delan: Remove board

BUG=b:121354442
BRANCH=grunt
TEST=none

Change-Id: Ia7812efa988c4dab5801be3e07ad495f3aa6bfab
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1539096
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>

8 files changed, 0 insertions, 668 deletions

diff --git a/board/delan/analyzestack.yaml b/board/delan/analyzestack.yaml
deleted file mode 120000
index 9873122a08..0000000000
--- a/board/delan/analyzestack.yaml
+++ /dev/null
@@ -1 +0,0 @@
-../../baseboard/grunt/analyzestack.yaml
\ No newline at end of file
diff --git a/board/delan/battery.c b/board/delan/battery.c
deleted file mode 100644
index f18aa4bda1..0000000000
--- a/board/delan/battery.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery_fuel_gauge.h"
-#include "common.h"
-#include "util.h"
-
-/*
- * Battery info for all Delan battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-const struct board_batt_params board_battery_info[] = {
-	/* BYD Battery Information */
-	[BATTERY_BYD] = {
-		.fuel_gauge = {
-			.manuf_name = "BYD",
-			.ship_mode = {
-				.reg_addr = 0x00,
-				.reg_data = { 0x0010, 0x0010 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x2000,
-				.disconnect_val = 0x2000,
-			},
-			.imbalance_mv = battery_bq4050_imbalance_mv,
-		},
-		.batt_info = {
-			.voltage_max		= 13200, /* mV */
-			.voltage_normal		= 11400, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= 0,
-			.discharging_max_c	= 70,
-		},
-	},
-
-	/* LGC Battery Information */
-	[BATTERY_LGC] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC-LGC3.553",
-			.ship_mode = {
-				.reg_addr = 0x00,
-				.reg_data = { 0x0010, 0x0010 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x2000,
-				.disconnect_val = 0x2000,
-			},
-			.imbalance_mv = battery_bq4050_imbalance_mv,
-		},
-		.batt_info = {
-			.voltage_max		= 13200, /* mV */
-			.voltage_normal		= 11400, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= -3,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= -3,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -20,
-			.discharging_max_c	= 70,
-		},
-	},
-
-	/* SIMPLO Battery Information */
-	[BATTERY_SIMPLO] = {
-		.fuel_gauge = {
-			.manuf_name = "SMP-SDI3.72",
-			.ship_mode = {
-				.reg_addr = 0x0,
-				.reg_data = { 0x0010, 0x0010 },
-			},
-			.fet = {
-				.reg_addr = 0x43,
-				.reg_mask = 0x0001,
-				.disconnect_val = 0x000,
-			},
-			.imbalance_mv = battery_default_imbalance_mv,
-		},
-		.batt_info = {
-			.voltage_max		= 13200, /* mV */
-			.voltage_normal		= 11400, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 50,
-			.charging_min_c		= -3,
-			.charging_max_c		= 60,
-			.discharging_min_c	= -3,
-			.discharging_max_c	= 70,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_LGC;
diff --git a/board/delan/board.c b/board/delan/board.c
deleted file mode 100644
index 4304ce25e4..0000000000
--- a/board/delan/board.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Delan board-specific configuration */
-
-#include "adc.h"
-#include "adc_chip.h"
-#include "button.h"
-#include "charge_manager.h"
-#include "charge_state.h"
-#include "charge_state_v2.h"
-#include "common.h"
-#include "compile_time_macros.h"
-#include "console.h"
-#include "driver/led/lm3630a.h"
-#include "driver/ppc/sn5s330.h"
-#include "driver/tcpm/anx74xx.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "driver/temp_sensor/sb_tsi.h"
-#include "ec_commands.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "registers.h"
-#include "switch.h"
-#include "system.h"
-#include "task.h"
-#include "tcpci.h"
-#include "temp_sensor.h"
-#include "thermistor.h"
-#include "usb_mux.h"
-#include "usb_pd_tcpm.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-#ifdef CONFIG_USB_PD_TCPC_LOW_POWER
-static void anx74xx_cable_det_handler(void)
-{
-	int cable_det = gpio_get_level(GPIO_USB_C0_CABLE_DET);
-	int reset_n = gpio_get_level(GPIO_USB_C0_PD_RST_L);
-
-	/*
-	 * A cable_det low->high transition was detected. If following the
-	 * debounce time, cable_det is high, and reset_n is low, then ANX3429 is
-	 * currently in standby mode and needs to be woken up. Set the
-	 * TCPC_RESET event which will bring the ANX3429 out of standby
-	 * mode. Setting this event is gated on reset_n being low because the
-	 * ANX3429 will always set cable_det when transitioning to normal mode
-	 * and if in normal mode, then there is no need to trigger a tcpc reset.
