mec1322_evb: Remove board

This board is no longer in use.

BUG=None
TEST=`make buildall -j`
BRANCH=None

Change-Id: Ie0d03e0a817ba101c01909f95955d51f8dfae03c
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/314920
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>

7 files changed, 0 insertions, 200 deletions

diff --git a/board/mec1322_evb/Makefile b/board/mec1322_evb/Makefile
deleted file mode 120000
index 94aaae2c4d..0000000000
--- a/board/mec1322_evb/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-../../Makefile
\ No newline at end of file
diff --git a/board/mec1322_evb/board.c b/board/mec1322_evb/board.c
deleted file mode 100644
index 99236b0299..0000000000
--- a/board/mec1322_evb/board.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-/* MEC1322 eval board-specific configuration */
-
-#include "adc.h"
-#include "adc_chip.h"
-#include "fan.h"
-#include "gpio.h"
-#include "i2c.h"
-#include "registers.h"
-#include "spi.h"
-#include "util.h"
-
-#define GPIO_KB_INPUT GPIO_INPUT
-#define GPIO_KB_OUTPUT (GPIO_ODR_HIGH | GPIO_PULL_UP)
-
-#include "gpio_list.h"
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
-	[ADC_CH_1] = {"ADC1", 1, 1, 0, MEC1322_ADC_CH(1)},
-	[ADC_CH_2] = {"ADC2", 1, 1, 0, MEC1322_ADC_CH(2)},
-	[ADC_CH_3] = {"ADC3", 1, 1, 0, MEC1322_ADC_CH(3)},
-	[ADC_CH_4] = {"ADC4", 1, 1, 0, MEC1322_ADC_CH(4)},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/* Physical fans. These are logically separate from pwm_channels. */
-const struct fan_t fans[] = {
-	{.flags = FAN_USE_RPM_MODE,
-	 .rpm_min = 1500,
-	 .rpm_start = 1500,
-	 .rpm_max = 8000,
-	 .ch = 0,
-	 .pgood_gpio = -1,
-	 .enable_gpio = -1,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(fans) == CONFIG_FANS);
-
-/* I2C ports */
-const struct i2c_port_t i2c_ports[] = {
-	{"port0", MEC1322_I2C0_0, 100},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/* SPI master ports */
-const struct spi_device_t spi_devices[] = {
-	{ CONFIG_SPI_FLASH_PORT, 0, GPIO_SHD_CS0},
-};
-const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices);
-
-const enum gpio_signal hibernate_wake_pins[] = {
-	GPIO_S1,
-};
-
-const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins);
diff --git a/board/mec1322_evb/board.h b/board/mec1322_evb/board.h
deleted file mode 100644
index 639c41a180..0000000000
--- a/board/mec1322_evb/board.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* MEC1322 eval board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* Optional features */
-#define CONFIG_SYSTEM_UNLOCKED  /* Allow dangerous commands */
-#define CONFIG_WATCHDOG_HELP
-#define CONFIG_FANS 1
-#define CONFIG_ADC
-#define CONFIG_FLASH_SIZE 0x00800000
-#define CONFIG_I2C
-#define CONFIG_I2C_MASTER
-#define CONFIG_SPI_FLASH_W25Q64
-#define CONFIG_SPI_FLASH_PORT 0
-
-/* Modules we want to exclude */
-#undef CONFIG_EEPROM
-#undef CONFIG_PSTORE
-#undef CONFIG_LID_SWITCH
-#undef CONFIG_PECI
-#undef CONFIG_SWITCH
-
-#ifndef __ASSEMBLER__
-
-enum adc_channel {
-	ADC_CH_1 = 0,
-	ADC_CH_2,
-	ADC_CH_3,
-	ADC_CH_4,
-
-	ADC_CH_COUNT
-};
-
-#include "gpio_signal.h"
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/mec1322_evb/build.mk b/board/mec1322_evb/build.mk
deleted file mode 100644
index 5f03511802..0000000000
--- a/board/mec1322_evb/build.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-# -*- makefile -*-
-# Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-# the IC is SMSC MEC1322
-CHIP:=mec1322
-
-board-y=board.o
diff --git a/board/mec1322_evb/ec.tasklist b/board/mec1322_evb/ec.tasklist
deleted file mode 100644
index 09bcb6e06c..0000000000
