# Distributed under the OSI-approved BSD 3-Clause License. See accompanying # file Copyright.txt or https://cmake.org/licensing for details. #[=======================================================================[.rst: CMakePackageConfigHelpers ------------------------- Helpers functions for creating config files that can be included by other projects to find and use a package. Adds the :command:`configure_package_config_file()` and :command:`write_basic_package_version_file()` commands. Generating a Package Configuration File ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. command:: configure_package_config_file Create a config file for a project:: configure_package_config_file( INSTALL_DESTINATION [PATH_VARS ... ] [NO_SET_AND_CHECK_MACRO] [NO_CHECK_REQUIRED_COMPONENTS_MACRO] [INSTALL_PREFIX ] ) ``configure_package_config_file()`` should be used instead of the plain :command:`configure_file()` command when creating the ``Config.cmake`` or ``-config.cmake`` file for installing a project or library. It helps making the resulting package relocatable by avoiding hardcoded paths in the installed ``Config.cmake`` file. In a ``FooConfig.cmake`` file there may be code like this to make the install destinations know to the using project: .. code-block:: cmake set(FOO_INCLUDE_DIR "@CMAKE_INSTALL_FULL_INCLUDEDIR@" ) set(FOO_DATA_DIR "@CMAKE_INSTALL_PREFIX@/@RELATIVE_DATA_INSTALL_DIR@" ) set(FOO_ICONS_DIR "@CMAKE_INSTALL_PREFIX@/share/icons" ) #...logic to determine installedPrefix from the own location... set(FOO_CONFIG_DIR "${installedPrefix}/@CONFIG_INSTALL_DIR@" ) All 4 options shown above are not sufficient, since the first 3 hardcode the absolute directory locations, and the 4th case works only if the logic to determine the ``installedPrefix`` is correct, and if ``CONFIG_INSTALL_DIR`` contains a relative path, which in general cannot be guaranteed. This has the effect that the resulting ``FooConfig.cmake`` file would work poorly under Windows and OSX, where users are used to choose the install location of a binary package at install time, independent from how :variable:`CMAKE_INSTALL_PREFIX` was set at build/cmake time. Using ``configure_package_config_file`` helps. If used correctly, it makes the resulting ``FooConfig.cmake`` file relocatable. Usage: 1. write a ``FooConfig.cmake.in`` file as you are used to 2. insert a line containing only the string ``@PACKAGE_INIT@`` 3. instead of ``set(FOO_DIR "@SOME_INSTALL_DIR@")``, use ``set(FOO_DIR "@PACKAGE_SOME_INSTALL_DIR@")`` (this must be after the ``@PACKAGE_INIT@`` line) 4. instead of using the normal :command:`configure_file()`, use ``configure_package_config_file()`` The ```` and ```` arguments are the input and output file, the same way as in :command:`configure_file()`. The ```` given to ``INSTALL_DESTINATION`` must be the destination where the ``FooConfig.cmake`` file will be installed to. This path can either be absolute, or relative to the ``INSTALL_PREFIX`` path. The variables ```` to ```` given as ``PATH_VARS`` are the variables which contain install destinations. For each of them the macro will create a helper variable ``PACKAGE_``. These helper variables must be used in the ``FooConfig.cmake.in`` file for setting the installed location. They are calculated by ``configure_package_config_file`` so that they are always relative to the installed location of the package. This works both for relative and also for absolute locations. For absolute locations it works only if the absolute location is a subdirectory of ``INSTALL_PREFIX``. .. versionadded:: 3.1 If the ``INSTALL_PREFIX`` argument is passed, this is used as base path to calculate all the relative paths. The ```` argument must be an absolute path. If this argument is not passed, the :variable:`CMAKE_INSTALL_PREFIX` variable will be used instead. The default value is good when generating a FooConfig.cmake file to use your package from the install tree. When generating a FooConfig.cmake file to use your package from the build tree this option should be used. By default ``configure_package_config_file`` also generates two helper macros, ``set_and_check()`` and ``check_required_components()`` into the ``FooConfig.cmake`` file. ``set_and_check()`` should be used instead of the normal ``set()`` command for setting directories and file locations. Additionally to setting the variable it also checks that the referenced file or directory actually exists and fails with a ``FATAL_ERROR`` otherwise. This makes sure that the created ``FooConfig.cmake`` file does not contain wrong references. When using the ``NO_SET_AND_CHECK_MACRO``, this macro is not generated into the ``FooConfig.cmake`` file. ``check_required_components()`` should be called at the end of the ``FooConfig.cmake`` file. This macro checks whether all requested, non-optional components have been found, and if this is not the case, sets the ``Foo_FOUND`` variable to ``FALSE``, so that the package is considered to be not found. It does that by testing the ``Foo__FOUND`` variables for all requested required components. This macro should be called even if the package doesn't provide any components to make sure users are not specifying components erroneously. When using the ``NO_CHECK_REQUIRED_COMPONENTS_MACRO`` option, this macro is not generated into the ``FooConfig.cmake`` file. For an example see below the documentation for :command:`write_basic_package_version_file()`. Generating a Package Version File ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. command:: write_basic_package_version_file Create a version file for a project:: write_basic_package_version_file( [VERSION ] COMPATIBILITY [ARCH_INDEPENDENT] ) Writes a file for use as ``ConfigVersion.cmake`` file to ````. See the documentation of :command:`find_package()` for details on this. ```` is the output filename, it should be in the build tree. ```` is the version number of the project to be installed. If no ``VERSION`` is given, the :variable:`PROJECT_VERSION` variable is used. If this hasn't been set, it errors out. The ``COMPATIBILITY`` mode ``AnyNewerVersion`` means that the installed package version will be considered compatible if it is newer or exactly the same as the requested version. This mode should be used for packages which are fully backward compatible, also across major versions. If ``SameMajorVersion`` is used instead, then the behavior differs from ``AnyNewerVersion`` in that the major version number must be the same as requested, e.g. version 2.0 will not be considered compatible if 1.0 is requested. This mode should be used for packages which guarantee backward compatibility within the same major version. If ``SameMinorVersion`` is used, the behavior is the same as ``SameMajorVersion``, but both major and minor version must be the same as requested, e.g version 0.2 will not be compatible if 0.1 is requested. If ``ExactVersion`` is used, then the package is only considered compatible if the requested version matches exactly its own version number (not considering the tweak version). For example, version 1.2.3 of a package is only considered compatible to requested version 1.2.3. This mode is for packages without compatibility guarantees. If your project has more elaborated version matching rules, you will need to write your own custom ``ConfigVersion.cmake`` file instead of using this macro. .. versionadded:: 3.11 The ``SameMinorVersion`` compatibility mode. .. versionadded:: 3.14 If ``ARCH_INDEPENDENT`` is given, the installed package version will be considered compatible even if it was built for a different architecture than the requested architecture. Otherwise, an architecture check will be performed, and the package will be considered compatible only if the architecture matches exactly. For example, if the package is built for a 32-bit architecture, the package is only considered compatible if it is used on a 32-bit architecture, unless ``ARCH_INDEPENDENT`` is given, in which case the package is considered compatible on any architecture. .. note:: ``ARCH_INDEPENDENT`` is intended for header-only libraries or similar packages with no binaries. .. versionadded:: 3.19 The version file generated by ``AnyNewerVersion``, ``SameMajorVersion`` and ``SameMinorVersion`` arguments of ``COMPATIBILITY`` handle the version range if any is specified (see :command:`find_package` command for the details). ``ExactVersion`` mode is incompatible with version ranges and will display an author warning if one is specified. Internally, this macro executes :command:`configure_file()` to create the resulting version file. Depending on the ``COMPATIBILITY``, the corresponding ``BasicConfigVersion-.cmake.in`` file is used. Please note that these files are internal to CMake and you should not call :command:`configure_file()` on them yourself, but they can be used as starting point to create more sophisticted custom ``ConfigVersion.cmake`` files. Example Generating Package Files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Example