-	 */
-	if (cable_det && !reset_n)
-		task_set_event(TASK_ID_PD_C0, PD_EVENT_TCPC_RESET, 0);
-}
-DECLARE_DEFERRED(anx74xx_cable_det_handler);
-
-void anx74xx_cable_det_interrupt(enum gpio_signal signal)
-{
-	/* debounce for 2 msec */
-	hook_call_deferred(&anx74xx_cable_det_handler_data, (2 * MSEC));
-}
-#endif
-
-static void ppc_interrupt(enum gpio_signal signal)
-{
-	int port = (signal == GPIO_USB_C0_SWCTL_INT_ODL) ? 0 : 1;
-
-	sn5s330_interrupt(port);
-}
-
-#include "gpio_list.h"
-
-/* I2C port map. */
-const struct i2c_port_t i2c_ports[] = {
-	{"power",   I2C_PORT_POWER,   100, GPIO_I2C0_SCL, GPIO_I2C0_SDA},
-	{"tcpc0",   I2C_PORT_TCPC0,   400, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
-	{"tcpc1",   I2C_PORT_TCPC1,   400, GPIO_I2C2_SCL, GPIO_I2C2_SDA},
-	{"thermal", I2C_PORT_THERMAL, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA},
-	{"kblight", I2C_PORT_KBLIGHT, 100, GPIO_I2C5_SCL, GPIO_I2C5_SDA},
-	{"sensor",  I2C_PORT_SENSOR,  400, GPIO_I2C7_SCL, GPIO_I2C7_SDA},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT] = {
-		.channel = 5,
-		.flags = PWM_CONFIG_DSLEEP,
-		.freq = 100,
-	},
-	[PWM_CH_LED1_AMBER] = {
-		.channel = 2,
-		.flags = (PWM_CONFIG_OPEN_DRAIN | PWM_CONFIG_ACTIVE_LOW
-			  | PWM_CONFIG_DSLEEP),
-		.freq = 100,
-	},
-	[PWM_CH_LED2_WHITE] =   {
-		.channel = 0,
-		.flags = (PWM_CONFIG_OPEN_DRAIN | PWM_CONFIG_ACTIVE_LOW
-			  | PWM_CONFIG_DSLEEP),
-		.freq = 100,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-void board_overcurrent_event(int port, int is_overcurrented)
-{
-	enum gpio_signal signal = (port == 0) ? GPIO_USB_C0_OC_L
-					      : GPIO_USB_C1_OC_L;
-	/* Note that the levels are inverted because the pin is active low. */
-	int lvl = is_overcurrented ? 0 : 1;
-
-	gpio_set_level(signal, lvl);
-
-	CPRINTS("p%d: overcurrent!", port);
-}
-
-void board_tcpc_init(void)
-{
-	int port;
-
-	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image())
-		board_reset_pd_mcu();
-
-	/* Enable PPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_SWCTL_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_SWCTL_INT_ODL);
-
-	/* Enable TCPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_PD_INT_ODL);
-
-#ifdef CONFIG_USB_PD_TCPC_LOW_POWER
-	/* Enable CABLE_DET interrupt for ANX3429 wake from standby */
-	gpio_enable_interrupt(GPIO_USB_C0_CABLE_DET);
-#endif
-	/*
-	 * Initialize HPD to low; after sysjump SOC needs to see
-	 * HPD pulse to enable video path
-	 */
-	for (port = 0; port < CONFIG_USB_PD_PORT_COUNT; port++) {
-		const struct usb_mux *mux = &usb_muxes[port];
-
-		mux->hpd_update(port, 0, 0);
-	}
-}
-DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C + 1);
-
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-
-	if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL)) {
-		if (gpio_get_level(GPIO_USB_C0_PD_RST_L))
-			status |= PD_STATUS_TCPC_ALERT_0;
-	}
-
-	if (!gpio_get_level(GPIO_USB_C1_PD_INT_ODL)) {
-		if (gpio_get_level(GPIO_USB_C1_PD_RST_L))
-			status |= PD_STATUS_TCPC_ALERT_1;
-	}
-
-	return status;
-}
-
-/**
- * Power on (or off) a single TCPC.
