diff options
Diffstat (limited to 'Utilities/cmcurl/lib/urldata.h')
| -rw-r--r-- | Utilities/cmcurl/lib/urldata.h | 1984 |
1 files changed, 1984 insertions, 0 deletions
diff --git a/Utilities/cmcurl/lib/urldata.h b/Utilities/cmcurl/lib/urldata.h new file mode 100644 index 0000000000..3d7545c689 --- /dev/null +++ b/Utilities/cmcurl/lib/urldata.h @@ -0,0 +1,1984 @@ +#ifndef HEADER_CURL_URLDATA_H +#define HEADER_CURL_URLDATA_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + * SPDX-License-Identifier: curl + * + ***************************************************************************/ + +/* This file is for lib internal stuff */ + +#include "curl_setup.h" + +#define PORT_FTP 21 +#define PORT_FTPS 990 +#define PORT_TELNET 23 +#define PORT_HTTP 80 +#define PORT_HTTPS 443 +#define PORT_DICT 2628 +#define PORT_LDAP 389 +#define PORT_LDAPS 636 +#define PORT_TFTP 69 +#define PORT_SSH 22 +#define PORT_IMAP 143 +#define PORT_IMAPS 993 +#define PORT_POP3 110 +#define PORT_POP3S 995 +#define PORT_SMB 445 +#define PORT_SMBS 445 +#define PORT_SMTP 25 +#define PORT_SMTPS 465 /* sometimes called SSMTP */ +#define PORT_RTSP 554 +#define PORT_RTMP 1935 +#define PORT_RTMPT PORT_HTTP +#define PORT_RTMPS PORT_HTTPS +#define PORT_GOPHER 70 +#define PORT_MQTT 1883 + +#ifdef USE_WEBSOCKETS +/* CURLPROTO_GOPHERS (29) is the highest publicly used protocol bit number, + * the rest are internal information. If we use higher bits we only do this on + * platforms that have a >= 64 bit type and then we use such a type for the + * protocol fields in the protocol handler. + */ +#define CURLPROTO_WS (1<<30) +#define CURLPROTO_WSS ((curl_prot_t)1<<31) +#else +#define CURLPROTO_WS 0 +#define CURLPROTO_WSS 0 +#endif + +/* This should be undefined once we need bit 32 or higher */ +#define PROTO_TYPE_SMALL + +#ifndef PROTO_TYPE_SMALL +typedef curl_off_t curl_prot_t; +#else +typedef unsigned int curl_prot_t; +#endif + +/* This mask is for all the old protocols that are provided and defined in the + public header and shall exclude protocols added since which are not exposed + in the API */ +#define CURLPROTO_MASK (0x3ffffff) + +#define DICT_MATCH "/MATCH:" +#define DICT_MATCH2 "/M:" +#define DICT_MATCH3 "/FIND:" +#define DICT_DEFINE "/DEFINE:" +#define DICT_DEFINE2 "/D:" +#define DICT_DEFINE3 "/LOOKUP:" + +#define CURL_DEFAULT_USER "anonymous" +#define CURL_DEFAULT_PASSWORD "ftp@example.com" + +/* Convenience defines for checking protocols or their SSL based version. Each + protocol handler should only ever have a single CURLPROTO_ in its protocol + field. */ +#define PROTO_FAMILY_HTTP (CURLPROTO_HTTP|CURLPROTO_HTTPS|CURLPROTO_WS| \ + CURLPROTO_WSS) +#define PROTO_FAMILY_FTP (CURLPROTO_FTP|CURLPROTO_FTPS) +#define PROTO_FAMILY_POP3 (CURLPROTO_POP3|CURLPROTO_POP3S) +#define PROTO_FAMILY_SMB (CURLPROTO_SMB|CURLPROTO_SMBS) +#define PROTO_FAMILY_SMTP (CURLPROTO_SMTP|CURLPROTO_SMTPS) +#define PROTO_FAMILY_SSH (CURLPROTO_SCP|CURLPROTO_SFTP) + +#define DEFAULT_CONNCACHE_SIZE 5 + +/* length of longest IPv6 address string including the trailing null */ +#define MAX_IPADR_LEN sizeof("ffff:ffff:ffff:ffff:ffff:ffff:255.255.255.255") + +/* Default FTP/IMAP etc response timeout in milliseconds */ +#define RESP_TIMEOUT (120*1000) + +/* Max string input length is a precaution against abuse and to detect junk + input easier and better. */ +#define CURL_MAX_INPUT_LENGTH 8000000 + +/* Macros intended for DEBUGF logging, use like: + * DEBUGF(infof(data, CFMSG(cf, "this filter %s rocks"), "very much")); + * and it will output: + * [CONN-1-0][CF-SSL] this filter very much rocks + * on connection #1 with sockindex 0 for filter of type "SSL". */ +#define DMSG(d,msg) \ + "[CONN-%ld] "msg, (d)->conn->connection_id +#define DMSGI(d,i,msg) \ + "[CONN-%ld-%d] "msg, (d)->conn->connection_id, (i) +#define CMSG(c,msg) \ + "[CONN-%ld] "msg, (conn)->connection_id +#define CMSGI(c,i,msg) \ + "[CONN-%ld-%d] "msg, (conn)->connection_id, (i) +#define CFMSG(cf,msg) \ + "[CONN-%ld-%d][CF-%s] "msg, (cf)->conn->connection_id, \ + (cf)->sockindex, (cf)->cft->name + + +#include "cookie.h" +#include "psl.h" +#include "formdata.h" + +#ifdef HAVE_NETINET_IN_H +#include <netinet/in.h> +#endif +#ifdef HAVE_NETINET_IN6_H +#include <netinet/in6.h> +#endif + +#include "timeval.h" + +#include <curl/curl.h> + +#include "http_chunks.h" /* for the structs and enum stuff */ +#include "hostip.h" +#include "hash.h" +#include "splay.h" +#include "dynbuf.h" + +/* return the count of bytes sent, or -1 on error */ +typedef ssize_t (Curl_send)(struct Curl_easy *data, /* transfer */ + int sockindex, /* socketindex */ + const void *buf, /* data to write */ + size_t len, /* max amount to write */ + CURLcode *err); /* error to return */ + +/* return the count of bytes read, or -1 on error */ +typedef ssize_t (Curl_recv)(struct Curl_easy *data, /* transfer */ + int sockindex, /* socketindex */ + char *buf, /* store data here */ + size_t len, /* max amount to read */ + CURLcode *err); /* error to return */ + +#ifdef USE_HYPER +typedef CURLcode (*Curl_datastream)(struct Curl_easy *data, + struct connectdata *conn, + int *didwhat, + bool *done, + int select_res); +#endif + +#include "mime.h" +#include "imap.h" +#include "pop3.h" +#include "smtp.h" +#include "ftp.h" +#include "file.h" +#include "vssh/ssh.h" +#include "http.h" +#include "rtsp.h" +#include "smb.h" +#include "mqtt.h" +#include "wildcard.h" +#include "multihandle.h" +#include "quic.h" +#include "c-hyper.h" + +#ifdef HAVE_GSSAPI +# ifdef HAVE_GSSGNU +# include <gss.h> +# elif defined HAVE_GSSAPI_GSSAPI_H +# include <gssapi/gssapi.h> +# else +# include <gssapi.h> +# endif +# ifdef HAVE_GSSAPI_GSSAPI_GENERIC_H +# include <gssapi/gssapi_generic.h> +# endif +#endif + +#ifdef USE_LIBSSH2 +#include <libssh2.h> +#include <libssh2_sftp.h> +#endif /* USE_LIBSSH2 */ + +#define READBUFFER_SIZE CURL_MAX_WRITE_SIZE +#define READBUFFER_MAX CURL_MAX_READ_SIZE +#define READBUFFER_MIN 1024 + +/* The default upload buffer size, should not be smaller than + CURL_MAX_WRITE_SIZE, as it needs to hold a full buffer as could be sent in + a write callback. + + The size was 16KB for many years but was bumped to 64KB because it makes + libcurl able to do significantly faster uploads in some circumstances. Even + larger buffers can help further, but this is deemed a fair memory/speed + compromise. */ +#define UPLOADBUFFER_DEFAULT 65536 +#define UPLOADBUFFER_MAX (2*1024*1024) +#define UPLOADBUFFER_MIN CURL_MAX_WRITE_SIZE + +#define CURLEASY_MAGIC_NUMBER 0xc0dedbadU +#define GOOD_EASY_HANDLE(x) \ + ((x) && ((x)->magic == CURLEASY_MAGIC_NUMBER)) + +#ifdef HAVE_GSSAPI +/* Types needed for krb5-ftp connections */ +struct krb5buffer { + void *data; + size_t size; + size_t index; + BIT(eof_flag); +}; + +enum protection_level { + PROT_NONE, /* first in list */ + PROT_CLEAR, + PROT_SAFE, + PROT_CONFIDENTIAL, + PROT_PRIVATE, + PROT_CMD, + PROT_LAST /* last in list */ +}; +#endif + +/* enum for the nonblocking SSL connection state machine */ +typedef enum { + ssl_connect_1, + ssl_connect_2, + ssl_connect_2_reading, + ssl_connect_2_writing, + ssl_connect_3, + ssl_connect_done +} ssl_connect_state; + +typedef enum { + ssl_connection_none, + ssl_connection_negotiating, + ssl_connection_complete +} ssl_connection_state; + +/* SSL backend-specific data; declared differently by each SSL backend */ +struct ssl_backend_data; + +struct ssl_primary_config { + long version; /* what version the client wants to use */ + long version_max; /* max supported version the client wants to use */ + char *CApath; /* certificate dir (doesn't work on windows) */ + char *CAfile; /* certificate to verify peer against */ + char *issuercert; /* optional issuer certificate filename */ + char *clientcert; + char *cipher_list; /* list of ciphers to use */ + char *cipher_list13; /* list of TLS 1.3 cipher suites to use */ + char *pinned_key; + char *CRLfile; /* CRL to check certificate revocation */ + struct curl_blob *cert_blob; + struct curl_blob *ca_info_blob; + struct curl_blob *issuercert_blob; +#ifdef USE_TLS_SRP + char *username; /* TLS username (for, e.g., SRP) */ + char *password; /* TLS password (for, e.g., SRP) */ + enum CURL_TLSAUTH authtype; /* TLS authentication type (default SRP) */ +#endif + char *curves; /* list of curves to use */ + unsigned char ssl_options; /* the CURLOPT_SSL_OPTIONS bitmask */ + BIT(verifypeer); /* set TRUE if this is desired */ + BIT(verifyhost); /* set TRUE if CN/SAN must match hostname */ + BIT(verifystatus); /* set TRUE if certificate status must be checked */ + BIT(sessionid); /* cache session IDs or not */ +}; + +struct ssl_config_data { + struct ssl_primary_config primary; + long certverifyresult; /* result from the certificate verification */ + curl_ssl_ctx_callback fsslctx; /* function to initialize ssl ctx */ + void *fsslctxp; /* parameter for call back */ + char *cert_type; /* format for certificate (default: PEM)*/ + char *key; /* private key file name */ + struct curl_blob *key_blob; + char *key_type; /* format for private key (default: PEM) */ + char *key_passwd; /* plain text private key password */ + BIT(certinfo); /* gather lots of certificate info */ + BIT(falsestart); + BIT(enable_beast); /* allow this flaw for interoperability's sake */ + BIT(no_revoke); /* disable SSL certificate revocation checks */ + BIT(no_partialchain); /* don't accept partial certificate chains */ + BIT(revoke_best_effort); /* ignore SSL revocation offline/missing revocation + list errors */ + BIT(native_ca_store); /* use the native ca store of operating system */ + BIT(auto_client_cert); /* automatically locate and use a client + certificate for authentication (Schannel) */ +}; + +struct ssl_general_config { + size_t max_ssl_sessions; /* SSL session id cache size */ + int ca_cache_timeout; /* Certificate store cache timeout (seconds) */ +}; + +/* information stored about one single SSL session */ +struct Curl_ssl_session { + char *name; /* host name for which this ID was used */ + char *conn_to_host; /* host name for the connection (may be NULL) */ + const char *scheme; /* protocol scheme used */ + void *sessionid; /* as returned from the SSL layer */ + size_t idsize; /* if known, otherwise 0 */ + long age; /* just a number, the higher the more recent */ + int remote_port; /* remote port */ + int conn_to_port; /* remote port for the connection (may be -1) */ + struct ssl_primary_config ssl_config; /* setup for this session */ +}; + +#ifdef USE_WINDOWS_SSPI +#include "curl_sspi.h" +#endif + +/* Struct used for Digest challenge-response authentication */ +struct digestdata { +#if defined(USE_WINDOWS_SSPI) + BYTE *input_token; + size_t input_token_len; + CtxtHandle *http_context; + /* copy of user/passwd used to make the identity for http_context. + either may be NULL. */ + char *user; + char *passwd; +#else + char *nonce; + char *cnonce; + char *realm; + char *opaque; + char *qop; + char *algorithm; + int nc; /* nonce count */ + unsigned char algo; + BIT(stale); /* set true for re-negotiation */ + BIT(userhash); +#endif +}; + +typedef enum { + NTLMSTATE_NONE, + NTLMSTATE_TYPE1, + NTLMSTATE_TYPE2, + NTLMSTATE_TYPE3, + NTLMSTATE_LAST +} curlntlm; + +typedef enum { + GSS_AUTHNONE, + GSS_AUTHRECV, + GSS_AUTHSENT, + GSS_AUTHDONE, + GSS_AUTHSUCC +} curlnegotiate; + +/* Struct used for GSSAPI (Kerberos V5) authentication */ +#if defined(USE_KERBEROS5) +struct kerberos5data { +#if defined(USE_WINDOWS_SSPI) + CredHandle *credentials; + CtxtHandle *context; + TCHAR *spn; + SEC_WINNT_AUTH_IDENTITY identity; + SEC_WINNT_AUTH_IDENTITY *p_identity; + size_t token_max; + BYTE *output_token; +#else + gss_ctx_id_t context; + gss_name_t spn; +#endif +}; +#endif + +/* Struct used for SCRAM-SHA-1 authentication */ +#ifdef USE_GSASL +#include <gsasl.h> +struct gsasldata { + Gsasl *ctx; + Gsasl_session *client; +}; +#endif + +/* Struct used for NTLM challenge-response authentication */ +#if defined(USE_NTLM) +struct ntlmdata { +#ifdef USE_WINDOWS_SSPI +/* The sslContext is used for the Schannel bindings. The + * api is available on the Windows 7 SDK and later. + */ +#ifdef SECPKG_ATTR_ENDPOINT_BINDINGS + CtxtHandle *sslContext; +#endif + CredHandle *credentials; + CtxtHandle *context; + SEC_WINNT_AUTH_IDENTITY identity; + SEC_WINNT_AUTH_IDENTITY *p_identity; + size_t token_max; + BYTE *output_token; + BYTE *input_token; + size_t input_token_len; + TCHAR *spn; +#else + unsigned int flags; + unsigned char nonce[8]; + unsigned int target_info_len; + void *target_info; /* TargetInfo received in the ntlm type-2 message */ + +#if defined(NTLM_WB_ENABLED) + /* used for communication with Samba's winbind daemon helper ntlm_auth */ + curl_socket_t ntlm_auth_hlpr_socket; + pid_t ntlm_auth_hlpr_pid; + char *challenge; /* The received base64 encoded ntlm type-2 message */ + char *response; /* The generated base64 ntlm type-1/type-3 message */ +#endif +#endif +}; +#endif + +/* Struct used for Negotiate (SPNEGO) authentication */ +#ifdef USE_SPNEGO +struct negotiatedata { +#ifdef HAVE_GSSAPI + OM_uint32 status; + gss_ctx_id_t context; + gss_name_t spn; + gss_buffer_desc output_token; +#else +#ifdef USE_WINDOWS_SSPI +#ifdef SECPKG_ATTR_ENDPOINT_BINDINGS + CtxtHandle *sslContext; +#endif + DWORD status; + CredHandle *credentials; + CtxtHandle *context; + SEC_WINNT_AUTH_IDENTITY identity; + SEC_WINNT_AUTH_IDENTITY *p_identity; + TCHAR *spn; + size_t token_max; + BYTE *output_token; + size_t output_token_length; +#endif +#endif + BIT(noauthpersist); + BIT(havenoauthpersist); + BIT(havenegdata); + BIT(havemultiplerequests); +}; +#endif + +#ifdef CURL_DISABLE_PROXY +#define CONN_IS_PROXIED(x) 0 +#else +#define CONN_IS_PROXIED(x) x->bits.proxy +#endif + +/* + * Boolean values that concerns this connection. + */ +struct ConnectBits { +#ifndef CURL_DISABLE_PROXY + BIT(httpproxy); /* if set, this transfer is done through an HTTP proxy */ + BIT(socksproxy); /* if set, this transfer is done through a socks proxy */ + BIT(proxy_user_passwd); /* user+password for the proxy? */ + BIT(tunnel_proxy); /* if CONNECT is used to "tunnel" through the proxy. + This is implicit when SSL-protocols are used through + proxies, but can also be enabled explicitly by + apps */ + BIT(proxy_connect_closed); /* TRUE if a proxy disconnected the connection + in a CONNECT request with auth, so that + libcurl should reconnect and continue. */ + BIT(proxy); /* if set, this transfer is done through a proxy - any type */ +#endif + /* always modify bits.close with the connclose() and connkeep() macros! */ + BIT(close); /* if set, we close the connection after this request */ + BIT(reuse); /* if set, this is a re-used connection */ + BIT(altused); /* this is an alt-svc "redirect" */ + BIT(conn_to_host); /* if set, this connection has a "connect to host" + that overrides the host in the URL */ + BIT(conn_to_port); /* if set, this connection has a "connect to port" + that overrides the port in the URL (remote port) */ + BIT(ipv6_ip); /* we communicate with a remote site specified with pure IPv6 + IP address */ + BIT(ipv6); /* we communicate with a site using an IPv6 address */ + BIT(do_more); /* this is set TRUE if the ->curl_do_more() function is + supposed to be called, after ->curl_do() */ + BIT(protoconnstart);/* the protocol layer has STARTED its operation after + the TCP layer connect */ + BIT(retry); /* this connection is about to get closed and then + re-attempted at another connection. */ + BIT(authneg); /* TRUE when the auth phase has started, which means + that we are creating a request with an auth header, + but it is not the final request in the auth + negotiation. */ +#ifndef CURL_DISABLE_FTP + BIT(ftp_use_epsv); /* As set with CURLOPT_FTP_USE_EPSV, but if we find out + EPSV doesn't work we disable it for the forthcoming + requests */ + BIT(ftp_use_eprt); /* As set with CURLOPT_FTP_USE_EPRT, but if we find out + EPRT doesn't work we disable it for the forthcoming + requests */ + BIT(ftp_use_data_ssl); /* Enabled SSL for the data connection */ + BIT(ftp_use_control_ssl); /* Enabled SSL for the control connection */ +#endif +#ifndef CURL_DISABLE_NETRC + BIT(netrc); /* name+password provided by netrc */ +#endif + BIT(bound); /* set true if bind() has already been done on this socket/ + connection */ + BIT(multiplex); /* connection is multiplexed */ + BIT(tcp_fastopen); /* use TCP Fast Open */ + BIT(tls_enable_alpn); /* TLS ALPN extension? */ +#ifndef CURL_DISABLE_DOH + BIT(doh); +#endif +#ifdef USE_UNIX_SOCKETS + BIT(abstract_unix_socket); +#endif + BIT(tls_upgraded); + BIT(sock_accepted); /* TRUE if the SECONDARYSOCKET was created with + accept() */ + BIT(parallel_connect); /* set TRUE when a parallel connect attempt has + started (happy eyeballs) */ +}; + +struct hostname { + char *rawalloc; /* allocated "raw" version of the name */ + char *encalloc; /* allocated IDN-encoded version of the name */ + char *name; /* name to use internally, might be encoded, might be raw */ + const char *dispname; /* name to display, as 'name' might be encoded */ +}; + +/* + * Flags on the keepon member of the Curl_transfer_keeper + */ + +#define KEEP_NONE 0 +#define KEEP_RECV (1<<0) /* there is or may be data to read */ +#define KEEP_SEND (1<<1) /* there is or may be data to write */ +#define KEEP_RECV_HOLD (1<<2) /* when set, no reading should be done but there + might still be data to read */ +#define KEEP_SEND_HOLD (1<<3) /* when set, no writing should be done but there + might still be data to write */ +#define KEEP_RECV_PAUSE (1<<4) /* reading is paused */ +#define KEEP_SEND_PAUSE (1<<5) /* writing is paused */ + +#define KEEP_RECVBITS (KEEP_RECV | KEEP_RECV_HOLD | KEEP_RECV_PAUSE) +#define KEEP_SENDBITS (KEEP_SEND | KEEP_SEND_HOLD | KEEP_SEND_PAUSE) + +#if defined(CURLRES_ASYNCH) || !defined(CURL_DISABLE_DOH) +#define USE_CURL_ASYNC +struct Curl_async { + char *hostname; + struct Curl_dns_entry *dns; + struct thread_data *tdata; + void *resolver; /* resolver state, if it is used in the URL state - + ares_channel e.g. */ + int port; + int status; /* if done is TRUE, this is the status from the callback */ + BIT(done); /* set TRUE when the lookup is complete */ +}; + +#endif + +#define FIRSTSOCKET 0 +#define SECONDARYSOCKET 1 + +enum expect100 { + EXP100_SEND_DATA, /* enough waiting, just send the body now */ + EXP100_AWAITING_CONTINUE, /* waiting for the 100 Continue header */ + EXP100_SENDING_REQUEST, /* still sending the request but will wait for + the 100 header once done with the request */ + EXP100_FAILED /* used on 417 Expectation Failed */ +}; + +enum upgrade101 { + UPGR101_INIT, /* default state */ + UPGR101_WS, /* upgrade to WebSockets requested */ + UPGR101_H2, /* upgrade