From 986bc2ac05bc4c08c6a0ed30c9e97674932ccfeb Mon Sep 17 00:00:00 2001 From: Lorry Tar Creator Date: Mon, 1 Apr 2013 14:07:52 +0000 Subject: Imported from /home/lorry/working-area/delta_bmake-tarball/bmake.tar.gz. --- PSD.doc/Makefile | 8 + PSD.doc/tutorial.ms | 3773 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 3781 insertions(+) create mode 100644 PSD.doc/Makefile create mode 100644 PSD.doc/tutorial.ms (limited to 'PSD.doc') diff --git a/PSD.doc/Makefile b/PSD.doc/Makefile new file mode 100644 index 0000000..8e1f1fa --- /dev/null +++ b/PSD.doc/Makefile @@ -0,0 +1,8 @@ +# $NetBSD: Makefile,v 1.2 1995/06/14 15:20:23 christos Exp $ +# @(#)Makefile 8.1 (Berkeley) 8/14/93 + +DIR= psd/12.make +SRCS= tutorial.ms +MACROS= -ms + +.include diff --git a/PSD.doc/tutorial.ms b/PSD.doc/tutorial.ms new file mode 100644 index 0000000..c1a6444 --- /dev/null +++ b/PSD.doc/tutorial.ms @@ -0,0 +1,3773 @@ +.\" $NetBSD: tutorial.ms,v 1.11 2011/08/18 15:19:30 sjg Exp $ +.\" Copyright (c) 1988, 1989, 1993 +.\" The Regents of the University of California. All rights reserved. +.\" +.\" This code is derived from software contributed to Berkeley by +.\" Adam de Boor. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 3. Neither the name of the University nor the names of its contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" Copyright (c) 1988, 1989 by Adam de Boor +.\" Copyright (c) 1989 by Berkeley Softworks +.\" +.\" This code is derived from software contributed to Berkeley by +.\" Adam de Boor. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 3. All advertising materials mentioning features or use of this software +.\" must display the following acknowledgement: +.\" This product includes software developed by the University of +.\" California, Berkeley and its contributors. +.\" 4. Neither the name of the University nor the names of its contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" @(#)tutorial.ms 8.1 (Berkeley) 8/18/93 +.\" +.EH 'PSD:12-%''PMake \*- A Tutorial' +.OH 'PMake \*- A Tutorial''PSD:12-%' +.\" xH is a macro to provide numbered headers that are automatically stuffed +.\" into a table-of-contents, properly indented, etc. If the first argument +.\" is numeric, it is taken as the depth for numbering (as for .NH), else +.\" the default (1) is assumed. +.\" +.\" @P The initial paragraph distance. +.\" @Q The piece of section number to increment (or 0 if none given) +.\" @R Section header. +.\" @S Indent for toc entry +.\" @T Argument to NH (can't use @Q b/c giving 0 to NH resets the counter) +.de xH +.NH \\$1 +\\$2 \\$3 \\$4 \\$5 \\$6 \\$7 \\$8 \\$9 +.nr PD .1v +.XS \\n% +.ta 0.6i +\\*(SN \\$2 \\$3 \\$4 \\$5 \\$6 \\$7 \\$8 \\$9 +.XE +.nr PD .3v +.. +.\" CW is used to place a string in fixed-width or switch to a +.\" fixed-width font. +.\" C is a typewriter font for a laserwriter. Use something else if +.\" you don't have one... +.de CW +.ie !\\n(.$ .ft C +.el \&\\$3\fC\\$1\fP\\$2 +.. +.\" Anything I put in a display I want to be in fixed-width +.am DS +.CW +.. +.\" The stuff in .No produces a little stop sign in the left margin +.\" that says NOTE in it. Unfortunately, it does cause a break, but +.\" hey. Can't have everything. In case you're wondering how I came +.\" up with such weird commands, they came from running grn on a +.\" gremlin file... +.de No +.br +.ne 0.5i +.po -0.5i +.br +.mk +.nr g3 \\n(.f +.nr g4 \\n(.s +.sp -1 +.\" .st cf +\D't 5u' +.sp -1 +\h'50u' +.sp -1 +\D't 3u' +.sp -1 +.sp 7u +\h'53u' +\d\D'p -0.19i 0.0i 0.0i -0.13i 0.30i 0.0i 0.0i 0.13i' +.sp -1 +.ft R +.ps 6 +.nr g8 \\n(.d +.ds g9 "NOTE +.sp 74u +\h'85u'\v'0.85n'\h-\w\\*(g9u/2u\&\\*(g9 +.sp |\\n(g8u +.sp 166u +\D't 3u' +.br +.po +.rt +.ft \\n(g3 +.ps \\n(g4 +.. +.de Bp +.ie !\\n(.$ .IP \(bu 2 +.el .IP "\&" 2 +.. +.po +.3i +.TL +PMake \*- A Tutorial +.AU +Adam de Boor +.AI +Berkeley Softworks +2150 Shattuck Ave, Penthouse +Berkeley, CA 94704 +adam@bsw.uu.net +\&...!uunet!bsw!adam +.FS +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appears in all copies. +The University of California, Berkeley Softworks, and Adam de Boor make no +representations about the suitability of this software for any +purpose. It is provided "as is" without express or implied warranty. +.FE +.PP +.xH 1 Introduction +.LP +PMake is a program for creating other programs, or anything else you +can think of for it to do. The basic idea behind PMake is that, for +any given system, be it a program or a document or whatever, there +will be some files that depend on the state of other files (on when +they were last modified). PMake takes these dependencies, which you +must specify, and uses them to build whatever it is you want it to +build. +.LP +PMake is almost fully-compatible with Make, with which you may already +be familiar. PMake's most important feature is its ability to run +several different jobs at once, making the creation of systems +considerably faster. It also has a great deal more functionality than +Make. Throughout the text, whenever something is mentioned that is an +important difference between PMake and Make (i.e. something that will +cause a makefile to fail if you don't do something about it), or is +simply important, it will be flagged with a little sign in the left +margin, like this: +.No +.LP +This tutorial is divided into three main sections corresponding to basic, +intermediate and advanced PMake usage. If you already know Make well, +you will only need to skim chapter 2 (there are some aspects of +PMake that I consider basic to its use that didn't exist in Make). +Things in chapter 3 make life much easier, while those in chapter 4 +are strictly for those who know what they are doing. Chapter 5 has +definitions for the jargon I use and chapter 6 contains possible +solutions to the problems presented throughout the tutorial. +.xH 1 The Basics of PMake +.LP +PMake takes as input a file that tells a) which files depend on which +other files to be complete and b) what to do about files that are +``out-of-date.'' This file is known as a ``makefile'' and is usually +.Ix 0 def makefile +kept in the top-most directory of the system to be built. While you +can call the makefile anything you want, PMake will look for +.CW Makefile +and +.CW makefile +(in that order) in the current directory if you don't tell it +otherwise. +.Ix 0 def makefile default +To specify a different makefile, use the +.B \-f +flag (e.g. +.CW "pmake -f program.mk" ''). `` +.Ix 0 ref flags -f +.Ix 0 ref makefile other +.LP +A makefile has four different types of lines in it: +.RS +.IP \(bu 2 +File dependency specifications +.IP \(bu 2 +Creation commands +.IP \(bu 2 +Variable assignments +.IP \(bu 2 +Comments, include statements and conditional directives +.RE +.LP +Any line may be continued over multiple lines by ending it with a +backslash. +.Ix 0 def "continuation line" +The backslash, following newline and any initial whitespace +on the following line are compressed into a single space before the +input line is examined by PMake. +.xH 2 Dependency Lines +.LP +As mentioned in the introduction, in any system, there are +dependencies between the files that make up the system. For instance, +in a program made up of several C source files and one header file, +the C files will need to be re-compiled should the header file be +changed. For a document of several chapters and one macro file, the +chapters will need to be reprocessed if any of the macros changes. +.Ix 0 def "dependency" +These are dependencies and are specified by means of dependency lines in +the makefile. +.LP +.Ix 0 def "dependency line" +On a dependency line, there are targets and sources, separated by a +one- or two-character operator. +The targets ``depend'' on the sources and are usually created from +them. +.Ix 0 def target +.Ix 0 def source +.Ix 0 ref operator +Any number of targets and sources may be specified on a dependency line. +All the targets in the line are made to depend on all the sources. +Targets and sources need not be actual files, but every source must be +either an actual file or another target in the makefile. +If you run out of room, use a backslash at the end of the line to continue onto +the next one. +.LP +Any file may be a target and any file may be a source, but the +relationship between the two (or however many) is determined by the +``operator'' that separates them. +.Ix 0 def operator +Three types of operators exist: one specifies that the datedness of a +target is determined by the state of its sources, while another +specifies other files (the sources) that need to be dealt with before +the target can be re-created. The third operator is very similar to +the first, with the additional condition that the target is +out-of-date if it has no sources. These operations are represented by +the colon, the exclamation point and the double-colon, respectively, and are +mutually exclusive. Their exact semantics are as follows: +.IP ":" +.Ix 0 def operator colon +.Ix 0 def : +If a colon is used, a target on the line is considered to be +``out-of-date'' (and in need of creation) if +.RS +.IP \(bu 2 +any of the sources has been modified more recently than the target, or +.IP \(bu 2 +the target doesn't exist. +.RE +.Ix 0 def out-of-date +.IP "\&" +Under this operation, steps will be taken to re-create the target only +if it is found to be out-of-date by using these two rules. +.IP "!" +.Ix 0 def operator force +.Ix 0 def ! +If an exclamation point is used, the target will always be re-created, +but this will not happen until all of its sources have been examined +and re-created, if necessary. +.IP "::" +.Ix 0 def operator double-colon +.Ix 0 def :: +If a double-colon is used, a target is out-of-date if: +.RS +.IP \(bu 2 +any of the sources has been modified more recently than the target, or +.IP \(bu 2 +the target doesn't exist, or +.IP \(bu 2 +the target has no sources. +.RE +.IP "\&" +If the target is out-of-date according to these rules, it will be re-created. +This operator also does something else to the targets, but I'll go +into that in the next section (``Shell Commands''). +.LP +Enough words, now for an example. Take that C program I mentioned +earlier. Say there are three C files +.CW a.c , ( +.CW b.c +and +.CW c.c ) +each of which +includes the file +.CW defs.h . +The dependencies between the files could then be expressed as follows: +.DS +program : a.o b.o c.o +a.o b.o c.o : defs.h +a.o : a.c +b.o : b.c +c.o : c.c +.DE +.LP +You may be wondering at this point, where +.CW a.o , +.CW b.o +and +.CW c.o +came in and why +.I they +depend on +.CW defs.h +and the C files don't. The reason is quite simple: +.CW program +cannot be made by linking together .c files \*- it must be +made from .o files. Likewise, if you change +.CW defs.h , +it isn't the .c files that need to be re-created, it's the .o files. +If you think of dependencies in these terms \*- which files (targets) +need to be created from which files (sources) \*- you should have no problems. +.LP +An important thing to notice about the above example, is that all the +\&.o files appear as targets on more than one line. This is perfectly +all right: the target is made to depend on all the sources mentioned +on all the dependency lines. E.g. +.CW a.o +depends on both +.CW defs.h +and +.CW a.c . +.Ix 0 ref dependency +.No +.LP +The order of the dependency lines in the makefile is +important: the first target on the first dependency line in the +makefile will be the one that gets made if you don't say otherwise. +That's why +.CW program +comes first in the example makefile, above. +.LP +Both targets and sources may contain the standard C-Shell wildcard +characters +.CW { , ( +.CW } , +.CW * , +.CW ? , +.CW [ , +and +.CW ] ), +but the non-curly-brace ones may only appear in the final component +(the file portion) of the target or source. The characters mean the +following things: +.IP \fB{}\fP +These enclose a comma-separated list of options and cause the pattern +to be expanded once for each element of the list. Each expansion +contains a different element. For example, +.CW src/{whiffle,beep,fish}.c +expands to the three words +.CW src/whiffle.c , +.CW src/beep.c , +and +.CW src/fish.c . +These braces may be nested and, unlike the other wildcard characters, +the resulting words need not be actual files. All other wildcard +characters are expanded using the files that exist when PMake is +started. +.IP \fB*\fP +This matches zero or more characters of any sort. +.CW src/*.c +will expand to the same three words as above as long as +.CW src +contains those three files (and no other files that end in +.CW .c ). +.IP \fB?\fP +Matches any single character. +.IP \fB[]\fP +This is known as a character class and contains either a list of +single characters, or a series of character ranges +.CW a-z , ( +for example means all characters between a and z), or both. It matches +any single character contained in the list. E.g. +.CW [A-Za-z] +will match all letters, while +.CW [0123456789] +will match all numbers. +.xH 2 Shell Commands +.LP +``Isn't that nice,'' you say to yourself, ``but how are files +actually `re-created,' as he likes to spell it?'' +The re-creation is accomplished by commands you place in the makefile. +These commands are passed to the Bourne shell (better known as +``/bin/sh'') to be executed and are +.Ix 0 ref shell +.Ix 0 ref re-creation +.Ix 0 ref update +expected to do what's necessary to update the target file (PMake +doesn't actually check to see if the target was created. It just +assumes it's there). +.Ix 0 ref target +.LP +Shell commands in a makefile look a lot like shell commands you would +type at a terminal, with one important exception: each command in a +makefile +.I must +be preceded by at least one tab. +.LP +Each target has associated with it a shell script made up of +one or more of these shell commands. The creation script for a target +should immediately follow the dependency line for that target. While +any given target may appear on more than one dependency line, only one +of these dependency lines may be followed by a creation script, unless +the `::' operator was used on the dependency line. +.Ix 0 ref operator double-colon +.Ix 0 ref :: +.No +.LP +If the double-colon was used, each dependency line for the target +may be followed by a shell script. That script will only be executed +if the target on the associated dependency line is out-of-date with +respect to the sources on that line, according to the rules I gave +earlier. +I'll give you a good example of this later on. +.LP +To expand on the earlier makefile, you might add commands as follows: +.DS +program : a.o b.o c.o + cc a.o b.o c.o \-o program +a.o b.o c.o : defs.h +a.o : a.c + cc \-c a.c +b.o : b.c + cc \-c b.c +c.o : c.c + cc \-c c.c +.DE +.LP +Something you should remember when writing a makefile is, the +commands will be executed if the +.I target +on the dependency line is out-of-date, not the sources. +.Ix 0 ref target +.Ix 0 ref source +.Ix 0 ref out-of-date +In this example, the command +.CW "cc \-c a.c" '' `` +will be executed if +.CW a.o +is out-of-date. Because of the `:' operator, +.Ix 0 ref : +.Ix 0 ref operator colon +this means that should +.CW a.c +.I or +.CW defs.h +have been modified more recently than +.CW a.o , +the command will be executed +.CW a.o "\&" ( +will be considered out-of-date). +.Ix 0 ref out-of-date +.LP +Remember how I said the only difference between a makefile shell +command and a regular shell command was the leading tab? I lied. There +is another way in which makefile commands differ from regular ones. +The first two characters after the initial whitespace are treated +specially. +If they are any combination of `@' and `\-', they cause PMake to do +different things. +.LP +In most cases, shell commands are printed before they're +actually executed. This is to keep you informed of what's going on. If +an `@' appears, however, this echoing is suppressed. In the case of an +.CW echo +command, say +.CW "echo Linking index" ,'' `` +it would be +rather silly to see +.DS +echo Linking index +Linking index +.DE +.LP +so PMake allows you to place an `@' before the command +.CW "@echo Linking index" '') (`` +to prevent the command from being printed. +.LP +The other special character is the `\-'. In case you didn't know, +shell commands finish with a certain ``exit status.'' This status is +made available by the operating system to whatever program invoked the +command. Normally this status will be 0 if everything went ok and +non-zero if something went wrong. For this reason, PMake will consider +an error to have occurred if one of the shells it invokes returns a non-zero +status. When it detects an error, PMake's usual action is to abort +whatever it's doing and exit with a non-zero status itself (any other +targets that were being created will continue being made, but nothing +new will be started. PMake will exit after the last job finishes). +This behavior can be altered, however, by placing a `\-' at the front +of a command +.CW "\-mv index index.old" ''), (`` +certain command-line arguments, +or doing other things, to be detailed later. In such +a case, the non-zero status is simply ignored and PMake keeps chugging +along. +.No +.LP +Because all the commands are given to a single shell to execute, such +things as setting shell variables, changing directories, etc., last +beyond the command in which they are found. This also allows shell +compound commands (like +.CW for +loops) to be entered in a natural manner. +Since this could cause problems for some makefiles that depend on +each command being executed by a single shell, PMake has a +.B \-B +.Ix 0 ref compatibility +.Ix 0 ref flags -B +flag (it stands for backwards-compatible) that forces each command to +be given to a separate shell. It also does several other things, all +of which I discourage since they are now old-fashioned.