summaryrefslogtreecommitdiff
path: root/Documentation/boards
Commit message (Collapse)AuthorAgeFilesLines
* ARM: remove samsung archSascha Hauer2023-03-012-101/+0
| | | | | | | | | arch/arm/mach-samsung/ hasn't seen any active maintenance or interest for a long time. Remove the architecture, boards and defconfig files Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.barebox.org/20230228135727.1602351-2-s.hauer@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Documentation: IMX: add doc for the Variscite DT8MCustomBoardMichael Kopfensteiner2023-02-271-0/+149
| | | | | | | | | | | | | This commit adds a page for the newly added Variscite board. The information about downloading the NXP firmware blobs was obtained from NXP's public U-Boot sources for the i.MX processors [1]. [1] https://github.com/nxp-imx/uboot-imx Signed-off-by: Michael Kopfensteiner <michael.kopfensteiner@vahle.com> Link: https://lore.barebox.org/20230223153601.59357-3-michael.kopfensteiner@vahle.com Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/rockchip'Sascha Hauer2023-02-231-3/+3
|\
| * Documentation: Rockchip: Update documentation to latest binariesSascha Hauer2023-01-241-3/+3
| | | | | | | | | | | | | | | | Upstream rkbin repository has been updated, update the paths in the documentation accordingly. Link: https://lore.barebox.org/20230123083511.991626-1-s.hauer@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Documentation: i.MX8M: add EVK barebox installation documentationAhmad Fatoum2023-02-213-0/+66
|/ | | | | | | | | | | | | The barebox i.MX images have a preamble that pads the i.MX header to the offset expected by the BootROM. This allows writing barebox images directly to offset 0 on SD-Cards and eMMC user area. For some i.MX8M, these images can't be directly written to eMMC boot partitions and instead require special handling. Add a note about this to the documentation. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20230217132140.2240388-1-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: stm32mp: mark iwdg2 with barebox,restart-warm-bootromAhmad Fatoum2022-10-271-1/+5
| | | | | | | | | | | | | All STM32MP1 DTs already include their respective barebox SoC header, so set barebox,restart-warm-bootrom there, so users can portably run: tamp.reboot_mode.next=serial reset -w To get into DFU mode. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20221017071000.1458292-9-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* restart: add reset -w for warm bootrom resetAhmad Fatoum2022-10-271-1/+1
| | | | | | | | | | | | | | | | | | We currently support reboot mode communication with BootROMs of the i.MX6Q/DL, i.MX8MM and STM32MP15x. For each of these, the user must take care to use the correct reset as the highest priority reset often clears the non-volatile register mapped by the syscon holding the reboot mode. As we only have one BootROM, we can improve usability by adding a global flag that describes whether a restart handler is suitable for use after a bootrom reboot mode write. Add a flag bit describing this and allow populating it from the device tree as well as from drivers. Existing i.MX/STM32 drivers will be moved onto this in follow-up commits. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20221017071000.1458292-4-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* RISC-V: add Allwinner Sun20i D1 Nezha supportMarco Felsch2022-10-071-0/+102
| | | | | | | | Add Allwinner sun20i SoC and D1-Nezha board support. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.barebox.org/20221005111214.148844-7-m.felsch@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* RISC-V: squash 64bit defconfigs into rv64i_defconfigMarco Felsch2022-10-072-5/+5
| | | | | | | | | | This commit squashes all 64bit risc-v defconfigs into one like armv8. The 32bit defconfigs are not changed since those systems have tight resource constraints and a generic defconfig may break some systems. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.barebox.org/20221005111214.148844-6-m.felsch@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Documentation: OKUD Max9331: fix sphinx warningAntony Pavlov2022-09-131-1/+1
| | | | | | | | | | | | | | | sphinx warning: Documentation/boards/mips/max9331.rst:129: WARNING: Pygments lexer name 'assembly' is not known Use pygments lexer for Gas (AT&T) assembly code, see https://pygments.org/docs/lexers/#lexers-for-assembly-languages for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Link: https://lore.barebox.org/20220912084430.84451-2-antonynpavlov@gmail.com Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: i.MX7: add 96Boards Meerkat96 supportJohannes Zink2022-07-121-0/+43
| | | | | | | | | | | | | This is a i.MX7D-based board with an upstream device tree. Add the necessary boilerplate to have barebox create an image. The memory settings are taken from U-Boot v2022.07-rc6. System reset requires pmic driver which is not available yet in barebox. Signed-off-by: Johannes Zink <j.zink@pengutronix.de> Link: https://lore.barebox.org/20220711141246.3331160-2-j.zink@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: i.MX8MP: adapt atf bl31 base addressMarco Felsch2022-07-111-4/+7
