From ffd4ecc946c6b150f5ee5684fa04bd4f9e8b7af9 Mon Sep 17 00:00:00 2001 From: Stefano Lattarini Date: Mon, 20 May 2013 11:23:01 +0200 Subject: tests: better idiom to override make macro defs on the cmdline We now do so with a new wrapper shell function 'run_make()', which relies on the use of AM_MAKEFLAGS, avoiding the use of the '-e' make option. The use of that option (that causes the environment variables to take precedence over the macro definitions in the Makefile) has proved to be quite brittle in the past, causing annoying and sometimes problematic spurious failures. This has worsened in some still unpublished work going on in development branches. It's time to solve the issue once and for all. Note that we do not convert all uses of $MAKE in the testsuite right away; we might do so in follow-up changes, with leisure, to avoid a "patch bomb" effect (this commit is already too much of a bomb itself). What we do in this commit is to get rid of all "$MAKE -e" invocations. We admit that the implementation and feature-set of 'run_make()' are far from perfect, but good enough for our current purposes. We'll improve 'run_make()' if and when the need arises. * syntax-checks.mk (sc_tests_no_make_e): New syntax check, guard against the use of "$MAKE -e". (syntax_check_rules): Add it. (sc_tests_overriding_macros_on_cmdline): Adjust. (lint): New, alias for 'maintainer-check', for lazy typists. Idea backported from the 'maint' branch (Automake 1.13a). * t/ax/am-test-lib.sh (run_make): New function. Run $MAKE with the given command-line arguments, handling command-line override of variable definitions in a smart way (using AM_MAKEFLAGS if a non-GNU make implementation is detected to be in use). (useless_vpath_rebuild): Adjust to use 'run_make', to avoid a spurious maintainer check failure. (yl_distcheck): Use 'run_make' rather than bare '$MAKE'. (single_quote, append_single_quoted, is_valid_varname): New auxiliary function, used, directly or indirectly, by it. * Many tests: Adjust to avoid the use of "$MAKE -e", and prefer the use of 'run_make' in few other contexts as well, where it makes sense. Other minor fixlets while at it. Signed-off-by: Stefano Lattarini --- t/ax/am-test-lib.sh | 125 ++++++++++++++++++++++++++++- t/ax/tap-summary-aux.sh | 6 +- t/ax/testsuite-summary-checks.sh | 10 +-- t/check-concurrency-bug9245.sh | 9 +-- t/check10.sh | 29 +++---- t/check11.sh | 4 +- t/check5.sh | 2 +- t/check7.sh | 2 +- t/color-tests.sh | 7 +- t/distcheck-configure-flags.sh | 3 +- t/distcheck-override-infodir.sh | 2 +- t/distdir.sh | 2 +- t/exeext.sh | 4 +- t/instdir-java.sh | 12 +-- t/instdir-lisp.sh | 11 ++- t/instdir-ltlib.sh | 18 ++--- t/instdir-no-empty.sh | 6 +- t/instdir-prog.sh | 17 ++-- t/instdir-python.sh | 11 ++- t/instdir-texi.sh | 13 ++- t/instdir.sh | 11 ++- t/instdir2.sh | 11 ++- t/insthook.sh | 2 +- t/instmany-mans.sh | 43 +++++++--- t/instmany-python.sh | 43 +++++++--- t/instmany.sh | 43 +++++++--- t/instspc.tap | 2 +- t/javaflags.sh | 2 +- t/lflags.sh | 2 +- t/lflags2.sh | 2 +- t/libtool9.sh | 11 ++- t/link_cond.sh | 8 +- t/lisp-flags.sh | 6 +- t/man3.sh | 2 +- t/mmodely.sh | 3 +- t/parallel-tests-basics.sh | 12 +-- t/parallel-tests-cmdline-override.sh | 2 +- t/parallel-tests-empty-testlogs.sh | 4 +- t/parallel-tests-exit-statuses.sh | 51 +++++------- t/parallel-tests-extra-programs.sh | 7 +- t/parallel-tests-fork-bomb.sh | 2 +- t/parallel-tests-harderror.sh | 5 +- t/parallel-tests-log-compiler-1.sh | 2 +- t/parallel-tests-log-override-1.sh | 10 +-- t/parallel-tests-log-override-2.sh | 4 +- t/parallel-tests-log-override-recheck.sh | 4 +- t/parallel-tests-no-color-in-log.sh | 2 +- t/parallel-tests-recheck-pr11791.sh | 6 +- t/remake-subdir-long-time.sh | 4 +- t/remake-timing-bug-pr8365.sh | 5 +- t/subst-no-trailing-empty-line.sh | 4 +- t/suffix-custom-subobj.sh | 2 +- t/suffix11.tap | 2 +- t/suffix6c.sh | 4 +- t/suffix8.tap | 2 +- t/tap-autonumber.sh | 2 +- t/tap-bailout-leading-space.sh | 2 +- t/tap-bailout-suppress-later-errors.sh | 2 +- t/tap-bailout.sh | 2 +- t/tap-basic.sh | 4 +- t/tap-color.sh | 8 +- t/tap-diagnostic.sh | 2 +- t/tap-doc2.sh | 4 +- t/tap-global-log.sh | 3 +- t/tap-global-result.sh | 4 +- t/tap-log.sh | 4 +- t/tap-merge-stdout-stderr.sh | 2 +- t/tap-msg0-bailout.sh | 2 +- t/tap-msg0-planskip.sh | 2 +- t/tap-out-of-order.sh | 2 +- t/tap-passthrough-exit.sh | 2 +- t/tap-passthrough.sh | 6 +- t/tap-plan-corner.sh | 16 ++-- t/tap-plan-leading-zero.sh | 4 +- t/tap-plan-malformed.sh | 2 +- t/tap-plan-middle.sh | 4 +- t/tap-plan-whitespace.sh | 2 +- t/tap-plan.sh | 4 +- t/tap-planskip-and-logging.sh | 2 +- t/tap-planskip-case-insensitive.sh | 2 +- t/tap-planskip-late.sh | 2 +- t/tap-planskip-unplanned-corner.sh | 2 +- t/tap-planskip-whitespace.sh | 2 +- t/tap-planskip.sh | 4 +- t/tap-recheck-logs.sh | 12 +-- t/tap-test-number-0.sh | 2 +- t/tap-unplanned.sh | 2 +- t/test-driver-custom-multitest-recheck2.sh | 18 ++--- t/test-driver-custom-multitest.sh | 2 +- t/test-log.sh | 4 +- t/test-missing.sh | 6 +- t/test-trs-basic.sh | 14 ++-- t/test-trs-recover.sh | 6 +- t/test-trs-recover2.sh | 2 +- t/testsuite-summary-reference-log.sh | 4 +- t/txinfo-many-output-formats-vpath.sh | 2 +- t/txinfo-many-output-formats.sh | 2 +- t/yflags-cmdline-override.sh | 9 +-- t/yflags.sh | 6 +- t/yflags2.sh | 6 +- 100 files changed, 484 insertions(+), 330 deletions(-) (limited to 't') diff --git a/t/ax/am-test-lib.sh b/t/ax/am-test-lib.sh index b32320094..4f5c89519 100644 --- a/t/ax/am-test-lib.sh +++ b/t/ax/am-test-lib.sh @@ -121,6 +121,127 @@ is_blocked_signal () fi } +# single_quote STRING +# ------------------- +# Single-quote STRING for the shell, also dealing with embedded single +# quotes. Place the result in the '$am_result', that is thus to be +# considered public. +single_quote () +{ + am_result=$1 + case $am_result in + *\'*) am_result=$(printf '%s\n' "$*" | sed -e "s/'/'\\\\''/g");; + esac + am_result="'$am_result'" +} + +# append_single_quoted VARIABLE STRING +# ------------------------------------ +append_single_quoted () +{ + am__var=$1; shift + single_quote "$1" # Sets 'am_result'. + eval "${am__var}=\${$am__var:+\"\${$am__var} \"}\$am_result" + unset am__var am_result +} + +# is_valid_varname STRING +# ----------------------- +# Tell whether STRING is a valid name for a shell variable. Return 0 +# if yes, return 1 if not. +is_valid_varname () +{ + # FIXME: is the below truly portable even for LC_COLLATE != "C" ? + case $1 in + [0-9]*) return 1;; + *[!a-zA-Z0-9_]*) return 1;; + esac + return 0 +} + +# run_make [-e STATUS] [--] [VAR=VAL ...] [MAKE-ARGS...] +# ------------------------------------------------------ +# Run $MAKE with the given command-line, and fail if it doesn't exit with +# STATUS (default: 0). If STATUS is "FAIL", then any exit status > 0 is +# acceptable. If STATUS is "IGNORE", any exit value is acceptable. +# This function also handle command-line override of variable definition +# in a smart way, using AM_MAKEFLAGS if a non-GNU make implementation +# is in use. +run_make () +{ + # Follow-up code might want to analyse these, so don't make them as + # private, nor unset them later. + am_make_rc_exp=0 + am_make_rc_got=0 + # Parse options for this function. + while test $# -gt 0; do + case $1 in + -e) am_make_rc_exp=$2; shift;; + --) shift; break;; + *) break;; + esac + shift + done + am__make_flags= + if using_gmake; then + # We can trust GNU make to correctly pass macro definitions given + # on the command line down to sub-make invocations, and this allow + # us to have a vary simple implementation: delegate all the work + # to GNU make. + : + else + # We have to explicitly parse arguments passed to make. Not 100% + # safe w.r.t. options like '-I' that can have an argument, but + # should be good enough for our usages so far. + for am__x + do + case $am__x in + *=*) + am__maybe_var=${am__x%%=*} + am__maybe_val=${am__x#*=} + am__maybe_def="${am__maybe_var}=${am__maybe_val}" + # Some variables should be portably overridable from the command + # line, even when using non-GNU make. + case $am__maybe_var in + V|\ + DESTDIR|\ + SHELL|\ + VERBOSE|\ + DISABLE_HARD_ERRORS|\ + DISTCHECK_CONFIGURE_FLAGS) + ;; + *) + if is_valid_varname "$am__maybe_var"; then + append_single_quoted am__make_flags "$am__maybe_def" + fi + esac + unset am__maybe_var am__maybe_val am__maybe_def + ;; + esac + done + unset am__x + fi + if test x"$am__make_flags" != x; then + $MAKE AM_MAKEFLAGS="$am__make_flags" ${1+"$@"} || am_make_rc_got=$? + else + $MAKE ${1+"$@"} || am_make_rc_got=$? + fi + unset am__make_flags + case $am_make_rc_exp in + IGNORE) + : Ignore exit status + ;; + FAIL) + test $am_make_rc_got -gt 0 || return 1 + ;; + *) + test $am_make_rc_exp -ge 0 && test $am_make_rc_exp -le 255 \ + || fatal_ "invalid expected exit status: '$am_make_rc_exp'" + test $am_make_rc_exp -eq $am_make_rc_got || return 1 + ;; + esac +} + # AUTOMAKE_run [-e STATUS] [-d DESCRIPTION] [--] [AUTOMAKE-ARGS...] # ----------------------------------------------------------------- # Run automake with AUTOMAKE-ARGS, and fail if it doesn't exit with @@ -311,7 +432,7 @@ useless_vpath_rebuild () .a.b: ; cp $< $@ baz: bar ; cp ../baz bar END - if $MAKE all && test ! -e foo.b && test ! -e bar; then + if run_make all && test ! -e foo.b && test ! -e bar; then am__useless_vpath_rebuild=no else am__useless_vpath_rebuild=yes @@ -328,7 +449,7 @@ END } am__useless_vpath_rebuild="" -yl_distcheck () { useless_vpath_rebuild || $MAKE distcheck ${1+"$@"}; } +yl_distcheck () { useless_vpath_rebuild || run_make distcheck ${1+"$@"}; } # count_test_results