diff options
Diffstat (limited to 'Utilities/cmcurl/urldata.h')
| -rw-r--r-- | Utilities/cmcurl/urldata.h | 962 |
1 files changed, 962 insertions, 0 deletions
diff --git a/Utilities/cmcurl/urldata.h b/Utilities/cmcurl/urldata.h new file mode 100644 index 0000000000..07aff9b093 --- /dev/null +++ b/Utilities/cmcurl/urldata.h @@ -0,0 +1,962 @@ +#ifndef __URLDATA_H +#define __URLDATA_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + * $Id$ + ***************************************************************************/ + +/* This file is for lib internal stuff */ + +#include "setup.h" + +#define PORT_FTP 21 +#define PORT_FTPS 990 +#define PORT_TELNET 23 +#define PORT_GOPHER 70 +#define PORT_HTTP 80 +#define PORT_HTTPS 443 +#define PORT_DICT 2628 +#define PORT_LDAP 389 + +#define DICT_MATCH "/MATCH:" +#define DICT_MATCH2 "/M:" +#define DICT_MATCH3 "/FIND:" +#define DICT_DEFINE "/DEFINE:" +#define DICT_DEFINE2 "/D:" +#define DICT_DEFINE3 "/LOOKUP:" + +#define CURL_DEFAULT_USER "anonymous" +#define CURL_DEFAULT_PASSWORD "curl_by_daniel@haxx.se" + +#include "cookie.h" +#include "formdata.h" + +#ifdef USE_SSLEAY +/* SSLeay stuff usually in /usr/local/ssl/include */ +#ifdef USE_OPENSSL +#include "openssl/rsa.h" +#include "openssl/crypto.h" +#include "openssl/x509.h" +#include "openssl/pem.h" +#include "openssl/ssl.h" +#include "openssl/err.h" +#ifdef HAVE_OPENSSL_ENGINE_H +#include <openssl/engine.h> +#endif +#else +#include "rsa.h" +#include "crypto.h" +#include "x509.h" +#include "pem.h" +#include "ssl.h" +#include "err.h" +#endif +#endif + +#ifdef HAVE_NETINET_IN_H +#include <netinet/in.h> +#endif + +#include "timeval.h" + +#ifdef HAVE_ZLIB_H +#include <zlib.h> /* for content-encoding */ +#endif + +#ifdef CURL_SPECIAL_ZLIB_H +#include CURL_SPECIAL_ZLIB_H +#endif + +#ifdef USE_ARES +#include <ares.h> +#endif + +#include <curl/curl.h> + +#include "http_chunks.h" /* for the structs and enum stuff */ +#include "hostip.h" +#include "hash.h" + +#ifdef HAVE_GSSAPI +#ifdef HAVE_GSSMIT +#include <gssapi/gssapi.h> +#include <gssapi/gssapi_generic.h> +#else +#include <gssapi.h> +#endif +#endif + +/* Download buffer size, keep it fairly big for speed reasons */ +#define BUFSIZE CURL_MAX_WRITE_SIZE + +/* Initial size of the buffer to store headers in, it'll be enlarged in case + of need. */ +#define HEADERSIZE 256 + +/* Just a convenience macro to get the larger value out of two given. + We prefix with CURL to prevent name collisions. */ +#define CURLMAX(x,y) ((x)>(y)?(x):(y)) + +#ifdef HAVE_KRB4 +/* Types needed for krb4-ftp connections */ +struct krb4buffer { + void *data; + size_t size; + size_t index; + int eof_flag; +}; +enum protection_level { + prot_clear, + prot_safe, + prot_confidential, + prot_private +}; +#endif + +/* struct for data related to each SSL connection */ +struct ssl_connect_data { + bool use; /* use ssl encrypted communications TRUE/FALSE */ +#ifdef USE_SSLEAY + /* these ones requires specific SSL-types */ + SSL_CTX* ctx; + SSL* handle; + X509* server_cert; +#endif /* USE_SSLEAY */ +}; + +struct ssl_config_data { + long version; /* what version the client wants to use */ + long certverifyresult; /* result from the certificate verification */ + long verifypeer; /* set TRUE if this is desired */ + long verifyhost; /* 0: no verify + 1: check that CN exists + 2: CN must match hostname */ + char *CApath; /* DOES NOT WORK ON WINDOWS */ + char *CAfile; /* cerficate to verify peer against */ + char *random_file; /* path to file containing "random" data */ + char *egdsocket; /* path to file containing the EGD daemon socket */ + char *cipher_list; /* list of ciphers to use */ + long numsessions; /* SSL session id cache size */ + curl_ssl_ctx_callback fsslctx; /* function to initialize ssl ctx */ + void *fsslctxp; /*parameter for call back */ +}; + +/* information stored about one single SSL session */ +struct curl_ssl_session { + char *name; /* host name for which this ID was used */ + void *sessionid; /* as returned from the SSL layer */ + long age; /* just a number, the higher the more recent */ + unsigned short remote_port; /* remote port to connect to */ + struct ssl_config_data ssl_config; /* setup for this session */ +}; + +/* Struct used for Digest challenge-response authentication */ +struct digestdata { + char *nonce; + char *cnonce; + char *realm; + int algo; + bool stale; /* set true for re-negotiation */ + char *opaque; + char *qop; + char *algorithm; + int nc; /* nounce count */ +}; + +typedef enum { + NTLMSTATE_NONE, + NTLMSTATE_TYPE1, + NTLMSTATE_TYPE2, + NTLMSTATE_TYPE3, + NTLMSTATE_LAST +} curlntlm; + +/* for 3rd party transfers to decide which side that issues PASV */ +typedef enum { + CURL_TARGET_PASV, + CURL_SOURCE_PASV +} curl_pasv_side; + +/* Struct used for NTLM challenge-response authentication */ +struct ntlmdata { + curlntlm state; + unsigned char nonce[8]; +}; + +#ifdef HAVE_GSSAPI +struct negotiatedata { + bool gss; /* Whether we're processing GSS-Negotiate or Negotiate */ + const char* protocol; /* "GSS-Negotiate" or "Negotiate" */ + OM_uint32 status; + gss_ctx_id_t context; + gss_name_t server_name; + gss_buffer_desc output_token; +}; +#endif + +/**************************************************************************** + * HTTP unique setup + ***************************************************************************/ +struct HTTP { + struct FormData *sendit; + curl_off_t postsize; /* off_t to handle large file sizes */ + char *postdata; + + const char *p_pragma; /* Pragma: string */ + const char *p_accept; /* Accept: string */ + curl_off_t readbytecount; + curl_off_t writebytecount; + + /* For FORM posting */ + struct Form form; + struct Curl_chunker chunk; + + struct back { + curl_read_callback fread; /* backup storage for fread pointer */ + void *fread_in; /* backup storage for fread_in pointer */ + char *postdata; + curl_off_t postsize; + } backup; + + enum { + HTTPSEND_NADA, /* init */ + HTTPSEND_REQUEST, /* sending a request */ + HTTPSEND_BODY, /* sending body */ + HTTPSEND_LAST /* never use this */ + } sending; + + void *send_buffer; /* used if the request couldn't be sent in one chunk, + points to an allocated send_buffer struct */ +}; + +/**************************************************************************** + * FTP unique setup + ***************************************************************************/ +struct FTP { + curl_off_t *bytecountp; + char *user; /* user name string */ + char *passwd; /* password string */ + char *urlpath; /* the originally given path part of the URL */ + char **dirs; /* realloc()ed array for path components */ + int dirdepth; /* number of entries used in the 'dirs' array */ + int diralloc; /* number of entries allocated for the 'dirs' array */ + char *file; /* decoded file */ + + char *entrypath; /* the PWD reply when we logged on */ + + char *cache; /* data cache between getresponse()-calls */ + curl_off_t cache_size; /* size of cache in bytes */ + bool dont_check; /* Set to TRUE to prevent the final (post-transfer) + file size and 226/250 status check. It should still + read the line, just ignore the result. */ + bool no_transfer; /* nothing was transfered, (possibly because a resumed + transfer already was complete) */ + long response_time; /* When no timeout is given, this is the amount of + seconds we await for an FTP response. Initialized + in Curl_ftp_connect() */ + bool ctl_valid; /* Tells Curl_ftp_quit() whether or not to do + anything. If the connection has timed out or + been closed, this should be FALSE when it gets + to Curl_ftp_quit() */ +}; + +/**************************************************************************** + * FILE unique setup + ***************************************************************************/ +struct FILEPROTO { + char *path; /* the path we operate on */ + char *freepath; /* pointer to the allocated block we must free, this might + differ from the 'path' pointer */ + int fd; /* open file descriptor to read from! */ +}; + +/* + * Boolean values that concerns this connection. + */ +struct ConnectBits { + bool close; /* if set, we close the connection after this request */ + bool reuse; /* if set, this is a re-used connection */ + bool chunk; /* if set, this is a chunked transfer-encoding */ + bool httpproxy; /* if set, this transfer is done through a http proxy */ + bool user_passwd; /* do we use user+password for this connection? */ + bool proxy_user_passwd; /* user+password for the proxy? */ + bool ipv6_ip; /* we communicate with a remove site specified with pure IPv6 + IP address */ + bool use_range; + bool rangestringalloc; /* the range string is malloc()'ed */ + + bool do_more; /* this is set TRUE if the ->curl_do_more() function is + supposed to be called, after ->curl_do() */ + + bool upload_chunky; /* set TRUE if we are doing chunked transfer-encoding + on upload */ + bool getheader; /* TRUE if header parsing is wanted */ + + bool forbidchunk; /* used only to explicitly forbid chunk-upload for + specific upload buffers. See readmoredata() in + http.c for details. */ + bool tcpconnect; /* the tcp stream (or simimlar) is connected, this + is set the first time on the first connect function + call */ + bool retry; /* this connection is about to get closed and then + re-attempted at another connection. */ + bool no_body; /* CURLOPT_NO_BODY (or similar) was set */ + bool tunnel_proxy; /* if CONNECT is used to "tunnel" through the proxy. + This is implicit when SSL-protocols are used through + proxies, but can also be enabled explicitly by + apps */ + bool authprobe; /* set TRUE when this transfer is done to probe for auth + types, as when asking for "any" type when speaking + HTTP */ +}; + +struct hostname { + char *rawalloc; /* allocated "raw" version of the name */ + char *encalloc; /* allocated IDN-encoded version of the name */ + char *name; /* name to use internally, might be encoded, might be raw */ + char *dispname; /* name to display, as 'name' might be encoded */ +}; + +/* + * This struct is all the previously local variables from Curl_perform() moved + * to struct to allow the function to return and get re-invoked better without + * losing state. + */ + +struct Curl_transfer_keeper { + curl_off_t bytecount; /* total number of bytes read */ + curl_off_t writebytecount; /* number of bytes written */ + struct timeval start; /* transfer started at this time */ + struct timeval now; /* current time */ + bool header; /* incoming data has HTTP header */ + enum { + HEADER_NORMAL, /* no bad header at all */ + HEADER_PARTHEADER, /* part of the chunk is a bad header, the rest + is normal data */ + HEADER_ALLBAD /* all was believed to be header */ + } badheader; /* the header was deemed bad and will be + written as body */ + int headerline; /* counts header lines to better track the + first one */ + char *hbufp; /* points at *end* of header line */ + size_t hbuflen; + char *str; /* within buf */ + char *str_start; /* within buf */ + char *end_ptr; /* within buf */ + char *p; /* within headerbuff */ + bool content_range; /* set TRUE if Content-Range: was found */ + curl_off_t offset; /* possible resume offset read from the + Content-Range: header */ + int httpcode; /* error code from the 'HTTP/1.? XXX' line */ + int httpversion; /* the HTTP version*10 */ + struct timeval start100; /* time stamp to wait for the 100 code from */ + bool write_after_100_header; /* TRUE = we enable the write after we + received a 100-continue/timeout or + FALSE = directly */ + bool wait100_after_headers; /* TRUE = after the request-headers have been + sent off properly, we go into the wait100 + state, FALSE = don't */ + int content_encoding; /* What content encoding. sec 3.5, RFC2616. */ + +#define IDENTITY 0 /* No encoding */ +#define DEFLATE 1 /* zlib delfate [RFC 1950 & 1951] */ +#define GZIP 2 /* gzip algorithm [RFC 1952] */ +#define COMPRESS 3 /* Not handled, added for completeness */ + +#ifdef HAVE_LIBZ + bool zlib_init; /* True if zlib already initialized; + undefined if Content-Encoding header. */ + z_stream z; /* State structure for zlib. */ +#endif + + time_t timeofdoc; + long bodywrites; + + char *buf; + char *uploadbuf; + curl_socket_t maxfd; + + /* pointers to the actual descriptors we check */ + fd_set *readfdp; + fd_set *writefdp; + + /* the file descriptors to play with */ + fd_set readfd; + fd_set writefd; + fd_set rkeepfd; + fd_set wkeepfd; + int keepon; + + bool upload_done; /* set to TRUE when doing chunked transfer-encoding upload + and we're uploading the last chunk */ + + bool ignorebody; /* we read a response-body but we ignore it! */ +}; + +#if