| | | | | | | | | | | | | | | | | | | | | | With i.MX8MP A1 silicon the OCRAM space is extended to 576KB whereas the pre-release silicon has only 512KB. So the upstream TF-A adapted the base address to move BL31 to the last 128KB of the OCRAM. The adaption was a bit messy because each version changed it: - v2.4 base addr = 0x960000 (original) - v2.5 base addr = 0x970000 (adapted to new silicon revision) - v2.6 base addr = 0x960000 (changed back by accident) - v2.7 base addr = 0x970000 (accident fixed) With v2.7 it is correctly set for A1 silicon onwards and we strongly recommend to use this version or newer. This commit also adapts the documentation for the i.MX8MP-EVK to reference the upstream TF-A and to point out our favorite version. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.barebox.org/20220704165256.589530-1-m.felsch@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/rpi4'Sascha Hauer2022-06-291-6/+11
|\
| * doc: bcm283x: reference newer firmwareAhmad Fatoum2022-06-171-2/+2
| | | | | | | | | | | | | | | | | | | | The old firmware can boot a Raspberry Pi 4 apparently, but it doesn't contain bcm2711 device trees, so it's probably not an actually supported configuration. Point at a newer firmware instead. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20220609055922.667016-21-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: rpi: add Raspberry Pi 4 supportAhmad Fatoum2022-06-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With basic driver support added in previous commits, add the boilerplate to have barebox-raspberry-pi.img usable as bootloader for the Raspberry Pi 4 in 64-Bit mode. Tested peripherals: - SD-Card - pinctrl - clocksource - mini-UART Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20220609055922.667016-19-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: rpi: add generic Raspberry Pi imageAhmad Fatoum2022-06-171-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new image that can be booted on all supported boards. This work by including DTs for all enabled boards in config and then consulting the mailbox interface at runtime to deduce which DT to pass to barebox proper. An alternative would have been to use the existing barebox-dt-2nd.img with a VideoCore-supplied device tree, but that has the drawback of requiring barebox to observe the same bindings as the kernel that's booted later. This approach makes migration straight-forward, because no difference in VideoCore configuration is required. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20220609055922.667016-8-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/rockchip'Sascha Hauer2022-06-291-0/+1
|\ \ | |/ |/|
| * arm: rockchip: add support for the radxa rock3 boardMichael Riesch2022-06-081-0/+1
| | | | | | | | | | | | | | | | | | Add basic support for the Radxa ROCK3 Model A board (featuring the Rockchip RK3568 SoC). Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.barebox.org/20220531162624.245664-4-michael.riesch@wolfvision.net Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: i.MX8MN: Fix script to extract firmware blobsUwe Kleine-König2022-06-091-2/+2
|/ | | | | | | | | | The directory created by extracting firmware-imx-8.12.bin is called firmware-imx-8.12, not firmware-imx-8.0. Fixes: 35d4cf996034 ("ARM: i.MX8MN: add i.MX8MN-EVK support") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.barebox.org/20220608103654.118355-1-u.kleine-koenig@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Documentation: boards: stm32mp: document USB bootstrap via DFUAhmad Fatoum2022-05-231-0/+30
| | | | | | | | | | TF-A v2.6 now supports DFU for USB bootstrap on the STM32MP1. This is normally exercised by the STM32CubeProgrammer, but is easily usable with just dfu-util as well. Document how to. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20220520111429.2716691-1-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/rpi'Sascha Hauer2022-05-191-0/+6
|\
| * ARM: configs: rpi: add and document single barebox-dt-2nd bootloaderAhmad Fatoum2022-04-251-0/+6
| | | | | | | | | | | | | | | | | | | | | | With recent rework, we can install barebox along with all supported Raspberry Pi device trees to the boot partition and let the VideoCore take core of passing the correct device tree to barebox. Enable the relevant option in config and document this briefly. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20220425062849.17954-5-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Documentation: boards: stm32mp: elaborate on how to buildAhmad Fatoum2022-05-031-1/+3
|/ | | | | | | | | | The docs only show how to configure, not how to build the configuration. Add the missing info to make this more evident. Reported-by: https://stackoverflow.com/users/18074165/fila2016 Signed-off-by: Ahmad Fatoum <ahmad@a3f.at> Link: https://lore.barebox.org/20220502065346.1804502-1-ahmad@a3f.at Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Documentation: boards: i.MX8MP-EVK: Fix typoSascha Hauer2022-04-251-1/+1
