diff options
Diffstat (limited to 'Modules')
| -rw-r--r-- | Modules/CMakeDetermineASMCompiler.cmake | 40 | ||||
| -rw-r--r-- | Modules/CMakeDetermineCCompiler.cmake | 29 | ||||
| -rw-r--r-- | Modules/CMakeDetermineCXXCompiler.cmake | 28 | ||||
| -rw-r--r-- | Modules/CMakeDetermineCompiler.cmake | 72 | ||||
| -rw-r--r-- | Modules/CMakeDetermineFortranCompiler.cmake | 47 | ||||
| -rw-r--r-- | Modules/CMakeFindEclipseCDT4.cmake | 8 | ||||
| -rw-r--r-- | Modules/CPackComponent.cmake | 386 | ||||
| -rw-r--r-- | Modules/FindBLAS.cmake | 4 | ||||
| -rw-r--r-- | Modules/FindGTK2.cmake | 2 | ||||
| -rw-r--r-- | Modules/FindKDE3.cmake | 2 | ||||
| -rw-r--r-- | Modules/FindLAPACK.cmake | 4 | ||||
| -rw-r--r-- | Modules/FindOpenSSL.cmake | 78 | ||||
| -rw-r--r-- | Modules/FindQt4.cmake | 2 | ||||
| -rw-r--r-- | Modules/FindSelfPackers.cmake | 2 | ||||
| -rw-r--r-- | Modules/Platform/CYGWIN-CXX.cmake | 7 | ||||
| -rw-r--r-- | Modules/Platform/Darwin-CXX.cmake | 7 | ||||
| -rw-r--r-- | Modules/Platform/Linux-CXX.cmake | 3 | ||||
| -rw-r--r-- | Modules/Platform/Windows-CXX.cmake | 7 | ||||
| -rw-r--r-- | Modules/SelectLibraryConfigurations.cmake | 18 |
19 files changed, 407 insertions, 339 deletions
diff --git a/Modules/CMakeDetermineASMCompiler.cmake b/Modules/CMakeDetermineASMCompiler.cmake index 0a70d0a827..7da6ac04aa 100644 --- a/Modules/CMakeDetermineASMCompiler.cmake +++ b/Modules/CMakeDetermineASMCompiler.cmake @@ -14,6 +14,8 @@ # determine the compiler to use for ASM programs +INCLUDE(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake) + IF(NOT CMAKE_ASM${ASM_DIALECT}_COMPILER) # prefer the environment variable ASM IF($ENV{ASM${ASM_DIALECT}} MATCHES ".+") @@ -22,42 +24,28 @@ IF(NOT CMAKE_ASM${ASM_DIALECT}_COMPILER) # finally list compilers to try IF("ASM${ASM_DIALECT}" STREQUAL "ASM") # the generic assembler support - - IF(CMAKE_ASM_COMPILER_INIT) - SET(CMAKE_ASM_COMPILER_LIST ${CMAKE_ASM_COMPILER_INIT}) - ELSE(CMAKE_ASM_COMPILER_INIT) - + IF(NOT CMAKE_ASM_COMPILER_INIT) IF(CMAKE_C_COMPILER) SET(CMAKE_ASM_COMPILER "${CMAKE_C_COMPILER}" CACHE FILEPATH "The ASM compiler") SET(CMAKE_ASM_COMPILER_ID "${CMAKE_C_COMPILER_ID}") ELSEIF(CMAKE_CXX_COMPILER) SET(CMAKE_ASM_COMPILER "${CMAKE_CXX_COMPILER}" CACHE FILEPATH "The ASM compiler") SET(CMAKE_ASM_COMPILER_ID "${CMAKE_CXX_COMPILER_ID}") - ELSE(CMAKE_CXX_COMPILER) + ELSE() # List all default C and CXX compilers - SET(CMAKE_ASM${ASM_DIALECT}_COMPILER_LIST ${_CMAKE_TOOLCHAIN_PREFIX}gcc ${_CMAKE_TOOLCHAIN_PREFIX}cc cl bcc xlc - ${_CMAKE_TOOLCHAIN_PREFIX}c++ ${_CMAKE_TOOLCHAIN_PREFIX}g++ CC aCC cl bcc xlC) - ENDIF(CMAKE_C_COMPILER) - - ENDIF(CMAKE_ASM_COMPILER_INIT) - - - ELSE("ASM${ASM_DIALECT}" STREQUAL "ASM") # some specific assembler "dialect" - - IF(CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT) - SET(CMAKE_ASM${ASM_DIALECT}_COMPILER_LIST ${CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT}) - ELSE(CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT) + SET(CMAKE_ASM${ASM_DIALECT}_COMPILER_LIST + ${_CMAKE_TOOLCHAIN_PREFIX}cc ${_CMAKE_TOOLCHAIN_PREFIX}gcc cl bcc xlc + CC ${_CMAKE_TOOLCHAIN_PREFIX}c++ ${_CMAKE_TOOLCHAIN_PREFIX}g++ aCC cl bcc xlC) + ENDIF() + ENDIF() + ELSE() # some specific assembler "dialect" + IF(NOT CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT) MESSAGE(FATAL_ERROR "CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT must be preset !") - ENDIF(CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT) - - ENDIF("ASM${ASM_DIALECT}" STREQUAL "ASM") - + ENDIF() + ENDIF() # Find the compiler. - IF (_CMAKE_USER_CXX_COMPILER_PATH OR _CMAKE_USER_C_COMPILER_PATH) - FIND_PROGRAM(CMAKE_ASM${ASM_DIALECT}_COMPILER NAMES ${CMAKE_ASM${ASM_DIALECT}_COMPILER_LIST} PATHS ${_CMAKE_USER_C_COMPILER_PATH} ${_CMAKE_USER_CXX_COMPILER_PATH} DOC "Assembler" NO_DEFAULT_PATH) - ENDIF (_CMAKE_USER_CXX_COMPILER_PATH OR _CMAKE_USER_C_COMPILER_PATH) - FIND_PROGRAM(CMAKE_ASM${ASM_DIALECT}_COMPILER NAMES ${CMAKE_ASM${ASM_DIALECT}_COMPILER_LIST} PATHS ${_CMAKE_TOOLCHAIN_LOCATION} DOC "Assembler") + _cmake_find_compiler(ASM${ASM_DIALECT}) ELSE(NOT CMAKE_ASM${ASM_DIALECT}_COMPILER) diff --git a/Modules/CMakeDetermineCCompiler.cmake b/Modules/CMakeDetermineCCompiler.cmake index 9028e8e069..3ce968c02d 100644 --- a/Modules/CMakeDetermineCCompiler.cmake +++ b/Modules/CMakeDetermineCCompiler.cmake @@ -31,6 +31,14 @@ # If not already set before, it also sets # _CMAKE_TOOLCHAIN_PREFIX +INCLUDE(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake) + +# Load system-specific compiler preferences for this language. +INCLUDE(Platform/${CMAKE_SYSTEM_NAME}-C OPTIONAL) +IF(NOT CMAKE_C_COMPILER_NAMES) + SET(CMAKE_C_COMPILER_NAMES cc) +ENDIF() + IF(NOT CMAKE_C_COMPILER) SET(CMAKE_C_COMPILER_INIT NOTFOUND) @@ -53,21 +61,12 @@ IF(NOT CMAKE_C_COMPILER) ENDIF(CMAKE_GENERATOR_CC) # finally list compilers to try - IF(CMAKE_C_COMPILER_INIT) - SET(CMAKE_C_COMPILER_LIST ${CMAKE_C_COMPILER_INIT}) - ELSE(CMAKE_C_COMPILER_INIT) - SET(CMAKE_C_COMPILER_LIST ${_CMAKE_TOOLCHAIN_PREFIX}gcc ${_CMAKE_TOOLCHAIN_PREFIX}cc cl bcc xlc) - ENDIF(CMAKE_C_COMPILER_INIT) - - # Find the compiler. - IF (_CMAKE_USER_CXX_COMPILER_PATH) - FIND_PROGRAM(CMAKE_C_COMPILER NAMES ${CMAKE_C_COMPILER_LIST} PATHS ${_CMAKE_USER_CXX_COMPILER_PATH} DOC "C compiler" NO_DEFAULT_PATH) - ENDIF (_CMAKE_USER_CXX_COMPILER_PATH) - FIND_PROGRAM(CMAKE_C_COMPILER NAMES ${CMAKE_C_COMPILER_LIST} DOC "C compiler") - - IF(CMAKE_C_COMPILER_INIT AND NOT CMAKE_C_COMPILER) - SET(CMAKE_C_COMPILER "${CMAKE_C_COMPILER_INIT}" CACHE FILEPATH "C