defined(USE_ARES) || defined(USE_THREADING_GETHOSTBYNAME) || \ + defined(USE_THREADING_GETADDRINFO) +struct Curl_async { + char *hostname; + int port; + struct Curl_dns_entry *dns; + bool done; /* set TRUE when the lookup is complete */ + int status; /* if done is TRUE, this is the status from the callback */ + void *os_specific; /* 'struct thread_data' for Windows */ +}; +#endif + +#define FIRSTSOCKET 0 +#define SECONDARYSOCKET 1 + +/* + * The connectdata struct contains all fields and variables that should be + * unique for an entire connection. + */ +struct connectdata { + /**** Fields set when inited and not modified again */ + struct SessionHandle *data; /* link to the root CURL struct */ + long connectindex; /* what index in the connects index this particular + struct has */ + + long protocol; /* PROT_* flags concerning the protocol set */ +#define PROT_MISSING (1<<0) +#define PROT_GOPHER (1<<1) +#define PROT_HTTP (1<<2) +#define PROT_HTTPS (1<<3) +#define PROT_FTP (1<<4) +#define PROT_TELNET (1<<5) +#define PROT_DICT (1<<6) +#define PROT_LDAP (1<<7) +#define PROT_FILE (1<<8) +#define PROT_FTPS (1<<9) +#define PROT_SSL (1<<10) /* protocol requires SSL */ + + /* the particular host we use, in two different ways */ + struct Curl_dns_entry *dns_entry; + Curl_addrinfo *ip_addr; /* the particular IP we connected to */ + + char protostr[16]; /* store the protocol string in this buffer */ + + struct hostname host; + struct hostname proxy; + + char *pathbuffer;/* allocated buffer to store the URL's path part in */ + char *path; /* path to use, points to somewhere within the pathbuffer + area */ + long port; /* which port to use locally */ + unsigned short remote_port; /* what remote port to connect to, + not the proxy port! */ + curl_off_t bytecount; + long headerbytecount; /* only count received headers */ + long deductheadercount; /* this amount of bytes doesn't count when we check + if anything has been transfered at the end of + a connection. We use this counter to make only + a 100 reply (without a following second response + code) result in a CURLE_GOT_NOTHING error code */ + + char *range; /* range, if used. See README for detailed specification on + this syntax. */ + curl_off_t resume_from; /* continue [ftp] transfer from here */ + + char *user; /* user name string, allocated */ + char *passwd; /* password string, allocated */ + + char *proxyuser; /* proxy user name string, allocated */ + char *proxypasswd; /* proxy password string, allocated */ + + struct timeval now; /* "current" time */ + struct timeval created; /* creation time */ + curl_socket_t sock[2]; /* two sockets, the second is used for the data + transfer when doing FTP */ + curl_off_t maxdownload; /* in bytes, the maximum amount of data to fetch, 0 + means unlimited */ + + struct ssl_connect_data ssl[2]; /* this is for ssl-stuff */ + struct ssl_config_data ssl_config; + + struct ConnectBits bits; /* various state-flags for this connection */ + + /* These two functions MUST be set by the curl_connect() function to be + be protocol dependent */ + CURLcode (*curl_do)(struct connectdata *); + CURLcode (*curl_done)(struct connectdata *, CURLcode); + + /* If the curl_do() function is better made in two halves, this + * curl_do_more() function will be called afterwards, if set. For example + * for doing the FTP stuff after the PASV/PORT command. + */ + CURLcode (*curl_do_more)(struct connectdata *); + + /* This function *MAY* be set to a protocol-dependent function that is run + * after the connect() and everything is done, as a step in the connection. + */ + CURLcode (*curl_connect)(struct connectdata *); + + /* This function *MAY* be set to a protocol-dependent function that is run + * by the curl_disconnect(), as a step in the disconnection. + */ + CURLcode (*curl_disconnect)(struct connectdata *); + + /* This function *MAY* be set to a protocol-dependent function that is run + * in the curl_close() function if protocol-specific cleanups are required. + */ + CURLcode (*curl_close)(struct connectdata *); + + /**** curl_get() phase fields */ + + /* READ stuff */ + curl_socket_t sockfd; /* socket to read from or CURL_SOCKET_BAD */ + curl_off_t size; /* -1 if unknown