diff options
Diffstat (limited to 'examples/scripts.v2/frcp')
| -rwxr-xr-x | examples/scripts.v2/frcp | 288 |
1 files changed, 0 insertions, 288 deletions
diff --git a/examples/scripts.v2/frcp b/examples/scripts.v2/frcp deleted file mode 100755 index 572aa7bc..00000000 --- a/examples/scripts.v2/frcp +++ /dev/null @@ -1,288 +0,0 @@ -#! /bin/bash -# -# original from: -# -# @(#) frcp.ksh 2.2 93/11/14 -# 92/06/29 john h. dubois iii (john@armory.com) -# 92/10/14 Cleaned up, improved, added -d and -r options -# 92/11/11 Made work with a dest of '.' -# 93/07/09 Added -l and -n options, & login as anonymous if no .netrc entry -# 93/11/14 Use either passwd or password in .netrc, since ftp does. -# -# conversion to bash v2 syntax by Chet Ramey -# -# frcp: ftp front end with rcp-like syntax. -# Note: requires any machine names given to be listed with -# user and password in .netrc. If not, anonymous FTP is -# done. -# -# full path to ftp binary -if [ -x /usr/bin/ftp ]; then - FTP=/usr/bin/ftp; -elif [ -x /usr/ucb/ftp ]; then - FTP=/usr/ucb/ftp -else - FTP=ftp -fi - -istrue() -{ - test 0 -ne "$1" -} -isfalse() -{ - test 0 -eq "$1" -} - -# For each filename given, put the filename in filename[n] -# and the machine it is on in machine[n]. -function SplitNames { - typeset file - typeset -i i=1 - - unset filename[*] machine[*] - for file; do - case "$file" in - *:*) machine[i]=${file%%:*} ;; - *) machine[i]=$LocalMach ;; - esac - filename[i]=${file#*:} - let i+=1 - done -} - -function verboseprint { - echo "$@" - echo "$@" 1>&2 -} - -function MakeDir { - OFS=$IFS - local IFS=/ dir component - - case "$1" in - /*) ;; - *) dir=. - esac - set -- $1 - IFS=$OFS - for component; do - dir=$dir/$component - if [ ! -d "$dir" ]; then - if mkdir "$dir"; then :; else - echo "Could not make directory $dir." >&2 - return 1 - fi - fi - done - return 0 -} - -lastisdot () -{ - case "$1" in - */.|*/..) return 0;; - *) return 1;; - esac -} - -# CopyFiles: issue ftp(TC) commands to copy files. -# Usage: CopyFiles [sourcemachine:]sourcepath ... [destmachine:]destpath -# Global vars: -# Uses LocalMach (should be name of local machine) -# Sets global arrs machine[]/filename[] -function CopyFiles { - unset machine[*] filename[*] - - SplitNames "$@" # split names into filename[1..n] and machine[1..n] - - local DestMach=${machine[$#]} # Machine to copy files to - local DestPath=${filename[$#]} # Destination file/dir - - unset machine[$#] filename[$#] - - [ -z "$DestPath" ] && DestPath=. # dest was given as machine: - - # Try to determine if destination should be a directory - # so that it can be forced to be a directory. - - case "$DestPath" in - */) ;; # don't add / if trailing / already present - *) if [ $# -gt 2 ] || # if more than two args given, last must be a dir - # If dest in on local machine, check whether it is a directory - [ $DestMach = $LocalMach ] && [ -d "$DestPath" ] || - # If dest ends with . or .., it is a directory - lastisdot "$DestPath" - then - DestPath=$DestPath/ - fi ;; - esac - - # If one of the above tests made us think dest is a directory, - # but it isn't, complain - case "$DestPath" in - */) if [ "$DestMach" = "$LocalMach" ] && [ ! -d "$DestPath" ]; then - echo "Destination is not a directory." 1>&2 - exit 1 - fi ;; - esac - - DoCopy "$DestMach" "$DestPath" -} - -# Usage: OpenMachine machine-name -# Emits login sequence or doesn't, depending on .netrc file and global -# variables anon and noanon -OpenMachine () -{ - local machine=$1 netrc=$HOME/.netrc user= password= - - if isfalse $anon && [ -r $netrc ]; then - set -- $(gawk ' - /machine (.* )?'"