compiler" FORCE) - ENDIF(CMAKE_C_COMPILER_INIT AND NOT CMAKE_C_COMPILER) + IF(NOT CMAKE_C_COMPILER_INIT) + SET(CMAKE_C_COMPILER_LIST ${_CMAKE_TOOLCHAIN_PREFIX}cc ${_CMAKE_TOOLCHAIN_PREFIX}gcc cl bcc xlc clang) + ENDIF() + + _cmake_find_compiler(C) + ELSE(NOT CMAKE_C_COMPILER) # we only get here if CMAKE_C_COMPILER was specified using -D or a pre-made CMakeCache.txt diff --git a/Modules/CMakeDetermineCXXCompiler.cmake b/Modules/CMakeDetermineCXXCompiler.cmake index 7f8f3ec8b4..0116d341ab 100644 --- a/Modules/CMakeDetermineCXXCompiler.cmake +++ b/Modules/CMakeDetermineCXXCompiler.cmake @@ -30,6 +30,14 @@ # If not already set before, it also sets # _CMAKE_TOOLCHAIN_PREFIX +INCLUDE(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake) + +# Load system-specific compiler preferences for this language. +INCLUDE(Platform/${CMAKE_SYSTEM_NAME}-CXX OPTIONAL) +IF(NOT CMAKE_CXX_COMPILER_NAMES) + SET(CMAKE_CXX_COMPILER_NAMES CC) +ENDIF() + IF(NOT CMAKE_CXX_COMPILER) SET(CMAKE_CXX_COMPILER_INIT NOTFOUND) @@ -52,21 +60,11 @@ IF(NOT CMAKE_CXX_COMPILER) ENDIF(CMAKE_GENERATOR_CXX) # finally list compilers to try - IF(CMAKE_CXX_COMPILER_INIT) - SET(CMAKE_CXX_COMPILER_LIST ${CMAKE_CXX_COMPILER_INIT}) - ELSE(CMAKE_CXX_COMPILER_INIT) - SET(CMAKE_CXX_COMPILER_LIST ${_CMAKE_TOOLCHAIN_PREFIX}c++ ${_CMAKE_TOOLCHAIN_PREFIX}g++ CC aCC cl bcc xlC) - ENDIF(CMAKE_CXX_COMPILER_INIT) - - # Find the compiler. - IF (_CMAKE_USER_C_COMPILER_PATH) - FIND_PROGRAM(CMAKE_CXX_COMPILER NAMES ${CMAKE_CXX_COMPILER_LIST} PATHS ${_CMAKE_USER_C_COMPILER_PATH} DOC "C++ compiler" NO_DEFAULT_PATH) - ENDIF (_CMAKE_USER_C_COMPILER_PATH) - FIND_PROGRAM(CMAKE_CXX_COMPILER NAMES ${CMAKE_CXX_COMPILER_LIST} DOC "C++ compiler") - - IF(CMAKE_CXX_COMPILER_INIT AND NOT CMAKE_CXX_COMPILER) - SET(CMAKE_CXX_COMPILER "${CMAKE_CXX_COMPILER_INIT}" CACHE FILEPATH "C++ compiler" FORCE) - ENDIF(CMAKE_CXX_COMPILER_INIT AND NOT CMAKE_CXX_COMPILER) + IF(NOT CMAKE_CXX_COMPILER_INIT) + SET(CMAKE_CXX_COMPILER_LIST CC ${_CMAKE_TOOLCHAIN_PREFIX}c++ ${_CMAKE_TOOLCHAIN_PREFIX}g++ aCC cl bcc xlC clang++) + ENDIF() + + _cmake_find_compiler(CXX) ELSE(NOT CMAKE_CXX_COMPILER) # we only get here if CMAKE_CXX_COMPILER was specified using -D or a pre-made CMakeCache.txt diff --git a/Modules/CMakeDetermineCompiler.cmake b/Modules/CMakeDetermineCompiler.cmake new file mode 100644 index 0000000000..2d12c07578 --- /dev/null +++ b/Modules/CMakeDetermineCompiler.cmake @@ -0,0 +1,72 @@ + +#============================================================================= +# Copyright 2004-2012 Kitware, Inc. +# +# Distributed under the OSI-approved BSD License (the "License"); +# see accompanying file Copyright.txt for details. +# +# This software is distributed WITHOUT ANY WARRANTY; without even the +# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the License for more information. +#============================================================================= +# (To distribute this file outside of CMake, substitute the full +# License text for the above reference.) + +macro(_cmake_find_compiler lang) + # Use already-enabled languages for reference. + get_property(_languages GLOBAL PROPERTY ENABLED_LANGUAGES) + list(REMOVE_ITEM _languages "${lang}") + + if(CMAKE_${lang}_COMPILER_INIT) + # Search only for the specified compiler. + set(CMAKE_${lang}_COMPILER_LIST "${CMAKE_${lang}_COMPILER_INIT}") + else() + # Re-order the compiler list with preferred vendors first. + set(_${lang}_COMPILER_LIST "${CMAKE_${lang}_COMPILER_LIST}") + set(CMAKE_${lang}_COMPILER_LIST "") + # Prefer vendors of compilers from reference languages. + foreach(l ${_languages}) + list(APPEND CMAKE_${lang}_COMPILER_LIST + ${_${lang}_COMPILER_NAMES_${CMAKE_${l}_COMPILER_ID}}) + endforeach() + # Prefer vendors based on the platform. + list(APPEND CMAKE_${lang}_COMPILER_LIST ${CMAKE_${lang}_COMPILER_NAMES}) + # Append the rest of the list and remove duplicates. + list(APPEND CMAKE_${lang}_COMPILER_LIST ${_${lang}_COMPILER_LIST}) + unset(_${lang}_COMPILER_LIST) + list(REMOVE_DUPLICATES CMAKE_${lang}_COMPILER_LIST) + if(CMAKE_${lang}_COMPILER_EXCLUDE) + list(REMOVE_ITEM CMAKE_${lang}_COMPILER_LIST + ${CMAKE_${lang}_COMPILER_EXCLUDE}) + endif() + endif() + + # Look for directories containing compilers of reference languages. + set(_${lang}_COMPILER_HINTS) + foreach(l ${_languages}) + if(CMAKE_${l}_COMPILER AND IS_ABSOLUTE "${CMAKE_${l}_COMPILER}") + get_filename_component(_hint "${CMAKE_${l}_COMPILER}" PATH) + if(IS_DIRECTORY "${_hint}") + list(APPEND _${lang}_COMPILER_HINTS "${_hint}") + endif() + unset(_hint) + endif() + endforeach() + + # Find the compiler. + if(_${lang}_COMPILER_HINTS) + # Prefer directories containing compilers of reference languages. + list(REMOVE_DUPLICATES _${lang}_COMPILER_HINTS) + find_program(CMAKE_${lang}_COMPILER + NAMES ${CMAKE_${lang}_COMPILER_LIST} + PATHS ${_${lang}_COMPILER_HINTS} + NO_DEFAULT_PATH + DOC "${lang} compiler") + endif() + find_program(CMAKE_${lang}_COMPILER NAMES ${CMAKE_${lang}_COMPILER_LIST} DOC "${lang} compiler") + if(CMAKE_${lang}_COMPILER_INIT AND NOT CMAKE_${lang}_COMPILER) + set(CMAKE_${lang}_COMPILER "${CMAKE_${lang}_COMPILER_INIT}" CACHE FILEPATH "${lang} compiler" FORCE) + endif() + unset(_${lang}_COMPILER_HINTS) + unset(_languages) +endmacro() diff --git a/Modules/CMakeDetermineFortranCompiler.cmake b/Modules/CMakeDetermineFortranCompiler.cmake index ade6d586c5..45033c2a39 100644 --- a/Modules/CMakeDetermineFortranCompiler.cmake +++ b/Modules/CMakeDetermineFortranCompiler.cmake @@ -19,6 +19,12 @@ # the cmake variable CMAKE_GENERATOR_FC which can be defined by a generator # as a default compiler +INCLUDE(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake) +INCLUDE(Platform/${CMAKE_SYSTEM_NAME}-Fortran OPTIONAL) +IF(NOT CMAKE_Fortran_COMPILER_NAMES) + SET(CMAKE_Fortran_COMPILER_NAMES f95) +ENDIF() + IF(NOT CMAKE_Fortran_COMPILER) # prefer the environment variable CC IF($ENV{FC} MATCHES ".