- * minimum on/off delays are included.
- *
- * @param port	Port number of TCPC.
- * @param mode	0: power off, 1: power on.
- */
-void board_set_tcpc_power_mode(int port, int mode)
-{
-	if (port != USB_PD_PORT_ANX74XX)
-		return;
-
-	switch (mode) {
-	case ANX74XX_NORMAL_MODE:
-		gpio_set_level(GPIO_EN_USB_C0_TCPC_PWR, 1);
-		msleep(ANX74XX_PWR_H_RST_H_DELAY_MS);
-		gpio_set_level(GPIO_USB_C0_PD_RST_L, 1);
-		break;
-	case ANX74XX_STANDBY_MODE:
-		gpio_set_level(GPIO_USB_C0_PD_RST_L, 0);
-		msleep(ANX74XX_RST_L_PWR_L_DELAY_MS);
-		gpio_set_level(GPIO_EN_USB_C0_TCPC_PWR, 0);
-		msleep(ANX74XX_PWR_L_PWR_H_DELAY_MS);
-		break;
-	default:
-		break;
-	}
-}
-
-void board_reset_pd_mcu(void)
-{
-	/* Assert reset to TCPC1 (ps8751) */
-	gpio_set_level(GPIO_USB_C1_PD_RST_L, 0);
-
-	/* Assert reset to TCPC0 (anx3429) */
-	gpio_set_level(GPIO_USB_C0_PD_RST_L, 0);
-
-	/* TCPC1 (ps8751) requires 1ms reset down assertion */
-	msleep(MAX(1, ANX74XX_RST_L_PWR_L_DELAY_MS));
-
-	/* Deassert reset to TCPC1 */
-	gpio_set_level(GPIO_USB_C1_PD_RST_L, 1);
-	/* Disable TCPC0 power */
-	gpio_set_level(GPIO_EN_USB_C0_TCPC_PWR, 0);
-
-	/*
-	 * anx3429 requires 10ms reset/power down assertion
-	 */
-	msleep(ANX74XX_PWR_L_PWR_H_DELAY_MS);
-	board_set_tcpc_power_mode(USB_PD_PORT_ANX74XX, 1);
-}
-
-static void board_kblight_init(void)
-{
-	/*
-	 * Enable keyboard backlight. This needs to be done here because
-	 * the chip doesn't have power until PP3300_S0 comes up.
-	 */
-	gpio_set_level(GPIO_KB_BL_EN, 1);
-	lm3630a_poweron();
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_kblight_init, HOOK_PRIO_DEFAULT);
diff --git a/board/delan/board.h b/board/delan/board.h
deleted file mode 100644
index 8ed14a8d91..0000000000
--- a/board/delan/board.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Delan board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-#include "baseboard.h"
-
-/*
- * By default, enable all console messages excepted HC, ACPI and event:
- * The sensor stack is generating a lot of activity.
