diff options
Diffstat (limited to 'gas/doc/c-sh.texi')
| -rw-r--r-- | gas/doc/c-sh.texi | 272 |
1 files changed, 0 insertions, 272 deletions
diff --git a/gas/doc/c-sh.texi b/gas/doc/c-sh.texi deleted file mode 100644 index e20f5543788..00000000000 --- a/gas/doc/c-sh.texi +++ /dev/null @@ -1,272 +0,0 @@ -@c Copyright (C) 1991, 92, 93, 94, 95, 1997 Free Software Foundation, Inc. -@c This is part of the GAS manual. -@c For copying conditions, see the file as.texinfo. -@page -@node SH-Dependent -@chapter Hitachi SH Dependent Features - -@cindex SH support -@menu -* SH Options:: Options -* SH Syntax:: Syntax -* SH Floating Point:: Floating Point -* SH Directives:: SH Machine Directives -* SH Opcodes:: Opcodes -@end menu - -@node SH Options -@section Options - -@cindex SH options (none) -@cindex options, SH (none) -@code{@value{AS}} has no additional command-line options for the Hitachi -SH family. - -@node SH Syntax -@section Syntax - -@menu -* SH-Chars:: Special Characters -* SH-Regs:: Register Names -* SH-Addressing:: Addressing Modes -@end menu - -@node SH-Chars -@subsection Special Characters - -@cindex line comment character, SH -@cindex SH line comment character -@samp{!} is the line comment character. - -@cindex line separator, SH -@cindex statement separator, SH -@cindex SH line separator -You can use @samp{;} instead of a newline to separate statements. - -@cindex symbol names, @samp{$} in -@cindex @code{$} in symbol names -Since @samp{$} has no special meaning, you may use it in symbol names. - -@node SH-Regs -@subsection Register Names - -@cindex SH registers -@cindex registers, SH -You can use the predefined symbols @samp{r0}, @samp{r1}, @samp{r2}, -@samp{r3}, @samp{r4}, @samp{r5}, @samp{r6}, @samp{r7}, @samp{r8}, -@samp{r9}, @samp{r10}, @samp{r11}, @samp{r12}, @samp{r13}, @samp{r14}, -and @samp{r15} to refer to the SH registers. - -The SH also has these control registers: - -@table @code -@item pr -procedure register (holds return address) - -@item pc -program counter - -@item mach -@itemx macl -high and low multiply accumulator registers - -@item sr -status register - -@item gbr -global base register - -@item vbr -vector base register (for interrupt vectors) -@end table - -@node SH-Addressing -@subsection Addressing Modes - -@cindex addressing modes, SH -@cindex SH addressing modes -@code{@value{AS}} understands the following addressing modes for the SH. -@code{R@var{n}} in the following refers to any of the numbered -registers, but @emph{not} the control registers. - -@table @code -@item R@var{n} -Register direct - -@item @@R@var{n} -Register indirect - -@item @@-R@var{n} -Register indirect with pre-decrement - -@item @@R@var{n}+ -Register indirect with post-increment - -@item @@(@var{disp}, R@var{n}) -Register indirect with displacement - -@item @@(R0, R@var{n}) -Register indexed - -@item @@(@var{disp}, GBR) -@code{GBR} offset - -@item @@(R0, GBR) -GBR indexed - -@item @var{addr} -@itemx @@(@var{disp}, PC) -PC relative address (for branch or for addressing memory). The -@code{@value{AS}} implementation allows you to use the simpler form -@var{addr} anywhere a PC relative address is called for; the alternate -form is supported for compatibility with other assemblers. - -@item #@var{imm} -Immediate data -@end table - -@node SH Floating Point -@section Floating Point - -@cindex floating point, SH (@sc{ieee}) -@cindex SH floating point (@sc{ieee}) -The SH family has no hardware floating point, but the @code{.float} -directive generates @sc{ieee} floating-point numbers for compatibility -with other development