+") @@ -40,9 +46,7 @@ IF(NOT CMAKE_Fortran_COMPILER) ENDIF(CMAKE_GENERATOR_FC) # finally list compilers to try - IF(CMAKE_Fortran_COMPILER_INIT) - SET(CMAKE_Fortran_COMPILER_LIST ${CMAKE_Fortran_COMPILER_INIT}) - ELSE(CMAKE_Fortran_COMPILER_INIT) + IF(NOT CMAKE_Fortran_COMPILER_INIT) # Known compilers: # f77/f90/f95: generic compiler names # g77: GNU Fortran 77 compiler @@ -77,41 +81,10 @@ IF(NOT CMAKE_Fortran_COMPILER) SET(_Fortran_COMPILER_NAMES_PathScale pathf2003 pathf95 pathf90) SET(_Fortran_COMPILER_NAMES_XL xlf) SET(_Fortran_COMPILER_NAMES_VisualAge xlf95 xlf90 xlf) - - # Prefer vendors matching the C and C++ compilers. - SET(CMAKE_Fortran_COMPILER_LIST - ${_Fortran_COMPILER_NAMES_${CMAKE_C_COMPILER_ID}} - ${_Fortran_COMPILER_NAMES_${CMAKE_CXX_COMPILER_ID}} - ${CMAKE_Fortran_COMPILER_LIST}) - LIST(REMOVE_DUPLICATES CMAKE_Fortran_COMPILER_LIST) - ENDIF(CMAKE_Fortran_COMPILER_INIT) - - # Look for directories containing the C and C++ compilers. - SET(_Fortran_COMPILER_HINTS) - FOREACH(lang C CXX) - IF(CMAKE_${lang}_COMPILER AND IS_ABSOLUTE "${CMAKE_${lang}_COMPILER}") - GET_FILENAME_COMPONENT(_hint "${CMAKE_${lang}_COMPILER}" PATH) - IF(IS_DIRECTORY "${_hint}") - LIST(APPEND _Fortran_COMPILER_HINTS "${_hint}") - ENDIF() - SET(_hint) - ENDIF() - ENDFOREACH() - - # Find the compiler. - IF(_Fortran_COMPILER_HINTS) - # Prefer directories containing C and C++ compilers. - LIST(REMOVE_DUPLICATES _Fortran_COMPILER_HINTS) - FIND_PROGRAM(CMAKE_Fortran_COMPILER - NAMES ${CMAKE_Fortran_COMPILER_LIST} - PATHS ${_Fortran_COMPILER_HINTS} - NO_DEFAULT_PATH - DOC "Fortran compiler") ENDIF() - FIND_PROGRAM(CMAKE_Fortran_COMPILER NAMES ${CMAKE_Fortran_COMPILER_LIST} DOC "Fortran compiler") - IF(CMAKE_Fortran_COMPILER_INIT AND NOT CMAKE_Fortran_COMPILER) - SET(CMAKE_Fortran_COMPILER "${CMAKE_Fortran_COMPILER_INIT}" CACHE FILEPATH "Fortran compiler" FORCE) - ENDIF(CMAKE_Fortran_COMPILER_INIT AND NOT CMAKE_Fortran_COMPILER) + + _cmake_find_compiler(Fortran) + ELSE(NOT CMAKE_Fortran_COMPILER) # we only get here if CMAKE_Fortran_COMPILER was specified using -D or a pre-made CMakeCache.txt # (e.g. via ctest) or set in CMAKE_TOOLCHAIN_FILE diff --git a/Modules/CMakeFindEclipseCDT4.cmake b/Modules/CMakeFindEclipseCDT4.cmake index a4264e78ee..86c1a1bc22 100644 --- a/Modules/CMakeFindEclipseCDT4.cmake +++ b/Modules/CMakeFindEclipseCDT4.cmake @@ -24,6 +24,9 @@ FUNCTION(_FIND_ECLIPSE_VERSION) GET_FILENAME_COMPONENT(_REALPATH_CMAKE_ECLIPSE_EXECUTABLE "${CMAKE_ECLIPSE_EXECUTABLE}" REALPATH) GET_FILENAME_COMPONENT(_ECLIPSE_DIR "${_REALPATH_CMAKE_ECLIPSE_EXECUTABLE}" PATH) FILE(GLOB _ECLIPSE_FEATURE_DIR "${_ECLIPSE_DIR}/features/org.eclipse.platform*") + IF(APPLE AND NOT _ECLIPSE_FEATURE_DIR) + FILE(GLOB _ECLIPSE_FEATURE_DIR "${_ECLIPSE_DIR}/../../../features/org.eclipse.platform*") + ENDIF() IF("${_ECLIPSE_FEATURE_DIR}" MATCHES ".+org.eclipse.platform_([0-9]+\\.[0-9]+).+") SET(_ECLIPSE_VERSION ${CMAKE_MATCH_1}) ENDIF() @@ -37,6 +40,7 @@ FUNCTION(_FIND_ECLIPSE_VERSION) SET(_ECLIPSE_VERSION_NAME_3.5 "Galileo" ) SET(_ECLIPSE_VERSION_NAME_3.6 "Helios" ) SET(_ECLIPSE_VERSION_NAME_3.7 "Indigo" ) + SET(_ECLIPSE_VERSION_NAME_4.2 "Juno" ) IF(_ECLIPSE_VERSION) MESSAGE(STATUS "Found Eclipse version ${_ECLIPSE_VERSION} (${_ECLIPSE_VERSION_NAME_${_ECLIPSE_VERSION}})") @@ -51,7 +55,9 @@ FUNCTION(_FIND_ECLIPSE_VERSION) "3.4 (${_ECLIPSE_VERSION_NAME_3.4})" "3.5 (${_ECLIPSE_VERSION_NAME_3.5})" "3.6 (${_ECLIPSE_VERSION_NAME_3.6})" - "3.7 (${_ECLIPSE_VERSION_NAME_3.7})") + "3.7 (${_ECLIPSE_VERSION_NAME_3.7})" + "4.2 (${_ECLIPSE_VERSION_NAME_4.2})" + ) ENDFUNCTION() _FIND_ECLIPSE_VERSION() diff --git a/Modules/CPackComponent.cmake b/Modules/CPackComponent.cmake index 15987030ef..dce34bf3a4 100644 --- a/Modules/CPackComponent.cmake +++ b/Modules/CPackComponent.cmake @@ -28,31 +28,31 @@ ##variable # CPACK_COMPONENTS_ALL - The list of component to install. # -# The default value of this variable is computed by CPack -# and contains all components defined by the project. The -# user may set it to only include the specified components. +#The default value of this variable is computed by CPack +#and contains all components defined by the project. The +#user may set it to only include the specified components. ##end # ##variable # CPACK_<GENNAME>_COMPONENT_INSTALL - Enable/Disable component install for # CPack generator <GENNAME>. # -# Each CPack Generator (RPM, DEB, ARCHIVE, NSIS, DMG, etc...) has a legacy -# default behavior. e.g. RPM builds monolithic whereas NSIS builds component. -# One can change the default behavior by setting this variable to 0/1 or OFF/ON. +#Each CPack Generator (RPM, DEB, ARCHIVE, NSIS, DMG, etc...) has a legacy +#default behavior. e.g. RPM builds monolithic whereas NSIS builds component. +#One can change the default behavior by setting this variable to 0/1 or OFF/ON. ##end ##variable # CPACK_COMPONENTS_GROUPING - Specify how components are grouped for multi-package # component-aware CPack generators. # -# Some generators like RPM or ARCHIVE family (TGZ, ZIP, ...) generates several -# packages files when asked for component packaging. They group the component -# differently depending on the value of this variable: -# - ONE_PER_GROUP (default): creates one package file per component group -# - ALL_COMPONENTS_IN_ONE : creates a single package with all (requested) component -# - IGNORE : creates one package per component, i.e. IGNORE component group -# One can specify different grouping for different CPack generator by using -# a CPACK_PROJECT_CONFIG_FILE. +#Some generators like RPM or ARCHIVE family (TGZ, ZIP, ...) generates several +#packages files when asked for component packaging. They group the component +#differently depending on the value of this variable: +# - ONE_PER_GROUP (default): creates one package file per component group +# - ALL_COMPONENTS_IN_ONE : creates a single package with all (requested) component +# - IGNORE : creates one package per component, i.e. IGNORE component group +#One can specify different grouping for different CPack generator by using +#a CPACK_PROJECT_CONFIG_FILE. ##end ##variable # CPACK_COMPONENT_<compName>_DISPLAY_NAME - The name to be displayed for a component. @@ -71,194 +71,194 @@ # CPACK_COMPONENT_<compName>_REQUIRED - True is this component is required. ##end ##macro -# cpack_add_component - Describes a CPack installation component -# named by the COMPONENT argument to a CMake INSTALL command. -# -# cpack_add_component(compname -# [DISPLAY_NAME name] -# [DESCRIPTION description] -# [HIDDEN | REQUIRED | DISABLED ] -# [GROUP group] -# [DEPENDS comp1 comp2 ... ] -# [INSTALL_TYPES type1 type2 ... ] -# [DOWNLOADED] -# [ARCHIVE_FILE filename]) -# -# The cmake_add_component command describes an installation -# component, which the user can opt to install or remove as part of -# the graphical installation process. compname is the name of the -# component, as provided to the COMPONENT argument of one or more -# CMake INSTALL commands. -# -# DISPLAY_NAME is the displayed name of the component, used in -# graphical installers to display the component name. This value can -# be any string. -# -# DESCRIPTION is an extended description of the component, used in -# graphical installers to give the user additional information about -# the component. Descriptions can span multiple lines using "\n" as -# the line separator. Typically, these descriptions should be no -# more than a few lines long. -# -# HIDDEN indicates that this component will be hidden in the -# graphical installer, so that the user cannot directly change -# whether it is installed or not. -# -# REQUIRED indicates that this component is required, and therefore -# will always be installed. It will be visible in the graphical -# installer, but it cannot be unselected. (Typically, required -# components are shown greyed out). -# -# DISABLED indicates that this component should be disabled -# (unselected) by default. The user is free to select this component -# for installation, unless it is also HIDDEN. -# -# DEPENDS lists the components on which this component depends. If -# this component is selected, then each of the components listed -# must also be selected. The dependency information is encoded -# within the installer itself, so that users cannot install -# inconsitent sets of components. -# -# GROUP names the component group of which this component is a -# part. If not provided, the component will be a standalone -# component, not part of any component group. Component groups are -# described with the cpack_add_component_group command, detailed -# below. -# -# INSTALL_TYPES lists the installation types of which this component -# is a part. When one of these installations types is selected, this -# component will automatically be selected. Installation types are -# described with the cpack_add_install_type command, detailed below. -# -# DOWNLOADED indicates that this component should be downloaded -# on-the-fly by the installer, rather than packaged in with the -# installer itself. For more information, see the cpack_configure_downloads -# command. -# -# ARCHIVE_FILE provides a name for the archive file created by CPack -# to be used for downloaded components. If not supplied, CPack will -# create a file with some name based on CPACK_PACKAGE_FILE_NAME and -# the name of the component. See cpack_configure_downloads for more -# information. +#cpack_add_component - Describes a CPack installation component +#named by the COMPONENT argument to a CMake INSTALL command. +# +# cpack_add_component(compname +# [DISPLAY_NAME name] +# [DESCRIPTION description] +# [HIDDEN | REQUIRED | DISABLED ] +# [GROUP group] +# [DEPENDS comp1 comp2 ... ] +# [INSTALL_TYPES type1 type2 ... ] +# [DOWNLOADED] +# [ARCHIVE_FILE filename]) +# +#The cmake_add_component command describes an installation +#component, which the user can opt to install or remove as part of +#the graphical installation process. compname is the name of the +#component, as provided to the COMPONENT argument of one or more +#CMake INSTALL commands. +# +#DISPLAY_NAME is the displayed name of the component, used in +#graphical installers to display the component name. This value can +#be any string. +# +#DESCRIPTION is an extended description of the component, used in +#graphical installers to give the user additional information about +#the component. Descriptions can span multiple lines using "\n" as +#the line separator. Typically, these descriptions should be no +#more than a few lines long. +# +#HIDDEN indicates that this component will be hidden in the +#graphical installer, so that the user cannot directly change +#whether it is installed or