at this point */ + curl_off_t *bytecountp; /* return number of bytes read or NULL */ + + /* WRITE stuff */ + curl_socket_t writesockfd; /* socket to write to, it may very + well be the same we read from. + CURL_SOCKET_BAD disables */ + curl_off_t *writebytecountp; /* return number of bytes written or NULL */ + + /** Dynamicly allocated strings, may need to be freed before this **/ + /** struct is killed. **/ + struct dynamically_allocated_data { + char *proxyuserpwd; /* free later if not NULL! */ + char *uagent; /* free later if not NULL! */ + char *accept_encoding; /* free later if not NULL! */ + char *userpwd; /* free later if not NULL! */ + char *rangeline; /* free later if not NULL! */ + char *ref; /* free later if not NULL! */ + char *host; /* free later if not NULL */ + char *cookiehost; /* free later if not NULL */ + } allocptr; + + char *newurl; /* This can only be set if a Location: was in the + document headers */ + +#ifdef HAVE_KRB4 + enum protection_level command_prot; + enum protection_level data_prot; + enum protection_level request_data_prot; + + size_t buffer_size; + + struct krb4buffer in_buffer, out_buffer; + int sec_complete; + void *app_data; + + struct Curl_sec_client_mech *mech; + struct sockaddr_in local_addr; + +#endif + + /*************** Request - specific items ************/ + /* previously this was in the urldata struct */ + union { + struct HTTP *http; + struct HTTP *gopher; /* alias, just for the sake of being more readable */ + struct HTTP *https; /* alias, just for the sake of being more readable */ + struct FTP *ftp; + struct FILEPROTO *file; + void *telnet; /* private for telnet.c-eyes only */ + void *generic; + } proto; + + /* This struct is inited when needed */ + struct Curl_transfer_keeper keep; + + /* 'upload_present' is used to keep a byte counter of how much data there is + still left in the buffer, aimed for upload. */ + ssize_t upload_present; + + /* 'upload_fromhere' is used as a read-pointer when we uploaded parts of a + buffer, so the next read should read from where this pointer points to, + and the 'upload_present' contains the number of bytes available at this + position */ + char *upload_fromhere; + + curl_read_callback fread; /* function that reads the input */ + void *fread_in; /* pointer to pass to the fread() above */ + + struct ntlmdata ntlm; /* NTLM differs from other authentication schemes + because it authenticates connections, not + single requests! */ + struct ntlmdata proxyntlm; /* NTLM data for proxy */ + + char syserr_buf [256]; /* buffer for Curl_strerror() */ + +#if defined(USE_ARES) || defined(USE_THREADING_GETHOSTBYNAME) || \ + defined(USE_THREADING_GETADDRINFO) + /* data used for the asynch name resolve callback */ + struct Curl_async async; +#endif + struct connectdata *sec_conn; /* secondary connection for 3rd party + transfer */ +}; + +/* The end of connectdata. */ + +/* + * Struct to keep statistical and informational data. + */ +struct PureInfo { + int httpcode; /* Recent HTTP or FTP response code */ + int httpproxycode; + int httpversion; + long filetime; /* If requested, this is might get set. Set to -1 if the time + was unretrievable. We cannot have this of type time_t, + since time_t is unsigned on several platforms such as + OpenVMS. */ + long header_size; /* size of read header(s) in bytes */ + long request_size; /* the amount of bytes sent in the request(s) */ + + long proxyauthavail; + long httpauthavail; + + char *contenttype; /* the content type of the object */ +}; + + +struct Progress { + long lastshow; /* time() of the last displayed progress meter or NULL to + force redraw at next call */ + curl_off_t size_dl; /* total expected size */ + curl_off_t size_ul; /* total expected size */ + curl_off_t downloaded; /* transfered so far */ + curl_off_t uploaded; /* transfered so far */ + + curl_off_t current_speed; /* uses the currently fastest transfer */ + + bool callback; /* set when progress callback is used */ + int width; /* screen width at download start */ + int flags; /* see progress.h */ + + double timespent; + + curl_off_t dlspeed; + curl_off_t ulspeed; + + double t_nslookup; + double t_connect; + double t_pretransfer; + double