to HTTP/2 requested */ + UPGR101_RECEIVED, /* 101 response received */ + UPGR101_WORKING /* talking upgraded protocol */ +}; + +enum doh_slots { + /* Explicit values for first two symbols so as to match hard-coded + * constants in existing code + */ + DOH_PROBE_SLOT_IPADDR_V4 = 0, /* make 'V4' stand out for readability */ + DOH_PROBE_SLOT_IPADDR_V6 = 1, /* 'V6' likewise */ + + /* Space here for (possibly build-specific) additional slot definitions */ + + /* for example */ + /* #ifdef WANT_DOH_FOOBAR_TXT */ + /* DOH_PROBE_SLOT_FOOBAR_TXT, */ + /* #endif */ + + /* AFTER all slot definitions, establish how many we have */ + DOH_PROBE_SLOTS +}; + +/* + * Request specific data in the easy handle (Curl_easy). Previously, + * these members were on the connectdata struct but since a conn struct may + * now be shared between different Curl_easys, we store connection-specific + * data here. This struct only keeps stuff that's interesting for *this* + * request, as it will be cleared between multiple ones + */ +struct SingleRequest { + curl_off_t size; /* -1 if unknown at this point */ + curl_off_t maxdownload; /* in bytes, the maximum amount of data to fetch, + -1 means unlimited */ + curl_off_t bytecount; /* total number of bytes read */ + curl_off_t writebytecount; /* number of bytes written */ + + curl_off_t headerbytecount; /* only count received headers */ + curl_off_t deductheadercount; /* this amount of bytes doesn't count when we + check if anything has been transferred at + the end of a connection. We use this + counter to make only a 100 reply (without a + following second response code) result in a + CURLE_GOT_NOTHING error code */ + + curl_off_t pendingheader; /* this many bytes left to send is actually + header and not body */ + struct curltime start; /* transfer started at this time */ + struct curltime now; /* current time */ + enum { + HEADER_NORMAL, /* no bad header at all */ + HEADER_PARTHEADER, /* part of the chunk is a bad header, the rest + is normal data */ + HEADER_ALLBAD /* all was believed to be header */ + } badheader; /* the header was deemed bad and will be + written as body */ + int headerline; /* counts header lines to better track the + first one */ + char *str; /* within buf */ + curl_off_t offset; /* possible resume offset read from the + Content-Range: header */ + int httpcode; /* error code from the 'HTTP/1.? XXX' or + 'RTSP/1.? XXX' line */ + int keepon; + struct curltime start100; /* time stamp to wait for the 100 code from */ + enum expect100 exp100; /* expect 100 continue state */ + enum upgrade101 upgr101; /* 101 upgrade state */ + + /* Content unencoding stack. See sec 3.5, RFC2616. */ + struct contenc_writer *writer_stack; + time_t timeofdoc; + long bodywrites; + char *location; /* This points to an allocated version of the Location: + header data */ + char *newurl; /* Set to the new URL to use when a redirect or a retry is + wanted */ + + /* 'upload_present' is used to keep a byte counter of how much data there is + still left in the buffer, aimed for upload. */ + ssize_t upload_present; + + /* 'upload_fromhere' is used as a read-pointer when we uploaded parts of a + buffer, so the next read should read from where this pointer points to, + and the 'upload_present' contains the number of bytes available at this + position */ + char *upload_fromhere; + + /* Allocated protocol-specific data. Each protocol handler makes sure this + points to data it needs. */ + union { + struct FILEPROTO *file; + struct FTP *ftp; + struct HTTP *http; + struct IMAP *imap; + struct ldapreqinfo *ldap; + struct MQTT *mqtt; + struct POP3 *pop3; + struct RTSP *rtsp; + struct smb_request *smb; + struct SMTP *smtp; + struct SSHPROTO *ssh; + struct TELNET *telnet; + } p; +#ifndef CURL_DISABLE_DOH + struct dohdata *doh; /* DoH specific data for this request */ +#endif + unsigned char setcookies; + BIT(header); /* incoming data has HTTP header */ + BIT(content_range); /* set TRUE if Content-Range: was found */ + BIT(upload_done); /* set to TRUE when doing chunked transfer-encoding + upload and we're uploading the last chunk */ + BIT(ignorebody); /* we read a response-body but we ignore it! */ + BIT(http_bodyless); /* HTTP response status code is between 100 and 199, + 204 or 304 */ + BIT(chunk); /* if set, this is a chunked transfer-encoding */ + BIT(ignore_cl); /* ignore content-length */ + BIT(upload_chunky); /* set TRUE if we are doing chunked transfer-encoding + on upload */ + BIT(getheader); /* TRUE if header parsing is wanted */ + BIT(forbidchunk); /* used only to explicitly forbid chunk-upload for + specific upload buffers. See readmoredata() in http.c + for details. */ + BIT(no_body); /* the response has no body */ +}; + +/* + * Specific protocol handler. + */ + +struct Curl_handler { + const char *scheme; /* URL scheme name. */ + + /* Complement to setup_connection_internals(). This is done before the + transfer "owns" the connection. */ + CURLcode (*setup_connection)(struct Curl_easy *data, + struct connectdata *conn); + + /* These two functions MUST be set to be protocol dependent */ + CURLcode (*do_it)(struct Curl_easy *data, bool *done); + CURLcode (*done)(struct Curl_easy *, CURLcode, bool); + + /* If the curl_do() function is better made in two halves, this + * curl_do_more() function will be called afterwards, if set. For example + * for doing the FTP stuff after the PASV/PORT command. + */ + CURLcode (*do_more)(struct Curl_easy *, int *); + + /* This function *MAY* be set to a protocol-dependent function that is run + * after the connect() and everything is done, as a step in the connection. + * The 'done' pointer points to a bool that should be set to TRUE if the + * function completes before return. If it doesn't complete, the caller + * should call the curl_connecting() function until it is. + */ + CURLcode (*connect_it)(struct Curl_easy *data, bool *done); + + /* See above. */ + CURLcode (*connecting)(struct Curl_easy *data, bool *done); + CURLcode (*doing)(struct Curl_easy *data, bool *done); + + /* Called from the multi interface during the PROTOCONNECT phase, and it + should then return a proper fd set */ + int (*proto_getsock)(struct Curl_easy *data, + struct connectdata *conn, curl_socket_t *socks); + + /* Called from the multi interface during the DOING phase, and it should + then return a proper fd set */ + int (*doing_getsock)(struct Curl_easy *data, + struct connectdata *conn, curl_socket_t *socks); + + /* Called from the multi interface during the DO_MORE phase, and it should + then return a proper fd set */ + int (*domore_getsock)(struct Curl_easy *data, + struct connectdata *conn, curl_socket_t *socks); + + /* Called from the multi interface during the DO_DONE, PERFORM and + WAITPERFORM phases, and it should then return a proper fd set. Not setting + this will make libcurl use the generic default one. */ + int (*perform_getsock)(struct Curl_easy *data, + struct connectdata *conn, curl_socket_t *socks); + + /* This function *MAY* be set to a protocol-dependent function that is run + * by the curl_disconnect(), as a step in the disconnection. If the handler + * is called because the connection has been considered dead, + * dead_connection is set to TRUE. The connection is already disassociated + * from the transfer here. + */ + CURLcode (*disconnect)(struct Curl_easy *, struct connectdata *, + bool dead_connection); + + /* If used, this function gets called from transfer.c:readwrite_data() to + allow the protocol to do extra reads/writes */ + CURLcode (*readwrite)(struct Curl_easy *data, struct connectdata *conn, + ssize_t *nread, bool *readmore); + + /* This function can perform various checks on the connection. See + CONNCHECK_* for more information about the checks that can be performed, + and CONNRESULT_* for the results that can be returned. */ + unsigned int (*connection_check)(struct Curl_easy *data, + struct connectdata *conn, + unsigned int checks_to_perform); + + /* attach() attaches this transfer to this connection */ + void (*attach)(struct Curl_easy *data, struct connectdata *conn); + + int defport; /* Default port. */ + curl_prot_t protocol; /* See CURLPROTO_* - this needs to be the single + specific protocol bit */ + curl_prot_t family; /* single bit for protocol family; basically the + non-TLS name of the protocol this is */ + unsigned int flags; /* Extra particular characteristics, see PROTOPT_* */ + +}; + +#define PROTOPT_NONE 0 /* nothing extra */ +#define PROTOPT_SSL (1<<0) /* uses SSL */ +#define PROTOPT_DUAL (1<<1) /* this protocol uses two connections */ +#define PROTOPT_CLOSEACTION (1<<2) /* need action before socket close */ +/* some protocols will have to call the underlying functions without regard to + what exact state the socket signals. IE even if the socket says "readable", + the send function might need to be called while uploading, or vice versa. +*/ +#define PROTOPT_DIRLOCK (1<<3) +#define PROTOPT_NONETWORK (1<<4) /* protocol doesn't use the network! */ +#define PROTOPT_NEEDSPWD (1<<5) /* needs a password, and if none is set it + gets a default */ +#define PROTOPT_NOURLQUERY (1<<6) /* protocol can't handle + url query strings (?foo=bar) ! */ +#define PROTOPT_CREDSPERREQUEST (1<<7) /* requires login credentials per + request instead of per connection */ +#define PROTOPT_ALPN (1<<8) /* set