not. +# +#REQUIRED indicates that this component is required, and therefore +#will always be installed. It will be visible in the graphical +#installer, but it cannot be unselected. (Typically, required +#components are shown greyed out). +# +#DISABLED indicates that this component should be disabled +#(unselected) by default. The user is free to select this component +#for installation, unless it is also HIDDEN. +# +#DEPENDS lists the components on which this component depends. If +#this component is selected, then each of the components listed +#must also be selected. The dependency information is encoded +#within the installer itself, so that users cannot install +#inconsistent sets of components. +# +#GROUP names the component group of which this component is a +#part. If not provided, the component will be a standalone +#component, not part of any component group. Component groups are +#described with the cpack_add_component_group command, detailed +#below. +# +#INSTALL_TYPES lists the installation types of which this component +#is a part. When one of these installations types is selected, this +#component will automatically be selected. Installation types are +#described with the cpack_add_install_type command, detailed below. +# +#DOWNLOADED indicates that this component should be downloaded +#on-the-fly by the installer, rather than packaged in with the +#installer itself. For more information, see the cpack_configure_downloads +# command. +# +#ARCHIVE_FILE provides a name for the archive file created by CPack +#to be used for downloaded components. If not supplied, CPack will +#create a file with some name based on CPACK_PACKAGE_FILE_NAME and +#the name of the component. See cpack_configure_downloads for more +#information. ##end # ##macro -# cpack_add_component_group - Describes a group of related CPack -# installation components. -# -# cpack_add_component_group(groupname -# [DISPLAY_NAME name] -# [DESCRIPTION description] -# [PARENT_GROUP parent] -# [EXPANDED] -# [BOLD_TITLE]) -# -# The cpack_add_component_group describes a group of installation -# components, which will be placed together within the listing of -# options. Typically, component groups allow the user to -# select/deselect all of the components within a single group via a -# single group-level option. Use component groups to reduce the -# complexity of installers with many options. groupname is an -# arbitrary name used to identify the group in the GROUP argument of -# the cpack_add_component command, which is used to place a -# component in a group. The name of the group must not conflict with -# the name of any component. -# -# DISPLAY_NAME is the displayed name of the component group, used in -# graphical installers to display the component group name. This -# value can be any string. -# -# DESCRIPTION is an extended description of the component group, -# used in graphical installers to give the user additional -# information about the components within that group. Descriptions -# can span multiple lines using "\n" as the line -# separator. Typically, these descriptions should be no more than a -# few lines long. -# -# PARENT_GROUP, if supplied, names the parent group of this group. -# Parent groups are used to establish a hierarchy of groups, -# providing an arbitrary hierarchy of groups. -# -# EXPANDED indicates that, by default, the group should show up as -# "expanded", so that the user immediately sees all of the -# components within the group. Otherwise, the group will initially -# show up as a single entry. -# -# BOLD_TITLE indicates that the group title should appear in bold, -# to call the user's attention to the group. +#cpack_add_component_group - Describes a group of related CPack +#installation components. +# +# cpack_add_component_group(groupname +# [DISPLAY_NAME name] +# [DESCRIPTION description] +# [PARENT_GROUP parent] +# [EXPANDED] +# [BOLD_TITLE]) +# +#The cpack_add_component_group describes a group of installation +#components, which will be placed together within the listing of +#options. Typically, component groups allow the user to +#select/deselect all of the components within a single group via a +#single group-level option. Use component groups to reduce the +#complexity of installers with many options. groupname is an +#arbitrary name used to identify the group in the GROUP argument of +#the cpack_add_component command, which is used to place a +#component in a group. The name of the group must not conflict with +#the name of any component. +# +#DISPLAY_NAME is the displayed name of the component group, used in +#graphical installers to display the component group name. This +#value can be any string. +# +#DESCRIPTION is an extended description of the component group, +#used in graphical installers to give the user additional +#information about the components within that group. Descriptions +#can span multiple lines using "\n" as the line +#separator. Typically, these descriptions should be no more than a +#few lines long. +# +#PARENT_GROUP, if supplied, names the parent group of this group. +#Parent groups are used to establish a hierarchy of groups, +#providing an arbitrary hierarchy of groups. +# +#EXPANDED indicates that, by default, the group should show up as +#"expanded", so that the user immediately sees all of the +#components within the group. Otherwise, the group will initially +#show up as a single entry. +# +#BOLD_TITLE indicates that the group title should appear in bold, +#to call the user's attention to