\|.\|.\|. +.No +.LP +A target's shell script is fed to the shell on its (the shell's) input stream. +This means that any commands, such as +.CW ci +that need to get input from the terminal won't work right \*- they'll +get the shell's input, something they probably won't find to their +liking. A simple way around this is to give a command like this: +.DS +ci $(SRCS) < /dev/tty +.DE +This would force the program's input to come from the terminal. If you +can't do this for some reason, your only other alternative is to use +PMake in its fullest compatibility mode. See +.B Compatibility +in chapter 4. +.Ix 0 ref compatibility +.LP +.xH 2 Variables +.LP +PMake, like Make before it, has the ability to save text in variables +to be recalled later at your convenience. Variables in PMake are used +much like variables in the shell and, by tradition, consist of +all upper-case letters (you don't +.I have +to use all upper-case letters. +In fact there's nothing to stop you from calling a variable +.CW @^&$%$ . +Just tradition). Variables are assigned-to using lines of the form +.Ix 0 def variable assignment +.DS +VARIABLE = value +.DE +.Ix 0 def variable assignment +appended-to by +.DS +VARIABLE += value +.DE +.Ix 0 def variable appending +.Ix 0 def variable assignment appended +.Ix 0 def += +conditionally assigned-to (if the variable isn't already defined) by +.DS +VARIABLE ?= value +.DE +.Ix 0 def variable assignment conditional +.Ix 0 def ?= +and assigned-to with expansion (i.e. the value is expanded (see below) +before being assigned to the variable\*-useful for placing a value at +the beginning of a variable, or other things) by +.DS +VARIABLE := value +.DE +.Ix 0 def variable assignment expanded +.Ix 0 def := +.LP +Any whitespace before +.I value +is stripped off. When appending, a space is placed between the old +value and the stuff being appended. +.LP +The final way a variable may be assigned to is using +.DS +VARIABLE != shell-command +.DE +.Ix 0 def variable assignment shell-output +.Ix 0 def != +In this case, +.I shell-command +has all its variables expanded (see below) and is passed off to a +shell to execute. The output of the shell is then placed in the +variable. Any newlines (other than the final one) are replaced by +spaces before the assignment is made. This is typically used to find +the current directory via a line like: +.DS +CWD != pwd +.DE +.LP +.B Note: +this is intended to be used to execute commands that produce small amounts +of output (e.g. ``pwd''). The implementation is less than intelligent and will +likely freeze if you execute something that produces thousands of +bytes of output (8 Kb is the limit on many UNIX systems). +.LP +The value of a variable may be retrieved by enclosing the variable +name in parentheses or curly braces and preceding the whole thing +with a dollar sign. +.LP +For example, to set the variable CFLAGS to the string +.CW "\-I/sprite/src/lib/libc \-O" ,'' `` +you would place a line +.DS +CFLAGS = \-I/sprite/src/lib/libc \-O +.DE +in the makefile and use the word +.CW "$(CFLAGS)" +wherever you would like the string +.CW "\-I/sprite/src/lib/libc \-O" +to appear. This is called variable expansion. +.Ix 0 def variable expansion +.No +.LP +Unlike Make, PMake will not expand a variable unless it knows +the variable exists. E.g. if you have a +.CW "${i}" +in a shell command and you have not assigned a value to the variable +.CW i +(the empty string is considered a value, by the way), where Make would have +substituted the empty string, PMake will leave the +.CW "${i}" +alone. +To keep PMake from substituting for a variable it knows, precede the +dollar sign with another dollar sign. +(e.g. to pass +.CW "${HOME}" +to the shell, use +.CW "$${HOME}" ). +This causes PMake, in effect, to expand the +.CW $ +macro, which expands to a single +.CW $ . +For compatibility, Make's style of variable expansion will be used +if you invoke PMake with any of the compatibility flags (\c +.B \-V , +.B \-B +or +.B \-M . +The +.B \-V +flag alters just the variable expansion). +.Ix 0 ref flags -V +.Ix 0 ref flags -B +.Ix 0 ref flags -M +.Ix 0 ref compatibility +.LP +.Ix 0 ref variable expansion +There are two different times at which variable expansion occurs: +When parsing a dependency line, the expansion occurs immediately +upon reading the line. If any variable used on a dependency line is +undefined, PMake will print a message and exit. +Variables in shell commands are expanded when the command is +executed. +Variables used inside another variable are expanded whenever the outer +variable is expanded (the expansion of an inner variable has no effect +on the outer variable. I.e. if the outer variable is used on a dependency +line and in a shell command, and the inner variable changes value +between when the dependency line is read and the shell command is +executed, two different values will be substituted for the outer +variable). +.Ix 0 def variable types +.LP +Variables come in four flavors, though they are all expanded the same +and all look about the same. They are (in order of expanding scope): +.RS +.IP \(bu 2 +Local variables. +.Ix 0 ref variable local +.IP \(bu 2 +Command-line variables. +.Ix 0 ref variable command-line +.IP \(bu 2 +Global variables. +.Ix 0 ref variable global +.IP \(bu 2 +Environment variables. +.Ix 0 ref variable environment +.RE +.LP +The classification of variables doesn't matter much, except that the +classes are searched from the top (local) to the bottom (environment) +when looking up a variable. The first one found wins. +.xH 3 Local Variables +.LP +.Ix 0 def variable local +Each target can have as many as seven local variables. These are +variables that are only ``visible'' within that target's shell script +and contain such things as the target's name, all of its sources (from +all its dependency lines), those sources that were out-of-date, etc. +Four local variables are defined for all targets. They are: +.RS +.IP ".TARGET" +.Ix 0 def variable local .TARGET +.Ix 0 def .TARGET +The name of the target. +.IP ".OODATE" +.Ix 0 def variable local .OODATE +.Ix 0 def .OODATE +The list of the sources for the target that were considered out-of-date. +The order in the list is not guaranteed to be the same as the order in +which the dependencies were given. +.IP ".ALLSRC" +.Ix 0 def variable local .ALLSRC +.Ix 0 def .ALLSRC +The list of all sources for this target in the order in which they +were given. +.IP ".PREFIX" +.Ix 0 def variable local .PREFIX +.Ix 0 def .PREFIX +The target without its suffix and without any leading path. E.g. for +the target +.CW ../../lib/compat/fsRead.c , +this variable would contain +.CW fsRead . +.RE +.LP +Three other local variables are set only for certain targets under +special circumstances. These are the ``.IMPSRC,'' +.Ix 0 ref variable local .IMPSRC +.Ix 0 ref .IMPSRC +``.ARCHIVE,'' +.Ix 0 ref variable local .ARCHIVE +.Ix 0 ref .ARCHIVE +and ``.MEMBER'' +.Ix 0 ref variable local .MEMBER +.Ix 0 ref .MEMBER +variables. When they are set and how they are used is described later. +.LP +Four of these variables may be used in sources as well as in shell +scripts. +.Ix 0 def "dynamic source" +.Ix 0 def source dynamic +These are ``.TARGET'', ``.PREFIX'', ``.ARCHIVE'' and ``.MEMBER''. The +variables in the sources are expanded once for each target on the +dependency line, providing what is known as a ``dynamic source,'' +.Rd 0 +allowing you to specify several dependency lines at once. For example, +.DS +$(OBJS) : $(.PREFIX).c +.DE +will create a dependency between each object file and its +corresponding C source file. +.xH 3 Command-line Variables +.LP +.Ix 0 def variable command-line +Command-line variables are set when PMake is first invoked by giving a +variable assignment as one of the arguments. For example, +.DS +pmake "CFLAGS = -I/sprite/src/lib/libc -O" +.DE +would make +.CW CFLAGS +be a command-line variable with the given value. Any assignments to +.CW CFLAGS +in the makefile will have no effect, because once it +is set, there is (almost) nothing you can do to change a command-line +variable (the search order, you see). Command-line variables may be +set using any of the four assignment operators, though only +.CW = +and +.CW ?= +behave as you would expect them to, mostly because assignments to +command-line variables are performed before the makefile is read, thus +the values set in the makefile are unavailable at the time. +.CW += +.Ix 0 ref += +.Ix 0 ref variable assignment appended +is the same as +.CW = , +because the old value of the variable is sought only in the scope in +which the assignment is taking place (for reasons of efficiency that I +won't get into here). +.CW := +and +.CW ?= +.Ix 0 ref := +.Ix 0 ref ?= +.Ix 0 ref variable assignment expanded +.Ix 0 ref variable assignment conditional +will work if the only variables used are in the environment. +.CW != +is sort of pointless to use from the command line, since the same +effect can no doubt be accomplished using the shell's own command +substitution mechanisms (backquotes and all that). +.xH 3 Global Variables +.LP +.Ix 0 def variable global +Global variables are those set or appended-to in the makefile. +There are two classes of global variables: those you set and those PMake sets. +As I said before, the ones you set can have any name you want them to have, +except they may not contain a colon or an exclamation point. +The variables PMake sets (almost) always begin with a +period and always contain upper-case letters, only. The variables are +as follows: +.RS +.IP .PMAKE +.Ix 0 def variable global .PMAKE +.Ix 0 def .PMAKE +.Ix 0 def variable global MAKE +.Ix 0 def MAKE +The name by which PMake was invoked is stored in this variable. For +compatibility, the name is also stored in the MAKE variable. +.IP .MAKEFLAGS +.Ix 0 def variable global .MAKEFLAGS +.Ix 0 def .MAKEFLAGS variable +.Ix 0 def variable global MFLAGS +.Ix 0 def MFLAGS +All the relevant flags with which PMake was invoked. This does not +include such things as +.B \-f +or variable assignments. Again for compatibility, this value is stored +in the MFLAGS variable as well. +.RE +.LP +Two other variables, ``.INCLUDES'' and ``.LIBS,'' are covered in the +section on special targets in chapter 3. +.Ix 0 ref variable global .INCLUDES +.Ix 0 ref variable global .LIBS +.LP +Global variables may be deleted using lines of the form: +.Ix 0 def #undef +.Ix 0 def variable deletion +.DS +#undef \fIvariable\fP +.DE +The +.CW # ' ` +must be the first character on the line. Note that this may only be +done on global variables. +.xH 3 Environment Variables +.LP +.Ix 0 def variable environment +Environment variables are passed by the shell that invoked PMake and +are given by PMake to each shell it invokes. They are expanded like +any other variable, but they cannot be altered in any way. +.LP +One special environment variable, +.CW PMAKE , +.Ix 0 def variable environment PMAKE +is examined by PMake for command-line flags, variable assignments, +etc., it should always use. This variable is examined before the +actual arguments to PMake are. In addition, all flags given to PMake, +either through the +.CW PMAKE +variable or on the command line, are placed in this environment +variable and exported to each shell PMake executes. Thus recursive +invocations of PMake automatically receive the same flags as the +top-most one. +.LP +Using all these variables, you can compress the sample makefile even more: +.DS +OBJS = a.o b.o c.o +program : $(OBJS) + cc $(.ALLSRC) \-o $(.TARGET) +$(OBJS) : defs.h +a.o : a.c + cc \-c a.c +b.o : b.c + cc \-c b.c +c.o : c.c + cc \-c c.c +.DE +.Ix 0 ref variable local .ALLSRC +.Ix 0 ref .ALLSRC +.Ix 0 ref variable local .TARGET +.Ix 0 ref .TARGET +.Rd 3 +.xH 2 Comments +.LP +.Ix 0 def comments +Comments in a makefile start with a `#' character and extend to the +end of the line. They may appear +anywhere you want them, except in a shell command (though the shell +will treat it as a comment, too). If, for some reason, you need to use the `#' +in a variable or on a dependency line, put a backslash in front of it. +PMake will compress the two into a single `#' (Note: this isn't true +if PMake is operating in full-compatibility mode). +.Ix 0 ref flags -M +.Ix 0 ref compatibility +.xH 2 Parallelism +.No +.LP +PMake was specifically designed to re-create several targets at once, +when possible. You do not have to do anything special to cause this to +happen (unless PMake was configured to not act in parallel, in which +case you will have to make use of the +.B \-L +and +.B \-J +flags (see below)), +.Ix 0 ref flags -L +.Ix 0 ref flags -J +but you do have to be careful at times. +.LP +There are several problems you are likely to encounter. One is +that some makefiles (and programs) are written in such a way that it is +impossible for two targets to be made at once. The program +.CW xstr , +for example, +always modifies the files +.CW strings +and +.CW x.c . +There is no way to change it. Thus you cannot run two of them at once +without something being trashed. Similarly, if you have commands +in the makefile that always send output to the same file, you will not +be able to make more than one target at once unless you change the +file you use. You can, for instance, add a +.CW $$$$ +to the end of the file name to tack on the process ID of the shell +executing the command (each +.CW $$ +expands to a single +.CW $ , +thus giving you the shell variable +.CW $$ ). +Since only one shell is used for all the +commands, you'll