volmar: Remove als tcs4300

Remove als tcs4300 function

BUG=b:211891086
BRANCH=none
TEST=make BOARD=volmar
Signed-off-by: Yu-An Chen <yu-an.chen@quanta.corp-partner.google.com>
Change-Id: I9c3a9426acc1d68cf6ab1d6187783b1e0f4643a1
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3382606
Reviewed-by: caveh jalali <caveh@chromium.org>

5 files changed, 3 insertions, 116 deletions

diff --git a/board/volmar/board.c b/board/volmar/board.c
index 4ca53ffa48..8c3142b39c 100644
--- a/board/volmar/board.c
+++ b/board/volmar/board.c
@@ -15,7 +15,6 @@
 #include "hooks.h"
 #include "driver/accel_lis2dw12.h"
 #include "driver/accelgyro_lsm6dso.h"
-#include "driver/als_tcs3400.h"
 #include "fw_config.h"
 #include "hooks.h"
 #include "lid_switch.h"
diff --git a/board/volmar/board.h b/board/volmar/board.h
index a535838edc..b38189440e 100644
--- a/board/volmar/board.h
+++ b/board/volmar/board.h
@@ -43,13 +43,6 @@
 #define CONFIG_ACCEL_LSM6DSO_INT_EVENT \
 	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
 
-/* TCS3400 ALS */
-#define CONFIG_ALS
-#define ALS_COUNT 1
-#define CONFIG_ALS_TCS3400
-#define CONFIG_ALS_TCS3400_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(CLEAR_ALS)
-
 /* Enable sensor fifo, must also define the _SIZE and _THRES */
 #define CONFIG_ACCEL_FIFO
 /* FIFO size is in power of 2. */
@@ -58,8 +51,7 @@
 #define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3)
 
 /* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK \
-	(BIT(LID_ACCEL) | BIT(CLEAR_ALS))
+#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
 
 /* Lid accel */
 #define CONFIG_LID_ANGLE
@@ -242,8 +234,6 @@ enum sensor_id {
 	LID_ACCEL = 0,
 	BASE_ACCEL,
 	BASE_GYRO,
-	CLEAR_ALS,
-	RGB_ALS,
 	SENSOR_COUNT
 };
 
diff --git a/board/volmar/build.mk b/board/volmar/build.mk
index cd6a38a852..82ffaa9fe2 100644
--- a/board/volmar/build.mk
+++ b/board/volmar/build.mk
@@ -3,7 +3,7 @@
 # Use of this source code is governed by a BSD-style license that can be
 # found in the LICENSE file.
 #
-# Brya board specific files build
+# Volmar board specific files build
 #
 
 CHIP:=npcx
diff --git a/board/volmar/gpio.inc b/board/volmar/gpio.inc
index 5ab5bd01f2..c929c10c83 100644
--- a/board/volmar/gpio.inc
+++ b/board/volmar/gpio.inc
@@ -10,7 +10,6 @@
 /* INTERRUPT GPIOs: */
 GPIO_INT(ACOK_OD,                        PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt)
 GPIO_INT(EC_ACCEL_INT_R_L,               PIN(8, 1), GPIO_SEL_1P8V | GPIO_INT_FALLING, lis2dw12_interrupt)
-GPIO_INT(EC_ALS_RGB_INT_R_L,             PIN(D, 4), GPIO_INT_FALLING, tcs3400_interrupt)
 GPIO_INT(EC_IMU_INT_R_L,                 PIN(5, 6), GPIO_SEL_1P8V | GPIO_INT_FALLING, lsm6dso_interrupt)
 GPIO_INT(EC_PROCHOT_IN_L,                PIN(F, 0), GPIO_INT_BOTH, throttle_ap_prochot_input_interrupt)
 GPIO_INT(EC_VOLDN_BTN_ODL,               PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)
@@ -126,7 +125,7 @@ UNUSED(PIN(3, 2))       /* GPO32/TRIS_L */
 UNUSED(PIN(3, 5))       /* GPO35/CR_SOUT4/TEST_L */
 UNUSED(PIN(6, 6))       /* GPIO66 */
 UNUSED(PIN(5, 7))       /* GPIO57/SER_IRQ/ESPI_ALERT_L */
-
+UNUSED(PIN(D, 4))       /* GPIOD4 */
 /* Pre-configured PSL balls:  J8  K6 */
 