the group. ##end # ##macro -# cpack_add_install_type - Add a new installation type containing a -# set of predefined component selections to the graphical installer. -# -# cpack_add_install_type(typename -# [DISPLAY_NAME name]) -# -# The cpack_add_install_type command identifies a set of preselected -# components that represents a common use case for an -# application. For example, a "Developer" install type might include -# an application along with its header and library files, while an -# "End user" install type might just include the application's -# executable. Each component identifies itself with one or more -# install types via the INSTALL_TYPES argument to -# cpack_add_component. -# -# DISPLAY_NAME is the displayed name of the install type, which will -# typically show up in a drop-down box within a graphical -# installer. This value can be any string. +#cpack_add_install_type - Add a new installation type containing a +#set of predefined component selections to the graphical installer. +# +# cpack_add_install_type(typename +# [DISPLAY_NAME name]) +# +#The cpack_add_install_type command identifies a set of preselected +#components that represents a common use case for an +#application. For example, a "Developer" install type might include +#an application along with its header and library files, while an +#"End user" install type might just include the application's +#executable. Each component identifies itself with one or more +#install types via the INSTALL_TYPES argument to +#cpack_add_component. +# +#DISPLAY_NAME is the displayed name of the install type, which will +#typically show up in a drop-down box within a graphical +#installer. This value can be any string. ##end # ##macro -# cpack_configure_downloads - Configure CPack to download selected -# components on-the-fly as part of the installation process. -# -# cpack_configure_downloads(site -# [UPLOAD_DIRECTORY dirname] -# [ALL] -# [ADD_REMOVE|NO_ADD_REMOVE]) -# -# The cpack_configure_downloads command configures installation-time -# downloads of selected components. For each downloadable component, -# CPack will create an archive containing the contents of that -# component, which should be uploaded to the given site. When the -# user selects that component for installation, the installer will -# download and extract the component in place. This feature is -# useful for creating small installers that only download the -# requested components, saving bandwidth. Additionally, the -# installers are small enough that they will be installed as part of -# the normal installation process, and the "Change" button in -# Windows Add/Remove Programs control panel will allow one to add or -# remove parts of the application after the original -# installation. On Windows, the downloaded-components functionality -# requires the ZipDLL plug-in for NSIS, available at: -# -# http://nsis.sourceforge.net/ZipDLL_plug-in -# -# On Mac OS X, installers that download components on-the-fly can -# only be built and installed on system using Mac OS X 10.5 or -# later. -# -# The site argument is a URL where the archives for downloadable -# components will reside, e.g., http://www.cmake.org/files/2.6.1/installer/ -# All of the archives produced by CPack should be uploaded to that location. -# -# UPLOAD_DIRECTORY is the local directory where CPack will create the -# various archives for each of the components. The contents of this -# directory should be uploaded to a location accessible by the URL given -# in the site argument. If omitted, CPack will use the directory -# CPackUploads inside the CMake binary directory to store the generated -# archives. -# -# The ALL flag indicates that all components be downloaded. Otherwise, only -# those components explicitly marked as DOWNLOADED or that have a specified -# ARCHIVE_FILE will be downloaded. Additionally, the ALL option implies -# ADD_REMOVE (unless NO_ADD_REMOVE is specified). -# -# ADD_REMOVE indicates that CPack should install a copy of the installer -# that can be called from Windows' Add/Remove Programs dialog (via the -# "Modify" button) to change the set of installed components. NO_ADD_REMOVE -# turns off this behavior. This option is ignored on Mac OS X. +#cpack_configure_downloads - Configure CPack to download selected +#components on-the-fly as part of the installation process. +# +# cpack_configure_downloads(site +# [UPLOAD_DIRECTORY dirname] +# [ALL] +# [ADD_REMOVE|NO_ADD_REMOVE]) +# +#The cpack_configure_downloads command configures installation-time +#downloads of selected components. For each downloadable component, +#CPack will create an archive containing the contents of that +#component, which should be uploaded to the given site. When the +#user selects that component for installation, the installer will +#download and extract the component in place. This feature is +#useful for creating small installers that only download the +#requested components, saving bandwidth. Additionally, the +#installers are small enough that they will be installed as part of +#the normal installation process, and the "Change" button in +#Windows Add/Remove Programs control panel will allow one to add or +#remove parts of the application after the original +#installation. On Windows, the downloaded-components functionality +#requires the ZipDLL plug-in for NSIS, available at: +# +# http://nsis.sourceforge.net/ZipDLL_plug-in +# +#On Mac OS X, installers that download components on-the-fly can +#only be built and installed on system using Mac