diff options
Diffstat (limited to 'gas/testsuite/gas/hppa/unsorted/unsorted.exp')
| -rw-r--r-- | gas/testsuite/gas/hppa/unsorted/unsorted.exp | 258 |
1 files changed, 0 insertions, 258 deletions
diff --git a/gas/testsuite/gas/hppa/unsorted/unsorted.exp b/gas/testsuite/gas/hppa/unsorted/unsorted.exp deleted file mode 100644 index 31300c70b2f..00000000000 --- a/gas/testsuite/gas/hppa/unsorted/unsorted.exp +++ /dev/null @@ -1,258 +0,0 @@ -# Copyright (C) 1993, 1997 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# Please email any bugs, comments, and/or additions to this file to: -# DejaGnu@cygnus.com - -# Written by the Center for Software Science at the University of Utah -# and by Cygnus Support. - -proc do_subspace_align_test {} { - set testname "ss_align.s: Test subspace alignment (part 2)" - set x 0 - - if [gas_test_old "ss_align.s" "" "subspace alignment (part 1)"] then { - objdump_start_no_subdir "a.out" "-h" - - # Check the headers for the correct alignment value for the - # .data section (elf) or the $DATA$ subspace (som). - if [istarget hppa*-*-*elf*] then { - while 1 { - expect { - -re "data\[^\n\]* 2..6\[^\n\]*\n" { set x 1 } - -re "\[^\n\]*\n" { } - timeout { perror "timeout\n"; break } - eof { break } - } - } - } else { - while 1 { - expect { - -re "DATA\[^\n\]* 2..6\[^\n\]*\n" { set x 1 } - -re "\[^\n\]*\n" { } - timeout { perror "timeout\n"; break } - eof { break } - } - } - } - - # This was intended to do any cleanup necessary. It kinda looks like it - # isn't needed, but just in case, please keep it in for now. - objdump_finish - - # Did we find what we were looking for? If not, flunk it. - if [expr $x==1] then { pass $testname } else { fail $testname } - } -} - -proc do_local_label_test {} { - set testname "locallabel.s: Elimination of local labels (part 2)" - set x 0 - - if [gas_test_old "locallabel.s" "" "Elimination of local labels (part1)"] { - objdump_start_no_subdir "a.out" "-t" - - while 1 { - expect { - -re "^00000000\[^\n\]*Label\[^\n\]*\n" { set x 1 } - -re "^00000000\[^\n\]*L\$01234\[^\n\]*\n" { set x 0 } - -re "\[^\n\]*\n" { } - timeout { perror "timeout\n"; break } - eof { break } - } - } - - # This was intended to do any cleanup necessary. It kinda looks like it - # isn't needed, but just in case, please keep it in for now. - objdump_finish - - # Did we find what we were looking for? If not, flunk it. - if [expr $x==1] then { pass $testname } else { fail $testname } - } -} - -proc do_frchain_test {} { - set testname "fragbug.s: Test bug in frag chaining (part 2)" - set x 0 - - if [gas_test_old "fragbug.s" "" "Test bug in frag chaining (part1)"] { - objdump_start_no_subdir "a.out" "--prefix-addresses -d" - - while 1 { - expect { - -re "^0x00000000\[^\n\]*nop\[^\n\]*\n" { set x 1 } - -re "^0x00000004\[^\n\]*nop\[^\n\]*\n" { set x 0 } - -re "\[^\n\]*\n" { } - timeout { perror "timeout\n"; break } - eof { break } - } - } - - # This was intended to do any cleanup necessary. It kinda looks like it - # isn't needed, but just in case, please keep it in for now. - objdump_finish - - # Did we find what we were looking for? If not, flunk it. - if [expr $x==1] then { pass $testname } else { fail $testname } - } -} - -proc do_align3_test {} { - set testname "align3.s: Test for alignment bug when switching subspaces (part2)" - set x 0 - - if [gas_test_old "align3.s" "" "Test for alignment bug when switching subspaces (part1)"] { - objdump_start_no_subdir "a.out" "--prefix-addresses -d" - - while 1 { - expect { - -re "\[^\n\]* <main> nop\[^\n\]*\n" { set x 1 } - -re "\[^\n\]* <.*end_main> nop\[^\n\]*\n" { set x 1 } - -re "\[^\n\]* <main+.