use @code{AS_ESCAPE(m4_dquote(m4_expand([string])))}. The default for @var{chars} (@samp{\"$`}) is the set of characters needing escapes when @var{string} will be used literally within double quotes. One common variant is the set of characters to protect when @var{string} will be used literally within back-ticks or an unquoted here-document (@samp{\$`}). Another common variant is @samp{""}, which can be used to form a double-quoted string containing the same expansions that would have occurred if @var{string} were expanded in an unquoted here-document; however, when using this variant, care must be taken that @var{string} does not use double quotes within complex variable expansions (such as @samp{$@{foo-`echo "hi"`@}}) that would be broken with improper escapes. This macro is often used with @code{AS_ECHO}. For an example, observe the output generated by the shell code generated from this snippet: @example foo=bar AS_ECHO(["AS_ESCAPE(["$foo" = ])AS_ESCAPE(["$foo"], [""])"]) @result{}"$foo" = "bar" m4_define([macro], [a, [\b]]) AS_ECHO(["AS_ESCAPE([[macro]])"]) @result{}macro AS_ECHO(["AS_ESCAPE([macro])"]) @result{}a, b AS_ECHO(["AS_ESCAPE(m4_dquote(m4_expand([macro])))"]) @result{}a, \b @end example @comment Should we add AS_ESCAPE_SINGLE? If we do, we can optimize in @comment the case of @var{string} that does not contain '. To escape a string that will be placed within single quotes, use: @example m4_bpatsubst([[@var{string}]], ['], ['\\'']) @end example @end defmac @defmac AS_EXECUTABLE_P (@var{file}) @asindex{EXECUTABLE_P} Emit code to probe whether @var{file} is a regular file with executable permissions (and not a directory with search permissions). The caller is responsible for quoting @var{file}. @end defmac @defmac AS_EXIT (@dvar{status, $?}) @asindex{EXIT} Emit code to exit the shell with @var{status}, defaulting to @samp{$?}. This macro works around shells that see the exit status of the command prior to @code{exit} inside a @samp{trap 0} handler (@pxref{trap, , Limitations of Shell Builtins}). @end defmac @defmac AS_IF (@var{test1}, @ovar{run-if-true1}, @dots{}, @ovar{run-if-false}) @asindex{IF} Run shell code @var{test1}. If @var{test1} exits with a zero status then run shell code @var{run-if-true1}, else examine further tests. If no test exits with a zero status, run shell code @var{run-if-false}, with simplifications if either @var{run-if-true1} or @var{run-if-false} is empty. For example, @example AS_IF([test "x$foo" = xyes], [HANDLE_FOO([yes])], [test "x$foo" != xno], [HANDLE_FOO([maybe])], [echo foo not specified]) @end example @noindent ensures any required macros of @code{HANDLE_FOO} are expanded before the first test. The @var{run-if-false} argument should either consist entirely of blanks, or expand to a nonempty shell command. For example, @code{AS_IF([:], [:], [[]])} is invalid because its @var{run-if-false} argument contains the nonblank characters @code{[]} which expand to nothing. This restriction on @var{run-if-false} also applies to other macros with ``if-false'' arguments denoting shell commands. This macro should be used instead of plain @samp{if} in code outside of an @code{AC_DEFUN} macro, when the contents of the @samp{if} use @code{AC_REQUIRE} directly or indirectly (@pxref{Prerequisite Macros}). @end defmac @defmac AS_MKDIR_P (@var{file-name}) @asindex{MKDIR_P} Make the directory @var{file-name}, including intervening directories as necessary. This is equivalent to @samp{mkdir -p -- @var{file-name}}, except that it is portable to older versions of @command{mkdir} that lack support for the @option{-p} option or for the @option{--} delimiter (@pxref{mkdir, , Limitations of Usual Tools}). Also, @code{AS_MKDIR_P} succeeds if @var{file-name} is a symbolic link to an existing directory, even though Posix is unclear whether @samp{mkdir -p} should succeed in that case. If creation of @var{file-name} fails, exit the script. Also see the @code{AC_PROG_MKDIR_P} macro (@pxref{Particular Programs}). @end defmac @defmac AS_SET_STATUS (@var{status}) @asindex{SET_STATUS} Emit shell code to set the value of @samp{$?} to @var{status}, as efficiently as possible. However, this is not guaranteed to abort a shell running with @code{set -e} (@pxref{set, , Limitations of Shell Builtins}). This should also be used at the end of a complex shell function instead of @samp{return} (@pxref{Shell Functions}) to avoid a DJGPP shell bug. @end defmac @defmac AS_TR_CPP (@var{expression}) @asindex{TR_CPP} Transform @var{expression} into a valid right-hand side for a C @code{#define}. For example: @example # This outputs "#define HAVE_CHAR_P 1". # Notice the m4 quoting around #, to prevent an m4 comment type="char *" echo "[#]define AS_TR_CPP([HAVE_$type]) 1" @end example @end defmac @defmac AS_TR_SH (@var{expression}) @asindex{TR_SH} Transform @var{expression} into shell code that generates a valid shell variable name. The result is literal when possible at m4 time, but must be used with @code{eval} if @var{expression} causes shell indirections. For example: @example # This outputs "Have it!". header="sys/some file.h" eval AS_TR_SH([HAVE_$header])=yes if test "x$HAVE_sys_some_file_h" = xyes; then echo "Have it!"; fi @end example @end defmac @defmac AS_SET_CATFILE (@var{var}, @var{dir}, @var{file}) @asindex{SET_CATFILE} Set the polymorphic shell variable @var{var} to @var{dir}/@var{file}, but optimizing the common cases (@var{dir} or @var{file} is @samp{.}, @var{file} is absolute, etc.). @end defmac @defmac AS_UNSET (@var{var}) @asindex{UNSET} Unsets the shell variable @var{var}, working around bugs in older shells (@pxref{unset, , Limitations of Shell Builtins}). @var{var} can be a literal or indirect variable name. @end defmac @defmac AS_VERSION_COMPARE (@var{version-1}, @var{version-2}, @ @ovar{action-if-less}, @ovar{action-if-equal}, @ovar{action-if-greater}) @asindex{VERSION_COMPARE} Compare two strings @var{version-1} and @var{version-2}, possibly containing shell variables, as version strings, and expand @var{action-if-less}, @var{action-if-equal}, or @var{action-if-greater} depending upon the result. The algorithm to compare is similar to the one used by strverscmp in glibc (@pxref{String/Array Comparison, , String/Array Comparison, libc, The GNU C Library}). @end defmac @node Polymorphic Variables @section Support for indirect variable names @cindex variable name indirection @cindex polymorphic variable name @cindex indirection, variable name Often, it is convenient to write a macro that will emit shell code operating on a shell variable. The simplest case is when the variable name is known. But a more powerful idiom is writing shell code that can work through an indirection, where another variable or command substitution produces the name of the variable to actually manipulate. M4sh supports the notion of polymorphic shell variables, making it easy to write a macro that can deal with either literal or indirect variable names and output shell code appropriate for both use cases. Behavior is undefined if expansion of an indirect variable does not result in a literal variable name. @defmac AS_LITERAL_IF (@var{expression}, @ovar{if-literal}, @ovar{if-not}, @ @dvarv{if-simple-ref, if-not}) @defmacx AS_LITERAL_WORD_IF (@var{expression}, @ovar{if-literal}, @ @ovar{if-not}, @dvarv{if-simple-ref, if-not}) @asindex{LITERAL_IF} @asindex{LITERAL_WORD_IF} If the expansion of @var{expression} is definitely a shell literal, expand @var{if-literal}. If the expansion of @var{expression} looks like it might contain shell indirections (such as @code{$var} or @code{`expr`}), then @var{if-not} is expanded. Sometimes, it is possible to output optimized code if @var{expression} consists only of shell variable expansions (such as @code{$@{var@}}), in which case @var{if-simple-ref} can be provided; but defaulting to @var{if-not} should always be safe. @code{AS_LITERAL_WORD_IF} only expands @var{if-literal} if @var{expression} looks like a single shell word, containing no whitespace; while @code{AS_LITERAL_IF} allows whitespace in @var{expression}. In order to reduce the time spent recognizing whether an @var{expression} qualifies as a literal or a simple indirection, the implementation is somewhat conservative: @var{expression} must be a single shell word (possibly after stripping whitespace), consisting only of bytes that would have the same meaning whether unquoted or enclosed in double quotes (for example, @samp{a.b} results in @var{if-literal}, even though it is not a valid shell variable name; while both @samp{'a'} and @samp{[$]} result in @var{if-not}, because they behave differently than @samp{"'a'"} and @samp{"[$]"}). This macro can be used in contexts for recognizing portable file names (such as in the implementation of @code{AC_LIBSOURCE}), or coupled with some transliterations for forming valid variable names (such as in the implementation of @code{AS_TR_SH}, which uses an additional @code{m4_translit} to convert @samp{.} to @samp{_}). This example shows how to read the contents of the shell variable @code{bar}, exercising all three arguments to @code{AS_LITERAL_IF}. It results in a script that will output the line @samp{hello} three times. @example AC_DEFUN([MY_ACTION], [AS_LITERAL_IF([$1], [echo "$$1"], @c $$ [AS_VAR_COPY([var], [$1]) echo "$var"], [eval 'echo "$'"$1"\"])]) foo=bar bar=hello MY_ACTION([bar]) MY_ACTION([`echo bar`]) MY_ACTION([$foo]) @end example @end defmac @defmac AS_VAR_APPEND (@var{var}, @var{text}) @asindex{VAR_APPEND} Emit shell code to append the shell expansion of @var{text} to the end of the current contents of the polymorphic shell variable @var{var}, taking advantage of shells that provide the @samp{+=} extension for more efficient scaling. For situations where the final contents of @var{var} are relatively short (less than 256 bytes), it is more efficient to use the simpler code sequence of @code{@var{var}=$@{@var{var}@}@var{text}} (or its polymorphic equivalent of @code{AS_VAR_COPY([t], [@var{var}])} and @code{AS_VAR_SET([@var{var}], ["$t"@var{text}])}). But in the case when the script will be repeatedly appending text into @code{var}, issues of scaling start to become apparent. A naive implementation requires execution time linear to the length of the current contents of @var{var} as well as the length of @var{text} for a single append, for an overall quadratic scaling with multiple appends. This macro takes advantage of shells which provide the extension @code{@var{var}+=@var{text}}, which can provide amortized constant time for a single append, for an overall linear scaling with multiple appends. Note that unlike @code{AS_VAR_SET}, this macro requires that @var{text} be quoted properly to avoid field splitting and file name expansion. @end defmac @defmac AS_VAR_ARITH (@var{var}, @var{expression}) @asindex{VAR_ARITH} Emit shell code to compute the arithmetic expansion of @var{expression}, assigning the result as the contents of the polymorphic shell variable @var{var}. The code takes advantage of shells that provide @samp{$(())} for fewer forks, but uses @command{expr} as a fallback. Therefore, the syntax for a valid @var{expression} is rather limited: all operators must occur as separate shell arguments and with proper quoting, there is no portable equality operator, all variables containing numeric values must be expanded prior to the computation, all numeric values must be provided in decimal without leading zeroes, and the first shell argument should not be a negative number. In the following example, this snippet will print @samp{(2+3)*4 == 20}. @example bar=3 AS_VAR_ARITH([foo], [\( 2 + $bar \) \* 4]) echo "(2+$bar)*4 == $foo" @end example @end defmac @defmac AS_VAR_COPY (@var{dest}, @var{source}) @asindex{VAR_COPY} Emit shell code to assign the contents of the polymorphic shell variable @var{source} to the polymorphic shell variable @var{dest}. For example, executing this M4sh snippet will output @samp{bar hi}: @example foo=bar bar=hi AS_VAR_COPY([a], [foo]) AS_VAR_COPY([b], [$foo]) echo "$a $b" @end example When it is necessary to access the contents of an indirect variable inside a shell double-quoted context, the recommended idiom is to first copy the contents into a temporary literal shell variable. @smallexample for header in stdint_h inttypes_h ; do AS_VAR_COPY([var], [ac_cv_header_$header]) echo "$header detected: $var" done @end smallexample @end defmac @comment AS_VAR_GET is intentionally undocumented; it can't handle @comment trailing newlines uniformly, and forks too much. @defmac AS_VAR_IF (@var{var}, @ovar{word}, @ovar{if-equal}, @ @ovar{if-not-equal}) @asindex{VAR_IF} Output a shell conditional statement. If the contents of the polymorphic shell variable @var{var} match the string @var{word}, execute @var{if-equal}; otherwise execute @var{if-not-equal}. @var{word} must be a single shell word (typically a quoted string). Avoids shell bugs if an interrupt signal arrives while a command substitution in @var{var} is being expanded. @end defmac @defmac AS_VAR_PUSHDEF (@var{m4-name}, @var{value}) @defmacx AS_VAR_POPDEF (@var{m4-name}) @asindex{VAR_PUSHDEF} @asindex{VAR_POPDEF} @cindex composing variable names @cindex variable names, composing A common M4sh idiom involves composing shell variable names from an m4 argument (for example, writing a macro that uses a cache variable). @var{value} can be an arbitrary string, which will be transliterated into a valid shell name by @code{AS_TR_SH}. In order to access the composed variable name based on @var{value}, it is easier to declare a temporary m4 macro @var{m4-name} with @code{AS_VAR_PUSHDEF}, then use that macro as the argument to subsequent @code{AS_VAR} macros as a polymorphic variable name, and finally free the temporary macro with @code{AS_VAR_POPDEF}. These macros are often followed with @code{dnl}, to avoid excess newlines in the output. Here is an involved example, that shows the power of writing macros that can handle composed shell variable names: @example m4_define([MY_CHECK_HEADER], [AS_VAR_PUSHDEF([my_Header], [ac_cv_header_$1])dnl AS_VAR_IF([my_Header], [yes], [echo "header $1 detected"])dnl AS_VAR_POPDEF([my_Header])dnl ]) MY_CHECK_HEADER([stdint.h]) for header in inttypes.h stdlib.h ; do MY_CHECK_HEADER([$header]) done @end example @noindent In the above example, @code{MY_CHECK_HEADER} can operate on polymorphic variable names. In the first invocation, the m4 argument is @code{stdint.h}, which transliterates into a literal @code{stdint_h}. As a result, the temporary macro @code{my_Header} expands to the literal shell name @samp{ac_cv_header_stdint_h}. In the second invocation, the m4 argument to @code{MY_CHECK_HEADER} is @code{$header}, and the temporary macro @code{my_Header} expands to the indirect shell name @samp{$as_my_Header}. During the shell execution of the for loop, when @samp{$header} contains @samp{inttypes.h}, then @samp{$as_my_Header} contains @samp{ac_cv_header_inttypes_h}. If this script is then run on a platform where all three headers have been previously detected, the output of the script will include: @smallexample header stdint.h detected header inttypes.h detected header stdlib.h detected @end smallexample @end defmac @defmac AS_VAR_SET (@var{var}, @ovar{value}) @asindex{VAR_SET} Emit shell code to assign the contents of the polymorphic shell variable @var{var} to the shell expansion of @var{value}. @var{value} is not subject to field splitting or file name expansion, so if command substitution is used, it may be done with @samp{`""`} rather than using an intermediate variable (@pxref{Shell Substitutions}). However, @var{value} does undergo rescanning for additional macro names; behavior is unspecified if late expansion results in any shell meta-characters. @end defmac @defmac AS_VAR_SET_IF (@var{var}, @ovar{if-set}, @ovar{if-undef}) @asindex{VAR_SET_IF} Emit a shell conditional statement, which executes @var{if-set} if the polymorphic shell variable @code{var} is set to any value, and @var{if-undef} otherwise. @end defmac @defmac AS_VAR_TEST_SET (@var{var}) @asindex{VAR_TEST_SET} Emit a shell statement that results in a successful exit status only if the polymorphic shell variable @code{var} is set. @end defmac @node Initialization Macros @section Initialization Macros @defmac AS_BOURNE_COMPATIBLE @asindex{BOURNE_COMPATIBLE} Set up the shell to be more compatible with the Bourne shell as standardized by Posix, if possible. This may involve setting environment variables, or setting options, or similar implementation-specific actions. This macro is deprecated, since @code{AS_INIT} already invokes it. @end defmac @defmac AS_INIT @asindex{INIT} @evindex LC_ALL @evindex SHELL Initialize the M4sh environment. This macro calls @code{m4_init}, then outputs the @code{#! /bin/sh} line, a notice about where the output was generated from, and code to sanitize the environment for the rest of the script. Among other initializations, this sets @env{SHELL} to the shell chosen to run the script (@pxref{CONFIG_SHELL}), and @env{LC_ALL} to ensure the C locale. Finally, it changes the current diversion to @code{BODY}. @code{AS_INIT} is called automatically by @code{AC_INIT} and @code{AT_INIT}, so shell code in @file{configure}, @file{config.status}, and @file{testsuite} all benefit from a sanitized shell environment. @end defmac @defmac AS_INIT_GENERATED (@var{file}, @ovar{comment}) @asindex{INIT_GENERATED} Emit shell code to start the creation of a subsidiary shell script in @var{file}, including changing @var{file} to be executable. This macro populates the child script with information learned from the parent (thus, the emitted code is equivalent in effect, but more efficient, than the code output by @code{AS_INIT}, @code{AS_BOURNE_COMPATIBLE}, and @code{AS_SHELL_SANITIZE}). If present, @var{comment} is output near the beginning of the child, prior to the shell initialization code, and is subject to parameter expansion, command substitution, and backslash quote removal. The parent script should check the exit status after this macro, in case @var{file} could not be properly created (for example, if the disk was full). If successfully created, the parent script can then proceed to append additional M4sh constructs into the child script. Note that the child script starts life without a log file open, so if the parent script uses logging (@pxref{AS_MESSAGE_LOG_FD}), you must temporarily disable any attempts to use the log file until after emitting code to open a log within the child. On the other hand, if the parent script has @code{AS_MESSAGE_FD} redirected somewhere besides @samp{1}, then the child script already has code that copies stdout to that descriptor. Currently, the suggested idiom for writing a M4sh shell script from within another script is: @example AS_INIT_GENERATED([@var{file}], [[# My child script. ]]) || @{ AS_ECHO(["Failed to create child script"]); AS_EXIT; @} m4_pushdef([AS_MESSAGE_LOG_FD])dnl cat >> "@var{file}" <<\__EOF__ # Code to initialize AS_MESSAGE_LOG_FD m4_popdef([AS_MESSAGE_LOG_FD])dnl # Additional code __EOF__ @end example This, however, may change in the future as the M4sh interface is stabilized further. Also, be aware that use of @env{LINENO} within the child script may report line numbers relative to their location in the parent script, even when using @code{AS_LINENO_PREPARE}, if the parent script was unable to locate a shell with working @env{LINENO} support. @end defmac @defmac AS_LINENO_PREPARE @asindex{LINENO_PREPARE} @evindex LINENO Find a shell that supports the special variable @env{LINENO}, which contains the number of the currently executing line. This macro is automatically invoked by @code{AC_INIT} in configure scripts. @end defmac @defmac AS_ME_PREPARE @asindex{ME_PREPARE} Set up variable @env{as_me} to be the basename of the currently executing script. This macro is automatically invoked by @code{AC_INIT} in configure scripts. @end defmac @defmac AS_TMPDIR (@var{prefix}, @dvar{dir, $@{TMPDIR:=/tmp@}}) @asindex{TMPDIR} @evindex TMPDIR @ovindex tmp Create, as safely as possible, a temporary sub-directory within @var{dir} with a name starting with @var{prefix}. @var{prefix} should be 2--4 characters, to make it slightly easier to identify the owner of the directory. If @var{dir} is omitted, then the value of @env{TMPDIR} will be used (defaulting to @samp{/tmp}). On success, the name of the newly created directory is stored in the shell variable @code{tmp}. On error, the script is aborted. Typically, this macro is coupled with some exit traps to delete the created directory and its contents on exit or interrupt. However, there is a slight window between when the directory is created and when the name is actually known to the shell, so an interrupt at the right moment might leave the temporary directory behind. Hence it is important to use a @var{prefix} that makes it easier to determine if a leftover temporary directory from an interrupted script is safe to delete. The use of the output variable @samp{$tmp} rather than something in the @samp{as_} namespace is historical; it has the unfortunate consequence that reusing this otherwise common name for any other purpose inside your script has the potential to break any cleanup traps designed to remove the temporary directory. @end defmac @defmac AS_SHELL_SANITIZE @asindex{SHELL_SANITIZE} Initialize the shell suitably for @command{configure} scripts. This has the effect of @code{AS_BOURNE_COMPATIBLE}, and sets some other environment variables for predictable results from configuration tests. For example, it sets @env{LC_ALL} to change to the default C locale. @xref{Special Shell Variables}. This macro is deprecated, since @code{AS_INIT} already invokes it. @end defmac @node File Descriptor Macros @section File Descriptor Macros @cindex input @cindex standard input @cindex file descriptors @cindex descriptors @cindex low-level output @cindex output, low-level The following macros define file descriptors used to output messages (or input values) from @file{configure} scripts. For example: @example echo "$wombats found" >&AS_MESSAGE_LOG_FD echo 'Enter desired kangaroo count:' >&AS_MESSAGE_FD read kangaroos <&AS_ORIGINAL_STDIN_FD` @end example @noindent However doing so is seldom needed, because Autoconf provides higher level macros as described below. @defmac AS_MESSAGE_FD @asindex{MESSAGE_FD} The file descriptor for @samp{checking for...} messages and results. By default, @code{AS_INIT} sets this to @samp{1} for standalone M4sh clients. However, @code{AC_INIT} shuffles things around to another file descriptor, in order to allow the @option{-q} option of @command{configure} to choose whether messages should go to the script's standard output or be discarded. If you want to display some messages, consider using one of the printing macros (@pxref{Printing Messages}) instead. Copies of messages output via these macros are also recorded in @file{config.log}. @end defmac @anchor{AS_MESSAGE_LOG_FD} @defmac AS_MESSAGE_LOG_FD @asindex{MESSAGE_LOG_FD} This must either be empty, or expand to a file descriptor for log messages. By default, @code{AS_INIT} sets this macro to the empty string for standalone M4sh clients, thus disabling logging. However, @code{AC_INIT} shuffles things around so that both @command{configure} and @command{config.status} use @file{config.log} for log messages. Macros that run tools, like @code{AC_COMPILE_IFELSE} (@pxref{Running the Compiler}), redirect all output to this descriptor. You may want to do so if you develop such a low-level macro. @end defmac @defmac AS_ORIGINAL_STDIN_FD @asindex{ORIGINAL_STDIN_FD} This must expand to a file descriptor for the original standard input. By default, @code{AS_INIT} sets this macro to @samp{0} for standalone M4sh clients. However, @code{AC_INIT} shuffles things around for safety. When @command{configure} runs, it may accidentally execute an interactive command that has the same name as the non-interactive meant to be used or checked. If the standard input was the terminal, such interactive programs would cause @command{configure} to stop, pending some user input. Therefore @command{configure} redirects its standard input from @file{/dev/null} during its initialization. This is not normally a problem, since @command{configure} normally does not need user input. In the extreme case where your @file{configure} script really needs to obtain some values from the original standard input, you can read them explicitly from @code{AS_ORIGINAL_STDIN_FD}. @end defmac @c =================================================== Writing Autoconf Macros. @node Writing Autoconf Macros @chapter Writing Autoconf Macros When you write a feature test that could be applicable to more than one software package, the best thing to do is encapsulate it in a new macro. Here are some instructions and guidelines for writing Autoconf macros. You should also familiarize yourself with M4sugar (@pxref{Programming in M4}) and M4sh (@pxref{Programming in M4sh}). @menu * Macro Definitions:: Basic format of an Autoconf macro * Macro Names:: What to call your new macros * Dependencies Between Macros:: What to do when macros depend on other macros * Obsoleting Macros:: Warning about old ways of doing things * Coding Style:: Writing Autoconf macros @`a la Autoconf @end menu @node Macro Definitions @section Macro Definitions @defmac AC_DEFUN (@var{name}, @ovar{body}) @acindex{DEFUN} Autoconf macros are defined using the @code{AC_DEFUN} macro, which is similar to the M4 builtin @code{m4_define} macro; this creates a macro named @var{name} and with @var{body} as its expansion. In addition to defining a macro, @code{AC_DEFUN} adds to it some code that is used to constrain the order in which macros are called, while avoiding redundant output (@pxref{Prerequisite Macros}). @end defmac An Autoconf macro definition looks like this: @example AC_DEFUN(@var{macro-name}, @var{macro-body}) @end example You can refer to any arguments passed to the macro as @samp{$1}, @samp{$2}, etc. @xref{Definitions, , How to define new macros, m4, GNU M4}, for more complete information on writing M4 macros. Most macros fall in one of two general categories. The first category includes macros which take arguments, in order to generate output parameterized by those arguments. Macros in this category are designed to be directly expanded, often multiple times, and should not be used as the argument to @code{AC_REQUIRE}. The other category includes macros which are shorthand for a fixed block of text, and therefore do not take arguments. For this category of macros, directly expanding the macro multiple times results in redundant output, so it is more common to use the macro as the argument to @code{AC_REQUIRE}, or to declare the macro with @code{AC_DEFUN_ONCE} (@pxref{One-Shot Macros}). Be sure to properly quote both the @var{macro-body} @emph{and} the @var{macro-name} to avoid any problems if the macro happens to have been previously defined. Each macro should have a header comment that gives its prototype, and a brief description. When arguments have default values, display them in the prototype. For example: @example # AC_MSG_ERROR(ERROR, [EXIT-STATUS = 1]) # -------------------------------------- m4_define([AC_MSG_ERROR], [@{ AS_MESSAGE([error: $1], [2]) exit m4_default([$2], [1]); @}]) @end example Comments about the macro should be left in the header comment. Most other comments make their way into @file{configure}, so just keep using @samp{#} to introduce comments. @cindex @code{dnl} If you have some special comments about pure M4 code, comments that make no sense in @file{configure} and in the header comment, then use the builtin @code{dnl}: it causes M4 to discard the text through the next newline. Keep in mind that @code{dnl} is rarely needed to introduce comments; @code{dnl} is more useful to get rid of the newlines following macros that produce no output, such as @code{AC_REQUIRE}. Public third-party macros need to use @code{AC_DEFUN}, and not @code{m4_define}, in order to be found by @command{aclocal} (@pxref{Extending aclocal,,, automake, GNU Automake}). Additionally, if it is ever determined that a macro should be made obsolete, it is easy to convert from @code{AC_DEFUN} to @code{AU_DEFUN} in order to have @command{autoupdate} assist the user in choosing a better alternative, but there is no corresponding way to make @code{m4_define} issue an upgrade notice (@pxref{AU_DEFUN}). There is another subtle, but important, difference between using @code{m4_define} and @code{AC_DEFUN}: only the former is unaffected by @code{AC_REQUIRE}. When writing a file, it is always safe to replace a block of text with a @code{m4_define} macro that will expand to the same text. But replacing a block of text with an @code{AC_DEFUN} macro with the same content does not necessarily give the same results, because it changes the location where any embedded but unsatisfied @code{AC_REQUIRE} invocations within the block will be expanded. For an example of this, see @ref{Expanded Before Required}. @node Macro Names @section Macro Names All of the public Autoconf macros have all-uppercase names in the namespace @samp{^AC_} to prevent them from accidentally conflicting with other text; Autoconf also reserves the namespace @samp{^_AC_} for internal macros. All shell variables that they use for internal purposes have mostly-lowercase names starting with @samp{ac_}. Autoconf also uses here-document delimiters in the namespace @samp{^_AC[A-Z]}. During @command{configure}, files produced by Autoconf make heavy use of the file system namespace @samp{^conf}. Since Autoconf is built on top of M4sugar (@pxref{Programming in M4sugar}) and M4sh (@pxref{Programming in M4sh}), you must also be aware of those namespaces (@samp{^_?\(m4\|AS\)_}). And since @file{configure.ac} is also designed to be scanned by Autoheader, Autoscan, Autoupdate, and Automake, you should be aware of the @samp{^_?A[HNUM]_} namespaces. In general, you @emph{should not use} the namespace of a package that does not own the macro or shell code you are writing. To ensure that your macros don't conflict with present or future Autoconf macros, you should prefix your own macro names and any shell variables they use with some other sequence. Possibilities include your initials, or an abbreviation for the name of your organization or software package. Historically, people have not always followed the rule of using a namespace appropriate for their package, and this has made it difficult for determining the origin of a macro (and where to report bugs about that macro), as well as difficult for the true namespace owner to add new macros without interference from pre-existing uses of third-party macros. Perhaps the best example of this confusion is the @code{AM_GNU_GETTEXT} macro, which belongs, not to Automake, but to Gettext. Most of the Autoconf macros' names follow a structured naming convention that indicates the kind of feature check by the name. The macro names consist of several words, separated by underscores, going from most general to most specific. The names of their cache variables use the same convention (@pxref{Cache Variable Names}, for more information on them). The first word of the name after the namespace initials (such as @samp{AC_}) usually tells the category of the feature being tested. Here are the categories used in Autoconf for specific test macros, the kind of macro that you are more likely to write. They are also used for cache variables, in all-lowercase. Use them where applicable; where they're not, invent your own categories. @table @code @item C C language builtin features. @item DECL Declarations of C variables in header files. @item FUNC Functions in libraries. @item GROUP Posix group owners of files. @item HEADER Header files. @item LIB C libraries. @item PROG The base names of programs. @item MEMBER Members of aggregates. @item SYS Operating system features. @item TYPE C builtin or declared types. @item VAR C variables in libraries. @end table After the category comes the name of the particular feature being tested. Any further words in the macro name indicate particular aspects of the feature. For example, @code{AC_PROG_MAKE_SET} checks whether @command{make} sets a variable to its own name. An internal macro should have a name that starts with an underscore; Autoconf internals should therefore start with @samp{_AC_}. Additionally, a macro that is an internal subroutine of another macro should have a name that starts with an underscore and the name of that other macro, followed by one or more words saying what the internal macro does. For example, @code{AC_PATH_X} has internal macros @code{_AC_PATH_X_XMKMF} and @code{_AC_PATH_X_DIRECT}. @node Dependencies Between Macros @section Dependencies Between Macros @cindex Dependencies between macros Some Autoconf macros depend on other macros having been called first in order to work correctly. Autoconf provides a way to ensure that certain macros are called if needed and a way to warn the user if macros are called in an order that might cause incorrect operation. @menu * Prerequisite Macros:: Ensuring required information * Suggested Ordering:: Warning about possible ordering problems * One-Shot Macros:: Ensuring a macro is called only once @end menu @node Prerequisite Macros @subsection Prerequisite Macros @cindex Prerequisite macros @cindex Macros, prerequisites A macro that you write might need to use values that have previously been computed by other macros. For example, @code{AC_DECL_YYTEXT} examines the output of @code{flex} or @code{lex}, so it depends on @code{AC_PROG_LEX} having been called first to set the shell variable @code{LEX}. Rather than forcing the user of the macros to keep track of the dependencies between them, you can use the @code{AC_REQUIRE} macro to do it automatically. @code{AC_REQUIRE} can ensure that a macro is only called if it is needed, and only called once. @defmac AC_REQUIRE (@var{macro-name}) @acindex{REQUIRE} If the M4 macro @var{macro-name} has not already been called, call it (without any arguments). Make sure to quote @var{macro-name} with square brackets. @var{macro-name} must have been defined using @code{AC_DEFUN} or else contain a call to @code{AC_PROVIDE} to indicate that it has been called. @code{AC_REQUIRE} must be used inside a macro defined by @code{AC_DEFUN}; it must not be called from the top level. Also, it does not make sense to require a macro that takes parameters. @end defmac @code{AC_REQUIRE} is often misunderstood. It really implements dependencies between macros in the sense that if one macro depends upon another, the latter is expanded @emph{before} the body of the former. To be more precise, the required macro is expanded before the outermost defined macro in the current expansion stack. In particular, @samp{AC_REQUIRE([FOO])} is not replaced with the body of @code{FOO}. For instance, this definition of macros: @example @group AC_DEFUN([TRAVOLTA], [test "$body_temperature_in_celsius" -gt 38 && dance_floor=occupied]) AC_DEFUN([NEWTON_JOHN], [test "x$hair_style" = xcurly && dance_floor=occupied]) @end group @group AC_DEFUN([RESERVE_DANCE_FLOOR], [if test "x`date +%A`" = xSaturday; then AC_REQUIRE([TRAVOLTA]) AC_REQUIRE([NEWTON_JOHN]) fi]) @end group @end example @noindent with this @file{configure.ac} @example AC_INIT([Dance Manager], [1.0], [bug-dance@@example.org]) RESERVE_DANCE_FLOOR if test "x$dance_floor" = xoccupied; then AC_MSG_ERROR([cannot pick up here, let's move]) fi @end example @noindent does not leave you with a better chance to meet a kindred soul on days other than Saturday, since the call to @code{RESERVE_DANCE_FLOOR} expands to: @example @group test "$body_temperature_in_Celsius" -gt 38 && dance_floor=occupied test "x$hair_style" = xcurly && dance_floor=occupied fi if test "x`date +%A`" = xSaturday; then fi @end group @end example This behavior was chosen on purpose: (i) it prevents messages in required macros from interrupting the messages in the requiring macros; (ii) it avoids bad surprises when shell conditionals are used, as in: @example @group if @dots{}; then AC_REQUIRE([SOME_CHECK]) fi @dots{} SOME_CHECK @end group @end example However, this implementation can lead to another class of problems. Consider the case where an outer macro first expands, then indirectly requires, an inner macro: @example AC_DEFUN([TESTA], [[echo in A if test -n "$SEEN_A" ; then echo duplicate ; fi SEEN_A=:]]) AC_DEFUN([TESTB], [AC_REQUIRE([TESTA])[echo in B if test -z "$SEEN_A" ; then echo bug ; fi]]) AC_DEFUN([TESTC], [AC_REQUIRE([TESTB])[echo in C]]) AC_DEFUN([OUTER], [[echo in OUTER] TESTA TESTC]) OUTER @end example @noindent Prior to Autoconf 2.64, the implementation of @code{AC_REQUIRE} recognized that @code{TESTB} needed to be hoisted prior to the expansion of @code{OUTER}, but because @code{TESTA} had already been directly expanded, it failed to hoist @code{TESTA}. Therefore, the expansion of @code{TESTB} occurs prior to its prerequisites, leading to the following output: @example in B bug in OUTER in A in C @end example @noindent Newer Autoconf is smart enough to recognize this situation, and hoists @code{TESTA} even though it has already been expanded, but issues a syntax warning in the process. This is because the hoisted expansion of @code{TESTA} defeats the purpose of using @code{AC_REQUIRE} to avoid redundant code, and causes its own set of problems if the hoisted macro is not idempotent: @example in A in B in OUTER in A duplicate in C @end example The bug is not in Autoconf, but in the macro definitions. If you ever pass a particular macro name to @code{AC_REQUIRE}, then you are implying that the macro only needs to be expanded once. But to enforce this, either the macro must be declared with @code{AC_DEFUN_ONCE} (although this only helps in Autoconf 2.64 or newer), or all uses of that macro should be through @code{AC_REQUIRE}; directly expanding the macro defeats the point of using @code{AC_REQUIRE} to eliminate redundant expansion. In the example, this rule of thumb was violated because @code{TESTB} requires @code{TESTA} while @code{OUTER} directly expands it. One way of fixing the bug is to factor @code{TESTA} into two macros, the portion designed for direct and repeated use (here, named @code{TESTA}), and the portion designed for one-shot output and used only inside @code{AC_REQUIRE} (here, named @code{TESTA_PREREQ}). Then, by fixing all clients to use the correct calling convention according to their needs: @example AC_DEFUN([TESTA], [AC_REQUIRE([TESTA_PREREQ])[echo in A]]) AC_DEFUN([TESTA_PREREQ], [[echo in A_PREREQ if test -n "$SEEN_A" ; then echo duplicate ; fi SEEN_A=:]]) AC_DEFUN([TESTB], [AC_REQUIRE([TESTA_PREREQ])[echo in B if test -z "$SEEN_A" ; then echo bug ; fi]]) AC_DEFUN([TESTC], [AC_REQUIRE([TESTB])[echo in C]]) AC_DEFUN([OUTER], [[echo in OUTER] TESTA TESTC]) OUTER @end example @noindent the resulting output will then obey all dependency rules and avoid any syntax warnings, whether the script is built with old or new Autoconf versions: @example in A_PREREQ in B in OUTER in A in C @end example You can use the helper macros @code{AS_IF} and @code{AS_CASE} in top-level code to enforce expansion of required macros outside of shell conditional constructs; these helpers are not needed in the bodies of macros defined by @code{AC_DEFUN}. You are furthermore encouraged, although not required, to put all @code{AC_REQUIRE} calls at the beginning of a macro. You can use @code{dnl} to avoid the empty lines they leave. Autoconf will normally warn if an @code{AC_REQUIRE} call refers to a macro that has not been defined. However, the @command{aclocal} tool relies on parsing an incomplete set of input files to trace which macros have been required, in order to then pull in additional files that provide those macros; for this particular use case, pre-defining the macro @code{m4_require_silent_probe} will avoid the warnings. @node Suggested Ordering @subsection Suggested Ordering @cindex Macros, ordering @cindex Ordering macros Some macros should be run before another macro if both are called, but neither @emph{requires} that the other be called. For example, a macro that changes the behavior of the C compiler should be called before any macros that run the C compiler. Many of these dependencies are noted in the documentation. Autoconf provides the @code{AC_BEFORE} macro to warn users when macros with this kind of dependency appear out of order in a @file{configure.ac} file. The warning occurs when creating @command{configure} from @file{configure.ac}, not when running @command{configure}. For example, @code{AC_PROG_CPP} checks whether the C compiler can run the C preprocessor when given the @option{-E} option. It should therefore be called after any macros that change which C compiler is being used, such as @code{AC_PROG_CC}. So @code{AC_PROG_CC} contains: @example AC_BEFORE([$0], [AC_PROG_CPP])dnl @end example @noindent This warns the user if a call to @code{AC_PROG_CPP} has already occurred when @code{AC_PROG_CC} is called. @defmac AC_BEFORE (@var{this-macro-name}, @var{called-macro-name}) @acindex{BEFORE} Make M4 print a warning message to the standard error output if @var{called-macro-name} has already been called. @var{this-macro-name} should be the name of the macro that is calling @code{AC_BEFORE}. The macro @var{called-macro-name} must have been defined using @code{AC_DEFUN} or else contain a call to @code{AC_PROVIDE} to indicate that it has been called. @end defmac @node One-Shot Macros @subsection One-Shot Macros @cindex One-shot macros @cindex Macros, called once Some macros should be called only once, either because calling them multiple time is unsafe, or because it is bad style. For instance Autoconf ensures that @code{AC_CANONICAL_BUILD} and cousins (@pxref{Canonicalizing}) are evaluated only once, because it makes no sense to run these expensive checks more than once. Such one-shot macros can be defined using @code{AC_DEFUN_ONCE}. @defmac AC_DEFUN_ONCE (@var{macro-name}, @var{macro-body}) @acindex{DEFUN_ONCE} Declare macro @var{macro-name} like @code{AC_DEFUN} would (@pxref{Macro Definitions}), but add additional logic that guarantees that only the first use of the macro (whether by direct expansion or @code{AC_REQUIRE}) causes an expansion of @var{macro-body}; the expansion will occur before the start of any enclosing macro defined by @code{AC_DEFUN}. Subsequent expansions are silently ignored. Generally, it does not make sense for @var{macro-body} to use parameters such as @code{$1}. @end defmac Prior to Autoconf 2.64, a macro defined by @code{AC_DEFUN_ONCE} would emit a warning if it was directly expanded a second time, so for portability, it is better to use @code{AC_REQUIRE} than direct invocation of @var{macro-name} inside a macro defined by @code{AC_DEFUN} (@pxref{Prerequisite Macros}). @node Obsoleting Macros @section Obsoleting Macros @cindex Obsoleting macros @cindex Macros, obsoleting Configuration and portability technology has evolved over the years. Often better ways of solving a particular problem are developed, or ad-hoc approaches are systematized. This process has occurred in many parts of Autoconf. One result is that some of the macros are now considered @dfn{obsolete}; they still work, but are no longer considered the best thing to do, hence they should be replaced with more modern macros. Ideally, @command{autoupdate} should replace the old macro calls with their modern implementation. Autoconf provides a simple means to obsolete a macro. @anchor{AU_DEFUN} @defmac AU_DEFUN (@var{old-macro}, @var{implementation}, @ovar{message}, @ovar{silent}) @auindex{DEFUN} Define @var{old-macro} as @var{implementation}, just like @code{AC_DEFUN}, but also declare @var{old-macro} to be obsolete. When @command{autoupdate} is run, occurrences of @var{old-macro} will be replaced by the text of @var{implementation} in the updated @file{configure.ac} file. If a simple textual replacement is not enough to finish the job of updating a @file{configure.ac} to modern style, provide instructions for whatever additional manual work is required as @var{message}. These instructions will be printed by @command{autoupdate}, and embedded in the updated @file{configure.ac} file, next to the text of @var{implementation}. Normally, @command{autoconf} will also issue a warning (in the ``obsolete'' category) when it expands @var{old-macro}. This warning does not include @var{message}; it only advises the maintainer to run @command{autoupdate}. If it is inappropriate to issue this warning, set the @var{silent} argument to the word @code{silent}. One might want to use a silent @code{AU_DEFUN} when @var{old-macro} is used in a widely-distributed third-party macro. If that macro's maintainers are aware of the need to update their code, it's unnecessary to nag all of the transitive users of @var{old-macro} as well. This capability was added to @code{AU_DEFUN} in Autoconf 2.70; older versions of autoconf will ignore the @var{silent} argument and issue the warning anyway. @strong{Caution:} If @var{implementation} contains M4 or M4sugar macros, they will be evaluated when @command{autoupdate} is run, not emitted verbatim like the rest of @var{implementation}. This cannot be avoided with extra quotation, because then @var{old-macro} will not work when it is called normally. See the definition of @code{AC_FOREACH} in @file{general.m4} for a workaround. @end defmac @defmac AU_ALIAS (@var{old-name}, @var{new-name}, @ovar{silent}) @auindex{ALIAS} A shorthand version of @code{AU_DEFUN}, to be used when a macro has simply been renamed. @command{autoupdate} will replace calls to @var{old-name} with calls to @var{new-name}, keeping any arguments intact. No instructions for additional manual work will be printed. The @var{silent} argument works the same as the @var{silent} argument to @code{AU_DEFUN}. It was added to @code{AU_ALIAS} in Autoconf 2.70. @strong{Caution:} @code{AU_ALIAS} cannot be used when @var{new-name} is an M4 or M4sugar macro. See above. @end defmac @node Coding Style @section Coding Style @cindex Coding style The Autoconf macros follow a strict coding style. You are encouraged to follow this style, especially if you intend to distribute your macro, either by contributing it to Autoconf itself or the @uref{https://@/www.gnu.org/@/software/@/autoconf-archive/, Autoconf Macro Archive}, or by other means. The first requirement is to pay great attention to the quotation. For more details, see @ref{Autoconf Language}, and @ref{M4 Quotation}. Do not try to invent new interfaces. It is likely that there is a macro in Autoconf that resembles the macro you are defining: try to stick to this existing interface (order of arguments, default values, etc.). We @emph{are} conscious that some of these interfaces are not perfect; nevertheless, when harmless, homogeneity should be preferred over creativity. Be careful about clashes both between M4 symbols and between shell variables. If you stick to the suggested M4 naming scheme (@pxref{Macro Names}), you are unlikely to generate conflicts. Nevertheless, when you need to set a special value, @emph{avoid using a regular macro name}; rather, use an ``impossible'' name. For instance, up to version 2.13, the macro @code{AC_SUBST} used to remember what @var{symbol} macros were already defined by setting @code{AC_SUBST_@var{symbol}}, which is a regular macro name. But since there is a macro named @code{AC_SUBST_FILE}, it was just impossible to @samp{AC_SUBST(FILE)}! In this case, @code{AC_SUBST(@var{symbol})} or @code{_AC_SUBST(@var{symbol})} should have been used (yes, with the parentheses). @c or better yet, high-level macros such as @code{m4_expand_once} No Autoconf macro should ever enter the user-variable name space; i.e., except for the variables that are the actual result of running the macro, all shell variables should start with @code{ac_}. In addition, small macros or any macro that is likely to be embedded in other macros should be careful not to use obvious names. @cindex @code{dnl} Do not use @code{dnl} to introduce comments: most of the comments you are likely to write are either header comments which are not output anyway, or comments that should make their way into @file{configure}. There are exceptional cases where you do want to comment special M4 constructs, in which case @code{dnl} is right, but keep in mind that it is unlikely. M4 ignores the leading blanks and newlines before each argument. Use this feature to indent in such a way that arguments are (more or less) aligned with the opening parenthesis of the macro being called. For instance, instead of @example AC_CACHE_CHECK(for EMX OS/2 environment, ac_cv_emxos2, [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(, [return __EMX__;])], [ac_cv_emxos2=yes], [ac_cv_emxos2=no])]) @end example @noindent write @example AC_CACHE_CHECK([for EMX OS/2 environment], [ac_cv_emxos2], [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return __EMX__;])], [ac_cv_emxos2=yes], [ac_cv_emxos2=no])]) @end example @noindent or even @example AC_CACHE_CHECK([for EMX OS/2 environment], [ac_cv_emxos2], [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return __EMX__;])], [ac_cv_emxos2=yes], [ac_cv_emxos2=no])]) @end example When using @code{AC_RUN_IFELSE} or any macro that cannot work when cross-compiling, provide a pessimistic value (typically @samp{no}). Feel free to use various tricks to prevent auxiliary tools, such as syntax-highlighting editors, from behaving improperly. For instance, instead of: @example m4_bpatsubst([$1], [$"]) @end example @noindent use @example m4_bpatsubst([$1], [$""]) @end example @noindent so that Emacsen do not open an endless ``string'' at the first quote. For the same reasons, avoid: @example test $[#] != 0 @end example @noindent and use: @example test $[@@%:@@] != 0 @end example @noindent Otherwise, the closing bracket would be hidden inside a @samp{#}-comment, breaking the bracket-matching highlighting from Emacsen. Note the preferred style to escape from M4: @samp{$[1]}, @samp{$[@@]}, etc. Do not escape when it is unnecessary. Common examples of useless quotation are @samp{[$]$1} (write @samp{$$1}), @samp{[$]var} (use @samp{$var}), etc. If you add portability issues to the picture, you'll prefer @samp{$@{1+"$[@@]"@}} to @samp{"[$]@@"}, and you'll prefer do something better than hacking Autoconf @code{:-)}. When using @command{sed}, don't use @option{-e} except for indenting purposes. With the @code{s} and @code{y} commands, the preferred separator is @samp{/} unless @samp{/} itself might appear in the pattern or replacement, in which case you should use @samp{|}, or optionally @samp{,} if you know the pattern and replacement cannot contain a file name. If none of these characters will do, choose a printable character that cannot appear in the pattern or replacement. Characters from the set @samp{"#$&'()*;<=>?`|~} are good choices if the pattern or replacement might contain a file name, since they have special meaning to the shell and are less likely to occur in file names. @xref{Macro Definitions}, for details on how to define a macro. If a macro doesn't use @code{AC_REQUIRE}, is expected to never be the object of an @code{AC_REQUIRE} directive, and macros required by other macros inside arguments do not need to be expanded before this macro, then use @code{m4_define}. In case of doubt, use @code{AC_DEFUN}. Also take into account that public third-party macros need to use @code{AC_DEFUN} in order to be found by @command{aclocal} (@pxref{Extending aclocal,,, automake, GNU Automake}). All the @code{AC_REQUIRE} statements should be at the beginning of the macro, and each statement should be followed by @code{dnl}. You should not rely on the number of arguments: instead of checking whether an argument is missing, test that it is not empty. It provides both a simpler and a more predictable interface to the user, and saves room for further arguments. Unless the macro is short, try to leave the closing @samp{])} at the beginning of a line, followed by a comment that repeats the name of the macro being defined. This introduces an additional newline in @command{configure}; normally, that is not a problem, but if you want to remove it you can use @samp{[]dnl} on the last line. You can similarly use @samp{[]dnl} after a macro call to remove its newline. @samp{[]dnl} is recommended instead of @samp{dnl} to ensure that M4 does not interpret the @samp{dnl} as being attached to the preceding text or macro output. For example, instead of: @example AC_DEFUN([AC_PATH_X], [AC_MSG_CHECKING([for X]) AC_REQUIRE_CPP() @r{# @dots{}omitted@dots{}} AC_MSG_RESULT([libraries $x_libraries, headers $x_includes]) fi]) @end example @noindent you would write: @example AC_DEFUN([AC_PATH_X], [AC_REQUIRE_CPP()[]dnl AC_MSG_CHECKING([for X]) @r{# @dots{}omitted@dots{}} AC_MSG_RESULT([libraries $x_libraries, headers $x_includes]) fi[]dnl ])# AC_PATH_X @end example If the macro is long, try to split it into logical chunks. Typically, macros that check for a bug in a function and prepare its @code{AC_LIBOBJ} replacement should have an auxiliary macro to perform this setup. Do not hesitate to introduce auxiliary macros to factor your code. In order to highlight the recommended coding style, here is a macro written the old way: @example dnl Check for EMX on OS/2. dnl _AC_EMXOS2 AC_DEFUN(_AC_EMXOS2, [AC_CACHE_CHECK(for EMX OS/2 environment, ac_cv_emxos2, [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(, return __EMX__;)], ac_cv_emxos2=yes, ac_cv_emxos2=no)]) test "x$ac_cv_emxos2" = xyes && EMXOS2=yes]) @end example @noindent and the new way: @example # _AC_EMXOS2 # ---------- # Check for EMX on OS/2. m4_define([_AC_EMXOS2], [AC_CACHE_CHECK([for EMX OS/2 environment], [ac_cv_emxos2], [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return __EMX__;])], [ac_cv_emxos2=yes], [ac_cv_emxos2=no])]) test "x$ac_cv_emxos2" = xyes && EMXOS2=yes[]dnl ])# _AC_EMXOS2 @end example @c ============================================= Portable Shell Programming @node Portable Shell @chapter Portable Shell Programming @cindex Portable shell programming When writing your own checks, there are some shell-script programming techniques you should avoid in order to make your code portable. The Bourne shell and upward-compatible shells like the Korn shell and Bash have evolved over the years, and many features added to the original System7 shell are now supported on all interesting porting targets. However, the following discussion between Russ Allbery and Robert Lipe is worth reading: @noindent Russ Allbery: @quotation The GNU assumption that @command{/bin/sh} is the one and only shell leads to a permanent deadlock. Vendors don't want to break users' existing shell scripts, and there are some corner cases in the Bourne shell that are not completely compatible with a Posix shell. Thus, vendors who have taken this route will @emph{never} (OK@dots{}``never say never'') replace the Bourne shell (as @command{/bin/sh}) with a Posix shell. @end quotation @noindent Robert Lipe: @quotation This is exactly the problem. While most (at least most System V's) do have a Bourne shell that accepts shell functions most vendor @command{/bin/sh} programs are not the Posix shell. So while most modern systems do have a shell @emph{somewhere} that meets the Posix standard, the challenge is to find it. @end quotation For this reason, part of the job of M4sh (@pxref{Programming in M4sh}) is to find such a shell. But to prevent trouble, if you're not using M4sh you should not take advantage of features that were added after Unix version 7, circa 1977 (@pxref{Systemology}); you should not use aliases, negated character classes, or even @command{unset}. @code{#} comments, while not in Unix version 7, were retrofitted in the original Bourne shell and can be assumed to be part of the least common denominator. On the other hand, if you're using M4sh you can assume that the shell has the features that were added in SVR2 (circa 1984), including shell functions, @command{return}, @command{unset}, and I/O redirection for builtins. For more information, refer to @uref{https://@/www.in-ulm.de/@/~mascheck/@/bourne/}. However, some pitfalls have to be avoided for portable use of these constructs; these will be documented in the rest of this chapter. See in particular @ref{Shell Functions} and @ref{Limitations of Builtins, , Limitations of Shell Builtins}. Some ancient systems have quite small limits on the length of the @samp{#!