diff options
Diffstat (limited to 'opcodes/configure')
| -rwxr-xr-x | opcodes/configure | 761 |
1 files changed, 348 insertions, 413 deletions
diff --git a/opcodes/configure b/opcodes/configure index bbfa207606..1b30f7e056 100755 --- a/opcodes/configure +++ b/opcodes/configure @@ -1,7 +1,7 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.13.1 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -26,6 +26,8 @@ ac_help="$ac_help ac_help="$ac_help --enable-commonbfdlib build shared BFD/opcodes/libiberty library" ac_help="$ac_help + --enable-build-warnings Enable build-time compiler warnings if gcc is used" +ac_help="$ac_help --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer" ac_help="$ac_help @@ -49,6 +51,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -163,6 +166,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -333,6 +337,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -354,7 +363,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.13.1" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -498,12 +507,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -514,7 +527,7 @@ done if test -r "$cache_file"; then echo "loading cache $cache_file" - test -f "$cache_file" && . $cache_file + . $cache_file else echo "creating cache $cache_file" > $cache_file @@ -558,130 +571,9 @@ done if test -z "$ac_aux_dir"; then { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. - - -echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:568: checking host system type" >&5 -if test "x$ac_cv_host" = "x" || (test "x$host" != "xNONE" && test "x$host" != "x$ac_cv_host_alias"); then - -# Make sure we can run config.sub. - if $ac_config_sub sun4 >/dev/null 2>&1; then : - else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } - fi - - ac_cv_host_alias=$host - case "$ac_cv_host_alias" in - NONE) - case $nonopt in - NONE) - if ac_cv_host_alias=`$ac_config_guess`; then : - else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } - fi ;; - *) ac_cv_host_alias=$nonopt ;; - esac ;; - esac - - ac_cv_host=`$ac_config_sub $ac_cv_host_alias` - ac_cv_host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` - ac_cv_host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` - ac_cv_host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -else - echo $ac_n "(cached) $ac_c" 1>&6 -fi - -echo "$ac_t""$ac_cv_host" 1>&6 - -host=$ac_cv_host -host_alias=$ac_cv_host_alias -host_cpu=$ac_cv_host_cpu -host_vendor=$ac_cv_host_vendor -host_os=$ac_cv_host_os - - - - - -echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:609: checking target system type" >&5 -if test "x$ac_cv_target" = "x" || (test "x$target" != "xNONE" && test "x$target" != "x$ac_cv_target_alias"); then - -# Make sure we can run config.sub. - if $ac_config_sub sun4 >/dev/null 2>&1; then : - else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } - fi - - ac_cv_target_alias=$target - case "$ac_cv_target_alias" in - NONE) - case $nonopt in - NONE) - ac_cv_target_alias=$host_alias ;; - - *) ac_cv_target_alias=$nonopt ;; - esac ;; - esac - - ac_cv_target=`$ac_config_sub $ac_cv_target_alias` - ac_cv_target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` - ac_cv_target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` - ac_cv_target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -else - echo $ac_n "(cached) $ac_c" 1>&6 -fi - -echo "$ac_t""$ac_cv_target" 1>&6 - -target=$ac_cv_target -target_alias=$ac_cv_target_alias -target_cpu=$ac_cv_target_cpu -target_vendor=$ac_cv_target_vendor -target_os=$ac_cv_target_os - - - - - -echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:649: checking build system type" >&5 -if test "x$ac_cv_build" = "x" || (test "x$build" != "xNONE" && test "x$build" != "x$ac_cv_build_alias"); then - -# Make sure we can run config.sub. - if $ac_config_sub sun4 >/dev/null 2>&1; then : - else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } - fi - - ac_cv_build_alias=$build - case "$ac_cv_build_alias" in - NONE) - case $nonopt in - NONE) - ac_cv_build_alias=$host_alias ;; - - *) ac_cv_build_alias=$nonopt ;; - esac ;; - esac - - ac_cv_build=`$ac_config_sub $ac_cv_build_alias` - ac_cv_build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` - ac_cv_build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` - ac_cv_build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -else - echo $ac_n "(cached) $ac_c" 1>&6 -fi - -echo "$ac_t""$ac_cv_build" 1>&6 - -build=$ac_cv_build -build_alias=$ac_cv_build_alias -build_cpu=$ac_cv_build_cpu -build_vendor=$ac_cv_build_vendor -build_os=$ac_cv_build_os - - - +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # Do some error checking and defaulting for the host and target type. @@ -704,6 +596,69 @@ NONE---*---* | *---NONE---* | *---*---NONE) ;; *) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; esac + +# Make sure we can run config.sub. +if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 +echo "configure:607: checking host system type" >&5 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + +echo $ac_n "checking target system type""... $ac_c" 1>&6 +echo "configure:628: checking target system type" >&5 + +target_alias=$target +case "$target_alias" in +NONE) + case $nonopt in + NONE) target_alias=$host_alias ;; + *) target_alias=$nonopt ;; + esac ;; +esac + +target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` +target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$target" 1>&6 + +echo $ac_n "checking build system type""... $ac_c" 1>&6 +echo "configure:646: checking build system type" >&5 + +build_alias=$build +case "$build_alias" in +NONE) + case $nonopt in + NONE) build_alias=$host_alias ;; + *) build_alias=$nonopt ;; + esac ;; +esac + +build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` +build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$build" 1>&6 + test "$host_alias" != "$target_alias" && test "$program_prefix$program_suffix$program_transform_name" = \ NONENONEs,x,x, && @@ -712,8 +667,8 @@ test "$host_alias" != "$target_alias" && # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:716: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then +echo "configure:671: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then @@ -742,8 +697,8 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:746: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then +echo "configure:701: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then @@ -789,12 +744,12 @@ fi if test -z "$CC"; then