- */
-#define CC_DEFAULT     (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC)))
-#undef CONFIG_HOSTCMD_DEBUG_MODE
-#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF
-
-#define CONFIG_MKBP_USE_HOST_EVENT
-
-/* Power and battery LEDs */
-#define CONFIG_LED_COMMON
-#define CONFIG_CMD_LEDTEST
-
-#undef CONFIG_LED_PWM_NEAR_FULL_COLOR
-#undef CONFIG_LED_PWM_CHARGE_ERROR_COLOR
-#undef CONFIG_LED_PWM_SOC_ON_COLOR
-#undef CONFIG_LED_PWM_SOC_SUSPEND_COLOR
-
-#define CONFIG_LED_PWM_NEAR_FULL_COLOR EC_LED_COLOR_WHITE
-#define CONFIG_LED_PWM_CHARGE_ERROR_COLOR EC_LED_COLOR_AMBER
-#define CONFIG_LED_PWM_SOC_ON_COLOR EC_LED_COLOR_WHITE
-#define CONFIG_LED_PWM_SOC_SUSPEND_COLOR EC_LED_COLOR_WHITE
-
-#define CONFIG_LED_PWM_COUNT 1
-
-#define I2C_PORT_KBLIGHT NPCX_I2C_PORT5_0
-
-/* KB backlight driver */
-#define CONFIG_LED_DRIVER_LM3630A
-
-#define CONFIG_BATTERY_BQ4050
-#define CONFIG_BATTERY_MEASURE_IMBALANCE
-
-/* CBI EEPROM for board version and SKU ID */
-#define CONFIG_CROS_BOARD_INFO
-#define CONFIG_BOARD_VERSION_CBI
-#define I2C_PORT_EEPROM		NPCX_I2C_PORT5_0
-#define I2C_ADDR_EEPROM		0xA0
-#define CONFIG_CRC8
-
-#ifndef __ASSEMBLER__
-
-enum pwm_channel {
-	PWM_CH_KBLIGHT = 0,
-	PWM_CH_LED1_AMBER,
-	PWM_CH_LED2_WHITE,
-	PWM_CH_COUNT
-};
-
-enum battery_type {
-	BATTERY_BYD,
-	BATTERY_LGC,
-	BATTERY_SIMPLO,
-	BATTERY_TYPE_COUNT,
-};
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/delan/build.mk b/board/delan/build.mk
deleted file mode 100644
index c808e65aed..0000000000
--- a/board/delan/build.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-# -*- makefile -*-
-# Copyright 2015 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-CHIP:=npcx
-CHIP_FAMILY:=npcx7
-CHIP_VARIANT:=npcx7m6f
-BASEBOARD:=grunt
-
-board-y=board.o led.o
-board-$(CONFIG_BATTERY_SMART)+=battery.o
diff --git a/board/delan/ec.tasklist b/board/delan/ec.tasklist
deleted file mode 100644
index 67453cd670..0000000000
--- a/board/delan/ec.tasklist
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Copyright 2017 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * List of enabled tasks in the priority order
- *
- * The first one has the lowest priority.
- *
- * For each task, use the macro TASK_ALWAYS(n, r, d, s) for base tasks and
- * TASK_NOTEST(n, r, d, s) for tasks that can be excluded in test binaries,
- * where :
- * 'n' in the name of the task
- * 'r' in the main routine of the task
- * 'd' in an opaque parameter passed to the routine at startup
- * 's' is the stack size in bytes; must be a multiple of 8
- *
- * For USB PD tasks, IDs must be in consecutive order and correspond to
- * the port which they are for. See TASK_ID_TO_PD_PORT() macro.