tools. - -@node SH Directives -@section SH Machine Directives - -@cindex SH machine directives -@cindex machine directives, SH -@cindex @code{uaword} directive, SH -@cindex @code{ualong} directive, SH - -@table @code -@item uaword -@itemx ualong -@code{@value{AS}} will issue a warning when a misaligned @code{.word} or -@code{.long} directive is used. You may use @code{.uaword} or -@code{.ualong} to indicate that the value is intentionally misaligned. -@end table - -@node SH Opcodes -@section Opcodes - -@cindex SH opcode summary -@cindex opcode summary, SH -@cindex mnemonics, SH -@cindex instruction summary, SH -For detailed information on the SH machine instruction set, see -@cite{SH-Microcomputer User's Manual} (Hitachi Micro Systems, Inc.). - -@code{@value{AS}} implements all the standard SH opcodes. No additional -pseudo-instructions are needed on this family. Note, however, that -because @code{@value{AS}} supports a simpler form of PC-relative -addressing, you may simply write (for example) - -@example -mov.l bar,r0 -@end example - -@noindent -where other assemblers might require an explicit displacement to -@code{bar} from the program counter: - -@example -mov.l @@(@var{disp}, PC) -@end example - -@ifset SMALL -@c this table, due to the multi-col faking and hardcoded order, looks silly -@c except in smallbook. See comments below "@set SMALL" near top of this file. - -Here is a summary of SH opcodes: - -@page -@smallexample -@i{Legend:} -Rn @r{a numbered register} -Rm @r{another numbered register} -#imm @r{immediate data} -disp @r{displacement} -disp8 @r{8-bit displacement} -disp12 @r{12-bit displacement} - -add #imm,Rn lds.l @@Rn+,PR -add Rm,Rn mac.w @@Rm+,@@Rn+ -addc Rm,Rn mov #imm,Rn -addv Rm,Rn mov Rm,Rn -and #imm,R0 mov.b Rm,@@(R0,Rn) -and Rm,Rn mov.b Rm,@@-Rn -and.b #imm,@@(R0,GBR) mov.b Rm,@@Rn -bf disp8 mov.b @@(disp,Rm),R0 -bra disp12 mov.b @@(disp,GBR),R0 -bsr disp12 mov.b @@(R0,Rm),Rn -bt disp8 mov.b @@Rm+,Rn -clrmac mov.b @@Rm,Rn -clrt mov.b R0,@@(disp,Rm) -cmp/eq #imm,R0 mov.b R0,@@(disp,GBR) -cmp/eq Rm,Rn mov.l Rm,@@(disp,Rn) -cmp/ge Rm,Rn mov.l Rm,@@(R0,Rn) -cmp/gt Rm,Rn mov.l Rm,@@-Rn -cmp/hi Rm,Rn mov.l Rm,@@Rn -cmp/hs Rm,Rn mov.l @@(disp,Rn),Rm -cmp/pl Rn mov.l @@(disp,GBR),R0 -cmp/pz Rn mov.l @@(disp,PC),Rn -cmp/str Rm,Rn mov.l @@(R0,Rm),Rn -div0s Rm,Rn mov.l @@Rm+,Rn -div0u mov.l @@Rm,Rn -div1 Rm,Rn mov.l R0,@@(disp,GBR) -exts.b Rm,Rn mov.w Rm,@@(R0,Rn) -exts.w Rm,Rn mov.w Rm,@@-Rn -extu.b Rm,Rn mov.w Rm,@@Rn -extu.w Rm,Rn mov.w @@(disp,Rm),R0 -jmp @@Rn mov.w @@(disp,GBR),R0 -jsr @@Rn mov.w @@(disp,PC),Rn -ldc Rn,GBR mov.w @@(R0,Rm),Rn -ldc Rn,SR mov.w @@Rm+,Rn -ldc Rn,VBR mov.w @@Rm,Rn -ldc.l @@Rn+,GBR mov.w R0,@@(disp,Rm) -ldc.l @@Rn+,SR mov.w R0,@@(disp,GBR) -ldc.l @@Rn+,VBR mova @@(disp,PC),R0 -lds Rn,MACH movt Rn -lds Rn,MACL muls Rm,Rn -lds Rn,PR mulu Rm,Rn -lds.l @@Rn+,MACH neg Rm,Rn -lds.l @@Rn+,MACL negc Rm,Rn -@page -nop stc VBR,Rn -not Rm,Rn stc.l GBR,@@-Rn -or #imm,R0 stc.l SR,@@-Rn -or Rm,Rn stc.l VBR,@@-Rn -or.b #imm,@@(R0,GBR) sts MACH,Rn -rotcl Rn sts MACL,Rn -rotcr Rn sts PR,Rn -rotl Rn sts.l MACH,@@-Rn -rotr Rn sts.l MACL,@@-Rn -rte sts.l PR,@@-Rn -rts sub Rm,Rn -sett subc Rm,Rn -shal Rn subv Rm,Rn -shar Rn swap.b Rm,Rn -shll Rn swap.w Rm,Rn -shll16 Rn tas.b @@Rn -shll2 Rn trapa #imm -shll8 Rn tst #imm,R0 -shlr Rn tst Rm,Rn -shlr16 Rn tst.b #imm,@@(R0,GBR) -shlr2 Rn xor #imm,R0 -shlr8 Rn xor Rm,Rn -sleep xor.b #imm,@@(R0,GBR) -stc GBR,Rn xtrct Rm,Rn -stc SR,Rn -@end smallexample -@end ifset - -@ifset Hitachi-all -@ifclear GENERIC -@raisesections -@end ifclear -@end ifset - |