Dedede: Move waddledee chips out of baseboard

Moves chip specifics (ex. charger, TCPC) from baseboard out to the
waddledee board files in anticipation of Wheelie.

BRANCH=None
BUG=None
TEST=make -j buildall

Signed-off-by: Diana Z <dzigterman@chromium.org>
Change-Id: I99bf33d683cc89e6508fbbe305cd0b4c05a53090
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2157949
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>

1 files changed, 0 insertions, 247 deletions

diff --git a/baseboard/dedede/variant_ec_it8320.c b/baseboard/dedede/variant_ec_it8320.c
index ed1d13b360..62a5f3f32a 100644
--- a/baseboard/dedede/variant_ec_it8320.c
+++ b/baseboard/dedede/variant_ec_it8320.c
@@ -7,26 +7,14 @@
 
 #include "adc_chip.h"
 #include "atomic.h"
-#include "charge_manager.h"
-#include "charge_state_v2.h"
-#include "charger.h"
-#include "chipset.h"
 #include "common.h"
 #include "compile_time_macros.h"
 #include "console.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/charger/sm5803.h"
-#include "driver/tcpm/anx7447.h"
-#include "driver/tcpm/it83xx_pd.h"
 #include "gpio.h"
 #include "hooks.h"
 #include "i2c.h"
 #include "power.h"
-#include "pwm.h"
-#include "pwm_chip.h"
 #include "registers.h"
-#include "tcpci.h"
-#include "usb_pd_tcpm.h"
 
 #define CPRINTUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
 
@@ -101,33 +89,6 @@ const struct vcmp_t vcmp_list[] = {
 BUILD_ASSERT(ARRAY_SIZE(vcmp_list) <= CHIP_VCMP_COUNT);
 BUILD_ASSERT(ARRAY_SIZE(vcmp_list) == VCMP_COUNT);
 
-/* BC12 chips */
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	{
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-	{
-		.i2c_port = I2C_PORT_SUB_USB_C1,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-
-/* Charger chips */
-const struct charger_config_t chg_chips[] = {
-	[CHARGER_PRIMARY] = {
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = SM5803_ADDR_CHARGER_FLAGS,
-		.drv = &sm5803_drv,
-	},
-	[CHARGER_SECONDARY] = {
-		.i2c_port = I2C_PORT_SUB_USB_C1,
-		.i2c_addr_flags = SM5803_ADDR_CHARGER_FLAGS,
-		.drv = &sm5803_drv,
-	},
-};
-const unsigned int chg_cnt = ARRAY_SIZE(chg_chips);
-
 /* I2C Ports */
 const struct i2c_port_t i2c_ports[] = {
 	{
@@ -157,211 +118,3 @@ const struct i2c_port_t i2c_ports[] = {
 };
 const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
 