- */
-
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 1, TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
-	TASK_NOTEST(PDCMD, pd_command_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(POWERBTN, power_button_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, TASK_STACK_SIZE)
diff --git a/board/delan/gpio.inc b/board/delan/gpio.inc
deleted file mode 100644
index 05dc06f15b..0000000000
--- a/board/delan/gpio.inc
+++ /dev/null
@@ -1,113 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2017 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-GPIO_INT(USB_C0_PD_INT_ODL,	PIN(A, 0), GPIO_INT_FALLING,			tcpc_alert_event)
-GPIO_INT(USB_C1_PD_INT_ODL,	PIN(F, 5), GPIO_INT_FALLING,			tcpc_alert_event)
-GPIO_INT(USB_C0_SWCTL_INT_ODL,	PIN(0, 3), GPIO_INT_FALLING,			ppc_interrupt)
-GPIO_INT(USB_C1_SWCTL_INT_ODL,	PIN(D, 4), GPIO_INT_FALLING,			ppc_interrupt)
-GPIO_INT(PCH_SLP_S3_L,		PIN(A, 6), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(PCH_SLP_S5_L,		PIN(A, 3), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(S0_PGOOD,		PIN(F, 4), GPIO_INT_BOTH,			power_signal_interrupt)
-GPIO_INT(S5_PGOOD,		PIN(6, 3), GPIO_INT_BOTH | GPIO_PULL_UP,	power_signal_interrupt)
-GPIO_INT(POWER_BUTTON_L,	PIN(0, 1), GPIO_INT_BOTH,			power_button_interrupt)
-GPIO_INT(LID_OPEN,		PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH | GPIO_PULL_UP,	lid_interrupt)
-GPIO_INT(AC_PRESENT,		PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH,	extpower_interrupt)
-GPIO_INT(WP_L,			PIN(A, 1), GPIO_INT_BOTH,			switch_interrupt)
-GPIO_INT(VOLUME_DOWN_L,		PIN(7, 0), GPIO_INT_BOTH | GPIO_PULL_UP,	button_interrupt)
-GPIO_INT(VOLUME_UP_L,		PIN(7, 5), GPIO_INT_BOTH | GPIO_PULL_UP,	button_interrupt)
-GPIO_INT(USB_C0_CABLE_DET,	PIN(3, 7), GPIO_INT_RISING,			anx74xx_cable_det_interrupt)
-
-GPIO(EN_PWR_A,			PIN(E, 2), GPIO_OUT_LOW)			/* Enable Power */
-GPIO(EN_PP1800_SENSOR,		PIN(6, 7), GPIO_OUT_LOW)			/* Enable Power */
-GPIO(ENABLE_BACKLIGHT_L,	PIN(D, 3), GPIO_OUT_HIGH)			/* Enable Backlight */
-GPIO(PCH_RSMRST_L,		PIN(C, 2), GPIO_OUT_LOW)			/* RSMRST# to SOC */
-GPIO(PCH_PWRBTN_L,		PIN(C, 1), GPIO_OUT_HIGH)			/* Power Button to SOC */
-GPIO(PCH_WAKE_L,		PIN(7, 4), GPIO_OUT_HIGH)			/* Wake SOC */
-GPIO(SYS_RESET_L,		PIN(E, 4), GPIO_ODR_HIGH)			/* Cold Reset to SOC */
-GPIO(CCD_MODE_ODL,		PIN(E, 3), GPIO_INPUT)				/* Case Closed Debug Mode */
-GPIO(ENTERING_RW,		PIN(E, 1), GPIO_OUT_LOW)			/* EC Entering RW */
-GPIO(EC_BATT_PRES_L,		PIN(E, 5), GPIO_INPUT | GPIO_PULL_UP)		/* Battery Present */
-GPIO(PCH_SYS_PWROK,		PIN(D, 6), GPIO_OUT_LOW)			/* Power OK to SOC */
-GPIO(CPU_PROCHOT,		PIN(3, 4), GPIO_INPUT | GPIO_SEL_1P8V)		/* PROCHOT to SOC */
-GPIO(APU_ALERT_L,		PIN(A, 2), GPIO_INPUT)				/* Alert to SOC */
-GPIO(3AXIS_INT_L,		PIN(5, 0), GPIO_INPUT | GPIO_SEL_1P8V)		/* 3 Axis Accel */
-GPIO(KB_BL_EN,			PIN(F, 2), GPIO_OUT_LOW)			/* Enable KB Backlight */
-
-/* I2C pins - these will be reconfigured for alternate function below */