} line; for instance, 32 bytes (not including the newline) on SunOS 4. However, these ancient systems are no longer of practical concern. The set of external programs you should run in a @command{configure} script is fairly small. @xref{Utilities in Makefiles, , Utilities in Makefiles, standards, The GNU Coding Standards}, for the list. This restriction allows users to start out with a fairly small set of programs and build the rest, avoiding too many interdependencies between packages. Some of these external utilities have a portable subset of features; see @ref{Limitations of Usual Tools}. There are other sources of documentation about shells. The specification for the Posix @uref{https://@/pubs.opengroup.org/@/onlinepubs/@/9699919799/@/utilities/@/V3_chap02.html, Shell Command Language}, though more generous than the restrictive shell subset described above, is fairly portable nowadays. Also please see @uref{http://@/www.faqs.org/@/faqs/@/unix-faq/@/shell/, the Shell FAQs}. @menu * Shellology:: A zoology of shells * Invoking the Shell:: Invoking the shell as a command * Here-Documents:: Quirks and tricks * File Descriptors:: FDs and redirections * Signal Handling:: Shells, signals, and headaches * File System Conventions:: File names * Shell Pattern Matching:: Pattern matching * Shell Substitutions:: Variable and command expansions * Assignments:: Varying side effects of assignments * Parentheses:: Parentheses in shell scripts * Slashes:: Slashes in shell scripts * Special Shell Variables:: Variables you should not change * Shell Functions:: What to look out for if you use them * Limitations of Builtins:: Portable use of not so portable /bin/sh * Limitations of Usual Tools:: Portable use of portable tools @end menu @node Shellology @section Shellology @cindex Shellology There are several families of shells, most prominently the Bourne family and the C shell family which are deeply incompatible. If you want to write portable shell scripts, avoid members of the C shell family. The @uref{http://@/www.faqs.org/@/faqs/@/unix-faq/@/shell/@/shell-differences/, the Shell difference FAQ} includes a small history of Posix shells, and a comparison between several of them. Below we describe some of the members of the Bourne shell family. @table @asis @item Ash @cindex Ash Ash is often used on GNU/Linux and BSD systems as a light-weight Bourne-compatible shell. Ash 0.2 has some bugs that are fixed in the 0.3.x series, but portable shell scripts should work around them, since version 0.2 is still shipped with many GNU/Linux distributions. To be compatible with Ash 0.2: @itemize @minus @item don't use @samp{$?} after expanding empty or unset variables, or at the start of an @command{eval}: @example foo= false $foo echo "Do not use it: $?" false eval 'echo "Do not use it: $?"' @end example @item don't use command substitution within variable expansion: @example cat $@{FOO=`bar`@} @end example @item beware that single builtin substitutions are not performed by a subshell, hence their effect applies to the current shell! @xref{Shell Substitutions}, item ``Command Substitution''. @end itemize @item Bash @cindex Bash To detect whether you are running Bash, test whether @code{BASH_VERSION} is set. To require Posix compatibility, run @samp{set -o posix}. @xref{Bash POSIX Mode, , Bash Posix Mode, bash, The GNU Bash Reference Manual}, for details. @item Bash 2.05 and later @cindex Bash 2.05 and later Versions 2.05 and later of Bash use a different format for the output of the @command{set} builtin, designed to make evaluating its output easier. However, this output is not compatible with earlier versions of Bash (or with many other shells, probably). So if you use Bash 2.05 or higher to execute @command{configure}, you'll need to use Bash 2.05 for all other build tasks as well. @item Ksh @cindex Ksh @cindex Korn shell @prindex @samp{ksh} @prindex @samp{ksh88} @prindex @samp{ksh93} The Korn shell is compatible with the Bourne family and it mostly conforms to Posix. It has two major variants commonly called @samp{ksh88} and @samp{ksh93}, named after the years of initial release. It is usually called @command{ksh}, but is called @command{sh} on some hosts if you set your path appropriately. On Solaris 11, @command{/bin/sh} and @command{/usr/bin/ksh} are both @samp{ksh93}. On Solaris 10 and earlier, @command{/bin/sh} is a pre-Posix Bourne shell and the Korn shell is found elsewhere: @prindex @command{/usr/bin/ksh} on Solaris @command{/usr/bin/ksh} is @samp{ksh88} on Solaris 2.0 through 10, @prindex @command{/usr/xpg4/bin/sh} on Solaris @command{/usr/xpg4/bin/sh} is a Posix-compliant variant of @samp{ksh88} on Solaris 9 and later, @prindex @command{/usr/dt/bin/dtksh} on Solaris and @command{/usr/dt/bin/dtksh} is @samp{ksh93}. Variants that are not standard may be parts of optional packages. There is no extra charge for these packages, but they are not part of a minimal OS install and therefore some installations may not have it. Starting with Tru64 Version 4.0, the Korn shell @command{/usr/bin/ksh} is also available as @command{/usr/bin/posix/sh}. If the environment variable @env{BIN_SH} is set to @code{xpg4}, subsidiary invocations of the standard shell conform to Posix. @item Pdksh @prindex @samp{pdksh} A public-domain clone of the Korn shell called @command{pdksh} is widely available: it has most of the @samp{ksh88} features along with a few of its own. It usually sets @code{KSH_VERSION}, except if invoked as @command{/bin/sh} on OpenBSD, and similarly to Bash you can require Posix compatibility by running @samp{set -o posix}. Unfortunately, with @command{pdksh} 5.2.14 (the latest stable version as of January 2007) Posix mode is buggy and causes @command{pdksh} to depart from Posix in at least one respect, see @ref{Shell Substitutions}. @item Zsh @cindex Zsh To detect whether you are running @command{zsh}, test whether @code{ZSH_VERSION} is set. By default @command{zsh} is @emph{not} compatible with the Bourne shell: you must execute @samp{emulate sh}, and for @command{zsh} versions before 3.1.6-dev-18 you must also set @code{NULLCMD} to @samp{:}. @xref{Compatibility, , Compatibility, zsh, The Z Shell Manual}, for details. The default Mac OS X @command{sh} was originally Zsh; it was changed to Bash in Mac OS X 10.2. @end table @node Invoking the Shell @section Invoking the Shell @cindex invoking the shell @cindex shell invocation The Korn shell (up to at least version M-12/28/93d) has a bug when invoked on a file whose name does not contain a slash. It first searches for the file's name in @env{PATH}, and if found it executes that rather than the original file. For example, assuming there is a binary executable @file{/usr/bin/script} in your @env{PATH}, the last command in the following example fails because the Korn shell finds @file{/usr/bin/script} and refuses to execute it as a shell script: @example $ @kbd{touch xxyzzyz script} $ @kbd{ksh xxyzzyz} $ @kbd{ksh ./script} $ @kbd{ksh script} ksh: script: cannot execute @end example Bash 2.03 has a bug when invoked with the @option{-c} option: if the option-argument ends in backslash-newline, Bash incorrectly reports a syntax error. The problem does not occur if a character follows the backslash: @example $ @kbd{$ bash -c 'echo foo \} > @kbd{'} bash: -c: line 2: syntax error: unexpected end of file $ @kbd{bash -c 'echo foo \} > @kbd{ '} foo @end example @noindent @xref{Backslash-Newline-Empty}, for how this can cause problems in makefiles. @node Here-Documents @section Here-Documents @cindex Here-documents @cindex Shell here-documents Don't rely on @samp{\} being preserved just because it has no special meaning together with the next symbol. In the native @command{sh} on OpenBSD 2.7 @samp{\"} expands to @samp{"} in here-documents with unquoted delimiter. As a general rule, if @samp{\\} expands to @samp{\} use @samp{\\} to get @samp{\}. With OpenBSD 2.7's @command{sh} @example @group $ @kbd{cat < \" \\ > EOF} " \ @end group @end example @noindent and with Bash: @example @group bash-2.04$ @kbd{cat < \" \\ > EOF} \" \ @end group @end example Using command substitutions in a here-document that is fed to a shell function is not portable. For example, with Solaris 10 @command{/bin/sh}: @example $ @kbd{kitty () @{ cat; @}} $ @kbd{kitty < `echo ok` > EOF} /tmp/sh199886: cannot open $ @kbd{echo $?} 1 @end example Some shells mishandle large here-documents: for example, Solaris 10 @command{dtksh} and the UnixWare 7.1.1 Posix shell, which are derived from Korn shell version M-12/28/93d, mishandle braced variable expansion that crosses a 1024- or 4096-byte buffer boundary within a here-document. Only the part of the variable name after the boundary is used. For example, @code{$@{variable@}} could be replaced by the expansion of @code{$@{ble@}}. If the end of the variable name is aligned with the block boundary, the shell reports an error, as if you used @code{$@{@}}. Instead of @code{$@{variable-default@}}, the shell may expand @code{$@{riable-default@}}, or even @code{$@{fault@}}. This bug can often be worked around by omitting the braces: @code{$variable}. The bug was fixed in @samp{ksh93g} (1998-04-30) but as of 2006 many operating systems were still shipping older versions with the bug. Empty here-documents are not portable either; with the following code, @command{zsh} up to at least version 4.3.10 creates a file with a single newline, whereas other shells create an empty file: @example cat >file <; then assume this and that else check this check that check something else @dots{} on and on forever @dots{} fi @end group @end example A shell parses the whole @code{if}/@code{fi} construct, creating temporary files for each here-document in it. Some shells create links for such here-documents on every @code{fork}, so that the clean-up code they had installed correctly removes them. It is creating the links that can take the shell forever. Moving the tests out of the @code{if}/@code{fi}, or creating multiple @code{if}/@code{fi} constructs, would improve the performance significantly. Anyway, this kind of construct is not exactly the typical use of Autoconf. In fact, it's even not recommended, because M4 macros can't look into shell conditionals, so we may fail to expand a macro when it was expanded before in a conditional path, and the condition turned out to be false at runtime, and we end up not executing the macro at all. Be careful with the use of @samp{<<-} to unindent here-documents. The behavior is only portable for stripping leading @key{TAB}s, and things can silently break if an overzealous editor converts to using leading spaces (not all shells are nice enough to warn about unterminated here-documents). @example $ @kbd{printf 'cat <<-x\n\t1\n\t 2\n\tx\n' | bash && echo done} 1 2 done $ @kbd{printf 'cat <<-x\n 1\n 2\n x\n' | bash-3.2 && echo done} 1 2 x done @end example @node File Descriptors @section File Descriptors @cindex Descriptors @cindex File descriptors @cindex Shell file descriptors Most shells, if not all (including Bash, Zsh, Ash), output traces on stderr, even for subshells. This might result in undesirable content if you meant to capture the standard-error output of the inner command: @example $ @kbd{ash -x -c '(eval "echo foo >&2") 2>stderr'} $ @kbd{cat stderr} + eval echo foo >&2 + echo foo foo $ @kbd{bash -x -c '(eval "echo foo >&2") 2>stderr'} $ @kbd{cat stderr} + eval 'echo foo >&2' ++ echo foo foo $ @kbd{zsh -x -c '(eval "echo foo >&2") 2>stderr'} @i{# Traces on startup files deleted here.} $ @kbd{cat stderr} +zsh:1> eval echo foo >&2 +zsh:1> echo foo foo @end example @noindent One workaround is to grep out uninteresting lines, hoping not to remove good ones. If you intend to redirect both standard error and standard output, redirect standard output first. This works better with HP-UX, since its shell mishandles tracing if standard error is redirected first: @example $ @kbd{sh -x -c ': 2>err >out'} + : + 2> err $ @kbd{cat err} 1> out @end example Don't try to redirect the standard error of a command substitution. It must be done @emph{inside} the command substitution. When running @samp{: `cd /zorglub` 2>/dev/null} expect the error message to escape, while @samp{: `cd /zorglub 2>/dev/null`} works properly. On the other hand, some shells, such as Solaris or FreeBSD @command{/bin/sh}, warn about missing programs before performing redirections. Therefore, to silently check whether a program exists, it is necessary to perform redirections on a subshell or brace group: @example $ @kbd{/bin/sh -c 'nosuch 2>/dev/null'} nosuch: not found $ @kbd{/bin/sh -c '(nosuch) 2>/dev/null'} $ @kbd{/bin/sh -c '@{ nosuch; @} 2>/dev/null'} $ @kbd{bash -c 'nosuch 2>/dev/null'} @end example FreeBSD 6.2 sh may mix the trace output lines from the statements in a shell pipeline. It is worth noting that Zsh (but not Ash nor Bash) makes it possible in assignments though: @samp{foo=`cd /zorglub` 2>/dev/null}. Some shells, like @command{ash}, don't recognize bi-directional redirection (@samp{<>}). And even on shells that recognize it, it is not portable to use on fifos: Posix does not require read-write support for named pipes, and Cygwin does not support it: @example $ @kbd{mkfifo fifo} $ @kbd{exec 5<>fifo} $ @kbd{echo hi >&5} bash: echo: write error: Communication error on send @end example @noindent Furthermore, versions of @command{dash} before 0.5.6 mistakenly truncate regular files when using @samp{<>}: @example $ @kbd{echo a > file} $ @kbd{bash -c ': 1<>file'; cat file} a $ @kbd{dash -c ': 1<>file'; cat file} $ rm a @end example Solaris 10 @code{/bin/sh} executes redirected compound commands in a subshell, while other shells don't: @example $ @kbd{/bin/sh -c 'foo=0; @{ foo=1; @} 2>/dev/null; echo $foo'} 0 $ @kbd{ksh -c 'foo=0; @{ foo=1; @} 2>/dev/null; echo $foo'} 1 $ @kbd{bash -c 'foo=0; @{ foo=1; @} 2>/dev/null; echo $foo'} 1 @end example When catering to old systems, don't redirect the same file descriptor several times, as you are doomed to failure under Ultrix. @example ULTRIX V4.4 (Rev. 69) System #31: Thu Aug 10 19:42:23 GMT 1995 UWS V4.4 (Rev. 11) $ @kbd{eval 'echo matter >fullness' >void} illegal io $ @kbd{eval '(echo matter >fullness)' >void} illegal io $ @kbd{(eval '(echo matter >fullness)') >void} Ambiguous output redirect. @end example @noindent In each case the expected result is of course @file{fullness} containing @samp{matter} and @file{void} being empty. However, this bug is probably not of practical concern to modern platforms. Solaris 10 @command{sh} will try to optimize away a @command{:} command (even if it is redirected) in a loop after the first iteration, or in a shell function after the first call: @example $ @kbd{for i in 1 2 3 ; do : >x$i; done} $ @kbd{ls x*} x1 $ @kbd{f () @{ : >$1; @}; f y1; f y2; f y3;} $ @kbd{ls y*} y1 @end example @noindent As a workaround, @command{echo} or @command{eval} can be used. Don't rely on file descriptors 0, 1, and 2 remaining closed in a subsidiary program. If any of these descriptors is closed, the operating system may open an unspecified file for the descriptor in the new process image. Posix 2008 says this may be done only if the subsidiary program is set-user-ID or set-group-ID, but HP-UX 11.23 does it even for ordinary programs, and the next version of Posix will allow HP-UX behavior. If you want a file descriptor above 2 to be inherited into a child process, then you must use redirections specific to that command or a containing subshell or command group, rather than relying on @command{exec} in the shell. In @command{ksh} as well as HP-UX @command{sh}, file descriptors above 2 which are opened using @samp{exec @var{n}>file} are closed by a subsequent @samp{exec} (such as that involved in the fork-and-exec which runs a program or script): @example $ @kbd{echo 'echo hello >&5' >k} $ @kbd{/bin/sh -c 'exec 5>t; ksh ./k; exec 5>&-; cat t} hello $ @kbd{bash -c 'exec 5>t; ksh ./k; exec 5>&-; cat t} hello $ @kbd{ksh -c 'exec 5>t; ksh ./k; exec 5>&-; cat t} ./k[1]: 5: cannot open [Bad file number] $ @kbd{ksh -c '(ksh ./k) 5>t; cat t'} hello $ @kbd{ksh -c '@{ ksh ./k; @} 5>t; cat t'} hello $ @kbd{ksh -c '5>t ksh ./k; cat t} hello @end example Don't rely on duplicating a closed file descriptor to cause an error. With Solaris 10 @command{/bin/sh}, failed duplication is silently ignored, which can cause unintended leaks to the original file descriptor. In this example, observe the leak to standard output: @example $ @kbd{bash -c 'echo hi >&3' 3>&-; echo $?} bash: 3: Bad file descriptor 1 $ @kbd{/bin/sh -c 'echo hi >&3' 3>&-; echo $?} hi 0 @end example Fortunately, an attempt to close an already closed file descriptor will portably succeed. Likewise, it is safe to use either style of @samp{@var{n}<&-} or @samp{@var{n}>&-} for closing a file descriptor, even if it doesn't match the read/write mode that the file descriptor was opened with. DOS variants cannot rename or remove open files, such as in @samp{mv foo bar >foo} or @samp{rm foo >foo}, even though this is perfectly portable among Posix hosts. A few ancient systems reserved some file descriptors. By convention, file descriptor 3 was opened to @file{/dev/tty} when you logged into Eighth Edition (1985) through Tenth Edition Unix (1989). File descriptor 4 had a special use on the Stardent/Kubota Titan (circa 1990), though we don't now remember what it was. Both these systems are obsolete, so it's now safe to treat file descriptors 3 and 4 like any other file descriptors. On the other hand, you can't portably use multi-digit file descriptors. @command{dash} and Solaris @command{ksh} don't understand any file descriptor larger than @samp{9}: @example $ @kbd{bash -c 'exec 10>&-'; echo $?} 0 $ @kbd{ksh -c 'exec 9>&-'; echo $?} 0 $ @kbd{ksh -c 'exec 10>&-'; echo $?} ksh[1]: exec: 10: not found 127 $ @kbd{dash -c 'exec 9>&-'; echo $?} 0 $ @kbd{dash -c 'exec 10>&-'; echo $?} exec: 1: 10: not found 2 @end example @c @node Signal Handling @section Signal Handling @cindex Signal handling in the shell @cindex Signals, shells and Portable handling of signals within the shell is another major source of headaches. This is worsened by the fact that various different, mutually incompatible approaches are possible in this area, each with its distinctive merits and demerits. A detailed description of these possible approaches, as well as of their pros and cons, can be found in @uref{https://www.cons.org/cracauer/sigint.html, this article}. Solaris 10 @command{/bin/sh} automatically traps most signals by default; the shell still exits with error upon termination by one of those signals, but in such a case the exit status might be somewhat unexpected (even if allowed by POSIX, strictly speaking): @c FIXME: We had a reference for this behavior but the website no longer @c exists and the page is not in the Internet Archive. --zw 2020-07-10. @example $ @kbd{bash -c 'kill -1 $$'; echo $?} # Will exit 128 + (signal number). Hangup 129 $ @kbd{/bin/ksh -c 'kill -15 $$'; echo $?} # Likewise. Terminated 143 $ @kbd{for sig in 1 2 3 15; do} > @kbd{ echo $sig:} > @kbd{ /bin/sh -c "kill -$s \$\$"; echo $?} > @kbd{done} signal 1: Hangup 129 signal 2: 208 signal 3: 208 signal 15: 208 @end example This gets even worse if one is using the POSIX ``wait'' interface to get details about the shell process terminations: it will result in the shell having exited normally, rather than by receiving a signal. @example $ @kbd{cat > foo.c <<'END'} #include /* for printf */ #include /* for system */ #include /* for WIF* macros */ int main(void) @{ int status = system ("kill -15 $$"); printf ("Terminated by signal: %s\n", WIFSIGNALED (status) ? "yes" : "no"); printf ("Exited normally: %s\n", WIFEXITED (status) ? "yes" : "no"); return 0; @} END @c $$ font-lock $ @kbd{cc -o foo foo.c} $ @kbd{./a.out} # On GNU/Linux Terminated by signal: no Exited normally: yes $ @kbd{./a.out} # On Solaris 10 Terminated by signal: yes Exited normally: no @end example Various shells seem to handle @code{SIGQUIT} specially: they ignore it even if it is not blocked, and even if the shell is not running interactively (in fact, even if the shell has no attached tty); among these shells are at least Bash (from version 2 onward), Zsh 4.3.12, Solaris 10 @code{/bin/ksh} and @code{/usr/xpg4/bin/sh}, and AT&T @code{ksh93} (2011). Still, @code{SIGQUIT} seems to be trappable quite portably within all these shells. OTOH, some other shells doesn't special-case the handling of @code{SIGQUIT}; among these shells are at least @code{pdksh} 5.2.14, Solaris 10 and NetBSD 5.1 @code{/bin/sh}, and the Almquist Shell 0.5.5.1. Some shells (especially Korn shells and derivatives) might try to propagate to themselves a signal that has killed a child process; this is not a bug, but a conscious design choice (although its overall value might be debatable). The exact details of how this is attained vary from shell to shell. For example, upon running @code{perl -e 'kill 2, $$'}, after the perl process has been interrupted, AT&T @code{ksh93} (2011) will proceed to send itself a @code{SIGINT}, while Solaris 10 @code{/bin/ksh} and @code{/usr/xpg4/bin/sh} will proceed to exit with status 130 (i.e., 128 + 2). In any case, if there is an active trap associated with @code{SIGINT}, those shells will correctly execute it. @c See: Some Korn shells, when a child process die due receiving a signal with signal number @var{n}, can leave in @samp{$?} an exit status of 256+@var{n} instead of the more common 128+@var{n}. Observe the difference between AT&T @code{ksh93} (2011) and @code{bash} 4.1.5 on Debian: @example $ @kbd{/bin/ksh -c 'sh -c "kill -1 \$\$"; echo $?'} /bin/ksh: line 1: 7837: Hangup 257 $ @kbd{/bin/bash -c 'sh -c "kill -1 \$\$"; echo $?'} /bin/bash: line 1: 7861 Hangup (sh -c "kill -1 \$\$") 129 @end example @noindent This @command{ksh} behavior is allowed by POSIX, if implemented with due care; see this @uref{https://www.austingroupbugs.net/view.php?id=51, Austin Group discussion} for more background. However, if it is not implemented with proper care, such a behavior might cause problems in some corner cases. To see why, assume we have a ``wrapper'' script like this: @example #!/bin/sh # Ignore some signals in the shell only, not in its child processes. trap : 1 2 13 15 wrapped_command "$@@" ret=$? other_command exit $ret @end example @noindent If @command{wrapped_command} is interrupted by a @code{SIGHUP} (which has signal number 1), @code{ret} will be set to 257. Unless the @command{exit} shell builtin is smart enough to understand that such a value can only have originated from a signal, and adjust the final wait status of the shell appropriately, the value 257 will just get truncated to 1 by the closing @code{exit} call, so that a caller of the script will have no way to determine that termination by a signal was involved. Observe the different behavior of AT&T @code{ksh93} (2011) and @code{bash} 4.1.5 on Debian: @example $ @kbd{cat foo.sh} #!/bin/sh sh -c 'kill -1 $$' ret=$? echo $ret exit $ret $ @kbd{/bin/ksh foo.sh; echo $?} foo.sh: line 2: 12479: Hangup 257 1 $ @kbd{/bin/bash foo.sh; echo $?} foo.sh: line 2: 12487 Hangup (sh -c 'kill -1 $$') 129 129 @end example @node File System Conventions @section File System Conventions @cindex File system conventions Autoconf uses shell-script processing extensively, so the file names that it processes should not contain characters that are special to the shell. Special characters include space, tab, newline, NUL, and the following: @example " # $ & ' ( ) * ; < = > ? [ \ ` | @end example Also, file names should not begin with @samp{~} or @samp{-}, and should contain neither @samp{-} immediately after @samp{/} nor @samp{~} immediately after @samp{:}. On Posix-like platforms, directory names should not contain @samp{:}, as this runs afoul of @samp{:} used as the path separator. These restrictions apply not only to the files that you distribute, but also to the absolute file names of your source, build, and destination directories. On some Posix-like platforms, @samp{!} and @samp{^} are special too, so they should be avoided. Posix lets implementations treat leading @file{//} specially, but requires leading @file{///} and beyond to be equivalent to @file{/}. Most Unix variants treat @file{//} like @file{/}. However, some treat @file{//} as a ``super-root'' that can provide access to files that are not otherwise reachable from @file{/}. The super-root tradition began with Apollo Domain/OS, which died out long ago, but unfortunately Cygwin has revived it. While @command{autoconf} and friends are usually run on some Posix variety, they can be used on other systems, most notably DOS variants. This impacts several assumptions regarding file names. @noindent For example, the following code: @example case $foo_dir in /*) # Absolute ;; *) foo_dir=$dots$foo_dir ;; esac @end example @noindent fails to properly detect absolute file names on those systems, because they can use a drivespec, and usually use a backslash as directory separator. If you want to be portable to DOS variants (at the price of rejecting valid but oddball Posix file names like @file{a:\b}), you can check for absolute file names like this: @cindex absolute file names, detect @example case $foo_dir in [\\/]* | ?:[\\/]* ) # Absolute ;; *) foo_dir=$dots$foo_dir ;; esac @end example @noindent Make sure you quote the brackets if appropriate and keep the backslash as first character. @xref{case, , Limitations of Shell Builtins}. Also, because the colon is used as part of a drivespec, these systems don't use it as path separator. When creating or accessing paths, you can use the @code{PATH_SEPARATOR} output variable instead. @command{configure} sets this to the appropriate value for the build system (@samp{:} or @samp{;}) when it starts up. File names need extra care as well. While DOS variants that are Posixy enough to run @command{autoconf} (such as DJGPP) are usually able to handle long file names properly, there are still limitations that can seriously break packages. Several of these issues can be easily detected by the @uref{https://@/ftp.gnu.org/@/gnu/@/non-gnu/@/doschk/@/doschk-1.1.tar.gz, doschk} package. A short overview follows; problems are marked with SFN/LFN to indicate where they apply: SFN means the issues are only relevant to plain DOS, not to DOS under Microsoft Windows variants, while LFN identifies problems that exist even under Microsoft Windows variants. @table @asis @item No multiple dots (SFN) DOS cannot handle multiple dots in file names. This is an especially important thing to remember when building a portable configure script, as @command{autoconf} uses a .in suffix for template files. This is perfectly OK on Posix variants: @example AC_CONFIG_HEADERS([config.h]) AC_CONFIG_FILES([source.c foo.bar]) AC_OUTPUT @end example @noindent but it causes problems on DOS, as it requires @samp{config.h.in}, @samp{source.c.in} and @samp{foo.bar.in}. To make your package more portable to DOS-based environments, you should use this instead: @example AC_CONFIG_HEADERS([config.h:config.hin]) AC_CONFIG_FILES([source.c:source.cin foo.bar:foobar.in]) AC_OUTPUT @end example @item No leading dot (SFN) DOS cannot handle file names that start with a dot. This is usually not important for @command{autoconf}. @item Case insensitivity (LFN) DOS is case insensitive, so you cannot, for example, have both a file called @samp{INSTALL} and a directory called @samp{install}. This also affects @command{make}; if there's a file called @samp{INSTALL} in the directory, @samp{make install} does nothing (unless the @samp{install} target is marked as PHONY). @item The 8+3 limit (SFN) Because the DOS file system only stores the first 8 characters of the file name and the first 3 of the extension, those must be unique. That means that @file{foobar-part1.c}, @file{foobar-part2.c} and @file{foobar-prettybird.c} all resolve to the same file name (@file{FOOBAR-P.C}). The same goes for @file{foo.bar} and @file{foo.bartender}. The 8+3 limit is not usually a problem under Microsoft Windows, as it uses numeric tails in the short version of file names to make them unique. However, a registry setting can turn this behavior off. While this makes it possible to share file trees containing long file names between SFN and LFN environments, it also means the above problem applies there as well. @item Invalid characters (LFN) Some characters are invalid in DOS file names, and should therefore be avoided. In a LFN environment, these are @samp{/}, @samp{\}, @samp{?}, @samp{*}, @samp{:}, @samp{<}, @samp{>}, @samp{|} and @samp{"}. In a SFN environment, other characters are also invalid. These include @samp{+}, @samp{,}, @samp{[} and @samp{]}. @item Invalid names (LFN) Some DOS file names are reserved, and cause problems if you try to use files with those names. These names include @file{CON}, @file{AUX}, @file{COM1}, @file{COM2}, @file{COM3}, @file{COM4}, @file{LPT1}, @file{LPT2}, @file{LPT3}, @file{NUL}, and @file{PRN}. File names are case insensitive, so even names like @file{aux/config.guess} are disallowed. @end table @node Shell Pattern Matching @section Shell Pattern Matching @cindex Shell pattern matching Nowadays portable patterns can use negated character classes like @samp{[!-aeiou]}. The older syntax @samp{[^-aeiou]} is supported by some shells but not others; hence portable scripts should never use @samp{^} as the first character of a bracket pattern. Outside the C locale, patterns like @samp{[a-z]} are problematic since they may match characters that are not lower-case letters. @node Shell Substitutions @section Shell Substitutions @cindex Shell substitutions Contrary to a persistent urban legend, the Bourne shell does not systematically split variables and back-quoted expressions, in particular on the right-hand side of assignments and in the argument of @code{case}. For instance, the following code: @example case "$given_srcdir" in .) top_srcdir="`echo "$dots" | sed 's|/$||'`" ;; *) top_srcdir="$dots$given_srcdir" ;; esac @end example @noindent is more readable when written as: @example case $given_srcdir in .) top_srcdir=`echo "$dots" | sed 's|/$||'` ;; *) top_srcdir=$dots$given_srcdir ;; esac @end example @noindent and in fact it is even @emph{more} portable: in the first case of the first attempt, the computation of @code{top_srcdir} is not portable, since not all shells properly understand @code{"`@dots{}"@dots{}"@dots{}`"}, for example Solaris 10 @command{ksh}: @example $ @kbd{foo="`echo " bar" | sed 's, ,,'`"} ksh: : cannot execute ksh: bar | sed 's, ,,': cannot execute @end example @noindent Posix does not specify behavior for this sequence. On the other hand, behavior for @code{"`@dots{}\"@dots{}\"@dots{}`"} is specified by Posix, but in practice, not all shells understand it the same way: pdksh 5.2.14 prints spurious quotes when in Posix mode: @example $ @kbd{echo "`echo \"hello\"`"} hello $ @kbd{set -o posix} $ @kbd{echo "`echo \"hello\"`"} "hello" @end example @noindent There is just no portable way to use double-quoted strings inside double-quoted back-quoted expressions (pfew!). Bash 4.1 has a bug where quoted empty strings adjacent to unquoted parameter expansions are elided during word splitting. Meanwhile, zsh does not perform word splitting except when in Bourne compatibility mode. In the example below, the correct behavior is to have five arguments to the function, and exactly two spaces on either side of the middle @samp{-}, since word splitting collapses multiple spaces in @samp{$f} but leaves empty arguments intact. @example $ @kbd{bash -c 'n() @{ echo "$#$@@"; @}; f=" - "; n - ""$f"" -'} 3- - - $ @kbd{ksh -c 'n() @{ echo "$#$@@"; @}; f=" - "; n - ""$f"" -'} 5- - - $ @kbd{zsh -c 'n() @{ echo "$#$@@"; @}; f=" - "; n - ""$f"" -'} 3- - - $ @kbd{zsh -c 'emulate sh;} > @kbd{n() @{ echo "$#$@@"; @}; f=" - "; n - ""$f"" -'} 5- - - @end example @noindent You can work around this by doing manual word splitting, such as using @samp{"$str" $list} rather than @samp{"$str"$list}. There are also portability pitfalls with particular expansions: @table @code @item $@@ @cindex @code{"$@@"} One of the most famous shell-portability issues is related to @samp{"$@@"}. When there are no positional arguments, Posix says that @samp{"$@@"} is supposed to be equivalent to nothing, but the original Unix version 7 Bourne shell treated it as equivalent to @samp{""} instead, and this behavior survives in later implementations like Digital Unix 5.0. The traditional way to work around this portability problem is to use @samp{$@{1+"$@@"@}}. Unfortunately this method does not work with Zsh (3.x and 4.x), which is used on Mac OS X@. When emulating the Bourne shell, Zsh performs word splitting on @samp{$@{1+"$@@"@}}: @example zsh $ @kbd{emulate sh} zsh $ @kbd{for i in "$@@"; do echo $i; done} Hello World ! zsh $ @kbd{for i in $@{1+"$@@"@}; do echo $i; done} Hello World ! @end example @noindent Zsh handles plain @samp{"$@@"} properly, but we can't use plain @samp{"$@@"} because of the portability problems mentioned above. One workaround relies on Zsh's ``global aliases'' to convert @samp{$@{1+"$@@"@}} into @samp{"$@@"} by itself: @example test $@{ZSH_VERSION+y@} && alias -g '$@{1+"$@@"@}'='"$@@"' @end example Zsh only recognizes this alias when a shell word matches it exactly; @samp{"foo"$@{1+"$@@"@}} remains subject to word splitting. Since this case always yields at least one shell word, use plain @samp{"$@@"}. A more conservative workaround is to avoid @samp{"$@@"} if it is possible that there may be no positional arguments. For example, instead of: @example cat conftest.c "$@@" @end example you can use this instead: @example case $# in 0) cat conftest.c;; *) cat conftest.c "$@@";; esac @end example Autoconf macros often use the @command{set} command to update @samp{$@@}, so if you are writing shell code intended for @command{configure} you should not assume that the value of @samp{$@@} persists for any length of time. @item $@{10@} @cindex positional parameters The 10th, 11th, @dots{} positional parameters can be accessed only after a @code{shift}. The 7th Edition shell reported an error if given @code{$@{10@}}, and Solaris 10 @command{/bin/sh} still acts that way: @example $ @kbd{set 1 2 3 4 5 6 7 8 9 10} $ @kbd{echo $@{10@}} bad substitution @end example Conversely, not all shells obey the Posix rule that when braces are omitted, multiple digits beyond a @samp{$} imply the single-digit positional parameter expansion concatenated with the remaining literal digits. To work around the issue, you must use braces. @example $ @kbd{bash -c 'set a b c d e f g h i j; echo $10 $@{1@}0'} a0 a0 $ @kbd{dash -c 'set a b c d e f g h i j; echo $10 $@{1@}0'} j a0 @end example @item $@{@var{var}:-@var{value}@} @itemx $@{@var{var}:=@var{value}@} @itemx $@{@var{var}:?@var{value}@} @itemx $@{@var{var}:+@var{value}@} @c Info cannot handle ':' in index entries. @ifnotinfo @cindex @code{$@{@var{var}:-@var{value}@}} @cindex @code{$@{@var{var}:=@var{value}@}} @cindex @code{$@{@var{var}:?@var{value}@}} @cindex @code{$@{@var{var}:+@var{value}@}} @end ifnotinfo Old BSD shells, including the Ultrix @code{sh}, don't accept the colon for any shell substitution, and complain and die. Similarly for @code{$@{@var{var}:=@var{value}@}}, @code{$@{@var{var}:?@var{value}@}}, etc. However, all shells that support functions allow the use of colon in shell substitution, and since m4sh requires functions, you can portably use null variable substitution patterns in configure scripts. @item $@{@var{var}-@var{value}@} @itemx $@{@var{var}:-@var{value}@} @itemx $@{@var{var}=@var{value}@} @itemx $@{@var{var}:=@var{value}@} @itemx $@{@var{var}?@var{value}@} @itemx $@{@var{var}:?@var{value}@} @itemx $@{@var{var}+@var{value}@} @itemx $@{@var{var}:+@var{value}@} @cindex @code{$@{@var{var}-@var{value}@}} @cindex @code{$@{@var{var}=@var{value}@}} @cindex @code{$@{@var{var}?@var{value}@}} @cindex @code{$@{@var{var}+@var{value}@}} @c Info cannot handle ':' in index entries. @ifnotinfo @cindex @code{$@{@var{var}:-@var{value}@}} @cindex @code{$@{@var{var}:=@var{value}@}} @cindex @code{$@{@var{var}:?@var{value}@}} @cindex @code{$@{@var{var}:+@var{value}@}} @end ifnotinfo When using @samp{$@{@var{var}-@var{value}@}} or similar notations that modify a parameter expansion, Posix requires that @var{value} must be a single shell word, which can contain quoted strings but cannot contain unquoted spaces. If this requirement is not met Solaris 10 @command{/bin/sh} sometimes complains, and anyway the behavior is not portable. @example $ @kbd{/bin/sh -c 'echo $@{a-b c@}'} /bin/sh: bad substitution $ @kbd{/bin/sh -c 'echo $@{a-'\''b c'\''@}'} b c $ @kbd{/bin/sh -c 'echo "$@{a-b c@}"'} b c $ @kbd{/bin/sh -c 'cat < broken} $ @kbd{echo "`printf 'foo\r\n'`"" bar" | cmp - broken} - broken differ: char 4, line 1 @end example Upon interrupt or SIGTERM, some shells may abort a command substitution, replace it with a null string, and wrongly evaluate the enclosing command before entering the trap or ending the script. This can lead to spurious errors: @example $ @kbd{sh -c 'if test `sleep 5; echo hi` = hi; then echo yes; fi'} $ @kbd{^C} sh: test: hi: unexpected operator/operand @end example @noindent You can avoid this by assigning the command substitution to a temporary variable: @example $ @kbd{sh -c 'res=`sleep 5; echo hi` if test "x$res" = xhi; then echo yes; fi'} $ @kbd{^C} @end example @item $(@var{commands}) @cindex @code{$(@var{commands})} This construct is meant to replace @samp{`@var{commands}`}, and it has most of the problems listed under @code{`@var{commands}`}. This construct can be nested while this is impossible to do portably with back quotes. Although it is almost universally supported, unfortunately Solaris 10 and earlier releases lack it: @example $ @kbd{showrev -c /bin/sh | grep version} Command version: SunOS 5.10 Generic 142251-02 Sep 2010 $ @kbd{echo $(echo blah)} syntax error: `(' unexpected @end example @noindent nor does IRIX 6.5's Bourne shell: @example $ @kbd{uname -a} IRIX firebird-image 6.5 07151432 IP22 $ @kbd{echo $(echo blah)} $(echo blah) @end example If you do use @samp{$(@var{commands})}, make sure that the commands do not start with a parenthesis, as that would cause confusion with a different notation @samp{$((@var{expression}))} that in modern shells is an arithmetic expression not a command. To avoid the confusion, insert a space between the two opening parentheses. Avoid @var{commands} that contain unbalanced parentheses in here-documents, comments, or case statement patterns, as many shells mishandle them. For example, Bash 3.1, @samp{ksh88}, @command{pdksh} 5.2.14, and Zsh 4.2.6 all mishandle the following valid command: @example echo $(case x in x) echo hello;; esac) @end example @item $((@var{expression})) @cindex @code{$((@var{expression}))} Arithmetic expansion is not portable as some shells (most notably Solaris 10 @command{/bin/sh}) don't support it. Among shells that do support @samp{$(( ))}, not all of them obey the Posix rule that octal and hexadecimal constants must be recognized: @example $ @kbd{bash -c 'echo $(( 010 + 0x10 ))'} 24 $ @kbd{zsh -c 'echo $(( 010 + 0x10 ))'} 26 $ @kbd{zsh -c 'emulate sh; echo $(( 010 + 0x10 ))'} 24 $ @kbd{pdksh -c 'echo $(( 010 + 0x10 ))'} pdksh: 010 + 0x10 : bad number `0x10' $ @kbd{pdksh -c 'echo $(( 010 ))'} 10 @end example When it is available, using arithmetic expansion provides a noticeable speedup in script execution; but testing for support requires @command{eval} to avoid syntax errors. The following construct is used by @code{AS_VAR_ARITH} to provide arithmetic computation when all arguments are provided in decimal and without a leading zero, and all operators are properly quoted and appear as distinct arguments: @example if ( eval 'test $(( 1 + 1 )) = 2' ) 2>/dev/null; then eval 'func_arith () @{ func_arith_result=$(( $* )) @}' else func_arith () @{ func_arith_result=`expr "$@@"` @} fi func_arith 1 + 1 foo=$func_arith_result @end example @item ^ @cindex @code{^} quoting Always quote @samp{^}, otherwise traditional shells such as @command{/bin/sh} on Solaris 10 treat this like @samp{|}. @end table @node Assignments @section Assignments @cindex Shell assignments When setting several variables in a row, be aware that the order of the evaluation is undefined. For instance @samp{foo=1 foo=2; echo $foo} gives @samp{1} with Solaris 10 @command{/bin/sh}, but @samp{2} with Bash. You must use @samp{;} to enforce the order: @samp{foo=1; foo=2; echo $foo}. Don't rely on the following to find @file{subdir/program}: @example PATH=subdir$PATH_SEPARATOR$PATH program @end example @noindent as this does not work with Zsh 3.0.6. Use something like this instead: @example (PATH=subdir$PATH_SEPARATOR$PATH; export PATH; exec program) @end example Don't rely on the exit status of an assignment: Ash 0.2 does not change the status and propagates that of the last statement: @example $ @kbd{false || foo=bar; echo $?} 1 $ @kbd{false || foo=`:`; echo $?} 0 @end example @noindent and to make things even worse, QNX 4.25 just sets the exit status to 0 in any case: @example $ @kbd{foo=`exit 1`; echo $?} 0 @end example To assign default values, follow this algorithm: @enumerate @item If the default value is a literal and does not contain any closing brace, use: @example : "$@{var='my literal'@}" @end example @item If the default value contains no closing brace, has to be expanded, and the variable being initialized is not intended to be IFS-split (i.e., it's not a list), then use: @example : $@{var="$default"@} @end example @item If the default value contains no closing brace, has to be expanded, and the variable being initialized is intended to be IFS-split (i.e., it's a list), then use: @example var=$@{var="$default"@} @end example @item If the default value contains a closing brace, then use: @example test $@{var+y@} || var="has a '@}'" @end example @end enumerate In most cases @samp{var=$@{var="$default"@}} is fine, but in case of doubt, just use the last form. @xref{Shell Substitutions}, items @samp{$@{@var{var}:-@var{value}@}} and @samp{$@{@var{var}=@var{value}@}} for the rationale. @node Parentheses @section Parentheses in Shell Scripts @cindex Shell parentheses Beware of two opening parentheses in a row, as many shell implementations treat them specially, and Posix says that a portable script cannot use @samp{((} outside the @samp{$((} form used for shell arithmetic. In traditional shells, @samp{((cat))} behaves like @samp{(cat)}; but many shells, including Bash and the Korn shell, treat @samp{((cat))} as an arithmetic expression equivalent to @samp{let "cat"}, and may or may not report an error when they detect that @samp{cat} is not a number. As another example, @samp{pdksh} 5.2.14 does not treat the following code as a traditional shell would: @example if ((true) || false); then echo ok fi @end example @noindent To work around this problem, insert a space between the two opening parentheses. There is a similar problem and workaround with @samp{$((}; see @ref{Shell Substitutions}. @node Slashes @section Slashes in Shell Scripts @cindex Shell slashes Unpatched Tru64 5.1 @command{sh} omits the last slash of command-line arguments that contain two trailing slashes: @example $ @kbd{echo / // /// //// .// //.} / / // /// ./ //. $ @kbd{x=//} $ @kbd{eval "echo \$x"} / $ @kbd{set -x} $ @kbd{echo abc | tr -t ab //} + echo abc + tr -t ab / /bc @end example Unpatched Tru64 4.0 @command{sh} adds a slash after @samp{"$var"} if the variable is empty and the second double-quote is followed by a word that begins and ends with slash: @example $ @kbd{sh -xc 'p=; echo "$p"/ouch/'} p= + echo //ouch/ //ouch/ @end example However, our understanding is that patches are available, so perhaps it's not worth worrying about working around these horrendous bugs. @node Special Shell Variables @section Special Shell Variables @cindex Shell variables @cindex Special shell variables Some shell variables should not be used, since they can have a deep influence on the behavior of the shell. In order to recover a sane behavior from the shell, some variables should be unset; M4sh takes care of this and provides fallback values, whenever needed, to cater for a very old @file{/bin/sh} that does not support @command{unset}. (@pxref{Portable Shell, , Portable Shell Programming}). As a general rule, shell variable names containing a lower-case letter are safe; you can define and use these variables without worrying about their effect on the underlying system, and without worrying about whether the shell changes them unexpectedly. (The exception is the shell variable @code{status}, as described below.) Here is a list of names that are known to cause trouble. This list is not exhaustive, but you should be safe if you avoid the name @code{status} and names containing only upper-case letters and underscores. @c Alphabetical order, case insensitive, `A' before `a'. @table @code @item ? Not all shells correctly reset @samp{$?} after conditionals (@pxref{if, , Limitations of Shell Builtins}). Not all shells manage @samp{$?} correctly in shell functions (@pxref{Shell Functions}) or in traps (@pxref{trap, , Limitations of Shell Builtins}). Not all shells reset @samp{$?} to zero after an empty command. @example $ @kbd{bash -c 'false; $empty; echo $?'} 0 $ @kbd{zsh -c 'false; $empty; echo $?'} 1 @end example @item _ @evindex _ Many shells reserve @samp{$_} for various purposes, e.g., the name of the last command executed. @item BIN_SH @evindex BIN_SH In Tru64, if @env{BIN_SH} is set to @code{xpg4}, subsidiary invocations of the standard shell conform to Posix. @item CDPATH @evindex CDPATH When this variable is set it specifies a list of directories to search when invoking @code{cd} with a relative file name that did not start with @samp{./} or @samp{../}. Posix 1003.1-2001 says that if a nonempty directory name from @env{CDPATH} is used successfully, @code{cd} prints the resulting absolute file name. Unfortunately this output can break idioms like @samp{abs=`cd src && pwd`} because @code{abs} receives the name twice. Also, many shells do not conform to this part of Posix; for example, @command{zsh} prints the result only if a directory name other than @file{.} was chosen from @env{CDPATH}. In practice the shells that have this problem also support @command{unset}, so you can work around the problem as follows: @example (unset CDPATH) >/dev/null 2>&1 && unset CDPATH @end example You can also avoid output by ensuring that your directory name is absolute or anchored at @samp{./}, as in @samp{abs=`cd ./src && pwd`}. Configure scripts use M4sh, which automatically unsets @env{CDPATH} if possible, so you need not worry about this problem in those scripts. @item CLICOLOR_FORCE @evindex CLICOLOR_FORCE When this variable is set, some implementations of tools like @command{ls} attempt to add color to their output via terminal escape sequences, even when the output is not directed to a terminal, and can thus cause spurious failures in scripts. Configure scripts use M4sh, which automatically unsets this variable. @item DUALCASE @evindex DUALCASE In the MKS shell, case statements and file name generation are case-insensitive unless @env{DUALCASE} is nonzero. Autoconf-generated scripts export this variable when they start up. @item ENV @itemx MAIL @itemx MAILPATH @itemx PS1 @itemx PS2 @itemx PS4 @evindex ENV @evindex MAIL @evindex MAILPATH @evindex PS1 @evindex PS2 @evindex PS4 These variables should not matter for shell scripts, since they are supposed to affect only interactive shells. However, at least one shell (the pre-3.0 UWIN Korn shell) gets confused about whether it is interactive, which means that (for example) a @env{PS1} with a side effect can unexpectedly modify @samp{$?}. To work around this bug, M4sh scripts (including @file{configure} scripts) do something like this: @example (unset ENV) >/dev/null 2>&1 && unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' @end example @noindent (actually, there is some complication due to bugs in @command{unset}; @pxref{unset, , Limitations of Shell Builtins}). @item FPATH @evindex FPATH The Korn shell uses @env{FPATH} to find shell functions, so avoid @env{FPATH} in portable scripts. @env{FPATH} is consulted after @env{PATH}, but you still need to be wary of tests that use @env{PATH} to find whether a command exists, since they might report the wrong result if @env{FPATH} is also set. @item GREP_OPTIONS @evindex GREP_OPTIONS When this variable is set, some implementations of @command{grep} honor these options, even if the options include direction to enable colored output via terminal escape sequences, and the result can cause spurious failures when the output is not directed to a terminal. Configure scripts use M4sh, which automatically unsets this variable. @item IFS @evindex IFS Long ago, shell scripts inherited @env{IFS} from the environment, but this caused many problems so modern shells ignore any environment settings for @env{IFS}. Don't set the first character of @env{IFS} to backslash. Indeed, Bourne shells use the first character (backslash) when joining the components in @samp{"$@@"} and some shells then reinterpret (!)@: the backslash escapes, so you can end up with backspace and other strange characters. The proper value for @env{IFS} (in regular code, not when performing splits) is @samp{@key{SPC}@key{TAB}@key{RET}}. The first character is especially important, as it is used to join the arguments in @samp{$*}; however, note that traditional shells, but also bash-2.04, fail to adhere to this and join with a space anyway. M4sh guarantees that @env{IFS} will have the default value at the beginning of a script, and many macros within autoconf rely on this setting. It is okay to use blocks of shell code that temporarily change the value of @env{IFS} in order to split on another character, but remember to restore it before expanding further macros. Unsetting @code{IFS} instead of resetting it to the default sequence is not suggested, since code that tries to save and restore the variable's value will incorrectly reset it to an empty value, thus disabling field splitting: @example unset IFS # default separators used for field splitting save_IFS=$IFS IFS=: # ... IFS=$save_IFS # no field splitting performed @end example @item LANG @itemx LC_ALL @itemx LC_COLLATE @itemx LC_CTYPE @itemx LC_MESSAGES @itemx LC_MONETARY @itemx LC_NUMERIC @itemx LC_TIME @evindex LANG @evindex LC_ALL @evindex LC_COLLATE @evindex LC_CTYPE @evindex LC_MESSAGES @evindex LC_MONETARY @evindex LC_NUMERIC @evindex LC_TIME You should set all these variables to @samp{C} because so much configuration code assumes the C locale and Posix requires that locale environment variables be set to @samp{C} if the C locale is desired; @file{configure} scripts and M4sh do that for you. Export these variables after setting them. @c However, some older, nonstandard @c systems (notably SCO) break if locale environment variables @c are set to @samp{C}, so when running on these systems @c Autoconf-generated scripts unset the variables instead. @item LANGUAGE @evindex LANGUAGE @env{LANGUAGE} is not specified by Posix, but it is a GNU extension that overrides @env{LC_ALL} in some cases, so you (or M4sh) should set it too. @item LC_ADDRESS @itemx LC_IDENTIFICATION @itemx LC_MEASUREMENT @itemx LC_NAME @itemx LC_PAPER @itemx LC_TELEPHONE @evindex LC_ADDRESS @evindex LC_IDENTIFICATION @evindex LC_MEASUREMENT @evindex LC_NAME @evindex LC_PAPER @evindex LC_TELEPHONE These locale environment variables are GNU extensions. They are treated like their Posix brethren (@env{LC_COLLATE}, etc.)