Brya: Enable charger chip

This adds the charger chip support code.

BRANCH=none
BUG=b:173575131,b:180784200
TEST=with reset of CQ-Depend patches, brya boots to AP

Change-Id: I1b220376cb03197e13aad65f1e79692eaf8fb1e1
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2700316
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>

3 files changed, 109 insertions, 0 deletions

diff --git a/baseboard/brya/baseboard.h b/baseboard/brya/baseboard.h
index 73e3b40868..fffec3b807 100644
--- a/baseboard/brya/baseboard.h
+++ b/baseboard/brya/baseboard.h
@@ -31,6 +31,26 @@
 #define CONFIG_HOSTCMD_ESPI
 #define CONFIG_HOSTCMD_ESPI_VW_SLP_S4
 
+/* Common charger defines */
+#define CONFIG_CHARGE_MANAGER
+#define CONFIG_CHARGER
+#define CONFIG_CHARGER_DISCHARGE_ON_AC
+#define CONFIG_CHARGER_INPUT_CURRENT		512
+
+#define CONFIG_CMD_CHARGER_DUMP
+
+#define CONFIG_USB_CHARGER
+#define CONFIG_BC12_DETECT_PI3USB9201
+
+/*
+ * Don't allow the system to boot to S0 when the battery is low and unable to
+ * communicate on locked systems (which haven't PD negotiated)
+ */
+#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT	15000
+#define CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON			3
+#define CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON_WITH_AC		1
+#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON		15001
+
 /* Common battery defines */
 #define CONFIG_BATTERY_SMART
 #define CONFIG_BATTERY_FUEL_GAUGE
diff --git a/baseboard/brya/build.mk b/baseboard/brya/build.mk
index e584ac342c..983fa50a0a 100644
--- a/baseboard/brya/build.mk
+++ b/baseboard/brya/build.mk
@@ -10,3 +10,4 @@ baseboard-y=
 baseboard-y+=battery_presence.o
 baseboard-y+=cbi_ec_fw_config.o
 baseboard-y+=cbi.o
+baseboard-y+=charger.o
diff --git a/baseboard/brya/charger.c b/baseboard/brya/charger.c
new file mode 100644
index 0000000000..d55503ea81
--- /dev/null
+++ b/baseboard/brya/charger.c
@@ -0,0 +1,88 @@
+/* Copyright 2021 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+#include "common.h"
+
+#include "charger.h"
+#include "charge_manager.h"
+#include "driver/charger/bq25710.h"
+#include "usbc_ppc.h"
+#include "usb_pd.h"
+#include "util.h"
+
+#include "charge_state_v2.h"
+
+#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
+#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args)
+
+/* Charger Chip Configuration */
+const struct charger_config_t chg_chips[] = {
+	{
+		.i2c_port = I2C_PORT_CHARGER,
+		.i2c_addr_flags = BQ25710_SMBUS_ADDR1_FLAGS,
+		.drv = &bq25710_drv,
+	},
+};
+BUILD_ASSERT(ARRAY_SIZE(chg_chips) == CHARGER_NUM);
+
+int board_set_active_charge_port(int port)
+{
+	int is_valid_port = board_is_usb_pd_port_present(port);
+	int i;
+
+	if (port == CHARGE_PORT_NONE) {
+		CPRINTSUSB("Disabling all charger ports");
+
+		/* Disable all ports. */
+		for (i = 0; i < ppc_cnt; i++) {
+			/*
+			 * Do not return early if one fails otherwise we can
+			 * get into a boot loop assertion failure.
+			 */
+			if (ppc_vbus_sink_enable(i, 0))
+				CPRINTSUSB("Disabling C%d as sink failed.", i);
+		}
+
+		return EC_SUCCESS;
+	} else if (!is_valid_port) {
+		return EC_ERROR_INVAL;
+	}
+
+	/* Check if the port is sourcing VBUS. */
+	if (ppc_is_sourcing_vbus(port)) {
+		CPRINTFUSB("Skip enable C%d", port);
+		return EC_ERROR_INVAL;
+	}
+
+	CPRINTSUSB("New charge port: C%d", port);
+
+	/*
+	 * Turn off the other ports' sink path FETs, before enabling the
+	 * requested charge port.
+	 */
+	for (i = 0; i < ppc_cnt; i++) {
+		if (i == port)
+			continue;
+
+		if (ppc_vbus_sink_enable(i, 0))
+			CPRINTSUSB("C%d: sink path disable failed.", i);
+	}
+
+	/* Enable requested charge port. */
+	if (ppc_vbus_sink_enable(port, 1)) {
+		CPRINTSUSB("C%d: sink path enable failed.", port);
+		return EC_ERROR_UNKNOWN;
+	}
+
+	return EC_SUCCESS;
+}
+
+__overridable void board_set_charge_limit(int port, int supplier, int charge_ma,
+					  int max_ma, int charge_mv)
+{
+	charge_set_input_current_limit(MAX(charge_ma,
+					   CONFIG_CHARGER_INPUT_CURRENT),
+				       charge_mv);
+}