-GPIO(I2C0_SCL,			PIN(B, 5), GPIO_INPUT)				/* EC_I2C_POWER_SCL */
-GPIO(I2C0_SDA,			PIN(B, 4), GPIO_INPUT)				/* EC_I2C_POWER_SDA */
-GPIO(I2C1_SCL,			PIN(9, 0), GPIO_INPUT)				/* EC_I2C_USB_C0_PD_SCL */
-GPIO(I2C1_SDA,			PIN(8, 7), GPIO_INPUT)				/* EC_I2C_USB_C0_PD_SDA */
-GPIO(I2C2_SCL,			PIN(9, 2), GPIO_INPUT)				/* EC_I2C_USB_C1_PD_SCL */
-GPIO(I2C2_SDA,			PIN(9, 1), GPIO_INPUT)				/* EC_I2C_USB_C1_PD_SDA */
-GPIO(I2C3_SCL,			PIN(D, 1), GPIO_INPUT | GPIO_SEL_1P8V)		/* APU_SIC */
-GPIO(I2C3_SDA,			PIN(D, 0), GPIO_INPUT | GPIO_SEL_1P8V)		/* APU_SID */
-GPIO(I2C5_SCL,			PIN(3, 3), GPIO_INPUT)				/* EC_I2C_EEPROM_SCL and
-										   EC_I2C_KB_BL_SCL */
-GPIO(I2C5_SDA,			PIN(3, 6), GPIO_INPUT)				/* EC_I2C_EEPROM_SDA and
-										   EC_I2C_KB_BL_SDA */
-GPIO(I2C7_SCL,			PIN(B, 3), GPIO_INPUT | GPIO_SEL_1P8V)		/* EC_I2C_SENSOR_SCL */
-GPIO(I2C7_SDA,			PIN(B, 2), GPIO_INPUT | GPIO_SEL_1P8V)		/* EC_I2C_SENSOR_SDA */
-
-/*
- * The NPCX LPC driver configures and controls SCI and SMI,
- * so PCH_SCI_ODL [PIN(7, 6)] and PCH_SMI_ODL [PIN(C, 6)] are
- * not defined here as GPIOs.
- */
-GPIO(PCH_SLP_S0_L,		PIN(A, 4), GPIO_INPUT)
-
-GPIO(EN_USB_A0_5V,		PIN(6, 1), GPIO_OUT_LOW)			/* Enable A0 5V Charging */
-GPIO(EN_USB_A1_5V,		PIN(C, 0), GPIO_OUT_LOW)			/* Enable A1 5V Charging */
-GPIO(EN_USB_C0_TCPC_PWR,	PIN(6, 0), GPIO_OUT_LOW)			/* Enable C0 TCPC Power */
-GPIO(USB_C0_OC_L,		PIN(7, 3), GPIO_OUT_HIGH)			/* C0 Over Current */
-GPIO(USB_C1_OC_L,		PIN(7, 2), GPIO_OUT_HIGH)			/* C1 Over Current */
-GPIO(USB_C0_PD_RST_L,		PIN(3, 2), GPIO_OUT_HIGH)			/* C0 PD Reset */
-GPIO(USB_C1_PD_RST_L,		PIN(D, 5), GPIO_OUT_HIGH)			/* C1 PD Reset */
-GPIO(USB_C0_BC12_VBUS_ON_L,	PIN(4, 0), GPIO_ODR_HIGH)			/* C0 BC1.2 Power */
-GPIO(USB_C1_BC12_VBUS_ON_L,	PIN(B, 1), GPIO_ODR_HIGH| GPIO_PULL_UP)		/* C1 BC1.2 Power */
-GPIO(USB_C0_BC12_CHG_DET,	PIN(6, 2), GPIO_INPUT)				/* C0 BC1.2 Detect */
-GPIO(USB_C1_BC12_CHG_DET,	PIN(8, 3), GPIO_INPUT | GPIO_PULL_DOWN)		/* C1 BC1.2 Detect */
-GPIO(USB_C0_DP_HPD,		PIN(9, 5), GPIO_OUT_LOW)			/* C0 DP Hotplug Detect */
-GPIO(USB_C1_DP_HPD,		PIN(9, 6), GPIO_OUT_LOW)			/* C1 DP Hotplug Detect */
-
-/* Board ID */
-GPIO(BOARD_VERSION1,		PIN(C, 7), GPIO_INPUT)
-GPIO(BOARD_VERSION2,		PIN(9, 3), GPIO_INPUT)
-GPIO(BOARD_VERSION3,		PIN(8, 0), GPIO_INPUT)
-GPIO(SKU_ID1,			PIN(F, 0), GPIO_INPUT)
-GPIO(SKU_ID2,			PIN(4, 1), GPIO_INPUT)
-
-/* Alternate functions GPIO definitions */
-/* Cr50 requires no pull-ups on UART pins. */
-ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0)					/* UART from EC to Servo */
-ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, 0)					/* I2C0 */
-ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0)					/* I2C1 SCL / I2C2 */
-ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0)					/* I2C1 SDA */
-ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0)					/* I2C3 */
-ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0)					/* I2C5 */