ALPN for this */ +#define PROTOPT_STREAM (1<<9) /* a protocol with individual logical streams */ +#define PROTOPT_URLOPTIONS (1<<10) /* allow options part in the userinfo field + of the URL */ +#define PROTOPT_PROXY_AS_HTTP (1<<11) /* allow this non-HTTP scheme over a + HTTP proxy as HTTP proxies may know + this protocol and act as a gateway */ +#define PROTOPT_WILDCARD (1<<12) /* protocol supports wildcard matching */ +#define PROTOPT_USERPWDCTRL (1<<13) /* Allow "control bytes" (< 32 ascii) in + user name and password */ +#define PROTOPT_NOTCPPROXY (1<<14) /* this protocol can't proxy over TCP */ + +#define CONNCHECK_NONE 0 /* No checks */ +#define CONNCHECK_ISDEAD (1<<0) /* Check if the connection is dead. */ +#define CONNCHECK_KEEPALIVE (1<<1) /* Perform any keepalive function. */ + +#define CONNRESULT_NONE 0 /* No extra information. */ +#define CONNRESULT_DEAD (1<<0) /* The connection is dead. */ + +#ifdef USE_RECV_BEFORE_SEND_WORKAROUND +struct postponed_data { + char *buffer; /* Temporal store for received data during + sending, must be freed */ + size_t allocated_size; /* Size of temporal store */ + size_t recv_size; /* Size of received data during sending */ + size_t recv_processed; /* Size of processed part of postponed data */ +#ifdef DEBUGBUILD + curl_socket_t bindsock;/* Structure must be bound to specific socket, + used only for DEBUGASSERT */ +#endif /* DEBUGBUILD */ +}; +#endif /* USE_RECV_BEFORE_SEND_WORKAROUND */ + +struct proxy_info { + struct hostname host; + int port; + unsigned char proxytype; /* curl_proxytype: what kind of proxy that is in + use */ + char *user; /* proxy user name string, allocated */ + char *passwd; /* proxy password string, allocated */ +}; + +struct ldapconninfo; + +#define TRNSPRT_TCP 3 +#define TRNSPRT_UDP 4 +#define TRNSPRT_QUIC 5 +#define TRNSPRT_UNIX 6 + +/* + * The connectdata struct contains all fields and variables that should be + * unique for an entire connection. + */ +struct connectdata { + struct Curl_llist_element bundle_node; /* conncache */ + + /* chunk is for HTTP chunked encoding, but is in the general connectdata + struct only because we can do just about any protocol through an HTTP + proxy and an HTTP proxy may in fact respond using chunked encoding */ + struct Curl_chunker chunk; + + curl_closesocket_callback fclosesocket; /* function closing the socket(s) */ + void *closesocket_client; + + /* This is used by the connection cache logic. If this returns TRUE, this + handle is still used by one or more easy handles and can only used by any + other easy handle without careful consideration (== only for + multiplexing) and it cannot be used by another multi handle! */ +#define CONN_INUSE(c) ((c)->easyq.size) + + /**** Fields set when inited and not modified again */ + long connection_id; /* Contains a unique number to make it easier to + track the connections in the log output */ + + /* 'dns_entry' is the particular host we use. This points to an entry in the + DNS cache and it will not get pruned while locked. It gets unlocked in + multi_done(). This entry will be NULL if the connection is re-used as then + there is no name resolve done. */ + struct Curl_dns_entry *dns_entry; + + /* 'ip_addr' is the particular IP we connected to. It points to a struct + within the DNS cache, so this pointer is only valid as long as the DNS + cache entry remains locked. It gets unlocked in multi_done() */ + struct Curl_addrinfo *ip_addr; + struct Curl_addrinfo *tempaddr[2]; /* for happy eyeballs */ + +#ifdef ENABLE_QUIC + struct quicsocket hequic[2]; /* two, for happy eyeballs! */ + struct quicsocket *quic; +#endif + + struct hostname host; + char *hostname_resolve; /* host name to resolve to address, allocated */ + char *secondaryhostname; /* secondary socket host name (ftp) */ + struct hostname conn_to_host; /* the host to connect to. valid only if + bits.conn_to_host is set */ +#ifndef CURL_DISABLE_PROXY + struct proxy_info socks_proxy; + struct proxy_info http_proxy; +#endif + /* 'primary_ip' and 'primary_port' get filled with peer's numerical + ip address and port number whenever an outgoing connection is + *attempted* from the primary socket to a remote address. When more + than one address is tried for a connection these will hold data + for the last attempt. When the connection is actually established + these are updated with data which comes directly from the socket. */ + + char primary_ip[MAX_IPADR_LEN]; + char *user; /* user name string, allocated */ + char *passwd; /* password string, allocated */ + char *options; /* options string, allocated */ + char *sasl_authzid; /* authorization identity string, allocated */ + char *oauth_bearer; /* OAUTH2 bearer, allocated */ + struct curltime now; /* "current" time */ + struct curltime created; /* creation time */ + struct curltime lastused; /* when returned to the connection cache */ + curl_socket_t sock[2]; /* two sockets, the second is used for the data + transfer when doing FTP */ + curl_socket_t tempsock[2]; /* temporary sockets for happy eyeballs */ + int tempfamily[2]; /* family used for the temp sockets */ + Curl_recv *recv[2]; + Curl_send *send[2]; + struct Curl_cfilter *cfilter[2]; /* connection filters */ + +#ifdef USE_RECV_BEFORE_SEND_WORKAROUND + struct postponed_data postponed[2]; /* two buffers for two sockets */ +#endif /* USE_RECV_BEFORE_SEND_WORKAROUND */ + struct ssl_primary_config ssl_config; +#ifndef CURL_DISABLE_PROXY + struct ssl_primary_config proxy_ssl_config; +#endif + struct ConnectBits bits; /* various state-flags for this connection */ + + /* connecttime: when connect() is called on the current IP address. Used to + be able to track when to move on to try next IP - but only when the multi + interface is used. */ + struct curltime connecttime; + + /* The field below gets set in Curl_connecthost */ + /* how long time in milliseconds to spend on trying to connect to each IP + address, per family */ + timediff_t timeoutms_per_addr[2]; + + const struct Curl_handler *handler; /* Connection's protocol handler */ + const struct Curl_handler *given; /* The protocol first given */ + + /* Protocols can use a custom keepalive mechanism to keep connections alive. + This allows those protocols to track the last time the keepalive mechanism + was used on this connection. */ + struct curltime keepalive; + + /**** curl_get() phase fields */ + + curl_socket_t sockfd; /* socket to read from or CURL_SOCKET_BAD */ + curl_socket_t writesockfd; /* socket to write to, it may very + well be the same we read from. + CURL_SOCKET_BAD disables */ + +#ifdef HAVE_GSSAPI + BIT(sec_complete); /* if Kerberos is enabled for this connection */ + unsigned char command_prot; /* enum protection_level */ + unsigned char data_prot; /* enum protection_level */ + unsigned char request_data_prot; /* enum protection_level */ + size_t buffer_size; + struct krb5buffer in_buffer; + void *app_data; + const struct Curl_sec_client_mech *mech; + struct sockaddr_in local_addr; +#endif + +#if defined(USE_KERBEROS5) /* Consider moving some of the above GSS-API */ + struct kerberos5data krb5; /* variables into the structure definition, */ +#endif /* however, some of them are ftp specific. */ + + struct Curl_llist easyq; /* List of easy handles using this connection */ + curl_seek_callback seek_func; /* function that seeks the input */ + void *seek_client; /* pointer to pass to the seek() above */ + + /*************** Request - specific items ************/ +#if defined(USE_WINDOWS_SSPI) && defined(SECPKG_ATTR_ENDPOINT_BINDINGS) + CtxtHandle *sslContext; +#endif + +#ifdef USE_GSASL + struct gsasldata gsasl; +#endif + +#if defined(USE_NTLM) + curlntlm http_ntlm_state; + curlntlm proxy_ntlm_state; + + struct ntlmdata ntlm; /* NTLM differs from other authentication schemes + because it authenticates connections, not + single requests! */ + struct ntlmdata proxyntlm; /* NTLM data for proxy */ +#endif + +#ifdef USE_SPNEGO + curlnegotiate http_negotiate_state; + curlnegotiate proxy_negotiate_state; + + struct negotiatedata negotiate; /* state data for host Negotiate auth */ + struct negotiatedata proxyneg; /* state data for proxy Negotiate auth */ +#endif + + /* for chunked-encoded trailer */ + struct dynbuf trailer; + + union { +#ifndef CURL_DISABLE_FTP + struct ftp_conn ftpc; +#endif +#ifndef CURL_DISABLE_HTTP + struct http_conn httpc; +#endif +#ifdef USE_SSH + struct ssh_conn sshc; +#endif +#ifndef CURL_DISABLE_TFTP + struct tftp_state_data *tftpc; +#endif +#ifndef CURL_DISABLE_IMAP + struct imap_conn imapc; +#endif +#ifndef CURL_DISABLE_POP3 + struct pop3_conn pop3c; +#endif +#ifndef CURL_DISABLE_SMTP + struct smtp_conn smtpc; +#endif +#ifndef CURL_DISABLE_RTSP + struct rtsp_conn rtspc; +#endif +#ifndef CURL_DISABLE_SMB + struct smb_conn smbc; +#endif + void *rtmp; + struct ldapconninfo *ldapc; +#ifndef CURL_DISABLE_MQTT + struct mqtt_conn mqtt; +#endif + } proto; + + struct connectbundle *bundle; /* The bundle we are member of */ +#ifdef USE_UNIX_SOCKETS + char *unix_domain_socket; +#endif +#ifdef USE_HYPER + /* if set, an alternative data transfer function */ + Curl_datastream datastream; +#endif + /* When this connection is created, store the conditions for the local end + bind. This is stored before the actual bind and before any connection is + made and will serve the purpose of being