t_starttransfer; + double t_redirect; + + struct timeval start; + struct timeval t_startsingle; +#define CURR_TIME (5+1) /* 6 entries for 5 seconds */ + + curl_off_t speeder[ CURR_TIME ]; + struct timeval speeder_time[ CURR_TIME ]; + int speeder_c; +}; + +typedef enum { + HTTPREQ_NONE, /* first in list */ + HTTPREQ_GET, + HTTPREQ_POST, + HTTPREQ_POST_FORM, /* we make a difference internally */ + HTTPREQ_PUT, + HTTPREQ_HEAD, + HTTPREQ_CUSTOM, + HTTPREQ_LAST /* last in list */ +} Curl_HttpReq; + +/* + * Values that are generated, temporary or calculated internally for a + * "session handle" must be defined within the 'struct urlstate'. This struct + * will be used within the SessionHandle struct. When the 'SessionHandle' + * struct is cloned, this data MUST NOT be copied. + * + * Remember that any "state" information goes globally for the curl handle. + * Session-data MUST be put in the connectdata struct and here. */ +#define MAX_CURL_USER_LENGTH 256 +#define MAX_CURL_PASSWORD_LENGTH 256 +#define MAX_CURL_USER_LENGTH_TXT "255" +#define MAX_CURL_PASSWORD_LENGTH_TXT "255" + +struct auth { + long want; /* Bitmask set to the authentication methods wanted by the app + (with CURLOPT_HTTPAUTH or CURLOPT_PROXYAUTH). */ + long picked; + long avail; /* bitmask for what the server reports to support for this + resource */ + bool done; /* TRUE when the auth phase is done and ready to do the *actual* + request */ +}; + +struct UrlState { + enum { + Curl_if_none, + Curl_if_easy, + Curl_if_multi + } used_interface; + + /* buffers to store authentication data in, as parsed from input options */ + struct timeval keeps_speed; /* for the progress meter really */ + + /* 'connects' will be an allocated array with pointers. If the pointer is + set, it holds an allocated connection. */ + struct connectdata **connects; + long numconnects; /* size of the 'connects' array */ + + char *headerbuff; /* allocated buffer to store headers in */ + size_t headersize; /* size of the allocation */ + + char buffer[BUFSIZE+1]; /* download buffer */ + char uploadbuffer[BUFSIZE+1]; /* upload buffer */ + curl_off_t current_speed; /* the ProgressShow() funcion sets this, + bytes / second */ + bool this_is_a_follow; /* this is a followed Location: request */ + + char *auth_host; /* if set, this should be the host name that we will + sent authorization to, no else. Used to make Location: + following not keep sending user+password... This is + strdup() data. + */ + + struct curl_ssl_session *session; /* array of 'numsessions' size */ + long sessionage; /* number of the most recent session */ + + char *scratch; /* huge buffer[BUFSIZE*2] when doing upload CRLF replacing */ + bool errorbuf; /* Set to TRUE if the error buffer is already filled in. + This must be set to FALSE every time _easy_perform() is + called. */ + +#ifdef HAVE_SIGNAL + /* storage for the previous bag^H^H^HSIGPIPE signal handler :-) */ + void (*prev_signal)(int sig); +#endif + bool allow_port; /* Is set.use_port allowed to take effect or not. This + is always set TRUE when curl_easy_perform() is called. */ + + struct digestdata digest; + struct digestdata proxydigest; + +#ifdef HAVE_GSSAPI + struct negotiatedata negotiate; +#endif + + struct auth authhost; + struct auth authproxy; + + bool authproblem; /* TRUE if there's some problem authenticating */ +#ifdef USE_ARES + ares_channel areschannel; /* for name resolves */ +#endif +}; + + +/* + * This 'DynamicStatic' struct defines dynamic states that actually change + * values in the 'UserDefined' area, which MUST be taken into consideration + * if the UserDefined struct is cloned or similar. You can probably just + * copy these, but each one indicate a special action on other data. + */ + +struct DynamicStatic { + char *url; /* work URL, copied from UserDefined */ + bool url_alloc; /* URL string is malloc()'ed */ + bool url_changed; /* set on CURL_OPT_URL, used to detect if the URL was + changed after the connect phase, as we allow callback + to change it and if so, we reconnect to use the new + URL instead */ + char *proxy; /* work proxy, copied from UserDefined */ + bool proxy_alloc; /* http proxy string is malloc()'ed */ + char *referer; /* referer string */ + bool referer_alloc; /* referer sting is malloc()ed */ + struct curl_slist *cookielist; /* list of cookie files set by + curl_easy_setopt(COOKIEFILE) calls */ +}; + +/* + * This 'UserDefined' struct must only contain data that is set once to go + * for many (perhaps) independent connections. Values that are generated or + * calculated internally for the "session handle" MUST be defined within the + * 'struct urlstate' instead. The only exceptions MUST note the changes in + * the 'DynamicStatic' struct. + */ + +struct UserDefined { + FILE *err; /* the stderr user data goes here */ + void *debugdata; /* the data that will be passed to fdebug */ + char *errorbuffer; /* store failure messages in here */ + char *proxyuserpwd; /* Proxy <user:password>, if used */ + long proxyport; /* If non-zero, use this port number by default. If the + proxy string features a ":[port]" that one will override + this. */ + void *out; /* the fetched file goes here */ + void *in; /* the uploaded file is read from here */ + void *writeheader; /* write the header to this is non-NULL */ + char *set_url; /* what original URL to work on */ + char *set_proxy; /* proxy to use */ + long use_port; /* which port to use (when not using default) */ + char *userpwd; /* <user:password>, if used */ + long httpauth; /* what kind of HTTP authentication to use (bitmask) */ + long proxyauth; /* what kind of proxy authentication to use (bitmask) */ + char *set_range; /* range, if used. See README for detailed specification + on this syntax. */ + long followlocation; /* as in HTTP Location: */ + long maxredirs; /* maximum no. of http(s) redirects to follow */ + char *set_referer; /* custom string */ + bool free_referer; /* set TRUE if 'referer' points to a string we + allocated */ + char *useragent; /* User-Agent string */ + char *encoding; /* Accept-Encoding string */ + char *postfields; /* if POST, set the fields' values here */ + curl_off_t postfieldsize; /* if POST, this might have a size to use instead + of strlen(), and then the data *may* be binary + (contain zero bytes) */ + char *ftpport; /* port to send with the FTP PORT command */ + char *device; /* network interface to use */ + curl_write_callback fwrite; /* function that stores the output */ + curl_write_callback fwrite_header; /* function that stores headers */ + curl_read_callback fread; /* function that reads the input */ + curl_progress_callback fprogress; /* function for progress information */ + curl_debug_callback fdebug; /* function that write informational data */ + void *progress_client; /* pointer to pass to the progress callback */ + long timeout; /* in seconds, 0 means no timeout */ + long connecttimeout; /* in seconds, 0 means no timeout */ + long ftp_response_timeout; /* in seconds, 0 means no timeout */ + curl_off_t infilesize; /* size of file to upload, -1 means unknown */ + long low_speed_limit; /* bytes/second */ + long low_speed_time; /* number of seconds */ + curl_off_t set_resume_from; /* continue [ftp] transfer from here */ + char *cookie; /* HTTP cookie string to send */ + struct curl_slist *headers; /* linked list of extra headers */ + struct curl_httppost *httppost; /* linked list of POST data */ + char *cert; /* certificate */ + char *cert_type; /* format for certificate (default: PEM) */ + char *key; /* private key */ + char *key_type; /* format for private key (default: PEM) */ + char *key_passwd; /* plain text private key password */ + char *crypto_engine; /* name of the crypto engine to use */ + char *cookiejar; /* dump all cookies to this file */ + bool cookiesession; /* new cookie session? */ + bool crlf; /* convert crlf on ftp upload(?) */ + struct curl_slist *quote; /* after connection is established */ + struct curl_slist *postquote; /* after the transfer */ + struct curl_slist *prequote; /* before the transfer, after type */ + struct curl_slist *source_prequote; /* in 3rd party transfer mode - before + the transfer on source host */ + struct curl_slist *source_postquote; /* in 3rd party transfer mode - after + the transfer on source host */ + struct curl_slist *telnet_options; /* linked list of telnet options */ + curl_TimeCond timecondition; /* kind of time/date