OS X 10.5 or +#later. +# +#The site argument is a URL where the archives for downloadable +#components will reside, e.g., http://www.cmake.org/files/2.6.1/installer/ +#All of the archives produced by CPack should be uploaded to that location. +# +#UPLOAD_DIRECTORY is the local directory where CPack will create the +#various archives for each of the components. The contents of this +#directory should be uploaded to a location accessible by the URL given +#in the site argument. If omitted, CPack will use the directory +#CPackUploads inside the CMake binary directory to store the generated +#archives. +# +#The ALL flag indicates that all components be downloaded. Otherwise, only +#those components explicitly marked as DOWNLOADED or that have a specified +#ARCHIVE_FILE will be downloaded. Additionally, the ALL option implies +#ADD_REMOVE (unless NO_ADD_REMOVE is specified). +# +#ADD_REMOVE indicates that CPack should install a copy of the installer +#that can be called from Windows' Add/Remove Programs dialog (via the +#"Modify" button) to change the set of installed components. NO_ADD_REMOVE +#turns off this behavior. This option is ignored on Mac OS X. ##endmacro #============================================================================= diff --git a/Modules/FindBLAS.cmake b/Modules/FindBLAS.cmake index 1cf31c4a67..84bc7bb349 100644 --- a/Modules/FindBLAS.cmake +++ b/Modules/FindBLAS.cmake @@ -81,9 +81,9 @@ if (NOT _libdir) if (WIN32) set(_libdir ENV LIB) elseif (APPLE) - set(_libdir /usr/local/lib /usr/lib /usr/local/lib64 /usr/lib64 ENV DYLD_LIBRARY_PATH) + set(_libdir ENV DYLD_LIBRARY_PATH) else () - set(_libdir /usr/local/lib /usr/lib /usr/local/lib64 /usr/lib64 ENV LD_LIBRARY_PATH) + set(_libdir ENV LD_LIBRARY_PATH) endif () endif () diff --git a/Modules/FindGTK2.cmake b/Modules/FindGTK2.cmake index a03c023e44..5fe52134ac 100644 --- a/Modules/FindGTK2.cmake +++ b/Modules/FindGTK2.cmake @@ -305,9 +305,7 @@ function(_GTK2_FIND_LIBRARY _var _lib _expand_vc _append_version) NAMES ${_lib_list} PATHS /opt/gnome/lib - /opt/gnome/lib64 /usr/openwin/lib - /usr/openwin/lib64 /sw/lib $ENV{GTKMM_BASEPATH}/lib [HKEY_CURRENT_USER\\SOFTWARE\\gtkmm\\2.4;Path]/lib diff --git a/Modules/FindKDE3.cmake b/Modules/FindKDE3.cmake index 9d1081405e..ca3dae646e 100644 --- a/Modules/FindKDE3.cmake +++ b/Modules/FindKDE3.cmake @@ -131,7 +131,7 @@ ENDIF(KDECONFIG_EXECUTABLE) -# at first the KDE include direcory +# at first the KDE include directory # kpassdlg.h comes from kdeui and doesn't exist in KDE4 anymore FIND_PATH(KDE3_INCLUDE_DIR kpassdlg.h HINTS diff --git a/Modules/FindLAPACK.cmake b/Modules/FindLAPACK.cmake index 0ae98dfa7b..b867f21333 100644 --- a/Modules/FindLAPACK.cmake +++ b/Modules/FindLAPACK.cmake @@ -69,9 +69,9 @@ if (NOT _libdir) if (WIN32) set(_libdir ENV LIB) elseif (APPLE) - set(_libdir /usr/local/lib /usr/lib /usr/local/lib64 /usr/lib64 ENV DYLD_LIBRARY_PATH) + set(_libdir ENV DYLD_LIBRARY_PATH) else () - set(_libdir /usr/local/lib /usr/lib /usr/local/lib64 /usr/lib64 ENV LD_LIBRARY_PATH) + set(_libdir ENV LD_LIBRARY_PATH) endif () endif () foreach(_library ${_list}) diff --git a/Modules/FindOpenSSL.cmake b/Modules/FindOpenSSL.cmake index d1fc2d2597..6642915ce2 100644 --- a/Modules/FindOpenSSL.cmake +++ b/Modules/FindOpenSSL.cmake @@ -29,25 +29,34 @@ if (UNIX) pkg_check_modules(_OPENSSL QUIET openssl) endif (UNIX) -# http://www.slproweb.com/products/Win32OpenSSL.html -SET(_OPENSSL_ROOT_HINTS - $ENV{OPENSSL_ROOT_DIR} - ${OPENSSL_ROOT_DIR} - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\OpenSSL (32-bit)_is1;Inno Setup: App Path]" - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\OpenSSL (64-bit)_is1;Inno Setup: App Path]" - ) -SET(_OPENSSL_ROOT_PATHS - "$ENV{PROGRAMFILES}/OpenSSL" - "$ENV{PROGRAMFILES}/OpenSSL-Win32" - "$ENV{PROGRAMFILES}/OpenSSL-Win64" - "C:/OpenSSL/" - "C:/OpenSSL-Win32/" - "C:/OpenSSL-Win64/" - ) -SET(_OPENSSL_ROOT_HINTS_AND_PATHS - HINTS ${_OPENSSL_ROOT_HINTS} - PATHS ${_OPENSSL_ROOT_PATHS} - ) +IF (WIN32) + # http://www.slproweb.com/products/Win32OpenSSL.html + SET(_OPENSSL_ROOT_HINTS + ${OPENSSL_ROOT_DIR} + "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\OpenSSL (32-bit)_is1;Inno Setup: App Path]" + "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\OpenSSL (64-bit)_is1;Inno Setup: App Path]" + ENV OPENSSL_ROOT_DIR + ) + FILE(TO_CMAKE_PATH "$ENV{PROGRAMFILES}" _programfiles) + SET(_OPENSSL_ROOT_PATHS + "${_programfiles}/OpenSSL" + "${_programfiles}/OpenSSL-Win32" + "${_programfiles}/OpenSSL-Win64" + "C:/OpenSSL/" + "C:/OpenSSL-Win32/" + "C:/OpenSSL-Win64/" + ) + UNSET(_programfiles) + SET(_OPENSSL_ROOT_HINTS_AND_PATHS + HINTS ${_OPENSSL_ROOT_HINTS} + PATHS ${_OPENSSL_ROOT_PATHS} + ) +ELSE () + SET(_OPENSSL_ROOT_HINTS + ${OPENSSL_ROOT_DIR} + ENV OPENSSL_ROOT_DIR + ) +ENDIF () FIND_PATH(OPENSSL_INCLUDE_DIR NAMES @@ -60,7 +69,6 @@ FIND_PATH(OPENSSL_INCLUDE_DIR ) IF(WIN32 AND NOT CYGWIN) - # MINGW should go here too IF(MSVC) # /MD and /MDd are the standard values - if someone wants to use # others, the libnames have to change here too @@ -79,7 +87,6 @@ IF(WIN32 AND NOT CYGWIN) FIND_LIBRARY(LIB_EAY_DEBUG NAMES libeay32MDd - libeay32 ${_OPENSSL_ROOT_HINTS_AND_PATHS} PATH_SUFFIXES "lib" @@ -101,8 +108,6 @@ IF(WIN32 AND NOT CYGWIN) FIND_LIBRARY(SSL_EAY_DEBUG NAMES ssleay32MDd - ssleay32 - ssl ${_OPENSSL_ROOT_HINTS_AND_PATHS} PATH_SUFFIXES "lib" @@ -122,21 +127,22 @@ IF(WIN32 AND NOT CYGWIN) "lib/VC" ) - if( CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE ) - set( OPENSSL_LIBRARIES - optimized ${SSL_EAY_RELEASE} debug ${SSL_EAY_DEBUG} - optimized ${LIB_EAY_RELEASE} debug ${LIB_EAY_DEBUG} - ) - else() - set( OPENSSL_LIBRARIES ${SSL_EAY_RELEASE} ${LIB_EAY_RELEASE} ) - endif() - MARK_AS_ADVANCED(SSL_EAY_DEBUG SSL_EAY_RELEASE) - MARK_AS_ADVANCED(LIB_EAY_DEBUG LIB_EAY_RELEASE) + include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake) + select_library_configurations(LIB_EAY) + select_library_configurations(SSL_EAY) + + set( OPENSSL_LIBRARIES ${SSL_EAY_LIBRARY} ${LIB_EAY_LIBRARY} ) ELSEIF(MINGW) # same player, for MingW + SET(LIB_EAY_NAMES libeay32) + SET(SSL_EAY_NAMES ssleay32) + IF(CMAKE_CROSS_COMPILING) + LIST(APPEND LIB_EAY_NAMES crypto) + LIST(APPEND SSL_EAY_NAMES ssl) + ENDIF() FIND_LIBRARY(LIB_EAY NAMES - libeay32 + ${LIB_EAY_NAMES} ${_OPENSSL_ROOT_HINTS_AND_PATHS} PATH_SUFFIXES "lib" @@ -145,7 +151,7 @@ IF(WIN32 AND NOT CYGWIN) FIND_LIBRARY(SSL_EAY NAMES - ssleay32 + ${SSL_EAY_NAMES} ${_OPENSSL_ROOT_HINTS_AND_PATHS} PATH_SUFFIXES "lib" @@ -154,6 +160,8 @@ IF(WIN32 AND NOT CYGWIN) MARK_AS_ADVANCED(SSL_EAY LIB_EAY) set( OPENSSL_LIBRARIES ${SSL_EAY} ${LIB_EAY} ) + unset(LIB_EAY_NAMES) + unset(SSL_EAY_NAMES) ELSE(MSVC) # Not sure what to pick for -say- intel, let's use the toplevel ones and hope someone report issues: FIND_LIBRARY(LIB_EAY diff --git a/Modules/FindQt4.cmake b/Modules/FindQt4.cmake index 2f1708d70e..d157dabaac 100644 --- a/Modules/FindQt4.cmake +++ b/Modules/FindQt4.cmake @@ -70,7 +70,7 @@ # # macro QT4_WRAP_CPP(outfiles inputfile ... OPTIONS ...) # create moc code from a list of files containing Qt class with -# the Q_OBJECT declaration. Per-direcotry preprocessor definitions +# the Q_OBJECT declaration. Per-directory preprocessor definitions # are also added. Options may be given to moc, such as those found # when executing "moc -help". # diff --git a/Modules/FindSelfPackers.cmake b/Modules/FindSelfPackers.cmake index ffca842003..d9dc25c26f 100644 --- a/Modules/FindSelfPackers.cmake +++ b/Modules/FindSelfPackers.cmake @@ -1,5 +1,5 @@ # - Find upx -# This module looks for some executable packers (i.e. softwares that +# This module looks for some executable packers (i.e. software that # compress executables or shared libs into on-the-fly self-extracting # executables or shared libs. # Examples: diff --git a/Modules/Platform/CYGWIN-CXX.cmake b/Modules/Platform/CYGWIN-CXX.cmake new file mode 100644 index 0000000000..bf37f79030 --- /dev/null +++ b/Modules/Platform/CYGWIN-CXX.cmake @@ -0,0 +1,7 @@ +if(NOT CMAKE_CXX_COMPILER_NAMES) + set(CMAKE_CXX_COMPILER_NAMES c++) +endif() + +# Exclude C++ compilers differing from C compiler only by case +# because this platform may have a case-insensitive filesystem. +set(CMAKE_CXX_COMPILER_EXCLUDE CC aCC xlC) diff --git a/Modules/Platform/Darwin-CXX.cmake b/Modules/Platform/Darwin-CXX.cmake new file mode 100644 index 0000000000..bf37f79030 --- /dev/null +++ b/Modules/Platform/Darwin-CXX.cmake @@ -0,0 +1,7 @@ +if(NOT CMAKE_CXX_COMPILER_NAMES) + set(CMAKE_CXX_COMPILER_NAMES c++) +endif() + +# Exclude C++ compilers differing from C compiler only by case +# because this platform may have a case-insensitive filesystem. +set(CMAKE_CXX_COMPILER_EXCLUDE CC aCC xlC) diff --git a/Modules/Platform/Linux-CXX.cmake b/Modules/Platform/Linux-CXX.cmake new file mode 100644 index 0000000000..b594daeb0b --- /dev/null +++ b/Modules/Platform/Linux-CXX.cmake @@ -0,0 +1,3 @@ +if(NOT CMAKE_CXX_COMPILER_NAMES) + set(CMAKE_CXX_COMPILER_NAMES c++) +endif() diff --git a/Modules/Platform/Windows-CXX.cmake b/Modules/Platform/Windows-CXX.cmake new file mode 100644 index 0000000000..bf37f79030 --- /dev/null +++ b/Modules/Platform/Windows-CXX.cmake @@ -0,0 +1,7 @@ +if(NOT CMAKE_CXX_COMPILER_NAMES) + set(CMAKE_CXX_COMPILER_NAMES c++) +endif() + +# Exclude C++ compilers differing from C compiler only by case +# because this platform may have a case-insensitive filesystem. +set(CMAKE_CXX_COMPILER_EXCLUDE CC aCC xlC) diff --git a/Modules/SelectLibraryConfigurations.cmake b/Modules/SelectLibraryConfigurations.cmake index 2e8ade0dfa..dbff4876b1 100644 --- a/Modules/SelectLibraryConfigurations.cmake +++ b/Modules/SelectLibraryConfigurations.cmake @@ -48,17 +48,19 @@ macro( select_library_configurations basename ) # if only the debug version was found, set the release value to be the # debug value. _set_library_name( ${basename} DEBUG RELEASE ) - if (${basename}_LIBRARY_DEBUG AND ${basename}_LIBRARY_RELEASE AND - NOT ${basename}_LIBRARY_DEBUG STREQUAL ${basename}_LIBRARY_RELEASE) + if( ${basename}_LIBRARY_DEBUG AND ${basename}_LIBRARY_RELEASE AND + NOT ${basename}_LIBRARY_DEBUG STREQUAL ${basename}_LIBRARY_RELEASE ) # if the generator supports configuration types or CMAKE_BUILD_TYPE # is set, then set optimized and debug options. if( CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE ) - set( ${basename}_LIBRARY - optimized ${${basename}_LIBRARY_RELEASE} - debug ${${basename}_LIBRARY_DEBUG} ) - set( ${basename}_LIBRARIES - optimized ${${basename}_LIBRARY_RELEASE} - debug ${${basename}_LIBRARY_DEBUG} ) + set( ${basename}_LIBRARY ) + foreach( _libname LISTS ${basename}_LIBRARY_RELEASE ) + list( APPEND ${basename}_LIBRARY optimized "${_libname}" ) + endforeach() + foreach( _libname LISTS ${basename}_LIBRARY_DEBUG ) + list( APPEND ${basename}_LIBRARY debug "${_libname}" ) + endforeach() + set( ${basename}_LIBRARIES "${${basename}_LIBRARY}" ) else( CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE ) # If there are no configuration types or build type, just use # the release version |