total=N pass=N fail=N xpass=N xfail=N skip=N error=N # ----------------------------------------------------------------------- diff --git a/t/ax/tap-summary-aux.sh b/t/ax/tap-summary-aux.sh index 1872caa47..227007930 100644 --- a/t/ax/tap-summary-aux.sh +++ b/t/ax/tap-summary-aux.sh @@ -57,11 +57,11 @@ do_check () if test $use_colors = yes; then # Forced colorization should take place also with non-ANSI terminals; # hence the "TERM=dumb" definition. - make_cmd="env TERM=dumb AM_COLOR_TESTS=always $MAKE -e" + make_args='TERM=dumb AM_COLOR_TESTS=always' else - make_cmd=$MAKE + make_args= fi - $make_cmd check > stdout || st=$? + run_make $make_args check > stdout || st=$? cat stdout if test $expect_failure = yes; then test $st -gt 0 || exit 1 diff --git a/t/ax/testsuite-summary-checks.sh b/t/ax/testsuite-summary-checks.sh index 63f3f9158..94de72d78 100644 --- a/t/ax/testsuite-summary-checks.sh +++ b/t/ax/testsuite-summary-checks.sh @@ -69,19 +69,17 @@ do_check () cat > summary.exp expect_failure=false xfail_tests='' - tests="TESTS='$*'" + tests="$*" for t in $*; do case $t in fail*|xpass*|error*) expect_failure=:;; esac case $t in xfail*|xpass*) xfail_tests="$xfail_tests $t";; esac done - test -z "$xfail_tests" || xfail_tests="XFAIL_TESTS='$xfail_tests'" - st=0 - eval "env $tests $xfail_tests \$MAKE -e check > stdout || st=\$?" + run_make -e IGNORE check TESTS="$tests" XFAIL_TESTS="$xfail_tests" >stdout cat stdout if $expect_failure; then - test $st -gt 0 || exit 1 + test $am_make_rc_got -gt 0 || exit 1 else - test $st -eq 0 || exit 1 + test $am_make_rc_got -eq 0 || exit 1 fi $PERL "$am_testaux_srcdir"/extract-testsuite-summary.pl stdout >summary.got \ || fatal_ "cannot extract testsuite summary" diff --git a/t/check-concurrency-bug9245.sh b/t/check-concurrency-bug9245.sh index eaf66d97d..abe01d3bb 100644 --- a/t/check-concurrency-bug9245.sh +++ b/t/check-concurrency-bug9245.sh @@ -42,16 +42,15 @@ $AUTOMAKE -a ./configure -# Some make implementations don't grok the '-j' option. -$MAKE -j1 || exit 77 +$MAKE -j1 || skip_ "'$MAKE' doesn't support the -j option" for j in '' -j1 -j2; do $MAKE $j check && exit 1 - TESTS=foo.test $MAKE $j -e check && exit 1 + run_make -e FAIL -- $j TESTS=foo.test check $MAKE $j recheck && exit 1 - TEST_LOGS=foo.log $MAKE $j -e check && exit 1 + run_make -e FAIL -- $j TEST_LOGS=foo.log check rm -f test-suite.log - $MAKE $j test-suite.log && exit 1 + run_make -e FAIL $j test-suite.log test -f test-suite.log || exit 1 done diff --git a/t/check10.sh b/t/check10.sh index d66ad2c7a..3bb180b20 100644 --- a/t/check10.sh +++ b/t/check10.sh @@ -55,22 +55,19 @@ $AUTOCONF $AUTOMAKE -a ./configure -( - # Do not check for failure in this subshell - set +e - env TESTS=pass $MAKE -e check - env TESTS=fail $MAKE -e check - env TESTS=skip $MAKE -e check - env TESTS=xfail $MAKE -e check - env TESTS=xpass $MAKE -e check - env TESTS="pass pass2" $MAKE -e check - env TESTS="fail fail2" $MAKE -e check - env TESTS="skip skip2" $MAKE -e check - env TESTS="xfail xfail2" $MAKE -e check - env TESTS="xpass xpass2" $MAKE -e check - env TESTS='pass skip xfail' $MAKE -e check - $MAKE check - : +( + run_make -e IGNORE TESTS=pass check + run_make -e IGNORE TESTS=fail check + run_make -e IGNORE TESTS=skip check + run_make -e IGNORE TESTS=xfail check + run_make -e IGNORE TESTS=xpass check + run_make -e IGNORE TESTS="pass pass2" check + run_make -e IGNORE TESTS="fail fail2" check + run_make -e IGNORE TESTS="skip skip2" check + run_make -e IGNORE TESTS="xfail xfail2" check + run_make -e IGNORE TESTS="xpass xpass2" check + run_make -e IGNORE TESTS='pass skip xfail' check + run_make -e IGNORE check ) >stdout || { cat stdout; exit 1; } cat stdout diff --git a/t/check11.sh b/t/check11.sh index 61b95be03..3526d84a7 100644 --- a/t/check11.sh +++ b/t/check11.sh @@ -40,7 +40,7 @@ $AUTOMAKE -a ./configure -env TESTS=skip $MAKE -e check >stdout || { cat stdout; exit 1; } +run_make TESTS=skip check >stdout || { cat stdout; exit 1; } cat stdout if test x"$am_serial_tests" = x"yes"; then grep '1.*passed' stdout && exit 1 @@ -49,7 +49,7 @@ else count_test_results total=1 pass=0 fail=0 skip=1 xfail=0 xpass=0 error=0 fi -env TESTS="skip skip2" $MAKE -e check >stdout || { cat stdout; exit 1; } +run_make TESTS="skip skip2" check >stdout || { cat stdout; exit 1; } cat stdout if test x"$am_serial_tests" = x"yes"; then grep '2.*passed' stdout && exit 1 diff --git a/t/check5.sh b/t/check5.sh index 2b2d7434d..a70883919 100644 --- a/t/check5.sh +++ b/t/check5.sh @@ -52,7 +52,7 @@ cp one.c two.c ./configure $MAKE check test -f ok -EXEEXT=.bin $MAKE -e print-tests >stdout || { cat stdout; exit 1; } +run_make EXEEXT=.bin print-tests >stdout || { cat stdout; exit 1; } cat stdout $FGREP 'BEG: one.bin two.bin :END' stdout # No am__EXEEXT_* variable is needed. diff --git a/t/check7.sh b/t/check7.sh index 5f19af0d0..5575f953f 100644 --- a/t/check7.sh +++ b/t/check7.sh @@ -60,7 +60,7 @@ $AUTOMAKE -a ./configure $MAKE check -EXEEXT=.bin $MAKE -e print-xfail-tests >stdout || { cat stdout; exit 1; } +run_make EXEEXT=.bin print-xfail-tests >stdout || { cat stdout; exit 1; } cat stdout $FGREP 'BEG: a.bin b c.bin d.bin :END' stdout diff --git a/t/color-tests.sh b/t/color-tests.sh index ae6ef686e..9a0d4351f 100644 --- a/t/color-tests.sh +++ b/t/color-tests.sh @@ -134,12 +134,13 @@ for vpath in false :; do # Forced colorization should take place also with non-ANSI terminals; # hence the "TERM=dumb" definition. - TERM=dumb AM_COLOR_TESTS=always $MAKE -e check >stdout \ - && { cat stdout; exit 1; } + AM_COLOR_TESTS=always; export AM_COLOR_TESTS + run_make TERM=dumb check >stdout && { cat stdout; exit 1; } cat stdout test_color - TERM=ansi $MAKE -e check >stdout && { cat stdout; exit 1; } + unset AM_COLOR_TESTS + run_make TERM=ansi check >stdout && { cat stdout; exit 1; } cat stdout test_no_color diff --git a/t/distcheck-configure-flags.sh b/t/distcheck-configure-flags.sh index 3c23117c7..dece1c443 100644 --- a/t/distcheck-configure-flags.sh +++ b/t/distcheck-configure-flags.sh @@ -40,8 +40,9 @@ $AUTOCONF # It should be ok to define DISTCHECK_CONFIGURE_FLAGS either on the # make command line or in the environment. +# Not 'make -e' below, deliberately. env DISTCHECK_CONFIGURE_FLAGS='--enable-success sentence=it\ works\ :-\)' \ - $MAKE distcheck # Not 'make -e' here, deliberately. + $MAKE distcheck $MAKE distcheck \ DISTCHECK_CONFIGURE_FLAGS="--enable-success=yes sentence='it works :-)'" diff --git a/t/distcheck-override-infodir.sh b/t/distcheck-override-infodir.sh index cc2a5d6e8..6127f2bc1 100644 --- a/t/distcheck-override-infodir.sh +++ b/t/distcheck-override-infodir.sh @@ -72,7 +72,7 @@ $AUTOCONF $MAKE $MAKE distcheck -infodir="$(pwd)/_info" $MAKE -e distcheck +run_make infodir="$(pwd)/_info" distcheck test -f _info/dir || exit 99 # Sanity check. : diff --git a/t/distdir.sh b/t/distdir.sh index a050d3e2a..94de0d2af 100644 --- a/t/distdir.sh +++ b/t/distdir.sh @@ -68,7 +68,7 @@ test -d foo && exit 1 rm -rf $me-1.0 # Remove the dot from VERSION for the next grep. -VERSION=10 MKDIR_P='echo MKDIR_P' $MAKE -e distdir >stdout || : +run_make -e IGNORE VERSION=10 MKDIR_P='echo MKDIR_P' distdir >stdout cat stdout # Make sure no './' appear in the directory names. srcdir is '..', so diff --git a/t/exeext.sh b/t/exeext.sh index 35b1a2109..604e9a5fe 100644 --- a/t/exeext.sh +++ b/t/exeext.sh @@ -69,7 +69,7 @@ grep 'maude3__EXEEXT__OBJECTS' Makefile.in && exit 1 ./configure -EXEEXT=.foo $MAKE -e print > stdout +run_make EXEEXT=.foo print > stdout cat stdout grep '1BEG: maude.foo mt.foo :END1' stdout @@ -79,7 +79,7 @@ grep '4BEG: rmt.foo :END4' stdout ./configure revert=yes -EXEEXT=.foo $MAKE -e print > stdout +run_make EXEEXT=.foo print > stdout cat stdout grep '1BEG: maude.foo :END1' stdout diff --git a/t/instdir-java.sh b/t/instdir-java.sh index 97eff573c..547ec5f7c 100644 --- a/t/instdir-java.sh +++ b/t/instdir-java.sh @@ -45,16 +45,16 @@ cd build ../configure --prefix="$instdir" $MAKE -javadir= -export javadir -$MAKE -e install +nukedirs='javadir=' + +run_make $nukedirs install test ! -e "$instdir" -$MAKE -e install DESTDIR="$destdir" +run_make $nukedirs install DESTDIR="$destdir" test ! -e "$instdir" test ! -e "$destdir" -$MAKE -e uninstall > stdout || { cat stdout; exit 1; } +run_make $nukedirs uninstall > stdout || { cat stdout; exit 1; } cat stdout grep 'rm -f' stdout && exit 1 -$MAKE -e uninstall DESTDIR="$destdir" +run_make $nukedirs uninstall DESTDIR="$destdir" : diff --git a/t/instdir-lisp.sh b/t/instdir-lisp.sh index 0c31b81f5..97605571c 100644 --- a/t/instdir-lisp.sh +++ b/t/instdir-lisp.sh @@ -42,17 +42,16 @@ cd build ../configure --prefix="$instdir" $MAKE -lispdir= -export lispdir +nukedirs='lispdir=' -$MAKE -e install +run_make $nukedirs install test ! -e "$instdir" -$MAKE -e install DESTDIR="$destdir" +run_make $nukedirs install DESTDIR="$destdir" test ! -e "$instdir" test ! -e "$destdir" -$MAKE -e uninstall > stdout || { cat stdout; exit 1; } +run_make $nukedirs uninstall > stdout || { cat stdout; exit 1; } cat stdout grep 'rm -f' stdout && exit 1 -$MAKE -e uninstall DESTDIR="$destdir" +run_make $nukedirs uninstall DESTDIR="$destdir" : diff --git a/t/instdir-ltlib.sh b/t/instdir-ltlib.sh index 32d8d409a..0299d5a6a 100644 --- a/t/instdir-ltlib.sh +++ b/t/instdir-ltlib.sh @@ -69,20 +69,16 @@ cd build am_cv_python_pyexecdir="$instdir/pyexec" $MAKE -bindir= libdir= pyexecdir= -export bindir libdir pyexecdir -$MAKE -e install +nukedirs='bindir= libdir= pyexecdir=' + +run_make $nukedirs install test ! -e "$instdir" -$MAKE -e install