--- a/board/mec1322_evb/ec.tasklist
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/**
- * List of enabled tasks in the priority order
- *
- * The first one has the lowest priority.
- *
- * For each task, use the macro TASK_ALWAYS(n, r, d, s) for base tasks and
- * TASK_NOTEST(n, r, d, s) for tasks that can be excluded in test binaries,
- * where :
- * 'n' in the name of the task
- * 'r' in the main routine of the task
- * 'd' in an opaque parameter passed to the routine at startup
- * 's' is the stack size in bytes; must be a multiple of 8
- */
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, TASK_STACK_SIZE)
diff --git a/board/mec1322_evb/gpio.inc b/board/mec1322_evb/gpio.inc
deleted file mode 100644
index 8bb7cf29aa..0000000000
--- a/board/mec1322_evb/gpio.inc
+++ /dev/null
@@ -1,45 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-GPIO(LED1,       PIN(154), GPIO_ODR_LOW)
-GPIO(LED2,       PIN(155), GPIO_ODR_HIGH)
-GPIO(LED3,       PIN(156), GPIO_ODR_LOW)
-GPIO(PCH_SMI_L,  PIN(44),  GPIO_ODR_HIGH) /* SMI output */
-GPIO(PCH_WAKE_L, PIN(200), GPIO_ODR_HIGH) /* PCH wake pin */
-
-/* Switch S1 */
-GPIO(S1,         PIN(63),  GPIO_INT_FALLING | GPIO_PULL_UP)
-
-/* Shared SPI CS */
-GPIO(SHD_CS0,    PIN(150), GPIO_ODR_HIGH)
-
-/*
- * Signals which aren't implemented on MEC1322 eval board but we'll
- * emulate anyway, to make it more convenient to debug other code.
- */
-UNIMPLEMENTED(RECOVERY_L)  /* Recovery signal from DOWN button */
-UNIMPLEMENTED(WP_L)        /* Write protect input */
-UNIMPLEMENTED(ENTERING_RW) /* EC entering RW code */
-
-ALTERNATE(PIN_MASK(16, 0x24),     1, MODULE_UART,    0) /* UART0 */
-ALTERNATE(PIN_MASK(3,  (1 << 4)), 3, MODULE_PWM_FAN, 0)
-ALTERNATE(PIN_MASK(14, (1 << 0)), 3, MODULE_PWM_FAN, 0)
-/*
- * I2C0: External pull-up resistors on EVB are too weak. Let's
- * also enable internal pull-up here.
- */
-ALTERNATE(PIN_MASK(1,  0x60), 2, MODULE_I2C,           GPIO_PULL_UP)
-ALTERNATE(PIN_MASK(0,  0xfe), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)
-ALTERNATE(PIN_MASK(1,  0x03), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)
-ALTERNATE(PIN_MASK(3,  0x04), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)
-ALTERNATE(PIN_MASK(4,  0x0d), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)
-ALTERNATE(PIN_MASK(10, 0xd8), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT)
-ALTERNATE(PIN_MASK(12, 0x60), 2, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)
-ALTERNATE(PIN_MASK(14, 0x14), 3, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT)
-ALTERNATE(PIN_MASK(2,  0x20), 2, MODULE_LPC,           0)
-ALTERNATE(PIN_MASK(12, 0x14), 1, MODULE_SPI,           0)
-ALTERNATE(PIN_MASK(6,  0x10), 1, MODULE_SPI,           0)
diff --git a/board/mec1322_evb/lfw/gpio.inc b/board/mec1322_evb/lfw/gpio.inc
deleted file mode 100644
index 205330262c..0000000000
--- a/board/mec1322_evb/lfw/gpio.inc
+++ /dev/null
@@ -1,17 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Minimal set of GPIOs needed for LFW loader
- */
-
-GPIO(PVT_CS0,           PIN(146), GPIO_ODR_HIGH)                 /* SPI PVT Chip select */
-GPIO(SHD_CS0,           PIN(150), GPIO_ODR_HIGH)
-
-/* Alternate functions GPIO definition */
-ALTERNATE(PIN_MASK(16,     0x24),   1,      MODULE_UART,            0)                      /* UART0 */
-ALTERNATE(PIN_MASK(5,      0x10),   1,      MODULE_SPI,             0)
-ALTERNATE(PIN_MASK(16,     0x10),   1,      MODULE_SPI,             0)
-ALTERNATE(PIN_MASK(15,     0x08),   1,      MODULE_SPI,             0)                      /* 153: CLK */