get the same file name for each command in the +script. +.LP +The other problem comes from improperly-specified dependencies that +worked in Make because of its sequential, depth-first way of examining +them. While I don't want to go into depth on how PMake +works (look in chapter 4 if you're interested), I will warn you that +files in two different ``levels'' of the dependency tree may be +examined in a different order in PMake than they were in Make. For +example, given the makefile +.DS +a : b c +b : d +.DE +PMake will examine the targets in the order +.CW c , +.CW d , +.CW b , +.CW a . +If the makefile's author expected PMake to abort before making +.CW c +if an error occurred while making +.CW b , +or if +.CW b +needed to exist before +.CW c +was made, +s/he will be sorely disappointed. The dependencies are +incomplete, since in both these cases, +.CW c +would depend on +.CW b . +So watch out. +.LP +Another problem you may face is that, while PMake is set up to handle the +output from multiple jobs in a graceful fashion, the same is not so for input. +It has no way to regulate input to different jobs, +so if you use the redirection from +.CW /dev/tty +I mentioned earlier, you must be careful not to run two of the jobs at once. +.xH 2 Writing and Debugging a Makefile +.LP +Now you know most of what's in a makefile, what do you do next? There +are two choices: (1) use one of the uncommonly-available makefile +generators or (2) write your own makefile (I leave out the third choice of +ignoring PMake and doing everything by hand as being beyond the bounds +of common sense). +.LP +When faced with the writing of a makefile, it is usually best to start +from first principles: just what +.I are +you trying to do? What do you want the makefile finally to produce? +.LP +To begin with a somewhat traditional example, let's say you need to +write a makefile to create a program, +.CW expr , +that takes standard infix expressions and converts them to prefix form (for +no readily apparent reason). You've got three source files, in C, that +make up the program: +.CW main.c , +.CW parse.c , +and +.CW output.c . +Harking back to my pithy advice about dependency lines, you write the +first line of the file: +.DS +expr : main.o parse.o output.o +.DE +because you remember +.CW expr +is made from +.CW .o +files, not +.CW .c +files. Similarly for the +.CW .o +files you produce the lines: +.DS +main.o : main.c +parse.o : parse.c +output.o : output.c +main.o parse.o output.o : defs.h +.DE +.LP +Great. You've now got the dependencies specified. What you need now is +commands. These commands, remember, must produce the target on the +dependency line, usually by using the sources you've listed. +You remember about local variables? Good, so it should come +to you as no surprise when you write +.DS +expr : main.o parse.o output.o + cc -o $(.TARGET) $(.ALLSRC) +.DE +Why use the variables? If your program grows to produce postfix +expressions too (which, of course, requires a name change or two), it +is one fewer place you have to change the file. You cannot do this for +the object files, however, because they depend on their corresponding +source files +.I and +.CW defs.h , +thus if you said +.DS + cc -c $(.ALLSRC) +.DE +you'd get (for +.CW main.o ): +.DS + cc -c main.c defs.h +.DE +which is wrong. So you round out the makefile with these lines: +.DS +main.o : main.c + cc -c main.c +parse.o : parse.c + cc -c parse.c +output.o : output.c + cc -c output.c +.DE +.LP +The makefile is now complete and will, in fact, create the program you +want it to without unnecessary compilations or excessive typing on +your part. There are two things wrong with it, however (aside from it +being altogether too long, something I'll address in chapter 3): +.IP 1) +The string +.CW "main.o parse.o output.o" '' `` +is repeated twice, necessitating two changes when you add postfix +(you were planning on that, weren't you?). This is in direct violation +of de Boor's First Rule of writing makefiles: +.QP +.I +Anything that needs to be written more than once +should be placed in a variable. +.IP "\&" +I cannot emphasize this enough as being very important to the +maintenance of a makefile and its program. +.IP 2) +There is no way to alter the way compilations are performed short of +editing the makefile and making the change in all places. This is evil +and violates de Boor's Second Rule, which follows directly from the +first: +.QP +.I +Any flags or programs used inside a makefile should be placed in a variable so +they may be changed, temporarily or permanently, with the greatest ease. +.LP +The makefile should more properly read: +.DS +OBJS = main.o parse.o output.o +expr : $(OBJS) + $(CC) $(CFLAGS) -o $(.TARGET) $(.ALLSRC) +main.o : main.c + $(CC) $(CFLAGS) -c main.c +parse.o : parse.c + $(CC) $(CFLAGS) -c parse.c +output.o : output.c + $(CC) $(CFLAGS) -c output.c +$(OBJS) : defs.h +.DE +Alternatively, if you like the idea of dynamic sources mentioned in +section 2.3.1, +.Rm 0 2.3.1 +.Rd 4 +.Ix 0 ref "dynamic source" +.Ix 0 ref source dynamic +you could write it like this: +.DS +OBJS = main.o parse.o output.o +expr : $(OBJS) + $(CC) $(CFLAGS) -o $(.TARGET) $(.ALLSRC) +$(OBJS) : $(.PREFIX).c defs.h + $(CC) $(CFLAGS) -c $(.PREFIX).c +.DE +These two rules and examples lead to de Boor's First Corollary: +.QP +.I +Variables are your friends. +.LP +Once you've written the makefile comes the sometimes-difficult task of +.Ix 0 ref debugging +making sure the darn thing works. Your most helpful tool to make sure +the makefile is at least syntactically correct is the +.B \-n +.Ix 0 ref flags -n +flag, which allows you to see if PMake will choke on the makefile. The +second thing the +.B \-n +flag lets you do is see what PMake would do without it actually doing +it, thus you can make sure the right commands would be executed were +you to give PMake its head. +.LP +When you find your makefile isn't behaving as you hoped, the first +question that comes to mind (after ``What time is it, anyway?'') is +``Why not?'' In answering this, two flags will serve you well: +.CW "-d m" '' `` +.Ix 0 ref flags -d +and +.CW "-p 2" .'' `` +.Ix 0 ref flags -p +The first causes PMake to tell you as it examines each target in the +makefile and indicate why it is deciding whatever it is deciding. You +can then use the information printed for other targets to see where +you went wrong. The +.CW "-p 2" '' `` +flag makes PMake print out its internal state when it is done, +allowing you to see that you forgot to make that one chapter depend on +that file of macros you just got a new version of. The output from +.CW "-p 2" '' `` +is intended to resemble closely a real makefile, but with additional +information provided and with variables expanded in those commands +PMake actually printed or executed. +.LP +Something to be especially careful about is circular dependencies. +.Ix 0 def dependency circular +E.g. +.DS +a : b +b : c d +d : a +.DE +In this case, because of how PMake works, +.CW c +is the only thing PMake will examine, because +.CW d +and +.CW a +will effectively fall off the edge of the universe, making it +impossible to examine +.CW b +(or them, for that matter). +PMake will tell you (if run in its normal mode) all the targets +involved in any cycle it looked at (i.e. if you have two cycles in the +graph (naughty, naughty), but only try to make a target in one of +them, PMake will only tell you about that one. You'll have to try to +make the other to find the second cycle). When run as Make, it will +only print the first target in the cycle. +.xH 2 Invoking PMake +.LP +.Ix 0 ref flags +.Ix 0 ref arguments +.Ix 0 ref usage +PMake comes with a wide variety of flags to choose from. +They may appear in any order, interspersed with command-line variable +assignments and targets to create. +The flags are as follows: +.IP "\fB\-d\fP \fIwhat\fP" +.Ix 0 def flags -d +.Ix 0 ref debugging +This causes PMake to spew out debugging information that +may prove useful to you. If you can't +figure out why PMake is doing what it's doing, you might try using +this flag. The +.I what +parameter is a string of single characters that tell PMake what +aspects you are interested in. Most of what I describe will make +little sense to you, unless you've dealt with Make before. Just +remember where this table is and come back to it as you read on. +The characters and the information they produce are as follows: +.RS +.IP a +Archive searching and caching. +.IP c +Conditional evaluation. +.IP d +The searching and caching of directories. +.IP j +Various snippets of information related to the running of the multiple +shells. Not particularly interesting. +.IP m +The making of each target: what target is being examined; when it was +last modified; whether it is out-of-date; etc. +.IP p +Makefile parsing. +.IP r +Remote execution. +.IP s +The application of suffix-transformation rules. (See chapter 3) +.IP t +The maintenance of the list of targets. +.IP v +Variable assignment. +.RE +.IP "\&" +Of these all, the +.CW m +and +.CW s +letters will be most useful to you. +If the +.B \-d +is the final argument or the argument from which it would get these +key letters (see below for a note about which argument would be used) +begins with a +.B \- , +all of these debugging flags will be set, resulting in massive amounts +of output. +.IP "\fB\-f\fP \fImakefile\fP" +.Ix 0 def flags -f +Specify a makefile to read different from the standard makefiles +.CW Makefile "\&" ( +or +.CW makefile ). +.Ix 0 ref makefile default +.Ix 0 ref makefile other +If +.I makefile +is ``\-'', PMake uses the standard input. This is useful for making +quick and dirty makefiles.\|.\|. +.Ix 0 ref makefile "quick and dirty" +.IP \fB\-h\fP +.Ix 0 def flags -h +Prints out a summary of the various flags PMake accepts. It can also +be used to find out what level of concurrency was compiled into the +version of PMake you are using (look at +.B \-J +and +.B \-L ) +and various other information on how PMake was configured. +.Ix 0 ref configuration +.Ix 0 ref makefile system +.IP \fB\-i\fP +.Ix 0 def flags -i +If you give this flag, PMake will ignore non-zero status returned +by any of its shells. It's like placing a `\-' before all the commands +in the makefile. +.IP \fB\-k\fP +.Ix 0 def flags -k +This is similar to +.B \-i +in that it allows PMake to continue when it sees an error, but unlike +.B \-i , +where PMake continues blithely as if nothing went wrong, +.B \-k +causes it to recognize the error and only continue work on those +things that don't depend on the target, either directly or indirectly (through +depending on something that depends on it), whose creation returned the error. +The `k' is for ``keep going''.\|.\|. +.Ix 0 ref target +.IP \fB\-l\fP +.Ix 0 def flags -l +PMake has the ability to lock a directory against other +people executing it in the same directory (by means of a file called +``LOCK.make'' that it creates and checks for in the directory). This +is a Good Thing because two people doing the same thing in the same place +can be disastrous for the final product (too many cooks and all that). +Whether this locking is the default is up to your system +administrator. If locking is on, +.B \-l +will turn it off, and vice versa. Note that this locking will not +prevent \fIyou\fP from invoking PMake twice in the same place \*- if +you own the lock file, PMake will warn you about it but continue to execute. +.IP "\fB\-m\fP \fIdirectory\fP" +.Ix 0 def flags -m +Tells PMake another place to search for included makefiles via the <...> +style. Several +.B \-m +options can be given to form a search path. If this construct is used the +default system makefile search path is completely overridden. +To be explained in chapter 3, section 3.2. +.Rm 2 3.2 +.IP \fB\-n\fP +.Ix 0 def flags -n +This flag tells PMake not to execute the commands needed to update the +out-of-date targets in the makefile. Rather, PMake will simply print +the commands it would have executed and exit. This is particularly +useful for checking the correctness of a makefile. If PMake doesn't do +what you expect it to, it's a good chance the makefile is wrong. +.IP "\fB\-p\fP \fInumber\fP" +.Ix 0 def flags -p +.Ix 0 ref debugging +This causes PMake to print its input in a reasonable form, though +not necessarily one that would make immediate sense to anyone but me. The +.I number +is a bitwise-or of 1 and 2 where 1 means it should print the input +before doing any processing and 2 says it should print it after +everything has been re-created. Thus +.CW "\-p 3" +would print it twice\*-once before processing and once after (you +might find the difference between the two interesting). This is mostly +useful to me, but you may find it informative in some bizarre circumstances. +.IP \fB\-q\fP +.Ix 0 def flags -q +If you give PMake this flag, it will not try to re-create anything. It +will just see if anything is out-of-date and exit non-zero if so. +.IP \fB\-r\fP +.Ix 0 def flags -r +When PMake starts up, it reads a default makefile that tells it what +sort of system it's on and gives it some idea of what to do if you +don't tell it anything. I'll tell you about it in chapter 3. If you +give this flag, PMake won't read the default makefile. +.IP \fB\-s\fP +.Ix 0 def flags -s +This causes PMake to not print commands before they're executed. It +is the equivalent of putting an `@' before every command in the +makefile. +.IP \fB\-t\fP +.Ix 0 def flags -t +Rather than try to re-create a target, PMake will simply ``touch'' it +so as to make it appear up-to-date. If the target didn't exist before, +it will when PMake finishes, but if the target did exist, it will +appear to have been updated. +.IP \fB\-v\fP +.Ix 0 def flags -v +This is a mixed-compatibility flag intended to mimic the System V +version of Make. It is the same as giving +.B \-B , +and +.B \-V +as well as turning off directory locking. Targets can still be created +in parallel, however. This is the mode PMake will enter if it is +invoked either as +.CW smake '' `` +or +.CW vmake ''. `` +.IP \fB\-x\fP +.Ix 0 def flags -x +This tells PMake it's ok to export jobs to other machines, if they're +available. It is used when running in Make mode, as exporting in this +mode tends to make things run slower than if the commands were just +executed locally. +.IP \fB\-B\fP +.Ix 0 ref compatibility +.Ix 0 def flags -B +Forces PMake to be as backwards-compatible with Make as possible while +still being itself. +This includes: +.RS +.IP \(bu 2 +Executing one shell per shell command +.IP \(bu 2 +Expanding anything that looks even vaguely like a variable, with the +empty string replacing any variable PMake doesn't know. +.IP \(bu 2 +Refusing to allow you to escape a `#' with a backslash. +.IP \(bu 2 +Permitting undefined variables on dependency lines and conditionals +(see below). Normally this causes PMake to abort. +.RE +.IP \fB\-C\fP +.Ix 0 def flags -C +This nullifies any and all compatibility mode flags you may have given +or implied up to the time the +.B \-C +is encountered. It is useful mostly in a makefile that you wrote for PMake +to avoid bad things happening when someone runs PMake as +.CW make '' `` +or has things set in the environment that tell it to be compatible. +.B \-C +is +.I not +placed in the +.CW PMAKE +environment variable or the +.CW .MAKEFLAGS +or +.CW MFLAGS +global variables. +.Ix 0 ref variable environment PMAKE +.Ix 0 ref variable global .MAKEFLAGS +.Ix 0 ref variable global MFLAGS +.Ix 0 ref .MAKEFLAGS variable +.Ix 0 ref MFLAGS +.IP "\fB\-D\fP \fIvariable\fP" +.Ix 0 def flags -D +Allows you to define a variable to have +.CW 1 '' `` +as its value. The variable is a global