@: as described above. @item LINENO @evindex LINENO Most modern shells provide the current line number in @code{LINENO}. Its value is the line number of the beginning of the current command. M4sh, and hence Autoconf, attempts to execute @command{configure} with a shell that supports @code{LINENO}. If no such shell is available, it attempts to implement @code{LINENO} with a Sed prepass that replaces each instance of the string @code{$LINENO} (not followed by an alphanumeric character) with the line's number. In M4sh scripts you should execute @code{AS_LINENO_PREPARE} so that these workarounds are included in your script; configure scripts do this automatically in @code{AC_INIT}. You should not rely on @code{LINENO} within @command{eval} or shell functions, as the behavior differs in practice. The presence of a quoted newline within simple commands can alter which line number is used as the starting point for @code{$LINENO} substitutions within that command. Also, the possibility of the Sed prepass means that you should not rely on @code{$LINENO} when quoted, when in here-documents, or when line continuations are used. Subshells should be OK, though. In the following example, lines 1, 9, and 14 are portable, but the other instances of @code{$LINENO} do not have deterministic values: @example @group $ @kbd{cat lineno} echo 1. $LINENO echo "2. $LINENO 3. $LINENO" cat < @kbd{ N} > @kbd{ s,$,-,} > @kbd{ t loop} > @kbd{ :loop} > @kbd{ s,^\([0-9]*\)\(.*\)[$]LINENO\([^a-zA-Z0-9_]\),\1\2\1\3,} > @kbd{ t loop} > @kbd{ s,-$,,} > @kbd{ s,^[0-9]*\n,,} > @kbd{ ' |} > @kbd{ sh} 1. 1 2. 2 3. 3 5. 5 6. 6 7. \7 9. 9 10. 10 11. 11 12. 12 13. 13 14. 14 15. 15 18. 16 18. 17 19. 20 @end group @end example In particular, note that @file{config.status} (and any other subsidiary script created by @code{AS_INIT_GENERATED}) might report line numbers relative to the parent script as a result of the potential Sed pass. @item NULLCMD @evindex NULLCMD When executing the command @samp{>foo}, @command{zsh} executes @samp{$NULLCMD >foo} unless it is operating in Bourne shell compatibility mode and the @command{zsh} version is newer than 3.1.6-dev-18. If you are using an older @command{zsh} and forget to set @env{NULLCMD}, your script might be suspended waiting for data on its standard input. @item options @evindex options For @command{zsh} 4.3.10, @env{options} is treated as an associative array even after @code{emulate sh}, so it should not be used. @item PATH_SEPARATOR @evindex PATH_SEPARATOR On DJGPP systems, the @env{PATH_SEPARATOR} environment variable can be set to either @samp{:} or @samp{;} to control the path separator Bash uses to set up certain environment variables (such as @env{PATH}). You can set this variable to @samp{;} if you want @command{configure} to use @samp{;} as a separator; this might be useful if you plan to use non-Posix shells to execute files. @xref{File System Conventions}, for more information about @code{PATH_SEPARATOR}. @item POSIXLY_CORRECT @evindex POSIXLY_CORRECT In the GNU environment, exporting @env{POSIXLY_CORRECT} with any value (even empty) causes programs to try harder to conform to Posix. Autoconf does not directly manipulate this variable, but @command{bash} ties the shell variable @env{POSIXLY_CORRECT} to whether the script is running in Posix mode. Therefore, take care when exporting or unsetting this variable, so as not to change whether @command{bash} is in Posix mode. @example $ @kbd{bash --posix -c 'set -o | grep posix} > @kbd{unset POSIXLY_CORRECT} > @kbd{set -o | grep posix'} posix on posix off @end example @item PWD @evindex PWD Posix 1003.1-2001 requires that @command{cd} and @command{pwd} must update the @env{PWD} environment variable to point to the logical name of the current directory, but traditional shells do not support this. This can cause confusion if one shell instance maintains @env{PWD} but a subsidiary and different shell does not know about @env{PWD} and executes @command{cd}; in this case @env{PWD} points to the wrong directory. Use @samp{`pwd`} rather than @samp{$PWD}. @item RANDOM @evindex RANDOM Many shells provide @code{RANDOM}, a variable that returns a different integer each time it is used. Most of the time, its value does not change when it is not used, but on IRIX 6.5 the value changes all the time. This can be observed by using @command{set}. It is common practice to use @code{$RANDOM} as part of a file name, but code shouldn't rely on @code{$RANDOM} expanding to a nonempty string. @item status @evindex status This variable is an alias to @samp{$?} for @code{zsh} (at least 3.1.6), hence read-only. Do not use it. @end table @node Shell Functions @section Shell Functions @cindex Shell Functions Nowadays, it is difficult to find a shell that does not support shell functions at all. However, some differences should be expected. When declaring a shell function, you must include whitespace between the @samp{)} after the function name and the start of the compound expression, to avoid upsetting @command{ksh}. While it is possible to use any compound command, most scripts use @samp{@{@dots{}@}}. @example $ @kbd{/bin/sh -c 'a()@{ echo hi;@}; a'} hi $ @kbd{ksh -c 'a()@{ echo hi;@}; a'} ksh: syntax error at line 1: `@}' unexpected $ @kbd{ksh -c 'a() @{ echo hi;@}; a'} hi @end example Inside a shell function, you should not rely on the error status of a subshell if the last command of that subshell was @code{exit} or @code{trap}, as this triggers bugs in zsh 4.x; while Autoconf tries to find a shell that does not exhibit the bug, zsh might be the only shell present on the user's machine. Likewise, the state of @samp{$?} is not reliable when entering a shell function. This has the effect that using a function as the first command in a @command{trap} handler can cause problems. @example $ @kbd{bash -c 'foo() @{ echo $?; @}; trap foo 0; (exit 2); exit 2'; echo $?} 2 2 $ @kbd{ash -c 'foo() @{ echo $?; @}; trap foo 0; (exit 2); exit 2'; echo $?} 0 2 @end example DJGPP bash 2.04 has a bug in that @command{return} from a shell function which also used a command substitution causes a segmentation fault. To work around the issue, you can use @command{return} from a subshell, or @samp{AS_SET_STATUS} as last command in the execution flow of the function (@pxref{Common Shell Constructs}). Not all shells treat shell functions as simple commands impacted by @samp{set -e}, for example with Solaris 10 @command{/bin/sh}: @example $ @kbd{bash -c 'f() @{ return 1; @}; set -e; f; echo oops'} $ @kbd{/bin/sh -c 'f() @{ return 1; @}; set -e; f; echo oops'} oops @end example Shell variables and functions may share the same namespace, for example with Solaris 10 @command{/bin/sh}: @example $ @kbd{f () @{ :; @}; f=; f} f: not found @end example @noindent For this reason, Autoconf (actually M4sh, @pxref{Programming in M4sh}) uses the prefix @samp{as_fn_} for its functions. Handling of positional parameters and shell options varies among shells. For example, Korn shells reset and restore trace output (@samp{set -x}) and other options upon function entry and exit. Inside a function, IRIX sh sets @samp{$0} to the function name. It is not portable to pass temporary environment variables to shell functions. Solaris 10 @command{/bin/sh} does not see the variable. Meanwhile, not all shells follow the Posix rule that the assignment must affect the current environment in the same manner as special built-ins. @example $ @kbd{/bin/sh -c 'func() @{ echo $a;@}; a=1 func; echo $a'} @result{} @result{} $ @kbd{ash -c 'func() @{ echo $a;@}; a=1 func; echo $a'} @result{}1 @result{} $ @kbd{bash -c 'set -o posix; func() @{ echo $a;@}; a=1 func; echo $a'} @result{}1 @result{}1 @end example Some ancient Bourne shell variants with function support did not reset @samp{$@var{i}, @var{i} >= 0}, upon function exit, so effectively the arguments of the script were lost after the first function invocation. It is probably not worth worrying about these shells any more. With AIX sh, a @command{trap} on 0 installed in a shell function triggers at function exit rather than at script exit. @xref{trap, , Limitations of Shell Builtins}. @node Limitations of Builtins @section Limitations of Shell Builtins @cindex Shell builtins @cindex Limitations of shell builtins No, no, we are serious: some shells do have limitations! :) You should always keep in mind that any builtin or command may support options, and therefore differ in behavior with arguments starting with a dash. For instance, even the innocent @samp{echo "$word"} can give unexpected results when @code{word} starts with a dash. It is often possible to avoid this problem using @samp{echo "x$word"}, taking the @samp{x} into account later in the pipe. Many of these limitations can be worked around using M4sh (@pxref{Programming in M4sh}). @c This table includes things like `@command{test} (files)', so we can't @c use @table @command. @table @asis @item @command{.} @c -------------- @prindex @command{.} Use @command{.} only with regular files (use @samp{test -f}). Bash 2.03, for instance, chokes on @samp{. /dev/null}. Remember that @command{.} uses @env{PATH} if its argument contains no slashes. Also, some shells, including bash 3.2, implicitly append the current directory to this @env{PATH} search, even though Posix forbids it. So if you want to use @command{.} on a file @file{foo} in the current directory, you must use @samp{. ./foo}. Not all shells gracefully handle syntax errors within a sourced file. On one extreme, some non-interactive shells abort the entire script. On the other, @command{zsh} 4.3.10 has a bug where it fails to react to the syntax error. @example $ @kbd{echo 'fi' > syntax} $ @kbd{bash -c '. ./syntax; echo $?'} ./syntax: line 1: syntax error near unexpected token `fi' ./syntax: line 1: `fi' 1 $ @kbd{ash -c '. ./syntax; echo $?'} ./syntax: 1: Syntax error: "fi" unexpected $ @kbd{zsh -c '. ./syntax; echo $?'} ./syntax:1: parse error near `fi' 0 @end example @item @command{!} @c -------------- @prindex @command{!} The Unix version 7 shell did not support negating the exit status of commands with @command{!}, and this feature is still absent from some shells (e.g., Solaris 10 @command{/bin/sh}). Other shells, such as FreeBSD @command{/bin/sh} or @command{ash}, have bugs when using @command{!}: @example $ @kbd{sh -c '! : | :'; echo $?} 1 $ @kbd{ash -c '! : | :'; echo $?} 0 $ @kbd{sh -c '! @{ :; @}'; echo $?} 1 $ @kbd{ash -c '! @{ :; @}'; echo $?} @{: not found Syntax error: "@}" unexpected 2 @end example Shell code like this: @example if ! cmp file1 file2 >/dev/null 2>&1; then echo files differ or trouble fi @end example is therefore not portable in practice. Typically it is easy to rewrite such code, e.g.: @example cmp file1 file2 >/dev/null 2>&1 || echo files differ or trouble @end example More generally, one can always rewrite @samp{! @var{command}} as: @example if @var{command}; then (exit 1); else :; fi @end example @item @command{@{...@}} @c -------------------- @prindex @command{@{...@}} Bash 3.2 (and earlier versions) sometimes does not properly set @samp{$?} when failing to write redirected output of a compound command. This problem is most commonly observed with @samp{@{@dots{}@}}; it does not occur with @samp{(@dots{})}. For example: @example $ @kbd{bash -c '@{ echo foo; @} >/bad; echo $?'} bash: line 1: /bad: Permission denied 0 $ @kbd{bash -c 'while :; do echo; done >/bad; echo $?'} bash: line 1: /bad: Permission denied 0 @end example To work around the bug, prepend @samp{:;}: @example $ @kbd{bash -c ':;@{ echo foo; @} >/bad; echo $?'} bash: line 1: /bad: Permission denied 1 @end example Posix requires a syntax error if a brace list has no contents. However, not all shells obey this rule; and on shells where empty lists are permitted, the effect on @samp{$?} is inconsistent. To avoid problems, ensure that a brace list is never empty. @example $ @kbd{bash -c 'false; @{ @}; echo $?' || echo $?} bash: line 1: syntax error near unexpected token `@}' bash: line 1: `false; @{ @}; echo $?' 2 $ @kbd{zsh -c 'false; @{ @}; echo $?' || echo $?} 1 $ @kbd{pdksh -c 'false; @{ @}; echo $?' || echo $?} 0 @end example @item @command{break} @c ------------------ @prindex @command{break} The use of @samp{break 2} etc.@: is safe. @anchor{case} @item @command{case} @c ----------------- @prindex @command{case} You don't need to quote the argument; no splitting is performed. You don't need the final @samp{;;}, but you should use it. Posix requires support for @code{case} patterns with opening parentheses like this: @example case $file_name in (*.c) echo "C source code";; esac @end example @noindent but the @code{(} in this example is not portable to a few obsolescent Bourne shell implementations, which is a pity for those of us using tools that rely on balanced parentheses. For instance, with Solaris 10 @command{/bin/sh}: @example $ @kbd{case foo in (foo) echo foo;; esac} @error{}syntax error: `(' unexpected @end example @noindent The leading @samp{(} can be omitted safely. Unfortunately, there are contexts where unbalanced parentheses cause other problems, such as when using a syntax-highlighting editor that searches for the balancing counterpart, or more importantly, when using a case statement as an underquoted argument to an Autoconf macro. @xref{Balancing Parentheses}, for trade-offs involved in various styles of dealing with unbalanced @samp{)}. Zsh handles pattern fragments derived from parameter expansions or command substitutions as though quoted: @example $ pat=\?; case aa in ?$pat) echo match;; esac $ pat=\?; case a? in ?$pat) echo match;; esac match @end example @noindent Because of a bug in its @code{fnmatch}, Bash fails to properly handle backslashes in character classes: @example bash-2.02$ @kbd{case /tmp in [/\\]*) echo OK;; esac} bash-2.02$ @end example @noindent This is extremely unfortunate, since you are likely to use this code to handle Posix or MS-DOS absolute file names. To work around this bug, always put the backslash first: @example bash-2.02$ @kbd{case '\TMP' in [\\/]*) echo OK;; esac} OK bash-2.02$ @kbd{case /tmp in [\\/]*) echo OK;; esac} OK @end example Many Bourne shells cannot handle closing brackets in character classes correctly. Some shells also have problems with backslash escaping in case you do not want to match the backslash: both a backslash and the escaped character match this pattern. To work around this, specify the character class in a variable, so that quote removal does not apply afterwards, and the special characters don't have to be backslash-escaped: @example $ @kbd{case '\' in [\<]) echo OK;; esac} OK $ @kbd{scanset='[<]'; case '\' in $scanset) echo OK;; esac} $ @end example Even with this, Solaris @command{ksh} matches a backslash if the set contains any of the characters @samp{|}, @samp{&}, @samp{(}, or @samp{)}. Conversely, Tru64 @command{ksh} (circa 2003) erroneously always matches a closing parenthesis if not specified in a character class: @example $ @kbd{case foo in *\)*) echo fail ;; esac} fail $ @kbd{case foo in *')'*) echo fail ;; esac} fail @end example Some shells, such as Ash 0.3.8, are confused by an empty @code{case}/@code{esac}: @example ash-0.3.8 $ @kbd{case foo in esac;} @error{}Syntax error: ";" unexpected (expecting ")") @end example Posix requires @command{case} to give an exit status of 0 if no cases match. However, @command{/bin/sh} in Solaris 10 does not obey this rule. Meanwhile, it is unclear whether a case that matches, but contains no statements, must also change the exit status to 0. The M4sh macro @code{AS_CASE} works around these inconsistencies. @example $ @kbd{bash -c 'case `false` in ?) ;; esac; echo $?'} 0 $ @kbd{/bin/sh -c 'case `false` in ?) ;; esac; echo $?'} 255 @end example @item @command{cd} @c --------------- @prindex @command{cd} Posix 1003.1-2001 requires that @command{cd} must support the @option{-L} (``logical'') and @option{-P} (``physical'') options, with @option{-L} being the default. However, traditional shells do not support these options, and their @command{cd} command has the @option{-P} behavior. Portable scripts should assume neither option is supported, and should assume neither behavior is the default. This can be a bit tricky, since the Posix default behavior means that, for example, @samp{ls ..} and @samp{cd ..} may refer to different directories if the current logical directory is a symbolic link. It is safe to use @code{cd @var{dir}} if @var{dir} contains no @file{..} components. Also, Autoconf-generated scripts check for this problem when computing variables like @code{ac_top_srcdir} (@pxref{Configuration Actions}), so it is safe to @command{cd} to these variables. Posix states that behavior is undefined if @command{cd} is given an explicit empty argument. Some shells do nothing, some change to the first entry in @env{CDPATH}, some change to @env{HOME}, and some exit the shell rather than returning an error. Unfortunately, this means that if @samp{$var} is empty, then @samp{cd "$var"} is less predictable than @samp{cd $var} (at least the latter is well-behaved in all shells at changing to @env{HOME}, although this is probably not what you wanted in a script). You should check that a directory name was supplied before trying to change locations. @xref{Special Shell Variables}, for portability problems involving @command{cd} and the @env{CDPATH} environment variable. Also please see the discussion of the @command{pwd} command. @anchor{echo} @item @command{echo} @c ----------------- @prindex @command{echo} The simple @command{echo} is probably the most surprising source of portability troubles. It is not possible to use @samp{echo} portably unless both options and escape sequences are omitted. Don't expect any option. Do not use backslashes in the arguments, as there is no consensus on their handling. For @samp{echo '\n' | wc -l}, the @command{sh} of Solaris 10 outputs 2, but Bash and Zsh (in @command{sh} emulation mode) output 1. The problem is truly @command{echo}: all the shells understand @samp{'\n'} as the string composed of a backslash and an @samp{n}. Within a command substitution, @samp{echo 'string\c'} will mess up the internal state of ksh88 on AIX 6.1 so that it will print the first character @samp{s} only, followed by a newline, and then entirely drop the output of the next echo in a command substitution. Because of these problems, do not pass a string containing arbitrary characters to @command{echo}. For example, @samp{echo "$foo"} is safe only if you know that @var{foo}'s value cannot contain backslashes and cannot start with @samp{-}. Normally, @command{printf} is safer and easier to use than @command{echo} and @command{echo -n}. Thus, you should use @command{printf "%s\n"} instead of @command{echo}, and similarly use @command{printf %s} instead of @command{echo -n}. Older scripts, written before @command{printf} was portable, sometimes used a here-document as a safer alternative to @command{echo}, like this: @example cat <1 | head -n1} sh: syntax error at line 1: `;' unexpected $ @kbd{make bad list='a b'} a b $ @kbd{make good} $ @kbd{make good list='a b'} a b @end example In Solaris 10 @command{/bin/sh}, when the list of arguments of a @command{for} loop starts with @emph{unquoted} tokens looking like variable assignments, the loop is not executed on those tokens: @example $ @kbd{/bin/sh -c 'for v in a=b c=d x e=f; do echo $v; done'} x e=f @end example @noindent Thankfully, quoting the assignment-like tokens, or starting the list with other tokens (including unquoted variable expansion that results in an assignment-like result), avoids the problem, so it is easy to work around: @example $ @kbd{/bin/sh -c 'for v in "a=b"; do echo $v; done'} a=b $ @kbd{/bin/sh -c 'x=a=b; for v in $x c=d; do echo $v; done'} a=b c=d @end example @anchor{if} @item @command{if} @c --------------- @prindex @command{if} Using @samp{!} is not portable. Instead of: @example if ! cmp -s file file.new; then mv file.new file fi @end example @noindent use: @example if cmp -s file file.new; then :; else mv file.new file fi @end example @noindent Or, especially if the @dfn{else} branch is short, you can use @code{||}. In M4sh, the @code{AS_IF} macro provides an easy way to write these kinds of conditionals: @example AS_IF([cmp -s file file.new], [], [mv file.new file]) @end example This is especially useful in other M4 macros, where the @dfn{then} and @dfn{else} branches might be macro arguments. Some very old shells did not reset the exit status from an @command{if} with no @command{else}: @example $ @kbd{if (exit 42); then true; fi; echo $?} 42 @end example @noindent whereas a proper shell should have printed @samp{0}. But this is no longer a portability problem; any shell that supports functions gets it correct. However, it explains why some makefiles have lengthy constructs: @example if test -f "$file"; then install "$file" "$dest" else : fi @end example @item @command{printf} @c ------------------ @prindex @command{printf} A format string starting with a @samp{-} can cause problems. Bash interprets it as an option and gives an error. And @samp{--} to mark the end of options is not good in the NetBSD Almquist shell (e.g., 0.4.6) which takes that literally as the format string. Putting the @samp{-} in a @samp{%c} or @samp{%s} is probably easiest: @example printf %s -foo @end example AIX 7.2 @command{sh} mishandles octal escapes in multi-byte locales by treating them as characters instead of bytes. For example, in a locale using the UTF-8 encoding, @samp{printf '\351'} outputs the two bytes C3, A9 (the UTF-8 encoding for U+00E9) instead of the desired single byte E9. To work around the bug, use the C locale. Bash 2.03 mishandles an escape sequence that happens to evaluate to @samp{%}: @example $ @kbd{printf '\045'} bash: printf: `%': missing format character @end example Large outputs may cause trouble. On Solaris 2.5.1 through 10, for example, @file{/usr/bin/printf} is buggy, so when using @command{/bin/sh} the command @samp{printf %010000x 123} normally dumps core. Since @command{printf} is not always a shell builtin, there is a potential speed penalty for using @code{printf '%s\n'} as a replacement for an @command{echo} that does not interpret @samp{\} or leading @samp{-}. With Solaris @command{ksh}, it is possible to use @code{print -r --} for this role instead. @xref{echo, , Limitations of Shell Builtins}, for a discussion of portable alternatives to both @command{printf} and @command{echo}. @item @command{pwd} @c ---------------- @prindex @command{pwd} With modern shells, plain @command{pwd} outputs a ``logical'' directory name, some of whose components may be symbolic links. These directory names are in contrast to ``physical'' directory names, whose components are all directories. Posix 1003.1-2001 requires that @command{pwd} must support the @option{-L} (``logical'') and @option{-P} (``physical'') options, with @option{-L} being the default. However, traditional shells do not support these options, and their @command{pwd} command has the @option{-P} behavior. Portable scripts should assume neither option is supported, and should assume neither behavior is the default. Also, on many hosts @samp{/bin/pwd} is equivalent to @samp{pwd -P}, but Posix does not require this behavior and portable scripts should not rely on it. Typically it's best to use plain @command{pwd}. On modern hosts this outputs logical directory names, which have the following advantages: @itemize @bullet @item Logical names are what the user specified. @item Physical names may not be portable from one installation host to another due to network file system gymnastics. @item On modern hosts @samp{pwd -P} may fail due to lack of permissions to some parent directory, but plain @command{pwd} cannot fail for this reason. @end itemize Also please see the discussion of the @command{cd} command. @item @command{read} @c ----------------- @prindex @command{read} No options are portable, not even support @option{-r} (Solaris 10 @command{/bin/sh} for example). Tru64/OSF 5.1 @command{sh} treats @command{read} as a special built-in, so it may exit if input is redirected from a non-existent or unreadable file. @anchor{set} @item @command{set} @c ---------------- @prindex @command{set} With the FreeBSD 6.0 shell, the @command{set} command (without any options) does not sort its output. The @command{set} builtin faces the usual problem with arguments starting with a dash. Modern shells such as Bash or Zsh understand @option{--} to specify the end of the options (any argument after @option{--} is a parameter, even @samp{-x} for instance), but many traditional shells (e.g., Solaris 10 @command{/bin/sh}) simply stop option processing as soon as a non-option argument is found. Therefore, use @samp{dummy} or simply @samp{x} to end the option processing, and use @command{shift} to pop it out: @example set x $my_list; shift @end example Avoid @samp{set -}, e.g., @samp{set - $my_list}. Posix no longer requires support for this command, and in traditional shells @samp{set - $my_list} resets the @option{-v} and @option{-x} options, which makes scripts harder to debug. Some nonstandard shells do not recognize more than one option (e.g., @samp{set -e -x} assigns @samp{-x} to the command line). It is better to combine them: @example set -ex @end example @cindex @command{set -e} The @option{-e} option has historically been under-specified, with enough ambiguities to cause numerous differences across various shell implementations; see for example @uref{https://www.in-ulm.de/@/~mascheck/@/various/@/set-e/, this overview}, or @uref{https://www.austingroupbugs.net/@/view.php?id=52, this link}, documenting a change to Posix 2008 to match @command{ksh88} behavior. Note that mixing @code{set -e} and shell functions is asking for surprises: @example set -e doit() @{ rm file echo one @} doit || echo two @end example @noindent According to the recommendation, @samp{one} should always be output regardless of whether the @command{rm} failed, because it occurs within the body of the shell function @samp{doit} invoked on the left side of @samp{||}, where the effects of @samp{set -e} are not enforced. Likewise, @samp{two} should never be printed, since the failure of @command{rm} does not abort the function, such that the status of @samp{doit} is 0. The BSD shell has had several problems with the @option{-e} option. Older versions of the BSD shell (circa 1990) mishandled @samp{&&}, @samp{||}, @samp{if}, and @samp{case} when @option{-e} was in effect, causing the shell to exit unexpectedly in some cases. This was particularly a problem with makefiles, and led to circumlocutions like @samp{sh -c 'test -f file || touch file'}, where the seemingly-unnecessary @samp{sh -c '@dots{}'} wrapper works around the bug (@pxref{Failure in Make Rules}). Even relatively-recent versions of the BSD shell (e.g., OpenBSD 3.4) wrongly exit with @option{-e} if the last command within a compound statement fails and is guarded by an @samp{&&} only. For example: @example #! /bin/sh set -e foo='' test -n "$foo" && exit 1 echo one if :; then test -n "$foo" && exit 1 echo two test -n "$foo" && exit 1 fi echo three @end example @noindent does not print @samp{three}. One workaround is to change the last instance of @samp{test -n "$foo" && exit 1} to be @samp{if test -n "$foo"; then exit 1; fi} instead. Another possibility is to warn BSD users not to use @samp{sh -e}. When @samp{set -e} is in effect, a failed command substitution in Solaris 10 @command{/bin/sh} cannot be ignored, even with @samp{||}. @example $ @kbd{/bin/sh -c 'set -e; foo=`false` || echo foo; echo bar'} $ @kbd{bash -c 'set -e; foo=`false` || echo foo; echo bar'} foo bar @end example @noindent Moreover, a command substitution, successful or not, causes this shell to exit from a failing outer command even in presence of an @samp{&&} list: @example $ @kbd{bash -c 'set -e; false `true` && echo notreached; echo ok'} ok $ @kbd{sh -c 'set -e; false `true` && echo notreached; echo ok'} $ @end example Portable scripts should not use @samp{set -e} if @command{trap} is used to install an exit handler. This is because Tru64/OSF 5.1 @command{sh} sometimes enters the trap handler with the exit status of the command prior to the one that triggered the errexit handler: @example $ @kbd{sh -ec 'trap '\''echo $?'\'' 0; false'} 0 $ @kbd{sh -c 'set -e; trap '\''echo $?'\'' 0; false'} 1 @end example @noindent Thus, when writing a script in M4sh, rather than trying to rely on @samp{set -e}, it is better to append @samp{|| AS_EXIT} to any statement where it is desirable to abort on failure. @cindex @command{set -b} @cindex @command{set -m} Job control is not provided by all shells, so the use of @samp{set -m} or @samp{set -b} must be done with care. When using @command{zsh} in native mode, asynchronous notification (@samp{set -b}) is enabled by default, and using @samp{emulate sh} to switch to Posix mode does not clear this setting (although asynchronous notification has no impact unless job monitoring is also enabled). Also, @command{zsh} 4.3.10 and earlier have a bug where job control can be manipulated in interactive shells, but not in subshells or scripts. Furthermore, some shells, like @command{pdksh}, fail to treat subshells as interactive, even though the parent shell was. @example $ @kbd{echo $ZSH_VERSION} 4.3.10 $ @kbd{set -m; echo $?} 0 $ @kbd{zsh -c 'set -m; echo $?'} set: can't change option: -m $ @kbd{(set -m); echo $?} set: can't change option: -m 1 $ @kbd{pdksh -ci 'echo $-; (echo $-)'} cim c @end example @cindex @command{set -n} Use of @command{set -n} (typically via @command{sh -n script}) to validate a script is not foolproof. Modern @command{ksh93} tries to be helpful by informing you about better syntax, but switching the script to use the suggested syntax in order to silence the warnings would render the script no longer portable to older shells: @example $ @kbd{ksh -nc '``'} ksh: warning: line 1: `...` obsolete, use $(...) 0 @end example Furthermore, on ancient hosts, such as SunOS 4, @command{sh -n} could go into an infinite loop; even with that bug fixed, Solaris 8 @command{/bin/sh} takes extremely long to parse large scripts. Autoconf itself uses @command{sh -n} within its testsuite to check that correct scripts were generated, but only after first probing for other shell features (such as @code{test $@{BASH_VERSION+y@}}) that indicate a reasonably fast and working implementation. @item @command{shift} @c ------------------ @prindex @command{shift} Not only is @command{shift}ing a bad idea when there is nothing left to shift, but in addition it is not portable: the shell of MIPS RISC/OS 4.52 refuses to do it. Don't use @samp{shift 2} etc.; while it in the SVR1 shell (1983), it is also absent in many pre-Posix shells. @item @command{source} @c ------------------- @prindex @command{source} This command is not portable, as Posix does not require it; use @command{.} instead. @item @command{test} @c ----------------- @prindex @command{test} The @code{test} program is the way to perform many file and string tests. It is often invoked by the alternate name @samp{[}, but using that name in Autoconf code is asking for trouble since it is an M4 quote character. The @option{-a}, @option{-o}, @samp{(}, and @samp{)} operands are not present in all implementations, and have been marked obsolete by Posix 2008. This is because there are inherent ambiguities in using them. For example, @samp{test "$1" -a "$2"} looks like a binary operator to check whether two strings are both non-empty, but if @samp{$1} is the literal @samp{!}, then some implementations of @command{test} treat it as a negation of the unary operator @option{-a}. Thus, portable uses of @command{test} should never have more than four arguments, and scripts should use shell constructs like @samp{&&} and @samp{||} instead. If you combine @samp{&&} and @samp{||} in the same statement, keep in mind that they have equal precedence, so it is often better to parenthesize even when this is redundant. For example: @smallexample # Not portable: test "X$a" = "X$b" -a \ '(' "X$c" != "X$d" -o "X$e" = "X$f" ')' # Portable: test "X$a" = "X$b" && @{ test "X$c" != "X$d" || test "X$e" = "X$f"; @} @end smallexample @command{test} does not process options like most other commands do; for example, it does not recognize the @option{--} argument as marking the end of options. It is safe to use @samp{!} as a @command{test} operator. For example, @samp{if test ! -d foo; @dots{}} is portable even though @samp{if ! test -d foo; @dots{}} is not. @item @command{test} (files) @c ------------------------- To enable @command{configure} scripts to support cross-compilation, they shouldn't do anything that tests features of the build system instead of the host system. But occasionally you may find it necessary to check whether some arbitrary file exists. To do so, use @samp{test -f}, @samp{test -r}, or @samp{test -x}. Do not use @samp{test -e}, because Solaris 10 @command{/bin/sh} lacks it. To test for symbolic links on systems that have them, use @samp{test -h} rather than @samp{test -L}; either form conforms to Posix 1003.1-2001, but older shells like Solaris 8 @code{/bin/sh} support only @option{-h}. For historical reasons, Posix reluctantly allows implementations of @samp{test -x} that will succeed for the root user, even if no execute permissions are present. Furthermore, shells do not all agree on whether Access Control Lists should affect @samp{test -r}, @samp{test -w}, and @samp{test -x}; some shells base test results strictly on the current user id compared to file owner and mode, as if by @code{stat(2)}; while other shells base test results on whether the current user has the given right, even if that right is only granted by an ACL, as if by @code{faccessat(2)}. Furthermore, there is a classic time of check to time of use race between any use of @command{test} followed by operating on the just-checked file. Therefore, it is a good idea to write scripts that actually attempt an operation, and are prepared for the resulting failure if permission is denied, rather than trying to avoid an operation based solely on whether @command{test} guessed that it might not be permitted. @item @command{test} (strings) @c --------------------------- Posix says that @samp{test "@var{string}"} succeeds if @var{string} is not null, but this usage is not portable to traditional platforms like Solaris 10 @command{/bin/sh}, which mishandle strings like @samp{!} and @samp{-n}. However, it @emph{is} portable to test if a variable is set to a non-empty value, by using @samp{test $@{var+y@}}, since all known implementations properly distinguish between no arguments and a known-safe string of @samp{y}. Posix also says that @samp{test ! "@var{string}"}, @samp{test -n "@var{string}"} and @samp{test -z "@var{string}"} work with any string, but many shells (such as Solaris 10, AIX 3.2, UNICOS 10.0.0.6, Digital Unix 4, etc.)@: get confused if @var{string} looks like an operator: @example $ @kbd{test -n =} test: argument expected $ @kbd{test ! -n} test: argument expected $ @kbd{test -z ")"; echo $?} 0 @end example Similarly, Posix says that both @samp{test "@var{string1}" = "@var{string2"}} and @samp{test "@var{string1}" != "@var{string2"}} work for any pairs of strings, but in practice this is not true for troublesome strings that look like operators or parentheses, or that begin with @samp{-}. It is best to protect such strings with a leading @samp{X}, e.g., @samp{test "X@var{string}" != X} rather than @samp{test -n "@var{string}"} or @samp{test ! "@var{string}"}. It is common to find variations of the following idiom: @example test -n "`echo $ac_feature | sed 's/[-a-zA-Z0-9_]//g'`" && @var{action} @end example @noindent to take an action when a token matches a given pattern. Such constructs should be avoided by using: @example case $ac_feature in *[!-a-zA-Z0-9_]*) @var{action};; esac @end example If the pattern is a complicated regular expression that cannot be expressed as a shell pattern, use something like this instead: @example expr "X$ac_feature" : 'X.*[^-a-zA-Z0-9_]' >/dev/null && @var{action} @end example @samp{expr "X@var{foo}" : "X@var{bar}"} is more robust than @samp{echo "X@var{foo}" | grep "^X@var{bar}"}, because it avoids problems when @samp{@var{foo}} contains backslashes. @anchor{trap} @item @command{trap} @c ----------------- @prindex @command{trap} It is safe to trap at least the signals 1, 2, 13, and 15. You can also trap 0, i.e., have the @command{trap} run when the script ends (either via an explicit @command{exit}, or the end of the script). The trap for 0 should be installed outside of a shell function, or AIX 5.3 @command{/bin/sh} will invoke the trap at the end of this function. Posix says that @samp{trap - 1 2 13 15} resets the traps for the specified signals to their default values, but many common shells (e.g., Solaris 10 @command{/bin/sh}) misinterpret this and attempt to execute a ``command'' named @command{-} when the specified conditions arise. Posix 2008 also added a requirement to support @samp{trap 1 2 13 15} to reset traps, as this is supported by a larger set of shells, but there are still shells like @command{dash} that mistakenly try to execute @command{1} instead of resetting the traps. Therefore, there is no portable workaround, except for @samp{trap - 0}, for which @samp{trap '' 0} is a portable substitute. Although Posix is not absolutely clear on this point, it is widely admitted that when entering the trap @samp{$?} should be set to the exit status of the last command run before the trap. The ambiguity can be summarized as: ``when the trap is launched by an @command{exit}, what is the @emph{last} command run: that before @command{exit}, or @command{exit} itself?'' Bash considers @command{exit} to be the last command, while Zsh and Solaris 10 @command{/bin/sh} consider that when the trap is run it is @emph{still} in the @command{exit}, hence it is the previous exit status that the trap receives: @example $ @kbd{cat trap.sh} trap 'echo $?' 0 (exit 42); exit 0 $ @kbd{zsh trap.sh} 42 $ @kbd{bash trap.sh} 0 @end example The portable solution is then simple: when you want to @samp{exit 42}, run @samp{(exit 42); exit 42}, the first @command{exit} being used to set the exit status to 42 for Zsh, and the second to trigger the trap and pass 42 as exit status for Bash. In M4sh, this is covered by using @code{AS_EXIT}. The shell in FreeBSD 4.0 has the following bug: @samp{$?} is reset to 0 by empty lines if the code is inside @command{trap}. @example $ @kbd{trap 'false} echo $?' 0 $ @kbd{exit} 0 @end example @noindent Fortunately, this bug only affects @command{trap}. Several shells fail to execute an exit trap that is defined inside a subshell, when the last command of that subshell is not a builtin. A workaround is to use @samp{exit $?} as the shell builtin. @example $ @kbd{bash -c '(trap "echo hi" 0; /bin/true)'} hi $ @kbd{/bin/sh -c '(trap "echo hi" 0; /bin/true)'} $ @kbd{/bin/sh -c '(trap "echo hi" 0; /bin/true; exit $?)'} hi @end example @noindent Likewise, older implementations of @command{bash} failed to preserve @samp{$?} across an exit trap consisting of a single cleanup command. @example $ @kbd{bash -c 'trap "/bin/true" 0; exit 2'; echo $?} 2 $ @kbd{bash-2.05b -c 'trap "/bin/true" 0; exit 2'; echo $?} 0 $ @kbd{bash-2.05b -c 'trap ":; /bin/true" 0; exit 2'; echo $?} 2 @end example Be aware that a trap can be called from any number of places in your script, and therefore the trap handler should not make assumptions about shell state. For some examples, if your script temporarily modifies @env{IFS}, then the trap should include an initialization back to its typical value of space-tab-newline (autoconf does this for generated @file{configure} files). Likewise, if your script changes the current working directory at some point after the trap is installed, then your trap cannot assume which directory it is in, and should begin by changing directories to an absolute path if that is important to the cleanup efforts (autotest does this for generated @file{testsuite} files). @item @command{true} @c ----------------- @prindex @command{true} @c Info cannot handle `:' in index entries. @c @prindex @command{:} Don't worry: as far as we know @command{true} is portable. Nevertheless, it's not always a builtin (e.g., Bash 1.x), and the portable shell community tends to prefer using @command{:}. This has a funny side effect: when asked whether @command{false} is more portable than @command{true} Alexandre Oliva answered: @quotation In a sense, yes, because if it doesn't exist, the shell will produce an exit status of failure, which is correct for @command{false}, but not for @command{true}. @end quotation Remember that even though @samp{:} ignores its arguments, it still takes time to compute those arguments. It is a good idea to use double quotes around any arguments to @samp{:} to avoid time spent in field splitting and file name expansion. @anchor{unset} @item @command{unset} @c ------------------ @prindex @command{unset} In some nonconforming shells (e.g., Solaris 10 @command{/bin/ksh} and @command{/usr/xpg4/bin/sh}, NetBSD 5.99.43 sh, or Bash 2.05a), @code{unset FOO} fails when @code{FOO} is not set. This can interfere with @code{set -e} operation. You can use @smallexample FOO=; unset FOO @end smallexample @noindent if you are not sure that @code{FOO} is set. A few ancient shells lack @command{unset} entirely. For some variables such as @code{PS1}, you can use a neutralizing value instead: @smallexample PS1='$ ' @end smallexample Usually, shells that do not support @command{unset} need less effort to make the environment sane, so for example is not a problem if you cannot unset @command{CDPATH} on those shells. However, Bash 2.01 mishandles @code{unset MAIL} and @code{unset MAILPATH} in some cases and dumps core. So, you should do something like @smallexample ( (unset MAIL) || exit 1) >/dev/null 2>&1 && unset MAIL || : @end smallexample @noindent @xref{Special Shell Variables}, for some neutralizing values. Also, see @ref{export, , Limitations of Builtins}, for the case of environment variables. @item @command{wait} @c ----------------- @prindex @command{wait} The exit status of @command{wait} is not always reliable. @end table @node Limitations of Usual Tools @section Limitations of Usual Tools @cindex Limitations of usual tools The small set of tools you can expect to find on any machine can still include some limitations you should be aware of. @comment Between this list and the list of builtins above, we should @comment mention all the tools in GNU Coding Standards ``Utilities in @comment Makefiles''. @c This table includes things like `@command{expr} (|)', so we can't @c use @table @command. @table @asis @anchor{awk} @item @command{awk} @c ---------------- @prindex @command{awk} Don't leave white space before the opening parenthesis in a user function call. Posix does not allow this and GNU Awk rejects it: @example $ @kbd{gawk 'function die () @{ print "Aaaaarg!" @} BEGIN @{ die () @}'} gawk: cmd. line:2: BEGIN @{ die () @} gawk: cmd. line:2: ^ parse error $ @kbd{gawk 'function die () @{ print "Aaaaarg!" @} BEGIN @{ die() @}'} Aaaaarg! @end example Posix says that if a program contains only @samp{BEGIN} actions, and contains no instances of @code{getline}, then the program merely executes the actions without reading input. However, traditional Awk implementations (such as Solaris 10 @command{awk}) read and discard input in this case. Portable scripts can redirect input from @file{/dev/null} to work around the problem. For example: @example awk 'BEGIN @{print "hello world"@}' printf "foo\n|foo\n" | $EGREP '^(|foo|bar)$' |foo > printf "bar\nbar|\n" | $EGREP '^(foo|bar|)$' bar| > printf "foo\nfoo|\n|bar\nbar\n" | $EGREP '^(foo||bar)$' foo |bar @end example @command{$EGREP} also suffers the limitations of @command{grep} (@pxref{grep, , Limitations of Usual Tools}). @item @command{expr} @c ----------------- @prindex @command{expr} Not all implementations obey the Posix rule that @samp{--} separates options from arguments; likewise, not all implementations provide the extension to Posix that the first argument can be treated as part of a valid expression rather than an invalid option if it begins with @samp{-}. When performing arithmetic, use @samp{expr 0 + $var} if @samp{$var} might be a negative number, to keep @command{expr} from interpreting it as an option. No @command{expr} keyword starts with @samp{X}, so use @samp{expr X"@var{word}" : 'X@var{regex}'} to keep @command{expr} from misinterpreting @var{word}. Don't use @code{length}, @code{substr}, @code{match} and @code{index}. @item @command{expr} (@samp{|}) @prindex @command{expr} (@samp{|}) You can use @samp{|}. Although Posix does require that @samp{expr ''} return the empty string, it does not specify the result when you @samp{|} together the empty string (or zero) with the empty string. For example: @example expr '' \| '' @end example Posix 1003.2-1992 returns the empty string for this case, but traditional Unix returns @samp{0} (Solaris is one such example). In Posix 1003.1-2001, the specification was changed to match traditional Unix's behavior (which is bizarre, but it's too late to fix this). Please note that the same problem does arise when the empty string results from a computation, as in: @example expr bar : foo \| foo : bar @end example @noindent Avoid this portability problem by avoiding the empty string. @item @command{expr} (@samp{:}) @c ---------------------------- @prindex @command{expr} Portable @command{expr} regular expressions should use @samp{\} to escape only characters in the string @samp{$()*.0123456789[\^n@{@}}. For example, alternation, @samp{\|}, is common but Posix does not require its support, so it should be avoided in portable scripts. Similarly, @samp{\+} and @samp{\?} should be avoided. Portable @command{expr} regular expressions should not begin with @samp{^}. Patterns are automatically anchored so leading @samp{^} is not needed anyway. On the other hand, the behavior of the @samp{$} anchor is not portable on multi-line strings. Posix is ambiguous whether the anchor applies to each line, as was done in older versions of the GNU Core Utilities, or whether it applies only to the end of the overall string, as in Coreutils 6.0 and most other implementations. @example $ @kbd{baz='foo} > @kbd{bar'} $ @kbd{expr "X$baz" : 'X\(foo\)$'} $ @kbd{expr-5.97 "X$baz" : 'X\(foo\)$'} foo @end example The Posix standard is ambiguous as to whether @samp{expr 'a' : '\(b\)'} outputs @samp{0} or the empty string. In practice, it outputs the empty string on most platforms, but portable scripts should not assume this. For instance, the QNX 4.25 native @command{expr} returns @samp{0}. One might think that a way to get a uniform behavior would be to use the empty string as a default value: @example expr a : '\(b\)' \| '' @end example @noindent Unfortunately this behaves exactly as the original expression; see the @command{expr} (@samp{|}) entry for more information. Some ancient @command{expr} implementations (e.g., SunOS 4 @command{expr} and Solaris 8 @command{/usr/ucb/expr}) have a silly length limit that causes @command{expr} to fail if the matched substring is longer than 120 bytes. In this case, you might want to fall back on @samp{echo|sed} if @command{expr} fails. Nowadays this is of practical importance only for the rare installer who mistakenly puts @file{/usr/ucb} before @file{/usr/bin} in @env{PATH}. On Mac OS X 10.4, @command{expr} mishandles the pattern @samp{[^-]} in some cases. For example, the command @example expr Xpowerpc-apple-darwin8.1.0 : 'X[^-]*-[^-]*-\(.*\)' @end example @noindent outputs @samp{apple-darwin8.1.0} rather than the correct @samp{darwin8.1.0}. This particular case can be worked around by substituting @samp{[^--]} for @samp{[^-]}. Don't leave, there is some more! The QNX 4.25 @command{expr}, in addition of preferring @samp{0} to the empty string, has a funny behavior in its exit status: it's always 1 when parentheses are used! @example $ @kbd{val=`expr 'a' : 'a'`; echo "$?: $val"} 0: 1 $ @kbd{val=`expr 'a' : 'b'`; echo "$?: $val"} 1: 0 $ @kbd{val=`expr 'a' : '\(a\)'`; echo "?: $val"} 1: a $ @kbd{val=`expr 'a' : '\(b\)'`; echo "?: $val"} 1: 0 @end example @noindent In practice this can be a big problem if you are ready to catch failures of @command{expr} programs with some other method (such as using @command{sed}), since you may get twice the result. For instance @example $ @kbd{expr 'a' : '\(a\)' || echo 'a' | sed 's/^\(a\)$/\1/'} @end example @noindent outputs @samp{a} on most hosts, but @samp{aa} on QNX 4.25. A simple workaround consists of testing @command{expr} and using a variable set to @command{expr} or to @command{false} according to the result. Tru64 @command{expr} incorrectly treats the result as a number, if it can be interpreted that way: @example $ @kbd{expr 00001 : '.*\(...\)'} 1 @end example On HP-UX 11, @command{expr} only supports a single sub-expression. @example $ @kbd{expr 'Xfoo' : 'X\(f\(oo\)*\)$'} expr: More than one '\(' was used. @end example @item @command{fgrep} @c ------------------ @prindex @command{fgrep} Posix 1003.1-2001 no longer requires @command{fgrep}, but many hosts do not yet support the Posix replacement @code{grep -F}. Also, some traditional implementations do not work on long input lines. To work around these problems, invoke @code{AC_PROG_FGREP} and then use @code{$FGREP}. Tru64/OSF 5.1 @command{fgrep} does not match an empty pattern. @item @command{find} @c ----------------- @prindex @command{find} The @option{-maxdepth} option seems to be GNU specific. Tru64 v5.1, NetBSD 1.5 and Solaris @command{find} commands do not understand it. The replacement of @samp{@{@}} is guaranteed only if the argument is exactly @emph{@{@}}, not if it's only a part of an argument. For instance on DU, and HP-UX 10.20 and HP-UX 11: @example $ @kbd{touch foo} $ @kbd{find . -name foo -exec echo "@{@}-@{@}" \;} @{@}-@{@} @end example @noindent while GNU @command{find} reports @samp{./foo-./foo}. @anchor{grep} @item @command{grep} @c ----------------- @prindex @command{grep} Portable scripts can rely on the @command{grep} options @option{-c}, @option{-l}, @option{-n}, and @option{-v}, but should avoid other options. For example, don't use @option{-w}, as Posix does not require it and Irix 6.5.16m's @command{grep} does not support it. Also, portable scripts should not combine @option{-c} with @option{-l}, as Posix does not allow this. Some of the options required by Posix are not portable in practice. Don't use @samp{grep -q} to suppress output, because many @command{grep} implementations (e.g., Solaris) do not support @option{-q}. Don't use @samp{grep -s} to suppress output either, because Posix says @option{-s} does not suppress output, only some error messages; also, the @option{-s} option of traditional @command{grep} behaved like @option{-q} does in most modern implementations. Instead, redirect the standard output and standard error (in case the file doesn't exist) of @code{grep} to @file{/dev/null}. Check the exit status of @code{grep} to determine whether it found a match. The QNX4 implementation fails to count lines with @code{grep -c '$'}, but works with @code{grep -c '^'}. Other alternatives for counting lines are to use @code{sed -n '$='} or @code{wc -l}. Some traditional @command{grep} implementations do not work on long input lines. On AIX the default @code{grep} silently truncates long lines on the input before matching. Also, many implementations do not support multiple regexps with @option{-e}: they either reject @option{-e} entirely (e.g., Solaris) or honor only the last pattern (e.g., IRIX 6.5 and NeXT). To work around these problems, invoke @code{AC_PROG_GREP} and then use @code{$GREP}. Another possible workaround for the multiple @option{-e} problem is to separate the patterns by newlines, for example: @example grep 'foo bar' in.txt @end example @noindent except that this fails with traditional @command{grep} implementations and with OpenBSD 3.8 @command{grep}. Traditional @command{grep} implementations (e.g., Solaris) do not support the @option{-E} or @option{-F} options. To work around these problems, invoke @code{AC_PROG_EGREP} and then use @code{$EGREP}, and similarly for @code{AC_PROG_FGREP} and @code{$FGREP}. Even if you are willing to require support for Posix @command{grep}, your script should not use both @option{-E} and @option{-F}, since Posix does not allow this combination. Portable @command{grep} regular expressions should use @samp{\} only to escape characters in the string @samp{$()*.0123456789[\^@{@}}. For example, alternation, @samp{\|}, is common but Posix does not require its support in basic regular expressions, so it should be avoided in portable scripts. Solaris and HP-UX @command{grep} do not support it. Similarly, the following escape sequences should also be avoided: @samp{\<}, @samp{\>}, @samp{\+}, @samp{\?}, @samp{\`}, @samp{\'}, @samp{\B}, @samp{\b}, @samp{\S}, @samp{\s}, @samp{\W}, and @samp{\w}. Posix does not specify the behavior of @command{grep} on binary files. An example where this matters is using BSD @command{grep} to search text that includes embedded ANSI escape sequences for colored output to terminals (@samp{\033[m} is the sequence to restore normal output); the behavior depends on whether input is seekable: @example $ @kbd{printf 'esc\033[mape\n' > sample} $ @kbd{grep . sample} Binary file sample matches $ @kbd{cat sample | grep .