DESTDIR="$destdir" +run_make $nukedirs install DESTDIR="$destdir" test ! -e "$instdir" test ! -e "$destdir" -$MAKE -e uninstall > stdout || { cat stdout; exit 1; } -cat stdout -# Creative quoting below to please maintainer-check. -grep 'rm'' ' stdout && exit 1 -$MAKE -e uninstall DESTDIR="$destdir" > stdout || { cat stdout; exit 1; } +run_make $nukedirs uninstall > stdout || { cat stdout; exit 1; } cat stdout -# Creative quoting below to please maintainer-check. -grep 'rm'' ' stdout && exit 1 +grep 'rm -f' stdout && exit 1 +run_make $nukedirs uninstall DESTDIR="$destdir" : diff --git a/t/instdir-no-empty.sh b/t/instdir-no-empty.sh index 66d76f2ed..03e18623d 100644 --- a/t/instdir-no-empty.sh +++ b/t/instdir-no-empty.sh @@ -99,7 +99,7 @@ cwd=$(pwd) || fatal_ "getting current working directory" doinst () { - $MAKE install install-pdf install-ps install-dvi ${1+"$@"} + run_make install install-pdf install-ps install-dvi ${1+"$@"} } : > foo.sh @@ -108,14 +108,14 @@ doinst () doinst test ! -e inst || { find inst; exit 1; } $MAKE uninstall -doinst bin_SCRIPTS=foo.sh AM_MAKEFLAGS='bin_SCRIPTS=foo.sh' +doinst bin_SCRIPTS=foo.sh test -f inst/bin/foo.sh ./configure doinst DESTDIR="$cwd/dest" test ! -e dest || { find dest; exit 1; } $MAKE uninstall -doinst DESTDIR="$cwd/dest" bin_SCRIPTS=foo.sh AM_MAKEFLAGS='bin_SCRIPTS=foo.sh' +doinst DESTDIR="$cwd/dest" bin_SCRIPTS=foo.sh test -f dest/usr/local/bin/foo.sh : diff --git a/t/instdir-prog.sh b/t/instdir-prog.sh index 2fa14e5c3..2c57157a9 100644 --- a/t/instdir-prog.sh +++ b/t/instdir-prog.sh @@ -68,20 +68,19 @@ cd build am_cv_python_pyexecdir="$instdir/pyexec" $MAKE -bindir= libdir= pyexecdir= -export bindir libdir pyexecdir -$MAKE -e install +nukedirs='bindir= libdir= pyexecdir=' + +run_make $nukedirs install test ! -e "$instdir" -$MAKE -e install DESTDIR="$destdir" +run_make $nukedirs install DESTDIR="$destdir" test ! -e "$instdir" test ! -e "$destdir" -$MAKE -e uninstall > stdout || { cat stdout; exit 1; } -cat stdout -# Creative quoting below to please maintainer-check. -grep 'rm'' ' stdout && exit 1 -$MAKE -e uninstall DESTDIR="$destdir" > stdout || { cat stdout; exit 1; } +run_make $nukedirs uninstall > stdout \ + || { cat stdout; exit 1; } cat stdout # Creative quoting below to please maintainer-check. grep 'rm'' ' stdout && exit 1 +run_make $nukedirs uninstall DESTDIR="$destdir" > stdout \ + || { cat stdout; exit 1; } : diff --git a/t/instdir-python.sh b/t/instdir-python.sh index 680f97ff5..e431a0635 100644 --- a/t/instdir-python.sh +++ b/t/instdir-python.sh @@ -46,17 +46,16 @@ cd build ../configure --prefix="$instdir" $MAKE -pythondir= -export pythondir +nukedirs='pythondir=' -$MAKE -e install +run_make $nukedirs install test ! -e "$instdir" -$MAKE -e install DESTDIR="$destdir" +run_make $nukedirs install DESTDIR="$destdir" test ! -e "$instdir" test ! -e "$destdir" -$MAKE -e uninstall > stdout || { cat stdout; exit 1; } +run_make $nukedirs uninstall > stdout || { cat stdout; exit 1; } cat stdout grep 'rm -f' stdout && exit 1 -$MAKE -e uninstall DESTDIR="$destdir" +run_make $nukedirs uninstall DESTDIR="$destdir" : diff --git a/t/instdir-texi.sh b/t/instdir-texi.sh index fa08e3e54..5cdaddbef 100644 --- a/t/instdir-texi.sh +++ b/t/instdir-texi.sh @@ -56,18 +56,17 @@ cd build $MAKE all dvi ps pdf html ls -l -infodir= htmldir= dvidir= psdir= pdfdir= -export infodir htmldir dvidir psdir pdfdir +nukedirs='infodir= htmldir= dvidir= psdir= pdfdir=' -$MAKE -e install install-html install-dvi install-ps install-pdf +run_make $nukedirs install install-html install-dvi install-ps install-pdf test ! -e "$instdir" -$MAKE -e install install-html install-dvi install-ps install-pdf \ - DESTDIR="$destdir" +run_make $nukedirs install install-html install-dvi install-ps install-pdf \ + DESTDIR="$destdir" test ! -e "$instdir" test ! -e "$destdir" -$MAKE -e uninstall > stdout || { cat stdout; exit 1; } +run_make $nukedirs uninstall > stdout || { cat stdout; exit 1; } cat stdout grep 'rm -f' stdout && exit 1 -$MAKE -e uninstall DESTDIR="$destdir" +run_make $nukedirs uninstall DESTDIR="$destdir" : diff --git a/t/instdir.sh b/t/instdir.sh index 06e14ac7e..bd5915bc7 100644 --- a/t/instdir.sh +++ b/t/instdir.sh @@ -55,17 +55,16 @@ cd build ../configure --prefix="$instdir" $MAKE -bindir= datadir= includedir= foodir= bardir= man1dir= man2dir= -export bindir datadir includedir foodir bardir man1dir man2dir +nukedirs='bindir= datadir= includedir= foodir= bardir= man1dir= man2dir=' -$MAKE -e install +run_make $nukedirs install test ! -e "$instdir" -$MAKE -e install DESTDIR="$destdir" +run_make $nukedirs install DESTDIR="$destdir" test ! -e "$instdir" test ! -e "$destdir" -$MAKE -e uninstall > stdout || { cat stdout; exit 1; } +run_make $nukedirs uninstall > stdout || { cat stdout; exit 1; } cat stdout grep 'rm -f' stdout && exit 1 -$MAKE -e uninstall DESTDIR="$destdir" +run_make $nukedirs uninstall DESTDIR="$destdir" : diff --git a/t/instdir2.sh b/t/instdir2.sh index 834078bd7..78a8acca0 100644 --- a/t/instdir2.sh +++ b/t/instdir2.sh @@ -77,17 +77,16 @@ cd build ../configure --prefix="$instdir" $MAKE -bindir= datadir= includedir= foodir= bardir= man1dir= man2dir= -export bindir datadir includedir foodir bardir man1dir man2dir +nukedirs='bindir= datadir= includedir= foodir= bardir= man1dir= man2dir=' -$MAKE -e install +run_make $nukedirs install test ! -e "$instdir" -$MAKE -e install DESTDIR="$destdir" +run_make $nukedirs install DESTDIR="$destdir" test ! -e "$instdir" test ! -e "$destdir" -$MAKE -e uninstall > stdout || { cat stdout; exit 1; } +run_make $nukedirs uninstall > stdout || { cat stdout; exit 1; } cat stdout grep 'rm -f' stdout && exit 1 -$MAKE -e uninstall DESTDIR="$destdir" +run_make $nukedirs uninstall DESTDIR="$destdir" : diff --git a/t/insthook.sh b/t/insthook.sh index 92840df96..d2558e204 100644 --- a/t/insthook.sh +++ b/t/insthook.sh @@ -59,7 +59,7 @@ test -f ok ./configure "--bindir=$(pwd)/bin" $MAKE install echo b > foo -VERSION=2.0 $MAKE -e install +run_make VERSION=2.0 install test $(cat bin/foo-1.0) = a test $(cat bin/foo-2.0) = b test $(cat bin/foo) = b diff --git a/t/instmany-mans.sh b/t/instmany-mans.sh index 2cb3ce9f8..eb0c9dbb9 100644 --- a/t/instmany-mans.sh +++ b/t/instmany-mans.sh @@ -30,26 +30,35 @@ subdir=long_subdir_name_with_many_characters nfiles=81 list=$(seq_ 1 $nfiles) -sed "s|@limit@|$limit|g" >myinstall.in <<'END' +oPATH=$PATH; export oPATH +nPATH=$(pwd)/x-bin$PATH_SEPARATOR$PATH; export nPATH + +mkdir x-bin + +sed "s|@limit@|$limit|g" >x-bin/my-install <<'END' #! /bin/sh # Fake install script. This doesn't really install # (the INSTALL path below would be wrong outside this directory). limit=@limit@ -INSTALL='@INSTALL@' -len=`expr "$INSTALL $*" : ".*" 2>/dev/null || echo $limit` +PATH=$oPATH; export PATH +if test -z "$orig_INSTALL"; then + echo "$0: \$orig_INSTALL variable not set" >&2 + exit 1 +fi +len=`expr "$orig_INSTALL $*" : ".*" 2>/dev/null || echo $limit` if test $len -ge $limit; then echo "$0: safe command line limit of $limit characters exceeded" >&2 exit 1 fi -exit 0 +exec $orig_INSTALL "$@" +exit 1 END # Creative quoting in the next line to please maintainer-check. -sed "s|@limit@|$limit|g" >'rm' <<'END' +sed "s|@limit@|$limit|g" >x-bin/'rm' <<'END' #! /bin/sh limit=@limit@ -PATH=$save_PATH -export PATH +PATH=$oPATH; export PATH RM='rm -f' len=`expr "$RM $*" : ".*" 2>/dev/null || echo $limit` if test $len -ge $limit; then @@ -60,10 +69,15 @@ exec $RM "$@" exit 1 END -chmod +x rm +# Creative quoting in the next line to please maintainer-check. +chmod +x x-bin/'rm' x-bin/my-install + +cat > setenv.in <<'END' +orig_INSTALL='@INSTALL@'; export orig_INSTALL +END cat >>configure.ac <myinstall.in <<'END' +oPATH=$PATH; export oPATH +nPATH=$(pwd)/x-bin$PATH_SEPARATOR$PATH; export nPATH + +mkdir x-bin + +sed "s|@limit@|$limit|g" >x-bin/my-install <<'END' #! /bin/sh # Fake install script. This doesn't really install # (the INSTALL path below would be wrong outside this directory). limit=@limit@ -INSTALL='@INSTALL@' -len=`expr "$INSTALL $*" : ".*" 2>/dev/null || echo $limit` +PATH=$oPATH; export PATH +if test -z "$orig_INSTALL"; then + echo "$0: \$orig_INSTALL variable not set" >&2 + exit 1 +fi +len=`expr "$orig_INSTALL $*" : ".*" 2>/dev/null || echo $limit` if test $len -ge $limit; then echo "$0: safe command line limit of $limit characters exceeded" >&2 exit 1 fi -exit 0 +exec $orig_INSTALL "$@" +exit 1 END # Creative quoting in the next line to please maintainer-check. -sed "s|@limit@|$limit|g" >'rm' <<'END' +sed "s|@limit@|$limit|g" >x-bin/'rm' <<'END' #! /bin/sh limit=@limit@ -PATH=$save_PATH -export PATH +PATH=$oPATH; export PATH RM='rm -f' len=`expr "$RM $*" : ".*" 2>/dev/null || echo $limit` if test $len -ge $limit; then @@ -56,11 +65,16 @@ exec $RM "$@" exit 1 END -chmod +x rm +# Creative quoting in the next line to please maintainer-check. +chmod +x x-bin/'rm' x-bin/my-install + +cat > setenv.in <<'END' +orig_INSTALL='@INSTALL@'; export orig_INSTALL +END cat >>configure.ac <myinstall.in <<'END' +oPATH=$PATH; export oPATH +nPATH=$(pwd)/x-bin$PATH_SEPARATOR$PATH; export nPATH + +mkdir x-bin + +sed "s|@limit@|$limit|g" >x-bin/my-install <<'END' #! /bin/sh # Fake install script. This doesn't really install # (the INSTALL path below would be wrong outside this directory). limit=@limit@ -INSTALL='@INSTALL@' -len=`expr "$INSTALL $*" : ".*" 2>/dev/null || echo $limit` +PATH=$oPATH; export PATH +if test -z "$orig_INSTALL"; then + echo "$0: \$orig_INSTALL variable not set" >&2 + exit 1 +fi +len=`expr "$orig_INSTALL $*" : ".