variable, not a command-line +variable. This is useful mostly for people who are used to the C +compiler arguments and those using conditionals, which I'll get into +in section 4.3 +.Rm 1 4.3 +.IP "\fB\-I\fP \fIdirectory\fP" +.Ix 0 def flags -I +Tells PMake another place to search for included makefiles. Yet +another thing to be explained in chapter 3 (section 3.2, to be +precise). +.Rm 2 3.2 +.IP "\fB\-J\fP \fInumber\fP" +.Ix 0 def flags -J +Gives the absolute maximum number of targets to create at once on both +local and remote machines. +.IP "\fB\-L\fP \fInumber\fP" +.Ix 0 def flags -L +This specifies the maximum number of targets to create on the local +machine at once. This may be 0, though you should be wary of doing +this, as PMake may hang until a remote machine becomes available, if +one is not available when it is started. +.IP \fB\-M\fP +.Ix 0 ref compatibility +.Ix 0 def flags -M +This is the flag that provides absolute, complete, full compatibility +with Make. It still allows you to use all but a few of the features of +PMake, but it is non-parallel. This is the mode PMake enters if you +call it +.CW make .'' `` +.IP \fB\-P\fP +.Ix 0 def flags -P +.Ix 0 ref "output control" +When creating targets in parallel, several shells are executing at +once, each wanting to write its own two cent's-worth to the screen. +This output must be captured by PMake in some way in order to prevent +the screen from being filled with garbage even more indecipherable +than you usually see. PMake has two ways of doing this, one of which +provides for much cleaner output and a clear separation between the +output of different jobs, the other of which provides a more immediate +response so one can tell what is really happening. The former is done +by notifying you when the creation of a target starts, capturing the +output and transferring it to the screen all at once when the job +finishes. The latter is done by catching the output of the shell (and +its children) and buffering it until an entire line is received, then +printing that line preceded by an indication of which job produced +the output. Since I prefer this second method, it is the one used by +default. The first method will be used if you give the +.B \-P +flag to PMake. +.IP \fB\-V\fP +.Ix 0 def flags -V +As mentioned before, the +.B \-V +flag tells PMake to use Make's style of expanding variables, +substituting the empty string for any variable it doesn't know. +.IP \fB\-W\fP +.Ix 0 def flags -W +There are several times when PMake will print a message at you that is +only a warning, i.e. it can continue to work in spite of your having +done something silly (such as forgotten a leading tab for a shell +command). Sometimes you are well aware of silly things you have done +and would like PMake to stop bothering you. This flag tells it to shut +up about anything non-fatal. +.IP \fB\-X\fP +.Ix 0 def flags -X +This flag causes PMake to not attempt to export any jobs to another +machine. +.LP +Several flags may follow a single `\-'. Those flags that require +arguments take them from successive parameters. E.g. +.DS +pmake -fDnI server.mk DEBUG /chip2/X/server/include +.DE +will cause PMake to read +.CW server.mk +as the input makefile, define the variable +.CW DEBUG +as a global variable and look for included makefiles in the directory +.CW /chip2/X/server/include . +.xH 2 Summary +.LP +A makefile is made of four types of lines: +.RS +.IP \(bu 2 +Dependency lines +.IP \(bu 2 +Creation commands +.IP \(bu 2 +Variable assignments +.IP \(bu 2 +Comments, include statements and conditional directives +.RE +.LP +A dependency line is a list of one or more targets, an operator +.CW : ', (` +.CW :: ', ` +or +.CW ! '), ` +and a list of zero or more sources. Sources may contain wildcards and +certain local variables. +.LP +A creation command is a regular shell command preceded by a tab. In +addition, if the first two characters after the tab (and other +whitespace) are a combination of +.CW @ ' ` +or +.CW - ', ` +PMake will cause the command to not be printed (if the character is +.CW @ ') ` +or errors from it to be ignored (if +.CW - '). ` +A blank line, dependency line or variable assignment terminates a +creation script. There may be only one creation script for each target +with a +.CW : ' ` +or +.CW ! ' ` +operator. +.LP +Variables are places to store text. They may be unconditionally +assigned-to using the +.CW = ' ` +.Ix 0 ref = +.Ix 0 ref variable assignment +operator, appended-to using the +.CW += ' ` +.Ix 0 ref += +.Ix 0 ref variable assignment appended +operator, conditionally (if the variable is undefined) assigned-to +with the +.CW ?= ' ` +.Ix 0 ref ?= +.Ix 0 ref variable assignment conditional +operator, and assigned-to with variable expansion with the +.CW := ' ` +.Ix 0 ref := +.Ix 0 ref variable assignment expanded +operator. The output of a shell command may be assigned to a variable +using the +.CW != ' ` +.Ix 0 ref != +.Ix 0 ref variable assignment shell-output +operator. Variables may be expanded (their value inserted) by enclosing +their name in parentheses or curly braces, preceded by a dollar sign. +A dollar sign may be escaped with another dollar sign. Variables are +not expanded if PMake doesn't know about them. There are seven local +variables: +.CW .TARGET , +.CW .ALLSRC , +.CW .OODATE , +.CW .PREFIX , +.CW .IMPSRC , +.CW .ARCHIVE , +and +.CW .MEMBER . +Four of them +.CW .TARGET , ( +.CW .PREFIX , +.CW .ARCHIVE , +and +.CW .MEMBER ) +may be used to specify ``dynamic sources.'' +.Ix 0 ref "dynamic source" +.Ix 0 ref source dynamic +Variables are good. Know them. Love them. Live them. +.LP +Debugging of makefiles is best accomplished using the +.B \-n , +.B "\-d m" , +and +.B "\-p 2" +flags. +.xH 2 Exercises +.ce +\s+4\fBTBA\fP\s0 +.xH 1 Short-cuts and Other Nice Things +.LP +Based on what I've told you so far, you may have gotten the impression +that PMake is just a way of storing away commands and making sure you +don't forget to compile something. Good. That's just what it is. +However, the ways I've described have been inelegant, at best, and +painful, at worst. +This chapter contains things that make the +writing of makefiles easier and the makefiles themselves shorter and +easier to modify (and, occasionally, simpler). In this chapter, I +assume you are somewhat more +familiar with Sprite (or UNIX, if that's what you're using) than I did +in chapter 2, just so you're on your toes. +So without further ado... +.xH 2 Transformation Rules +.LP +As you know, a file's name consists of two parts: a base name, which +gives some hint as to the contents of the file, and a suffix, which +usually indicates the format of the file. +Over the years, as +.UX +has developed, +naming conventions, with regard to suffixes, have also developed that have +become almost as incontrovertible as Law. E.g. a file ending in +.CW .c +is assumed to contain C source code; one with a +.CW .o +suffix is assumed to be a compiled, relocatable object file that may +be linked into any program; a file with a +.CW .ms +suffix is usually a text file to be processed by Troff with the \-ms +macro package, and so on. +One of the best aspects of both Make and PMake comes from their +understanding of how the suffix of a file pertains to its contents and +their ability to do things with a file based solely on its suffix. This +ability comes from something known as a transformation rule. A +transformation rule specifies how to change a file with one suffix +into a file with another suffix. +.LP +A transformation rule looks much like a dependency line, except the +target is made of two known suffixes stuck together. Suffixes are made +known to PMake by placing them as sources on a dependency line whose +target is the special target +.CW .SUFFIXES . +E.g. +.DS +\&.SUFFIXES : .o .c +\&.c.o : + $(CC) $(CFLAGS) -c $(.IMPSRC) +.DE +The creation script attached to the target is used to transform a file with +the first suffix (in this case, +.CW .c ) +into a file with the second suffix (here, +.CW .o ). +In addition, the target inherits whatever attributes have been applied +to the transformation rule. +The simple rule given above says that to transform a C source file +into an object file, you compile it using +.CW cc +with the +.CW \-c +flag. +This rule is taken straight from the system makefile. Many +transformation rules (and suffixes) are defined there, and I refer you +to it for more examples (type +.CW "pmake -h" '' `` +to find out where it is). +.LP +There are several things to note about the transformation rule given +above: +.RS +.IP 1) +The +.CW .IMPSRC +variable. +.Ix 0 def variable local .IMPSRC +.Ix 0 def .IMPSRC +This variable is set to the ``implied source'' (the file from which +the target is being created; the one with the first suffix), which, in this +case, is the .c file. +.IP 2) +The +.CW CFLAGS +variable. Almost all of the transformation rules in the system +makefile are set up using variables that you can alter in your +makefile to tailor the rule to your needs. In this case, if you want +all your C files to be compiled with the +.B \-g +flag, to provide information for +.CW dbx , +you would set the +.CW CFLAGS +variable to contain +.CW -g +.CW "CFLAGS = -g" '') (`` +and PMake would take care of the rest. +.RE +.LP +To give you a quick example, the makefile in 2.3.4 +.Rm 3 2.3.4 +could be changed to this: +.DS +OBJS = a.o b.o c.o +program : $(OBJS) + $(CC) -o $(.TARGET) $(.ALLSRC) +$(OBJS) : defs.h +.DE +The transformation rule I gave above takes the place of the 6 lines\** +.FS +This is also somewhat cleaner, I think, than the dynamic source +solution presented in 2.6 +.FE +.Rm 4 2.6 +.DS +a.o : a.c + cc -c a.c +b.o : b.c + cc -c b.c +c.o : c.c + cc -c c.c +.DE +.LP +Now you may be wondering about the dependency between the +.CW .o +and +.CW .c +files \*- it's not mentioned anywhere in the new makefile. This is +because it isn't needed: one of the effects of applying a +transformation rule is the target comes to depend on the implied +source. That's why it's called the implied +.I source . +.LP +For a more detailed example. Say you have a makefile like this: +.DS +a.out : a.o b.o + $(CC) $(.ALLSRC) +.DE +and a directory set up like this: +.DS +total 4 +-rw-rw-r-- 1 deboor 34 Sep 7 00:43 Makefile +-rw-rw-r-- 1 deboor 119 Oct 3 19:39 a.c +-rw-rw-r-- 1 deboor 201 Sep 7 00:43 a.o +-rw-rw-r-- 1 deboor 69 Sep 7 00:43 b.c +.DE +While just typing +.CW pmake '' `` +will do the right thing, it's much more informative to type +.CW "pmake -d s" ''. `` +This will show you what PMake is up to as it processes the files. In +this case, PMake prints the following: +.DS +Suff_FindDeps (a.out) + using existing source a.o + applying .o -> .out to "a.o" +Suff_FindDeps (a.o) + trying a.c...got it + applying .c -> .o to "a.c" +Suff_FindDeps (b.o) + trying b.c...got it + applying .c -> .o to "b.c" +Suff_FindDeps (a.c) + trying a.y...not there + trying a.l...not there + trying a.c,v...not there + trying a.y,v...not there + trying a.l,v...not there +Suff_FindDeps (b.c) + trying b.y...not there + trying b.l...not there + trying b.c,v...not there + trying b.y,v...not there + trying b.l,v...not there +--- a.o --- +cc -c a.c +--- b.o --- +cc -c b.c +--- a.out --- +cc a.o b.o +.DE +.LP +.CW Suff_FindDeps +is the name of a function in PMake that is called to check for implied +sources for a target using transformation rules. +The transformations it tries are, naturally +enough, limited to the ones that have been defined (a transformation +may be defined multiple times, by the way, but only the most recent +one will be used). You will notice, however, that there is a definite +order to the suffixes that are tried. This order is set by the +relative positions of the suffixes on the +.CW .SUFFIXES +line \*- the earlier a suffix appears, the earlier it is checked as +the source of a transformation. Once a suffix has been defined, the +only way to change its position in the pecking order is to remove all +the suffixes (by having a +.CW .SUFFIXES +dependency line with no sources) and redefine them in the order you +want. (Previously-defined transformation rules will be automatically +redefined as the suffixes they involve are re-entered.) +.LP +Another way to affect the search order is to make the dependency +explicit. In the above example, +.CW a.out +depends on +.CW a.o +and +.CW b.o . +Since a transformation exists from +.CW .o +to +.CW .out , +PMake uses that, as indicated by the +.CW "using existing source a.o" '' `` +message. +.LP +The search for a transformation starts from the suffix of the target +and continues through all the defined transformations, in the order +dictated by the suffix ranking, until an existing file with the same +base (the target name minus the suffix and any leading directories) is +found. At that point, one or more transformation rules will have been +found to change the one existing file into the target. +.LP +For example, ignoring what's in the system makefile for now, say you +have a makefile like this: +.DS +\&.SUFFIXES : .out .o .c .y .l +\&.l.c : + lex $(.IMPSRC) + mv lex.yy.c $(.TARGET) +\&.y.c : + yacc $(.IMPSRC) + mv y.tab.c $(.TARGET) +\&.c.o : + cc -c $(.IMPSRC) +\&.o.out : + cc -o $(.TARGET) $(.IMPSRC) +.DE +and the single file +.CW jive.l . +If you were to type +.CW "pmake -rd ms jive.out" ,'' `` +you would get the following output for +.CW jive.out : +.DS +Suff_FindDeps (jive.out) + trying jive.o...not there + trying jive.c...not there + trying jive.y...not there + trying jive.l...got it + applying .l -> .c to "jive.l" + applying .c -> .o to "jive.c" + applying .o -> .out to "jive.o" +.DE +and this is why: PMake starts with the target +.CW jive.out , +figures out its suffix +.CW .out ) ( +and looks for things it can transform to a +.CW .out +file. In this case, it only finds +.CW .o , +so it looks for the file +.CW jive.o . +It fails to find it, so it looks for transformations into a +.CW .o +file. Again it has only one choice: +.CW .c . +So it looks for +.CW jive.c +and, as you know, fails to find it. At this point it has two choices: +it can create the +.CW .c +file from either a +.CW .y +file or a +.CW .l +file. Since +.CW .y +came first on the +.CW .SUFFIXES +line, it checks for +.CW jive.y +first, but can't find it, so it looks for +.CW jive.l +and, lo and behold, there it is. +At this point, it has defined a transformation path as follows: +.CW .l +\(-> +.CW .c +\(-> +.CW .o +\(-> +.CW .out +and applies the transformation rules accordingly. For completeness, +and to give you a better idea of what PMake actually did with this +three-step transformation, this is what PMake printed for the rest of +the process: +.DS +Suff_FindDeps (jive.o) + using existing source jive.c + applying .c -> .o to "jive.c" +Suff_FindDeps (jive.c) + using existing source jive.l + applying .l -> .c to "jive.l" +Suff_FindDeps (jive.l) +Examining jive.l...modified 17:16:01 Oct 4, 1987...up-to-date +Examining jive.c...non-existent...out-of-date +--- jive.c --- +lex jive.l +\&.\|.\|. meaningless lex output deleted .\|.