} escape @end example @item @command{join} @c ----------------- @prindex @command{join} Solaris 8 @command{join} has bugs when the second operand is standard input, and when standard input is a pipe. For example, the following shell script causes Solaris 8 @command{join} to loop forever: @example cat >file <<'EOF' 1 x 2 y EOF cat file | join file - @end example Use @samp{join - file} instead. On NetBSD, @command{join -a 1 file1 file2} mistakenly behaves like @command{join -a 1 -a 2 1 file1 file2}, resulting in a usage warning; the workaround is to use @command{join -a1 file1 file2} instead. @item @command{ln} @c --------------- @prindex @command{ln} The @option{-f} option is portable nowadays. @cindex Symbolic links Symbolic links are not available on some systems; use @samp{$(LN_S)} as a portable substitute. For versions of the DJGPP before 2.04, @command{ln} emulates symbolic links to executables by generating a stub that in turn calls the real program. This feature also works with nonexistent files like in the Posix spec. So @samp{ln -s file link} generates @file{link.exe}, which attempts to call @file{file.exe} if run. But this feature only works for executables, so @samp{cp -p} is used instead for these systems. DJGPP versions 2.04 and later have full support for symbolic links. @item @command{ls} @c --------------- @prindex @command{ls} @cindex Listing directories The portable options are @option{-acdilrtu}. Current practice is for @option{-l} to output both owner and group, even though ancient versions of @command{ls} omitted the group. On ancient hosts, @samp{ls foo} sent the diagnostic @samp{foo not found} to standard output if @file{foo} did not exist. Hence a shell command like @samp{sources=`ls *.c 2>/dev/null`} did not always work, since it was equivalent to @samp{sources='*.c not found'} in the absence of @samp{.c} files. This is no longer a practical problem, since current @command{ls} implementations send diagnostics to standard error. The behavior of @command{ls} on a directory that is being concurrently modified is not always predictable, because of a data race where cached information returned by @code{readdir} does not match the current directory state. In fact, MacOS 10.5 has an intermittent bug where @code{readdir}, and thus @command{ls}, sometimes lists a file more than once if other files were added or removed from the directory immediately prior to the @command{ls} call. Since @command{ls} already sorts its output, the duplicate entries can be avoided by piping the results through @code{uniq}. @anchor{mkdir} @item @command{mkdir} @c ------------------ @prindex @command{mkdir} @cindex Making directories No @command{mkdir} option is portable to older systems. Instead of @samp{mkdir -p @var{file-name}}, you should use @code{AS_MKDIR_P(@var{file-name})} (@pxref{Programming in M4sh}) or @code{AC_PROG_MKDIR_P} (@pxref{Particular Programs}). Combining the @option{-m} and @option{-p} options, as in @samp{mkdir -m go-w -p @var{dir}}, often leads to trouble. FreeBSD @command{mkdir} incorrectly attempts to change the permissions of @var{dir} even if it already exists. HP-UX 11.23 and IRIX 6.5 @command{mkdir} often assign the wrong permissions to any newly-created parents of @var{dir}. Posix does not clearly specify whether @samp{mkdir -p foo} should succeed when @file{foo} is a symbolic link to an already-existing directory. The GNU Core Utilities 5.1.0 @command{mkdir} succeeds, but Solaris @command{mkdir} fails. Traditional @code{mkdir -p} implementations suffer from race conditions. For example, if you invoke @code{mkdir -p a/b} and @code{mkdir -p a/c} at the same time, both processes might detect that @file{a} is missing, one might create @file{a}, then the other might try to create @file{a} and fail with a @code{File exists} diagnostic. The GNU Core Utilities (@samp{fileutils} version 4.1), FreeBSD 5.0, NetBSD 2.0.2, and OpenBSD 2.4 are known to be race-free when two processes invoke @code{mkdir -p} simultaneously, but earlier versions are vulnerable. Solaris @command{mkdir} is still vulnerable as of Solaris 10, and other traditional Unix systems are probably vulnerable too. This possible race is harmful in parallel builds when several Make rules call @code{mkdir -p} to construct directories. You may use @code{install-sh -d} as a safe replacement, provided this script is recent enough; the copy shipped with Autoconf 2.60 and Automake 1.10 is OK, but copies from older versions are vulnerable. @item @command{mkfifo} @itemx @command{mknod} @c ------------------- @prindex @command{mkfifo} @prindex @command{mknod} The GNU Coding Standards state that @command{mknod} is safe to use on platforms where it has been tested to exist; but it is generally portable only for creating named FIFOs, since device numbers are platform-specific. Autotest uses @command{mkfifo} to implement parallel testsuites. Posix states that behavior is unspecified when opening a named FIFO for both reading and writing; on at least Cygwin, this results in failure on any attempt to read or write to that file descriptor. @item @command{mktemp} @c ------------------- @prindex @command{mktemp} @cindex Creating temporary files Shell scripts can use temporary files safely with @command{mktemp}, but it does not exist on all systems. A portable way to create a safe temporary file name is to create a temporary directory with mode 700 and use a file inside this directory. Both methods prevent attackers from gaining control, though @command{mktemp} is far less likely to fail gratuitously under attack. Here is sample code to create a new temporary directory @samp{$dir} safely: @example # Create a temporary directory $dir in $TMPDIR (default /tmp). # Use mktemp if possible; otherwise fall back on mkdir, # with $RANDOM to make collisions less likely. : "$@{TMPDIR:=/tmp@}" @{ dir=` (umask 077 && mktemp -d "$TMPDIR/fooXXXXXX") 2>/dev/null ` && test -d "$dir" @} || @{ dir=$TMPDIR/foo$$-$RANDOM @c $$ restore font-lock (umask 077 && mkdir "$dir") @} || exit $? @end example @item @command{mv} @c --------------- @prindex @command{mv} @cindex Moving open files The only portable options are @option{-f} and @option{-i}. Moving individual files between file systems is portable (it was in Unix version 6), but it is not always atomic: when doing @samp{mv new existing}, there's a critical section where neither the old nor the new version of @file{existing} actually exists. On some systems moving files from @file{/tmp} can sometimes cause undesirable (but perfectly valid) warnings, even if you created these files. This is because @file{/tmp} belongs to a group that ordinary users are not members of, and files created in @file{/tmp} inherit the group of @file{/tmp}. When the file is copied, @command{mv} issues a diagnostic without failing: @smallexample $ @kbd{touch /tmp/foo} $ @kbd{mv /tmp/foo .} @error{}mv: ./foo: set owner/group (was: 100/0): Operation not permitted $ @kbd{echo $?} 0 $ @kbd{ls foo} foo @end smallexample @noindent This annoying behavior conforms to Posix, unfortunately. Moving directories across mount points is not portable, use @command{cp} and @command{rm}. DOS variants cannot rename or remove open files, and do not support commands like @samp{mv foo bar >foo}, even though this is perfectly portable among Posix hosts. @item @command{od} @c --------------- @prindex @command{od} In Mac OS X 10.3, @command{od} does not support the standard Posix options @option{-A}, @option{-j}, @option{-N}, or @option{-t}, or the XSI option, @option{-s}. The only supported Posix option is @option{-v}, and the only supported XSI options are those in @option{-bcdox}. The BSD @command{hexdump} program can be used instead. This problem no longer exists in Mac OS X 10.4.3. @item @command{rm} @c --------------- @prindex @command{rm} The @option{-f} and @option{-r} options are portable. It is not portable to invoke @command{rm} without options or operands. On the other hand, Posix now requires @command{rm -f} to silently succeed when there are no operands (useful for constructs like @command{rm -rf $filelist} without first checking if @samp{$filelist} was empty). But this was not always portable; at least NetBSD @command{rm} built before 2008 would fail with a diagnostic. A file might not be removed even if its parent directory is writable and searchable. Many Posix hosts cannot remove a mount point, a named stream, a working directory, or a last link to a file that is being executed. DOS variants cannot rename or remove open files, and do not support commands like @samp{rm foo >foo}, even though this is perfectly portable among Posix hosts. @item @command{rmdir} @c ------------------ @prindex @command{rmdir} Just as with @command{rm}, some platforms refuse to remove a working directory. @anchor{sed} @item @command{sed} @c ---------------- @prindex @command{sed} Patterns should not include the separator (unless escaped), even as part of a character class. In conformance with Posix, the Cray @command{sed} rejects @samp{s/[^/]*$//}: use @samp{s%[^/]*$%%}. Even when escaped, patterns should not include separators that are also used as @command{sed} metacharacters. For example, GNU sed 4.0.9 rejects @samp{s,x\@{1\,\@},,}, while sed 4.1 strips the backslash before the comma before evaluating the basic regular expression. Avoid empty patterns within parentheses (i.e., @samp{\(\)}). Posix does not require support for empty patterns, and Unicos 9 @command{sed} rejects them. Unicos 9 @command{sed} loops endlessly on patterns like @samp{.*\n.*}. Sed scripts should not use branch labels longer than 7 characters and should not contain comments; AIX 5.3 @command{sed} rejects indented comments. HP-UX sed has a limit of 99 commands (not counting @samp{:} commands) and 48 labels, which cannot be circumvented by using more than one script file. It can execute up to 19 reads with the @samp{r} command per cycle. Solaris @command{/usr/ucb/sed} rejects usages that exceed a limit of about 6000 bytes for the internal representation of commands. Avoid redundant @samp{;}, as some @command{sed} implementations, such as NetBSD 1.4.2's, incorrectly try to interpret the second @samp{;} as a command: @example $ @kbd{echo a | sed 's/x/x/;;s/x/x/'} sed: 1: "s/x/x/;;s/x/x/": invalid command code ; @end example Some @command{sed} implementations have a buffer limited to 4000 bytes, and this limits the size of input lines, output lines, and internal buffers that can be processed portably. Likewise, not all @command{sed} implementations can handle embedded @code{NUL} or a missing trailing newline. Remember that ranges within a bracket expression of a regular expression are only well-defined in the @samp{C} (or @samp{POSIX}) locale. Meanwhile, support for character classes like @samp{[[:upper:]]} is not yet universal, so if you cannot guarantee the setting of @env{LC_ALL}, it is better to spell out a range @samp{[ABCDEFGHIJKLMNOPQRSTUVWXYZ]} than to rely on @samp{[A-Z]}. Additionally, Posix states that regular expressions are only well-defined on characters. Unfortunately, there exist platforms such as MacOS X 10.5 where not all 8-bit byte values are valid characters, even though that platform has a single-byte @samp{C} locale. And Posix allows the existence of a multi-byte @samp{C} locale, although that does not yet appear to be a common implementation. At any rate, it means that not all bytes will be matched by the regular expression @samp{.}: @example $ @kbd{printf '\200\n' | LC_ALL=C sed -n /./p | wc -l} 0 $ @kbd{printf '\200\n' | LC_ALL=en_US.ISO8859-1 sed -n /./p | wc -l} 1 @end example Portable @command{sed} regular expressions should use @samp{\} only to escape characters in the string @samp{$()*.0123456789[\^n@{@}}. For example, alternation, @samp{\|}, is common but Posix does not require its support, so it should be avoided in portable scripts. Solaris @command{sed} does not support alternation; e.g., @samp{sed '/a\|b/d'} deletes only lines that contain the literal string @samp{a|b}. Similarly, @samp{\+} and @samp{\?} should be avoided. Anchors (@samp{^} and @samp{$}) inside groups are not portable. Nested parentheses in patterns (e.g., @samp{\(\(a*\)b*)\)}) are quite portable to current hosts, but was not supported by some ancient @command{sed} implementations like SVR3. Some @command{sed} implementations, e.g., Solaris, restrict the special role of the asterisk @samp{*} to one-character regular expressions and back-references, and the special role of interval expressions @samp{\@{@var{m}\@}}, @samp{\@{@var{m},\@}}, or @samp{\@{@var{m},@var{n}\@}} to one-character regular expressions. This may lead to unexpected behavior: @example $ @kbd{echo '1*23*4' | /usr/bin/sed 's/\(.\)*/x/g'} x2x4 $ @kbd{echo '1*23*4' | /usr/xpg4/bin/sed 's/\(.\)*/x/g'} x @end example The @option{-e} option is mostly portable. However, its argument cannot start with @samp{a}, @samp{c}, or @samp{i}, as this runs afoul of a Tru64 5.1 bug. Also, its argument cannot be empty, as this fails on AIX 5.3. Some people prefer to use @samp{-e}: @example sed -e '@var{command-1}' \ -e '@var{command-2}' @end example @noindent as opposed to the equivalent: @example sed ' @var{command-1} @var{command-2} ' @end example @noindent The following usage is sometimes equivalent: @example sed '@var{command-1};@var{command-2}' @end example but Posix says that this use of a semicolon has undefined effect if @var{command-1}'s verb is @samp{@{}, @samp{a}, @samp{b}, @samp{c}, @samp{i}, @samp{r}, @samp{t}, @samp{w}, @samp{:}, or @samp{#}, so you should use semicolon only with simple scripts that do not use these verbs. Posix up to the 2008 revision requires the argument of the @option{-e} option to be a syntactically complete script. GNU @command{sed} allows to pass multiple script fragments, each as argument of a separate @option{-e} option, that are then combined, with newlines between the fragments, and a future Posix revision may allow this as well. This approach is not portable with script fragments ending in backslash; for example, the @command{sed} programs on Solaris 10, HP-UX 11, and AIX don't allow splitting in this case: @example $ @kbd{echo a | sed -n -e 'i\} @kbd{0'} 0 $ @kbd{echo a | sed -n -e 'i\' -e 0} Unrecognized command: 0 @end example @noindent In practice, however, this technique of joining fragments through @option{-e} works for multiple @command{sed} functions within @samp{@{} and @samp{@}}, even if that is not specified by Posix: @example @c The quote around the closing brace silences interactive zsh. $ @kbd{echo a | sed -n -e '/a/@{' -e s/a/b/ -e p -e '@}'} b @end example Commands inside @{ @} brackets are further restricted. Posix 2008 says that they cannot be preceded by addresses, @samp{!}, or @samp{;}, and that each command must be followed immediately by a newline, without any intervening blanks or semicolons. The closing bracket must be alone on a line, other than white space preceding or following it. However, a future version of Posix may standardize the use of addresses within brackets. Contrary to yet another urban legend, you may portably use @samp{&} in the replacement part of the @code{s} command to mean ``what was matched''. All descendants of Unix version 7 @command{sed} (at least; we don't have first hand experience with older @command{sed} implementations) have supported it. Posix requires that you must not have any white space between @samp{!} and the following command. It is OK to have blanks between the address and the @samp{!}. For instance, on Solaris: @example $ @kbd{echo "foo" | sed -n '/bar/ ! p'} @error{}Unrecognized command: /bar/ ! p $ @kbd{echo "foo" | sed -n '/bar/! p'} @error{}Unrecognized command: /bar/! p $ @kbd{echo "foo" | sed -n '/bar/ !p'} foo @end example Posix also says that you should not combine @samp{!} and @samp{;}. If you use @samp{!}, it is best to put it on a command that is delimited by newlines rather than @samp{;}. Also note that Posix requires that the @samp{b}, @samp{t}, @samp{r}, and @samp{w} commands be followed by exactly one space before their argument. On the other hand, no white space is allowed between @samp{:} and the subsequent label name. If a sed script is specified on the command line and ends in an @samp{a}, @samp{c}, or @samp{i} command, the last line of inserted text should be followed by a newline. Otherwise some @command{sed} implementations (e.g., OpenBSD 3.9) do not append a newline to the inserted text. Many @command{sed} implementations (e.g., MacOS X 10.4, OpenBSD 3.9, Solaris 10 @command{/usr/ucb/sed}) strip leading white space from the text of @samp{a}, @samp{c}, and @samp{i} commands. Prepend a backslash to work around this incompatibility with Posix: @example $ @kbd{echo flushleft | sed 'a\} > @kbd{ indented} > @kbd{'} flushleft indented $ @kbd{echo foo | sed 'a\} > @kbd{\ indented} > @kbd{'} flushleft indented @end example Posix requires that with an empty regular expression, the last non-empty regular expression from either an address specification or substitution command is applied. However, busybox 1.6.1 complains when using a substitution command with a replacement containing a back-reference to an empty regular expression; the workaround is repeating the regular expression. @example $ @kbd{echo abc | busybox sed '/a\(b\)c/ s//\1/'} sed: No previous regexp. $ @kbd{echo abc | busybox sed '/a\(b\)c/ s/a\(b\)c/\1/'} b @end example Portable scripts should be aware of the inconsistencies and options for handling word boundaries, as these are not specified by POSIX. @example \< \b [[:<:]] Solaris 10 yes no no Solaris XPG4 yes no error NetBSD 5.1 no no yes FreeBSD 9.1 no no yes GNU yes yes error busybox yes yes error @end example @item @command{sed} (@samp{t}) @c --------------------------- @prindex @command{sed} (@samp{t}) Some old systems have @command{sed} that ``forget'' to reset their @samp{t} flag when starting a new cycle. For instance on MIPS RISC/OS, and on IRIX 5.3, if you run the following @command{sed} script (the line numbers are not actual part of the texts): @example s/keep me/kept/g # a t end # b s/.*/deleted/g # c :end # d @end example @noindent on @example delete me # 1 delete me # 2 keep me # 3 delete me # 4 @end example @noindent you get @example deleted delete me kept deleted @end example @noindent instead of @example deleted deleted kept deleted @end example Why? When processing line 1, (c) matches, therefore sets the @samp{t} flag, and the output is produced. When processing line 2, the @samp{t} flag is still set (this is the bug). Command (a) fails to match, but @command{sed} is not supposed to clear the @samp{t} flag when a substitution fails. Command (b) sees that the flag is set, therefore it clears it, and jumps to (d), hence you get @samp{delete me} instead of @samp{deleted}. When processing line (3), @samp{t} is clear, (a) matches, so the flag is set, hence (b) clears the flags and jumps. Finally, since the flag is clear, line 4 is processed properly. There are two things one should remember about @samp{t} in @command{sed}. Firstly, always remember that @samp{t} jumps if @emph{some} substitution succeeded, not only the immediately preceding substitution. Therefore, always use a fake @samp{t clear} followed by a @samp{:clear} on the next line, to reset the @samp{t} flag where needed. Secondly, you cannot rely on @command{sed} to clear the flag at each new cycle. One portable implementation of the script above is: @example t clear :clear s/keep me/kept/g t end s/.*/deleted/g :end @end example @item @command{sleep} @c ------------------ @prindex @command{sleep} Using @command{sleep} is generally portable. However, remember that adding a @command{sleep} to work around timestamp issues, with a minimum granularity of one second, doesn't scale well for parallel builds on modern machines with sub-second process completion. @item @command{sort} @c ----------------- @prindex @command{sort} Remember that sort order is influenced by the current locale. Inside @file{configure}, the C locale is in effect, but in Makefile snippets, you may need to specify @code{LC_ALL=C sort}. @item @command{tar} @c ---------------- @prindex @command{tar} There are multiple file formats for @command{tar}; if you use Automake, the macro @code{AM_INIT_AUTOMAKE} has some options controlling which level of portability to use. @anchor{touch} @item @command{touch} @c ------------------ @prindex @command{touch} @cindex timestamp resolution If you specify the desired timestamp (e.g., with the @option{-r} option), older @command{touch} implementations use the @code{utime} or @code{utimes} system call, which can result in the same kind of timestamp truncation problems that @samp{cp -p} has. On ancient BSD systems, @command{touch} or any command that results in an empty file does not update the timestamps, so use a command like @command{echo} as a workaround. Also, GNU @command{touch} 3.16r (and presumably all before that) fails to work on SunOS 4.1.3 when the empty file is on an NFS-mounted 4.2 volume. However, these problems are no longer of practical concern. @item @command{tr} @c --------------- @prindex @command{tr} @cindex carriage return, deleting @cindex newline, deleting @cindex deleting carriage return Not all versions of @command{tr} handle all backslash character escapes. For example, Solaris 10 @command{/usr/ucb/tr} falls over, even though Solaris contains more modern @command{tr} in other locations. Using octal escapes is more portable for carriage returns, since @samp{\015} is the same for both ASCII and EBCDIC, and since use of literal carriage returns in scripts causes a number of other problems. But for other characters, like newline, using octal escapes ties the operation to ASCII, so it is better to use literal characters. @example $ @kbd{@{ echo moon; echo light; @} | /usr/ucb/tr -d '\n' ; echo} moo light $ @kbd{@{ echo moon; echo light; @} | /usr/bin/tr -d '\n' ; echo} moonlight $ @kbd{@{ echo moon; echo light; @} | /usr/ucb/tr -d '\012' ; echo} moonlight $ @kbd{nl='} @kbd{'; @{ echo moon; echo light; @} | /usr/ucb/tr -d "$nl" ; echo} moonlight @end example Not all versions of @command{tr} recognize direct ranges of characters: at least Solaris @command{/usr/bin/tr} still fails to do so. But you can use @command{/usr/xpg4/bin/tr} instead, or add brackets (which in Posix transliterate to themselves). @example $ @kbd{echo "Hazy Fantazy" | LC_ALL=C /usr/bin/tr a-z A-Z} HAZy FAntAZy $ @kbd{echo "Hazy Fantazy" | LC_ALL=C /usr/bin/tr '[a-z]' '[A-Z]'} HAZY FANTAZY $ @kbd{echo "Hazy Fantazy" | LC_ALL=C /usr/xpg4/bin/tr a-z A-Z} HAZY FANTAZY @end example When providing two arguments, be sure the second string is at least as long as the first. @example $ @kbd{echo abc | /usr/xpg4/bin/tr bc d} adc $ @kbd{echo abc | coreutils/tr bc d} add @end example Posix requires @command{tr} to operate on binary files. But at least Solaris @command{/usr/ucb/tr} and @command{/usr/bin/tr} silently discard @code{NUL} in the input prior to doing any translation. When using @command{tr} to process a binary file that may contain @code{NUL} bytes, it is necessary to use @command{/usr/xpg4/bin/tr} instead, or @command{/usr/xpg6/bin/tr} if that is available. @example $ @kbd{printf 'a\0b' | /usr/ucb/tr x x | od -An -tx1} 61 62 $ @kbd{printf 'a\0b' | /usr/bin/tr x x | od -An -tx1} 61 62 $ @kbd{printf 'a\0b' | /usr/xpg4/bin/tr x x | od -An -tx1} 61 00 62 @end example Solaris @command{/usr/ucb/tr} additionally fails to handle @samp{\0} as the octal escape for @code{NUL}. @example $ @kbd{printf 'abc' | /usr/ucb/tr 'bc' '\0d' | od -An -tx1} 61 62 63 $ @kbd{printf 'abc' | /usr/bin/tr 'bc' '\0d' | od -An -tx1} 61 00 64 $ @kbd{printf 'abc' | /usr/xpg4/bin/tr 'bc' '\0d' | od -An -tx1} 61 00 64 @end example @end table @node Portable Make @chapter Portable Make Programming @prindex @command{make} @cindex Limitations of @command{make} Writing portable makefiles is an art. Since a makefile's commands are executed by the shell, you must consider the shell portability issues already mentioned. However, other issues are specific to @command{make} itself. @menu * $< in Ordinary Make Rules:: $< in ordinary rules * Failure in Make Rules:: Failing portably in rules * Special Chars in Names:: Special Characters in Macro Names * Backslash-Newline-Empty:: Empty lines after backslash-newline * Backslash-Newline Comments:: Spanning comments across line boundaries * Long Lines in Makefiles:: Line length limitations * Macros and Submakes:: @code{make macro=value} and submakes * The Make Macro MAKEFLAGS:: @code{$(MAKEFLAGS)} portability issues * The Make Macro SHELL:: @code{$(SHELL)} portability issues * Parallel Make:: Parallel @command{make} quirks * Comments in Make Rules:: Other problems with Make comments * Newlines in Make Rules:: Using literal newlines in rules * Comments in Make Macros:: Other problems with Make comments in macros * Trailing whitespace in Make Macros:: Macro substitution problems * Command-line Macros and whitespace:: Whitespace trimming of values * obj/ and Make:: Don't name a subdirectory @file{obj} * make -k Status:: Exit status of @samp{make -k} * VPATH and Make:: @code{VPATH} woes * Single Suffix Rules:: Single suffix rules and separated dependencies * Timestamps and Make:: Sub-second timestamp resolution @end menu @node $< in Ordinary Make Rules @section @code{$<} in Ordinary Make Rules Posix says that the @samp{$<} construct in makefiles can be used only in inference rules and in the @samp{.DEFAULT} rule; its meaning in ordinary rules is unspecified. Solaris @command{make} for instance replaces it with the empty string. OpenBSD (3.0 and later) @command{make} diagnoses these uses and errors out. @node Failure in Make Rules @section Failure in Make Rules Posix 2008 requires that @command{make} must invoke each command with the equivalent of a @samp{sh -e -c} subshell, which causes the subshell to exit immediately if a subsidiary simple-command fails, although not all @command{make} implementations have historically followed this rule. For example, the command @samp{touch T; rm -f U} may attempt to remove @file{U} even if the @command{touch} fails, although this is not permitted with Posix make. One way to work around failures in simple commands is to reword them so that they always succeed, e.g., @samp{touch T || :; rm -f U}. However, even this approach can run into common bugs in BSD implementations of the @option{-e} option of @command{sh} and @command{set} (@pxref{set, , Limitations of Shell Builtins}), so if you are worried about porting to buggy BSD shells it may be simpler to migrate complicated @command{make} actions into separate scripts. @node Special Chars in Names @section Special Characters in Make Macro Names Posix limits macro names to nonempty strings containing only ASCII letters and digits, @samp{.}, and @samp{_}. Many @command{make} implementations allow a wider variety of characters, but portable makefiles should avoid them. It is portable to start a name with a special character, e.g., @samp{$(.FOO)}. Some ancient @command{make} implementations don't support leading underscores in macro names. An example is NEWS-OS 4.2R. @example $ @kbd{cat Makefile} _am_include = # _am_quote = all:; @@echo this is test $ @kbd{make} Make: Must be a separator on rules line 2. Stop. $ @kbd{cat Makefile2} am_include = # am_quote = all:; @@echo this is test $ @kbd{make -f Makefile2} this is test @end example @noindent However, this problem is no longer of practical concern. @node Backslash-Newline-Empty @section Backslash-Newline Before Empty Lines A bug in Bash 2.03 can cause problems if a Make rule contains a backslash-newline followed by line that expands to nothing. For example, on Solaris 8: @example SHELL = /bin/bash EMPTY = foo: touch foo \ $(EMPTY) @end example @noindent executes @example /bin/bash -c 'touch foo \ ' @end example @noindent which fails with a syntax error, due to the Bash bug. To avoid this problem, avoid nullable macros in the last line of a multi-line command. @c This has been seen on ia64 hpux 11.20, and on one hppa hpux 10.20, @c but another hppa hpux 10.20 didn't have it. Bob Proulx @c thinks it was in hpux 8.0 too. On some versions of HP-UX, @command{make} reads multiple newlines following a backslash, continuing to the next non-empty line. For example, @example FOO = one \ BAR = two test: : FOO is "$(FOO)" : BAR is "$(BAR)" @end example @noindent shows @code{FOO} equal to @code{one BAR = two}. Other implementations sensibly let a backslash continue only to the immediately following line. @node Backslash-Newline Comments @section Backslash-Newline in Make Comments According to Posix, Make comments start with @code{#} and continue until an unescaped newline is reached. @example $ @kbd{cat Makefile} # A = foo \ bar \ baz all: @@echo ok $ @kbd{make} # GNU make ok @end example @noindent However this is not always the case. Some implementations discard everything from @code{#} through the end of the line, ignoring any trailing backslash. @example $ @kbd{pmake} # BSD make "Makefile", line 3: Need an operator Fatal errors encountered -- cannot continue @end example @noindent Therefore, if you want to comment out a multi-line definition, prefix each line with @code{#}, not only the first. @example # A = foo \ # bar \ # baz @end example @node Long Lines in Makefiles @section Long Lines in Makefiles Tru64 5.1's @command{make} has been reported to crash when given a makefile with lines longer than around 20 kB. Earlier versions are reported to exit with @code{Line too long} diagnostics. @node Macros and Submakes @section @code{make macro=value} and Submakes A command-line variable definition such as @code{foo=bar} overrides any definition of @code{foo} in a makefile. Some @command{make} implementations (such as GNU @command{make}) propagate this override to subsidiary invocations of @command{make}. Some other implementations do not pass the substitution along to submakes. @example $ @kbd{cat Makefile} foo = foo one: @@echo $(foo) $(MAKE) two two: @@echo $(foo) $ @kbd{make foo=bar} # GNU make 3.79.1 bar make two make[1]: Entering directory `/home/adl' bar make[1]: Leaving directory `/home/adl' $ @kbd{pmake foo=bar} # BSD make bar pmake two foo @end example You have a few possibilities if you do want the @code{foo=bar} override to propagate to submakes. One is to use the @option{-e} option, which causes all environment variables to have precedence over the makefile macro definitions, and declare foo as an environment variable: @example $ @kbd{env foo=bar make -e} @end example The @option{-e} option is propagated to submakes automatically, and since the environment is inherited between @command{make} invocations, the @code{foo} macro is overridden in submakes as expected. This syntax (@code{foo=bar make -e}) is portable only when used outside of a makefile, for instance from a script or from the command line. When run inside a @command{make} rule, GNU @command{make} 3.80 and prior versions forget to propagate the @option{-e} option to submakes. Moreover, using @option{-e} could have unexpected side effects if your environment contains some other macros usually defined by the makefile. (See also the note about @code{make -e} and @code{SHELL} below.) If you can foresee all macros that a user might want to override, then you can propagate them to submakes manually, from your makefile: @example foo = foo one: @@echo $(foo) $(MAKE) foo=$(foo) two two: @@echo $(foo) @end example Another way to propagate a variable to submakes in a portable way is to expand an extra variable in every invocation of @samp{$(MAKE)} within your makefile: @example foo = foo one: @@echo $(foo) $(MAKE) $(SUBMAKEFLAGS) two two: @@echo $(foo) @end example Users must be aware that this technique is in use to take advantage of it, e.g.@: with @code{make foo=bar SUBMAKEFLAGS='foo=bar'}, but it allows any macro to be overridden. Makefiles generated by @command{automake} use this technique, expanding @code{$(AM_MAKEFLAGS)} on the command lines of submakes (@pxref{Subdirectories, , Automake, automake, GNU Automake}). @node The Make Macro MAKEFLAGS @section The Make Macro MAKEFLAGS @cindex @code{MAKEFLAGS} and @command{make} @cindex @command{make} and @code{MAKEFLAGS} Posix requires @command{make} to use @code{MAKEFLAGS} to affect the current and recursive invocations of make, but allows implementations several formats for the variable. It is tricky to parse @code{$MAKEFLAGS} to determine whether @option{-s} for silent execution or @option{-k} for continued execution are in effect. For example, you cannot assume that the first space-separated word in @code{$MAKEFLAGS} contains single-letter options, since in the Cygwin version of GNU @command{make} it is either @option{--unix} or @option{--win32} with the second word containing single-letter options. @example $ @kbd{cat Makefile} all: @@echo MAKEFLAGS = $(MAKEFLAGS) $ @kbd{make} MAKEFLAGS = --unix $ @kbd{make -k} MAKEFLAGS = --unix -k @end example @node The Make Macro SHELL @section The Make Macro @code{SHELL} @cindex @code{SHELL} and @command{make} @cindex @command{make} and @code{SHELL} Posix-compliant @command{make} internally uses the @code{$(SHELL)} macro to spawn shell processes and execute Make rules. This is a builtin macro supplied by @command{make}, but it can be modified by a makefile or by a command-line argument. Not all @command{make} implementations define this @code{SHELL} macro. Tru64 @command{make} is an example; this implementation always uses @code{/bin/sh}. So it's a good idea to always define @code{SHELL} in your makefiles. If you use Autoconf, do @example SHELL = @@SHELL@@ @end example @noindent If you use Automake, this is done for you. Do not force @code{SHELL = /bin/sh} because that is not correct everywhere. Remember, @file{/bin/sh} is not Posix compliant on many systems, such as FreeBSD 4, NetBSD 3, AIX 3, Solaris 10, or Tru64. Additionally, DJGPP lacks @code{/bin/sh}, and when its GNU @command{make} port sees such a setting it enters a special emulation mode where features like pipes and redirections are emulated on top of DOS's @command{command.com}. Unfortunately this emulation is incomplete; for instance it does not handle command substitutions. Using @code{@@SHELL@@} means that your makefile will benefit from the same improved shell, such as @command{bash} or @command{ksh}, that was discovered during @command{configure}, so that you aren't fighting two different sets of shell bugs between the two contexts. Posix-compliant @command{make} should never acquire the value of $(SHELL) from the environment, even when @code{make -e} is used (otherwise, think about what would happen to your rules if @code{SHELL=/bin/tcsh}). However not all @command{make} implementations have this exception. For instance it's not surprising that Tru64 @command{make} doesn't protect @code{SHELL}, since it doesn't use it. @example $ @kbd{cat Makefile} SHELL = /bin/sh FOO = foo all: @@echo $(SHELL) @@echo $(FOO) $ @kbd{env SHELL=/bin/tcsh FOO=bar make -e} # Tru64 Make /bin/tcsh bar $ @kbd{env SHELL=/bin/tcsh FOO=bar gmake -e} # GNU make /bin/sh bar @end example Conversely, @command{make} is not supposed to export any changes to the macro @code{SHELL} to child processes. Again, many implementations break this rule: @example $ @kbd{cat Makefile} all: @@echo $(SHELL) @@printenv SHELL $ @kbd{env SHELL=sh make -e SHELL=/bin/ksh} # BSD Make, GNU make 3.80 /bin/ksh /bin/ksh $ @kbd{env SHELL=sh gmake -e SHELL=/bin/ksh} # GNU make 3.81 /bin/ksh sh @end example @node Parallel Make @section Parallel Make @cindex Parallel @command{make} Support for parallel execution in @command{make} implementation varies. Generally, using GNU make is your best bet. When NetBSD or FreeBSD @command{make} are run in parallel mode, they will reuse the same shell for multiple commands within one recipe. This can have various unexpected consequences. For example, changes of directories or variables persist between recipes, so that: @example all: @@var=value; cd /; pwd; echo $$var; echo $$$$ @@pwd; echo $$var; echo $$$$ @end example @noindent may output the following with @code{make -j1}, at least on NetBSD up to 5.1 and FreeBSD up to 8.2: @example / value 32235 / value 32235 @end example @noindent while without @option{-j1}, or with @option{-B}, the output looks less surprising: @example / value 32238 /tmp 32239 @end example @noindent Another consequence is that, if one command in a recipe uses @code{exit 0} to indicate a successful exit, the shell will be gone and the remaining commands of this recipe will not be executed. The BSD @command{make} implementations, when run in parallel mode, will also pass the @command{Makefile} recipes to the shell through its standard input, thus making it unusable from the recipes: @example $ @kbd{cat Makefile} read: @@read line; echo LINE: $$line @c $$ @c restore font-lock $ @kbd{echo foo | make read} LINE: foo $ @kbd{echo foo | make -j1 read} # NetBSD 5.1 and FreeBSD 8.2 LINE: @end example @noindent Moreover, when FreeBSD @command{make} (up at least to 8.2) is run in parallel mode, it implements the @code{@@} and @code{-} ``recipe modifiers'' by dynamically modifying the active shell flags. This behavior has the effects of potentially clobbering the exit status of recipes silenced with the @code{@@} modifier if they also unset the @option{errexit} shell flag, and of mangling the output in unexpected ways: @example $ @kbd{cat Makefile} a: @@echo $$-; set +e; false b: -echo $$-; false; echo set - $ @kbd{make a; echo status: $?} ehBc *** Error code 1 status: 1 $ @kbd{make -j1 a; echo status: $?} ehB status: 0 $ @kbd{make b} echo $-; echo set - hBc set - $ @kbd{make -j1 b} echo $-; echo hvB @end example @noindent You can avoid all these issues by using the @option{-B} option to enable compatibility semantics. However, that will effectively also disable all parallelism as that will cause prerequisites to be updated in the order they are listed in a rule. Some make implementations (among them, FreeBSD @command{make}, NetBSD @command{make}, and Solaris @command{dmake}), when invoked with a @option{-j@var{N}} option, connect the standard output and standard error of all their child processes to pipes or temporary regular files. This can lead to subtly different semantics in the behavior of the spawned processes. For example, even if the @command{make} standard output is connected to a tty, the recipe command will not be: @example $ @kbd{cat Makefile} all: @@test -t 1 && echo "Is a tty" || echo "Is not a tty" $ @kbd{make -j 2} # FreeBSD 8.2 make Is not a tty $ @kbd{make -j 2} # NetBSD 5.1 make --- all --- Is not a tty $ @kbd{dmake -j 2} # Solaris 10 dmake @var{hostname} --> 1 job @var{hostname} --> Job output Is not a tty @end example @noindent On the other hand: @example $ @kbd{make -j 2} # GNU make, Heirloom make Is a tty @end example @noindent The above examples also show additional status output produced in parallel mode for targets being updated by Solaris @command{dmake} and NetBSD @command{make} (but @emph{not} by FreeBSD @command{make}). Furthermore, parallel runs of those @command{make} implementations will route standard error from commands that they spawn into their own standard output, and may remove leading whitespace from output lines. @node Comments in Make Rules @section Comments in Make Rules @cindex Comments in @file{Makefile} rules @cindex @file{Makefile} rules and comments Never put comments in a rule. Some @command{make} treat anything starting with a tab as a command for the current rule, even if the tab is immediately followed by a @code{#}. The @command{make} from Tru64 Unix V5.1 is one of them. The following makefile runs @code{# foo} through the shell. @example all: # foo @end example As a workaround, you can use the @command{:} no-op command with a string argument that gets ignored: @example all: : "foo" @end example Conversely, if you want to use the @samp{#} character in some command, you can only do so by expanding it inside a rule (@pxref{Comments in Make Macros}). So for example, if @samp{COMMENT_CHAR} is substituted by @command{config.status} as @samp{#}, then the following substitutes @samp{@@COMMENT_CHAR@@} in a generated header: @example foo.h: foo.h.in sed -e 's|@@''COMMENT_CHAR''@@|@@COMMENT_CHAR@@|g' \ $(srcdir)/foo.h.in > $@@ @end example The funny shell quoting avoids a substitution at @command{config.status} run time of the left-hand side of the @command{sed} @samp{s} command. @node Newlines in Make Rules @section Newlines in Make Rules @cindex Newlines in @file{Makefile} rules @cindex @file{Makefile} rules and newlines In shell scripts, newlines can be used inside string literals. But in the shell statements of @file{Makefile} rules, this is not possible: A newline not preceded by a backslash is a separator between shell statements. Whereas a newline that is preceded by a backslash becomes part of the shell statement according to POSIX, but gets replaced, together with the backslash that precedes it, by a space in GNU @command{make} 3.80 and older. So, how can a newline be used in a string literal? The trick is to set up a shell variable that contains a newline: @example nlinit=`echo 'nl="'; echo '"'`; eval "$$nlinit" @end example For example, in order to create a multi-line @samp{sed} expression that inserts a blank line after every line of a file, this code can be used: @example nlinit=`echo 'nl="'; echo '"'`; eval "$$nlinit"; \ sed -e "s/\$$/\\$$@{nl@}/" < input > output @end example @node Comments in Make Macros @section Comments in Make Macros @cindex Comments in @file{Makefile} macros @cindex @file{Makefile} macros and comments Avoid putting comments in macro values as far as possible. Posix specifies that the text starting from the @samp{#} sign until the end of the line is to be ignored, which has the unfortunate effect of disallowing them even within quotes. Thus, the following might lead to a syntax error at compile time: @example CPPFLAGS = "-DCOMMENT_CHAR='#'" @end example @noindent as @samp{CPPFLAGS} may be expanded to @samp{"-DCOMMENT_CHAR='}. Most @command{make} implementations disregard this and treat single and double quotes specially here. Also, GNU @command{make} lets you put @samp{#} into a macro value by escaping it with a backslash, i.e., @samp{\#}. However, neither of these usages are portable. @xref{Comments in Make Rules}, for a portable alternative. Even without quoting involved, comments can have surprising effects, because the whitespace before them is part of the variable value: @example foo = bar # trailing comment print: ; @@echo "$(foo)." @end example @noindent prints @samp{bar .}, which is usually not intended, and can expose @command{make} bugs as described below. @node Trailing whitespace in Make Macros @section Trailing whitespace in Make Macros @cindex whitespace in @file{Makefile} macros @cindex @file{Makefile} macros and whitespace GNU @command{make} 3.80 mistreats trailing whitespace in macro substitutions and appends another spurious suffix: @example empty = foo = bar $(empty) print: ; @@echo $(foo:=.test) @end example @noindent prints @samp{bar.test .test}. BSD and Solaris @command{make} implementations do not honor trailing whitespace in macro definitions as Posix requires: @example foo = bar # Note the space after "bar". print: ; @@echo $(foo)t @end example @noindent prints @samp{bart} instead of @samp{bar t}. To work around this, you can use a helper macro as in the previous example. @node Command-line Macros and whitespace @section Command-line Macros and whitespace @cindex whitespace in command-line macros @cindex command-line, macros set on @cindex environment, macros set from Some @command{make} implementations may strip trailing whitespace off of macros set on the command line in addition to leading whitespace. Further, some may strip leading whitespace off of macros set from environment variables: @example $ @kbd{echo 'print: ; @@echo "x$(foo)x$(bar)x"' | foo=' f f ' make -f - bar=' b b '} x f f xb b x # AIX, BSD, GNU make xf f xb b x # HP-UX, IRIX, Tru64/OSF make x f f xb bx # Solaris make @end example @node obj/ and Make @section The @file{obj/} Subdirectory and Make @cindex @file{obj/}, subdirectory @cindex BSD @command{make} and @file{obj/} Never name one of your subdirectories @file{obj/} if you don't like surprises. If an @file{obj/} directory exists, BSD @command{make} enters it before reading the makefile. Hence the makefile in the current directory is not read. @example $ @kbd{cat Makefile} all: echo Hello $ @kbd{cat obj/Makefile} all: echo World $ @kbd{make} # GNU make echo Hello Hello $ @kbd{pmake} # BSD make echo World World @end example @node make -k Status @section Exit Status of @code{make -k} @cindex @code{make -k} Do not rely on the exit status of @code{make -k}. Some implementations reflect whether they encountered an error in their exit status; other implementations always succeed. @example $ @kbd{cat Makefile} all: false $ @kbd{make -k; echo exit status: $?} # GNU make false make: *** [all] Error 1 exit status: 2 $ @kbd{pmake -k; echo exit status: $?} # BSD make false *** Error code 1 (continuing) exit status: 0 @end example @node VPATH and Make @section @code{VPATH} and Make @cindex @code{VPATH} Posix does not specify the semantics of @code{VPATH}. Typically, @command{make} supports @code{VPATH}, but its implementation is not consistent. Autoconf and Automake support makefiles whose usages of @code{VPATH} are portable to recent-enough popular implementations of @command{make}, but to keep the resulting makefiles portable, a package's makefile prototypes must take the following issues into account. These issues are complicated and are often poorly understood, and installers who use @code{VPATH} should expect to find many bugs in this area. If you use @code{VPATH}, the simplest way to avoid these portability bugs is to stick with GNU @command{make}, since it is the most commonly-used @command{make} among Autoconf users. Here are some known issues with some @code{VPATH} implementations. @menu * Variables listed in VPATH:: @code{VPATH} must be literal on ancient hosts * VPATH and Double-colon:: Problems with @samp{::} on ancient hosts * $< in Explicit Rules:: @code{$<} does not work in ordinary rules * Automatic Rule Rewriting:: @code{VPATH} goes wild on Solaris * Tru64 Directory Magic:: @command{mkdir} goes wild on Tru64 * Make Target Lookup:: More details about @code{VPATH} lookup @end menu @node Variables listed in VPATH @subsection Variables listed in @code{VPATH} @cindex @code{VPATH} and variables @cindex variables and @code{VPATH} Do not set @code{VPATH} to the value of another variable, for example @samp{VPATH = $(srcdir)}, because some ancient versions of @command{make} do not do variable substitutions on the value of @code{VPATH}. For example, use this @example srcdir = @@srcdir@@ VPATH = @@srcdir@@ @end example @noindent rather than @samp{VPATH = $(srcdir)}. Note that with GNU Automake, there is no need to set this yourself. @node VPATH and Double-colon @subsection @code{VPATH} and Double-colon Rules @cindex @code{VPATH} and double-colon rules @cindex double-colon rules and @code{VPATH} With ancient versions of Sun @command{make}, any assignment to @code{VPATH} causes @command{make} to execute only the first set of double-colon rules. However, this problem is no longer of practical concern. @node $< in Explicit Rules @subsection @code{$<} Not Supported in Explicit Rules @cindex explicit rules, @code{$<}, and @code{VPATH} @cindex @code{$<}, explicit rules, and @code{VPATH} @cindex @code{VPATH}, explicit rules, and @code{$<} Using @code{$<} in explicit rules is not portable. The prerequisite file must be named explicitly in the rule. If you want to find the prerequisite via a @code{VPATH} search, you have to code the whole thing manually. @xref{Build Directories}. @node Automatic Rule Rewriting @subsection Automatic Rule Rewriting @cindex @code{VPATH} and automatic rule rewriting @cindex automatic rule rewriting and @code{VPATH} Some @command{make} implementations, such as Solaris and Tru64, search for prerequisites in @code{VPATH} and then rewrite each occurrence as a plain word in the rule. For instance: @example # This isn't portable to GNU make. VPATH = ../pkg/src f.c: if.c cp if.c f.c @end example @noindent executes @code{cp ../pkg/src/if.c f.c} if @file{if.c} is found in @file{../pkg/src}. However, this rule leads to real problems in practice. For example, if the source directory contains an ordinary file named @file{test} that is used in a dependency, Solaris @command{make} rewrites commands like @samp{if test -r foo; @dots{}} to @samp{if ../pkg/src/test -r foo; @dots{}}, which is typically undesirable. In fact, @command{make} is completely unaware of shell syntax used in the rules, so the VPATH rewrite can potentially apply to @emph{any} whitespace-separated word in a rule, including shell variables, functions, and keywords. @example $ @kbd{mkdir build} $ @kbd{cd build} $ @kbd{cat > Makefile <<'END'} VPATH = .. all: arg func for echo func () @{ for arg in "$$@@"; do echo $$arg; done; @}; \ func "hello world" END $ @kbd{touch ../arg ../func ../for ../echo} $ @kbd{make} ../func () @{ ../for ../arg in "$@@"; do ../echo $arg; done; @}; \ ../func "hello world" sh: syntax error at line 1: `do' unexpected *** Error code 2 @end example @noindent To avoid this problem, portable makefiles should never mention a source file or dependency whose name is that of a shell keyword like @file{for} or @file{until}, a shell command like @command{cat} or @command{gcc} or @command{test}, or a shell function or variable used in the corresponding @command{Makefile} recipe. Because of these problems GNU @command{make} and many other @command{make} implementations do not rewrite commands, so portable makefiles should search @code{VPATH} manually. It is tempting to write this: @smallexample # This isn't portable to Solaris make. VPATH = ../pkg/src f.c: if.c cp `test -f if.c || echo $(VPATH)/`if.c f.c @end smallexample @noindent However, the ``prerequisite rewriting'' still applies here. So if @file{if.c} is in @file{../pkg/src}, Solaris and Tru64 @command{make} execute @smallexample cp `test -f ../pkg/src/if.c || echo ../pkg/src/`if.c f.c @end smallexample @noindent which reduces to @example cp if.c f.c @end example @noindent and thus fails. Oops. A simple workaround, and good practice anyway, is to use @samp{$?} and @samp{$@@} when possible: @smallexample VPATH = ../pkg/src f.c: if.c cp $? $@@ @end smallexample @noindent but this does not generalize well to commands with multiple prerequisites. A more general workaround is to rewrite the rule so that the prerequisite @file{if.c} never appears as a plain word. For example, these three rules would be safe, assuming @file{if.c} is in @file{../pkg/src} and the other files are in the working directory: @smallexample VPATH = ../pkg/src f.c: if.c f1.c cat `test -f ./if.c || echo $(VPATH)/`if.c f1.c >$@@ g.c: if.c g1.c cat `test -f 'if.c' || echo $(VPATH)/`if.c g1.c >$@@ h.c: if.c h1.c cat `test -f "if.c" || echo $(VPATH)/`if.c h1.c >$@@ @end smallexample Things get worse when your prerequisites are in a macro. @example VPATH = ../pkg/src HEADERS = f.h g.h h.h install-HEADERS: $(HEADERS) for i in $(HEADERS); do \ $(INSTALL) -m 644 \ `test -f $$i || echo $(VPATH)/`$$i \ $(DESTDIR)$(includedir)/$$i; \ @c $$ restore font-lock done @end example The above @code{install-HEADERS} rule is not Solaris-proof because @code{for i in $(HEADERS);} is expanded to @code{for i in f.h g.h h.h;} where @code{f.h} and @code{g.h} are plain words and are hence subject to @code{VPATH} adjustments. If the three files are in @file{../pkg/src}, the rule is run as: @example for i in ../pkg/src/f.h ../pkg/src/g.h h.h; do \ install -m 644 \ `test -f $i || echo ../pkg/src/`$i \ /usr/local/include/$i; \ done @end example where the two first @command{install} calls fail. For instance, consider the @code{f.h} installation: @example install -m 644 \ `test -f ../pkg/src/f.h || \ echo ../pkg/src/ \ `../pkg/src/f.h \ /usr/local/include/../pkg/src/f.h; @end example @noindent It reduces to: @example install -m 644 \ ../pkg/src/f.h \ /usr/local/include/../pkg/src/f.h; @end example Note that the manual @code{VPATH} search did not cause any problems here; however this command installs @file{f.h} in an incorrect directory. Trying to quote @code{$(HEADERS)} in some way, as we did for @code{foo.c} a few makefiles ago, does not help: @example install-HEADERS: $(HEADERS) headers='$(HEADERS)'; \ for i in $$headers; do \ $(INSTALL) -m 644 \ `test -f $$i || echo $(VPATH)/`$$i \ $(DESTDIR)$(includedir)/$$i; \ done @end example Now, @code{headers='$(HEADERS)'} macro-expands to: @example headers='f.h g.h h.h' @end example @noindent but @code{g.h} is still a plain word. (As an aside, the idiom @code{headers='$(HEADERS)'; for i in $$headers;} is a good idea if @code{$(HEADERS)} can be empty, because some shells diagnose a syntax error on @code{for i in;}.) One workaround is to strip this unwanted @file{../pkg/src/} prefix manually: @example VPATH = ../pkg/src HEADERS = f.h g.h h.h install-HEADERS: $(HEADERS) headers='$(HEADERS)'; \ for i in $$headers; do \ i=`expr "$$i" : '$(VPATH)/\(.