used for comparison reasons so + that subsequent bound-requested connections aren't accidentally re-using + wrong connections. */ + char *localdev; + int localportrange; + int cselect_bits; /* bitmask of socket events */ + int waitfor; /* current READ/WRITE bits to wait for */ +#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI) + int socks5_gssapi_enctype; +#endif + /* The field below gets set in Curl_connecthost */ + int num_addr; /* number of addresses to try to connect to */ + int port; /* which port to use locally - to connect to */ + int remote_port; /* the remote port, not the proxy port! */ + int conn_to_port; /* the remote port to connect to. valid only if + bits.conn_to_port is set */ +#ifdef ENABLE_IPV6 + unsigned int scope_id; /* Scope id for IPv6 */ +#endif + unsigned short localport; + unsigned short secondary_port; /* secondary socket remote port to connect to + (ftp) */ + unsigned char alpn; /* APLN TLS negotiated protocol, a CURL_HTTP_VERSION* + value */ + unsigned char transport; /* one of the TRNSPRT_* defines */ + unsigned char ip_version; /* copied from the Curl_easy at creation time */ + unsigned char httpversion; /* the HTTP version*10 reported by the server */ + unsigned char connect_only; +}; + +/* The end of connectdata. */ + +/* + * Struct to keep statistical and informational data. + * All variables in this struct must be initialized/reset in Curl_initinfo(). + */ +struct PureInfo { + int httpcode; /* Recent HTTP, FTP, RTSP or SMTP response code */ + int httpproxycode; /* response code from proxy when received separate */ + int httpversion; /* the http version number X.Y = X*10+Y */ + time_t filetime; /* If requested, this is might get set. Set to -1 if the + time was unretrievable. */ + curl_off_t header_size; /* size of read header(s) in bytes */ + curl_off_t request_size; /* the amount of bytes sent in the request(s) */ + unsigned long proxyauthavail; /* what proxy auth types were announced */ + unsigned long httpauthavail; /* what host auth types were announced */ + long numconnects; /* how many new connection did libcurl created */ + char *contenttype; /* the content type of the object */ + char *wouldredirect; /* URL this would've been redirected to if asked to */ + curl_off_t retry_after; /* info from Retry-After: header */ + + /* PureInfo members 'conn_primary_ip', 'conn_primary_port', 'conn_local_ip' + and, 'conn_local_port' are copied over from the connectdata struct in + order to allow curl_easy_getinfo() to return this information even when + the session handle is no longer associated with a connection, and also + allow curl_easy_reset() to clear this information from the session handle + without disturbing information which is still alive, and that might be + reused, in the connection cache. */ + + char conn_primary_ip[MAX_IPADR_LEN]; + int conn_primary_port; /* this is the destination port to the connection, + which might have been a proxy */ + int conn_remote_port; /* this is the "remote port", which is the port + number of the used URL, independent of proxy or + not */ + char conn_local_ip[MAX_IPADR_LEN]; + int conn_local_port; + const char *conn_scheme; + unsigned int conn_protocol; + struct curl_certinfo certs; /* info about the certs, only populated in + OpenSSL, GnuTLS, Schannel, NSS and GSKit + builds. Asked for with CURLOPT_CERTINFO + / CURLINFO_CERTINFO */ + CURLproxycode pxcode; + BIT(timecond); /* set to TRUE if the time condition didn't match, which + thus made the document NOT get fetched */ +}; + + +struct Progress { + time_t lastshow; /* time() of the last displayed progress meter or NULL to + force redraw at next call */ + curl_off_t size_dl; /* total expected size */ + curl_off_t size_ul; /* total expected size */ + curl_off_t downloaded; /* transferred so far */ + curl_off_t uploaded; /* transferred so far */ + + curl_off_t current_speed; /* uses the currently fastest transfer */ + + int width; /* screen width at download start */ + int flags; /* see progress.h */ + + timediff_t timespent; + + curl_off_t dlspeed; + curl_off_t ulspeed; + + timediff_t t_nslookup; + timediff_t t_connect; + timediff_t t_appconnect; + timediff_t t_pretransfer; + timediff_t t_starttransfer; + timediff_t t_redirect; + + struct curltime start; + struct curltime t_startsingle; + struct curltime t_startop; + struct curltime t_acceptdata; + + + /* upload speed limit */ + struct curltime ul_limit_start; + curl_off_t ul_limit_size; + /* download speed limit */ + struct curltime dl_limit_start; + curl_off_t dl_limit_size; + +#define CURR_TIME (5 + 1) /* 6 entries for 5 seconds */ + + curl_off_t speeder[ CURR_TIME ]; + struct curltime speeder_time[ CURR_TIME ]; + int speeder_c; + BIT(callback); /* set when progress callback is used */ + BIT(is_t_startransfer_set); +}; + +typedef enum { + RTSPREQ_NONE, /* first in list */ + RTSPREQ_OPTIONS, + RTSPREQ_DESCRIBE, + RTSPREQ_ANNOUNCE, + RTSPREQ_SETUP, + RTSPREQ_PLAY, + RTSPREQ_PAUSE, + RTSPREQ_TEARDOWN, + RTSPREQ_GET_PARAMETER, + RTSPREQ_SET_PARAMETER, + RTSPREQ_RECORD, + RTSPREQ_RECEIVE, + RTSPREQ_LAST /* last in list */ +} Curl_RtspReq; + +struct auth { + unsigned long want; /* Bitmask set to the authentication methods wanted by + app (with CURLOPT_HTTPAUTH or CURLOPT_PROXYAUTH). */ + unsigned long picked; + unsigned long avail; /* Bitmask for what the server reports to support for + this resource */ + BIT(done); /* TRUE when the auth phase is done and ready to do the + actual request */ + BIT(multipass); /* TRUE if this is not yet authenticated but within the + auth multipass negotiation */ + BIT(iestyle); /* TRUE if digest should be done IE-style or FALSE if it + should be RFC compliant */ +}; + +struct Curl_http2_dep { + struct Curl_http2_dep *next; + struct Curl_easy *data; +}; + +/* + * This struct is for holding data that was attempted to get sent to the user's + * callback but is held due to pausing. One instance per type (BOTH, HEADER, + * BODY). + */ +struct tempbuf { + struct dynbuf b; + int type; /* type of the 'tempwrite' buffer as a bitmask that is used with + Curl_client_write() */ +}; + +/* Timers */ +typedef enum { + EXPIRE_100_TIMEOUT, + EXPIRE_ASYNC_NAME, + EXPIRE_CONNECTTIMEOUT, + EXPIRE_DNS_PER_NAME, /* family1 */ + EXPIRE_DNS_PER_NAME2, /* family2 */ + EXPIRE_HAPPY_EYEBALLS_DNS, /* See asyn-ares.c */ + EXPIRE_HAPPY_EYEBALLS, + EXPIRE_MULTI_PENDING, + EXPIRE_RUN_NOW, + EXPIRE_SPEEDCHECK, + EXPIRE_TIMEOUT, + EXPIRE_TOOFAST, + EXPIRE_QUIC, + EXPIRE_FTP_ACCEPT, + EXPIRE_LAST /* not an actual timer, used as a marker only */ +} expire_id; + + +typedef enum { + TRAILERS_NONE, + TRAILERS_INITIALIZED, + TRAILERS_SENDING, + TRAILERS_DONE +} trailers_state; + + +/* + * One instance for each timeout an easy handle can set. + */ +struct time_node { + struct Curl_llist_element list; + struct curltime time; + expire_id eid; +}; + +/* individual pieces of the URL */ +struct urlpieces { + char *scheme; + char *hostname; + char *port; + char *user; + char *password; + char *options; + char *path; + char *query; +}; + +struct UrlState { + /* Points to the connection cache */ + struct conncache *conn_cache; + /* buffers to store authentication data in, as parsed from input options */ + struct curltime keeps_speed; /* for the progress meter really */ + + long lastconnect_id; /* The last connection, -1 if undefined */ + struct dynbuf headerb; /* buffer to store headers in */ + + char *buffer; /* download buffer */ + char *ulbuf; /* allocated upload buffer or NULL */ + curl_off_t current_speed; /* the ProgressShow() function sets this, + bytes / second */ + + /* host name, port number and protocol of the first (not followed) request. + if set, this should be the host name that we will sent authorization to, + no else. Used to make Location: following not keep sending user+password. + This is strdup()ed data. */ + char *first_host; + int first_remote_port; + curl_prot_t first_remote_protocol; + + int retrycount; /* number of retries on a new connection */ + struct Curl_ssl_session *session; /* array of 'max_ssl_sessions' size */ + long sessionage; /* number of the most recent session */ + struct tempbuf tempwrite[3]; /* BOTH, HEADER, BODY */ + unsigned int tempcount; /* number of entries in use in tempwrite, 0 - 3 */ + int os_errno; /* filled in with errno whenever an error occurs */ + char *scratch; /* huge buffer[set.buffer_size*2] for upload CRLF replacing */ + long followlocation; /* redirect counter */ + int requests; /* request counter: redirects + authentication retakes */ +#ifdef HAVE_SIGNAL + /* storage for the previous bag^H^H^HSIGPIPE signal handler :-) */ + void (*prev_signal)(int sig); +#endif +#ifndef CURL_DISABLE_CRYPTO_AUTH + struct digestdata digest; /* state data for host Digest auth */ + struct digestdata proxydigest; /* state data for proxy Digest auth */ +#endif + struct auth authhost; /* auth details for host */ + struct auth authproxy; /* auth details for proxy */ +#ifdef USE_CURL_ASYNC + struct Curl_async async; /* asynchronous name resolver data */ +#endif + +#if defined(USE_OPENSSL) + /* void instead of ENGINE to avoid bleeding OpenSSL into this header */ + void *engine; +#endif /* USE_OPENSSL */ + struct curltime expiretime; /* set this with Curl_expire() only */ + struct Curl_tree timenode; /* for the splay stuff */ + struct Curl_llist timeoutlist; /* list