diff options
| author | Hank.Xie <hank.xie@quanta.corp-partner.google.com> | 2022-08-11 23:30:29 -0400 |
|---|---|---|
| committer | Chromeos LUCI <chromeos-scoped@luci-project-accounts.iam.gserviceaccount.com> | 2022-08-16 08:20:44 +0000 |
| commit | 63432ffff5441d3dfde7fc7c035436c824546ca4 (patch) | |
| tree | 82c8237ab2f672020f98f7cca994435ab63c753b | |
| parent | f809459550d17430aa1c876dd68a2d11bac46ecb (diff) | |
| download | chrome-ec-63432ffff5441d3dfde7fc7c035436c824546ca4.tar.gz | |
shotzo: Remove red led completely
Remove all the code contains "red led".
Modify the code as below:
1.Remove PWR_LED_RED_L.
2.Set gpio A2 as NC pin.
BUG=b:235791717
BRANCH=none
TEST=check power led works fine on shotzo
Signed-off-by: Hank.Xie <hank.xie@quanta.corp-partner.google.com>
Change-Id: Id2a42be260dde6915d2d4b9e329a4e95805ae0b4
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3827452
Reviewed-by: Devin Lu <devin.lu@quantatw.com>
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
| -rw-r--r-- | board/shotzo/gpio.inc | 4 |
1 files changed, 1 insertions, 3 deletions
diff --git a/board/shotzo/gpio.inc b/board/shotzo/gpio.inc index 0c0384be64..e640d9b65f 100644 --- a/board/shotzo/gpio.inc +++ b/board/shotzo/gpio.inc @@ -105,6 +105,7 @@ GPIO(EC_EDID_WRITE_EN_L, PIN(B, 5), GPIO_ODR_HIGH) /* NC pins, enable internal pull-down to avoid floating state. */ GPIO(GPIOA0_NC, PIN(A, 0), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(GPIOA2_NC, PIN(A, 2), GPIO_INPUT | GPIO_PULL_DOWN) GPIO(GPIOA3_NC, PIN(A, 3), GPIO_INPUT | GPIO_PULL_DOWN) GPIO(GPIOC0_NC, PIN(C, 0), GPIO_INPUT | GPIO_PULL_DOWN) GPIO(GPIOC3_NC, PIN(C, 3), GPIO_INPUT | GPIO_PULL_DOWN) @@ -158,8 +159,5 @@ ALTERNATE(PIN_MASK(A, BIT(4) | BIT(5)), 0, MODULE_I2C, 0) /* I2C5 */ ALTERNATE(PIN_MASK(L, BIT(0) | BIT(2) | BIT(3)), 0, MODULE_ADC, 0) /* ADC13: EC_SUB_ANALOG, ADC15: TEMP_SENSOR_3, ADC16: TEMP_SENSOR_4 */ ALTERNATE(PIN_MASK(I, BIT(0) | BIT(2) | BIT(3)), 0, MODULE_ADC, 0) /* ADC0: EC_VSNS_PP3300_A, ADC2: TEMP_SENSOR_1, ADC3: TEMP_SENSOR_2 */ -/* LED */ -GPIO(PWR_LED_RED_L, PIN(A, 1), GPIO_OUT_HIGH) - /* PWM */ ALTERNATE(PIN_MASK(A, BIT(1)), 0, MODULE_PWM, 0) /* LED_WHITE_PWM */ |