\|. +mv lex.yy.c jive.c +Examining jive.o...non-existent...out-of-date +--- jive.o --- +cc -c jive.c +Examining jive.out...non-existent...out-of-date +--- jive.out --- +cc -o jive.out jive.o +.DE +.LP +One final question remains: what does PMake do with targets that have +no known suffix? PMake simply pretends it actually has a known suffix +and searches for transformations accordingly. +The suffix it chooses is the source for the +.CW .NULL +.Ix 0 ref .NULL +target mentioned later. In the system makefile, +.CW .out +is chosen as the ``null suffix'' +.Ix 0 def suffix null +.Ix 0 def "null suffix" +because most people use PMake to create programs. You are, however, +free and welcome to change it to a suffix of your own choosing. +The null suffix is ignored, however, when PMake is in compatibility +mode (see chapter 4). +.xH 2 Including Other Makefiles +.Ix 0 def makefile inclusion +.Rd 2 +.LP +Just as for programs, it is often useful to extract certain parts of a +makefile into another file and just include it in other makefiles +somehow. Many compilers allow you say something like +.DS +#include "defs.h" +.DE +to include the contents of +.CW defs.h +in the source file. PMake allows you to do the same thing for +makefiles, with the added ability to use variables in the filenames. +An include directive in a makefile looks either like this: +.DS +#include +.DE +or this +.DS +#include "file" +.DE +The difference between the two is where PMake searches for the file: +the first way, PMake will look for +the file only in the system makefile directory (or directories) +(to find out what that directory is, give PMake the +.B \-h +flag). +.Ix 0 ref flags -h +The system makefile directory search path can be overridden via the +.B \-m +option. +.Ix 0 ref flags -m +For files in double-quotes, the search is more complex: +.RS +.IP 1) +The directory of the makefile that's including the file. +.IP 2) +The current directory (the one in which you invoked PMake). +.IP 3) +The directories given by you using +.B \-I +flags, in the order in which you gave them. +.IP 4) +Directories given by +.CW .PATH +dependency lines (see chapter 4). +.IP 5) +The system makefile directory. +.RE +.LP +in that order. +.LP +You are free to use PMake variables in the filename\*-PMake will +expand them before searching for the file. You must specify the +searching method with either angle brackets or double-quotes +.I outside +of a variable expansion. I.e. the following +.DS +SYSTEM = + +#include $(SYSTEM) +.DE +won't work. +.xH 2 Saving Commands +.LP +.Ix 0 def ... +There may come a time when you will want to save certain commands to +be executed when everything else is done. For instance: you're +making several different libraries at one time and you want to create the +members in parallel. Problem is, +.CW ranlib +is another one of those programs that can't be run more than once in +the same directory at the same time (each one creates a file called +.CW __.SYMDEF +into which it stuffs information for the linker to use. Two of them +running at once will overwrite each other's file and the result will +be garbage for both parties). You might want a way to save the ranlib +commands til the end so they can be run one after the other, thus +keeping them from trashing each other's file. PMake allows you to do +this by inserting an ellipsis (``.\|.\|.'') as a command between +commands to be run at once and those to be run later. +.LP +So for the +.CW ranlib +case above, you might do this: +.Rd 5 +.DS +lib1.a : $(LIB1OBJS) + rm -f $(.TARGET) + ar cr $(.TARGET) $(.ALLSRC) + ... + ranlib $(.TARGET) + +lib2.a : $(LIB2OBJS) + rm -f $(.TARGET) + ar cr $(.TARGET) $(.ALLSRC) + ... + ranlib $(.TARGET) +.DE +.Ix 0 ref variable local .TARGET +.Ix 0 ref variable local .ALLSRC +This would save both +.DS +ranlib $(.TARGET) +.DE +commands until the end, when they would run one after the other +(using the correct value for the +.CW .TARGET +variable, of course). +.LP +Commands saved in this manner are only executed if PMake manages to +re-create everything without an error. +.xH 2 Target Attributes +.LP +PMake allows you to give attributes to targets by means of special +sources. Like everything else PMake uses, these sources begin with a +period and are made up of all upper-case letters. There are various +reasons for using them, and I will try to give examples for most of +them. Others you'll have to find uses for yourself. Think of it as ``an +exercise for the reader.'' By placing one (or more) of these as a source on a +dependency line, you are ``marking the target(s) with that +attribute.'' That's just the way I phrase it, so you know. +.LP +Any attributes given as sources for a transformation rule are applied +to the target of the transformation rule when the rule is applied. +.Ix 0 def attributes +.Ix 0 ref source +.Ix 0 ref target +.nr pw 12 +.IP .DONTCARE \n(pw +.Ix 0 def attributes .DONTCARE +.Ix 0 def .DONTCARE +If a target is marked with this attribute and PMake can't figure out +how to create it, it will ignore this fact and assume the file isn't +really needed or actually exists and PMake just can't find it. This may prove +wrong, but the error will be noted later on, not when PMake tries to create +the target so marked. This attribute also prevents PMake from +attempting to touch the target if it is given the +.B \-t +flag. +.Ix 0 ref flags -t +.IP .EXEC \n(pw +.Ix 0 def attributes .EXEC +.Ix 0 def .EXEC +This attribute causes its shell script to be executed while having no +effect on targets that depend on it. This makes the target into a sort +of subroutine. An example. Say you have some LISP files that need to +be compiled and loaded into a LISP process. To do this, you echo LISP +commands into a file and execute a LISP with this file as its input +when everything's done. Say also that you have to load other files +from another system before you can compile your files and further, +that you don't want to go through the loading and dumping unless one +of +.I your +files has changed. Your makefile might look a little bit +like this (remember, this is an educational example, and don't worry +about the +.CW COMPILE +rule, all will soon become clear, grasshopper): +.DS +system : init a.fasl b.fasl c.fasl + for i in $(.ALLSRC); + do + echo -n '(load "' >> input + echo -n ${i} >> input + echo '")' >> input + done + echo '(dump "$(.TARGET)")' >> input + lisp < input + +a.fasl : a.l init COMPILE +b.fasl : b.l init COMPILE +c.fasl : c.l init COMPILE +COMPILE : .USE + echo '(compile "$(.ALLSRC)")' >> input +init : .EXEC + echo '(load-system)' > input +.DE +.Ix 0 ref .USE +.Ix 0 ref attributes .USE +.Ix 0 ref variable local .ALLSRC +.IP "\&" +.CW .EXEC +sources, don't appear in the local variables of targets that depend on +them (nor are they touched if PMake is given the +.B \-t +flag). +.Ix 0 ref flags -t +Note that all the rules, not just that for +.CW system , +include +.CW init +as a source. This is because none of the other targets can be made +until +.CW init +has been made, thus they depend on it. +.IP .EXPORT \n(pw +.Ix 0 def attributes .EXPORT +.Ix 0 def .EXPORT +This is used to mark those targets whose creation should be sent to +another machine if at all possible. This may be used by some +exportation schemes if the exportation is expensive. You should ask +your system administrator if it is necessary. +.IP .EXPORTSAME \n(pw +.Ix 0 def attributes .EXPORTSAME +.Ix 0 def .EXPORTSAME +Tells the export system that the job should be exported to a machine +of the same architecture as the current one. Certain operations (e.g. +running text through +.CW nroff ) +can be performed the same on any architecture (CPU and +operating system type), while others (e.g. compiling a program with +.CW cc ) +must be performed on a machine with the same architecture. Not all +export systems will support this attribute. +.IP .IGNORE \n(pw +.Ix 0 def attributes .IGNORE +.Ix 0 def .IGNORE attribute +Giving a target the +.CW .IGNORE +attribute causes PMake to ignore errors from any of the target's commands, as +if they all had `\-' before them. +.IP .INVISIBLE \n(pw +.Ix 0 def attributes .INVISIBLE +.Ix 0 def .INVISIBLE +This allows you to specify one target as a source for another without +the one affecting the other's local variables. Useful if, say, you +have a makefile that creates two programs, one of which is used to +create the other, so it must exist before the other is created. You +could say +.DS +prog1 : $(PROG1OBJS) prog2 MAKEINSTALL +prog2 : $(PROG2OBJS) .INVISIBLE MAKEINSTALL +.DE +where +.CW MAKEINSTALL +is some complex .USE rule (see below) that depends on the +.Ix 0 ref .USE +.CW .ALLSRC +variable containing the right things. Without the +.CW .INVISIBLE +attribute for +.CW prog2 , +the +.CW MAKEINSTALL +rule couldn't be applied. This is not as useful as it should be, and +the semantics may change (or the whole thing go away) in the +not-too-distant future. +.IP .JOIN \n(pw +.Ix 0 def attributes .JOIN +.Ix 0 def .JOIN +This is another way to avoid performing some operations in parallel +while permitting everything else to be done so. Specifically it +forces the target's shell script to be executed only if one or more of the +sources was out-of-date. In addition, the target's name, +in both its +.CW .TARGET +variable and all the local variables of any target that depends on it, +is replaced by the value of its +.CW .ALLSRC +variable. +As an example, suppose you have a program that has four libraries that +compile in the same directory along with, and at the same time as, the +program. You again have the problem with +.CW ranlib +that I mentioned earlier, only this time it's more severe: you +can't just put the ranlib off to the end since the program +will need those libraries before it can be re-created. You can do +something like this: +.DS +program : $(OBJS) libraries + cc -o $(.TARGET) $(.ALLSRC) + +libraries : lib1.a lib2.a lib3.a lib4.a .JOIN + ranlib $(.OODATE) +.DE +.Ix 0 ref variable local .TARGET +.Ix 0 ref variable local .ALLSRC +.Ix 0 ref variable local .OODATE +.Ix 0 ref .TARGET +.Ix 0 ref .ALLSRC +.Ix 0 ref .OODATE +In this case, PMake will re-create the +.CW $(OBJS) +as necessary, along with +.CW lib1.a , +.CW lib2.a , +.CW lib3.a +and +.CW lib4.a . +It will then execute +.CW ranlib +on any library that was changed and set +.CW program 's +.CW .ALLSRC +variable to contain what's in +.CW $(OBJS) +followed by +.CW "lib1.a lib2.a lib3.a lib4.a" .'' `` +In case you're wondering, it's called +.CW .JOIN +because it joins together different threads of the ``input graph'' at +the target marked with the attribute. +Another aspect of the .JOIN attribute is it keeps the target from +being created if the +.B \-t +flag was given. +.Ix 0 ref flags -t +.IP .MAKE \n(pw +.Ix 0 def attributes .MAKE +.Ix 0 def .MAKE +The +.CW .MAKE +attribute marks its target as being a recursive invocation of PMake. +This forces PMake to execute the script associated with the target (if +it's out-of-date) even if you gave the +.B \-n +or +.B \-t +flag. By doing this, you can start at the top of a system and type +.DS +pmake -n +.DE +and have it descend the directory tree (if your makefiles are set up +correctly), printing what it would have executed if you hadn't +included the +.B \-n +flag. +.IP .NOEXPORT \n(pw +.Ix 0 def attributes .NOEXPORT +.Ix 0 def .NOEXPORT attribute +If possible, PMake will attempt to export the creation of all targets to +another machine (this depends on how PMake was configured). Sometimes, +the creation is so simple, it is pointless to send it to another +machine. If you give the target the +.CW .NOEXPORT +attribute, it will be run locally, even if you've given PMake the +.B "\-L 0" +flag. +.IP .NOTMAIN \n(pw +.Ix 0 def attributes .NOTMAIN +.Ix 0 def .NOTMAIN +Normally, if you do not specify a target to make in any other way, +PMake will take the first target on the first dependency line of a +makefile as the target to create. That target is known as the ``Main +Target'' and is labeled as such if you print the dependencies out +using the +.B \-p +flag. +.Ix 0 ref flags -p +Giving a target this attribute tells PMake that the target is +definitely +.I not +the Main Target. +This allows you to place targets in an included makefile and +have PMake create something else by default. +.IP .PRECIOUS \n(pw +.Ix 0 def attributes .PRECIOUS +.Ix 0 def .PRECIOUS attribute +When PMake is interrupted (you type control-C at the keyboard), it +will attempt to clean up after itself by removing any half-made +targets. If a target has the +.CW .PRECIOUS +attribute, however, PMake will leave it alone. An additional side +effect of the `::' operator is to mark the targets as +.CW .PRECIOUS . +.Ix 0 ref operator double-colon +.Ix 0 ref :: +.IP .SILENT \n(pw +.Ix 0 def attributes .SILENT +.Ix 0 def .SILENT attribute +Marking a target with this attribute keeps its commands from being +printed when they're executed, just as if they had an `@' in front of them. +.IP .USE \n(pw +.Ix 0 def attributes .USE +.Ix 0 def .USE +By giving a target this attribute, you turn it into PMake's equivalent +of a macro. When the target is used as a source for another target, +the other target acquires the commands, sources and attributes (except +.CW .USE ) +of the source. +If the target already has commands, the +.CW .USE +target's commands are added to the end. If more than one .USE-marked +source is given to a target, the rules are applied sequentially. +.IP "\&" \n(pw +The typical .USE rule (as I call them) will use the sources of the +target to which it is applied (as stored in the +.CW .ALLSRC +variable for the target) as its ``arguments,'' if you will. +For example, you probably noticed that the commands for creating +.CW lib1.a +and +.CW lib2.a +in the example in section 3.3 +.Rm 5 3.3 +were exactly the same. You can use the +.CW .USE +attribute to eliminate the repetition, like so: +.DS +lib1.a : $(LIB1OBJS) MAKELIB +lib2.a : $(LIB2OBJS) MAKELIB + +MAKELIB : .USE + rm -f $(.TARGET) + ar cr $(.TARGET) $(.ALLSRC) + ... + ranlib $(.TARGET) +.DE +.Ix 0 ref variable local .TARGET +.Ix 0 ref variable local .ALLSRC +.IP "\&" \n(pw +Several system makefiles (not to be confused with The System Makefile) +make use of these .USE rules to make your +life easier (they're in the default, system makefile directory...take a look). +Note that the .USE rule source itself +.CW MAKELIB ) ( +does not appear in any of the targets's local variables. +There is no limit to the number of times I could use the +.CW MAKELIB +rule. If there were more libraries, I could continue with +.CW "lib3.a : $(LIB3OBJS) MAKELIB" '' `` +and so on and so forth. +.xH 2 Special Targets +.LP +As there were in Make, so there are certain targets that have special +meaning to PMake. When you use one on a dependency line, it is the +only target that may appear on the left-hand-side of the operator. +.Ix 0 ref target +.Ix 0 ref operator +As for the attributes and variables, all the special targets +begin with a period and consist of upper-case letters only. +I won't describe them all in detail because some of them are rather +complex and I'll describe them in more detail than you'll want in +chapter 4. +The targets are as follows: +.nr pw 10 +.IP .BEGIN \n(pw +.Ix 0 def .BEGIN +Any commands attached to this target are executed before anything else +is done. You can use it for any initialization that needs doing. +.IP .DEFAULT \n(pw +.Ix 0 def .DEFAULT +This is sort of a .USE rule for any target (that was used only as a +source) that PMake can't figure out any other way to create. It's only +``sort of'' a .USE rule because only the shell script attached to the +.CW .DEFAULT +target is used. The +.CW .IMPSRC +variable of a target that inherits +.CW .DEFAULT 's +commands is set to the target's own name. +.Ix 0 ref .IMPSRC +.Ix 0 ref variable local .IMPSRC +.IP .END \n(pw +.Ix 0 def .END +This serves a function similar to +.CW .BEGIN , +in that commands attached to it are executed once everything has been +re-created (so long as no errors occurred). It also serves the extra +function of being a place on which PMake can hang commands you put off +to the end. Thus the script for this target will be executed before +any of the commands you save with the ``.\|.\|.''