of pending timeouts */ + struct time_node expires[EXPIRE_LAST]; /* nodes for each expire type */ + + /* a place to store the most recently set (S)FTP entrypath */ + char *most_recent_ftp_entrypath; + unsigned char httpwant; /* when non-zero, a specific HTTP version requested + to be used in the library's request(s) */ + unsigned char httpversion; /* the lowest HTTP version*10 reported by any + server involved in this request */ + +#if !defined(WIN32) && !defined(MSDOS) && !defined(__EMX__) +/* do FTP line-end conversions on most platforms */ +#define CURL_DO_LINEEND_CONV + /* for FTP downloads: track CRLF sequences that span blocks */ + BIT(prev_block_had_trailing_cr); + /* for FTP downloads: how many CRLFs did we converted to LFs? */ + curl_off_t crlf_conversions; +#endif + char *range; /* range, if used. See README for detailed specification on + this syntax. */ + curl_off_t resume_from; /* continue [ftp] transfer from here */ + +#ifndef CURL_DISABLE_RTSP + /* This RTSP state information survives requests and connections */ + long rtsp_next_client_CSeq; /* the session's next client CSeq */ + long rtsp_next_server_CSeq; /* the session's next server CSeq */ + long rtsp_CSeq_recv; /* most recent CSeq received */ +#endif + + curl_off_t infilesize; /* size of file to upload, -1 means unknown. + Copied from set.filesize at start of operation */ +#if defined(USE_HTTP2) || defined(USE_HTTP3) + size_t drain; /* Increased when this stream has data to read, even if its + socket is not necessarily is readable. Decreased when + checked. */ +#endif + + curl_read_callback fread_func; /* read callback/function */ + void *in; /* CURLOPT_READDATA */ +#ifdef USE_HTTP2 + struct Curl_easy *stream_depends_on; + int stream_weight; +#endif + CURLU *uh; /* URL handle for the current parsed URL */ + struct urlpieces up; + unsigned char httpreq; /* Curl_HttpReq; what kind of HTTP request (if any) + is this */ + char *url; /* work URL, copied from UserDefined */ + char *referer; /* referer string */ +#ifndef CURL_DISABLE_COOKIES + struct curl_slist *cookielist; /* list of cookie files set by + curl_easy_setopt(COOKIEFILE) calls */ +#endif + struct curl_slist *resolve; /* set to point to the set.resolve list when + this should be dealt with in pretransfer */ +#ifndef CURL_DISABLE_HTTP + size_t trailers_bytes_sent; + struct dynbuf trailers_buf; /* a buffer containing the compiled trailing + headers */ + struct Curl_llist httphdrs; /* received headers */ + struct curl_header headerout; /* for external purposes */ + struct Curl_header_store *prevhead; /* the latest added header */ + trailers_state trailers_state; /* whether we are sending trailers + and what stage are we at */ +#endif +#ifdef USE_HYPER + bool hconnect; /* set if a CONNECT request */ + CURLcode hresult; /* used to pass return codes back from hyper callbacks */ +#endif + + /* Dynamically allocated strings, MUST be freed before this struct is + killed. */ + struct dynamically_allocated_data { + char *proxyuserpwd; + char *uagent; + char *accept_encoding; + char *userpwd; + char *rangeline; + char *ref; + char *host; + char *cookiehost; + char *rtsp_transport; + char *te; /* TE: request header */ + + /* transfer credentials */ + char *user; + char *passwd; + char *proxyuser; + char *proxypasswd; + } aptr; + +#ifdef CURLDEBUG + BIT(conncache_lock); +#endif + /* when curl_easy_perform() is called, the multi handle is "owned" by + the easy handle so curl_easy_cleanup() on such an easy handle will + also close the multi handle! */ + BIT(multi_owned_by_easy); + + BIT(this_is_a_follow); /* this is a followed Location: request */ + BIT(refused_stream); /* this was refused, try again */ + BIT(errorbuf); /* Set to TRUE if the error buffer is already filled in. + This must be set to FALSE every time _easy_perform() is + called. */ + BIT(allow_port); /* Is set.use_port allowed to take effect or not. This + is always set TRUE when curl_easy_perform() is called. */ + BIT(authproblem); /* TRUE if there's some problem authenticating */ + /* set after initial USER failure, to prevent an authentication loop */ + BIT(wildcardmatch); /* enable wildcard matching */ + BIT(expect100header); /* TRUE if we added Expect: 100-continue */ + BIT(disableexpect); /* TRUE if Expect: is disabled due to a previous + 417 response */ + BIT(use_range); + BIT(rangestringalloc); /* the range string is malloc()'ed */ + BIT(done); /* set to FALSE when Curl_init_do() is called and set to TRUE + when multi_done() is called, to prevent multi_done() to get + invoked twice when the multi interface is used. */ + BIT(stream_depends_e); /* set or don't set the Exclusive bit */ + BIT(previouslypending); /* this transfer WAS in the multi->pending queue */ + BIT(cookie_engine); + BIT(prefer_ascii); /* ASCII rather than binary */ + BIT(list_only); /* list directory contents */ + BIT(url_alloc); /* URL string is malloc()'ed */ + BIT(referer_alloc); /* referer string is malloc()ed */ + BIT(wildcard_resolve); /* Set to true if any resolve change is a wildcard */ + BIT(rewindbeforesend);/* TRUE when the sending couldn't be stopped even + though it will be discarded. We must call the data + rewind callback before trying to send again. */ +}; + +/* + * This 'UserDefined' struct must only contain data that is set once to go + * for many (perhaps) independent connections. Values that are generated or + * calculated internally for the "session handle" MUST be defined within the + * 'struct UrlState' instead. The only exceptions MUST note the changes in + * the 'DynamicStatic' struct. + * Character pointer fields point to dynamic storage, unless otherwise stated. + */ + +struct Curl_multi; /* declared in multihandle.c */ + +/* + * This enumeration MUST not use conditional directives (#ifdefs), new + * null terminated strings MUST be added to the enumeration immediately + * before STRING_LASTZEROTERMINATED, binary fields immediately before + * STRING_LAST. When doing so, ensure that the packages/OS400/chkstring.c + * test is updated and applicable changes for EBCDIC to ASCII conversion + * are catered for in curl_easy_setopt_ccsid() + */ +enum dupstring { + STRING_CERT, /* client certificate file name */ + STRING_CERT_PROXY, /* client certificate file name */ + STRING_CERT_TYPE, /* format for certificate (default: PEM)*/ + STRING_CERT_TYPE_PROXY, /* format for certificate (default: PEM)*/ + STRING_COOKIE, /* HTTP cookie string to send */ + STRING_COOKIEJAR, /* dump all cookies to this file */ + STRING_CUSTOMREQUEST, /* HTTP/FTP/RTSP request/method to use */ + STRING_DEFAULT_PROTOCOL, /* Protocol to use when the URL doesn't specify */ + STRING_DEVICE, /* local network interface/address to use */ + STRING_ENCODING, /* Accept-Encoding string */ + STRING_FTP_ACCOUNT, /* ftp account data */ + STRING_FTP_ALTERNATIVE_TO_USER, /* command to send if USER/PASS fails */ + STRING_FTPPORT, /* port to send with the FTP PORT command */ + STRING_KEY, /* private key file name */ + STRING_KEY_PROXY, /* private key file name */ + STRING_KEY_PASSWD, /* plain text private key password */ + STRING_KEY_PASSWD_PROXY, /* plain text private key password */ + STRING_KEY_TYPE, /* format for private key (default: PEM) */ + STRING_KEY_TYPE_PROXY, /* format for private key (default: PEM) */ + STRING_KRB_LEVEL, /* krb security level */ + STRING_NETRC_FILE, /* if not NULL, use this instead of trying to find + $HOME/.netrc */ + STRING_PROXY, /* proxy to use */ + STRING_PRE_PROXY, /* pre socks proxy to use */ + STRING_SET_RANGE, /* range, if used */ + STRING_SET_REFERER, /* custom string for the HTTP referer field */ + STRING_SET_URL, /* what original URL to work on */ + STRING_SSL_CAPATH, /* CA directory name (doesn't work on windows) */ + STRING_SSL_CAPATH_PROXY, /* CA directory name (doesn't work on windows) */ + STRING_SSL_CAFILE, /* certificate file to verify peer against */ + STRING_SSL_CAFILE_PROXY, /* certificate file to verify peer against */ + STRING_SSL_PINNEDPUBLICKEY, /* public key file to verify peer against */ + STRING_SSL_PINNEDPUBLICKEY_PROXY, /* public key file to verify proxy */ + STRING_SSL_CIPHER_LIST, /* list of ciphers to use */ + STRING_SSL_CIPHER_LIST_PROXY, /* list of ciphers to use */ + STRING_SSL_CIPHER13_LIST, /* list of TLS 1.3 ciphers to use */ + STRING_SSL_CIPHER13_LIST_PROXY, /* list of TLS 1.3 ciphers to use */ + STRING_USERAGENT, /* User-Agent string */ + STRING_SSL_CRLFILE, /* crl file to check certificate */ + STRING_SSL_CRLFILE_PROXY, /* crl file to check certificate */ + STRING_SSL_ISSUERCERT, /* issuer cert file to check certificate */ + STRING_SSL_ISSUERCERT_PROXY, /* issuer cert file to check certificate */ + STRING_SSL_ENGINE, /* name of ssl engine */ + STRING_USERNAME, /* <username>, if used */ + STRING_PASSWORD, /* <password>, if used */ + STRING_OPTIONS, /* <options>, if used */ + STRING_PROXYUSERNAME, /* Proxy <username>, if used */ + STRING_PROXYPASSWORD, /* Proxy <password>, if used */ + STRING_NOPROXY, /* List of hosts which should not use the proxy, if + used */ + STRING_RTSP_SESSION_ID, /* Session ID to use */ + STRING_RTSP_STREAM_URI, /* Stream URI for this request */ + STRING_RTSP_TRANSPORT, /* Transport for this session */ + STRING_SSH_PRIVATE_KEY, /* path to the private key file for auth */ + STRING_SSH_PUBLIC_KEY, /* path to the public key file for auth */ + STRING_SSH_HOST_PUBLIC_KEY_MD5, /* md5 of host public key in ascii hex */ + STRING_SSH_HOST_PUBLIC_KEY_SHA256, /* sha256 of host public key in base64 */ + STRING_SSH_KNOWNHOSTS, /* file name of knownhosts file */ + STRING_PROXY_SERVICE_NAME, /* Proxy service name */ + STRING_SERVICE_NAME, /* Service name */ + STRING_MAIL_FROM, + STRING_MAIL_AUTH, + STRING_TLSAUTH_USERNAME, /* TLS auth <username> */ + STRING_TLSAUTH_USERNAME_PROXY, /* TLS auth <username> */ + STRING_TLSAUTH_PASSWORD, /* TLS auth <password> */ + STRING_TLSAUTH_PASSWORD_PROXY, /* TLS auth <password> */ + STRING_BEARER, /* <bearer>, if used */ + STRING_UNIX_SOCKET_PATH, /* path to Unix socket, if used */ + STRING_TARGET, /* CURLOPT_REQUEST_TARGET */ + STRING_DOH, /* CURLOPT_DOH_URL */ + STRING_ALTSVC, /* CURLOPT_ALTSVC */ + STRING_HSTS, /* CURLOPT_HSTS */ + STRING_SASL_AUTHZID, /* CURLOPT_SASL_AUTHZID */ + STRING_DNS_SERVERS, + STRING_DNS_INTERFACE, + STRING_DNS_LOCAL_IP4, + STRING_DNS_LOCAL_IP6, + STRING_SSL_EC_CURVES, + + /* -- end of null-terminated strings -- */ + + STRING_LASTZEROTERMINATED, + + /* -- below this are pointers to binary data that cannot be strdup'ed. --- */ + + STRING_COPYPOSTFIELDS, /* if POST, set the fields' values here */ + + STRING_AWS_SIGV4, /* Parameters for V4 signature */ + + STRING_LAST /* not used, just an end-of-list marker */ +}; + +enum dupblob { + BLOB_CERT, + BLOB_CERT_PROXY, + BLOB_KEY, + BLOB_KEY_PROXY, + BLOB_SSL_ISSUERCERT, + BLOB_SSL_ISSUERCERT_PROXY, + BLOB_CAINFO, + BLOB_CAINFO_PROXY, + BLOB_LAST +}; + +/* callback that gets called when this easy handle is completed within a multi + handle. Only used for internally created transfers, like for example + DoH. */ +typedef int (*multidone_func)(struct Curl_easy *easy, CURLcode result); + +struct UserDefined { + FILE *err; /* the stderr user data goes here */ + void *debugdata; /* the data that will be passed to fdebug */ + char *errorbuffer; /* (Static) store failure messages in here */ + void *out; /* CURLOPT_WRITEDATA */ + void *in_set; /* CURLOPT_READDATA */ + void *writeheader; /* write the header to this if non-NULL */ + unsigned short proxyport; /* If non-zero, use this port number by + default. If the proxy string features a + ":[port]" that one will override this. */ + unsigned short use_port; /* which port to use (when not using default) */ + unsigned long httpauth; /* kind of HTTP authentication to use (bitmask) */ + unsigned long proxyauth; /* kind of proxy authentication to use (bitmask) */ +#ifndef CURL_DISABLE_PROXY + unsigned char socks5auth;/* kind of SOCKS5 authentication to use (bitmask) */ +#endif + long maxredirs; /* maximum no. of http(s) redirects to follow, set to -1 + for infinity */ + + void *postfields; /* if POST, set the fields' values here */ + curl_seek_callback seek_func; /* function that seeks the input */ + curl_off_t postfieldsize; /* if POST, this might have a size to use instead + of strlen(), and then the data *may* be binary + (contain zero bytes) */ + unsigned short localport; /* local port number to bind to */ + int localportrange; /* number of additional port numbers to test in case the + 'localport' one can't be bind()ed */ + curl_write_callback fwrite_func; /* function that stores the output */ + curl_write_callback fwrite_header; /* function that stores headers */ + curl_write_callback fwrite_rtp; /* function that stores interleaved RTP */ + curl_read_callback fread_func_set; /* function that reads the input */ + curl_progress_callback fprogress; /* OLD and deprecated progress callback */ + curl_xferinfo_callback fxferinfo; /* progress callback */ + curl_debug_callback fdebug; /* function that write informational data */ + curl_ioctl_callback ioctl_func; /* function for I/O control */ + curl_sockopt_callback fsockopt; /* function for setting socket options */ + void *sockopt_client; /* pointer to pass to the socket options callback */ + curl_opensocket_callback fopensocket; /* function for checking/translating + the address and opening the + socket */ + void *opensocket_client; + curl_closesocket_callback fclosesocket; /* function for closing the + socket */ + void *closesocket_client; + curl_prereq_callback fprereq; /* pre-initial request callback */ + void *prereq_userp; /* pre-initial request user data */ + + void *seek_client; /* pointer to pass to the seek callback */ +#ifndef CURL_DISABLE_HSTS + curl_hstsread_callback hsts_read; + void *hsts_read_userp; + curl_hstswrite_callback hsts_write; + void *hsts_write_userp; +#endif + void *progress_client; /* pointer to pass to the progress callback */ + void *ioctl_client; /* pointer to pass to the ioctl callback */ + unsigned int timeout; /* ms, 0 means no timeout */ + unsigned int connecttimeout; /* ms, 0 means no timeout */ + unsigned int happy_eyeballs_timeout; /* ms, 0 is a valid value */ + unsigned int server_response_timeout; /* ms, 0 means no timeout */ + long maxage_conn; /* in seconds, max idle time to allow a connection that + is to be reused */ + long maxlifetime_conn; /* in seconds, max time since creation to allow a + connection that is to be reused */ +#ifndef CURL_DISABLE_TFTP + long tftp_blksize; /* in bytes, 0 means use default */ +#endif + curl_off_t filesize; /* size of file to upload, -1 means unknown */ + long low_speed_limit; /* bytes/second */ + long low_speed_time; /* number of seconds */ + curl_off_t max_send_speed; /* high speed limit in bytes/second for upload */ + curl_off_t max_recv_speed; /* high speed limit in bytes/second for + download */ + curl_off_t set_resume_from; /* continue [ftp] transfer from here */ + struct curl_slist *headers; /* linked list of extra headers */ + struct curl_slist *proxyheaders; /* linked list of extra CONNECT headers */ + struct curl_httppost *httppost; /* linked list of old POST data */ + curl_mimepart mimepost; /* MIME/POST data. */ + struct curl_slist *quote; /* after connection is established */ + struct curl_slist *postquote; /* after the transfer */ + struct curl_slist *prequote; /* before the transfer, after type */ + struct curl_slist *source_quote; /* 3rd party quote */ + struct curl_slist *source_prequote; /* in 3rd party transfer mode - before + the transfer on source host */ + struct curl_slist *source_postquote; /* in 3rd party transfer mode - after + the transfer on source host */ +#ifndef CURL_DISABLE_TELNET + struct curl_slist *telnet_options; /* linked list of telnet options */ +#endif + struct curl_slist *resolve; /* list of names to add/remove from + DNS cache */ + struct curl_slist *connect_to; /* list of host:port mappings to override + the hostname and port to connect to */ + time_t timevalue; /* what time to compare with */ + unsigned char timecondition; /* kind of time comparison: curl_TimeCond */ + unsigned char proxytype; /* what kind of proxy: curl_proxytype */ + unsigned char method; /* what kind of HTTP request: Curl_HttpReq */ + unsigned char httpwant; /* when non-zero, a specific HTTP version requested + to be used in the library's request(s) */ + struct ssl_config_data ssl; /* user defined SSL stuff */ +#ifndef CURL_DISABLE_PROXY + struct ssl_config_data proxy_ssl; /* user defined SSL stuff for proxy */ +#endif + struct ssl_general_config general_ssl; /* general user defined SSL stuff */ + int dns_cache_timeout; /* DNS cache timeout (seconds) */ + unsigned int buffer_size; /* size of receive buffer to use */ + unsigned int upload_buffer_size; /* size of upload buffer to use, + keep it >= CURL_MAX_WRITE_SIZE */ + void *private_data; /* application-private data */ + struct curl_slist *http200aliases; /* linked list of aliases for http200 */ + unsigned char ipver; /* the CURL_IPRESOLVE_* defines in the public header + file 0 - whatever, 1 - v2, 2 - v6 */ + curl_off_t max_filesize; /* Maximum file size to download */ +#ifndef CURL_DISABLE_FTP + unsigned char ftp_filemethod; /* how to get to a file: curl_ftpfile */ + unsigned char ftpsslauth; /* what AUTH XXX to try: curl_ftpauth */ + unsigned char ftp_ccc; /* FTP CCC options: curl_ftpccc */ + unsigned int accepttimeout; /* in milliseconds, 0 means no timeout */ +#endif + /* Desppie the name ftp_create_missing_dirs is for FTP(S) and SFTP + 1 - create directories that don't exist + 2 - the same but also allow MKD to fail once + */ + unsigned char ftp_create_missing_dirs; +#ifdef USE_LIBSSH2 + curl_sshhostkeycallback ssh_hostkeyfunc; /* hostkey check callback */ + void *ssh_hostkeyfunc_userp; /* custom pointer to callback */ +#endif + + curl_sshkeycallback ssh_keyfunc; /* key matching callback */ + void *ssh_keyfunc_userp; /* custom pointer to callback */ +#ifndef CURL_DISABLE_NETRC + unsigned char use_netrc; /* enum CURL_NETRC_OPTION values */ +#endif + curl_usessl use_ssl; /* if AUTH TLS is to be attempted etc, for FTP or + IMAP or POP3 or others! */ + unsigned int new_file_perms; /* when creating remote files */ + unsigned int new_directory_perms; /* when creating remote dirs */ + int ssh_auth_types; /* allowed SSH auth types */ + char *str[STRING_LAST]; /* array of strings, pointing to allocated memory */ + struct curl_blob *blobs[BLOB_LAST]; +#ifdef ENABLE_IPV6 + unsigned int scope_id; /* Scope id for IPv6 */ +#endif + curl_prot_t allowed_protocols; + curl_prot_t redir_protocols; + unsigned int mime_options; /* Mime option flags. */ + +#ifndef CURL_DISABLE_RTSP + void *rtp_out; /* write RTP to this if non-NULL */ + /* Common RTSP header options */ + Curl_RtspReq rtspreq; /* RTSP request type */ +#endif +#ifndef CURL_DISABLE_FTP + curl_chunk_bgn_callback chunk_bgn; /* called before part of transfer + starts */ + curl_chunk_end_callback chunk_end; /* called after part transferring + stopped */ + curl_fnmatch_callback fnmatch; /* callback to decide which file corresponds + to pattern (e.g. if WILDCARDMATCH is on) */ + void *fnmatch_data; +#endif + long gssapi_delegation; /* GSS-API credential delegation, see the + documentation of CURLOPT_GSSAPI_DELEGATION */ + + int tcp_keepidle; /* seconds in idle before sending keepalive probe */ + int tcp_keepintvl; /* seconds between TCP keepalive probes */ + + size_t maxconnects; /* Max idle connections in the connection cache */ + + long expect_100_timeout; /* in milliseconds */ +#ifdef USE_HTTP2 + struct Curl_easy *stream_depends_on; + int stream_weight; + struct Curl_http2_dep *stream_dependents; +#endif + curl_resolver_start_callback resolver_start; /* optional callback called + before resolver start */ + void *resolver_start_client; /* pointer to pass to resolver start callback */ + long upkeep_interval_ms; /* Time between calls for connection upkeep. */ + multidone_func fmultidone; +#ifndef CURL_DISABLE_DOH + struct Curl_easy *dohfor; /* this is a DoH request for that transfer */ +#endif + CURLU *uh; /* URL handle for the current parsed URL */ + void *trailer_data; /* pointer to pass to trailer data callback */ + curl_trailer_callback trailer_callback; /* trailing data callback */ + char keep_post; /* keep POSTs as POSTs after a 30x request; each + bit represents a request, from 301 to 303 */ +#ifndef CURL_DISABLE_SMTP + struct curl_slist *mail_rcpt; /* linked list of mail recipients */ + BIT(mail_rcpt_allowfails); /* allow RCPT TO command to fail for some + recipients */ +#endif + unsigned char connect_only; /* make connection/request, then let + application use the socket */ + BIT(is_fread_set); /* has read callback been set to non-NULL? */ +#ifndef CURL_DISABLE_TFTP + BIT(tftp_no_options); /* do not send TFTP options requests */ +#endif + BIT(sep_headers); /* handle host and proxy headers separately */ + BIT(cookiesession); /* new cookie session? */ + BIT(crlf); /* convert crlf on ftp upload(?) */ + BIT(ssh_compression); /* enable SSH compression */ + +/* Here follows boolean settings that define how to behave during + this session. They are STATIC, set by libcurl users or at least initially + and they don't change during operations. */ + BIT(quick_exit); /* set 1L when it is okay to leak things (like + threads), as we're about to exit() anyway and + don't want lengthy cleanups to delay termination, + e.g. after a DNS timeout */ + BIT(get_filetime); /* get the time and get of the remote file */ + BIT(tunnel_thru_httpproxy); /* use CONNECT through an HTTP proxy */ + BIT(prefer_ascii); /* ASCII rather than binary */ + BIT(remote_append); /* append, not overwrite, on upload */ + BIT(list_only); /* list directory */ +#ifndef CURL_DISABLE_FTP + BIT(ftp_use_port); /* use the FTP PORT command */ + BIT(ftp_use_epsv); /* if EPSV is to be attempted or not */ + BIT(ftp_use_eprt); /* if EPRT is to be attempted or not */ + BIT(ftp_use_pret); /* if PRET is to be used before PASV or not */ + BIT(ftp_skip_ip); /* skip the IP address the FTP server passes on to + us */ + BIT(wildcard_enabled); /* enable wildcard matching */ +#endif + BIT(hide_progress); /* don't use the progress meter */ + BIT(http_fail_on_error); /* fail on HTTP error codes >= 400 */ + BIT(http_keep_sending_on_error); /* for HTTP status codes >= 300 */ + BIT(http_follow_location); /* follow HTTP redirects */ + BIT(http_transfer_encoding); /* request compressed HTTP transfer-encoding */ + BIT(allow_auth_to_other_hosts); + BIT(include_header); /* include received protocol headers in data output */ + BIT(http_set_referer); /* is a custom referer used */ + BIT(http_auto_referer); /* set "correct" referer when following + location: */ + BIT(opt_no_body); /* as set with CURLOPT_NOBODY */ + BIT(upload); /* upload request */ + BIT(verbose); /* output verbosity */ + BIT(krb); /* Kerberos connection requested */ + BIT(reuse_forbid); /* forbidden to be reused, close after use */ + BIT(reuse_fresh); /* do not re-use an existing connection */ + BIT(no_signal); /* do not use any signal/alarm handler */ + BIT(tcp_nodelay); /* whether to enable TCP_NODELAY or not */ + BIT(ignorecl); /* ignore content length */ + BIT(http_te_skip); /* pass the raw body data to the user, even when + transfer-encoded (chunked, compressed) */ + BIT(http_ce_skip); /* pass the raw body data to the user, even when + content-encoded (chunked, compressed) */ + BIT(proxy_transfer_mode); /* set transfer mode (;type=<a|i>) when doing + FTP via an HTTP proxy */ +#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI) + BIT(socks5_gssapi_nec); /* Flag to support NEC SOCKS5 server */ +#endif + BIT(sasl_ir); /* Enable/disable SASL initial response */ + BIT(tcp_keepalive); /* use TCP keepalives */ + BIT(tcp_fastopen); /* use TCP Fast Open */ + BIT(ssl_enable_alpn);/* TLS ALPN extension? */ + BIT(path_as_is); /* allow dotdots? */ + BIT(pipewait); /* wait for multiplex status before starting a new + connection */ + BIT(suppress_connect_headers); /* suppress proxy CONNECT response headers + from user callbacks */ + BIT(dns_shuffle_addresses); /* whether to shuffle addresses before use */ + BIT(stream_depends_e); /* set or don't set the Exclusive bit */ + BIT(haproxyprotocol); /* whether to send HAProxy PROXY protocol v1 + header */ + BIT(abstract_unix_socket); + BIT(disallow_username_in_url); /* disallow username in url */ +#ifndef CURL_DISABLE_DOH + BIT(doh); /* DNS-over-HTTPS enabled */ + BIT(doh_verifypeer); /* DoH certificate peer verification */ + BIT(doh_verifyhost); /* DoH certificate hostname verification */ + BIT(doh_verifystatus); /* DoH certificate status verification */ +#endif + BIT(http09_allowed); /* allow HTTP/0.9 responses */ +#ifdef USE_WEBSOCKETS + BIT(ws_raw_mode); +#endif +}; + +struct Names { + struct Curl_hash *hostcache; + enum { + HCACHE_NONE, /* not pointing to anything */ + HCACHE_MULTI, /* points to a shared one in the multi handle */ + HCACHE_SHARED /* points to a shared one in a shared object */ + } hostcachetype; +}; + +/* + * The 'connectdata' struct MUST have all the connection oriented stuff as we + * may have several simultaneous connections and connection structs in memory. + * + * The 'struct UserDefined' must only contain data that is set once to go for + * many (perhaps) independent connections. Values that are generated or + * calculated internally for the "session handle" must be defined within the + * 'struct UrlState' instead. + */ + +struct Curl_easy { + /* First a simple identifier to easier detect if a user mix up this easy + handle with a multi handle. Set this to CURLEASY_MAGIC_NUMBER */ + unsigned int magic; + + /* first, two fields for the linked list of these */ + struct Curl_easy *next; + struct Curl_easy *prev; + + struct connectdata *conn; + struct Curl_llist_element connect_queue; + struct Curl_llist_element conn_queue; /* list per connectdata */ + + CURLMstate mstate; /* the handle's state */ + CURLcode result; /* previous result */ + + struct Curl_message msg; /* A single posted message. */ + + /* Array with the plain socket numbers this handle takes care of, in no + particular order. Note that all sockets are added to the sockhash, where + the state etc are also kept. This array is mostly used to detect when a + socket is to be removed from the hash. See singlesocket(). */ + curl_socket_t sockets[MAX_SOCKSPEREASYHANDLE]; + unsigned char actions[MAX_SOCKSPEREASYHANDLE]; /* action for each socket in + sockets[] */ + int numsocks; + + struct Names dns; + struct Curl_multi *multi; /* if non-NULL, points to the multi handle + struct to which this "belongs" when used by + the multi interface */ + struct Curl_multi *multi_easy; /* if non-NULL, points to the multi handle + struct to which this "belongs" when used + by the easy interface */ + struct Curl_share *share; /* Share, handles global variable mutexing */ +#ifdef USE_LIBPSL + struct PslCache *psl; /* The associated PSL cache. */ +#endif + struct SingleRequest req; /* Request-specific data */ + struct UserDefined set; /* values set by the libcurl user */ +#ifndef CURL_DISABLE_COOKIES + struct CookieInfo *cookies; /* the cookies, read from files and servers. + NOTE that the 'cookie' field in the + UserDefined struct defines if the "engine" + is to be used or not. */ +#endif +#ifndef CURL_DISABLE_HSTS + struct hsts *hsts; +#endif +#ifndef CURL_DISABLE_ALTSVC + struct altsvcinfo *asi; /* the alt-svc cache */ +#endif + struct Progress progress; /* for all the progress meter data */ + struct UrlState state; /* struct for fields used for state info and + other dynamic purposes */ +#ifndef CURL_DISABLE_FTP + struct WildcardData wildcard; /* wildcard download state info */ +#endif + struct PureInfo info; /* stats, reports and info data */ + struct curl_tlssessioninfo tsi; /* Information about the TLS session, only + valid after a client has asked for it */ +#ifdef USE_HYPER + struct hyptransfer hyp; +#endif +}; + +#define LIBCURL_NAME "libcurl" + +#endif /* HEADER_CURL_URLDATA_H */ |