 /*
diff --git a/board/volmar/sensors.c b/board/volmar/sensors.c
index b355c98123..3b76ebe786 100644
--- a/board/volmar/sensors.c
+++ b/board/volmar/sensors.c
@@ -8,7 +8,6 @@
 #include "adc.h"
 #include "driver/accel_lis2dw12.h"
 #include "driver/accelgyro_lsm6dso.h"
-#include "driver/als_tcs3400_public.h"
 #include "hooks.h"
 #include "motion_sense.h"
 #include "temp_sensor.h"
@@ -67,60 +66,6 @@ static const mat33_fp_t base_standard_ref = {
 	{ 0, 0, FLOAT_TO_FP(-1)}
 };
 
-/* TCS3400 private data */
-static struct als_drv_data_t g_tcs3400_data = {
-	.als_cal.scale = 1,
-	.als_cal.uscale = 0,
-	.als_cal.offset = 0,
-	.als_cal.channel_scale = {
-		.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kc from VPD */
-		.cover_scale = ALS_CHANNEL_SCALE(1.0),     /* CT */
-	},
-};
-
-/*
- * TODO: b/184702900 need to calibrate ALS/RGB sensor. At default settings,
- * shining phone flashlight on sensor pegs all readings at 0xFFFF.
- */
-static struct tcs3400_rgb_drv_data_t g_tcs3400_rgb_data = {
-	.calibration.rgb_cal[X] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(1.0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kr */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.rgb_cal[Y] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(1.0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kg */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		},
-	},
-	.calibration.rgb_cal[Z] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(1.0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kb */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.irt = INT_TO_FP(1),
-	.saturation.again = TCS_DEFAULT_AGAIN,
-	.saturation.atime = TCS_DEFAULT_ATIME,
-};
-
 struct motion_sensor_t motion_sensors[] = {
 	[LID_ACCEL] = {
 		.name = "Lid Accel",
@@ -194,59 +139,13 @@ struct motion_sensor_t motion_sensors[] = {
 		.min_frequency = LSM6DSO_ODR_MIN_VAL,
 		.max_frequency = LSM6DSO_ODR_MAX_VAL,
 	},
-
-	[CLEAR_ALS] = {
-		.name = "Clear Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT,
-		.location = MOTIONSENSE_LOC_CAMERA,
-		.drv = &tcs3400_drv,
-		.drv_data = &g_tcs3400_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = TCS3400_I2C_ADDR_FLAGS,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-		.min_frequency = TCS3400_LIGHT_MIN_FREQ,
-		.max_frequency = TCS3400_LIGHT_MAX_FREQ,
-		.config = {
-			/* Run ALS sensor in S0 */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 1000,
-			},
-		},
-	},
-
-	[RGB_ALS] = {
-		/*
-		 * RGB channels read by CLEAR_ALS and so the i2c port and
-		 * address do not need to be defined for RGB_ALS.
-		 */
-		.name = "RGB Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT_RGB,
-		.location = MOTIONSENSE_LOC_CAMERA,
-		.drv = &tcs3400_rgb_drv,
-		.drv_data = &g_tcs3400_rgb_data,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-	},
 };
 const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
 
-/* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */
-const struct motion_sensor_t *motion_als_sensors[] = {
-	&motion_sensors[CLEAR_ALS],
-};
-BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);
-
 static void baseboard_sensors_init(void)
 {
 	/* Enable gpio interrupt for lid accel sensor */
 	gpio_enable_interrupt(GPIO_EC_ACCEL_INT_R_L);
-	/* Enable interrupt for the TCS3400 color light sensor */
-	gpio_enable_interrupt(GPIO_EC_ALS_RGB_INT_R_L);
 	/* Enable gpio interrupt for base accelgyro sensor */
 	gpio_enable_interrupt(GPIO_EC_IMU_INT_R_L);
 }