using both :command:`configure_package_config_file` and ``write_basic_package_version_file()``: ``CMakeLists.txt``: .. code-block:: cmake include(GNUInstallDirs) set(INCLUDE_INSTALL_DIR ${CMAKE_INSTALL_INCLUDEDIR}/Foo CACHE PATH "Location of header files" ) set(SYSCONFIG_INSTALL_DIR ${CMAKE_INSTALL_SYSCONFDIR}/foo CACHE PATH "Location of configuration files" ) #... include(CMakePackageConfigHelpers) configure_package_config_file(FooConfig.cmake.in ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake INSTALL_DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/Foo PATH_VARS INCLUDE_INSTALL_DIR SYSCONFIG_INSTALL_DIR) write_basic_package_version_file( ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake VERSION 1.2.3 COMPATIBILITY SameMajorVersion ) install(FILES ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/Foo ) ``FooConfig.cmake.in``: :: set(FOO_VERSION x.y.z) ... @PACKAGE_INIT@ ... set_and_check(FOO_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@") set_and_check(FOO_SYSCONFIG_DIR "@PACKAGE_SYSCONFIG_INSTALL_DIR@") check_required_components(Foo) #]=======================================================================] include(WriteBasicConfigVersionFile) macro(WRITE_BASIC_PACKAGE_VERSION_FILE) write_basic_config_version_file(${ARGN}) endmacro() function(CONFIGURE_PACKAGE_CONFIG_FILE _inputFile _outputFile) set(options NO_SET_AND_CHECK_MACRO NO_CHECK_REQUIRED_COMPONENTS_MACRO) set(oneValueArgs INSTALL_DESTINATION INSTALL_PREFIX) set(multiValueArgs PATH_VARS ) cmake_parse_arguments(CCF "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN}) if(CCF_UNPARSED_ARGUMENTS) message(FATAL_ERROR "Unknown keywords given to CONFIGURE_PACKAGE_CONFIG_FILE(): \"${CCF_UNPARSED_ARGUMENTS}\"") endif() if(NOT CCF_INSTALL_DESTINATION) message(FATAL_ERROR "No INSTALL_DESTINATION given to CONFIGURE_PACKAGE_CONFIG_FILE()") endif() if(DEFINED CCF_INSTALL_PREFIX) if(IS_ABSOLUTE "${CCF_INSTALL_PREFIX}") set(installPrefix "${CCF_INSTALL_PREFIX}") else() message(FATAL_ERROR "INSTALL_PREFIX must be an absolute path") endif() elseif(IS_ABSOLUTE "${CMAKE_INSTALL_PREFIX}") set(installPrefix "${CMAKE_INSTALL_PREFIX}") else() get_filename_component(installPrefix "${CMAKE_INSTALL_PREFIX}" ABSOLUTE) endif() if(IS_ABSOLUTE "${CCF_INSTALL_DESTINATION}") set(absInstallDir "${CCF_INSTALL_DESTINATION}") else() set(absInstallDir "${installPrefix}/${CCF_INSTALL_DESTINATION}") endif() file(RELATIVE_PATH PACKAGE_RELATIVE_PATH "${absInstallDir}" "${installPrefix}" ) foreach(var ${CCF_PATH_VARS}) if(NOT DEFINED ${var}) message(FATAL_ERROR "Variable ${var} does not exist") else() if(IS_ABSOLUTE "${${var}}") string(REPLACE "${installPrefix}" "\${PACKAGE_PREFIX_DIR}" PACKAGE_${var} "${${var}}") else() set(PACKAGE_${var} "\${PACKAGE_PREFIX_DIR}/${${var}}") endif() endif() endforeach() get_filename_component(inputFileName "${_inputFile}" NAME) set(PACKAGE_INIT " ####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() ####### ####### Any changes to this file will be overwritten by the next CMake run #### ####### The input file was ${inputFileName} ######## get_filename_component(PACKAGE_PREFIX_DIR \"\${CMAKE_CURRENT_LIST_DIR}/${PACKAGE_RELATIVE_PATH}\" ABSOLUTE) ") if("${absInstallDir}" MATCHES "^(/usr)?/lib(64)?/.+") # Handle "/usr move" symlinks created by some Linux distros. string(APPEND PACKAGE_INIT " # Use original install prefix when loaded through a \"/usr move\" # cross-prefix symbolic link such as /lib -> /usr/lib. get_filename_component(_realCurr \"\${CMAKE_CURRENT_LIST_DIR}\" REALPATH) get_filename_component(_realOrig \"${absInstallDir}\" REALPATH) if(_realCurr STREQUAL _realOrig) set(PACKAGE_PREFIX_DIR \"${installPrefix}\") endif() unset(_realOrig) unset(_realCurr) ") endif() if(NOT CCF_NO_SET_AND_CHECK_MACRO) string(APPEND PACKAGE_INIT " macro(set_and_check _var _file) set(\${_var} \"\${_file}\") if(NOT EXISTS \"\${_file}\") message(FATAL_ERROR \"File or directory \${_file} referenced by variable \${_var} does not exist !\") endif() endmacro() ") endif() if(NOT CCF_NO_CHECK_REQUIRED_COMPONENTS_MACRO) string(APPEND PACKAGE_INIT " macro(check_required_components _NAME) foreach(comp \${\${_NAME}_FIND_COMPONENTS}) if(NOT \${_NAME}_\${comp}_FOUND) if(\${_NAME}_FIND_REQUIRED_\${comp}) set(\${_NAME}_FOUND FALSE) endif() endif() endforeach() endmacro() ") endif() string(APPEND PACKAGE_INIT " ####################################################################################") configure_file("${_inputFile}" "${_outputFile}" @ONLY) endfunction()