*\)'`; $(INSTALL) -m 644 \ `test -f $$i || echo $(VPATH)/`$$i \ $(DESTDIR)$(includedir)/$$i; \ @c $$ restore font-lock done @end example Automake does something similar. However the above hack works only if the files listed in @code{HEADERS} are in the current directory or a subdirectory; they should not be in an enclosing directory. If we had @code{HEADERS = ../f.h}, the above fragment would fail in a VPATH build with Tru64 @command{make}. The reason is that not only does Tru64 @command{make} rewrite dependencies, but it also simplifies them. Hence @code{../f.h} becomes @code{../pkg/f.h} instead of @code{../pkg/src/../f.h}. This obviously defeats any attempt to strip a leading @file{../pkg/src/} component. The following example makes the behavior of Tru64 @command{make} more apparent. @example $ @kbd{cat Makefile} VPATH = sub all: ../foo echo ../foo $ @kbd{ls} Makefile foo $ @kbd{make} echo foo foo @end example @noindent Dependency @file{../foo} was found in @file{sub/../foo}, but Tru64 @command{make} simplified it as @file{foo}. (Note that the @file{sub/} directory does not even exist, this just means that the simplification occurred before the file was checked for.) For the record here is how SunOS 4 @command{make} behaves on this example. @smallexample $ @kbd{make} make: Fatal error: Don't know how to make target `../foo' $ @kbd{mkdir sub} $ @kbd{make} echo sub/../foo sub/../foo @end smallexample @node Tru64 Directory Magic @subsection Tru64 @command{make} Creates Prerequisite Directories Magically @cindex @code{VPATH} and prerequisite directories @cindex prerequisite directories and @code{VPATH} When a prerequisite is a subdirectory of @code{VPATH}, Tru64 @command{make} creates it in the current directory. @example $ @kbd{mkdir -p foo/bar build} $ @kbd{cd build} $ @kbd{cat >Makefile <dest-stamp @end example Apart from timestamp resolution, there are also differences in handling equal timestamps. HP-UX @command{make} updates targets if it has the same timestamp as one of its prerequisites, in violation of Posix rules. This can cause spurious rebuilds for repeated runs of @command{make}. This in turn can cause @command{make} to fail if it tries to rebuild generated files in a possibly read-only source tree with tools not present on the end-user machine. Use GNU @command{make} instead. @c ======================================== Portable C and C++ Programming @node Portable C and C++ @chapter Portable C and C++ Programming @cindex Portable C and C++ programming C and C++ programs often use low-level features of the underlying system, and therefore are often more difficult to make portable to other platforms. Several standards have been developed to help make your programs more portable. If you write programs with these standards in mind, you can have greater confidence that your programs work on a wide variety of systems. @ifhtml @uref{https://@/gcc.gnu.org/@/onlinedocs/@/gcc/@/Standards.html, Language Standards Supported by GCC} @end ifhtml @ifnothtml @xref{Standards, , Language Standards Supported by GCC, gcc, Using the GNU Compiler Collection (GCC)}, @end ifnothtml for a list of C-related standards. Many programs also assume the @uref{https://@/en.wikipedia.org/@/wiki/@/POSIX, Posix standard}. Some old code is written to be portable to K&R C, which predates any C standard. K&R C compilers are no longer of practical interest, though, and the rest of section assumes at least C89, the first C standard. Program portability is a huge topic, and this section can only briefly introduce common pitfalls. @xref{System Portability, , Portability between System Types, standards, The GNU Coding Standards}, for more information. @menu * Varieties of Unportability:: How to make your programs unportable * Integer Overflow:: When integers get too large * Preprocessor Arithmetic:: @code{#if} expression problems * Null Pointers:: Properties of null pointers * Buffer Overruns:: Subscript errors and the like * Volatile Objects:: @code{volatile} and signals * Floating Point Portability:: Portable floating-point arithmetic * Exiting Portably:: Exiting and the exit status @end menu @node Varieties of Unportability @section Varieties of Unportability @cindex portability Autoconf tests and ordinary programs often need to test what is allowed on a system, and therefore they may need to deliberately exceed the boundaries of what the standards allow, if only to see whether an optional feature is present. When you write such a program, you should keep in mind the difference between constraints, unspecified behavior, and undefined behavior. In C, a @dfn{constraint} is a rule that the compiler must enforce. An example constraint is that C programs must not declare a bit-field with negative width. Tests can therefore reliably assume that programs with negative-width bit-fields are rejected by a compiler that conforms to the standard. @dfn{Unspecified behavior} is valid behavior, where the standard allows multiple possibilities. For example, the order of evaluation of function arguments is unspecified. Some unspecified behavior is @dfn{implementation-defined}, i.e., documented by the implementation, but since Autoconf tests cannot read the documentation they cannot distinguish between implementation-defined and other unspecified behavior. It is common for Autoconf tests to probe implementations to determine otherwise-unspecified behavior. @dfn{Undefined behavior} is invalid behavior, where the standard allows the implementation to do anything it pleases. For example, dereferencing a null pointer leads to undefined behavior. If possible, test programs should avoid undefined behavior, since a program with undefined behavior might succeed on a test that should fail. The above rules apply to programs that are intended to conform to the standard. However, strictly-conforming programs are quite rare, since the standards are so limiting. A major goal of Autoconf is to support programs that use implementation features not described by the standard, and it is fairly common for test programs to violate the above rules, if the programs work well enough in practice. @node Integer Overflow @section Integer Overflow @cindex integer overflow @cindex overflow, signed integer @cindex signed integer overflow @cindex wraparound arithmetic In practice many portable C programs assume that signed integer overflow wraps around reliably using two's complement arithmetic. Yet the C standard says that program behavior is undefined on overflow, and in a few cases C programs do not work on some modern implementations because their overflows do not wrap around as their authors expected. Conversely, in signed integer remainder, the C standard requires overflow behavior that is commonly not implemented. @menu * Integer Overflow Basics:: Why integer overflow is a problem * Signed Overflow Examples:: Examples of code assuming wraparound * Optimization and Wraparound:: Optimizations that break uses of wraparound * Signed Overflow Advice:: Practical advice for signed overflow issues * Signed Integer Division:: @code{INT_MIN / -1} and @code{INT_MIN % -1} @end menu @node Integer Overflow Basics @subsection Basics of Integer Overflow @cindex integer overflow @cindex overflow, signed integer @cindex signed integer overflow @cindex wraparound arithmetic In languages like C, unsigned integer overflow reliably wraps around; e.g., @code{UINT_MAX + 1} yields zero. This is guaranteed by the C standard and is portable in practice, unless you specify aggressive, nonstandard optimization options suitable only for special applications. In contrast, the C standard says that signed integer overflow leads to undefined behavior where a program can do anything, including dumping core or overrunning a buffer. The misbehavior can even precede the overflow. Such an overflow can occur during addition, subtraction, multiplication, division, and left shift. Despite this requirement of the standard, many C programs and Autoconf tests assume that signed integer overflow silently wraps around modulo a power of two, using two's complement arithmetic, so long as you cast the resulting value to a signed integer type or store it into a signed integer variable. If you use conservative optimization flags, such programs are generally portable to the vast majority of modern platforms, with a few exceptions discussed later. For historical reasons the C standard also allows implementations with ones' complement or signed magnitude arithmetic, but it is safe to assume two's complement nowadays. Also, overflow can occur when converting an out-of-range value to a signed integer type. Here a standard implementation must define what happens, but this might include raising an exception. In practice all known implementations support silent wraparound in this case, so you need not worry about other possibilities. @node Signed Overflow Examples @subsection Examples of Code Assuming Wraparound Overflow @cindex integer overflow @cindex overflow, signed integer @cindex signed integer overflow @cindex wraparound arithmetic There has long been a tension between what the C standard requires for signed integer overflow, and what C programs commonly assume. The standard allows aggressive optimizations based on assumptions that overflow never occurs, but many practical C programs rely on overflow wrapping around. These programs do not conform to the standard, but they commonly work in practice because compiler writers are understandably reluctant to implement optimizations that would break many programs, unless perhaps a user specifies aggressive optimization. The C Standard says that if a program has signed integer overflow its behavior is undefined, and the undefined behavior can even precede the overflow. To take an extreme example: @c Inspired by Robert Dewar's example in @c (2007-01-01). @example if (password == expected_password) allow_superuser_privileges (); else if (counter++ == INT_MAX) abort (); else printf ("%d password mismatches\n", counter); @end example @noindent If the @code{int} variable @code{counter} equals @code{INT_MAX}, @code{counter++} must overflow and the behavior is undefined, so the C standard allows the compiler to optimize away the test against @code{INT_MAX} and the @code{abort} call. Worse, if an earlier bug in the program lets the compiler deduce that @code{counter == INT_MAX} or that @code{counter} previously overflowed, the C standard allows the compiler to optimize away the password test and generate code that allows superuser privileges unconditionally. Despite this requirement by the standard, it has long been common for C code to assume wraparound arithmetic after signed overflow, and all known practical C implementations support some C idioms that assume wraparound signed arithmetic, even if the idioms do not conform strictly to the standard. If your code looks like the following examples it will almost surely work with real-world compilers. Here is an example derived from the 7th Edition Unix implementation of @code{atoi} (1979-01-10): @example char *p; int f, n; @dots{} while (*p >= '0' && *p <= '9') n = n * 10 + *p++ - '0'; return (f ? -n : n); @end example @noindent Even if the input string is in range, on most modern machines this has signed overflow when computing the most negative integer (the @code{-n} overflows) or a value near an extreme integer (the first @code{+} overflows). Here is another example, derived from the 7th Edition implementation of @code{rand} (1979-01-10). Here the programmer expects both multiplication and addition to wrap on overflow: @example static long int randx = 1; @dots{} randx = randx * 1103515245 + 12345; return (randx >> 16) & 077777; @end example In the following example, derived from the GNU C Library 2.5 implementation of @code{mktime} (2006-09-09), the code assumes wraparound arithmetic in @code{+} to detect signed overflow: @example time_t t, t1, t2; int sec_requested, sec_adjustment; @dots{} t1 = t + sec_requested; t2 = t1 + sec_adjustment; if (((t1 < t) != (sec_requested < 0)) | ((t2 < t1) != (sec_adjustment < 0))) return -1; @end example If your code looks like these examples, it is probably safe even though it does not strictly conform to the C standard. This might lead one to believe that one can generally assume wraparound on overflow, but that is not always true, as can be seen in the next section. @node Optimization and Wraparound @subsection Optimizations That Break Wraparound Arithmetic @cindex loop induction Compilers sometimes generate code that is incompatible with wraparound integer arithmetic. A simple example is an algebraic simplification: a compiler might translate @code{(i * 2000) / 1000} to @code{i * 2} because it assumes that @code{i * 2000} does not overflow. The translation is not equivalent to the original when overflow occurs: e.g., in the typical case of 32-bit signed two's complement wraparound @code{int}, if @code{i} has type @code{int} and value @code{1073742}, the original expression returns @minus{}2147483 but the optimized version returns the mathematically correct value 2147484. More subtly, loop induction optimizations often exploit the undefined behavior of signed overflow. Consider the following contrived function @code{sumc}: @example int sumc (int lo, int hi) @{ int sum = 0; int i; for (i = lo; i <= hi; i++) sum ^= i * 53; return sum; @} @end example @noindent To avoid multiplying by 53 each time through the loop, an optimizing compiler might internally transform @code{sumc} to the equivalent of the following: @example int transformed_sumc (int lo, int hi) @{ int sum = 0; int hic = hi * 53; int ic; for (ic = lo * 53; ic <= hic; ic += 53) sum ^= ic; return sum; @} @end example @noindent This transformation is allowed by the C standard, but it is invalid for wraparound arithmetic when @code{INT_MAX / 53 < hi}, because then the overflow in computing expressions like @code{hi * 53} can cause the expression @code{i <= hi} to yield a different value from the transformed expression @code{ic <= hic}. For this reason, compilers that use loop induction and similar techniques often do not support reliable wraparound arithmetic when a loop induction variable like @code{ic} is involved. Since loop induction variables are generated by the compiler, and are not visible in the source code, it is not always trivial to say whether the problem affects your code. Hardly any code actually depends on wraparound arithmetic in cases like these, so in practice these loop induction optimizations are almost always useful. However, edge cases in this area can cause problems. For example: @example int j; for (j = 1; 0 < j; j *= 2) test (j); @end example @noindent Here, the loop attempts to iterate through all powers of 2 that @code{int} can represent, but the C standard allows a compiler to optimize away the comparison and generate an infinite loop, under the argument that behavior is undefined on overflow. As of this writing this optimization is not done by any production version of GCC with @option{-O2}, but it might be performed by other compilers, or by more aggressive GCC optimization options, and the GCC developers have not decided whether it will continue to work with GCC and @option{-O2}. @node Signed Overflow Advice @subsection Practical Advice for Signed Overflow Issues @cindex integer overflow @cindex overflow, signed integer @cindex signed integer overflow @cindex wraparound arithmetic Ideally the safest approach is to avoid signed integer overflow entirely. For example, instead of multiplying two signed integers, you can convert them to unsigned integers, multiply the unsigned values, then test whether the result is in signed range. Rewriting code in this way will be inconvenient, though, particularly if the signed values might be negative. Also, it may hurt performance. Using unsigned arithmetic to check for overflow is particularly painful to do portably and efficiently when dealing with an integer type like @code{uid_t} whose width and signedness vary from platform to platform. Furthermore, many C applications pervasively assume wraparound behavior and typically it is not easy to find and remove all these assumptions. Hence it is often useful to maintain nonstandard code that assumes wraparound on overflow, instead of rewriting the code. The rest of this section attempts to give practical advice for this situation. If your code wants to detect signed integer overflow in @code{sum = a + b}, it is generally safe to use an expression like @code{(sum < a) != (b < 0)}. If your code uses a signed loop index, make sure that the index cannot overflow, along with all signed expressions derived from the index. Here is a contrived example of problematic code with two instances of overflow. @example for (i = INT_MAX - 10; i <= INT_MAX; i++) if (i + 1 < 0) @{ report_overflow (); break; @} @end example @noindent Because of the two overflows, a compiler might optimize away or transform the two comparisons in a way that is incompatible with the wraparound assumption. If your code uses an expression like @code{(i * 2000) / 1000} and you actually want the multiplication to wrap around on overflow, use unsigned arithmetic to do it, e.g., @code{((int) (i * 2000u)) / 1000}. If your code assumes wraparound behavior and you want to insulate it against any GCC optimizations that would fail to support that behavior, you should use GCC's @option{-fwrapv} option, which causes signed overflow to wrap around reliably (except for division and remainder, as discussed in the next section). If you need to port to platforms where signed integer overflow does not reliably wrap around (e.g., due to hardware overflow checking, or to highly aggressive optimizations), you should consider debugging with GCC's @option{-ftrapv} option, which causes signed overflow to raise an exception. @node Signed Integer Division @subsection Signed Integer Division and Integer Overflow @cindex division, integer Overflow in signed integer division is not always harmless: for example, on CPUs of the i386 family, dividing @code{INT_MIN} by @code{-1} yields a SIGFPE signal which by default terminates the program. Worse, taking the remainder of these two values typically yields the same signal on these CPUs, even though the C standard requires @code{INT_MIN % -1} to yield zero because the expression does not overflow. @node Preprocessor Arithmetic @section Preprocessor Arithmetic @cindex preprocessor arithmetic In C99 and later, preprocessor arithmetic, used for @code{#if} expressions, must be evaluated as if all signed values are of type @code{intmax_t} and all unsigned values of type @code{uintmax_t}. Many compilers are buggy in this area, though. For example, as of 2007, Sun C mishandles @code{#if LLONG_MIN < 0} on a platform with 32-bit @code{long int} and 64-bit @code{long long int}. Also, some older preprocessors mishandle constants ending in @code{LL}. To work around these problems, you can compute the value of expressions like @code{LONG_MAX < LLONG_MAX} at @code{configure}-time rather than at @code{#if}-time. @node Null Pointers @section Properties of Null Pointers @cindex null pointers Most modern hosts reliably fail when you attempt to dereference a null pointer. On almost all modern hosts, null pointers use an all-bits-zero internal representation, so you can reliably use @code{memset} with 0 to set all the pointers in an array to null values. If @code{p} is a null pointer to an object type, the C expression @code{p + 0} always evaluates to @code{p} on modern hosts, even though the standard says that it has undefined behavior. @node Buffer Overruns @section Buffer Overruns and Subscript Errors @cindex buffer overruns Buffer overruns and subscript errors are the most common dangerous errors in C programs. They result in undefined behavior because storing outside an array typically modifies storage that is used by some other object, and most modern systems lack runtime checks to catch these errors. Programs should not rely on buffer overruns being caught. There is one exception to the usual rule that a portable program cannot address outside an array. In C, it is valid to compute the address just past an object, e.g., @code{&a[N]} where @code{a} has @code{N} elements, so long as you do not dereference the resulting pointer. But it is not valid to compute the address just before an object, e.g., @code{&a[-1]}; nor is it valid to compute two past the end, e.g., @code{&a[N+1]}. On most platforms @code{&a[-1] < &a[0] && &a[N] < &a[N+1]}, but this is not reliable in general, and it is usually easy enough to avoid the potential portability problem, e.g., by allocating an extra unused array element at the start or end. @uref{https://@/www.valgrind.org/, Valgrind} can catch many overruns. GCC users might also consider using the @option{-fsanitize=} options to catch overruns. @xref{Instrumentation Options, , Program Instrumentation Options, gcc, Using the GNU Compiler Collection (GCC)}. Buffer overruns are usually caused by off-by-one errors, but there are more subtle ways to get them. Using @code{int} values to index into an array or compute array sizes causes problems on typical 64-bit hosts where an array index might be @math{2^{31}} or larger. Index values of type @code{size_t} avoid this problem, but cannot be negative. Index values of type @code{ptrdiff_t} are signed, and are wide enough in practice. If you add or multiply two numbers to calculate an array size, e.g., @code{malloc (x * sizeof y + z)}, havoc ensues if the addition or multiplication overflows. Many implementations of the @code{alloca} function silently misbehave and can generate buffer overflows if given sizes that are too large. The size limits are implementation dependent, but are at least 4000 bytes on all platforms that we know about. The standard functions @code{asctime}, @code{asctime_r}, @code{ctime}, @code{ctime_r}, and @code{gets} are prone to buffer overflows, and portable code should not use them unless the inputs are known to be within certain limits. The time-related functions can overflow their buffers if given timestamps out of range (e.g., a year less than -999 or greater than 9999). Time-related buffer overflows cannot happen with recent-enough versions of the GNU C library, but are possible with other implementations. The @code{gets} function is the worst, since it almost invariably overflows its buffer when presented with an input line larger than the buffer. @node Volatile Objects @section Volatile Objects @cindex volatile objects The keyword @code{volatile} is often misunderstood in portable code. Its use inhibits some memory-access optimizations, but programmers often wish that it had a different meaning than it actually does. @code{volatile} was designed for code that accesses special objects like memory-mapped device registers whose contents spontaneously change. Such code is inherently low-level, and it is difficult to specify portably what @code{volatile} means in these cases. The C standard says, ``What constitutes an access to an object that has volatile-qualified type is implementation-defined,'' so in theory each implementation is supposed to fill in the gap by documenting what @code{volatile} means for that implementation. In practice, though, this documentation is usually absent or incomplete. One area of confusion is the distinction between objects defined with volatile types, and volatile lvalues. From the C standard's point of view, an object defined with a volatile type has externally visible behavior. You can think of such objects as having little oscilloscope probes attached to them, so that the user can observe some properties of accesses to them, just as the user can observe data written to output files. However, the standard does not make it clear whether users can observe accesses by volatile lvalues to ordinary objects. For example: @example /* Declare and access a volatile object. Accesses to X are "visible" to users. */ static int volatile x; x = 1; /* Access two ordinary objects via a volatile lvalue. It's not clear whether accesses to *P are "visible". */ int y; int *z = malloc (sizeof (int)); int volatile *p; p = &y; *p = 1; p = z; *p = 1; @end example Programmers often wish that @code{volatile} meant ``Perform the memory access here and now, without merging several memory accesses, without changing the memory word size, and without reordering.'' But the C standard does not require this. For objects defined with a volatile type, accesses must be done before the next sequence point; but otherwise merging, reordering, and word-size change is allowed. Worse, it is not clear from the standard whether volatile lvalues provide more guarantees in general than nonvolatile lvalues, if the underlying objects are ordinary. Even when accessing objects defined with a volatile type, the C standard allows only extremely limited signal handlers: in C99 the behavior is undefined if a signal handler reads any non-local object, or writes to any non-local object whose type is not @code{sig_atomic_t volatile}, or calls any standard library function other than @code{abort}, @code{signal}, and @code{_Exit}. Hence C compilers need not worry about a signal handler disturbing ordinary computation. C11 and Posix allow some additional behavior in a portable signal handler, but are still quite restrictive. Some C implementations allow memory-access optimizations within each translation unit, such that actual behavior agrees with the behavior required by the standard only when calling a function in some other translation unit, and a signal handler acts like it was called from a different translation unit. The C99 standard hints that in these implementations, objects referred to by signal handlers ``would require explicit specification of @code{volatile} storage, as well as other implementation-defined restrictions.'' But unfortunately even for this special case these other restrictions are often not documented well. This area was significantly changed in C11, and eventually implementations will probably head in the C11 direction, but this will take some time. @xref{Volatiles, , When is a Volatile Object Accessed?, gcc, Using the GNU Compiler Collection (GCC)}, for some restrictions imposed by GCC. @xref{Defining Handlers, , Defining Signal Handlers, libc, The GNU C Library}, for some restrictions imposed by the GNU C library. Restrictions differ on other platforms. If possible, it is best to use a signal handler that fits within the limits imposed by the C and Posix standards. If this is not practical, you can try the following rules of thumb. A signal handler should access only volatile lvalues, preferably lvalues that refer to objects defined with a volatile type, and should not assume that the accessed objects have an internally consistent state if they are larger than a machine word. Furthermore, installers should employ compilers and compiler options that are commonly used for building operating system kernels, because kernels often need more from @code{volatile} than the C Standard requires, and installers who compile an application in a similar environment can sometimes benefit from the extra constraints imposed by kernels on compilers. Admittedly we are hand-waving somewhat here, as there are few guarantees in this area; the rules of thumb may help to fix some bugs but there is a good chance that they will not fix them all. For @code{volatile}, C++ has the same problems that C does. Multithreaded applications have even more problems with @code{volatile}, but they are beyond the scope of this section. The bottom line is that using @code{volatile} typically hurts performance but should not hurt correctness. In some cases its use does help correctness, but these cases are often so poorly understood that all too often adding @code{volatile} to a data structure merely alleviates some symptoms of a bug while not fixing the bug in general. @node Floating Point Portability @section Floating Point Portability @cindex floating point Almost all modern systems use IEEE-754 floating point, and it is safe to assume IEEE-754 in most portable code these days. For more information, please see David Goldberg's classic paper @uref{http://@/www.validlab.com/@/goldberg/@/paper.pdf, What Every Computer Scientist Should Know About Floating-Point Arithmetic}. @node Exiting Portably @section Exiting Portably @cindex exiting portably A C or C++ program can exit with status @var{N} by returning @var{N} from the @code{main} function. Portable programs are supposed to exit either with status 0 or @code{EXIT_SUCCESS} to succeed, or with status @code{EXIT_FAILURE} to fail, but in practice it is portable to fail by exiting with status 1, and test programs that assume Posix can fail by exiting with status values from 1 through 255. Programs on SunOS 2.0 (1985) through 3.5.2 (1988) incorrectly exited with zero status when @code{main} returned nonzero, but ancient systems like these are no longer of practical concern. A program can also exit with status @var{N} by passing @var{N} to the @code{exit} function, and a program can fail by calling the @code{abort} function. If a program is specialized to just some platforms, it can fail by calling functions specific to those platforms, e.g., @code{_exit} (Posix). However, like other functions, an exit function should be declared, typically by including a header. For example, if a C program calls @code{exit}, it should include @file{stdlib.h} either directly or via the default includes (@pxref{Default Includes}). A program can fail due to undefined behavior such as dereferencing a null pointer, but this is not recommended as undefined behavior allows an implementation to do whatever it pleases and this includes exiting successfully. @c ================================================== Manual Configuration @node Manual Configuration @chapter Manual Configuration A few kinds of features can't be guessed automatically by running test programs. For example, the details of the object-file format, or special options that need to be passed to the compiler or linker. Autoconf provides a uniform method for handling unguessable features, by giving each operating system a @dfn{canonical system type}, also known as a @dfn{canonical name} or @dfn{target triplet}. @prindex @command{config.guess} @prindex @command{config.sub} If you use any of the macros described in this chapter, you must distribute the helper scripts @command{config.guess} and @command{config.sub} along with your source code. Some Autoconf macros use these macros internally, so you may need to distribute these scripts even if you do not use any of these macros yourself. @xref{Input}, for information about the @code{AC_CONFIG_AUX_DIR} macro which you can use to control in which directory @command{configure} looks for helper scripts, and where to get the scripts from. @menu * Specifying Target Triplets:: Specifying target triplets * Canonicalizing:: Getting the canonical system type * Using System Type:: What to do with the system type @end menu @node Specifying Target Triplets @section Specifying target triplets @cindex System type @cindex Target triplet @c This node used to be named Specifying Names. The @anchor allows old @c links to still work. @anchor{Specifying Names} Autoconf-generated @command{configure} scripts can make decisions based on a canonical name for the system type, or @dfn{target triplet}, which has the form: @samp{@var{cpu}-@var{vendor}-@var{os}}, where @var{os} can be @samp{@var{system}} or @samp{@var{kernel}-@var{system}} @command{configure} can usually guess the canonical name for the type of system it's running on. To do so it runs a script called @command{config.guess}, which infers the name using the @code{uname} command or symbols predefined by the C preprocessor. Alternately, the user can specify the system type with command line arguments to @command{configure} (@pxref{System Type}. Doing so is necessary when cross-compiling. In the most complex case of cross-compiling, three system types are involved. The options to specify them are: @table @option @item --build=@var{build-type} the type of system on which the package is being configured and compiled. It defaults to the result of running @command{config.guess}. Specifying a @var{build-type} that differs from @var{host-type} enables cross-compilation mode. @item --host=@var{host-type} the type of system on which the package runs. By default it is the same as the build machine. The tools that get used to build and manipulate binaries will, by default, all be prefixed with @code{@var{host-type}-}, such as @code{@var{host-type}-gcc}, @code{@var{host-type}-g++}, @code{@var{host-type}-ar}, and @code{@var{host-type}-nm}. If the binaries produced by these tools can be executed by the build system, the configure script will make use of it in @code{AC_RUN_IFELSE} invocations; otherwise, cross-compilation mode is enabled. Specifying a @var{host-type} that differs from @var{build-type}, when @var{build-type} was also explicitly specified, equally enables cross-compilation mode. @item --target=@var{target-type} the type of system for which any compiler tools in the package produce code (rarely needed). By default, it is the same as host. @end table If you mean to override the result of @command{config.guess} but still produce binaries for the build machine, use @option{--build}, not @option{--host}. So, for example, to produce binaries for 64-bit MinGW, use a command like this: @example ./configure --host=x86_64-w64-mingw64 @end example If your system has the ability to execute MinGW binaries but you don't want to make use of this feature and instead prefer cross-compilation guesses, use a command like this: @example ./configure --build=x86_64-pc-linux-gnu --host=x86_64-w64-mingw64 @end example @noindent Note that if you do not specify @option{--host}, @command{configure} fails if it can't run the code generated by the specified compiler. For example, configuring as follows fails: @example ./configure CC=x86_64-w64-mingw64-gcc @end example When cross-compiling, @command{configure} will warn about any tools (compilers, linkers, assemblers) whose name is not prefixed with the host type. This is an aid to users performing cross-compilation. Continuing the example above, if a cross-compiler named @command{cc} is used with a native @command{pkg-config}, then libraries found by @command{pkg-config} will likely cause subtle build failures; but using the names @command{x86_64-w64-mingw64-gcc} and @command{x86_64-w64-mingw64-pkg-config} avoids any confusion. Avoiding the warning is as simple as creating the correct symlinks naming the cross tools. @cindex @command{config.sub} @command{configure} recognizes short aliases for many system types; for example, @samp{decstation} can be used instead of @samp{mips-dec-ultrix4.2}. @command{configure} runs a script called @command{config.sub} to canonicalize system type aliases. This section deliberately omits the description of the obsolete interface; see @ref{Hosts and Cross-Compilation}. @node Canonicalizing @section Getting the Canonical System Type @cindex System type @cindex Canonical system type The following macros make the system type available to @command{configure} scripts. @ovindex build_alias @ovindex host_alias @ovindex target_alias The variables @samp{build_alias}, @samp{host_alias}, and @samp{target_alias} are always exactly the arguments of @option{--build}, @option{--host}, and @option{--target}; in particular, they are left empty if the user did not use them, even if the corresponding @code{AC_CANONICAL} macro was run. Any configure script may use these variables anywhere. These are the variables that should be used when in interaction with the user. If you need to recognize some special environments based on their system type, run the following macros to get canonical system names. These variables are not set before the macro call. @defmac AC_CANONICAL_BUILD @acindex{CANONICAL_BUILD} @ovindex build @ovindex build_cpu @ovindex build_vendor @ovindex build_os Compute the canonical build-system type variable, @code{build}, and its three individual parts @code{build_cpu}, @code{build_vendor}, and @code{build_os}. If @option{--build} was specified, then @code{build} is the canonicalization of @code{build_alias} by @command{config.sub}, otherwise it is determined by the shell script @command{config.guess}. @end defmac @defmac AC_CANONICAL_HOST @acindex{CANONICAL_HOST} @ovindex host @ovindex host_cpu @ovindex host_vendor @ovindex host_os Compute the canonical host-system type variable, @code{host}, and its three individual parts @code{host_cpu}, @code{host_vendor}, and @code{host_os}. If @option{--host} was specified, then @code{host} is the canonicalization of @code{host_alias} by @command{config.sub}, otherwise it defaults to @code{build}. @end defmac @defmac AC_CANONICAL_TARGET @acindex{CANONICAL_TARGET} @ovindex target @ovindex target_cpu @ovindex target_vendor @ovindex target_os Compute the canonical target-system type variable, @code{target}, and its three individual parts @code{target_cpu}, @code{target_vendor}, and @code{target_os}. If @option{--target} was specified, then @code{target} is the canonicalization of @code{target_alias} by @command{config.sub}, otherwise it defaults to @code{host}. @end defmac Note that there can be artifacts due to the backward compatibility code. @xref{Hosts and Cross-Compilation}, for more. @node Using System Type @section Using the System Type In @file{configure.ac} the system type is generally used by one or more @code{case} statements to select system-specifics. Shell wildcards can be used to match a group of system types. For example, an extra assembler code object file could be chosen, giving access to a CPU cycle counter register. @code{$(CYCLE_OBJ)} in the following would be used in a makefile to add the object to a program or library. @example AS_CASE([$host], [alpha*-*-*], [CYCLE_OBJ=rpcc.o], [i?86-*-*], [CYCLE_OBJ=rdtsc.o], [CYCLE_OBJ=""] ) AC_SUBST([CYCLE_OBJ]) @end example @code{AC_CONFIG_LINKS} (@pxref{Configuration Links}) is another good way to select variant source files, for example optimized code for some CPUs. The configured CPU type doesn't always indicate exact CPU types, so some runtime capability checks may be necessary too. @example case $host in alpha*-*-*) AC_CONFIG_LINKS([dither.c:alpha/dither.c]) ;; powerpc*-*-*) AC_CONFIG_LINKS([dither.c:powerpc/dither.c]) ;; *-*-*) AC_CONFIG_LINKS([dither.c:generic/dither.c]) ;; esac @end example The host system type can also be used to find cross-compilation tools with @code{AC_CHECK_TOOL} (@pxref{Generic Programs}). The above examples all show @samp{$host}, since this is where the code is going to run. Only rarely is it necessary to test @samp{$build} (which is where the build is being done). Whenever you're tempted to use @samp{$host} it's worth considering whether some sort of probe would be better. New system types come along periodically or previously missing features are added. Well-written probes can adapt themselves to such things, but hard-coded lists of names can't. Here are some guidelines, @itemize @bullet @item Availability of libraries and library functions should always be checked by probing. @item Variant behavior of system calls is best identified with runtime tests if possible, but bug workarounds or obscure difficulties might have to be driven from @samp{$host}. @item Assembler code is inevitably highly CPU-specific and is best selected according to @samp{$host_cpu}. @item Assembler variations like underscore prefix on globals or ELF versus COFF type directives are however best determined by probing, perhaps even examining the compiler output. @end itemize @samp{$target} is for use by a package creating a compiler or similar. For ordinary packages it's meaningless and should not be used. It indicates what the created compiler should generate code for, if it can cross-compile. @samp{$target} generally selects various hard-coded CPU and system conventions, since usually the compiler or tools under construction themselves determine how the target works. @c ===================================================== Site Configuration. @node Site Configuration @chapter Site Configuration @command{configure} scripts support several kinds of local configuration decisions. There are ways for users to specify where external software packages are, include or exclude optional features, install programs under modified names, and set default values for @command{configure} options. @menu * Help Formatting:: Customizing @samp{configure --help} * External Software:: Working with other optional software * Package Options:: Selecting optional features * Pretty Help Strings:: Formatting help string * Option Checking:: Controlling checking of @command{configure} options * Site Details:: Configuring site details * Transforming Names:: Changing program names when installing * Site Defaults:: Giving @command{configure} local defaults @end menu @node Help Formatting @section Controlling Help Output Users consult @samp{configure --help} to learn of configuration decisions specific to your package. By default, @command{configure} breaks this output into sections for each type of option; within each section, help strings appear in the order @file{configure.ac} defines them: @example Optional Features: @dots{} --enable-bar include bar Optional Packages: @dots{} --with-foo use foo @end example @defmac AC_PRESERVE_HELP_ORDER @acindex{PRESERVE_HELP_ORDER} Request an alternate @option{--help} format, in which options of all types appear together, in the order defined. Call this macro before any @code{AC_ARG_ENABLE} or @code{AC_ARG_WITH}. @example Optional Features and Packages: @dots{} --enable-bar include bar --with-foo use foo @end example @end defmac @node External Software @section Working With External Software @cindex External software Some packages require, or can optionally use, other software packages that are already installed. The user can give @command{configure} command line options to specify which such external software to use. The options have one of these forms: @c FIXME: Can't use @ovar here, Texinfo 4.0 goes lunatic and emits something @c awful. @example --with-@var{package}@r{[}=@var{arg}@r{]} --without-@var{package} @end example For example, @option{--with-gnu-ld} means work with the GNU linker instead of some other linker. @option{--with-x} means work with The X Window System. The user can give an argument by following the package name with @samp{=} and the argument. Giving an argument of @samp{no} is for packages that are used by default; it says to @emph{not} use the package. An argument that is neither @samp{yes} nor @samp{no} could include a name or number of a version of the other package, to specify more precisely which other package this program is supposed to work with. If no argument is given, it defaults to @samp{yes}. @option{--without-@var{package}} is equivalent to @option{--with-@var{package}=no}. Normally @command{configure} scripts complain about @option{--with-@var{package}} options that they do not support. @xref{Option Checking}, for details, and for how to override the defaults. For each external software package that may be used, @file{configure.ac} should call @code{AC_ARG_WITH} to detect whether the @command{configure} user asked to use it. Whether each package is used or not by default, and which arguments are valid, is up to you. @anchor{AC_ARG_WITH} @defmac AC_ARG_WITH (@var{package}, @var{help-string}, @ @ovar{action-if-given}, @ovar{action-if-not-given}) @acindex{ARG_WITH} If the user gave @command{configure} the option @option{--with-@var{package}} or @option{--without-@var{package}}, run shell commands @var{action-if-given}. If neither option was given, run shell commands @var{action-if-not-given}. The name @var{package} indicates another software package that this program should work with. It should consist only of alphanumeric characters, dashes, plus signs, and dots. The option's argument is available to the shell commands @var{action-if-given} in the shell variable @code{withval}, which is actually just the value of the shell variable named @code{with_@var{package}}, with any non-alphanumeric characters in @var{package} changed into @samp{_}. You may use that variable instead, if you wish. Note that @var{action-if-not-given} is not expanded until the point that @code{AC_ARG_WITH} was expanded. If you need the value of @code{with_@var{package}} set to a default value by the time argument parsing is completed, use @code{m4_divert_text} to the @code{DEFAULTS} diversion (@pxref{m4_divert_text}) (if done as an argument to @code{AC_ARG_WITH}, also provide non-diverted text to avoid a shell syntax error). The argument @var{help-string} is a description of the option that looks like this: @example --with-readline support fancy command line editing @end example @noindent @var{help-string} may be more than one line long, if more detail is needed. Just make sure the columns line up in @samp{configure --help}. Avoid tabs in the help string. The easiest way to provide the proper leading whitespace is to format your @var{help-string} with the macro @code{AS_HELP_STRING} (@pxref{Pretty Help Strings}). The following example shows how to use the @code{AC_ARG_WITH} macro in a common situation. You want to let the user decide whether to enable support for an external library (e.g., the readline library); if the user specified neither @option{--with-readline} nor @option{--without-readline}, you want to enable support for readline only if the library is available on the system. @c FIXME: Remove AS_IF when the problem of AC_REQUIRE within `if' is solved. @example AC_ARG_WITH([readline], [AS_HELP_STRING([--with-readline], [support fancy command line editing @@<:@@default=check@@:>@@])], [], [: m4_divert_text([DEFAULTS], [with_readline=check])]) LIBREADLINE= AS_IF([test "x$with_readline" != xno], [AC_CHECK_LIB([readline], [main], [AC_SUBST([LIBREADLINE], ["-lreadline -lncurses"]) AC_DEFINE([HAVE_LIBREADLINE], [1], [Define if you have libreadline]) ], [if test "x$with_readline" != xcheck; then AC_MSG_FAILURE( [--with-readline was given, but test for readline failed]) fi ], -lncurses)]) @end example The next example shows how to use @code{AC_ARG_WITH} to give the user the possibility to enable support for the readline library, in case it is still experimental and not well tested, and is therefore disabled by default. @c FIXME: Remove AS_IF when the problem of AC_REQUIRE within `if' is solved. @example AC_ARG_WITH([readline], [AS_HELP_STRING([--with-readline], [enable experimental support for readline])], [], [with_readline=no]) LIBREADLINE= AS_IF([test "x$with_readline" != xno], [AC_CHECK_LIB([readline], [main], [AC_SUBST([LIBREADLINE], ["-lreadline -lncurses"]) AC_DEFINE([HAVE_LIBREADLINE], [1], [Define if you have libreadline]) ], [AC_MSG_FAILURE( [--with-readline was given, but test for readline failed])], [-lncurses])]) @end example The last example shows how to use @code{AC_ARG_WITH} to give the user the possibility to disable support for the readline library, given that it is an important feature and that it should be enabled by default. @c FIXME: Remove AS_IF when the problem of AC_REQUIRE within `if' is solved. @example AC_ARG_WITH([readline], [AS_HELP_STRING([--without-readline], [disable support for readline])], [], [with_readline=yes]) LIBREADLINE= AS_IF([test "x$with_readline" != xno], [AC_CHECK_LIB([readline], [main], [AC_SUBST([LIBREADLINE], ["-lreadline -lncurses"]) AC_DEFINE([HAVE_LIBREADLINE], [1], [Define if you have libreadline]) ], [AC_MSG_FAILURE( [readline test failed (--without-readline to disable)])], [-lncurses])]) @end example These three examples can be easily adapted to the case where @code{AC_ARG_ENABLE} should be preferred to @code{AC_ARG_WITH} (see @ref{Package Options}). @end defmac @node Package Options @section Choosing Package Options @cindex Package options @cindex Options, package If a software package has optional compile-time features, the user can give @command{configure} command line options to specify whether to compile them. The options have one of these forms: @c FIXME: Can't use @ovar here, Texinfo 4.0 goes lunatic and emits something @c awful. @example --enable-@var{feature}@r{[}=@var{arg}@r{]} --disable-@var{feature} @end example These options allow users to choose which optional features to build and install. @option{--enable-@var{feature}} options should never make a feature behave differently or cause one feature to replace another. They should only cause parts of the program to be built rather than left out. The user can give an argument by following the feature name with @samp{=} and the argument. Giving an argument of @samp{no} requests that the feature @emph{not} be made available. A feature with an argument looks like @option{--enable-debug=stabs}. If no argument is given, it defaults to @samp{yes}. @option{--disable-@var{feature}} is equivalent to @option{--enable-@var{feature}=no}. Normally @command{configure} scripts complain about @option{--enable-@var{package}} options that they do not support. @xref{Option Checking}, for details, and for how to override the defaults. For each optional feature, @file{configure.ac} should call @code{AC_ARG_ENABLE} to detect whether the @command{configure} user asked to include it. Whether each feature is included or not by default, and which arguments are valid, is up to you. @anchor{AC_ARG_ENABLE} @defmac AC_ARG_ENABLE (@var{feature}, @var{help-string}, @ @ovar{action-if-given}, @ovar{action-if-not-given}) @acindex{ARG_ENABLE} If the user gave @command{configure} the option @option{--enable-@var{feature}} or @option{--disable-@var{feature}}, run shell commands @var{action-if-given}. If neither option was given, run shell commands @var{action-if-not-given}. The name @var{feature} indicates an optional user-level facility. It should consist only of alphanumeric characters, dashes, plus signs, and dots. The option's argument is available to the shell commands @var{action-if-given} in the shell variable @code{enableval}, which is actually just the value of the shell variable named @code{enable_@var{feature}}, with any non-alphanumeric characters in @var{feature} changed into @samp{_}. You may use that variable instead, if you wish. The @var{help-string} argument is like that of @code{AC_ARG_WITH} (@pxref{External Software}). Note that @var{action-if-not-given} is not expanded until the point that @code{AC_ARG_ENABLE} was expanded. If you need the value of @code{enable_@var{feature}} set to a default value by the time argument parsing is completed, use @code{m4_divert_text} to the @code{DEFAULTS} diversion (@pxref{m4_divert_text}) (if done as an argument to @code{AC_ARG_ENABLE}, also provide non-diverted text to avoid a shell syntax error). You should format your @var{help-string} with the macro @code{AS_HELP_STRING} (@pxref{Pretty Help Strings}). See the examples suggested with the definition of @code{AC_ARG_WITH} (@pxref{External Software}) to get an idea of possible applications of @code{AC_ARG_ENABLE}. @end defmac @node Pretty Help Strings @section Making Your Help Strings Look Pretty @cindex Help strings Properly formatting the @samp{help strings} which are used in @code{AC_ARG_WITH} (@pxref{External Software}) and @code{AC_ARG_ENABLE} (@pxref{Package Options}) can be challenging. Specifically, you want your own @samp{help strings} to line up in the appropriate columns of @samp{configure --help} just like the standard Autoconf @samp{help strings} do. This is the purpose of the @code{AS_HELP_STRING} macro. @anchor{AS_HELP_STRING} @defmac AS_HELP_STRING (@var{left-hand-side}, @var{right-hand-side} @ @dvar{indent-column, 26}, @dvar{wrap-column, 79}) @asindex{HELP_STRING} Expands into a help string that looks pretty when the user executes @samp{configure --help}. It is typically used in @code{AC_ARG_WITH} (@pxref{External Software}) or @code{AC_ARG_ENABLE} (@pxref{Package Options}). The following example makes this clearer. @example AC_ARG_WITH([foo], [AS_HELP_STRING([--with-foo], [use foo (default is no)])], [use_foo=$withval], [use_foo=no]) @end example Then the last few lines of @samp{configure --help} appear like this: @example --enable and --with options recognized: --with-foo use foo (default is no) @end example Macro expansion is performed on the first argument. However, the second argument of @code{AS_HELP_STRING} is treated as a whitespace separated list of text to be reformatted, and is not subject to macro expansion. Since it is not expanded, it should not be double quoted. @xref{Autoconf Language}, for a more detailed explanation. The @code{AS_HELP_STRING} macro is particularly helpful when the @var{left-hand-side} and/or @var{right-hand-side} are composed of macro arguments, as shown in the following example. Be aware that @var{left-hand-side} may not expand to unbalanced quotes, although quadrigraphs can be used. @example AC_DEFUN([MY_ARG_WITH], [AC_ARG_WITH(m4_translit([[$1]], [_], [-]), [AS_HELP_STRING([--with-m4_translit([$1], [_], [-])], [use $1 (default is $2)])], [use_[]$1=$withval], [use_[]$1=$2])]) MY_ARG_WITH([a_b], [no]) @end example @noindent Here, the last few lines of @samp{configure --help} will include: @example --enable and --with options recognized: --with-a-b use a_b (default is no) @end example The parameters @var{indent-column} and @var{wrap-column} were introduced in Autoconf 2.62. Generally, they should not be specified; they exist for fine-tuning of the wrapping. @example AS_HELP_STRING([--option], [description of option]) @result{} --option description of option AS_HELP_STRING([--option], [description of option], [15], [30]) @result{} --option description of @result{} option @end example @end defmac @node Option Checking @section Controlling Checking of @command{configure} Options @cindex Options, Package The @command{configure} script checks its command-line options against a list of known options, like @option{--help} or @option{--config-cache}. An unknown option ordinarily indicates a mistake by the user and @command{configure} halts with an error. However, by default unknown @option{--with-@var{package}} and @option{--enable-@var{feature}} options elicit only a warning, to support configuring entire source trees. Source trees often contain multiple packages with a top-level @command{configure} script that uses the @code{AC_CONFIG_SUBDIRS} macro (@pxref{Subdirectories}). Because the packages generally support different @option{--with-@var{package}} and @option{--enable-@var{feature}} options, the GNU Coding Standards say they must accept unrecognized options without halting. Even a warning message is undesirable here, so @code{AC_CONFIG_SUBDIRS} automatically disables the warnings. This default behavior may be modified in two ways. First, the installer can invoke @code{configure --disable-option-checking} to disable these warnings, or invoke @code{configure --enable-option-checking=fatal} options to turn them into fatal errors, respectively. Second, the maintainer can use @code{AC_DISABLE_OPTION_CHECKING}. @defmac AC_DISABLE_OPTION_CHECKING @acindex{DISABLE_OPTION_CHECKING} By default, disable warnings related to any unrecognized @option{--with-@var{package}} or @option{--enable-@var{feature}} options. This is implied by @code{AC_CONFIG_SUBDIRS}. The installer can override this behavior by passing @option{--enable-option-checking} (enable warnings) or @option{--enable-option-checking=fatal} (enable errors) to @command{configure}. @end defmac @node Site Details @section Configuring Site Details @cindex Site details Some software packages require complex site-specific information. Some examples are host names to use for certain services, company names, and email addresses to contact. Since some configuration scripts generated by Metaconfig ask for such information interactively, people sometimes wonder how to get that information in Autoconf-generated configuration scripts, which aren't interactive. Such site configuration information