| | | | | | Fix misspelled SoC name. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: stm32mp: add board support for STM32MP135F-DKAhmad Fatoum2022-03-081-0/+1
| | | | | | | | | | | | | | We already have the needed drivers in place to support the upcoming STM32MP131. Linux already has a basic DT for the DK board. Add a barebox board that leverages it. To try it out modify the existing FIP with: fiptool update --nt-fw build/images/barebox-stm32mp-generic-bl33.img \ --hw-config build/arch/arm/dts/stm32mp135f-dk.dtb \ mmcblk0p3 Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20220221103625.3728055-2-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: stm32mp: build extra barebox-stm32mp-generic-bl33.imgAhmad Fatoum2022-02-231-7/+44
| | | | | | | | | | | | | barebox-dt-2nd.img expects being loaded at an offset, so the stack can grow down from entry point. The STM32MP TF-A default is to not have an offset. Avoid this issue by having a stm32mp specific entry point that sets up a 64 byte stack after end of barebox. As it's stm32mp-specific anyway, we can skip the early FDT parsing and ask the SDRAM controller about RAM size. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20220220124736.3052502-8-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: stm32mp: change stm32image extension to .stm32Ahmad Fatoum2022-02-231-12/+17
| | | | | | | | | | | | | | The .img extension for stm32mp1 images is unfortunate. The format is deprecated and its header makes it not directly executable and thus not suitable as-is for use in a FIP image where the BL33 is run from offset 0. To make existence of the STM32 header evident, rename the extension from .img to .stm32. As it's still supported by TF-A, have symlinks, so user build script can use the old names for now. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20220220124736.3052502-5-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/misc'Sascha Hauer2022-02-181-0/+1
|\
| * ARM: Rockchip: Add rk3568 BananaPi R2 Pro board supportFrank Wunderlich2022-02-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the BananaPi R2 Pro board. It is basicly a copy of rk3568 evb board but with slightly modified DTS. Added GPIO-Leds to dts and modified the hw-detection a bit. Tested features so far are: - 1st stage booting - Network - SD card and Emmc - usb (1.1 and 3 work, usb2 not working) - power LED (green) Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.barebox.org/20220211091354.11573-1-linux@fw-web.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/doc'Sascha Hauer2022-02-181-1/+1
|\ \
| * | Documentation: boards: openrisc: fix wrong header formatAhmad Fatoum2022-01-261-1/+1
| |/ | | | | | | | | | | | | | | Build warns that line is too short. Fix it. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20220124151827.3313412-5-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Documentation: remove some references to zbarebox.binAhmad Fatoum2022-02-071-1/+1
|/ | | | | | | | | | At least ARM doesn't generate zbarebox.bin anymore. Remove some of the left-over references. Reported-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Ahmad Fatoum <ahmad@a3f.at> Link: https://lore.barebox.org/20220205231930.2948516-1-ahmad@a3f.at Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/rockchip'Sascha Hauer2021-12-151-6/+22
|\
| * arm: rockchip: add support for the quartz64 boardMichael Riesch2021-11-171-6/+22
| | | | | | | | | | | | | | | | | | | | | | The Pine64 Quartz64 board features the Rockchip RK3566, a reduced but largely identical version of the RK3568. Two models (A and B) of the Quartz64 board are envisaged, where this patch targets the already available model A. Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Documentation/boards/riscv.rst: fix code blocksAntony Pavlov2021-11-221-2/+2
|/ | | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Link: https://lore.barebox.org/20211006223038.129681-1-antonynpavlov@gmail.com Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* scripts: Add rk-usb-loader toolSascha Hauer2021-11-101-0/+15
| | | | | | | | | This adds a tool suitable for bootstrapping barebox on Rockchip RK3568 SoCs. It has been tested on this SoC only. It might or might not work with minor adjustments on other SoCs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
* ARM: Rockchip: fix path to rkbin firmware in documentationAhmad Fatoum2021-10-121-1/+1
| | | | | | | | | | | Like in the two lines following it, the rk3568_bl31_v1.24.elf firmware's top level directory is bin/. Checked against 7d631e0d5b2d ("rk3568: bl31: update version to v1.24"). Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20211011142215.25846-1-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/zynqmp'Sascha Hauer2021-10-071-2/+2
|\
| * Documentation: boards: zynqmp: fix broken linksMichael Riesch2021-10-041-2/+2
| | | | | | | | | | | | | | | | | | The external links are not properly recognized. Remove quotation marks as a fix. Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.barebox.org/20210913121350.9307-3-michael.riesch@wolfvision.net Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/misc'Sascha Hauer2021-10-071-1/+1