. +.Ix 0 ref ... +.IP .EXPORT \n(pw +The sources for this target are passed to the exportation system compiled +into PMake. Some systems will use these sources to configure +themselves. You should ask your system administrator about this. +.IP .IGNORE \n(pw +.Ix 0 def .IGNORE target +.Ix 0 ref .IGNORE attribute +.Ix 0 ref attributes .IGNORE +This target marks each of its sources with the +.CW .IGNORE +attribute. If you don't give it any sources, then it is like +giving the +.B \-i +flag when you invoke PMake \*- errors are ignored for all commands. +.Ix 0 ref flags -i +.IP .INCLUDES \n(pw +.Ix 0 def .INCLUDES target +.Ix 0 def variable global .INCLUDES +.Ix 0 def .INCLUDES variable +The sources for this target are taken to be suffixes that indicate a +file that can be included in a program source file. +The suffix must have already been declared with +.CW .SUFFIXES +(see below). +Any suffix so marked will have the directories on its search path +(see +.CW .PATH , +below) placed in the +.CW .INCLUDES +variable, each preceded by a +.B \-I +flag. This variable can then be used as an argument for the compiler +in the normal fashion. The +.CW .h +suffix is already marked in this way in the system makefile. +.Ix 0 ref makefile system +E.g. if you have +.DS +\&.SUFFIXES : .bitmap +\&.PATH.bitmap : /usr/local/X/lib/bitmaps +\&.INCLUDES : .bitmap +.DE +PMake will place +.CW "-I/usr/local/X/lib/bitmaps" '' `` +in the +.CW .INCLUDES +variable and you can then say +.DS +cc $(.INCLUDES) -c xprogram.c +.DE +(Note: the +.CW .INCLUDES +variable is not actually filled in until the entire makefile has been read.) +.IP .INTERRUPT \n(pw +.Ix 0 def .INTERRUPT +When PMake is interrupted, +it will execute the commands in the script for this target, if it +exists. +.IP .LIBS \n(pw +.Ix 0 def .LIBS target +.Ix 0 def .LIBS variable +.Ix 0 def variable global .LIBS +This does for libraries what +.CW .INCLUDES +does for include files, except the flag used is +.B \-L , +as required by those linkers that allow you to tell them where to find +libraries. The variable used is +.CW .LIBS . +Be forewarned that PMake may not have been compiled to do this if the +linker on your system doesn't accept the +.B \-L +flag, though the +.CW .LIBS +variable will always be defined once the makefile has been read. +.IP .MAIN \n(pw +.Ix 0 def .MAIN +If you didn't give a target (or targets) to create when you invoked +PMake, it will take the sources of this target as the targets to +create. +.IP .MAKEFLAGS \n(pw +.Ix 0 def .MAKEFLAGS target +This target provides a way for you to always specify flags for PMake +when the makefile is used. The flags are just as they would be typed +to the shell (except you can't use shell variables unless they're in +the environment), +though the +.B \-f +and +.B \-r +flags have no effect. +.IP .NULL \n(pw +.Ix 0 def .NULL +.Ix 0 ref suffix null +.Ix 0 ref "null suffix" +This allows you to specify what suffix PMake should pretend a file has +if, in fact, it has no known suffix. Only one suffix may be so +designated. The last source on the dependency line is the suffix that +is used (you should, however, only give one suffix.\|.\|.). +.IP .PATH \n(pw +.Ix 0 def .PATH +If you give sources for this target, PMake will take them as +directories in which to search for files it cannot find in the current +directory. If you give no sources, it will clear out any directories +added to the search path before. Since the effects of this all get +very complex, I'll leave it til chapter four to give you a complete +explanation. +.IP .PATH\fIsuffix\fP \n(pw +.Ix 0 ref .PATH +This does a similar thing to +.CW .PATH , +but it does it only for files with the given suffix. The suffix must +have been defined already. Look at +.B "Search Paths" +(section 4.1) +.Rm 6 4.1 +for more information. +.IP .PRECIOUS \n(pw +.Ix 0 def .PRECIOUS target +.Ix 0 ref .PRECIOUS attribute +.Ix 0 ref attributes .PRECIOUS +Similar to +.CW .IGNORE , +this gives the +.CW .PRECIOUS +attribute to each source on the dependency line, unless there are no +sources, in which case the +.CW .PRECIOUS +attribute is given to every target in the file. +.IP .RECURSIVE \n(pw +.Ix 0 def .RECURSIVE +.Ix 0 ref attributes .MAKE +.Ix 0 ref .MAKE +This target applies the +.CW .MAKE +attribute to all its sources. It does nothing if you don't give it any sources. +.IP .SHELL \n(pw +.Ix 0 def .SHELL +PMake is not constrained to only using the Bourne shell to execute +the commands you put in the makefile. You can tell it some other shell +to use with this target. Check out +.B "A Shell is a Shell is a Shell" +(section 4.4) +.Rm 7 4.4 +for more information. +.IP .SILENT \n(pw +.Ix 0 def .SILENT target +.Ix 0 ref .SILENT attribute +.Ix 0 ref attributes .SILENT +When you use +.CW .SILENT +as a target, it applies the +.CW .SILENT +attribute to each of its sources. If there are no sources on the +dependency line, then it is as if you gave PMake the +.B \-s +flag and no commands will be echoed. +.IP .SUFFIXES \n(pw +.Ix 0 def .SUFFIXES +This is used to give new file suffixes for PMake to handle. Each +source is a suffix PMake should recognize. If you give a +.CW .SUFFIXES +dependency line with no sources, PMake will forget about all the +suffixes it knew (this also nukes the null suffix). +For those targets that need to have suffixes defined, this is how you do it. +.LP +In addition to these targets, a line of the form +.DS +\fIattribute\fP : \fIsources\fP +.DE +applies the +.I attribute +to all the targets listed as +.I sources . +.xH 2 Modifying Variable Expansion +.LP +.Ix 0 def variable expansion modified +.Ix 0 ref variable expansion +.Ix 0 def variable modifiers +Variables need not always be expanded verbatim. PMake defines several +modifiers that may be applied to a variable's value before it is +expanded. You apply a modifier by placing it after the variable name +with a colon between the two, like so: +.DS +${\fIVARIABLE\fP:\fImodifier\fP} +.DE +Each modifier is a single character followed by something specific to +the modifier itself. +You may apply as many modifiers as you want \*- each one is applied to +the result of the previous and is separated from the previous by +another colon. +.LP +There are seven ways to modify a variable's expansion, most of which +come from the C shell variable modification characters: +.RS +.IP "M\fIpattern\fP" +.Ix 0 def :M +.Ix 0 def modifier match +This is used to select only those words (a word is a series of +characters that are neither spaces nor tabs) that match the given +.I pattern . +The pattern is a wildcard pattern like that used by the shell, where +.CW * +means 0 or more characters of any sort; +.CW ? +is any single character; +.CW [abcd] +matches any single character that is either `a', `b', `c' or `d' +(there may be any number of characters between the brackets); +.CW [0-9] +matches any single character that is between `0' and `9' (i.e. any +digit. This form may be freely mixed with the other bracket form), and +`\\' is used to escape any of the characters `*', `?', `[' or `:', +leaving them as regular characters to match themselves in a word. +For example, the system makefile +.CW +uses +.CW "$(CFLAGS:M-[ID]*)" '' `` +to extract all the +.CW \-I +and +.CW \-D +flags that would be passed to the C compiler. This allows it to +properly locate include files and generate the correct dependencies. +.IP "N\fIpattern\fP" +.Ix 0 def :N +.Ix 0 def modifier nomatch +This is identical to +.CW :M +except it substitutes all words that don't match the given pattern. +.IP "S/\fIsearch-string\fP/\fIreplacement-string\fP/[g]" +.Ix 0 def :S +.Ix 0 def modifier substitute +Causes the first occurrence of +.I search-string +in the variable to be replaced by +.I replacement-string , +unless the +.CW g +flag is given at the end, in which case all occurrences of the string +are replaced. The substitution is performed on each word in the +variable in turn. If +.I search-string +begins with a +.CW ^ , +the string must match starting at the beginning of the word. If +.I search-string +ends with a +.CW $ , +the string must match to the end of the word (these two may be +combined to force an exact match). If a backslash precedes these two +characters, however, they lose their special meaning. Variable +expansion also occurs in the normal fashion inside both the +.I search-string +and the +.I replacement-string , +.B except +that a backslash is used to prevent the expansion of a +.CW $ , +not another dollar sign, as is usual. +Note that +.I search-string +is just a string, not a pattern, so none of the usual +regular-expression/wildcard characters have any special meaning save +.CW ^ +and +.CW $ . +In the replacement string, +the +.CW & +character is replaced by the +.I search-string +unless it is preceded by a backslash. +You are allowed to use any character except +colon or exclamation point to separate the two strings. This so-called +delimiter character may be placed in either string by preceding it +with a backslash. +.IP T +.Ix 0 def :T +.Ix 0 def modifier tail +Replaces each word in the variable expansion by its last +component (its ``tail''). For example, given +.DS +OBJS = ../lib/a.o b /usr/lib/libm.a +TAILS = $(OBJS:T) +.DE +the variable +.CW TAILS +would expand to +.CW "a.o b libm.a" .'' `` +.IP H +.Ix 0 def :H +.Ix 0 def modifier head +This is similar to +.CW :T , +except that every word is replaced by everything but the tail (the +``head''). Using the same definition of +.CW OBJS , +the string +.CW "$(OBJS:H)" '' `` +would expand to +.CW "../lib /usr/lib" .'' `` +Note that the final slash on the heads is removed and +anything without a head is replaced by the empty string. +.IP E +.Ix 0 def :E +.Ix 0 def modifier extension +.Ix 0 def modifier suffix +.Ix 0 ref suffix "variable modifier" +.CW :E +replaces each word by its suffix (``extension''). So +.CW "$(OBJS:E)" '' `` +would give you +.CW ".o .a" .'' `` +.IP R +.Ix 0 def :R +.Ix 0 def modifier root +.Ix 0 def modifier base +This replaces each word by everything but the suffix (the ``root'' of +the word). +.CW "$(OBJS:R)" '' `` +expands to `` +.CW "../lib/a b /usr/lib/libm" .'' +.RE +.LP +In addition, the System V style of substitution is also supported. +This looks like: +.DS +$(\fIVARIABLE\fP:\fIsearch-string\fP=\fIreplacement\fP) +.DE +It must be the last modifier in the chain. The search is anchored at +the end of each word, so only suffixes or whole words may be replaced. +.xH 2 More on Debugging +.xH 2 More Exercises +.IP (3.1) +You've got a set programs, each of which is created from its own +assembly-language source file (suffix +.CW .asm ). +Each program can be assembled into two versions, one with error-checking +code assembled in and one without. You could assemble them into files +with different suffixes +.CW .eobj \& ( +and +.CW .obj , +for instance), but your linker only understands files that end in +.CW .obj . +To top it all off, the final executables +.I must +have the suffix +.CW .exe . +How can you still use transformation rules to make your life easier +(Hint: assume the error-checking versions have +.CW ec +tacked onto their prefix)? +.IP (3.2) +Assume, for a moment or two, you want to perform a sort of +``indirection'' by placing the name of a variable into another one, +then you want to get the value of the first by expanding the second +somehow. Unfortunately, PMake doesn't allow constructs like +.DS I +$($(FOO)) +.DE +What do you do? Hint: no further variable expansion is performed after +modifiers are applied, thus if you cause a $ to occur in the +expansion, that's what will be in the result. +.xH 1 PMake for Gods +.LP +This chapter is devoted to those facilities in PMake that allow you to +do a great deal in a makefile with very little work, as well as do +some things you couldn't do in Make without a great deal of work (and +perhaps the use of other programs). The problem with these features, +is they must be handled with care, or you will end up with a mess. +.LP +Once more, I assume a greater familiarity with +.UX +or Sprite than I did in the previous two chapters. +.xH 2 Search Paths +.Rd 6 +.LP +PMake supports the dispersal of files into multiple directories by +allowing you to specify places to look for sources with +.CW .PATH +targets in the makefile. The directories you give as sources for these +targets make up a ``search path.'' Only those files used exclusively +as sources are actually sought on a search path, the assumption being +that anything listed as a target in the makefile can be created by the +makefile and thus should be in the current directory. +.LP +There are two types of search paths +in PMake: one is used for all types of files (including included +makefiles) and is specified with a plain +.CW .PATH +target (e.g. +.CW ".PATH : RCS" ''), `` +while the other is specific to a certain type of file, as indicated by +the file's suffix. A specific search path is indicated by immediately following +the +.CW .PATH +with the suffix of the file. For instance +.DS +\&.PATH.h : /sprite/lib/include /sprite/att/lib/include +.DE +would tell PMake to look in the directories +.CW /sprite/lib/include +and +.CW /sprite/att/lib/include +for any files whose suffix is +.CW .h . +.LP +The current directory is always consulted first to see if a file +exists. Only if it cannot be found there are the directories in the +specific search path, followed by those in the general search path, +consulted. +.LP +A search path is also used when expanding wildcard characters. If the +pattern has a recognizable suffix on it, the path for that suffix will +be used for the expansion. Otherwise the default search path is employed. +.LP +When a file is found in some directory other than the current one, all +local variables that would have contained the target's name +.CW .ALLSRC , ( +and +.CW .IMPSRC ) +will instead contain the path to the file, as found by PMake. +Thus if you have a file +.CW ../lib/mumble.c +and a makefile +.DS +\&.PATH.c : ../lib +mumble : mumble.c + $(CC) -o $(.TARGET) $(.ALLSRC) +.DE +the command executed to create +.CW mumble +would be +.CW "cc -o mumble ../lib/mumble.c" .'' `` +(As an aside, the command in this case isn't strictly necessary, since +it will be found using transformation rules if it isn't given. This is because +.CW .out +is the null suffix by default and a transformation exists from +.CW .c +to +.CW .out . +Just thought I'd throw that in.) +.LP +If a file exists in two directories on the same search path, the file +in the first directory on the path will be the one PMake uses. So if +you have a large system spread over many directories, it would behoove +you to follow a naming convention that avoids such conflicts. +.LP +Something you should know about the way search paths are implemented +is that each directory is read, and its contents cached, exactly once +\&\*- when it is first encountered \*- so any changes to the +directories while PMake is running will not be noted when searching +for implicit sources, nor will they be found when PMake attempts to +discover when the file was last modified, unless the file was created in the +current directory. While people have suggested that PMake should read +the directories each time, my experience suggests that the caching seldom +causes problems. In addition, not caching the directories slows things +down enormously because of PMake's attempts to apply transformation +rules through non-existent files \*- the number of extra file-system +searches is truly staggering, especially if many files without +suffixes are used and the null suffix isn't changed from +.CW .out . +.xH 2 Archives and Libraries +.LP +.UX +and Sprite allow you to merge files into an archive using the +.CW ar +command. Further, if the files are relocatable object files, you can +run +.CW ranlib +on the archive and get yourself a library that you can link into any +program you want. The main problem with archives is they double the +space you need to store the archived files, since there's one copy in +the archive and one copy out by itself. The problem with libraries is +you usually think of them as +.CW -lm +rather than +.CW /usr/lib/libm.a +and the linker thinks they're out-of-date if you so much as look at +them. +.LP +PMake solves the problem with archives by allowing you to tell it to +examine the files in the archives (so you can remove the individual +files without having to regenerate them later). To handle the problem +with libraries, PMake adds an additional way of deciding if a library +is out-of-date: +.IP \(bu 2 +If the table of contents is older than the library, or is missing, the +library is out-of-date. +.LP +A library is any target that looks like +.CW \-l name'' `` +or that ends in a suffix that was marked as a library using the +.CW .LIBS +target. +.CW .a +is so marked in the system makefile. +.LP +Members of an archive are specified as +``\fIarchive\fP(\fImember\fP[ \fImember\fP...])''