*" 2>/dev/null || echo $limit` if test $len -ge $limit; then echo "$0: safe command line limit of $limit characters exceeded" >&2 exit 1 fi -exit 0 +exec $orig_INSTALL "$@" +exit 1 END # Creative quoting in the next line to please maintainer-check. -sed "s|@limit@|$limit|g" >'rm' <<'END' +sed "s|@limit@|$limit|g" >x-bin/'rm' <<'END' #! /bin/sh limit=@limit@ -PATH=$save_PATH -export PATH +PATH=$oPATH; export PATH RM='rm -f' len=`expr "$RM $*" : ".*" 2>/dev/null || echo $limit` if test $len -ge $limit; then @@ -68,10 +77,15 @@ exec $RM "$@" exit 1 END -chmod +x rm +# Creative quoting in the next line to please maintainer-check. +chmod +x x-bin/'rm' x-bin/my-install + +cat > setenv.in <<'END' +orig_INSTALL='@INSTALL@'; export orig_INSTALL +END cat >>configure.ac <output 2>&1 || { cat output; exit 1; } +run_make \ + LDFLAGS=ldflags \ + AM_LDFLAGS=am_ldflags \ + libmod1_la_LDFLAGS=lm1_la_ldflags \ + CFLAGS=cflags \ + AM_CFLAGS=am_cflags \ + prg2_CFLAGS=prg2_cflags \ + print >output 2>&1 || { cat output; exit 1; } cat output grep '1BEG: libmod1.la mod2.la :END1' output grep '2BEG: mod2.la :END2' output diff --git a/t/link_cond.sh b/t/link_cond.sh index 43f06d812..98b523bc3 100644 --- a/t/link_cond.sh +++ b/t/link_cond.sh @@ -60,11 +60,11 @@ main () END ./configure have_cxx=no -CXX=false $MAKE -e +run_make CXX=false # Sanity check. rm -f foo foo.exe -CC=false $MAKE -e && exit 99 +run_make CC=false && exit 99 $MAKE distclean @@ -79,10 +79,10 @@ int main (void) END ./configure have_cxx=yes -CC=false $MAKE -e +run_make CC=false # Sanity check. rm -f foo foo.exe -CXX=false $MAKE -e && exit 99 +run_make CXX=false && exit 99 : diff --git a/t/lisp-flags.sh b/t/lisp-flags.sh index a31bcfdf0..ee156d777 100644 --- a/t/lisp-flags.sh +++ b/t/lisp-flags.sh @@ -18,10 +18,6 @@ . test-init.sh -# Don't get fooled when running as an Emacs subprocess. This is -# for the benefit of the "make -e" invocation below. -unset EMACS - cat > Makefile.am << 'EOF' lisp_LISP = foo.el AM_ELCFLAGS = __am_elcflags__ @@ -39,7 +35,7 @@ $AUTOMAKE --add-missing ./configure EMACS='echo >$@' --with-lispdir="$(pwd)/unused" : > foo.el -ELCFLAGS='__usr_elcflags__' $MAKE -e +run_make ELCFLAGS='__usr_elcflags__' grep '__am_elcflags__.*__usr_elcflags__' foo.elc : diff --git a/t/man3.sh b/t/man3.sh index 24a239289..31c283298 100644 --- a/t/man3.sh +++ b/t/man3.sh @@ -39,6 +39,6 @@ $ACLOCAL $AUTOMAKE $AUTOCONF ./configure -DISTCHECK_CONFIGURE_FLAGS=foo=bar $MAKE -e distcheck +run_make DISTCHECK_CONFIGURE_FLAGS='foo=bar' distcheck : diff --git a/t/mmodely.sh b/t/mmodely.sh index cb3152dd3..42f8ca4ae 100644 --- a/t/mmodely.sh +++ b/t/mmodely.sh @@ -87,8 +87,7 @@ PATH=$(pwd)$PATH_SEPARATOR$PATH; export PATH # per GNU Standard. $MAKE maintainer-clean ./configure -YACC="myyacc.sh" LEX="mylex.sh" \ - LEX_OUTPUT_ROOT='lex.yy' $MAKE -e zardoz.c joe.c +run_make YACC=myyacc.sh LEX=mylex.sh LEX_OUTPUT_ROOT=lex.yy zardoz.c joe.c $FGREP zardoz.y zardoz.c $FGREP joe.l joe.c diff --git a/t/parallel-tests-basics.sh b/t/parallel-tests-basics.sh index d86e054d7..4d0fe9502 100644 --- a/t/parallel-tests-basics.sh +++ b/t/parallel-tests-basics.sh @@ -87,7 +87,7 @@ test ! -e test-suite.log # Note that this usage has a problem: the summary will only # take bar.log into account, because the $(TEST_SUITE_LOG) rule # does not "see" baz.log. Hmm. -env TESTS='bar.test' $MAKE -e check >stdout && { cat stdout; exit 1; } +run_make TESTS='bar.test' check >stdout && { cat stdout; exit 1; } cat stdout grep '^FAIL: baz\.test$' stdout grep '^ERROR: bar\.test$' stdout @@ -103,7 +103,7 @@ test -f test-suite.log # Note that the previous test and this one taken together expose the timing # issue that requires the check-TESTS rule to always remove TEST_SUITE_LOG # before running the tests lazily. -env RECHECK_LOGS= $MAKE -e check > stdout && { cat stdout; exit 1; } +run_make RECHECK_LOGS= check > stdout && { cat stdout; exit 1; } cat stdout test -f foo.log grep '^PASS: foo\.test$' stdout @@ -115,7 +115,7 @@ grep '^# ERROR: *1$' stdout # Now, explicitly retry with all test logs already updated, and ensure # that the summary is still displayed. -env RECHECK_LOGS= $MAKE -e check > stdout && { cat stdout; exit 1; } +run_make RECHECK_LOGS= check > stdout && { cat stdout; exit 1; } cat stdout grep foo.test stdout && exit 1 grep bar.test stdout && exit 1 @@ -125,7 +125,7 @@ grep '^# FAIL: *1$' stdout grep '^# ERROR: *1$' stdout # Lazily rerunning only foo should only rerun this one test. -env RECHECK_LOGS=foo.log $MAKE -e check > stdout && { cat stdout; exit 1; } +run_make RECHECK_LOGS=foo.log check > stdout && { cat stdout; exit 1; } cat stdout grep foo.test stdout grep bar.test stdout && exit 1 @@ -135,14 +135,14 @@ grep '^# FAIL: *1$' stdout grep '^# ERROR: *1$' stdout $MAKE clean -env TEST_LOGS=baz.log $MAKE -e check > stdout && { cat stdout; exit 1; } +run_make TEST_LOGS=baz.log check > stdout && { cat stdout; exit 1; } cat stdout grep foo.test stdout && exit 1 grep bar.test stdout && exit 1 grep baz.test stdout $MAKE clean -env TESTS=baz.test $MAKE -e check > stdout && { cat stdout; exit 1; } +run_make TESTS=baz.test check > stdout && { cat stdout; exit 1; } cat stdout grep foo.test stdout && exit 1 grep bar.test stdout && exit 1 diff --git a/t/parallel-tests-cmdline-override.sh b/t/parallel-tests-cmdline-override.sh index ab27784bc..ef78c2632 100644 --- a/t/parallel-tests-cmdline-override.sh +++ b/t/parallel-tests-cmdline-override.sh @@ -60,7 +60,7 @@ END do_check () { - env "$@" $MAKE -e check >stdout || { cat stdout; exit 1; } + run_make "$@" check >stdout || { cat stdout; exit 1; } cat stdout grep '^PASS:' stdout | LC_ALL=C sort > got-out cat got-out diff --git a/t/parallel-tests-empty-testlogs.sh b/t/parallel-tests-empty-testlogs.sh index 995b831aa..95b3657a7 100644 --- a/t/parallel-tests-empty-testlogs.sh +++ b/t/parallel-tests-empty-testlogs.sh @@ -80,9 +80,9 @@ for vpath in : false; do VERBOSE=yes $MAKE check no_test_has_run cd ../sub2 - VERBOSE=yes TESTS='' $MAKE -e check + run_make VERBOSE=yes TESTS= check no_test_has_run - VERBOSE=yes TEST_LOGS='' $MAKE -e check + run_make VERBOSE=yes TEST_LOGS= check no_test_has_run cd .. $MAKE check diff --git a/t/parallel-tests-exit-statuses.sh b/t/parallel-tests-exit-statuses.sh index d77c3b44d..8612004d6 100644 --- a/t/parallel-tests-exit-statuses.sh +++ b/t/parallel-tests-exit-statuses.sh @@ -62,40 +62,33 @@ $AUTOMAKE -a for st in $failure_statuses; do echo "FAIL: $st" done -} | LC_ALL=C sort > exp-fail +} | LC_ALL=C sort > exp-0 -sed 's/^FAIL:/XFAIL:/' exp-fail | LC_ALL=C sort > exp-xfail-1 -sed '/^ERROR:/d' exp-xfail-1 > exp-xfail-2 +sed 's/^FAIL:/XFAIL:/' exp-0 | LC_ALL=C sort > exp-1 +sed '/^ERROR:/d' exp-1 > exp-2 -sort exp-fail -sort exp-xfail-1 -sort exp-xfail-2 +sort exp-0 +sort exp-1 +sort exp-2 ./configure -st=1 -$MAKE check >stdout && st=0 -cat stdout -cat test-suite.log -test $st -gt 0 || exit 1 -LC_ALL=C grep '^[A-Z][A-Z]*:' stdout | LC_ALL=C sort > got-fail -diff exp-fail got-fail - -st=1 -XFAIL_TESTS="$failure_statuses 99" $MAKE -e check >stdout && st=0 -cat stdout -cat test-suite.log -test $st -gt 0 || exit 1 -LC_ALL=C grep '^[A-Z][A-Z]*:' stdout | LC_ALL=C sort > got-xfail-1 -diff exp-xfail-1 got-xfail-1 +mk_ () +{ + n=$1; shift + unset am_make_rc_got + run_make -e IGNORE ${1+"$@"} check > stdout + cat stdout + cat test-suite.log + LC_ALL=C grep '^[A-Z][A-Z]*:' stdout | LC_ALL=C sort > got-$n + diff exp-$n got-$n +} -st=0 -XFAIL_TESTS="$failure_statuses" TESTS="0 77 $failure_statuses" \ - $MAKE -e check >stdout || st=$? -cat stdout -cat test-suite.log -test $st -eq 0 || exit 1 -LC_ALL=C grep '^[A-Z][A-Z]*:' stdout | LC_ALL=C sort > got-xfail-2 -diff exp-xfail-2 got-xfail-2 +mk_ 0 +test $am_make_rc_got -gt 0 +mk_ 1 XFAIL_TESTS="$failure_statuses 99" +test $am_make_rc_got -gt 0 +mk_ 2 XFAIL_TESTS="$failure_statuses" TESTS="0 77 $failure_statuses" +test $am_make_rc_got -eq 0 : diff --git a/t/parallel-tests-extra-programs.sh b/t/parallel-tests-extra-programs.sh index 73e2fda65..b8d7a99de 100644 --- a/t/parallel-tests-extra-programs.sh +++ b/t/parallel-tests-extra-programs.sh @@ -158,11 +158,10 @@ $sleep echo 'int main (void) { return 0; }' > none.c -st=0 -RECHECK_LOGS= $MAKE -e check >stdout || st=$? +run_make -e IGNORE RECHECK_LOGS= check >stdout cat stdout -ls -l -test $st -eq 0 || exit 1 +ls -l # For debugging. +test $am_make_rc_got -eq 0 || exit 1 # For debugging. stat stamp foo.log bar.log baz.log || : diff --git a/t/parallel-tests-fork-bomb.sh b/t/parallel-tests-fork-bomb.sh index 215294b7b..e63c0d760 100644 --- a/t/parallel-tests-fork-bomb.sh +++ b/t/parallel-tests-fork-bomb.sh @@ -100,7 +100,7 @@ do_check () { st=0 log=$1; shift - env "$@" $MAKE -e check >output 2>&1 || st=$? + run_make "$@" check >output 2>&1 || st=$? cat output $FGREP '::OOPS::' output && exit 1 # Possible infinite recursion. # Check that at least we don't create a botched global log file. diff --git a/t/parallel-tests-harderror.sh b/t/parallel-tests-harderror.sh index 3563cfe52..26832a655 100644 --- a/t/parallel-tests-harderror.sh +++ b/t/parallel-tests-harderror.sh @@ -64,13 +64,12 @@ DISABLE_HARD_ERRORS=x $MAKE check # But an empty values for DISABLE_HARD_ERRORS means that hard errors # are not to be counted like normal failures. -$MAKE check DISABLE_HARD_ERRORS='' && exit 1 +$MAKE check DISABLE_HARD_ERRORS= && exit 1 cat test-suite.log grep '^ERROR: foo$' test-suite.log cd sub -# The '-e' is wanted here. -DISABLE_HARD_ERRORS='' $MAKE -e check && exit 1 +$MAKE check DISABLE_HARD_ERRORS= && exit 1 cat test-suite.log grep '^ERROR: bar$' test-suite.log cd .. diff --git a/t/parallel-tests-log-compiler-1.sh b/t/parallel-tests-log-compiler-1.sh index 6434ae926..fd1f1c6ae 100644 --- a/t/parallel-tests-log-compiler-1.sh +++ b/t/parallel-tests-log-compiler-1.sh @@ -111,7 +111,7 @@ test -f bla.log test -f bli.suff.log test -f sub/test.log -T_LOG_FLAGS=--bad $MAKE -e check && exit 1 +run_make -e FAIL T_LOG_FLAGS=--bad check cat test-suite.log cat bla.log # With the above flag overridden, bla.t should fail ... diff --git a/t/parallel-tests-log-override-1.sh b/t/parallel-tests-log-override-1.sh index 46520b66e..49fba566d 100644 --- a/t/parallel-tests-log-override-1.sh +++ b/t/parallel-tests-log-override-1.sh @@ -76,19 +76,19 @@ $MAKE clean test -f test-suite.log && exit 99 # Sanity check. # Check that we can override the testsuite log file at runtime. -TEST_SUITE_LOG=zardoz.log $MAKE -e check +run_make TEST_SUITE_LOG=zardoz.log check ls -l test ! -e test-suite.log cat zardoz.log test_log_expected zardoz.log # Sanity check the distribution too (this also does minimal checks on # VPATH support). -TEST_SUITE_LOG=zardoz.log $MAKE -e distcheck +run_make TEST_SUITE_LOG=zardoz.log distcheck # Check that cleanup rules remove the correct file even when # user overrides are in place. cp orig test-suite.log -TEST_SUITE_LOG=zardoz.log $MAKE -e clean +run_make TEST_SUITE_LOG=zardoz.log clean ls -l test ! -e zardoz.log diff orig test-suite.log @@ -97,11 +97,11 @@ diff orig test-suite.log # Also check that the testsuite log file doesn't need to be named # accordingly to the '*.log' pattern. chmod a-w test-suite.log -TEST_SUITE_LOG=TheLogFile $MAKE -e check +run_make TEST_SUITE_LOG=TheLogFile check ls -l diff orig test-suite.log test_log_expected TheLogFile -TEST_SUITE_LOG=TheLogFile $MAKE -e clean +run_make TEST_SUITE_LOG=TheLogFile clean ls -l test ! -e TheLogFile diff orig test-suite.log diff --git a/t/parallel-tests-log-override-2.sh b/t/parallel-tests-log-override-2.sh index 8accc7b26..54e2ed924 100644 --- a/t/parallel-tests-log-override-2.sh +++ b/t/parallel-tests-log-override-2.sh @@ -60,8 +60,8 @@ for test_list_override in \ 'TESTS=pass.test skip.test' \ 'TEST_LOGS=pass.log skip.log' do - env TEST_SUITE_LOG=partial.log "$test_list_override" \ - $MAKE -e check >stdout || { cat stdout; exit 1; } + run_make TEST_SUITE_LOG=partial.log "$test_list_override" check >stdout \ + || { cat stdout; exit 1; } cat stdout ls -l count_test_results total=2 pass=1 fail=0 skip=1 xfail=0 xpass=0 error=0 diff --git a/t/parallel-tests-log-override-recheck.sh b/t/parallel-tests-log-override-recheck.sh index d1fec7f25..ff6f58262 100644 --- a/t/parallel-tests-log-override-recheck.sh +++ b/t/parallel-tests-log-override-recheck.sh @@ -67,7 +67,7 @@ cat stdout using_gmake || $sleep # Required by BSD make. chmod a-rw test-suite.log -TEST_SUITE_LOG=my.log $MAKE -e recheck >stdout \ +run_make TEST_SUITE_LOG=my.log recheck >stdout \ && { cat stdout; exit 1; } cat stdout ls -l @@ -82,7 +82,7 @@ done using_gmake || $sleep # Required by BSD make. chmod a-rw my.log -BAZ_EXIT_STATUS=0 TEST_SUITE_LOG=my2.log $MAKE -e recheck >stdout \ +run_make BAZ_EXIT_STATUS=0 TEST_SUITE_LOG=my2.log recheck >stdout \ && { cat stdout; exit 1; } cat stdout ls -l diff --git a/t/parallel-tests-no-color-in-log.sh b/t/parallel-tests-no-color-in-log.sh index b8a56815c..966501658 100644 --- a/t/parallel-tests-no-color-in-log.sh +++ b/t/parallel-tests-no-color-in-log.sh @@ -45,7 +45,7 @@ $AUTOMAKE --add-missing ./configure mv config.log config-log # Avoid possible false positives below. -AM_COLOR_TESTS=always $MAKE -e check && exit 1 +run_make -e FAIL AM_COLOR_TESTS=always check # Not a useless use of cat; see above comments "grep-nonprinting" # requirement in 'test-init.sh'. cat *.log | grep "$esc" && exit 1 diff --git a/t/parallel-tests-recheck-pr11791.sh b/t/parallel-tests-recheck-pr11791.sh index ac3a38906..d0629f6ca 100644 --- a/t/parallel-tests-recheck-pr11791.sh +++ b/t/parallel-tests-recheck-pr11791.sh @@ -14,8 +14,8 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . -# parallel-tests: "make recheck" "make -k recheck" in the face of build -# failures for the test cases. See automake bug#11791. +# parallel-tests: "make recheck" and "make -k recheck" in the face of +# build failures for the test cases. See automake bug#11791. required='cc native' . test-init.sh @@ -42,6 +42,7 @@ $MAKE check >stdout && { cat stdout; exit 1; } cat stdout count_test_results total=1 pass=0 fail=1 xpass=0 xfail=0 skip=0 error=0 +$sleep # Required to avoid a spurious failure with some FreeBSD makes. st=0; $MAKE -k recheck >stdout || st=$? cat stdout # Don't trust the exit status of "make -k" for non-GNU makes. @@ -61,6 +62,7 @@ $EGREP '(X?PASS|X?FAIL|SKIP|ERROR):' stdout && exit 1 test -f foo.log test -f foo.trs +$sleep # Required to avoid a spurious failure with some FreeBSD makes. st=0; $MAKE -k recheck >stdout || st=$? cat stdout # Don't trust the exit status of "make -k" for non-GNU makes. diff --git a/t/remake-subdir-long-time.sh b/t/remake-subdir-long-time.sh index 1cbd02e2a..cf03335c6 100644 --- a/t/remake-subdir-long-time.sh +++ b/t/remake-subdir-long-time.sh @@ -93,14 +93,14 @@ rm -f automake-has-run aclocal-has-run ./configure # Sanity check: Makefile doesn't get updated uselessly. -ACLOCAL=false AUTOMAKE=false AUTOCONF=false $MAKE -e +run_make ACLOCAL=false AUTOMAKE=false AUTOCONF=false $sleep sed "s|magic|magic2|" configure.ac > t mv -f t configure.ac cd sub -AUTOMAKE="$AUTOMAKE" ACLOCAL="$ACLOCAL" $MAKE -e Makefile +run_make Makefile AUTOMAKE="$AUTOMAKE" ACLOCAL="$ACLOCAL" cd .. # For debugging. diff --git a/t/remake-timing-bug-pr8365.sh b/t/remake-timing-bug-pr8365.sh index 662b1743e..5060fd6bf 100644 --- a/t/remake-timing-bug-pr8365.sh +++ b/t/remake-timing-bug-pr8365.sh @@ -98,9 +98,8 @@ END chmod a+x aclocal-wrap automake-wrap autoconf-wrap -env \ - ACLOCAL=./aclocal-wrap AUTOMAKE=./automake-wrap AUTOCONF=./autoconf-wrap \ - $MAKE -e Makefile +run_make Makefile \ + ACLOCAL=./aclocal-wrap AUTOMAKE=./automake-wrap AUTOCONF=./autoconf-wrap grep '^FOOBAR =' Makefile.in grep '^FOOBAR *= *zardoz *$' Makefile diff --git a/t/subst-no-trailing-empty-line.sh b/t/subst-no-trailing-empty-line.sh index 860b427d4..3fcb1b7ac 100644 --- a/t/subst-no-trailing-empty-line.sh +++ b/t/subst-no-trailing-empty-line.sh @@ -82,13 +82,13 @@ test $($EGREP -c "^[ $tab]*@$v2@ @$v3@[ $tab]*$bs?$" Makefile.in) -eq 3 cat t-programs grep '^ *$' t-programs && exit 1 -$MAKE print-programs >stdout || { cat stdout; exit 1; } +run_make print-programs >stdout || { cat stdout; exit 1; } cat stdout grep '^BEG1: x :END1$' stdout grep '^BEG2: :END2$' stdout grep '^BEG3: zardoz x :END3$' stdout -am__empty=X $MAKE -e print-programs >stdout || { cat stdout; exit 1; } +run_make am__empty=X print-programs >stdout || { cat stdout; exit 1; } cat stdout grep '^BEG1: x X :END1$' stdout grep '^BEG2: X :END2$' stdout diff --git a/t/suffix-custom-subobj.sh b/t/suffix-custom-subobj.sh index 04d4350e2..6c012297b 100644 --- a/t/suffix-custom-subobj.sh +++ b/t/suffix-custom-subobj.sh @@ -53,7 +53,7 @@ $AUTOMAKE -a ./configure -OBJEXT=quux $MAKE -e test-fake +run_make OBJEXT=quux test-fake $MAKE test-real : diff --git a/t/suffix11.tap b/t/suffix11.tap index 60d193be9..5ee21af4b 100644 --- a/t/suffix11.tap +++ b/t/suffix11.tap @@ -68,7 +68,7 @@ command_ok_ "warn about unportable make usage" \ command_ok_ "automake" $AUTOMAKE -a -Wno-portability command_ok_ "configure" ./configure -command_ok_ "make test-fake" env OBJEXT=foo $MAKE -e test-fake +command_ok_ "make test-fake" run_make OBJEXT=foo test-fake command_ok_ "make test-real" $MAKE test-real directive=''; make_can_chain_suffix_rules || directive=TODO diff --git a/t/suffix6c.sh b/t/suffix6c.sh index 00c6da30c..319b64942 100644 --- a/t/suffix6c.sh +++ b/t/suffix6c.sh @@ -70,7 +70,7 @@ cat > foo.exp <<'END' %TWO% END echo %TWO% > foo.zoo -OBJEXT=o $MAKE -e +run_make OBJEXT=o cat foo.o cat foo.XxX diff foo.XxX foo.exp @@ -82,7 +82,7 @@ cat > foo.exp <<'END' %THREE% END echo %THREE% > foo.zoo -OBJEXT=obj $MAKE -e +run_make OBJEXT=obj cat foo.obj cat foo.XxX diff foo.XxX foo.exp diff --git a/t/suffix8.tap b/t/suffix8.tap index 7da543f61..12df48bf4 100644 --- a/t/suffix8.tap +++ b/t/suffix8.tap @@ -91,7 +91,7 @@ command_ok_ "aclocal" $ACLOCAL command_ok_ "autoconf" $AUTOCONF command_ok_ "automake" $AUTOMAKE -a command_ok_ "configure" protect_output ./configure -command_ok_ "make test0" env OBJEXT=foo $MAKE -e test0 +command_ok_ "make test0" run_make OBJEXT=foo test0 command_ok_ "make test1" $MAKE test1 directive=''; make_can_chain_suffix_rules || directive=TODO diff --git a/t/tap-autonumber.sh b/t/tap-autonumber.sh index dbefb866a..f1820ce86 100644 --- a/t/tap-autonumber.sh +++ b/t/tap-autonumber.sh @@ -44,7 +44,7 @@ not ok ok END -TESTS=all.test $MAKE -e check >stdout && { cat stdout; exit 1; } +run_make TESTS=all.test check >stdout && { cat stdout; exit 1; } cat stdout count_test_results total=14 pass=6 fail=5 xpass=1 xfail=1 skip=1 error=0 diff --git a/t/tap-bailout-leading-space.sh b/t/tap-bailout-leading-space.sh index fda4b36d5..c84c61242 100644 --- a/t/tap-bailout-leading-space.sh +++ b/t/tap-bailout-leading-space.sh @@ -50,7 +50,7 @@ ERROR: b.test - Bail out! ERROR: c.test - Bail out! FUBAR! END -TESTS='a.test b.test c.test' $MAKE -e check >stdout \ +run_make TESTS='a.test b.test c.test' check >stdout \ && { cat stdout; exit 1; } cat stdout diff --git a/t/tap-bailout-suppress-later-errors.sh b/t/tap-bailout-suppress-later-errors.sh index 936f71fb4..7f602942c 100644 --- a/t/tap-bailout-suppress-later-errors.sh +++ b/t/tap-bailout-suppress-later-errors.sh @@ -52,7 +52,7 @@ ok 2 ok 3 END -TESTS='foo.test bar.test baz.test' $MAKE -e check >stdout \ +run_make TESTS='foo.test bar.test baz.test' check >stdout \ && { cat stdout; exit 1; } cat stdout diff --git a/t/tap-bailout.sh b/t/tap-bailout.sh index 635b7767b..b6c0f56d1 100644 --- a/t/tap-bailout.sh +++ b/t/tap-bailout.sh @@ -118,7 +118,7 @@ echo "ERROR: e.test - Bail out!" >> exp # Doing the sums above, we have: test_counts='total=12 pass=3 fail=1 xpass=1 xfail=1 skip=1 error=5' -TESTS='a.test b.test c.test d.test e.test' $MAKE -e check >stdout \ +run_make TESTS='a.test b.test c.test d.test e.test' check >stdout \ && { cat stdout; exit 1; } cat stdout diff --git a/t/tap-basic.sh b/t/tap-basic.sh index 680d18d2c..5e4462b26 100644 --- a/t/tap-basic.sh +++ b/t/tap-basic.sh @@ -127,7 +127,7 @@ Bail out! ok 1 END -TESTS=bail.test $MAKE -e check >stdout && { cat stdout; exit 1; } +run_make check TESTS=bail.test >stdout && { cat stdout; exit 1; } cat stdout count_test_results total=1 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=1 @@ -146,7 +146,7 @@ $FGREP 'success.test' stdout && exit 1 rm -f *.log *.test -TEST_LOGS=ok.log $MAKE -e check >stdout || { cat stdout; exit 1; } +run_make check TEST_LOGS=ok.log >stdout || { cat stdout; exit 1; } cat stdout count_test_results total=3 pass=1 fail=0 xpass=0 xfail=1 skip=1 error=0 diff --git a/t/tap-color.sh b/t/tap-color.sh index ca2ee1727..997cb7965 100644 --- a/t/tap-color.sh +++ b/t/tap-color.sh @@ -152,13 +152,13 @@ test_no_color () # Forced colorization should take place also with non-ANSI terminals; # hence the "TERM=dumb" definition. -TERM=dumb AM_COLOR_TESTS=always $MAKE check >stdout \ - && { cat stdout; exit 1; } +AM_COLOR_TESTS=always; export AM_COLOR_TESTS +run_make TERM=dumb check >stdout && { cat stdout; exit 1; } cat stdout test_color -TERM=ansi $MAKE -e check >stdout \ - && { cat stdout; exit 1; } +unset AM_COLOR_TESTS +run_make TERM=ansi check >stdout && { cat stdout; exit 1; } cat stdout test_no_color diff --git a/t/tap-diagnostic.sh b/t/tap-diagnostic.sh index 7834f6126..59b1bda41 100644 --- a/t/tap-diagnostic.sh +++ b/t/tap-diagnostic.sh @@ -66,7 +66,7 @@ cat got diff exp got count_test_results total=4 pass=2 fail=0 xpass=0 xfail=1 skip=1 error=0 -TEST_LOG_DRIVER_FLAGS="--no-comments" $MAKE -e check >stdout \ +run_make TEST_LOG_DRIVER_FLAGS="--no-comments" check >stdout \ || { cat stdout; exit 1; } cat stdout $EGREP -i "#.*all\\.test|a comment|(Tests|Shell) " stdout && exit 1 diff --git a/t/tap-doc2.sh b/t/tap-doc2.sh index 0d4bf14dd..55c734bd8 100644 --- a/t/tap-doc2.sh +++ b/t/tap-doc2.sh @@ -106,10 +106,10 @@ diff exp got grep '^Please report to bug-automake@gnu\.org$' stdout -env \ +run_make >stdout check \ TESTS='foo.test baz.test' \ TEST_LOG_DRIVER_FLAGS='--comments --ignore-exit' \ - $MAKE -e check >stdout || { cat stdout; exit 1; } + || { cat stdout; exit 1; } cat > exp <<'END' PASS: foo.test 1 - Swallows fly diff --git a/t/tap-global-log.sh b/t/tap-global-log.sh index fc4a8fb75..b303b4ad5 100644 --- a/t/tap-global-log.sh +++ b/t/tap-global-log.sh @@ -101,8 +101,7 @@ cat > skipall.test << 'END' 1..0 # SKIP all END -# We don't care about the exit status of "make check" here. -TESTS="$(echo *.test)" $MAKE -e check || : +run_make -e IGNORE TESTS="$(echo *.test)" check cat test-suite.log grep ':.*ok|not seen' test-suite.log && exit 1 diff --git a/t/tap-global-result.sh b/t/tap-global-result.sh index f3718d300..a4a1fd161 100644 --- a/t/tap-global-result.sh +++ b/t/tap-global-result.sh @@ -140,7 +140,7 @@ END tests=$(echo *.test) # Also required later. -TESTS="$tests" $MAKE -e check >stdout && { cat stdout; exit 1; } +run_make TESTS="$tests" check >stdout && { cat stdout; exit 1; } cat stdout # Dirty trick required here. @@ -149,7 +149,7 @@ for tst in $(echo " $tests " | sed 's/\.test / /'); do done rm -f test-suite.log -TESTS="$tests" $MAKE -e test-suite.log && exit 1 +run_make -e FAIL TESTS="$tests" test-suite.log cat test-suite.log have_rst_section () diff --git a/t/tap-log.sh b/t/tap-log.sh index ef5429703..d7eab8a58 100644 --- a/t/tap-log.sh +++ b/t/tap-log.sh @@ -85,7 +85,7 @@ END chmod a+x *.test -TEST_SUITE_LOG=my.log $MAKE -e check && exit 1 +run_make -e FAIL TEST_SUITE_LOG=my.log check ls -l # For debugging. test ! -e test-suite.log test ! -e global.log @@ -116,7 +116,7 @@ $FGREP 'xpass.test' my.log $FGREP 'error.test' my.log touch error2.log test-suite.log global.log -TEST_SUITE_LOG=my.log $MAKE -e mostlyclean +run_make TEST_SUITE_LOG=my.log mostlyclean ls -l # For debugging. test ! -e my.log test ! -e pass.log diff --git a/t/tap-merge-stdout-stderr.sh b/t/tap-merge-stdout-stderr.sh index ad954121d..ef99d8204 100644 --- a/t/tap-merge-stdout-stderr.sh +++ b/t/tap-merge-stdout-stderr.sh @@ -60,7 +60,7 @@ count_test_results total=2 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=1 # See that the option '--no-merge' can override the effect of '--merge'. -TEST_LOG_DRIVER_FLAGS=--no-merge $MAKE -e check >stdout \ +run_make TEST_LOG_DRIVER_FLAGS=--no-merge check >stdout \ || { cat stdout; exit 1; } cat stdout diff --git a/t/tap-msg0-bailout.sh b/t/tap-msg0-bailout.sh index c30242522..9e2bdcedf 100644 --- a/t/tap-msg0-bailout.sh +++ b/t/tap-msg0-bailout.sh @@ -26,7 +26,7 @@ echo 'Bail out! 0' > a.test echo 'Bail out! 0.0' > b.test -TESTS='a.test b.test' $MAKE -e check >stdout && { cat stdout; exit 1; } +run_make TESTS='a.test b.test' check >stdout && { cat stdout; exit 1; } cat stdout count_test_results total=2 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=2 diff --git a/t/tap-msg0-planskip.sh b/t/tap-msg0-planskip.sh index 131d4389a..3c6252d77 100644 --- a/t/tap-msg0-planskip.sh +++ b/t/tap-msg0-planskip.sh @@ -25,7 +25,7 @@ echo '1..0 # SKIP 0' > a.test echo '1..0 # SKIP 0.0' > b.test -TESTS='a.test b.test' $MAKE -e check >stdout || { cat stdout; exit 1; } +run_make TESTS='a.test b.test' check >stdout || { cat stdout; exit 1; } cat stdout count_test_results total=2 pass=0 fail=0 xpass=0 xfail=0 skip=2 error=0 diff --git a/t/tap-out-of-order.sh b/t/tap-out-of-order.sh index 6b9806016..bac7acdb5 100644 --- a/t/tap-out-of-order.sh +++ b/t/tap-out-of-order.sh @@ -57,7 +57,7 @@ ok 16 ok 17 END -TESTS='a.test b.test c.test d.test' $MAKE -e check >stdout \ +run_make TESTS='a.test b.test c.test d.test' check >stdout \ && { cat stdout; exit 1; } cat stdout diff --git a/t/tap-passthrough-exit.sh b/t/tap-passthrough-exit.sh index fbe7e9ee2..cf9ea4614 100644 --- a/t/tap-passthrough-exit.sh +++ b/t/tap-passthrough-exit.sh @@ -52,7 +52,7 @@ for e in $exit_statuses; do done done -env TEST_LOG_DRIVER_FLAGS='--ignore-exit' $MAKE -e check +run_make check TEST_LOG_DRIVER_FLAGS='--ignore-exit' $FGREP ".test - exited with status" *.log && exit 1 : diff --git a/t/tap-passthrough.sh b/t/tap-passthrough.sh index e7c9fca56..8132f5380 100644 --- a/t/tap-passthrough.sh +++ b/t/tap-passthrough.sh @@ -46,7 +46,7 @@ ok # SKIP who cares? $weirdchars END -TESTS=ok.test $MAKE -e check || { cat ok.log; exit 1; } +run_make TESTS=ok.test check || { cat ok.log; exit 1; } cat ok.log for rx in \ @@ -115,8 +115,8 @@ Last line END st=0 -env TESTS='tiny.test ok.test ko.test bail.test skip.test err.test' \ - $MAKE -e check || st=$? +run_make check \ + TESTS='tiny.test ok.test ko.test bail.test skip.test err.test' || st=$? cat tiny.log cat ok.log cat ko.log diff --git a/t/tap-plan-corner.sh b/t/tap-plan-corner.sh index b3b81b816..27f41fdbc 100644 --- a/t/tap-plan-corner.sh +++ b/t/tap-plan-corner.sh @@ -36,7 +36,7 @@ ok 1 END for pos in leading trailing; do - TESTS="$pos-repeated.test" $MAKE -e check >stdout \ + run_make TESTS="$pos-repeated.test" check >stdout \ && { cat stdout; exit 1; } cat stdout count_test_results total=2 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=1 @@ -59,8 +59,8 @@ ok 2 1..2 END -env TESTS="leading-repeated.test trailing-repeated.test" \ - $MAKE -e check >stdout && { cat stdout; exit 1; } +run_make TESTS="leading-repeated.test trailing-repeated.test" check >stdout \ + && { cat stdout; exit 1; } cat stdout count_test_results total=6 pass=3 fail=0 xpass=0 xfail=0 skip=0 error=3 grep "^ERROR: leading-repeated\\.test - multiple test plans$" stdout @@ -90,8 +90,8 @@ cat > 4.test <stdout && { cat stdout; exit 1; } +run_make TESTS="1.test 2.test 3.test 4.test" check >stdout \ + && { cat stdout; exit 1; } cat stdout count_test_results total=8 pass=0 fail=0 xpass=0 xfail=0 skip=4 error=4 for i in 1 2 3 4; do @@ -112,7 +112,7 @@ ok 4 ok 5 END -$MAKE -e check >stdout && { cat stdout; exit 1; } +run_make check >stdout && { cat stdout; exit 1; } cat stdout count_test_results total=8 pass=5 fail=0 xpass=0 xfail=0 skip=0 error=3 @@ -143,7 +143,7 @@ ok 2 ok 3 END -$MAKE -e check >stdout && { cat stdout; exit 1; } +run_make check >stdout && { cat stdout; exit 1; } cat stdout count_test_results total=5 pass=2 fail=0 xpass=0 xfail=0 skip=0 error=3 @@ -174,7 +174,7 @@ ok 4 ok 5 END -$MAKE -e check >stdout && { cat stdout; exit 1; } +run_make check >stdout && { cat stdout; exit 1; } cat stdout count_test_results total=7 pass=3 fail=0 xpass=0 xfail=0 skip=0 error=4 diff --git a/t/tap-plan-leading-zero.sh b/t/tap-plan-leading-zero.sh index 3dff53e3e..00caeb459 100644 --- a/t/tap-plan-leading-zero.sh +++ b/t/tap-plan-leading-zero.sh @@ -47,8 +47,8 @@ done >> d.test echo 1..00 > e.test echo '1..000 # SKIP' > f.test -env TESTS='a.test b.test c.test d.test e.test f.test' \ - $MAKE -e check >stdout || { cat stdout; exit 1; } +run_make TESTS='a.test b.test c.test d.test e.test f.test' check >stdout \ + || { cat