|\ \
| * | scripts: socfpga_import_preloader: make sdk optionalSteffen Trumtrar2021-08-231-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | The commit a9b2e6089d82686564220013f14e9f0ffcc725e2 allowed generating everything needed in one step. This was however a bit too ambitious. The script now requires that the Altera Embedded SDK is always installed. There are situations where this is unwanted. Beef up the code a little bit to allow having the SDK as an optional argument and make the other input parameters location independent. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Link: https://lore.barebox.org/20210611080233.15141-1-s.trumtrar@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/imx'Sascha Hauer2021-10-072-0/+89
|\ \
| * | ARM: i.MX8MN: add i.MX8MN-EVK supportAhmad Fatoum2021-10-051-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With driver support in place, we can now build and run barebox in the i.MX8MN. Following tested working: - Setting up DDR4 SDRAM - Booting from SD-Card - Booting from eMMC - Updating barebox in SD-Card/eMMC boot partition - USB Fastboot, ACM gadgets - UART - Early I2C with bd71837 - Ethernet - Loading and communicating with TF-A The resulting image supports both DDR4 and LPDDR4. They use different PMICs, so probing the i2c addresses of them indicates what DRAM type to setup. I have only tested this on a DDR4 EVK, but the LPDDR4 code is equivalent to what's already used in barebox with i.MX8M Mini and Plus, so it should work(tm). Notably missing: - boot from USB SDP doesn't work. early debug_ll doesn't indicate that barebox PBL was actually entered. This can follow later though. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20211001100949.6891-9-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | ARM: i.MX8MM: add reboot to serial download modeAhmad Fatoum2021-08-091-0/+29
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i.MX8MM reference manual follows long established tradition in not documenting BootROM magic reboot codes. For older i.MX variants, the values can be seen in the bmode tables of Freescale's U-Boot patches. There are no such patches for the i.MX8M, but testing shows that mw 0x30390094 0x10 ; mw 0x30390098 0x40000000 is one of the configurations that trigger serial download on next warm reset on an i.MX8MM. Describe this in the device tree, so gpr.reboot_mode.next=serial reset -r imxwd-warm does the right thing for that SoC. This all might work for other i.MX8M variants as well, but the dtsi can be genericized later on when tested. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20210803165937.31608-2-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: AT91: migrate sama5d3-xplained to DTAhmad Fatoum2021-10-012-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have one other DT-enabled SAMA5D3 board already: microchip-ksz8477-evb, which is basically a sama5d3 xplained in different form factor and with a switch. Mimic what we do there to get rid of the sama5d3 board code. Unlike the microchip-ksz9477-evb, the barebox support for this board includes NAND, which is not yet up to date with respect to DT: - SMC for NAND configuration has no DT driver. Instead the board driver create this device - We don't support the newer NAND DT bindings (EBI). The device trees fix this up, so barebox sees the old bindings with the upstream partition layout. In future, this could be fixed. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.barebox.org/20210922065000.20970-6-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Documentation: boards: at91: remove done TODOsAhmad Fatoum2021-10-011-6/+8
|/ | | | | | | | | | | | All DT-enabled boards are now in the at91_multi_defconfig. The SAMA5 ones also generate first stage bootloaders with the same config. Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.barebox.org/20210922065000.20970-4-a.fatoum@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/zynqmp'Sascha Hauer2021-07-181-0/+40
|\
| * Documentation: zynqmp: add some documentationMichael Tretter2021-06-251-0/+40
| | | | | | | | | | | | | | | | | | Add at least some information how Barebox can be used on the ZynqMP and what is required to create a bootable image. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.barebox.org/20210624150054.1205422-8-m.tretter@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'for-next/rockchip'Sascha Hauer2021-07-181-0/+39
|\ \
| * | ARM: Rockchip: Add rk3568 evb board supportSascha Hauer2021-06-281-0/+39
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the rk3568 evb board. Tested features so far are: - 1st stage booting - Network - SD card - eMMC The dts files are based on the ones posted on the mailing lists, they should be rebased on the upstream files once they show up in barebox. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.barebox.org/20210615141641.31577-11-s.hauer@pengutronix.de Link: https://lore.barebox.org/20210621092802.27275-11-s.hauer@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
View Lorry Controller Status