case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN*) + *win32* | *WIN32*) # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:797: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then +echo "configure:752: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then @@ -824,8 +779,8 @@ fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:829: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5 +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:784: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -836,12 +791,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 840 "configure" +#line 795 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:845: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:800: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -866,14 +821,14 @@ echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:871: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:826: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:876: checking whether we are using GNU C" >&5 -if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then +echo "configure:831: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.c <<EOF @@ -881,7 +836,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:885: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:840: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -900,8 +855,8 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:904: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then +echo "configure:859: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c @@ -932,7 +887,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:936: checking for POSIXized ISC" >&5 +echo "configure:891: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -970,9 +925,9 @@ BFD_VERSION=`grep INIT_AUTOMAKE ${srcdir}/../bfd/configure.in | sed -n -e 's/[ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:974: checking for a BSD compatible install" >&5 +echo "configure:929: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then -if eval "test \"\${ac_cv_path_install+set}\" = set"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" @@ -990,10 +945,6 @@ else grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : - elif test $ac_prog = install && - grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : else ac_cv_path_install="$ac_dir/$ac_prog -c" break 2 @@ -1022,12 +973,12 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:1031: checking whether build environment is sane" >&5 +echo "configure:982: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -1075,18 +1026,18 @@ EOF_SED rm -f conftestsed fi test "$program_prefix" != NONE && - program_transform_name="s,^,${program_prefix},;$program_transform_name" + program_transform_name="s,^,${program_prefix},; $program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && - program_transform_name="s,\$\$,${program_suffix},;$program_transform_name" + program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" # sed with no file args requires a program. test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:1088: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:1039: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then +if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftestmake <<\EOF @@ -1130,7 +1081,7 @@ EOF missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:1134: checking for working aclocal" >&5 +echo "configure:1085: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1143,7 +1094,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:1147: checking for working autoconf" >&5 +echo "configure:1098: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1156,7 +1107,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:1160: checking for working automake" >&5 +echo "configure:1111: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1169,7 +1120,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:1173: checking for working autoheader" >&5 +echo "configure:1124: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1182,7 +1133,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:1186: checking for working makeinfo" >&5 +echo "configure:1137: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1205,8 +1156,8 @@ fi # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1209: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_prog_AR+set}\" = set"; then +echo "configure:1160: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$AR"; then @@ -1237,8 +1188,8 @@ fi # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1241: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then +echo "configure:1192: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then @@ -1269,8 +1220,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1273: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then +echo "configure:1224: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then @@ -1375,8 +1326,8 @@ fi # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1379: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then +echo "configure:1330: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then @@ -1414,7 +1365,7 @@ ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 -echo "configure:1418: checking for ld used by GCC" >&5 +echo "configure:1369: checking for ld used by GCC" >&5 ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in # Accept absolute paths. @@ -1438,12 +1389,12 @@ echo "configure:1418: checking for ld used by GCC" >&5 esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 -echo "configure:1442: checking for GNU ld" >&5 +echo "configure:1393: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 -echo "configure:1445: checking for non-GNU ld" >&5 +echo "configure:1396: checking for non-GNU ld" >&5 fi -if eval "test \"\${ac_cv_path_LD+set}\" = set"; then +if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -z "$LD"; then @@ -1476,8 +1427,8 @@ else fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 -echo "configure:1480: checking if the linker ($LD) is GNU ld" >&5 -if eval "test \"\${ac_cv_prog_gnu_ld+set}\" = set"; then +echo "configure:1431: checking if the linker ($LD) is GNU ld" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. @@ -1492,8 +1443,8 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 -echo "configure:1496: checking for BSD-compatible nm" >&5 -if eval "test \"\${ac_cv_path_NM+set}\" = set"; then +echo "configure:1447: checking for BSD-compatible nm" >&5 +if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$NM"; then @@ -1528,8 +1479,8 @@ NM="$ac_cv_path_NM" echo "$ac_t""$NM" 1>&6 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1532: checking whether ln -s works" >&5 -if eval "test \"\${ac_cv_prog_LN_S+set}\" = set"; then +echo "configure:1483: checking whether ln -s works" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftestdata @@ -1577,8 +1528,8 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" case "$lt_target" in *-*-irix6*) # Find out which ABI we are using. - echo '#line 1581 "configure"' > conftest.