. +Thus +.CW libdix.a(window.o) '' ``' +specifies the file +.CW window.o +in the archive +.CW libdix.a . +You may also use wildcards to specify the members of the archive. Just +remember that most the wildcard characters will only find +.I existing +files. +.LP +A file that is a member of an archive is treated specially. If the +file doesn't exist, but it is in the archive, the modification time +recorded in the archive is used for the file when determining if the +file is out-of-date. When figuring out how to make an archived member target +(not the file itself, but the file in the archive \*- the +\fIarchive\fP(\fImember\fP) target), special care is +taken with the transformation rules, as follows: +.IP \(bu 2 +\&\fIarchive\fP(\fImember\fP) is made to depend on \fImember\fP. +.IP \(bu 2 +The transformation from the \fImember\fP's suffix to the +\fIarchive\fP's suffix is applied to the \fIarchive\fP(\fImember\fP) target. +.IP \(bu 2 +The \fIarchive\fP(\fImember\fP)'s +.CW .TARGET +variable is set to the name of the \fImember\fP if \fImember\fP is +actually a target, or the path to the member file if \fImember\fP is +only a source. +.IP \(bu 2 +The +.CW .ARCHIVE +variable for the \fIarchive\fP(\fImember\fP) target is set to the name +of the \fIarchive\fP. +.Ix 0 def variable local .ARCHIVE +.Ix 0 def .ARCHIVE +.IP \(bu 2 +The +.CW .MEMBER +variable is set to the actual string inside the parentheses. In most +cases, this will be the same as the +.CW .TARGET +variable. +.Ix 0 def variable local .MEMBER +.Ix 0 def .MEMBER +.IP \(bu 2 +The \fIarchive\fP(\fImember\fP)'s place in the local variables of the +targets that depend on it is taken by the value of its +.CW .TARGET +variable. +.LP +Thus, a program library could be created with the following makefile: +.DS +\&.o.a : + ... + rm -f $(.TARGET:T) +OBJS = obj1.o obj2.o obj3.o +libprog.a : libprog.a($(OBJS)) + ar cru $(.TARGET) $(.OODATE) + ranlib $(.TARGET) +.DE +This will cause the three object files to be compiled (if the +corresponding source files were modified after the object file or, if +that doesn't exist, the archived object file), the out-of-date ones +archived in +.CW libprog.a , +a table of contents placed in the archive and the newly-archived +object files to be removed. +.LP +All this is used in the +.CW makelib.mk +system makefile to create a single library with ease. This makefile +looks like this: +.DS +.SM +# +# Rules for making libraries. The object files that make up the library +# are removed once they are archived. +# +# To make several libraries in parallel, you should define the variable +# "many_libraries". This will serialize the invocations of ranlib. +# +# To use, do something like this: +# +# OBJECTS = +# +# fish.a: fish.a($(OBJECTS)) MAKELIB +# +# + +#ifndef _MAKELIB_MK +_MAKELIB_MK = + +#include + +\&.po.a .o.a : + ... + rm -f $(.MEMBER) + +ARFLAGS ?= crl + +# +# Re-archive the out-of-date members and recreate the library's table of +# contents using ranlib. If many_libraries is defined, put the ranlib +# off til the end so many libraries can be made at once. +# +MAKELIB : .USE .PRECIOUS + ar $(ARFLAGS) $(.TARGET) $(.OODATE) +#ifndef no_ranlib +# ifdef many_libraries + ... +# endif /* many_libraries */ + ranlib $(.TARGET) +#endif /* no_ranlib */ + +#endif /* _MAKELIB_MK */ +.DE +.xH 2 On the Condition... +.Rd 1 +.LP +Like the C compiler before it, PMake allows you to configure the makefile, +based on the current environment, using conditional statements. A +conditional looks like this: +.DS +#if \fIboolean expression\fP +\fIlines\fP +#elif \fIanother boolean expression\fP +\fImore lines\fP +#else +\fIstill more lines\fP +#endif +.DE +They may be nested to a maximum depth of 30 and may occur anywhere +(except in a comment, of course). The +.CW # '' `` +must the very first character on the line. +.LP +Each +.I "boolean expression" +is made up of terms that look like function calls, the standard C +boolean operators +.CW && , +.CW || , +and +.CW ! , +and the standard relational operators +.CW == , +.CW != , +.CW > , +.CW >= , +.CW < , +and +.CW <= , +with +.CW == +and +.CW != +being overloaded to allow string comparisons as well. +.CW && +represents logical AND; +.CW || +is logical OR and +.CW ! +is logical NOT. The arithmetic and string operators take precedence +over all three of these operators, while NOT takes precedence over +AND, which takes precedence over OR. This precedence may be +overridden with parentheses, and an expression may be parenthesized to +your heart's content. Each term looks like a call on one of four +functions: +.nr pw 9 +.Ix 0 def make +.Ix 0 def conditional make +.Ix 0 def if make +.IP make \n(pw +The syntax is +.CW make( \fItarget\fP\c +.CW ) +where +.I target +is a target in the makefile. This is true if the given target was +specified on the command line, or as the source for a +.CW .MAIN +target (note that the sources for +.CW .MAIN +are only used if no targets were given on the command line). +.IP defined \n(pw +.Ix 0 def defined +.Ix 0 def conditional defined +.Ix 0 def if defined +The syntax is +.CW defined( \fIvariable\fP\c +.CW ) +and is true if +.I variable +is defined. Certain variables are defined in the system makefile that +identify the system on which PMake is being run. +.IP exists \n(pw +.Ix 0 def exists +.Ix 0 def conditional exists +.Ix 0 def if exists +The syntax is +.CW exists( \fIfile\fP\c +.CW ) +and is true if the file can be found on the global search path +(i.e. that defined by +.CW .PATH +targets, not by +.CW .PATH \fIsuffix\fP +targets). +.IP empty \n(pw +.Ix 0 def empty +.Ix 0 def conditional empty +.Ix 0 def if empty +This syntax is much like the others, except the string inside the +parentheses is of the same form as you would put between parentheses +when expanding a variable, complete with modifiers and everything. The +function returns true if the resulting string is empty (NOTE: an undefined +variable in this context will cause at the very least a warning +message about a malformed conditional, and at the worst will cause the +process to stop once it has read the makefile. If you want to check +for a variable being defined or empty, use the expression +.CW !defined( \fIvar\fP\c `` +.CW ") || empty(" \fIvar\fP\c +.CW ) '' +as the definition of +.CW || +will prevent the +.CW empty() +from being evaluated and causing an error, if the variable is +undefined). This can be used to see if a variable contains a given +word, for example: +.DS +#if !empty(\fIvar\fP:M\fIword\fP) +.DE +.LP +The arithmetic and string operators may only be used to test the value +of a variable. The lefthand side must contain the variable expansion, +while the righthand side contains either a string, enclosed in +double-quotes, or a number. The standard C numeric conventions (except +for specifying an octal number) apply to both sides. E.g. +.DS +#if $(OS) == 4.3 + +#if $(MACHINE) == "sun3" + +#if $(LOAD_ADDR) < 0xc000 +.DE +are all valid conditionals. In addition, the numeric value of a +variable can be tested as a boolean as follows: +.DS +#if $(LOAD) +.DE +would see if +.CW LOAD +contains a non-zero value and +.DS +#if !$(LOAD) +.DE +would test if +.CW LOAD +contains a zero value. +.LP +In addition to the bare +.CW #if ,'' `` +there are other forms that apply one of the first two functions to each +term. They are as follows: +.DS + ifdef \fRdefined\fP + ifndef \fR!defined\fP + ifmake \fRmake\fP + ifnmake \fR!make\fP +.DE +There are also the ``else if'' forms: +.CW elif , +.CW elifdef , +.CW elifndef , +.CW elifmake , +and +.CW elifnmake . +.LP +For instance, if you wish to create two versions of a program, one of which +is optimized (the production version) and the other of which is for debugging +(has symbols for dbx), you have two choices: you can create two +makefiles, one of which uses the +.CW \-g +flag for the compilation, while the other uses the +.CW \-O +flag, or you can use another target (call it +.CW debug ) +to create the debug version. The construct below will take care of +this for you. I have also made it so defining the variable +.CW DEBUG +(say with +.CW "pmake -D DEBUG" ) +will also cause the debug version to be made. +.DS +#if defined(DEBUG) || make(debug) +CFLAGS += -g +#else +CFLAGS += -O +#endif +.DE +There are, of course, problems with this approach. The most glaring +annoyance is that if you want to go from making a debug version to +making a production version, you have to remove all the object files, +or you will get some optimized and some debug versions in the same +program. Another annoyance is you have to be careful not to make two +targets that ``conflict'' because of some conditionals in the +makefile. For instance +.DS +#if make(print) +FORMATTER = ditroff -Plaser_printer +#endif +#if make(draft) +FORMATTER = nroff -Pdot_matrix_printer +#endif +.DE +would wreak havoc if you tried +.CW "pmake draft print" '' `` +since you would use the same formatter for each target. As I said, +this all gets somewhat complicated. +.xH 2 A Shell is a Shell is a Shell +.Rd 7 +.LP +In normal operation, the Bourne Shell (better known as +.CW sh '') `` +is used to execute the commands to re-create targets. PMake also allows you +to specify a different shell for it to use when executing these +commands. There are several things PMake must know about the shell you +wish to use. These things are specified as the sources for the +.CW .SHELL +.Ix 0 ref .SHELL +.Ix 0 ref target .SHELL +target by keyword, as follows: +.IP "\fBpath=\fP\fIpath\fP" +PMake needs to know where the shell actually resides, so it can +execute it. If you specify this and nothing else, PMake will use the +last component of the path and look in its table of the shells it +knows and use the specification it finds, if any. Use this if you just +want to use a different version of the Bourne or C Shell (yes, PMake knows +how to use the C Shell too). +.IP "\fBname=\fP\fIname\fP" +This is the name by which the shell is to be known. It is a single +word and, if no other keywords are specified (other than +.B path ), +it is the name by which PMake attempts to find a specification for +it (as mentioned above). You can use this if you would just rather use +the C Shell than the Bourne Shell +.CW ".SHELL: name=csh" '' (`` +will do it). +.IP "\fBquiet=\fP\fIecho-off command\fP" +As mentioned before, PMake actually controls whether commands are +printed by introducing commands into the shell's input stream. This +keyword, and the next two, control what those commands are. The +.B quiet +keyword is the command used to turn echoing off. Once it is turned +off, echoing is expected to remain off until the echo-on command is given. +.IP "\fBecho=\fP\fIecho-on command\fP" +The command PMake should give to turn echoing back on again. +.IP "\fBfilter=\fP\fIprinted echo-off command\fP" +Many shells will echo the echo-off command when it is given. This +keyword tells PMake in what format the shell actually prints the +echo-off command. Wherever PMake sees this string in the shell's +output, it will delete it and any following whitespace, up to and +including the next newline. See the example at the end of this section +for more details. +.IP "\fBechoFlag=\fP\fIflag to turn echoing on\fP" +Unless a target has been marked +.CW .SILENT , +PMake wants to start the shell running with echoing on. To do this, it +passes this flag to the shell as one of its arguments. If either this +or the next flag begins with a `\-', the flags will be passed to the +shell as separate arguments. Otherwise, the two will be concatenated +(if they are used at the same time, of course). +.IP "\fBerrFlag=\fP\fIflag to turn error checking on\fP" +Likewise, unless a target is marked +.CW .IGNORE , +PMake wishes error-checking to be on from the very start. To this end, +it will pass this flag to the shell as an argument. The same rules for +an initial `\-' apply as for the +.B echoFlag . +.IP "\fBcheck=\fP\fIcommand to turn error checking on\fP" +Just as for echo-control, error-control is achieved by inserting +commands into the shell's input stream. This is the command to make +the shell check for errors. It also serves another purpose if the +shell doesn't have error-control as commands, but I'll get into that +in a minute. Again, once error checking has been turned on, it is +expected to remain on until it is turned off again. +.IP "\fBignore=\fP\fIcommand to turn error checking off\fP" +This is the command PMake uses to turn error checking off. It has +another use if the shell doesn't do error-control, but I'll tell you +about that.\|.\|.