stdout; exit 1; } cat stdout count_test_results total=115 pass=113 xfail=0 skip=2 fail=0 xpass=0 error=0 diff --git a/t/tap-plan-malformed.sh b/t/tap-plan-malformed.sh index 9d1f19e6c..e2dd7d02c 100644 --- a/t/tap-plan-malformed.sh +++ b/t/tap-plan-malformed.sh @@ -47,7 +47,7 @@ END tests_list=$(echo *.test) -TESTS="$tests_list" $MAKE -e check >stdout && { cat stdout; exit 1; } +run_make TESTS="$tests_list" check >stdout && { cat stdout; exit 1; } cat stdout count_test_results total=9 pass=2 fail=0 xpass=0 xfail=2 skip=0 error=5 diff --git a/t/tap-plan-middle.sh b/t/tap-plan-middle.sh index 303ece5eb..bfc473b3f 100644 --- a/t/tap-plan-middle.sh +++ b/t/tap-plan-middle.sh @@ -73,8 +73,8 @@ END tests=$(echo *.test) for tap_flags in "" "--comments"; do - env TEST_LOG_DRIVER_FLAGS="$tap_flags" TESTS="$tests" \ - $MAKE -e check >stdout || { cat stdout; exit 1; } + run_make TEST_LOG_DRIVER_FLAGS="$tap_flags" TESTS="$tests" check >stdout \ + || { cat stdout; exit 1; } cat stdout count_test_results total=12 pass=7 xfail=2 skip=3 fail=0 xpass=0 error=0 done diff --git a/t/tap-plan-whitespace.sh b/t/tap-plan-whitespace.sh index b0363c953..659a7e77a 100644 --- a/t/tap-plan-whitespace.sh +++ b/t/tap-plan-whitespace.sh @@ -32,7 +32,7 @@ cat > bar.test <stdout || { cat stdout; exit 1; } +run_make TESTS='foo.test bar.test' check >stdout || { cat stdout; exit 1; } cat stdout count_test_results total=3 pass=3 fail=0 error=0 xpass=0 xfail=0 skip=0 diff --git a/t/tap-plan.sh b/t/tap-plan.sh index 6a5332e17..50ae42605 100644 --- a/t/tap-plan.sh +++ b/t/tap-plan.sh @@ -41,8 +41,8 @@ ok END for tap_flags in "" "--comments"; do - env TEST_LOG_DRIVER_FLAGS="$tap_flags" TESTS='top.test bot.test' \ - $MAKE -e check >stdout || { cat stdout; exit 1; } + run_make TEST_LOG_DRIVER_FLAGS="$tap_flags" TESTS='top.test bot.test' \ + check >stdout || { cat stdout; exit 1; } cat stdout count_test_results total=7 pass=5 xfail=1 skip=1 fail=0 xpass=0 error=0 done diff --git a/t/tap-planskip-and-logging.sh b/t/tap-planskip-and-logging.sh index 3c4bcb502..b3089e41a 100644 --- a/t/tap-planskip-and-logging.sh +++ b/t/tap-planskip-and-logging.sh @@ -45,7 +45,7 @@ an early non-TAP line a later non-TAP line END -TESTS='foo.test foo2.test bar.test' $MAKE -e check >stdout \ +run_make TESTS='foo.test foo2.test bar.test' check >stdout \ || { cat stdout; exit 1; } cat stdout diff --git a/t/tap-planskip-case-insensitive.sh b/t/tap-planskip-case-insensitive.sh index 8dc175711..54a644e52 100644 --- a/t/tap-planskip-case-insensitive.sh +++ b/t/tap-planskip-case-insensitive.sh @@ -32,7 +32,7 @@ for c4 in p P; do echo "1..0 # $c1$c2$c3$c4 foobar" > $j.test done; done; done; done -TESTS="$(echo *.test)" $MAKE -e check >stdout || { cat stdout; exit 1; } +run_make TESTS="$(echo *.test)" check >stdout || { cat stdout; exit 1; } cat stdout count_test_results total=16 pass=0 fail=0 xpass=0 xfail=0 skip=16 error=0 diff --git a/t/tap-planskip-late.sh b/t/tap-planskip-late.sh index 69cb9e660..ab3f336f5 100644 --- a/t/tap-planskip-late.sh +++ b/t/tap-planskip-late.sh @@ -32,7 +32,7 @@ cat > bar.test <stdout || { cat stdout; exit 1; } +run_make TESTS='foo.test bar.test' check >stdout || { cat stdout; exit 1; } cat stdout grep '^SKIP: foo\.test .* from the last line$' stdout diff --git a/t/tap-planskip-unplanned-corner.sh b/t/tap-planskip-unplanned-corner.sh index 1f7e7fedc..217646995 100644 --- a/t/tap-planskip-unplanned-corner.sh +++ b/t/tap-planskip-unplanned-corner.sh @@ -32,7 +32,7 @@ ok 1 # SKIP 1..0 # SKIP END -TESTS='foo.test bar.test' $MAKE -e check >stdout && { cat stdout; exit 1; } +run_make TESTS='foo.test bar.test' check >stdout && { cat stdout; exit 1; } cat stdout count_test_results total=5 pass=0 fail=0 xpass=0 xfail=0 skip=2 error=3 diff --git a/t/tap-planskip-whitespace.sh b/t/tap-planskip-whitespace.sh index be2437bff..9513ca2ec 100644 --- a/t/tap-planskip-whitespace.sh +++ b/t/tap-planskip-whitespace.sh @@ -34,7 +34,7 @@ cat > baz.test < stdout \ +run_make TESTS='foo.test bar.test baz.test' check > stdout \ || { cat stdout; exit 1; } cat stdout diff --git a/t/tap-planskip.sh b/t/tap-planskip.sh index bc9c0fd31..d0ab69272 100644 --- a/t/tap-planskip.sh +++ b/t/tap-planskip.sh @@ -56,8 +56,8 @@ cat > mu.test <stdout || { cat stdout; exit 1; } +run_make TESTS='foo.test bar.test baz.test wget.test curl.test mu.test' \ + check >stdout || { cat stdout; exit 1; } cat stdout count_test_results total=6 pass=0 fail=0 xpass=0 xfail=0 skip=6 error=0 diff --git a/t/tap-recheck-logs.sh b/t/tap-recheck-logs.sh index 166de6e92..a4d52aae6 100644 --- a/t/tap-recheck-logs.sh +++ b/t/tap-recheck-logs.sh @@ -58,14 +58,14 @@ grep_summary () grep '^# ERROR: *1$' stdout } -$MAKE -e check && exit 1 +run_make -e FAIL check test -f foo.log test -f bar.log test -f baz.log rm -f foo.log bar.log -env RECHECK_LOGS= $MAKE -e check > stdout && { cat stdout; exit 1; } +run_make RECHECK_LOGS= check > stdout && { cat stdout; exit 1; } cat stdout test -f foo.log test -f bar.log @@ -80,7 +80,7 @@ touch foo.test # We re-run only a successful test, but the tests that failed in the # previous run should still be taken into account, and cause an overall # failure. -env RECHECK_LOGS= $MAKE -e check > stdout && { cat stdout; exit 1; } +run_make RECHECK_LOGS= check > stdout && { cat stdout; exit 1; } cat stdout grep '^PASS: foo\.test 1$' stdout grep '^PASS: foo\.test 2$' stdout @@ -90,7 +90,7 @@ grep_summary $sleep touch zardoz -env RECHECK_LOGS= $MAKE -e check > stdout && { cat stdout; exit 1; } +run_make RECHECK_LOGS= check > stdout && { cat stdout; exit 1; } cat stdout grep '^ERROR: baz\.test' stdout $EGREP '(foo|bar)\.test' stdout && exit 1 @@ -99,7 +99,7 @@ grep_summary # Now, explicitly retry with all test logs already updated, and ensure # that the summary is still displayed. -env RECHECK_LOGS= $MAKE -e check > stdout && { cat stdout; exit 1; } +run_make RECHECK_LOGS= check > stdout && { cat stdout; exit 1; } cat stdout $EGREP '(foo|bar|baz)\.test' stdout && exit 1 grep_summary @@ -107,7 +107,7 @@ grep_summary # The following should re-run foo.test (and only foo.test), even if its # log file is up-to-date. : > older -env RECHECK_LOGS=foo.log $MAKE -e check > stdout && { cat stdout; exit 1; } +run_make RECHECK_LOGS=foo.log check > stdout && { cat stdout; exit 1; } cat stdout grep '^PASS: foo\.test 1$' stdout grep '^PASS: foo\.test 2$' stdout diff --git a/t/tap-test-number-0.sh b/t/tap-test-number-0.sh index 03dc30724..a42ff548b 100644 --- a/t/tap-test-number-0.sh +++ b/t/tap-test-number-0.sh @@ -70,7 +70,7 @@ cat > e.test <stdout \ +run_make TESTS='a.test b.test c.test d.test e.test' check >stdout \ && { cat stdout; exit 1; } cat stdout diff --git a/t/tap-unplanned.sh b/t/tap-unplanned.sh index 6362335d4..11b68a32e 100644 --- a/t/tap-unplanned.sh +++ b/t/tap-unplanned.sh @@ -53,7 +53,7 @@ ok 3 not ok 4 ok 5 # SKIP END -XFAIL_TESTS=all.test $MAKE -e check >stdout && { cat stdout; exit 1; } +run_make XFAIL_TESTS=all.test check >stdout && { cat stdout; exit 1; } cat stdout count_test_results total=6 pass=0 fail=0 xpass=0 xfail=1 skip=1 error=4 grep '^ERROR: all\.test - too many tests run (expected 2, got 5)$' stdout diff --git a/t/test-driver-custom-multitest-recheck2.sh b/t/test-driver-custom-multitest-recheck2.sh index c6c0d893a..0c435de2b 100644 --- a/t/test-driver-custom-multitest-recheck2.sh +++ b/t/test-driver-custom-multitest-recheck2.sh @@ -83,7 +83,7 @@ for vpath in : false; do $srcdir/configure : Run the tests for the first time. - $MAKE check >stdout && { cat stdout; exit 1; } + run_make check >stdout && { cat stdout; exit 1; } cat stdout # All the test scripts should have run. test -f a.run @@ -95,7 +95,7 @@ for vpath in : false; do : An empty '$(TESTS)' or '$(TEST_LOGS)' means that no test should be run. for var in TESTS TEST_LOGS; do - env "$var=" $MAKE -e recheck >stdout || { cat stdout; exit 1; } + run_make "$var=" recheck >stdout || { cat stdout; exit 1; } cat stdout count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0 test ! -e a.run @@ -106,7 +106,7 @@ for vpath in : false; do : a.test was successful the first time, no need to re-run it. using_gmake || $sleep # Required by BSD make. - env TESTS=a.test $MAKE -e recheck >stdout \ + run_make TESTS=a.test recheck >stdout \ || { cat stdout; exit 1; } cat stdout count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0 @@ -117,7 +117,7 @@ for vpath in : false; do : b.test failed, it should be re-run. And make it pass this time. using_gmake || $sleep # Required by BSD make. echo OK > b.ok - TEST_LOGS=b.log $MAKE -e recheck >stdout \ + run_make TEST_LOGS=b.log recheck >stdout \ || { cat stdout; exit 1; } cat stdout test ! -e a.run @@ -129,7 +129,7 @@ for vpath in : false; do : No need to re-run a.test or b.test anymore. using_gmake || $sleep # Required by BSD make. - TEST_LOGS=b.log $MAKE -e recheck >stdout \ + run_make TEST_LOGS=b.log recheck >stdout \ || { cat stdout; exit 1; } cat stdout count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0 @@ -137,7 +137,7 @@ for vpath in : false; do test ! -e b.run test ! -e c.run using_gmake || $sleep # Required by BSD make. - TESTS='a.test b.test' $MAKE -e recheck >stdout \ + run_make TESTS='a.test b.test' recheck >stdout \ || { cat stdout; exit 1; } cat stdout count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0 @@ -149,7 +149,7 @@ for vpath in : false; do : as it contained an XPASS. And this time, make it fail with : an hard error. echo dummy > c.err - env TEST_LOGS='a.log c.log' $MAKE -e recheck >stdout \ + run_make TEST_LOGS='a.log c.log' recheck >stdout \ && { cat stdout; exit 1; } cat stdout count_test_results total=1 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=1 @@ -164,7 +164,7 @@ for vpath in : false; do # Use 'echo', not ':'; see comments above for why. using_gmake || $sleep # Required by BSD make. echo dummy > c.ok - env TESTS='c.test a.test' $MAKE -e recheck >stdout \ + run_make TESTS='c.test a.test' recheck >stdout \ || { cat stdout; exit 1; } cat stdout count_test_results total=1 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=0 @@ -177,7 +177,7 @@ for vpath in : false; do : Nothing should be rerun anymore, as all tests have been eventually : successful. using_gmake || $sleep # Required by BSD make. - $MAKE recheck >stdout || { cat stdout; exit 1; } + run_make recheck >stdout || { cat stdout; exit 1; } cat stdout count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0 test ! -e a.run diff --git a/t/test-driver-custom-multitest.sh b/t/test-driver-custom-multitest.sh index 5727af2e5..a21174a12 100644 --- a/t/test-driver-custom-multitest.sh +++ b/t/test-driver-custom-multitest.sh @@ -158,7 +158,7 @@ for vpath in : false; do grep '%% pass-xpass-fail-xfail-skip-error %%' test-suite.log test $(grep -c '%% ' test-suite.log) -eq 4 - TESTS='pass.t pass3-skip2-xfail.t' $MAKE -e check >stdout \ + run_make TESTS='pass.t pass3-skip2-xfail.t' check >stdout \ || { cat stdout; cat test-suite.log; exit 1; } cat test-suite.log cat stdout diff --git a/t/test-log.sh b/t/test-log.sh index 54b7e81c9..f0da927a0 100644 --- a/t/test-log.sh +++ b/t/test-log.sh @@ -88,7 +88,7 @@ $AUTOMAKE -a ./configure -TEST_SUITE_LOG=my.log $MAKE -e check && exit 1 +run_make -e FAIL TEST_SUITE_LOG=my.log check ls -l # For debugging. test ! -e test-suite.log test ! -e global.log @@ -130,7 +130,7 @@ have_rst_section 'XPASS: xpass' my.log have_rst_section 'ERROR: error' my.log touch error2.log test-suite.log global.log -TEST_SUITE_LOG=my.log $MAKE -e mostlyclean +run_make TEST_SUITE_LOG=my.log mostlyclean ls -l # For debugging. test ! -e my.log test ! -e pass.log diff --git a/t/test-missing.sh b/t/test-missing.sh index 0e46cf593..b3d42d929 100644 --- a/t/test-missing.sh +++ b/t/test-missing.sh @@ -44,13 +44,15 @@ grep '^PASS: ok\.test' output $FGREP 'zardoz.log' output test ! -e test-suite.log -TESTS='zardoz2.test' $MAKE -e check >output 2>&1 \ +# FIXME: this redirection is fishy... run_make needs to be enhanced +run_make TESTS='zardoz2.test' check >output 2>&1 \ && { cat output; exit 1; } cat output $FGREP 'zardoz2.log' output test ! -e test-suite.log -TEST_LOGS='zardoz3.log' $MAKE -e check >output 2>&1 \ +# FIXME: this redirection is fishy... run_make needs to be enhanced +run_make TEST_LOGS='zardoz3.log' check >output 2>&1 \ && { cat output; exit 1; } cat output $FGREP 'zardoz3.log' output diff --git a/t/test-trs-basic.sh b/t/test-trs-basic.sh index 525d5bf18..a7f77d52f 100644 --- a/t/test-trs-basic.sh +++ b/t/test-trs-basic.sh @@ -71,7 +71,7 @@ for vpath in : false; do test x"$(cat tb)" = x"foo bar sub/zardoz" rm -f tb # Please don't change the order of the stuff in TESTS, below. - TESTS='foo.test foo2.sh foo-log foolog.test a.log.b.sh 0.exe' $MAKE -e tb + run_make TESTS='foo.test foo2.sh foo-log foolog.test a.log.b.sh 0.exe' tb test x"$(cat tb)" = x"foo foo2 foo-log foolog a.log.b 0.exe" rm -f tb @@ -116,18 +116,18 @@ test -f sub/foo.trs # Try with a subset of TESTS. # -TESTS=foo.test $MAKE -e check +run_make TESTS=foo.test check test -f foo.trs test ! -e bar.trs test ! -e sub/zardoz.trs $MAKE clean test ! -e foo.trs -TESTS='foo.test bar.sh' $MAKE -e check +run_make TESTS='foo.test bar.sh' check test -f foo.trs test -f bar.trs test ! -e sub/zardoz.trs # "make clean" shouldn't remove '.trs' files for tests not in $(TESTS). -TESTS=bar.sh $MAKE -e clean +run_make TESTS=bar.sh clean test -f foo.trs test ! -e bar.trs @@ -137,19 +137,19 @@ $MAKE clean # Try with a subset of TEST_LOGS. # -TEST_LOGS=sub/zardoz.log $MAKE -e check +run_make TEST_LOGS=sub/zardoz.log check test ! -e foo.trs test ! -e bar.trs test -f sub/zardoz.trs $MAKE clean test ! -e sub/zardoz.trs -TEST_LOGS='foo.log bar.log' $MAKE -e check +run_make TEST_LOGS='foo.log bar.log' check test -f foo.trs test -f bar.trs test ! -e sub/zardoz.trs # "make clean" shouldn't remove '.trs' files for tests whose log # is not in $(TEST_LOGS). -TEST_LOGS=foo.log $MAKE -e clean +run_make TEST_LOGS=foo.log clean test ! -e foo.trs test -f bar.trs test ! -e sub/zardoz.trs diff --git a/t/test-trs-recover.sh b/t/test-trs-recover.sh index bf86bc735..d833d9621 100644 --- a/t/test-trs-recover.sh +++ b/t/test-trs-recover.sh @@ -95,14 +95,14 @@ grep '^PASS: baz\.test' stdout : Recreate with a "make check" with redefined TESTS. rm -f foo.trs bar.trs baz.trs -TESTS=foo.test $MAKE -e check +run_make TESTS=foo.test check test -f foo.trs test ! -e bar.trs test ! -e baz.trs : Recreate with a "make check" with redefined TEST_LOGS. rm -f foo.trs bar.trs baz.trs -TEST_LOGS=bar.log $MAKE -e check +run_make TEST_LOGS=bar.log check test ! -e foo.trs test -f bar.trs test ! -e baz.trs @@ -152,7 +152,7 @@ test -f baz.trs rm -f foo.trs update_stamp touch bar.test -RECHECK_LOGS= $MAKE -e check >stdout || { cat stdout; exit 1; } +run_make RECHECK_LOGS= check >stdout || { cat stdout; exit 1; } cat stdout # Check that make has updated what it needed to, but no more. test -f foo.trs diff --git a/t/test-trs-recover2.sh b/t/test-trs-recover2.sh index 6fad29089..f65096157 100644 --- a/t/test-trs-recover2.sh +++ b/t/test-trs-recover2.sh @@ -107,7 +107,7 @@ $sleep touch stamp $sleep touch bar.test -RECHECK_LOGS= $MAKE -e check >stdout || { cat stdout; exit 1; } +run_make RECHECK_LOGS= check >stdout || { cat stdout; exit 1; } cat stdout test -r foo.trs is_newest bar.trs bar.test diff --git a/t/testsuite-summary-reference-log.sh b/t/testsuite-summary-reference-log.sh index d8e49360c..2f2533fb7 100644 --- a/t/testsuite-summary-reference-log.sh +++ b/t/testsuite-summary-reference-log.sh @@ -50,7 +50,7 @@ cat stdout grep '^See \./my_test_suite\.log$' stdout mkdir bar -TEST_SUITE_LOG=bar/bar.log $MAKE -e check >stdout && { cat stdout; exit 1; } +run_make TEST_SUITE_LOG=bar/bar.log check >stdout && { cat stdout; exit 1; } cat stdout grep '^See \./bar/bar\.log$' stdout @@ -80,7 +80,7 @@ cat stdout grep '^See sub/test-suite\.log$' stdout cd .. -TEST_SUITE_LOG=foo.log $MAKE -e check >stdout && { cat stdout; exit 1; } +run_make TEST_SUITE_LOG=foo.log check >stdout && { cat stdout; exit 1; } cat stdout grep '^See sub/foo\.log$' stdout diff --git a/t/txinfo-many-output-formats-vpath.sh b/t/txinfo-many-output-formats-vpath.sh index 74b04ebc1..e31a2e1ac 100644 --- a/t/txinfo-many-output-formats-vpath.sh +++ b/t/txinfo-many-output-formats-vpath.sh @@ -118,7 +118,7 @@ test ! -e sub/main2.html test ! -e rec/main3.html # Test production of a single HTML file. -MAKEINFOFLAGS=--no-split $MAKE -e html +run_make MAKEINFOFLAGS=--no-split html test -f main.html test -f sub/main2.html test -f rec/main3.html diff --git a/t/txinfo-many-output-formats.sh b/t/txinfo-many-output-formats.sh index 9d0bd8b8f..e3eb0c9d3 100644 --- a/t/txinfo-many-output-formats.sh +++ b/t/txinfo-many-output-formats.sh @@ -118,7 +118,7 @@ test ! -e sub/main2.html test ! -e rec/main3.html # Test production of a single HTML file. -MAKEINFOFLAGS=--no-split $MAKE -e html +run_make MAKEINFOFLAGS=--no-split html test -f main.html test -f sub/main2.html test -f rec/main3.html diff --git a/t/yflags-cmdline-override.sh b/t/yflags-cmdline-override.sh index 3eea823c6..03c0483fe 100644 --- a/t/yflags-cmdline-override.sh +++ b/t/yflags-cmdline-override.sh @@ -20,8 +20,6 @@ required='cc yacc' . test-init.sh -unset YFLAGS - cat >> configure.ac <<'END' AC_PROG_CC AC_PROG_YACC @@ -36,8 +34,9 @@ foo_SOURCES = foo.y # would be useful in general, so it's probably better to be # conservative). CLEANFILES = foo.output -# Another automake wart: '-d' flag won't be given at automake time, -# so automake won't be able to generate code to clean 'foo.h' :-( +# As the '-d' flag won't be given at automake time, automake won't +# be able to generate code to clean 'foo.h'. We can't really blame +# automake for that. MAINTAINERCLEANFILES = foo.h END @@ -76,7 +75,7 @@ $MAKE maintainer-clean ls -l ./configure YFLAGS='-v' -YFLAGS=-d $MAKE -e +run_make YFLAGS=-d ls -l test -f foo.c test -f foo.h diff --git a/t/yflags.sh b/t/yflags.sh index f8fe7a407..74855161f 100644 --- a/t/yflags.sh +++ b/t/yflags.sh @@ -28,10 +28,6 @@ echo 'extern int dummy;' >> y.tab.c END chmod a+x fake-yacc -# Remove Yacc from the environment, so that it won't interfere -# with 'make -e' below. -unset YACC - cat >> configure.ac <<'END' AC_SUBST([CC], [false]) # Simulate presence of Yacc using our fake-yacc script. @@ -59,7 +55,7 @@ grep '\$(YFLAGS).*\$(AM_YFLAGS)' Makefile.in && exit 1 $AUTOCONF ./configure -env YFLAGS=__user_flags__ $MAKE -e foo.c bar-bar.c +run_make YFLAGS=__user_flags__ foo.c bar-bar.c cat foo.c cat bar-bar.c diff --git a/t/yflags2.sh b/t/yflags2.sh index 12eb5d726..1987cace9 100644 --- a/t/yflags2.sh +++ b/t/yflags2.sh @@ -28,10 +28,6 @@ echo 'extern int dummy;' >> y.tab.c END chmod a+x fake-yacc -# Remove Yacc from the environment, so that it won't interfere -# with 'make -e' below. -unset YACC - cat >> configure.ac <<'END' AC_SUBST([CXX], [false]) # Simulate presence of Yacc using our fake-yacc script. @@ -59,7 +55,7 @@ grep '\$(YFLAGS).*\$(AM_YFLAGS)' Makefile.in && exit 1 $AUTOCONF ./configure -env YFLAGS=__user_flags__ $MAKE -e foo.cc bar-bar.c++ +run_make YFLAGS=__user_flags__ foo.cc bar-bar.c++ cat foo.cc cat bar-bar.c++ -- cgit v1.2.1