$ac_ext - if { (eval echo configure:1582: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + echo '#line 1532 "configure"' > conftest.$ac_ext + if { (eval echo configure:1533: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" @@ -1599,19 +1550,19 @@ case "$lt_target" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 -echo "configure:1603: checking whether the C compiler needs -belf" >&5 -if eval "test \"\${lt_cv_cc_needs_belf+set}\" = set"; then +echo "configure:1554: checking whether the C compiler needs -belf" >&5 +if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1608 "configure" +#line 1559 "configure" #include "confdefs.h" int main() { ; return 0; } EOF -if { (eval echo configure:1615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1566: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_needs_belf=yes else @@ -1695,7 +1646,7 @@ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ # Reload cache, that may have been modified by ltconfig if test -r "$cache_file"; then echo "loading cache $cache_file" - test -f "$cache_file" && . $cache_file + . $cache_file else echo "creating cache $cache_file" > $cache_file @@ -1733,6 +1684,29 @@ if test "${enable_commonbfdlib+set}" = set; then esac fi +build_warnings="-W -Wall" +# Check whether --enable-build-warnings or --disable-build-warnings was given. +if test "${enable_build_warnings+set}" = set; then + enableval="$enable_build_warnings" + case "${enableval}" in + yes) ;; + no) build_warnings="-w";; + ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"` + build_warnings="${build_warnings} ${t}";; + *,) t=`echo "${enableval}" | sed -e "s/,/ /g"` + build_warnings="${t} ${build_warnings}";; + *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; +esac +if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then + echo "Setting warning flags = $build_warnings" 6>&1 +fi +fi +WARN_CFLAGS="" +if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then + WARN_CFLAGS="${build_warnings}" +fi + + @@ -1751,17 +1725,17 @@ EOF_SED rm -f conftestsed fi test "$program_prefix" != NONE && - program_transform_name="s,^,${program_prefix},;$program_transform_name" + program_transform_name="s,^,${program_prefix},; $program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && - program_transform_name="s,\$\$,${program_suffix},;$program_transform_name" + program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" # sed with no file args requires a program. test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:1765: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:1739: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -1784,12 +1758,12 @@ fi echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:1788: checking for Cygwin environment" >&5 -if eval "test \"\${ac_cv_cygwin+set}\" = set"; then +echo "configure:1762: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1793 "configure" +#line 1767 "configure" #include "confdefs.h" int main() { @@ -1800,7 +1774,7 @@ int main() { return __CYGWIN__; ; return 0; } EOF -if { (eval echo configure:1804: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1778: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -1810,25 +1784,26 @@ else ac_cv_cygwin=no fi rm -f conftest* +rm -f conftest* fi echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:1820: checking for mingw32 environment" >&5 -if eval "test \"\${ac_cv_mingw32+set}\" = set"; then +echo "configure:1795: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1825 "configure" +#line 1800 "configure" #include "confdefs.h" int main() { return __MINGW32__; ; return 0; } EOF -if { (eval echo configure:1832: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1807: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -1838,57 +1813,29 @@ else ac_cv_mingw32=no fi rm -f conftest* +rm -f conftest* fi echo "$ac_t""$ac_cv_mingw32" 1>&6 MINGW32= test "$ac_cv_mingw32" = yes && MINGW32=yes -echo $ac_n "checking for EMX OS/2 environment""... $ac_c" 1>&6 -echo "configure:1848: checking for EMX OS/2 environment" >&5 -if eval "test \"\${ac_cv_emxos2+set}\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1853 "configure" -#include "confdefs.h" - -int main() { -return __EMX__; -; return 0; } -EOF -if { (eval echo configure:1860: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_emxos2=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_emxos2=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_emxos2" 1>&6 -EMXOS2= -test "$ac_cv_emxos2" = yes && EMXOS2=yes - echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1879: checking for executable suffix" >&5 -if eval "test \"\${ac_cv_exeext+set}\" = set"; then +echo "configure:1826: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN" = yes || test "$MINGW32" = yes || test "$EMXOS2" = yes; then + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then ac_cv_exeext=.exe else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:1889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:1836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in - *.c | *.C | *.o | *.obj | *.xcoff) ;; + *.c | *.o | *.obj | *.ilk | *.pdb) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done @@ -1911,8 +1858,8 @@ ac_exeext=$EXEEXT # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1915: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then +echo "configure:1862: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then @@ -1941,8 +1888,8 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1945: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then +echo "configure:1892: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then @@ -1988,12 +1935,12 @@ fi if test -z "$CC"; then case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN*) + *win32* | *WIN32*) # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1996: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then +echo "configure:1943: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then @@ -2023,8 +1970,8 @@ fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:2028: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5 +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:1975: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -2035,12 +1982,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 2039 "configure" +#line 1986 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:2044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1991: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -2065,14 +2012,14 @@ echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:2070: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:2017: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:2075: checking whether we are using GNU C" >&5 -if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then +echo "configure:2022: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.c <<EOF @@ -2080,7 +2027,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2031: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -2099,8 +2046,8 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:2103: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then +echo "configure:2050: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c @@ -2133,13 +2080,13 @@ fi ALL_LINGUAS= echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:2137: checking how to run the C preprocessor" >&5 +echo "configure:2084: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then -if eval "test \"\${ac_cv_prog_CPP+set}\" = set"; then +if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # This must be in double quotes, not single quotes, because CPP may get @@ -2148,13 +2095,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 2152 "configure" +#line 2099 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2158: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2165,13 +2112,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 2169 "configure" +#line 2116 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2175: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2122: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2182,13 +2129,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 2186 "configure" +#line 2133 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2192: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2139: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2213,12 +2160,12 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:2217: checking for ANSI C header files" >&5 -if eval "test \"\${ac_cv_header_stdc+set}\" = set"; then +echo "configure:2164: checking for ANSI C header files" >&5 +if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2222 "configure" +#line 2169 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -2226,7 +2173,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2230: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2177: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2243,7 +2190,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 2247 "configure" +#line 2194 "configure" #include "confdefs.h" #include <string.h> EOF @@ -2261,7 +2208,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 2265 "configure" +#line 2212 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -2282,7 +2229,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 2286 "configure" +#line 2233 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -2293,7 +2240,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:2297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2244: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -2317,12 +2264,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:2321: checking for working const" >&5 -if eval "test \"\${ac_cv_c_const+set}\" = set"; then +echo "configure:2268: checking for working const" >&5 +if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2326 "configure" +#line 2273 "configure" #include "confdefs.h" int main() { @@ -2371,7 +2318,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:2375: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2322: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -2392,21 +2339,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:2396: checking for inline" >&5 -if eval "test \"\${ac_cv_c_inline+set}\" = set"; then +echo "configure:2343: checking for inline" >&5 +if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 2403 "configure" +#line 2350 "configure" #include "confdefs.h" int main() { -} $ac_kw int foo() { +} $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:2410: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2357: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -2432,12 +2379,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:2436: checking for off_t" >&5 -if eval "test \"\${ac_cv_type_off_t+set}\" = set"; then +echo "configure:2383: checking for off_t" >&5 +if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2441 "configure" +#line 2388 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -2448,31 +2395,29 @@ EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* - eval "ac_cv_type_off_t=yes" + ac_cv_type_off_t=yes else rm -rf conftest* - eval "ac_cv_type_off_t=no" + ac_cv_type_off_t=no fi rm -f conftest* fi -if eval "test \"`echo '$ac_cv_type_'off_t`\" = yes"; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 - cat >> confdefs.h <<EOF +echo "$ac_t""$ac_cv_type_off_t" 1>&6 +if test $ac_cv_type_off_t = no; then + cat >> confdefs.h <<\EOF #define off_t long EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:2471: checking for size_t" >&5 -if eval "test \"\${ac_cv_type_size_t+set}\" = set"; then +echo "configure:2416: checking for size_t" >&5 +if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2476 "configure" +#line 2421 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -2483,19 +2428,17 @@ EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* - eval "ac_cv_type_size_t=yes" + ac_cv_type_size_t=yes else rm -rf conftest* - eval "ac_cv_type_size_t=no" + ac_cv_type_size_t=no fi rm -f conftest* fi -if eval "test \"`echo '$ac_cv_type_'size_t`\" = yes"; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 - cat >> confdefs.h <<EOF +echo "$ac_t""$ac_cv_type_size_t" 1>&6 +if test $ac_cv_type_size_t = no; then + cat >> confdefs.h <<\EOF #define size_t unsigned EOF @@ -2504,19 +2447,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:2508: checking for working alloca.h" >&5 -if eval "test \"\${ac_cv_header_alloca_h+set}\" = set"; then +echo "configure:2451: checking for working alloca.