\|now. +.IP "\fBhasErrCtl=\fP\fIyes or no\fP" +This takes a value that is either +.B yes +or +.B no . +Now you might think that the existence of the +.B check +and +.B ignore +keywords would be enough to tell PMake if the shell can do +error-control, but you'd be wrong. If +.B hasErrCtl +is +.B yes , +PMake uses the check and ignore commands in a straight-forward manner. +If this is +.B no , +however, their use is rather different. In this case, the check +command is used as a template, in which the string +.B %s +is replaced by the command that's about to be executed, to produce a +command for the shell that will echo the command to be executed. The +ignore command is also used as a template, again with +.B %s +replaced by the command to be executed, to produce a command that will +execute the command to be executed and ignore any error it returns. +When these strings are used as templates, you must provide newline(s) +.CW \en '') (`` +in the appropriate place(s). +.LP +The strings that follow these keywords may be enclosed in single or +double quotes (the quotes will be stripped off) and may contain the +usual C backslash-characters (\en is newline, \er is return, \eb is +backspace, \e' escapes a single-quote inside single-quotes, \e" +escapes a double-quote inside double-quotes). Now for an example. +.LP +This is actually the contents of the +.CW +system makefile, and causes PMake to use the Bourne Shell in such a +way that each command is printed as it is executed. That is, if more +than one command is given on a line, each will be printed separately. +Similarly, each time the body of a loop is executed, the commands +within that loop will be printed, etc. The specification runs like +this: +.DS +# +# This is a shell specification to have the Bourne shell echo +# the commands just before executing them, rather than when it reads +# them. Useful if you want to see how variables are being expanded, etc. +# +\&.SHELL : path=/bin/sh \e + quiet="set -" \e + echo="set -x" \e + filter="+ set - " \e + echoFlag=x \e + errFlag=e \e + hasErrCtl=yes \e + check="set -e" \e + ignore="set +e" +.DE +.LP +It tells PMake the following: +.Bp +The shell is located in the file +.CW /bin/sh . +It need not tell PMake that the name of the shell is +.CW sh +as PMake can figure that out for itself (it's the last component of +the path). +.Bp +The command to stop echoing is +.CW "set -" . +.Bp +The command to start echoing is +.CW "set -x" . +.Bp +When the echo off command is executed, the shell will print +.CW "+ set - " +(The `+' comes from using the +.CW \-x +flag (rather than the +.CW \-v +flag PMake usually uses)). PMake will remove all occurrences of this +string from the output, so you don't notice extra commands you didn't +put there. +.Bp +The flag the Bourne Shell will take to start echoing in this way is +the +.CW \-x +flag. The Bourne Shell will only take its flag arguments concatenated +as its first argument, so neither this nor the +.B errFlag +specification begins with a \-. +.Bp +The flag to use to turn error-checking on from the start is +.CW \-e . +.Bp +The shell can turn error-checking on and off, and the commands to do +so are +.CW "set +e" +and +.CW "set -e" , +respectively. +.LP +I should note that this specification is for Bourne Shells that are +not part of Berkeley +.UX , +as shells from Berkeley don't do error control. You can get a similar +effect, however, by changing the last three lines to be: +.DS + hasErrCtl=no \e + check="echo \e"+ %s\e"\en" \e + ignore="sh -c '%s || exit 0\en" +.DE +.LP +This will cause PMake to execute the two commands +.DS +echo "+ \fIcmd\fP" +sh -c '\fIcmd\fP || true' +.DE +for each command for which errors are to be ignored. (In case you are +wondering, the thing for +.CW ignore +tells the shell to execute another shell without error checking on and +always exit 0, since the +.B || +causes the +.CW "exit 0" +to be executed only if the first command exited non-zero, and if the +first command exited zero, the shell will also exit zero, since that's +the last command it executed). +.xH 2 Compatibility +.Ix 0 ref compatibility +.LP +There are three (well, 3 \(12) levels of backwards-compatibility built +into PMake. Most makefiles will need none at all. Some may need a +little bit of work to operate correctly when run in parallel. Each +level encompasses the previous levels (e.g. +.B \-B +(one shell per command) implies +.B \-V ) +The three levels are described in the following three sections. +.xH 3 DEFCON 3 \*- Variable Expansion +.Ix 0 ref compatibility +.LP +As noted before, PMake will not expand a variable unless it knows of a +value for it. This can cause problems for makefiles that expect to +leave variables undefined except in special circumstances (e.g. if +more flags need to be passed to the C compiler or the output from a +text processor should be sent to a different printer). If the +variables are enclosed in curly braces +.CW ${PRINTER} ''), (`` +the shell will let them pass. If they are enclosed in parentheses, +however, the shell will declare a syntax error and the make will come +to a grinding halt. +.LP +You have two choices: change the makefile to define the variables +(their values can be overridden on the command line, since that's +where they would have been set if you used Make, anyway) or always give the +.B \-V +flag (this can be done with the +.CW .MAKEFLAGS +target, if you want). +.xH 3 DEFCON 2 \*- The Number of the Beast +.Ix 0 ref compatibility +.LP +Then there are the makefiles that expect certain commands, such as +changing to a different directory, to not affect other commands in a +target's creation script. You can solve this is either by going +back to executing one shell per command (which is what the +.B \-B +flag forces PMake to do), which slows the process down a good bit and +requires you to use semicolons and escaped newlines for shell constructs, or +by changing the makefile to execute the offending command(s) in a subshell +(by placing the line inside parentheses), like so: +.DS +install :: .MAKE + (cd src; $(.PMAKE) install) + (cd lib; $(.PMAKE) install) + (cd man; $(.PMAKE) install) +.DE +.Ix 0 ref operator double-colon +.Ix 0 ref variable global .PMAKE +.Ix 0 ref .PMAKE +.Ix 0 ref .MAKE +.Ix 0 ref attribute .MAKE +This will always execute the three makes (even if the +.B \-n +flag was given) because of the combination of the ``::'' operator and +the +.CW .MAKE +attribute. Each command will change to the proper directory to perform +the install, leaving the main shell in the directory in which it started. +.xH 3 "DEFCON 1 \*- Imitation is the Not the Highest Form of Flattery" +.Ix 0 ref compatibility +.LP +The final category of makefile is the one where every command requires +input, the dependencies are incompletely specified, or you simply +cannot create more than one target at a time, as mentioned earlier. In +addition, you may not have the time or desire to upgrade the makefile +to run smoothly with PMake. If you are the conservative sort, this is +the compatibility mode for you. It is entered either by giving PMake +the +.B \-M +flag (for Make), or by executing PMake as +.CW make .'' `` +In either case, PMake performs things exactly like Make (while still +supporting most of the nice new features PMake provides). This +includes: +.IP \(bu 2 +No parallel execution. +.IP \(bu 2 +Targets are made in the exact order specified by the makefile. The +sources for each target are made in strict left-to-right order, etc. +.IP \(bu 2 +A single Bourne shell is used to execute each command, thus the +shell's +.CW $$ +variable is useless, changing directories doesn't work across command +lines, etc. +.IP \(bu 2 +If no special characters exist in a command line, PMake will break the +command into words itself and execute the command directly, without +executing a shell first. The characters that cause PMake to execute a +shell are: +.CW # , +.CW = , +.CW | , +.CW ^ , +.CW ( , +.CW ) , +.CW { , +.CW } , +.CW ; , +.CW & , +.CW < , +.CW > , +.CW * , +.CW ? , +.CW [ , +.CW ] , +.CW : , +.CW $ , +.CW ` , +and +.CW \e . +You should notice that these are all the characters that are given +special meaning by the shell (except +.CW ' +and +.CW " , +which PMake deals with all by its lonesome). +.IP \(bu 2 +The use of the null suffix is turned off. +.Ix 0 ref "null suffix" +.Ix 0 ref suffix null +.xH 2 The Way Things Work +.LP +When PMake reads the makefile, it parses sources and targets into +nodes in a graph. The graph is directed only in the sense that PMake +knows which way is up. Each node contains not only links to all its +parents and children (the nodes that depend on it and those on which +it depends, respectively), but also a count of the number of its +children that have already been processed. +.LP +The most important thing to know about how PMake uses this graph is +that the traversal is breadth-first and occurs in two passes. +.LP +After PMake has parsed the makefile, it begins with the nodes the user +has told it to make (either on the command line, or via a +.CW .MAIN +target, or by the target being the first in the file not labeled with +the +.CW .NOTMAIN +attribute) placed in a queue. It continues to take the node off the +front of the queue, mark it as something that needs to be made, pass +the node to +.CW Suff_FindDeps +(mentioned earlier) to find any implicit sources for the node, and +place all the node's children that have yet to be marked at the end of +the queue. If any of the children is a +.CW .USE +rule, its attributes are applied to the parent, then its commands are +appended to the parent's list of commands and its children are linked +to its parent. The parent's unmade children counter is then decremented +(since the +.CW .USE +node has been processed). You will note that this allows a +.CW .USE +node to have children that are +.CW .USE +nodes and the rules will be applied in sequence. +If the node has no children, it is placed at the end of +another queue to be examined in the second pass. This process +continues until the first queue is empty. +.LP +At this point, all the leaves of the graph are in the examination +queue. PMake removes the node at the head of the queue and sees if it +is out-of-date. If it is, it is passed to a function that will execute +the commands for the node asynchronously. When the commands have +completed, all the node's parents have their unmade children counter +decremented and, if the counter is then 0, they are placed on the +examination queue. Likewise, if the node is up-to-date. Only those +parents that were marked on the downward pass are processed in this +way. Thus PMake traverses the graph back up to the nodes the user +instructed it to create. When the examination queue is empty and no +shells are running to create a target, PMake is finished. +.LP +Once all targets have been processed, PMake executes the commands +attached to the +.CW .END +target, either explicitly or through the use of an ellipsis in a shell +script. If there were no errors during the entire process but there +are still some targets unmade (PMake keeps a running count of how many +targets are left to be made), there is a cycle in the graph. PMake does +a depth-first traversal of the graph to find all the targets that +weren't made and prints them out one by one. +.xH 1 Answers to Exercises +.IP (3.1) +This is something of a trick question, for which I apologize. The +trick comes from the UNIX definition of a suffix, which PMake doesn't +necessarily share. You will have noticed that all the suffixes used in +this tutorial (and in UNIX in general) begin with a period +.CW .ms , ( +.CW .c , +etc.). Now, PMake's idea of a suffix is more like English's: it's the +characters at the end of a word. With this in mind, one possible +.Ix 0 def suffix +solution to this problem goes as follows: +.DS I +\&.SUFFIXES : ec.exe .exe ec.obj .obj .asm +ec.objec.exe .obj.exe : + link -o $(.TARGET) $(.IMPSRC) +\&.asmec.obj : + asm -o $(.TARGET) -DDO_ERROR_CHECKING $(.IMPSRC) +\&.asm.obj : + asm -o $(.TARGET) $(.IMPSRC) +.DE +.IP (3.2) +The trick to this one lies in the ``:='' variable-assignment operator +and the ``:S'' variable-expansion modifier. +.Ix 0 ref variable assignment expanded +.Ix 0 ref variable expansion modified +.Ix 0 ref modifier substitute +.Ix 0 ref :S +.Ix 0 ref := +Basically what you want is to take the pointer variable, so to speak, +and transform it into an invocation of the variable at which it +points. You might try something like +.DS I +$(PTR:S/^/\e$(/:S/$/)) +.DE +which places +.CW $( '' `` +at the front of the variable name and +.CW ) '' `` +at the end, thus transforming +.CW VAR ,'' `` +for example, into +.CW $(VAR) ,'' `` +which is just what we want. Unfortunately (as you know if you've tried +it), since, as it says in the hint, PMake does no further substitution +on the result of a modified expansion, that's \fIall\fP you get. The +solution is to make use of ``:='' to place that string into yet +another variable, then invoke the other variable directly: +.DS I +*PTR := $(PTR:S/^/\e$(/:S/$/)/) +.DE +You can then use +.CW $(*PTR) '' `` +to your heart's content. +.de Gp +.XP +\&\fB\\$1:\fP +.. +.xH 1 Glossary of Jargon +.Gp "attribute" +A property given to a target that causes PMake to treat it differently. +.Gp "command script" +The lines immediately following a dependency line that specify +commands to execute to create each of the targets on the dependency +line. Each line in the command script must begin with a tab. +.Gp "command-line variable" +A variable defined in an argument when PMake is first executed. +Overrides all assignments to the same variable name in the makefile. +.Gp "conditional" +A construct much like that used in C that allows a makefile to be +configured on the fly based on the local environment, or on what is being +made by that invocation of PMake. +.Gp "creation script" +Commands used to create a target. See ``command script.'' +.Gp "dependency" +The relationship between a source and a target. This comes in three +flavors, as indicated by the operator between the target and the +source. `:' gives a straight time-wise dependency (if the target is +older than the source, the target is out-of-date), while `!' provides +simply an ordering and always considers the target out-of-date. `::' +is much like `:', save it creates multiple instances of a target each +of which depends on its own list of sources. +.Gp "dynamic source" +This refers to a source that has a local variable invocation in it. It +allows a single dependency line to specify a different source for each +target on the line. +.Gp "global variable" +Any variable defined in a makefile. Takes precedence over variables +defined in the environment, but not over command-line or local variables. +.Gp "input graph" +What PMake constructs from a makefile. Consists of nodes made of the +targets in the makefile, and the links between them (the +dependencies). The links are directed (from source to target) and +there may not be any cycles (loops) in the graph. +.Gp "local variable" +A variable defined by PMake visible only in a target's shell script. +There are seven local variables, not all of which are defined for +every target: +.CW .TARGET , +.CW .ALLSRC , +.CW .OODATE , +.CW .PREFIX , +.CW .IMPSRC , +.CW .ARCHIVE , +and +.CW .MEMBER . +.CW .TARGET , +.CW .PREFIX , +.CW .ARCHIVE , +and +.CW .MEMBER +may be used on dependency lines to create ``dynamic sources.'' +.Gp "makefile" +A file that describes how a system is built. If you don't know what it +is after reading this tutorial.\|.\|.\|. +.Gp "modifier" +A letter, following a colon, used to alter how a variable is expanded. +It has no effect on the variable itself. +.Gp "operator" +What separates a source from a target (on a dependency line) and specifies +the relationship between the two. There are three: +.CW : ', ` +.CW :: ', ` +and +.CW ! '. ` +.Gp "search path" +A list of directories in which a file should be sought. PMake's view +of the contents of directories in a search path does not change once +the makefile has been read. A file is sought on a search path only if +it is exclusively a source. +.Gp "shell" +A program to which commands are passed in order to create targets. +.Gp "source" +Anything to the right of an operator on a dependency line. Targets on +the dependency line are usually created from the sources. +.Gp "special target" +A target that causes PMake to do special things when it's encountered. +.Gp "suffix" +The tail end of a file name. Usually begins with a period, +.CW .c +or +.CW .ms , +e.g. +.Gp "target" +A word to the left of the operator on a dependency line. More +generally, any file that PMake might create. A file may be (and often +is) both a target and a source (what it is depends on how PMake is +looking at it at the time \*- sort of like the wave/particle duality +of light, you know). +.Gp "transformation rule" +A special construct in a makefile that specifies how to create a file +of one type from a file of another, as indicated by their suffixes. +.Gp "variable expansion" +The process of substituting the value of a variable for a reference to +it. Expansion may be altered by means of modifiers. +.Gp "variable" +A place in which to store text that may be retrieved later. Also used +to define the local environment. Conditionals exist that test whether +a variable is defined or not. +.bp +.\" Output table of contents last, with an entry for the index, making +.\" sure to save and restore the last real page number for the index... +.nr @n \n(PN+1 +.\" We are not generating an index +.\" .XS \n(@n +.\" Index +.\" .XE +.nr %% \n% +.PX +.nr % \n(%% -- cgit v1.2.1