*> nop\[^\n\]*\n" { set x 0 } - -re "\[^\n\]*\n" { } - timeout { perror "timeout\n"; break } - eof { break } - } - } - - # This was intended to do any cleanup necessary. It kinda looks like it - # isn't needed, but just in case, please keep it in for now. - objdump_finish - - # Did we find what we were looking for? If not, flunk it. - if [expr $x==1] then { pass $testname } else { fail $testname } - } -} - -proc do_align4_test {} { - set testname "align4.s: More subspace alignment tests (part2)" - set x 0 - - if [istarget hppa*-*-*elf*] then { - return - } - - if [gas_test_old "align4.s" "" "More subspace alignment tests (part1)"] { - objdump_start_no_subdir "a.out" "-h" - - while 1 { - expect { - -re "\[^\n\]*MILLICODE\[^\n\]*2..6\[^\n\]*\n" - { set x [expr $x+1] } - -re "\[^\n\]*YABBA\[^\n\]*2..3\[^\n\]*\n" - { set x [expr $x+1] } - timeout { perror "timeout\n"; break } - eof { break } - } - } - - # This was intended to do any cleanup necessary. It kinda looks like it - # isn't needed, but just in case, please keep it in for now. - objdump_finish - - # Did we find what we were looking for? If not, flunk it. - if [expr $x==2] then { pass $testname } else { fail $testname } - } -} - -proc do_import_test {} { - set testname "importbug.s: Test for bug in .import directive (part2)" - set x 0 - - if [gas_test_old "importbug.s" "" "Test for bug in .import directive (part1)"] { - objdump_start_no_subdir "a.out" "--syms" - - while 1 { - expect { - -re "\[^\n\]*.DATA..foo\[^\n\]*\n" { set x 1 } - -re "\[^\n\]*.data.*foo\[^\n\]*\n" { set x 1 } - -re "\[^\n\]*\n" { } - timeout { perror "timeout\n"; break } - eof { break } - } - } - - # This was intended to do any cleanup necessary. It kinda looks like it - # isn't needed, but just in case, please keep it in for now. - objdump_finish - - # Did we find what we were looking for? If not, flunk it. - if [expr $x==1] then { pass $testname } else { fail $testname } - } -} - -proc do_common_test {} { - set testname "common.s: Test for bug in .comm handling (part2)" - set x 0 - - if [gas_test_old "common.s" "" "Test for bug in .comm handling (part1)"] { - objdump_start_no_subdir "a.out" "--syms" - - while 1 { - expect { - -re "\[^\n\]*.COM.*common_symbol\[^\n\]*\n" { set x 1 } - -re "\[^\n\]*\n" { } - timeout { perror "timeout\n"; break } - eof { break } - } - } - - # This was intended to do any cleanup necessary. It kinda looks like it - # isn't needed, but just in case, please keep it in for now. - objdump_finish - - # Did we find what we were looking for? If not, flunk it. - if [expr $x==1] then { pass $testname } else { fail $testname } - } -} - -if [istarget hppa*-*-*] then { - # Make sure subspace alignment requests from the subspace directives - # are honored - do_subspace_align_test - - # Make sure the correct labels end up in the symbol table - do_local_label_test - - # GAS-1.36 choked on this file. - gas_test "labeldiffs.s" "" "" "Difference of labels" - - # Test a recent bug where frag chaining wasn't working correctly. - do_frchain_test - - # Test bug where switching between subspaces creates bogus alignments - do_align3_test - - # Test bug where switching between subspaces creates bogus alignments - do_align4_test - - # Test a problem where $global$ is defined, then used within the - # same source file. - setup_xfail hppa*-*-* - gas_test "globalbug.s" "" "" "Use \$global\$ in file which defines it" - - # Test that importing a defined symbol doesn't screw up the symbol's - # space/subspace. - do_import_test - - # Test for a buglet in the handling of common symbols - do_common_test - - # Test for an off-by-2 bug in range check for conditional branches - gas_test_error "brlenbug.s" "" "Check for error(s) in branch length" - -} - |