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2513 "configure" +#line 2456 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:2520: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2463: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -2537,12 +2480,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:2541: checking for alloca" >&5 -if eval "test \"\${ac_cv_func_alloca_works+set}\" = set"; then +echo "configure:2484: checking for alloca" >&5 +if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2546 "configure" +#line 2489 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -2570,7 +2513,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:2574: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -2602,12 +2545,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:2606: checking whether alloca needs Cray hooks" >&5 -if eval "test \"\${ac_cv_os_cray+set}\" = set"; then +echo "configure:2549: checking whether alloca needs Cray hooks" >&5 +if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2611 "configure" +#line 2554 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -2632,12 +2575,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2636: checking for $ac_func" >&5 -if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then +echo "configure:2579: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2641 "configure" +#line 2584 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2646,7 +2589,6 @@ else /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); -char (*f)(); int main() { @@ -2656,12 +2598,12 @@ int main() { #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -f = $ac_func; +$ac_func(); #endif ; return 0; } EOF -if { (eval echo configure:2665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2688,15 +2630,15 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:2692: checking stack direction for C alloca" >&5 -if eval "test \"\${ac_cv_c_stack_direction+set}\" = set"; then +echo "configure:2634: checking stack direction for C alloca" >&5 +if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 2700 "configure" +#line 2642 "configure" #include "confdefs.h" find_stack_direction () { @@ -2715,7 +2657,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:2719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -2740,17 +2682,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2744: checking for $ac_hdr" >&5 -if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then +echo "configure:2686: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2749 "configure" +#line 2691 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2754: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2696: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2779,12 +2721,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2783: checking for $ac_func" >&5 -if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then +echo "configure:2725: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2788 "configure" +#line 2730 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2793,7 +2735,6 @@ else /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); -char (*f)(); int main() { @@ -2803,12 +2744,12 @@ int main() { #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -f = $ac_func; +$ac_func(); #endif ; return 0; } EOF -if { (eval echo configure:2812: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2833,15 +2774,15 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:2837: checking for working mmap" >&5 -if eval "test \"\${ac_cv_func_mmap_fixed_mapped+set}\" = set"; then +echo "configure:2778: checking for working mmap" >&5 +if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 2845 "configure" +#line 2786 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -2981,7 +2922,7 @@ main() } EOF -if { (eval echo configure:2985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2926: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -3009,17 +2950,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3013: checking for $ac_hdr" >&5 -if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then +echo "configure:2954: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3018 "configure" +#line 2959 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3023: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3049,12 +2990,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3053: checking for $ac_func" >&5 -if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then +echo "configure:2994: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3058 "configure" +#line 2999 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3063,7 +3004,6 @@ else /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); -char (*f)(); int main() { @@ -3073,12 +3013,12 @@ int main() { #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -f = $ac_func; +$ac_func(); #endif ; return 0; } EOF -if { (eval echo configure:3082: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3022: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3107,12 +3047,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3111: checking for $ac_func" >&5 -if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then +echo "configure:3051: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3116 "configure" +#line 3056 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3121,7 +3061,6 @@ else /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); -char (*f)(); int main() { @@ -3131,12 +3070,12 @@ int main() { #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -f = $ac_func; +$ac_func(); #endif ; return 0; } EOF -if { (eval echo configure:3140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3079: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3170,19 +3109,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:3174: checking for LC_MESSAGES" >&5 -if eval "test \"\${am_cv_val_LC_MESSAGES+set}\" = set"; then +echo "configure:3113: checking for LC_MESSAGES" >&5 +if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3179 "configure" +#line 3118 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:3186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -3203,7 +3142,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:3207: checking whether NLS is requested" >&5 +echo "configure:3146: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -3223,7 +3162,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:3227: checking whether included gettext is requested" >&5 +echo "configure:3166: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -3242,17 +3181,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:3246: checking for libintl.h" >&5 -if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then +echo "configure:3185: checking for libintl.