comparison */ + time_t timevalue; /* what time to compare with */ + curl_closepolicy closepolicy; /* connection cache close concept */ + Curl_HttpReq httpreq; /* what kind of HTTP request (if any) is this */ + char *customrequest; /* HTTP/FTP request to use */ + long httpversion; /* when non-zero, a specific HTTP version requested to + be used in the library's request(s) */ + char *auth_host; /* if set, this is the allocated string to the host name + * to which to send the authorization data to, and no other + * host (which location-following otherwise could lead to) + */ + char *krb4_level; /* what security level */ + struct ssl_config_data ssl; /* user defined SSL stuff */ + + curl_proxytype proxytype; /* what kind of proxy that is in use */ + + int dns_cache_timeout; /* DNS cache timeout */ + long buffer_size; /* size of receive buffer to use */ + + char *private; /* Private data */ + + struct curl_slist *http200aliases; /* linked list of aliases for http200 */ + + long ip_version; + + curl_off_t max_filesize; /* Maximum file size to download */ + + char *source_host; /* for 3rd party transfer */ + char *source_port; /* for 3rd party transfer */ + char *source_userpwd; /* for 3rd party transfer */ + char *source_path; /* for 3rd party transfer */ + curl_pasv_side pasvHost; /* for 3rd party transfer indicates passive host */ + +/* Here follows boolean settings that define how to behave during + this session. They are STATIC, set by libcurl users or at least initially + and they don't change during operations. */ + + bool printhost; /* printing host name in debug info */ + bool get_filetime; + bool tunnel_thru_httpproxy; + bool ftp_append; + bool ftp_ascii; + bool ftp_list_only; + bool ftp_create_missing_dirs; + bool ftp_use_port; + bool hide_progress; + bool http_fail_on_error; + bool http_follow_location; + bool http_disable_hostname_check_before_authentication; + bool include_header; /* include received protocol headers in data output */ + bool http_set_referer; + bool http_auto_referer; /* set "correct" referer when following location: */ + bool opt_no_body; /* as set with CURLOPT_NO_BODY */ + bool set_port; + bool upload; + enum CURL_NETRC_OPTION + use_netrc; /* defined in include/curl.h */ + char *netrc_file; /* if not NULL, use this instead of trying to find + $HOME/.netrc */ + bool verbose; + bool krb4; /* kerberos4 connection requested */ + bool reuse_forbid; /* forbidden to be reused, close after use */ + bool reuse_fresh; /* do not re-use an existing connection */ + bool expect100header; /* TRUE if we added Expect: 100-continue */ + bool ftp_use_epsv; /* if EPSV is to be attempted or not */ + bool ftp_use_eprt; /* if EPRT is to be attempted or not */ + curl_ftpssl ftp_ssl; /* if AUTH TLS is to be attempted etc */ + bool no_signal; /* do not use any signal/alarm handler */ + bool global_dns_cache; /* subject for future removal */ + bool tcp_nodelay; /* whether to enable TCP_NODELAY or not */ + +}; + +/* + * In August 2001, this struct was redesigned and is since stricter than + * before. The 'connectdata' struct MUST have all the connection oriented + * stuff as we may now have several simultaneous connections and connection + * structs in memory. + * + * From now on, the 'SessionHandle' must only contain data that is set once to + * go for many (perhaps) independent connections. Values that are generated or + * calculated internally for the "session handle" must be defined within the + * 'struct urlstate' instead. */ + +struct SessionHandle { + curl_hash *hostcache; + struct Curl_share *share; /* Share, handles global variable mutexing */ + struct UserDefined set; /* values set by the libcurl user */ + struct DynamicStatic change; /* possibly modified userdefined data */ + + struct CookieInfo *cookies; /* the cookies, read from files and servers */ + struct Progress progress; /* for all the progress meter data */ + struct UrlState state; /* struct for fields used for state info and + other dynamic purposes */ + struct PureInfo info; /* stats, reports and info data */ +#if defined(USE_SSLEAY) && defined(HAVE_OPENSSL_ENGINE_H) + ENGINE* engine; +#endif /* USE_SSLEAY */ +}; + +#define LIBCURL_NAME "libcurl" + +#endif |