diff options
author | Nicolas Boichat <drinkcat@chromium.org> | 2017-12-20 10:03:18 +0800 |
---|---|---|
committer | chrome-bot <chrome-bot@chromium.org> | 2018-01-05 05:43:19 -0800 |
commit | ca7bf51513a2ae5cdaf755f2a89e4f14b182d86c (patch) | |
tree | fd6d7656166639f0c19ea9f6bd3bab3073687f91 | |
parent | 9de2d245cf0168131ddc8fda284e8ee169012fa3 (diff) | |
download | chrome-ec-ca7bf51513a2ae5cdaf755f2a89e4f14b182d86c.tar.gz |
poppy/soraka: Remove charger profile override functions
The battery gas gauge is configured properly, and we do not need
these hacks.
BRANCH=none
BUG=b:70816727
TEST=On soraka, check that we can recover from dead battery
TEST=On soraka, check that we can recover from battery cut-off
(both HW and SW)
TEST=Check that battery stops requesting power when over or under
set temperature (done by ODM/battery vendor, see bug)
Change-Id: I0b9d605632d86a3c39d07676d62374602ba068b4
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/835728
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
-rw-r--r-- | board/poppy/battery.c | 42 | ||||
-rw-r--r-- | board/poppy/board.h | 1 |
2 files changed, 0 insertions, 43 deletions
diff --git a/board/poppy/battery.c b/board/poppy/battery.c index f35aa25348..30c89c24df 100644 --- a/board/poppy/battery.c +++ b/board/poppy/battery.c @@ -76,48 +76,6 @@ int board_cut_off_battery(void) return sb_write(SB_SHIP_MODE_REG, SB_SHUTDOWN_DATA); } -int charger_profile_override(struct charge_state_data *curr) -{ - const struct battery_info *batt_info; - int bat_temp_c; - - batt_info = battery_get_info(); - - if ((curr->batt.flags & BATT_FLAG_BAD_ANY) == BATT_FLAG_BAD_ANY) { - curr->requested_current = batt_info->precharge_current; - curr->requested_voltage = batt_info->voltage_max; - return 1000; - } - - /* battery temp in 0.1 deg C */ - bat_temp_c = curr->batt.temperature - 2731; - - /* Don't charge if outside of allowable temperature range */ - if (bat_temp_c >= batt_info->charging_max_c * 10 || - bat_temp_c < batt_info->charging_min_c * 10) { - curr->requested_current = 0; - curr->requested_voltage = 0; - curr->batt.flags &= ~BATT_FLAG_WANT_CHARGE; - curr->state = ST_IDLE; - } - return 0; -} - -/* Customs options controllable by host command. */ -#define PARAM_FASTCHARGE (CS_PARAM_CUSTOM_PROFILE_MIN + 0) - -enum ec_status charger_profile_override_get_param(uint32_t param, - uint32_t *value) -{ - return EC_RES_INVALID_PARAM; -} - -enum ec_status charger_profile_override_set_param(uint32_t param, - uint32_t value) -{ - return EC_RES_INVALID_PARAM; -} - enum battery_present battery_hw_present(void) { /* The GPIO is low when the battery is physically present */ diff --git a/board/poppy/board.h b/board/poppy/board.h index 882b70391c..083f764c17 100644 --- a/board/poppy/board.h +++ b/board/poppy/board.h @@ -84,7 +84,6 @@ #define CONFIG_CHARGER_INPUT_CURRENT 512 #define CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON 2 #define CONFIG_CHARGER_NARROW_VDC -#define CONFIG_CHARGER_PROFILE_OVERRIDE #define CONFIG_CHARGER_PSYS #define CONFIG_CHARGER_SENSE_RESISTOR 10 #define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 |