diff options
Diffstat (limited to 'ld/testsuite/ld-undefined/undefined.exp')
| -rw-r--r-- | ld/testsuite/ld-undefined/undefined.exp | 256 |
1 files changed, 158 insertions, 98 deletions
diff --git a/ld/testsuite/ld-undefined/undefined.exp b/ld/testsuite/ld-undefined/undefined.exp index a9ba9bb83e0..c0c9012e750 100644 --- a/ld/testsuite/ld-undefined/undefined.exp +++ b/ld/testsuite/ld-undefined/undefined.exp @@ -29,119 +29,179 @@ if { ![is_remote host] && [which $CC] == 0 } { untested $testund untested $testfn untested $testline - return -} - -if ![ld_compile "$CC -g" $srcdir/$subdir/undefined.c tmpdir/undefined.o] { +} elseif { ![ld_compile "$CC -g" $srcdir/$subdir/undefined.c tmpdir/undefined.o] } { verbose "Unable to compile test file!" 1 unresolved $testund unresolved $testfn unresolved $testline - return -} +} else { + remote_file host delete "tmpdir/undefined" -remote_file host delete "tmpdir/undefined" + set flags [big_or_little_endian] -set flags [big_or_little_endian] + # Using -e start prevents the SunOS linker from trying to build a + # shared library. + send_log "$ld -e start $flags -o tmpdir/undefined tmpdir/undefined.o\n" + set exec_output [run_host_cmd "$ld" "-e start $flags -o tmpdir/undefined tmpdir/undefined.o"] -# Using -e start prevents the SunOS linker from trying to build a -# shared library. -send_log "$ld -e start $flags -o tmpdir/undefined tmpdir/undefined.o\n" -set exec_output [run_host_cmd "$ld" "-e start $flags -o tmpdir/undefined tmpdir/undefined.o"] + send_log "$exec_output\n" + verbose "$exec_output" -send_log "$exec_output\n" -verbose "$exec_output" + proc checkund { string testname } { + global exec_output -proc checkund { string testname } { - global exec_output - - if [string match "*$string*" $exec_output] { - pass $testname - } else { - fail $testname + if [string match "*$string*" $exec_output] { + pass $testname + } else { + fail $testname + } } -} -set mu "undefined reference to `*this_function_is_not_defined'" -checkund $mu $testund + set mu "undefined reference to `*this_function_is_not_defined'" + checkund $mu $testund -# ARM PE defaults to using stabs debugging, which we can't handle for -# a COFF file. -#setup_xfail "arm*-*-pe*" + # ARM PE defaults to using stabs debugging, which we can't handle + # for a COFF file. + #setup_xfail "arm*-*-pe*" -# For Xtensa on GNU Linux systems (or any other system where PIC code is -# always used), the address of the undefined function is in a literal pool -# outside the function, so that both the "undefined function" and "undefined -# line" tests fail. -setup_xfail xtensa*-*-linux* + # For Xtensa on GNU Linux systems (or any other system where PIC + # code is always used), the address of the undefined function is + # in a literal pool outside the function, so that both the + # "undefined function" and "undefined line" tests fail. + setup_xfail xtensa*-*-linux* -set mf "tmpdir/undefined.o* In function `function':" -checkund $mf $testfn + set mf "tmpdir/undefined.o* In function `function':" + checkund $mf $testfn -if ![is_elf_format] { - # COFF SH gets this test wrong--it reports line 10, because although - # the jump is at line 9, the function address, and the reloc, is - # stored at the end of the function. - setup_xfail "sh-*-*" + if ![is_elf_format] { + # COFF SH gets this test wrong--it reports line 10, because + # although the jump is at line 9, the function address, and + # the reloc, is stored at the end of the function. + setup_xfail "sh-*-*" - # ARM PE defaults to using stabs debugging, which we can't handle for - # a COFF file. - #setup_xfail "arm*-*-pe*" + # ARM PE defaults to using stabs debugging, which we can't + # handle for a COFF file. + #setup_xfail "arm*-*-pe*" + } + + set ml "undefined.c:9: undefined reference to `*this_function_is_not_defined'" + # With targets that use elf/dwarf2, such as the arm-elf toolchain, + # the code in bfd/elf.c:_bfd_elf_find_nearest_line() is called in + # order to locate the file name/line number where the undefined + # reference occurs. Unfortunately this tries to use the dwarf2 + # debug information held in the .debug_info section. This section + # contains a series of comp_unit structures, each of which has a + # low/high address range representing the span of memory locations + # covered by that structure. The structures also index into other + # structures held in the .debug_line section and together they can + # translate memory locations back into file/function/line number + # addresses in the source code. Since the information about the + # memory region covered by a comp_unit is only determined at link + # time, the low/high addresses in the .debug_info section and the + # line addresses in the .debug_line section are computed by + # generating relocs against known symbols in the object code. + # + # When the undefined reference is detected, the relocs in the + # dwarf2 debug sections have not yet been resolved, so the + # low/high addresses and the line number address are all set at + # zero. Thus when _bfd_elf_find_nearest_line() calls + # _bfd_dwarf2_find_nearest_line() no comp_unit can be found which + # actually covers the address where the reference occurred, and so + # _bfd_elf_find_nearest_line() fails. + # + # The upshot of all of this, is that the error message reported by + # the linker, instead of having a source file name & line number + # as in: + # + # undefined.c:9: undefined reference to `this_function_is_not_defined' + # + # has an object file & section address instead: + # + # undefined.0(.text+0xc): undefined reference to `this_function_is_not_defined' + # + # hence the xfails below. + + setup_xfail mcore-*-elf + setup_xfail mep-*-* + setup_xfail mips-sgi-irix6* + setup_xfail "sh64-*-*" + # Fails for the MSP430 because it uses SYM_DIFF relocs but it does + # not provide a special_function for handling them. If + # optimization is enabled then this test passes because + # function()'s prologue is eliminated. + setup_xfail "msp430-*-*" + + # The undefined test fails on 31 bit s/390 because the address of + # the function `this_function_is_not_defined' is stored in the + # literal pool of the function. Therefore the line number in the + # error message is 8 instead of 9. On 64 bit s/390 this works + # because of the new brasl instruction that doesn't need a literal + # pool entry. + setup_xfail s390-*-* + + # See comments above for Xtensa. + setup_xfail xtensa*-*-linux* + setup_xfail hppa*64*-*-* + + checkund $ml $testline } -set ml "undefined.c:9: undefined reference to `*this_function_is_not_defined'" -# With targets that use elf/dwarf2, such as the arm-elf -# toolchain, the code in bfd/elf.c:_bfd_elf_find_nearest_line() is called -# in order to locate the file name/line number where the undefined -# reference occurs. Unfortunately this tries to use the dwarf2 debug -# information held in the .debug_info section. This section contains a series -# of comp_unit structures, each of which has a low/high address range -# representing the span of memory locations covered by that structure. The -# structures also index into other structures held in the .debug_line section -# and together they can translate memory locations back into file/function/line -# number addresses in the source code. Since the information about the memory -# region covered by a comp_unit is only determined at link time, the low/high -# addresses in the .debug_info section and the line addresses in the .debug_line -# section are computed by generating relocs against known symbols in the object -# code. -# -# When the undefined reference is detected, the relocs in the dwarf2 -# debug sections have not yet been resolved, so the low/high addresses and the -# line number address are all set at zero. Thus when _bfd_elf_find_nearest_line() -# calls _bfd_dwarf2_find_nearest_line() no comp_unit can be found which -# actually covers the address where the reference occurred, and so -# _bfd_elf_find_nearest_line() fails. -# -# The upshot of all of this, is that the error message reported by the -# linker, instead of having a source file name & line number as in: -# -# undefined.c:9: undefined reference to `this_function_is_not_defined' -# -# has an object file & section address instead: -# -# undefined.0(.text+0xc): undefined reference to `this_function_is_not_defined' -# -# hence the xfails below. - -setup_xfail mcore-*-elf -setup_xfail mep-*-* -setup_xfail mips-sgi-irix6* -setup_xfail "sh64-*-*" -# Fails for the MSP430 because it uses SYM_DIFF relocs but it does -# not provide a special_function for handling them. If optimization -# is enabled then this test passes because function()'s prologue is -# eliminated. -setup_xfail "msp430-*-*" - -# The undefined test fails on 31 bit s/390 because the address of the -# function `this_function_is_not_defined' is stored in the literal pool of -# the function. Therefore the line number in the error message is 8 instead -# of 9. On 64 bit s/390 this works because of the new brasl instruction that -# doesn't need a literal pool entry. -setup_xfail s390-*-* - -# See comments above for Xtensa. -setup_xfail xtensa*-*-linux* -setup_xfail hppa*64*-*-* - -checkund $ml $testline +# Undefined symbols should become dynamic when linking a shared lib. +set testname "undefined symbols in shared lib" + +set asflags "" +switch -glob $target_triplet { + aarch64* - + arm* - + powerpc64* { set asflags "--defsym BL=1" } + powerpc* { set asflags "--defsym BLPLT=1" } + hppa* { set asflags "--defsym HPPA=1" } + i\[3-7\]86* - + x86_64* { set asflags "--defsym CALLPLT=1" } +} + +if { ![is_elf_format] || ![check_shared_lib_support]} then { + unsupported $testname +} elseif {![ld_assemble $as "$asflags $srcdir/$subdir/fundef.s" \ + tmpdir/fundef.o]} then { + fail $testname +} elseif {![ld_link $ld tmpdir/fundef.so \ + "-shared --allow-shlib-undefined tmpdir/fundef.o"]} then { + setup_xfail tic6x-*-* + fail $testname +} else { + if {![is_remote host] && [which $nm] == 0} then { + unresolved "$testname (dyn sym)" + } else { + set exec_output [run_host_cmd "$nm" "-D tmpdir/fundef.so"] + set exec_output [prune_warnings $exec_output] + + if { ($asflags == "" + || ([regexp ".* undef_fun_typed.*" $exec_output] + && [regexp ".* undef_fun_notype.*" $exec_output])) + && [regexp ".* undef_data.*" $exec_output] + && [regexp ".* undef_pfun.*" $exec_output] + && [regexp ".* undef_notype.*" $exec_output]} then { + pass "$testname (dyn sym)" + } else { + fail "$testname (dyn sym)" + } + } + + global READELF + if {![is_remote host] && [which $READELF] == 0} then { + unresolved "$testname (dyn reloc)" + } else { + set exec_output [run_host_cmd "$READELF" "-r tmpdir/fundef.so"] + set exec_output [prune_warnings $exec_output] + + # we ought to get two .rel{a}.plt and three .rel{a}.dyn relocs + if { ($asflags == "" || [regexp ".* contains 2 .*" $exec_output]) + && [regexp ".* contains 3 .*" $exec_output] + && ![regexp "_NONE" $exec_output]} then { + pass "$testname (dyn reloc)" + } else { + fail "$testname (dyn reloc)" + } + } +} |