-/* TCPCs */
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
-	{
-		.bus_type = EC_BUS_TYPE_EMBEDDED,
-		.drv = &it83xx_tcpm_drv,
-	},
-	{
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_SUB_USB_C1,
-			.addr_flags = AN7447_TCPC0_I2C_ADDR_FLAGS,
-		},
-		.drv = &anx7447_tcpm_drv,
-		.flags = TCPC_FLAGS_TCPCI_REV2_0,
-	},
-};
-
-uint16_t tcpc_get_alert_status(void)
-{
-	/*
-	 * TCPC 0 is embedded in the EC and processes interrupts in the chip
-	 * code (it83xx/intc.c)
-	 */
-
-	uint16_t status = 0;
-	int regval;
-
-	/* Check whether TCPC 1 pulled the shared interrupt line */
-	if (!gpio_get_level(GPIO_USB_C1_INT_ODL)) {
-		if (!tcpc_read16(1, TCPC_REG_ALERT, &regval)) {
-			if (regval)
-				status = PD_STATUS_TCPC_ALERT_1;
-		}
-	}
-
-	return status;
-}
-
-int extpower_is_present(void)
-{
-	int chg0 = 0;
-	int chg1 = 0;
-
-	sm5803_get_chg_det(0, &chg0);
-	sm5803_get_chg_det(1, &chg1);
-
-	return chg0 || chg1;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma, int max_ma,
-			    int charge_mv)
-{
-	int icl = MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT);
-
-	/*
-	 * TODO(b/151955431): Characterize the input current limit in case a
-	 * scaling needs to be applied here
-	 */
-	charge_set_input_current_limit(icl, charge_mv);
-}
-
-int board_set_active_charge_port(int port)
-{
-	int is_valid_port = (port >= 0 && port < CONFIG_USB_PD_PORT_MAX_COUNT);
-	int p0_otg, p1_otg;
-
-	if (!is_valid_port && port != CHARGE_PORT_NONE)
-		return EC_ERROR_INVAL;
-
-	/* TODO(b/147440290): charger functions should take chgnum */
-	p0_otg = chg_chips[0].drv->is_sourcing_otg_power(0, 0);
-	p1_otg = chg_chips[1].drv->is_sourcing_otg_power(1, 1);
-
-	if (port == CHARGE_PORT_NONE) {
-		CPRINTUSB("Disabling all charge ports");
-
-		if (!p0_otg)
-			chg_chips[0].drv->set_mode(0,
-						   CHARGE_FLAG_INHIBIT_CHARGE);
-		if (!p1_otg)
-			chg_chips[1].drv->set_mode(1,
-						   CHARGE_FLAG_INHIBIT_CHARGE);
-
-		return EC_SUCCESS;
-	}
-
-	CPRINTUSB("New chg p%d", port);
-
-	/*
-	 * Charger task will take care of enabling charging on the new charge
-	 * port.  Here, we ensure the other port is not charging by changing
-	 * CHG_EN
-	 */
-	if (port == 0) {
-		if (p0_otg) {
-			CPRINTUSB("Skip enable p%d", port);
-			return EC_ERROR_INVAL;
-		}
-		if (!p1_otg) {
-			chg_chips[1].drv->set_mode(1,
-						   CHARGE_FLAG_INHIBIT_CHARGE);
-		}
-	} else {
-		if (p1_otg) {
-			CPRINTUSB("Skip enable p%d", port);
-			return EC_ERROR_INVAL;
-		}
-		if (!p0_otg) {
-			chg_chips[0].drv->set_mode(0,
-						   CHARGE_FLAG_INHIBIT_CHARGE);
-		}
-	}
-
-	return EC_SUCCESS;
-}
-
-/* Vconn control for integrated ITE TCPC */
-void board_pd_vconn_ctrl(int port, enum usbpd_cc_pin cc_pin, int enabled)
-{
-	/* Vconn control is only for port 0 */
-	if (port)
-		return;
-
-	if (cc_pin == USBPD_CC_PIN_1)
-		gpio_set_level(GPIO_EN_USB_C0_CC1_VCONN, !!enabled);
-	else
-		gpio_set_level(GPIO_EN_USB_C0_CC2_VCONN, !!enabled);
-}
-
-__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp)
-{
-	int current;
-
-	if (port < 0 || port > CONFIG_USB_PD_PORT_MAX_COUNT)
-		return;
-
-	current = (rp == TYPEC_RP_3A0) ? 3000 : 1500;
-
-	chg_chips[port].drv->set_otg_current_voltage(port, current, 5000);
-}
-
-
-int pd_check_vconn_swap(int port)
-{
-	/* Allow VCONN swaps if the AP is on */
-	return chipset_in_state(CHIPSET_STATE_ANY_SUSPEND | CHIPSET_STATE_ON);
-}
-
-void pd_power_supply_reset(int port)
-{
-	int prev_en;
-
-	if (port < 0 || port >= CONFIG_USB_PD_PORT_MAX_COUNT)
-		return;
-
-	/* TODO(b/147440290): charger functions should take chgnum */
-	prev_en = chg_chips[port].drv->is_sourcing_otg_power(port, port);
-
-	/* Disable Vbus */
-	chg_chips[port].drv->enable_otg_power(port, 0);
-
-	/* Discharge Vbus if previously enabled */
-	if (prev_en)
-		sm5803_set_vbus_disch(port, 1);
-
-#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT
-	/* Give back the current quota we are no longer using */
-	charge_manager_source_port(port, 0);
-#endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */
-
-	/* Notify host of power info change. */
-	pd_send_host_event(PD_EVENT_POWER_CHANGE);
-}
-
-int pd_set_power_supply_ready(int port)
-{
-	enum ec_error_list rv;
-
-	/* Disable charging */
-	rv = chg_chips[port].drv->set_mode(port, CHARGE_FLAG_INHIBIT_CHARGE);
-	if (rv)
-		return rv;
-
-	/* Disable Vbus discharge */
-	sm5803_set_vbus_disch(port, 0);
-
-	/* Provide Vbus */
-	chg_chips[port].drv->enable_otg_power(port, 1);
-
-#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT
-	/* Ensure we advertise the proper available current quota */
-	charge_manager_source_port(port, 1);
-#endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */
-
-	/* Notify host of power info change. */
-	pd_send_host_event(PD_EVENT_POWER_CHANGE);
-
-	return EC_SUCCESS;
-}
-
-int pd_snk_is_vbus_provided(int port)
-{
-	int chg_det = 0;
-
-	sm5803_get_chg_det(port, &chg_det);
-
-	return chg_det;
-}