-ALTERNATE(PIN_MASK(B, 0x0C), 0, MODULE_I2C, 0)					/* I2C7 */
-ALTERNATE(PIN_MASK(4, 0x30), 0, MODULE_ADC, 0)					/* ADC0-1 */
-ALTERNATE(PIN_MASK(4, 0x02), 0, MODULE_ADC, 0)					/* ADC4 */
-ALTERNATE(PIN_MASK(F, 0x02), 0, MODULE_ADC, 0)					/* ADC8 */
-ALTERNATE(PIN_MASK(F, 0x01), 0, MODULE_ADC, 0)					/* ADC9 */
-ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0)					/* KB Backlight */
-ALTERNATE(PIN_MASK(C, 0x18), 0, MODULE_PWM, 0) 					/* LED 1 & 2 */
-
-/* Keyboard Pins */
-ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)		/* KSI_00-01 */
-ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT)		/* KSI_02-07 */
-ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_00-01 */
-GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW)						/* KSO_02 inverted */
-ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_03-09 */
-ALTERNATE(PIN_MASK(0, 0xE0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH)		/* KSO_10-12 */
-
-/* Power Switch Logic (PSL) inputs */
-ALTERNATE(PIN_MASK(0, 0x03), 0, MODULE_PMU, 0)					/* GPIO00, GPIO01 */
-ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, 0)					/* GPIOD2 */
diff --git a/board/delan/led.c b/board/delan/led.c
deleted file mode 100644
index e01ecbb477..0000000000
--- a/board/delan/led.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* Copyright 2018 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "common.h"
-#include "ec_commands.h"
-#include "led_pwm.h"
-#include "util.h"
-
-const enum ec_led_id supported_led_ids[] = {
-	EC_LED_ID_POWER_LED,
-};
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-/*
- * We only have a white and an amber LED, so setting any other colour results in
- * both LEDs being off.
- */
-struct pwm_led led_color_map[EC_LED_COLOR_COUNT] = {
-				/* Amber, White */
-	[EC_LED_COLOR_RED]    = {   0,   0 },
-	[EC_LED_COLOR_GREEN]  = {   0,   0 },
-	[EC_LED_COLOR_BLUE]   = {   0,   0 },
-	[EC_LED_COLOR_YELLOW] = {   0,   0 },
-	[EC_LED_COLOR_WHITE]  = {   0, 100 },
-	[EC_LED_COLOR_AMBER]  = {  100,  0 },
-};
-
-/* One logical LED with amber and white channels. */
-struct pwm_led pwm_leds[CONFIG_LED_PWM_COUNT] = {
-	{
-		PWM_CH_LED1_AMBER,
-		PWM_CH_LED2_WHITE,
-		PWM_LED_NO_CHANNEL,
-	},
-};
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
-	memset(brightness_range, '\0',
-	       sizeof(*brightness_range) * EC_LED_COLOR_COUNT);
-	brightness_range[EC_LED_COLOR_AMBER] = 100;
-	brightness_range[EC_LED_COLOR_WHITE] = 100;
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
-	enum pwm_led_id pwm_id;
-
-	/* Convert ec_led_id to pwm_led_id. */
-	if (led_id == EC_LED_ID_POWER_LED)
-		pwm_id = PWM_LED0;
-	else
-		return EC_ERROR_UNKNOWN;
-
-	if (brightness[EC_LED_COLOR_WHITE])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_WHITE);
-	else if (brightness[EC_LED_COLOR_AMBER])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_AMBER);
-	else
-		/* Otherwise, the "color" is "off". */
-		set_pwm_led_color(pwm_id, -1);
-
-	return EC_SUCCESS;
-}