should be put in a file that is edited @emph{only by users}, not by programs. The location of the file can either be based on the @code{prefix} variable, or be a standard location such as the user's home directory. It could even be specified by an environment variable. The programs should examine that file at runtime, rather than at compile time. Runtime configuration is more convenient for users and makes the configuration process simpler than getting the information while configuring. @xref{Directory Variables, , Variables for Installation Directories, standards, The GNU Coding Standards}, for more information on where to put data files. @node Transforming Names @section Transforming Program Names When Installing @cindex Transforming program names @cindex Program names, transforming Autoconf supports changing the names of programs when installing them. In order to use these transformations, @file{configure.ac} must call the macro @code{AC_ARG_PROGRAM}. @defmac AC_ARG_PROGRAM @acindex{ARG_PROGRAM} @ovindex program_transform_name Place in output variable @code{program_transform_name} a sequence of @code{sed} commands for changing the names of installed programs. If any of the options described below are given to @command{configure}, program names are transformed accordingly. Otherwise, if @code{AC_CANONICAL_TARGET} has been called and a @option{--target} value is given, the target type followed by a dash is used as a prefix. Otherwise, no program name transformation is done. @end defmac @menu * Transformation Options:: @command{configure} options to transform names * Transformation Examples:: Sample uses of transforming names * Transformation Rules:: Makefile uses of transforming names @end menu @node Transformation Options @subsection Transformation Options You can specify name transformations by giving @command{configure} these command line options: @table @option @item --program-prefix=@var{prefix} prepend @var{prefix} to the names; @item --program-suffix=@var{suffix} append @var{suffix} to the names; @item --program-transform-name=@var{expression} perform @code{sed} substitution @var{expression} on the names. @end table @node Transformation Examples @subsection Transformation Examples These transformations are useful with programs that can be part of a cross-compilation development environment. For example, a cross-assembler running on x86-64 configured with @option{--target=aarch64-linux-gnu} is normally installed as @file{aarch64-linux-gnu-as}, rather than @file{as}, which could be confused with a native x86-64 assembler. You can force a program name to begin with @file{g}, if you don't want GNU programs installed on your system to shadow other programs with the same name. For example, if you configure GNU @code{diff} with @option{--program-prefix=g}, then when you run @samp{make install} it is installed as @file{/usr/local/bin/gdiff}. As a more sophisticated example, you could use @example --program-transform-name='s/^/g/; s/^gg/g/; s/^gless/less/' @end example @noindent to prepend @samp{g} to most of the program names in a source tree, excepting those like @code{gdb} that already have one and those like @code{less} and @code{lesskey} that aren't GNU programs. (That is assuming that you have a source tree containing those programs that is set up to use this feature.) One way to install multiple versions of some programs simultaneously is to append a version number to the name of one or both. For example, if you want to keep Autoconf version 1 around for awhile, you can configure Autoconf version 2 using @option{--program-suffix=2} to install the programs as @file{/usr/local/bin/autoconf2}, @file{/usr/local/bin/autoheader2}, etc. Nevertheless, pay attention that only the binaries are renamed, therefore you'd have problems with the library files which might overlap. @node Transformation Rules @subsection Transformation Rules Here is how to use the variable @code{program_transform_name} in a @file{Makefile.in}: @example PROGRAMS = cp ls rm transform = @@program_transform_name@@ install: for p in $(PROGRAMS); do \ $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p | \ sed '$(transform)'`; \ done uninstall: for p in $(PROGRAMS); do \ rm -f $(DESTDIR)$(bindir)/`echo $$p | sed '$(transform)'`; \ @c $$ restore font-lock done @end example It is guaranteed that @code{program_transform_name} is never empty, and that there are no useless separators. Therefore you may safely embed @code{program_transform_name} within a sed program using @samp{;}: @example transform = @@program_transform_name@@ transform_exe = s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/ @end example Whether to do the transformations on documentation files (Texinfo or @code{man}) is a tricky question; there seems to be no perfect answer, due to the several reasons for name transforming. Documentation is not usually particular to a specific architecture, and Texinfo files do not conflict with system documentation. But they might conflict with earlier versions of the same files, and @code{man} pages sometimes do conflict with system documentation. As a compromise, it is probably best to do name transformations on @code{man} pages but not on Texinfo manuals. @node Site Defaults @section Setting Site Defaults @cindex Site defaults @cindex config.site Autoconf-generated @command{configure} scripts allow your site to provide default values for some configuration values. You do this by creating site- and system-wide initialization files. @evindex CONFIG_SITE If the environment variable @code{CONFIG_SITE} is set, @command{configure} uses its value as the name of a shell script to read; it is recommended that this be an absolute file name. Otherwise, it reads the shell script @file{@var{prefix}/share/config.site} if it exists, then @file{@var{prefix}/etc/config.site} if it exists. Thus, settings in machine-specific files override those in machine-independent ones in case of conflict. Site files can be arbitrary shell scripts, but only certain kinds of code are really appropriate to be in them. Because @command{configure} reads any cache file after it has read any site files, a site file can define a default cache file to be shared between all Autoconf-generated @command{configure} scripts run on that system (@pxref{Cache Files}). If you set a default cache file in a site file, it is a good idea to also set the output variable @code{CC} in that site file, because the cache file is only valid for a particular compiler, but many systems have several available. You can examine or override the value set by a command line option to @command{configure} in a site file; options set shell variables that have the same names as the options, with any dashes turned into underscores. The exceptions are that @option{--without-} and @option{--disable-} options are like giving the corresponding @option{--with-} or @option{--enable-} option and the value @samp{no}. Thus, @option{--cache-file=localcache} sets the variable @code{cache_file} to the value @samp{localcache}; @option{--enable-warnings=no} or @option{--disable-warnings} sets the variable @code{enable_warnings} to the value @samp{no}; @option{--prefix=/usr} sets the variable @code{prefix} to the value @samp{/usr}; etc. Site files are also good places to set default values for other output variables, such as @code{CFLAGS}, if you need to give them non-default values: anything you would normally do, repetitively, on the command line. If you use non-default values for @var{prefix} or @var{exec_prefix} (wherever you locate the site file), you can set them in the site file if you specify it with the @code{CONFIG_SITE} environment variable. You can set some cache values in the site file itself. Doing this is useful if you are cross-compiling, where it is impossible to check features that require running a test program. You could ``prime the cache'' by setting those values correctly for that system in @file{@var{prefix}/etc/config.site}. To find out the names of the cache variables you need to set, see the documentation of the respective Autoconf macro. If the variables or their semantics are undocumented, you may need to look for shell variables with @samp{_cv_} in their names in the affected @command{configure} scripts, or in the Autoconf M4 source code for those macros; but in that case, their name or semantics may change in a future Autoconf version. The cache file is careful to not override any variables set in the site files. Similarly, you should not override command-line options in the site files. Your code should check that variables such as @code{prefix} and @code{cache_file} have their default values (as set near the top of @command{configure}) before changing them. Here is a sample file @file{/usr/share/local/@/gnu/share/@/config.site}. The command @samp{configure --prefix=/usr/share/local/gnu} would read this file (if @code{CONFIG_SITE} is not set to a different file). @example # /usr/share/local/gnu/share/config.site for configure # # Change some defaults. test "$prefix" = NONE && prefix=/usr/share/local/gnu test "$exec_prefix" = NONE && exec_prefix=/usr/local/gnu test "$sharedstatedir" = '$@{prefix@}/com' && sharedstatedir=/var test "$localstatedir" = '$@{prefix@}/var' && localstatedir=/var test "$runstatedir" = '$@{localstatedir@}/run' && runstatedir=/run # Give Autoconf 2.x generated configure scripts a shared default # cache file for feature test results, architecture-specific. if test "$cache_file" = /dev/null; then cache_file="$prefix/var/config.cache" # A cache file is only valid for one C compiler. CC=gcc fi @end example @c Leave this use of "File system" rendered as one word, but @c slightly obfuscated so as not to trigger the syntax-check prohibition. @cindex File@/system Hierarchy Standard @cindex FHS Another use of @file{config.site} is for priming the directory variables @c "File system", but slightly obfuscated, as above. in a manner consistent with the File@/system Hierarchy Standard (FHS). Once the following file is installed at @file{/usr/share/config.site}, a user can execute simply @code{./configure --prefix=/usr} to get all the directories chosen in the locations recommended by FHS. @example # /usr/share/config.site for FHS defaults when installing below /usr, # and the respective settings were not changed on the command line. if test "$prefix" = /usr; then test "$sysconfdir" = '$@{prefix@}/etc' && sysconfdir=/etc test "$sharedstatedir" = '$@{prefix@}/com' && sharedstatedir=/var test "$localstatedir" = '$@{prefix@}/var' && localstatedir=/var fi @end example @cindex @file{lib64} @cindex 64-bit libraries Likewise, on platforms where 64-bit libraries are built by default, then installed in @file{/usr/local/@/lib64} instead of @file{/usr/local/@/lib}, it is appropriate to install @file{/usr/local/@/share/config.site}: @example # /usr/local/share/config.site for platforms that prefer # the directory /usr/local/lib64 over /usr/local/lib. test "$libdir" = '$@{exec_prefix@}/lib' && libdir='$@{exec_prefix@}/lib64' @end example @c ============================================== Running configure Scripts. @node Running configure Scripts @chapter Running @command{configure} Scripts @cindex @command{configure} Below are instructions on how to configure a package that uses a @command{configure} script, suitable for inclusion as an @file{INSTALL} file in the package. A plain-text version of @file{INSTALL} which you may use comes with Autoconf. @menu * Basic Installation:: Instructions for typical cases * Compilers and Options:: Selecting compilers and optimization * Multiple Architectures:: Compiling for multiple architectures at once * Installation Names:: Installing in different directories * Optional Features:: Selecting optional features * Particular Systems:: Particular systems * System Type:: Specifying the system type * Sharing Defaults:: Setting site-wide defaults for @command{configure} * Defining Variables:: Specifying the compiler etc. * configure Invocation:: Changing how @command{configure} runs @end menu @set autoconf @include install.texi @c ============================================== config.status Invocation @node config.status Invocation @chapter config.status Invocation @cindex @command{config.status} The @command{configure} script creates a file named @file{config.status}, which actually configures, @dfn{instantiates}, the template files. It also records the configuration options that were specified when the package was last configured in case reconfiguring is needed. Synopsis: @example ./config.status @ovar{option}@dots{} @ovar{tag}@dots{} @end example It configures each @var{tag}; if none are specified, all the templates are instantiated. A @var{tag} refers to a file or other tag associated with a configuration action, as specified by an @code{AC_CONFIG_@var{ITEMS}} macro (@pxref{Configuration Actions}). The files must be specified without their dependencies, as in @example ./config.status foobar @end example @noindent not @example ./config.status foobar:foo.in:bar.in @end example The supported options are: @table @option @item --help @itemx -h Print a summary of the command line options, the list of the template files, and exit. @item --version @itemx -V Print the version number of Autoconf and the configuration settings, and exit. @item --config Print the configuration settings in reusable way, quoted for the shell, and exit. For example, for a debugging build that otherwise reuses the configuration from a different build directory @var{build-dir} of a package in @var{src-dir}, you could use the following: @example args=`@var{build-dir}/config.status --config` eval @var{src-dir}/configure "$args" CFLAGS=-g --srcdir=@var{src-dir} @end example @noindent Note that it may be necessary to override a @option{--srcdir} setting that was saved in the configuration, if the arguments are used in a different build directory. @item --silent @itemx --quiet @itemx -q Do not print progress messages. @item --debug @itemx -d Don't remove the temporary files. @item --file=@var{file}[:@var{template}] Require that @var{file} be instantiated as if @samp{AC_CONFIG_FILES(@var{file}:@var{template})} was used. Both @var{file} and @var{template} may be @samp{-} in which case the standard output and/or standard input, respectively, is used. If a @var{template} file name is relative, it is first looked for in the build tree, and then in the source tree. @xref{Configuration Actions}, for more details. This option and the following ones provide one way for separately distributed packages to share the values computed by @command{configure}. Doing so can be useful if some of the packages need a superset of the features that one of them, perhaps a common library, does. These options allow a @file{config.status} file to create files other than the ones that its @file{configure.ac} specifies, so it can be used for a different package, or for extracting a subset of values. For example, @example echo '@@CC@@' | ./config.status --file=- @end example @noindent provides the value of @code{@@CC@@} on standard output. @item --header=@var{file}[:@var{template}] Same as @option{--file} above, but with @samp{AC_CONFIG_HEADERS}. @item --recheck Ask @file{config.status} to update itself and exit (no instantiation). This option is useful if you change @command{configure}, so that the results of some tests might be different from the previous run. The @option{--recheck} option reruns @command{configure} with the same arguments you used before, plus the @option{--no-create} option, which prevents @command{configure} from running @file{config.status} and creating @file{Makefile} and other files, and the @option{--no-recursion} option, which prevents @command{configure} from running other @command{configure} scripts in subdirectories. (This is so other Make rules can run @file{config.status} when it changes; @pxref{Automatic Remaking}, for an example). @end table @file{config.status} checks several optional environment variables that can alter its behavior: @anchor{CONFIG_SHELL} @defvar CONFIG_SHELL @evindex CONFIG_SHELL The shell with which to run @command{configure}. It must be Bourne-compatible, and the absolute name of the shell should be passed. The default is a shell that supports @code{LINENO} if available, and @file{/bin/sh} otherwise. @end defvar @defvar CONFIG_STATUS @evindex CONFIG_STATUS The file name to use for the shell script that records the configuration. The default is @file{./config.status}. This variable is useful when one package uses parts of another and the @command{configure} scripts shouldn't be merged because they are maintained separately. @end defvar You can use @file{./config.status} in your makefiles. For example, in the dependencies given above (@pxref{Automatic Remaking}), @file{config.status} is run twice when @file{configure.ac} has changed. If that bothers you, you can make each run only regenerate the files for that rule: @example @group config.h: stamp-h stamp-h: config.h.in config.status ./config.status config.h echo > stamp-h Makefile: Makefile.in config.status ./config.status Makefile @end group @end example The calling convention of @file{config.status} has changed; see @ref{Obsolete config.status Use}, for details. @c =================================================== Obsolete Constructs @node Obsolete Constructs @chapter Obsolete Constructs @cindex Obsolete constructs Autoconf changes, and throughout the years some constructs have been obsoleted. Most of the changes involve the macros, but in some cases the tools themselves, or even some concepts, are now considered obsolete. You may completely skip this chapter if you are new to Autoconf. Its intention is mainly to help maintainers updating their packages by understanding how to move to more modern constructs. @menu * Obsolete config.status Use:: Obsolete convention for @command{config.status} * acconfig Header:: Additional entries in @file{config.h.in} * autoupdate Invocation:: Automatic update of @file{configure.ac} * Obsolete Macros:: Backward compatibility macros * Autoconf 1:: Tips for upgrading your files * Autoconf 2.13:: Some fresher tips @end menu @node Obsolete config.status Use @section Obsolete @file{config.status} Invocation @file{config.status} now supports arguments to specify the files to instantiate; see @ref{config.status Invocation}, for more details. Before, environment variables had to be used. @defvar CONFIG_COMMANDS @evindex CONFIG_COMMANDS The tags of the commands to execute. The default is the arguments given to @code{AC_OUTPUT} and @code{AC_CONFIG_COMMANDS} in @file{configure.ac}. @end defvar @defvar CONFIG_FILES @evindex CONFIG_FILES The files in which to perform @samp{@@@var{variable}@@} substitutions. The default is the arguments given to @code{AC_OUTPUT} and @code{AC_CONFIG_FILES} in @file{configure.ac}. @end defvar @defvar CONFIG_HEADERS @evindex CONFIG_HEADERS The files in which to substitute C @code{#define} statements. The default is the arguments given to @code{AC_CONFIG_HEADERS}; if that macro was not called, @file{config.status} ignores this variable. @end defvar @defvar CONFIG_LINKS @evindex CONFIG_LINKS The symbolic links to establish. The default is the arguments given to @code{AC_CONFIG_LINKS}; if that macro was not called, @file{config.status} ignores this variable. @end defvar In @ref{config.status Invocation}, using this old interface, the example would be: @example @group config.h: stamp-h stamp-h: config.h.in config.status CONFIG_COMMANDS= CONFIG_LINKS= CONFIG_FILES= \ CONFIG_HEADERS=config.h ./config.status echo > stamp-h Makefile: Makefile.in config.status CONFIG_COMMANDS= CONFIG_LINKS= CONFIG_HEADERS= \ CONFIG_FILES=Makefile ./config.status @end group @end example @noindent (If @file{configure.ac} does not call @code{AC_CONFIG_HEADERS}, there is no need to set @code{CONFIG_HEADERS} in the @command{make} rules. Equally for @code{CONFIG_COMMANDS}, etc.) @node acconfig Header @section @file{acconfig.h} @cindex @file{acconfig.h} @cindex @file{config.h.top} @cindex @file{config.h.bot} In order to produce @file{config.h.in}, @command{autoheader} needs to build or to find templates for each symbol. Modern releases of Autoconf use @code{AH_VERBATIM} and @code{AH_TEMPLATE} (@pxref{Autoheader Macros}), but in older releases a file, @file{acconfig.h}, contained the list of needed templates. @command{autoheader} copied comments and @code{#define} and @code{#undef} statements from @file{acconfig.h} in the current directory, if present. This file used to be mandatory if you @code{AC_DEFINE} any additional symbols. Modern releases of Autoconf also provide @code{AH_TOP} and @code{AH_BOTTOM} if you need to prepend/append some information to @file{config.h.in}. Ancient versions of Autoconf had a similar feature: if @file{./acconfig.h} contains the string @samp{@@TOP@@}, @command{autoheader} copies the lines before the line containing @samp{@@TOP@@} into the top of the file that it generates. Similarly, if @file{./acconfig.h} contains the string @samp{@@BOTTOM@@}, @command{autoheader} copies the lines after that line to the end of the file it generates. Either or both of those strings may be omitted. An even older alternate way to produce the same effect in ancient versions of Autoconf is to create the files @file{@var{file}.top} (typically @file{config.h.top}) and/or @file{@var{file}.bot} in the current directory. If they exist, @command{autoheader} copies them to the beginning and end, respectively, of its output. In former versions of Autoconf, the files used in preparing a software package for distribution were: @example @group configure.ac --. .------> autoconf* -----> configure +---+ [aclocal.m4] --+ `---. [acsite.m4] ---' | +--> [autoheader*] -> [config.h.in] [acconfig.h] ----. | +-----' [config.h.top] --+ [config.h.bot] --' @end group @end example Using only the @code{AH_} macros, @file{configure.ac} should be self-contained, and should not depend upon @file{acconfig.h} etc. @node autoupdate Invocation @section Using @command{autoupdate} to Modernize @file{configure.ac} @cindex @command{autoupdate} The @command{autoupdate} program updates a @file{configure.ac} file that calls Autoconf macros by their old names to use the current macro names. In version 2 of Autoconf, most of the macros were renamed to use a more uniform and descriptive naming scheme. @xref{Macro Names}, for a description of the new scheme. Although the old names still work (@pxref{Obsolete Macros}, for a list of the old macros and the corresponding new names), you can make your @file{configure.ac} files more readable and make it easier to use the current Autoconf documentation if you update them to use the new macro names. @evindex SIMPLE_BACKUP_SUFFIX If given no arguments, @command{autoupdate} updates @file{configure.ac}, backing up the original version with the suffix @file{~} (or the value of the environment variable @code{SIMPLE_BACKUP_SUFFIX}, if that is set). If you give @command{autoupdate} an argument, it reads that file instead of @file{configure.ac} and writes the updated file to the standard output. @noindent @command{autoupdate} accepts the following options: @table @option @item --help @itemx -h Print a summary of the command line options and exit. @item --version @itemx -V Print the version number of Autoconf and exit. @item --verbose @itemx -v Report processing steps. @item --debug @itemx -d Don't remove the temporary files. @item --force @itemx -f Force the update even if the file has not changed. Disregard the cache. @item --include=@var{dir} @itemx -I @var{dir} Also look for input files in @var{dir}. Multiple invocations accumulate. Directories are browsed from last to first. @item --prepend-include=@var{dir} @itemx -B @var{dir} Prepend directory @var{dir} to the search path. This is used to include the language-specific files before any third-party macros. @end table @node Obsolete Macros @section Obsolete Macros Several macros are obsoleted in Autoconf, for various reasons (typically they failed to quote properly, couldn't be extended for more recent issues, etc.). They are still supported, but deprecated: their use should be avoided. During the jump from Autoconf version 1 to version 2, most of the macros were renamed to use a more uniform and descriptive naming scheme, but their signature did not change. @xref{Macro Names}, for a description of the new naming scheme. Below, if there is just the mapping from old names to new names for these macros, the reader is invited to refer to the definition of the new macro for the signature and the description. @defmac AC_AIX @acindex{AIX} @cvindex _ALL_SOURCE This macro is a platform-specific subset of @code{AC_USE_SYSTEM_EXTENSIONS} (@pxref{AC_USE_SYSTEM_EXTENSIONS}). @end defmac @defmac AC_ALLOCA @acindex{ALLOCA} Replaced by @code{AC_FUNC_ALLOCA} (@pxref{AC_FUNC_ALLOCA}). @end defmac @defmac AC_ARG_ARRAY @acindex{ARG_ARRAY} Removed because of limited usefulness. @end defmac @defmac AC_C_CROSS @acindex{C_CROSS} This macro is obsolete; it does nothing. @end defmac @defmac AC_C_LONG_DOUBLE @acindex{C_LONG_DOUBLE} @cvindex HAVE_LONG_DOUBLE If the C compiler supports a working @code{long double} type with more range or precision than the @code{double} type, define @code{HAVE_LONG_DOUBLE}. You should use @code{AC_TYPE_LONG_DOUBLE} or @code{AC_TYPE_LONG_DOUBLE_WIDER} instead. @xref{Particular Types}. @end defmac @defmac AC_CANONICAL_SYSTEM @acindex{CANONICAL_SYSTEM} Determine the system type and set output variables to the names of the canonical system types. @xref{Canonicalizing}, for details about the variables this macro sets. The user is encouraged to use either @code{AC_CANONICAL_BUILD}, or @code{AC_CANONICAL_HOST}, or @code{AC_CANONICAL_TARGET}, depending on the needs. Using @code{AC_CANONICAL_TARGET} is enough to run the two other macros (@pxref{Canonicalizing}). @end defmac @defmac AC_CHAR_UNSIGNED @acindex{CHAR_UNSIGNED} Replaced by @code{AC_C_CHAR_UNSIGNED} (@pxref{AC_C_CHAR_UNSIGNED}). @end defmac @defmac AC_CHECK_TYPE (@var{type}, @var{default}) @acindex{CHECK_TYPE} Autoconf, up to 2.13, used to provide this version of @code{AC_CHECK_TYPE}, deprecated because of its flaws. First, although it is a member of the @code{CHECK} clan, it does more than just checking. Secondly, missing types are defined using @code{#define}, not @code{typedef}, and this can lead to problems in the case of pointer types. This use of @code{AC_CHECK_TYPE} is obsolete and discouraged; see @ref{Generic Types}, for the description of the current macro. If the type @var{type} is not defined, define it to be the C (or C++) builtin type @var{default}, e.g., @samp{short int} or @samp{unsigned int}. This macro is equivalent to: @example AC_CHECK_TYPE([@var{type}], [], [AC_DEFINE_UNQUOTED([@var{type}], [@var{default}], [Define to `@var{default}' if does not define.])]) @end example In order to keep backward compatibility, the two versions of @code{AC_CHECK_TYPE} are implemented, selected using these heuristics: @enumerate @item If there are three or four arguments, the modern version is used. @item If the second argument appears to be a C or C++ type, then the obsolete version is used. This happens if the argument is a C or C++ @emph{builtin} type or a C identifier ending in @samp{_t}, optionally followed by one of @samp{[(* } and then by a string of zero or more characters taken from the set @samp{[]()* _a-zA-Z0-9}. @item If the second argument is spelled with the alphabet of valid C and C++ types, the user is warned and the modern version is used. @item Otherwise, the modern version is used. @end enumerate @noindent You are encouraged either to use a valid builtin type, or to use the equivalent modern code (see above), or better yet, to use @code{AC_CHECK_TYPES} together with @example #ifndef HAVE_LOFF_T typedef loff_t off_t; #endif @end example @end defmac @c end of AC_CHECK_TYPE @defmac AC_CHECKING (@var{feature-description}) @acindex{CHECKING} Same as @example AC_MSG_NOTICE([checking @var{feature-description}@dots{}] @end example @noindent @xref{AC_MSG_NOTICE}. @end defmac @defmac AC_COMPILE_CHECK (@var{echo-text}, @var{includes}, @ @var{function-body}, @var{action-if-true}, @ovar{action-if-false}) @acindex{COMPILE_CHECK} This is an obsolete version of @code{AC_TRY_COMPILE} itself replaced by @code{AC_COMPILE_IFELSE} (@pxref{Running the Compiler}), with the addition that it prints @samp{checking for @var{echo-text}} to the standard output first, if @var{echo-text} is non-empty. Use @code{AC_MSG_CHECKING} and @code{AC_MSG_RESULT} instead to print messages (@pxref{Printing Messages}). @end defmac @defmac AC_CONST @acindex{CONST} Replaced by @code{AC_C_CONST} (@pxref{AC_C_CONST}). @end defmac @defmac AC_CROSS_CHECK @acindex{CROSS_CHECK} Same as @code{AC_C_CROSS}, which is obsolete too, and does nothing @code{:-)}. @end defmac @defmac AC_CYGWIN @acindex{CYGWIN} @evindex CYGWIN Check for the Cygwin environment in which case the shell variable @code{CYGWIN} is set to @samp{yes}. Don't use this macro, the dignified means to check the nature of the host is using @code{AC_CANONICAL_HOST} (@pxref{Canonicalizing}). As a matter of fact this macro is defined as: @example AC_REQUIRE([AC_CANONICAL_HOST])[]dnl case $host_os in *cygwin* ) CYGWIN=yes;; * ) CYGWIN=no;; esac @end example Beware that the variable @env{CYGWIN} has a special meaning when running Cygwin, and should not be changed. That's yet another reason not to use this macro. @end defmac @defmac AC_DECL_SYS_SIGLIST @acindex{DECL_SYS_SIGLIST} @cvindex SYS_SIGLIST_DECLARED Same as: @example AC_CHECK_DECLS([sys_siglist], [], [], [#include /* NetBSD declares sys_siglist in unistd.h. */ #ifdef HAVE_UNISTD_H # include #endif ]) @end example @noindent @xref{AC_CHECK_DECLS}. @end defmac @defmac AC_DECL_YYTEXT @acindex{DECL_YYTEXT} Does nothing, now integrated in @code{AC_PROG_LEX} (@pxref{AC_PROG_LEX}). @end defmac @defmac AC_DIAGNOSE (@var{category}, @var{message}) @acindex{DIAGNOSE} Replaced by @code{m4_warn} (@pxref{m4_warn}). @end defmac @defmac AC_DIR_HEADER @acindex{DIR_HEADER} @cvindex DIRENT @cvindex SYSNDIR @cvindex SYSDIR @cvindex NDIR Like calling @code{AC_FUNC_CLOSEDIR_VOID} (@pxref{AC_FUNC_CLOSEDIR_VOID}) and @code{AC_HEADER_DIRENT} (@pxref{AC_HEADER_DIRENT}), but defines a different set of C preprocessor macros to indicate which header file is found: @multitable {@file{sys/ndir.h}} {Old Symbol} {@code{HAVE_SYS_NDIR_H}} @item Header @tab Old Symbol @tab New Symbol @item @file{dirent.h} @tab @code{DIRENT} @tab @code{HAVE_DIRENT_H} @item @file{sys/ndir.h} @tab @code{SYSNDIR} @tab @code{HAVE_SYS_NDIR_H} @item @file{sys/dir.h} @tab @code{SYSDIR} @tab @code{HAVE_SYS_DIR_H} @item @file{ndir.h} @tab @code{NDIR} @tab @code{HAVE_NDIR_H} @end multitable @end defmac @defmac AC_DYNIX_SEQ @acindex{DYNIX_SEQ} If on DYNIX/ptx, add @option{-lseq} to output variable @code{LIBS}. This macro used to be defined as @example AC_CHECK_LIB([seq], [getmntent], [LIBS="-lseq $LIBS"]) @end example @noindent now it is just @code{AC_FUNC_GETMNTENT} (@pxref{AC_FUNC_GETMNTENT}). @end defmac @defmac AC_EXEEXT @acindex{EXEEXT} @ovindex EXEEXT Defined the output variable @code{EXEEXT} based on the output of the compiler, which is now done automatically. Typically set to empty string if Posix and @samp{.exe} if a DOS variant. @end defmac @defmac AC_EMXOS2 @acindex{EMXOS2} Similar to @code{AC_CYGWIN} but checks for the EMX environment on OS/2 and sets @code{EMXOS2}. Don't use this macro, the dignified means to check the nature of the host is using @code{AC_CANONICAL_HOST} (@pxref{Canonicalizing}). @end defmac @defmac AC_ENABLE (@var{feature}, @var{action-if-given}, @ @ovar{action-if-not-given}) @acindex{ENABLE} This is an obsolete version of @code{AC_ARG_ENABLE} that does not support providing a help string (@pxref{AC_ARG_ENABLE}). @end defmac @defmac AC_ERROR @acindex{ERROR} Replaced by @code{AC_MSG_ERROR} (@pxref{AC_MSG_ERROR}). @end defmac @defmac AC_FATAL (@var{message}) @acindex{FATAL} Replaced by @code{m4_fatal} (@pxref{m4_fatal}). @end defmac @defmac AC_FIND_X @acindex{FIND_X} Replaced by @code{AC_PATH_X} (@pxref{AC_PATH_X}). @end defmac @defmac AC_FIND_XTRA @acindex{FIND_XTRA} Replaced by @code{AC_PATH_XTRA} (@pxref{AC_PATH_XTRA}). @end defmac @defmac AC_FOREACH @acindex{FOREACH} Replaced by @code{m4_foreach_w} (@pxref{m4_foreach_w}). @end defmac @defmac AC_FUNC_CHECK @acindex{FUNC_CHECK} Replaced by @code{AC_CHECK_FUNC} (@pxref{AC_CHECK_FUNC}). @end defmac @anchor{AC_FUNC_SETVBUF_REVERSED} @defmac AC_FUNC_SETVBUF_REVERSED @acindex{FUNC_SETVBUF_REVERSED} @cvindex SETVBUF_REVERSED @c @fuindex setvbuf @prindex @code{setvbuf} Do nothing. Formerly, this macro checked whether @code{setvbuf} takes the buffering type as its second argument and the buffer pointer as the third, instead of the other way around, and defined @code{SETVBUF_REVERSED}. However, the last systems to have the problem were those based on SVR2, which became obsolete in 1987, and the macro is no longer needed. @end defmac @defmac AC_FUNC_WAIT3 @acindex{FUNC_WAIT3} @cvindex HAVE_WAIT3 @c @fuindex wait3 @prindex @code{wait3} If @code{wait3} is found and fills in the contents of its third argument (a @samp{struct rusage *}), which HP-UX does not do, define @code{HAVE_WAIT3}. These days portable programs should use @code{waitpid}, not @code{wait3}, as @code{wait3} has been removed from Posix. @end defmac @defmac AC_GCC_TRADITIONAL @acindex{GCC_TRADITIONAL} Replaced by @code{AC_PROG_GCC_TRADITIONAL} (@pxref{AC_PROG_GCC_TRADITIONAL}). @end defmac @defmac AC_GETGROUPS_T @acindex{GETGROUPS_T} Replaced by @code{AC_TYPE_GETGROUPS} (@pxref{AC_TYPE_GETGROUPS}). @end defmac @defmac AC_GETLOADAVG @acindex{GETLOADAVG} Replaced by @code{AC_FUNC_GETLOADAVG} (@pxref{AC_FUNC_GETLOADAVG}). @end defmac @defmac AC_GNU_SOURCE @acindex{GNU_SOURCE} @cvindex _GNU_SOURCE This macro is a platform-specific subset of @code{AC_USE_SYSTEM_EXTENSIONS} (@pxref{AC_USE_SYSTEM_EXTENSIONS}). @end defmac @defmac AC_HAVE_FUNCS @acindex{HAVE_FUNCS} Replaced by @code{AC_CHECK_FUNCS} (@pxref{AC_CHECK_FUNCS}). @end defmac @defmac AC_HAVE_HEADERS @acindex{HAVE_HEADERS} Replaced by @code{AC_CHECK_HEADERS} (@pxref{AC_CHECK_HEADERS}). @end defmac @defmac AC_HAVE_LIBRARY (@var{library}, @ovar{action-if-found}, @ @ovar{action-if-not-found}, @ovar{other-libraries}) @acindex{HAVE_LIBRARY} This macro is equivalent to calling @code{AC_CHECK_LIB} with a @var{function} argument of @code{main}. In addition, @var{library} can be written as any of @samp{foo}, @option{-lfoo}, or @samp{libfoo.a}. In all of those cases, the compiler is passed @option{-lfoo}. However, @var{library} cannot be a shell variable; it must be a literal name. @xref{AC_CHECK_LIB}. @end defmac @defmac AC_HAVE_POUNDBANG @acindex{HAVE_POUNDBANG} Replaced by @code{AC_SYS_INTERPRETER} (@pxref{AC_SYS_INTERPRETER}). @end defmac @defmac AC_HEADER_CHECK @acindex{HEADER_CHECK} Replaced by @code{AC_CHECK_HEADER} (@pxref{AC_CHECK_HEADER}). @end defmac @defmac AC_HEADER_EGREP @acindex{HEADER_EGREP} Replaced by @code{AC_EGREP_HEADER} (@pxref{AC_EGREP_HEADER}). @end defmac @anchor{AC_HEADER_TIME} @defmac AC_HEADER_TIME @acindex{HEADER_TIME} @cvindex TIME_WITH_SYS_TIME @hdrindex{time.h} @hdrindex{sys/time.h} @caindex header_time This macro used to check whether it was possible to include @file{time.h} and @file{sys/time.h} in the same source file, defining @code{TIME_WITH_SYS_TIME} if so. Nowadays, it is equivalent to @samp{AC_CHECK_HEADERS([sys/time.h])}, although it does still define @code{TIME_WITH_SYS_TIME} for compatibility's sake. @file{time.h} is universally present, and the systems on which @file{sys/time.h} conflicted with @file{time.h} are obsolete. @end defmac @defmac AC_HELP_STRING @acindex{HELP_STRING} Replaced by @code{AS_HELP_STRING} (@pxref{AS_HELP_STRING}). @end defmac @defmac AC_INIT (@var{unique-file-in-source-dir}) @acindex{INIT} Formerly @code{AC_INIT} used to have a single argument, and was equivalent to: @example AC_INIT AC_CONFIG_SRCDIR(@var{unique-file-in-source-dir}) @end example See @ref{AC_INIT} and @ref{AC_CONFIG_SRCDIR}. @end defmac @defmac AC_INLINE @acindex{INLINE} Replaced by @code{AC_C_INLINE} (@pxref{AC_C_INLINE}). @end defmac @defmac AC_INT_16_BITS @acindex{INT_16_BITS} @cvindex INT_16_BITS If the C type @code{int} is 16 bits wide, define @code{INT_16_BITS}. Use @samp{AC_CHECK_SIZEOF(int)} instead (@pxref{AC_CHECK_SIZEOF}). @end defmac @defmac AC_IRIX_SUN @acindex{IRIX_SUN} If on IRIX (Silicon Graphics Unix), add @option{-lsun} to output @code{LIBS}. If you were using it to get @code{getmntent}, use @code{AC_FUNC_GETMNTENT} instead. If you used it for the NIS versions of the password and group functions, use @samp{AC_CHECK_LIB(sun, getpwnam)}. Up to Autoconf 2.13, it used to be @example AC_CHECK_LIB([sun], [getmntent], [LIBS="-lsun $LIBS"]) @end example @noindent now it is defined as @example AC_FUNC_GETMNTENT AC_CHECK_LIB([sun], [getpwnam]) @end example @noindent See @ref{AC_FUNC_GETMNTENT} and @ref{AC_CHECK_LIB}. @end defmac @defmac AC_ISC_POSIX @acindex{ISC_POSIX} @ovindex LIBS This macro adds @option{-lcposix} to output variable @code{LIBS} if necessary for Posix facilities. Sun dropped support for the obsolete INTERACTIVE Systems Corporation Unix on 2006-07-23. New programs need not use this macro. It is implemented as @code{AC_SEARCH_LIBS([strerror], [cposix])} (@pxref{AC_SEARCH_LIBS}). @end defmac @defmac AC_LANG_C @acindex{LANG_C} Same as @samp{AC_LANG([C])} (@pxref{AC_LANG}). @end defmac @defmac AC_LANG_CPLUSPLUS @acindex{LANG_CPLUSPLUS} Same as @samp{AC_LANG([C++])} (@pxref{AC_LANG}). @end defmac @defmac AC_LANG_FORTRAN77 @acindex{LANG_FORTRAN77} Same as @samp{AC_LANG([Fortran 77])} (@pxref{AC_LANG}). @end defmac @defmac AC_LANG_RESTORE @acindex{LANG_RESTORE} Select the @var{language} that is saved on the top of the stack, as set by @code{AC_LANG_SAVE}, remove it from the stack, and call @code{AC_LANG(@var{language})}. @xref{Language Choice}, for the preferred way to change languages. @end defmac @defmac AC_LANG_SAVE @acindex{LANG_SAVE} Remember the current language (as set by @code{AC_LANG}) on a stack. The current language does not change. @code{AC_LANG_PUSH} is preferred (@pxref{AC_LANG_PUSH}). @end defmac @defmac AC_LINK_FILES (@var{source}@dots{}, @var{dest}@dots{}) @acindex{LINK_FILES} This is an obsolete version of @code{AC_CONFIG_LINKS} (@pxref{AC_CONFIG_LINKS}. An updated version of: @example AC_LINK_FILES(config/$machine.h config/$obj_format.h, host.h object.h) @end example @noindent is: @example AC_CONFIG_LINKS([host.h:config/$machine.h object.h:config/$obj_format.h]) @end example @end defmac @defmac AC_LN_S @acindex{LN_S} Replaced by @code{AC_PROG_LN_S} (@pxref{AC_PROG_LN_S}). @end defmac @defmac AC_LONG_64_BITS @acindex{LONG_64_BITS} @cvindex LONG_64_BITS Define @code{LONG_64_BITS} if the C type @code{long int} is 64 bits wide. Use the generic macro @samp{AC_CHECK_SIZEOF([long int])} instead (@pxref{AC_CHECK_SIZEOF}). @end defmac @defmac AC_LONG_DOUBLE @acindex{LONG_DOUBLE} If the C compiler supports a working @code{long double} type with more range or precision than the @code{double} type, define @code{HAVE_LONG_DOUBLE}. You should use @code{AC_TYPE_LONG_DOUBLE} or @code{AC_TYPE_LONG_DOUBLE_WIDER} instead. @xref{Particular Types}. @end defmac @defmac AC_LONG_FILE_NAMES @acindex{LONG_FILE_NAMES} Replaced by @example AC_SYS_LONG_FILE_NAMES @end example @noindent @xref{AC_SYS_LONG_FILE_NAMES}. @end defmac @defmac AC_MAJOR_HEADER @acindex{MAJOR_HEADER} Replaced by @code{AC_HEADER_MAJOR} (@pxref{AC_HEADER_MAJOR}). @end defmac @defmac AC_MEMORY_H @acindex{MEMORY_H} @cvindex NEED_MEMORY_H Used to define @code{NEED_MEMORY_H} if the @code{mem} functions were defined in @file{memory.h}. Today it is equivalent to @samp{AC_CHECK_HEADERS([memory.h])} (@pxref{AC_CHECK_HEADERS}). Adjust your code to get the @code{mem} functions from @file{string.h} instead. @end defmac @defmac AC_MINGW32 @acindex{MINGW32} Similar to @code{AC_CYGWIN} but checks for the MinGW compiler environment and sets @code{MINGW32}. Don't use this macro, the dignified means to check the nature of the host is using @code{AC_CANONICAL_HOST} (@pxref{Canonicalizing}). @end defmac @defmac AC_MINIX @acindex{MINIX} @cvindex _MINIX @cvindex _POSIX_SOURCE @cvindex _POSIX_1_SOURCE This macro is a platform-specific subset of @code{AC_USE_SYSTEM_EXTENSIONS} (@pxref{AC_USE_SYSTEM_EXTENSIONS}). @end defmac @defmac AC_MINUS_C_MINUS_O @acindex{MINUS_C_MINUS_O} Replaced by @code{AC_PROG_CC_C_O} (@pxref{AC_PROG_CC_C_O}). @end defmac @defmac AC_MMAP @acindex{MMAP} Replaced by @code{AC_FUNC_MMAP} (@pxref{AC_FUNC_MMAP}). @end defmac @defmac AC_MODE_T @acindex{MODE_T} Replaced by @code{AC_TYPE_MODE_T} (@pxref{AC_TYPE_MODE_T}). @end defmac @defmac AC_OBJEXT @acindex{OBJEXT} @ovindex OBJEXT Defined the output variable @code{OBJEXT} based on the output of the compiler, after .c files have been excluded. Typically set to @samp{o} if Posix, @samp{obj} if a DOS variant. Now the compiler checking macros handle this automatically. @end defmac @defmac AC_OBSOLETE (@var{this-macro-name}, @ovar{suggestion}) @acindex{OBSOLETE} Make M4 print a message to the standard error output warning that @var{this-macro-name} is obsolete, and giving the file and line number where it was called. @var{this-macro-name} should be the name of the macro that is calling @code{AC_OBSOLETE}. If @var{suggestion} is given, it is printed at the end of the warning message; for example, it can be a suggestion for what to use instead of @var{this-macro-name}. For instance @example AC_OBSOLETE([$0], [; use AC_CHECK_HEADERS(unistd.h) instead])dnl @end example @noindent You are encouraged to use @code{AU_DEFUN} instead, since it gives better services to the user (@pxref{AU_DEFUN}). @end defmac @defmac AC_OFF_T @acindex{OFF_T} Replaced by @code{AC_TYPE_OFF_T} (@pxref{AC_TYPE_OFF_T}). @end defmac @defmac AC_OUTPUT (@ovar{file}@dots{}, @ovar{extra-cmds}, @ovar{init-cmds}) @acindex{OUTPUT} The use of @code{AC_OUTPUT} with arguments is deprecated. This obsoleted interface is equivalent to: @example @group AC_CONFIG_FILES(@var{file}@dots{}) AC_CONFIG_COMMANDS([default], @var{extra-cmds}, @var{init-cmds}) AC_OUTPUT @end group @end example @noindent See @ref{AC_CONFIG_FILES}, @ref{AC_CONFIG_COMMANDS}, and @ref{AC_OUTPUT}. @end defmac @defmac AC_OUTPUT_COMMANDS (@var{extra-cmds}, @ovar{init-cmds}) @acindex{OUTPUT_COMMANDS} Specify additional shell commands to run at the end of @file{config.status}, and shell commands to initialize any variables from @command{configure}. This macro may be called multiple times. It is obsolete, replaced by @code{AC_CONFIG_COMMANDS} (@pxref{AC_CONFIG_COMMANDS}). Here is an unrealistic example: @example fubar=27 AC_OUTPUT_COMMANDS([echo this is extra $fubar, and so on.], [fubar=$fubar]) AC_OUTPUT_COMMANDS([echo this is another, extra, bit], [echo init bit]) @end example Aside from the fact that @code{AC_CONFIG_COMMANDS} requires an additional key, an important difference is that @code{AC_OUTPUT_COMMANDS} is quoting its arguments twice, unlike @code{AC_CONFIG_COMMANDS}. This means that @code{AC_CONFIG_COMMANDS} can safely be given macro calls as arguments: @example AC_CONFIG_COMMANDS(foo, [my_FOO()]) @end example @noindent Conversely, where one level of quoting was enough for literal strings with @code{AC_OUTPUT_COMMANDS}, you need two with @code{AC_CONFIG_COMMANDS}. The following lines are equivalent: @example @group AC_OUTPUT_COMMANDS([echo "Square brackets: []"]) AC_CONFIG_COMMANDS([default], [[echo "Square brackets: []"]]) @end group @end example @end defmac @defmac AC_PID_T @acindex{PID_T} Replaced by @code{AC_TYPE_PID_T} (@pxref{AC_TYPE_PID_T}). @end defmac @defmac AC_PREFIX @acindex{PREFIX} Replaced by @code{AC_PREFIX_PROGRAM} (@pxref{AC_PREFIX_PROGRAM}). @end defmac @defmac AC_PROG_CC_C89 @acindex{PROG_CC_C89} Now done by @code{AC_PROG_CC} (@pxref{AC_PROG_CC}). @end defmac @defmac AC_PROG_CC_C99 @acindex{PROG_CC_C99} Now done by @code{AC_PROG_CC} (@pxref{AC_PROG_CC}). @end defmac @defmac AC_PROG_CC_STDC @acindex{PROG_CC_STDC} Now done by @code{AC_PROG_CC} (@pxref{AC_PROG_CC}). @end defmac @defmac AC_PROGRAMS_CHECK @acindex{PROGRAMS_CHECK} Replaced by @code{AC_CHECK_PROGS} (@pxref{AC_CHECK_PROGS}). @end defmac @defmac AC_PROGRAMS_PATH @acindex{PROGRAMS_PATH} Replaced by @code{AC_PATH_PROGS} (@pxref{AC_PATH_PROGS}). @end defmac @defmac AC_PROGRAM_CHECK @acindex{PROGRAM_CHECK} Replaced by @code{AC_CHECK_PROG} (@pxref{AC_CHECK_PROG}). @end defmac @defmac AC_PROGRAM_EGREP @acindex{PROGRAM_EGREP} Replaced by @code{AC_EGREP_CPP} (@pxref{AC_EGREP_CPP}). @end defmac @defmac AC_PROGRAM_PATH @acindex{PROGRAM_PATH} Replaced by @code{AC_PATH_PROG} (@pxref{AC_PATH_PROG}). @end defmac @defmac AC_REMOTE_TAPE @acindex{REMOTE_TAPE} Removed because of limited usefulness. @end defmac @defmac AC_RESTARTABLE_SYSCALLS @acindex{RESTARTABLE_SYSCALLS} This macro was renamed @code{AC_SYS_RESTARTABLE_SYSCALLS}. However, these days portable programs should use @code{sigaction} with @code{SA_RESTART} if they want restartable system calls. They should not rely on @code{HAVE_RESTARTABLE_SYSCALLS}, since nowadays whether a system call is restartable is a dynamic issue, not a configuration-time issue. @end defmac @defmac AC_RETSIGTYPE @acindex{RETSIGTYPE} Replaced by @code{AC_TYPE_SIGNAL} (@pxref{AC_TYPE_SIGNAL}), which itself is obsolete when assuming C89 or better. @end defmac @defmac AC_RSH @acindex{RSH} Removed because of limited usefulness. @end defmac @defmac AC_SCO_INTL @acindex{SCO_INTL} @ovindex LIBS If on SCO Unix, add @option{-lintl} to output variable @code{LIBS}. This macro used to do this: @example AC_CHECK_LIB([intl], [strftime], [LIBS="-lintl $LIBS"]) @end example @noindent Now it just calls @code{AC_FUNC_STRFTIME} instead (@pxref{AC_FUNC_STRFTIME}). @end defmac @defmac AC_SETVBUF_REVERSED @acindex{SETVBUF_REVERSED} Replaced by @example AC_FUNC_SETVBUF_REVERSED @end example @noindent @xref{AC_FUNC_SETVBUF_REVERSED}. @end defmac @defmac AC_SET_MAKE @acindex{SET_MAKE} Replaced by @code{AC_PROG_MAKE_SET} (@pxref{AC_PROG_MAKE_SET}). @end defmac @defmac AC_SIZEOF_TYPE @acindex{SIZEOF_TYPE} Replaced by @code{AC_CHECK_SIZEOF} (@pxref{AC_CHECK_SIZEOF}). @end defmac @defmac AC_SIZE_T @acindex{SIZE_T} Replaced by @code{AC_TYPE_SIZE_T} (@pxref{AC_TYPE_SIZE_T}). @end defmac @defmac AC_STAT_MACROS_BROKEN @acindex{STAT_MACROS_BROKEN} Replaced by @code{AC_HEADER_STAT} (@pxref{AC_HEADER_STAT}). @end defmac @defmac AC_STDC_HEADERS @acindex{STDC_HEADERS} Replaced by @code{AC_HEADER_STDC} (@pxref{AC_HEADER_STDC}), which is itself obsolete. Nowadays it is safe to assume the facilities of C90 exist. @end defmac @defmac AC_STRCOLL @acindex{STRCOLL} Replaced by @code{AC_FUNC_STRCOLL} (@pxref{AC_FUNC_STRCOLL}). @end defmac @defmac AC_STRUCT_ST_BLKSIZE @acindex{STRUCT_ST_BLKSIZE} @cvindex HAVE_STRUCT_STAT_ST_BLKSIZE @cvindex HAVE_ST_BLKSIZE If @code{struct stat} contains an @code{st_blksize} member, define @code{HAVE_STRUCT_STAT_ST_BLKSIZE}. The former name, @code{HAVE_ST_BLKSIZE} is to be avoided, as its support will cease in the future. This macro is obsoleted, and should be replaced by @example AC_CHECK_MEMBERS([struct stat.st_blksize]) @end example @noindent @xref{AC_CHECK_MEMBERS}. @end defmac @defmac AC_STRUCT_ST_RDEV @acindex{STRUCT_ST_RDEV} @cvindex HAVE_ST_RDEV @cvindex HAVE_STRUCT_STAT_ST_RDEV If @code{struct stat} contains an @code{st_rdev} member, define @code{HAVE_STRUCT_STAT_ST_RDEV}. The former name for this macro, @code{HAVE_ST_RDEV}, is to be avoided as it will cease to be supported in the future. Actually, even the new macro is obsolete and should be replaced by: @example AC_CHECK_MEMBERS([struct stat.st_rdev]) @end example @noindent @xref{AC_CHECK_MEMBERS}. @end defmac @defmac AC_ST_BLKSIZE @acindex{ST_BLKSIZE} Replaced by @code{AC_CHECK_MEMBERS} (@pxref{AC_CHECK_MEMBERS}). @end defmac @defmac AC_ST_BLOCKS @acindex{ST_BLOCKS} Replaced by @code{AC_STRUCT_ST_BLOCKS} (@pxref{AC_STRUCT_ST_BLOCKS}). @end defmac @defmac AC_ST_RDEV @acindex{ST_RDEV} Replaced by @code{AC_CHECK_MEMBERS} (@pxref{AC_CHECK_MEMBERS}). @end defmac @defmac AC_SYS_RESTARTABLE_SYSCALLS @acindex{SYS_RESTARTABLE_SYSCALLS} @cvindex HAVE_RESTARTABLE_SYSCALLS If the system automatically restarts a system call that is interrupted by a signal, define @code{HAVE_RESTARTABLE_SYSCALLS}. This macro does not check whether system calls are restarted in general---it checks whether a signal handler installed with @code{signal} (but not @code{sigaction}) causes system calls to be restarted. It does not check whether system calls can be restarted when interrupted by signals that have no handler. These days portable programs should use @code{sigaction} with @code{SA_RESTART} if they want restartable system calls. They should not rely on @code{HAVE_RESTARTABLE_SYSCALLS}, since nowadays whether a system call is restartable is a dynamic issue, not a configuration-time issue. @end defmac @defmac AC_SYS_SIGLIST_DECLARED @acindex{SYS_SIGLIST_DECLARED} This macro was renamed @code{AC_DECL_SYS_SIGLIST}. However, even that name is obsolete, as the same functionality is now achieved via @code{AC_CHECK_DECLS} (@pxref{AC_CHECK_DECLS}). @end defmac @defmac AC_TEST_CPP @acindex{TEST_CPP} This macro was renamed @code{AC_TRY_CPP}, which in turn was replaced by @code{AC_PREPROC_IFELSE} (@pxref{AC_PREPROC_IFELSE}). @end defmac @defmac AC_TEST_PROGRAM @acindex{TEST_PROGRAM} This macro was renamed @code{AC_TRY_RUN}, which in turn was replaced by @code{AC_RUN_IFELSE} (@pxref{AC_RUN_IFELSE}). @end defmac @defmac AC_TIMEZONE @acindex{TIMEZONE} Replaced by @code{AC_STRUCT_TIMEZONE} (@pxref{AC_STRUCT_TIMEZONE}). @end defmac @defmac AC_TIME_WITH_SYS_TIME @acindex{TIME_WITH_SYS_TIME} Replaced by @code{AC_HEADER_TIME} (@pxref{AC_HEADER_TIME}), which is itself obsolete; nowadays one need only do @samp{AC_CHECK_HEADERS([sys/time.h])}. @end defmac @defmac AC_TRY_COMPILE (@var{includes}, @var{function-body}, @ @ovar{action-if-true}, @ovar{action-if-false}) @acindex{TRY_COMPILE} Same as: @example AC_COMPILE_IFELSE( [AC_LANG_PROGRAM([[@var{includes}]], [[@var{function-body}]])], [@var{action-if-true}], [@var{action-if-false}]) @end example @noindent @xref{Running the Compiler}. This macro double quotes both @var{includes} and @var{function-body}. For C and C++, @var{includes} is any @code{#include} statements needed by the code in @var{function-body} (@var{includes} is ignored if the currently selected language is Fortran or Fortran 77). The compiler and compilation flags are determined by the current language (@pxref{Language Choice}). @end defmac @defmac AC_TRY_CPP (@var{input}, @ovar{action-if-true}, @ovar{action-if-false}) @acindex{TRY_CPP} Same as: @example AC_PREPROC_IFELSE( [AC_LANG_SOURCE([[@var{input}]])], [@var{action-if-true}], [@var{action-if-false}]) @end example @noindent @xref{Running the Preprocessor}. This macro double quotes the @var{input}. @end defmac @defmac AC_TRY_LINK (@var{includes}, @var{function-body}, @ @ovar{action-if-true}, @ovar{action-if-false}) @acindex{TRY_LINK} Same as: @example AC_LINK_IFELSE( [AC_LANG_PROGRAM([[@var{includes}]], [[@var{function-body}]])], [@var{action-if-true}], [@var{action-if-false}]) @end example @noindent @xref{Running the Linker}. This macro double quotes both @var{includes} and @var{function-body}. Depending on the current language (@pxref{Language Choice}), create a test program to see whether a function whose body consists of @var{function-body} can be compiled and linked. If the file compiles and links successfully, run shell commands @var{action-if-found}, otherwise run @var{action-if-not-found}. This macro double quotes both @var{includes} and @var{function-body}. For C and C++, @var{includes} is any @code{#include} statements needed by the code in @var{function-body} (@var{includes} is ignored if the currently selected language is Fortran or Fortran 77). The compiler and compilation flags are determined by the current language (@pxref{Language Choice}), and in addition @code{LDFLAGS} and @code{LIBS} are used for linking. @end defmac @defmac AC_TRY_LINK_FUNC (@var{function}, @ovar{action-if-found}, @ @ovar{action-if-not-found}) @acindex{TRY_LINK_FUNC} This macro is equivalent to @example AC_LINK_IFELSE([AC_LANG_CALL([], [@var{function}])], [@var{action-if-found}], [@var{action-if-not-found}]) @end example @noindent @xref{Running the Linker}. @end defmac @defmac AC_TRY_RUN (@var{program}, @ovar{action-if-true}, @ @ovar{action-if-false}, @dvar{action-if-cross-compiling, AC_MSG_FAILURE}) @acindex{TRY_RUN} Same as: @example AC_RUN_IFELSE( [AC_LANG_SOURCE([[@var{program}]])], [@var{action-if-true}], [@var{action-if-false}], [@var{action-if-cross-compiling}]) @end example @noindent @xref{Runtime}. @end defmac @anchor{AC_TYPE_SIGNAL} @defmac AC_TYPE_SIGNAL @acindex{TYPE_SIGNAL} @cvindex RETSIGTYPE @hdrindex{signal.h} If @file{signal.h} declares @code{signal} as returning a pointer to a function returning @code{void}, define @code{RETSIGTYPE} to be @code{void}; otherwise, define it to be @code{int}. These days, it is portable to assume C89, and that signal handlers return @code{void}, without needing to use this macro or @code{RETSIGTYPE}. When targeting older K&R C, it is possible to define signal handlers as returning type @code{RETSIGTYPE}, and omit a return statement: @example @group RETSIGTYPE hup_handler () @{ @dots{} @} @end group @end example @end defmac @defmac AC_UID_T @acindex{UID_T} Replaced by @code{AC_TYPE_UID_T} (@pxref{AC_TYPE_UID_T}). @end defmac @defmac AC_UNISTD_H @acindex{UNISTD_H} Same as @samp{AC_CHECK_HEADERS([unistd.h])} (@pxref{AC_CHECK_HEADERS}), which is one of the tests done as a side effect by @code{AC_INCLUDES_DEFAULT} (@pxref{Default Includes}), so usually unnecessary to write explicitly. @end defmac @defmac AC_USG @acindex{USG} @cvindex USG Define @code{USG} if the BSD string functions (@code{bcopy}, @code{bzero}, @code{index}, @code{rindex}, etc) are @emph{not} defined in @file{strings.h}. Modern code should assume @file{string.h} exists and should use the ISO C string functions (@code{memmove}, @code{memset}, @code{strchr}, @code{strrchr}, etc) unconditionally. @file{strings.h} may be the only header that declares @code{strcasecmp}, @code{strncasecmp}, and @code{ffs}. @code{AC_INCLUDES_DEFAULT} checks for it (@pxref{Default Includes}); test @code{HAVE_STRINGS_H}. @end defmac @defmac AC_UTIME_NULL @acindex{UTIME_NULL} Replaced by @code{AC_FUNC_UTIME_NULL} (@pxref{AC_FUNC_UTIME_NULL}). @end defmac @defmac AC_VALIDATE_CACHED_SYSTEM_TUPLE (@ovar{cmd}) @acindex{VALIDATE_CACHED_SYSTEM_TUPLE} If the cache file is inconsistent with the current host, target and build system types, it used to execute @var{cmd} or print a default error message. This is now handled by default. @end defmac @defmac AC_VERBOSE (@var{result-description}) @acindex{VERBOSE} Replaced by @code{AC_MSG_RESULT} (@pxref{AC_MSG_RESULT}). @end defmac @defmac AC_VFORK @acindex{VFORK} Replaced by @code{AC_FUNC_FORK} (@pxref{AC_FUNC_FORK}). @end defmac @defmac AC_VPRINTF @acindex{VPRINTF} Replaced by @code{AC_FUNC_VPRINTF} (@pxref{AC_FUNC_VPRINTF}). @end defmac @defmac AC_WAIT3 @acindex{WAIT3} This macro was renamed @code{AC_FUNC_WAIT3}. However, these days portable programs should use @code{waitpid}, not @code{wait3}, as @code{wait3} has been removed from Posix. @end defmac @defmac AC_WARN @acindex{WARN} Replaced by @code{AC_MSG_WARN} (@pxref{AC_MSG_WARN}). @end defmac @defmac AC_WARNING (@var{message}) @acindex{WARNING} Replaced by @code{m4_warn} (@pxref{m4_warn}). @end defmac @defmac AC_WITH (@var{package}, @var{action-if-given}, @ @ovar{action-if-not-given}) @acindex{WITH} This is an obsolete version of @code{AC_ARG_WITH} that does not support providing a help string (@pxref{AC_ARG_WITH}). @end defmac @defmac AC_WORDS_BIGENDIAN @acindex{WORDS_BIGENDIAN} Replaced by @code{AC_C_BIGENDIAN} (@pxref{AC_C_BIGENDIAN}). @end defmac @defmac AC_XENIX_DIR @acindex{XENIX_DIR} @ovindex LIBS This macro used to add @option{-lx} to output variable @code{LIBS} if on Xenix. Also, if @file{dirent.h} is being checked for, added @option{-ldir} to @code{LIBS}. Now it is merely an alias of @code{AC_HEADER_DIRENT} instead, plus some code to detect whether running XENIX on which you should not depend: @example AC_MSG_CHECKING([for Xenix]) AC_EGREP_CPP([yes], [#if defined M_XENIX && !defined M_UNIX yes #endif], [AC_MSG_RESULT([yes]); XENIX=yes], [AC_MSG_RESULT([no]); XENIX=]) @end example @noindent Don't use this macro, the dignified means to check the nature of the host is using @code{AC_CANONICAL_HOST} (@pxref{Canonicalizing}). @end defmac @defmac AC_YYTEXT_POINTER @acindex{YYTEXT_POINTER} This macro was renamed @code{AC_DECL_YYTEXT}, which in turn was integrated into @code{AC_PROG_LEX} (@pxref{AC_PROG_LEX}). @end defmac @node Autoconf 1 @section Upgrading From Version 1 @cindex Upgrading autoconf @cindex Autoconf upgrading Autoconf version 2 is mostly backward compatible with version 1. However, it introduces better ways to do some things, and doesn't support some of the ugly things in version 1. So, depending on how sophisticated your @file{configure.ac} files are, you might have to do some manual work in order to upgrade to version 2. This chapter points out some problems to watch for when upgrading. Also, perhaps your @command{configure} scripts could benefit from some of the new features in version 2; the changes are summarized in the file @file{NEWS} in the Autoconf distribution. @menu * Changed File Names:: Files you might rename * Changed Makefiles:: New things to put in @file{Makefile.in} * Changed Macros:: Macro calls you might replace * Changed Results:: Changes in how to check test results * Changed Macro Writing:: Better ways to write your own macros @end menu @node Changed File Names @subsection Changed File Names If you have an @file{aclocal.m4} installed with Autoconf (as opposed to in a particular package's source directory), you must rename it to @file{acsite.m4}. @xref{autoconf Invocation}. If you distribute @file{install.sh} with your package, rename it to @file{install-sh} so @command{make} builtin rules don't inadvertently create a file called @file{install} from it. @code{AC_PROG_INSTALL} looks for the script under both names, but it is best to use the new name. If you were using @file{config.h.top}, @file{config.h.bot}, or @file{acconfig.h}, you still can, but you have less clutter if you use the @code{AH_} macros. @xref{Autoheader Macros}. @node Changed Makefiles @subsection Changed Makefiles Add @samp{@@CFLAGS@@}, @samp{@@CPPFLAGS@@}, and @samp{@@LDFLAGS@@} in your @file{Makefile.in} files, so they can take advantage of the values of those variables in the environment when @command{configure} is run. Doing this isn't necessary, but it's a convenience for users. Also add @samp{@@configure_input@@} in a comment to each input file for @code{AC_OUTPUT}, so that the output files contain a comment saying they were produced by @command{configure}. Automatically selecting the right comment syntax for all the kinds of files that people call @code{AC_OUTPUT} on became too much work. Add @file{config.log} and @file{config.cache} to the list of files you remove in @code{distclean} targets. If you have the following in @file{Makefile.in}: @example prefix = /usr/local exec_prefix = $(prefix) @end example @noindent you must change it to: @example prefix = @@prefix@@ exec_prefix = @@exec_prefix@@ @end example @noindent The old behavior of replacing those variables without @samp{@@} characters around them has been removed. @node Changed Macros @subsection Changed Macros Many of the macros were renamed in Autoconf version 2. You can still use the old names, but the new ones are clearer, and it's easier to find the documentation for them. @xref{Obsolete Macros}, for a table showing the new names for the old macros. Use the @command{autoupdate} program to convert your @file{configure.ac} to using the new macro names. @xref{autoupdate Invocation}. Some macros have been superseded by similar ones that do the job better, but are not call-compatible. If you get warnings about calling obsolete macros while running @command{autoconf}, you may safely ignore them, but your @command{configure} script generally works better if you follow the advice that is printed about what to replace the obsolete macros with. In particular, the mechanism for reporting the results of tests has changed. If you were using @command{echo} or @code{AC_VERBOSE} (perhaps via @code{AC_COMPILE_CHECK}), your @command{configure} script's output looks better if you switch to @code{AC_MSG_CHECKING} and @code{AC_MSG_RESULT}. @xref{Printing Messages}. Those macros work best in conjunction with cache variables. @xref{Caching Results}. @node Changed Results @subsection Changed Results If you were checking the results of previous tests by examining the shell variable @code{DEFS}, you need to switch to checking the values of the cache variables for those tests. @code{DEFS} no longer exists while @command{configure} is running; it is only created when generating output files. This difference from version 1 is because properly quoting the contents of that variable turned out to be too cumbersome and inefficient to do every time @code{AC_DEFINE} is called. @xref{Cache Variable Names}. For example, here is a @file{configure.ac} fragment written for Autoconf version 1: @example AC_HAVE_FUNCS(syslog) case "$DEFS" in *-DHAVE_SYSLOG*) ;; *) # syslog is not in the default libraries. See if it's in some other. saved_LIBS="$LIBS" for lib in bsd socket inet; do AC_CHECKING(for syslog in -l$lib) LIBS="-l$lib $saved_LIBS" AC_HAVE_FUNCS(syslog) case "$DEFS" in *-DHAVE_SYSLOG*) break ;; *) ;; esac LIBS="$saved_LIBS" done ;; esac @end example Here is a way to write it for version 2: @example AC_CHECK_FUNCS([syslog]) if test "x$ac_cv_func_syslog" = xno; then # syslog is not in the default libraries. See if it's in some other. for lib in bsd socket inet; do AC_CHECK_LIB([$lib], [syslog], [AC_DEFINE([HAVE_SYSLOG]) LIBS="-l$lib $LIBS"; break]) done fi @end example If you were working around bugs in @code{AC_DEFINE_UNQUOTED} by adding backslashes before quotes, you need to remove them. It now works predictably, and does not treat quotes (except back quotes) specially. @xref{Setting Output Variables}. All of the Boolean shell variables set by Autoconf macros now use @samp{yes} for the true value. Most of them use @samp{no} for false, though for backward compatibility some use the empty string instead. If you were relying on a shell variable being set to something like 1 or @samp{t} for true, you need to change your tests. @node Changed Macro Writing @subsection Changed Macro Writing When defining your own macros, you should now use @code{AC_DEFUN} instead of @code{define}. @code{AC_DEFUN} automatically calls @code{AC_PROVIDE} and ensures that macros called via @code{AC_REQUIRE} do not interrupt other macros, to prevent nested @samp{checking@dots{}} messages on the screen. There's no actual harm in continuing to use the older way, but it's less convenient and attractive. @xref{Macro Definitions}. You probably looked at the macros that came with Autoconf as a guide for how to do things. It would be a good idea to take a look at the new versions of them, as the style is somewhat improved and they take advantage of some new features. If you were doing tricky things with undocumented Autoconf internals (macros, variables, diversions), check whether you need to change anything to account for changes that have been made. Perhaps you can even use an officially supported technique in version 2 instead of kludging. Or perhaps not. To speed up your locally written feature tests, add caching to them. See whether any of your tests are of general enough usefulness to encapsulate them into macros that you can share. @node Autoconf 2.13 @section Upgrading From Version 2.13 @cindex Upgrading autoconf @cindex Autoconf upgrading The introduction of the previous section (@pxref{Autoconf 1}) perfectly suits this section@enddots{} @quotation Autoconf version 2.50 is mostly backward compatible with version 2.13. However, it introduces better ways to do some things, and doesn't support some of the ugly things in version 2.13. So, depending on how sophisticated your @file{configure.ac} files are, you might have to do some manual work in order to upgrade to version 2.50. This chapter points out some problems to watch for when upgrading. Also, perhaps your @command{configure} scripts could benefit from some of the new features in version 2.50; the changes are summarized in the file @file{NEWS} in the Autoconf distribution. @end quotation @menu * Changed Quotation:: Broken code which used to work * New Macros:: Interaction with foreign macros * Hosts and Cross-Compilation:: Bugward compatibility kludges * AC_LIBOBJ vs LIBOBJS:: LIBOBJS is a forbidden token * AC_ACT_IFELSE vs AC_TRY_ACT:: A more generic scheme for testing sources @end menu @node Changed Quotation @subsection Changed Quotation The most important changes are invisible to you: the implementation of most macros have completely changed. This allowed more factorization of the code, better error messages, a higher uniformity of the user's interface etc. Unfortunately, as a side effect, some construct which used to (miraculously) work might break starting with Autoconf 2.50. The most common culprit is bad quotation. For instance, in the following example, the message is not properly quoted: @example AC_INIT AC_CHECK_HEADERS(foo.h, , AC_MSG_ERROR(cannot find foo.h, bailing out)) AC_OUTPUT @end example @noindent Autoconf 2.13 simply ignores it: @example $ @kbd{autoconf-2.13; ./configure --silent} creating cache ./config.cache configure: error: cannot find foo.h $ @end example @noindent while Autoconf 2.50 produces a broken @file{configure}: @example $ @kbd{autoconf-2.50; ./configure --silent} configure: error: cannot find foo.h ./configure: exit: bad non-numeric arg `bailing' ./configure: exit: bad non-numeric arg `bailing' $ @end example The message needs to be quoted, and the @code{AC_MSG_ERROR} invocation too! @example AC_INIT([Example], [1.0], [bug-example@@example.org]) AC_CHECK_HEADERS([foo.h], [], [AC_MSG_ERROR([cannot find foo.h, bailing out])]) AC_OUTPUT @end example Many many (and many more) Autoconf macros were lacking proper quotation, including no less than@dots{} @code{AC_DEFUN} itself! @example $ @kbd{cat configure.in} AC_DEFUN([AC_PROG_INSTALL], [# My own much better version ]) AC_INIT AC_PROG_INSTALL AC_OUTPUT $ @kbd{autoconf-2.13} autoconf: Undefined macros: ***BUG in Autoconf--please report*** AC_FD_MSG ***BUG in Autoconf--please report*** AC_EPI configure.in:1:AC_DEFUN([AC_PROG_INSTALL], configure.in:5:AC_PROG_INSTALL $ @kbd{autoconf-2.50} $ @end example @node New Macros @subsection New Macros @cindex undefined macro @cindex @code{_m4_divert_diversion} While Autoconf was relatively dormant in the late 1990s, Automake provided Autoconf-like macros for a while. Starting with Autoconf 2.50 in 2001, Autoconf provided versions of these macros, integrated in the @code{AC_} namespace, instead of @code{AM_}. But in order to ease the upgrading via @command{autoupdate}, bindings to such @code{AM_} macros are provided. Unfortunately older versions of Automake (e.g., Automake 1.4) did not quote the names of these macros. Therefore, when @command{m4} finds something like @samp{AC_DEFUN(AM_TYPE_PTRDIFF_T, @dots{})} in @file{aclocal.m4}, @code{AM_TYPE_PTRDIFF_T} is expanded, replaced with its Autoconf definition. Fortunately Autoconf catches pre-@code{AC_INIT} expansions, and complains, in its own words: @example $ @kbd{cat configure.ac} AC_INIT([Example], [1.0], [bug-example@@example.org]) AM_TYPE_PTRDIFF_T $ @kbd{aclocal-1.4} $ @kbd{autoconf} aclocal.m4:17: error: m4_defn: undefined macro: _m4_divert_diversion aclocal.m4:17: the top level autom4te: m4 failed with exit status: 1 $ @end example Modern versions of Automake no longer define most of these macros, and properly quote the names of the remaining macros. If you must use an old Automake, do not depend upon macros from Automake as it is simply not its job to provide macros (but the one it requires itself): @example $ @kbd{cat configure.ac} AC_INIT([Example], [1.0], [bug-example@@example.org]) AM_TYPE_PTRDIFF_T $ @kbd{rm aclocal.m4} $ @kbd{autoupdate} autoupdate: `configure.ac' is updated $ @kbd{cat configure.ac} AC_INIT([Example], [1.0], [bug-example@@example.org]) AC_CHECK_TYPES([ptrdiff_t]) $ @kbd{aclocal-1.4} $ @kbd{autoconf} $ @end example @node Hosts and Cross-Compilation @subsection Hosts and Cross-Compilation @cindex Cross compilation Based on the experience of compiler writers, and after long public debates, many aspects of the cross-compilation chain have changed: @itemize @minus @item the relationship between the build, host, and target architecture types, @item the command line interface for specifying them to @command{configure}, @item the variables defined in @command{configure}, @item the enabling of cross-compilation mode. @end itemize @sp 1 The relationship between build, host, and target have been cleaned up: the chain of default is now simply: target defaults to host, host to build, and build to the result of @command{config.guess}. Nevertheless, in order to ease the transition from 2.13 to 2.50, the following transition scheme is implemented. @emph{Do not rely on it}, as it will be completely disabled in a couple of releases (we cannot keep it, as it proves to cause more problems than it cures). They all default to the result of running @command{config.guess}, unless you specify either @option{--build} or @option{--host}. In this case, the default becomes the system type you specified. If you specify both, and they're different, @command{configure} enters cross compilation mode, so it doesn't run any tests that require execution. Hint: if you mean to override the result of @command{config.guess}, prefer @option{--build} over @option{--host}. @sp 1 For backward compatibility, @command{configure} accepts a system type as an option by itself. Such an option overrides the defaults for build, host, and target system types. The following configure statement configures a cross toolchain that runs on NetBSD/alpha but generates code for GNU Hurd/sparc, which is also the build platform. @example ./configure --host=alpha-netbsd sparc-gnu @end example @sp 1 In Autoconf 2.13 and before, the variables @code{build}, @code{host}, and @code{target} had a different semantics before and after the invocation of @code{AC_CANONICAL_BUILD} etc. Now, the argument of @option{--build} is strictly copied into @code{build_alias}, and is left empty otherwise. After the @code{AC_CANONICAL_BUILD}, @code{build} is set to the canonicalized build type. To ease the transition, before, its contents is the same as that of @code{build_alias}. Do @emph{not} rely on this broken feature. For consistency with the backward compatibility scheme exposed above, when @option{--host} is specified but @option{--build} isn't, the build system is assumed to be the same as @option{--host}, and @samp{build_alias} is set to that value. Eventually, this historically incorrect behavior will go away. @sp 1 The former scheme to enable cross-compilation proved to cause more harm than good, in particular, it used to be triggered too easily, leaving regular end users puzzled in front of cryptic error messages. @command{configure} could even enter cross-compilation mode only because the compiler was not functional. This is mainly because @command{configure} used to try to detect cross-compilation, instead of waiting for an explicit flag from the user. Now, @command{configure} enters cross-compilation mode if and only if @option{--host} is passed. That's the short documentation. To ease the transition between 2.13 and its successors, a more complicated scheme is implemented. @emph{Do not rely on the following}, as it will be removed in the near future. If you specify @option{--host}, but not @option{--build}, when @command{configure} performs the first compiler test it tries to run an executable produced by the compiler. If the execution fails, it enters cross-compilation mode. This is fragile. Moreover, by the time the compiler test is performed, it may be too late to modify the build-system type: other tests may have already been performed. Therefore, whenever you specify @option{--host}, be sure to specify @option{--build} too. @example ./configure --build=x86_64-pc-linux-gnu --host=x86_64-w64-mingw64 @end example @noindent enters cross-compilation mode. The former interface, which consisted in setting the compiler to a cross-compiler without informing @command{configure} is obsolete. For instance, @command{configure} fails if it can't run the code generated by the specified compiler if you configure as follows: @example ./configure CC=x86_64-w64-mingw64-gcc @end example @node AC_LIBOBJ vs LIBOBJS @subsection @code{AC_LIBOBJ} vs.@: @code{LIBOBJS} Up to Autoconf 2.13, the replacement of functions was triggered via the variable @code{LIBOBJS}. Since Autoconf 2.50, the macro @code{AC_LIBOBJ} should be used instead (@pxref{Generic Functions}). Starting at Autoconf 2.53, the use of @code{LIBOBJS} is an error. This change is mandated by the unification of the GNU Build System components. In particular, the various fragile techniques used to parse a @file{configure.ac} are all replaced with the use of traces. As a consequence, any action must be traceable, which obsoletes critical variable assignments. Fortunately, @code{LIBOBJS} was the only problem, and it can even be handled gracefully (read, ``without your having to change something''). There were two typical uses of @code{LIBOBJS}: asking for a replacement function, and adjusting @code{LIBOBJS} for Automake and/or Libtool. @sp 1 As for function replacement, the fix is immediate: use @code{AC_LIBOBJ}. For instance: @example LIBOBJS="$LIBOBJS fnmatch.o" LIBOBJS="$LIBOBJS malloc.$ac_objext" @end example @noindent should be replaced with: @example AC_LIBOBJ([fnmatch]) AC_LIBOBJ([malloc]) @end example @sp 1 @ovindex LIBOBJDIR When used with Automake 1.10 or newer, a suitable value for @code{LIBOBJDIR} is set so that the @code{LIBOBJS} and @code{LTLIBOBJS} can be referenced from any @file{Makefile.am}. Even without Automake, arranging for @code{LIBOBJDIR} to be set correctly enables referencing @code{LIBOBJS} and @code{LTLIBOBJS} in another directory. The @code{LIBOBJDIR} feature is experimental. @node AC_ACT_IFELSE vs AC_TRY_ACT @subsection @code{AC_@var{ACT}_IFELSE} vs.@: @code{AC_TRY_@var{ACT}} @c the anchor keeps the old node name, to try to avoid breaking links @anchor{AC_FOO_IFELSE vs AC_TRY_FOO} @acindex{@var{ACT}_IFELSE} @acindex{TRY_@var{ACT}} Since Autoconf 2.50, internal codes uses @code{AC_PREPROC_IFELSE}, @code{AC_COMPILE_IFELSE}, @code{AC_LINK_IFELSE}, and @code{AC_RUN_IFELSE} on one hand and @code{AC_LANG_SOURCE}, and @code{AC_LANG_PROGRAM} on the other hand instead of the deprecated @code{AC_TRY_CPP}, @code{AC_TRY_COMPILE}, @code{AC_TRY_LINK}, and @code{AC_TRY_RUN}. The motivations where: @itemize @minus @item a more consistent interface: @code{AC_TRY_COMPILE} etc.@: were double quoting their arguments; @item the combinatorial explosion is solved by decomposing on the one hand the generation of sources, and on the other hand executing the program; @item this scheme helps supporting more languages than plain C and C++. @end itemize In addition to the change of syntax, the philosophy has changed too: while emphasis was put on speed at the expense of accuracy, today's Autoconf promotes accuracy of the testing framework at, ahem@dots{}, the expense of speed. As a perfect example of what is @emph{not} to be done, here is how to find out whether a header file contains a particular declaration, such as a typedef, a structure, a structure member, or a function. Use @code{AC_EGREP_HEADER} instead of running @code{grep} directly on the header file; on some systems the symbol might be defined in another header file that the file you are checking includes. As a (bad) example, here is how you should not check for C preprocessor symbols, either defined by header files or predefined by the C preprocessor: using @code{AC_EGREP_CPP}: @example @group AC_EGREP_CPP(yes, [#ifdef _AIX yes #endif ], is_aix=yes, is_aix=no) @end group @end example The above example, properly written would (i) use @code{AC_LANG_PROGRAM}, and (ii) run the compiler: @example @group AC_COMPILE_IFELSE([AC_LANG_PROGRAM( [[#ifndef _AIX error: This isn't AIX! #endif ]])], [is_aix=yes], [is_aix=no]) @end group @end example @c ============================= Generating Test Suites with Autotest @node Using Autotest @chapter Generating Test Suites with Autotest @cindex Autotest @display @strong{N.B.: This section describes a feature which is still stabilizing. Although we believe that Autotest is useful as-is, this documentation describes an interface which might change in the future: do not depend upon Autotest without subscribing to the Autoconf mailing lists.} @end display It is paradoxical that portable projects depend on nonportable tools to run their test suite. Autoconf by itself is the paragon of this problem: although it aims at perfectly portability, up to 2.13 its test suite was using DejaGNU, a rich and complex testing framework, but which is far from being standard on Posix systems. Worse yet, it was likely to be missing on the most fragile platforms, the very platforms that are most likely to torture Autoconf and exhibit deficiencies. To circumvent this problem, many package maintainers have developed their own testing framework, based on simple shell scripts whose sole outputs are exit status values describing whether the test succeeded. Most of these tests share common patterns, and this can result in lots of duplicated code and tedious maintenance. Following exactly the same reasoning that yielded to the inception of Autoconf, Autotest provides a test suite generation framework, based on M4 macros building a portable shell script. The suite itself is equipped with automatic logging and tracing facilities which greatly diminish the interaction with bug reporters, and simple timing reports. Autoconf itself has been using Autotest for years, and we do attest that it has considerably improved the strength of the test suite and the quality of bug reports. Other projects are known to use some generation of Autotest, such as Bison, GNU Wdiff, GNU Tar, each of them with different needs, and this usage has validated Autotest as a general testing framework. Nonetheless, compared to DejaGNU, Autotest is inadequate for interactive tool testing, which is probably its main limitation. @menu * Using an Autotest Test Suite:: Autotest and the user * Writing Testsuites:: Autotest macros * testsuite Invocation:: Running @command{testsuite} scripts * Making testsuite Scripts:: Using autom4te to create @command{testsuite} @end menu @node Using an Autotest Test Suite @section Using an Autotest Test Suite @menu * testsuite Scripts:: The concepts of Autotest * Autotest Logs:: Their contents @end menu @node testsuite Scripts @subsection @command{testsuite} Scripts @cindex @command{testsuite} Generating testing or validation suites using Autotest is rather easy. The whole validation suite is held in a file to be processed through @command{autom4te}, itself using GNU M4 under the hood, to produce a stand-alone Bourne shell script which then gets distributed. Neither @command{autom4te} nor GNU M4 are needed at the installer's end. @cindex test group Each test of the validation suite should be part of some test group. A @dfn{test group} is a sequence of interwoven tests that ought to be executed together, usually because one test in the group creates data files that a later test in the same group needs to read. Complex test groups make later debugging more tedious. It is much better to keep only a few tests per test group. Ideally there is only one test per test group. For all but the simplest packages, some file such as @file{testsuite.at} does not fully hold all test sources, as these are often easier to maintain in separate files. Each of these separate files holds a single test group, or a sequence of test groups all addressing some common functionality in the package. In such cases, @file{testsuite.at} merely initializes the validation suite, and sometimes does elementary health checking, before listing include statements for all other test files. The special file @file{package.m4}, containing the identification of the package, is automatically included if found. A convenient alternative consists in moving all the global issues (local Autotest macros, elementary health checking, and @code{AT_INIT} invocation) into the file @code{local.at}, and making @file{testsuite.at} be a simple list of @code{m4_include}s of sub test suites. In such case, generating the whole test suite or pieces of it is only a matter of choosing the @command{autom4te} command line arguments. The validation scripts that Autotest produces are by convention called @command{testsuite}. When run, @command{testsuite} executes each test group in turn, producing only one summary line per test to say if that particular test succeeded or failed. At end of all tests, summarizing counters get printed. One debugging directory is left for each test group which failed, if any: such directories are named @file{testsuite.dir/@var{nn}}, where @var{nn} is the sequence number of the test group, and they include: @itemize @bullet @item a debugging script named @file{run} which reruns the test in @dfn{debug mode} (@pxref{testsuite Invocation}). The automatic generation of debugging scripts has the purpose of easing the chase for bugs. @item all the files created with @code{AT_DATA} @item all the Erlang source code files created with @code{AT_CHECK_EUNIT} @item a log of the run, named @file{testsuite.log} @end itemize In the ideal situation, none of the tests fail, and consequently no debugging directory is left behind for validation. It often happens in practice that individual tests in the validation suite need to get information coming out of the configuration process. Some of this information, common for all validation suites, is provided through the file @file{atconfig}, automatically created by @code{AC_CONFIG_TESTDIR}. For configuration information which your testing environment specifically needs, you might prepare an optional file named @file{atlocal.in}, instantiated by @code{AC_CONFIG_FILES}. The configuration process produces @file{atconfig} and @file{atlocal} out of these two input files, and these two produced files are automatically read by the @file{testsuite} script. Here is a diagram showing the relationship between files. @noindent Files used in preparing a software package for distribution: @example [package.m4] -->. \ subfile-1.at ->. [local.at] ---->+ ... \ \ subfile-i.at ---->-- testsuite.at -->-- autom4te* -->testsuite ... / subfile-n.at ->' @end example @noindent Files used in configuring a software package: @example .--> atconfig / [atlocal.in] --> config.status* --< \ `--> [atlocal] @end example @noindent Files created during test suite execution: @example atconfig -->. .--> testsuite.log \ / >-- testsuite* --< / \ [atlocal] ->' `--> [testsuite.dir] @end example @node Autotest Logs @subsection Autotest Logs When run, the test suite creates a log file named after itself, e.g., a test suite named @command{testsuite} creates @file{testsuite.log}. It contains a lot of information, usually more than maintainers actually need, but therefore most of the time it contains all that is needed: @table @asis @item command line arguments A bad but unfortunately widespread habit consists of setting environment variables before the command, such as in @samp{CC=my-home-grown-cc ./testsuite}. The test suite does not know this change, hence (i) it cannot report it to you, and (ii) it cannot preserve the value of @code{CC} for subsequent runs. Autoconf faced exactly the same problem, and solved it by asking users to pass the variable definitions as command line arguments. Autotest requires this rule, too, but has no means to enforce it; the log then contains a trace of the variables that were changed by the user. @item @file{ChangeLog} excerpts The topmost lines of all the @file{ChangeLog} files found in the source hierarchy. This is especially useful when bugs are reported against development versions of the package, since the version string does not provide sufficient information to know the exact state of the sources the user compiled. Of course, this relies on the use of a @file{ChangeLog}. @item build machine Running a test suite in a cross-compile environment is not an easy task, since it would mean having the test suite run on a machine @var{build}, while running programs on a machine @var{host}. It is much simpler to run both the test suite and the programs on @var{host}, but then, from the point of view of the test suite, there remains a single environment, @var{host} = @var{build}. The log contains relevant information on the state of the @var{build} machine, including some important environment variables. @c FIXME: How about having an M4sh macro to say `hey, log the value @c of `@dots{}'? This would help both Autoconf and Autotest. @item tested programs The absolute file name and answers to @option{--version} of the tested programs (see @ref{Writing Testsuites}, @code{AT_TESTED}). @item configuration log The contents of @file{config.log}, as created by @command{configure}, are appended. It contains the configuration flags and a detailed report on the configuration itself. @end table @node Writing Testsuites @section Writing @file{testsuite.at} The @file{testsuite.at} is a Bourne shell script making use of special Autotest M4 macros. It often contains a call to @code{AT_INIT} near its beginning followed by one call to @code{m4_include} per source file for tests. Each such included file, or the remainder of @file{testsuite.at} if include files are not used, contain a sequence of test groups. Each test group begins with a call to @code{AT_SETUP}, then an arbitrary number of shell commands or calls to @code{AT_CHECK}, and then completes with a call to @code{AT_CLEANUP}. Multiple test groups can be categorized by a call to @code{AT_BANNER}. All of the public Autotest macros have all-uppercase names in the namespace @samp{^AT_} to prevent them from accidentally conflicting with other text; Autoconf also reserves the namespace @samp{^_AT_} for internal macros. All shell variables used in the testsuite for internal purposes have mostly-lowercase names starting with @samp{at_}. Autotest also uses here-document delimiters in the namespace @samp{^_AT[A-Z]}, and makes use of the file system namespace @samp{^at-}. Since Autoconf is built on top of M4sugar (@pxref{Programming in M4sugar}) and M4sh (@pxref{Programming in M4sh}), you must also be aware of those namespaces (@samp{^_?\(m4\|AS\)_}). In general, you @emph{should not use} the namespace of a package that does not own the macro or shell code you are writing. @defmac AT_INIT (@ovar{name}) @atindex{INIT} @c FIXME: Not clear, plus duplication of the information. Initialize Autotest. Giving a @var{name} to the test suite is encouraged if your package includes several test suites. Before this macro is called, @code{AT_PACKAGE_STRING} and @code{AT_PACKAGE_BUGREPORT} must be defined, which are used to display information about the testsuite to the user. Typically, these macros are provided by a file @file{package.m4} built by @command{make} (@pxref{Making testsuite Scripts}), in order to inherit the package name, version, and bug reporting address from @file{configure.ac}. @end defmac @defmac AT_COPYRIGHT (@var{copyright-notice}) @atindex{COPYRIGHT} @cindex Copyright Notice State that, in addition to the Free Software Foundation's copyright on the Autotest macros, parts of your test suite are covered by @var{copyright-notice}. The @var{copyright-notice} shows up in both the head of @command{testsuite} and in @samp{testsuite --version}. @end defmac @defmac AT_ARG_OPTION (@var{options}, @var{help-text}, @ @ovar{action-if-given}, @ovar{action-if-not-given}) @atindex{ARG_OPTION} @vrindex at_arg_@var{option} Accept options from the space-separated list @var{options}, a list that has leading dashes removed from the options. Long options will be prefixed with @samp{--}, single-character options with @samp{-}. The first word in this list is the primary @var{option}, any others are assumed to be short-hand aliases. The variable associated with it is @code{at_arg_@var{option}}, with any dashes in @var{option} replaced with underscores. If the user passes @option{--@var{option}} to the @command{testsuite}, the variable will be set to @samp{:}. If the user does not pass the option, or passes @option{--no-@var{option}}, then the variable will be set to @samp{false}. @vrindex at_optarg @vrindex at_optarg_@var{option} @var{action-if-given} is run each time the option is encountered; here, the variable @code{at_optarg} will be set to @samp{:} or @samp{false} as appropriate. @code{at_optarg} is actually just a copy of @code{at_arg_@var{option}}. @var{action-if-not-given} will be run once after option parsing is complete and if no option from @var{options} was used. @var{help-text} is added to the end of the list of options shown in @command{testsuite --help} (@pxref{AS_HELP_STRING}). It is recommended that you use a package-specific prefix to @var{options} names in order to avoid clashes with future Autotest built-in options. @end defmac @defmac AT_ARG_OPTION_ARG (@var{options}, @var{help-text}, @ @ovar{action-if-given}, @ovar{action-if-not-given}) @atindex{ARG_OPTION_ARG} @vrindex at_arg_@var{option} Accept options with arguments from the space-separated list @var{options}, a list that has leading dashes removed from the options. Long options will be prefixed with @samp{--}, single-character options with @samp{-}. The first word in this list is the primary @var{option}, any others are assumed to be short-hand aliases. The variable associated with it is @code{at_arg_@var{option}}, with any dashes in @var{option} replaced with underscores. If the user passes @option{--@var{option}=@var{arg}} or @option{--@var{option} @var{arg}} to the @command{testsuite}, the variable will be set to @samp{@var{arg}}. @vrindex at_optarg @var{action-if-given} is run each time the option is encountered; here, the variable @code{at_optarg} will be set to @samp{@var{arg}}. @code{at_optarg} is actually just a copy of @code{at_arg_@var{option}}. @var{action-if-not-given} will be run once after option parsing is complete and if no option from @var{options} was used. @var{help-text} is added to the end of the list of options shown in @command{testsuite --help} (@pxref{AS_HELP_STRING}). It is recommended that you use a package-specific prefix to @var{options} names in order to avoid clashes with future Autotest built-in options. @end defmac @defmac AT_COLOR_TESTS @atindex{COLOR_TESTS} Enable colored test results by default when the output is connected to a terminal. @end defmac @defmac AT_TESTED (@var{executables}) @atindex{TESTED} Log the file name and answer to @option{--version} of each program in space-separated list @var{executables}. Several invocations register new executables, in other words, don't fear registering one program several times. Autotest test suites rely on @env{PATH} to find the tested program. This avoids the need to generate absolute names of the various tools, and makes it possible to test installed programs. Therefore, knowing which programs are being exercised is crucial to understanding problems in the test suite itself, or its occasional misuses. It is a good idea to also subscribe foreign programs you depend upon, to avoid incompatible diagnostics. @var{executables} is implicitly wrapped in shell double quotes, but it will still use shell variable expansion (@samp{$}), command substitution (@samp{`}), and backslash escaping (@samp{\}). In particular, the @env{EXEEXT} variable is available if it is passed to the testsuite via @file{atlocal} or @file{atconfig}. @end defmac @sp 1 @defmac AT_BANNER (@var{test-category-name}) @atindex{BANNER} This macro identifies the start of a category of related test groups. When the resulting @file{testsuite} is invoked with more than one test group to run, its output will include a banner containing @var{test-category-name} prior to any tests run from that category. The banner should be no more than about 40 or 50 characters. A blank banner indicates uncategorized tests; an empty line will be inserted after tests from an earlier category, effectively ending that category. @end defmac @defmac AT_SETUP (@var{test-group-name}) @atindex{SETUP} This macro starts a group of related tests, all to be executed in the same subshell. It accepts a single argument, which holds a few words (no more than about 30 or 40 characters) quickly describing the purpose of the test group being started. @var{test-group-name} must not expand to unbalanced quotes, although quadrigraphs can be used. @end defmac @defmac AT_KEYWORDS (@var{keywords}) @atindex{KEYWORDS} Associate the space-separated list of @var{keywords} to the enclosing test group. This makes it possible to run ``slices'' of the test suite. For instance, if some of your test groups exercise some @samp{foo} feature, then using @samp{AT_KEYWORDS(foo)} lets you run @samp{./testsuite -k foo} to run exclusively these test groups. The @var{test-group-name} of the test group is automatically recorded to @code{AT_KEYWORDS}. Several invocations within a test group accumulate new keywords. In other words, don't fear registering the same keyword several times in a test group. @end defmac @defmac AT_CAPTURE_FILE (@var{file}) @atindex{CAPTURE_FILE} If the current test group fails, log the contents of @var{file}. Several identical calls within one test group have no additional effect. @end defmac @defmac AT_FAIL_IF (@var{shell-condition}) @atindex{FAIL_IF} Make the test group fail and skip the rest of its execution, if @var{shell-condition} is true. @var{shell-condition} is a shell expression such as a @code{test} command. Tests before @command{AT_FAIL_IF} will be executed and may still cause the test group to be skipped. You can instantiate this macro many times from within the same test group. You should use this macro only for very simple failure conditions. If the @var{shell-condition} could emit any kind of output you should instead use @command{AT_CHECK} like @example AT_CHECK([if @var{shell-condition}; then exit 99; fi]) @end example @noindent so that such output is properly recorded in the @file{testsuite.log} file. @end defmac @defmac AT_SKIP_IF (@var{shell-condition}) @atindex{SKIP_IF} Determine whether the test should be skipped because it requires features that are unsupported on the machine under test. @var{shell-condition} is a shell expression such as a @code{test} command. Tests before @command{AT_SKIP_IF} will be executed and may still cause the test group to fail. You can instantiate this macro many times from within the same test group. You should use this macro only for very simple skip conditions. If the @var{shell-condition} could emit any kind of output you should instead use @command{AT_CHECK} like @example AT_CHECK([if @var{shell-condition}; then exit 77; fi]) @end example @noindent so that such output is properly recorded in the @file{testsuite.log} file. @end defmac @defmac AT_XFAIL_IF (@var{shell-condition}) @atindex{XFAIL_IF} Determine whether the test is expected to fail because it is a known bug (for unsupported features, you should skip the test). @var{shell-condition} is a shell expression such as a @code{test} command; you can instantiate this macro many times from within the same test group, and one of the conditions is enough to turn the test into an expected failure. @end defmac @defmac AT_CLEANUP @atindex{CLEANUP} End the current test group. @end defmac @sp 1 @defmac AT_DATA (@var{file}, @var{contents}) @defmacx AT_DATA_UNQUOTED (@var{file}, @var{contents}) @atindex{DATA} Initialize an input data @var{file} with given @var{contents}. Of course, the @var{contents} have to be properly quoted between square brackets to protect against included commas or spurious M4 expansion. @var{contents} must be empty or end with a newline. @var{file} must be a single shell word that expands into a single file name. The difference between @code{AT_DATA} and @code{AT_DATA_UNQUOTED} is that only the latter performs shell variable expansion (@samp{$}), command substitution (@samp{`}), and backslash escaping (@samp{\}) on @var{contents}. @end defmac @defmac AT_CHECK (@var{commands}, @dvar{status, 0}, @ovar{stdout}, @ @ovar{stderr}, @ovar{run-if-fail}, @ovar{run-if-pass}) @defmacx AT_CHECK_UNQUOTED (@var{commands}, @dvar{status, 0}, @ovar{stdout}, @ @ovar{stderr}, @ovar{run-if-fail}, @ovar{run-if-pass}) @atindex{CHECK} @atindex{CHECK_UNQUOTED} @vrindex at_status Execute a test by performing given shell @var{commands} in a subshell. @var{commands} is output as-is, so shell expansions are honored. These commands should normally exit with @var{status}, while producing expected @var{stdout} and @var{stderr} contents. If @var{commands} exit with unexpected status 77, then the rest of the test group is skipped. If @var{commands} exit with unexpected status 99, then the test group is immediately failed. Otherwise, if this test fails, run shell commands @var{run-if-fail} or, if this test passes, run shell commands @var{run-if-pass}, both inside the current shell execution environment. At the beginning of @var{run-if-fail} and @var{run-if-pass}, the status of @var{commands} is available in the @code{at_status} shell variable. This macro must be invoked in between @code{AT_SETUP} and @code{AT_CLEANUP}. If @var{status} is the literal @samp{ignore}, then the corresponding exit status is not checked, except for the special cases of 77 (skip) and 99 (hard failure). The existence of hard failures allows one to mark a test as an expected failure with @code{AT_XFAIL_IF} because a feature has not yet been implemented, but to still distinguish between gracefully handling the missing feature and dumping core. A hard failure also inhibits post-test actions in @var{run-if-fail}. If the value of the @var{stdout} or @var{stderr} parameter is one of the literals in the following table, then the test treats the output according to the rules of that literal. Otherwise, the value of the parameter is treated as text that must exactly match the output given by @var{commands} on standard output and standard error (including an empty parameter for no output); any differences are captured in the testsuite log and the test is failed (unless an unexpected exit status of 77 skipped the test instead). The difference between @code{AT_CHECK} and @code{AT_CHECK_UNQUOTED} is that only the latter performs shell variable expansion (@samp{$}), command substitution (@samp{`}), and backslash escaping (@samp{\}) on comparison text given in the @var{stdout} and @var{stderr} arguments; if the text includes a trailing newline, this would be the same as if it were specified via an unquoted here-document. (However, there is no difference in the interpretation of @var{commands}). @table @samp @item ignore The content of the output is ignored, but still captured in the test group log (if the testsuite is run with the @option{-v} option, the test group log is displayed as the test is run; if the test group later fails, the test group log is also copied into the overall testsuite log). This action is valid for both @var{stdout} and @var{stderr}. @item ignore-nolog The content of the output is ignored, and nothing is captured in the log files. If @var{commands} are likely to produce binary output (including long lines) or large amounts of output, then logging the output can make it harder to locate details related to subsequent tests within the group, and could potentially corrupt terminal display of a user running @command{testsuite -v}. @item stdout For the @var{stdout} parameter, capture the content of standard output to both the file @file{stdout} and the test group log. Subsequent commands in the test group can then post-process the file. This action is often used when it is desired to use @command{grep} to look for a substring in the output, or when the output must be post-processed to normalize error messages into a common form. @item stderr Like @samp{stdout}, except that it only works for the @var{stderr} parameter, and the standard error capture file will be named @file{stderr}. @item stdout-nolog @itemx stderr-nolog Like @samp{stdout} or @samp{stderr}, except that the captured output is not duplicated into the test group log. This action is particularly useful for an intermediate check that produces large amounts of data, which will be followed by another check that filters down to the relevant data, as it makes it easier to locate details in the log. @item expout For the @var{stdout} parameter, compare standard output contents with the previously created file @file{expout}, and list any differences in the testsuite log. @item experr Like @samp{expout}, except that it only works for the @var{stderr} parameter, and the standard error contents are compared with @file{experr}. @end table @end defmac @defmac AT_CHECK_EUNIT (@var{module}, @var{test-spec}, @ovar{erlflags}, @ @ovar{run-if-fail}, @ovar{run-if-pass}) @atindex{CHECK_EUNIT} Initialize and execute an Erlang module named @var{module} that performs tests following the @var{test-spec} EUnit test specification. @var{test-spec} must be a valid EUnit test specification, as defined in the @uref{https://@/erlang.org/@/doc/@/apps/@/eunit/@/index.html, EUnit Reference Manual}. @var{erlflags} are optional command-line options passed to the Erlang interpreter to execute the test Erlang module. Typically, @var{erlflags} defines at least the paths to directories containing the compiled Erlang modules under test, as @samp{-pa path1 path2 ...}. For example, the unit tests associated with Erlang module @samp{testme}, which compiled code is in subdirectory @file{src}, can be performed with: @example AT_CHECK_EUNIT([testme_testsuite], [@{module, testme@}], [-pa "$@{abs_top_builddir@}/src"]) @end example This macro must be invoked in between @code{AT_SETUP} and @code{AT_CLEANUP}. Variables @code{ERL}, @code{ERLC}, and (optionally) @code{ERLCFLAGS} must be defined as the path of the Erlang interpreter, the path of the Erlang compiler, and the command-line flags to pass to the compiler, respectively. Those variables should be configured in @file{configure.ac} using the @command{AC_ERLANG_PATH_ERL} and @command{AC_ERLANG_PATH_ERLC} macros, and the configured values of those variables are automatically defined in the testsuite. If @code{ERL} or @code{ERLC} is not defined, the test group is skipped. If the EUnit library cannot be found, i.e. if module @code{eunit} cannot be loaded, the test group is skipped. Otherwise, if @var{test-spec} is an invalid EUnit test specification, the test group fails. Otherwise, if the EUnit test passes, shell commands @var{run-if-pass} are executed or, if the EUnit test fails, shell commands @var{run-if-fail} are executed and the test group fails. Only the generated test Erlang module is automatically compiled and executed. If @var{test-spec} involves testing other Erlang modules, e.g. module @samp{testme} in the example above, those modules must be already compiled. If the testsuite is run in verbose mode and with the @option{--verbose} option, EUnit is also run in verbose mode to output more details about individual unit tests. @end defmac @node testsuite Invocation @section Running @command{testsuite} Scripts @cindex @command{testsuite} Autotest test suites support the following options: @table @option @item --help @itemx -h Display the list of options and exit successfully. @item --version @itemx -V Display the version of the test suite and exit successfully. @item --directory=@var{dir} @itemx -C @var{dir} Change the current directory to @var{dir} before creating any files. Useful for running the testsuite in a subdirectory from a top-level Makefile. @item --jobs@r{[}=@var{n}@r{]} @itemx -j@ovar{n} Run @var{n} tests in parallel, if possible. If @var{n} is not given, run all given tests in parallel. Note that there should be no space before the argument to @option{-j}, as @option{-j @var{number}} denotes the separate arguments @option{-j} and @option{@var{number}}, see below. In parallel mode, the standard input device of the testsuite script is not available to commands inside a test group. Furthermore, banner lines are not printed, and the summary line for each test group is output after the test group completes. Summary lines may appear unordered. If verbose and trace output are enabled (see below), they may appear intermixed from concurrently running tests. Parallel mode requires the @command{mkfifo} command to work, and will be silently disabled otherwise. @item --clean @itemx -c Remove all the files the test suite might have created and exit. Meant for @code{clean} Make targets. @item --list @itemx -l List all the tests (or only the selection), including their possible keywords. @end table @sp 1 By default all tests are performed (or described with @option{--list}) silently in the default environment, but the environment, set of tests, and verbosity level can be tuned: @table @samp @item @var{variable}=@var{value} Set the environment @var{variable} to @var{value}. Use this rather than @samp{FOO=foo ./testsuite} as debugging scripts would then run in a different environment. @cindex @code{AUTOTEST_PATH} The variable @code{AUTOTEST_PATH} specifies the testing path to prepend to @env{PATH}. Relative directory names (not starting with @samp{/}) are considered to be relative to the top level of the package being built. All directories are made absolute, first starting from the top level @emph{build} tree, then from the @emph{source} tree. For instance @samp{./testsuite AUTOTEST_PATH=tests:bin} for a @file{/src/foo-1.0} source package built in @file{/tmp/foo} results in @samp{/tmp/foo/tests:/tmp/foo/bin} and then @samp{/src/foo-1.0/tests:/src/foo-1.0/bin} being prepended to @env{PATH}. @item @var{number} @itemx @var{number}-@var{number} @itemx @var{number}- @itemx -@var{number} Add the corresponding test groups, with obvious semantics, to the selection. @item --keywords=@var{keywords} @itemx -k @var{keywords} Add to the selection the test groups with title or keywords (arguments to @code{AT_SETUP} or @code{AT_KEYWORDS}) that match @emph{all} keywords of the comma separated list @var{keywords}, case-insensitively. Use @samp{!} immediately before the keyword to invert the selection for this keyword. By default, the keywords match whole words; enclose them in @samp{.*} to also match parts of words. For example, running @example @kbd{./testsuite -k 'autoupdate,.*FUNC.*'} @end example @noindent selects all tests tagged @samp{autoupdate} @emph{and} with tags containing @samp{FUNC} (as in @samp{AC_CHECK_FUNC}, @samp{AC_FUNC_ALLOCA}, etc.), while @example @kbd{./testsuite -k '!autoupdate' -k '.*FUNC.