$machine"'($| )/,/^ *$/ { - Fields[$1] = $2 - if ("passwd" in Fields) - Fields["password"] = Fields["passwd"] - if ("login" in Fields && "password" in Fields) { - print Fields["login"] " " Fields["password"] - exit - } - } - ' $netrc ) - user=$1 - password=$2 - fi - if [ -z "$password" ]; then - if istrue $noanon; then - echo "No .netrc entry for machine $machine" 1>&2 - exit 1 - fi - user=anonymous - password=$USER@$LocalMach - fi - verboseprint open $machine - echo user $user "*******" 1>&2 - echo user $user $password -} - -# Usage: DoCopy destination-machine destination-path -# Copies the files in global arrs machine[]/filename[] to the given dest -# Global vars: -# Uses machine[], filename[], LocalMach, check -DoCopy () -{ - local DestMach=$1 - local DestPath=$2 - local OpenMach # Machine that connection is currently open to - local OWD=$PWD SourceMach SourceFile - local FileName - typeset -i i=1 - - while [ $i -le ${#machine[*]} ]; do - istrue $check && verboseprint "runique" - - SourceMach=${machine[i]} - SourceFile=${filename[i]} - - DestFile=$DestPath - # if DestPath is a dir, - # add source filename to it without source path - case "$DestFile" in - */) DestFile=$DestFile${SourceFile##*/} ;; - esac - - if [ $SourceMach = $LocalMach ]; then - if [ $DestMach != "$OpenMach" ]; then - OpenMachine $DestMach - OpenMach=$DestMach - fi - verboseprint put $SourceFile $DestFile - elif [ $DestMach = $LocalMach ]; then - if istrue $check && [ -f "$DestFile" ]; then - echo "$DestFile already exists." 1>&2 - continue - fi - # If destination is on local machine, - # the dest will be a full dir/filename - if istrue $createdirs; then - MakeDir "${DestFile%/*}" || continue - fi - if [ $SourceMach != "$OpenMach" ]; then - OpenMachine $SourceMach - OpenMach=$SourceMach - fi - # If source filename has wildcards ([, ], *, ?) do an mget - case "$SourceFile" in - \[*\]|*\**|*\?*) - verboseprint lcd "$DestFile" - verboseprint mget "$SourceFile" - verboseprint lcd $OWD ;; - *) verboseprint get "$SourceFile" "$DestFile" ;; - esac - else - echo "Neither source machine \"$SourceMach\" "\ -"nor destination machine \"$DestMach\" is local." 1>&2 - fi - let i+=1 - done -} - -# Start of main program -name=${0##*/} - -if [ "$1" = -h ]; then - echo \ -"$name: do ftp transfers using rcp-style parameters. -Usage: $name <source> <destpath> or $name <source> [<source> ...] <destdir> -At least one of <source> and <destpath> must be the local system. -A remote filename is given as machinename:filename -If remote filenames contain wildcards, they will be globbed on the remote -machine. Make sure they are quoted when $name is invoked. -If the invoking user's .netrc file (see ftp(TC)) contains an entry for the -remote system with a login and password supplied, $name will log in using -the given login and password. If not, $name will login in as user -anonymous and with the user@localsystem as the password. -Options: --c: check: do not overwrite files. --d: create directories as needed. --f: force: overwrite files (default). --h: print this help. --l: fail if there is no entry with login and password for the remote system, - instead of logging in as anonymous. --n: log in as anonymous even if there is an entry for the remote system in - the user's .netrc file. --r: read source/dest filename pairs from the standard input, - one pair per line, and copy files accordingly." - exit 0 -fi - -typeset -i check=0 createdirs=0 readinput=0 anon=0 noanon=0 - -while getopts :cdflnr Option -do - case "$Option" in - c) check=1;; - d) createdirs=1;; - f) check=0;; - l) noanon=1;; - n) anon=1;; - r) readinput=1;; - \?) echo "$OPTARG: invalid option."; exit 1;; - esac -done - -shift $((OPTIND-1)) - -LocalMach=`hostname` - -if istrue $readinput; then - while read line; do - CopyFiles $line - done | $FTP -nv -else - if [ $# -lt 2 ]; then - echo "$name: Not enough arguments. Use -h for help." 1>&2 - exit - fi - CopyFiles "$@" | $FTP -nv -fi |