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3251 "configure" +#line 3190 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3256: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3195: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3269,19 +3208,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:3273: checking for gettext in libc" >&5 -if eval "test \"\${gt_cv_func_gettext_libc+set}\" = set"; then +echo "configure:3212: checking for gettext in libc" >&5 +if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3278 "configure" +#line 3217 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:3285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3224: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -3297,15 +3236,15 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:3301: checking for bindtextdomain in -lintl" >&5 -ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-:%__p__%'` -if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then +echo "configure:3240: checking for bindtextdomain in -lintl" >&5 +ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3309 "configure" +#line 3248 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3316,7 +3255,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:3320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3332,19 +3271,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:3336: checking for gettext in libintl" >&5 -if eval "test \"\${gt_cv_func_gettext_libintl+set}\" = set"; then +echo "configure:3275: checking for gettext in libintl" >&5 +if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3341 "configure" +#line 3280 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:3348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3287: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -3372,8 +3311,8 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3376: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then +echo "configure:3315: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$MSGFMT" in @@ -3406,12 +3345,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3410: checking for $ac_func" >&5 -if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then +echo "configure:3349: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3415 "configure" +#line 3354 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3420,7 +3359,6 @@ else /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); -char (*f)(); int main() { @@ -3430,12 +3368,12 @@ int main() { #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -f = $ac_func; +$ac_func(); #endif ; return 0; } EOF -if { (eval echo configure:3439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3462,8 +3400,8 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3466: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then +echo "configure:3404: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$GMSGFMT" in @@ -3498,8 +3436,8 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3502: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then +echo "configure:3440: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$XGETTEXT" in @@ -3530,7 +3468,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 3534 "configure" +#line 3472 "configure" #include "confdefs.h" int main() { @@ -3538,7 +3476,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:3542: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -3570,8 +3508,8 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3574: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then +echo "configure:3512: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$MSGFMT" in @@ -3604,8 +3542,8 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3608: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then +echo "configure:3546: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$GMSGFMT" in @@ -3640,8 +3578,8 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3644: checking for $ac_word" >&5 -if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then +echo "configure:3582: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$XGETTEXT" in @@ -3730,7 +3668,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:3734: checking for catalogs to be installed" >&5 +echo "configure:3672: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -3758,17 +3696,17 @@ echo "configure:3734: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:3762: checking for linux/version.h" >&5 -if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then +echo "configure:3700: checking for linux/version.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3767 "configure" +#line 3705 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3772: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3710: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3845,9 +3783,9 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:3849: checking for a BSD compatible install" >&5 +echo "configure:3787: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then -if eval "test \"\${ac_cv_path_install+set}\" = set"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" @@ -3865,10 +3803,6 @@ else grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : - elif test $ac_prog = install && - grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : else ac_cv_path_install="$ac_dir/$ac_prog -c" break 2 @@ -3897,7 +3831,7 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -3906,17 +3840,17 @@ for ac_hdr in string.h strings.h stdlib.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3910: checking for $ac_hdr" >&5 -if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then +echo "configure:3844: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3915 "configure" +#line 3849 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3920: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3854: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4176,7 +4110,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.13.1" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -4250,6 +4184,7 @@ s%@AR@%$AR%g s%@RANLIB@%$RANLIB%g s%@LN_S@%$LN_S%g s%@LIBTOOL@%$LIBTOOL%g +s%@WARN_CFLAGS@%$WARN_CFLAGS%g s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g s%@MAINT@%$MAINT%g @@ -4500,5 +4435,5 @@ exit 0 EOF chmod +x $CONFIG_STATUS rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || $SHELL $CONFIG_STATUS || exit 1 +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 |