*'} @end example @noindent selects all tests not tagged @samp{autoupdate} @emph{or} with tags containing @samp{FUNC}. @item --errexit @itemx -e If any test fails, immediately abort testing. This implies @option{--debug}: post test group clean up, and top-level logging are inhibited. This option is meant for the full test suite, it is not really useful for generated debugging scripts. If the testsuite is run in parallel mode using @option{--jobs}, then concurrently running tests will finish before exiting. @item --verbose @itemx -v Force more verbosity in the detailed output of what is being done. This is the default for debugging scripts. @item --color @itemx --color@r{[}=never@r{|}auto@r{|}always@r{]} Enable colored test results. Without an argument, or with @samp{always}, test results will be colored. With @samp{never}, color mode is turned off. Otherwise, if either the macro @code{AT_COLOR_TESTS} is used by the testsuite author, or the argument @samp{auto} is given, then test results are colored if standard output is connected to a terminal. @item --debug @itemx -d Do not remove the files after a test group was performed---but they are still removed @emph{before}, therefore using this option is sane when running several test groups. Create debugging scripts. Do not overwrite the top-level log (in order to preserve a supposedly existing full log file). This is the default for debugging scripts, but it can also be useful to debug the testsuite itself. @item --recheck Add to the selection all test groups that failed or passed unexpectedly during the last non-debugging test run. @item --trace @itemx -x Trigger shell tracing of the test groups. @end table Besides these options accepted by every Autotest testsuite, the testsuite author might have added package-specific options via the @code{AT_ARG_OPTION} and @code{AT_ARG_OPTION_ARG} macros (@pxref{Writing Testsuites}); refer to @command{testsuite --help} and the package documentation for details. @node Making testsuite Scripts @section Making @command{testsuite} Scripts For putting Autotest into movement, you need some configuration and makefile machinery. We recommend, at least if your package uses deep or shallow hierarchies, that you use @file{tests/} as the name of the directory holding all your tests and their makefile. Here is a check list of things to do, followed by an example, taking into consideration whether you are also using Automake. @itemize @minus @item @cindex @file{package.m4} @atindex{PACKAGE_STRING} @atindex{PACKAGE_BUGREPORT} @atindex{PACKAGE_NAME} @atindex{PACKAGE_TARNAME} @atindex{PACKAGE_VERSION} @atindex{PACKAGE_URL} Make sure to create the file @file{package.m4}, which defines the identity of the package. It must define @code{AT_PACKAGE_STRING}, the full signature of the package, and @code{AT_PACKAGE_BUGREPORT}, the address to which bug reports should be sent. For sake of completeness, we suggest that you also define @code{AT_PACKAGE_NAME}, @code{AT_PACKAGE_TARNAME}, @code{AT_PACKAGE_VERSION}, and @code{AT_PACKAGE_URL}. @xref{Initializing configure}, for a description of these variables. Be sure to distribute @file{package.m4} and to put it into the source hierarchy: the test suite ought to be shipped! See below for an example. @item Invoke @code{AC_CONFIG_TESTDIR} in your @file{configure.ac}. @defmac AC_CONFIG_TESTDIR (@var{directory}, @dvarv{test-path, directory}) @acindex{CONFIG_TESTDIR} An Autotest test suite is to be configured in @var{directory}. This macro causes @file{@var{directory}/atconfig} to be created by @command{config.status} and sets the default @code{AUTOTEST_PATH} to @var{test-path} (@pxref{testsuite Invocation}). @end defmac @item Still within @file{configure.ac}, as appropriate, ensure that some @code{AC_CONFIG_FILES} command includes substitution for @file{tests/atlocal}. @item Also within your @file{configure.ac}, arrange for the @code{AUTOM4TE} variable to be set. @item The appropriate @file{Makefile} should be modified so the validation in your package is triggered by @samp{make check}. @end itemize The following example demonstrates the above checklist, first by assuming that you are using Automake (see below for tweaks to make to get the same results without Automake). Begin by adding the following lines to your @file{configure.ac}: @example # Initialize the test suite. AC_CONFIG_TESTDIR([tests]) AC_CONFIG_FILES([tests/Makefile tests/atlocal]) AM_MISSING_PROG([AUTOM4TE], [autom4te]) @end example Next, add the following lines to your @file{tests/Makefile.am}, in order to link @samp{make check} with a validation suite. @example # The ':;' works around a Bash 3.2 bug when the output is not writable. $(srcdir)/package.m4: $(top_srcdir)/configure.ac :;@{ \ echo '# Signature of the current package.' && \ echo 'm4_define([AT_PACKAGE_NAME],' && \ echo ' [$(PACKAGE_NAME)])' && \ echo 'm4_define([AT_PACKAGE_TARNAME],' && \ echo ' [$(PACKAGE_TARNAME)])' && \ echo 'm4_define([AT_PACKAGE_VERSION],' && \ echo ' [$(PACKAGE_VERSION)])' && \ echo 'm4_define([AT_PACKAGE_STRING],' && \ echo ' [$(PACKAGE_STRING)])' && \ echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \ echo ' [$(PACKAGE_BUGREPORT)])'; \ echo 'm4_define([AT_PACKAGE_URL],' && \ echo ' [$(PACKAGE_URL)])'; \ @} >'$(srcdir)/package.m4' EXTRA_DIST = testsuite.at $(srcdir)/package.m4 $(TESTSUITE) atlocal.in TESTSUITE = $(srcdir)/testsuite check-local: atconfig atlocal $(TESTSUITE) $(SHELL) '$(TESTSUITE)' $(TESTSUITEFLAGS) installcheck-local: atconfig atlocal $(TESTSUITE) $(SHELL) '$(TESTSUITE)' AUTOTEST_PATH='$(bindir)' \ $(TESTSUITEFLAGS) clean-local: test ! -f '$(TESTSUITE)' || \ $(SHELL) '$(TESTSUITE)' --clean AUTOTEST = $(AUTOM4TE) --language=autotest $(TESTSUITE): $(srcdir)/testsuite.at $(srcdir)/package.m4 $(AUTOTEST) -I '$(srcdir)' -o $@@.tmp $@@.at mv $@@.tmp $@@ @end example Note that the built testsuite is distributed; this is necessary because users might not have Autoconf installed, and thus would not be able to rebuild it. Likewise, the use of Automake's @code{AM_MISSING_PROG} will arrange for the definition of @code{$AUTOM4TE} within the Makefile to provide the user with a nicer error message if they modify a source file to the testsuite, and accidentally trigger the rebuild rules. You might want to list explicitly the dependencies, i.e., the list of the files @file{testsuite.at} includes. If you don't use Automake, you should make the following tweaks. In your @file{configure.ac}, replace the @code{AM_MISSING_PROG} line above with @code{AC_PATH_PROG([AUTOM4TE], [autom4te], [false])}. You are welcome to also try using the @command{missing} script from the Automake project instead of @command{false}, to try to get a nicer error message when the user modifies prerequisites but did not have Autoconf installed, but at that point you may be better off using Automake. Then, take the code suggested above for @file{tests/@/Makefile.am} and place it in your @file{tests/@/Makefile.in} instead. Add code to your @file{tests/@/Makefile.in} to ensure that @code{$(EXTRA_DIST)} files are distributed, as well as adding the following additional lines to prepare the set of needed Makefile variables: @example subdir = tests PACKAGE_NAME = @@PACKAGE_NAME@@ PACKAGE_TARNAME = @@PACKAGE_TARNAME@@ PACKAGE_VERSION = @@PACKAGE_VERSION@@ PACKAGE_STRING = @@PACKAGE_STRING@@ PACKAGE_BUGREPORT = @@PACKAGE_BUGREPORT@@ PACKAGE_URL = @@PACKAGE_URL@@ AUTOM4TE = @@AUTOM4TE@@ atconfig: $(top_builddir)/config.status cd $(top_builddir) && \ $(SHELL) ./config.status $(subdir)/$@@ atlocal: $(srcdir)/atlocal.in $(top_builddir)/config.status cd $(top_builddir) && \ $(SHELL) ./config.status $(subdir)/$@@ @end example Using the above example (with or without Automake), and assuming you were careful to not initialize @samp{TESTSUITEFLAGS} within your makefile, you can now fine-tune test suite execution at runtime by altering this variable, for example: @example make check TESTSUITEFLAGS='-v -d -x 75 -k AC_PROG_CC CFLAGS=-g' @end example @c =============================== Frequent Autoconf Questions, with answers @node FAQ @chapter Frequent Autoconf Questions, with answers Several questions about Autoconf come up occasionally. Here some of them are addressed. @menu * Distributing:: Distributing @command{configure} scripts * Why GNU M4:: Why not use the standard M4? * Bootstrapping:: Autoconf and GNU M4 require each other? * Why Not Imake:: Why GNU uses @command{configure} instead of Imake * Defining Directories:: Passing @code{datadir} to program * Autom4te Cache:: What is it? Can I remove it? * Present But Cannot Be Compiled:: Compiler and Preprocessor Disagree * Expanded Before Required:: Expanded Before Required * Debugging:: Debugging @command{configure} scripts @end menu @node Distributing @section Distributing @command{configure} Scripts @cindex License @display What are the restrictions on distributing @command{configure} scripts that Autoconf generates? How does that affect my programs that use them? @end display There are no restrictions on how the configuration scripts that Autoconf produces may be distributed or used. In Autoconf version 1, they were covered by the GNU General Public License. We still encourage software authors to distribute their work under terms like those of the GPL, but doing so is not required to use Autoconf. Of the other files that might be used with @command{configure}, @file{config.h.in} is under whatever copyright you use for your @file{configure.ac}. @file{config.sub} and @file{config.guess} have an exception to the GPL when they are used with an Autoconf-generated @command{configure} script, which permits you to distribute them under the same terms as the rest of your package. @file{install-sh} is from the X Consortium and is not copyrighted. @node Why GNU M4 @section Why Require GNU M4? @display Why does Autoconf require GNU M4? @end display Many M4 implementations have hard-coded limitations on the size and number of macros that Autoconf exceeds. They also lack several builtin macros that it would be difficult to get along without in a sophisticated application like Autoconf, including: @example m4_builtin m4_indir m4_bpatsubst __file__ __line__ @end example Autoconf requires version 1.4.6 or later of GNU M4. Since only software maintainers need to use Autoconf, and since GNU M4 is simple to configure and install, it seems reasonable to require GNU M4 to be installed also. Many maintainers of GNU and other free software already have most of the GNU utilities installed, since they prefer them. @node Bootstrapping @section How Can I Bootstrap? @cindex Bootstrap @display If Autoconf requires GNU M4 and GNU M4 has an Autoconf @command{configure} script, how do I bootstrap? It seems like a chicken and egg problem! @end display This is a misunderstanding. Although GNU M4 does come with a @command{configure} script produced by Autoconf, Autoconf is not required in order to run the script and install GNU M4. Autoconf is only required if you want to change the M4 @command{configure} script, which few people have to do (mainly its maintainer). @node Why Not Imake @section Why Not Imake? @cindex Imake @display Why not use Imake instead of @command{configure} scripts? @end display Several people have written addressing this question, so adaptations of their explanations are included here. The following answer is based on one written by Richard Pixley: @quotation Autoconf generated scripts frequently work on machines that it has never been set up to handle before. That is, it does a good job of inferring a configuration for a new system. Imake cannot do this. Imake uses a common database of host specific data. For X11, this makes sense because the distribution is made as a collection of tools, by one central authority who has control over the database. GNU tools are not released this way. Each GNU tool has a maintainer; these maintainers are scattered across the world. Using a common database would be a maintenance nightmare. Autoconf may appear to be this kind of database, but in fact it is not. Instead of listing host dependencies, it lists program requirements. If you view the GNU suite as a collection of native tools, then the problems are similar. But the GNU development tools can be configured as cross tools in almost any host+target permutation. All of these configurations can be installed concurrently. They can even be configured to share host independent files across hosts. Imake doesn't address these issues. Imake templates are a form of standardization. The GNU coding standards address the same issues without necessarily imposing the same restrictions. @end quotation Here is some further explanation, written by Per Bothner: @quotation One of the advantages of Imake is that it is easy to generate large makefiles using the @samp{#include} and macro mechanisms of @command{cpp}. However, @code{cpp} is not programmable: it has limited conditional facilities, and no looping. And @code{cpp} cannot inspect its environment. All of these problems are solved by using @code{sh} instead of @code{cpp}. The shell is fully programmable, has macro substitution, can execute (or source) other shell scripts, and can inspect its environment. @end quotation Paul Eggert elaborates more: @quotation With Autoconf, installers need not assume that Imake itself is already installed and working well. This may not seem like much of an advantage to people who are accustomed to Imake. But on many hosts Imake is not installed or the default installation is not working well, and requiring Imake to install a package hinders the acceptance of that package on those hosts. For example, the Imake template and configuration files might not be installed properly on a host, or the Imake build procedure might wrongly assume that all source files are in one big directory tree, or the Imake configuration might assume one compiler whereas the package or the installer needs to use another, or there might be a version mismatch between the Imake expected by the package and the Imake supported by the host. These problems are much rarer with Autoconf, where each package comes with its own independent configuration processor. Also, Imake often suffers from unexpected interactions between @command{make} and the installer's C preprocessor. The fundamental problem here is that the C preprocessor was designed to preprocess C programs, not makefiles. This is much less of a problem with Autoconf, which uses the general-purpose preprocessor M4, and where the package's author (rather than the installer) does the preprocessing in a standard way. @end quotation Finally, Mark Eichin notes: @quotation Imake isn't all that extensible, either. In order to add new features to Imake, you need to provide your own project template, and duplicate most of the features of the existing one. This means that for a sophisticated project, using the vendor-provided Imake templates fails to provide any leverage---since they don't cover anything that your own project needs (unless it is an X11 program). On the other side, though: The one advantage that Imake has over @command{configure}: @file{Imakefile} files tend to be much shorter (likewise, less redundant) than @file{Makefile.in} files. There is a fix to this, however---at least for the Kerberos V5 tree, we've modified things to call in common @file{post.in} and @file{pre.in} makefile fragments for the entire tree. This means that a lot of common things don't have to be duplicated, even though they normally are in @command{configure} setups. @end quotation @node Defining Directories @section How Do I @code{#define} Installation Directories? @display My program needs library files, installed in @code{datadir} and similar. If I use @example AC_DEFINE_UNQUOTED([DATADIR], [$datadir], [Define to the read-only architecture-independent data directory.]) @end example @noindent I get @example #define DATADIR "$@{prefix@}/share" @end example @end display As already explained, this behavior is on purpose, mandated by the GNU Coding Standards, see @ref{Installation Directory Variables}. There are several means to achieve a similar goal: @itemize @minus @item Do not use @code{AC_DEFINE} but use your makefile to pass the actual value of @code{datadir} via compilation flags. @xref{Installation Directory Variables}, for the details. @item This solution can be simplified when compiling a program: you may either extend the @code{CPPFLAGS}: @example CPPFLAGS = -DDATADIR='"$(datadir)"' @@CPPFLAGS@@ @end example @noindent If you are using Automake, you should use @code{AM_CPPFLAGS} instead: @example AM_CPPFLAGS = -DDATADIR='"$(datadir)"' @end example @noindent Alternatively, create a dedicated header file: @example DISTCLEANFILES = myprog-paths.h myprog-paths.h: Makefile echo '#define DATADIR "$(datadir)"' >$@@ @end example @noindent The Gnulib module @samp{configmake} provides such a header with all the standard directory variables defined, @pxref{configmake,,, gnulib, GNU Gnulib}. @item Use @code{AC_DEFINE} but have @command{configure} compute the literal value of @code{datadir} and others. Many people have wrapped macros to automate this task; for an example, see the macro @code{AC_DEFINE_DIR} from the @uref{https://@/www.gnu.org/@/software/@/autoconf-archive/, Autoconf Macro Archive}. This solution does not conform to the GNU Coding Standards. @item Note that all the previous solutions hard wire the absolute name of these directories in the executables, which is not a good property. You may try to compute the names relative to @code{prefix}, and try to find @code{prefix} at runtime, this way your package is relocatable. @end itemize @node Autom4te Cache @section What is @file{autom4te.cache}? @display What is this directory @file{autom4te.cache}? Can I safely remove it? @end display In the GNU Build System, @file{configure.ac} plays a central role and is read by many tools: @command{autoconf} to create @file{configure}, @command{autoheader} to create @file{config.h.in}, @command{automake} to create @file{Makefile.in}, @command{autoscan} to check the completeness of @file{configure.ac}, @command{autoreconf} to check the GNU Build System components that are used. To ``read @file{configure.ac}'' actually means to compile it with M4, which can be a long process for complex @file{configure.ac}. This is why all these tools, instead of running directly M4, invoke @command{autom4te} (@pxref{autom4te Invocation}) which, while answering to a specific demand, stores additional information in @file{autom4te.cache} for future runs. For instance, if you run @command{autoconf}, behind the scenes, @command{autom4te} also stores information for the other tools, so that when you invoke @command{autoheader} or @command{automake} etc., reprocessing @file{configure.ac} is not needed. The speed up is frequently 30%, and is increasing with the size of @file{configure.ac}. But it is and remains being simply a cache: you can safely remove it. @sp 1 @display Can I permanently get rid of it? @end display The creation of this cache can be disabled from @file{~/.autom4te.cfg}, see @ref{Customizing autom4te}, for more details. You should be aware that disabling the cache slows down the Autoconf test suite by 40%. The more GNU Build System components are used, the more the cache is useful; for instance running @samp{autoreconf -f} on the Core Utilities is twice slower without the cache @emph{although @option{--force} implies that the cache is not fully exploited}, and eight times slower than without @option{--force}. @node Present But Cannot Be Compiled @section Header Present But Cannot Be Compiled The most important guideline to bear in mind when checking for features is to mimic as much as possible the intended use. Unfortunately, old versions of @code{AC_CHECK_HEADER} and @code{AC_CHECK_HEADERS} failed to follow this idea, and called the preprocessor, instead of the compiler, to check for headers. As a result, incompatibilities between headers went unnoticed during configuration, and maintainers finally had to deal with this issue elsewhere. The transition began with Autoconf 2.56. As of Autoconf 2.64 both checks are performed, and @command{configure} complains loudly if the compiler and the preprocessor do not agree. However, only the compiler result is considered. As of Autoconf 2.70, only the compiler check is performed. Consider the following example: @smallexample $ @kbd{cat number.h} typedef int number; $ @kbd{cat pi.h} const number pi = 3; $ @kbd{cat configure.ac} AC_INIT([Example], [1.0], [bug-example@@example.org]) AC_CHECK_HEADERS([pi.h]) $ @kbd{autoconf -Wall} $ @kbd{./configure CPPFLAGS='-I.'} checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... -std=gnu11 checking for sys/types.h... yes checking for sys/stat.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for pi.h... no @end smallexample @noindent The proper way to handle this case is using the fourth argument (@pxref{Generic Headers}): @example $ @kbd{cat configure.ac} AC_INIT([Example], [1.0], [bug-example@@example.org]) AC_CHECK_HEADERS([number.h pi.h], [], [], [[#ifdef HAVE_NUMBER_H # include #endif ]]) $ @kbd{autoconf -Wall} $ @kbd{./configure CPPFLAGS='-I.'} checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... -std=gnu11 checking for number.h... yes checking for pi.h... yes @end example See @ref{Particular Headers}, for a list of headers with their prerequisites. @node Expanded Before Required @section Expanded Before Required @cindex expanded before required Older versions of Autoconf silently built files with incorrect ordering between dependent macros if an outer macro first expanded, then later indirectly required, an inner macro. Starting with Autoconf 2.64, this situation no longer generates out-of-order code, but results in duplicate output and a syntax warning: @example $ @kbd{cat configure.ac} @result{}AC_DEFUN([TESTA], [[echo in A @result{}if test -n "$SEEN_A" ; then echo duplicate ; fi @result{}SEEN_A=:]]) @result{}AC_DEFUN([TESTB], [AC_REQUIRE([TESTA])[echo in B @result{}if test -z "$SEEN_A" ; then echo bug ; fi]]) @result{}AC_DEFUN([TESTC], [AC_REQUIRE([TESTB])[echo in C]]) @result{}AC_DEFUN([OUTER], [[echo in OUTER] @result{}TESTA @result{}TESTC]) @result{}AC_INIT @result{}OUTER @result{}AC_OUTPUT $ @kbd{autoconf} @result{}configure.ac:11: warning: AC_REQUIRE: @result{} `TESTA' was expanded before it was required @result{}configure.ac:4: TESTB is expanded from... @result{}configure.ac:6: TESTC is expanded from... @result{}configure.ac:7: OUTER is expanded from... @result{}configure.ac:11: the top level @end example @noindent To avoid this warning, decide what purpose the macro in question serves. If it only needs to be expanded once (for example, if it provides initialization text used by later macros), then the simplest fix is to change the macro to be declared with @code{AC_DEFUN_ONCE} (@pxref{One-Shot Macros}), although this only works in Autoconf 2.64 and newer. A more portable fix is to change all instances of direct calls to instead go through @code{AC_REQUIRE} (@pxref{Prerequisite Macros}). If, instead, the macro is parameterized by arguments or by the current definition of other macros in the m4 environment, then the macro should always be directly expanded instead of required. For another case study, consider this example trimmed down from an actual package. Originally, the package contained shell code and multiple macro invocations at the top level of @file{configure.ac}: @example AC_DEFUN([FOO], [AC_COMPILE_IFELSE([@dots{}])]) foobar= AC_PROG_CC FOO @end example @noindent but that was getting complex, so the author wanted to offload some of the text into a new macro in another file included via @file{aclocal.m4}. The na@"ive approach merely wraps the text in a new macro: @example AC_DEFUN([FOO], [AC_COMPILE_IFELSE([@dots{}])]) AC_DEFUN([BAR], [ foobar= AC_PROG_CC FOO ]) BAR @end example @noindent With older versions of Autoconf, the setting of @samp{foobar=} occurs before the single compiler check, as the author intended. But with Autoconf 2.64, this issues the ``expanded before it was required'' warning for @code{AC_PROG_CC}, and outputs two copies of the compiler check, one before @samp{foobar=}, and one after. To understand why this is happening, remember that the use of @code{AC_COMPILE_IFELSE} includes a call to @code{AC_REQUIRE([AC_PROG_CC])} under the hood. According to the documented semantics of @code{AC_REQUIRE}, this means that @code{AC_PROG_CC} @emph{must} occur before the body of the outermost @code{AC_DEFUN}, which in this case is @code{BAR}, thus preceding the use of @samp{foobar=}. The older versions of Autoconf were broken with regards to the rules of @code{AC_REQUIRE}, which explains why the code changed from one over to two copies of @code{AC_PROG_CC} when upgrading autoconf. In other words, the author was unknowingly relying on a bug exploit to get the desired results, and that exploit broke once the bug was fixed. So, what recourse does the author have, to restore their intended semantics of setting @samp{foobar=} prior to a single compiler check, regardless of whether Autoconf 2.63 or 2.64 is used? One idea is to remember that only @code{AC_DEFUN} is impacted by @code{AC_REQUIRE}; there is always the possibility of using the lower-level @code{m4_define}: @example AC_DEFUN([FOO], [AC_COMPILE_IFELSE([@dots{}])]) m4_define([BAR], [ foobar= AC_PROG_CC FOO ]) BAR @end example @noindent This works great if everything is in the same file. However, it does not help in the case where the author wants to have @command{aclocal} find the definition of @code{BAR} from its own file, since @command{aclocal} requires the use of @code{AC_DEFUN}. In this case, a better fix is to recognize that if @code{BAR} also uses @code{AC_REQUIRE}, then there will no longer be direct expansion prior to a subsequent require. Then, by creating yet another helper macro, the author can once again guarantee a single invocation of @code{AC_PROG_CC}, which will still occur after @code{foobar=}. The author can also use @code{AC_BEFORE} to make sure no other macro appearing before @code{BAR} has triggered an unwanted expansion of @code{AC_PROG_CC}. @example AC_DEFUN([FOO], [AC_COMPILE_IFELSE([@dots{}])]) AC_DEFUN([BEFORE_CC], [ foobar= ]) AC_DEFUN([BAR], [ AC_BEFORE([$0], [AC_PROG_CC])dnl AC_REQUIRE([BEFORE_CC])dnl AC_REQUIRE([AC_PROG_CC])dnl FOO ]) BAR @end example @node Debugging @section Debugging @command{configure} scripts While in general, @command{configure} scripts generated by Autoconf strive to be fairly portable to various systems, compilers, shells, and other tools, it may still be necessary to debug a failing test, broken script or makefile, or fix or override an incomplete, faulty, or erroneous test, especially during macro development. Failures can occur at all levels, in M4 syntax or semantics, shell script issues, or due to bugs in the test or the tools invoked by @command{configure}. Together with the rather arcane error message that @command{m4} and @command{make} may produce when their input contains syntax errors, this can make debugging rather painful. Nevertheless, here is a list of hints and strategies that may help: @itemize @item When @command{autoconf} fails, common causes for error include: @itemize @item mismatched or unbalanced parentheses or braces (@pxref{Balancing Parentheses}), @item under- or over-quoted macro arguments (@pxref{Autoconf Language}, @pxref{Quoting and Parameters}, @pxref{Quotation and Nested Macros}), @item spaces between macro name and opening parenthesis (@pxref{Autoconf Language}). @end itemize Typically, it helps to go back to the last working version of the input and compare the differences for each of these errors. Another possibility is to sprinkle pairs of @code{m4_traceon} and @code{m4_traceoff} judiciously in the code, either without a parameter or listing some macro names and watch @command{m4} expand its input verbosely (@pxref{Debugging via autom4te}). @item Sometimes @command{autoconf} succeeds but the generated @command{configure} script has invalid shell syntax. You can detect this case by running @samp{bash -n configure} or @samp{sh -n configure}. If this command fails, the same tips apply, as if @command{autoconf} had failed. @item Debugging @command{configure} script execution may be done by sprinkling pairs of @code{set -x} and @code{set +x} into the shell script before and after the region that contains a bug. Running the whole script with @samp{@var{shell} -vx ./configure 2>&1 | tee @var{log-file}} with a decent @var{shell} may work, but produces lots of output. Here, it can help to search for markers like @samp{checking for} a particular test in the @var{log-file}. @item Alternatively, you might use a shell with debugging capabilities like @uref{http://bashdb.sourceforge.net/, bashdb}. @item When @command{configure} tests produce invalid results for your system, it may be necessary to override them: @itemize @item For programs, tools or libraries variables, preprocessor, compiler, or linker flags, it is often sufficient to override them at @command{make} run time with some care (@pxref{Macros and Submakes}). Since this normally won't cause @command{configure} to be run again with these changed settings, it may fail if the changed variable would have caused different test results from @command{configure}, so this may work only for simple differences. @item Most tests which produce their result in a substituted variable allow to override the test by setting the variable on the @command{configure} command line (@pxref{Compilers and Options}, @pxref{Defining Variables}, @pxref{Particular Systems}). @item Many tests store their result in a cache variable (@pxref{Caching Results}). This lets you override them either on the @command{configure} command line as above, or through a primed cache or site file (@pxref{Cache Files}, @pxref{Site Defaults}). The name of a cache variable is documented with a test macro or may be inferred from @ref{Cache Variable Names}; the precise semantics of undocumented variables are often internal details, subject to change. @end itemize @item Alternatively, @command{configure} may produce invalid results because of uncaught programming errors, in your package or in an upstream library package. For example, when @code{AC_CHECK_LIB} fails to find a library with a specified function, always check @file{config.log}. This will reveal the exact error that produced the failing result: the library linked by @code{AC_CHECK_LIB} probably has a fatal bug. @end itemize Conversely, as macro author, you can make it easier for users of your macro: @itemize @item by minimizing dependencies between tests and between test results as far as possible, @item by using @command{make} variables to factorize and allow override of settings at @command{make} run time, @item by honoring the GNU Coding Standards and not overriding flags reserved for the user except temporarily during @command{configure} tests, @item by not requiring users of your macro to use the cache variables. Instead, expose the result of the test via @var{run-if-true} and @var{run-if-false} parameters. If the result is not a boolean, then provide it through documented shell variables. @end itemize @c ===================================================== History of Autoconf. @node History @chapter History of Autoconf @cindex History of autoconf @emph{This chapter was written by the original author, David MacKenzie.} You may be wondering, Why was Autoconf originally written? How did it get into its present form? (Why does it look like gorilla spit?) If you're not wondering, then this chapter contains no information useful to you, and you might as well skip it. If you @emph{are} wondering, then let there be light@enddots{} @menu * Genesis:: Prehistory and naming of @command{configure} * Exodus:: The plagues of M4 and Perl * Leviticus:: The priestly code of portability arrives * Numbers:: Growth and contributors * Deuteronomy:: Approaching the promises of easy configuration @end menu @node Genesis @section Genesis In June 1991 I was maintaining many of the GNU utilities for the Free Software Foundation. As they were ported to more platforms and more programs were added, the number of @option{-D} options that users had to select in the makefile (around 20) became burdensome. Especially for me---I had to test each new release on a bunch of different systems. So I wrote a little shell script to guess some of the correct settings for the fileutils package, and released it as part of fileutils 2.0. That @command{configure} script worked well enough that the next month I adapted it (by hand) to create similar @command{configure} scripts for several other GNU utilities packages. Brian Berliner also adapted one of my scripts for his CVS revision control system. Later that summer, I learned that Richard Stallman and Richard Pixley were developing similar scripts to use in the GNU compiler tools; so I adapted my @command{configure} scripts to support their evolving interface: using the file name @file{Makefile.in} as the templates; adding @samp{+srcdir}, the first option (of many); and creating @file{config.status} files. @node Exodus @section Exodus As I got feedback from users, I incorporated many improvements, using Emacs to search and replace, cut and paste, similar changes in each of the scripts. As I adapted more GNU utilities packages to use @command{configure} scripts, updating them all by hand became impractical. Rich Murphey, the maintainer of the GNU graphics utilities, sent me mail saying that the @command{configure} scripts were great, and asking if I had a tool for generating them that I could send him. No, I thought, but I should! So I started to work out how to generate them. And the journey from the slavery of hand-written @command{configure} scripts to the abundance and ease of Autoconf began. Cygnus @command{configure}, which was being developed at around that time, is table driven; it is meant to deal mainly with a discrete number of system types with a small number of mainly unguessable features (such as details of the object file format). The automatic configuration system that Brian Fox had developed for Bash takes a similar approach. For general use, it seems to me a hopeless cause to try to maintain an up-to-date database of which features each variant of each operating system has. It's easier and more reliable to check for most features on the fly---especially on hybrid systems that people have hacked on locally or that have patches from vendors installed. I considered using an architecture similar to that of Cygnus @command{configure}, where there is a single @command{configure} script that reads pieces of @file{configure.in} when run. But I didn't want to have to distribute all of the feature tests with every package, so I settled on having a different @command{configure} made from each @file{configure.in} by a preprocessor. That approach also offered more control and flexibility. I looked briefly into using the Metaconfig package, by Larry Wall, Harlan Stenn, and Raphael Manfredi, but I decided not to for several reasons. The @command{Configure} scripts it produces are interactive, which I find quite inconvenient; I didn't like the ways it checked for some features (such as library functions); I didn't know that it was still being maintained, and the @command{Configure} scripts I had seen didn't work on many modern systems (such as System V R4 and NeXT); it wasn't flexible in what it could do in response to a feature's presence or absence; I found it confusing to learn; and it was too big and complex for my needs (I didn't realize then how much Autoconf would eventually have to grow). I considered using Perl to generate my style of @command{configure} scripts, but decided that M4 was better suited to the job of simple textual substitutions: it gets in the way less, because output is implicit. Plus, everyone already has it. (Initially I didn't rely on the GNU extensions to M4.) Also, some of my friends at the University of Maryland had recently been putting M4 front ends on several programs, including @code{tvtwm}, and I was interested in trying out a new language. @node Leviticus @section Leviticus Since my @command{configure} scripts determine the system's capabilities automatically, with no interactive user intervention, I decided to call the program that generates them Autoconfig. But with a version number tacked on, that name would be too long for old Unix file systems, so I shortened it to Autoconf. In the fall of 1991 I called together a group of fellow questers after the Holy Grail of portability (er, that is, alpha testers) to give me feedback as I encapsulated pieces of my handwritten scripts in M4 macros and continued to add features and improve the techniques used in the checks. Prominent among the testers were Fran@,{c}ois Pinard, who came up with the idea of making an Autoconf shell script to run M4 and check for unresolved macro calls; Richard Pixley, who suggested running the compiler instead of searching the file system to find include files and symbols, for more accurate results; Karl Berry, who got Autoconf to configure @TeX{} and added the macro index to the documentation; and Ian Lance Taylor, who added support for creating a C header file as an alternative to putting @option{-D} options in a makefile, so he could use Autoconf for his UUCP package. The alpha testers cheerfully adjusted their files again and again as the names and calling conventions of the Autoconf macros changed from release to release. They all contributed many specific checks, great ideas, and bug fixes. @node Numbers @section Numbers In July 1992, after months of alpha testing, I released Autoconf 1.0, and converted many GNU packages to use it. I was surprised by how positive the reaction to it was. More people started using it than I could keep track of, including people working on software that wasn't part of the GNU Project (such as TCL, FSP, and Kerberos V5). Autoconf continued to improve rapidly, as many people using the @command{configure} scripts reported problems they encountered. Autoconf turned out to be a good torture test for M4 implementations. Unix M4 started to dump core because of the length of the macros that Autoconf defined, and several bugs showed up in GNU M4 as well. Eventually, we realized that we needed to use some features that only GNU M4 has. 4.3BSD M4, in particular, has an impoverished set of builtin macros; the System V version is better, but still doesn't provide everything we need. More development occurred as people put Autoconf under more stresses (and to uses I hadn't anticipated). Karl Berry added checks for X11. david zuhn contributed C++ support. Fran@,{c}ois Pinard made it diagnose invalid arguments. Jim Blandy bravely coerced it into configuring GNU Emacs, laying the groundwork for several later improvements. Roland McGrath got it to configure the GNU C Library, wrote the @command{autoheader} script to automate the creation of C header file templates, and added a @option{--verbose} option to @command{configure}. Noah Friedman added the @option{--autoconf-dir} option and @code{AC_MACRODIR} environment variable. (He also coined the term @dfn{autoconfiscate} to mean ``adapt a software package to use Autoconf''.) Roland and Noah improved the quoting protection in @code{AC_DEFINE} and fixed many bugs, especially when I got sick of dealing with portability problems from February through June, 1993. @node Deuteronomy @section Deuteronomy A long wish list for major features had accumulated, and the effect of several years of patching by various people had left some residual cruft. In April 1994, while working for Cygnus Support, I began a major revision of Autoconf. I added most of the features of the Cygnus @command{configure} that Autoconf had lacked, largely by adapting the relevant parts of Cygnus @command{configure} with the help of david zuhn and Ken Raeburn. These features include support for using @file{config.sub}, @file{config.guess}, @option{--host}, and @option{--target}; making links to files; and running @command{configure} scripts in subdirectories. Adding these features enabled Ken to convert GNU @code{as}, and Rob Savoye to convert DejaGNU, to using Autoconf. I added more features in response to other peoples' requests. Many people had asked for @command{configure} scripts to share the results of the checks between runs, because (particularly when configuring a large source tree, like Cygnus does) they were frustratingly slow. Mike Haertel suggested adding site-specific initialization scripts. People distributing software that had to unpack on MS-DOS asked for a way to override the @file{.in} extension on the file names, which produced file names like @file{config.h.in} containing two dots. Jim Avera did an extensive examination of the problems with quoting in @code{AC_DEFINE} and @code{AC_SUBST}; his insights led to significant improvements. Richard Stallman asked that compiler output be sent to @file{config.log} instead of @file{/dev/null}, to help people debug the Emacs @command{configure} script. I made some other changes because of my dissatisfaction with the quality of the program. I made the messages showing results of the checks less ambiguous, always printing a result. I regularized the names of the macros and cleaned up coding style inconsistencies. I added some auxiliary utilities that I had developed to help convert source code packages to use Autoconf. With the help of Fran@,{c}ois Pinard, I made the macros not interrupt each others' messages. (That feature revealed some performance bottlenecks in GNU M4, which he hastily corrected!) I reorganized the documentation around problems people want to solve. And I began a test suite, because experience had shown that Autoconf has a pronounced tendency to regress when we change it. Again, several alpha testers gave invaluable feedback, especially Fran@,{c}ois Pinard, Jim Meyering, Karl Berry, Rob Savoye, Ken Raeburn, and Mark Eichin. Finally, version 2.0 was ready. And there was much rejoicing. (And I have free time again. I think. Yeah, right.) @c ========================================================== Appendices @node GNU Free Documentation License @appendix GNU Free Documentation License @include fdl.texi @node Indices @appendix Indices @menu * Environment Variable Index:: Index of environment variables used * Output Variable Index:: Index of variables set in output files * Preprocessor Symbol Index:: Index of C preprocessor symbols defined * Cache Variable Index:: Index of documented cache variables * Autoconf Macro Index:: Index of Autoconf macros * M4 Macro Index:: Index of M4, M4sugar, and M4sh macros * Autotest Macro Index:: Index of Autotest macros * Program & Function Index:: Index of those with portability problems * Concept Index:: General index @end menu @node Environment Variable Index @appendixsec Environment Variable Index This is an alphabetical list of the environment variables that might influence Autoconf checks. @printindex ev @node Output Variable Index @appendixsec Output Variable Index This is an alphabetical list of the variables that Autoconf can substitute into files that it creates, typically one or more makefiles. @xref{Setting Output Variables}, for more information on how this is done. @printindex ov @node Preprocessor Symbol Index @appendixsec Preprocessor Symbol Index This is an alphabetical list of the C preprocessor symbols that the Autoconf macros define. To work with Autoconf, C source code needs to use these names in @code{#if} or @code{#ifdef} directives. @printindex cv @node Cache Variable Index @appendixsec Cache Variable Index This is an alphabetical list of documented cache variables used by macros defined in Autoconf. Autoconf macros may use additional cache variables internally. @ifset shortindexflag To make the list easier to use, the variables are listed without their preceding @samp{ac_cv_}. @end ifset @printindex CA @node Autoconf Macro Index @appendixsec Autoconf Macro Index This is an alphabetical list of the Autoconf macros. @ifset shortindexflag To make the list easier to use, the macros are listed without their preceding @samp{AC_}. @end ifset @printindex AC @node M4 Macro Index @appendixsec M4 Macro Index This is an alphabetical list of the M4, M4sugar, and M4sh macros. @ifset shortindexflag To make the list easier to use, the macros are listed without their preceding @samp{m4_} or @samp{AS_}. The prefix is @samp{m4_} for all-lowercase macro names and @samp{AS_} for all-uppercase macro names. @end ifset @printindex MS @node Autotest Macro Index @appendixsec Autotest Macro Index This is an alphabetical list of the Autotest macros. @ifset shortindexflag To make the list easier to use, the macros are listed without their preceding @samp{AT_}. @end ifset @printindex AT @node Program & Function Index @appendixsec Program and Function Index This is an alphabetical list of the programs and functions whose portability is discussed in this document. @printindex pr @node Concept Index @appendixsec Concept Index This is an alphabetical list of the files, tools, and concepts introduced in this document. @printindex cp @bye @c LocalWords: texinfo setfilename autoconf texi settitle setchapternewpage @c LocalWords: setcontentsaftertitlepage finalout ARG ovar varname dvar acx @c LocalWords: makeinfo dvi defcodeindex ev ov CPP cv Autotest mv defindex fn @c LocalWords: shortindexflag iftex ifset acindex ACindex ifclear ahindex fu @c LocalWords: asindex MSindex atindex ATindex auindex hdrindex prindex FIXME @c LocalWords: msindex alloca fnindex Aaarg indices FSF's dircategory ifnames @c LocalWords: direntry autoscan autoreconf autoheader autoupdate config FDs @c LocalWords: testsuite titlepage Elliston Demaille vskip filll ifnottex hmm @c LocalWords: insertcopying Autoconf's detailmenu Automake Libtool Posix ois @c LocalWords: Systemology Checkpointing Changequote INTERCAL changequote dfn @c LocalWords: Quadrigraphs builtins Shellology acconfig Bugward LIBOBJ Imake @c LocalWords: LIBOBJS IFELSE cindex flushright Pinard Metaconfig uref Simons @c LocalWords: distclean uninstall noindent versioning Tromey dir vr @c LocalWords: SAMS samp aclocal acsite underquoted emph itemx prepend SUBST @c LocalWords: evindex automake Gettext autopoint gettext symlink libtoolize @c LocalWords: defmac INIT tarname ovindex cvindex BUGREPORT PREREQ asis PROG @c LocalWords: SRCDIR srcdir globbing afterwards cmds foos fooo foooo init cd @c LocalWords: builddir timestamp src Imakefile chmod defvar CFLAGS CPPFLAGS @c LocalWords: CXXFLAGS DEFS DHAVE defvarx FCFLAGS FFLAGS LDFLAGS bindir GCC @c LocalWords: datadir datarootdir docdir dvidir htmldir libdir ifnothtml kbd @c LocalWords: includedir infodir libexecdir localedir localstatedir mandir @c LocalWords: oldincludedir pdfdir PDF psdir PostScript sbindir sysconfdir @c LocalWords: sharedstatedir DDATADIR sed tmp pkgdatadir VPATH conf unistd @c LocalWords: undef endif builtin FUNCS ifndef STACKSEG getb GETB YMP fubar @c LocalWords: PRE dest SUBDIRS subdirs fi struct STDC stdlib stddef INTTYPES @c LocalWords: inttypes STDINT stdint AWK AIX Solaris NeXT env EGREP FGREP yy @c LocalWords: LEXLIB YYTEXT lfl nonportable Automake's LN RANLIB byacc INETD @c LocalWords: inetd prog PROGS progs ranlib lmp lXt lX nsl gethostbyname UX @c LocalWords: NextStep isinf isnan glibc IRIX sunmath lm lsunmath pre sizeof @c LocalWords: ld inline malloc putenv setenv FreeBSD realloc SunOS MinGW @c LocalWords: snprintf vsnprintf sprintf vsprintf sscanf gcc strerror ifdef @c LocalWords: strnlen sysconf PAGESIZE unsetenv va fallback memcpy dst FUNC @c LocalWords: PowerPC GNUC libPW pragma Olibcalls CHOWN chown CLOSEDIR VFORK @c LocalWords: closedir FNMATCH fnmatch vfork FSEEKO LARGEFILE fseeko SVR sc @c LocalWords: largefile GETGROUPS getgroups GETLOADAVG DGUX UMAX NLIST KMEM @c LocalWords: SETGID getloadavg nlist GETMNTENT irix acxindex autom @c LocalWords: getmntent UnixWare GETPGRP getpgid getpgrp Posix's pid LSTAT @c LocalWords: lstat rpl MEMCMP memcmp OpenStep MBRTOWC mbrtowc MKTIME mktime @c LocalWords: localtime MMAP mmap OBSTACK obstack obstacks ARGTYPES timeval @c LocalWords: SETPGRP setpgrp defmacx Hurd SETVBUF setvbuf STRCOLL strcoll @c LocalWords: STRTOD strtod DECL STRFTIME strftime SCO UTIME utime VPRINTF @c LocalWords: DOPRNT vprintf doprnt sp unfixable LIBSOURCE LIBSOURCES Eggert @c LocalWords: linux netinet ia Tru XFree DIRENT NDIR dirent ndir multitable @c LocalWords: NAMLEN strlen namlen MKDEV SYSMACROS makedev RESOLV resolv DNS @c LocalWords: inet structs NAMESER arpa NETDB netdb UTekV UTS GCC's kB @c LocalWords: STDBOOL BOOL stdbool cplusplus bool Bool stdarg tm te @c LocalWords: ctype strchr strrchr rindex bcopy memmove memchr WEXITSTATUS @c LocalWords: WIFEXITED TIOCGWINSZ GWINSZ termios preprocess preprocessable @c LocalWords: DECLS strdup calloc BLKSIZE blksize RDEV rdev TZNAME tzname pw @c LocalWords: passwd gecos pwd MBSTATE mbstate wchar RETSIGTYPE hup UID uid @c LocalWords: gid ptrdiff uintmax EXEEXT OBJEXT Ae conftest AXP str @c LocalWords: ALIGNOF WERROR Werror cpp HP's WorkShop egcs un fied stdc CXX @c LocalWords: varargs BIGENDIAN Endianness SPARC endianness grep'ed CONST FC @c LocalWords: const STRINGIZE stringizing PARAMS unprotoize protos KCC cxx @c LocalWords: xlC aCC CXXCPP FREEFORM xlf FLIBS FCLIBS ish SRCEXT XTRA LFS @c LocalWords: ISC lcposix MINIX Minix conditionalized inlines hw dD confdefs @c LocalWords: fputs stdout PREPROC ar UFS HFS QNX realtime fstype STATVFS se @c LocalWords: statvfs STATFS statfs func machfile hdr lelf raboof DEFUN GTK @c LocalWords: GTKMM Grmph ified ine defn baz EOF qar Ahhh changecom algol io @c LocalWords: changeword quadrigraphs quadrigraph dnl SGI atoi overquoting @c LocalWords: Aas Wcross sep args namespace undefine bpatsubst popdef dquote @c LocalWords: bregexp Overquote overquotation meisch maisch meische maische @c LocalWords: miscian DIRNAME dirname MKDIR CATFILE XMKMF TRAVOLTA celsius @c LocalWords: EMX emxos Emacsen Korn DYNIX subshell posix Ksh ksh Pdksh Zsh @c LocalWords: pdksh zsh Allbery Lipe Kubota UWS zorglub stderr eval esac lfn @c LocalWords: drivespec Posixy DJGPP doschk prettybird LPT pfew Zsh's yu yaa @c LocalWords: yM uM aM firebird IP subdir misparses ok Unpatched abc bc zA @c LocalWords: CDPATH DUALCASE LINENO prepass Subshells lineno NULLCMD cmp wc @c LocalWords: MAILPATH scanset arg NetBSD Almquist printf expr cp pR @c LocalWords: Oliva awk Aaaaarg cmd regex xfoo GNV OpenVMS VM url fc @c LocalWords: sparc Proulx nbar nfoo maxdepth acdilrtu TWG mc ing FP @c LocalWords: mkdir exe uname OpenBSD Fileutils mktemp umask TMPDIR guid os @c LocalWords: fooXXXXXX Unicos utimes hpux hppa unescaped SUBST'ed @c LocalWords: pmake DOS's gmake ifoo DESTDIR autoconfiscated pc coff mips gg @c LocalWords: dec ultrix cpu wildcards rpcc rdtsc powerpc readline @c LocalWords: withval vxworks gless localcache usr LOFF loff CYGWIN Cygwin @c LocalWords: cygwin SIGLIST siglist SYSNDIR SYSDIR ptx lseq rusage elif MSC @c LocalWords: lfoo POUNDBANG lsun NIS getpwnam SYSCALLS RSH INTL lintl aix @c LocalWords: intl lx ldir syslog bsd EPI toolchain netbsd objext de KNR nn @c LocalWords: fication LTLIBOBJS Wdiff TESTDIR atconfig atlocal akim XFAIL @c LocalWords: ChangeLog prepended errexit smallexample TESTSUITEFLAGS GPL er @c LocalWords: installcheck autotest indir Pixley Bothner Eichin Kerberos adl @c LocalWords: DISTCLEANFILES preprocessor's fileutils Stallman Murphey Stenn @c LocalWords: Manfredi Autoconfig TCL FSP david zuhn Blandy MACRODIR Raeburn @c LocalWords: autoconfiscate Savoye Haertel Avera Meyering fdl appendixsec @c LocalWords: printindex american LIBOBJDIR LibdirTest ERLCFLAGS OBJCFLAGS @c LocalWords: VER Gnulib online xyes strcpy TYPEOF typeof OBJC objcc objc ln @c LocalWords: GOBJC OTP ERLC erl valloc decr dumpdef errprint incr @c LocalWords: esyscmd len maketemp pushdef substr syscmd sysval translit txt @c LocalWords: sinclude foreach myvar tolower toupper uniq BASENAME STDIN @c LocalWords: Dynix basename aname cname macroexpands xno xcheck iso @c LocalWords: LIBREADLINE lreadline lncurses libreadline vrindex SYS @c LocalWords: syncodeindex define'd caindex CAindex MacKenzie DIRS @c LocalWords: Runtime runtime Submakes submakes MAKEFLAGS whitespace @c LocalWords: Timestamps Unportability Canonicalizing stdalign dirN @c LocalWords: acinclude AMFLAGS LIBS OBJCXXFLAGS GOFLAGS runstatedir @c LocalWords: metacharacter EXPENSIVEP errno setjmp wctype sys mawk @c LocalWords: nawk ggrep egrep gegrep fgrep gfgrep LEX lex yytext nm @c LocalWords: yywrap xflex lexyy YFLAGS yacc divnum libs fuindex ffs @c LocalWords: environ sigaction extern ftello nonnull STRTOLD LLONG @c LocalWords: strtold vfprintf ULLONG strcasecmp strncasecmp MSVC th @c LocalWords: NDEBUG Xenix INO libc ISDIR ISREG Tektronix Amdahl ino @c LocalWords: typedef pxref fileblocks submembers INTMAX intmax UINT @c LocalWords: INTPTR intptr SSIZE ssize uint UINTPTR uintptr OPENMP @c LocalWords: openmp OpenMP omp Alignas Alignof Noreturn UTF vals gl @c LocalWords: offsetof VARARRAYS VLA CCC stdcxx nullptr @c LocalWords: constexpr decltype unicode fstreams iostreams iomanip @c LocalWords: stringstreams GXX OBJCPP OBJCXX objcxx GOBJCXX erlc tx @c LocalWords: OBJCXXCPP FIXEDFORM GFC argc argv shellvar fpp MODEXT @c LocalWords: freeform fixedform MODINC MODOUT gccgo GOC xmkmf fseek @c LocalWords: interpval ftell Interix macOS PTHREAD NonStop XOPEN xc @c LocalWords: IEC ATTRIBS BFP DFP O'Donell Sebor ERTS Erlang's erts @c LocalWords: erlang Wundef scalable USG NOTMAKE DOUCH @c LocalWords: IVE changesyntax ifnotinfo oline num cfg debugfile cdr @c LocalWords: debugmode traceoff traceon patsubst dumpdefs ifelse aa @c LocalWords: mkstemp undivert lifo errprintn BINSH sanitization bcd @c LocalWords: cleardivert bmatch bpatsubsts subst cond nblank ifval @c LocalWords: ifblank ifnblank ifvaln fputc fgetc argn mapall dvarv @c LocalWords: shiftn abcd elt noquote mkargs joinall SHA prereq dup @c LocalWords: listc setb seta ARITH HNUM xcurly xoccupied @c LocalWords: TESTA TESTB TESTC hoc xpg xxyzzyz dtksh nosuch fifos @c LocalWords: fifo Stardent sig WIF WIFSIGNALED SIGQUIT tty perl ret @c LocalWords: SIGINT NUL SFN PRN aeiou MSYS SIGTERM xhi arith UWIN @c LocalWords: CLICOLOR FPATH POSIXLY Shellshock CVE OSF doit ec ci @c LocalWords: notreached cim nc ACL faccessat Alexandre getline sqrt @c LocalWords: CONVFMT FS OFMT CDS chgrp futimens utimensat oo esc od @c LocalWords: ownerships mape readdir mkfifo mknod testsuites XSI rf @c LocalWords: bcdox hexdump filelist rmdir flushleft busybox nl HAZy @c LocalWords: ABCDEFGHIJKLMNOPQRSTUVWXYZ Fantazy FAntAZy adc unix xb @c LocalWords: SUBMAKEFLAGS ehBc ehB hBc hvB dmake hostname nlinit xf @c LocalWords: DCOMMENT bart pathnames ifhtml randx @c LocalWords: sumc hic ic fwrapv ftrapv SIGFPE memset fmudflap ctime @c LocalWords: asctime lvalues lvalue Multithreaded decstation gdb na @c LocalWords: enableval lesskey FHS superset waitpid libfoo cposix @c LocalWords: mem RESTARTABLE bzero DejaGNU EUNIT subfile optarg ive @c LocalWords: nolog expout experr erlflags EUnit testme eunit myprog @c LocalWords: configmake vx bashdb tvtwm questers UUCP McGrath @c LocalWords: ispell @c Local Variables: @c fill-column: 72 @c ispell-local-dictionary: "american" @c indent-tabs-mode: nil @c whitespace-check-buffer-indent: nil @c End: